Architectural Product Catalog

Transcription

Architectural Pricing Guide
TABLE OF CONTENTS
Panels
LokSeam® Series
Craftsman™ Series
Classic® Series
ShadowRib™
MasterLine Series
NuWall®
Designer™ Series
FW and IL Panels
Artisan® Series
FlexLoc® Series
QwikLok™
2
4
10
11
12
13
14
16
18
21
22
Accessories
LiteFrame
Flat Sheets and Coils
Batten Caps and Couplers
Transition Fillers
Rib Covers
Clips
Bearing Plates, Angles and Rake Support
Support Plates
Bearing Plates, Angles and Rake Support
Back-Up Plates
Tape Sealer
Tube Sealant
Vent Material
Reflective Insulation
Closures
Panel Hemming Tool
Touch-up Paint
23
25
28
29
29
30
32
33
34
35
35
36
36
36
37
39
39
Trim
Roofing, Facade and Non-Load Bearing Walls
MasterLine
ShadowRib™
NuWall®
Designer™
FlexLoc®
FW 120
Canopy
Custom Trim
Subject to change without notice.
See WWW.MBCI.COM for current information.
40
57
61
65
68
70
71
73
76
EFFECTIVE AUGUST 10, 2015
1
Architectural Pricing
PANELS
LokSeam® Series 12"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
26
26
12"
12"
50,000
50,000
124#
124#
Galvalume Plus® ¤
Signature® 200 *
Please Inquire
Please Inquire
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
154#
154#
154#
154#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Signature® 300 Metallic *
Please Inquire
ü†
ü†
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
193#
193#
193#
193#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16"
16"
16"
16"
50,000
50,000
50,000
50,000
146#
146#
146#
146#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
16"
16"
16"
16"
50,000
50,000
50,000
50,000
184#
184#
184#
184#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
ü
* See Architectural Color Chart for available colors
† Minimum quantities may be required for some colors. Please inquire.
Signature is a registered trademark of NCI Group, Inc. Galvalume Plus is a registered and protected trademark of BIEC International, Inc.
¤ The Galvalume Plus coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels. The Galvalume Plus coating
is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is
required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus. Shade variation in panels manufactured from Galvalume Plus coated material do not
diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection.
IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects
including excessive oil canning. Installation of material constitutes acceptance.
2
PANELS
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
18"
18"
18"
18"
50,000
50,000
50,000
50,000
146#
146#
146#
146#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
18"
18"
18"
18"
50,000
50,000
50,000
50,000
184#
184#
184#
184#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI LOKSEAM® DESIGN AND INSTALLATION MANUAL for proper product application, design details and
other product information.
Panel Pricing:
1.
2.
3.
4.
5.
6.
All pricing is based on net coverage and include standard packaging.
Minimum quantities may be required for certain panel gauges and/or colors. Please Inquire.
For short panel lengths, add: $3.70 per panel for panels 4'-0" in length and shorter.
Panels must be specified as: "Striated", or "Non-Striated". No charge for Striations.
Add $8.00 per square for embossing.
Panels may be specified as: "Notched" for folding hem at eave. Add 3 inches to panel length. Notching charge $1.10 per panel. If notching is requested,
panels will be notched 1 1/2" at both ends. Note: Notching is only available for Blank Panels.
7. Panels must be specified as "blank" (no endlaps),"eave", "mid", or "peak" (when endlaps are required).
8. For panels with swaged ends (required at endlaps), add $5.15 per panel. Panels less than 4'-0" can not be swaged.
9. See Page 30 for clip selection.
10. Panel price includes mastic. For panels without mastic in the sidelap, deduct:
$4.20 per square for 18" wide panels.
Packaging Cost:
1.
2.
3.
4.
5.
Standard packaging: Block and band with strippable film on female rib of painted panels. Galvalume Plus panels will have microfoam interleafing.
Optional interleafing: Microfoam interleafing: available at $0.10 per square foot.
LTL shipments require plywood crating with microfoam interleafing.
Plywood crating with strippable film on panels .....................................................................................................................$15.50/lf of bundle. $200.00 minimum.
Special packaging ................................................................................................................................................................................................................. Please inquire
Delivery:
1.
2.
3.
24 gauge - stocked colors .......................................................................................................................................................................Approximately 10 working days
26 gauge not available for 16" or 18" wide panels.
Other gauges, colors and metals .........................................................................................................................................................................................Please inquire
Notes:
1.
2.
3.
4.
All panel lengths over 40'-0" ................................................................................................................................................................................................Please inquire
Striations are recommended on 18", 16" and 12" panels; MBCI standard will include light striations. If non-striated panels are required,
customer must specify in writing on order and sign MBCI Striation Waiver to Production.
Heavier gauges, narrower widths, striations and embossing may minimize oil canning.
Panel lengths 4'-0" or less do not have factory applied mastic.
3
PANELS
Craftsman™ Series - Small Batten 12"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
26
26
12"
12"
50,000
50,000
108#
108#
Galvalume Plus® ¤
Signature® 200 *
Please Inquire
Please Inquire
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
139#
139#
139#
139#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
174#
174#
174#
174#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI CRAFTSMAN™ DESIGN AND INSTALLATION MANUAL for proper product application, design details
and other product information.
Panel Pricing:
1.
2.
3.
4.
5.
All pricing is based on net coverage.
Pricing includes pans only and standard packaging. 24 gauge battens with mastic and clips are sold separately. Pricing
does not include clip fasteners. See component accessory prices.
Packaging Cost:
1. Standard packaging: Block and band with strippable film on female rib of painted panels. Galvalume Plus panels will have
microfoam interleafing.
2. Lengths greater than 20'-0" require plywood crating.
3. LTL shipments require plywood crating.
4. Plywood crating: ...........................................................................................................Add $15.50/lf of bundle - $200.00 minimum.
5. Special packaging ............................................................................................................................................................ Please inquire
Delivery:
1. 26 and 24 gauge stocked colors .......................................................................................................Approximately 10 working days
2. Other gauges, colors and metals .................................................................................................................................. Please inquire
Notes:
1.
2.
3.
4.
5.
6.
26 gauge panel lengths longer than 10'-0 .................................................................................................................... Please inquire
24 and 22 gauge panel lengths over 40'-0" .................................................................................................................. Please inquire
All panels not installed over a solid substructure ....................................................................................................... Please inquire
Batten length will be equal to panel length unless there is a slope change.
Slope change: For each slope change add two inches (2") to each batten and one (1) extra clip.
Heavier gauges, narrower widths and embossing may minimize oil canning.
4
PANELS
Craftsman™ Series - Small Batten 161/2"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
131#
131#
131#
131#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
163#
163#
163#
163#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
4. Plywood crating: .......................................................................................Add $15.50/lf of bundle per square - $200.00 minimum.
Delivery:
1. 24 gauge stocked colors ....................................................................................................................Approximately 10 working days
Notes:
1.
2.
3.
4.
5.
Lengths longer than 40'-0" ............................................................................................................................................. Please inquire
5
PANELS
Craftsman™ Series - Large Batten 12"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
26
26
12"
12"
50,000
50,000
134#
134#
Galvalume Plus® ¤
Signature® 200 *
Please Inquire
Please Inquire
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
169#
169#
169#
169#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
210#
210#
210#
210#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
Delivery:
1. 26 and 24 gauge stocked colors .......................................................................................................Approximately 10 working days
Notes:
1.
2.
3.
4.
5.
6.
26 gauge panel lengths longer than 10'-0 .................................................................................................................... Please inquire
24 and 22 gauge panel lengths over 40'-0" .................................................................................................................. Please inquire
6
PANELS
Craftsman™ Series - Large Batten 161/2"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
152#
152#
152#
152#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
190#
190#
190#
190#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
Delivery:
1. 24 gauge stocked colors ...................................................................................................................Approximately 10 working days
Notes:
1.
2.
3.
4.
5.
7
PANELS
Craftsman™ Series - High Batten 12"
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
26
26
12"
12"
50,000
50,000
127#
127#
Galvalume
¤
Signature® 200 *
Please Inquire
Please Inquire
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
161#
161#
161#
161#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
202#
202#
202#
202#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
4. Plywood crating: ............................................................................................................Add $15.50/lf of bundle. $200.00 minimum.
Delivery:
1. 26 and 24 gauge stocked colors ...................................................................................................... Approximately 10 working days
Notes:
1.
2.
3.
4.
5.
6.
26 gauge panels - lengths longer than - 10'-0" ............................................................................................................ Please inquire
24 and 22 gauge panels lengths longer than 40'-0" Please inquire
8
PANELS
Craftsman™ Series - High Batten 161/2"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
142#
142#
142#
142#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
16 1/2"
16 1/2"
16 1/2"
16 1/2"
50,000
50,000
50,000
50,000
180#
180#
180#
180#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
Delivery:
Notes:
1.
2.
3.
4.
5.
9
PANELS
Classic® Series 12" and 16"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
12"
12"
50,000
50,000
180#
180#
Galvalume Plus® ¤
Signature® 200 *
ü
ü
22
22
12"
12"
50,000
50,000
226#
226#
Galvalume Plus® ¤
Signature® 200 *
ü
ü
24
24
24
16"
16"
16"
50,000
50,000
50,000
146#
146#
146#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
22
22
16"
16"
50,000
50,000
202#
202#
Galvalume Plus® ¤
Signature® 200 *
ü
ü
Consult the MBCI ARCHITECTURAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application,
design details and other product information.
Panel Pricing:
1.
2.
3.
4.
5.
Prices do not include standard packaging.
Packaging Cost:
1.
2.
3.
4.
5.
22 panels per bundle: Maximum 3000# per bundle.
Block and band with strippable film on panels ......................................................................$1.40/lf of bundle $30.00 minimum.
Block and band and waterproof paper wrap with strippable film on panels .....................$2.00/lf of bundle $30.00 minimum.
LTL Package - Plywood crating with strippable film on panels ......................................$15.50/lf of bundle - $200.00 minimum.
Special packaging ............................................................................................................................................................ Please inquire
Delivery:
Notes:
1. Specify which side of panel should be painted (Top or Bottom).
2. All panels - lengths longer than 40'-0" .......................................................................................................................... Please inquire
3. Heavier gauges, narrower widths and embossing may minimize oil canning.
10
PANELS
ShadowRib™ 16"
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16"
16"
16"
16"
50,000
50,000
50,000
50,000
175#
175#
175#
175#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
ü
22
22
22
22
16"
16"
16"
16"
50,000
50,000
50,000
50,000
219#
219#
219#
219#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI SHADOWRIB™ DESIGN/INSTALLATION MANUAL for proper product application, design details and
other product information.
Panel Pricing:
1.
2.
3.
4.
5.
6.
See pages 32 and 33 for clip selection.
Packaging Cost:
1.
2.
3.
4.
5.
Block and band with strippable film on panels .................................................................... $1.40/lf of bundle. $30.00 minimum.
Block and band and waterproof paper wrap with strippable film on panels....................$2.00/lf of bundle. $30.00 minimum.
LTL Package - Plywood crating with strippable film on panels........................................$15.50/lf of bundle. $200.00 minimum.
Delivery:
Notes:
11
PANELS
MasterLine 16
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16"
16"
16"
16"
50,000
50,000
50,000
50,000
146#
146#
146#
146#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü
ü
ü
22
22
22
22
16"
16"
16"
16"
50,000
50,000
50,000
50,000
186#
186#
186#
186#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
20
20
20
20
16"
16"
16"
16"
50,000
50,000
50,000
50,000
226#
226#
226#
226#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
18
18
18
18
16"
16"
16"
16"
50,000
50,000
50,000
50,000
298#
298#
298#
298#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI MasterLine 16 TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application,
Panel Pricing:
1.
2.
3.
4.
5.
6.
All prices include standard packaging.
All prices include factory mastic. For panels without mastic, deduct $3.75 per square.
Packaging Cost:
1.
2.
3.
4.
5.
6.
Standard packaging: Cardboard carton with strippable film across panel flat. 24 panels per box.
Optional interleafing: Microfoam interleafing: available at $.10 per square foot.
Lengths greater than 20"-0" require plywood crating.
LTL shipments require plywood crating with strippable film on panels.
Plywood crating: ................................................................................................................................................Add $15.50/lf of bundle - $200.00 minimum.
Special packaging ...................................................................................................................................................................................................Please inquire
Delivery:
1.
2.
24 gauge - stocked colors Approximately 10 working days
Other gauges, colors and metals .........................................................................................................................................................................Please inquire
Notes:
1.
2.
3.
Smooth panels - lengths longer than 35'-0" .......................................................................................................................................................Please inquire
Embossed panels - lengths longer than 30'-0" ...................................................................................................................................................Please inquire
Heavier gauges and embossing may minimize oil canning.
12
PANELS
NuWall® 12"
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
179#
179#
179#
179#
Galvalume
¤
Signature® 200 *
Signature® 300 *
ü
ü†
ü†
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
228#
228#
228#
228#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI NUWALL® TECHNICAL/PRODUCT MANUAL for proper product application, design details and other
product information.
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
Standard packaging: Cardboard carton with strippable film across panel flat.
Lengths greater than 20'-0" require plywood crating.
Plywood crating with strippable film on panels: ..............................................................$15.50/lf of bundle - $200.00 minimum.
Delivery:
Notes:
13
PANELS
Designer™ Series 12" - Flat
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
159#
159#
159#
159#
Galvalume
¤
Signature® 200 *
Signature® 300 *
ü
ü†
ü†
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
202#
202#
202#
202#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI Designer™ TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design
details and other product information.
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
6.
Optional interleafing: Microfoam interleafing available at $0.10 per square foot.
Plywood crating: ........................................................................................................... Add $15.50/lf of bundle. $200.00 minimum.
Delivery:
Notes:
1. Smooth panels - lengths longer than 24'-0" .................................................................................................................Please inquire
2. Embossed panels - lengths longer than 30'-0" ............................................................................................................ Please inquire
14
PANELS
Designer™ Series 16" - Fluted
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
16"
16"
16"
16"
50,000
50,000
50,000
50,000
146#
146#
146#
146#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
16"
16"
16"
16"
50,000
50,000
50,000
50,000
186#
186#
186#
186#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Consult the MBCI Designer™ TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design
details and other product information.
Panel Pricing:
1.
2.
3.
4.
5.
Packaging Cost:
1.
2.
3.
4.
5.
6.
Optional interleafing: Microfoam interleafing available at $0.10 per square foot.
Plywood crating: ............................................................................................................Add $15.50/lf of bundle. $200.00 minimum.
Delivery:
Notes:
1. Smooth panels - lengths longer than 35'-0" .................................................................................................................Please inquire
2. Embossed panels - lengths longer than 45'-0" ............................................................................................................ Please inquire
15
PANELS
FW-120 Panel
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
12"
50,000
154#
Signature® 300 *
ü†
22
12"
50,000
193#
Signature® 300 *
Please Inquire
20
12"
50,000
244#
Signature® 300 *
Please Inquire
Consult the MBCI FW-120® AND IL PANEL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product
application, design details and other product information.
Panel Pricing:
1.
2.
3.
4.
5.
All prices include factory applied sealant in the panel side joint.
Packaging Cost:
1.
2.
3.
4.
5.
6.
Standard packaging: Cardboard carton with strippable film on panels.
LTL shipments require plywood crating.
Delivery:
Notes:
1. Panel lengths over 30'-0" ................................................................................................................................................Please inquire
3. Panel lengths 4'-0" or less do not have factory applied mastic.
16
PANELS
IL Panel
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
18"
24"
50,000
50,000
135#
127#
Signature® 200 * - White Only
ü
ü†
22
22
18"
24"
50,000
50,000
162#
153#
Please Inquire
Please Inquire
Consult the MBCI FW-120® AND IL PANEL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product
application, design details and other product information.
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
6.
All IL-180 panel lengths greater than 20'-0" require plywood crating.
All IL-240 panel lengths require plywood crating.
Delivery:
1. 24 gauge - White .................................................................................................................................Approximately 10 working days
Notes:
1.
2.
3.
4.
Panel lengths over 30'-0" ................................................................................................................................................Please inquire
The panel side joint does not include factory applied sealant.
Not recommended for exterior wall applications or as a stand alone interior liner panel.
Heavier gauges, narrower widths, embossing and beads may minimize oil canning.
17
PANELS
Artisan® Series 8"
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
26
26
8"
8"
50,000
50,000
115#
115#
Galvalume
*
Signature® 200 *
ü
ü†
24
24
24
24
8"
8"
8"
8"
50,000
50,000
50,000
50,000
148#
148#
148#
148#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
8"
8"
8"
8"
50,000
50,000
50,000
50,000
186#
186#
186#
186#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
For short panel lengths, add: $3.70 per panel for panels 4 '-0" in length and shorter.
Packaging Cost:
1.
2.
3.
4.
5.
Special packaging ............................................................................................................................................................ Please Inquire
Delivery:
1. 26 gauge - Signature® 200 White and Burnished Slate ..................................................................Approximately 5 Working Days
2. 24 gauge - stocked colors .Approximately 5 Working Days
3. Other gauges, colors and metals .................................................................................................................................. Please Inquire
Notes:
1.
2.
3.
4.
5.
26 gauge panels - lengths longer than 5'-0" ................................................................................................................ Please Inquire
24 gauge and 22 gauge lengths over 20-0" Please Inquire
26 gauge panels are to be used for soffit conditions only.
Not recommended for exterior wall applications.
18
PANELS
Artisan® Series 10"
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
26
26
10"
10"
50,000
50,000
108#
108#
Galvalume
*
Signature® 200 *
ü
ü†
24
24
24
24
10"
10"
10"
10"
50,000
50,000
50,000
50,000
138#
138#
138#
138#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
10"
10"
10"
10"
50,000
50,000
50,000
50,000
174#
174#
174#
174#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
Delivery:
1. 26 gauge - Signature® 200 White and Burnished Slate ...................................................................Approximately 5 working days
2. 24 gauge - stocked colors ....................................................................................................................Approximately 5 working days
Notes:
1.
2.
3.
4.
5.
26 gauge panels - lengths longer than 5'-0" .................................................................................................................Please inquire
24 gauge and 22 gauge lengths over 10'-0" ................................................................................................................. Please inquire
26 gauge panels are to be used for soffit conditions only.
Not recommended for exterior wall applications.
19
PANELS
Artisan® Series 12"
DESCRIPTION
GAUGE
COVERAGE
YIELD (PSI)
PRICED PER SQUARE
WEIGHT PER SQ.
FINISH
PRICE
Plus®
26
26
12"
12"
50,000
50,000
103#
103#
Galvalume
*
Signature® 200 *
ü
ü†
24
24
24
24
12"
12"
12"
12"
50,000
50,000
50,000
50,000
132#
132#
132#
132#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
ü
ü
ü
Please Inquire
22
22
22
22
12"
12"
12"
12"
50,000
50,000
50,000
50,000
176#
176#
176#
176#
Galvalume Plus® *
Signature® 200 *
Signature® 300 *
Please Inquire
Please Inquire
Please Inquire
Please Inquire
.024 Alum
12"
50,000
41#
ü
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
Delivery:
1. 26 gauge - Signature® 200 White and Burnished Slate ...................................................................Approximately 5 working days
2. 24 gauge - stocked colors ....................................................................................................................Approximately 5 working days
Notes:
1. 26, 24 and 22 gauge panels - lengths longer than 4'-0" ............................................................................................. Please inquire
2. 26 gauge panels are to be used for soffit conditions only.
3. Perforated aluminum is 1/8" round on 0.324" staggered centers. Approximately 13 1/2% open area. Any other color, gauge
or perforation pattern. .Please inquire.
4. Not recommended for exterior wall applications.
20
PANELS
FlexLoc® Series
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
24
24
24
8 1/ 2"
8 1/ 2"
8 1/ 2"
8 1/ 2"
50,000
50,000
50,000
50,000
140#
140#
140#
140#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
24
24
24
24
9 1/ 2"
9 1/ 2"
9 1/ 2"
9 1/ 2"
50,000
50,000
50,000
50,000
130#
130#
130#
130#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
24
24
24
24
10 1/2"
10 1/2"
10 1/2"
10 1/2"
50,000
50,000
50,000
50,000
120#
120#
120#
120#
Galvalume Plus® ¤
Signature® 200 *
Signature® 300 *
ü
ü†
ü†
Please Inquire
ü
ü
ü
Please Inquire
ü
ü†
ü†
Please Inquire
Consult the MBCI FLEXLOC® TECHNICAL/PRODUCT MANUAL for proper product application, design details and other
product information.
Panel Pricing:
1.
2.
3.
4.
See page 31 for clip selection.
Packaging Cost:
1. Standard packaging: Plywood crate for all lengths with strippable film on panels.
2. Plywood crating: ................................................................................................................................Add:$15.50/. $200.00 minimum.
3. Special packaging ............................................................................................................................................................ Please Inquire
Delivery:
1. 24 gauge - stocked colors .................................................................................................................Approximately 10 Working Days
Notes:
1. All panel lengths longer than 20'-0" .............................................................................................................................. Please Inquire
2. Curved panel applications ...............................................................................................................................................Please Inquire
21
PANELS
QwikLok™
DESCRIPTION
PRICED PER SQUARE
GAUGE
COVERAGE
YIELD (PSI)
WEIGHT PER SQ.
FINISH
PRICE
24
12"
50,000
175#
High Gloss White Only
ü
Panel Pricing:
1.
2.
3.
4.
Packaging Cost:
1.
2.
3.
4.
5.
Block and band with strippable film on panels .................................................................$10.00/lf of bundle - $30.00 minimum.
Block and band and waterproof paper wrap with strippable film on panels ...................$2.00/lf of bundle - $30.00 minimum.
LTL Package - Plywood crating: ............................................................................................$15.50 per square - $200.00 minimum.
Special packaging ............................................................................................................................................................ Please Inquire
Delivery:
1. High Gloss White .................................................................................................................................Approximately 5 Working Days
Notes:
1. All panels - lengths longer than 40'-0" .......................................................................................................................... Please Inquire
2. Not recommended for wall application.
3. Heavier gauges and embossing may minimize oil canning.
22
ACCESSORIES
Hat Section (HS-1)
Note:
* Random colors are subject to availability
DESCRIPTION
PART #
HW-3100
HW-3102
HW-3103
HW-3104
HW-3105
HW-3105
PRICED PER EACH
GAUGE
FINISH
WEIGHT EACH
LENGTH
PRICE
22
24
24
26
16
16
Galvanized
Galvanized
Random Colors*
Random Colors*
Red Oxide
Galvanized
14.00#
11.00#
11.00#
8.00#
25.20#
25.80#
20'-0"
20'-0"
20'-0"
20'-0"
20'-0"
20'-0"
ü
ü
ü
ü
ü
ü
Channel Section (CS-1)
DESCRIPTION
PART #
HW-3110
PRICED PER EACH
GAUGE
FINISH
WEIGHT EACH
LENGTH
PRICE
18
Galvanized
15.70#
20'-0"
ü
1" Sub-Grit (SG-1)
DESCRIPTION
PART #
HW-3120
HW-3121
PRICED PER EACH
GAUGE
FINISH
WEIGHT EACH
LENGTH
PRICE
18
16
Galvanized
Red Oxide
22.00#
27.40#
20'-0"
20'-0"
ü
ü
23
1/
2"
ACCESSORIES
Sub-Grit (SG-2)
DESCRIPTION
PART #
PRICED PER EACH
GAUGE
FINISH
WEIGHT EACH
LENGTH
PRICE
18
16
Galvanized
Red Oxide
13.60#
16.40#
20'-0"
20'-0"
ü
ü
HW-3130
HW-3131
Furring Zee
DESCRIPTION
PART #
PRICED PER EACH
DIM "A"
GAUGE
FINISH
WEIGHT EACH
LENGTH
PRICE
1 1/ 8"
2 1/ 8"
3 1/ 8"
4 1/ 8"
3 1/ 8"
4 1/ 8"
22
22
18
18
16
16
Galvanized
Galvanized
Galvanized
Galvanized
Red Oxide
Red Oxide
3.33#
4.39#
8.66#
10.35#
10.54#
12.60#
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
ü
ü
ü
ü
ü
ü
HW-3020
HW-3021
HW-3022
HW-3023
HW-3024
HW-3025
Structural Pricing:
1. Custom lengths available - Minimum order required.
Notes:
1. Length tolerance is ± 1/4".
2. Alternate gauges and finishes available: Please inquire.
3. Refer to "Commercial/Industrial Pricing" Section for additional structural shapes.
24
ACCESSORIES
Flat Sheet and Coil Selection Chart
24 GAUGE
42 3/4"
22 GAUGE
48 3/8"
42 3/4"
48 3/8"
SIGNATURE® 300
Colonial Red
Natural Patina
Medium Bronze
Pacific Blue
Snow White
Slate Gray
Almond
Midnight Bronze
Classic Green
Everglade
Brownstone
Sea Mist
Tundra
Spruce
Scarlet Red
Harbor Blue
Hunter Green
River Teal
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
SIGNATURE® 300 METALLIC
Copper Metallic
Silver Metallic
Dove Metallic
Sandstone Metallic
l
l
l
l
SIGNATURE® 200
Burnished Slate
Polar White
Charcoal Gray
Light Stone
Hawaiian Blue
Rustic Red
Koko Brown
Fern Green
Coal Black
l
l
l
l
l
l
l
l
l
l
OTHER
Galvalume Plus®
High Gloss White
l
l
l
l
25
ACCESSORIES
Flat Sheets
Notes:
1. Add $42.00 for flat sheet wood skid/Maximum 100 flat sheets or
3000# per skid. Maximum 14'-0" length.
2. Add $60.00 for LTL crating/Maximum 100 flat sheets or 3000# per
skid. Maximum 14'-0" length.
3. Strippable film available for flat sheets (except for "Low Gloss Paint
Finish Systems") upon request. Add $0.10 per square foot.
4. Flat sheet lengths other than 10'-2" are available upon request.
Minimum length 5'-0", maximum length 14'-0". Flat sheet lengths over
14'-0" require special skid. Please inquire.
5. All material is Grade D.
* See Flat Sheet and Coil Selection Chart on ARP- __ for color
availability.
DESCRIPTION
PRICED PER EACH
GAUGE
WIDTH
FINISH
WEIGHT PER CLF
PRICE
24
24
24
24
24
24
24
22
22
22
22
22
22
42 3/4"
42 3/4"
42 3/4"
48 3/8"
48 3/8"
48 3/8"
48 3/8"
42 3/4"
42 3/4"
48 3/8"
48 3/8"
48 3/8"
48 3/8"
Signature® 200 *
Galvalume Plus® ¤
High Gloss White
Signature® 300 *
Signature® 200 *
Galvalume Plus® ¤
Signature® 200 *
Galvalume Plus® **
Signature® 300 *
Signature® 200 *
Galvalume Plus® ¤
3.32#
3.32#
3.32#
3.75#
3.75#
3.75#
3.75#
4.22#
4.22#
4.77#
4.77#
4.77#
4.77#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
26
ACCESSORIES
Coils
Notes:
1.
2.
3.
4.
5.
Add $108.00 SET-UP CHARGE FOR COIL. (Minimum 300 L.F.)
Add $42.00 per coil for wood skid.
All coils are subject to ± 15% of quantity ordered.
The camber tolerance for coils is one inch in any 20 feet.
Slitting available upon request - $0.10 per LF - $300.00 minimum
charge.
6. All material is Grade D or E for coils.
* See Flat Sheet and Coil Selection Chart on ARP- __ for color
availability.
DESCRIPTION
PRICED PER CLF COIL
GAUGE
WIDTH
FINISH
WEIGHT PER CLF
PRICE
24
24
24
24
24
24
24
22
22
22
22
22
22
42 3/4"
42 3/4"
42 3/4"
48 3/8"
48 3/8"
48 3/8"
48 3/8"
42 3/4"
42 3/4"
48 3/8"
48 3/8"
48 3/8"
48 3/8"
Signature® 200 *
Galvalume Plus® ¤
High Gloss White
Signature® 300 *
Signature® 200 *
Galvalume Plus® ¤
Signature® 200 *
Galvalume Plus® **
Signature® 300 *
Signature® 200 *
Galvalume Plus® ¤
3.32#
3.32#
3.32#
3.75#
3.75#
3.75#
3.75#
4.22#
4.22#
4.77#
4.77#
4.77#
4.77#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
27
ACCESSORIES
SB/HB Batten Cap
Note:
• Pricing is for 24 gauge material - Inquire about pricing for other gauges
or finishes
DESCRIPTION
PART #
FL-566
PRICED PER 100 LINEAR FEET
SIZE
LENGTH
GIRTH
WEIGHT PER
CLF
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1" x 3/8"
Specify
21/16"
16.79#
ü
ü
ü
ü
LB Batten Cap
Note:
or finishes
DESCRIPTION
PART #
FL-567
PRICED PER 100 LINEAR FEET
SIZE
LENGTH
GIRTH
WEIGHT PER
CLF
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
2" x 2"
Specify
6 1/ 4"
50.86#
ü
ü
ü
ü
SB/HB Batten Cap Coupler
Note:
or finishes
• Field cut to 4" pieces
DESCRIPTION
PART #
FL-560
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-0"
1 7/ 8"
1.67#
ü
ü
ü
ü
28
ACCESSORIES
LB Batten Cap Coupler
Note:
or finishes
• Field cut to 4" pieces
DESCRIPTION
PART #
FL-561
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-0"
5 7/ 8"
5.07#
ü
ü
ü
ü
HB Transition Filler
Note:
or finishes
• Field cut to 4" pieces - Two pieces required per transition
DESCRIPTION
PART #
FL-562
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-0"
4"
3.32#
ü
ü
ü
ü
LB Transition Filler
Note:
or finishes
• Field cut to 4" pieces - Four pieces required per transition
DESCRIPTION
PART #
FL-563
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-0"
1 3/ 4"
1.48#
ü
ü
ü
ü
LokSeam® Rib Cover
Note:
or finishes
• For LokSeam® profile at roof to fascia transitions
DESCRIPTION
PART #
FL-565
PRICED PER EACH
LENGTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
8"
.25#
ü
ü
ü
ü
29
ACCESSORIES
MasterLine 16 Outside Closure - Metal
• One closure per panel
DESCRIPTION
PRICED PER EACH
PART #
LENGTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
HW-4067LH
HW-4067RH
17"
17"
.25#
.25#
ü
ü
ü
ü
ü
ü
ü
ü
LokSeam® Standard Clip
DESCRIPTION
PART #
HW-6200
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvanized
8.75#
ü
LokSeam® UL90 Clip
Note:
• Requires two fasteners per clip for UL90
DESCRIPTION
PART #
HW-6400
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvanized
16.00#
ü
30
ACCESSORIES
FlexLoc® Clip
DESCRIPTION
PART #
HW-4900
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvalume Plus®
1.07#
ü
SB Clip
Note:
• Use with Craftsman™ Series Small Batten panels
DESCRIPTION
PART #
HW-4500
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvalume Plus®
4.40#
ü
LB Clip
Note:
• Use with Craftsman™ Series Large Batten panels
DESCRIPTION
PART #
HW-3700
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvalume Plus®
13.00#
ü
31
ACCESSORIES
HB Clip
Note:
• Use with Craftsman™ Series High Batten panels
DESCRIPTION
PART #
HW-4800
PRICED PER 100
FINISH
WEIGHT PER 100
PRICE
Galvalume Plus®
5.00#
ü
Bearing Plate
Note:
• For use with all clips
DESCRIPTION
PART #
HW-7500
PRICED PER 100
GAUGE
WEIGHT PER 100
RED OXIDE
GALVANIZED
16
32.18#
ü
ü
Classic® Series Clip Angle
Note:
• Use with Classic Series P12 or Classic Series P16 Panels
DESCRIPTION
PART #
HW-4600
PRICED PER 100
GAUGE
FINISH
WEIGHT PER 100
PRICE
16
Red Oxide
61.00#
ü
32
ACCESSORIES
ShadowRib™ Starter Angle
DESCRIPTION
PART #
PRICED PER EACH
GAUGE
LENGTH
FINISH
WEIGHT PER EACH
PRICE
18
10'-0"
Galvanized
6.44#
ü
HW-4650
ShadowRib™ Clip
Note:
• Use with ShadowRib™ Panels only
DESCRIPTION
PART #
HW-6602
PRICED PER EACH
GAUGE
FINISH
WEIGHT PER 100
PRICE
16
Red Oxide
.35#
ü
Support Plate
Note:
• Use with Floating or Fixed Hip
DESCRIPTION
PART #
P-140
PRICED PER EACH
GAUGE
LENGTH
FINISH
GIRTH
WEIGHT EACH
PRICE
14
10'-0"
Red Oxide
233/8"
54.35#
ü
Support Plate
Note:
• Use with Fixed Ridge
DESCRIPTION
PART #
P-141
PRICED PER EACH
GAUGE
LENGTH
FINISH
GIRTH
WEIGHT EACH
PRICE
14
10'-0"
Red Oxide
233/8"
54.35#
ü
33
ACCESSORIES
MasterLine Sheathing Support Angle
Note:
• Used to support exterior sheathing and base trim when no sheeting
notch is in concrete.
• 11/2" leg supports sheathing thickness of 1/2" - 1"
• 41/2" leg supports sheathing thickness of 31/2" - 4"
DESCRIPTION
PART #
PRICED PER EACH
GAUGE
LENGTH
FINISH
WEIGHT EACH
PRICE
18
10'-0"
Galvanized
10.13#
ü
HW-4651
MasterLine Sheathing Support Angle
Note:
• Used to support exterior sheathing and base trim when no sheeting
notch is in concrete.
• 2 1/2" leg supports sheathing thickness of 11/2" - 2"
• 3 1/2" leg supports sheathing thickness of 2 1/2" - 3"
DESCRIPTION
PART #
PRICED PER EACH
GAUGE
LENGTH
FINISH
WEIGHT EACH
PRICE
18
10'-0"
Galvanized
10.13#
ü
HW-4652
Rake Support Floating
Note:
• Use with LokSeam® Panels only
DESCRIPTION
PART #
HW-4680
PRICED PER EACH
GAUGE
LENGTH
FINISH
WEIGHT PER
EACH
RED OXIDE
GALVANIZED
14
20'-0"
Red Oxide
18.77#
ü
ü
34
ACCESSORIES
Back-Up Plate Vertical Leg
Note:
• Use with LokSeam® Panels only
DESCRIPTION
PART #
PRICED PER EACH
GAUGE
WIDTH
WEIGHT PER EACH
RED OXIDE
GALVANIZED
16
16
16
18"
16"
12"
2.27#
2.01#
1.49#
ü
ü
ü
N/A
ü
ü
HW-7762
HW-7766
HW-7764
Foam Tape
DESCRIPTION
PART #
WIDTH
HW-516
THICKNESS
2"
3/
8"
PRICED PER ROLL
LENGTH
WEIGHT PER ROLL
PRICE
25'-0"
1.44#
ü
Tape Sealer - Triple Bead
DESCRIPTION
PART #
HW-502
TYPE
Butyl
WIDTH
7/
8"
THICKNESS
3/
16"
PRICED PER CARTON
LENGTH
CARTON QTY
CARTON
WEIGHT
PRICE
20'-0"
6
23.00#
ü
Tape Sealer - Tri-Bead
DESCRIPTION
PART #
HW-504
TYPE
Butyl
WIDTH
7/
8"
THICKNESS
3/
16"
PRICED PER CARTON
LENGTH
CARTON QTY
CARTON
WEIGHT
PRICE
25'-0"
8
20.00#
ü
35
ACCESSORIES
Tube Sealant
Note:
• 25' per tube at 1/4" bead.
DESCRIPTION
PART #
HW-548
HW-550
HW-540
HW-541
HW-542
HW-544
HW-549
PRICED PER TUBE
TYPE
COLOR
TUBE SIZE
TUBE WEIGHT
PRICE
Acrylic
Acrylic
Urethane
Urethane
Urethane
Urethane
Non-Skinning Butyl
White
Gray
White
Gray
Bronze
Almond
White
11 Ounce
11 Ounce
11 Ounce
11 Ounce
11 Ounce
11 Ounce
10 Ounce
.75#
.75#
.85#
.85#
.85#
.85#
1.00#
ü
ü
ü
ü
ü
ü
ü
Metal Vent Material
Note:
• Use with FL-540 Ridge Flashing for Metal Vent
DESCRIPTION
PART #
HW-525
PRICED PER EACH
TYPE
WIDTH
GAUGE
LENGTH
WEIGHT PER EACH
PRICE
Metal
4 1/ 2"
24
8'-0"
4.25#
ü
Reflective Insulation
Notes:
• PSR-VR with VersiTab is 1/4" fiberglass with a white polypropylene scrim
reinforced vapor retarder on one side and a foil film on the other side.
• RFSK with VersiTab 1/4" fiberglass with a silver (aluminum) scrim
reinforced vapor retarder on one side and a foil film on the other side.
• VersiTab has a 2" tab on one side and a 4" tab on the other side of the
roll to allow the insulation side laps to be folded and stapled or
overlapped and taped.
DESCRIPTION
PART #
HW-3744
HW-3745
HW-3748
HW-3749
PRICED PER ROLL
TYPE
WIDTH
LENGTH
WEIGHT PER ROLL
PRICE
PSK-VR w/Versitab
RFSK w/Versitab
PSK-VR w/Versitab
RFSK w/Versitab
4'-0"
4'-0"
6'-0"
6'-0"
125'-0"
125'-0"
125'-0"
125'-0"
31.00#
31.00#
46.00#
46.00#
ü
ü
ü
ü
36
ACCESSORIES
Scrimless Aluminum Tape
DESCRIPTION
PART #
HW-514
PRICED PER ROLL
WIDTH
LENGTH
WEIGHT PER ROLL
PRICE
3"
150'-0"
1.50#
ü
Craftsman™ Series Closures - Inside
DESCRIPTION
PART #
HW-404
PRICED PER EACH
PROFILE
WEIGHT PER EACH
PRICE
LB12 or LB16.5
.10#
ü
Classic® Series Closures - Outside
DESCRIPTION
PART #
HW-406
HW-408
PRICED PER EACH
PROFILE
WEIGHT PER EACH
PRICE
P12
P16
.36#
.46#
ü
ü
MasterLine 16 Closures - Outside
DESCRIPTION
PART #
HW-433
PRICED PER EACH
PROFILE
WEIGHT EACH
PRICE
MasterLine
.04#
ü
ShadowRib™ Closures - Inside
DESCRIPTION
PART #
HW-410
PRICED PER EACH
PROFILE
WEIGHT PER EACH
PRICE
ShadowRib
.44#
ü
37
ACCESSORIES
ShadowRib™ Closures - Outside
DESCRIPTION
PART #
HW-412
PRICED PER EACH
PROFILE
WEIGHT PER EACH
PRICE
ShadowRib
.10#
ü
Miscellaneous Closures
DESCRIPTION
PART #
HW-414
HW-416
HW-418
HW-420
HW-422
PRICED PER EACH
SIZE
WEIGHT PER EACH
PRICE
8" x 1" x 48"
2" x 1" x 48"
17/8" x 1" x 48"
1" x 1" x 48"
11/2" x 1" x 48"
.13#
.16#
.15#
.40#
.13#
ü
ü
ü
ü
ü
1 5/
NuWall® Closures - Outside
Note:
• Two closures required per panel
DESCRIPTION
PART #
HW-424
PRICED PER EACH
PROFILE
WEIGHT PER CARTON
PRICE
NuWall®
.10#
ü
Designer™ Series 16" Fluted Closure - Inside
DESCRIPTION
PART #
HW-4059
PRICED PER EACH
PROFILE
WEIGHT PER CARTON
PRICE
Designer Series 16" Fluted
.20#
ü
Designer™ Series 16" Fluted Closure - Outside
DESCRIPTION
PART #
HW-4037
PRICED PER EACH
PROFILE
WEIGHT PER CARTON
PRICE
Designer Series 16" Fluted
.20#
ü
38
ACCESSORIES
Designer™ Series 12" Flat Closure - Inside
DESCRIPTION
PART #
HW-4058
PRICED PER EACH
PROFILE
WEIGHT PER CARTON
PRICE
Designer Series 12" Flat
.15#
ü
Panel Hemming Tool
DESCRIPTION
PART #
HW-602
PRICED PER EACH
WIDTH
WEIGHT PER EACH
PRICE
19"
4.25#
ü
Touch Up Paint
DESCRIPTION
PART #
HW-304
HW-305
PRICED PER EACH
FINISH
SIZE
COLOR
WEIGHT PER EACH
PRICE
Signature® 200
Signature® 300
2 Ounce
2 Ounce
See Color Chart
See Color Chart
.50#
.50#
ü
ü
39
TRIM
Closure Angle
Inside
Outside
DESCRIPTION
PART #
T-5005
T-5006
PRICED PER EACH
LENGTH
GIRTH
TYPE
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
10'-2"
3"
3"
Inside
Outside
2.45#
2.45#
ü
ü
ü
ü
ü
ü
ü
ü
Z Closure
DESCRIPTION
PART #
T-5011
T-5012
T-5014
T-5015
T-5016
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1"
1 1/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
10'-2"
3"
3 1/ 8"
3 3/ 4"
4"
4 1/ 8"
2.45#
2.55#
3.06#
3.27#
3.37#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
40
TRIM
Z Closure With Cleat
DESCRIPTION
PART #
T-5021
T-5022
T-5023
T-5024
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
3 5/ 8"
4 1/ 4"
4 1/ 2"
4 5/ 8"
2.96#
3.47#
3.68#
3.77#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
C Closure
DESCRIPTION
PART #
T-5031
T-5032
T-5033
T-5034
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
5 1/ 8"
5 3/ 4"
6"
6 1/ 8"
4.19#
4.71#
4.91#
5.01#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
C Closure With Cleat
DESCRIPTION
PART #
T-5041
T-5042
T-5043
T-5044
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
7 1/ 8"
7 3/ 4"
8"
8 1/ 8"
5.84#
6.35#
6.55#
6.66#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
41
TRIM
Angle Trim
DESCRIPTION
PART #
T-5051
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
2 1/ 4"
1.84#
ü
ü
ü
ü
DESCRIPTION
PART #
T-5053
T-5055
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1"
1 1/ 2"
10'-2"
10'-2"
2 1/ 2"
3"
2.05#
2.46#
ü
ü
ü
ü
ü
ü
ü
ü
Cap Trim
DESCRIPTION
PART #
T-5061
T-5065
T-5062
T-5063
T-5064
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
1 5/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
10'-2"
5 5/ 8"
6 1/ 8"
6 1/ 4"
6 1/ 2"
6 5/ 8"
4.60#
5.00#
5.11#
5.32#
5.42#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
42
TRIM
Ridge/Hip Flash - Fixed
Note:
• Specify roof slope or angle indicated on drawing
• Specify use for ridge or hip
DESCRIPTION
PART #
T-5071
T-5072
T-5073
T-5074
T-5075
T-5076
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
4 1/ 2"
4 1/ 2"
5 1/ 2"
5 1/ 2"
6 1/ 2"
6 1/ 2"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
10"
10"
12"
12"
14"
14"
8.19#
16.38#
9.85#
19.65#
11.45#
22.90#
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Ridge Flash - Floating
Note:
• For LokSeam® only
• For use without Ridge Vent Material - 18" peak purlin spacing
DESCRIPTION
PART #
T-5087
T-5088
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
161/2"
161/2"
13.49#
26.98#
ü
ü
ü
ü
ü
ü
ü
ü
Ridge Flash For Vent
Note:
• For LokSeam® or Craftsman® Series
• Use with FL-254 Perforated Vent Drip - 18" purlin spacing
DESCRIPTION
PART #
T-5089
T-5090
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
211/2"
211/2"
17.79#
31.95#
ü
ü
ü
ü
ü
ü
ü
ü
43
TRIM
Ridge Flash For Metal Vent
Note:
• Use with HW-525 Metal Vent Material - 18" peak purlin spacing
DESCRIPTION
PART #
FL-540
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
221/4"
14.67#
ü
ü
ü
ü
Ridge End Cap - Floating
Note:
• Use with T-5087 or T-5088 Ridge Flash - Floating
• Specify roof slope
DESCRIPTION
PART #
PRICED PER EACH
WEIGHT PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
.26#
ü
ü
ü
ü
T-5100
Ridge End Cap - Vent
Note:
• Use with T-5089 or T-5090 Ridge Flash for Vent
• Specify roof slope
DESCRIPTION
PART #
T-5101
PRICED PER EACH
WEIGHT PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
.71#
ü
ü
ü
ü
44
TRIM
Peak Cap
Note:
• Specify open hem when using with T-5121 Continuous Cleat
DESCRIPTION
PRICED PER EACH
PART #
DIM "A"
DIM "B"
LENGTH
GIRTH
WEIGHT
PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
T-5077
T-5078
T-5079
T-5080
T-5081
T-5082
T-5083
T-5084
T-5085
T-5086
4 1/ 2"
4 1/ 2"
5 1/ 2"
5 1/ 2"
4 1/ 2"
4 1/ 2"
5 1/ 2"
5 1/ 2"
101/2"
101/2"
5"
5"
5"
5"
4"
4"
4"
4"
5"
5"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
111/8"
111/8"
121/8"
121/8"
101/8"
101/8"
111/8"
111/8"
167/8"
167/8"
9.08#
18.16#
10.05#
20.10#
8.26#
16.52#
9.08#
18.16#
12.95#
25.91#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Valley Trim
Note:
DESCRIPTION
PART #
DIM "A"
PRICED PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
DIM "B"
LENGTH
GIRTH
WEIGHT
PER EACH
11"
11"
11"
11"
10'-2"
20'-2"
10'-2"
20'-2"
24"
24"
26"
26"
21.30#
39.32#
19.66#
42.51#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
23"
23"
22"
22"
10'-2"
14'-0"
10'-2"
14'-0"
48"
48"
48"
48"
42.60#
54.69#
39.71#
54.69#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Standard Valley
T-5091
T-5092
T-5093
T-5094
1"
1"
2"
2"
Extended Valley
T-5095
T-5096
T-5097
T-5098
1"
1"
2"
2"
45
TRIM
Panel Starter
Note:
• Use with vertical applications (Fascia) only
• 24 gauge material only
DESCRIPTION
PART #
T-5111
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
3"
2.45#
ü
ü
ü
ü
Continuous Cleat
DESCRIPTION
PART #
T-5121
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER EACH
ASSORTED COLORS
10'-2"
3"
2.45#
ü
Offset Cleat
DESCRIPTION
PART #
T-5131
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER EACH
ASSORTED COLORS
10'-2"
3 1/ 2"
2.89#
ü
Perforated Vent Drip
Note:
• 24 gauge material - Galvalume® Plus only
• Use with T-5089 or T-5090 Ridge Flash for Vent
DESCRIPTION
PART #
FL-254
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER EACH
GALVALUME PLUS®
10'-2"
6 3/ 4"
5.58#
ü
46
TRIM
Eave Trim
Note:
DESCRIPTION
PART #
T-5141
T-5142
T-5143
T-5144
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
4"
4"
3"
3"
10'-2"
20'-2"
10'-2"
20'-2"
8 5/ 8"
8 5/ 8"
7 5/ 8"
7 5/ 8"
7.04#
14.08#
6.14#
12.28#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Eave with Extended Drip Edge
Note:
• Use with roof slopes up to 4:12
DESCRIPTION
PART #
T-5151
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
9 5/ 8"
7.81#
ü
ü
ü
ü
Note:
• Use with roof slopes over 4:12
DESCRIPTION
PART #
T-5152A
T-5152B
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
10'-2"
5"
5 3/ 8"
4.22#
4.30#
ü
ü
ü
ü
ü
ü
ü
ü
47
TRIM
Eave to Fascia Transition
Note:
DESCRIPTION
PART #
T-5161
T-5162
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
11"
11"
9.00#
18.00#
ü
ü
ü
ü
ü
ü
ü
ü
Roof to Fascia/Sill Sash
Note:
DESCRIPTION
PART #
T-5171
T-5172
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9"
9"
7.37#
14.74#
ü
ü
ü
ü
ü
ü
ü
ü
Sill/Head Sash
Note:
• Specify angle indicated on drawing
DESCRIPTION
PART #
T-5181
T-5182
T-5183
T-5184
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 4"
1 1/ 4"
2 1/ 4"
2 1/ 4"
10'-2"
20'-2"
10'-2"
20'-2"
7"
7"
9"
9"
5.73#
11.46#
7.37#
14.74#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
48
TRIM
Sill with Soffit
Note:
DESCRIPTION
PRICED PER EACH
PART #
DIM "A"
DIM "B"
LENGTH
GIRTH
WEIGHT
PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
T-5191
T-5193
1 1/ 4"
2 1/ 4"
3 3/ 4"
4 3/ 4"
10'-2"
10'-2"
9"
11"
7.45#
9.10#
ü
ü
ü
ü
ü
ü
ü
ü
Box Sill with Soffit
Note:
DESCRIPTION
PRICED PER EACH
PART #
DIM "A"
DIM "B"
LENGTH
GIRTH
WEIGHT
PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
T-5201
T-5202
T-5203
T-5204
1 1/ 4"
1 1/ 4"
2 1/ 4"
2 1/ 4"
3 3/ 4"
3 3/ 4"
4 3/ 4"
4 3/ 4"
10'-2"
20'-2"
10'-2"
20'-2"
11"
11"
13"
13"
9.01#
18.02#
10.64#
21.29#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Parapet High Side Eave Flash - Fixed
Note:
DESCRIPTION
PART #
T-5211
T-5212
T-5213
T-5214
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
4 1/ 2"
4 1/ 2"
5 1/ 2"
5 1/ 2"
10'-2"
20'-2"
10'-2"
20'-2"
9"
9"
10"
10"
7.40#
14.80#
8.27#
16.40#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
49
TRIM
Parapet High Side Eave Flash - Floating
Note:
DESCRIPTION
PART #
T-5215
T-5216
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
13"
13"
10.76#
21.29#
ü
ü
ü
ü
ü
ü
ü
ü
Parapet Rake Flash
DESCRIPTION
PART #
T-5217
T-5218
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9 1/ 4"
9 1/ 4"
7.60#
15.05#
ü
ü
ü
ü
ü
ü
ü
ü
Parapet Rake Cleat
DESCRIPTION
PART #
T-5219
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
2 1/ 2"
2.04#
ü
ü
ü
ü
50
TRIM
Counterflash
DESCRIPTION
PART #
T-5225
T-5226
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
4 1/ 2"
4 1/ 2"
3.72#
7.39#
ü
ü
ü
ü
ü
ü
ü
ü
Alternate Counterflash
DESCRIPTION
PART #
T-5221
T-5222
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
4 1/ 2"
4 1/ 2"
3.48#
6.96#
ü
ü
ü
ü
ü
ü
ü
ü
Box Rake
Note:
Specify open hem when using with T-5121 Continuous Cleat
DESCRIPTION
PRICED PER EACH
PART #
DIM "A"
DIM "B"
LENGTH
GIRTH
WEIGHT
PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
T-5231
T-5232
T-5233
T-5234
T-5235
T-5236
T-5237
T-5238
4"
4"
5"
5"
5"
5"
5"
5"
3"
3"
3"
3"
4"
4"
5"
5"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
10'-2"
20'-2"
8 5/ 8"
8 5/ 8"
9 5/ 8"
9 5/ 8"
105/8"
105/8"
115/8"
115/8"
7.04#
14.08#
7.85#
15.70#
8.67#
17.34#
9.62#
18.97#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
51
TRIM
Rake Slide
DESCRIPTION
PART #
T-5240
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
2 3/ 4"
2.24#
ü
ü
ü
ü
Inside Corner
DESCRIPTION
PART #
T-5251
T-5252
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
8"
8"
6.62#
13.10#
ü
ü
ü
ü
ü
ü
ü
ü
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
ü
ü
ü
ü
ü
ü
ü
ü
Outside Corner
DESCRIPTION
PART #
T-5241
T-5242
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
10'-2"
20'-2"
8"
8"
6.55#
13.10#
52
TRIM
Box Gutter
Note:
• Snow Gutter available - Please inquire
DESCRIPTION
PART #
T-5261
T-5262
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
24"
24"
19.70#
39.40#
ü
ü
ü
ü
ü
ü
ü
ü
Box Gutter with Drip Edge
Note:
• 4:12 maximum roof slope
DESCRIPTION
PART #
T-5271
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
27"
22.03#
ü
ü
ü
ü
Gutter Strap
DESCRIPTION
PART #
T-5281
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10"
2"
.14#
ü
ü
ü
ü
53
TRIM
Gutter Ends - Left or Right
Notes:
• Use with T-5261 or T-5262 Box Gutter or T-5271 Box Gutter with Drip
Edge
• Specify left or right.
DESCRIPTION
PART #
PRICED PER EACH
WEIGHT PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
.31#
ü
ü
ü
ü
T-5291
Downspout
DESCRIPTION
PART #
T-5311
T-5312
T-5313
T-5315
T-5314
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
12'-0"
14'-0"
16'-0"
20'-2"
163/4"
163/4"
163/4"
163/4"
163/4"
13.72#
16.46#
19.21#
19.21#
27.45#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Downspout with 45° Kickout
DESCRIPTION
PART #
T-5321
T-5322
T-5323
T-5325
T-5324
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
12'-0"
14'-0"
16'-0"
20'-2"
163/4"
163/4"
163/4"
163/4"
163/4"
13.86#
16.46#
19.21#
21.95#
27.45#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
54
TRIM
Downspout Strap
DESCRIPTION
PART #
T-5301
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1"
10"
.08#
ü
ü
ü
ü
Coping
Note:
DESCRIPTION
PART #
T-5331
T-5332
T-5333
T-5334
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10"
10"
14"
14"
10'-2"
20'-2"
10'-2"
20'-2"
181/8"
181/8"
221/8"
221/8"
15.00#
29.75#
18.31#
36.04#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Hem-Lock Coping
Note:
DESCRIPTION
PART #
T-5341
T-5342
T-5343
T-5344
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10"
10"
14"
14"
10'-2"
20'-2"
10'-2"
20'-2"
191/4"
191/4"
231/4"
231/4"
15.93#
31.59#
19.24#
37.98#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
55
TRIM
Gravel Guard
Note:
Specify open hem when using with T-5121 Continuous Cleat
DESCRIPTION
PART #
T-5351
T-5352
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
111/8"
111/8"
9.83#
19.66#
ü
ü
ü
ü
ü
ü
ü
ü
Splice Trim
DESCRIPTION
PART #
T-5361
T-5365
T-5362
T-5363
T-5364
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
1 5/ 8"
1 3/ 4"
2"
2 1/ 8"
10'-2"
10'-2"
10'-2"
10'-2"
10'-2"
8 3/ 8"
8 7/ 8"
9"
9 1/ 4"
9 3/ 8"
6.93#
7.34#
7.45#
7.65#
7.76#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Alternate Splice Trim
DESCRIPTION
PART #
T-5371
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
10'-2"
3 1/ 2"
2.86#
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
ü
ü
ü
ü
56
TRIM
Termination Trim
DESCRIPTION
PART #
T-5391
T-5392
T-5393
T-5394
T-5395
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1"
1 1/ 2"
1 5/ 8"
2 1/ 2"
3"
10'-2"
10'-2"
10'-2"
10'-2"
10'-2"
7 1/ 4"
7 3/ 4"
7 7/ 8"
8 3/ 4"
9 1/ 4"
6.00#
6.41#
6.52#
7.24#
7.56#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
MasterLine 16 Head Trim
DESCRIPTION
PART #
T-5511
T-5513
T-5515
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3'-6"
10'-4"
14'-4"
6 1/ 8"
6 1/ 8"
6 1/ 8"
1.74#
5.15#
7.14#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
MasterLine 16 Jamb/Sill Case
DESCRIPTION
PART #
T-5517
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6"
4.96#
ü
ü
ü
ü
57
TRIM
MasterLine 16 Door Jamb Cleat
Note:
• Use with T-5541, T-5542, T-5543, T-5544 or T-5545 Two Piece Jamb Trim
DESCRIPTION
PART #
T-5540
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
3"
2.48#
ü
ü
ü
ü
MasterLine 16 Two Piece Jamb Trim
Note:
• Use with T-5540 Door Jamb Cleat
DESCRIPTION
PART #
DIM "A"
T-5541
T-5542
T-5543
T-5544
T-5545
1 1/ 2"
1 3/ 4"
2"
2 1/ 2"
3"
SHEATHING
THICKNESS
1/
3/
2"
4"
1"
1 1/ 2"
2"
PRICED PER EACH
LENGTH
GIRTH
WEIGHT
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
10'-2"
10'-2"
10'-2"
10'-2"
4 3/ 8"
5"
5 1/ 4"
5 3/ 4"
6 1/ 4"
4.14#
3.93#
4.34#
4.76#
5.17#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
MasterLine 16 Base Trim
DESCRIPTION
PART #
T-5534
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
1 1/ 8"
10'-2"
4 3/ 4"
3.93#
ü
ü
ü
ü
58
TRIM
MasterLine 16 Panel Cleat
DESCRIPTION
PART #
T-5530
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
31/16"
2.53#
ü
ü
ü
ü
MasterLine 16 Outside Corner
DESCRIPTION
PART #
T-5505
T-5506
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7"
7"
5.79#
11.49#
ü
ü
ü
ü
ü
ü
ü
ü
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
ü
ü
ü
ü
ü
ü
MasterLine 16 Inside Corner
DESCRIPTION
PART #
T-5507
T-5508
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
10'-2"
20'-2"
7"
7"
5.79#
11.49#
ü
ü
59
TRIM
MasterLine 16 Support Zee
DESCRIPTION
PART #
T-5526
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
2 3/ 4"
2.28#
ü
ü
ü
ü
MasterLine 16 Cee Closure
DESCRIPTION
PART #
T-5510
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
5 1/ 2"
4.55#
ü
ü
ü
ü
MasterLine 16 Flat Splice Trim
DESCRIPTION
PART #
T-5520
T-5521
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
14'-0"
5"
5"
4.14#
5.70#
ü
ü
ü
ü
ü
ü
ü
ü
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
ü
ü
ü
ü
ü
ü
MasterLine 16 Reveal Splice Trim
DESCRIPTION
PART #
T-5523
T-5524
PRICED PER EACH
LENGTH
GIRTH
WEIGHT EACH
GALVALUME
PLUS®
10'-2"
14'-0"
7 1/ 2"
7 1/ 2"
6.41#
8.83#
ü
ü
60
TRIM
ShadowRib™ Base Trim
DESCRIPTION
PART #
T-6011
T-6012
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 1/ 4"
7 1/ 4"
6.13#
12.25#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Head Trim
DESCRIPTION
PART #
T-6083
T-6084
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 7/ 8"
7 7/ 8"
6.43#
12.85#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Head Trim - Alternate
DESCRIPTION
PART #
T-6081
T-6082
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
113/4"
113/4"
9.59#
19.18#
ü
ü
ü
ü
ü
ü
ü
ü
61
TRIM
ShadowRib™ Splice Trim
DESCRIPTION
PART #
T-6121
T-6122
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
8"
8"
6.62#
13.08#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Outside Corner
DESCRIPTION
PART #
T-6023
T-6024
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9"
9"
7.34#
14.69#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Inside Corner
DESCRIPTION
PART #
T-6053
T-6054
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9"
9"
7.34#
14.69#
ü
ü
ü
ü
ü
ü
ü
ü
62
TRIM
ShadowRib™ Rake Trim
Note:
• Use with "PBR" Panel roofs
DESCRIPTION
PART #
T-6111
T-6112
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
22"
22"
19.00#
38.00#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Rake Trim
Note:
• Use with Ultra-Dek®, Double-Lok®, BattenLok® and SuperLok® roofs
DESCRIPTION
PART #
T-6101
T-6102
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
21"
21"
17.15#
34.30#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Zee Cap
DESCRIPTION
PART #
T-6133
T-6134
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
5 3/ 8"
5 3/ 8"
4.45#
8.77#
ü
ü
ü
ü
ü
ü
ü
ü
63
TRIM
ShadowRib™ Furring Zee
DESCRIPTION
PART #
T-6131
T-6132
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
10'-2"
3 1/ 4"
4 3/ 4"
3.68#
4.90#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Panel Cap
DESCRIPTION
PART #
T-6061
T-6062
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 1/ 8"
7 1/ 8"
5.82#
11.64#
ü
ü
ü
ü
ü
ü
ü
ü
ShadowRib™ Cap/Jamb Trim
DESCRIPTION
PART #
T-6071
T-6072
T-6073
T-6074
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 8"
3 1/ 8"
1 1/ 2"
1 1/ 2"
10'-2"
20'-2"
10'-2"
20'-2"
8 1/ 8"
8 1/ 8"
6 1/ 2"
6 1/ 2"
6.72#
13.26#
5.38#
8.54#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
64
TRIM
NuWall® New Construction Base Trim
DESCRIPTION
PART #
T-6210
T-6212
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
6 7/ 8"
6 7/ 8"
5.69#
11.28#
ü
ü
ü
ü
ü
ü
ü
ü
NuWall® Retrofit Base Trim
DESCRIPTION
PART #
T-6214
T-6216
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 1/ 4"
7 1/ 4"
5.72#
11.44#
ü
ü
ü
ü
ü
ü
ü
ü
NuWall® Wall Cap
• Use with PBR Panel Walls only
DESCRIPTION
PART #
T-6218
T-6220
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 1/ 8"
7 1/ 8"
5.82#
11.64#
ü
ü
ü
ü
ü
ü
ü
ü
65
TRIM
NuWall® New Construction Head/Jamb Trim
DESCRIPTION
PART #
T-6222
T-6224
T-6226
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-6"
14'-6"
16'-6"
7 1/ 8"
7 1/ 8"
7 1/ 8"
6.09#
8.41#
9.57#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
NuWall® Retrofit Head/Jamb Trim
DESCRIPTION
PART #
T-6228
T-6230
T-6232
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-6"
14'-6"
16'-6"
5 1/ 8"
5 1/ 8"
5 1/ 8"
4.19#
5.87#
8.38#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
NuWall® New Construction Head Trim
DESCRIPTION
PART #
T-6234
T-6236
T-6238
T-6240
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3'-6"
10'-6"
14'-6"
16'-4"
8 1/ 8"
8 1/ 8"
8 1/ 8"
8 1/ 8"
2.33#
6.94#
9.30#
13.28#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
66
TRIM
NuWall® Spacer Angle
DESCRIPTION
PART #
T-6242
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER EACH
GALVALUME PLUS®
10'-2"
2 1/ 4"
1.84#
ü
NuWall® Downspout with 45° Offset
• Use with PBR Panel Walls only
DESCRIPTION
PART #
T-6250
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
8"
163/4"
1.40#
ü
ü
ü
ü
NuWall® Spacer Zee
DESCRIPTION
PART #
T-6246
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
2 1/ 2"
2.04#
ü
ü
ü
ü
67
TRIM
Designer™ Series Head/Jamb Cleat
Note:
• Use with T-6303 Two Piece Jamb Trim or T-6305 Two Piece Head Trim
DESCRIPTION
PART #
T-6301
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6 1/ 4"
5.17#
ü
ü
ü
ü
Designer™ Series Two Piece Jamb Trim
Note:
• Use with T-6301 Head/Jamb Cleat
DESCRIPTION
PART #
T-6303
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6"
4.96#
ü
ü
ü
ü
Designer™ Series Two Piece Head Trim
Note:
• Use with T-6301 Head/Jamb Cleat
DESCRIPTION
PART #
T-6305
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6 3/ 8"
5.27#
ü
ü
ü
ü
68
TRIM
Designer™ Series Base Trim
DESCRIPTION
PART #
T-6307
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6 3/ 8"
5.27#
ü
ü
ü
ü
Designer™ Series Support Zee
DESCRIPTION
PART #
T-6309
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER EACH
GALVALUME PLUS®
10'-2"
3 3/ 8"
2.79#
ü
69
TRIM
FlexLoc® Panel Splice Trim
Note:
• Two week lead time required
DESCRIPTION
PRICED PER EACH
PART #
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
HW-1200
10'-2"
105/8"
8.79#
ü
ü
ü
ü
FlexLoc® Rake Termination Trim
Note:
• Two week lead time required
DESCRIPTION
PRICED PER EACH
PART #
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
HW-1202
10'-2"
65/16"
5.38#
ü
ü
ü
ü
FlexLoc® Factory Curved Rake Trim
Note:
•
•
•
•
Pricing is based on radius - Please inquire for pricing
Specify radius
24 gauge material only
Two week lead time required
DESCRIPTION
PART #
HW-1204
PRICED PER EACH
LENGTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
6.25#
Please Inquire
Please Inquire
Please Inquire
Please Inquire
FlexLoc® Panel Starter Trim
Note:
•
•
•
•
Not for use on curved roofs
For curved applications, please inquire
24 gauge material only
Two week lead time required
DESCRIPTION
PRICED PER EACH
PART #
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
HW-1206
10'-2"
45/16"
3.57#
ü
ü
ü
ü
70
TRIM
FW-120 Panel Extended Eave Trim
Note:
DESCRIPTION
PART #
T-5401
T-5402
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
121/8"
121/8"
10.03#
19.90#
ü
ü
ü
ü
ü
ü
ü
ü
FW-120 Panel Sill Trim
Note:
DESCRIPTION
PART #
T-5405
T-5406
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9 1/ 4"
9 1/ 4"
7.65#
15.18#
ü
ü
ü
ü
ü
ü
ü
ü
FW-120 Panel Wall Splice Trim
DESCRIPTION
PART #
T-5411
T-5412
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 3/ 4"
7 3/ 4"
6.41#
12.72#
ü
ü
ü
ü
ü
ü
ü
ü
71
TRIM
FW-120 Panel Base Trim without Sheeting Notch
DESCRIPTION
PART #
T-5415
T-5416
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
9 3/ 8"
9 3/ 8"
7.76#
15.39#
ü
ü
ü
ü
ü
ü
ü
ü
FW-120 Panel Masonry Inside Corner
DESCRIPTION
PART #
T-5421
T-5422
PRICED PER EACH
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
10'-2"
20'-2"
7 5/ 8"
7 5/ 8"
6.31#
12.51#
ü
ü
ü
ü
ü
ü
ü
ü
72
TRIM
Canopy Rake
DESCRIPTION
PART #
T-7011
T-7012
T-7013
T-7014
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 2"
3 1/ 2"
4"
4"
10'-2"
20'-2"
10'-2"
20'-2"
153/4"
153/4"
161/4"
161/4"
12.87#
25.74#
13.27#
26.54#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Canopy Concealed Rake
DESCRIPTION
PART #
T-7021
T-7022
T-7023
T-7024
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 2"
3 1/ 2"
4"
4"
10'-2"
20'-2"
10'-2"
20'-2"
151/2"
151/2"
16"
16"
12.66#
25.32#
13.06#
26.12#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Canopy Gutter
DESCRIPTION
PART #
T-7031
T-7032
T-7033
T-7034
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 2"
3 1/ 2"
4"
4"
10'-2"
20'-2"
10'-2"
20'-2"
183/4"
183/4"
191/4"
191/4"
15.34#
30.68#
15.72#
31.44#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
73
TRIM
Canopy Concealed Gutter
DESCRIPTION
PART #
T-7041
T-7042
T-7043
T-7044
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 2"
3 1/ 2"
4"
4"
10'-2"
20'-2"
10'-2"
20'-2"
181/2"
181/2"
19"
19"
15.11#
30.22#
15.51#
31.02#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Canopy Valley Gutter
DESCRIPTION
PART #
T-7051
T-7052
T-7053
T-7054
PRICED PER EACH
DIM "A"
LENGTH
GIRTH
WEIGHT PER
EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3 1/ 2"
3 1/ 2"
4"
4"
10'-2"
20'-2"
10'-2"
20'-2"
181/2"
181/2"
191/2"
191/2"
15.11#
30.22#
15.93#
31.86#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Canopy Gutter Ends - Left/Right
Note:
• Specify left or right
• Specify Gutter part number
DESCRIPTION
PART #
T-7061A
T-7061B
T-7061C
PRICED PER EACH
WEIGHT PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
.50#
.50#
.50#
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
74
TRIM
Canopy Corner Box - Left/Right
Note:
• Specify left or right
• Specify Rake and Gutter part numbers
DESCRIPTION
PART #
T-7071
PRICED PER EACH
WEIGHT PER EACH
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
3.50#
ü
ü
ü
ü
75
TRIM
Trim Pricing:
1.
2.
3.
4.
5.
All trim is 24 gauge material.
Add $8.00 per square for embossing
When ordering standard trim in custom lengths, use price per linear foot for standard trim plus a 10% surcharge.
Strippable film available for trim upon request. Add $.10 per square foot.
Packaging Cost:
1.
2.
3.
4.
5.
6.
7.
8.
Trim with girth greater than 15" ..........................................................................................................................20 pieces per carton
Trim with girth less than 15" ................................................................................................................................50 pieces per carton
Downspouts ...........................................................................................................................................................12 pieces per carton
Standard Packaging: Cardboard with metal bands ...........................................................................................$3.44 per linear foot
LTL Packaging: Cardboard with wood blocks and metal bands ......................................................................$4.63 per linear foot
Plywood crating .....................................................................................................................................................$9.50 per linear foot
Minimum packaging charge .....................................................................................................................................$36.00 per carton
Special packaging .............................................................................................................................................................Please Inquire
Delivery:
1. 24 gauge colors (see back of Architectural Color Chart) ..............................................................Approximately 10 Working Days
2. Other gauges, colors and metals ...................................................................................................................................Please Inquire
Price Your Own Special Trim:
1.
2.
3.
4.
5.
6.
7.
8.
Calculate the number of square feet of material (girth x length).
Multiply number of square feet by the appropriate square foot price (see chart below).
Add $1.60 for eachbreak and $3.20 for each hem.
Add appropriate packaging costs.
Specify which side of trim has color or finished coat.
Send sketch of the special flashing to MBCI with order.
If more than one special trim is required, number them SF1, SF2, SF3, etc.
All trim is 24 gauge unless otherwise indicated.
DESCRIPTION
PRICED PER EACH
GAUGE
WEIGHT / SQ FT
GALVALUME
PLUS®
SIGNATURE®
200
SIGNATURE®
300
SIGNATURE®
300 METALLIC
24
22
1.04#
1.31#
ü
ü
ü
ü
ü
ü
ü
ü
76
www.MBCI.com
Contact Us:
Houston, TX: 877.713.6224
Adel, GA: 888.446.6224
Atlanta, GA: 877.512.6224
Atwater, CA: 800.829.9324
Dallas, TX: 800.653.6224
Indianapolis, IN: 800.735.6224
Lubbock, TN: 800.758.6224
Memphis, TN: 800.206.6224
Oklahoma City, OK: 800.597.6224
Omaha, NE: 800.458.6224
Copyright © 2015 MBCI. All rights reserved.
Phoenix, AZ: 888.533.6224
Richmond, VA: 800.729.6224
Rome, NY: 800.559.6224
Salt Lake City, UT: 800.874.2404
San Antonio, TX: 800.598.6224

Architectural Product Catalog

Transcription

Similar documents

designed by redvil.com Project: CKX TRÖJA Date

join us - Signature HomeStyles

Host Company Tour Application

Big Sandy ISD

Assumere Viagra Scaduto » Discount Prescription Drugs

Spooktacular Style! - Signature HomeStyles

signature

record copy request form - National Society of the Sons of the

St. Bede`s College, Shimla

APPLICffiIO}{. .FOR GREDIT