Product Catalog

Transcription

Product Catalog - DENTSPLY Implants

Product Catalog
Decades of Evidence
An original becomes a classic if
the product maintains a perfect
interplay of form and function
for many years. FRIALIT® is one
of these classics: unique design,
reliable handling for decades.
As the first root-analog dental
implant FRIALIT® established
the treatment concept of immediate implant placement more
than 30 years ago. The consistent,
continuing development of
FRIALIT® in combination with the
comprehensive FRIADENT® range
of prosthetics can still meet all
demands. You are always at the
state of the art with this original.
PLANNING
CONTENT
PLANNING
FRIALIT® Planning Components
4
FRIALIT® Implant Package
6
FRIALIT Implants 7
FRIALIT Surgical Sets
8
®
®
FRIALIT® Surgical Unit and Contra-angle Handpieces
12
FRIALIT® Surgical Instruments 13
Prosthetics
FRIALIT® Prosthetic Components
SURGERY
Surgery
18
FRIALIT® Prosthetic Components “Esthetic”
Fabrication of suprastructure on implant level
20
FRIALIT Prosthetic Components “Multi-Purpose”
Fabrication of suprastructure on gingiva level
32
FRIALIT Prosthetic Instruments 38
presentation Material
42
Materials
43
Information regarding the materials involved in implants, system
components and instruments is given in the form of a reference number
after every article: FRIADENT® Gingiva Former2. Page 43 of this catalog
presents an overview of the materials and the composition of the
materials used.
The pictures in this catalog are for illustration. The size of the illustrated
products may deviate from the original product.
DENTSPLY Implants reserves the right to make any technical changes
without prior notice.
presentation MATERIAL
®
PROsTHETICS
®
Planning Components
FRIADENT® Select
order no.
Article
45 – 5020
FRIALIT® Select Basic Set Complete
Per implant diameter: One straight
FRIADENT® Select Try-in Abutment and
the D 3.4 and D 3.8/A 15 angled Select
Try-in Abutment, one FRIADENT® Select
Sleeve and the pin, one FRIALIT® Select
Try-in Implant, Implant Forceps and one
Select Tray
Try-in Abutments
FRIADENT® Select Try-in Abutment2
n Determination of oro-vestibular
and mesio-distal implant position and
of the distance to the adjacent teeth
n Determination of gingival height,
angulation and position of the
horizontal screw (GH 2) for all FRIADENT®
abutments
order no.
Article
45 – 2190
FRIADENT® Basic Set Select
Try-in Abutment
One FRIADENT® Select Try-in Abutment A 0,
straight per implant diameter and
one FRIADENT® Select Try-in
Abutment D 3.4 and D 3.8/A 15, angled
45 – 2120
45 – 2121
45 – 2122
45 – 2123
D
D
D
D
3.4 / A
3.8 / A
4.5 / A
5.5 / A
0 (straight)
0 (straight)
0 (straight)
0 (straight)
45 – 2220
45 – 2221
D 3.4 / A 15 (angled 15°)
D 3.8 / A 15 (angled 15°)
FRIADENT® Select Multipack
Try-in Abutment (3 pieces)
45 – 2193
45 – 2194
45 – 2195
45 – 2196
D
D
D
D
45 – 2293
45 – 2294
D 3.4 / A 15 (angled 15°, 3 pieces)
D 3.8 / A 15 (angled 15°, 3 pieces)
3.4 / A 0 (straight, 3 pieces)
Sleeves
FRIADENT® Select Sleeves
Exact transfer of the pre-prosthetic
planning to the clinical situation
order no.
Article
45 – 5090
FRIADENT® Select Basic Set Sleeve
One FRIADENT® Select Sleeve per
implant diameter and one sleeve
n
FRIADENT® Select Sleeve2
without pin
45 – 5035
45 – 5045
45 – 5055
45 – 5065
45 – 5075
4
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
PLANNING
Sleeves
order no.
Article
FRIADENT® Multipack Select Sleeve2
(3 pieces), without pin
45 – 5095
45 – 5091
45 – 5092
45 – 5093
45 – 5094
D 3.4 (3 pieces)
D 3.8 (3 pieces)
D 4.5 (3 pieces)
D 5.5 (3 pieces)
D 6.5 (3 pieces)
Try-in Implants
order no.
Article
91 – 4502
FRIADENT® Khoury Drill Guide Pin2
45 – 5080
FRIALIT® Select Basic Set Try-in Implant
One FRIALIT® Select Try-in Implant per
implant diameter
FRIALIT® Select Try-in Implant2
FRIALIT® Select Try-in Implants
Intra-operative check of implant
position, implant axis, congruency
between implant and bone crest
and peri-implant soft tissue level
n
45 – 5030
45 – 5040
45 – 5050
45 – 5060
45 – 5070
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
FRIALIT® Multipack Select Try-in Implant
(3 pieces)
45 – 5085
45 – 5081
45 – 5082
45 – 5083
45 – 5084
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
others
order no.
Article
48 – 0040
FRIALIT® Select Tray (empty)
FRIADENT® Depth Gauge2
45 – 5104
45 – 5100
D 2.0
D 3.0
49 – 1211
FRIADENT® Radiographic Balls for
pre-surgical planning6
Ø 5 mm, 12 pieces
45 – 5570
FRIALIT® Radiographic Template
(Scales 1:1; 1,3:1; 1,7:1)
5
Implant Package
FRIALIT® implants are supplied in a
double-sterile blister package with an
outer carton. The type of package
offers the maximum product safety in
conformance with the increasingly rigid
requirements for medical devices. The
packaging also makes it easy to store
all products for quick retrieval and they
are easy to handle during the surgical
procedure.
All other DENTSPLY Implants products for
surgery and prosthetics are also sealed in
blisters in branded cardboard packages.
Outer box package
Simple product classification with brandspecific design, sight window and color-coded
imprint of the implant diameter
n Large seal label with details of products
n Stackable, all important product information
remains visible
n Includes multilingual instructions for use
n
Transparent outer blister
Outer sterile barrier of implant package
n
Transparent inner blister
Inner sterile package
n Contains implant shuttle with implant and
cover screw for implants
n Peel-off label with batch code for reliable
documentation of treatment
n
Plastic implant shuttle
Holds the implant securely in the packaging
and protects it from damage during transport
and removal
n Makes non-contact transfer and acceptance
of the implant easy during the operation
n Three wings with roughened surfaces for
non-slip holding make it very easy to handle
safely
n
6
Implants
FRIALIT ® Implants
Article
FRIALIT® plus Stepped Screw (sterile)
Content: Stepped Screw, Placement
Head2 and Cover Screw2
36 – 2431
36 – 2433
36 – 2435
D 3.4 / L 113
D 3.4 / L 133
D 3.4 / L 153
36 – 2441
36 – 2443
36 – 2445
D 3.8 / L 112
D 3.8 / L 132
D 3.8 / L 152
36 – 2450
36 – 2451
36 – 2453
36 – 2455
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
L
L
L
L
82
102
132
152
36 – 2460
36 – 2461
36 – 2463
36 – 2465
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
L
L
L
L
82
102
132
152
36 – 2471
36 – 2473
36 – 2475
D 6.5 / L 102
D 6.5 / L 132
D 6.5 / L 152
Indications
Single-tooth replacement
n Fixing bridges and prostheses
n
Healing mode
Submerged or transgingival with
gingiva-forming components or
temporary dentures
n
INSTRuMENTS
Loosening of Placement Head (after
placing the implants in the cavity):
FRIADENT® Hex-Driver 0.9 mm (page 17)
Insertion of implants
FRIALIT® Stepped Screw Implant Driver
(page 16)
Placement of Implant Cover Screw
FRIADENT® Hex-Driver 0.9 mm or
FRIADENT® Slot Screwdriver 2.0 mm
(page 17)
FRIADENT® Implant Cover Screw2
45 – 1130
45 – 1140
45 – 1150
45 – 1160
45 – 1170
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
7
SuRGERy
order no.
Surgical Sets
FRIALIT® Drill Sequence
A successful implant placement requires precise and
careful implant site preparation. Therefore, please follow
our recommendations for drilling exactly.
FRIALIT®
Stepped
Screw D 3.4
FRIALIT®
Stepped
Screw D 3.8
FRIALIT®
Stepped
Screw D 4.5
FRIALIT®
Stepped
Screw D 5.5
FRIALIT®
Stepped
Screw D 6.5
8
FRIALIT®
Twist Drill
D 2.0
FRIALIT®
Round Drill
FRIALIT®
Stepped Drill
D 3.4
For type I
bone
Cortical Drill
D 3.8
FRIALIT®
Stepped Drill
D 3.8
Cortical Drill
D 4.5
FRIALIT®
Stepped Drill
D 4.5
FRIALIT®
Stepped Drill
D 5.5
Cortical Drill
D 5.5
FRIALIT®
Stepped Drill
D 6.5
Cortical Drill
D 6.5
a maximum speed of 400 to 500 rpm.
During the preparation make sure drills
are adequately internally and externally
irrigated.
FRIALIT® Cortical Drill
Dense cortical bone (type I bone)
frequently exhibits elastic forces
after implant site preparation.
Additional preparation of the top
step with the FRIALIT® Cortical Drill
can compensate for this effect.
The FRIALIT® Cortical Drill gently
expands the implant site as required
by increasing the diameter of the
first step by 1/10 mm and thus allows
for an easy and atraumatic implant
insertion avoiding a too high insertion
torque.
option: FRIALIT® BoneCondenser
In cases of poor bone quality, FRIALIT®
BoneCondensers can be used for lateral
and apical implant site condensation.
SuRGERy
FRIALIT® Twist Drills and Stepped Drills
FRIALIT® Twist Drills and Stepped Drills
are used at 800 rpm. In very dense
cortical bone the diameter 5.5 mm and
6.5 mm stepped drills are used at
This improvement of bone quality
andquantity enhances primary implant
stabilization.
9
Surgical Sets
FRIALIT® Sets Surgical Instruments
The instrument sets contain all
instruments required for implant
placement.
The kits are supplied in the
FRIALIT® Surgical Tray.
order no.
Article
45 – 8072
FRIALIT® BasicSet Surgery
45 – 8090
FRIALIT® ExpertSet Surgery
order no.
Article
48 – 0005
FRIALIT® Surgical Tray (empty)
For detailed information on the
content of the surgical sets please
see page 11.
10
ExpertSet
n
n
FRIALIT® Select Try-in Implant
StarterSet n
FRIALIT® Select Try-in Implant
D 3.4 n
Radiographic Balls for
pre-surgical planning (5 pieces)
FRIADENT® Select Try-in Abutment
StarterSet n
D 3.4 n
D 3.4/A 15 BasicSet
ExpertSet
Handpiece Stepped Screw
Implant Driver D 3.4
n
Handpiece Stepped Screw
Implant Driver D 3.8 – D 6.5
n
Ratchet Stepped Screw
Implant Driver
12 mm
16 mm
20 mm
n
n
n
n
n
n
FRIADENT® Ratchet
n
n
FRIADENT® Ratchet Insert
for Implant Driver
n
n
Handpiece Hex Driver, 0.9 mm
n
n
Ratchet Hex Driver, 0.9 mm
n
n
Handpiece Slot Screwdriver n
n
Contents
n
Fitting Tool for Depth Stops
n
n
Depth Gauge D 2
n
n
Twist Drill D 2 (with 4 Depth Stops)
Stepped Drill D 3.4 (with 5 Depth Stops)
n
n
n
n
Ratchet Slot Screwdriver Round Drill n
n
Implant Forceps n
n
Stepped Drill
D 3.8 universal (with 4 Depth Stops) Surgical Tray
n
n
n
n
Stepped Drill
Stepped Drill
Stepped Drill
Stepped Drill
D 4.5 / L 8 D 4.5 / L 10 D 4.5 / L 13
D 4.5 / L 15 Stepped Drill
Stepped Drill
Stepped Drill
Stepped Drill
D 5.5 / L 8 D 5.5 / L 10 D 5.5 / L 13
D 5.5 / L 15 Stepped Drill D 6.5 / L 10 Stepped Drill D 6.5 / L 13
Stepped Drill D 6.5 / L 15 n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Drill Extension n
Long Internal Irrigation Tube
n
n
n
Cortical Drill
Cortical Drill
Cortical Drill
Cortical Drill
D 3.8
D 4.5
D 5.5
D 6.5
Drill Cleaning Instrument
SURGERY
BasicSet
Contents
11
Surgical Unit and Contra-angle Handpieces
FRIoS® Surgical Set
FRIoS® unit S/i
n Simple operating concept specially
designed for implant surgery
n Powerful, quiet running surgical motor
n User-oriented program sequence with
thread-tapping function actuated by
pushbutton
order no.
Article
90 – 6600
FRIoS® unit S/i V 220 – 240 AC
Scope of delivery: FRIOS® Unit S/i with handmotor (cable length 1.8 m), tray for motor,
stand, foot control, mains cable, hose set,
hose rings (5 pieces), locking pin for motor
FRIoS® Hand and Contra-angle Pieces
FRIoS® Contra-angle Handpieces
n Patented hexagonal clamping system
for trouble-free surgical procedures and
less wear on instruments
n Demountable version with head that
rotates 90° for access to difficult regions,
also meets the most rigid hygiene
requirements
n LED version with neutral white LED
light and higher luminous intensity
and larger field of illumination than
conventional halogen lamps
Note for users of FRIOS® Unit S:
A comprehensive overview of accessories
available for the FRIOS® Unit S/i, together
with all FRIOS® hand- and contra-angle
pieces, as well as the products of our
FRIOS® product range for augmentation,
are given in our product catalog FRIOS®,
order no. 6-302017.
12
order no.
Article
90 – 6720
90 – 6710
90 – 6810
FRIoS® Contra-angle Handpiece WS-75 20:1,
demountable
FRIoS® Contra-angle Handpiece WI-75 20:1
FRIoS® Contra-angle Handpiece WI-75 LED G
90 – 5030
90 – 5050
90 – 6850
FRIoS® Handpiece straight 1:1
FRIoS® Handpiece angled 1:1
FRIoS® Handpiece SI-11 LED G 1:1
Surgical Instruments
FRIALIT® Drills
Article
45 – 5102
FRIALIT® Twist Drill D 26
(with 4 Depth Stops)
45 – 5130
FRIALIT® Round Drill6
FRIALIT® Stepped Drill6
45 – 5331
D 3.4 universal (with 5 Depth Stops)
45 – 5340
D 3.8 universal (with 4 Depth Stops)
45 – 5350
45 – 5351
45 – 5353
45 – 5355
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
L
L
L
L
8
10
13
15
45 – 5360
45 – 5361
45 – 5363
45 – 5365
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
L
L
L
L
8
10
13
15
45 – 5371
45 – 5373
45 – 5375
D 6.5 / L 10
D 6.5 / L 13
D 6.5 / L 15
45 – 5101
FRIALIT® Drills
n For implant site preparation up
to the planned implant diameter
n With internal irrigation
n Adaptation of the universal FRIALIT®
Twist Drill D 2 and of the universal
Stepped Drills D 3.4 and 3.8 to the
planned implant length with depth
stops (included)
Cutting instruments should generally be
replaced after 20 cycles of use. Blunt or
damaged instruments must be replaced
immediately.
FRIALIT® Drill Depth Stop Tool6
(two-piece)
45 – 5349
45 – 5359
45 – 5369
45 – 5379
FRIALIT® Cortical Drill6
D 3.8
D 4.5
D 5.5
D 6.5
45 – 5280
FRIADENT® Drill Cleaning Instrument6
91 – 0003
FRIADENT® Drill Extension6
90 – 5042
FRIoS® Contra-angle Handpiece 20:1
Irrigation Tube
90 – 5043
Long Internal Irrigation Tube
(for Drill Extension)
45 – 5106
FRIADENT® Paralleling Pin2
FRIALIT® Cortical Drill
For preparation of the upper step of the
implant site in very dense cortical bone
n
The drill extension must always
be used with the long internal
irrigation tube.
Continuing procedure:
The instruments for insertion and
restoration of the implants are shown
on pages 16/17.
13
SuRGERy
order no.
FRIALIT® BoneCondenser
order no.
n For lateral and apical bone condensing
in reduced bone quality
n For improving bone quality and
quantity with increased primary stability
of implants
n Universal length with depth marks at
the working tips
The design of the FRIALIT® BoneCondensers is similar to that of the stepped
screw implants. The concave working
tip can be used for application of bone
regeneration material.
Article
FRIALIT® Instrument Set BoneCondenser,
straight with tray
45 – 8550
Instruments Set for diameter
D 3.8 – D 4.5
(surgical tray with 6 instruments)
45 – 8560
D 3.8 – D 5.5
45 – 8570
D 3.8 – D 6.5
FRIALIT® Instrument Set BoneCondenser,
angled with tray
45 – 8950
D 3.8 – D 4.5
45 – 8960
D 3.8 – D 5.5
45 – 8970
D 3.8 – D 6.5
FRIALIT® BoneCondenser, straight25/6
14
45 – 5402
45 – 5403
45 – 5440
D 2.0
D 3.0
D 3.8
45 – 5451
45 – 5453
45 – 5455
D 4.5 / L 10
D 4.5 / L 13
D 4.5 / L 15
45 – 5461
45 – 5463
45 – 5465
D 5.5 / L 10
D 5.5 / L 13
D 5.5 / L 15
45 – 5471
45 – 5473
45 – 5475
D 6.5 / L 10
D 6.5 / L 13
D 6.5 / L 15
Article
FRIALIT® BoneCondenser, angled25/6
45 – 5902
45 – 5903
45 – 5940
D 2.0
D 3.0
D 3.8
45 – 5951
45 – 5953
45 – 5955
D 4.5 / L 10
D 4.5 / L 13
D 4.5 / L 15
45 – 5961
45 – 5963
45 – 5965
D 5.5 / L 10
D 5.5 / L 13
D 5.5 / L 15
45 – 5971
45 – 5973
45 – 5975
D 6.5 / L 10
D 6.5 / L 13
D 6.5 / L 15
48 – 0060
FRIALIT® BoneCondenser, angled
n When limited space is available and for
the posterior region
SuRGERy
order no.
FRIALIT® BoneCondenser Tray5/6/26
(empty)
15
Periotome
FRIADENT® Periotome
n Designed for atraumatic residual root
and tooth removal
order no.
Article
45 – 5500
FRIADENT® Periotome Handle6
FRIADENT® Periotome Blade6
45 – 5501
45 – 5502
45 – 5503
P 1 (straight, wide)
P 2 (straight, narrow)
P 3 (angled, narrow)
Instruments for implant placement
order no.
Article
45 – 5709
FRIADENT® Ratchet6, without inserts6
45 – 5711
FRIADENT® Ratchet Insert for
Implant Driver6
FRIALIT® Ratchet Stepped Screw
Implant Driver6
46 – 5512
46 – 5516
46 – 5520
12 mm
16 mm
20 mm
FRIALIT® Handpiece Stepped Screw
Implant Driver4
45 – 5519
45 – 5510
16
for D 3.4
for D 3.8 – D 6.5
Drivers
order no.
Article
45 – 5651
FRIADENT® Handpiece Hex Driver6
Width 0.9 mm
45 – 5640
FRIADENT® Handpiece Slot Screwdriver6
Blade width 2.0 mm
FRIADENT® Ratchet Hex Driver6
with torque limit
Width 0.9 mm / 14 Ncm/short
Width 0.9 mm / 14 Ncm/long
Width 1.22 mm / 24 Ncm/short
Width 1.22 mm / 24 Ncm/long
SuRGERy
45 – 5732
45 – 5733
45 – 5734
45 – 5736
FRIADENT® Ratchet Slot Screwdriver6
with torque limit
45 – 5714
45 – 5722
Blade width 2.0 mm / 14 Ncm/short
Blade width 2.0 mm / 14 Ncm/long
45 – 5650
FRIADENT® Hex Driver6
without torque limit
Width 0.9 mm
order no.
Article
91 – 4510
FRIADENT®
Implant Mallet6/20
91 – 4515
FRIADENT® Implant Forceps2 (titanium)
The 0.9 mm FRIADENT® Hex Driver
without torque limit is recommended
for regions with limited access.
others
FRIADENT® Trephine Drill6
45 – 5654
45 – 5655
45 – 5656
45 – 5657
45 – 5658
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
17
Prosthetic Components
The type of prosthetic restoration is selected according to
the indication after the implants have healed or when they
are uncovered.
A wide range of prefabricated components is available in
the FRIADENT® prosthetics range – in the implant diameters,
various gingival heights, straight and angled.
There are two basic procedures:
n The “Esthetic” procedure with fabrication of the suprastructure
at implant level
The “Multi-Purpose” procedure with fabrication of the
suprastructure using the MP Abutment at gingiva level
n
“Esthetic” procedure
For reconstructions in which the esthetic aspect is in the
foreground
n
For cemented-in and screw-retained single-tooth
restorations and bridges and overdentures fixed to attachments
n
For fabrication of porcelain restorations
(not available for all implant diameters)
n
For difficult initial prosthetic situations that require customized
solutions
n
The impression is made at implant level, the laboratory selects the
prosthetic abutment.
Please note: FRIALIT® implants D 6.5 (green) are restored with
prosthetic components D 5.5 (red).
Healing
Soft tissue management
Impressions
Prosthetic restoration
SINGLE-TooTH RESToRATIoN
FRIADENT® EstheticBase
Page 26
SuBMERGED
FRIADENT®
Implant Cover Screw
Page 7
FRIADENT®
Gingiva Former
Page 20
FRIADENT® CERCoN®
Page 28
Temporary with
FRIADENT® EsthetiCap
Page 21
FRIADENT® CeraBase
Page 28
FRIADENT® AuroBase
Page 29
FRIADENT®
Transfer Coping
Page 23
FRIADENT® Telescopic
Abutment
Page 29
BRIDGES
Page 26
FRIADENT® AuroBase
Page 29
TRANSGINGIVAL
oVERDENTuRES
FRIADENT®
Gingiva Former
Page 20
FRIADENT® Attachment
Page 30
Temporary with
Page 21
FRIADENT® AuroBase
Page 29
FRIADENT® Telescopic
Abutment
Page 29
LoCAToR
FRIALIT® Locator Abutment
Page 31
18
“Multi-Purpose” (MP) procedure
For cases in which a simple and standardized procedure has
priority and the function of the restoration is the primary concern
The impression is made at gingiva level above the prosthetic
abutment. The abutment then remains in the patient's mouth.
For screw-retained bridge constructions and removable
implant-borne prostheses
Please note: Cemented-in restorations cannot be fabricated using
the Multi-Purpose procedure because of the restricted abutment
height.
n
n
The dentist selects and positions the prosthetic abutment at chairside before taking the impression.
Healing
Soft tissue management
Impressions
SuBMERGED
BRIDGES
FRIADENT® MP
Abutment
Page 32
Bridges on FRIADENT®
Castable/Cast-to Waxing Sleeve
Page 34
MP Cover
Screw
Page 32
MP Impression Coping
Page 33
TRANSGINGIVAL
MP Cover
Screw
Page 32
FRIADENT®PassivFit
Seite 34
oVERDENTuRES
Bar constructions on
FRIADENT® Bar Coping
Page 36
PRoSTHETICS
FRIADENT®
Implant Cover Screw
Page 7
FRIADENT® MP
Abutment
Page 32
Prosthetic restoration
19
Prosthetic Components “Esthetic”
FABRICATION OF THE SUPRASTRUCTURE ON IMPLANT LEVEL
Soft Tissue Management,
Temporary Restorations
Gingiva Formers
order no.
FRIADENT® Gingiva Former
For simple contouring of the
peri-implant soft tissue
n Selection according to implant
diameter (D) and gingival height (GH)
Article
FRIADENT® Gingiva Former2
n
1 mm
GH 1
2 mm
3 mm
5 mm
GH 2
GH 3
GH 5
INSTRuMENTS
Placement of the Gingiva Former:
FRIADENT® Hex Driver 0.9 mm or
(page 40)
FRIADENT® Gingiva Former Slim
For perfect contouring of the soft tissue
with limited mesio-distal space
n The Transfer Coping Slim is used to
make impressions (page 23)
45 – 1431
45 – 1432
45 – 1433
45 – 1435
D
D
D
D
3.4
3.4
3.4
3.4
/
/
/
/
GH
GH
GH
GH
1
2
3
5
45 – 1441
45 – 1442
45 – 1443
45 – 1445
D
D
D
D
3.8
3.8
3.8
3.8
/
/
/
/
GH
GH
GH
GH
1
2
3
5
45 – 1451
45 – 1452
45 – 1453
45 – 1455
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
GH
GH
GH
GH
1
2
3
5
45 – 1461
45 – 1462
45 – 1463
45 – 1465
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
GH
GH
GH
GH
1
2
3
5
FRIADENT® Gingiva Former2 slim
n
20
45 – 1232
45 – 1233
45 – 1235
D 3.4 / GH 2
D 3.4 / GH 3
D 3.4 / GH 5
45 – 1242
45 – 1243
45 – 1245
D 3.8 / GH 2
D 3.8 / GH 3
D 3.8 / GH 5
45 – 1252
45 – 1253
45 – 1255
D 4.5 / GH 2
D 4.5 / GH 3
D 4.5 / GH 5
Gingiva Formers
order no.
Article
FRIADENT® Gingiva Former2 Loop
45 – 1333
45 – 1335
D 3.4 / GH 3
D 3.4 / GH 5
45 – 1343
45 – 1345
D 3.8 / GH 3
D 3.8 / GH 5
45 – 1353
45 – 1355
D 4.5 / GH 3
D 4.5 / GH 5
45 – 1363
45 – 1365
D 5.5 / GH 3
D 5.5 / GH 5
FRIADENT® Gingiva Former Loop
n For easy securing of suture material,
thus enabling simple and safe soft
tissue surgery
Temporary Restorations
Article
FRIADENT® EsthetiCap24/32
with Screw for EsthetiCap
46 – 1730
D 3.4 / oval
46 – 1740
46 – 1745
D 3.8 / oval
D 3.8 / triangular
46 – 1750
46 – 1755
D 4.5 / oval
D 4.5 / triangular
46 – 1760
46 – 1765
D 5.5 / oval
D 5.5 / triangular
For esthetically demanding temporary
crowns and bridges
n Two anatomical cross-sections oval
and triangular
n Customizable by grinding or laminating
n Cementable
n X-ray-opaque with zirconium dioxide
additives
n
PRoSTHETICS
order no.
INSTRuMENTS
Placement of Screw for EsthetiCap:
(page 40)
21
Impressions
Impressions – Sets
order no.
FRIADENT® Transfer Coping
n For transferring the implant position
to the master model
n Available for PickUp (open tray) and
transfer technique
The Transfer Coping GH 3 is used for
gingiva up to 3 mm thick. Please use
the Transfer Coping GH 5 for gingiva
exceeding 3 mm thickness.
3 mm
5 mm
GH 3
GH 5
FRIADENT® Lab Set Pickup Impression
Content: Transfer Coping, PickUp
Guide Pin, FRIADENT® TransferCap
and Implant Analog
46 – 8233
46 – 8235
D 3.4 / GH 3
D 3.4 / GH 5
46 – 8243
46 – 8245
D 3.8 / GH 3
D 3.8 / GH 5
46 – 8253
46 – 8255
D 4.5 / GH 3
D 4.5 / GH 5
46 – 8263
46 – 8265
D 5.5 / GH 3
D 5.5 / GH 5
FRIADENT® Lab Set Transfer Impression
Content: Transfer Coping, Standard
Abutment Screw, FRIADENT®
TransferCap and Implant Analog
The head of the transfer copings is
flattened on three sides.
22
Article
46 – 8133
46 – 8135
D 3.4 / GH 3
D 3.4 / GH 5
46 – 8143
46 – 8145
D 3.8 / GH 3
D 3.8 / GH 5
46 – 8153
46 – 8155
D 4.5 / GH 3
D 4.5 / GH 5
46 – 8163
46 – 8165
D 5.5 / GH 3
D 5.5 / GH 5
Impressions – Single Components
order no.
Article
(Pickup Technique)
with PickUp Guide Pin and
FRIADENT® TransferCap
45 – 1635
45 – 1632
D 3.4 / GH 34
D 3.4 / GH 54
45 – 1645
45 – 1642
D 3.8 / GH 32
D 3.8 / GH 52
45 – 1655
45 – 1652
D 4.5 / GH 32
D 4.5 / GH 52
45 – 1665
45 – 1662
D 5.5 / GH 32
D 5.5 / GH 52
INSTRuMENTS
Placement of Pickup Guide Pin and
Standard Abutment Screws:
(page 40)
45 – 1630
45 – 1631
D 3.4 / GH 32
D 3.4 / GH 52
45 – 1640
45 – 1641
D 3.8 / GH 32
D 3.8 / GH 52
45 – 1650
45 – 1651
D 4.5 / GH 34
D 4.5 / GH 54
45 – 1660
45 – 1661
D 5.5 / GH 34
D 5.5 / GH 54
FRIADENT® Transfer Coping Slim2
(without screw)
45 – 1239
45 – 1249
45 – 1259
D 3.4
D 3.8
D 4.5
FRIADENT® Transfer Coping Slim
In cases with limited mesio-distal
space
n For impressions following soft-tissue
contouring with the Gingiva Former Slim
(page 20)
n Please order PickUp Guide Pin or
Standard Abutment Screw separately
(page 24)
n
23
PRoSTHETICS
(Transfer Technique)
with Standard Abutment Screw
and FRIADENT® TransferCap
Impressions
order no.
FRIADENT® Transfer Coping Basic
n For simple impression making in
cases with implant divergencies
n Please order PickUp Guide Pin
separately
FRIADENT® TransferCap
For utmost precision when making
impressions
n Included in delivery of Transfer Copings
PickUp and Transfer Technique
FRIADENT® Transfer Coping Basic2
(with screw)
46 – 1632
46 – 1642
46 – 1652
46 – 1662
D
D
D
D
3.4
3.8
4.5
5.5
45 – 1615
FRIADENT® Pickup Guide Pin4
D 3.4 – D 5.5
45 – 4305
FRIADENT® Standard Abutment Screw4
D 3.4 – D 5.5
FRIADENT® TransferCap20 Multi-Pack
(3 pieces)
n
24
Article
45 – 1639
45 – 1649
45 – 1659
45 – 1669
D
D
D
D
3.4
3.8
4.5
5.5
Prosthetics/Lab
Implant Analogs
order no.
Article
FRIADENT® Implant Analog5
45 – 4030
45 – 4040
45 – 4050
45 – 4060
45 – 4070
D
D
D
D
D
3.4
3.8
4.5
5.5
6.5
FRIADENT® Implant Analog
n For retaining the prosthetic
components on the master model
Try-in Abutments
order no.
Article
Determination of gingival height,
angulation and position of the horizontal
screw (GH 2) for all FRIADENT® abutments
n
45 – 2120
45 – 2121
45 – 2122
45 – 2123
D
D
D
D
3.4
3.8
4.5
5.5
/
/
/
/
A 0 (straight)
A 0 (straight)
A 0 (straight)
A 0 (straight)
45 – 2220
45 – 2221
D 3.4 / A 15 (angled 15°)
D 3.8 / A 15 (angled 15°)
Multi-Pack
(3 pieces)
D
D
D
D
3.4
3.8
4.5
5.5
/
/
/
/
A 0 (straight, 3 pieces)
45 – 2293
45 – 2294
D 3.4 / A 15 (angled, 3 pieces)
D 3.8 / A 15 (angled, 3 pieces)
PRoSTHETICS
45 – 2193
45 – 2194
45 – 2195
45 – 2196
25
Prosthetics/Lab: Single-tooth
Restorations and Bridges
EstheticBase Abutments
order no.
n For esthetically demanding
single-tooth crowns and bridges
n Available straight or angled
n Customizable by grinding
n Cementable or screw-retained
(horizontal or transversal)
GH 1
1 mm
GH 2
2 mm
GH 3
3 mm
FRIADENT® EstheticBase straight / A 0
with Screw for EstheticBase
GH 5
5 mm
Horizontal Screw Retention
All FRIADENT® EstheticBase Abutments
are provided with a horizontal thread
(M 1.4).
An additional horizontal or transverse
screw is necessary for horizontally
screw-retained crowns (page 27).
INSTRuMENTS
Placement of Screw for EstheticBase
and Standard Abutment Screw:
(page 40)
We recommend the use of special
titanium drills (Gebr. Brasseler, Lemgo
or Jota, Düsseldorf) for preparing the
abutments.
26
Article
46 – 2131
46 – 2132
46 – 2133
46 – 2135
D
D
D
D
3.4
3.4
3.4
3.4
/
/
/
/
GH
GH
GH
GH
14
24
34
54
46 – 2141
46 – 2142
46 – 2143
46 – 2145
D
D
D
D
3.8
3.8
3.8
3.8
/
/
/
/
GH
GH
GH
GH
12
22
32
52
46 – 2151
46 – 2152
46 – 2153
46 – 2155
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
46 – 2161
46 – 2162
46 – 2163
46 – 2165
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
FRIADENT® EstheticBase angled / A 15
with Screw for EstheticBase
46 – 2231
46 – 2232
46 – 2233
46 – 2235
D
D
D
D
3.4
3.4
3.4
3.4
/
/
/
/
GH
GH
GH
GH
14
24
34
54
46 – 2241
46 – 2242
46 – 2243
46 – 2245
D
D
D
D
3.8
3.8
3.8
3.8
/
/
/
/
GH
GH
GH
GH
12
22
32
52
46 – 2251
46 – 2252
46 – 2253
46 – 2255
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
46 – 2261
46 – 2262
46 – 2263
46 – 2265
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
Screws for EstheticBase
Article
46 – 4305
FRIADENT® Screw for EstheticBase4
D 3.4 – D 5.5
46 – 4403
FRIADENT® Horizontal Screw Set
Standard
Horizontal Screw Standard4
and Horizontal Screw Seat8
46 – 4404
FRIADENT® Horizontal Screw Set
long
Horizontal Screw Long4
46 – 4407
FRIADENT® Transverse Screw Set
Standard
Transverse Screw Standard4
46 – 4408
FRIADENT® Transverse Screw Set
long
Transverse Screw Long4
46 – 4401
FRIADENT® Horizontal Screw
Standard4
46 – 4402
FRIADENT® Horizontal Screw
long4
46 – 4405
FRIADENT® Transverse Screw
Standard4
46 – 4406
FRIADENT Transverse Screw
long4
45 – 4410
FRIADENT® Horizontal Screw Seat8
®
FRIADENT® Horizontal Screws
n Fixing the crown on the oral
abutment wall
FRIADENT® Transverse Screws
Fixing the crown on the oral and
also the facial abutment wall
n Double thread length for optimum
stability
n The horizontal screw is used as a
transverse screw with D 3.4 in this case
to use a sufficient number of threads
n
The use of horizontal retaining screws
with a long head is recommended particularly for molars, because the crown generally offers wider dimensional waxing.
INSTRuMENTS
PRoSTHETICS
order no.
Placement of Horizontal Screws:
FRIADENT Hex Driver 0.9 mm
(page 40)
27
Prosthetics/Lab: Single-tooth
Restorations and Bridges
Ceramic Abutments
order no.
Please note that the indication for
ceramic abutments is restricted to
the front-tooth region.
FRIADENT® CERCoN® Abutment
n For full-ceramic restorations with
best possible tooth analogy in the
anterior region
n Extremely stable with production
from zirconium dioxide ceramic
n Available straight or angled
n Customizable by grinding or casting
n Two shades of white, neutral
or dentinee
n Outstanding esthetics with brilliant
light dynamics
Article
FRIADENT® CERCoN® Abutment32
straight / A 0
with screw
47 – 1141
47 – 2141
D 3.8 / GH 1, neutral
D 3.8 / GH 1, dentine
47 – 1151
47 – 2151
47 – 1142
47 – 2142
47 – 1152
47 – 2152
FRIADENT® CERCoN® Abutment32
angled / A 15
with screw
INSTRuMENTS
Placement of screws:
FRIADENT® Hex Driver 1.22 mm (page 40)
We recommend using the ceramic-line
Shaping Set by DeguDent for prepping
the FRIADENT® CERCON® Abutments. The
grinding process of CERCoN® Abutments
requires irrigation.
FRIADENT® CeraBase
Two-piece abutment for high-quality
ceramic single-tooth restorations in the
anterior region
n Ceramic sleeve with titanium core
n Available in two sizes (conical and
anatomical)
47 – 1241
47 – 2241
47 – 1251
47 – 2251
47 – 1242
47 – 2242
47 – 1252
47 – 2252
FRIADENT® CeraBase Abutment
with Standard Abutment Screw4
n
INSTRuMENTS
Placement of Standard Abutment Screw:
(page 40)
Grinding of the ceramic sleeve of the
FRIADENT® CeraBase Abutment:
FRIADENT® CeraBase ToolSet (page 40)
The grinding process does not require
irrigation.
28
45 – 2530
45 – 2531
D 3.4 conical30/4
D 3.4 anatomical30/4
45 – 2540
45 – 2541
D 3.8 conical30/3
45 – 2550
45 – 2551
D 4.5 conical30/3
45 – 2560
45 – 2561
D 5.5 conical30/3
Cast-to Abutments
order no.
Article
FRIADENT® AuroBase20/8
45 – 2430
45 – 2440
45 – 2450
45 – 2460
D
D
D
D
3.4
3.8
4.5
5.5
FRIADENT® AuroBase
n For difficult prosthetic situations
requiring individual solutions for crowns,
bridges and prostheses
n For compensation of severe axial
divergencies
n For customized waxing from the top
edge of the implant with thin gingiva
Telescopic Abutments
Article
FRIADENT® Telescopic Abutment
45 – 2630
45 – 2640
45 – 2650
45 – 2660
45 – 4305
D
D
D
D
3.44
3.82
4.52
5.52
FRIADENT® Standard Abutment Screw4
D 3.4 – D 5.5
FRIADENT® Telescopic Abutment
For simple and economic fabrication
of telescopic crowns for fixing prostheses
and removable bridges
n For customized single-tooth crowns
n Compensation of axial divergencies
with customizable milling techniques
n
The Telescopic Abutment can be
veneered with titanium ceramics
(e.g., Duceratin, Ducera or Vita
Titankeramik, Vita Zahnfabrik) for
occlusally screw-retained
single crowns.
INSTRuMENTS
Placement of Standard Abutment Screws:
(page 40)
order no.
Article
FRIADENT® Milling Implant6
FRIADENT® Milling Implant
Fixing the prosthetic components
in the milling socket
n Implant analog made of special
steel with stronger retainers to resist
rotary forces generated by milling
n
45 – 2631
45 – 2641
45 – 2651
45 – 2661
D
D
D
D
3.4
3.8
4.5
5.5
29
PRoSTHETICS
order no.
Prosthetics/Lab: Overdentures
Ball and Socket Attachment
order no.
FRIADENT® Ball and Socket Attachment
n For fixing overdentures in
the mandible
n Simple protocol with option
of chairside restoration
n Axial divergencies can be
compensated
Article
FRIADENT® Ball and Socket Attachment
Insert2, Attachment Screw4,
Socket9, with blue silicone ring and
white plastic ring
45 – 3131
45 – 3132
45 – 3133
D 3.4 / GH 14
D 3.4 / GH 24
D 3.4 / GH 34
45 – 3141
45 – 3142
45 – 3143
45 – 3145
D
D
D
D
3.8
3.8
3.8
3.8
/
/
/
/
GH
GH
GH
GH
12
22
32
52
45 – 3151
45 – 3152
45 – 3153
45 – 3155
D
D
D
D
4.5
4.5
4.5
4.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
45 – 3161
45 – 3162
45 – 3163
45 – 3165
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
GH
GH
GH
GH
12
22
32
52
INSTRuMENTS
Placement of Insert:
FRIADENT® Seating Instrument for
Attachment Insert and MP Insert
(page 41)
Fixation of Attachment Screw:
Activating/Deactivating the Attachment
Matrix:
FRIADENT® Activator/Deactivator for Ball
and Socket Attachment (page 41)
FRIADENT® Attachment Patrix Analog
For repairing and relining overdentures
n Universal for all diameters
n
30
45 – 3200
FRIADENT® Attachment Matrix9
D 3.4 – D 5.5
45 – 4105
FRIADENT® Attachment Patrix
Analog5 universal
D 3.4 – D 5.5
LoCAToR ®
Article
26 – 3301
26 – 3302
26 – 3303
26 – 3304
26 – 3305
XiVE® LoCAToR® Abutment4
D 3.4 / GH 1
D 3.4 / GH 2
D 3.4 / GH 3
D 3.4 / GH 4
D 3.4 / GH 5
26 – 3311
26 – 3312
26 – 3313
26 – 3314
26 – 3315
D 3.8 / GH 1
D 3.8 / GH 2
D 3.8 / GH 3
D 3.8 / GH 4
D 3.8 / GH 5
26 – 3321
26 – 3322
26 – 3323
26 – 3324
26 – 3325
D 4.5 / GH 1
D 4.5 / GH 2
D 4.5 / GH 3
D 4.5 / GH 4
D 4.5 / GH 5
26 – 3331
26 – 3332
26 – 3333
26 – 3334
26 – 3335
D 5.5 / GH 1.3
D 5.5 / GH 2
D 5.5 / GH 3
D 5.5 / GH 4
D 5.5 / GH 5
45 – 3349
45 – 3350
45 – 3351
45 – 3360
45 – 3352
45 – 3353
45 – 3354
LoCAToR® Replacement Male41 (4 pieces)
clear, strong retention
pink, light retention
blue, extra light retention
gray, zero retention
extended range: green, strong retention
extended range: orange, light retention
extended range: red, extra light retention
45 – 3355
LoCAToR® Impression Coping42 (4 pieces)
45 – 3347
LoCAToR® Male Processing Package Titanium43
(2 pieces)
45 – 3348
LoCAToR® Male Processing Package44 Stainless steel
(2 pieces)
45 – 3356
45 – 3357
LoCAToR® Female Analog45 (4 pieces)
D4
D5
45 – 3358
LoCAToR® Black Processing Replacement Male46
(4 pieces)
45 – 3359
LoCAToR® Block-out Spacer47 (20 pieces)
45 – 3361
LoCAToR® Processing Spacer48 (4 pieces)
45 – 3340
LoCAToR® Core Tool49 3-piece
45 – 3341
LoCAToR® Abutment Holder Sleeve50 (4 pieces)
45 – 3344
FRIADENT® LoCAToR® Insert for Prosthetic Ratchet6
45 – 3345
LoCAToR® Angle Measurement Guide51
45 – 3346
LoCAToR® Parallel Post46 (4 pieces)
Please use the XiVE® LoCAToR®
Abutments for FRIALIT® implants.
A 100% compatibility is given.
XiVE® LoCAToR®
n Overdenture in toothless jaw on
two implants
n Self-righting design for easy fixation
in the mouth with one click
n Low height to give more room, even
under limited space conditions
n Flexible retention for individual
determination of prosthesis fixation and
balancing of axial divergencies up to 40°
INSTRuMENTS
Insert LoCAToR® abutment:
LOCATOR® Core Tool 3-piece or
FRIADENT® LOCATOR® Insert for
Prosthetic Ratchet (page 41)
PRoSTHETICS
order no.
Content LoCAToR®
Male Processing Package:
2 x Matrix
2 x Block-Out Spacer
2 x Replacement Male
clear, strong retention
pink, light retention
blue, extra light retention
31
Prosthetic Components “Multi-Purpose”
FABRICATION OF THE SUPRASTRUCTURE ON GINGIVA LEVEL
Transgingival Extension,
Temporary Sealing
MP Abutment
order no.
FRIADENT® MP Abutment
n For simple and accurate fabrication
of bridges with cast-to or, more economically, with castable waxing sleeve
n For fixing overdentures by bar
construction
n Inserted abutments remain in the
mouth, the laboratory operates on
analogs
n Simplified supragingival impressions
and scaffold try-in
The MP Abutment consists of MP
Abutment Insert and MP Insert Screw.
The appropriate MP Abutment is
selected according to the gingival height.
The number of grooves on the screw
head indicates the gingival height of
the matching Abutment Insert.
GH 1 = 1 ring
GH 2 = 2 rings
GH 3 = 3 rings
GH 5 = 5 rings
INSTRuMENTS
Placement of MP Abutment Inserts on
the implant:
Attachment Insert and MP Insert
(page 41)
Fixation of MP Insert Screw:
MP Insert Screw (page 41)
Placement of MP Cover Screw:
32
Article
FRIADENT® MP Abutment
MP Abutment Insert and MP Insert Screw
46 – 2831
46 – 2832
46 – 2833
46 – 2835
D
D
D
D
3.4
3.4
3.4
3.4
/
/
/
/
GH
GH
GH
GH
14
24
34
54
46 – 2841
46 – 2842
46 – 2843
46 – 2845
46 – 2849
D
D
D
D
D
3.8
3.8
3.8
3.8
3.8
/
/
/
/
/
GH
GH
GH
GH
GH
12/4
22/4
32/4
52/4
92/4
46 – 2851
46 – 2852
46 – 2853
46 – 2855
46 – 2859
D
D
D
D
D
4.5
4.5
4.5
4.5
4.5
/
/
/
/
/
GH
GH
GH
GH
GH
12/4
22/4
32/4
52/4
92/4
46 – 2861
46 – 2862
46 – 2863
46 – 2865
D
D
D
D
5.5
5.5
5.5
5.5
/
/
/
/
GH
GH
GH
GH
12/4
22/4
32/4
52/4
FRIADENT® MP Cover Screw2
46 – 1430
46 – 1440
46 – 1450
46 – 1460
D 3.4
D 3.8
D 4.5
D 5.5
Impressions
Impressions – Sets
order no.
Article
FRIADENT® MP Lab Set Pickup Impression
Content: MP PickUp Impression Coping,
MP PickUp Guide Pin, MP Analog
46 – 8230
46 – 8240
46 – 8250
46 – 8260
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® Impression Coping
n For transferring the abutment
position of to the master model
n Available for PickUp (open tray)
and transfer technique
n The pre-mounted MP Abutment
remains in the implant when making
impressions
FRIADENT® MP Lab Set Transfer Impression
Content: MP Transfer Impression Coping,
MP Analog
46 – 8130
46 – 8140
46 – 8150
46 – 8160
D 3.4
D 3.8
D 4.5
D 5.5
Article
FRIADENT® MP Pickup
Impression Coping2
46 – 1630
46 – 1640
46 – 1650
46 – 1660
D 3.4
D 3.8
D 4.5
D 5.5
INSTRuMENTS
Fixation of MP Pickup Guide Pin:
Placement of MP Transfer Impression
Coping:
FRIADENT® MP Transfer
Impression Coping2
46 – 1635
46 – 1645
46 – 1655
46 – 1665
D 3.4
D 3.8
D 4.5
D 5.5
46 – 1615
FRIADENT® MP Pickup Guide Pin4
order no.
Article
Implant Analog
FRIADENT® MP Analog5
46 – 4030
46 – 4040
46 – 4050
46 – 4060
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® MP Analog
Included in delivery of the MP
Lab Sets Impression
n Is forwarded to the lab with the
impression
n
33
PRoSTHETICS
order no.
Prosthetics/Lab: Bridges
Bridges – Sets
order no.
FRIADENT® MP Lab Sets Bridge
n For simple and accurate fabrication
of bridges with cast-to or, more economically, with castable waxing sleeve
n Can also be used to mill customized
bar constructions
Article
FRIADENT® MP Lab Set Bridge
with Castable Waxing Sleeve
Content: Castable Waxing Sleeve,
MP Screw for Waxing Sleeve
46 – 9530
46 – 9540
46 – 9550
46 – 9560
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® MP Lab Set Bridge
with Cast-to Waxing Sleeve
Content: Cast-to Waxing Sleeve,
MP Screw for Waxing Sleeve
46 – 9930
46 – 9940
46 – 9950
46 – 9960
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® PassivFit Set
45 – 4830
45 – 4840
45 – 4850
45 – 4860
34
D 3.4
D 3.8
D 4.5
D 5.5
Bridges – Single Components
order no.
Article
FRIADENT® Castable Waxing Sleeve21
45 – 4330
45 – 4340
45 – 4350
45 – 4360
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® Cast-to Waxing Sleeve20/8
45 – 4630
45 – 4640
45 – 4650
45 – 4660
46 – 4300
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® MP Screw
for Castable Waxing Sleeve4
D 3.4 – D 5.5
Castable Waxing Sleeve:
Prior to bridge delivery, the contact
surface between crown and abutment
and the screw and screw seat are
smoothed using the FRIADENT® Finishers
(page 41)
Cast-to Waxing Sleeve:
Smoothing with finishers is not
necessary.
INSTRuMENTS
Placement of MP Screw for Waxing
Sleeve:
FRIADENT® Hex-Driver 1.22 mm (page 40)
Soldering Analogs
Article
45 – 4102
FRIADENT® Lab Set Soldering
Analog for Bridge
FRIADENT® Soldering Analog, universal
and Soldering Screw for Bridge
D 3.4 – D 5.5
45 – 4103
FRIADENT® Soldering Analog6, universal
D 3.4 – D 5.5
45 – 4207
FRIADENT® Soldering Screw for Bridge4
D 3.4 – D 5.5
FRIADENT® Soldering Analog
n For securing the framework in the
soldering base
PRoSTHETICS
order no.
35
Prosthetics/Lab: Bars
Bars – Sets
order no.
FRIADENT® MP Lab Sets Bar
n For fixing overdentures by bar
construction
n Simple and standardized procedure
with pre-fabricated round bars
(see single components)
Customized milled bars are fabricated
with castable crown bases (page 34/35).
Article
FRIADENT® MP Lab Set
Gold Bar Coping
Content: Gold Bar Coping,
MP Coping Screw
46 – 9630
46 – 9640
46 – 9650
46 – 9660
D 3.4
D 3.8
D 4.5
D 5.5
Titanium Bar Coping
Content: Titanium Bar Coping,
MP Coping Screw
46 – 9637
46 – 9647
46 – 9657
46 – 9667
D 3.4
D 3.8
D 4.5
D 5.5
Castable Bar Coping
Content: Castable Bar Coping,
MP Coping Screw
46 – 9638
46 – 9648
46 – 9658
46 – 9668
36
D 3.4
D 3.8
D 4.5
D 5.5
Bars – Single Components
order no.
Article
FRIADENT® Gold Bar Coping9
(without screw)
45 – 4230
45 – 4240
45 – 4250
45 – 4260
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® Bar Coping
Gold alloy for soldering technique
n Titanium for laser welding
n Cast-to for customized waxing
n
FRIADENT® Titanium Bar Coping2
(without screw)
45 – 4231
45 – 4241
45 – 4251
45 – 4261
D 3.4
D 3.8
D 4.5
D 5.5
FRIADENT® Castable Bar Coping21
(without screw)
D 3.4
D 3.8
D 4.5
D 5.5
46 – 4200
FRIADENT® MP Coping Screw4
D 3.4 – D 5.5
45 – 4210
FRIADENT® Gold Bar round9
50 mm length
45 – 4212
FRIADENT® Titanium Bar round2
50 mm length
45 – 4215
FRIADENT® Gold Bar Clip9
50 mm length
INSTRuMENTS
Placement of MP Coping Screw:
FRIADENT® Hex Driver 1.22 mm
(page 40)
PRoSTHETICS
45 – 4530
45 – 4540
45 – 4550
45 – 4560
Activating the Bar Clip:
FRIADENT® Bar Clip Activator
(page 41)
Soldering Analogs
order no.
Article
45 – 4101
FRIADENT® Lab Set Soldering
Analog for Bar
FRIADENT® Soldering Analog, universal
and Soldering Screw for Bar
D 3.4 – D 5.5
45 – 4103
FRIADENT® Soldering Analog6 universal
D 3.4 – D 5.5
45 – 4206
FRIADENT® Soldering Screw for Bar4
D 3.4 – D 5.5
FRIADENT® Soldering Analog
n For securing the framework in
the soldering base
37
Prosthetic Instruments
Instrument Sets
order no.
Article
46 – 7000
FRIADENT® Prosthetic Set Mini
The Prosthetic Set Mini includes all
instruments required for the prosthetic
delivery of implant restorations
(“Esthetic” protocol).
Content:
FRIADENT® Ratchet
Ratchet Hex Driver 0.9 mm/short
45 – 8111
FRIALIT® Basic Set Prosthetics
The set includes all clinical instruments
necessary for impression making and
prosthetics. The instruments are supplied
in the FRIALIT® Prosthetic Tray.
Content:
FRIADENT® Ratchet
Handpiece Hex Driver 0.9 mm
Handpiece Hex Driver 1.22 mm
Ratchet Hex Driver 1.22 mm/long
Ratchet Slot Screwdriver 2.0 mm/long
Seating Instrument for Trasfer Coping
and MH-6 Abutment/A 0
Seating Instrument for Attachment Insert
and MP Insert
Handpiece Seating Instrument for
MP Insert Screw
Handpiece Seating Instrument for
MP Insert Screw
48 – 0030
38
FRIALIT® Prosthetic-Tray (empty)
Instruments for uncovery
order no.
Article
FRIADENT® Tissue Punch6
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
45 – 5338
45 – 5348
45 – 5358
45 – 5368
45 – 5378
FRIALIT® BoneProfiler6
D 3.4
D 3.8
D 4.5
D 5.5
D 6.5
45 – 5300
FRIALIT® Guide Pin for BoneProfiler
45 – 5550
FRIADENT® Soft Tissue Gauge6
FRIALIT® BoneProfiler
n For removal of excessive bone on top
of the implant cover screw at the stage of
uncovery
n Design similar to that of the gingiva
former
PRoSTHETICS
45 – 5666
45 – 5660
45 – 5661
45 – 5662
45 – 5663
39
Prosthetic Instruments
Single Instruments
order no.
Article
45 – 5709
FRIADENT® Ratchet6
without inserts
FRIADENT® Ratchet Hex Driver6
with torque limit
45 – 5732
45 – 5733
45 – 5734
45 – 5736
Width 0.9 mm/14 Ncm/short
Width 0.9 mm/14 Ncm/long
Width 1.22 mm/24 Ncm/short
Width 1.22 mm/24 Ncm/long
FRIADENT® Ratchet Slot Screwdriver6
with torque limit
45 – 5714
45 – 5722
Blade width 2.0 mm/14 Ncm/short
Blade width 2.0 mm/14 Ncm/long
FRIADENT® Handpiece HexDriver6
46 – 5710
46 – 5720
46 – 5711
46 – 5721
Width 0.9 mm/short
Width 0.9 mm/long
Width 1.22 mm/short
Width 1.22 mm/long
FRIADENT® Handpiece Slot Screwdriver6
46 – 5712
46 – 5722
Blade width 2.0 mm/short
Blade width 2.0 mm/long
This handle fits all handpiece drivers.
46 – 5750
FRIADENT® Handle
for Handpiece Hex Driver6
The 0.9 mm FRIADENT® Hex Driver
without torque limit is recommended
for regions with limited access.
45 – 5650
FRIADENT® Hex Driver6
without torque limit, width 0.9 mm
45 – 5618
Mounting device for Hex Driver
45 – 5750
FRIADENT® CeraBase Tool Set
Content: Medium Diamond Drill, Fine
Diamond Drill, Rubber Polishing Wheel
45 – 5733
FRIADENT® CeraBase Medium
Diamond Drill
45 – 5755
FRIADENT® CeraBase Fine Diamond Drill
45 – 5758
FRIADENT® CeraBase Rubber Polishing
Wheels (5 pieces)
40
Single Instruments
order no.
Article
45 – 5605
FRIADENT® Seating Instrument2
for Transfer Coping
45 – 5617
FRIADENT® Seating Instrument2
for Attachment Insert and MP Insert
46 – 5610
FRIADENT® Ratchet Seating Instrument6
for MP Insert Screw
with torque limit
46 – 5615
FRIADENT® Handpiece Seating Instrument6
for MP insert screw for contra-angle handpie-
45 – 5621
FRIADENT® Activator6 for Ball and
Socket Attachment
45 – 5622
FRIADENT® Deactivator6 for Ball and
Socket Attachment
45 – 3340
LoCAToR® Core Tool49 3-piece
45 – 3344
FRIADENT® LoCAToR®
Insert for Prosthetic Ratchet6
45 – 3345
LoCAToR® Angle Measurement Guide51
45 – 5623
FRIADENT® Bar Clip Activator6
45 – 5702
FRIADENT® Finisher6/10
for Horizontal Screw Set
PRoSTHETICS
ce
FRIADENT® Finisher6/10 for Abutment Seat
for Screw-retained Suprastructures
45 – 5705
45 – 5707
45 – 5700
45 – 5709
45 – 5623
D 3.4 – D 4.5
D 5.5
FRIADENT® Finisher6/10
for Screw Head Seat for
Screw-retained Suprastructures
45 – 5621
45 – 5622
41
Presentation Material
Demo-Modelle
order no.
Article
45 – 9981
FRIADENT® Acrylic Model Maxilla
without prosthetics
(ANKYLOS®, XiVE®, FRIALIT®)
45 – 9982
FRIADENT® Acrylic Model Maxilla
with prosthetics
(ANKYLOS®, XiVE®, FRIALIT®)
Patient Information Material
order no.
Article
5 – 002032
DENTSPLy Implants Waiting room brochure
5 – 402001
FRIALIT® Indication poster
5 – 001033
DENTSPLy Implants Dental Implant Pass
CD-RoMs for Presentations
42
order no.
Article
66 – 4050
FRIALIT® Picture CD
66 – 1036
DENTSPLy Implants Picture CD
66 – 1037
CERCoN® Picture CD
66 – 1038
Picture CD for Internet, all systems
66 – 1039
FRIADENT® plus Picture CD
Materials
Metals
Type
Index
Composition
Titanium
Titanium
Titanium
Titanium
Aluminium Ti grade 1
Ti grade 2
Ti grade 4
Ti6Al4V grade 5
AlMg3
Stainless steel
Stainless steel
Stainless steel
Brass
Cast-to alloy*
Gold alloy**
Hard metal
Polyethylen/Aluminium
Polyamid/Polyethylen/Stainless steel/Plastics Polyamid/Polyethylen/Stainless steel/Plastics Aluminium
Brass/Polyoxymethylene
Brass/Polysulfon
1
2
3
4
5
6
49
51
7
8
9
10
42
43
44
45
48
50
Surgical Steel
316L SS SS/303 SE
316L SS
CuZn
Au: 60%, Pt: 19%, Pd: 20%, Ir: 1%
Au: 68,6%, Pt: 2,4%, Pd: 4%, Ag: 11,8%, Cu: 10,6%, Ir: 0,1%, Zn: 2,5%
K 40
LDPE/6061 T6 Al
Nylon/LDPE/Ti6AI4V/Silicone Rubber
Nylon/LDPE/303 SE SS/Silicone Rubber
6061 T6 Aluminum
MS-002, DELRIN, 1/4"
MS-013-1 POLYSULFONE (3/8")
*TEC 11.9 x 10-6 K-1, pre-heating temperature < 850°C, cast temperature < 1450°C; ** melting interval from 880 – 940°C
Plastics
Polyoxymethylene (POM)
Index
Polypropylene
Polyamid
Polyethylen/Aluminium
Polyamid/Polyethylen/Stainless steel/Plastics Polyamid/Polyethylen/Stainless steel/Plastics Polyethylen
Brass/Polyoxymethylene
Brass/Polysulfon
Polymethylmethacrylate (PMMA)
Polystyrene
Polytetrafluourethylene Polyetheretherketone (PEEK)
Polyetherimide
Silicone
Silicone
Polycarbonate
20
21
22
23
24
25
26
47
27
28
41
42
43
44
46
48
50
Composition
Silicone Rubber
Zytel 101l Nylon
LDPE/6061 T6 Al
Nylon/LDPE/Ti6AI4V/Silicone Rubber
Nylon/LDPE/303 SE SS/Silicone Rubber
LDPE
MS-002, DELRIN, 1/4"
MS-013-1 POLYSULFONE (3/8")
Ceramics
Type
Index
Composition
Aluminium oxide 30
Al2O3
Hydroxyapatite
31
Ca5(PO4 )3OH
Zirconium dioxide
32
ZrO2
43
presentation MATERIAL
Type
Order no. 6-402053/006
Some products may not be available in all countries.
Please contact your DENTSPLY Implants representative to obtain
up to date information on the product range and on availability.
Manufacturer:
DENTSPLY Implants Manufacturing GmbH · P.O. Box 71 01 11 · 68221 Mannheim/Germany
Phone +49 621 4302-000 · Fax +49 621 4302-001 · e-mail: [email protected]
Manufacturer of XiVE® Locator®:
ZEST ANCHORS, LLC. · 2061 Wineridge Place · Escondido, CA 92029/USA
EC Representative: Wellkang Ltd. · 29 Harley St. W1G 9QR London/ U.K.
www.dentsplyimplants.com
0613/0.5/SB
Manufacturer of FRIOS® Handpieces and FRIOS® Unit S/i:
W&H Dentalwerk Bürmoos GmbH · 5111 Bürmoos/Austria

Product Catalog - DENTSPLY Implants

Transcription

Similar documents

Product Catalog - DENTSPLY Implants

Product Catalog - DENTSPLY Implants

Natürlicher Knochenaufbau und knochensparende

Product Catalog - DENTSPLY Implants

FRIADENT® - DENTSPLY Implants

Ankylos Catalog - DENTSPLY Implants

NobelReplace® and Replace Select™ Tapered