Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

Transcription

Founded in 1843 in New Britain, Connecticut, the
Stanley Works’ early credits include the first hinge
hasp, the first crate hinge, the first hinge with reinforced
joint, the first “blind” hinge, and in 1899, the first patent
for a ball-bearing hinge.
Today, Stanley is a global organization supplying hardware
and tools for the architectural, consumer, industrial, and
residential markets worldwide. Utilizing state-of-the-art
research, manufacturing and quality-control capabilities
that incorporate the latest techniques, procedures and
equipment, Stanley continues to deliver the innovative,
high quality products that have made the Stanley name
synonymous with the highest craftsmanship and
dependability for more than 150 years.
To our valued customers, we appreciate your loyalty over
the years and proudly present our Hardware offering.
Gate
T-Hinge
Latch
Shutter & Blind
Reinforcement
Corner Brace
Hasps
Safety Hasp
Bolts
Bolts
Barrel Bolt
BiFold/Slide Hardware
Bifold Panel Hardware (30 lbs.)
Bifold Panel Bagset Hardware (30 lbs.)
Bifold Panel Hardware (125 lbs.)
Bifold Panel Hardware Components
Panel By-Pass Hardware (60 lbs.)
Sliding Door Hardware Components
Pocket Door Hardware (75 lbs.)
Pocket Door Hardware Frame (150lbs.)
Pocket Door Hardware (250 lbs.)
Pocket Door Components
Strap
Strap Hinge
Residential Hinges
Residential Hinge
Bulk Assembled Hinge
Accessories
Spring Hinge
Utility Hinge
Garage
Accessories
Wire Goods
Turnbuckles
Screen/Storm
Hinge
Sash Hardware
Accessories
Storage
Closet
Track & Hanger
Box Track
Round Track
Accessories
417
Home Hardware
Doorstop
Handrail Bracket
Door Trim
Cabinet Hardware
Hobby/Craft Hardware
Support/Brace
Hooks
East – Pennsylvania
Midwest – Missouri
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
F SERIES
Standard Weight Hinges
FIVE KNUCKLE FULL MORTISE HINGES
F179 (ANSI A8133) available in steel finish
F191 (ANSI A5133) available in steel finish.
• For use on internal or external doors without door closers
in hospitals, churches, schools, airports, hotels, malls, apartment
houses, office buildings, etc.
• All hinges have template screw hole location for use
on either wood or hollow metal doors and frames.
• Steel hinges are polished and plated to insure a fine durable finish.
• Equipped with easily seated non-rising pins.
• Pins in nonferrous hinges are stainless steel.
-+
Class
F179
F191
EDP No.
05 0489
05 0483
05 0486
05 0484
05 0551
05 0546
05 0549
05 0043
05 0038
03 7186
Non–Removable Pins
F179
05 0539
05 0071
05 0073
Note: F179 is available in
Finish
3
10A
26
26D
3
10A
26D
3
26D
32D
Size Open
Inches
(MM)
31/2 x 31/2
(89 x 89)
31/2 x 31/2
(89 x 89)
31/2 x 31/2
(89 x 89)
31/2 x 31/2
(89 x 89)
4x4
(102 x 102)
4x4
(102 x 102)
4x4
(102 x 102)
41/2 x 41/2 (114 x 114)
41/2 x 41/2 (114 x 114)
31/2 x 31/2
(89 x 89)
26D
4x4
(102 x 102)
10A
41/2 x 41/2 (114 x 114)
26D
41/2 x 41/2 (114 x 114)
“wide throw hinges”. Specifications on
Gauge of Metal
Inches (MM)
.123
(3.1)
.123
(3.1)
.123
(3.1)
.123
(3.1)
.130
(3.3)
.130
(3.3)
.130
(3.3)
.180
(4.6)
.180
(4.6)
.123
(3.1)
.130
.180
.180
request.
(3.3)
(4.6)
(4.6)
Flat Head Screws/per Piece
Machine
Wood
6 - 10 - 24 x 1/2
6 - 10 x 1
6 - 10 - 24 x 1/2
6 - 10 x 1
6 - 10 - 24 x 1/2
6 - 10 x 1
6 - 10 - 24 x 1/2
6 - 10 x 1
1
8 - 12 - 24 x /2
8 - 12 x 11/4
1
8 - 12 - 24 x /2
8 - 12 x 11/4
1
8 - 12 - 24 x /2
8 - 12 x 11/4
1
8 - 12 - 24 x /2
8 - 12 x 11/4
8 - 12 - 24 x 1/2
8 - 12 x 11/4
6 - 10 - 24 x 1/2
6 - 10 x 1
8 - 12 - 24 x 1/2
8 - 12 - 24 x 1/2
8 - 12 - 24 x 1/2
8 - 12 x 11/4
8 - 12 x 11/4
8 - 12 x 11/4
FIVE KNUCKLE "SWING CLEAR" HINGES
F248 (ANSI A8123) Steel — polished and plated or phosphated
and prime coated for painting.
418
• Available for full mortise application on square edge doors only.
• Designed to replace existing 31/2" (89 mm)
or 4" (102 mm) hinges for Swing Clear openings.
• For residential use, ideal for remodeling or new construction.
• Designed to swing doors completely clear
of the opening when door is opened 95°.
• Consult factory for hinges available to clear at 90°.
Class
F248
EDP No.
05 4503
05 5152
Finish
4
4
Size Length of Joint
Inches
(MM)
1
3 /2
(89)
4
(102)
Gauge of Metal
Inches (MM)
.123
(3.1)
.130
(3.3)
Flat Head
Wood Screws per piece
6 - 10 x 1
8 - 12 x 11/4
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
30 Lb. Bifold Panel Hardware
30 LB. BIFOLD PANELS
• For installation of 2 or 4, 7/8" (22 mm) to
13/8" (35 mm) thick panels weighing up to 30 lbs.(13,6 kg) each.
• Spring-loaded top pivot and roller guide for easy installation.
• Durable pre-painted track.
• All metal components galvanized against corrosion.
• Permanently lubricated roller guide.
• Panel width equals known finished opening width
divided by number of panels, less 1/4" (6.4 mm).
• Opening width equals known finished panel width
plus 1/4" (6.4 mm), multiplied by number of panels.
• Door height equals 15/8" (41 mm) less than finished opening height.
• BF30, BLC30 conforms to ANSI A156.14 type D8622.
• Cross Reference: Stanley 2800/2900 Series, Cox 43/48,
Crowder CF-100, Grant 2600 Series, Henderson B Series,
Johnson 1800, Sterling 9000.
TWO PANEL COMPLETE PACKAGED RETAIL SET
• For minimum 1" (25.4 mm) thick panels — 7/16" hole drilling.
• Boxed set consists of:
1ea. BF30-01 (Track),
BF30-22 (Snugger),
BF30-31 (Top Pivot),
BF30-32 (Guide Wheel),
BF30-33 (Bottom Pivot),
1 pr. 220-3 (Hinge),
1 ea. BF50-62 (Knob) and
BF30-81 (Jamb Bracket).
EDP No.
40 2032
Size
36" Opening
No. of Panels
2
Finish
White
419
Class
BF30-00-36
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
30 Lb. Bifold Panel Bagset Hardware
TRACK WITH PIVOT BRACKET
•
•
•
•
Use to guide door through opening.
For 30 lb. bifold panels.
Prefinished white.
Steel.
Class
BF30-01-24
BF30-01-30
BF30-01-48
BF30-01-60
BF30-01-72
EDP No.
52 2004
52 2032
52 2068
52 2092
52 2120
Size
233/4"
293/4"
473/4"
593/4"
713/4"
No. of Panels
2
2
4
4
4
Finish
White
White
White
White
White
TWO PANEL BAGSETS — 3/8" HOLE DRILLING
• Use on two 30 lb. (13.6 kg.) bifold panels.
• 3/8" (9.5 mm) diameter plastic top and plastic bottom pivot.
• Polybag set includes the following items:
FOUR PANEL BAGSETS — 3/8" HOLE DRILLING
• Use on four 30 lb. (13.6 kg) bifold panels.
• 3/8" (9.5 mm) diameter plastic top and plastic bottom pivot.
• Polybag set includes the following items:
For Use with BF30 Slide Guide
EDP
No.
52 2007
BF50-72
Aligner
1
BF30-81
Jamb
Bracket
2
BF30-33
Bottom
Pivot
2
BF30-31
Top
Pivot
2
BF30-32
Guide
Wheel
2
BF30-24
Snugger
(2Dr)
1
BF50-62
Wood
Knob
–
420
Bagset
Catalog
No.
2453
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
125 Lb. Bifold Panel Hardware
125 LB. BIFOLD PANELS
• For installation of two panels weighing up to 125 lbs. (56.8 kg) each
or multi-panels weighing up to 75 lbs. (34.1 kg) each,
11/8" (28.6 mm) to 13/4" (44 mm) thick. For thicker panels,
consult factory.
• Large ball-bearing wheels provide smooth action.
• Easy-to-install snap-feature makes hangers a “snap” to install.
• Durable V-groove aluminum track provides smooth, quiet operation.
• All metal components zinc plated to guard against corrosion.
• Heavy-duty pivot set designed for durability and aesthetics.
• Panel width equals known finished opening width divided by
number of panels, less 1/4" (6.4 mm).
• Opening width equals known
finished panel width plus 1/4"
(6.4 mm), multiplied by
number of panels.
• Door height equals 27/8"
(73 mm) less than finished
opening height.
• For multi-panel sizing information,
contact Stanley Customer Service.
• BFC125 conforms to
ANSI A156.14 types D8621,
D8641, D8651, D8661.
• Cross Reference: Stanley
2700 Series, Cox 42-200,
Henderson 301H, Sterling
Series 1870.
FOUR PANEL BIFOLD DOOR SET
COMPLETE PACKAGED CONTRACTOR SET
1 ea.
BP250N-01 (Track),
2 ea.
BF125N-21 (Snugger),
1 set
BF125N-31 (Pivot Set),
2 ea.
BF125N-41 (Hanger),
6 ea.
741 (Hinges) and
1 ea.
BP250-99 (Wrench)
EDP No.
Size
No. of Panels
40 5254 60" Opening
4
40 5264 72" Opening
4
Units of
Measure
Set
Set
421
Class
BFC125N-00-60
BFC125N-00-72
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
SNUGGER
• Holds doors snug.
Class
BF30-22
EDP No.
52 2240
No. of Panels
2
Finish
2C
Units of
Measure
Each
SLIDE GUIDE
• For use on BF–30 track.
• Replaces top guide wheel and snugger.
Class
BF30-25
EDP No.
52 2372
No. of Panels
Finish
Units of
Measure
Each
TOP PIVOT
• Use with top pivot brackets on door panel.
Class
BF20-31
BF30-31
BF50-34
EDP No.
52 4208
52 2612
52 2272
Size
–
(3/8” Hole)
(7/16” Hole)
Finish
2C
2C
2C
Units of
Measure
Each
Each
Each
BF20–31
BF50–34
TOP GUIDE WHEEL
• Provides door movement on track.
• Spring loaded.
EDP No.
52 2620
52 2280
Size
(3/8” Hole)
(7/16” Hole)
Finish
2C
2C
Units of
Measure
Each
Each
422
Class
BF30-32
BF30-35
BF30–35
BF30–32
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
BOTTOM PIVOT
• Provides vertical adjustment of doors.
• Slips into jamb bracket at floor lever and can be moved horizontally.
Units of
Class
EDP No.
Size
Finish
Measure
BF30-33
52 4212
(3/8” Hole)
2C
Each
7
BF30-36
52 3248
( /8” Hole)
2C
Each
BF50-33
52 2276
(7/16” Hole)
2C
Each
JAMB BRACKET
• Easy horizontal adjustment.
Class
BF30-81
EDP No.
52 4200
Size
3
/4” Screws
Finish
2C
Units of
Measure
Each
Size
Finish
2C
Units of
Measure
Each
Finish
2C
Units of
Measure
Each
ADJUSTING WRENCH
• Use to adjust hardware.
Class
BP250-99
EDP No.
52 2232
HANGER
Two–wheel hanger with guide wheel.
For 50 lb. Bifold doors.
For use with BF50-01 track.
Long wearing Delrin wheels.
Provides for vertical adjustment.
Smooth quite operation.
Class
BF50-41
EDP No.
40 2303
Size
423
•
•
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
NON–MORTISE HING
• For surface mounting.
• No mortising required.
Class
220–3
EDP No.
52 1012
220–3LS
52 1016
Size
With Screws
(Inline Holes)
With Screws
(Inline Holes)
Finish
Brass Tone
Units of
Measure
Pair
Brass Tone
Pair
–FLATBACK HINGE
• For medium-density fiberboard (MDF) panels.
• Mounts to the back of door panels.
Class
234
EDP No.
52 1076
Size
No Screws
Finish
2C
Units of
Measure
Pair
Finish
Wood
Units of
Measure
Each
WOOD KNOB
• Stain or paint to match decor.
• Use on two or four door panel doors.
• For easy door opening and closing.
EDP No.
52 1280
Size
11/2"
424
Class
BF50-62
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
ALIGNERS
• For use in four door installations.
• Use on all door sizes.
• Brings leading door edges into alignment.
Class
BF50-72
EDP No.
52 2224
Finish
2C
Units of
Measure
Pair
GUIDE ROLLER
•
•
•
•
Adjustable high performance lubricated thermoplastic guide.
7
/16” diameter shank.
Use with 50–125 lb. Bifold doors.
Used with BF125–91 floor guide track.
Class
BF125–71
EDP No.
40 2309
Finish
2C
Units of
Measure
Each
HANGER
• Four large ball bearing wheels, easy snap–in installation
feature.
• Commercial duty.
• For use in bifold applications.
• For use with BP250–01 track.
EDP No.
40 5301
Finish
ST4C
Units of
Measure
Each
425
Class
BF125N–41
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
60 Lb. Panel By-Pass Door Hardware
60 LB. PANEL BY-PASS DOORS
• For installation of two by-passing doors, with 3/4" (19 mm) to
13/8" (35 mm) thick panels weighing up to 60 lbs. (27.3 kg) each.
• Slotted hangers easy to adjust.
• Self-aligning wheel system.
• Permanently lubricated thermoplastic wheel.
• Supports panels weighing up to 60 lbs. (27.3 kg).
• Vertical adjustments can be made after installation.
• Hanger system allows for easy panel removal.
• V-groove galvanized steel or aluminum track provides
smooth, quiet operation.
• Spring-loaded top pivot and roller guide for easy installation.
• Permanently lubricated roller guide.
• Durable pre-painted track.
• All metal components galvanized against corrosion.
• Panel width equals known finished opening width plus 1" (25.4 mm)
per overlap, divided by number of panels.
• Opening width equals known finished panel width multiplied by
number of panels, less 1" (25.4 mm) per overlap.
• For multi-panel sizing information, contact Stanley
Customer Service.
• BPC60, BPC60A, BP60 conform to
ANSI A156.14 type D8742; BPC60AF
conforms to type D8752, BFC30
conforms to ANSI A156.14 type D8622.
• Cross Reference: Stanley
8400/8700/8800/8900,
Cox 12-200/12-300, Crowder C-600,
Grant 6000/8000, Hager 9110,
Henderson W, Johnson 1166/2200,
Lawrence 502, Sterling 7810.
TWO DOOR COMPLETE PACKAGED
CONTRACTOR SETS —
STEEL TRACK
426
• Polybag set consists of:
1 ea.
BP75-01 (Track),
1 pr.
BP60-45 (Hanger),
1 ea.
BP150-71 (Floor Guide) and
2 ea.
BP150-61 (Finger Pull)
3
• For 1 /8" (35 mm) thick doors only.
No. of
Class
BPC60-00-48
BPC60-00-60
BPC60-00-72
Units of
EDP No.
40 3006
40 3008
40 3010
Size
48" Opening
60" Opening
72" Opening
Panels
2
2
2
Measure
Set
Set
Set
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
60 Lb. Panel By-Pass Dial Adjust Door
Hardware
60 LB. PANEL BY-PASS DIAL ADJUST DOORS
• For installation of two by-passing doors, with 3/4" (19 mm) to 13/8"
(35 mm) thick panels weighing up to 60 lbs. (27.3 kg) each.
• Provide for door adjustment without use of tools.
• Self-aligning wheel system.
• Permanently lubricated thermoplastic wheels.
• Supports panels weighing from 30 lbs. (13.6 kg) to 60 lbs. (27.3 kg).
• Hanger system allows for easy panel removal.
• V-groove galvanized steel or aluminum track provides smooth,
quiet operation.
• Panel width equals known finished opening width plus
1" per overlap, divided by number of panels.
• Opening width equals known finished panel width multiplied
by number of panels, less 1" (25.4 mm) per overlap.
• BPD60, BPD60A conform to ANSI A156.14 type D8742; BPD60AF
conforms to type D8752.
• Cross Reference: STANLEY 8400/8700/8800/8900,
Cox 12-200/12-300, Crowder C-600,
Grant 6000/8000, Hager 9110,
Henderson W Johnson 1166/2200,
Lawrence 502 Sterling 7810.
TWO DOOR COMPLETE PACKAGED RETAIL SETS —
STEEL TRACK
• For 3/4" (19 mm) and 13/8" (35 mm) thick doors.
• Boxed Set consists of:
1 ea.
BP75-03 (Track),
1 pr.
BP60-41 (Hanger),
1 pr.
BP60-42 (Hanger),
1 ea.
2 ea.
BP150-61 (Finger Pull)
EDP No.
40 3140
40 3150
40 3160
No. of
Panels
2
2
2
Size
48" Opening
60" Opening
72" Opening
Units of
Measure
Set
Set
Set
427
Class
BPD60-00-48
BPD60-00-60
BPD60-00-72
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
60 Lb. Panel By-Pass Dial Adjust
Door Hardware
TWO DOOR COMPLETE PACKAGED RETAIL SETS — ALUMINUM
1 ea. BP75-02 (Track),
1 pr. BP60-44 (Hanger),
1 ea. BP150-71 (Floor Guide) and
2 ea. BP150-61 (Finger Pull)
Class
BPD60A-00-60
EDP No.
40 3250
No. of
Panels
2
Size
60" Opening
Units of
Measure
Set
TWO DOOR COMPLETE PACKAGED RETAIL SETS — STEEL TRACK
• Set consists of:
1 ea. BP75-03 (Track),
2 ea. BP150-61 (Finger Pull)
EDP No.
40 3040
40 3050
40 3060
No. of
Panels
2
2
2
Size
48" Opening
60" Opening
72" Opening
Units of
Measure
Set
Set
Set
428
Class
BP60-00-48
BP60-00-60
BP60-00-72
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
150 Lb. Panel By-Pass
Door Hardware
• For Installation of two by-passing doors, with 13/8" (35 mm) to
13/4" (44 mm) thick panels weighing up to 150 lbs. (68 kg) each.
• Large 1" (25.4 mm) wheels provide smooth rolling action.
• Easy-to-install snap-in feature makes hangers a “snap” to install.
• Supports panels weighing up to 150 lbs. (68 kg).
• Durable V-groove aluminum track provides smooth, quiet operation.
• Track spacer allows for easy installation of bypass and tripass doors.
• Panel width equals known finished opening width plus 1" (25.4 mm)
per overlap, divided by number of panels.
• Opening width equals known finished panel width multiplied by
number of panels, less 1" (25.4 mm) per overlap.
• Door height equals 25/8" (66.7 mm) less than finished opening height.
• For multi-panel sizing information, contact Stanley Customer Service.
• BPC150N conforms to ANSI A156.14 type D8731; BPC150FN
conforms to type D8751.
• Cross Reference: Stanley 1700, Cox 15, Crowder C-500, Grant 7000,
Hager 9702, Henderson W Series, Johnson 134F/138F, Sterling 1602.
13/8" Doors
13/4" Doors
COMPLETE PACKAGED CONTRACTOR SETS
• Polybag set consists of:
BP250N-01 (Track),
1 pr.
TR250-01 (Track Spacer),
2 pr.
BP150N-41 (Hanger),
1 ea.
1 ea.
BP250-99 (Wrench)
Class
BPC150N-00-48
BPC150N-00-60
BPC150N-00-72
BPC150N-00-96
EDP No.
40 5664
40 5665
40 5666
40 5668
48"
60"
72"
96"
No. of
Panels
2
2
2
2
Size
Opening
Opening
Opening
Opening
Units of
Measure
Set
Set
Set
Set
429
2 ea.
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
250 Lb. Panel By-Pass Door Hardware
• For installation of two by passing doors, with 13/8"
to 13/4" thick panels weighing up to 250 lbs (113.6 kg). each.
• Large 1" wheels provide smooth rolling action.
• Easy-to-install snap-in feature makes hangers a “snap” to install.
• Supports panels weighing up to 150 lbs (68 kg).
• Durable V-groove aluminum track provides smooth,
quiet operation.
• Track spacer allows for easy installation of bypass and
tripass doors.
• Panel width equals known finished opening width
plus 1" (25.4 mm) per overlap, divided by number of panels.
• Opening width equals known finished panel width
multiplied by number of panels, less 1" (25.4 mm) per overlap.
• Door height equals 25/8" (66.7 mm) less than
finished opening height.
• For multi-panel sizing information, contact
Stanley Customer Service.
• BPC150N conforms to ANSI A156.14 type D8731.
• Cross Reference: Stanley 57/58, Crowder C-103-4,
Grant 1200, Hager 9875, Henderson S Series,
Lawrence F571/ED520, Sterling 1876.
13/8" Doors
13/4" Doors
430
2 ea. BP250N-01 (Track),
1 pr. TR250-01 (Track Spacer),
1 ea. BP250-99 (Wrench)
Class
BPC250N-00-60
BPC250N-00-72
BPC250N-00-96
EDP No.
40 5750
40 5760
40 5780
No. of
Panels
2
2
2
Size
60" Opening
72" Opening
96" Opening
Units of
Measure
Set
Set
Set
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
DOUBLE TRACK
• Use to guide door through track.
• For 75 lb. (34.1 kg) sliding doors.
• Steel with galvanized finish.
Class
BP75-01-48
BP75-01-60
BP75-01-72
BP75-01-96
BP75-03-96
EDP No.
54 1416
54 1420
54 1424
54 1436
59 3108
Size
461/2"
581/2"
701/2"
931/2"
937/8"
Finish
Galv.
Galv.
Galv.
Galv.
Galv.
Units of
Measure
Each
Each
Each
Each
Each
DOUBLE TRACK
•
•
•
•
Use to guide door through track.
For 65–75 lb. (34.1 kg) sliding doors.
Steel with galvanized finish or corrosion resistant aluminum
BP75–04 with fascia attachment.
Class
BP75-02-96
BP75-03-60
EDP No.
54 1248
54 3108
Size
933/8"
937/8"
Finish
AL
Galv.
Units of
Measure
Each
Each
TRACK
• Order 2 pieces per opening.
• Corrosion resistant aluminum.
• V-groove track provides smooth, quiet operation.
EDP No.
40 5104
40 5107
Size
72"
144"
Finish
AL
AL
13/4" Doors
Units of
Measure
Each
Each
13/8" Doors
431
Class
BP250N-01-72
BP250N-01-144
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
FASCIA
• Corrosion resistant aluminum.
• Stylized exterior.
Class
BP250N-02-72
Size
72"
Finish
AL
Units of
Measure
Each
Size
1
/4” Offset
1
/2” Offset
Finish
2C
2C
Units of
Measure
Pair
Pair
Finish
2C
2C
Units of
Measure
Pair
Pair
EDP No.
40 5202
TWIN WHEEL HANGER
• Side mounted.
• For use with doors up to 75 lbs.
• Used with BP75 tracks.
Class
BP75–43
BP75–45
EDP No.
54 1296
54 1304
SINGLE WHEEL HANGER
• Use on 60 lb. Sliding doors.
• Self–aligning wheel system.
• Permanently lubricated thermoplastic wheels.
• Used with BP75 tracks.
Class
BP60–43
BP60–45
EDP No.
54 1268
54 1284
Size
1
/4” Offset
1
/2” Offset
HANGER
• Four large ball bearing wheels, easy snap-in installation feature.
• Use with 250 lb By–Pass panels.
• Used with BP250N-01 Track.
EDP No.
40 5305
Finish
4C
Units of
Measure
Pair
432
Class
BP250N-41
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Sliding Door Hardware Component
HANGER
• Four wheel hanger with easy snap-in installation feature.
• For use with panels weighing up to 150 lbs. (68Kg).
Class
BP150N-41
EDP No.
40 5304
Finish
ST4C
Units of
Measure
Pair
STAY ROLLERS W/O SCREWS
• Use as a guide on large, sliding doors up to 21/4" thick.
• Reversible, can be used on either side of the frame.
• Convex roller wheel prevents gouging of door.
Class
DP18BC
EDP No.
N100-875
Finish
Zinc
Units of
Measure
Each
ADJUSTABLE FLOOR GUIDE
• Use with sliding doors to guide panels at floor level.
• Adjustable for 3/4" to 13/8" doors.
Class
BP150-71
BP150-75
EDP No.
54 1008
54 1012
Size
3/4" to 13/8"
3/4" to 13/8"
Finish
2C/White
2C/White
Units of
Measure
Each
Each
FLOOR GUIDE
• Use with sliding doors to guide panels at floor level.
• For 13/8" (35 mm) thick doors.
Class
BP150-72
EDP No.
54 1020
Size
13/8"
Finish
White
Finish
White
Units of
Measure
Each
Units of
Measure
Each
FLOOR GUIDE
Class
BP150-73
EDP No.
54 1000
433
• One pair per door.
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
75 Lb. Pocket Door Hardware
• For one sliding pocket or surface door 3/4" (19 mm) to
13/4" (44 mm) thick weighing up to 75 lbs. (34.1 kg).
• Pre-finished V-shaped track is jump-proof.
• Twin wheel hangers provide smooth and quiet operation.
• Adjust-n-lock hangers provide up to 5/8" (15.9 mm) vertical
adjustment.
• Track is shorter than opening to minimize the need for cutting.
• Two sets can be combined for installing
two sliding pocket or surface doors.
COMPLETE PACKAGED RETAIL SET
1 ea. PD75-01 (Track),
2 ea. PD250-71 (Guide),
1 ea. PD250-77 (Bumper) and
1 ea. BP25-99 (Wrench)
EDP No.
40 3903
No. of
Panels
1
Size
36" Opening
Units of
Measure
Set
434
Class
PD75-00-36
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
150 LB. POCKET DOOR FRAME
• For installation of pocket or bi-parting doors up to 3' (0.91 m) wide,
weighing up to 150 lbs. (68kg) each and up to 8' (2.55 m) high.
• Heavy-gauge, wraparound steel stiffener-reinforced split jambs.
• Four large 1" (25.4 mm) wheels for easy rolling action.
• Easy-to-install feature makes installation a “snap”.
• Supports panels weighing up to 150 lbs. (68 kg).
• Cut marks on header make for easy sizing.
• Non-handed steel header brackets for easy leveling of header
assembly.
• V-Groove jump proof aluminum track.
• Opening width equals door width multiplied by 2,
add 11/4" (31.8 mm).
• For Bi-Part: Sum of two doors multiplied by 2, add 1/4" (6.4 mm).
• Kits are sized for 3'0" (0.91 m) door
width and can be cut shorter at installation.
• For 6'8" Door: Height equals 841/2" (2.14 m) from finished floor.
• Kits are sized for 6'8", 7'0", or 8'0" door height and can
be cut shorter at installation.
• PDFC150N conforms to ANSI A156.14 type D8671.
• Cross Reference: Stanley 735/40-3925R/40-3940,
Crowder Crowderframe, Hager 9630/9631,
Johnson 1500, Sterling 1630.
• Set Consists of:
1 ea. PDF150-01 (Header Track),
2 ea. PD250-71 (Guides),
1 ea. PD250-77 (Bumper),
1 set PD250-51 (Jamb Studs),
1 ea. BP250-99 (Wrench),
2 ea. PDF150-05 (End Bracket) and
2 ea. PDF150-75 (Base Plates)
EDP No.
40 5940
40 5942
Size
3' x 7'0" Opening
3' x 8'0" Opening
Units of
Measure
Set
Set
435
Class
PDFC150N-00-70
PDFC150N-00-80
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
250 LB. POCKET DOOR
• For Installation of pocket or bi-parting doors up to 4' wide, weighing
up to 250 lbs. (113.6 kg) each and up to 8' (2.55 m) high.
• Heavy-gauge, wraparound steel stiffener-reinforced split jambs.
• Four large 1" (25.4 mm) ball bearing wheels for easy rolling action.
• Easy-to-install feature makes installation a “snap”.
• Supports panels weighing up to 250 lbs. (113.6 kg).
• Easy adjustment after installation.
• Cut marks on header make for easy sizing.
• Non-handed steel header brackets for easy leveling
of header assembly.
• V-groove jump proof aluminum track.
• Opening width equals door width multiplied by two,
add 11/4" (31.8 mm).
• For Bi-Part: Sum of two doors multiplied by two, add 1/4" (6.4 mm).
• Kits are sized for 4'0" door width and can be cut shorter at installation.
• Kits are sized for 8'0" door height and can be cut shorter
at installation.
• PDFC150N conforms to ANSI A156.14 type D8671.
• Cross Reference: Stanley 735/40-3925R/40-3940, Crowder
Crowderframe, Hager 9630/9631, Johnson 1500, Sterling 1630.
COMPLETE PACKAGED CONTRACTOR SET
1 ea. PDF250N-01 (Header Track),
1 pr. BP250N-41 (Hanger),
2 ea. PD250-71 (Guide),
1 ea. PD250-77 (Bumper),
1 set PDF250-51 (Jamb Studs),
1 ea. BP250-99 (Wrench),
2 ea. PDF250-75 (Base Plate) and
2 ea. PDF150-05 (End Bracket)
EDP No.
40 5950
Size
4' x 8'0" Opening
Units of
Measure
Set
436
Class
PDF250N-00
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Pocket Door Hardware Components
HANGER
• Four large ball-bearing wheels, easy snap-in installation feature.
• Use with 250 lb. (113.6 kg) By-Pass panels.
• Used with BP250N-01 tracks.
Class
BP250N-41
EDP No.
40 5305
Units of
Measure
Pair
Finish
4C
HANGER
• Four wheel hanger with easy snap-in installation feature.
• For use with panels weighing up to 150 lbs. (68Kg).
Class
BP150N-41
EDP No.
40 5304
Finish
ST4C
Units of
Measure
Pair
HANGER SET
1 pr. BP150N-43,
1 pr. BP150N-41,
1 ea. PD250-74,
1 ea. PD250-77 and
1 ea. BP250-99
Class
PD150N-HDW
EDP No.
40 5845
Finish
ST4C
Units of
Measure
Set
BOTTOM GUIDE
• Adjusts to center door in pocket.
• Guides bottom of door into pocket.
• Adjustable for door thickness.
EDP No.
40 3530
Finish
White
Units of
Measure
Each
437
Class
PD250-71
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Pocket Door Hardware Components
DOOR GUIDE
• Adjusts to center door in pocket.
• Guides bottom of door into pocket.
Class
PD250-72
EDP No.
40 3997
Size
For 13/4” Doors
Finish
2C
Units of
Measure
Each
CENTER STOP
• Attaches to track to limit panel travel.
• For use in bi–parting applications to prevent door over travel.
Class
BP250–77
Finish
2C
Units of
Measure
Each
Size
21/2" x 211/16"
Finish
3
EDP No.
40 0004
POCKET DOOR LATCH
• For doors 13/8" (35 mm) thick.
• All metal construction.
• Privacy locking feature.
Class
PD150-62
EDP No.
40 4010
Units of
Measure
Each
DELUXE POCKET DOOR PULL
• For doors 13/8" (35 mm) to 13/4" (44 mm) thick.
• All-metal construction.
• Perfect for larger doors.
Class
PD250-61
EDP No.
40 4030
Size
23/8" x 33/4"
Finish
3
Units of
Measure
Each
DELUXE POCKET DOOR LATCH
438
•
•
•
•
•
For doors 13/8" (35 mm) to 13/4" (44 mm) thick.
LifeSpan® Lifetime Warranty.
All-metal construction.
Privacy locking feature.
Perfect for larger doors.
Class
PD250-62
EDP No.
40 4040
Size
23/8" x 33/4"
Finish
3
Units of
Measure
Each
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Residential Hinges
RESIDENTIAL HINGE
•
•
•
•
For use on lightweight residential doors in low frequency applications.
Non-rising removable flush pin.
Five-knuckle, full-mortise design.
Available in square corners (741), 1/4" (6.4 mm) radius corners (RD741).
and 5/8" (15.9 mm) radius corners (RD758).
• Available with non-removable pins (NRP) and brass pins (BP).
• ST2H galvanized Weathergard™ finish options.
Class
741
741
741
741
741
741
741
741
741
741
741
741
741
741
EDP No.
08-1050
08 1090
08 1100
08 2060
08 2070
08 2090
08 2100
08 2275
08 2760
08 2761
08 3010
08 3060
08 3071
08 3100
Size
3" x 3"
3" x 3"
3" x 3"
31/2" x 31/2"
31/2" x 31/2"
31/2" x 31/2"
31/2" x 31/2"
31/2" x 31/2"
31/2" x 31/2"
31/2" x 31/2"
4" x 4"
4" x 4"
4" x 4"
4" x 4"
Corner
Radius
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Finish
2C
26D
4
3
26
26D
4
15A
1D
F8
10
3
26D
4
Units of
Measure
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
CD741
69 0287
31/2" x 31/2"
Square
3
Pack
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
RD741
08
08
08
08
08
08
08
08
08
08
08
08
08
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
4"
4"
4"
4"
4"
4"
1/4"
26
26D
3
4
15A
F8
10BL
15A
3
26D
4
F8
10BL
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
x
x
x
x
x
x
x
x
x
x
x
x
x
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
4"
4"
4"
4"
4"
4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
RD741
1 4
/"
CORNER
439
2440
2445
2470
2500
2504
2777
3519
1104
3331
3360
3400
3402
3520
741
SQUARE
CORNER
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Residential Hinges
RESIDENTIAL HINGE
•
•
•
•
For use on lightweight residential doors in low frequency applications.
Non-rising removable flush pin.
Five-knuckle, full-mortise design.
Available in square corners (741), 1/4" (6.4 mm) radius corners (RD741).
and 5/8" (15.9 mm) radius corners (RD758).
Class
CDRD758
EDP No.
75 0394
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
RD758
08
08
08
08
08
08
08
08
08
08
08
08
08
08
08
08
08
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
4"
4"
4"
4"
4"
4"
4"
4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
31/2"
4"
4"
4"
4"
4"
4"
4"
4"
Corner
Radius
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
Finish
15
Units of
Measure
Pair
15
15A
3
F8
14
26D
26
10BL
4
15A
15
26
F8
10BL
15
26D
3
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
Pair
RD758
5 8
/"
CORNER
440
1110
1107
2482
2488
2489
2584
3502
3517
3575
1105
1111
3506
3507
3518
3576
3579
3581
Size
4" x 4"
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Residential Hinges
SOLID BRASS RESIDENTIAL HINGE
•
•
•
•
•
For use on lightweight residential doors in low-frequency applications.
Stylized tip design for upscale appearance.
Non-rising pin, hole in bottom tip for easy removal.
Five-knuckle, full mortise design.
Available in square corners (749), and 1/4" (6.4 mm)
radius corners (RD741).
Class
749
749
749
EDP No.
08 3790
08 3800
08 3850
Corner
Size
3" x 3"
31/2" x 31/2"
4" x 4"
Radius
Square
Square
Square
Finish
3
3
3
Units of
Measure
Pair
Pair
Pair
CD749
80 0115
4" x 4"
Square
3
Pack
RD759
08 3830
31/2" x 31/2"
5/8"
3
Pair
CDRD759
80 0095
3" x 3"
5/8"
3
Packs
RD759
5 8
/"
CORNER
749 SQUARE
CORNER
RESIDENTIAL HINGE BULK ASSEMBLED
• For use on lightweight residential doors in low-frequency
applications.
• Non-rising removable flush pin available.
• Five-knuckle, full-mortise design.
• Available in 5/8" (15.9 mm) radius corners (RD758).
• Order screws separately (see hinge accessories).
EDP No.
08 2624
Size
31/2" x 31/2"
Finish
ST4C
Units of
Measure
Each
441
Class
RD758
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Residential Hinge
Accessories
BALL TIP
750
SOLID BRASS RESIDENTIAL HINGE KIT
• Tips add a decorative touch to residential door hinges.
• Tip kits easily installed for 31/2" (89 mm) or 4" (102 mm) hinges.
• Simply remove existing pin and replace with new pin and decorative tips.
• Kits include: 1
1
1
1
each, top and bottom tip,
31/2" (89 mm) long replacement pin,
1/2" (12.7 mm) long extension pin for 4" (102 mm),
drift pin to aid in removal of old pin
STEEPLE TIP
751
Class
CD750
EDP No.
80 0205
Tip Type
Ball
Finish
3
Pack Type
Carded
Units of
Measure
Packs
Pack Type
Bulk
Bulk
Bulk
Units of
Measure
Each
Each
Each
HINGE PIN
• For use with 741/758 residential hinges.
• Designed to keep pin from rising during use.
• Steel/Satin Brass finish.
EDP No.
08 2200
08 2210
08 2230
Size
3”
31/2”
4”
Finish
4
4
4
442
Class
741/758
741/758
741/758
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Spring Hinges
STANDARD WEIGHT SPRING HINGES
• Ideal for use in corridors, entrances and stairways.
• Automatically closes doors — an alternative
to overhead mounted door closers.
• Lifetime warranty against defects in material and workmanship.
• Patented ratchet adjustment eliminates need for
adjustment locking pin.
• Conforms to ANSI/BHMA Standard A156.17.
• Meets NFPA80 Standard for three-hour fire rated doors — minimum.
Two spring hinges per door required.
• UK fire approval for use on FD30 and FD60 doors.
• Use anti-friction hinges with spring hinges for best spring performance.
• UL-listed for doors up to 4' x 8' (1.22m x 1.22 m)
weighing up to 180 lbs. (82 kg.).
• Pivot point designed to align with CB
and FBB series anti-friction bearing hinges.
• Carded product packaged with hex wrench.
• Ratchet design allows for quick fine
tuning tension up or down with allen hex key.
• Bulk open (BO) packaging available for production prehangers.
Hinge
Size
31/2" x 31/2"
(89 x 89 mm)
For 13/8" (35 mm)
Door
OR
4" x 4"
(102 x 102 mm)
For 13/4" (45 mm)
Door
41/2" X 4"
(114 X 102 mm)
OR
41/2" X 41/2"
(114 X 114 mm)
For 13/4" (45 mm)
Door
SQUARE
2060R
Maximum
Door
Weight
Maximum
Door
Size
No. of
Spring Hinges
Recommended
No. of
Anti-Friction
Hinges
Recommended*
50 lbs.
(23 kgs.)
3' x 7'
1 ea.
2 ea.
(914 x 2134 mm)
85 lbs.
(39 kgs.)
2 ea.
1 ea.
(914 x 2134 mm)
110 lbs.
(50 kgs.)
3 ea.
_
(914 x 2134 mm)
50 lbs.
(36 kgs.)
1 ea.
2 ea.
(914 x 2286 mm)
130 lbs.
(59 kgs.)
2 ea.
1 ea.
(914 x 2286 mm)
180 lbs.
(82 kgs.)
3 ea.
_
(914 x 2286 mm)
180 lbs
(82 kgs.)
4 ea.
_
(1219 x 2438 mm)
3' x 7'
3' x 7'
3' x 7' 6"
3' x 7' 6"
3' x 7' 6"
4' x 8'
1/4" RADIUS
RD2060R
5 8
/"
RADIUS
RD2068R
443
* Also available with “Special Hole pattern” and combination Square & Radius
leaves for Insulated Doors.
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Spring Hinges
STANDARD WEIGHT SPRING HINGES
Class
2060-R
2060-R
2060-R
2060-R
2060-R
2060-R
2060-R
2060-R
2060-R
EDP No.
42 0742
42 0750
42 2106
42 2108
42 0923
42 0935
42 0936
42 0939
42 0940
Size
31/2" x 31/2"
31/2" x 31/2"
4" x 4"
4" x 4"
41/2" x 4"
41/2" x 41/2"
41/2" x 41/2"
41/2" x 41/2"
41/2" x 41/2"
Corner
Radius
Square
Square
Square
Square
Square
Square
Square
Square
Square
Finish
4
26D
26D
10A
26D
P
4
26D
3
Units of
Measure
Each
Each
Each
Each
Each
Each
Each
Each
Each
SQUARE
2060R
DOUBLE ACTING HINGE
• Double-acting hinge swings door in both directions.
• Fully adjustable spring tension returns door to opening.
• Commercial grade - ANSI/BHMA A156.17 Grade 3.
• Accepts doors 3/8" (9.5 mm) to 13/8" (35 mm) thick.
• Doors up to 30 lbs. (13.6 kg.) and 2' — 0" wide (609.6 mm) — two hinges.
• Doors up to 38 lbs. (17.2 kg.) and 2' — 8" wide (812.8 mm) — three hinges.
• Satin brass-finished hinge includes adjusting rod, stop pin and screws.
EDP No.
46 3040
Size
3"
Finish
4
Units of
Measure
Packs
444
Class
CD160
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Utility Hinges
WIDE UTILITY HINGE — REMOVABLE PIN
• Non-rising removable pin broad hinges are
for general utility use on lightweight doors.
• All sizes have five knuckles (hinges swaged for mortising).
• NH804 not swaged with no holes for weld-on applications.
• Nominal size applies to 804 hinges — NH804 hinge widths
are approximately 1/8" (3.2 mm) less than nominal size.
• NH: No hole non-swaged.
• BP: Removable brass pin.
Class
804
804
EDP No.
12 0550
12 1000
Size
3" x 3"
4" x 4"
Finish
2C
2C
Units of
Measure
Each
Each
BROAD HINGE — NON-REMOVABLE PIN
• Fast spun pin broad hinge is for general utility use
on lightweight doors.
• All sizes have five knuckles.
• 808 hinges swaged for mortising.
• Nominal size applies to 808 hinges.
Class
808
808
808
EDP No.
12 3300
12 3950
12 4500
Size
2" x 2"
3" x 3"
4" x 4"
Finish
2C
2C
2C
Units of
Measure
Each
Each
Each
NARROW UTILITY HINGE — NON-REMOVABLE PIN
• Fast spun pin narrow hinge for general utility use on lightweight doors.
• Size 2" (50.8 mm) and larger have five knuckles —
smaller sizes have three.
• 838 hinges swaged for mortising.
Class
838
EDP No.
11 3500
Size
2"
Finish
2C
Units of
Measure
Each
NARROW UTILITY HINGE — REMOVABLE PIN
• Removable pin narrow hinge for general utility
use on lightweight doors.
• Size 2" and larger have five knuckles – smaller sizes have three.
• Hinges swaged for mortising.
• Furnished on order, at additional cost, not swaged with no holes
for weld-on applications.
EDP No.
75 1576
Size
11/2"
Finish
2C
Units of
Measure
Packs
445
Class
CD840
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Door Stops
SPRING DOORSTOP
•
•
•
•
Flexible design for safety and ease of cleaning.
Decorative, extra-heavy spring helps prevent wall damage.
Base plate detaches from spring to simplify installation.
Base material: Steel.
Class
EDP No. Height
SP7092 75 6262 213/16"
Finish
26
Pack Type
Carded
Units of
Measure
Packs
HINGE PIN DOORSTOP
•
•
•
•
•
•
Doorstop is held in place by hinge pin.
Helps prevent damage to wall.
Adjustable to stop door at any angle.
Large self-adjusting pad makes full contact with door.
Oversize bumper mounted on adjusting screw protects door trim.
Base material: Zinc die cast.
Units of
Class
EDP No.
Finish
Pack Type
Measure
CD7090
76 6310
3
Carded
Packs
CD7090
76 6327
26
Carded
Packs
CD7090
76 6334
15
Carded
Packs
HINGE PIN DOORSTOP
•
•
•
•
•
Doorstop is held in place by hinge pin.
Helps prevent damage to wall.
Adjustable to stop door at any angle.
Self-adjusting pad makes full contact with door.
EDP No.
57 1030
57 1050
Finish
3
3
Pack Type
Polybag
Polybag
Units of
Measure
Packs
Packs
446
Class
DP57–1030
DP57–1050
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Handrail Brackets/Door Trim
HANDRAIL BRACKET
• Supports wooden handrails at any angle of stairway.
• Strong design for added durability.
• Base material: Aluminum.
Class
CD7081
EDP No.
75 6055
Projection
3"
Finish
3
Units of
Measure
Packs
Pack Type
Carded
HEAVY-DUTY HANDRAIL BRACKET
• Especially designed to support heavy railings.
• Base material: Zinc die cast.
Class
SP7094
EDP No.
75 6052
Projection
35/16"
Finish
3
Units of
Measure
Packs
Pack Type
Polybag
HANDRAIL BRACKET
• Base material: Zinc die cast.
Class
DP57-1050
q
EDP No.
57 1050
q
Projection
3"
q
Finish
3
q
Pack Type
Polybag
Units of
Measure
Packs
ROUND CORNER FLUSH BOLT
• For use in securing the inactive leaf of double doors.
• For added security, use bolts at top and bottom of door.
• Base material: Steel.
Class
SP394
EDP No.
18 5368
Projection
6"
Finish
4
Pack Type
Polybag
Units of
Measure
Packs
DECORATIVE LOCKSET FOR WOOD DOOR
For use on doors 7/8" (22 mm) to 13/8" (35 mm) thick.
Round knob outside with convenient lever-action handle inside.
Features an interior locking mechanism for added security.
Furnished complete with installation hardware and solid strike plate.
Polished brass finish enhances existing door trim hardware.
Polished brass finish has limited lifetime warranty.
Base material: Solid Brass/Steel.
Class
CD1770
EDP No.
11 0584
Finish
3
Pack Type
Carded
Units of
Measure
Packs
447
•
•
•
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Cabinet Hardware
DOUBLE MAGNETIC CABINET CATCH
• For pairs of cabinet doors or full-size doors.
• Floating action magnet and pole piece assemblies
pivot to allow for full contact with strikes.
• Impregnated magnet withstands rugged use.
• Slotted screw holes in case and off-center
hole in strike assure perfect installation.
• Case size: 31/4" x 13/8" (82.6 mm x 35 mm),
Strike size: 11/8" x 11/16" (28.6 mm x 27 mm).
Class
SP45
EDP No.
81 0190
Finish
AL
Pack Type
Polybag
Units of
Measure
Packs
INTERLEAF CASEWORK HINGE
•
•
•
•
•
Made of heavy-gauge steel.
For 3/4" (19 mm) thick overlay cabinet or wardrobe doors.
Has interleaf design for close door fit.
Available with hospital tips — prefix “HT” to class number.
Has elongated screw holes for easy alignment, both vertically
and laterally.
Units of
Class
EDP No.
Finish
Pack Type
Measure
1592-4
35 1490
23/4"
26D
Packs (2/PK.)
SOLID BRASS CABINET PULL
• For cabinet doors or drawers up to 3/4" (19 mm) thick.
• Made of solid brass.
• Referred to as “Ribbon Pulls”.
Class
4477
EDP No.
34 5840
Size
4"
Finish
26D
Units of
Measure
Each
CABINET PULL
448
•
•
•
•
•
•
•
For cabinet doors or drawers.
Made of solid brass, in popular finishes or in solid aluminum.
1" (25.4 mm) finger clearance on all items. Projects 15/16" (33.2 mm).
Referred to as “wire” pulls.
Very acceptable as pulls for bifold doors.
Can be used on slide doors when bumper stops are employed.
Diameter is 5/16" (7.9 mm).
Units of
Class
EDP No.
Finish
Pack Type
Measure
4483
34 8225
31/2"
10B
Each
4484
34 8305
4"
10B
Each
4484
34 8315
4"
26D
Each
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Hobby/Craft Hardware
Supports/Braces
Hooks
CHEST HANDLE
• Surface mounted chest handle is for use on chests, crates
and storage boxes.
• Vertical corrugations reinforce the stop.
• Heavy steel handle with large bail allows for a firm, comfortable grip.
• Screws can be driven on all sizes without raising bail.
Class
SP1205
SP1205
EDP No.
33 1301
33 3380
Size
No. 23/4
No. 31/2
Wire
Dia.
1/4"
11/32"
Plate Size
Finish
211/16" x 2"
2C
35/8" x 215/16"
2C
Pack Type
Polybag
Polybag
Units of
Measure
Packs
Packs
CHEST LATCH
• Use to securely latch trunks, chest and cases.
• Steel construction for added strength.
• Attractive bright brass finish.
Class
CD5365
EDP No.
80 1700
Size
211/16" x 11/2"
Finish
3
Pack Type
Carded
Units of
Measure
Packs
FOLDING TABLE LEG BRACE
• Brace can be used on folding legs of tables.
• Positive locking feature is easily operated.
• Legs are braced in open position —
lay flat against table in closed position.
• Right hand or left hand identified on brace leg.
• Set includes one right-hand and one left-hand brace, with screws.
Class
4461/4
EDP No.
49 6080
Size
131/2" x 5/8"
Units of
Measure
Set
Finish
2C
MINI COAT & HAT HOOK
Generously formed with no sharp or protruding parts.
Can be used to hang lightweight coats, hats and towels.
Upper hook projection: 11/2”
Class
EDP No.
CD7084 75 8440
Overall Height
13/4"
Finish
3
Pack Type
Carded
Units of
Measure
2 Pack
449
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Gate T-Hinges
DECORATIVE LIFESPAN® T-HINGE
•
•
•
•
Limited lifetime guarantee.
Durable black finish complements decorative scalloped design.
Ideal for use on ornamental gates and mini barns.
Exclusive bearing design eliminates metal-to-metal contact
to reduce wear.
• Supplied with black pan head screws.
Class
SP909
SP909
SP909
EDP No.
15 6450
15 6470
15 6490
Strap
Length Size
4"
6"
8"
Units of
Pack Type
Polybag
Polybag
Polybag
Finish
1D
1D
1D
Measure
Packs
Packs
Packs
LIFESPAN® HEAVY T-HINGE
•
•
•
•
Exclusive bearing design eliminates metal to metal contact.
Reduces wear and increases life expectancy by up to 500%.
Bearings provide for smooth, quiet operation and remain
dimensionally and structurally sound in hot and cold climates.
• Exceeds strength requirements of ANSI/BHMA A156.20-2989.
• All metal parts are plated prior to assembly to enhance rust resistance.
Class
908
908
908
908
EDP No.
14 5600
14 4920
14 5020
14 5160
Strap
Length
Size
2"
5"
6"
8"
Strap
Width
at Joint
19/16"
13/4"
23/32"
211/16"
Pad
Length
35/32"
39/16"
41/4"
51/2"
Pad
Width
11/4"
117/32"
113/16"
29/32"
Pad
Size
35/32" x 11/4"
35/16" x 117/32"
41/4" x 113/16"
51/2" x 29/32"
Strap
Size
4" x 19/16"
5" x 13/4"
6" x 23/32"
8" x 211/16"
Finish
2C
2C
2C
2C
Units of
Measure
Each
Each
Each
Each
LIGHT T-HINGE
450
• Light-duty tee hinges are ideal for use on
tool boxes, storage chests and small shed doors.
• Can be used in exterior or interior applications.
• Available in plain steel, bright zinc or Weathergard™
galvanized finish with Brass pin (CD904BP).
Class
CD904
CD904
CD904
EDP No.
75 3900
75 4420
75 4446
Strap
Length
Size
4"
4"
6"
Strap
Width
at Joint
7/8"
13/16"
117/32"
Pad
Length
113/16"
27/16"
35/32"
Pad
Width
21/32"
7/8"
11/16"
Pad
Size
113/16" x 21/32"
27/16" x 7/8"
35/32" x 11/16"
Strap
Size
2" x 7/8"
4" x 13/16"
6" x 117/32"
Finish
2C
2C
2C
Units of
Measure
Packs (2/Pk.)
Packs (2/Pk.)
Packs (2/Pk.)
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Gate Latches
GATE LATCH BOLT
•
•
•
•
•
Slide action bolt is for use on flush-mounted gates and doors.
Can be used in outswinging or inswinging applications.
Made of heavy-gauge steel for long wearing service.
Padlockable for greater security.
Square holes in base accommodate 1/4" (6.4 mm)
carriage bolts to help prevent unauthorized access.
• 5/16" (7.9 mm) bolt diameter, bolt throw 23/32" (53.2 mm).
• Base length x width 315/16" x 21/4" (100 mm x 57.2 mm)
Class
CD1271
EDP No.
76 0815
Bolt Length
63/16"
Finish
1D
Pack Type
Carded
Units of
Measure
Packs
CANE BOLT
Can be used to lock gates or to hold gates open in position.
Gravity action bolt has a maximum throw of 23/4".
Bolt is storable in the raised position.
Mounting brackets “capture” bolt to prevent removal following
installation.
Class
SP1009
EDP No.
53 2511
Bolt Length
12"
Finish
2C
Pack Type
Polybag
Units of
Measure
Packs
451
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Shutter, Blinds and Corner Braces
BLIND HINGES WITH OFFSETS
• For use to hang blinds or shutters flush with casing
in both brick and frame construction.
• Use SP1640 in frame construction, SP1644 in brick construction.
• One boxed set is required for each individual blind.
• Set includes two hook assemblies, one LH strap hinge,
one RH strap hinge, and 14 - 8 x 1 flat head wood screws.
• Bright zinc plated to resist rust.
• Hinge size 43/16" x 1" (106.4 mm x 25.4 mm),
throw 2" x 41/8" (50.8 mm x 104.8 mm).
Class
SP1640
SP1644
EDP No.
39 2403
39 2684
Size
43/16" x 1"
43/16" x 1"
Offset
11/16" Offset
21/8" Offset
Finish
ST2H
ST2H
Pack Type
Polybag
Polybag
Units of
Measure
Packs
Packs
BLIND HOLDBACK WITH SPRING
• For use as a blind or shutter holdback.
• Includes non-rattling spring.
• Attractive design and black finish complement a variety of exterior styles.
Units of
Class
SP1685-1/2
EDP No.
39 7360
Size
63/4"
Offset
KJ1
Finish
Polybag
Non-ferrous
non-rattling spring
Measure
Packs (2/Pk.)
Application of non-rattling
spring which requires a
minimum space of 13/8" between
house and blind (No. 1685-1/2).
CORNER BRACE
• Reinforces right-angle corner joints.
• Screw holes are staggered in 5" (127 mm) and larger.
• Available in bright zinc, satin brass tone
or Weathergard™ galvanized finish.
• T997 UPC tagged.
EDP No.
30 3000
30 3320
Size
(Side Length)
1"
2"
Finish
2C
2C
Units of
Measure
Each
Each
452
Class
997
997
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Safety Hasps
ADJUSTABLE STAPLE SAFETY HASP
•
•
•
•
•
•
•
Adjustable staple compensates for shrinking or sagging of door.
Padlock lays flat when staple is in a vertical position.
Screws are concealed with hasp in latched position.
Available in plain steel, bright zinc or Weathergard™ galvanized finsh.
Pad length: 115/32"
Staple projection: 11/16"; 17/16" projection for 71/2" leaf length.
Staple plate: 113/16" x 11/2"
Class
CD915
CD915
CD915BP
SP915
EDP No.
75 4940
75 5070
75 5075
81 1810
Leaf
Length
31/2"
41/2"
41/2"
41/2"
Accepts
Shackle
7/16"
7/16"
7/16"
7/16"
Finish
2C
2C
ST2H
2C
Leaf/Pad
Width
Pack Type
11/2"
Carded
11/2"
Carded
11/2"
Carded
11/2"
Polybag
Units of
Measure
Packs
Packs
Packs
Packs
LIGHT DUTY SAFETY HASPS
• Attractive satin brass tone finished hasp is ideal for use on boxes,
chests and cabinets.
• Screws are concealed in latched position.
• Padlockable for added security.
Class
CD346
EDP No.
75 0910
Leaf
Length
21/2"
Accepts
Shackle
9/32"
Finish
ST4C
Leaf/Pad
Width
Pack Type
1"
Carded
Units of
Measure
Packs
FIXED STAPLE HINGE HASP
• Ideal for use in applications with a 90° corner.
• Can be padlocked for increased security.
• Available in plain steel ro bright zinc plated.
EDP No.
51 3050
Strap
Length
6"
Finish
PS
Strap
Width
11/16"
Units of
Pack Type Measure
Bulk
Each
453
Class
912
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Safety Hasps
ROTATING POST SAFETY HASP
• Rotating post allows padlock to hang straight whether
hasp is mounted in horizontal or vertical position.
• Rotation also helps prevent forced entry
by twisting off post with steel rod or pry bar.
• LifeSpan® Corrugated leaf has up to twice the
strength of conventional flat-leaf hasps.
• Leaf's hold-open feature eliminates unwanted
swinging to limit possible damage to door and frame.
• Exclusive full-width knuckle design and supporting side walls reduce sag.
• All components parts are plated prior to assembly to enhance rust resistance.
Class
911
SP911
SP911
SP911
SP911
EDP No.
51 1650
81 1700
81 1710
81 1720
81 1740
Leaf
Length x Width
41/2" x 11/2"
21/2" x 1"
31/2" x 11/2"
41/2" x 11/2"
6" x 2"
Accepts Shackle
Dia. up to
7/8"
5/16"
7/8"
7/8"
13/32"
Finish
2C
2C
2C
2C
2C
Pack Type
Bulk
Polybag
Polybag
Polybag
Polybag
Units of
Measure
Each
Packs
Packs
Packs
Packs
LATCHING POST SAFETY HASP
• Serves as a latch with added security provided by use of a padlock.
• Post rotates to help prevent forced entry
by twisting off post with steel rod or pry bar.
• LifeSpan® Corrugated leaf has up to twice
the strength of conventional flat-leaf hasps.
• Hold-open feature eliminates uncontrolled swinging of leaf.
• Exclusive full-width knuckle design and supporting side walls reduce sag.
• All components are plated prior to assembly to enhance rust resistance.
• Accepts shackle diameter up to 3/8" (9.5 mm).
• Pad length x width: 15/32" x 111/16" (11.9 mm x 42.9 mm).
• Post Base: 19/16" x 19/16" (39.7 mm x 39.7 mm).
• Post Projection: 25/32" (19.8 mm).
Class
CD917
SP917
EDP No.
75 5200
81 1900
Leaf
Length x Width
31/2" x 11/2"
31/2" x 11/2"
Finish
2C
2C
Pack Type
Carded
Polybag
Units of
Measure
Packs
Packs
Finish
2C
Pack Type
Bulk
Units of
Measure
Each
FIXED STAPLE HEAVY DUTY HINGE HASP
454
• For doors, chests and lockers.
• Heavy duty for added security.
• Rust resistant.
Class
941
EDP No.
51 7600
Leaf
Length x Width
71/2"
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Bolts
CHAIN BOLTS
• For use on cabinet, double-screen, garage and industrial doors.
• Can be used on doors opening in by reversing the square bolt.
• Equipped with a strong hard-drawn wire spring which
throws the bolt automatically when chain is released.
• Full 24" (609.6 mm) long chain.
• Includes surface and angle strike.
Class
CD1055
CD1055
SP1055
SP1055
SP1055
EDP No.
75 7030
75 7033
81 2500
81 2520
81 2550
Bolt Length
4"
4"
3"
4"
6"
Bolt Size
7/16"
7/16"
3/8"
7/16"
9/16"
Finish
4
2C
2C
2C
2C
Pack Type
Carded
Carded
Polybag
Polybag
Polybag
Units of
Measure
Packs
Packs
Packs
Packs
Packs
FOOT BOLTS
•
•
•
•
For use on cabinet, double-screen, garage and industrial doors.
Operated by pressure of the foot on the cap.
Released by pressure on the tip.
When released, the bolt is retracted by a strong hard-drawn wire spring.
Class
SP1056
SP1056
EDP No.
81 2620
81 2650
Bolt Length
4"
6"
Bolt Size
19/32"
3/4"
Finish
2C
2C
Pack Type
Polybag
Polybag
Units of
Measure
Packs
Packs
Finish
2C
2C
2C
2C
Pack Type
Bulk
Bulk
Carded
Carded
Units of
Measure
Each
Each
Packs
Packs
BARREL BOLTS
Ideal for use on doors, gates and cabinets.
Overlong bolt throw for added security.
Reversible — strike engages at either end of bolt.
Complete with surface strike — mounts easily.
5/16" (7.9 mm) bolt diameter, 9/16" x 17/16"
(14.3 mm x 36.5 mm) bolt strike.
Class
1078
1078
CD1078
CD1078
EDP No.
22 5215
22 5615
75 7820
75 8345
Bolt Length
4"
6"
21/2"
6"
Bolt Bracket
31/32" x 17/16"
423/32" x 17/16"
125/32" x 17/16"
423/32" x 17/16"
455
•
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Strap Hinges/Wire Goods
LIFESPAN® HEAVY-STRAP HINGE
•
•
•
•
Exclusive bearing design eliminates metal to metal contact.
Reduces wear and increased life expectancy by up to 500%.
Bearings provide for smooth, quiet operation and remain
dimensionally and structurally sound in hot and cold climates.
• Exceeds strength requirements of ANSI/BHMA A156.20-1989.
• All metal parts are plated prior to assembly to enhance rust resistance.
• 902BP Weathergard™ galvanized finish with Brass pin.
Class
902
902
902
902
902
SP902BP
EDP No.
14 1270
14 1370
14 1500
14 1620
14 1720
17 1170 700
Size
(Strap Length)
4"
5"
6"
8"
10"
6"
Joint Length
115/32"
13/4"
25/16"
231/32"
33/8"
25/16""
Finish
2C
2C
2C
2C
2C
ST2H
Units of
Measure
Each
Each
Each
Each
Each
Packs
Finish
2C
2C
2C
2C
Units of
Measure
Each
Each
Each
Packs
LIGHT STRAP HINGE
• Light-duty strap hinges are ideal for use on tool boxes,
storage chests and small shed doors.
• Can be used in exterior or interior applications.
• Available in plain steel, bright zinc or Weathergard™
galvanized finish with Brass pin.
EDP No.
14 0150
14 0300
14 0450
75 3250
Size
(Strap Length)
2"
3"
4"
3"
Joint Length
1"
3
1 /32"
13/16"
13/32"
456
Class
900
900
900
CD900
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Screen/Storm
Accessories
SCREEN DOOR SET WITH FULL SURFACE HINGE
• Complete kit for hanging lightweight screen and storm doors.
• Set consists of: one pair of spring hinges (no. 158) – 23/4" x 29/16",
one 47/8" door pull (no. 479), one 2” hook and eye (no. 8440)
and screws.
Class
CD1158
EDP No.
74 5690
Size
3
2 /4" x 29/16"
Units of
Measure
Packs
Finish
2C
SASH HANGER SET
• Sets consists of two hangers (no. 1724), one 11/2" hook and eye
(no. 8440) and screws.
• For screen or storm sash hung flush with casing.
• Hanger eye – 2" x 17/8"; Hanger hook – 17/8" x 3/4"
Class
CD1734
EDP No.
74 8000
Finish
2C
Units of
Measure
Packs
Pack Type
Carded
TRANSOM CATCH
• Ideal for use on transom windows.
• Catch can be operated with a window pole.
• Strong steel spring for positive engagement.
Class
SP1165
EDP No.
23 7560
Size
2" x 15/8"
Finish
2C
Pack Type
Polybag
Units of
Measure
Each (1/Pk.)
DOOR PULL
• Ideal for use on screen or storm door pull.
• Rounded contour provides maximum handling comfort and appearance.
• Available in many finishes including ST2H Weathergard™ galvanized finish.
EDP No.
75 1180
Size
47/8"
Finish
2C
Pack Type
Carded
Units of
Measure
Packs
457
Class
CD479
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Storage Closet
Garage Accessories
ADJUSTABLE ROUND CLOSET RODS
• An ideal, sturdy rod for closets.
• PermaSeam™ design consists of two structurally strong rolled
shapes which telescope for easy adjustment.
• Closet rods exceed ANSI/BHMA A156.16 Deflection Standards
when installed with center support(s).
Class
V7052
V7052
EDP No.
19 3028
19 3038
Size
30" - 48"
48" - 72"
Finish
White
White
Pack Type
V-Pack
V-Pack
Units of
Measure
Packs
Packs
HEAVY-DUTY SHELF AND CLOSET ROD SUPPORT
• Ideal for supporting shelves and closet rods
where hook strip is not installed.
• For closet rods up to 13/8" (35 mm) in diameter.
• Convenient one-piece construction.
EDP No.
19 0300
Size
White
Units of
Measure
Each
458
Class
7046
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Box Track
BOX TRACK SINGLE STRAIGHT SLIDING DOORS
(Up to 450 lbs. each door)
Hardware listed for various installations is not packed in sets.
Each item must be ordered separately.
Class
Number
XY2641
3 8
/ " X 2"
1231
2550
484 or 488
25591/2 or 2560
915 - 71/2"
Number of Doors, Opening Size and Quantity of Hardware Required
1 Door
1 Door
1 Door
2 Bi-Parting 2 Bi-Parting
Description
8' Opening
10' Opening
12' Opening 8' Opening
10' Opening
Track
2 Pcs. 8'
2 Pcs. 10'
2 Pcs. 12'
2 Pcs. 8'
2 Pcs. 10’
LAG Screws for Bracket 10 Only
12 Only
14 Only
10 Only
12 Only
Door Stop
2 Only
2 Only
2 Only
2 Only
2 Only
Floor Guide
...
...
...
1 Set
1 Set
Pull
1 Only
1 Only
1 Only
2 Only
2 Only
Stay Roller
1 Only
1 Only
1 Only
2 Only
2 Only
Security Hasp (Optional) 1 Only
1 Only
1 Only
2 Only
2 Only
2 Bi-Parting
12' Opening
2 Pcs. 12'
14 Only
2 Only
1 Set
2 Only
2 Only
2 Only
BOX TRACK BY-PASSING SLIDING DOORS
(Up to 450 lbs. each, with track for each door)
2 By-Passing Doors
2 By-Passing Doors
Description
8' Opening
16' Opening
Track
2 Pcs. 8'
4 Pcs. 8'
Double Bracket
5 Only
9 Only
Lag Screws for Brackets
10 Only
18 Only
Hanger
2 Pair
2 Pair
Door Stop
2 Only
2 Only
Flush Pull*
2 Only
2 Only
Class
Number
XY2641
XY2651-D
3 8
/ " X 2"
XY2650
1231
*Not Offered by STANLEY.
BOX TROLLEY TRACK (450 LBS.)
• Designed for doors up to 450 lbs. (204.5 kg).
• For use with XY Series hangers and brackets.
• Base Material: Steel.
EDP No.
41 4530
41 4540
41 4580
41 4590
Size
6'
8'
10'
12'
Finish
2H
2H
2H
2H
Units of
Measure
Each
Each
Each
Each
459
Class
XY2641
XY2641
XY2641
XY2641
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Box Track
BOX TRACK DOUBLE SIDE-MOUNT BRACKET (450 LBS.)
• For use with XY2641 track.
• Features “hold-fast” clamping, consists of a clamping plate w/bolt and nut which fits into the
track bracket, tightening of the nut causes ends of clamping plate to press down on the track
insuring a rigid, perfectly aligned surface for the trolley wheels.
• 2' (609.6 mm) on centers and at all track joints.
Class
XY2651-D
EDP No.
41 5460
Base
Material
Steel
Finish
2C
Pack type
Polybag
Units of
Measure
Each
BOX TRACK HANGER WITHOUT APRON (300 LBS.)
•
•
•
•
Will accommodate loads up to 300 lbs. (136 kg) (150 lbs. per hanger).
For use with XY2641 track.
Equipped with ball bearings in the wheels.
Vertical adjustment can be set in any position.
Class
BBXYT2600-1/2
EDP No.
41 1920
Base
Material
Steel
Finish
2H
Pack Type
Polybag
Units of
Measure
Pack
BOX TRACK HANGER AND BRACKET SET (450 LBS.)
• For use with XY2641 track (must be ordered separately).
• Will accommodate loads up to 450 lbs. (204.5 kg)
(225 lbs. per hanger).
• Hangers supplied complete with carriage bolts and hex nuts.
• Set consists of: 2 Hangers (XY2650)
4 Single Track Side
Mount Brackets (XY2650-C)
(includes bolts and lag screws)
2 End caps (XY2641 - EC)
EDP No.
41 1020
Base
Material
Steel
Finish
2C
Units of
Measure
Set
460
Class
SXY2650
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Box Track
BOX TRACK HANGER (450 LBS.)
• Designed for single or by-passing sliding doors
between 11/2" (38 mm) — 2" thick (50.8 mm).
• Will accommodate loads up to 450 lbs. (204.5 Kg) (225 lbs. per hanger).
• Features DELRIN® acetal resin 500AF bearings
which provide for smooth operation and long life.
• BBXY equipped with ball bearings in the wheels for high frequency use.
• Slot on top of 1 piece apron allows for lateral adjustment.
• Locking and adjusting nuts allows door to be adjusted
vertically while weight of door is on hanger.
• Each hanger supplied complete with carriage bolts and hex nuts.
Class
XY2650
BBXY2650
EDP No.
41 1000
41 1001
Base
Material
Steel
Steel
Finish
2C
2C
Pack Type
Polybag
Polybag
Units of
Measure
Pack
Pack
BOX TRACK HINGED HANGER (450 LBS.)
• Designed for single or by-passing sliding doors
between 11/2" (38 mm) — 2" thick (50.8 mm).
• Will accommodate loads up to 450 lbs. (204.5 kg) (225 lbs. per hanger).
• Aprons are hinged, allowing a “swing-out” feature.
• Equipped with ball bearings in the wheels for high-frequency use.
• Supplied complete with flat head machine screws,
carriage bolts and hex nuts.
EDP No.
41 1004
Size
Steel
Finish
2C
Pack Type
Polybag
Units of
Measure
Pack
461
Class
BBXY2650-1/2
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Box Track
BOX RAIL HANGER
• Use on wood-frame sliding doors from 11/2" to 2" thick.
• Packed with two end caps and bolts for attaching door strap.
• Rigid with single door strap.
Class
5005
5080
5051
EDP No.
S112-102
N182-568
N181-461
Base
Material
Steel
Steel
Units of
Measure
Pair
Pair
Finish
Zinc
Zinc
SINGLE BOX RAIL BRACKET
• Use as a support bracket for National’s #5114 and #5116 box rail.
Class
DP51FBC
EDP No.
S104-349
Base
Material
Steel
Units of
Measure
Each
Finish
Galvanize
BOX RAIL BRACKET
• Use to join two pieces of National’s #5114 and #5116 box rail.
Class
DP51HSBC
EDP No.
S104-471
Base
Material
Steel
Units of
Measure
Each
Finish
Galvanize
BOX RAIL
• Use on doors weighing up to 450 lb.
• Used with many types of single and multiple brackets.
EDP No.
S105-676
N307-165
Length
6’
8’
Base
Material
Steel
Steel
Finish
Galvanize
Galvanize
Units of
Measure
Each
Each
462
Class
5516
5116
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Round Track
ROUND TRACK SINGLE STRAIGHT SLIDING DOORS
(Up to 600 lbs. each door)
Hardware listed for various installations is not packed in sets.
Each item must be ordered separately.
Class
Number
R2641
R2610-SC
1 4
/ " X 2"
1231, 1237
2550
484 or 488
2559-1/2
or 2560
915-71/2"
Description
Track
Splice Collar
Lag Screws
for Bracket
Door Stop
Floor Guide
Pull
Stay Roller
Security Hasp
(Optional)
1 Door
1 Door
1 Door
2 Bi-Parting
2 Bi-Parting
8' Opening
10' Opening
12' Opening
8' Opening
10' Opening
2 Pcs. 8'
2 Pcs. 10'
2 Pcs. 12'
2 Pcs. 8'
2 Pcs. 10'
1 Only
1 Only
1 Only
1 Only
1 Only
9 Only
11 Only
13 Only
9 Only
11 Only
2 Bi-Parting
12' Opening
2 Pcs. 12'
1 Only
13 Only
2 Only
...
1 Only
1 Only
2 Only
...
1 Only
1 Only
2 Only
...
1 Only
1 Only
2 Only
1 Set
2 Only
2 Only
2 Only
1 Set
2 Only
2 Only
2 Only
1 Set
2 Only
2 Only
1 Only
1 Only
1 Only
2 Only
2 Only
2 Only
ROUND TRACK BY-PASSING SLIDING DOORS
(Up to 600 lbs. each, with track for each door)
2 By-Passing Doors
2 By-Passing Doors
Description
8' Opening
16' Opening
Track
2 Pcs. 8'
4 Pcs. 8'
Double Brackets
4 Only
9 Only
Lag Screws for Brackets
8 Only
18 Only
Splice Collar
2 Only
2 Only
Door Stop
2 Only
2 Only
Floor Guide
1 Set
1 Set
Flush Pull*
2 Only
2 Only
Class
Number
R2641
R2610-D
3 8
/ " X 2"
R2610-SC
1231, 1237
2551
*Not Offered by STANLEY.
SLOTTED ROUND TROLLEY TRACK (600 LBS.)
Designed for doors up to 600 lbs. (272.7 kg).
For use with R SERIES hangers and brackets.
Round, self-cleaning design enhances trolley performance.
Track is slotted on top to accept mounting brackets.
Base Material: Steel.
Class
R2641
R2641
R2641
EDP No.
41 1021
41 1022
41 1023
Size
8'
10'
12'
Units of
Measure
Each
Each
Each
Finish
2H
2H
2H
463
•
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Round Track
Round Track Hanger (600 lbs.) FOR R SERIES
• Designed for single or by-passing sliding doors between
11/2" (38 mm) — 2" (50.8 mm) thick.
• Will accommodate loads up to 600 lbs. (272.7 kg) (300 lbs. per hanger).
• Equipped with DELRIN® acetal resin 500AF bearings.
• Slot on top of one-pc. apron allows for lateral adjustment.
• Locking and adjusting nuts allows door to be adjusted while weight of door is on hanger.
• Each hanger supplied complete with carriage bolts and hex nuts.
Class
R2640
EDP No.
41 1031
Base
Material
Steel
Finish
2C
Units of
Measure
Pack
Pack Type
Polybag
ROUND RAIL HANGERS
• Use on wood-frame sliding door.
• Fexible trunnion design resists door damage.
• Delrin® wheels are quite and smooth rolling.
• Interchangeable with other brands of round rail.
Class
5330
EDP No.
N193-730
Base
Material
Steel
Finish
Zinc
Units of
Measure
Pair
ROUND TRACK SPLICE COLLAR (600 LBS.)
• Designed for use with R SERIES track.
• Used to connect two pieces of track together.
Base
Class
EDP No.
Material
Finish
R2610-SC
41 1027
Steel
2H
464
Units of
Measure
Each
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Round Track
ROUND TRACK DOUBLE SIDE MOUNT BRACKET (600 LBS.)
• For use with R SERIES slotted track.
• Designed to accommodate two runs of track.
• Recommended Spacing: 2' (609.6 mm) on centers at all track joints.
Class
R2610-D
Base
Material
Steel
EDP No.
41 1026
Finish
2H
Units of
Measure
Each
PLAIN ROUND RAIL WITH 24" OC BRACKETS
• For doors weighing up to 600 lb per panel.
• Can be used with various types of single and multiple brackets.
Class
5400
5400
5400
EDP No.
N193-789
N193-771
N193-763
Length
12’
10’
8’
Base
Material
Steel
Steel
Steel
Units of
Measure
Each
Each
Each
Finish
Galvanized
Galvanized
Galvanized
ROUND RAIL SPLICE COLLAR
• Use with National’s #5430, #5433, #5460 and #5465 Trackmaster™ round rail.
• Unique collar design supports the end of two rails while not interfering with flat
mounting surface of rail.
• Fasteners are not required.
• Can be installed after rail is mounted to building.
• Rail bracket spacing holds collar in place.
Class
DP5405BC
EDP No.
N193-847
Base
Material
Steel
Finish
Galvanized
Units of
Measure
Each
ROUND RAIL BRACKET
• Use with National’s #5400 Trackmaster™ round rail at 2’ intervals to mount rail to
side of building.
• Suitable for use on corrugated siding due to narrow surface.
EDP No.
N193-888
Base
Material
Steel
Finish
Galvanized
Units of
Measure
Each
465
Class
5412BC
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Accessories
SINGLE-DOOR FLOOR GUIDE
• Heavy-duty steel construction.
• Supplied complete with lag screws and expansion shields.
Class
SP2550
Base
Material
Steel
EDP No.
41 1221
Finish
2C
Pack Type
Polybag
Units of
Measure
Pack
STAY ROLLER
• Reversible and adjustable for sliding doors up to 23/4" (69.9 mm) thickness.
• Supplied complete with flat head wood screws.
Class
SP2559 1/2
EDP No.
41 1801
Size
Steel
Finish
2C
Pack Type
Polybag
Units of
Measure
Pack
HEAVY DUTY STAY ROLLER
• Heavy-duty construction for doors 1" — 33/4"
(25.4 mm x 95.3 mm) thickness.
• Fully adjustable and reversible.
• Supplied complete with pan head wood screws.
Class
SP2560
EDP No.
41 1008
Base
Material
Steel
Finish
2C
Pack Type
Polybag
Units of
Measure
Pack
DOORSTOP
• Steel/Zinc plated.
• Ideal as a doorstop for sliding doors or securing garage
and/or shed doors.
•Accommodates doors up to 2” in thickness.
EDP No.
57 5401
Size
41/4" x 41/4"
Finish
2C
Pack Type
Bulk
Units of
Measure
Each
466
Class
1231
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
Accessories
EXTRA-HEAVY PIVOT
•
•
•
•
•
•
•
•
•
•
•
•
For doors up to 150 lbs. (68 kg).
For overlay doors 13/8" (35 mm) to 13/4" (44 mm) thick.
Ideal for wardrobe doors.
Bearings take both vertical and lateral loads.
Designed for mullion or frame mounting.
Doors can be installed floor to ceiling.
Made from extra heavy .200" (5 mm) gauge steel.
Extra long screws for firm attachment
Screw holes allow both vertical and horizontal adjustment.
Full 180º opening.
Pivot edges are finely polished.
Set is non-handed.
Class
327
EDP No.
35 0043
Finish
26D
Pack Type
Bulk
Unit of
Measure
1 Set
DOOR PULL
•
•
•
•
Ideal for use on screen, shed and barn doors.
Comfort and appearance is enhanced by rounded contour of handle.
NH482 comes without holes and flattened ends for welding.
Grip length: No.1 — 311/32", No.2 — 4", No.3 — 41/2", No.4 — 55/16"
Class
CD482
SP482
SP482
EDP No.
75 1310
81 0560
81 0565
Size
No. 2 53/4" x 11/2"
No. 3 61/2" x 13/4"
No. 3 61/2" x 13/4"
Finish
2C
2C
1D
Pack Type
Carded
Polybag
Polybag
Units of
Measure
Pack
Pack
Pack
TRAP DOOR RING
Mortised design for flush installation with flooring.
Bail stores flush with mounting plate.
Helps minimize danger of tripping.
Ideal for use on chests, crates and storage boxes.
Class
1215
EDP No.
57 4800
Size
3" x 31/2"
Finish
2C
Units of
Measure
Each
467
•
•
•
•
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]
468
Note:
Southwest – Texas
800-233-4210
800-211-4607
866-693-6903
800-722-4210
Fax 800-854-4146
Fax 800-211-4608
Fax 866-693-6904
Fax 800-248-3620
www.topnotchinc.com
West – Nevada
[email protected]

Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

Transcription

Similar documents

Hajoca Corporation

FIRST CORP INTERNATIONAL, INC CREDIT APPLICATION

Scanned Document

SPECIALTY GLASS - OBSCURE glaztech.com - Glaz

Cellofoam`s PERMACOOL® Shippers

Skibox - PistenBully

IAI Westwind - AeroGraphics

Brotoloc South Brochure

Kelly Order Form

Halloween flyer