High and Low Temperature Test Chamber

LABTRON
High&LowTemperatureTest
C H A M B E R
LHTC SERIES
www.labtron.com
Email: [email protected]
HIGH & LOW TEMPERATURE TEST CHAMBER
HIGH & LOW TEMPERATURE TEST CHAMBER LHTC-A1 SERIES
We provide a range High & Low Temperature Test Chamber that assures precise environment to test
the product at extreme temperature conditions. This machine has two high temperature chamber and
la low temperature chamber that helps carry out accurate process in one or two cycles. Also it is strictly
configured under the CE and ISO standard that provides a safe, reliable and efficient result.
Features
• Equipped with two chambers, one with high temperature region and another with low temperature
region
• Large LCD coloured touch screen with interactive microcomputer control system
• User-friendly and stable
• LAN network communication interface controller
• High and low conditions can be set independently
• Provision to set defrost cycle
• Consist of plate heat exchanger and dual-type ultra-low temperature refrigeration systems
Application
This device can be applied in various industries such as electrical, electronics, instruments and meters,
aviation, medical equipment, colleges and universities, research laboratories, petroleum and chemical
products.
2
www.labtron.com
HIGH & LOW TEMPERATURE TEST CHAMBER
Specification
Model
LHTC-A10
Temperature Range
For high-temperature: +60℃~+150℃; For
low-temperature: -10℃~-40℃
Temperature Resolution
0.01℃
Temperature Control
±2℃
Heating Time at High-Temperature Region
RT~+150℃ about 35min (RT is from +5~+30℃)
Cooling Time at Low-Temperature Region
RT~-40℃ about 50min (RT is from +5~+30℃)
Dimension of Testing Region (W×H×D) cm
50×50×50
Outer Dimension (W×H×D) cm
140×180×142
Testing Basket Size (W×H×D) cm
30×40×30
Material Used
SUS#304 Cold-Heat-resistant stainless steel
Weight
10Kg
www.labtron.com
3
HIGH & LOW TEMPERATURE TEST CHAMBER
HIGH & LOW TEMPERATURE TEST CHAMBER LHTC-A2 SERIES
Labtron model of High & Low Temperature Test Chamber LHTC-A2 Series provides precise environment
to test the product at extreme temperature conditions. This machine has three slots for high temperature,
low temperature and testing chamber that helps carry out accurate process depending upon the
requirement. Also it is strictly configured under the CE and ISO standard that provides a safe, reliable
and efficient result.
Features
• Designed with 3 slots namely, high temperature region, low temperature region and testing region
• Made up of high quality stainless steel body with glass wool and PU foam rubber insulation
• Protection against overheating, over-temperature, over-pressure and dry heat
• For effective cooling it uses dual cooling system, air-cooling and water cooling
• Coloured LCD touch screen control panel
Application
It is required in fields such as aviation, electrical, electronics, medical equipment, Medical institutes and
research laboratories along with testing building materials, petroleum and chemical products.
4
www.labtron.com
HIGH & LOW TEMPERATURE TEST CHAMBER
Specification
Model
LHTC-A20
Temperature Range
high-temperature: 80℃~200℃; low-temperature:
-75℃~-10℃
Heating Time at High-Temperature Region
60℃~200℃ about 25min
Cooling Time at Low-Temperature Region
20℃~-55℃ about 60min; 20℃~-65℃ about
75min; 20℃~-75℃ about 90min
Cooling System
Copy blowing type or water-cooled, and environmental protection refrigerant
Insulation
High-precision glass wool + PU foam rubber
Outer Dimension (W×H×D) cm
190×200×155
Power
AC380V±10% 3PH 50/60Hz
www.labtron.com
5
HIGH & LOW TEMPERATURE TEST CHAMBER
HIGH & LOW TEMPERATURE TEST CHAMBER LHTC-A3 SERIES
Labtron High & Low Temperature Test Chamber provides precise environment to test the product at
extreme temperature conditions. This machine feature leak proof and safe functionality, along with
assured of being strictly configured under the CE and ISO standards that provides a safe, reliable and
efficient result.
Features
• Provide protection against Leak current, short circuit, over temperature, over-current, motor overheating,
over pressure, compressor overload
• Insulated with double-resistant high temperature aging of silicone rubber seal
• Outer body is made up of superior quality carbon steel plate and inner body is made up of corrosion
resistant stainless steel board
• Circulatory system uses effective air conditioning type motor
• Designed with glass windows for clear observation
Application
This model is specifically designed to be applied to test the products quality such as electronic, chemicals,
building materials, plastic products, electrical appliances, food, metals, aerospace, medical equipments.
6
www.labtron.com
HIGH & LOW TEMPERATURE TEST CHAMBER
Specification
Model
LHTC-A30
Temperature Range
(-)40℃ to 150℃
Heating Time at High-Temperature Region
(-)40℃ to 100℃ about 55min
Cooling Time at Low-Temperature Region
25℃ to -70℃ about 80min
Cooling System
Totally enclosed air-cooled single-stage compression refrigerate mode
Insulation
Double-resistant high-temperature aging of silicone rubber seal
Power
AC380V±10%, 50±0.5Hz Three-phase five-wire
system
www.labtron.com
7
Labtron Equipment Ltd
Basing View, Basingstoke, Hampshire RG21 4RG, UK
Phone: 01256 610 110 | Email: [email protected]
Webiste: www.Labtron.com