EN54-23 - Hochiki Europe

Choosing your VAD
CHQ-WB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. The unit
is designed to fit the YBN-R/3, YBNR/3(SCI), YBO-BS or the YBO-R/(SCI), and
is available in Red or White LEDs.
Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and white)
Approved to EN54-23:2010 Category ‘W’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
Type
Wall
Beacons
Base Models
LED Colour
What type of VAD?
Which case colour?
Ivory case
White case
Product Colour
CHQ-WB/WL
White
Ivory
CHQ-WB(WHT)/WL
White
White
CHQ-WB(RED)/WL
White
Red
CHQ-WB/RL
Red
Ivory
CHQ-WB(WHT)/RL
Red
White
CHQ-WB(RED)/RL
Red
Red
Red case
Wall Sounder Beacon
White case
Which LED colour?
Product
White LEDs
YBO-BSB2/WL
Red LEDs
YBO-BSB2/RL
White LEDs
YBO-BSB2(WHT)/WL
Red LEDs
YBO-BSB2(WHT)/RL
White LEDs
CHQ-WSB2/WL
Red LEDs
CHQ-WSB2/RL
White LEDs
CHQ-WSB2(WHT)/WL
Red LEDs
CHQ-WSB2(WHT)/RL
EN54-23 Ratings
1
2
3
CHQ-CB/RL
O
C-3-7.5
C-3-10
CHQ-CB/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB/WL-15
O
C-3-10
C-3-15
CHQ-CB(WHT)/RL
O
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL-15
O
C-3-10
C-3-15
CHQ-CB(RED)/RL
O
C-3-7.5
C-3-10
CHQ-CB(RED)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(RED)/WL-15
O
C-3-10
C-3-15
White LEDs
CHQ-WB/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(WHT)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(WHT)/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(RED)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(RED)/RL
O
O
W-2.4-5
Red LEDs
An Addressable Loop-Powered Base
Sounder Beacon, providing 13 volume
levels and 51 tones with a maximum
output of up to 98 dB(A) (±2 dB(A)) with
low current consumption. The unit
is designed to fit either the YBN-R/3,
YBO-R/SCI Bases.
Base
Sounder
Beacons








Loop Powered
Single Loop Address, addressed by either Control Panel or TCH-B100
50 ~ 98 dB(A) (±2 dB(A)) output at 1m
Fits Hochiki Standard or Isolator
Bases and supports ESP Sensors and Remote Indicator
51 User-Selectable Tones (all tones EN54-3 compatible)
Beacon and Sounder can be controlled independently**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
YBO-BSB2/WL
White
Ivory
YBO-BSB2(WHT)/WL
White
White
YBO-BSB/RL
Red
Ivory
YBO-BSB2(WHT)/RL
Red
White
Ivory case
White case
Red case
Ivory case
Wall Beacon
White case
Wall
Sounder
Beacons
Red case






White LEDs
CDXconventional
As per CHQ-WS2 plus:
An Addressable Loop-Powered Wall
Sounder Beacon, as per the CHQ-WS2
but additionally featuring an integral
beacon within the horn which utilises
high intensity LED technology. Special
bases available: YBO-R/3(RED), YBO-R/
SCI(RED), YBO-R/3(WHT) and YBO-R/
SCI(WHT-SNDR).
White LEDs
Red LEDs
**Panel compatibility dependent
CHQ-WSB2
White LEDs
Red LEDs
Ceiling Beacon
A Guide to Our Products
‘O’ Rated
**Panel compatibility dependent
YBO-BSB2
Variable flash frequency
High Intensity LED technology
Independent control of Sounder and
Beacon
Auto-shutdown Mode available - can be
set independently for sounder or beacon**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
CHQ-WSB2/WL
White
Red
CHQ-WSB2(WHT)/WL
White
White
What type of VAD?
Which case
colour?
Red case
Standard Base
White case
Red case
Waterproof Base
White case
CHQ-WSB2/RL
Red
Red
CHQ-WSB2(WHT)/RL
Red
White
**Panel compatibility dependent
www.hochikieurope.com/loudandclear >
VADs
ESPintelligent
Base Sounder Beacon
Product Model Information
Compliant
With the wide choice of VAD variants available it might seem a daunting task to identify the best unit for the application. Therefore
we have devised this simple configuration table which allows you to source the correct VAD by answering questions and following the
branches to the appropriate device variant. Simply select the VAD type, then the case colour and finally the LED colour. The ratings
column allows you to check the coverage volume settings available. Coverage volumes are selected via the CIE*.
HOCHIKI EUROPE (UK) LIMITED
EN54-23 Ratings
Which LED
colour?
Product
White LEDs
CWST-RW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-RW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
Wall Fitted
Ceiling Ceiling
Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, United Kingdom
T: +44 (0)1634 260133 F: +44 (0)1634 260132 E: (UK Sales) [email protected]
E: (Non UK Sales) [email protected]
W: www.hochikieurope.com/loudandclear
* Check CIE compatibility
ESPintelligent










EN54-23
Your Safety, Our Technology
Our Products
Our Products
EN54-23 - An Introduction
Our Products
Visual Alarm Devices (VADs) are an essential component to most fire alarm systems. They provide a visual indication of an alarm condition
to those people who wouldn’t normally be alerted to a fire by standard audible-only devices such as sounders and bells.
The Disability Discrimination Act of 1995 has highlighted the need for the inclusion of VADs in all public buildings, specifically in areas
where people with impaired hearing work in isolation. However VADs are also required in noisy environments where staff might be wearing
ear defenders such as factories, foundries etc.
A new product standard, BS EN 54-23:2010 (Fire detection and fire alarms systems. Part 23: Fire alarm devices - Visual alarm devices),
has been introduced primarily to standardise the requirements, test methods and performance of VADs and ensure their light output is
measured in a uniform manner. This standard will be mandatory throughout Europe from 31st December 2013 and all manufacturers of
VADs will be affected.
CDXconventional
Key Features of the Hochiki Range of EN54-23 Compliant VADs
CWST-S5
A Conventional Beacon which features high
Hochiki’s range of VADS which will be fully EN54-23 compliant will be available Q2 2014.
 The EN54-23 ratings of these Beacons (the brightness of the LEDs – which affects the area that is illuminated) can be adjusted
on each model from the control panel*. This reduces the number of devices required in the range as each one can produce up to three different ratings making it easier to choose the right VAD for the task.
Calculating Coverage Volume
 The circuitry in our new Wall and Ceiling Beacons is continually monitored to ensure that it is still functioning. A malfunctioning device will show at the panel as a fault saving time and effort on maintenance inspections*.
The needs for VADs will be identified as part of the risk assessment. As with other fire alarm system components, there are a number of
challenges that must be considered in the layout design and installation of VADs.
 When in operation, these Beacons monitor the LED light output via a separate sensor to ensure that a flash occurs, again saving
time on scheduled walk-tests. A failure to operate is indicated as a fault at the panel**.
One challenge is the illumination of the entire volume of the open space where the alarm must be visible. VADs must produce sufficiently
intense light, so that an individual located anywhere in the space, looking either towards or away from the VAD, would be alerted in the
event of an emergency.
 The control panel can be programmed to perform an automatic daily LED check on our Wall and Ceiling Beacons, consisting of a
lower power single flash, recorded by the in-built sensor. This reduces the probability of a failure on demand, just when the
device is needed. A failure is indicated at the panel**.
The performance of VADs under the new standard is now assessed against a minimum required illumination of 0.4 lux on surfaces
perpendicular to the direction of the light emitted from the device.
 Our new Wall and Ceiling Beacons have the ability to be powered externally from a separate 24V power supply. This means for projects that require many VADs the loop current isn’t drained by the LEDs when they are activated (meaning more devices on the loop is possible)**.
VADs will now be classified into three categories based on their application:
 Custom-designed lens
 W - Wall-mounted
 C - Ceiling-mounted
 O - Open Category
 LED technology
Approved to EN54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start-up
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
Wall &
Ceiling
Beacons
Base Models
LED Colour
Product Colour
CWST-RW-S5
White
Red
CWST-RR-S5
Red
Red
CWST-WW-S5
White
White
CWST-WR-S5
Red
White
 Outdoor variants available (used with the wall sounder weatherproofing kit)
W and C mounting categories are specified at specific installation heights and particular patterns of coverage - see below for more
information. Within these two categories, the shape of the volume covered is fixed by the standard. The dimensions of this coverage
volume are specified by the manufacturer. For all categories, the volume covered can be used to determine VAD spacing within the building.
W Category (Wall-mounted) Coverage Volume
C Category (Ceiling-Mounted) Coverage Volume
Wall mounted VADs cover a cuboid volume with a square floor
area. The coverage volume is presented as a code in the form of
W - X - Y, where W = Wall-mounted category. X is the maximum
mounting height (m) and Y is the width and length (m) of the
coverage floor area - see diagram. The minimum mounting
height allowable
by the standard
is 2.4m.
Ceiling-mounted VADs cover a cylindrical area. The coverage
volume is presented as a code in the form C - X - Y, where C =
Ceiling-mounted category. X is the maximum mounting height (m)
and Y is the diameter (m) of the coverage volume’s floor area - see
diagram. The maximum mounting height can only be specified as
3, 6 or 9m.
For example
Hochiki’s
wall-mounting
VAD has a
classification of
W-2.4-5. This
means it should
be mounted at
2.4m from the
floor and will
cover an area of
up to 5m by 5m
output LEDs, advanced optics and an innovative
lens design, providing outstanding Omnidirectional light coverage at low current draw.
Specifically designed for, and approved to meet
EN54-23. CWST-S5 delivers quality, reliability and
long operational life.
 The new Wall and Ceiling Beacons in our new EN54-23 compliant range are available with either red or white LEDs offering additional flexibility to the end-installer when deciding on the requirements of each installation






VAD
Y
X
Y
ESPintelligent
CHQ-CB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. Coverage
diameters include 5m, 7.5m, 10m and
15m diameter*. The unit is designed to
fit the YBN-R/3, YBN-R/3(SCI), YBO-BS or
the YBO-R/(SCI), and is available in Red
or White LEDs.










Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and
white)
Approved to EN54-23:2010 Category ‘C’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
CWST-W5
A Conventional Weatherproof Beacon, which
features high output LEDs, advanced optics and
an innovative lens design, providing outstanding
Omni-directional light coverage at low current
draw. Specifically designed for, and approved to
meet EN54-23. The CWST-W5 delivers outstanding
quality, reliability and long operational life.
Weatherproof base provides IP65 for external
use applications
Product Model Information
For example
Hochiki’s ceilingmounting VAD has
a classification of
C-3-15. This means
it can be mounted
up to 3m from the
floor and will cover
a cylindrical area of
15m diameter.
Type
VAD
X
Ceiling
Beacons
Base Models
LED Colour
CHQ-CB/WL
White
Ivory
CHQ-CB(WHT)/WL
White
White
CHQ-CB(RED)/WL
White
Red
CHQ-CB/WL-15
White
Product Colour
Base Models
LED Colour
CWST-RW-W5
White
Red
CWST-RR-W5
Red
Red
Ivory
CWST-WW-W5
White
White
CWST-WR-W5
Red
White
CHQ-CB(WHT)/WL-15
White
White
CHQ-CB(RED)/WL-15
White
Red
CHQ-CB/RL
Red
Ivory
CHQ-CB(WHT)/RL
Red
White
CHQ-CB(RED)/RL
Red
Red
*0.5Hz flash frequency white LED **Panel compatibility dependent
www.hochikieurope.com/loudandclear >
www.hochikieurope.com/loudandclear >
Approved to En54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start up
IP65
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
Y
The width of the
room is Y/1.414







www.hochikieurope.com/loudandclear >
Product Colour
Our Products
EN54-23 - An Introduction
Our Products
Visual Alarm Devices (VADs) are an essential component to most fire alarm systems. They provide a visual indication of an alarm condition
to those people who wouldn’t normally be alerted to a fire by standard audible-only devices such as sounders and bells.
The Disability Discrimination Act of 1995 has highlighted the need for the inclusion of VADs in all public buildings, specifically in areas
where people with impaired hearing work in isolation. However VADs are also required in noisy environments where staff might be wearing
ear defenders such as factories, foundries etc.
A new product standard, BS EN 54-23:2010 (Fire detection and fire alarms systems. Part 23: Fire alarm devices - Visual alarm devices),
has been introduced primarily to standardise the requirements, test methods and performance of VADs and ensure their light output is
measured in a uniform manner. This standard will be mandatory throughout Europe from 31st December 2013 and all manufacturers of
VADs will be affected.
CDXconventional
Key Features of the Hochiki Range of EN54-23 Compliant VADs
CWST-S5
A Conventional Beacon which features high
Hochiki’s range of VADS which will be fully EN54-23 compliant will be available Q2 2014.
 The EN54-23 ratings of these Beacons (the brightness of the LEDs – which affects the area that is illuminated) can be adjusted
on each model from the control panel*. This reduces the number of devices required in the range as each one can produce up to three different ratings making it easier to choose the right VAD for the task.
Calculating Coverage Volume
 The circuitry in our new Wall and Ceiling Beacons is continually monitored to ensure that it is still functioning. A malfunctioning device will show at the panel as a fault saving time and effort on maintenance inspections*.
The needs for VADs will be identified as part of the risk assessment. As with other fire alarm system components, there are a number of
challenges that must be considered in the layout design and installation of VADs.
 When in operation, these Beacons monitor the LED light output via a separate sensor to ensure that a flash occurs, again saving
time on scheduled walk-tests. A failure to operate is indicated as a fault at the panel**.
One challenge is the illumination of the entire volume of the open space where the alarm must be visible. VADs must produce sufficiently
intense light, so that an individual located anywhere in the space, looking either towards or away from the VAD, would be alerted in the
event of an emergency.
 The control panel can be programmed to perform an automatic daily LED check on our Wall and Ceiling Beacons, consisting of a
lower power single flash, recorded by the in-built sensor. This reduces the probability of a failure on demand, just when the
device is needed. A failure is indicated at the panel**.
The performance of VADs under the new standard is now assessed against a minimum required illumination of 0.4 lux on surfaces
perpendicular to the direction of the light emitted from the device.
 Our new Wall and Ceiling Beacons have the ability to be powered externally from a separate 24V power supply. This means for projects that require many VADs the loop current isn’t drained by the LEDs when they are activated (meaning more devices on the loop is possible)**.
VADs will now be classified into three categories based on their application:
 Custom-designed lens
 W - Wall-mounted
 C - Ceiling-mounted
 O - Open Category
 LED technology
Approved to EN54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start-up
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
Wall &
Ceiling
Beacons
Base Models
LED Colour
Product Colour
CWST-RW-S5
White
Red
CWST-RR-S5
Red
Red
CWST-WW-S5
White
White
CWST-WR-S5
Red
White
 Outdoor variants available (used with the wall sounder weatherproofing kit)
W and C mounting categories are specified at specific installation heights and particular patterns of coverage - see below for more
information. Within these two categories, the shape of the volume covered is fixed by the standard. The dimensions of this coverage
volume are specified by the manufacturer. For all categories, the volume covered can be used to determine VAD spacing within the building.
W Category (Wall-mounted) Coverage Volume
C Category (Ceiling-Mounted) Coverage Volume
Wall mounted VADs cover a cuboid volume with a square floor
area. The coverage volume is presented as a code in the form of
W - X - Y, where W = Wall-mounted category. X is the maximum
mounting height (m) and Y is the width and length (m) of the
coverage floor area - see diagram. The minimum mounting
height allowable
by the standard
is 2.4m.
Ceiling-mounted VADs cover a cylindrical area. The coverage
volume is presented as a code in the form C - X - Y, where C =
Ceiling-mounted category. X is the maximum mounting height (m)
and Y is the diameter (m) of the coverage volume’s floor area - see
diagram. The maximum mounting height can only be specified as
3, 6 or 9m.
For example
Hochiki’s
wall-mounting
VAD has a
classification of
W-2.4-5. This
means it should
be mounted at
2.4m from the
floor and will
cover an area of
up to 5m by 5m
output LEDs, advanced optics and an innovative
lens design, providing outstanding Omnidirectional light coverage at low current draw.
Specifically designed for, and approved to meet
EN54-23. CWST-S5 delivers quality, reliability and
long operational life.
 The new Wall and Ceiling Beacons in our new EN54-23 compliant range are available with either red or white LEDs offering additional flexibility to the end-installer when deciding on the requirements of each installation






VAD
Y
X
Y
ESPintelligent
CHQ-CB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. Coverage
diameters include 5m, 7.5m, 10m and
15m diameter*. The unit is designed to
fit the YBN-R/3, YBN-R/3(SCI), YBO-BS or
the YBO-R/(SCI), and is available in Red
or White LEDs.










Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and
white)
Approved to EN54-23:2010 Category ‘C’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
CWST-W5
A Conventional Weatherproof Beacon, which
features high output LEDs, advanced optics and
an innovative lens design, providing outstanding
Omni-directional light coverage at low current
draw. Specifically designed for, and approved to
meet EN54-23. The CWST-W5 delivers outstanding
quality, reliability and long operational life.
Weatherproof base provides IP65 for external
use applications
Product Model Information
For example
Hochiki’s ceilingmounting VAD has
a classification of
C-3-15. This means
it can be mounted
up to 3m from the
floor and will cover
a cylindrical area of
15m diameter.
Type
VAD
X
Ceiling
Beacons
Base Models
LED Colour
CHQ-CB/WL
White
Ivory
CHQ-CB(WHT)/WL
White
White
CHQ-CB(RED)/WL
White
Red
CHQ-CB/WL-15
White
Product Colour
Base Models
LED Colour
CWST-RW-W5
White
Red
CWST-RR-W5
Red
Red
Ivory
CWST-WW-W5
White
White
CWST-WR-W5
Red
White
CHQ-CB(WHT)/WL-15
White
White
CHQ-CB(RED)/WL-15
White
Red
CHQ-CB/RL
Red
Ivory
CHQ-CB(WHT)/RL
Red
White
CHQ-CB(RED)/RL
Red
Red
*0.5Hz flash frequency white LED **Panel compatibility dependent
www.hochikieurope.com/loudandclear >
www.hochikieurope.com/loudandclear >
Approved to En54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start up
IP65
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
Y
The width of the
room is Y/1.414







www.hochikieurope.com/loudandclear >
Product Colour
Our Products
EN54-23 - An Introduction
Our Products
Visual Alarm Devices (VADs) are an essential component to most fire alarm systems. They provide a visual indication of an alarm condition
to those people who wouldn’t normally be alerted to a fire by standard audible-only devices such as sounders and bells.
The Disability Discrimination Act of 1995 has highlighted the need for the inclusion of VADs in all public buildings, specifically in areas
where people with impaired hearing work in isolation. However VADs are also required in noisy environments where staff might be wearing
ear defenders such as factories, foundries etc.
A new product standard, BS EN 54-23:2010 (Fire detection and fire alarms systems. Part 23: Fire alarm devices - Visual alarm devices),
has been introduced primarily to standardise the requirements, test methods and performance of VADs and ensure their light output is
measured in a uniform manner. This standard will be mandatory throughout Europe from 31st December 2013 and all manufacturers of
VADs will be affected.
CDXconventional
Key Features of the Hochiki Range of EN54-23 Compliant VADs
CWST-S5
A Conventional Beacon which features high
Hochiki’s range of VADS which will be fully EN54-23 compliant will be available Q2 2014.
 The EN54-23 ratings of these Beacons (the brightness of the LEDs – which affects the area that is illuminated) can be adjusted
on each model from the control panel*. This reduces the number of devices required in the range as each one can produce up to three different ratings making it easier to choose the right VAD for the task.
Calculating Coverage Volume
 The circuitry in our new Wall and Ceiling Beacons is continually monitored to ensure that it is still functioning. A malfunctioning device will show at the panel as a fault saving time and effort on maintenance inspections*.
The needs for VADs will be identified as part of the risk assessment. As with other fire alarm system components, there are a number of
challenges that must be considered in the layout design and installation of VADs.
One challenge is the illumination of the entire volume of the open space where the alarm must be visible. VADs must produce sufficiently
intense light, so that an individual located anywhere in the space, looking either towards or away from the VAD, would be alerted in the
event of an emergency.
Wall &
Ceiling
Beacons
 The control panel can be programmed to perform an automatic daily LED check on our Wall and Ceiling Beacons, consisting of a
lower power single flash, recorded by the in-built sensor. This reduces the probability of a failure on demand, just when the
device is needed. A failure is indicated at the panel**.
 Our new Wall and Ceiling Beacons have the ability to be powered externally from a separate 24V power supply. This means for projects that require many VADs the loop current isn’t drained by the LEDs when they are activated (meaning more devices on the loop is possible)**.
VADs will now be classified into three categories based on their application:
 Custom-designed lens
 W - Wall-mounted
 C - Ceiling-mounted
 O - Open Category
 LED technology
Approved to EN54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start-up
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
 When in operation, these Beacons monitor the LED light output via a separate sensor to ensure that a flash occurs, again saving
time on scheduled walk-tests. A failure to operate is indicated as a fault at the panel**.
The performance of VADs under the new standard is now assessed against a minimum required illumination of 0.4 lux on surfaces
perpendicular to the direction of the light emitted from the device.
Base Models
LED Colour
Product Colour
CWST-RW-S5
White
Red
CWST-RR-S5
Red
Red
CWST-WW-S5
White
White
CWST-WR-S5
Red
White
 Outdoor variants available (used with the wall sounder weatherproofing kit)
W and C mounting categories are specified at specific installation heights and particular patterns of coverage - see below for more
information. Within these two categories, the shape of the volume covered is fixed by the standard. The dimensions of this coverage
volume are specified by the manufacturer. For all categories, the volume covered can be used to determine VAD spacing within the building.
W Category (Wall-mounted) Coverage Volume
C Category (Ceiling-Mounted) Coverage Volume
Wall mounted VADs cover a cuboid volume with a square floor
area. The coverage volume is presented as a code in the form of
W - X - Y, where W = Wall-mounted category. X is the maximum
mounting height (m) and Y is the width and length (m) of the
coverage floor area - see diagram. The minimum mounting
height allowable
by the standard
is 2.4m.
Ceiling-mounted VADs cover a cylindrical area. The coverage
volume is presented as a code in the form C - X - Y, where C =
Ceiling-mounted category. X is the maximum mounting height (m)
and Y is the diameter (m) of the coverage volume’s floor area - see
diagram. The maximum mounting height can only be specified as
3, 6 or 9m.
For example
Hochiki’s
wall-mounting
VAD has a
classification of
W-2.4-5. This
means it should
be mounted at
2.4m from the
floor and will
cover an area of
up to 5m by 5m
output LEDs, advanced optics and an innovative
lens design, providing outstanding Omnidirectional light coverage at low current draw.
Specifically designed for, and approved to meet
EN54-23. CWST-S5 delivers quality, reliability and
long operational life.
 The new Wall and Ceiling Beacons in our new EN54-23 compliant range are available with either red or white LEDs offering additional flexibility to the end-installer when deciding on the requirements of each installation






VAD
Y
X
Y
ESPintelligent
CHQ-CB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. Coverage
diameters include 5m, 7.5m, 10m and
15m diameter*. The unit is designed to
fit the YBN-R/3, YBN-R/3(SCI), YBO-BS or
the YBO-R/(SCI), and is available in Red
or White LEDs.










Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and
white)
Approved to EN54-23:2010 Category ‘C’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
CWST-W5
A Conventional Weatherproof Beacon, which
features high output LEDs, advanced optics and
an innovative lens design, providing outstanding
Omni-directional light coverage at low current
draw. Specifically designed for, and approved to
meet EN54-23. The CWST-W5 delivers outstanding
quality, reliability and long operational life.
Weatherproof base provides IP65 for external
use applications
Product Model Information
For example
Hochiki’s ceilingmounting VAD has
a classification of
C-3-15. This means
it can be mounted
up to 3m from the
floor and will cover
a cylindrical area of
15m diameter.
Type
VAD
X
Ceiling
Beacons
Base Models
LED Colour
CHQ-CB/WL
White
Product Colour
Ivory
CHQ-CB(WHT)/WL
White
White
CHQ-CB(RED)/WL
White
Red
www.hochikieurope.com/loudandclear >
Base Models
LED Colour
Product Colour
CWST-RW-W5
White
Red
CWST-RR-W5
Red
Red
CHQ-CB/WL-15
White
Ivory
CWST-WW-W5
White
White
CHQ-CB(WHT)/WL-15
White
White
CWST-WR-W5
Red
White
CHQ-CB(RED)/WL-15
White
Red
CHQ-CB/RL
Red
Ivory
CHQ-CB(WHT)/RL
Red
White
CHQ-CB(RED)/RL
Red
Red
*0.5Hz flash frequency white LED **Panel compatibility dependent
www.hochikieurope.com/loudandclear >
Approved to En54-23, C & W
categories
Advanced optics ensures superior
light coverage at low current draw
Synchronised flash exceeds
EN54-23 standard
Soft start feature reduces power
surges during system start up
IP65
Available in either red or
white casings
Available with either a red or
white LED
Product Model Information
Type
Y
The width of the
room is Y/1.414







www.hochikieurope.com/loudandclear >
Choosing your VAD
CHQ-WB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. The unit
is designed to fit the YBN-R/3, YBNR/3(SCI), YBO-BS or the YBO-R/(SCI), and
is available in Red or White LEDs.
Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and white)
Approved to EN54-23:2010 Category ‘W’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
Type
Wall
Beacons
Base Models
LED Colour
What type of VAD?
Which case colour?
Ivory case
White case
Product Colour
CHQ-WB/WL
White
Ivory
CHQ-WB(WHT)/WL
White
White
CHQ-WB(RED)/WL
White
Red
CHQ-WB/RL
Red
Ivory
CHQ-WB(WHT)/RL
Red
White
CHQ-WB(RED)/RL
Red
Red
Red case
Wall Sounder Beacon
White case
Which LED colour?
Product
White LEDs
YBO-BSB2/WL
Red LEDs
YBO-BSB2/RL
White LEDs
YBO-BSB2(WHT)/WL
Red LEDs
YBO-BSB2(WHT)/RL
White LEDs
CHQ-WSB2/WL
Red LEDs
CHQ-WSB2/RL
White LEDs
CHQ-WSB2(WHT)/WL
Red LEDs
CHQ-WSB2(WHT)/RL
EN54-23 Ratings
1
2
3
CHQ-CB/RL
O
C-3-7.5
C-3-10
CHQ-CB/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB/WL-15
O
C-3-10
C-3-15
CHQ-CB(WHT)/RL
O
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL-15
O
C-3-10
C-3-15
CHQ-CB(RED)/RL
O
C-3-7.5
C-3-10
CHQ-CB(RED)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(RED)/WL-15
O
C-3-10
C-3-15
White LEDs
CHQ-WB/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(WHT)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(WHT)/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(RED)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(RED)/RL
O
O
W-2.4-5
Red LEDs
An Addressable Loop-Powered Base
Sounder Beacon, providing 13 volume
levels and 51 tones with a maximum
output of up to 98 dB(A) (±2 dB(A)) with
low current consumption. The unit
is designed to fit either the YBN-R/3,
YBO-R/SCI Bases.
Base
Sounder
Beacons








Loop Powered
Single Loop Address, addressed by either Control Panel or TCH-B100
50 ~ 98 dB(A) (±2 dB(A)) output at 1m
Fits Hochiki Standard or Isolator
Bases and supports ESP Sensors and Remote Indicator
51 User-Selectable Tones (all tones EN54-3 compatible)
Beacon and Sounder can be controlled independently**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
YBO-BSB2/WL
White
Ivory
YBO-BSB2(WHT)/WL
White
White
YBO-BSB/RL
Red
Ivory
YBO-BSB2(WHT)/RL
Red
White
Ivory case
White case
Red case
Ivory case
Wall Beacon
White case
Wall
Sounder
Beacons
Red case






White LEDs
CDXconventional
As per CHQ-WS2 plus:
An Addressable Loop-Powered Wall
Sounder Beacon, as per the CHQ-WS2
but additionally featuring an integral
beacon within the horn which utilises
high intensity LED technology. Special
bases available: YBO-R/3(RED), YBO-R/
SCI(RED), YBO-R/3(WHT) and YBO-R/
SCI(WHT-SNDR).
White LEDs
Red LEDs
**Panel compatibility dependent
CHQ-WSB2
White LEDs
Red LEDs
Ceiling Beacon
A Guide to Our Products
‘O’ Rated
**Panel compatibility dependent
YBO-BSB2
Variable flash frequency
High Intensity LED technology
Independent control of Sounder and
Beacon
Auto-shutdown Mode available - can be
set independently for sounder or beacon**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
CHQ-WSB2/WL
White
Red
CHQ-WSB2(WHT)/WL
White
White
What type of VAD?
Which case
colour?
Red case
Standard Base
White case
Red case
Waterproof Base
White case
CHQ-WSB2/RL
Red
Red
CHQ-WSB2(WHT)/RL
Red
White
**Panel compatibility dependent
www.hochikieurope.com/loudandclear >
VADs
ESPintelligent
Base Sounder Beacon
Product Model Information
Compliant
With the wide choice of VAD variants available it might seem a daunting task to identify the best unit for the application. Therefore
we have devised this simple configuration table which allows you to source the correct VAD by answering questions and following the
branches to the appropriate device variant. Simply select the VAD type, then the case colour and finally the LED colour. The ratings
column allows you to check the coverage volume settings available. Coverage volumes are selected via the CIE*.
HOCHIKI EUROPE (UK) LIMITED
EN54-23 Ratings
Which LED
colour?
Product
White LEDs
CWST-RW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-RW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
Wall Fitted
Ceiling Ceiling
Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, United Kingdom
T: +44 (0)1634 260133 F: +44 (0)1634 260132 E: (UK Sales) [email protected]
E: (Non UK Sales) [email protected]
W: www.hochikieurope.com/loudandclear
* Check CIE compatibility
ESPintelligent










EN54-23
Your Safety, Our Technology
Our Products
Choosing your VAD
CHQ-WB
An Addressable Loop-Powered Beacon,
with a high intensity LED and a custom
designed free-form optic which
produces a highly visible flash. The unit
is designed to fit the YBN-R/3, YBNR/3(SCI), YBO-BS or the YBO-R/(SCI), and
is available in Red or White LEDs.
Loop Powered
Single loop address via TCH-B100
High Intensity LED technology
0.5/1 Hz flash frequency
Addressable via TCH-B100
Choice of 2 LED colours (red and white)
Approved to EN54-23:2010 Category ‘W’
High efficiency
Selectable light output**
Operating voltage 17-41 vdc
Type
Wall
Beacons
Base Models
LED Colour
What type of VAD?
Which case colour?
Ivory case
White case
Product Colour
CHQ-WB/WL
White
Ivory
CHQ-WB(WHT)/WL
White
White
CHQ-WB(RED)/WL
White
Red
CHQ-WB/RL
Red
Ivory
CHQ-WB(WHT)/RL
Red
White
CHQ-WB(RED)/RL
Red
Red
Red case
Wall Sounder Beacon
White case
Which LED colour?
Product
White LEDs
YBO-BSB2/WL
Red LEDs
YBO-BSB2/RL
White LEDs
YBO-BSB2(WHT)/WL
Red LEDs
YBO-BSB2(WHT)/RL
White LEDs
CHQ-WSB2/WL
Red LEDs
CHQ-WSB2/RL
White LEDs
CHQ-WSB2(WHT)/WL
Red LEDs
CHQ-WSB2(WHT)/RL
EN54-23 Ratings
1
2
3
CHQ-CB/RL
O
C-3-7.5
C-3-10
CHQ-CB/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB/WL-15
O
C-3-10
C-3-15
CHQ-CB(WHT)/RL
O
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(WHT)/WL-15
O
C-3-10
C-3-15
CHQ-CB(RED)/RL
O
C-3-7.5
C-3-10
CHQ-CB(RED)/WL
C-3-5
C-3-7.5
C-3-10
CHQ-CB(RED)/WL-15
O
C-3-10
C-3-15
White LEDs
CHQ-WB/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(WHT)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(WHT)/RL
O
O
W-2.4-5
White LEDs
CHQ-WB(RED)/WL
W-2.4-5
W-2.4-6
W-2.4-7
Red LEDs
CHQ-WB(RED)/RL
O
O
W-2.4-5
Red LEDs
An Addressable Loop-Powered Base
Sounder Beacon, providing 13 volume
levels and 51 tones with a maximum
output of up to 98 dB(A) (±2 dB(A)) with
low current consumption. The unit
is designed to fit either the YBN-R/3,
YBO-R/SCI Bases.
Base
Sounder
Beacons








Loop Powered
Single Loop Address, addressed by either Control Panel or TCH-B100
50 ~ 98 dB(A) (±2 dB(A)) output at 1m
Fits Hochiki Standard or Isolator
Bases and supports ESP Sensors and Remote Indicator
51 User-Selectable Tones (all tones EN54-3 compatible)
Beacon and Sounder can be controlled independently**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
YBO-BSB2/WL
White
Ivory
YBO-BSB2(WHT)/WL
White
White
YBO-BSB/RL
Red
Ivory
YBO-BSB2(WHT)/RL
Red
White
Ivory case
White case
Red case
Ivory case
Wall Beacon
White case
Wall
Sounder
Beacons
Red case






White LEDs
CDXconventional
As per CHQ-WS2 plus:
An Addressable Loop-Powered Wall
Sounder Beacon, as per the CHQ-WS2
but additionally featuring an integral
beacon within the horn which utilises
high intensity LED technology. Special
bases available: YBO-R/3(RED), YBO-R/
SCI(RED), YBO-R/3(WHT) and YBO-R/
SCI(WHT-SNDR).
White LEDs
Red LEDs
**Panel compatibility dependent
CHQ-WSB2
White LEDs
Red LEDs
Ceiling Beacon
A Guide to Our Products
‘O’ Rated
**Panel compatibility dependent
YBO-BSB2
Variable flash frequency
High Intensity LED technology
Independent control of Sounder and
Beacon
Auto-shutdown Mode available - can be
set independently for sounder or beacon**
Approved to EN54-23: 2010 Category ‘O’
Operating voltage 17-41 vdc
CHQ-WSB2/WL
White
Red
CHQ-WSB2(WHT)/WL
White
White
What type of VAD?
Which case
colour?
Red case
Standard Base
White case
Red case
Waterproof Base
White case
CHQ-WSB2/RL
Red
Red
CHQ-WSB2(WHT)/RL
Red
White
**Panel compatibility dependent
www.hochikieurope.com/loudandclear >
VADs
ESPintelligent
Base Sounder Beacon
Product Model Information
Compliant
With the wide choice of VAD variants available it might seem a daunting task to identify the best unit for the application. Therefore
we have devised this simple configuration table which allows you to source the correct VAD by answering questions and following the
branches to the appropriate device variant. Simply select the VAD type, then the case colour and finally the LED colour. The ratings
column allows you to check the coverage volume settings available. Coverage volumes are selected via the CIE*.
HOCHIKI EUROPE (UK) LIMITED
EN54-23 Ratings
Which LED
colour?
Product
White LEDs
CWST-RW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-S5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-S5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-RW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-RR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
White LEDs
CWST-WW-W5
W-2.4-9.0
C-3-9.5
C-6-9.5
C-9-9.5
Red LEDs
CWST-WR-W5
W-2.4-6.2
C-3-9.4
C-6-8.6
-
Wall Fitted
Ceiling Ceiling
Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, United Kingdom
T: +44 (0)1634 260133 F: +44 (0)1634 260132 E: (UK Sales) [email protected]
E: (Non UK Sales) [email protected]
W: www.hochikieurope.com/loudandclear
* Check CIE compatibility
ESPintelligent










EN54-23
Your Safety, Our Technology
Our Products