DM-05SSM3 stage, 5 gal. mixer, 3/8” shaft for 2

Quality Mixing with DRUM-MATES for the Factory, Field or Shop
Lowers the mixing batch time significantly
Better & more accurate product quality control
Blend a wide thickness range in most containers
Control mixing pattern with adjustable blades
Get superior liquid turnover at high or low Rpm
DRUM-MATES
Advanced Process Technology
Mix Most Solutions
Mix Most Thicknesses
Mix in Most Containers
Mixer Shafts for Steel, Plastic or Fiber Pails, Drums, Totes & Tanks
Bung entry mixers with 3 to 5 tier auto-open-close blades. Available in 3 alloys
3
DM-05ZPM
3 stage, 5 gal. mixer, /8” shaft for 2-30 gal. drums, plated
3
3 stage, 5 gal. mixer, /8” shaft for 2-30 gal. drums, 304 ss
DM-05SSM
DM-55ZPM
4 stage, 55 gal. mixer, ½” shaft for 30-85 gal. drums, plated
DM-55SSM
4 stage, 55 gal. mixer, ½” shaft for 30-85 gal. drums, 304 ss
5
4-5 stage, 200-1000 gal. IBC (Tote) mixer /8” shaft, 304 ss
DM-600SSM
5
DM-600SSM/HV
4-5 stage, 200-1000 gal. IBC (Tote) mixer /8” shaft, 304 ss
DM-600SSM/2HV 4-5 stage, 200-1000 gal. IBC (Tote) mixer 5/8” shaft, 304 ss
Tote, Drum & Pail Mixers
Hand-held Pail & Drum Mixer Air Drives* ………..
For specific hand control & observation of mixing patterns & results
DM-45ADH .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 6.0 lbs.
DM-55ADH 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 10 lbs.
…… Bung Mount Drum & IBC Mixer Air Drives*
DM-45ADH
DM-55ADH
2” NPT bung mount - permits unattended mixing in drums and IBC tanks
DM-45BAS .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 12 lbs.
DM-55BAS 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 13 lbs.
Rim Mount Pail, Drum & Tank Mixer Air Drives* ………
DM-45BAS
Rim mount mixer for unattended mixing in open containers from 5 - 1000 gallons
DM-45RAS .75 Hp, 5-40Cfm, 20-100 Psi, Wt. 11 lbs.
DM-55RAS 1.5 Hp, 10-70Cfm, 40-100 Psi, Wt. 12 lbs.
DM-45RAS
IBC/Tote/Tank, 200-1000 Gal. Mixer Air Drives*
Mix with DM-600SSM, 5 stage SwingWing adjustable turbine blades
Mounted on a double rail clamping stand, blends all levels simultaneously
DM-200TAS .75 Hp air drive, 5-40 Cfm, 20-100 Psi, weight 47 lbs.
DM-400TAS 1.5 Hp air drive, 10-70 Cfm, 40-100 Psi, weight 49 lbs.
DM-600TAS 4.0 Hp air drive, 10-130 Cfm, 20-100 Psi, weight 52 lbs.
DM-200TAS
Air Drive Benefits
More Economical
Variable Speed
More Power (torque)
Lower Weight
Easier Maintenance
*All air drives include variable Rpm control, muffler coupler and Allen wrench.
55 Gallon Drum Rollers, Tumblers and Multi-axis Rotators
Ask about DRUM-MATES drum rollers and rotators for sealed, in-drum blending of dry or wet
compounds including noxious, toxic, radioactive and other hazardous or non-hazardous materials.
DRUM-MATES equipment assemblies are provided as separate components each sold on a separate basis.
Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum/IBC pumps & hand nozzles.
®
DRUM-MATES Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034
Drum Heaters
Drum Dolly Base Heater
Model DM-55HDD, For batch heating, heat sensitive, non-flammable, nonhazardous material for in-drum manufacturing or thinning liquids before mixing.
1,750 watt (at 120 volt, 14.6 amp) or a 1,920 watt (at 240 volt, 8 amp) using an
ON/OFF, thermostatic heat pulsing action. 900 lb. capacity
Drum Full Wrap Heater
Model # DM-55DWH/2, Double Zone Silicone Impregnated Fiberglass blanket
wrap style drum heater for use indoors batch heating steel drums with heat
sensitive, non-flammable, non-hazardous material for in-tote manufacturing or
thinning liquids before mixing. A built-in, adjustable thermo-switch prevents
temperature runaway. Each zone 4,500 watts, Temperature Ratings: Continuous
Use, 450° F (232° C), 240V/1PH
Tote/Tank Heaters
Tote Adjustable Full Wrap Heater
for wire or tubular framed totes, all metal or plastic totes
Model # DM-600FWH/A,
Fits totes from 40x40” to 48x48” and 36”, 42”, 48” heights.
Full wrap silicone impregnated fiberglass blanket wrap style tote heater for use
indoors, batch heating steel drums with heat sensitive, non-flammable, nonhazardous material for manufacturing or thinning liquids before mixing. Built-in,
adjustable thermostatic control prevents temperature runaway. Temperature
Range: Continuous Use, 50-160° F (10-71° C), 120V/1440w, 240V/1PH/2880w,
Optional insulated top cover.
Tote Bottom Pad Heater
for wire or tubular framed totes, all metal or plastic totes
32” X 36”, fiberglass reinforced silicone rubber bottom pad heater fits most totes,
for uniform heat underneath tote/IBC, moisture and chemical resistant, for use
indoors, batch heating heat sensitive, non-flammable, non-hazardous material for
manufacturing or thinning liquids before mixing. With controlling thermocouple
proportioning controller. Temperature: 180° F (82° C), 240 Volts, 3240 Watts
DRUM-MATES equipment assemblies are provided as separate components each sold on a separate basis.
Ask for literature on DRUM-MATES drum & tote mixers, drum tumblers, drum/tote pumps & hand nozzles.
DRUM-MATES® Inc., Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034
Quality Pumping with DRUM-MATES for the Factory, Field or Shop
Electric/Pneumatic Drum/Tote Pumps
5 gallon to 900 gallon Capacity
Air Op. Double Diaphragm Pumps
for Drum, IBC/Tank Liquid Transfer
Hand Operated Drum Pumps
Piston, Rotary or Reciprocal
for transferring almost any liquid
Complete kit, competitively priced…with low operating cost
Safe for nonflammable liquids compatible with polypropylene
Virtually maintenance free - no internal moving parts
Transfers up to: 16 Gpm, 250 Cps (medium thick), 15 ft. head
Replaces worn and faulty pumps very economically
Corrosion proof - all polypropylene plastic wetted parts
Stop cross contamination by using just one pump-per-product
Increase operation productivity with nearby dispensing sites
DM-85DGP Pump
DM-85HFR Hi-Flow
Polypropylene
DM-100HFR
Polypropylene
DM-600HFR
DM-85APR DM-55BCF Coarse
Aluminum or Stainless Mini-regulator ThreadConverters
DM-55BEF
DM-85CDH (PP)
ThreadGuard Dispensing Hose.
DRUM-MATES equipment assemblies are provided as separate components, each sold on a separate basis.
Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum & IBC pumps & hand nozzles.
DRUM-MATES® Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034
Hand Nozzle Benefits & Features
•
•
•
•
•
•
Increase operator and environment safety with carefully regulated fluid transfer
Fine outflow control for gravity or pressure transfer from pumps, tanks & reservoirs
Simplify liquid dispensing tasks from small container repacking to bulk transfer
Choice of materials for chemical resistance: plastic, aluminum or stainless steel
Manual or auto shut-off helps prevent spillage during critical transfer operations
Quality manufactured hand nozzles built for years of use in a variety of applications
DM-85HFR Series
DM-100HFR Series
Economical PP Nozzles, High-Flow, Very Good Chemical Resistance
DM-85HFR/SV or HV
DM-85HFR/SE or HE
polypropylene, stainless steel or Hastelloy and Viton
polypropylene, stainless steel or Hastelloy and EPDM
Dispensing Flow Rate:
Operating Pressure Range:
Hose Barb Sizes:
Optional Components:
0 – 40 GPM, (0 – 150 litres)
0 – 150 PSI, (0 – 1050kPa) up to 155°F
Order choice of ½”, ¾”, or 1” hose barbs
Maintenance Kit, Viton or EPDM (4 O-rings)
¾” flexible polypropylene dispensing hose
Heavy Duty PP Nozzles, Excellent Control and Chemical Resistance
DM-100HFR__”
Dispensing Flow Rate:
Air Pressure Range:
MOC NOTE:
Hose Barb Sizes:
Optional Components:
DM-600/900HFR Series
Metal Nozzles, AL & SS, Heavy Duty, High Chemical Resistance
DM-600HFR to 900HFR Series
Materials of Construction:
Heavy wall construction:
Nozzle Model Specifications:*
Extra large flow passages:*
1”, 1.5” or 2” NPT female base:*
DM-1000HFR Series
Polypropylene & Viton wetted parts
0 – 25 GPM, (0 – 95 litres)
0 – 40 PSI, (0 – 280kPa) up to 155°F
polypropylene body with external stainless spring
Order choice of ½”, ¾”, or 1” hose barbs
Maintenance Kit, Viton (4 O-rings)
¾” PP flexible dispensing hose
Numerous models to choose from!
Aluminum, Stainless, Teflon, Viton, Buna, etc.
For extra operation strength and durability
Up to 50 Gpm, up to 80 Psi up to 120°F
For low pressure drop and reduced foaming
Connectors, barbs, swivels, available separately
Teflon Nozzles, Extreme Duty, Best Chemical Resistance
DM-1000HFR Series Nozzles
Numerous models to choose from!
Materials of Construction:
Heavy wall construction:
Nozzle Model Specifications:*
Extra large flow passage:*
1/2”, 3/4” or 1” NPT female base:*
Teflon, Polypropylene, PVDF (Kynar)
For extra operation strength and durability
Up to 80 Gpm, up to 80 Psi (1/2” model)
For low pressure drop and reduced foaming
Connectors, barbs, available separately
Operation & Applications: *Features and characteristics may vary from model to model. Nozzles attach to
various internal diameter transfer hoses. Flow rates may vary depending on design, viscosity, temperature and other
variables. Nozzles dispense from a trickle flow to high pressure and volume dispensing from pumps or processing
equipment depending on nozzle model and task.
For your selection convenience most DRUM-MATES equipment items are sold as separate components.
Ask for DRUM-MATES literature on our drum & tote mixers, tumblers, pumps, & bung accessories.
®
DRUM-MATES Inc., Mixer & Pump Div., Tel: 800-621-3786, Tel: 609-261-1033, Fax: 609-261-1034
For Industrial Drum, Tote and Tank Bung Holes
Bung ThreadConverters
Converts Buttress or Mauser coarse threads to 2” NPT
Benefits: Permits easy and rapid mounting of fume filters, funnels, depth gauges,
pumps, mixers and other equipment into drums, IBC's (Totes) or any container with
2” NPT or coarse bung threads. Temp. Range: -5°F min. to +120°F max
DM-55BCF/M (European standard)
ThreadConverter hex Mauser male bung thread to 2" NPT female thread
Mauser Specifications:
2.710” OD x 1.35 " H x 3.0" dia. flat-to-flat, Thread: 6.0 mm, HDPE, EPR
DM-55BCF/B (American standard)
ThreadConverter hex Buttress male bung thread to 2" NPT female thread
Buttress Specifications:
2.525” OD x 1.812” H x 2.625" dia. flat-to-flat, Thread: 5.0 mm, HDPE
DM-55BCF/FBC (Cam-Lock)
ThreadConverter Buttress female bung thread to 2" Cam-Lock
Buttress Specifications:
3.0” OD x 3.25” H x 1.625" ID, 5.0 mm pitch, reinforced nylon, Santoprene
Bung ThreadGUARD
Permanently protects plastic drum equipment threads
Benefits:
Stops stripping and wearing of sensitive plastic threads due to constant use
in steel bung holes. Extends useful life of items like depth gauges, fume
filters, pumps and other plastic bung mounting equipment. Permits easier
equipment mounting. Items can be permanently sealed in ThreadGUARD.
DM-55BTG/S6 Specifications:
DM-55BTG Specifications:
2.0" Ht. x 2.85" OD, 2” NPT, 316 stainless steel, Wt. 12 oz.
2¾" Ht. x 2.75" OD, 2” NPT, zinc plated steel, Wt. 1.2 lbs.
Drum Bung Adapters
Permits process tube to be safely secured in drum bung
Benefits:
2” NPT bung adapter, permits tube mounting in drum bung holes for
pump tubes, filling tubes, heating tubes and other shafts etc. to be
safely secured inside a drum bung hole.
Specify tube opening size and material of construction, PP or SS.
DM-55BA/SS Specifications:
DM-55BA/SS-SID to Spec:
DM-55BA/PP Specifications:
DM-55BA/PP to Spec:
1.375” Ht. x 1.630 ID x 2.0” MPT thread, 316 stainless steel, Wt. 0.8 lb
1.375” Ht. x Spec. ID x 2.0” MPT thread, 316 stainless steel, Wt. 1.2 lb
1.375” Ht. x 1.630 ID x 2.0” MPT thread, polypropylene, Wt. 0.4 oz.
1.375” Ht. x Spec. ID x 2.0” MPT thread, polypropylene, Wt. 0.4 oz.
Safety SplashCaps
Improve bung entry mixing Quality Control in drums and totes
Benefits:
SplashCaps help prevent exposure to airborne contamination, moisture,
dust, hazardous liquid splash-back, fume exposure etc. Helps seal bung
hole during bung entry mixing or cleaning with DM-55MRT rinse tube.
Description:
Product Code
Application
Material
Wt.
DM-55SCC/MRT
DM-55SCC/SD2__
DM-55SCC/PDB2__
DM-55SCC/BAS
rinse tube cleaning with DM-55MRT
steel drum mixing with DM-55ADH/A
plastic drum mixing with DM-55ADH/A
bung mount mixing with DM-55BAS
plated steel
polyethylene
polyethylene
polyethylene
0.2 lbs.
0.1 “
0.1 “
0.1 “
DRUM-MATES equipment assemblies are provided as separate components, each sold on a separate basis.
Ask for literature on DRUM-MATES drum & IBC mixers, drum tumblers, drum & IBC pumps & hand nozzles.
DRUM-MATES® Inc., Drum Mixer & Pump Div., Tel: 1-800-621-3786 and 609-261-1033, Fax: 609-261-1034