14105201eN-MERCEDES-E280-CDI-englisch

 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
The product described in the guidance was developed, manufactured and controlled consi‐
dering the necessary safety reguirements. The product must be installed properly to ensure a proper func on and avoid danger for persons and things. Please read this installa onguide inclusive safety instruc ons carefully. Scope of supply:
QuanƟty
arƟcle
1x Tuningbox 1x loom 1x Bridge plug 1x Fastening kit 1. Open the hood. 2.Turn the igni on off! 3.Remove the igni onkey! 4.Close and lock all doors! 5.Do not open any doors while installing the tuning‐
kit! 6.Wait 5 minutes before beginning the installa on In order to avoid damages at electronic vehicle com‐
ponents, you have to be sure that you have done all necessary methods for electostaƟc discharge . Install the electronic in an waterproof and vibraƟonless place. Do not make any changes at the tuning‐
kit! Do not expand or shorten the loom. Datum: 03.06.2013 Seite:1 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
OVERVIEW
RAIL PRESSURE SENSOR
CAMSHAFT SENSOR
BOOST PRESSURE SENSOR
overview:
The chiptuning box is aƩached to the following points:

Camsha sensor 
rail pressure sensor 
boost pressure sensor Necassary tools:

Cu ers, socket wrench SW 10 PreparaƟon:

Move the individual strands of the cable loom to the associated plug connectors 
Put the necessary tool for the side (if needs) 
Put the moun ng material to the side Datum: 03.06.2013 Seite:2 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
rail pressure sensor
1.
1a
Disconnect the plug from the rail pressure sensor. A ach the rail pressure sensor plug to the new loom. Connect the plug of the new loom to the rail pres‐
sure sensor RAIL PRESSURE SENSOR
1b
RAIL PRESSURE SENSOR
Datum: 03.06.2013 Seite:3 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
2. boost pressure sensor
2a
Disconnect the plug from the boost pressure sensor. BOOST PRESSURE SENSOR
A ach the boost pressure sensor plug to the new loom. Connect the plug of the new loom to the boost pressure sensor. 2b
BOOST PRESSURE SENSOR
Datum: 03.06.2013 Seite:4 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
camshaŌ sensor
3.
3a
Disconnect the plug from the camsha sensor. A ach the camsha sensor plug to the new loom. CAMSHAFT SENSOR
Connect the plug of the new loom to the camsha sensor. 3b
CAMSHAFT SENSOR
Datum: 03.06.2013 Seite:5 InstallaƟon instrucƟons
Chrysler / Jeep / Mercedes
3.0 V6
4
tuningbox
4.
Finally install the cable to‐
wards a suitable posi on The plugs must be engage, so that a safe connec on is ensured Fix the cable with cable es Connect the tuningbox to the new loom 5
5. jumper plug
 By using the jumper the vehicle is put in the original condi on.  As soon as you connect the cable loom with the jumper plug the car is in original condi on. Datum: 03.06.2013 Seite:6