Single Ethernet Port VDSL2 Modem
Transcription
Single Ethernet Port VDSL2 Modem
Single Ethernet Port VDSL2 Modem Billion's BiPAC 8600SM - delivering truly cost-effective, high-speed to enhance productivity. VDSL, Very-high-bit-rate Digital Subscriber Line, is the next generation of DSL technology. With accelerated data rates, VDSL delivers high transfer speeds for bandwidthconsuming applications, like voice, video-on-demand, and IPTV services. Billion's BiPAC BiPAC 8600SM 8600SM has integrated VDSL2 technology to provide amazing bandwidth for users who want to fulfill their vision of the digital home or improved office productivity. Due to the characteristics of faster rates and shorter distances offered by VDSL2, it is an ideal and costeffective solution to use fiber optic lines as the backbone and a VDSL line as the last mile into the home or office. Then, ISPs and Telcos (operators and carriers) can deliver more diversified multimedia services to end customers. • Very high speed VDSL2 transmission • Supports 3/4/5 bands • Asymmetric mode up to 100/45Mbps • Suitable for MTU/MDU environments • Easy installation • Ideal for residential users Benefits Very High Speed Data Transmission BiPAC 8600SM complies with the VDSL2 standard. It offers greater bandwidth and a higher downstream rate, up to 100Mbps, for gradually increasing bandwidth-consuming applications. Home users can enjoy smooth media-rich entertainment; SOHO or small business users can enjoy high-quality symmetric and asymmetric Internet access. Bundle Over Existing Copper Wires VDSL operates over copper wires so that telecom operators can provide bundled services to end-users similar to what cable operators offer. With outstanding throughput, the BiPAC 8600SM can complement a fiber network to offer the best solution for delivering IPTV or home entertainment services. Easy Installation The BiPAC 8600SM is easy to install and reduces installation effort and expense. Simply connect the hardware interface without needing any software configuration, it connects users to the Internet because it is fully compliant with all kinds of network protocols. Features & Specifications VDSL Compliance Management • Compliant with VDSL Standard - ITU-T G.993.1 • Compliant with VDSL2 Standard - ITU-T G.993.2 • ANSI T1.424 • ETSI TS 101 270 • China MII • Modulation Method: DMT • Ethernet over VDSL • G.993.2 VDSL2 (Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a support) • Band Plan 997 and 998 support • Supports 3/4/5 bands • Supports up to 100Mbps downstream and 45Mbps upstream • Firmware upgrade through special utility (on demand) Hardware Specifications Physical Interface • DSL: one RJ-11 VDSL port • Ethernet: one RJ-45 10/100 Ethernet port • Reflash button • Power jack • Power switch Physical Specifications • Dimensions: 7.09" x 4.72" x 1.57" (180 mm x 120 mm x 40 mm) Network Protocols and Features Power Requirements • Input: 12 V AC, 1 A • Transparent bridging • Ethernet over VDSL (EoVDSL) Bridging • IEEE 802.3/3u/3x • Flow control in full duplex mode • Back pressure in half duplex mode Operating Environment • Operating temperature: 0 - 40 °C • Storage temperature: -20 - 70 °C • Humidity: 20 - 95% non-condensing Deployment scenario for VDSL using FTTN Residential Home BiPAC 8600SM VDSL DSLAM VDSL2 Internet Fiber ATM or Gigabit Ethernet STB Streaming Media IPTV Deployment scenario for VDSL using FTTB IPTV Building (Hotel / Office) Internet STB VDSL2 (Copper) Fiber BiPAC 8600SM VDSL2 (Copper) VDSL Concentrator ATM or Gigabit Ethernet Streaming Media STB IPTV Note: 1. The modem may require firmware modification for certain VDSL/VDSL2 DSLAMs. 2. Specifications in this datasheet are subject to change without prior notice. V.052407 Billion Electric Co., Ltd. 8F, No. 192, Sec. 2, Chung Hsing Road, Hsin Tien City, Taipei County, Taiwan TEL: +886-2-2914-5665 FAX: +886-2-29186731,+886-2-29182895 E-mail : [email protected] www.billion.com
Similar documents
BiPAC 8200M BiPAC 8200N
Billion BiPAC 8200M VDSL2 Modem/ BiPAC 8200N Wireless-N VDSL2 Firewall Router
More informationVDSL2 100-Mbps Bridge CPE
VDSL2 CPE is placed in each room to split the signal back into Ethernet (data) and POTS/ISDN (voice) for delivery to the end-user. Port selectable data rates allow for a differentiation of services...
More information