Seiko Supercede II
Transcription
Seiko Supercede II
SEIKO Supercede II Patented 100% Internal Free Form Design • Universal blended design provides wide distance and extra wide reading area • Advanced aspheric compensation in the intermediate and near zones • Measured power creates the best vision in the as-worn position • Three corridor lengths: 10/12/14mm, Minimum fitting heights: 14/16/18mm • Large variety of materials in clear, polarized and Transitions® lenses • Made in the USA Advanced aspheric compensation (AAC) in the intermediate and near visual zones optimizes the optical performance in the as-worn position. AAC alters the surface power to deliver the prescribed power when Three corridor lengths are available: 10, 12 and 14mm with minimum fitting heights of 14, 16 and 18mm, respectively. A wide variety of materials is available in clear, polarized and Transitions® lenses. Specifications Name: Supercede II Lens Type: 100% internal free-form progressive Corridor Length: 10/12/14mm Minimum Fitting Height: 14/16/18mm Fitting Point: Lens geometric center Prism: 0.25 to 3.00D Add Power: +0.50 to +3.50 in 0.25D steps Measured Power: Intermediate and near 75 70 65 Distance Ref. Pt. 10mm Fitting Cross Geometric Center Prism Ref. Pt. Materials & Coating Options ClearPolarized Transitions® Transitions®Transitions®Transitions® XTRActive™Sportswear™ Vantage™ 1.50 1.53 (Trivex) 1.59 (Poly) 1.60 1.67 1.74 R R R R R R R R R R R R R R R R R R R R R R R CYLINDER POWER 0.00 .25 .50 .75 -1.00 .25 .50 .75 -2.00 .25 .50 .75 -3.00 .25 .50 .75 -4.00 the lens is positioned in front of the eye. It also reduces aberrations caused by varying vertex distance and compensates for pantoscopic tilt as the eyes converge from the fitting point to the reading area. This “measured power” is printed on the job envelope for easier verification. SPHERE POWER SEIKO Supercede II lenses use a universal blended design that provides wide distance vision and an extra wide reading area. It is a good choice for emerging presbyopes, as well as experienced wearers, and is ideally suited for all add power prescriptions and for those with visually demanding lifestyles. .50 .25 +6.00 .75 .50 .25 +5.00 .75 .50 .25 +4.00 .75 .50 .25 +3.00 .75 .50 .25 +2.00 .75 .50 .25 +1.00 .75 .50 .25 PLANO .25 .50 .75 -1.00 .25 .50 .75 -2.00 .25 .50 .75 -3.00 .25 .50 .75 -4.00 .25 .50 .75 -5.00 .25 .50 .75 -6.00 .25 .50 .75 -7.00 .25 .50 .75 -8.00 .25 .50 .75 -9.00 .25 .50 .75 -10.00 .25 .50 .75 -11.00 .25 .50 .75 -12.00 .25 .50 1.74, 1.67* & 1.60 1.59* & Trivex ® 1.74 -12.50 to +6.50 (total power -12.50) 1.67 -10.50 to +6.50 (total power -10.50) 1.60 -8.50 to +6.50 (total power -8.50) 1.59 & Trivex -7.00 to +5.00 1.50 -5.00 to +4.00 1.50* 1.59* & Trivex® 1.60 1.67* 1.74 Adds: +0.50 to +3.50 in 0.25 steps *Polarized ranges will vary R SEIKO Optical Products of America, Inc. Transitions and the swirl are registered trademarks, and XTRActive, SOLFX, and Vantage are trademarks of Transitions Optical, Inc., Pinellas Park, FL. 575 Corporate Dr., Mahwah, NJ 07430 11545 Encore Circle, Hopkins, MN 55343 www.seikoeyewear.com ©2012 Seiko Optical Products of America, Inc. All rights reserved. 7/2012 07381
Similar documents
SEIKO Perfas Prominent
Non-Linear Progressive Power Change The width of clear vision around the fitting point is increased by 50% Smoothing the power variations from the long-distance zone to the intermediate zone, the w...
More information