6SL7 Series Tubes

　.c
om
6SL7 Series Tubes
Classification- It is a Twin triode. Dome-type bulb of glass, copper ceramic base with eight golden pins.
Application -It intended for use a voltage amplifier or Phase inuerter.
sc
on
n
ex
i
on
Dimensions -Dimensions, outline diagrams of the tube and bases, and the arrangement of electrode
connections to the base terminals are shown in Figures 1, and 2.
rt
Nominal operating conditions and parameters
Heater voltage ……………………………………………………………… 6.3V
Heater current ……………………………………………………………… 0.3A
Plate voltage ………………………………………………………………… 250V
Grid voltage ………………………………………………………………… -2V
Plater resistance ………………………………………………………… 44kohms
Plate current ………………………………………………………………… 2.3mA
Amplification factor …………………………………………………………… 70
Heater-cathode voltage ……………………………………………………… 90V
pa
Characteristics-Average characteristics
Figure 3. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is
alternating-current filament supply.
Limiting Operation Conditions for Safe Nor simultaneous ratings
Maximum plate voltage ………………………………………………… 300 V
Maximum Grid voltage ………………………………………………… -50V
Maximum Grid voltage ………………………………………………… 0V
Maximum Power of plate …………………………………………… 2.5W
Toll Free: 1-866-681-9602 • Local: 905-681-9602 • Fax: 905-631-5777
Shipping Address: 5109 Harvester Rd, Unit B2 • Burlington • Ontario • Canada • L7L 5Y4
Website: www.partsconnexion.com • Email: [email protected]