Interfast Terminal blocks
Transcription
Interfast Terminal blocks
Interfast Terminal blocks Summary D1 - Terminal blocks .......................................................................................................... 200 C D 1 Low Voltage Products & Systems Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 ABB Inc. • 888-385-1221 • www.abb-control.com 199 1SXU 127 010 C0202 Connection of the assemblies To PLC C D 1 Comb-type jumper bar for Led blocks power supply using MA 2,5/5-2CPE... blocks To sensor or actuator Standard pre-wired assemblies Ask for our «Interfast» catalog. Assemblies made on request, consult us. 200 1SXU 127 010 C0202 Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 Low Voltage Products & Systems ABB Inc. • 888-385-1221 • www.abb-control.com Applications Omniconnect connector to PLC 0400 119.05 0400 125.23 0400 125.23 0400 115.21 0400 115.21 0400 115.21 0400 119.05 0400 119.05 0400 125.23 0400 116.22 0400 119.05 0400 125.23 0400 125.23 0400 115.21 0400 115.21 0400 115.21 0400 119.05 0400 119.05 0400 125.23 0400 116.22 D 1 Leds commons through BO Ø5 bus bar Low Voltage Products & Systems Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 ABB Inc. • 888-385-1221 • www.abb-control.com 201 1SXU 127 010 C0202 MA 2,5/5.CPE... Terminal blocks with removable connector - Feed through - Double deck - Heavy duty switchwith blade - With plug fuse holder - compression clamp MA 2,5/5.2CPE... Spacing 5.08 mm .200" Spacing 5.08 mm .200" MA 2,5/5D2.2CPE... MA 2,5/5.SNB...-CPE Spacing 5.08 mm .200" Spacing 5.08 mm .200" DIN 1-3 Mounting on rail DIN 1 and 3, possibility to connect 1 or 2 5,08 mm plugs. Bus bar for Led supply. MA 2,5/5.CPE : standard block. MA 2,5/5.2CPE : standard block. MA 2,5/5-CPE-L24BD : block equipped with 24 V - 4,8 mA green bidirectional LED. MA 2,5/5.2CPE-Pb : block equipped only with o low pin for use with switch or fuse holder block. MA 2,5/5-CPE-AB : block equipped with a zero value resistor for bidirectional leds power supply. End stop End stop End stop Rail Rail Rail Rail th. 9 mm th. 9,1 mm th. 9,1 mm 35 x 7,5 x 1 35 x 15 x 2,3 35 x 15 x 1,5 32 x 15 x 1,5 BADL BAM BAM V0 PR3.Z2 PR4 PR5 PR1.Z2 0399 903.02 0103 002.26 0199 306.03 0174 300.17 0168 500.12 0168 700.22 0163 050.04 V0 V2 V0 D ABB V0 grey body ABB V0 grey body ABB V0 grey body ABB V0 grey body ABB V0 grey body Characteristics 1 Wire size mm² / AWG Rated voltage Rated current Rated wire size Wire stripping length Recommended torque V AC ~ / = DC A 2 mm / AWG mm / inches Nm / Ib.in. Accessories 1 2 grey blue 2 Separator end section (block) grey 3 Separator end section (rail) grey 4 4 5 6 7 5 6 3 8 7 9 10 8 11 12 9 10 13 14 11 12 13 14 15 16 16 17 18 15 Test socket DIA. 2 mm Test device Test plug DIA. 2 mm Preassembled 2 poles jumper bar IP 20 touchproof 3 poles 4 poles not IP 20 5 poles see section accessories 10 poles Jumper bar not preassembled Post + screw + washer Connector plate Comb-type jumper bar 2 poles 10 poles Isolating cover Shielding connector Blocking peg Detachable protection strips End section-flange kit (R+L) Busbar for LED common Coding peg Nr 1 Plug fuse holder Fuse MA 2,5/5-SNB-CPE-AB : block equipped with a zero value resistor for bidirectional leds power supply. Heavy duty switch with black blade. P/N Type P/N Type 0400 107.02 MA 2,5/5.2CPE 0400 127.25 MA 2,5/5D2.2CPE 0400 106.01 MA 2,5/5.SNB-CPE 0400 128.06 MA 2,5/5.CPE.1-L24B 0400 113.27 MA 2,5/5.2CPE.1-L24B 0400 115.21 MA2,5/5D2.2CPE.1-L24B P/N Type 0400 121.27 MA2,5/5.SNB-CPE-L24 D 0400 125.23 0400 123.21 MA 2,5/5.SNB-CPE- B 0400 126.24 MA2,5/5D2.2CPE.1-1L24 D MA 2,5/5.CPE- B 0.2 - 4 0.22 - 2.5 0400 114.20 MA 2,5/5.2CPE.1- B UL CSA 24-12AWG 24-12AWG 320 (3) 300 300 24/12+12 20/10+10 20/10+10 12 AWG 2.5 mm2 12 AWG 8.5 mm / .33" 0.4-0.6 Nm / 3.5-5.3 Ib.in. Type 1 End section MA 2,5/5-SNB-CPE-L24BD : block equipped with 24 V - 4,8 mA green bidirectional LED. Heavy duty switch with black blade. MA 2,5/5.CPE IEC Solid wire Stranded wire MA 2,5/5-SNB-CPE : standard block. Heavy duty switch with black blade. MA 2,5/5D2-2CPE.1-AB/1 : block equipped with a zero value resistor for bidirectional leds power supply on the top level. The bottom level allow polarity distribution. Type Standard blocks LED blocks LED blocks Power supply blocks Power supply blocks MA 2,5/5-2CPE.1-L24BD..... : block equipped with 24 V - 4,8 mA green bidirectional LED. MA 2,5/5D2.2CPE : double deck blocks with 2 independent levels. MA 2,5/5D2-2CPE.1-L24BD : double deck blocks with 24 V - 4,8 mA green bidirectional LED on each level. MA 2,5/5D2-2CPE.1-1L24BD : double deck blocks with 24 V - 4,8 mA green bidirectional LED on top level. The bottom level allow polarity distribution. MA 2,5/5D2-2CPE.1-AB : block equipped with a zero value resistor for bidirectional leds power supply. IEC 0.2 - 4 0.22 - 2.5 320 12 2.5 mm2 0400 122.20 MA2,5/5D2.2CPE.1- B/1 0400 124.22 UL CSA pending pending 24-12AWG 24-12AWG 300 300 10 10 12 AWG 12 AWG 10 mm / .394" 0.4-0.6 Nm / 3.5-5.3 Ib.in. P/N Type FEM6 th.2.8 118 368.16 FEM6 th.2.8 128 368.10 SCF6 th.2.8 118 707.03 SCFM6 th.2.8 114 825.05 SCFEX1 th.2.8 103 619.04 SCFEX3 th.2.8 103 620.01 AL2 12 th.2.8 163 046.24 DCB blue 105 028.21 FC2 007 865.26 BJMI5 12 176 278.16 BJMI5 12 176 279.17 BJMI5 12 176 280.05 BJMI5 12 176 281.22 BJMI5 12 176 282.23 BJS5,08 12 24 poles 177 872.23 EV5 168 629.16 EL6 173 627.21 PC5 113 542.10 PC5 113 544.12 EIP 113 550.24 CBM5 178 745.14 CBM8 178 746.15 COCF32 173 660.16 CPF 5,08 10 poles 199 323.23 FE-BCP th. 5.06 400 094.20 BO05 length 500 177 849.04 0400 116.22 MA2,5/5D2.2CPE.1 AB FE2CPE th.2.8 IEC 0.2 - 4 0.22 - 2.5 320 (3) 12/12 2.5 mm2 UL CSA pending pending 24-12AWG 24-12AWG 300 300 10/10 10/10 12 AWG 12 AWG 10 mm / .394" 0.4-0.6 Nm / 3.5-5.3 Ib.in. P/N Type 215 038.20 FEDCP th.2.8 P/N IEC 0.2 - 4 0.22 - 2.5 320 10 2.5 mm2 UL CSA pending pending 24-12AWG 24-12AWG 300 300 10 10 12 AWG 12 AWG 10 mm / .394" 0.4-0.6 Nm / 3.5-5.3 Ib.in. P/N Type 215 071.21 FE2CPE th.2.8 P/N 215 038.20 AL2 12 th.2.8 163 046.24 DCB blue 105 028.21 FC2 007 865.26 BJMI5 12 176 278.16 BJMI5 12 176 279.17 BJMI5 12 176 280.05 BJMI5 12 176 281.22 BJMI5 12 176 282.23 BJS5,08 12 24 poles 177 872.23 EV5 168 629.16 EL6 173 627.21 PC5 113 542.10 PC5 113 544.12 EIP 113 550.24 AL2 12 th.2.8 163 046.24 DCB blue 105 028.21 FC2 007 865.26 BJMI5 12 176 278.16 BJMI5 12 176 279.17 BJMI5 12 176 280.05 BJMI5 12 176 281.22 BJMI5 12 176 282.23 BJS5,08 12 24 poles 177 872.23 EV5 168 629.16 EL6 173 627.21 PC5 113 542.10 PC5 113 544.12 EIP 113 550.24 AL2 12 th.2.8 163 046.24 DCB blue 105 028.21 FC2 007 865.26 PC5 PC5 EIP 113 542.10 113 544.12 113 550.24 COCF32 CPF 5,08 10 poles FE-BCP th. 5.06 BO05 length 500 COC1 COCF32 CPF 5,08 10 poles FE-BCP th. 5.06 BO05 length 500 COC1 COCF32 CPF 5,08 10 poles FE-BCP th. 5.06 BO05 length 500 COC1 173 660.16 199 323.23 400 094.20 177 849.04 299 777.16 173 660.16 199 323.23 400 094.20 177 849.04 299 777.16 173 660.16 199 323.23 400 094.20 177 849.04 299 777.16 17 18 R R See markers section RC510 RC510 RC510 RC510 1 SC or FE is required with the use of these accessoriesfor isolate each circuit or for a voltage > to 250 V. 2 Use of these accessories requires the cut-out of the block Other accessories see section accessories 202 1SXU 127 010 C0202 body (precut) for blocks MA 2,5/5 .......1. (3) Working voltage : according to Led. Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 Low Voltage Products & Systems ABB Inc. • 888-385-1221 • www.abb-control.com MA 2,5/5-SB-CPE Spacing 5.08 mm .200" MA 2,5/5-SFA...-CPE Spacing 5.08 mm .200" * Bus bar used to common LED's. Use MA 2,5/5...CPE...AB type blocks to polarise the bus bar. Note only for MA 2,5/5-CPE... range : we advise use of "key" accessory with this product. The connectors are mounted in opposite position. MA 2,5/5-CPE-L24BD MA 2,5/5-SB-CPE : switch block with polarized plug (delivered separately). MA 2,5/5-SFA-CPE : switching block with fuse holder for Automotive Mini Fuse. MA 2,5/5-SFA-CPE-L24BD : switching block with fuse holder for Automotive Mini Fuse, equipped with bidirectional green LED 24 V - 4,8 mA. MA 2,5/5-SFA-CPE-AB: switching block with fuse holder for Automotive Mini Fuse, equipped with a zero value resistor for bidirectional leds power supply. MA 2,5/5-CPE-AB MA 2,5/5-SB-CPE 3 15 1 3 1 15 3 bus bar 0400 118.04 MA2,5/5-SFA-CPE-L24 D 0400 119.05 0.2 - 4 0.22 - 2.5 320 10 (4) 2.5 mm2 CSA pending pending 24-12AWG 24-12AWG 300 300 10 (4) 10 (4) 12 AWG 12 AWG 10 mm / .394" IEC MA 2,5/5-2CPE1-AB 0.2 - 4 0.22 - 2.5 320 (3) 3 2.5 mm2 0.4-0.6 Nm / 3.5-5.3 Ib.in. Type FE2CPE th.2.8 CSA pending pending MA 2,5/5D2-2CPE1-AB 2 15 D 5 15 6 4 4 2 15 3 15 1 1 4 3 2 1 1 1 3 2 3 5 4 4 0.4-0.6 Nm / 3.5-5.3 Ib.in. P/N Type 2 5 1 24-12AWG 24-12AWG 300 300 3 3 12 AWG 12 AWG 10 mm / .394" MA 2,5/5D2-2CPE1-1L24BD 15 3 1 4 Double deck block equipped with 24 V - 4,8 mA green bidirectional Double deck blocks with 24 V - 4,8 mA green bidirectional LED LED on each level. on top level. 0400 120.02 UL 1 4 4 3 UL 3 2 3 1 2 IEC 4 bus bar 2 3 Standard block equipped with a zero value resistor. MA2,5/5-SFA-CPE AB 1 15 4 4 P/N 0400 117.23 MA 2,5/5-SFA-CPE Standard block equipped with a 24 V - 4,8 mA green bidirectional LED. 2 1 P/N Type MA 2,5/5-2CPE1-L24BD Standard block equipped with a 24 V - 4,8 mA green bidirec- Standard block equipped with a zero value resistor. tional LED. 2 2 2 Type These blocks are shipped with 10 poles detachable protection strips, designed to protect the male contact pins (not assembled on the blocks). 5 4 6 P/N 215 038.20 FE2CPE th.2.8 MA 2,5/5D2-2CPE1-AB 215 038.20 MA 2,5/5D2-2CPE1-AB/1 MA 2,5/5-SNB-L24BD Double deck block equipped with a zero value resistor on Double deck block equipped with a zero value resistor on Switch block equipped with 24 V - 4,8 mA green bidirectional each level. top level. LED. 2 2 15 15 3 5 3 15 1 5 15 6 DCB blue FC2 105 028.21 007 865.26 FC2 4 2 1 1 3 4 007 865.26 1 2 2 2 1 3 1 3 4 5 4 5 3 6 PC5 PC5 EIP 113 542.10 PC5 113 544.12 PC5 113 550.24 EIP 113 542.10 MA 2,5/5-SNB-CPE-AB 113 544.12 Switch block equipped with a zero value resistor. 113 550.24 COCF32 CPF 5,08 10 poles FE-BCP th. 5.06 BO05 length 500 COC1 FUBS (6) 0.5A FUBS (6) 1A FUBS (6) 2A FUBS (6) 3A FUBS (6) 3A FUBS (6) 5A 173 660.16 199 323.23 400 094.20 177 849.04 299 777.16 174 893.16 174 894.17 174 895.10 174 895.10 174 896.11 174 897.12 173 660.16 199 323.23 400 094.20 177 849.04 299 777.16 179 879.14 179 880.02 RC510 COCF32 CPF 5,08 10 poles FE-BCP th. 5.06 BO05 length 500 COC1 FUAUTO (7) FUAUTO (7) MA 2,5/5-SFA-CPE-L24BD MA 2,5/5-SFA-CPE-AB Fuse block equipped with 24 V - 4,8 mA green bidirectional Fuse block equipped with a zero value resistor. LED. 2 2 15 2 15 1 3 1 3 15 1 3 2 2 2 1 1 1 3 3 3 RC510 (4) Rated current : according the fuse : 5 A max. (5) Plug + solder tags + screws. (6) Soldered fuse. (7) Mini fuse - 32 V max. Low Voltage Products & Systems Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 ABB Inc. • 888-385-1221 • www.abb-control.com 203 1SXU 127 010 C0202 Connection of the assemblies To PLC Comb-type jumper bar for Led blocks power supply using D2,5/5...... AB blocks D 1 To sensor or actuator Power supply and protection commons through interconnection bars Standard pre-wired assemblies Ask for our «Interfast» catalog. Assemblies made on request, consult us. 204 1SXU 127 010 C0202 Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 Low Voltage Products & Systems ABB Inc. • 888-385-1221 • www.abb-control.com Applications Omniconnect connector to PLC 0115 973.12 0115 956.11 0115 956.11 0115 956.11 0115 953.16 0115 976.15 0115 956.11 0115 956.11 0115 956.11 0115 954.17 0115 952.15 0115 951.14 0115 951.14 0115 951.14 0115 952.15 0115 951.14 0115 951.14 0115 951.14 0115 951.14 0115 952.15 PLC power supply To sensors or actuators Commons of sensors/actuators through PCMS comb-type jumper bars Power supply of sensors/actuators commons Power supply of Leds commons PLC power supply Universal blocks To sensors or actuators Relays/optos contacts commons through PCMS comb-type jumper bars Power supply of relays, I/O optos contact commons Relay coils, optos and Leds commons power supply Relays coils, optos and Leds commons through PC2MS comb-type jumper bars Low Voltage Products & Systems Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 ABB Inc. • 888-385-1221 • www.abb-control.com 205 1SXU 127 010 C0202 D 1 D 2,5/5-T3PI-CPE-... Terminal blocks for connector Compression clamp DIN 3 D 2,5/5-SNB-T3PI-CPE-... Spacing 5,08 mm (.200") D 2,5/5-SFA-T3PI-CPE-... Spacing 5,08 mm (.200") Spacing 5,08 mm (.200") 1 1 1 4 4 4 2 2 2 5 3 5 3 5 3 6 6 End stop End stop End stop Rail Rail Rail th. 9 mm th. 9,1 mm th. 9,1 mm 35 x 7,5 x 1 35 x 15 x 2,3 35 x 15 x 1,5 BADL BAM BAM V0 PR3.Z2 PR4 PR5 V0 V2 V0 0399 903.02 0103 002.26 0199 306.03 0174 300.17 0168 500.12 0168 700.22 D 1 Max. working temperature version without LED : 100°C version with LED : 85°C Contact resistance : < 5 mΩ D 2,5/5-SNB-T3PI-CPE D 2,5/5-SFA-T3PI-CPE D 2,5/5-T3PI-CPE-AB D 2,5/5-SNB-T3PI-CPE-AB D 2,5/5-SFA-T3PI-CPE-AB D 2,5/5-T3PI-CPE-L24BD D 2,5/5-SNB-T3PI-CPE-L24BD D 2,5/5-SFA-T3PI-CPE-L24BD Type Part numbers Grey V0 Voltage Current Wire size Wire stripping length Recommended screwdriver Recommended torque Protection Solid wire Stranded wire D 2,5/5-SNB-T3PI-CPE 0115 972.11 D 2,5/5-SFA-T3PI-CPE 0115 974.13 D 2,5/5-SNB-T3PI-CPE-AB 0115 954.17 D 2,5/5-SFA-T3PI-CPE-AB 0115 975.14 D 2,5/5-T3PI-CPE-L24BD 0115 956.11 D 2,5/5-SNB-T3PI-CPE-L24BD 0115 953.16 D 2,5/5-SFA-T3PI-CPE-L24BD IEC UL/CSA IEC UL/CSA 0,2-4 mm² 0,22-2,5 mm² 24-12 AWG 24-12 AWG 0,2-4 mm² 0,22-2,5 mm² 320 V 4 kV 3 12 A 2,5 mm² 300 V 320 V 4 kV 3 10 A 2,5 mm² 10 A 12 AWG Part numbers 10 poles CPF 5,08 CPMS 20 (4) CPMS 34 (4) 0199 323.23 0205 227.01 0206 163.02 4 7 8 11 9 10 14 Separator R See section on marking 12 14 13 206 1SXU 127 010 C0202 9 10 11 12 13 Blocking peg Coding peg Nr 1 End section-flange kit (R + L) Comb type jumper bar Jumper bar orange IP20 - 24 A Test device Test plug ATO fuse-holder plug black ATO fuse-holder plug black Mini Fuse - 32 V max. R COCF 32 COC1 FEMS PCMS V0 2 to 22 poles 34 poles PC2MS DCB FC2 (3) blue DIA. 2 see next pages 0400 169.17 0400 171.01 0105 028.21 0007 865.26 0400 172.02 SCMS Marking method 0173 660.16 0299 777.16 0400 110.00 5 24-12 AWG 24-12 AWG 0,2-4 mm² 0,22-2,5 mm² 24-12 AWG 24-12 AWG 300 V 320 V 4 kV 3 10 A 2,5 mm² 300 V pending 10 mm / .394" 3,5 mm / .137" 0,4-0,6 Nm / 3,5-5,3 lb.in IP 20 / NEMA1 (5) COCF 32 COC1 FEMS PCMS V0 2 to 22 poles 34 poles PC2MS DCB FC2 (3) blue DIA. 2 0199 323.23 0205 227.01 0206 163.02 0205 805.06 0205 361.17 0206 164.03 0173 660.16 0299 777.16 0215 368.17 see next pages 0400 169.17 0400 171.01 0105 028.21 0007 865.26 0400 172.02 SCMS 10 A 12 AWG 10 mm / .394" 3,5 mm / .137" 0,4-0,6 Nm / 3,5-5,3 lb.in IP 20 / NEMA1 (5) Part numbers 10 poles CPF 5,08 CPMS 20 (4) CPMS 34 (4) 12 poles RTMS 34 poles 4 5 6 7 8 UL/CSA 10 A 12 AWG Type 0115 976.15 IEC pending 20 poles 6 Part numbers 0115 955.10 Type 5 Type Grey V0 0115 973.12 10 mm / .394" 3,5 mm / .137" 0,4-0,6 Nm / 3,5-5,3 lb.in IP 20 / NEMA1 (5) 1 Detachable protection strips 2 12 or 20 poles cover 34 poles cover 3 Label for CPMS cover 3 Part numbers D 2,5/5-T3PI-CPE-AB Rated Pulse Pollution degree Rated Rated / Gauge Accessories 2 Type Equipped with a green 2 direction LED 24 V - 4,7 mA Grey V0 pending Wire size 1 Equipped with a green 2 direction LED 24 V - 4,7 mA D 2,5/5-T3PI-CPE Characteristics Compression clamp center of rail D 2,5/5-T3PI-CPE Equipped with a green 2 direction LED 24 V - 4,7 mA Observations 6 center of rail open blade center of rail Type Part numbers 10 poles CPF 5,08 CPMS 20 (4) CPMS 34 (4) 12 poles RTMS 20 poles 34 poles COCF 32 COC1 FEMS PCMS V0 2 to 22 poles 34 poles PC2MS blue DCB (3) DIA. 2 FC2 BF5 AUTO V0 (6) BFMS AUTO V0 FUAUTO 2A FUAUTO 3A FUAUTO 5A SCMS 5 0199 323.23 0205 227.01 0206 163.02 0205 805.06 0205 361.17 0206 164.03 0173 660.16 0299 777.16 0215 368.17 see next pages 0400 169.17 0400 171.01 0105 028.21 0007 865.26 0299 877.03 0399 170.16 0179 879.14 0179 880.02 0211 277.00 0400 172.02 5 (3) Solely on the top stage. (4) Sticks to the end section-flanges 6. (5) IP20 block with detachable protection strips, to order separately. (6) Do not use with CPMS cover on. Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 Low Voltage Products & Systems ABB Inc. • 888-385-1221 • www.abb-control.com D 2,5/5-UNI-CPE-... Terminal blocks for connector Compression clamp DIN 3 BNMS Spacing 5,08 mm (.200") Model 1 plugs Input optocoupler plugs (See Characteristics on the next pages) 1 4 2 5 3 6 center of rail 5 V DC 24 V DC 48 V DC 125 V DC 24 V AC 48 V AC 115 V AC 230 V AC BNMS BNMS BNMS BNMS BNMS BNMS BNMS BNMS T5V-1 T24V-1 T48V-1 T125V-1 T24V-1 T48V-1 T115V-1 T230V-1 0031 831.03 0031 800.21 0031 801.16 0031 845.11 0031 802.17 0031 803.10 0031 804.11 0031 805.12 Output optocoupler plugs (See Characteristics on the next pages) 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V AC D 2,5/5-UNI-CPE End stop End stop End stop Rail Rail Rail th. 9 mm th. 9,1 mm th. 9,1 mm 35 x 7,5 x 1 35 x 15 x 2,3 35 x 15 x 1,5 BADL BAM BAM V0 PR3.Z2 PR4 PR5 V0 V2 V0 0399 903.02 0103 002.26 0199 306.03 0174 300.17 0168 500.12 0168 700.22 Max. working temperature version without LED : 100°C version with LED : 85°C Contact resistance : < 5 mΩ 1 RT Type Part numbers D 2,5/5-UNI-CPE 0115 952.15 D 2,5/5-UNI-CPE-L24BD 0115 951.14 Order plugs separately (see next column) IEC UL/CSA 0,2-4 mm² 0,22-2,5 mm² 24-12 AWG 24-12 AWG 320 V 4 kV 3 6A 2,5 mm² 300 V Characteristics Wire size Voltage Current Wire size Wire stripping length Recommended screwdriver Recommended torque Protection Solid wire Stranded wire Rated Pulse Pollution degree Rated Rated / Gauge Type 1 Detachable protection strips 2 12 or 20 poles cover 34 poles cover 3 Label for CPMS cover Part numbers 10 poles CPF 5,08 CPMS 20 (4) CPMS 34 (4) 12 poles RTMS 20 poles 34 poles 5 6 4 8 7 4 5 6 7 8 Blocking peg Coding peg Nr 1 End section-flange kit (R + L) Comb type jumper bar Jumper bar orange IP20 - 24 A 9 Test device 10 Test plug 11 Plugs COCF 32 COC1 FEMS PCMS V0 2 to 22 poles 10 poles PC2MS 34 poles DCB FC2 BNMS (3) blue DIA. 2 0199 323.23 0205 227.01 0206 163.02 0205 805.06 0205 361.17 0206 164.03 0173 660.16 0299 777.16 0400 110.00 see next pages 0400 110.00 0400 171.01 D 2,5/5-UNI-CPE compatible 10 11 D 2,5/5-UNI-CPE-L24BD compatible with model 1 12 Separator R See section on marking 12 125 V / 125 mA 125 V / 500 mA 125 V / 2 A 125 V / 5 A 250 V / 125 A 250 V / 2 A 250 V / 5 A 0031 820.14 BNMS BNMS BNMS BNMS BNMS BNMS BNMS F125mA-1 F250mA-1 F2A-1 F5A-1 F125mA-2 F2A-2 F5A-2 0031 821.01 0031 838.12 0031 822.02 0031 823.03 0031 824.04 0031 825.05 0031 826.06 D 1 Fuse plug (See Characteristics on the next pages) 125 V / 125 mA 250 V / 125 mA BNMS F125mA-3 BNMS F125mA-4 0031 827.07 0031 828.10 R Low Voltage Products & Systems 0400 172.02 SCMS Marking method Strap plug (See Characteristics on the next pages) BNMS ST1 BNMS ST2 5 5 V DC 5 V DC 48 V DC 48 V DC 5 V DC 5 V DC 5 V DC 5 V DC 100 mA 100 mA 100 mA 100 mA 2A 2A 1A 1A BNMS BNMS BNMS BNMS BNMS BNMS BNMS BNMS N5V-3 P5V-3 N48V-3 P48V-3 N5V-1 P5V-1 N5V-2 P5V-2 0031 806.13 0031 809.26 0031 808.25 0031 811.07 0031 812.00 0031 814.02 0031 816.04 0031 818.16 Converter plug (See Characteristics on the next pages) 0 - 20 mA 4 - 20 mA 0 - 20 mA 4 - 20 mA : : : : : : 0 - 10 V 2 - 10 V 0-5V 1-5V BNMS BNMS BNMS BNMS CAI/U-500 CAI/U-500 CAI/U-250 CAI/U-250 0031 832.04 0031 832.04 0031 833.05 0031 833.05 White Grey Ivory Yellow Red Black (3) Solely on the top stage. (4) Sticks to the end section-flanges 6. (5) IP20 block with detachable protection strips, to order separately. (6) Do not use with CPMS cover on. Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 ABB Inc. • 888-385-1221 • www.abb-control.com 0031 829.11 0031 830.16 Output optocoupler plugs (See Characteristics on the next pages) 0105 028.21 0007 865.26 with model 1 et 2 9 BNMS R24V-1 Model 2 plugs 6A 12 AWG 10 mm / .394" 3,5 mm / .137" 0,4-0,6 Nm / 3,5-5,3 lb.in IP 20 / NEMA1 (5) Accessories 3 0031 807.14 0031 810.12 0031 813.01 0031 815.03 0031 817.05 0031 819.17 0031 839.13 pending Compression clamp 2 N24V-3 P24V-3 N24V-1 P24V-1 N24V-2 P24V-2 A24V-4 Fuse plug (See Characteristics on the next pages) Grey 1 BNMS BNMS BNMS BNMS BNMS BNMS BNMS Relay plug (See Characteristics on the next pages) D 2,5/5-UNI-CPE-L24BD Equipped with a green LED 4,7 mA Observations 100 mA 100 mA 2A 2A 1A 1A 1A 207 1SXU 127 010 C0202 COMB TYPE JUMPER BAR INSTALLATION NOTE : It is recommended to install the comb type jumper bar before mounting the terminal boards on the rail. Make sure that the screws are completely loosened. interfast MS 1 - Insert the comb type jumper bar into the compression clamp hole and push in upper position. 3 - Snap the terminal board on the rail. Connect the wires if necessary, and lock the comb type jumper bar with all the screws. 2 - Push the comb type jumper bar right against the terminal boards. No of poles Type GREY RED BLUE YELLOW/GREEN 12 BFMS-12 0205 531.22 0205 532.23 0205 533.24 0205 534.25 20 BFMS-20 0205 563.02 0205 564.03 0205 565.04 0205 566.05 Standard comb type jumper bar : MAINTENANCE A - Shunt use B - Cover opening / closing To separate the shunt, cut it on both sides of the indicated zone. Throw away the useless pieces. D Opening 1 - Push lightly in the direction of the arrows. 2 - Open the cover according to the arrow. 1 Closing 3 - Close the cover according to the arrow. 1 - Push ligh tly in the direction of the arrows. Each shunt end has to be flanked by a separator 1 or an end section 2 . D - Plug description Opto coupler output with negative field voltage N... Red plug Opto coupler output with positive field voltage C - Plug extraction T... P... Red plug 1 - Insert the screwdriver in the slot and lever out right or left to extract the plug. DC input opto coupler White plug AC input opto coupler Output relay R24V... Ivory plug T... Yellow plug Fuse A... Black plug 208 1SXU 127 010 C0202 F... Grey plug Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, 800-349-5827 Low Voltage Products & Systems ABB Inc. • 888-385-1221 • www.abb-control.com
Similar documents
Terminal Blocks entrelec®
The range is certified to the highest possible certification level of the new ATEX 94/9/EC European directive and offers maximized safety to offer you true security products.
More informationMM100 Instruction Manuals
AC/DC voltage, DC current, and resistance. It can also test batteries, diodes, and continuity. Operating Altitude: 2000 meters Relative Humidity: 75% max operating Operating Temperature: 0°C / 32°F...
More informationEntrelec Catalog
M 6/12.FF.1 V0 White body V0 - with nuts M 6/12.FF V0 Grey body - without nuts M 6/12.FF
More information