Terminal Blocks entrelec®

Transcription

Terminal Blocks entrelec®
Main catalogue
Terminal Blocks entrelec®
Explosive Atmospheres Protection
T07100
Terminal Blocks entrelec®:
The best in connection
Introducing the new ATEX certified
terminal block range
The following pages are meant to provide you with some
basic information relative to the ATEX directive and protection
methods particularly suitable for terminal blocks.
We insist on the increased demand for safety required by
the ATEX directive and describe what has been the design
and manufacturing choice of ABB to provide you with true
security products.
A
1
As one of the world leaders in connection technology, ABB
is pleased to introduce you to its dedicated terminal block
range for safe use in explosive atmospheres.
The range is certified to the highest possible certification
level of the new ATEX 94/9/EC European directive and offers
maximized safety to offer you true security products.
Comprehensive range
Safe use and Applications
The ATEX terminal block range provides terminal blocks in
the three main technologies: screw clamp, spring clamp and
ADO system® in feed through (grey), neutral (blue) and ground
versions. ABB ATEX terminal block range is available in V0
(per UL94) material.
As we are constantly extending our product portfolios, please
do not hesitate to contact your local sales if you would like
to request an ATEX certified terminal block not mentioned
in these pages.
ABB’s dedicated ATEX range is designed and certified for
use in all industries with potentially explosive atmospheres
caused by gas or dust inflammation such as: petrochemical
industries, off shores installations, mines industries, flour
mills, silos … etc…
T07100
Atex generalities
A
1
Contents
A. Explosive atmosphere......................................................................................................2
B. European explosion directives.........................................................................................
4
C. ATEX 94/9/EC conformity assessment procedures.........................................................
8
D. Protection methods in potentially explosive atmosphere................................................
10
E. entrelec terminal blocks & accessories certifications...................................................
12
ATEX certified terminal blocks range
Summary..............................................................................................................................
13
T07100
A. Explosive atmosphere
Conditions
An explosion can occur if the following factors are
combined:
A
Presence of inflammable substances
Presence of an ignition source or inflammation source:
fire, flame, electrical or mechanical sparks, overheated
surfaces, electrostatic discharges
1
Oxygen
Inflammable substances can be listed as
follow:
Inflammable gas
Inflammable liquid
Inflammable dust
Liquid gas: butane, butene,
propane, propylene
Solvents
Coal
Fuel
Wood dust
Smoke: carbon monoxide,
methane
Oil
Human and animal food : sugar, flour,
cereal...
Chemical gas substances :
acetylene, acetylene oxide,
vinyl chloride
Heating oil
Painting
Plastic material
Chemical substances
Metal
Ignition source:
Protection:
Electrical energy may be dangerous if used close to an
inflammable substance as it is considered as a potential
source of ignition. Indeed, sparks, arcs or dangerous
temperature levels are generated by the electrical energy.
Particular methods of protection have thus been investigated
in order to allow the use of electrical equipment in hazardous
areas.
Concerned industries
The risk of explosion is particularly high in certain types of
industries, which generate inflammable gas, inflammable
liquid or inflammable dust. Indeed, the new ATEX directive
now considers the explosion risk caused by dust.
We can list:
Refineries,
Petrochemical and chemical industries,
Off shore installations,
Mining industries,
Human and food industries…
T07100
A. Explosive atmosphere
(cont.)
A
1
The risk can be expressed as follow:
Industries
Risks
Refineries
Treatment of hydrocarbon highly inflammable
Petrochemical and chemical
industries
Transformation and treatment processes which can generate explosive mixing
Pharmaceutical and cosmetic
industries
Use of alcohol highly inflammable like solvents
Use of active material or adjuvant which can create explosive dust
Paper or plastic dust
Waste and water recycling industries
Storage of barrels or containers partially or not emptied
Gas fermentation emission during water treatment
Painting facilities
Over spray formation during the lacquering of surfaces with spray gun
Gas distribution
Transport and stocking of cereal, powder… which can create potentially dust
explosive atmospheres in filters and aerators
Human and animal food industries
Metal dust generation during metal polishing which can create dust explosive
atmospheres in collectors
Wood saw mills, metal machining
Génération de poussières métalliques lors du polissage des métaux qui peuvent
créer une atmosphère explosible dans les collecteurs
T07100
B. European explosion directives
ATEX European directive consists in two parts :
A
ATEX 94/9/EC (generally called ATEX 95), which
concentrates on the duties of the manufacturers.
1
ATEX 1999/92/EC (generally called ATEX 137), which
focuses on the end users obligations.
* Directive applicable to
entrelec® terminal blocks
The objectives of the directives
"Minimum requirements" is a key phrase of the directives member states are free to introduce more stringent measures
if they wish.
ATEX belongs to the group of the so-called "new approach"
directives.
Under a new approach directive, any route towards achieving
the objective is permitted.
The European commission will not interfere with how a
technical solution is reached, but gives all parties involved the
freedom to define the best means, methods and procedures
to meet the guidelines.
This gives rise to a division of responsibilities between the
equipment manufacturer and the end user.
The less responsibility the equipment manufacturer assumes
for achieving the solution, the more the end user will have to
take on, and vice versa.
T07100
B. European explosion directives
(cont.)
ATEX 95: Equipments and components
ATEX 137: Installations
The objective of the ATEX 95 directive is to reinforce safety
aspects. It is more restricting than the former directive 76/117
EEC, as it does not only concentrate on the product but on the
whole process.
The addition of the new "workers directive ATEX 137" reinforces the
safety level even further.
The manufacturer’s quality assurance is now audited through the
relevant standard NF EN 13980 Potentially explosive atmospheres
- Application of quality systems.
Extract of the EN 13980 §7.5.3: The manufacturer shall establish and
maintain procedures for product identification during all the stages
of production, testing, final inspection and placing on the market.
Traceability is required with respect to final product and its
significant parts.
The "production quality assurance notification" is the highest
assurance quality certification level achievable.
Risk analysis: requires that the employers draw up evidence of risk
analysis for their site.
Area classification: area classification into zones and site inspections
must be carried out where potentially explosive atmospheres may
develop.
Explosion protection document: Information such as written
instructions, training programs, and clearance for work… must be
defined in the "explosion" protection document" and respected in
order to guarantee the protection of the staff.
ATEX certified products must be selected according to zone.
Locations where explosive atmospheres may occur and identified
through warning signs.
ATEX products are considered as safety devices: the entire
process from the design to the installation must be strictly
controlled.
Product and company quality assessment which allow
design, manufacturing and sales.
ABB commitments versus ATEX 137
Requirements in terms of organization for designing,
manufacturing and selling.
Reliable product information is given to the end user: increased
safety and intrinsic safety certified terminal blocks for safe
installation.
ABB commitments versus ATEX 95
Terminal blocks are unitary controlled - unitary dielectric
control on finished product
Maximized security is guaranteed through dedicated
manufacturing processes, dedicated manufacturing sites
and dedicated inventory locations .
Reinforced traceability for accurate identification of the
ATEX customers through dedicated part numbers for the
ATEX range and batch number registration.
Dates of enforcement
ATEX 95: Equipment and components
From July 1st 2003, equipment, protection systems and electrical
components used in potentially explosive atmospheres must
comply with the European directive ATEX 94/9/EC (ATEX 95).
ATEX 95 abrogates the directive 76/117/EC and becomes
mandatory for all new equipment installed after 06/30/03.
Former Ex products, already in stock, can still be installed if
they are to replace used parts in already active installations.
Excellence of ADO system® in regards to the ATEX 137 minimum
requirements (training programs, written instructions, clearance
for work…):
- Simplified "clearance for work": no possibility of unauthorized
modifications thanks to the ADO system® dedicated tool
(OUMAD, OUPAD or OUTAD) .
- Maximized "correct installation and operation, qualification
of the personnel": the ADO system® connection is operator
independent.
- No retightening maintenance: ADO system ® is a Screwless
technology.
Dates of enforcement
ATEX 137: Installations
The ATEX 1999/92/EC (ATEX 137) directive becomes mandatory for all
new installations implemented after 06/30/03, in every country member
of the EEC. For existing installations, three more years are given to fulfill
the minimum requirements.
If an old work place is upgraded, modified or extended, it must comply
with the "minimum requirements" immediately.
A
1
T07100
B. European explosion directives
(cont.)
Definitions and terms
Equipment and components used in potentially explosive
atmospheres are divided into groups and categories.
(Atex 94/9/EC, chapter 1, art 1, § 3c)
A
This classification is meant to define clearly the "intended
use" of equipment, protective systems and devices, which is
considered of prime importance for safe operation.
1
Groups
Two distinct groups according to the industry type in which
the equipments or components are to be used:
Categories
ATEX defines "categories of equipment", specified by their
protection characteristics:
For Mine industries:
- Category M 1: very high level of safety
- Category M 2: high level of safety
Group I stands for Mine industries:
For surfaces industries:
Underground part of mines and surface installations
of such mines, liable to be endangered by firedamp
and / or combustible dust.
- Category 1: very high level of safety
Group II stands for Surface industries:
- Category 2: high level of safety
- Category 3: normal level of safety
All other places liable to be endangered by explosive
atmospheres.
?
Frequently asked question:
If equipment is certified in category 1, is it certified in
category 2 ?
Equipment or components certified in category 1 are also
certified in category 2 and category 3 since category 1 is the
highest level of safety.
T07100
B. European explosion directives
(cont.)
Equipment in category:
Intended use:
M1 (Mine industries)
Is required to remain functional, even in the event of
rare incidents relating to equipment, with an explosive
atmosphere present.
In underground parts of mines as well as those parts of
surface installations of such mines endangered by firedamp
and/or combustible dust.
A
M2 (Mine industries)
Is intended to be de-energized in the event of an explosive
atmosphere. The means of protection relating to equipment
in this category assure the requisite level of protection
during normal operation and also in the case of more severe
operating conditions, in particular those arising from rough
handling and changing environmental conditions.
In underground parts of mines as well as those parts of
surface installations of such mines endangered by firedamp
and/or combustible dust.
1
1 (Surface industries)
Must ensure the requisite level of protection, even in
the event of rare incidents relating to equipment and is
characterized by means of protection such that:
- Either, in the event of failure of on
means of protection, at least an
independent second means provides
the requisite level of protection.
Zone 0 and Zone 20:
Areas in which explosive atmospheres caused by mixtures
of air and gases, vapors or mists or by air/dust mixtures are
present continuously, for long periods or frequently.
- Or the requisite level of protection is
assured in the event of two faults
occurring independently of each
other.
2 (Surface industries)
Must ensure the requisite level of protection, even in the
event of frequently occurring disturbances or equipment
faults which normally have to be taken into account.
Zone 1 and Zone 21:
Areas in which explosive atmospheres caused by mixtures
of air and gases, vapors or mists or by air/dust mixtures are
likely to occur.
3 (Surface industries)
Ensure the requisite level of protection during normal
operation.
Zone 2 and Zone 22:
Areas in which explosive atmospheres caused by gases,
vapors or mists or by air/dust mixtures are unlikely to occur
or are likely to do so only infrequently and for a short period
only.
Atex 94/9/EC annex I
0 and 20 zones
1 and 21 zones
2 and 22 zones
Explosive atmospheres classification example
T07100
C. ATEX 94/9/EC conformity assessment
procedures
The ATEX certification process can be identified as two main
parts:
The EC type examination certificate confirms that the
validity of the technical file established by ABB is in
conformity with the Atex directive. Examination and test
results of the product are been examined by a notified
body.
A
1
The inspection of quality assurance, conducted by a
notified body: refers to the production or product quality
assurance examination (depending upon the product level
of certification).
The notification has three years validity with yearly audit.
As said in chapter B, ATEX directives objective is to increase
the safety.
Therefore, a quality assurance audit is now necessary to obtain
the ATEX certification for any equipment or component.
Complete conformity assessment procedure is detailed here
below:
Atex 94/9/EC chapter II, article 8
ABB certification conformity
"Production Quality Insurance" inspection
"EC type examination certificate"
Notified bodies
"Notified Bodies", are independant bodies which are
appointed by the Member States. They have the relevant
expertise and facilities to undertake the required procedures
such as :
"Type Examination", which involves an assessment made
of the product against the Essential Health and Safety
Requirements of the Directive.
Report of the manufacturer's Quality Assurance
procedures to ensure that the "type" will continue to
comply with the requirements.
These "Notified Bodies" are given a number and are listed
in the OJEC by the European Commission prior to their
operation; the activities of the Notified Bodies are a matter for
Member States, as they are appointed under their authority.
While the Notified Body has various responsibilities under the
Directive, the manufacturer always remains responsible for
the compliance of the equipment.
T07100
C. ATEX 94/9/EC conformity assessment
procedures. (cont.)
A
1
Production quality assessment notification
Extract list of European Notified bodies and Certified
bodies:
Country
Name
Denmark
France
Germany
Notified Bodies
(ATEX 94/4/EC)
Certified Bodies
(IECEx)
DEMKO
X
X
INERIS
X
LCIE*
X
X
PTB
X
X
X
TÜV
Italy
CESI
X
Netherland
KEMA
X
Norwaye
NEMKO
Sweden
SP
X
X
UK
SIRA
X
X
*LCIE: identification code 0081
Subsidiary of Bureau Veritas group
EC type examination certificate
T07100
D. Protection methods in potentially
explosive atmosphere
Protection methods are to be implemented so that equipment
and electrical components can be used in a potentially
explosive atmosphere.
Safety methods:
A
1
Protection types
Principles
Ex d: flame-proof
Contains the explosion in an appropriate explosion proof housing.
Ex e: increased
Increases the reliability of the electrical components so that sparks or arcs cannot
appear. Ex e voltage to apply is determined through severe limitations in the
calculations of clearance and creepage distances.
Ex i: intrinsic
Reduces the energy to a very low energy level so that even sparks or arcs cannot
ignite an explosion atmosphere.
Ex m, Ex o, Ex p or Ex q
Prevent contact between the electrical component and the explosive atmosphere
Applications for Ex d, Ex e and Ex i
protection types
Flameproof protection Ex d
Intrinsic protection Ex i
Among the several protection methods, flameproof
"Ex d" protection method is the most ancient and therefore
represents the protection method the most implemented.
Intrinsic protection is a common method of protection for
instrumentation and control; it applies to an entire circuit.
Non-ATEX certified terminal blocks could be installed in
a flameproof enclosure: the protection against explosion
propagation is ensured by the enclosure not by the terminal
block itself.
However, as it requires a very specific design (the enclosure
must be capable of withstanding a possible internal
explosion), this solution appears over costly for terminal
block installations.
Blue is generally the colour code for the intrinsic circuit
components. It is the only protection method that can
be implemented in zone 0 or 20 (permanent presence of
explosive atmosphere), as the allowed voltage and current
are extremely low.
Voltage and current calculations are necessary to ensure
that the circuit composed of its several components will
operate safely.
Increased protection Ex e
Increased protection remains the best economical and
technical choice for a safe use of terminal blocks in hazardous
locations.
ABB ATEX terminal block range, certified in increased
safety, requires a high level of construction technology
and do not require an explosion proof (Ex d) enclosure
to operate safely in an explosive atmosphere.
Please note that the enclosure containing the terminal blocks
must offer a Dust protection (IP6X minimum) and be Ex e
certified itself in order to determine the maximum surface
temperature in the housing (calculations consider the number
of terminal blocks in the housing and current to be applied)
10
ABB supplies intrinsic and increased protection certified
terminal blocks, even if the intrinsic certification is not
mandatory for components.
The reasons are added benefits for our customers:
it allows us to supply you with the ATEX appropriate
group and category marked on the block as well as the
Ex i necessary voltage calculations, which have been
confirmed by a notified body.
T07100
D. Protection methods in potentially
explosive atmosphere (cont.)
Terminal blocks use
Here below are the protection methods, for which the ATEX
certification applies to terminal blocks.
A
1
(*certification is not mandatory for components used in
intrinsic protection only)
Normes EN
Méthodes de protection
EN 60079-0
General rules
EN 60079-7
Increased safety
e
No sparks or arcs in normal use. Control of
dangerous temperature levels : because they can
generate arcs or sparks in normal use, switch
or fuse terminal blocks cannot be classified in
increased protection.
Intrinsic safety
i
Control of sparks, arcs or overheating through a
very low energy level
EN 50020
Symbole
Concepts
11
T07100
E. Entrelec terminal blocks &
accessories certification
ATEX Terminal block range
certification level
A
1
Ex e IM2 and II2GD
and
Ex i IM1 and II1GD
The ABB attestation of conformity guarantees the end user
the conformity of the product in regards with the ATEX 95
directive and applicable standards. It is generic to the whole
ATEX range.
Accessory certification
Entrelec terminal block accessories are automatically ATEX
certified.
Please refer to the catalogue pages for the accessory list
per terminal block.
Some accessories like jumper bars or shielding connectors
may declass the terminal block voltage.
The detailed voltage is not indicated in the EC type
examination certificate -the examination certificate, issued
by the notified body, is meant to establish the ATEX terminal
block conformity only-.
Technical instruction sheets are at your disposal with all data
for the appropriate voltage values as well as the operation
and maintenance instructions.
Please request them from your local sales.
example of terminal blocks technical instruction sheet
12
T07100
ATEX certified
Terminal blocks range
A
1
Contents
Screw clamp connection DIN 1 - 3
Standard and ground terminal blocks..................................................................................
14
Double-deck terminal blocks...............................................................................................
17
Three level sensor terminal blocks.......................................................................................
18
Safety connection terminal blocks.......................................................................................
19
Thermocouple terminal blocks.............................................................................................20
Power terminal blocks.......................................................................................................21
Screw clamp terminal blocks DIN 2.................................................................................24
Spring clamp DIN 3
Standard and ground terminal blocks..................................................................................25
Spring clamp miniblocks DIN 2 and base mount ...........................................................29
ADO - Screw clamp DIN 3
Standard and ground terminal blocks..................................................................................
30
Double-deck terminal blocks...............................................................................................
32
ADO - ADO connection DIN 3
Standard and ground terminal blocks..................................................................................
33
Double-deck terminal blocks...............................................................................................
35
Screw clamp - ADO connection miniblocks DIN 2 - 3 and base mount........................
36
ADO - ADO connection miniblocks DIN 2 - 3 .................................................................
38
Index....................................................................................................................................
39
13
T07074
MA 2,5/5...Ex
Standard and ground
Terminal blocks
Screw clamp
M 4/6...Ex
Spacing 5 mm .200"
M 4/6.3A...Ex
Spacing 6 mm .238"
Spacing 6 mm .238"
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on
DIN 3 rail. The use of
ground terminal blocks do not
decrease the standard terminal
block's voltage ratings.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
1
End stop
End stop
Rail
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
PR1.Z2
V0
V0
Standard 5 mm block
Standard 6 mm block
MA 2,5/5.P.Ex
M 4/6.P.Ex
Spacing 5 mm .200"
Grey body
Blue body
Green body
Yellow body
Green/yellow body (without rail contact)
Green/yellow body (with rail contact)
2.5 mm2
300 A / 1 s
Accessories
1
2
4 mm2
480 A / 1 s
12 AWG
grey
blue
yellow
orange
green
FEM6 V0
FEM6 V0
FEM6 V0
FEM6
FEM6
2 Circuit separator
3 Separator end section (block)
4 Separator end section (rail)
grey
grey
grey
SCMA5
SCF6
SCFM6
8 Preassembled
jumper bar IP 20 touchproof
2 poles
3 poles
4 poles
5 poles
10 poles
BJMI5 (1)
BJMI5 (1)
BJMI5 (1)
BJMI5 (1)
BJMI5 (1)
EL6
BJS5 (1)
EV5
•
•
•
•
•
th. 2,8
th. 2,8
th. 2,8
th. 2,8
th. 2,8
th. 3
th. 3
P/N
M 4/6.3A.Ex
M 4/6.3A.N.Ex
M 4/6.4A.Ex
M 4/6.4A.N.Ex
IEC
1SNA 146 010 R2300
1SNA 146 011 R1000
1SNA 146 012 R1100
1SNA 146 013 R1200
UL
NFC DIN
22-10AWG
0.2 - 4
0.22 - 4
22-10AWG
10 AWG
4 mm2
10 AWG
9.5 mm / .37"
0.5-0.8 Nm / 4.4-7.1 Ib-in
Exe : 750 V
Exi : 375 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0014U
P/N Type
Type
End section
UL
0.2 - 4
0.22 - 4
10 mm / .39"
0.4-0.6 Nm / 3.5-5.3 Ib-in
Exe : 750 V
Exi : 90 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0025U
ATEX certificate
1
IEC
1SNA 146 001 R2700
1SNA 146 002 R2000
1SNA 146 245 R0700
1SNA 146 285 R2000
1SNA 146 237 R2700
1SNA 146 023 R1400
NFC DIN
0.2 - 4
22-12 AWG
0.22 - 2.5
mm² / AWG
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
3
UL
NFC DIN
Rigid
Flexible
P/N Type
1SNA 146 014 R1300 M 4/6.Ex
1SNA 146 015 R1400 M 4/6.N.Ex
M 4/6.Ex
M 4/6.Ex
1SNA 146 240 R1600 M 4/6.PI.Ex
1SNA 146 016 R1500 M 4/6.P.Ex
MA 2,5/5.PI.Ex
MA 2,5/5.P.Ex
Standard 6 mm block
One circuit and four clamps
Terminal block for ground wire.
P/N Type
MA 2,5/5.Ex
MA 2,5/5.N.Ex
IEC
Characteristics
Wire size
Spacing 6 mm .238"
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
Type
Terminal blocks for
ground wires UL 94 V0
M 4/6.4A...Ex
Spacing 6 mm .238"
Terminal block for ground wire.
Standard blocks UL 94 V0
Standard 6 mm block
One circuit and three clamps
9.5 mm / .37"
0.5-0.8 Nm / 4.4-7.1 Ib-in
Exe : 420 V
Exi : 190 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0028U
P/N Type
P/N
• th. 2,8
• th. 2,8
th. 2,8
• th. 2,8
• th. 2,8
1SNA 146 259 R1500
1SNA 199 302 R0700
1SNA 199 305 R0200
1SNA 103 126 R1600
1SNA 103 125 R1500
1SNA 116 728 R2500 SCM6
1SNA 118 707 R0300 SCF6
1SNA 114 825 R0500 SCFM6
•
1SNA 113 003 R1000 SCM6
1SNA 118 707 R0300
1SNA 114 825 R0500
•
1SNA 113 003 R1000
1SNA 176 278 R1600
1SNA 176 279 R1700
1SNA 176 280 R0500
1SNA 176 281 R2200
1SNA 176 282 R2300
1SNA 173 627 R2100
1SNA 177 652 R0600
1SNA 168 629 R1600
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
EL6
•
•
•
•
•
•
1SNA 176 663 R0000
1SNA 176 664 R0100
1SNA 176 665 R0200
1SNA 176 666 R0300
1SNA 176 667 R0400
1SNA 173 627 R2100
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
EL6
•
•
•
•
•
•
1SNA 176 663 R0000
1SNA 176 664 R0100
1SNA 176 665 R0200
1SNA 176 666 R0300
1SNA 176 667 R0400
1SNA 173 627 R2100
BJS6 (1)
EV6I
PC6 (3)
EIP
CBM5
CBM8
•
•
•
•
•
•
1SNA 174 784 R2000
1SNA 206 394 R0200
1SNA 113 548 R2600
1SNA 113 550 R2400
1SNA 178 745 R1400
1SNA 178 746 R1500
BJS6 (1)
EV6I
PC6 (3)
EIP
•
•
1SNA 174 784 R2000
1SNA 206 394 R0200
1SNA 113 548 R2600
1SNA 113 550 R2400
EP6
VSP6
•
•
1SNA 163 427 R1700
1SNA 163 433 R1500
1SNA 146 259 R1500
1SNA 199 302 R0700
1SNA 199 305 R0200
1SNA 103 126 R1600
1SNA 103 125 R1500
FEM6 V0
FEM6 V0
FEM6 V0
FEM6
FEM6
th. 3
th. 3
FEM3A V0 (4)
FEM3A (4)
FEM4A V0 (5)
FEM4A (5)
th. 2,8
th. 2,8
th. 2,8
th. 2,8
1SNA 146 261 R0700
1SNA 126 576 R1700
1SNA 146 262 R0000
1SNA 126 629 R2400
4
9
8
10
9
10
11
11
12
12
13
13
14
14
not IP20
see section : accessories
Connector plate
Jumper bar not preassembled 20 poles
Post + screw + washer
Jumper bar not preassembled 20 poles
Post + washer + captive screw IP20
Comb-type jumper bar
10 poles
Isolating cover
Shielding connector
th. 0.5
th. 0.8
Protection label
4 blocks
Screw for protection label
•
•
•
•
•
1SNA 113 544 R1200
1SNA 113 550 R2400
1SNA 178 745 R1400
1SNA 178 746 R1500
• These accessories cannot be
mounted on MA 2,5/5.P.Ex block
R
R See markers section
Other accessories see section accessories
14
PC5 (3)
EIP
CBM5
CBM8
•
•
•
•
•
•
RC 55 - RC510
• These accessories cannot be
mounted on M 4/6.P.Ex block
RC 65 - RC610
RC 65 - RC610
(1) A circuit separator SC is required with the use of these accessories. (2) Use of these accessories requires the cut-out of the block body (precut). (3) For other
configurations of poles, see accessories.(4) For M 4/6.3A...Ex. (5) For M 4/6.4A...Ex.
T07075
M 6/8...Ex
Standard and ground
Terminal blocks
Screw clamp
M 10/10...Ex
Spacing 8 mm .315"
M 16/12...Ex
Spacing 10 mm .394"
Spacing 12 mm .473"
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on
DIN 3 rail. The use of
ground terminal blocks do not
decrease the standard terminal
block's voltage ratings.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
End stop
End stop
Rail
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
PR1.Z2
V0
V0
Standard 8 mm block
Standard 10 mm block
M 6/8.P.Ex
Standard 12 mm block with partition
M 10/10.P.Ex
Spacing 8 mm .315"
A
M 16/12.P.Ex
Spacing 10 mm .394"
Spacing 12mm .473"
1
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
Terminal block for ground wire.
(M 10/10.P.Ex closed terminal block)
Terminal block for ground wire.
Type
P/N Type
Terminal block for ground wire.
(M 16/12.P.Ex closed terminal block)
P/N Type
P/N
Standard blocks UL 94 V0
Grey body
Blue body
M 6/8.Ex
M 6/8.N.Ex
1SNA 146 003 R2100 M 10/10.Ex
1SNA 146 004 R2200 M 10/10.N.Ex
1SNA 146 005 R2300 M 16/12.Ex
1SNA 146 006 R2400 M 16/12.N.Ex
1SNA 146 027 R1000
1SNA 146 028 R2100
Terminal blocks for
ground wires UL 94 V0
Green/yellow body (without rail contact) M 6/8.PI.Ex
Green/yellow body (with rail contact) M 6/8.P.Ex
IEC
1SNA 146 238 R0000 M 10/10.PI.Ex
1SNA 146 022 R1300 M 10/10.P.Ex
1SNA 146 239 R0100 M 16/12.PI.Ex
1SNA 146 021 R1200 M 16/12.P.Ex
1SNA 146 291 R2600
1SNA 146 043 R2000
Characteristics
Wire size
Rigid
Flexible
0.5 - 10
0.5 - 6
mm² / AWG
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 / - II ; EN 50020
Current
ATEX marking
1
2
10 mm2
1200 A/1 s
8 AWG
grey
blue
yellow
orange
green
2 Circuit separator
3 Separator end section (block)
4 Separator end section (rail)
grey
grey
grey
8 Preassembled
jumper bar IP 20 touchproof
2 poles
3 poles
4 poles
5 poles
10 poles
FEM6 V0
FEM6 V0
FEM6 V0
FEM6
FEM6
•
•
•
•
•
SCM6
SCF6
SCFM6
IEC
th. 2,8
th. 2,8
th. 2,8
th. 2,8
th. 2,8
th. 3
th. 3
1SNA 146 259 R1500
1SNA 199 302 R0700
1SNA 199 305 R0200
1SNA 103 126 R1600
1SNA 103 125 R1500
0.5 - 25
0.5 - 16
20-6 AWG
1SNA 113 003 R1000 SCM6
1SNA 118 707 R0300 SCF6
1SNA 114 825 R0500 SCFM6
18-6 AWG
16 mm2
1920 A/1 s
6 AWG
12 mm / .47"
1.2-1.4 Nm / 10.6-12.3 Ib-in
Exe : 420 V
Exi : 190 V
57 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0014U
FEM6 V0
FEM6 V0
FEM6 V0
FEM6
FEM6
UL
NFC DIN
P/N Type
Type
End section
UL
0.5 - 16
0.5 - 10
12 mm / .47"
0.8-1 Nm / 7.1-8.9 Ib-in
Exe : 420 V
Exi : 190 V
41 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0014U
Accessories
1
IEC
NFC DIN
22-8 AWG
6 mm2
720 A/1 s
ATEX certificate
3
UL
NFC DIN
4 AWG
14 mm / .55"
1.2-1.4 Nm / 10.6-12.3 Ib-in
Exe : 550 V
Exi : 375 V
76 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0014U
P/N Type
P/N
• th. 2,8
• th. 2,8
th. 2,8
• th. 2,8
• th. 2,8
1SNA 146 259 R1500
1SNA 199 302 R0700
1SNA 199 305 R0200
1SNA 103 126 R1600
1SNA 103 125 R1500
•
1SNA 113 003 R1000
1SNA 118 707 R0300 SCF 12
1SNA 114 825 R0500 SCFM6
•
1SNA 113 102 R1000
1SNA 114 825 R0500
1SNA 176 675 R0400
1SNA 176 676 R0500
1SNA 176 677 R0600
1SNA 176 678 R1700
1SNA 176 679 R1000
•
•
•
•
•
1SNA 179 626 R0600
1SNA 179 628 R1000
1SNA 179 629 R1100
1SNA 179 630 R1600
1SNA 179 631 R0300
BJS12 (2) •
EV12
•
1SNA 177 653 R0700
1SNA 168 664 R1100
•
•
•
1SNA 163 429 R2100
1SNA 163 430 R2600
1SNA 163 432 R1400
th. 3
th. 3
FEM12 V0
FEM12
FEM12
FEM12 V0
•
•
•
•
th. 2,8
th. 2,8
th. 2,8
th. 2,8
1SNA 146 270 R1400
1SNA 128 618 R0300
1SNA 103 065 R2400
1SNA 198 618 R0200
4
9
8
10
9
10
11
11
12
12
13
13
14
14
not IP20
see section : accessories
Connector plate
Jumper bar not preassembled 20 poles
Post + screw + washer
Jumper bar not preassembled 20 poles
Post + washer + captive screw IP20
Comb-type jumper bar
10 poles
Isolating cover
Shielding connector
th. 0.5
th. 0.8
Protection label
3 blocks
4 blocks
Screw for protection label
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
EL6
•
•
•
•
•
•
1SNA 176 669 R1600
1SNA 176 670 R1300
1SNA 176 671 R0000
1SNA 176 672 R0100
1SNA 176 673 R0200
1SNA 173 627 R2100
Other accessories see section accessories
BJMI12 (2)
BJMI12 (2)
BJMI12 (2)
BJMI12 (2)
BJMI12 (2)
•
•
1SNA 174 789 R0500 BJS10(1)
1SNA 206 394 R0200 EV6I
1SNA 163 313 R2400 PC10
•
•
•
1SNA 177 654 R0000
1SNA 206 394 R0200
1SNA 163 315 R2600
EP6
EP8
VSP6
•
•
•
1SNA 163 427 R1700 EP8
1SNA 163 428 R2000 EP10
1SNA 163 433 R1500 VSP6
•
•
•
1SNA 163 428 R2000 EP10
1SNA 163 429 R2100 EP12
1SNA 163 433 R1500 VSP12
mounted on M 6/8.P.Ex block
R See markers section
•
•
•
•
•
BJS8 (1)
EV6I
PC8 (3)
• These accessories cannot be
R
BJMI10 (1)
BJMI10 (1)
BJMI10 (1)
BJMI10 (1)
BJMI10 (1)
RC 65 - RC610 - RC810
• These accessories cannot be
mounted on M 10/10.P.Ex block
RC 65 - RC610 - RC810
• These accessories cannot be
mounted on M 16/12.P.Ex block
RC 65 - RC610- RC810
(1) Use of these accessories requires the cut-out of the block body (precut).
15
T07076
M 35/16...Ex
Standard and ground
Terminal blocks
Screw clamp
M 95/26...Ex
Spacing 22mm .866"
Spacing 26 mm 1.02"
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on DIN 3
rail. The use of ground terminal
blocks do not decrease the
standard terminal block's voltage
ratings.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
1
End stop
End stop
End stop
Rail
Rail
Rail
Rail
M 70/22...Ex
Spacing 16 mm .630"
th. 12 mm
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADH
BAEH
BAMH V0
PR3.Z2
PR4
PR5
PR1.Z2
V2
V2
V0
1SNA 116 900 R2700
1SNA 116 934 R0400
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
Standard 16 mm block with
partition
Standard 22 mm block with
partition
M 35/16.P.Ex
M 70/22.P.Ex
Spacing 16 mm .630"
M 95/26.P.Ex
Spacing 22 mm .866"
Terminal block for ground wire.
(M 35/16.P.Ex closed terminal block)
Type
Standard 26 mm block with
partition
Spacing 26 mm 1.02"
Terminal block for ground wire.
(M 70/22.P.Ex closed terminal block)
P/N Type
Terminal block for ground wire.
(M 95/26.P.Ex closed terminal block)
P/N Type
P/N
Standard blocks UL 94 V0
Grey body
Blue body
M 35/16.Ex
M 35/16.N.Ex
1SNA 146 029 R2200 M 70/22.Ex
1SNA 146 030 R2700 M 70/22.N.Ex
1SNA 146 025 R1600 M 95/26.Ex
1SNA 146 026 R1700 M 95/26.N.Ex
Terminal blocks for
ground wires UL 94 V0
Green/yellow body (without rail contact)
Green/yellow body (with rail contact) M 35/16.P.Ex
IEC
M 70/22.PI.Ex
1SNA 146 044 R2100 M 70/22.P.Ex
1SNA 146 289 R0400
1SNA 146 073 R2600 M 95/26.P.Ex
Characteristics
UL
IEC
NFC DIN
Wire size
Rigid
Flexible
mm² / AWG
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
Accessories
10-0 AWG
10-1 AWG
16 - 95
16 - 70
35 mm2
4200 A/1s
0 AWG
70 mm2
8400 A/1s
1
2 Separator end section (block)
grey
blue
yellow
FEM16 V0 •
FEM16 V0 •
FEM16
•
th. 3
th. 3
th. 3
grey
35 - 120
35 - 95
00 AWG
25 mm / .98"
6-7 Nm / 53.4-62.3 Ib-in
Exe : 660 V
Exi : 375 V
192 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0027U / 0023U
1SNA 146 271 R0100 FEM22 V0
1SNA 199 304 R0100
1SNA 103 061 R2000
SCF22
1SNA 146 068 R0100
UL
NFC DIN
4-00 AWG
P/N Type
Type
1 End section
IEC
NFC DIN
1 - 50
1 - 35
17 mm / .67"
2.8-3 Nm / 24.9-26.7 Ib-in
Exe : 750 V
Exi : 375 V
125 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0014U
ATEX certificate
UL
1SNA 146 020 R2500
1SNA 146 024 R1500
0000 AWG
95 mm²
0000 AWG
11400 A/1s
26 mm / 1.02"
8.5-9.5 Nm / 74-83 Ib-in
Exe : 750 V
Exi : 375 V
232 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0022U / 0023U
P/N Type
th. 3
1SNA 146 269 R1700
th. 3
1SNA 113 851 R1600
P/N
2
2 poles
3 poles
4 poles
not IP20
5 poles
see section : accessories
10 poles
6 Jumper bar not preassembled 20 poles
Post + screw + washer
BJM16 (1)
BJM16 (1)
BJM16 (1)
BJM16 (1)
BJM16 (1)
BJS16 (1)
EV16
•
•
•
•
•
• 10 poles
•
7 Protection label
EP12
EP16
VSP16
•
•
•
5 Preassembled
jumper bar IP 20 touchproof
5
3 blocks
4 blocks
Screw for protection label
1SNA 179 613 R0100
1SNA 179 614 R0200
1SNA 179 615 R0300
1SNA 179 616 R0400
1SNA 179 617 R0500
1SNA 168 238 R1600 BJS22(1)
1SNA 179 627 R0700 BJS22(1)
BJS22(1)
BJS22(1)
VSJ51
RDJ51
1SNA 163 430 R2600 EP223
1SNA 163 431 R1300 EP224
1SNA 173 147 R2000 VSP22
• 2 poles
• 3 poles
• 5 poles
• 10 poles
•
screw
• washer
•
•
•
1SNA 173 316 R2100
1SNA 173 317 R2200
1SNA 173 318 R0300
1SNA 173 319 R0400
1SNA 173 320 R0100
1SNA 173 331 R2000
1SNA 173 327 R2400
1SNA 173 328 R0500
1SNA 173 323 R2000
BJS261
BJS261
BJS261
BJS261
VSJ51
RDJ51
• 2 poles
• 3 poles
• 5 poles
• 10 poles
•
screw
• washer
1SNA 177 508 R0700
1SNA 177 509 R0000
1SNA 177 510 R2400
1SNA 177 511 R1100
1SNA 173 320 R0100
1SNA 173 331 R2000
6
7
• These accessories cannot be
mounted on M 35/16.P.Ex block
R
R See markers section
RC 65 - RC610 - RC810
• These accessories cannot be
mounted on M 70/22.P.Ex block
RC 65 - RC610 - RC810
• These accessories cannot be
mounted on M 95/26.P.Ex block
RC 65 - RC610- RC810
(1) A circuit separator SC is required with the use of these accessories. (2) Use of these accessories requires the cut-out of the block body (precut).
Other accessories see section accessories
16
T07077
MA 2,5/5.D2... .Ex
Double-deck terminal blocks
Screw clamp
Spacing 5 mm .200"
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on DIN 3
rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
M 4/6.D2.Ex
Spacing 6 mm .238"
Standard 5 mm block
Standard 6 mm block
A
MA 2,5/5.D2.1.Ex
Spacing 5 mm .200"
1
End stop
End stop
End stop
Rail
Rail
Rail
Rail
th. 12 mm
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADH
BAEH
BAMH V0
PR3.Z2
PR4
PR5
PR1.Z2
V2
V2
V0
1SNA 116 900 R2700
1SNA 116 934 R0400
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
M 2,5/5.D2.Ex with partition
Type
Standard blocks UL 94 V0
Grey body
Blue body
1SNA 146 017 R1600 M 4/6.D2.Ex
1SNA 146 018 R2700
MA 2,5/5.D2.1.Ex
1SNA 146 019 R2000
IEC
Characteristics
P/N Type
MA 2,5/5.D2.Ex
MA 2,5/5.D2.N.Ex
UL
IEC
NFC DIN
Wire size
Rigid
Flexible
P/N
1SNA 146 009 R0700
UL
NFC DIN
0.2 - 4
22-12 AWG
0.22 - 2.5
0.2 - 4
0.22 - 4
22-12 AWG
mm² / AWG
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
2.5 mm2
12 AWG
9 mm / .35"
0.4-0.6 Nm / 3.5-5.3 Ib-in
Exe : 380 V
Exi : 90 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0026U
ATEX certificate
Accessories
1
grey
blue
P/N
FEM6D V0
FEM6
th. 1
th. 1
1SNA 146 260 R1200 FEM6D V0
1SNA 128 499 R2500 FEM6D
th. 1
th. 1
1SNA 146 260 R1200
1SNA 128 499 R2500
grey
Beige V0
3 Separator end section (block)
grey
SCMA5D (3)
th. 1
1SNA 116 720 R2100 SCM6D (3)
SCM6D V0 (3)
SCF6D
th. 1
th. 1
th. 1
1SNA 113 482 R0500
1SNA 193 482 R0600
1SNA 118 495 R1700
7 Preassembled
jumper bar not IP 20
9 Connector plate
10 Jumper bar not preassembled
Post + screw + washer
11 Comb-type jumper bar
10 poles
Isolating cover
12 Vertical inerconnection
13 Shielding connector
th. 0.5
BJM5D (1) (2)
BJM5D (1) (2)
BJM5D (1) (2)
BJM5D (1) (2)
BJM5D (1) (2)
BJMI5D (1) (2)
BJMI5D (1) (2)
BJMI5D (1) (2)
BJMI5D (1) (2)
BJMI5D (1) (2)
EL6
BJS5D (1) (2) 20 poles
EV5D
PC5
EIP
ITV5
CBM5D
R See markers section
RC510
2 Circuit separator
2
12 AWG
8.5 mm / .33"
0.5-0.8 Nm / 4.4-7.1 lb.in
Exe : 380 V
Exi : 190 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0019U
P/N Type
Type
1 End section
4 mm²
3
7
8 Preassembled
jumper bar
with IP 20 touchproof
9
8
11
10
12
2 poles
3 poles
4 poles
5 poles
10 poles
2 poles
3 poles
4 poles
5 poles
10 poles
1SNA 176 226 R2200
1SNA 176 227 R2300
1SNA 176 228 R0400
1SNA 176 229 R0500
1SNA 176 230 R0200
1SNA 176 736 R2100
1SNA 176 737 R2200
1SNA 176 738 R0300
1SNA 176 739 R0400
1SNA 176 740 R1100
1SNA 173 627 R2100
1SNA 177 651 R0500
1SNA 176 260 R1000
1SNA 113 544 R1200
1SNA 113 550 R2400
1SNA 176 259 R1300
1SNA 173 530 R2400
BJM6D (1) (2)
BJM6D (1) (2)
BJM6D (1) (2)
BJM6D (1) (2)
BJM6D (1) (2)
BJMI6D (1) (2)
BJMI6D (1) (2)
BJMI6D (1) (2)
BJMI6D (1) (2)
BJMI6D (1) (2)
EL6
BJS61 (1) (2) 10 poles
EV6D
PC61
1SNA 173 515 R1100
1SNA 173 516 R1200
1SNA 173 517 R1300
1SNA 173 519 R2500
1SNA 173 520 R2200
1SNA 179 668 R2000
1SNA 179 669 R2100
1SNA 179 670 R2600
1SNA 179 671 R1300
1SNA 179 672 R1400
1SNA 173 627 R2100
1SNA 168 485 R2700
1SNA 168 400 R1600
1SNA 163 311 R2200
ITV6
CBM5D
1SNA 168 962 R0400
1SNA 173 530 R2400
13
R
Other accessories see section accessories
RC65 - RC610
(1) A circuit separator SC is required with the use of these accessories.
(2) Use of these accessories requires the cut-out of the block body (precut). (3) Except M 2,5/5.D2.1.Ex and M 4/6.D2.1.Ex
17
T07078
D 2,5/6.DA...Ex
Three level sensor terminal blocks
Screw clamp
Spacing 6 mm .238"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on DIN 3
rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
Three level block for power without
ground protection.
1
End stop
End stop
Rail
Rail
Rail
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADH
BAMH V0
PR3.Z2
PR4
PR5
V2
V0
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Type
Standard blocks UL 94 V0
Grey body
Blue body
P/N
D 2,5/6.DA.Ex
D 2,5/6.DA.N.Ex
IEC
Characteristics
1SNA 146 098 R2000
1SNA 146 104 R2300
UL
NFC DIN
Wire size
Rigid
Flexible
0.2 - 2.5
20-12 AWG
0.22 - 2.5
mm² / AWG
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
2.5 mm2
12 AWG
6 mm / .24"
0.4-0.6 Nm / 3.5-5.3 Ib-in
Exe : 60 V
Exi : 30 V
22 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 03 ATEX 0024U
ATEX certificate
Accessories
Type
1 End section
2 Preassembled
jumper bar
without IP 20 touchproof - 22 A
1
3 Connector plate
4 IDC jumper
2
grey
2 poles
3 poles
4 poles
5 poles
10 poles
20 poles
22 A
24 A
FED3E
BJD6
BJD6
BJD6
BJD6
BJD6
BJD6
EL61
AD2,5
P/N
th. 3
1SNA 116 771 R2000
1SNA 178 024 R2500
1SNA 178 025 R2600
1SNA 178 026 R2700
1SNA 178 027 R2000
1SNA 178 032 R2500
1SNA 178 033 R2600
1SNA 177 812 R1700
1SNA 114 205 R2000
3
4
R
R See markers section
Other accessories see section accessories
18
RC65
RC65
red - blank 1SNA 103 776 R0100
blue - blank 1SNA 103 775 R0000
Power supply block for sensors/actuators - Three-wires without Led.
T07080
M 4/6.RS.Ex
Safety connection
terminal blocks
Screw clamp
M 6/8.RS.Ex
Spacing 6 mm .238"
M 10/10.RS.Ex
Spacing 8 mm .315"
Spacing 10 mm .394"
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on DIN 3
rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
center of rail
Compression clamp terminal for bare
wire or equipped with bent lug.
- 1 spring under each wire-clamp
Compression clamp terminal for bare Compression clamp terminal for bare
wire or equipped with bent lug.
wire or equipped with bent lug.
- 1 spring under each wire-clamp
- 1 spring under each wire-clamp
A
1
End stop
End stop
Rail
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
PR1.Z2
V0
V0
Ground wire-clamp holds 2 bent lugs, as above (not supplied)
for connection of wires :
0.28 to 1.5 mm²
1.0 to 2.5 mm²
2.5 to 6.0 mm² (only for M 10/10.RS.Ex)
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
Type
Standard blocks UL 94 V0
Grey body
Characteristics
Wire size
Screw clamp
P/N Type
M 4/6.RS.Ex
Rigid
Flexible
P/N Type
1SNA 146 350 R1400 M 6/8.RS.Ex
P/N
1SNA 146 211 R2500 M 10/10.RS.Ex
1SNA 146 212 R2600
IEC
BS
IEC
BS
IEC
BS
NFC DIN
TS 50-18
NFC DIN
TS 50-18
NFC DIN
TS 50-18
0.2 - 4
0.22 - 4
0.5 - 10
0.5 - 6
0.5 - 1.5
4 mm2
6 mm2
0.5 - 16
0.5 - 10
mm² / AWG
Lugs Flexible
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
0.28 - 1.65
1.65 mm2
13 mm / .51"
0.5-0.8 Nm / 4.4-7.1 Ib-in
Exe : 750 V
Exi : 375 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 05 ATEX 004U
ATEX certificate
Accessories
1
P/N Type
Type
1 End section
grey
0.28 - 2.5
2.5 mm2
13 mm / .51"
0.8-1 Nm / 7.1-8.9 Ib-in
Exe : 550 V
Exi : 375 V
41 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0012U
0.28 - 6
6 mm2
14 mm / .55"
1.2-1.4 Nm / 10.6-12.3 Ib-in
Exe : 550 V
Exi : 375 V
46 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0012U
10 mm2
P/N Type
P/N
FEMR8
th. 2,8
1SNA 146 272 R0200 FEMR8
th. 2,8
1SNA 146 272 R0200 FEMR10
th. 2,8
1SNA 146 273 R0300
BJS6 (1)
BJS6 (1)
BJS6 (1)
BJS6 (1)
BJS6 (1)
2 poles
3 poles
4 poles
5 poles
10 poles
1SNA 164 573 R2200
1SNA 164 574 R2300
1SNA 164 575 R2400
1SNA 164 736 R2500
1SNA 164 576 R2500
2 poles
3 poles
4 poles
5 poles
10 poles
15 poles
20 poles
1SNA 164 581 R1300
1SNA 164 582 R1400
1SNA 164 583 R1500
1SNA 164 737 R2600
1SNA 164 584 R1600
1SNA 174 788 R0400
1SNA 174 789 R0500
1SNA 206 394 R0200
2 poles
3 poles
4 poles
5 poles
10 poles
20 poles
1SNA 164 585 R1700
1SNA 164 586 R1000
1SNA 164 587 R1100
1SNA 168 273 R1100
1SNA 164 588 R2200
1SNA 177 654 R0000
FEMR8
4 Jumper bar not assembled
FEMR10
BJS10 +
PL101 +
VSJ11
Post + washer + captive screw IP20
Central socket for isolated
interconnection
Screw for central socket
5 Assembled jumper bar
not IP 20
4
BJS8 +
EV6I
5
6
6 Assembled jumper bar
with IP 20 touchproof
7
BJS6 (1)
EV6I
BJM6 (1)
BJM6 (1)
BJM6 (1)
BJM6 (1)
BJM6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
BJMI6 (1)
7 Short circuiting plug
R
R See markers section
Other accessories see section accessories
RC610
BJS8 (1)
BJS8 (1)
BJS8 (1)
BJS8 (1)
BJS8 (1)
BJS8 (1)
20 poles 1SNA 174 784 R2000 BJS8 (1)
1SNA 206 394 R0200 EV6I
2 poles
3 poles
4 poles
5 poles
10 poles
2 poles
3 poles
4 poles
5 poles
10 poles
1SNA 168 516 R2500
1SNA 168 517 R2600
1SNA 168 518 R0700
1SNA 168 519 R0000
1SNA 168 973 R0700
1SNA 176 663 R0000
1SNA 176 664 R0100
1SNA 176 665 R0200
1SNA 176 666 R0300
1SNA 176 667 R0400
BJM8 (1)
BJM8 (1)
BJM8 (1)
BJM8 (1)
BJM8 (1)
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
BJMI8 (1)
BP8.A4
2 poles
3 poles
4 poles
5 poles
10 poles
2 poles
3 poles
4 poles
5 poles
10 poles
RC810
BJS10 (1)
BJS10 (1)
BJS10 (1)
BJS10 (1)
BJS10 (1)
BJS10 (1)
PT101
1SNA 163 181 R1100
VSJ11
1SNA 163 394 R2600
1SNA 168 520 R0500
1SNA 168 521 R2200
1SNA 168 522 R2300
1SNA 168 523 R2400
1SNA 168 974 R0000
1SNA 176 669 R1600
1SNA 176 670 R1300
1SNA 176 671 R0000
1SNA 176 672 R0100
1SNA 176 673 R0200
1SNA 173 888 R2000
RC610 - RC810
(1) Use of these accessories requires the cut-out of the block body (precut).
19
T07081
Screw clamp
Thermocouple terminal blocks
MTC 6.Ex
Thermocouple
terminal blocks
Spacing 6 mm .238"
ABB Entrelec's MTC 6.Ex
thermocouple terminal
block provides an interface
for connecting thermocouple wire with virtually no loss
of signal integrity. The
interface design ensures positive wire continuity and
allows selection and
inventory of one terminal
block for all thermocouple
material.
DIN 1-3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory and mounted on DIN 3
rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
6 mm block for thermocouple
conductors.
The thermocouple principle is based on the reaction of
different metals to temperature. When thermocouple wires are
terminated or connected, the "metal balance" must be
maintained. The introduction of a foreign material (such as
copper) results in loss of signal strength and integrity.
1
End stop
End stop
Rail
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
32 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
PR1.Z2
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1SNA 163 050 R0400
When running extended or intermittent lengths of thermocouple
wire, to a measurement instrument, two solutions are
available :
Type
Standard blocks UL 94 V0
Grey body
Figure 1 : MTC 6.Ex with shield
connector
P/N
1SNA 146 227 R2500
MTC 6.Ex
1. When signals are carried over a long distance, a
thermocouple transmitter is required. The thermocouple
signal, in millivolts (mV), is converted to a milliampere
(mA) signal (i.e. 4-20 mA) for ease of transmission.
2. When thermocouple wire is of insufficient length,
termination and interconnection, using terminal blocks,
will extend its length.
Universal terminal block
Characteristics
Wire size
mm² / AWG
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0025U
Accessories
Type
1 End section
2 Shield connector
material being used. This requires inventory of many different
terminal block types.
31 mm max. / 1.22"
0.4-0.6 Nm / 3.5-5.3 lb.in
Exe : 550 V
Exi : 90 V
ATEX certificate
1
Other thermocouple terminal blocks are available with
hardware (screws, clamps and connecting bar) which match
the thermocouple
2 Rigid conductors for
thermocouple
(DIA. 0.9 - 1.5 mm)
grey
FEM6 V0
CBM5
CBM6
P/N
ABB Entrelec's MTC 6.Ex terminal block adapts to all
thermocouple material. This "neutral" method of connection
limits the introduction of foreign materials to an insignificant
level. The thermocouple wire insulation is stripped (31 mm
maximum) and the bare wires are superimposed on one
another. The thermocouple wires are in contact over their
complete 31 mm length and tightened at two points by round
tip screws (see figure 2).
th. 2.8 1SNA 146 259 R1500
th. 0.5 1SNA 178 745 R1400
th. 0.8 1SNA 178 746 R1500
2
The screws, made of plated brass, have only a mechanical
function, that of holding the wires together with a point contact.
Thus, the pressure points are not relevant in the connection
environment. One thermocouple lead connects through one
terminal block.
The MTC 6 requires only 6 mm of space, allowing 50 terminals
per foot of rail.
Thermocouple shield wire connector bar
R
R See markers section
Other accessories see section accessories
20
RC65 - RC610
The MTC 6.Ex can be field of factory equipped with a shield
connector bar (see figure 1). This bar, made of brass, tin coated
mounts in the lower part of the terminal block. It ensures the
continuity of the thermocouple wire shield through the
terminal block or to ground with no additional spacing.
T07082
D 35/27.FF.Ex
Power terminal blocks
D 70/32.FF.Ex
Spacing 27 mm 1.06"
DIN 3 with bistable foot and base mounting
Exe voltage ratings apply to terminal
blocks only without any accessory
and mounted on DIN 3 rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
D 120/42.FF.Ex
Spacing 32 mm 1.26"
Spacing 42 mm 1.65"
2 studs M8
2 studs M6
2 studs M10
A
1
End stop
End stop
Rail
Rail
Rail
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADH
BAMH V0
PR3.Z2
PR4
PR5
V2
V0
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Type
Standard block UL 94 V0
Grey body
D 35/27.FF.Ex
Without cover
Characteristics
Wire size
Lug
P/N Type
P/N Type
P/N
D 35/27.FF.Ex
1SNA 146 307 R0600 D 70/32.FF.Ex
1SNA 146 308 R1700 D 120/42.FF.Ex
1SNA 146 309 R1000
Delivered with 2 covers
Delivered with 2 covers
Delivered with 2 covers
Rigid
Flexible
1SNA 146 302 R0100 D 70/32.FF.Ex
Without cover
1SNA 146 303 R0200 D 120/42.FF.Ex
Without cover
1SNA 146 304 R0300
IEC
IEC
IEC
IEC
IEC
NFC
DIN
NFC
DIN
NFC
IEC
DIN
(C4) 2.5 - 35
(C4) 2.5 - 35
2.5 - 50
2.5 - 35
(C6) 6 - 95
(C6) 6 - 70
6 - 70
6 - 70
(C8) 6 - 150
(C8) 6 - 120
6 - 120
mm² / AWG
Rated wire size
Recommended wrench
Recommended torque
Voltage
Current
ATEX marking
mm² / AWG
Lug / Central bolt
Nm / Ib.in
EN 60079-7
ATEX certificate
Accessories
Type
1 Rotating protective cover IP20
1
35 mm²
35 mm²
H10 mm / 6 mm Allen key
3 Nm / 26.1 Ib-in /
6 Nm / 52 Ib-in
.
750 V
125 A
I M2 - II 2GD
Ex e
LCIE 03 ATEX 0034U
Grey
CPUF35
70 mm²
70 mm²
H13 mm / 6 mm Allen key
6 Nm / 52 Ib-in /
6 Nm / 52 Ib-in
.
750 V
192 A
I M2 - II 2GD
Ex e
LCIE 03 ATEX 0034U
P/N Type
120 mm²
120 mm²
H17 mm / 6 mm Allen key
10 Nm / 87 Ib-in /
6 Nm / 52 Ib-in
.
750 V
269 A
I M2 - II 2GD
Ex e
LCIE 03 ATEX 0034U
P/N Type
P/N
1SNA 190 016 R1600 CPUF70
1SNA 190 017 R1700 CPUF120
1SNA 190 018 R2000
1SNA 205 772 R1300 BJS32
1SNA 205 773 R1400 BJS32
1SNA 205 767 R1600 DRF8
1SNA 205 774 R1500 BJS42
1SNA 205 775 R1600 BJS42
1SNA 205 768 R2700 DRF10
1SNA 205 776 R1700
1SNA 205 777 R1000
1SNA 205 769 R2000
2 Jumper bar with CHc screws
2 poles BJS27
3 poles BJS27
3 TAP for faston 6.35 x 0.8 mm and screw DRF6
2
3
R
R See marking chapter
RC810 (on cover) - RC810, RPC (on the middle)
RC810 (on cover) - RC810, RPC (on the middle)
RC810 (on cover) - RC810, RPC (on the middle)
Other accessories see section accessories
21
T07083
D 185/55.FF.Ex
Power terminal blocks
DIN 3 with bistable foot and base mounting
Exe voltage ratings apply to terminal
blocks only without any accessory
and mounted on DIN 3 rail.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
D 300/55.FF.Ex
Spacing 55 mm 2.16"
Spacing 55 mm 2.16"
2 studs M16
2 studs M12
1
End stop
End stop
Rail
Rail
Rail
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADH
BAMH V0
PR3.Z2
PR4
PR5
V2
V0
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Type
Standard block UL 94 V0
Grey body
D 185/55.FF.Ex
Without cover
Lug
P/N
1SNA 146 305 R0400 D 300/55.FF.Ex
Without cover
1SNA 146 306 R0500
IEC
IEC
IEC
NFC
DIN
NFC
DIN
Rigid
Flexible
(C11) 25 - 240
(C11) 6 - 185
6 - 185
25 - 300
6 - 300
6 - 300
mm² / AWG/MCM
lug / central bolt
Nm / Ib.in
EN 60079-7
185 mm²
185 mm²
H19 mm / 6 mm Allen key
14 Nm / 121 Ib-in /
6 Nm / 52 Ib-in
.
750 V
353 A
I M2 - II 2GD
Ex e
LCIE 03 ATEX 0034U
Characteristics
Wire size
P/N Type
D 185/55.FF.Ex
1SNA 146 310 R0400 D 300/55.FF.Ex
1SNA 146 311 R2100
Delivered with 2 covers
Delivered with 2 covers
IEC
mm² / AWG
Rated wire size
Recommended wrench
Recommended torque
Voltage
Current
ATEX marking
ATEX certificate
Accessories
Type
1 Rotating protective cover IP20
1
Grey
CPUF185
300 mm²
300 mm²
H24 mm / 6 mm Allen key
25 Nm / 217 Ib-in /
6 Nm / 52 Ib-in
.
750 V
520 A
I M2 - II 2GD
Ex e
LCIE 03 ATEX 0034U
P/N Type
P/N
1SNA 190 019 R2100 CPUF185
1SNA 190 019 R2100
1SNA 205 778 R2100 BJS51
1SNA 205 779 R2200 BJS51
1SNA 205 770 R2500 DRF16
1SNA 205 778 R2100
1SNA 205 779 R2200
1SNA 205 771 R1200
2 Jumper bar with CHc screws
2 poles BJS51
3 poles BJS51
3 TAP for faston 6.35 x 0.8 mm and screw DRF12
2
3
R
R See marking chapter
Other accessories see section accessories
22
RC810 (on cover) - RC810, RPC (on the middle)
RC810 (on cover) - RC810, RPC (on the middle)
T07089
Power terminal blocks
Drilling position for base mounting and dimensions with covers
Particular conditions for
mounting
A
1
Type
D 35/27...
D 70/32...
D 120/42...
D 185/55...
D 300/55...
Mounting with
2 Screws
2 Screws
2 Screws
4 Screws
4 Screws
A
100,5
120
120
135
135
B
7,5
7,5
7,5
13,5
13,5
C
6,5
6,5
6,5
6,5
6,5
D
/
/
/
8,5
8,5
F
63,5
72,5
83,5
103,5
105
G1
136,5
165
197
228,5
/
G2
160
190,5
255,5
295
295
H
82,5
105,7
129,7
151,5
/
Dimensions in mm.
Locking foot operating
with screwdriver DIA. 4
Locking
Between blocks with stul
Center opening (to be made after jumper bar has been removed).
As soon as the screwdriver is removed, the locking foot comes
back to closed position
Marking
2 RC 810 or 1 RC 1010
Side opening.
The locking foot remains in
open or closed position.
RPC type setting marker,
or RC 810 marker
2 slots,2 RC810 not
separated or 1 RC 1010
in 1 slot
With M3 screw
Jumper bar
M3 nut on one side
M3 nut + washer on the other side
- move the marker holders up
- cut out the partition
- screw the jumper bar
Mounting of the derivative
system
Unlocking
Locking
23
T07084
DR 4/6... .Ex
Standard and ground
Miniblocks
Screw clamp
Spacing 6 mm .238"
DIN 2
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory.
The use of ground terminal blocks
do not decrease the standard
terminal block's voltage ratings.
DR 4/6.Ex : Standard block 6 mm
DR 4/6.1.Ex : Standard block 6 mm
with partition.
A
DR 4/6.P.Ex
1
End stop
Rail
th. 6.5 mm
15 x 5 x 1
BADRL
PR2
V0
1SNA 199 420 R2100
1SNA 164 600 R1200
Terminal block for ground wire.
Type
Standard blocks UL 94 V0
Terminal blocks for
ground wires UL 94 V0
DR 4/6.Ex
DR 4/6.1.Ex
DR 4/6.N.Ex
DR 4/6.1.N.Ex
Green/yellow body (with rail contact)
DR 4/6.P.Ex
IEC
Characteristics
1SNA 146 199 R2200
1SNA 146 200 R1700
1SNA 146 276 R0600
1SNA 146 277 R0700
1SNA 146 201 R0400
UL
NFC DIN
Wire size
Rigid
Flexible
With isolated ferrule
mm² / AWG
0.2 - 4
0.22 - 4
18-12 AWG
4 mm2
12 AWG
9.5 mm max. / .37"
0.5-0.8 Nm / 4.4-7.1 lb.in
Exe : 275 V
Exi : 90 V
30 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0017U / 0024U
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
ATEX certificate
Accessories
Type
1 End section
1
P/N
Grey body
Grey body
Blue body
Blue body
2 Circuit separator
grey
blue
FEDR61 V0
FEDR61
white
SCDR61
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
BJM62 (1)
10 poles
3 blocks
BJPD6
PC61
EPD61
VSPD61
P/N
th. 1
th. 1
1SNA 146 293 R2000
1SNA 127 600 R0500
th. 0,3
1SNA 173 016 R1000
2
6 Assembled
jumper bar not IP20
6
7
7 Jumper bar not assembled
Post + screw + washer
8 Pivoting jumper bar
9 Comb-type jumper bar
10 Protection label
Screw for protection label
32 A
32 A
32 A
32 A
32 A
32 A
32 A
32 A
32 A
1SNA 173 217 R2600
1SNA 173 218 R0700
1SNA 173 219 R0000
1SNA 173 221 R2200
1SNA 174 112 R1600
1SNA 174 113 R1700
1SNA 174 114 R1000
1SNA 174 115 R1100
1SNA 173 226 R2700
1SNA 173 223 R2400
1SNA 163 311 R2200
1SNA 173 206 R0400
1SNA 173 207 R0500
8
9
10
R
R See markers section
Other accessories see section accessories
24
RC65
(1) Use of these accessories requires the cut-out of the block body (precut).
T07085
D 2,5/5... .2L.Ex
Standard and ground
Terminal blocks
D 2,5/5... .4L.Ex
Spacing 5 mm .200"
Spacing 5 mm .200"
DIN 2
80
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
center of rail
Terminal blocks for
ground wires UL 94 V0
Terminal block with 2 springs
45,5
D 2,5/5.P.2L.Ex
Terminal block with 4 spring
D 2,5/5.P.3L.Ex
Spacing 5 mm .200"
A
D 2,5/5.P.4L.Ex
Spacing 5 mm .200"
Spacing 5 mm .200"
1
Terminal block with 2 springs for
ground wire.
Terminal block with 3 springs for
ground wire
P/N Type
Terminal block with 4 springs for
ground wire
P/N Type
P/N
D 2,5/5.2L.Ex
D 2,5/5.N.2L.Ex
1SNA 146 053 R2200 D 2,5/5.3L.Ex
1SNA 146 052 R2100 D 2,5/5.N.3L.Ex
1SNA 146 055 R2400 D 2,5/5.4L.Ex
1SNA 146 056 R2500 D 2,5/5.N.4L.Ex
1SNA 146 049 R0600
1SNA 146 050 R0300
Green/yellow body (with rail contact)
D 2,5/5.P.2L.Ex
1SNA 146 054 R2300 D 2,5/5.P.3L.Ex
1SNA 146 057 R2600 D 2,5/5.P.4L.Ex
1SNA 146 051 R2000
Wire size
Rigid
Flexible
mm² / AWG
With isolated ferrule
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended screwdriver
mm / inches
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
ATEX certificate
Accessories
IEC
IEC
IEC
NFC DIN
NFC DIN
NFC DIN
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
300 A / 1 s
9.5 mm / .37"
3.5 mm / .14"
Exe : 550 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0031U
2 Circuit separator
4 Jumper bar
IP 20 - 24 A
grey
orange
orange
FED5.2L
FED5.2L
SCD5.2L
th. 2,5
th. 2,5
th. 2,5
orange
BJDL5.2
BJDL5.3
BJDL5.4
BJDL5.5
BJDL5.6
BJDL5.7
BJDL5.8
BJDL5.9
BJDL5.10
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
2
5 Jumper bar
orange
between 2 blocks, different spacing
- spacing 5 and 6 mm
IP 20 - 24 A
- spacing 5 and 8 mm
IP 20 - 24 A
6 Shielding connector
BJDPL5.6 (1)
BJDPL5.8 (1)
CBD5.2L •
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
300 A / 1 s
9.5 mm / .37"
3.5 mm / .14"
Exe : 550 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0010U
P/N Type
Type
1 End section
4
Terminal block with 3 spring
40
Grey body
Blue body
Characteristics
1
center of rail
29
Type
Standard blocks UL 94 V0
38
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
1 wire per spring.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
45,5
58
38
Spring clamp
D 2,5/5... .3L.Ex
Spacing 5 mm .200"
1SNA 291 061 R2400 FED5.3L
1SNA 291 062 R2500 FED5.3L
1SNA 291 352 R0400 SCD5.3L
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
BJDL5.2
BJDL5.3
BJDL5.4
BJDL5.5
BJDL5.6
BJDL5.7
BJDL5.8
BJDL5.9
BJDL5.10
1SNA 291 150 R0600 BJDPL5.6 (1)
1SNA 291 160 R0000 BJDPL5.8 (1)
th. 0,5 1SNA 291 077 R2400
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
300 A / 1 s
9.5 mm / .37"
3.5 mm / .14"
Exe : 550 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0010U
P/N Type
th. 2,5
th. 2,5
th. 2,5
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
1SNA 291 051 R2200 FED5.4L
1SNA 291 052 R2300 FED5.4L
1SNA 291 362 R0600 SCD5.4L
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
BJDL5.2
BJDL5.3
BJDL5.4
BJDL5.5
BJDL5.6
BJDL5.7
BJDL5.8
BJDL5.9
BJDL5.10
1SNA 291 150 R0600 BJDPL5.6 (1)
1SNA 291 160 R0000 BJDPL5.8 (1)
P/N
th. 2,5
th. 2,5
th. 2,5
1SNA 291 041 R2000
1SNA 291 042 R2100
1SNA 291 372 R0000
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
1SNA 291 150 R0600
1SNA 291 160 R0000
5
6
R
R See markers section
Other accessories see section accessories
• This accessory cannot be
mounted on M 2.5/5.P.L2.Ex block
RC510, RPC (on top) - RC55 (on side)
RC510, RPC (on top) - RC55 (on side)
RC510, RPC (on top) - RC55 (on side)
(1) Insert an end section between the 2 connected blocks
25
T07103
D 2,5/5.I.3L.Ex
Standard and ground
Terminal blocks
Spring clamp
A
1
Spacing 5 mm .200"
DIN 2
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
1 wire per spring.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
Terminal block with 2 springs
* Can accept 4 mm² rigid wire.
End stop
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM
BAM V0
PR3.Z2
PR4
PR5
V0
V2
V0
1SNA 399 903 R0200
1SNA 103 002 R2600
1SNA 199 306 R0300
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
P/N Type
Type
Standard blocks UL 94 V0
Grey body
Terminal blocks for
ground wires UL 94 V0
Green/yellow body (with rail contact)
D 2,5/5.I.3L.Ex
Characteristics
Wire size
Rigid
Flexible
mm² / AWG
With isolated ferrule
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended screwdriver
mm / inches
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
IEC
IEC
IEC
NFC DIN
NFC DIN
0.12 - 4*
0.12 - 2.5
0.5 - 2.5
2.5 mm2
300 A / 1 s
9,5 mm / .37"
3.5 mm / .14"
Exe : 630 V
Exi : 375 V
24 A
I M2 / M1
II 2GD / 1GD
LCIE 05 ATEX 0015U
Accessories
P/N Type
Type
1 End section
2 Circuit separator
4 Jumper bar
IP 20 - 24 A
grey
orange
orange
FED5.2L
FED5.2L
SCD5.2L
th. 2,5
th. 2,5
th. 2,5
1SNA 291 061 R2400
1SNA 291 062 R2500
1SNA 291 352 R0400
orange
BJDL5.2
BJDL5.3
BJDL5.4
BJDL5.5
BJDL5.6
BJDL5.7
BJDL5.8
BJDL5.9
BJDL5.10
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
2
5 Jumper bar
orange
between 2 blocks, different spacing
- spacing 5 and 6 mm
IP 20 - 24 A
- spacing 5 and 8 mm
IP 20 - 24 A
6 Shielding connector
4
BJDPL5.6 (1)
BJDPL5.8 (1)
CBD5.2L •
1SNA 291 150 R0600
1SNA 291 160 R0000
th. 0,5 1SNA 291 077 R2400
5
6
R
R See markers section
Other accessories see section accessories
• This accessory cannot be
mounted on M 2.5/5.P.L2.Ex block
RC510, RPC (on top) - RC55 (on side)
(1) Insert an end section between the 2 connected blocks
26
P/N
NFC DIN
ATEX certificate
1
P/N Type
1SNA 146 352 R0200
P/N Type
P/N
T07086
D 2,5/5... ..2L.2L.Ex
Standard and ground
Terminal blocks
Spring clamp
Spacing 5 mm .200"
D 6/8... .2L.Ex
Spacing 8 mm .315"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
1 wire per spring.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
Double circuit
Terminal block with 4 springs with 2
electrically separated circuits. Each
circuit has its own test socket and
can be jumpered independently.
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Terminal blocks for
ground wires UL 94 V0
Grey body
Blue body
Rigid
Flexible
mm² / AWG
With isolated ferrule
Rated wire size
mm² / AWG
Short circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended screwdriver
mm / inches
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
ATEX certificate
Accessories
1
2 Circuit separator
4 Jumper bar
IP 20 - 24 A
5 Jumper bar
between 2 blocks, different
- spacing 5 and 6 mm
- spacing 5 and 8 mm
- spacing 6 and 8 mm
1
Terminal block with 2 springs for
ground wire.
P/N Type
P/N
1SNA 146 251 R0500 D 6/8.2L.Ex
1SNA 146 058 R0700 D 6/8.N.2L.Ex
1SNA 146 059 R0000
1SNA 146 060 R0500
D 4/6.P.2L.Ex
1SNA 146 253 R0700 D 6/8.P.2L.Ex
1SNA 146 061 R2200
IEC
IEC
NFC DIN
NFC DIN
NFC DIN
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
0.2 - 6
0.2 - 4
0.5 - 4
4 mm2
480 A / 1 s
11 mm / .43"
4 mm / .16"
Exe : 660 V
Exi : 90 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0015U
9.5 mm / .37"
3.5 mm / .14"
Exe : 110 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0010U
P/N Type
FED5.4L
FED5.4L
SCD5.4L
th. 2,5
th. 2,5
th. 2,5
orange
BJDL5.2
BJDL5.3
BJDL5.4
BJDL5.5
BJDL5.6
BJDL5.7
BJDL5.8
BJDL5.9
BJDL5.10
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
orange
spacing
IP 20 - 24 A
IP 20 - 24 A
IP 20 - 32 A
Spacing 8 mm .315"
IEC
grey
orange
orange
2
Spacing 6 mm .236"
P/N Type
Type
1 End section
A
D 6/8.P.2L.Ex
D 4/6.P.2L.Ex
1SNA 146 047 R2400 D 4/6.2L.Ex
1SNA 146 048 R0500 D 4/6.N.2L.Ex
Green/yellow body (with rail contact)
Wire size
Terminal block with 2 springs
Terminal block with 2 springs for
ground wire.
D 2,5/5.2L.2L.Ex
D 2,5/5.N.2L.2L.Ex
Characteristics
Terminal block with 2 springs
* Marking to make a difference
between the D 2,5/5... .4L.Ex and the
D 2,5/5.2L.2L.Ex terminal blocks.
Same dimensions as D 2,5/5...4L.Ex
Type
Standard blocks UL 94 V0
4
D 4/6... .2L.Ex
Spacing 6 mm .236"
BJDPL5.6 (1)
BJDPL5.8 (1)
P/N Type
1SNA 291 041 R2000 FED5.2L
1SNA 291 042 R2100 FED5.2L
1SNA 291 372 R0000 SCD5.2L
th. 2,5
th. 2,5
th. 2,5
BJDL6.2
BJDL6.3
BJDL6.4
BJDL6.5
2 poles
3 poles
4 poles
5 poles
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
1SNA 291 150 R0600 BJDPL5.6 (1)
1SNA 291 160 R0000
BJDPL6.8 (1)
0.5 - 10
0.5 - 6
0.5 - 6
6 mm2
720 A / 1 s
12.5 mm / .49"
5.5 mm / .22"
Exe : 550 V
Exi : 90 V
41 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0015U
1SNA 291 061 R2400 FED8.2L
1SNA 291 062 R2500 FED8.2L
1SNA 291 352 R0400
1SNA 291 128 R2400
1SNA 291 129 R2500
1SNA 291 194 R1700
1SNA 291 195 R1000
BJDL8.2
BJDL8.3
BJDL8.4
BJDL8.5
P/N
th. 2,5
th. 2,5
1SNA 291 161 R2500
1SNA 291 162 R2600
2 poles
3 poles
4 poles
5 poles
1SNA 291 122 R1600
1SNA 291 123 R1700
1SNA 291 144 R2400
1SNA 291 145 R2500
1SNA 291 150 R0600
BJDPL5.8 (1)
1SNA 291 170 R0200 BJDPL6.8 (1)
1SNA 291 160 R0000
1SNA 291 170 R0200
5
R
R See markers section
Other accessories see section accessories
RC510, RPC (on top) - RC55 (on side)
RC610, RPC (on top) - RC65 (on side)
RC610, RC810, RPC (on top) - RC65, RCAL (on side)
(1) Insert an end section between the 2 connected blocks
27
T07087
D 10/10.2L.Ex
Standard and ground
Terminal blocks
Spring clamp
D 35/16.2L.Ex
Spacing 12 mm .473"
Spacing 16 mm .630"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
1 wire per spring.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
A
1
End stop
End stop
End stop
Rail
Rail
Rail
D 16/12.2L.Ex
Spacing 10 mm .394"
th. 9 mm
th. 9,1 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM
BAM V0
PR3.Z2
PR4
PR5
V0
V2
V0
1SNA 399 903 R0200
1SNA 103 002 R2600
1SNA 199 306 R0300
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Terminal block with 2 springs with 1 test + Terminal block with 2 springs with 1 test
1 interconnection on one side
+ 1 interconnection on both sides
D 10/10.P.2L.Ex
Spacing 10 mm .394"
Terminal blocks for
ground wires UL 94 V0
D 35/16.P.2L.Ex
D 16/12.P.2L.Ex
Spacing 12 mm .473"
Terminal block with 2 springs for ground
wire.
Type
Standard blocks UL 94 V0
Terminal block with 2 springs with 1 test +
1 interconnection on both sides
Spacing 16 mm .630"
Terminal block with 2 springs for ground
wire.
P/N Type
Terminal block with 2 springs for ground
wire.
P/N Type
P/N
Grey body
Blue body
D 10/10.2L.Ex
D 10/10.N.2L.Ex
1SNA 146 118 R2000 D 16/12.2L.Ex
1SNA 146 120 R2600 D 16/12.N.2L.Ex
1SNA 146 130 R2000 D 36/16.2L.Ex
1SNA 146 132 R1600 D 35/16.N.2L.Ex
1SNA 146 136R1200
1SNA 146 138 R2400
Green/yellow body (with rail contact)
D 10/10.P.2L.Ex
1SNA 146 122 R1400 D 16/12.P.2L.Ex
1SNA 146 134 R1000 D 35/16.P.2L.Ex
1SNA 146 140 R0200
Characteristics
Wire size
Rigid
Flexible
mm² / AWG
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended screwdriver
mm / inches
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
IEC
IEC
IEC
NFC DIN
NFC DIN
NFC DIN
0.5 - 16
0.5 - 10
0.5 - 25
0.5 - 16
2.5 - 50
2.5 - 35
10 mm2
1200 A / 1 s
12 mm / .47"
5,5 mm / .22"
Exe : 550 V
Exi : 375 V
57 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 05 ATEX 0016U
ATEX certificate
Accessories
P/N Type
Type
1 End section
grey
1
3 Jumper bar
57 A - D 10/10.2L.Ex
76 A - D 16/12.2L.Ex
115 A - D 35/16.2L.Ex
4 Jumper bar
between 2 blocks, different
- spacing 5 and 6 mm
- spacing 6 and 10 mm
- spacing 8 and 10 mm
orange
orange
spacing
IP 20 - 24 A
IP 20 - 32 A
IP 20 - 41 A
FED10.2L
FED10.2L
16 mm2
1920 A / 1 s
19 mm / .79"
6,5 mm / .26"
Exe : 550 V
Exi : 375 V
76 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 05 ATEX 0016U
th. 2,5
th. 2,5
1SNA 291 461 R2200 FED12.2L
1SNA 291 462 R2300 FED12.2L
FED12.2L
35 mm2
4200 A / 1 s
26 mm / 1.02"
6,5 mm / .26"
Exe : 750 V
Exi : 375 V
125 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 05 ATEX 0016U
P/N Type
th. 2,5
th. 2,5
th. 2,5
BJDL1.10.2 (1) 2 poles
BJDL1.10.3 (1) 3 poles
BJDL1.10.4 (1) 4 poles
BJDL1.10.5 (1) 5 poles
1SNA 291 472 R2500 BJDL12.2 (1) 2 poles
1SNA 291 474 R2700
1SNA 291 476 R2100
1SNA 291 478 R0300
BJDPL5.10 (2)
BJDPL6.10 (2)
BJDPL8.10 (2)
1SNA 291 480 R2200
1SNA 291 482 R1000
1SNA 291 484 R1200
P/N
1SNA 399 571 R0400
1SNA 399 572 R0500
1SNA 399 574 R0700
1SNA 399 563 R0400 BJDL16.2 (1) 2 poles
1SNA 399 621 R0600
3
4
R
R See markers section
Other accessories see section accessories
RC1010, RC810, RCC610 (on top)
RCAL85, RC65 (on side)
RC1010, RC810, RCC610 (on top)
RCAL85, RC65 (on side)
(1) No voltage decrease EExe and EExi with BJDL - (2) Insert an end section between the 2 connected blocks
28
RC1010, RC810, RCC610 (on top)
RCAL85, RC65 (on side)
T07090
DR 2,5/5.2L.Ex
Standard and ground miniblocks
- Spring clamp
DB 2,5/5.2L.Ex
Spacing 5 mm .200"
DIN 2
- Base mount with flanges
Miniblock with 2 springs
Miniblock with 2 springs
DR 2,5/10.P.4L.Ex
A
Spacing 10 mm .396"
1
33,5
30
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
1 wire per spring.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
center of rail
16,5
Ground miniblock with 4 springs
End stop
Rail
th. 6.5 mm
15 x 5 x 1
BADRL
PR2
V0
1SNA 199 420 R2100
1SNA 164 600 R1200
Type
Standard blocks UL 94 V0
Terminal blocks for
ground wires UL 94 V0
P/N
DR 2,5/5.2L.Ex
DR 2,5/5.N.2L.Ex
1SNA 146 207 R0200 DB 2,5/5.2L.Ex
1SNA 146 279 R1100 DB 2,5/5.N.2L.Ex
Green/yellow body (with rail contact)
DR 2,5/10.P.4L.Ex
1SNA 146 263 R0100
Characteristics
Wire size
Rigid
Flexible
mm² / AWG
With isolated ferrule
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended screwdriver
mm / inches
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
ATEX certificate
Accessories
IEC
IEC
NFC DIN
NFC DIN
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
300 A / 1 s
9.5 mm / .37"
3.5 mm / .14"
Exe : 275 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0031U
Type
1 End section
1
P/N Type
Grey body
Blue body
2 Kit end section
(right + left)
3 Separator section
4 Jumper bar
IP 20 - 24 A
grey
orange
grey
orange
grey
orange
orange
2
5 Jumper bar
IP 20 - 24 A
orange
3
FED1.L
FED1.L
FED2.L
FED2.L
BJDL5.2 (1)
BJDL5.3 (1)
BJDL5.4 (1)
BJDL5.5 (1)
BJDL5.6 (1)
BJDL5.7 (1)
BJDL5.8 (1)
BJDL5.9 (1)
BJDL5.10 (1)
BJDL10.2 (2)
BJDL10.3 (2)
BJDL10.4 (2)
BJDL10.5 (2)
0.12 - 4
0.12 - 2.5
0.5 - 2.5
2.5 mm2
9.5 mm / .37"
3.5 mm / .14"
Exe : 275 V
Exi : 60 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0031U
P/N Type
th. 1.5
th. 1.5
th. 4
th. 4
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
2 poles
3 poles
4 poles
5 poles
1SNA 146 246 R0000
1SNA 146 247 R0100
P/N
1SNA 291 301 R0200
1SNA 291 302 R0300
1SNA 291 311 R2300
1SNA 291 312 R2400
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
1SNA 291 322 R2600
1SNA 291 323 R2700
1SNA 291 324 R2000
1SNA 291 325 R2100
FEDB.L
FEDB.L
FED2.L
FED2.L
BJDL5.2 (1)
BJDL5.3 (1)
BJDL5.4 (1)
BJDL5.5 (1)
BJDL5.6 (1)
BJDL5.7 (1)
BJDL5.8 (1)
BJDL5.9 (1)
BJDL5.10 (1)
th. 4
th. 4
2 poles
3 poles
4 poles
5 poles
6 poles
7 poles
8 poles
9 poles
10 poles
1SNA 290 281 R0100
1SNA 290 282 R0200
1SNA 291 311 R2300
1SNA 291 312 R2400
1SNA 291 102 R2300
1SNA 291 103 R2400
1SNA 291 104 R2500
1SNA 291 105 R2600
1SNA 291 106 R2700
1SNA 291 107 R2000
1SNA 291 108 R0100
1SNA 291 109 R0200
1SNA 291 110 R2600
4
5
R
R See markers section
Other accessories see section accessories
RC55
(1) For D.....2,5/5.2L.Ex only.
(2) For DR 2,5/10.P.4L.Ex only.
RC55
29
T07092
D 2,5/5.ADO.Ex
Terminal blocks
Insulation displacement
Screw clamp - ADO
1
D 6/8.ADO.Ex
Spacing 6 mm .238"
Spacing 8 mm .315"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
Standard 5 mm block
Standard 6 mm block
D 2,5/5.P.ADO.Ex
Spacing 5 mm .200"
Standard 8 mm block - * Black
marking
D 4/6.P.ADO.Ex
D 6/8.P.ADO.Ex
Spacing 6 mm .238"
Spacing 8 mm .315"
50
*
56
48,5
A
D 4/6.ADO.Ex
Spacing 5 mm .200"
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
center of rail
Terminal block for ground wire with
rail contact
Type
Standard blocks UL 94 V0
Terminal blocks for
ground wires UL 94 V0
P/N Type
Terminal block for ground wire with
rail contact - * Black marking
P/N Type
P/N
Grey body
Blue body
D 2,5/5.ADO.Ex
D 2,5/5.N.ADO.Ex
1SNA 146 071 R2400 D 4/6.ADO.Ex
1SNA 146 072 R2500 D 4/6.N.ADO.Ex
1SNA 146 032 R1500 D 6/8.ADO.Ex
1SNA 146 033 R1600 D 6/8.N.ADO.Ex
1SNA 146 034 R1700
1SNA 146 035 R1000
Green/yellow body (with rail contact)
D 2,5/5.P.ADO.Ex
1SNA 146 074 R2700 D 4/6.P.ADO.Ex
1SNA 146 031 R1400 D 6/8.P.ADO.Ex
1SNA 146 042 R2700
Characteristics
Wire size
Terminal block for ground wire with
rail contact
25
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
Screw
IEC
IEC
IEC
NFC DIN
NFC DIN
NFC DIN
0.2 - 4
0.22 - 2.5
0.2 - 1
0.22 - 1
1 mm2
120 A / 1 s
9.5 mm / .37"
0.4-0.6 Nm / 3.5-5.3 lb.in
0.2 - 4
0.22 - 4
0.28 - 1.5
0.34 - 1.5
1.5 mm2
180 A / 1 s
9.5 mm / .37"
0.5-0.8 Nm / 4.4-7.1 lb.in
0.2 - 10
0.22 - 6
1 - 2.5
1 - 2.5
2.5 mm2
300 A / 1 s
12 mm / .47"
0.8-1 Nm / 7.1-8.9 lb.in
Exe : 750 V
Exe : 550 V
Exe : 550 V
Exi : 60 V
13,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0029U
ATEX certificate
Accessories
P/N Type
Type
1 End section
1
2 Circuit separator
grey
yellow
grey
Exi : 90 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0020U / 0021U
1SNA 199 336 R2000 FEDAD1
1SNA 199 339 R0300 FEDAD1
1SNA 199 551 R2000 SCAD
FEDAD1
FEDAD1
SCAD5
•
BJM (1)
•
see accessories BJM (1)
BJMI (1)
•
see accessories BJMI (1)
BJS (1)
•
see accessories BJS (1)
BJB
BJADO
•
see accessories BJB
see accessories BJADO
th. 3
th. 3
Exi : 90 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0020U / 0021U
P/N Type
th. 3
th. 3
•
1SNA 199 336 R2000 FEDAD1
1SNA 199 339 R0300 FEDAD1
1SNA 196 896 R0000 SCAD
P/N
•
1SNA 199 336 R2000
1SNA 199 339 R0300
1SNA 196 896 R0000
see accessories BJM (1)
•
see accessories
see accessories BJMI (1)
•
see accessories
see accessories BJS (1)
•
see accessories
see accessories BJB
see accessories BJADO
•
see accessories
see accessories
BJP8
EL6
PC8
•
•
1SNA 174 448 R0700
1SNA 173 627 R2100
10 pôles 1SNA 163 313 R2400
EP6
EP8
VSP6
AD2,5
OUMAD
OUPAD
OUTA
• 3 blocks 1SNA 163 427 R1700
• 4 blocks 1SNA 163 428 R2000
1SNA 163 433 R1500
•
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
th. 3
th. 3
2
6 Assembled jumper bar
(without IP20 protection)
7 Assembled jumper bar
(with IP20 protection)
8 Jumper bar not assembled
6
7
8
10
11
12
14
13
15
16
17
20
10 Jumper bar
11 Screwless jumper bar to be
inserted into ADO jaw
orange IP20
12 Pivoting jumper bar
13 Connector plate
14 Comb-type jumper bar
Isolating cover
15 Shielding connector
th. 0,5
th. 0,8
16 Protection label
18
17
18
19
20
Screw for protection label
IDC jumper
Manual tool
Semi-automatic tool
Interchangeable head kit
• 10 poles 1SNA 113 544 R1200
1SNA 113 550 R2400
1SNA 178 745 R1400
•
1SNA 178 746 R1500
•
PC5
EIP
CBM5
CBM8
OUMAD
OUPAD
OUTA
R See markers section
1SNA 174 413 R1400
•
1SNA 173 627 R2100
•
• 10 poles 1SNA 113 548 R2600
1SNA 113 550 R2400
1SNA 178 745 R1400
•
1SNA 178 746 R1500
•
• 4 blocks 1SNA 163 427 R1700
BJP6
EL6
PC6
EIP
CBM5
CBM8
EP6
VSP6
AD2,5
1SNA 179 466 R0600 OUMAD
1SNA 178 944 R0400 OUPAD
1SNA 205 284 R0300 OUTA
• These accessories cannot be
19
mounted on D 2,5/5.P.ADO.Ex
block
RC55 - RC510 - RTM 7
•
•
• These accessories cannot be
mounted on D 4/6.P.ADO.Ex
block
RC65 - RC610 - RTM7
(1) A circuit separator SC.... is required with these accessories.
30
1SNA 163 433 R1500
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
• These accessories cannot be
mounted on D 6/8.P.ADO.Ex
block
RCAL85 - RC810 - RTM7
T07093
D 6/8.ADO3.Ex
Terminal blocks
Insulation displacement
Screw clamp - ADO
Spacing 8 mm .315"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
Only 1 wire per ADO connection.
For the terminal block voltage rating
with its accessories, consult our
"ATEX technical instructions sheet
for safe mounting".
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Standard 8 mm block - * White
marking
Spacing 8 mm .315"
1
Terminal block for ground wire with
rail contact - * White marking
Type
Standard blocks UL 94 V0
Terminal blocks for
ground wires UL 94 V0
D 6/8.ADO3.Ex
D 6/8.N.ADO3.Ex
1SNA 146 078 R0300
1SNA 146 079 R0400
Green/yellow body (with rail contact)
D 6/8.P.ADO3.Ex
1SNA 146 081 R1700
IEC
NFC DIN
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
0.2 - 10
0.22 - 6
4
4
4 mm2
480 A / 1 s
12 mm / .47"
0.8-1 Nm / 7.1-8.9 lb.in
Exe : 750 V
Exi : 375 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0029U
Screw
ATEX certificate
Accessories
2 Circuit separator
2
6
8
7
grey
yellow
grey
6 Assembled jumper bar
(without IP20 protection)
7 Assembled jumper bar
(with IP20 protection)
8 Jumper bar not assembled
10 Jumper bar
11 Screwless jumper bar to be
inserted into ADO jaw
orange IP20
12 Pivoting jumper bar
13 Connector plate
14 Comb-type jumper bar
15 Protection label
10
11
12
Type
1 End section
1
14
13
15
16
17
P/N
Grey body
Blue body
Characteristics
Wire size
16
17
18
19
A
D 6/8.P.ADO3.Ex
Screw for protection label
IDC jumper
Manual tool
Semi-automatic tool
Interchangeable head kit
18
P/N
FEDAD1
FEDAD1
SCAD
•
1SNA 199 336 R2000
1SNA 199 339 R0300
1SNA 196 896 R0000
BJM8 (1)
•
see accessories
BJMI8 (1)
•
see accessories
BJS (1)
•
see accessories
BJB
BJADO
•
see accessories
see accessories
BJP8
EL6
PC8
EP6
EP8
VSP6
AD2,5
OUMAD
OUPAD
OUTA
•
•
th. 3
th. 3
1SNA 174 448 R0700
1SNA 173 627 R2100
10 poles 1SNA 163 313 R2400
• 3 blocks 1SNA 163 427 R1700
• 4 blocks 1SNA 163 428 R2000
1SNA 163 433 R1500
•
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
• These accessories cannot be
19
R See markers section
mounted on D 6/8.P.ADO3.Ex
block
RCAL85 - RC810 - RTM7
(1) A circuit separator SC.... is required with these accessories.
31
T07094
D 4/6.D2.ADO.Ex
Double deck terminal blocks
Insulation displacement
Screw clamp - ADO
A
1
Spacing 6 mm .238"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
Rail
Rail
Rail
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADH
BAMH V0
PR3.Z2
PR4
PR5
V2
V0
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Terminal block 6 mm, double deck
opened.
Type
Standard blocks UL 94 V0
Grey body
Blue body
NFC DIN
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
Screw
ATEX certificate
Accessories
3
2
7
8
10
11
12
13
15
14
16
17
grey
grey
DIA. 2 mm
DIA. 3 mm
6 Assembled jumper bar without IP20 protection
7 Assembled jumper bar with IP20 protection
8 Jumper bar not assembled
Post + washer + captive screw IP20
6
18
19
0.2 - 4
0.22 - 4
0.28 - 1.5
0.34 - 1.5
1.5 mm2
9.5 mm / .37"
0.5-0.8 Nm / 4.4-7.1 lb.in
Exe : 550 V
Exi : 375 V
17.5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0021U
Type
1 End section
2 Circuit separator
3 Test socket
1
1SNA 146 045 R2200
1SNA 146 046 R2300
IEC
Characteristics
Wire size
P/N
D 4/6.D2.ADO.Ex
D 4/6.D2.N.ADO.Ex
FED2AD1
SCAD
AL2 (1)
AL3 (1)
BJM6...
BJMI6...
BJS6
EV6I
P/N
th. 5
1SNA 199 417 R1200
1SNA 196 896 R0000
DIA 2 1SNA 163 043 R2100
DIA 3 1SNA 163 261 R0000
see accessories
see accessories
20 poles 1SNA 174 784 R2000
1SNA 206 394 R0200
10 Connector plate
11 Screwless jumper bar to be inserted
into ADO jaw
orange IP20
12 Pivoting jumper bar
13 Jumper bar for alternated jumping
14 Connector plate
15 Comb-type jumper bar
Isolating cover
16 Vertical jumper bar
17 Shielding connector
18 Protection label
Screw for protection label
19 IDC jumper
20 Manual tool
21 Semi-automatic tool
22 Interchangeable head kit
BJB
BJADO6...
R See markers section
RC65 - RC610 - RTM7
BJP6 (1)
BJA6 (1)
EL6
PC6
EIP
ITVE
CBD2S
EP6
VSP6
AD2,5
OUMAD
OUPAD
OUTA
1SNA 199 466 R2300
see accessories
1SNA 174 413 R1400
10 poles 1SNA 116 541 R1200
1SNA 173 627 R2100
10 poles 1SNA 113 548 R2600
1SNA 113 550 R2400
1SNA 179 694 R0300
1SNA 178 408 R1400
4 blocks 1SNA 163 427 R1700
1SNA 163 433 R1500
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
20
21
22
R
(1) A circuit separator SC.... is required with these accessories.
32
T07095
D 1/5.ADO.Ex
Terminal blocks
Insulation displacement
ADO - ADO
Spacing 6 mm .238"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Standard 5 mm block
Terminal blocks for
ground wires UL 94 V0
Spacing 5 mm .200"
Spacing 6 mm .238"
1
Terminal block for ground wire with
rail contact
Terminal block for ground wire with
rail contact
P/N Type
P/N
D 1/5.ADO.Ex
D 1/5.N.ADO.Ex
1SNA 146 069 R0200 D 1,5/6.ADO.Ex
1SNA 146 070 R0700 D 1,5/6.N.ADO.Ex
1SNA 146 036 R1100
1SNA 146 037 R1200
Green/yellow body (with rail contact)
D 1/5.P.ADO.Ex
1SNA 146 075 R2000 D 1,5/6.P.ADO.Ex
1SNA 146 040 R0100
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
A
D 1,5/6.P.ADO.Ex
Grey body
Blue body
Characteristics
Wire size
Standard 6 mm block
D 1/5.P.ADO.Ex
Type
Standard blocks UL 94 V0
IEC
IEC
NFC DIN
NFC DIN
Screw
0.2 - 1
0.22 - 1
1 mm2
120 A / 1 s
0.34 - 1.5
0.34 - 1.5
1.5 mm2
180 A / 1 s
Exe : 750 V
Exe : 550 V
Exi : 60 V
13,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0029U
ATEX certificate
Accessories
1
2 Circuit separator
2
5
7
6
8
9
10
12
13
14
grey
yellow
grey
5 Assembled jumper bar
(without IP20 protection)
6 Assembled jumper bar
(with IP20 protection)
7 Jumper bar not assembled
Post + screw + washer
8 Jumper bar not assembled
Post + washer + captive screw IP20
9 Jumper bar
10 Screwless jumper bar to be
inserted into ADO jaw
orange IP20
11 Pivoting jumper bar
12 Connector plate
13 Shielding connector
th. 0,5
th. 0,8
14 Protection label
FEMAD3
FEMAD3
SCAD5
Exi : 90 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0021U
P/N Type
Type
1 End section
11
D 1,5/6.ADO.Ex
Spacing 5 mm .200"
th. 3
th. 3
1SNA 199 341 R0500 FEMAD3
1SNA 199 343 R0700 FEMAD3
1SNA 199 551 R2000 SCAD
P/N
th. 3
th. 3
1SNA 199 341 R0500
1SNA 199 343 R0700
1SNA 199 551 R2000
BJM5 (1)
see accessories BJM6 (1)
see accessories
BJMI5 (1)
see accessories BJMI6 (1)
see accessories
BJS5 (1)
EV5
see accessories
BJB
BJADO5...
CBM5
CBM8
Screw for protection label
15 Manual tool
16 Semi-automatic tool
17 Interchangeable head kit
OUMAD
OUPAD
OUTA
R See markers section
RC55 - RC510 - RTM 7
BJS6 (1)
EV6I
see accessories BJB
see accessories BJADO6...
see accessories
see accessories
see accessories
BJP6
EL6
1SNA 178 745 R1400 CBM5
1SNA 178 746 R1500 CBM8
EP6
1SNA 174 413 R1400
1SNA 173 627 R2100
1SNA 178 745 R1400
1SNA 178 746 R1500
1SNA 163 427 R1700
VSP6
1SNA 179 466 R0600 OUMAD
1SNA 178 944 R0400 OUPAD
1SNA 205 284 R0300 OUTA
1SNA 163 433 R1500
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
15
16
17
RC65 - RC610 - RTM7
(1) A circuit separator SC.... is required with these accessories.
33
T07096
D 2,5/8.ADO.Ex
Terminal blocks
Insulation displacement
ADO - ADO
A
1
D 4/8.ADO.Ex
Spacing 8 mm .315"
Spacing 8 mm .315"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
Rail
Rail
Rail
th. 9 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADL
BAM2
PR3.Z2
PR4
PR5
V0
V0
1SNA 399 903 R0200
1SNA 296 351 R0000
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Standard 8 mm block - * Black
marking
D 2,5/8.P.ADO.Ex
Spacing 8 mm .315"
Terminal blocks for
ground wires UL 94 V0
Terminal block for ground wire with
rail contact - * White marking
P/N Type
P/N
Grey body
Blue body
D 2,5/8.ADO.Ex
D 2,5/8.N.ADO.Ex
1SNA 146 038 R2300 D 4/8.ADO.Ex
1SNA 146 039 R2400 D 4/8.N.ADO.Ex
1SNA 146 076 R2100
1SNA 146 077 R2200
Green/yellow body (with rail contact)
D 2,5/8.P.ADO.Ex
1SNA 146 041 R2600 D 4/8.P.ADO.Ex
1SNA 146 080 R2200
Characteristics
Wire size
D 4/8.P.ADO.Ex
Spacing 8 mm .315"
Terminal block for ground wire with
rail contact - * Black marking
Type
Standard blocks UL 94 V0
Standard 8 mm block - * White
marking
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
IEC
IEC
NFC DIN
NFC DIN
Screw
1 - 2.5
1 - 2.5
2.5 mm2
300 A / 1 s
Exe : 420 V
Exi : 90 V
FEMAD3
SCAD
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0029U
P/N Type
Type
grey
grey
Exi : 190 V
32 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0021U
Accessories
1 End section
2 Circuit separator
Exe : 420 V
24 A
ATEX certificate
1
2.5 - 4
4
4 mm2
480 A / 1 s
th. 3
1SNA 199 341 R0500 FEMAD3
1SNA 196 896 R0000 SCAD
P/N
th. 3
1SNA 199 341 R0500
1SNA 196 896 R0000
2
5
7
5 Assembled jumper bar
(without IP20 protection)
6 Assembled jumper bar
(with IP20 protection)
7 Jumper bar not assembled
Post + washer + captive screw IP20
BJM8 (1)
see accessories BJM8 (1)
see accessories
BJMI8 (1)
see accessories BJMI8 (1)
see accessories
BJS8 (1)
EV6I
see accessories BJS8 (1)
EV6I
see accessories
6
9
10
11
12
9
10
11
Jumper bar
Pivoting jumper bar
Connector plate
Protection label
1SNA 199 466 R2300
1SNA 174 448 R0700
1SNA 173 627 R2100
1SNA 163 427 R1700
1SNA 163 428 R2000
1SNA 163 433 R1500
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
Screw for protection label
13 Manual tool
14 Semi-automatic tool
15 Interchangeable head kit
BJB
BJP8
EL6
EP6
EP8
VSP6
OUMAD
OUPAD
OUTA
R See markers section
RCAL85 - RC610 - RTM7
BJB
BJP8
EL6
EP6
EP8
VSP6
OUMAD
OUPAD
OUTA
1SNA 199 466 R2300
1SNA 174 448 R0700
1SNA 173 627 R2100
1SNA 163 427 R1700
1SNA 163 428 R2000
1SNA 163 433 R1500
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
12
13
14
15
R
RCAL85 - RC610 - RTM7
(1) A circuit separator SC.... is required with these accessories.
34
T07097
D 1,5/6.D2.ADO.Ex
Double deck terminal blocks
Insulation displacement
ADO - ADO
Spacing 6 mm .238"
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
A
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
Rail
Rail
Rail
th. 12 mm
th. 9,1 mm
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADH
BAMH V0
PR3.Z2
PR4
PR5
V2
V0
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
1
Terminal block 6 mm, double deck
opened.
Type
Standard blocks UL 94 V0
Grey body
Blue body
1SNA 146 062 R2300
1SNA 146 063 R2400
IEC
Characteristics
Wire size
P/N
D 1,5/6.D2.ADO.Ex
D 1,5/6.D2.N.ADO.Ex
NFC DIN
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
Screw
0.28 - 1.5
0.34 - 1.5
1.5 mm2
Exe : 550 V
Exi : 375 V
17.5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0029U
ATEX certificate
Accessories
Type
1 End section
2 Circuit separator
1
2
grey
grey
5 Assembled jumper bar without IP20
6 Assembled jumper bar with IP20
7 Jumper bar not assembled
Post + washer + captive screw IP20
FED2AD2
SCAD
BJM6
BJMI6
BJS6
EV6I
P/N
th. 5
1SNA 199 476 R2500
1SNA 196 896 R0000
see accessories
see accessories
20 poles 1SNA 174 784 R2000
1SNA 206 394 R0200
6
5
7
9
10
12
11
13
14
9 Jumper bar
10 Svrewless jumper bar to be inserted
into ADO jaw
orange IP20
11 Pivoting jumper bar
12 Jumper bar for alternated jumping
13 Connector plate
14 Vertical jumper bar
15 Shielding connector
16 Protection label
Screw for protection label
17 Manual tool
18 Semi-automatic tool
19 Interchangeable head kit
BJB
BJADO6...
R See markers section
RC65 - RC610 - RTM7
BJP6
BJA6
EL6
ITVE
CBD2S
EP6
VSP6
OUMAD
OUPAD
OUTA
1SNA 199 466 R2300
see accessories
1SNA 174 413 R1400
10 poles 1SNA 116 541 R1200
1SNA 173 627 R2100
1SNA 179 694 R0300
1SNA 178 408 R1400
4 blocks 1SNA 163 427 R1700
1SNA 163 433 R1500
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
15
16
17
18
19
R
(1) A circuit separator SC.... is required with these accessories.
35
T07098
Standard and ground
miniblocks
- Screw clamp - ADO
A
1
DR... 4/6.ADO.Ex
Spacing 6 mm .238"
Mounting rail DIN 2
th. 6.5 mm
th. 12 mm
th. 9,1 mm
15 x 5 x 1
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
BADRL
BADH
BAMH V0
PR2
PR3.Z2
PR4
PR5
V0
V2
V0
DR 4/6.PI.ADO.Ex
Spacing 6 mm .238"
Mounting rail DIN 2
1SNA 199 420 R2100
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 164 600 R1200
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Type
Standard blocks UL 94 V0
Terminal blocks for
ground wires UL 94 V0
Grey body
Orange body
Grey body (without rib)
Blue body
Yellow body/green (without rail contact)
DR 4/6.PI.ADO.Ex
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
ATEX certificate
Accessories
4 End section kit with
screw locks (right + left)
5 Separator
2
grey
grey
grey
orange
grey
orange
grey
orange
6 Test device
4
3
5
6
8
7
P/N
1SNA 146 064 R2500 DB 4/6.ADO.Ex
1SNA 146 210 R0000
1SNA 146 065 R2600
IEC
IEC
IEC
NFC DIN
NFC DIN
NFC DIN
0.2 - 4
0.22 - 4
0.28 - 1.5
0.34 - 1.5
1.5 mm2
0.2 - 4
0.22 - 4
0.28 - 1.5
0.34 - 1.5
1.5 mm2
9.5 mm / .37"
0,5-0,8 Nm / 4,4-7,1 Ib-in
Exe : 420 V
Exi : 190 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0032U
9.5 mm / .37"
0,5-0,8 Nm / 4,4-7,1 Ib-in
Exe : 420 V
Exi : 190 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0032U
Type
1 End stop (DIN 2)
2 End stop (DIN 3)
3 End section
P/N Type
1SNA 146 202 R0500 DS 4/6.ADO.Ex
1SNA 146 208 R1300
1SNA 146 209 R1400
DS 4/6.N.ADO.Ex
1SNA 146 203 R0600
0.2 - 4
0.22 - 4
0.28 - 1.5
0.34 - 1.5
1.5 mm2
180 A / 1 s
9.5 mm / .37"
0,5-0,8 Nm / 4,4-7,1 Ib-in
Exe : 420 V
Exi : 190 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0032U
Screw
1
P/N Type
DR 4/6.ADO.Ex
DR 4/6.ADO.Ex
DRE 4/6.ADO.Ex
Characteristics
Wire size
DB 4/6.ADO.Ex
Spacing 6 mm .238"
Base mount with flanges
DIN 2 /
DIN 3 /
Base mount
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
End stop
Rail
Rail
Rail
Rail
DS 4/6... ADO.Ex
Spacing 6 mm .238"
Mounting rail DIN 3
P/N Type
BADRL V0
th. 6.5
1SNA 199 420 R2100
FEAD1 V0
FEAD1 V0
th. 2.5
th. 2.5
BADL V0
1SNA 199 421 R1600 FEAD1 V0
1SNA 199 422 R1700 FEAD1 V0
FEAD5 V0
FEAD5 V0
DCJ
th. 5.0
th. 5.0
1SNA 199 433 R1200 FEAD5 V0
1SNA 199 434 R1300 FEAD5 V0
1SNA 173 059 R0300 DCJ
7 Test plug
8 Screwless jumper bar to be
inserted into ADO jaw orange IP20
9 Comb-type jumper bar
InsulatinG
10 IDC jumper
11 Manual tool
12 Semi-automatic tool
13 Interchangeable head kit
14 Pneumatic tool kit
15 Extraction tool kit
FC2
BJADO6...
R See markers section
Top of block RC65 - RCAL85
PC6
EIP
OUMAD
OUPAD
OUTA
OUTAD
EXAD2
DIA. 2 1SNA 007 865 R2600 FC2
see accessories BJADO6...
see accessories PC6
1SNA 113 550 R2400 EIP
AD2,5 V2
1SNA 179 466 R0600 OUMAD
1SNA 178 944 R0400 OUPAD
1SNA 205 284 R0300 OUTA
1SNA 205 710 R1100 OUTAD
1SNA 205 721 R0000 EXAD2
P/N Type
th. 9.0
th. 2.5
th. 2.5
th. 5.0
th. 5.0
P/N
1SNA 399 903 R0200
1SNA 199 421 R1600
1SNA 199 422 R1700
FEAD3 V0
FEAD3 V0
1SNA 199 433 R1200 FEAD5 V0
1SNA 199 434 R1300 FEAD5 V0
1SNA 173 059 R0300 DCJ V2
DIA. 2 1SNA 007 865 R2600 FC2
see accessories BJADO6...
see accessories
1SNA 113 550 R2400
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
1SNA 205 710 R1100
1SNA 205 721 R0000
PC6
EIP
AD2,5 V2
OUMAD
OUPAD
OUTA
OUTAD
EXAD2
th. 5.0
th. 5.0
1SNA 199 437 R1600
1SNA 199 438 R2700
1SNA 199 433 R1200
1SNA 199 434 R1300
1SNA 173 059 R0300
DIA. 2 1SNA 007 865 R2600
see accessories
see accessories
1SNA 113 550 R2400
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
1SNA 205 710 R1100
1SNA 205 721 R0000
10
9
11
12
13
14
15
R
36
Top of block RC65 - RCAL85
Top of block RC65 - RCAL85
T07099
DR 4/8.ADO.Ex
Standard and ground
miniblocks
- Screw clamp - ADO
Spacing 8 mm .315"
Mounting rail DIN 2
DIN 2
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
Rail
th. 6.5 mm
15 x 5 x 1
BADRL
PR2
V0
DR 4/8.PI.ADO.Ex
1
1SNA 199 420 R2100
1SNA 164 600 R1200
Type
P/N
Standard blocks UL 94 V0
Grey body
DR 4/8.ADO.Ex
1SNA 146 255 R0100
Terminal blocks for
ground wires UL 94 V0
Yellow body/green (without rail contact)
DR 4/8.PI.ADO.Ex
1SNA 146 204 R0700
IEC
Characteristics
Wire size
A
Spacing 8 mm .315"
Mounting rail DIN 2
NFC DIN
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
0.2 - 4
0.22 - 4
1 - 2.5
1 - 2.5
2.5 mm2
300 A / 1 s
9.5 mm / .37"
0,5-0,8 Nm / 4,4-7,1 Ib-in
Exe : 550 V
Exi : 375 V
24 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0032U
Screw
ATEX certificate
Accessories
Type
1 End stop (DIN 2)
2 End section
1
3 Separator
grey
grey
orange
grey
orange
BADRL V0
FEAD1 V0
FEAD1 V0
FEAD5 V0
FEAD5 V0
P/N
th. 6.5
th. 2.5
th. 2.5
th. 5.0
th. 5.0
1SNA 199 420 R2100
1SNA 199 421 R1600
1SNA 199 422 R1700
1SNA 199 433 R1200
1SNA 199 434 R1300
2
6
7
8
9
10
11
12
3
Comb-type jumper bar
IDC jumper
Manual tool
Semi-automatic tool
Interchangeable head kit
Pneumatic tool kit
Extraction tool kit
PC8
AD2,5 V2
OUMAD
OUPAD
OUTA
OUTAD
EXAD2
see accessories
1SNA 114 205 R2000
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
1SNA 205 710 R1100
1SNA 205 721 R0000
6
7
8
9
10
11
12
R
R See markers section
Top of block RCAL85
37
T07091
DR 1,5/6.ADO.Ex
Standard and ground
miniblocks
- ADO - ADO
A
1
DIN 2 /
Spacing 6 mm .238"
Mounting rail DIN 2
DIN 3
Exe and Exi voltage ratings apply
to terminal blocks only without any
accessory. The use of ground
terminal blocks do not decrease the
standard terminal blocks' voltage
ratings.
2 wires max. same gage and nature per ADO connection.
For the terminal block voltage rating with its accessories,
consult our "ATEX technical instructions sheet for safe
mounting".
End stop
End stop
End stop
Rail
Rail
Rail
Rail
th. 6.5 mm
th. 12 mm
th. 9,1 mm
15 x 5 x 1
35 x 7,5 x 1
35 x 15 x 2,3
35 x 15 x 1,5
DS 1,5/6... ADO.Ex
Spacing 6 mm .238"
Mounting rail DIN 3
BADRL
BADH
BAMH V0
PR2
PR3.Z2
PR4
PR5
V0
V2
V0
DR 1,5/6.PI.ADO.Ex
Spacing 6 mm .238"
Mounting rail DIN 2
1SNA 199 420 R2100
1SNA 116 900 R2700
1SNA 194 836 R0100
1SNA 164 600 R1200
1SNA 174 300 R1700
1SNA 168 500 R1200
1SNA 168 700 R2200
Type
P/N Type
P/N
Standard blocks UL 94 V0
Grey body
Blue body
DR 1,5/6.ADO.Ex
1SNA 146 205 R0000 DS 1,5/6.ADO.Ex
DS 1,5/6.N.ADO.Ex
Terminal blocks for
ground wires UL 94 V0
Yellow body/green (without rail contact)
DR 1,5/6.PI.ADO.Ex
1SNA 146 206 R0100
Characteristics
Wire size
Rigid
Flexible
mm² / AWG
Rigid
ADO
Flexible
Rated wire size
mm² / AWG
Short-circuit current (for ground blocks) A / s
Wire stripping length
mm / inches
Recommended torque
Nm / Ib.in
Voltage
EN 60079-7 ; EN 50020
Current
ATEX marking
IEC
IEC
NFC DIN
NFC DIN
1SNA 146 066 R2700
1SNA 146 067 R2000
Screw
0.28 - 1.5
0.34 - 1.5
1.5 mm2
180 A / 1 s
0.28 - 1.5
0.34 - 1.5
1.5 mm2
Exe : 550 V
Exe : 550 V
Exi : 375 V
17,5 A
I M2 / M1
II 2G / 1G
Ex e/i I / II
LCIE 02 ATEX 0032U
ATEX certificate
Accessories
1
4 Separator
2
grey
grey
grey
orange
grey
orange
5 Screwless jumper bar to be
inserted into ADO jaw orange IP20
6 Manual tool
7 Semi-automatic tool
8 Interchangeable head kit
9 Pneumatic tool kit
10 Extraction tool kit
3
P/N Type
Type
1 End stop (DIN 2)
2 End stop (DIN 3)
3 End section
BADRL V0
th. 6.5
1SNA 199 420 R2100
FEAD2 V0
FEAD2 V0
FEAD6 V0
FEAD6 V0
BJADO6...
th. 2.5
th. 2.5
th. 5.0
th. 5.0
1SNA 199 423 R1000
1SNA 199 424 R1100
1SNA 199 435 R1400
1SNA 199 436 R1500
OUMAD
OUPAD
OUTA
OUTAD
EXAD2
Exi : 375 V
17,5 A
I M2 / M1
II 2GD / 1GD
Ex e/i I / II
LCIE 02 ATEX 0032U
BADL V0
FEAD2 V0
FEAD2 V0
FEAD6 V0
FEAD6 V0
see accessories BJADO6...
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
1SNA 205 710 R1100
1SNA 205 721 R0000
OUMAD
OUPAD
OUTA
OUTAD
EXAD2
P/N
th. 9.0
th. 2.5
th. 2.5
th. 5.0
th. 5.0
1SNA 399 903 R0200
1SNA 199 423 R1000
1SNA 199 424 R1100
1SNA 199 435 R1400
1SNA 199 436 R1500
see accessories
1SNA 179 466 R0600
1SNA 178 944 R0400
1SNA 205 284 R0300
1SNA 205 710 R1100
1SNA 205 721 R0000
4
5
6
7
8
9
10
R
38
R See markers section
Top of block RC65 - RCAL85
Top of block RC65 - RCAL85
T07091
Numerical and alphabetical index
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
007
103
103
103
103
103
103
103
113
113
113
113
113
113
113
114
114
116
116
116
116
116
116
118
118
126
126
127
128
128
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
865
002
061
065
125
126
775
776
003
102
482
544
548
550
851
205
825
541
720
728
771
900
934
495
707
576
629
600
499
618
001
002
003
004
005
006
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
R2600
R2600
R2000
R2400
R1500
R1600
R0000
R0100
R1000
R1000
R0500
R1200
R2600
R2400
R1600
R2000
R0500
R1200
R2100
R2500
R2000
R2700
R0400
R1700
R0300
R1700
R2400
R0500
R2500
R0300
R2700
R2000
R2100
R2200
R2300
R2400
R0700
R2300
R1000
R1100
R1200
R1300
R1400
R1500
R1600
R2700
R2000
R2500
R1200
R1300
R1400
R1500
R1600
R1700
R1000
R2100
R2200
R2700
R1400
R1500
R1600
R1700
R1000
R1100
R1200
R2300
R2400
R0100
R2600
R2700
R2000
R2100
R2200
R2300
R2400
R0500
R0600
R0300
R2000
R2100
R2200
R2300
R2400
R2500
R2600
R0700
R0000
R0500
R2200
R2300
R2400
R2500
R2600
R2700
R2000
R0100
R0200
R0700
R2400
R2500
36
26
16
15
14
14
18
18
14
15
17
14
14
14
16
18
14
32
17
14
18
16
16
17
14
14
14
24
17
15
14
14
15
15
15
15
17
14
14
14
14
14
14
14
17
17
17
16
15
15
14
16
16
16
15
15
16
16
30
30
30
30
30
33
33
34
34
33
34
30
15
16
32
32
27
27
25
25
25
25
25
25
25
25
25
27
27
27
27
35
35
36
36
38
38
16
33
33
30
30
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
163
163
163
163
163
163
163
163
163
163
163
163
163
163
163
164
164
164
164
164
164
164
164
164
164
164
164
073
074
075
076
077
078
079
080
081
098
104
118
120
122
130
132
134
138
140
199
200
201
202
203
204
205
206
207
208
209
210
211
212
227
237
238
239
240
245
246
247
251
253
255
259
260
261
262
263
269
270
271
272
273
276
277
279
285
289
291
293
302
303
304
305
306
307
308
309
310
311
350
352
043
050
181
261
311
313
315
394
427
428
429
430
431
432
433
573
574
575
576
581
582
583
584
585
586
587
588
R2600
R2700
R2000
R2100
R2200
R0300
R0400
R2200
R1700
R2000
R2300
R2000
R2600
R1400
R2000
R1600
R1000
R2400
R0200
R2200
R1700
R0400
R0500
R0600
R0700
R0000
R0100
R0200
R1300
R1400
R0000
R2500
R2600
R2500
R2700
R0000
R0100
R1600
R0700
R0000
R0100
R0500
R0700
R0100
R1500
R1200
R0700
R0000
R0100
R1700
R1400
R0100
R0200
R0300
R0600
R0700
R1100
R2000
R0400
R2600
R2000
R0100
R0200
R0300
R0400
R0500
R0600
R1700
R1000
R0400
R2100
R1400
R0200
R2100
R0400
R1100
R0000
R2200
R2400
R2600
R2600
R1700
R2000
R2100
R2600
R1300
R1400
R1500
R2200
R2300
R2400
R2500
R1300
R1400
R1500
R1600
R1700
R1000
R1100
R2200
16
30
33
34
34
31
31
34
31
18
18
28
28
28
28
28
28
28
28
24
24
24
36
36
37
38
38
29
36
36
36
19
19
20
14
15
15
14
14
29
29
27
27
37
14
17
14
14
29
16
15
16
19
19
24
24
29
14
16
15
24
21
21
21
22
22
21
21
21
22
22
19
26
32
14
19
32
17
15
15
19
14
15
15
15
16
15
14
19
19
19
19
19
19
19
19
19
19
19
19
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
164
164
164
168
168
168
168
168
168
168
168
168
168
168
168
168
168
168
168
168
168
168
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
173
174
174
174
174
174
174
174
174
174
174
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
177
177
177
177
177
177
177
177
600
736
737
238
273
400
485
500
516
517
518
519
520
521
522
523
629
664
700
962
973
974
016
059
147
206
207
217
218
219
221
223
226
316
317
318
319
320
323
327
328
331
515
516
517
519
520
530
627
888
112
113
114
115
300
413
448
784
788
789
226
227
228
229
230
259
260
278
279
280
281
282
663
664
665
666
667
669
670
671
672
673
675
676
677
678
679
736
737
738
739
740
508
509
510
511
651
652
653
654
R1200
R2500
R2600
R1600
R1100
R1600
R2700
R1200
R2500
R2600
R0700
R0000
R0500
R2200
R2300
R2400
R1600
R1100
R2200
R0400
R0700
R0000
R1000
R0300
R2000
R0400
R0500
R2600
R0700
R0000
R2200
R2400
R2700
R2100
R2200
R0300
R0400
R0100
R2000
R2400
R0500
R2000
R1100
R1200
R1300
R2500
R2200
R2400
R2100
R2000
R1600
R1700
R1000
R1100
R1700
R1400
R0700
R2000
R0400
R0500
R2200
R2300
R0400
R0500
R0200
R1300
R1000
R1600
R1700
R0500
R2200
R2300
R0000
R0100
R0200
R0300
R0400
R1600
R1300
R0000
R0100
R0200
R0400
R0500
R0600
R1700
R1000
R2100
R2200
R0300
R0400
R1100
R0700
R0000
R2400
R1100
R0500
R0600
R0700
R0000
24
19
19
16
19
17
17
14
19
19
19
19
19
19
19
19
14
15
14
17
19
19
24
36
16
24
24
24
24
24
24
24
24
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
14
19
24
24
24
24
14
30
30
14
19
15
17
17
17
17
17
17
17
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
17
17
17
17
17
16
16
16
16
17
14
15
15
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
177
178
178
178
178
178
178
178
178
178
178
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
190
190
190
190
193
194
196
198
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
205
205
205
205
205
205
205
205
205
205
205
205
205
205
205
205
206
290
290
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
812
024
025
026
027
032
033
408
745
746
944
466
613
614
615
616
617
626
627
628
629
630
631
668
669
670
671
672
694
016
017
018
019
482
836
896
618
302
304
305
306
336
339
341
343
417
420
421
422
423
424
433
434
435
436
437
438
466
476
551
284
710
721
767
768
769
770
771
772
773
774
775
776
777
778
779
394
281
282
041
042
051
052
061
062
077
102
103
104
105
106
107
108
109
110
122
123
128
129
144
R1700
R2500
R2600
R2700
R2000
R2500
R2600
R1400
R1400
R1500
R0400
R0600
R0100
R0200
R0300
R0400
R0500
R0600
R0700
R1000
R1100
R1600
R0300
R2000
R2100
R2600
R1300
R1400
R0300
R1600
R1700
R2000
R2100
R0600
R0100
R0000
R0200
R0700
R0100
R0200
R0300
R2000
R0300
R0500
R0700
R1200
R2100
R1600
R1700
R1000
R1100
R1200
R1300
R1400
R1500
R1600
R2700
R2300
R2500
R2000
R0300
R1100
R0000
R1600
R2700
R2000
R2500
R1200
R1300
R1400
R1500
R1600
R1700
R1000
R2100
R2200
R0200
R0100
R0200
R2000
R2100
R2200
R2300
R2400
R2500
R2400
R2300
R2400
R2500
R2600
R2700
R2000
R0100
R0200
R2600
R1600
R1700
R2400
R2500
R2400
18
18
18
18
18
18
18
32
14
14
30
30
16
16
16
16
16
15
16
15
15
15
15
17
17
17
17
17
32
21
21
21
22
17
16
30
15
14
16
14
26
30
30
33
33
32
24
36
36
38
38
36
36
38
38
36
36
32
35
30
30
36
36
21
21
21
22
22
21
21
21
21
21
21
22
22
14
29
29
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
27
27
27
27
27
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
1SNA
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
291
296
399
399
399
399
399
399
145
150
160
161
162
170
194
195
301
302
311
312
322
323
324
325
352
362
372
461
462
472
474
476
478
480
482
484
351
563
571
572
574
621
903
R2500
R0600
R0000
R2500
R2600
R0200
R1700
R1000
R0200
R0300
R2300
R2400
R2600
R2700
R2000
R2100
R0400
R0600
R0000
R2200
R2300
R2500
R2700
R2100
R0300
R2200
R1000
R1200
R0000
R0400
R0400
R0500
R0700
R0600
R0200
27
25
25
27
27
27
27
27
29
29
29
29
29
29
29
29
25
25
25
28
28
28
28
28
28
28
28
28
14
28
28
28
28
28
14
D
D 1/5.ADO.Ex
D 1/5.N.ADO.Ex
D 1/5.P.ADO.Ex
D 10/10.2L.Ex
D 10/10.N.2L.Ex
D 10/10.P.2L.Ex
D 120/42.FF.Ex
D 1,5/6.ADO.Ex
D 1,5/6.D2.ADO.Ex
D 1,5/6.D2.N.ADO.Ex
D 1,5/6.N.ADO.Ex
D 1,5/6.P.ADO.Ex
D 16/12.2L.Ex
D 16/12.N.2L.Ex
D 16/12.P.2L.Ex
D 185/55.FF.Ex
D 2,5/5... ..2L.2L.Ex
D 2,5/5... .2L.Ex
D 2,5/5... .3L.Ex
D 2,5/5... .4L.Ex
D 2,5/5.2L.2L.Ex
D 2,5/5.2L.Ex
D 2,5/5.3L.Ex
D 2,5/5.4L.Ex
D 2,5/5.ADO.Ex
D 2,5/5.I.3L.Ex
D 2,5/5.N.2L.2L.Ex
D 2,5/5.N.2L.Ex
D 2,5/5.N.3L.Ex
D 2,5/5.N.4L.Ex
D 2,5/5.N.ADO.Ex
D 2,5/5.P.2L.Ex
D 2,5/5.P.3L.Ex
D 2,5/5.P.4L.Ex
D 2,5/5.P.ADO.Ex
D 2,5/6.DA...Ex
D 2,5/6.DA.Ex
D 2,5/6.DA.N.Ex
D 2,5/8.ADO.Ex
D 2,5/8.N.ADO.Ex
D 2,5/8.P.ADO.Ex
D 300/55.FF.Ex
D 35/16.2L.Ex
D 35/16.N.2L.Ex
D 35/16.P.2L.Ex
D 35/27.FF.Ex
D 36/16.2L.Ex
D 4/6... .2L.Ex
D 4/6.2L.Ex
D 4/6.ADO.Ex
D 4/6.D2.ADO.Ex
D 4/6.D2.N.ADO.Ex
D 4/6.N.2L.Ex
D 4/6.N.ADO.Ex
D 4/6.P.2L.Ex
D 4/6.P.ADO.Ex
D 4/8.ADO.Ex
D 4/8.N.ADO.Ex
D 4/8.P.ADO.Ex
D 6/8... .2L.Ex
D 6/8.2L.Ex
D 6/8.ADO.Ex
33
33
33
28
28
28
21
33
35
35
33
33
28
28
28
22
27
25
25
25
27
25
25
25
30
26
27
25
25
25
30
25
25
25
30
18
18
18
34
34
34
22
28
28
28
21
28
27
27
30
32
32
27
30
27
30
34
34
34
27
27
30
D 6/8.ADO3.Ex
D 6/8.N.2L.Ex
D 6/8.N.ADO.Ex
D 6/8.N.ADO3.Ex
D 6/8.P.2L.Ex
D 6/8.P.ADO.Ex
D 6/8.P.ADO3.Ex
D 70/32.FF.Ex
DB 2,5/5.2L.Ex
DB 2,5/5.N.2L.Ex
DB 4/6.ADO.Ex
DR 1,5/6.ADO.Ex
DR 1,5/6.PI.ADO.Ex
DR 2,5/10.P.4L.Ex
DR 2,5/5.2L.Ex
DR 2,5/5.N.2L.Ex
DR 4/6... .Ex
DR 4/6.1.Ex
DR 4/6.1.N.Ex
DR 4/6.ADO.Ex
DR 4/6.Ex
DR 4/6.N.Ex
DR 4/6.P.Ex
DR 4/6.PI.ADO.Ex
DR 4/8.ADO.Ex
DR 4/8.PI.ADO.Ex
DR... 4/6.ADO.Ex
DRE 4/6.ADO.Ex
DS 1,5/6... ADO.Ex
DS 1,5/6.ADO.Ex
DS 1,5/6.N.ADO.Ex
DS 4/6... ADO.Ex
DS 4/6.ADO.Ex
DS 4/6.N.ADO.Ex
31
27
30
31
27
30
31
21
29
29
36
38
38
29
29
29
24
24
24
36
24
24
24
36
37
37
36
36
38
38
38
36
36
36
M
M 10/10...Ex
M 10/10.Ex
M 10/10.N.Ex
M 10/10.P.Ex
M 10/10.PI.Ex
M 10/10.RS.Ex
M 16/12...Ex
M 16/12.Ex
M 16/12.N.Ex
M 16/12.P.Ex
M 35/16...Ex
M 35/16.Ex
M 35/16.N.Ex
M 35/16.P.Ex
M 4/6...Ex
M 4/6.3A...Ex
M 4/6.3A.Ex
M 4/6.3A.N.Ex
M 4/6.4A...Ex
M 4/6.4A.Ex
M 4/6.4A.N.Ex
M 4/6.D2.Ex
M 4/6.Ex
M 4/6.N.Ex
M 4/6.P.Ex
M 4/6.PI.Ex
M 4/6.RS.Ex
M 6/8...Ex
M 6/8.Ex
M 6/8.N.Ex
M 6/8.P.Ex
M 6/8.PI.Ex
M 6/8.RS.Ex
M 70/22...Ex
M 70/22.Ex
M 70/22.N.Ex
M 70/22.P.Ex
M 70/22.PI.Ex
M 95/26...Ex
M 95/26.Ex
M 95/26.N.Ex
M 95/26.P.Ex
MA 2,5/5...Ex
MA 2,5/5.D2... .Ex
MA 2,5/5.D2.1.Ex
MA 2,5/5.D2.Ex
MA 2,5/5.D2.N.Ex
MA 2,5/5.Ex
MA 2,5/5.N.Ex
MA 2,5/5.P.Ex
MA 2,5/5.PI.Ex
MTC 6.Ex
15
15
15
15
15
19
15
15
15
15
16
16
16
16
14
14
14
14
14
14
14
17
14
14
14
14
19
15
15
15
15
15
19
16
16
16
16
16
16
16
16
16
14
17
17
17
17
14
14
14
14
20
39
A
1
ABB France
Automation Products Division
Export Department
10, rue Ampère Z.I. - B.P. 114
F-69685 Chassieu cedex / France
Tel. : +33 (0)4 7222 1722
Fax :+33 (0)4 7222 1935
1SNC 160 004 C0204
As part of its on-going product improvement, ABB
reserves the right to modify the characteristics or the
products described in this document.
The information given is not-contractual. For further
details please contact the ABB company marketing
these products in your country.

Similar documents

Terminal blocks

Terminal blocks Separator end section

More information

Entrelec Catalog

Entrelec Catalog Heavy duty switch terminal blocks with blade Double deck

More information

Complete Catalog for entrelec Terminals

Complete Catalog for entrelec Terminals - Advanced testing (simulation, dielectric control, etc.) prior customer acceptance with TC test connectors, - Overvoltage protection and temperature control with PG5-R2 components holder.

More information

Interfast Terminal blocks

Interfast Terminal blocks 1 SC or FE is required with the use of these accessoriesfor isolate each circuit or for a voltage > to 250 V. 2 Use of these accessories requires the cut-out of the block Other accessories see sect...

More information

Terminal Blocks

Terminal Blocks Spring miniblocks ............................................................................................. page 20 ADO miniblocs ..................................................................

More information