Crabber prices SIBS 2014
Transcription
Crabber prices SIBS 2014
Price List September 2014 Dinghy Page 3 - 5 Classic Page 6 - 17 Dinghy Cornish Limpet RCD Category D Construction Hand laid GRP hull & deck. Decks are Off White. Standard hull colours - Off White, Dark Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with external solid teak rubbing bands. The hull is complete with GRP centre board, laminated plywood rudder with lifting GRP blade. Varnished wooden tiller. All associated fittings and sheets. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens Cetol as standard. Sails are in dark tan. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. Adventure Page 18 - 23 Cornish Limpet balanced Lug sail standard boat Clam Page 24 - 29 Mystery 3,490.00 Aluminium trolley Galvanised launching trolley Galvanised combi road / launching trolley Top cover - Weathermax Under cover for towing - Weathermax Rowing pack - oars, rowlocks and stowage Non standard hull / deck colours Cream sail in lieu of tan Delivery per mile (on road trailer) Commissioning / launching 325.00 395.00 960.00 260.00 260.00 155.00 135.00 60.00 2.00 POA Page 30 - 33 Notes Page 34 - 35 Page 2 Total Prices are in Pounds sterling and include VAT @ 20% Page 3 Dinghy Cornish Cormorant RCD Category D Construction Hand laid GRP hull & deck. Decks are Off White. Standard hull colours - Off White, Dark Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with external solid teak rubbing bands. The hull is complete with GRP centre board, laminated plywood rudder with lifting GRP blade. Varnished wooden tiller. All associated fittings and sheets. Rig Gunter or balanced Lug options. The main mast and spars are from Sitka Spruce, treated with Sikkens Cetol as standard. Sails are in dark tan. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. Cornish Cormorant balanced Lug sail standard boat Cornish Cormorant Gunter rig standard boat Galvanised launching trolley Galvanised combi road / launching trolley Top cover - Weathermax (mast down) Top cover - Weathermax (mast up) Under cover for towing - Weathermax Rowing pack - oars, rowlocks and stowage Non standard hull / deck colours Cream sail in lieu of tan Delivery per mile (on road trailer) Commissioning / launching 5,990.00 6,990.00 425.00 995.00 340.00 375.00 340.00 275.00 135.00 60.00 2.00 POA Total Page 4 Prices are in Pounds sterling and include VAT @ 20% Dinghy Adventure 12 RCD Category D Construction Hand laid GRP hull & deck. Decks are Off White. Standard hull colours - Off White, Dark Blue, Cornish Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with external plastic / rubber rubbing bands. The hull is complete with plywood centre board, laminated plywood rudder with lifting blade. Varnished wooden tiller. All associated fittings and sheets. Rig Gunter or Bermudan options. The main mast and spars are aluminium. Sails are in white. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. Adventure 12 standard boat 5,990.00 Spinnaker pack - sail, halyard, sheets, blocks, jammers & launching bags Jib pack - sail, halyard, sheets, blocks & jammers (std on Ad12) Mast up cover Mast down cover Under cover - for towing Toe straps Launching or yard trolley Combi road trailer / launching trolley Rowing pack - oars, rowlocks, painted plywood rowing thwart Storage hatches Torqueedo travel 503 S Teak colour rubbing band Non standard hull / deck colours Delivery per mile (on road trailer) Commissioning / launching 795.00 365.00 350.00 315.00 325.00 95.00 425.00 995.00 275.00 145.00 1,395.00 350.00 135.00 2.00 POA Total Prices are in Pounds sterling and include VAT @ 20% Page 5 Classic Classic RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours any combination - Off White, Dark Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with plexus and GRP bonding and external solid teak rubbing bands. The hull is complete with moulded mini bilge keels and galvanised steel lifting centre plate. Laminated plywood rudder with lifting stainless steel plate, hangings and tiller hood. Varnished wooden tiller. On Deck / Cockpit Cast aluminium fairleads and mooring cleats. A pivoting bow sprit with stainless steel mounting and tack fitting. Strong stainless steel tabernacle with mounting eyes to take halyard blocks. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Slatted teak side deck seating and folding internal teak seating. Fully self draining aft cockpit with folding spray hood to protect forward cockpit area. Forward cockpit cover. Outboard well to take up to 5hp petrol outboard. Locker lids and latches. Tiller extension. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens Cetol as standard.The standing rigging is 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan, white or cream and include mainsail & jib. Roller reefing spar with all controls back to the cockpit. All associated ropes and blocks. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. When a boat is built to order we will do our best to provide the owner with bespoke options where reasonable. Crabber 17 standard boat Crabber 17 16,950.00 Anchor - plough type 4.5kg c/w 30m x 12mm warp & 2m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Boat hook - with additional whisker pole attachments on mast Boat name and port Boarding ladder - fixed swim type Camping tent Compass - Silva handheld c/w external mounting bracket Cushions for forward v-berth including supports Fenders x 3. 19" x 5.5" white with Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Overall winter cover in PVC Non standard colours (per colour) Two tone decks (parchment or grey) EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock and strap Outboard - Mariner 4 HP 4 stroke c/w remote tank Outboard - Mariner 6 HP 4 stroke c/w remote tank Delivery per mile (on road trailer) Commissioning / launching 185.00 545.00 945.00 72.00 75.00 495.00 395.00 165.00 725.00 89.00 68.00 165.00 395.00 630.00 325.00 2,675.00 995.00 1,295.00 2.00 POA Total Page 6 Prices are in Pounds sterling and include VAT @ 20% Page 7 Classic Classic RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green. Hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. External solid teak rubbing bands. The hull is complete with moulded mini bilge keels and a galvanised steel lifting centre plate. Laminated plywood rudder with lifting stainless steel plate, stainless steel hangings and tiller hood. Wooden tiller. Engineering (Inboard diesel version only) Yanmar 1GM inboard diesel engine with 4 gal fixed fuel tank, associated engineering and stern gear. Fixed 2 blade propeller. Engine starting battery with isolation switch. Interior Choice of varnish or wood washed & painted interior finish with teak trim. Internal cushions with optional colours. Manual bilge pump, fire extinguisher, opening forward hatch, galley complete with single burner gas cooker, plastic sink and portable pumped water container. Classic or 4 berth layouts. On Deck Cast aluminium fairleads and mooring cleats. Pivoting bow sprit with stainless stem and tack fittings. Strong stainless steel tabernacle. Single round port light into cabin space. Sliding GRP hatch garage with varnished wood / perspex wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens as standard. The standing rigging is in 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan, white or cream and include mainsail & jib. Reefing headsail spar. All associated ropes and blocks. Mainsail cover. Cockpit cushions Compass - Silva handheld c/w external mounting bracket Fenders - 3 x 19" white with lanyards & Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Overall winter cover in PVC Rope cutter - knife type (inboard version only) Sprayhood on stainless steel frame Table for cockpit / cabin Teak cockpit seats & sole Toilet - portapotti Toilet - sea toilet Non standard colours (per colour) Two tone decks (parchment or grey) Autopilot - Raymarine ST1000 Battery c/w isolation switch (outboard version only) Bilge pump - auto electric in addition to standard manual pump 12 Volt socket - cigar type Echosounder - Raymarine ST40 Echosounder / Log - Raymarine ST40 Electric cabin light Fuse panel (required when electrics are added) Navigation lights (masthead) Solar panel 19.6v 5w VHF radio - Raymarine 49E VHF aerial with wind indicator Wind instrument - Raymarine ST40 EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock & straps Outboard - Mariner 4 HP 4 stroke c/w remote tank Outboard - Mariner 6 HP 4 stroke c/w remote tank Feathering prop - feather stream (in lieu of standard) UV protection on jib Beaching keels Whisker pole for racing Delivery per mile (on road trailer) Commissioning / launching Shrimper 19 Shrimper 19 outboard (excluding engine) standard boat Shrimper 19 inboard (including Yanmar 1GM 19hp) standard boat Anchor - 7kg plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Berth extensions - removable plywood bases and matching cushions Boat hook - with additional whisker pole attachments on mast Boat name and port Boarding ladder - fixed swim type Camping tent Clock & Barometer 110mm chrome Page 8 24,950.00 33,600.00 235.00 645.00 1,045.00 295.00 72.00 75.00 645.00 458.00 176.00 395.00 165.00 89.00 68.00 165.00 595.00 176.00 1,175.00 395.00 2,440.00 166.00 565.00 630.00 325.00 675.00 235.00 245.00 76.00 489.00 648.00 145.00 124.00 395.00 195.00 395.00 245.00 675.00 3,175.00 995.00 1,295.00 1,285.00 95.00 950.00 135.00 2.00 POA Total Prices are in Pounds sterling and include VAT @ 20% Page 9 Classic Classic RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green with the hull top plank in contrasting colour as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. Laminated plywood rudder with stainless steel hangings and tiller hood. Wooden tiller. Engineering Yanmar 2YM15 inboard diesel engine with 40ltr fixed fuel tank, associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Interior Choice of varnish or wood washed & painted interior finish with teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with double burner and grill, electric water pump and stainless steel sink with navigation table cover. On Deck Stainless steel mooring cleats and Samson post with pivoting bow sprit. Strong stainless steel tabernacle.Two round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens as standard. The standing rigging is in 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan, white or cream and include mainsail, jib & staysail with both headsails on rolling wire luffs. Mainsail cover. Crabber 22 standard boat Crabber 22 67,950.00 Anchor (9kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boarding ladder - fixed swim type Boat hook - with additional whisker pole attachments on mast Boat name and port Clock & Barometer - 115mm chrome Cockpit cushions Compass - Ritchie bulkhead mounted Eberspacher diesel heating - 2 outlets Fenders - 3 x 21" white with lanyards & Cornish Crabber logo Mooring warps 2 x 40' multiplait 12mm Overall winter cover in white PVC Pushpit, stanchions, guard wires and boarding ladder Rope cutter - spur type Teak cockpit seats and sole Toilet - portapotti inc fixings Toilet - sea toilet Holding tank 55 ltr with electric waste pump and deck flush Non standard colours (per colour) Two tone decks (parchment or grey) Autopilot - Raymarine ST2000 Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Navigation lights - mast mounted Shore power with smart battery charger - inc shore cable Solar panel 19.6v 5w VHF radio - Raymarine 49E VHF aerial with wind indicator Wind instrument - Raymarine i60 Feathering prop - feather stream (in lieu of standard) EU Type App’d braked road trailer - twin axle c/w lighting board, flushing hubs, hitch lock & straps Delivery / commissioning 245.00 725.00 1,425.00 595.00 72.00 75.00 375.00 385.00 322.00 2,910.00 98.00 91.00 527.00 2,954.00 565.00 2,325.00 166.00 565.00 1,250.00 630.00 325.00 852.00 165.00 76.00 930.00 389.00 1,595.00 195.00 395.00 235.00 1,095.00 1,295.00 5625.00 POA Total Page 10 Prices are in Pounds sterling and include VAT @ 20% Page 11 Classic Crabber 24 RCD Category B Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green with the hull top plank in a contrasting colour as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. Laminated plywood rudder with stainless steel hangings and tiller hood. Wooden tiller. Engineering Yanmar 3YM20 inboard diesel engine with 54ltr fixed stainless steel tank and associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Interior Choice of varnish or painted interior finish and teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with double burner with grill, manual water pump and stainless steel sink with navigation table cover. 3 / 5 berth options. Heads complete with marine toilet. On Deck Stainless steel mooring cleats and Sampson post with retracting bow sprit. Strong stainless steel tabernacle. Three round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Two tone deck option as standard. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens as standard. The standing rigging is in 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan, white or cream and include mainsail, jib & staysail with both headsails on rolling wire luffs. Navigation lights. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Classic Crabber 24 standard boat 83,500.00 Anchor (11kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Anchor (11kg) plough type c/w electric windlass, warp and chain Anchor - kedge (7kg) plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boat name and port Clock & Barometer - 115mm chrome Cockpit cushions Eberspacher diesel heating - 2 outlets Fenders - 4 x 31' white with lanyards and Cornish Crabber logo Holding tank 55 ltr with electric waste pump and deck flush Hot and cold pressurised water system - inc heads sink unit Mooring warps 2 x 40' multiplait 12mm Opening forward bulkhead inc berth cushions (5 berth option) Oven & grill upgrade in lieu of standard grill / hob unit Rope cutter - spur type Refrigeration system Sprayhood in acrylic cloth on stainless steel frame Teak cockpit seats and sole Topsail inc spars and controls Non standard hull colour (per colour) Two tone decks Autopilot - Raymarine ST2000 Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Shore power with smart battery charger - inc shore cable Solar panel 19.6v 5w VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Feathering prop - feather stream (in lieu of standard) Delivery / commissioning 366.00 1,695.00 235.00 825.00 1,695.00 75.00 375.00 385.00 2,910.00 165.00 1,250.00 1,975.00 91.00 1,750.00 1,125.00 565.00 928.00 1,350.00 2,470.00 1,250.00 630.00 345.00 852.00 165.00 76.00 930.00 1,595.00 195.00 630.00 1,095.00 1,285.00 POA Total Page 12 Prices are in Pounds sterling and include VAT @ 20% Page 13 Classic Classic RCD Category B Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark blue and Dark Green with the hull top plank in two tone as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. GRP rudder with stainless steel hangings and tiller hood. Wooden tiller. Engineering Yanmar 3YM20 inboard diesel engine with 60ltr diesel tank and associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Hot & cold pressurised water in galley & heads. Interior Choice of varnish or painted interior finish and teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with oven, double burner and grill, pressurised hot & cold water and stainless steel sink. Heads complete with marine toilet. On Deck Stainless steel mooring cleats and Sampson post with pivoting bow sprit. Strong stainless steel tabernacle. Three round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Two tone deck option as standard. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens as standard. The standing rigging is in 1 x 19 Dyform stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan or cream and include mainsail, jib & staysail with both headsails on rolling wire luffs. Navigation lights. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Crabber 26 standard boat Crabber 26 92,750.00 Anchor (11kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Anchor (11kg) plough type c/w electric windlass, warp and chain Anchor - kedge (7kg) plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boat name and port Clock & Barometer - 115mm chrome Cockpit cushions Eberspacher diesel heating - 2 outlets Fenders - 4 x 31' white with lanyards and Cornish Crabber logo Holding tank 55 ltr with electric waste pump and deck flush Mooring warps 2 x 50' multiplait 12mm Rope cutter - spur type Refrigeration system Sprayhood in acrylic cloth on stainless steel frame Teak cockpit seats and sole Non standard hull colour (per colour) Autopilot - Raymarine ST2000 Two tone decks Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Shore power with smart battery charger - inc shore cable Solar panel 19.6v 5w VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Feathering prop - feather stream (in lieu of standard) UV strips to sails - per sail Delivery / commissioning 366.00 1,695.00 235.00 825.00 1,695.00 75.00 375.00 385.00 2,910.00 165.00 1,250.00 98.00 565.00 928.00 1,350.00 2,470.00 630.00 852.00 345.00 148.00 76.00 930.00 1,595.00 195.00 630.00 1,095.00 1,285.00 95.00 POA Total Page 14 Prices are in Pounds sterling and include VAT @ 20% Page 15 Classic Pilot Cutter 30 RCD Category A Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green with the hull top plank in a contrasting colour as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. Laminated plywood rudder on stainless steel stock and tiller hood. Wooden tiller. Engineering Yanmar 3YM30 inboard diesel engine with 90ltr fixed fuel tank and associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and twin house batteries with isolation switch, electric switch panel and fuel gauge. Interior Choice of varnish or wood washed & painted interior finish and teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with oven, double burner and grill, pressurised hot and cold water and stainless steel sink. Fridge. Heads complete with marine toilet. Chart table. On Deck Stainless steel mooring cleats and Samson post with pivoting bow sprit. Strong stainless steel tabernacle. Three round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Rig The main mast and spars are from Sitka Spruce, treated with Sikkens as standard. The standing rigging is in 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in dark tan or cream and include mainsail, jib & staysail with both headsails on rolling wire luffs. Topsail. Navigation lights. Mainsail cover. Classic Pilot Cutter 30 standard boat 128,950.00 Anchor (11kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Anchor (11kg) plough type c/w electric windlass, warp and chain Anchor - kedge (7kg) plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boat name and port Electric bow thruster Clock & Barometer - 115mm chrome Cockpit cushions Eberspacher diesel heating - 2 outlets Fenders - 4 x white with Cornish Crabber logo Holding tank 55 ltr with electric waste pump and deck flush Mooring warps 2 x 60' multiplait 14mm Rope cutter - spur type Non standard hull colour (per colour) Two tone decks Autopilot - Raymarine SPX-5GP Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Shore power with smart battery charger - inc shore cable Solar panel 36w VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Feathering prop - feather stream (in lieu of standard) Delivery / commissioning 366.00 1,695.00 235.00 975.00 1,950.00 75.00 4,750.00 375.00 297.00 2,910.00 165.00 1,250.00 115.00 565.00 630.00 385.00 2,685.00 165.00 76.00 930.00 1,595.00 825.00 630.00 1,095.00 1,285.00 POA Total Page 16 Prices are in Pounds sterling and include VAT @ 20% Page 17 Adventure Adventure 17 RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours any combination Off White, Dark Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with plexus and GRP bonding and external solid teak rubbing bands. The hull is complete with moulded mini bilge keels and galvanised steel lifting centre plate. Laminated plywood rudder with lifting stainless steel plate, hangings and tiller hood. Varnished wooden tiller. On Deck / Cockpit Cast aluminium fairleads and mooring cleats. A retractable aluminium bow sprit with stainless steel mounting and tack fitting. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Slatted teak side deck seating and folding internal teak seating. Fully self-draining aft cockpit with folding spray hood to protect forward cockpit area. Forward cockpit cover. Outboard well to take up to 5hp petrol outboard. Locker lids and latches. Tiller extension. Rig The main mast and spars are from aluminium. The standing rigging is 1 x 19 stainless wire. Sails are available in white or cream and include mainsail & jib. Roller reefing spar with all controls back to the cockpit. All associated ropes and blocks. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. When a boat is built to order we will do our best to provide the owner with bespoke options where reasonable. Adventure Adventure 17 standard boat 16,950.00 Anchor - plough type 4.5kg c/w 30m x 12mm warp and 2m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Boat hook - with additional whisker pole attachments on mast Boat name and port Boarding ladder - fixed swim type Camping tent Compass - Silva handheld c/w external mounting bracket Cushions for forward v-berth including supports Fenders x 3. 19" x 5.5" white with Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Overall winter cover in PVC Non standard colours (per colour) Two tone decks (parchment or grey) EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock and strap Outboard - Mariner 4 HP 4 stroke c/w remote tank Outboard - Mariner 6 HP 4 stroke c/w remote tank Delivery per mile (on road trailer) Commissioning / launching 185.00 545.00 945.00 72.00 75.00 95.00 395.00 165.00 725.00 89.00 68.00 165.00 395.00 630.00 325.00 2,675.00 995.00 1,295.00 2.00 POA Total Page 18 Prices are in Pounds sterling and include VAT @ 20% Page 19 Adventure Adventure Adventure 19 RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green. Hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. External solid teak rubbing bands. The hull is complete with moulded mini bilge keels and a galvanised steel lifting centre plate. Laminated plywood rudder with lifting stainless steel plate, stainless steel hangings and tiller hood. Wooden tiller. Engineering (Inboard diesel version only) Yanmar 1GM inboard diesel engine with 4 gal fixed fuel tank, associated engineering and stern gear. Fixed 2 blade propeller. Engine starting battery with isolation switch. Interior Choice of varnish or wood washed & painted interior finish with teak trim. Internal cushions with optional colours. Manual bilge pump, fire extinguisher, opening forward hatch, galley complete with single burner gas cooker, plastic sink and portable pumped water container. Classic or 4 berth layouts. On Deck Cast aluminium fairleads and mooring cleats. Fixed aluminium bow sprit with stainless stem and tack fittings. Single round port light into cabin space. Sliding GRP hatch garage with varnished wood / perspex wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Rig The main mast and spars are aluminium. The standing rigging is in 1 x 19 stainless wire and all bespoke mast fittings are in stainless steel. Sails are available in white or cream and include mainsail & jib. Reefing headsail spar. All associated ropes and blocks. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. When a boat is built to order we will do our best to provide the owner with bespoke options where reasonable. Adventure 19 outboard (excluding engine) standard boat Adventure 19 inboard (including Yanmar 1GM 9 hp) standard boat Anchor - 7kg plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Berth extensions - removable plywood bases and matching cushions Boat hook - with additional whisker pole attachments on mast Boat name and port Boarding ladder - fixed swim type Camping tent Page 20 24,750.00 33,400.00 235.00 645.00 1,045.00 295.00 72.00 75.00 645.00 458.00 Clock & Barometer 110mm chrome Cockpit cushions Compass - Silva handheld c/w external mounting bracket Fenders - 3 x 19" white with lanyards & Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Overall winter cover in PVC Rope cutter - knife type (inboard version only) Sprayhood on stainless steel frame Table for cockpit / cabin Teak cockpit seats & sole Toilet - portapotti Toilet - sea toilet Non standard colours (per colour) Two tone decks (parchment or grey) Autopilot - Raymarine ST1000 Battery c/w isolation switch (outboard version only) Bilge pump - auto electric in addition to standard manual pump 12 Volt socket - cigar type Echosounder - Raymarine ST40 Echosounder / Log - Raymarine ST40 Electric cabin light Fuse panel (required when electrics are added) Navigation lights (masthead) Solar panel 19.6v 5w VHF radio - Raymarine 49E VHF aerial with wind indicator Wind instrument - Raymarine ST40 EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock & straps Outboard - Mariner 4 HP 4 stroke c/w remote tank Outboard - Mariner 6 HP 4 stroke c/w remote tank Feathering prop - feather stream (in lieu of standard) UV protection jib Beaching keels Whisker pole for racing Delivery per mile (on road trailer) Commissioning / launching 176.00 395.00 165.00 89.00 68.00 165.00 595.00 176.00 1,175.00 395.00 2,440.00 166.00 565.00 630.00 325.0 675.00 235.00 245.00 76.00 489.00 648.00 145.00 124.00 395.00 195.00 395.00 245.00 675.00 3,175.00 995.00 1,295.00 1,285.00 95.00 950.00 135.00 2.00 POA Total Prices are in Pounds sterling and include VAT @ 20% Page 21 Adventure Adventure 26 RCD Category B Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark blue and Dark Green with the hull top plank in two tone as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. GRP rudder with stainless steel hangings and tiller hood. Wooden tiller. Engineering Yanmar 3YM20 inboard diesel engine with 60ltr diesel tank and associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Hot & cold pressurised water in galley & heads. Interior Painted interior finish and teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with oven, double burner and grill, pressurised hot & cold water and stainless steel sink. Heads complete with marine toilet. On Deck Stainless steel mooring cleats and Sampson post with pivoting bow sprit. Three round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Two tone deck option as standard. Rig The main mast and spars are aluminium. The standing rigging is in 1 x 19 stainless wire. Sails are available in white or cream and include mainsail & jib on reefing spar. Navigation lights. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Adventure Adventure 26 standard boat 92,750.00 Anchor (11kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Anchor (11kg) plough type c/w electric windlass, warp and chain Anchor - kedge (7kg) plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boat name and port Clock & Barometer - 115mm chrome Cockpit cushions Eberspacher diesel heating - 2 outlets Fenders - 4 x 31' white with lanyards and Cornish Crabber logo Holding tank 55 ltr with electric waste pump and deck flush Mooring warps 2 x 50' multiplait 12mm Rope cutter - spur type Refrigeration system Sprayhood in acrylic cloth on stainless steel frame Teak cockpit seats and sole Non standard hull colour (per colour) Autopilot - Raymarine ST2000 Two tone decks Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Shore power with smart battery charger - inc shore cable Solar panel 19.6v 5w VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Feathering prop - feather stream (in lieu of standard) UV strips to sails - per sail Delivery / commissioning 366.00 1,695.00 235.00 825.00 1,695.00 75.00 375.00 385.00 2,910.00 165.00 1,250.00 98.00 565.00 928.00 1,350.00 2,470.00 630.00 852.00 345.00 148.00 76.00 930.00 1,595.00 195.00 630.00 1,095.00 1,285.00 95.00 POA Total Page 22 Prices are in Pounds sterling and include VAT @ 20% Page 23 Clam Clam 17 RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours any combination - Off White, Dark Blue and Dark Green. The hull and deck are joined by way of a 'biscuit tin' joint with plexus and GRP bonding and external solid teak rubbing bands. The hull is complete with moulded mini bilge keels. Laminated plywood rudder with lifting stainless steel hangings and tiller hood. Varnished wooden tiller. On Deck / Cockpit Cast aluminium fairleads and mooring cleats. Top quality deck gear with adjustable sail trimming cars and tracks and associated jammers. Folding internal teak seating. Fully self-draining aft cockpit with folding spray hood to protect forward cockpit area. Forward cockpit cover. Outboard well to take up to 5hp petrol outboard. Locker lids and latches. Tiller extension. Engineering (Inboard diesel version only) Yanmar 1GM inboard diesel engine with 4 gal fixed fuel tank, associated engineering and stern gear. Fixed 3 blade propeller. Engine starting battery with isolation switch. Clam Clam 17 outboard (excluding engine) standard boat Clam 17 inboard (including Yanmar 1GM 9 hp) standard boat Anchor - plough type 4.5kg c/w 30m x 12mm warp and 2m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Boat hook - with additional whisker pole attachments on mast Boat name and port Boarding ladder - fixed swim type Cushions for forward v-berth including supports Fenders x 3. 19" x 5.5" white with Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Overall winter cover in PVC Non standard colours (per colour) Two tone decks (parchment or grey) EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock and strap Outboard - Mariner 6 HP 4 stroke c/w remote tank Delivery per mile (on road trailer) Commissioning / launching 14,950.00 23,600.00 185.00 545.00 945.00 56.00 75.00 495.00 725.00 89.00 68.00 165.00 395.00 630.00 325.00 2,675.00 1,295.00 2.00 POA Total Page 24 Prices are in Pounds sterling and include VAT @ 20% Page 25 Clam Clam Clam 19 & Clam 19 Wheelhouse RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green. Hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. External solid teak rubbing bands. The hull is complete with moulded mini bilge keels and a galvanised steel lifting centre plate. Laminated plywood rudder with lifting stainless steel plate, stainless steel hangings and tiller hood. Wooden tiller. Engineering (Inboard diesel version only) Yanmar 1GM inboard diesel engine with 4 gal fixed fuel tank, associated engineering and stern gear. Fixed 3 blade propeller. Engine starting battery with isolation switch. Wheelhouse version has Yanmar 2YM14 engine as standard. Interior Choice of varnish or wood washed & painted interior finish with teak trim. Internal cushions with optional colours. Manual & electric bilge pumps, fire extinguisher, opening forward hatch, galley complete with single burner gas cooker, plastic sink and portable pumped water container. Classic or 4 berth layouts. On Deck Cast aluminium fairleads and mooring cleats. Single round port light into cabin space. Sliding GRP hatch garage with varnished wood / perspex wash boards. Wheelhouse version includes full glazing package and windscreen wiper to the helm position. Clam 19 outboard (excluding engine) standard boat Clam 19 inboard (including Yanmar 1GM 9 hp) standard boat Clam 19 Wheelhouse (including Yanmar 2YM 14 hp) standard boat 21,300.00 29,950.00 31,950.00 Anchor - 7kg plough type c/w 30m x 12mm warp and 4m x 8mm chain Antifouling - primer and two top coats Antifouling Coppercoat Boat name and port Boarding ladder - fixed swim type Clock & Barometer 110mm chrome Fenders - 3 x 19" white with lanyards & Cornish Crabber logo Mooring warps 2 x 40' 10mm multiplait Mooring strop for swinging mooring Rope cutter - knife type (inboard version only) 235.00 645.00 1,045.00 75.00 645.00 176.00 89.00 68.00 165.00 176.00 Page 26 Toilet - portapotti Toilet - sea toilet Non standard colours (per colour) Two tone decks (parchment or grey) Bilge pump - auto electric in addition to standard manual pump 12 volt socket - cigar type Echosounder - Raymarine ST40 Echosounder / Log - Raymarine ST40 Electric cabin light Solar panel 19.6v 5w VHF radio - Raymarine 49E including antenna EU Type Approved braked road trailer - c/w lighting board, flushing hubs, hitch lock & straps Beaching keels Flush deck only Fuse panel (required when electrics are added) Cockpit cushions Compass - Silva handheld c/w external mounting bracket Overall winter cover in PVC Sprayhood on stainless steel frame Table for cockpit / cabin Teak cockpit seats & sole Autopilot - Raymarine ST1000 Battery c/w isolation switch (outboard version only) Outboard - Mariner 4 HP 4 stroke c/w remote tank Outboard - Mariner 6 HP 4 stroke c/w remote tank Wheelhouse only Silva steering compass in wheelhouse Bow pulpit and cockpit rails Additional wiper for port side Dual helm position - removeable tiller & additional throttle in cockpit Second battery, switch panel & smart charge relay Wheelhouse & cabin lights Raymarine SPX-5 sport drive pilot Overall winter cover in PVC Delivery per mile (on road trailer) Commissioning / launching 166.00 565.00 630.00 325.00 245.00 76.00 489.00 648.00 145.00 195.00 395.00 3,175.00 950.00 124.00 395.00 165.00 595.00 1,175.00 395.00 2,440.00 675.00 235.00 995.00 1,295.00 77.00 1,175.00 110.00 495.00 285.00 260.00 1,598.00 655.00 2.00 POA Total Prices are in Pounds sterling and include VAT @ 20% Page 27 Clam Clam 22 RCD Category C Construction Hand laid GRP hull, deck and interior mouldings. Decks are Off White. Standard hull colours are any combination - Off White, Dark Blue and Dark Green with the hull top plank in contrasting colour as a standard option. The hull and deck joint is by way of a 'biscuit tin' joint with plexus / GRP bonding. Twin external solid teak rubbing bands. Laminated plywood rudder with stainless steel hangings and tiller hood. Wooden tiller. Engineering Yanmar 2YM15 inboard diesel engine with 40ltr fixed fuel tank, associated engineering and stern gear. Fixed 3 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Interior Choice of varnish or wood washed & painted interior finish with teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with double burner and grill, electric water pump and stainless steel sink with navigation table cover. On Deck Stainless steel mooring cleats and Samson post.Two round ports into cabin space. Sliding GRP hatch garage with varnished wooden wash boards. The standard specification offers a boat that if launched, could be motored away. Optional extras are available over and above the standard price as per the price list. When a boat is built to order we will do our best to provide the owner with bespoke options where reasonable. Clam Clam 22 standard boat 53,000.00 Anchor (20lb) plough type c/w 30m x 12mm warp and 8m x 8mm chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boarding ladder - fixed swim type Boat hook - with additional whisker pole attachments on mast Boat name and port Clock & Barometer - 115mm chrome Cockpit cushions Compass - Ritchie bulkhead mounted Eberspacher diesel heating - 2 outlets Fenders - 3 x 21" white with lanyards & Cornish Crabber logo Mooring warps 2 x 40' multiplait 12mm Overall winter cover in white PVC Rope cutter - spur type Teak cockpit seats and sole Toilet - portapotti inc fixings Toilet - sea toilet Holding tank 55 ltr with electric waste pump and deck flush Non standard colours (per colour) Two tone decks (parchment or grey) Autopilot - Raymarine ST2000 Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine ST60 Navigation lights Shore power with smart battery charger - inc shore cable Solar panel 19.6v 5w VHF radio - Raymarine 49E aerial with wind indicator EU Type Approved braked road trailer - twin axle c/w lighting board, flushing hubs, hitch lock & straps Delivery / commissioning 215.00 645.00 1,370.00 595.00 62.00 70.00 315.00 324.00 322.00 2,902.00 98.00 91.00 527.00 535.00 2,325.00 146.00 543.00 995.00 630.00 252.00 838.00 157.00 76.00 951.00 389.00 1,580.00 185.00 630.00 5625.00 POA Total Page 28 Prices are in Pounds sterling and include VAT @ 20% Page 29 Mystery Mystery 30 RCD Category B Construction Hand laid GRP hull, deck and interior mouldings. Standard colours are Mystery blue hull & white deck with contrasting non slip. The hull and deck joint is by way of a 'turn over hull flange' joint with plexus / GRP bonding. The hull is complete with a low cg iron keel securely through-bolted about substantial internal stiffeners. GRP rudder with stainless steel stock and tiller hood.Wooden tiller. Engineering Yanmar 2YM15 inboard diesel engine with 40ltr fixed plastic diesel tank and associated engineering and stern gear. Folding 2 blade propeller. Dedicated engine starting battery and house battery with isolation switch, electric switch panel and fuel gauge. Interior Painted interior finish and mahogany trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with twin burner, oven & grill. Hot & cold pressurised water. Heads compartment with marine toilet. Forward v-berth. On Deck Lewmar windows and hatches with aft windows opening. Lewmar winches, blocks and jammers with additional spinlock clutches. Adjustable sail trimming cars and tracks and associated jammers. Sliding GRP hatch garage with perspex wash boards. Solid rod kicker by Selden. Rig The main mast and spars are by Selden. The standing rigging is in dyform stainless wire. Dacron cruising mainsail and furling jib with uv strip. Single line reefing and under deck furler by Selden. Mystery Mystery 30 standard boat 84,500.00 Antifouling - primer and two top coats Antifouling Coppercoat Anchor - 12kg plough, c/w 30M 12mm warp and 8m 8mm chain Spinnaker pack - c/w sheets, winches, carbon pole, tweekers & sail Asymmetric gennaker on Selden bow sprit inc associated controls Sprayhood Fenders - 4 x 31" white with lanyards & Cornish Crabber logo Mooring warps 2 x 50' multiplait 12mm Compass - Ritchie bulkhead mounted Echosounder / log - Raymarine i50 VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Clock & Barometer - 115mm chrome Delivery / commissioning 825.00 1,695.00 366.00 3,342.90 2,750.00 1,355.20 165.00 98.00 322.00 930.00 630.00 1,095.00 375.00 POA Total Page 30 Prices are in Pounds sterling and include VAT @ 20% Page 31 Mystery Mystery 35 RCD Category A Construction Hand laid GRP hull, deck and interior mouldings. Standard colours are Mystery blue hull and white decks with parchment non slip. The hull and deck joint is by way of a horizontal turn over hull flange with plexus / GRP bonding. Complete with low cg lead keel securely through bolted about substantial internal stiffeners. GRP rudder on stainless steel stock & wooden tiller. Engineering Yanmar 3YM20 inboard diesel engine with 103ltr fixed tank and associated engineering and stern gear. Folding 2 blade propeller. Dedicated engine starting battery and twin house batteries with isolation switch, electric switch panel and fuel gauge. Interior Choice of varnish or painted interior finish and teak trim. Internal cushions with optional colours. Manual and electric automatic bilge pump, fire extinguisher, opening forward hatch, galley complete with cooker double burner with grill, pressurised hot & cold water system. Heads complete with marine toilet. Chart table. 5 berths. On Deck Lewmar windows, hatches and winches. Barton blocks and jammers with additional Spinlock clutches. Adjustable sail trimming cars, tracks and associated jammers. Sliding GRP companionway hatch with perspex washboards. Solid rod kicker by Selden. Furlex under deck roller headsail reefing. Rig The main mast and spars are by Selden with 1 x 19 Dyform standing rigging. All associated standing rigging to include spinnaker halyard. The sails are in Dacron to include a mainsail with three reefs and general purpose headsail including uv strip. Mainsail cover. The standard specification offers a boat that if launched, could be sailed away. Mystery Mystery 35 standard boat 164,250.00 Anchor (16kg) plough type c/w 30m x 12mm warp and 8m x 8mm chain Anchor (16kg) plough type c/w electric windlass, warp and chain Antifouling - primer and two top coats (International Interspeed Ultra or similar) Antifouling Coppercoat Boat name and port Clock & Barometer - 115mm chrome Eberspacher diesel heating - 3 outlets Fenders - 4 x white with Cornish Crabber logo Holding tank 55 ltr with electric waste pump and deck flush Mooring warps 2 x 60' multiplait 14mm Rope cutter - spur type Sprayhood in acrylic cloth on stainless steel frame Asymmetric gennaker on Selden bow sprit inc associated controls Spinnaker inc pole and associated controls Spinnaker / gennaker winches Autopilot - Raymarine SPX-5GP Chart light 12 volt socket - cigar type mounted near switch panel Echosounder / log - Raymarine i50 Shore power with smart battery charger - inc shore cable Solar panel 36w VHF radio - Raymarine 49E aerial with wind indicator Wind instrument - Raymarine i60 Delivery / commissioning 395.00 1,825.00 1,325.00 2,350.00 75.00 375.00 3,350.00 165.00 1,225.00 115.00 895.00 1,625.00 2,995.00 2,595.00 1,485.00 2,685.00 165.00 76.00 930.00 1,595.00 825.00 630.00 1,095.00 POA Total Page 32 Prices are in Pounds sterling and include VAT @ 20% Page 33 Notes The standard specification offers a boat that if launched, could be sailed away. Optional extras are available over and above the standard price as per the price list. When a boat is built to order we will do our best to provide the owner with bespoke options where reasonable. Page 34 Notes Page 35 For new and pre-owned boats contact: Cornish Crabbers LLP Head Office & Factory: Rock, Wadebridge, Cornwall PL27 6NT Tel: 44 (0) 1208 862666 Fax: 44 (0) 1208 862375 Email: [email protected] Solent Sales Office: Side Office 1, Hamble Point Marina, School Lane, Hamble, Southampton, Hampshire SO31 4NB Tel: 02380 457752 Mobile: 07903 858154 www.cornishcrabbers.co.uk Specification & Prices E&OE September 2014 replace anything previously printed Page 36 proud to be built in Britain