Every window wants to be opened by the VCD. - dh

The real ventilation professional.
Controlled by most modern motor electronics.
» Refined, elegant solution for
automated opening of bottom-hung,
top-hung and side-hung vents
» Universal bracket sets with
colour-coordinated covers
» Symmetrical design with a smart,
elegant look
WWW.DH-PARTNER.COM
VCD Series
VCD Series
VCD Series
VCD Series
VCD Series
VCD Series
Every window wants to be
opened by the VCD.
VCD Series
The state-of-the-art motor for a breath of fresh air.
Featuring proven D+H technology, it is a technically and
functionally refined system for natural ventilation. These
modern drive are suitable for all façade and roof windows
and, thanks to optimised brackets, is both quick to install
and universally applicable. In their sleek and solid, die-cast
zinc design, the VCD 203 and VCD 204 now pack exceptional functionality and performance into the smallest
dimensions. This series has what it takes: Placed in the centre,
the high-performance chains can handle up to 200 N of
force of pressure and tractive force.
The stroke can be individually programmed up to 350 mm
with a magnet. Easy to install via pluggable connection,
the VCD 203 and VCD 204 reliably bring a breath of fresh
air into any room.
Microprocessor-controlled motor electronics using D+H
PLP technology permanently monitors and controls the
drive, ensuring especially quiet operation. The entire series
offers the greatest degree of safety thanks to both active
and passive closing edge protection and the integrated,
newest generation of the tandem safety function TMS+,
which shuts down each drive in tandem operation if one is
interrupted due to a power outage or overload.
Both drives are extremely adaptable and run especially
quiet, so you‘ll hardly even notice they are there. And
a word about power consumption: Their low current
consumption of just 0.35 A for 24 V drives makes it
possible to significantly diminish the controls and power
supply units.
You‘ll see: Every window wants to be opened by the VCD.
Especially quiet operation
Fig: VCD 204/350
Scale of approximately 1:1
(W x H x D: 480 x 30 x 47 mm)
Symmetrical design
in an attractive, modern look
Pluggable cable connection
with 2.5 m PVC cable
Available as
24 V and 230 V versions
Integrated magnet sensor for
individually stroke programming
Tandem safety function (TMS+):
· shuts down all drives in tandem operation
if one stops due to a power outage or overload
· increases functionality by incorporating external
functional modules
Technical Data
Fig.: VCD 203
Drive Type
Nominal voltage
Stroke
Nominal current
Power
Nominal force of pressure
Nominal tractive force
Locking pressure
Protection class
Temp. range
Connection
Housing
Dimensions
VCD 203
VCD 204
VCD 204-K
24 V ± 20 %
250 mm
0.35 A
200 N
150 N (safety cut-off force)
2,000 N
IP 30
0 °C ... + 60 °C
2.5 m PVC cable (pluggable)
Powder-coated die-cast zinc
300 x 30 x 47 mm
24 V ± 20 %
250 mm / 350 mm
0.35 A
200 N
150 N (safety cut-off force)
2,000 N
IP 30
0 °C ... + 60 °C
2.5 m PVC cable (pluggable)
Powder-coated die-cast zinc
480 x 30 x 47 mm
230 V AC - 15 / + 10 %
250 mm / 350 mm
10 W / 15 VA
200 N
150 N (safety cut-off force)
2,000 N
IP 30
0 °C ... + 60 °C
2.5 m PVC cable (pluggable)
Powder-coated die-cast zinc
480 x 30 x 47 mm
Rights to technical modifications reserved.
Solid, powder-coated housing
die-cast zinc
Centre-placed chain
with life long lubrication
Universally
applicable
end fitting
Especially low current consumption
Microprocessor-controlled
motor electronics PLP
with the 24 V version
For more information about
the VCD Series please visit:
www.dh-partner.com
Universal bracket sets
with colour-coordinated covers
Optional electronic functions:
· OPEN and CLOSE indication (SA-SZ)
· or SGI position indicator signal
· or SKS connection for closing edge protection
VCD 203 and VCD 204:
Easy to install.
Vent mounting, opening inwards
Drive mounted on vent
Frame mounting, opening outwards
Drive mounted on frame
Frame mounting, opening inwards
Drive mounted on frame
The VCD Series is eye-catching for more than just one reason. In addition
to looking great, this ventilation drive is a marvel to operate thanks
to its universal bracket sets with the maximum in application options.
Whether mounted on vent or frame – the chain drives leave nothing
to be desired in terms of flexibility of application. With colour-coordinated bracket covers and many other features, this refined, elegant
drive series for the automated opening of bottom-hung, top-hung and
side-hung vents makes a smart, attractive system for ventilating your
rooms naturally.
Interested in the VCD Series? Then please complete the detachable feedback form and send your inquiry to the fax number of
your D+H Service and Sales Partner indicated on the reverse side. We are also happy to arrange a phone consultation with you.
We look forward to your inquiry.
VCD Series
Please fill out completely
Feedback
Company
Yes, please contact me (by phone or e-mail) with more information on the VCD Series.
VCD 203
Last name / First name
Street address
Please detatch here
Post code
Phone
City
E-Mail
Yes, please send me up-to-date information
on your e-newsletter.
Your data will be handled confidentially in accordance with applicable German privacy regulations and will not be passed on to third parties.
VCD 204
VCD Series
VCD Series
VCD Series
VCD Series
VCD Series
WWW.DH-PARTNER.COM
WWW.DH-PARTNER.COM
Your D+H Service and Sales Partner:
©
D+H Mechatronic AG
Georg-Sasse-Straße 28-32
22949 Ammersbek
Germany
Phone: +49 40 60565 0
Telefax: +49 40 60565 222
E-Mail: [email protected]
2014 D+H Mechatronic AG, Ammersbek 99.701.77; 2.0/03/14