Happy D.2 # H2 7696
Transcription
Happy D.2 # H2 7696
Leben im Bad Living bathrooms Happy D.2 # H2 7696 38 74 B 74 38 100 110 Installation instructions 2000 A 50 50 50 A mm B mm 1200 976 2x 100 4x S8 4x 5,5x50 Instructions for use The bathroom furniture range complies with the standards and guidelines applicable at the time of delivery and is designed for use in bathrooms. Direct contact with water should be avoided, for example, when showering. A power supply of 110 V – 230 V must be available on site. Distance from the sensor to the reflecting surfaces = > 75 mm. We reserve the right to make technical improvements and design modifications to the products illustrated. MAL_Happy D.2_H27696/14.03.1 1 2 3 4 230 V Ø 8 mm 4x 5 6 7 8 10 11 12 2 1 9 1 2 16x 4x 14 15 16 1 2 3 4 Best.-Nr. H27696/14.03.1 13 Duravit AG, Werderstr. 36, 78132 Hornberg, Germany, Phone +49 78 33 700, Fax +49 78 33 70 289, [email protected], www.duravit.de MAL_Happy D.2_H27696/14.03.1 Leben im Bad Living bathrooms Mirror cabinet with Soundsystem/LED-Dimming function Brief instructions Index Caution to Users ...........................3 Statement ..................................... 3 Technical information Duravit Soundsystem..................... 4 Bluetooth & Enddevices................. 4 Soundquality.................................. 4 Operating Instructions Consoults and help ....................... 5 Building up a connection to the soundsystem....................... 6 LED-Dimming function.................. 7 We reserve the right to make technical improvements and enhance the appearance of the products shown. 2 BAL_56878/08.13.1 Customers Product: Contains FCC ID: 2AA7R465BT01 Contains IC: 11431A-465BT01 Caution to Users changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Statement (USA) This evice complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (Canada) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d´Industrie Canada applicables aux appareils radio exempts de licence. L `exploitation est autorisèe aux deux conditions suivantes: (1) l´appareil ne doit pas produire de brouillage, et (2) l´utilisateur de l´appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d´en compromettre le fonctionnement. BAL_56878/08.13.1 3 DURAVIT SOUNDSYSTEM Technical specifications Powerconnection – 115 V – Powerconnector only neccesary in combination with the mirror lighting. – We always recommend doing this through a specialist keeping the norms of the respective country in mind. Power consumption – Standby < 0,5 Watt Output performance – 2 x 5 Watt (Flat Drive Speakers), – 1 x 25 Watt (Active bass with passive radiator principle) Data transmission – Bluetooth® 2.1 (older versions also compatible) Transmission profile – A2DP (Advanced Audio Distribution Profile) Range – Performance class 2 (up to 10 meters) Loss of usable space – 55 mm in the mirror cabinet Controll – Independent of the lighting Acoustictextile – High acoustic transparency – 100% Polyester – Lowest waterabsorption of textile fibres: 0,4-1,0% – cleaning with wet cloth – not flameable After Sales – Soundsystem replaceable as one unit. 4 BAL_56878/08.13.1 Storage – Max. 8 different devices can be saved. – If a ninth device is applied the device saved first will be deleted from the storage automatically. Pairing – Activation time of the capacitive switch: 3 – 5 seconds. – During an over- or underrun of this time no effect. Because of that, objects can be placed on top of the capacitive switch inside the mirror cabinet. – After removing the object the capacitive switch takes around 10 seconds to reconfigure itself. After that it can be used normally for Pairing-Mode. User exchange – Deactivate „Bluetooth ®“ on the device, that is used at the time. – Cut the connection from the device logged in at the time to the attached device „Duravit Soundsystem“. – If the logged in device is out of range for over 3 minutes, the connection will be deactivated automaticly. If the user gets back in range in the time given - his device will automaticly reconnect to the soundsystem. – Depending on witch device is used, the time until connecting another device after the log off of the first device can be up to 60 sec.. Bluetooth & Enddevices Bluetooth® is a wireless communications technology with a short range, witch can be used to transfer data and information over a 10 meter distance wirelessly. The devices don’t have to be oriented for a Bluetooth® connection. If devices are in the same user area they can share information with each other even if they‘r in different rooms. The device supports the Bluetooth®-Standard 2.1 with the Profil A2DP but is also compatible with downgrades. Please check if your device matches those requirements. Check the manual of your device to create a Bluetooth® connection. Some enddevices especialy those who have not been testet by, Bluetooth SIG could be incompatible with the soundsystem. The available functions and extra services can be different depending on hardware, software and network provider. Applications and functions can be different depending on country, area or hardware specification. Duravit is not responsible for performance issues caused by applications from third parties. soundquality The best soundquality can be reached if: – Musictitels are used in an accurate format like MP3, WAV oder Apple-Format.. – Musictitels are used in the highest Bitrate. – The device is used inside the radio range. consoults and help Please try the following to solve Problems. -Probable Cause u Solution A new device can’t be connected to the soundsystem ? - The Bluetooth connection on your device is not activated. u Activate the Bluetooth® function . - More than 8 Devices have been logged into the system. Your device has been deleted automaticly from the storage because you logged in to many devices. u Execute the Pairing process between your device and the soundsystem again. Your device will be saved on the storage again. - Activating the capacitive switch took less than 3 or longer than 5 seconds. u Activate the capacitive switch for at least 3 seconds but not for longer than 5 seconds. If the activation process takes longer or shorter than the time given the pairing process can’t be started. - The capacitive switch got blocked witch an object inside the cabinet. u Remove the object from the capacitive switch. After 10 seconds the capacitive switch calibrated itself again. Go on with the pairing process like usually. After that the space inside the cabinet can be be used as always. - There is an active connection between the soundsystem and another device. u Cut the active connection between the soundsystem and the logged in device. Its not enough to get out of reach because the connection wont get lost for another 3 minutes after leaving the radio range. If the user comes back in that time his device gets connect again automatically to the soundsystem. Only if you stay out of range for 3 minutes or longer the connection will cut automatically and the soundsystem will be free to connect to another device. - The waiting time between the log off of the first and the log on of the second device was to short. u Try top connect again after 60 seconds. the user cant be changed - The pairing process wasn’t executed with the device yet. u Execute the pairing process with the device. - The Bluetooth connection on the device is not activated. u Activate the Bluetooth function on the device. - There is an active connection between the soundsystem and another device. u Cut the active connection between the soundsystem and the logged in device. Its not enough to get out of reach because the connection wont get lost for another 3 minutes after leaving the radio range. If the user comes back in that time his device gets connect again automatically to the soundsystem. Only if you stay out of range for 3 minutes or longer the connection will cut automatically and the soundsystem will be free to connect to another device. - The waiting time between the log off of the first and the log on of the second device was to short. u Try top connect again after 60 seconds. BAL_56878/08.13.1 5 BUILDING UP A CONNECTION TO THE SOUNDSYSTEM Bluetooth ON 1 2 As soon as the mirrorcabinet gets connected to electricity, the soundsystem will be activated. Activate the Bluetooth®-function on your device. 8:51 AM General Bluetooth Bluetooth ON Deviees Duravit Soundsystem 5 The Soundsystem will be shown as „Duravit Soundsystem“ in the Bluetooth® menue on your device. Now connect your device with the soundsystem. If you‘re asked to type in a PIN code, please enter 1817. 6 BAL_56878/08.13.1 6 Start the music on your device. To cut the connection: – Turn off „Bluetooth®“ on your device. – Cut the connection to the atteched device „Duravit Soundsystem“. – If you‘re out of range for longer than 3 minutes the connection will be cut automaticly. 3 3 sec Activate the capacitive switch on the inner right side of the mirror cabinet by touching the marked area for at least 3 seconds, but maximum 5 seconds. 4 A recognition sound can be heard. The Pairing-Mode stays active for ca. 1 minute. In this time you should build up a connection to the soundsystem. If it takes you longer than one minute you‘ll have to press the pairing button again. LED-Dimming function LED LED 1 1-2 sec 100% 2 >3 sec 100% 10% BAL_56878/08.13.1 7 Duravit NYC 105 Madison Avenue New York, NY 10016 Phone:+1 212 686 0033 Fax: +1 212 686 8033 [email protected] nyc.duravit.com Best.-Nr. 56878/08.13.1 We reserve the right to make technical improvements and enhance the appearance of the products shown. Duravit USA, Inc. 2205 Northmont Parkway Suite 200 - Duluth, GA 30096 Phone +1 770 931 3575 Fax +1 770 931 8454 [email protected] www.duravit.us