NIST - Maxtech

Transcription

NIST - Maxtech

Economical Digital Pressure Gauge
NIST
it
“Lo-Side” Digital Pressure Gauge
SPECIFICATIONS
Range
Accuracy
0-99.9 psi (.1 psi resolution)
0-29.9" Hg Vacuum (.1" Hg resolution)
± 2% + 1 digit of reading
“Hi-Side” Digital Pressure Gauge
SPECIFICATIONS
Range
0-500 psi (1 psi resolution)
Accuracy
± 2% + 1 digit of reading
Power Supply
9 VDC
Low Battery Indicator
1
Connection
⁄4" NPT lower mount
Maximum Overload
700 psi
Air service or non-corrosive gases
1 year warranty
Catalog No. Model
Description
Price
TI9675
TI9676
NISTPR5
NISTPR6
Lo-Pressure Indicator
Hi-Pressure Indicator
NIST Certificate
NIST Certificate with Data
$94.95
94.90
85.00
130.00
9675
9676
—
—
Digital Pressure Gauge
NIST
it
• Affordably priced
• Superior accuracy
• Broad range from -14 to 500 psi
• Large LCD display
• Self contained
• 9 volt battery and/or 120 VAC
• On/off switch
Pressure / Pressure Calibrators
H
SPECIFICATIONS
676
Davis Inotek Instruments
Scale
Operating
Temperature Range
Accuracy
Resolution
Display
Power
Pressure Port
-14 to 500 PSI
32°F to 120°F
Better than 1%
1 PSI
0.5" LCD
9 volt battery or 120 VAC with adapter
1
⁄8 " NPT male
Catalog No.
Model
Description
SC228100
DPG500
NISTPR5
NISTPR6
—
—
with storage case
NIST Traceable Certificate
with Data
Price
$134.00
85.00
130.00
Includes
• 1⁄8" NPT female to 1⁄4" Flare male brass fitting
• AC power adapter with 5 foot cord
• Calibration screwdriver, storage case
www.davis.com
NIST
it
SPECIFICATIONS
Accuracy
Temperature effect
Display
Power
Enclosure
Engineering Units
Over-Pressure limits
Field calibration
Media compatibility
Process connection
Operating Temp.
± 1% of Full Scale at calibrated temperature.
± 0.1% per °F
4.5 digit LCD (0.4" height), Low battery indicator
One 9 volt alkaline battery (included)
Custom molded ABS plastic housing
Available in either PSIG, Bar or kg/cm2
twice the full scale range
Zero and span adjustment potentiometers are
accessible by removing the back of the case
Isolated sensor for processes compatible with
17-4 PH stainless steel
1/4" male NPT
32°F to 122°F (0°C to 50°C)
Catalog No. Description
Range
MR38001
MR38002
MR38003
MR38004
MR38005
MR38006
MR38007
MR38008
0 to 50 PSIG
0 to 100 PSIG
0 to 500 PSIG
0 to 1000 PSIG
O to 1500 PSIG
0 to 3000 PSIG
0 to 6000 PSIG
0 to 10,000 PSIG
Price
$140.00
140.00
140.00
140.00
140.00
140.00
140.00
140.00
• Pressure ranges are available to 10,000 PSIG at an accuracy of ± 1%
of Full Scale
• One 9 volt alkaline or lithium battery powers the transducer and the
LCD display.
• The display is a 4.5 digit LCD with 0.4" high numerals
• “Push To Read” key turns the display on for approximately 40 seconds
• Automatic shut-off
NIST
it
DigiGauge 1000
• Industrial Grade: Ruggedly built for industrial use
• Pressure Ranges: 2 PSI, 20 PSI and 200 PSI
• Accuracy: ± 0.25% full scale
• Display: 3.5 digit LCD (0.5" character height)
• Power: One 9 volt alkaline battery (included)
• Engineering Units: PSI (standard). Other units available (specify)
• Pressure Connection: 1/4" Male NPT
• Over Pressure Limits: Twice the full scale range
• Weight: 14 oz.
H
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Accuracy
Operating Temperature
Media Compatibility
Power
Dimensions
Pressure Connection
Weight
± 0.25% full scale, ± 1 digit
0°C to 50°C (32°F to 122°F)
Non-corrosive fluids and gas
One 9 volt alkaline battery
3.25" diameter
1/4" Male NPT
14 oz.
Catalog No.
Model
NH747002
NH747020
NH747200
Accessories
NH747110
NISTPR5
NISTPR6
110-2PSIG
Digital Pressure Gauge, 2 PSI
$325.00
110-20PSIG Digital Pressure Gauge, 20 PSI
325.00
110-200PSIG Digital Pressure Gauge, 200 PSI 325.00
Description
Price
110-Case
—
—
NISTPRQ5
NISTPRQ6
—
—
Molded carrying case
with Data
2 Year NIST Traceable Certificate
with Data
45.00
85.00
130.00
127.00
195.00
www.davis.com
Ask about
677
Mini Digital Pressure Meter
NIST
it
SPECIFICATIONS
Combined Linearity, Hysteresis and Repeatability
Over Pressure
Pressure Port
Battery
Low Battery
Dimensions/Weight
± 0.25% full scale ± 1 digit
3 X the pressure range
0 to 50°C
0.2" O.D.
Type 9 Volt Alkaline; Life: 100 Hours
Indication at or below 6.8V
3" x 2" x 1.4" / 6.5 oz.
Catalog No.
Description
NH620103
NH620104
NH620100
NH620102
NH620106
Accessories
NH620105
NH031108
NH031107
NISTPR5
NISTPR6
Pressure/Vacuum Range 199.9/19.9 PSI
Pressure/Vacuum Range 1999/19.99 PSI
Pressure/Vacuum Range 199.9/199.9 In H2O
Pressure/Vacuum Range 1999/199.9 In H2O
Pressure/Vacuum Range 19.99 PSI/199.9 cm H2O
Tubing Fitting Kit
Syringe pump for precise generation of pressure and vacuum
Soft carrying case
NIST Traceable Certificate with Data
Custom models available, Please inquire
Price
$219.00
219.00
219.00
219.00
219.00
20.00
3500
20.00
85.00
130.00
•
•
•
•
•
•
Accuracy ± 0.25% Full Scale
Measures Positive and Vacuum Pressure
Easy to read LCD Display 0.5" 3 1/2 Digit
Only 3" x 2" x 1.4" and weighs only 6.5 oz.
Dual Units, mmHg/PSI or mmHg/In H2O
Media: Non corrosive fluids and gases
Weather Resistant Digital Pressure Gauge
NIST
it
• Weather Resistant
• Self-Powered by Standard 9 Volt Battery
• Large, Full 4 Digit Display with .5 inch Characters
• Keypad Operated Microprocessor Circuit has Tare (Auto Zero), Peak
Hold and an Alarm as Standard Functions
• Direct Reading to 9999 PSI
• A 16 Minute Auto-Off Circuit (4 Minute with Optional Backlight)
• 0-5 VDC and 4/20 mA Outputs Available
• ± 0.25% of Full-Scale Accuracy
H
678
SPECIFICATIONS
Standard Pressure Ranges
Overpressure
Burst Pressure
Pressure Cavity Volume
Accuracy (linearity,
hysteresis, and repeatability)
Temperature Range
Thermal Zero Shift
Thermal Sensitivity Shift
Resolution (Transducer)
(Display)
Life
Batteries/Life
Display
Auto-Off
Operating Temp. Range
Compensated Temp. Range
Wetted Materials
Vacuum to 10,000 psi
2x full scale without damage
10x full scale or 20,000 psig whichever is less
0.07 in3 typical
± 0.25% of full scale
30°F to 130°F
± 0.02% F.S./°F
± 0.02% F.S./°F
Infinite
1 part in 10,000
10 million cycles minimum
Standard 9 volt, 700-900 hours continuous on
4 digit LCD, .5" Digits
16 minutes standard, 4 minutes with backlight
0°F to + 160°F
30°F to + 130°F
15-5 Stainless Steel. 316 S.S. available
Catalog No.
Description
TX5881018
TX50021
TX5881019
TX50022
TX5881021
TX50023
TX5881022
TX50024
TX5881023
TX50025
TX5881024
TX50026
Accessories
TX588104
TX5004
TX5005
TX5881001
TX5009
NISTPR5
NISTPR6
Digital Pressure Gauge, 0-20 psig
Digital Pressure Gauge, 0-20 psia
Digital Pressure Gauge, 0-1,000 psig
Digital Pressure Gauge, 0-1,000 psia
Auto-Off (Non-standard)
Rear Pressure Connection
Panel Mounting Flange
Peak Hold
Optional Backlight
Price
$400.00
450.00
300.00
350.00
300.00
350.00
300.00
350.00
300.00
350.00
300.00
350.00
30.00
10.00
30.00
30.00
45.00
85.00
130.00
www.davis.com
Heavy Duty Digital Pressure Gauges
Battery-Powered Gauges
• Top-accessible zero/span potentiometers
• Rugged extruded aluminum case
• Five-minute automatic shut off conserves battery life
• 1000 hours typical battery life for ± 0.25% full-scale accuracy gauges
• 500 hours typical battery life for ± 0.5% full-scale accuracy gauges
• Low battery indication
Loop-Powered Gauges
• Power by 8 to 32 DC, 4 to 20 mA loop max
• Reverse polarity protected
• Low loop power warning is displayed when power falls below 7.8 VDC
• Use TEST button to check loop operation
• Three-foot, two-wire electrical connection
AC/DC-Powered Gauges
• Powered by 8 to 24 VAC, 50/60 Hz or 9 to 32 VDC, 5 mA max
• Three-foot, two-wire electrical connection
AC/DC-Powered Gauges with Alarms
• Power by 8 to 24 VDC, 50/60 Hz or 9 to 32 VDC, 1 W max
• Visual LED alarm indicators on front panel
• Select high and low setpoints with top potentiometers
• Use TEST button to cycle alarms
• Two SPDT relay contacts are rated for 1 A at 24 VD and 0.5 A at 115
VAC, noninductive
• Three-foot, eight-wire electrical and alarm connection
NIST
Model DPG1000B
Battery-Powered Gauge
Model DPG1000L
Loop-Powered Gauge
Model DPG1000AD
AC/DC Powered Gauge
Model DPG1000ADA
AC/DC Powered Gauge with Alarm
SPECIFICATIONS
Accuracy
Process connection
Operating temperature
Ask about
2 Year
NIST %
Save 50
on 2nd year
recalibration
Display
Media compatibility
Dimensions
Weight
± 0.25% full scale plus 1 least significant digit
1/4" NPT(M)
± 0.25% full-scale accuracy gauges: -4 to 185°F
(-20 to 85°C)
3 1/2 digit, 1/2" H LCD
Gases or liquids compatible with 316 stainless steel
3 3/8" dia., 3 3/8" H x 1 5/8" D
1 lb
Catalog No.
Range
Resolution
Price
DPG1000AD — AC/DC Powered Gauges ± 0.25% full-scale accuracy
CE2700
0 to 30" Hg
0.1" Hg
$279.00
CE2704
0 to 15 psi
0.01 psi
259.00
CE2706
0 to 30 psi
0.1 psi
259.00
CE2710
0 to 100 psi
0.1 psi
259.00
CE2712
0 to 200 psi
0.1 psi
259.00
CE2716
0 to 500 psi
1 psi
259.00
CE2718
0 to 1000 psi
1 psi
259.00
CE2720
0 to 3000 psi
1 psi
279.00
CE2722
0 to 5000 psi
1 psi
279.00
DPG1000ADA — AC/DC Powered Gauges w/Alarms ± 0.25% full-scale accuracy
CE3300
0 to 30" hg
0.1" Hg
349.00
CE3304
0 to 15 psi
0.01 psi
349.00
CE3306
0 to 30 psi
0.1 psi
349.00
CE3310
0 to 100 psi
0.1 psi
349.00
CE3312
0 to 200 psi
0.1 psi
349.00
CE3316
0 to 500 psi
1 psi
349.00
CE3318
0 to 1000 psi
1 psi
349.00
CE3320
0 to 3000 psi
1 psi
369.00
CE3322
0 to 5000 psi
1 psi
349.00
CE6655
115 VAC to 12VDC Adapter for AC/DC gauges
25.00
NISTPR6
130.00
www.davis.com
H
Catalog No.
Range
Resolution
Price
DPG1000B — Battery Powered Gauges ± 0.25% full-scale accuracy
CE2500
0 to 30" Hg
0.1" Hg
$259.00
CE2501
-15 to 15 psi
0.01 psi
279.00
CE2505
0 to 15 psi
0.01 psi
259.00
CE2506
0 to 30 psi
0.1 psi
259.00
CE2510
0 to 100 psi
0.1 psi
259.00
CE2512
0 to 200 psi
0.1 psi
259.00
CE2516
0 to 500 psi
1 psi
259.00
CE2518
0 to 1000 psi
1 psi
259.00
CE2520
0 to 3000 psi
1 psi
279.00
CE2522
0 to 5000 psi
1 psi
279.00
DPG1000L — Loop Powered Gauges ± 0.25% full-scale accuracy
CE2600
0 to 30" Hg
0.1" Hg
289.00
CE2604
0 to 15 psi
0.01 psi
289.00
CE2606
0 to 30 psi
0.1 psi
289.00
CE2610
0 to 100 psi
0.1 psi
289.00
CE2612
0 to 200 psi
0.1 psi
289.00
CE2616
0 to 500 psi
1 psi
289.00
CE2618
0 to 1000 psi
1 psi
289.00
CE2620
0 to 3000 psi
1 psi
309.00
CE2622
0 to 5000 psi
1 psi
309.00
NISTPR5
85.00
it
679
Digital Pressure Gauges
NIST
it
Model PG-2000
• Large 31⁄2 digit display with 0.5" digits
• Battery operated with convenient on/off switch
• Ranges -14.7 psi to 2,000 psi
• Analog output available (0-2V)
• 20 minute auto-off optional at no charge
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Model PG-5000
• Large 4 digit display with 0.5" digits
• Battery operated with convenient on/off switch
• Optional auto-off circuit with 16 min. standard
delay at no extra cost
• Ranges 0-20 psi to 0-9,999 psi (direct reading to
10,000 psi)
• Peak-hold and analog output (0-2V) available
• Available with .01 psi resolution (100 psi max.)
(optional)
Economical Replacement for Mechanical
Gauges
The latest in solid state design, the PG-2000 and PG5000 incorporate a semiconductor strain gauge pressure transducer as the sensing element, conditioned by
hybrid electronics. The unit requires very low power
consumption, resulting in a battery life of 2 years in
typical use.
Applications
SPECIFICATIONS
H
680
Model
Pressure Range
PG-2000
PG-5000
0-20, 0-200, 0-2000 psi
0-20, to 10,000 psi
(any range between points may be specified)
± .25% F.S.
± .25% F.S.
31⁄2 Digit LCD
4 Digit LCD
N/A
Optional
Optional
Optional
Accuracy
Display
Peak Hold
Analog Output (0-2V)
Center Back
Mount Option
Optional
Optional
Gage Pressure
Standard
Standard
Auto Shut-Off
Optional
Optional
Resolution
.01 PSI (20 psi range)
.01 PSI (20 psi range)
Common Specification for both the PG-2000 and PG-5000
PERFORMANCE
Overpressure
2X full scale without damage
Burst Pressure
10X full scale or 20,000 PSIG whichever is less
0.065 inches 3
Accuracy (linearity, hysteresis
± .25% of full scale
and repeatability)
Compensated Temperature Range
30°F to 130°F
Thermal Zero Shift
± 0.02% F.S./°F
± 0.02% F.S./°F
Resolution
Transducer
Infinite
Infinite
Display
1 part in 1999
1 part in 9999
Life
10 million cycles minimum
PHYSICAL
Construction Materials
Case
Injection molded Valox
Wetted Materials 15-5 or 17-4 P.H. Stainless Steel. 316 S.S. available at no extra charge
Mount
All units shipped with Bottom Stem Mount. (Both models may be
ordered with back mount.) All mounts 1⁄4 NPT
No special tools or adapters are required for installation of the PG-2000 and PG-5000. This makes the units
an easy and cost effective replacement for less accurate,
standard mechanical dial gauges. The units' long life,
ease of operation, high accuracy, and low cost make it
perfect for all applications where standard 21⁄2 inch or
larger mechanical gauges have been used.
Catalog No. Model
Description
TX5881011
TX5881012
TX5881013
TX5881014
TX5881015
TX5881018
TX5881019
TX5881020
TX5881021
TX5881022
TX5881023
TX5881024
TX5881025
Options:
PG-2000-20
PG-2000-G
PG-2000-G
PG-2000-G
PG-2000-G
PG-5000-G2
PG-5000-G
PG-5000-G
PG-5000-G
PG-5000-G
PG-5000-G
PG-5000-G
PG-2000-1000-G
Price
TX5881001
TX5881002
TX588104
TX588105
NISTPR5
NISTPR6
—
—
—
—
—
—
Peak Hold
Analog output (0-2V)
Auto off, 20 min. standard
Rear pressure connection
20 PSIA
0-100 PSI
0-200 PSI
0-500 PSI
0-2,000 PSI
20 PSI
0-100 PSI
0-200 PSI
0-500 PSI
0-1,000 PSI
0-5,000 PSI
0-10,000 PSI
0-1000 PSI
$290.00
240.00
240.00
240.00
240.00
400.00
300.00
300.00
300.00
300.00
300.00
300.00
240.00
60.00
75.00
30.00
10.00
85.00
130.00
www.davis.com
Analog/Digital Pressure Gauge
NIST
it
SPECIFICATIONS
Overpressure
Compensated Temp. Range
Batteries
Wetted Materials
• Peak Hold
• Extra Large Full 4-Digit Display with .75 Characters and 270 Degree
Bar Graph “Analog” Readout
• Direct Reading to 10,000 PSI
• NEMA 4 Phenolic Housing
• Battery Powered with Automatic Light-Actuated Battery-Saver Circuit
• Microprocessor-Based Circuit
• ± 0.25% of Full Scale Accuracy
30°F to 130°F
1 or 2 Lithium, or 2 alkaline (“C” Size)
0°F to + 160°F
15-5 or 17-4 P.H. Stainless Steel
Catalog No.
Pressure Range
4-20mA Output
Price
TX588143
0-50 PSIG
NO
$375.00
TX588145
0-50 PSIG
YES
450.00
TX588149
0-100 PSIG
NO
375.00
TX588151
0-100 PSIG
YES
450.00
TX588155
0-500 PSIG
NO
375.00
TX588157
0-500 PSIG
YES
450.00
TX588161
0-1000 PSIG
NO
375.00
TX588163
0-1000 PSIG
YES
450.00
TX588173
0-5000 PSIG
NO
375.00
TX588175
0-5000 PSIG
YES
600.00
TX588179
0-10,000 PSIG
NO
375.00
TX588180
0-10, 000 PSIG
YES
420.00
NISTPR5
85.00
NISTPR6
130.00
Optional Dual Alarm and RS-232 Interface available. Please inquire
NIST
NEMA 4 Digital Pressure/Process Gauge
it
With Visual Alarm
SPECIFICATIONS
• Selection of Engineering
Units
• Field Recalibration
• Min/Max
• Damping
• Shutoff Timer
• 41⁄2 digit 0.6" high LCD
Display
± 0.25% of Full Scale
41⁄2 digit LCD (0.6" high)
Two 9 volt alkaline batteries (included)
NEMA 4, 316 stainless steel
1
⁄ 4" male NPT, 316 stainless steel
Twice the full scale range
-40° F to 158°F
32°F to 158°F
21 ounces
3.77" diameter x 2.25" depth
Catalog No.
Model
Pressure Range
MR39001
MR39002
MR39003
MR39004
MR39005
MR39006
MR39007
MR39008
NISTPR5
NISTPR6
3900-GI0010
3900-GI10050
3900-GI0100
3900-GI0500
3900-GI1000
3900-GI1500
3900-GI3000
3900-GI5000
—
—
0 - 10 PSIG
0 - 50 PSIG
0 - 100 PSIG
0 - 500 PSIG
0 - 1000 PSIG
0 - 1500PSIG
0 - 3000 PSIG
0 - 5000 PSIG
Price
$400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
85.00
130.00
www.davis.com
H
Accuracy
Display
Power
Enclosure
Process Connection
Over-Pressure Limits
Storage Temperature
Operating
Weight
Size
681
Davis Digital Test Gauge/Calibrator
NIST
it
0.10% of reading accuracy for positive pressure and 1% FS for Vacuum
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
• 0.10% of Reading Accuracy for Positive Pressure and
1% FS for Vacuum Region
• Intrinsically Safe - Cl1, Div 1, Group A,B,C and D
Hazardous Areas. CE Mark and Cenelec
• Vacuum Measurement on all Ranges
• HI/LO Pressure Query and TARE function
• Selectable Engineering Units
Optional carrying case
with pump and gauge
Shown with standard
bottom connection
SPECIFICATIONS
Accuracy
Positive Pressure: 0.1% of reading from
(all effects due to hysteresis,
20 to 100% of FS and 0.02% FS from
linearity, repeatability and temperature) 0 to 20% of FS. Vacuum region: 1% of FS
Compensated range
Operating range
Media Compatibility
Max Indicated Pressure
H
682
Catalog No.
Model
D6551415
65514-15B55
D6551421
65514-21B55
D6551423
65514-23B55
D6551426
65514-26B55
D6551427
65514-27B55
D6551429
65514-29B55
D6551432
65514-32B55
D6551433
65514-33B55
D6551435
65514-35B55
Options
D655771
—
D655772
—
D655773
—
D20250005
2025-0005
D01460215
0146-0215
Pressure Hand Pumps
D8110300
8110-300
D8111300
8111-300
D81123000
8112-3000
NISTPR5
—
NISTPR6
—
-10 to 50 Deg° C (14 to 122 Deg° F)
-20 to 60 Deg° C (-4 to 140 Deg° F)
Materials compatible with 316 SS
At least 110% FS
Maximum Safe Overpressure
Display
Power Supply
Case Material
Pressure Connection
Zero Adjust Range
Size/Weight
Description
200% of Full Scale; 150% FS for 0-5000
5-digit LCD - 0.65" digits (99999 counts)
3 AA alkaline batt.,- apprx 1500 hours life
300 Series Stainless Steel
1/4" NPT Male; bottom connection
100 % of Full Scale
Approx. 5.8" x 4.8" x 2.5" HWD / 1.4 lbs
LCD Resolution
-14.7" Hg Vac to 15 PSI Gauge, bottom connection without mounting flange
.001
.001
.01
.01
.01
.1
.1
.1
.1
Price
$595.00
595.00
595.00
595.00
695.00
695.00
695.00
695.00
745.00
Front 300 Series SS Mounting Flange
Rear 300 Series SS Mounting Flange
Rear Process Connection - 1/4" NPT
RS-232 Cable and Software
Hi-Impact Waterproof ABS Carrying Case with foam lining for handpump and one gauge
50.00
50.00
N/C
75.00
225.00
Pneumatic Hand Pump, 0-300 PSIG
Duplex Hand Pump, 0-300 PSIG/0-25" Hg Vac
Hydraulic Hand Pump, 0-3000 PSIG
400.00
570.00
675.00
85.00
130.00
www.davis.com
Digital Pressure Gauges/2-Wire Transmitters
NIST
it
Economical Replacement for Mechanical Gauges
SPECIFICATIONS
PERFORMANCE
(gage or absolute)
Overpressure
Burst Pressure
Accuracy (linearity, hysteresis,
and repeatability)
Temperature Range
Thermal Zero Shift
Resolution (transducer)
Life
ELECTRICAL
Battery Pack
ENVIRONMENTAL
Storage Temperature
Operating Range
Compensated Range
PHYSICAL
Dial size / Fitting
Construction Materials
Display
Media
•
•
•
•
0-15 to 0-2000 psi (to 10,000 with X 10 multiplier)
2X full scale
10X full scale or 20,000 psi, whichever is less
(15 psi 15.0 ± 1 digit)
30°F to 130°F
± 0.02% F.S./ °F
± 0.02% F.S./ °F
Infinite
>10 million cycles
(2 year life)
-40°F to + 160°F
0°F to + 160°F
30°F to 130°F
31⁄2“ diameter / 1⁄4" NPT connector
17-4 P.H. or 316 S.S.T. (no 0-rings)
31⁄2 digit LCD, .5" digits
Compatible with 17-4 P.H. or 316 S.S.T.
Low cost
Battery Operated (2 year life continuous use)
Accuracy: ± 0.25% Full Scale
Ranges 0 to 2000 psi (to 10,000 with X 10 multiplier on face)
Transmitter Measures Full Scale Pressure Ranges of 0-2000 PSI*,
Gauge or Absolute 4-20 mA Output with 31⁄2 Digit LCD Display
*Ranges to 10,000 PSI with X10 multiplier,
Absolute ranges and additional psig ranges available upon request
SPECIFICATIONS
Performance
Pressure Ranges
(gauge or absolute)
Proof Pressure
Burst Pressure
Thermal Effects
Zero
Span
Output Noise
Regulation
Resolution
Life
0-15 to 0-2000 psi (to 10,000 with X 10 multiplier)
Catalog No. Model
Description
Price
Digital Pressure Gauges
TX588107
PG6000
Digital Pressure Gauge (0-15 psi)
$420.00
TX588108
PG6000
420.00
TX588110
PG6000
420.00
TX588111
PG6000
Digital Pressure Gauge (0-1,000 psi)
420.00
TX588191
PG6000
Digital Pressure Gauge (0-2,000 psi)
420.00
Digital Pressure Transmitters
TX588115
PG4/20
Digital Pressure Transmitter (0-15 psi)
$475.00
TX588116
PG4/20
475.00
TX588117
PG4/20
475.00
TX588118
PG4/20
475.00
TX588119
PG4/20
Digital Pressure Transmitter (0-1,000 psi)
475.00
TX588122
—
Mating electrical connector (Required)
34.00
NISTPR5
—
85.00
NISTPR6
—
130.00
Absolute ranges and additional psig ranges available upon request
2X range
10X full scale, or 20,000 psi, whichever is less
0.035 in cubed
± .25% of full scale (B.F.S.L.)
(15 psi 15.0 ± 1 digit)
± 0.015% F.S./°F
± 0.01% F.S./°F
0.25% P.-P.F.S.
0.01% F.S. max.
Infinite
>10 million cycles
www.davis.com
H
The PG-4/20 offers the convenience and easy
installation of a digital gauge with the full capabilities of a highly 1accurate 4-20 mA two-wire
transmitter. The 3 ⁄2 digit LCD display at the
point of measurement, is calibrated in psi or other engineering units, with remote reading or control by computer or microprocessor. The unit delivers a 4-20 mA output with accuracy of ±.25%
F.S. (B.F.S.L.), offers infinite resolution, high
burst pressure of 10X F.S., and repeatability
better than0.1% F.S.
683
Digital Test Gauge
NIST
it
• Accuracy- ± .05% full scale total error band
(Includes; terminal point, hysteresis, linearity, repeatability and
temperature from -20/150°F)
• Seven Selectable Languages
- English
- Spanish
Ask about
- French
2 Year
- German
- Italian
Save 50%
- Portuguese
on 2nd year
recalibration
- Dutch
• .66˝ High Characters
• For maximum readability
• All-Welded SS Case
- NEMA 4, weatherproof, IP65 enclosure
• Field Calibration, Password Protected
• Configurable Functions
-12 selectable engineering units
- Password protected disable function
- Password protected field calibration
- 7selectable languages
- 7selectable contrast modes
• 1500 Hour Battery Life
NIST
ORDERING INFORMATION
ASHCROFT® DIGITAL
PRESSURE GAUGE
To specify the exact digital
gauge required, select entries
from appropriate tables as
shown in example below.
1
2
30 -2089
H
684
3
4
5
SD - 02L -100#
1. Dial Size: 3"
2. Type: 2089
3. Wetted Parts: 316 SS
4. Connection: 1⁄4 NPT Lower
5. Range: 100 psi
SPECIFICATIONS
ORDERING INFORMATION
CODE
30-2089-SD-02L-vac
PSI* RANGE
PRICE
vacuum
$800.00
30-2089-SD-02L-5
5
800.00
30-2089-SD-02L-10
10
800.00
30-2089-SD-02L-15
15
800.00
30-2089-SD-02L-30
30
800.00
30-2089-SD-02L-100
100
800.00
30-2089-SD-02L-160
160
800.00
30-2089-SD-02L-200
200
800.00
30-2089-SD-02L-300
300
800.00
30-2089-SD-02L-600
600
800.00
30-2089-SD-02L-800
800
800.00
30-2089-SD-02L-1,000
1,000
800.00
30-2089-SD-02L-1,500
1,500
800.00
30-2089-SD-02L-2,000
2,000
800.00
30-2089-SD-02L-3,000
3,000
800.00
30-2089-SD-02L-5,000
5,000
800.00
30-2089-SD-02L-7,500
7,500
800.00
Physical
Dial Size: 3˝
Case Material: 300 SS, Electroplolished
Socket Material: 316 SS
Display
LCD
Display Digits,: 4.5
Bar Graph: 0 to 100% of range
Battery-level indicator
Keyboard Functions
On/Off: 5 selectable options
Backlit: 5 selectable options
Min/Max: stores min & max values
Zero/Clear: zeros display & clears min/max values
Config. Mode
Engineering Units: 13 selectable english & metric units
Update Rate: 4 selectable options
Dampening: pressure averaging with 5options
Auto-Off: 5 selectable options
Languages: 7 selectable options
Backlit: 5 selectable options
Field Recalibration: zero & span options (password protected)
Disable Config. Options: password protected
*Psi standard with selectable units in: Absolute, in.H2O, ftsw, Bar, mBar,
kPa, mPa, mmHg, cmH2O and kg/cm2
Catalog No.
Model
Description
Price
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
—
—
—
—
with Data
85.00
130.00
127.00
195.00
www.davis.com
NEMA 4/NEMA 7 Enclosure Pressure Gauge
NIST
it
™
Battery Powered Digital Gage in NEMA 4/NEMA 7* Enclosure for Hazardous Environments
The PG-3000 Series is a low-cost, high performance digital pressure gage powered from two
long-life battery cells. It offers an extra large
(0.7 inch) 3.5 digital liquid crystal display with
an automatic light actuated circuit which turns
the unit off in darkness. This can greatly extend
the battery life when used in areas which are not
continuously illuminated. The long life sensing
element is vibration and shock resistant, and being fabricated from a single block of stainless
steel provides excellent burst and overpressure
characteristics.
SPECIFICATIONS
Overpressure
Burst Pressure
Batteries
System
Life
Low Battery Detection
Adjustments
Pressure Sensor
Environmental
10x full scale minimum
0.065 in3
30°F to 130°F
Lithium Thionyl Chloride, (2) cells,
user replaceable, C-size
2 to 3 years normal operation
Displays “BAT” when approximately
80% of the capacity is reached
Front accessible (removing cover) “Z”
Zero adjust: ± 10% F.S. nom. range
“S” Span adjust: ± 20% F.S. nom. range
15-5 or 17-4 P.H. stainless steel
Suitable for use in hazardous locations
Class I, Groups B, C, D
Class II, Groups E, F, G
Class III, NEMA 4
Price
Pressure Gauge, 0-20 PSIA, no output
Pressure Gauge, 0-20 PSIG, no output
Pressure Gauge, 0 -100 PSIG, no output
Pressure Gauge, 0 - 1000 PSIG, no output
Pressure Gauge, 0 - 2000 PSIG, no output
$450.00
400.00
400.00
400.00
400.00
400.00
400.00
Pressure Gauge, 0-20 PSIA, 4-20mA output
Pressure Gauge, 0-20 PSIG, 4-20mA output
Pressure Gauge, 0 -100 PSIG, 4-20mA output
Pressure Gauge, 0 - 1000 PSIG, 4-20mA output
Pressure Gauge, 0 - 2000 PSIG, 4-20mA output
575.00
525.00
525.00
525.00
525.00
525.00
525.00
85.00
130.00
www.davis.com
H
Catalog No.
Description
Pressure Gauges — No Output
TX588123
PG3000-20A-0
TX588125
PG3000-20-0
TX588192
PG3000-50A-0
TX588193
PG3000-100A-0
TX588194
PG3000-500A-0
TX588195
PG3000-1000A-0
TX588196
PG3000-2000A-0
Pressure Gauges — 4-20mA Output
TX588124
PG3000-20A-4
TX588126
PG3000-20-4
TX588197
PG3000-50A-4
TX588198
PG3000-100A-4
TX588199
PG3000-500A-4
TX588200
PG3000-1000A-4
TX588201
PG3000-2000A-4
Certification
NISTPR5
—
NISTPR6
—
• Self-Powered by Long-Life Batteries
• Very Large LCD Display
• Water, Dust, and Explosion Proof
• Automatic Light-Actuated Battery-Saver Circuit
• ± 0.25% of Full Scale Accuracy
• Optional 4-20 mA output
*Class 1, Group B, C, or D
685
Signet Pressure Sensor/Transmitter System
Step 1 Choose a Pressure Sensor
SPECIFICATIONS
Proof Pressure
Accuracy
Wetted Materials
Standards
150% of full scale
± 1% of full scale
PVDF, Ceramic, FPM (Viton®)
0°C to 85°C (32°F to 185°F)
CSA, CE, UL Listed
NIST
• Standard 3/4" NPT
Process Connection
• Flush ceramic diaphragm
• Easy installation
it
• HVAC systems
• Scrubbers
• Pump Protection
• Marine
• Water Management
• Irrigation Systems
• Wastewater
Catalog No.
Model
Description
SG908420
SG908421
SG908422
SG908423
SG908426
SG908427
3-2450-1L
3-2450-2L
3-2450-1H
3-2450-2H
3-2450-1U
3-2450-2U
Pressure Sensor 3/4" male NPT, 0 to 50 psi, 15 ft cable remote
Pressure Sensor 3/4" male NPT, 0 to 50 psi, 6 in cable integral
Price
$359.00
359.00
359.00
359.00
359.00
359.00
Step 2 Choose a Fitting
All panel mount transmitters
include everything for panel
installation. Panel mount transmitters fit into a standard 1/4
DIN panel cutout.
The Universal Mount Kit includes a conduit base, locking ring, and universal
adapter for mounting the transmitter on a
pipe, wall, or other stationary surface.
Included
Panel Mount 3-8450-XP
Universal Mount 3-8450 Transmitter
Cat. No. SG9226303
Price $46.00
The integral Mount Kit includes a conduit
base, locking ring, and integral adapter
for mounting the transmitter and sensor
directly onto a pipe.
Integral Mount 3-8452 Transmitter
Cat. No. SG38052
Price $52.00
Step 3 Choose a Pressure Transmitter
H
686
Panel Mount
3-8450-XP
Field Mount
3-8450-X
• psi, Bar, or kPa
display
• Integral or remote
mounting
• Single point calibration
• Dual input/output
option
• NEMA 4X/IP65
• Large pushbuttons
SPECIFICATIONS
Part No.
3-8450-1
3-8450-2
3-8450-3
Wire Power
2
4
4
Catalog No.
Model
Description
SG384501
SG384502
SG384503
SG3845010
SG3845020
SG3845030
NISTPR132
NISTPR133
3-8450-1
3-8450-2
3-8450-3
3-8450-1P
3-8450-2P
3-8450-3P
—
—
Pressure Transmitter, Field Mount, 1 input
Pressure Transmitter, Field Mount, with relays
Pressure Transmitter, Field Mount, dual input/o utput
Pressure Transmitter, Panel Mount, 1 input
Pressure Transmitter, Panel Mount, with relays
Pressure Transmitter, Panel Mount, dual input/output
Sensor Input
1
1
2
4 to 20 mA Output
1
1
2 Sensor 1, (Sensor 2 or Delta P)
Open Collector/Relay
1 O.C. Hi, Lo or Off
2 Relays Hi, Lo or Off
2 O.C.’s Hi, Lo or Off
Price
$379.00
450.00
645.00
379.00
450.00
645.00
99.00
130.00
www.davis.com
Handheld Pressure Indicators
NIST
it
• Ranges 0 to 1 psi through to 10,000 psi
• 0.1% FS accuracy
• Rugged, lightweight handheld design
• Leak test, tare, max/min and filter
• °F and °C ambient temperature
• Optional pneumatic and hydraulic hand pumps
Ask about
2 Year
NIST
H
Save 50%
on 2nd year
recalibration
Description
Price
SPECIFICATIONS
DR7051
DPI705
Portable Pressure Indicator, 10 psig
$495.00
DR7053
DPI705
495.00
DR7054
DPI705
495.00
DR7055
DPI705
Portable Pressure Indicator, 30 psi absolute
495.00
DR70515
DPI705R
795.00
DR113
IS
Intrinsically Safe Option
100.00
Media Compatibility Differential low side-Clean dry gasses
Differential high side-non corrosive liquids or
gasses
Gauge and absolute sensors-materials compatible
with stainless steel
Engineering Units
PSI, BAR, mBAR, mH2O, in H2O, (4° and 20°C),
ft H2O (4° and 20°C), inHg, mmHg, mHg, Pa, hPa,
kPa, MPa, kgf/cm2, and one user definable scale
Accuracy
± 0.1% FS including linearity, hysteresis, and
repeatability
Temperature Effect ± 0.02% rdg/°C
Power Supply
3 x AA alkaline batteries, approx. 300 hours use
Size
7.6 x 3.6 x 1.5"
Weight
1 lb.
DPI705 includes basic instrument with internal pressure sensor
DPI705R includes basic instrument with remote sensor and cable
NISTPR5
—
NISTPR6
—
85.00
130.00
www.davis.com
Catalog No. Model
687
Single/Dual Sensor Pressure Tester
NIST
Features at a touch...
H
688
• Selectable
engineering units
• Tare
• Backlit display
™
Ask about
2 Year
The PT indicator is an extremely versatile pressure
measurement and test instrument. Each PT indicator provides the ability to select any of
eight factory programmed engineering units, monitor and display minimum and maximum
pressure values, program
damping, tare out displayed
measurement values and communicate over the standard RS232
interface. All these capabilities are
accessible through easy-to-follow keypad
functions as well as over the RS232 interface.
• Push-button zero
adjust
• Min/Max memory
• Variable damping
it
NIST
Save 50%
on 2nd year
recalibration
• Port Select
Options
• Rechargeable
batteries
PERFORMANCE SPECIFICATIONS
MEDIA COMPATIBILITY
PHYSICAL CHARACTERISTICS
Accuracy:
PT1000: ± 0.1% of span (.05% of span available at additional cost)
PT 2500: ± .025% of span
Calibration: (Traceable to N.I.S.T.)
Recalibration: Complete recalibration can be accomplished over instrument RS232 interface. Zero and span can be accomplished via front
panel keypad.
Resolution: ± 0.002% of span (max)
Repeatability: (typical)
± 0.01% of span (all psi ranges)
± 0.01% of span, (ranges of 1" through 200" H2O)
± 0.02% of span, (ranges below 1" H2O)
Pressure Types: gauge (sealed gauge over 300 psi), absolute, compound, differential and vacuum (as noted in range chart)
Standard:
Inches of water ranges clean, dry non-conductive and
non-corrosive gases.
Ranges above 500 psi: liquids and gasses compatible
with 316 SS.
Overpressure:
Inches of H2O ranges
50 psi positive, 15 psi negative
psi ranges
200% for ranges of 5 through 1000 psi
150% for ranges of 1500 psi and above
Power Requirements:
Standard:
AC adapter provided for operation off standard
110 VDC, 60 Hz supply, 220 VDC, 50 Hz
Optional:
Built-in rechargeable NiCad power pack (consult
factory for availability of alkaline battery power
pack).
Battery Life:
25 hours (nominal) without back-lighting of LCD.
Activation of RS232 interface will result in
approximately a 30% reduction in battery life.
Pressure Tester with 1 Sensor
PT2500
± .025% Accuracy
Cat. No.
Price
Ranges in Inches of Water
Additional Sensors
PT1000
± 0.10% Accuracy
Cat. No.
Price
PT2500
± .025% Accuracy
Cat. No.
Price
PT1000
± 0.10% Accuracy
Cat. No.
Price
0.25, 0.5 or 1.0, .07%
2.0, 3.0, 5.0, 10.0, 15.0, 25.0, 50.0, 100.0 or 200.0, .06%
Compound Ranges in Inches of Water
AS4
AS16
$1,785.00
1,635.00
AS6
AS18
$860.00
710.00
± 0.125, ± 0.25 or± 0.50, .07%
± 1.0, ± 2.5, ± 5.0, ± 7.5, ± 12.5, ± 25.0, ± 50.0 or ± 100, .06%
Compound Ranges in PSI - Vacuum/Pressure
AS52
AS64
1,635.00
1,675.00
AS54
AS66
910.00
750.00
5/5, 10/10, 15/15, 15/30 or 15/60
Ranges in PSI - Gauge
AS100
$1,835.00
AS101
1,715.00
AS102
$910.00
AS103
790.00
5, 10, 15, 30, 50, 60, 100, 150, 200 or 300
500, 600, 1000, 1500, 2000, 2500, 3000, 5000, 6000 or 7500
Ranges in PSI - Absolute
AS120
AS160
1,745.00
1,875.00
AS121
AS161
1,620.00
1,745.00
AS122
AS162
820.00
950.00
AS123
AS163
695.00
820.00
5, 10, 15, 30, 50, 60, 100, 150, 200 or 300
500, 600, 1000, 1500, 2000, 2500, 3000, 5000, 6000, 7500, 10,000
Vacuum Ranges in PSI
AS220
AS260
1,835.00
1,965.00
AS221
AS261
1,715.00
1,835.00
AS222
AS262
910.00
1,040.00
AS223
AS263
790.00
910.00
AS301
1,835.00
AS302
1,715.00
AS264
Please specify range and allow approximately 6 weeks for delivery on all Pressure Testers
Optional Accessories
910.00
AS265
790.00
5, 10 or 15
Catalog No.
Description
AD2291
AS2292
AS2293
AS2294
Built-in Rechargeable Batteries
Back-Lit Liquid Crystal Display
316SS Isolation (per sensor)
Handle Assembly
Price
95.00
95.00
115.00
115.00
Catalog No.
Description
Price
AS2295
Panel Mounting Brackets
25.00
NISTPR100
NISTPR101
85.00
130.00
www.davis.com
Digital Pressure/Leak Indicator
• Leak detection in either leak rate or pressure decay modes
• Flow velocity and volume measurement using standard pitot tubes
and anubars
• Automatic % error calculation simplifies transmitter or transducer calibration
• Measurement of pressure, temperature, voltage and current
• Two channel — simultaneous measurement and display of pressure,
temperature, voltage or current in any combination
• Interchangeable pressure and temperature modules
• Programmable damping
NIST
Standard Display
Engineering Units
Temperature Range
Electrical Sourcing Specification
Electrical Measurement Specification
Inputs (Volts)
0/10 Vdc
0/30 Vdc
Input (mA)
0/20 mA
0/50 mA
RS232 Serial Interface
ST2A1
AS22
ST2A2
AS23
ST2A3
Two Line Digital Display Unit with
110 VAC/60 Hz AC Adapter
Optional Features
AS300
B
AS302
N
AS303
A
AS304
H
AS305
L
AS306
P
AS308
D1
Back Lit LCD Display
NiCad Batteries (rechargeable)
Alkaline Batteries (non-rechargeable)
Handle
Loop Power Supply
Panel Mounting Brackets
Standard Data Logging Memory &
High/Low Alarms and Differential
Measurement Firmware
TC Interface for J, K, T
AS322
AQS-TC1
RTD Probe Interface Assembly
AS310
AQS-RT1
RTD probe interface assembly for Pt100,
Ni 120, Cu 10 and other RTDs with resistance
outputs of 400 ohms or less
AS311
AQS-RT2
RTD interface assembly for use with Pt1000
RTD probe and other RTDs with resistance
outputs of 4000 ohms or less
Price
$1,170.00
Catalog No. Model
Alphanumeric LCD, 0.37-inch height, 2
lines, 16 characters/line
psi, in.H2O, in. Hg, ftSW, bar, mbar,
kPa, Mpa, mmHg, cmH2O, mmH2O
and kgcm2 and any single
user-programmable engineering unit
32° to 120°F (0 to 49°C)
24 Vdc at 25 mA
Accuracy
± 0.025% F.S.
± 0.10% F.S.
Accuracy
± 0.03% F.S.
± 0.05% F.S.
with 9-pin D type at 300, 1200, 2400,
9600 baud
ST-2A Base unit: 3.0 lb (1.4 kg)
Description
Price
RTD Probes
AS312
840X010-01
Pt100 (385), 0.125 diameter, 12 inch length,
handle and 5 ft. coiled cable
275.00
AS313
840X010-02
275.00
AS314
840X010-05
275.00
AS315
840X010-06
275.00
AS316
840X010-03
10 ft. standard cable
240.00
AS317
840X010-04
240.00
AS318
840X010-07
240.00
415.00
AS319
840X010-08
240.00
415.00
AS320
828X136-01
TA4F mating connector for use with AQS-RT
module and our own RTD probes.
(probes are supplied with the TA4F connector)
415.00
NISTPR44
—
199.00
NISTPR45
—
250.00
1,195.00
1,195.00
95.00
95.00
95.00
40.00
228.00
25.00
220.00
20.00
www.davis.com
H
Description
AS21
™
SPECIFICATIONS
Weight
Catalog No. Model
it
689
Heavy Duty Pressure Meter
NIST
it
Meter automatically senses plug-in transducer’s range and calibration
• Six interchangeable transducers with ranges of 30, 75, 150,
300, 700 and 1500 psi
• Displays 8 types of pressure units (bar, psi, Kg/cm2, mmHg,
inch/Hg, meter/H2O, inch/H2O and Atmosphere)
• Easy push-button Zero
• Push button span adjust provides fine tuning for critical
measurements
• Records Max/Min readings with recall
• Data Hold and Auto Power Off
• Microprocessor design provide simple operation
• Accurate to 0.25% of Full Scale + 1 digit
• Built-in RS-232 PC interface with optional Windows® 95/98
compatible software
• Includes 9V battery and protective rubber holster
Interface Options
• Optional Windows®, 95/98 compatible Data Acquisition
Software and serial cable enable user to display and capture
readings on a PC
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
H
690
SPECIFICATIONS
Sensor Type
bar
psi
Kq/cm2
mm/Hg
inch/Hg
meter/H2O
inch/H2O
Atmosphere
30 psi
Max. Range (Resolution)
2
(0.002)
29
(0.02)
2.040
(0.002)
1500
(2)
59.05
(0.05)
20.40
(0.02)
802
(1)
1.974
(0.002)
75 psi
5
(0.005)
72.5
(0.1)
5.095
(0.005)
3750
(5)
147.6
(0.1)
50.95
(0.05)
2006
(2)
4.935
(0.005)
150 psi
10
(0.01)
145
(0.2)
10.19
(0.01)
7500
(10)
295.2
(0.2)
101.9
(0.1)
4010
(5)
9.87
(0.01)
300 psi
20
(0.02)
290
(0.2)
20.40
(0.02)
15000
(20)
590.5
(0.5)
204.0
(0.2)
8020
(10)
19.74
(0.02)
Catalog No.
Model
Description
EH407495
EHPT30
EHPT75
EHPT150
EHPT300
EHPT700
EHPT1500
EH11948062
EH407001
NISTRC1
NISTRC2
407495
PT30
PT75
PT150
PT300
PT700
PT1500
409997
407001
—
—
Heavy Duty Pressure Meter
30 psi Pressure Transducer
Soft Vinyl Carrying Case
Data Acquisition Program and Cable
700 psi
50
(0.05)
725
(1)
50.95
(0.05)
37500
(50)
1476
(1)
509.5
(0.5)
20050
(20)
49.35
(0.05)
1500 psi
100
(0.1)
1450
(2)
101.9
(0.1)
75000
(100)
2592
(2)
1019
(1)
40100
(50)
98.7
(0.1)
Price
$199.00
299.00
299.00
299.00
299.00
299.00
299.00
19.00
69.00
125.00
199.00
www.davis.com
Easy Pressure Measuring Systems
NIST
it
The EPM-2000 series (Easy Pressure
Management) covers a broad variety of applications within pressure measurement. You may
measure the pressure on your compressor,
pneumatic operations, the barometric pressure
in energy calculations, level of liquid, water pressure, differential pressure on flow measurements, pressure control valves, digestion tanks
and many others.
With the Ametek EPM-2000 series you can check
the pressure with ease. All systems are supplied with a small air pump with fine adjustment
and vent valve. Hose and fittings are included
enabling you to set up a test/calibration system.
• Complete system in one case
• Fittings and pump included
• Selectable units
• Intuitive features
• Overpressure protection
• Compatible with non-corrosive fluids
• Backlit display
SPECIFICATIONS
System 1
Low Pressure with Differential
± 1.9 psi (± 139 mbar)
Model
Pressure Range
Accuracy
H
6.4 oz.
15.5 x 13.8 x 4.0 in (395 x 350 x 100 mm)
5 lbs (2.3 kg)
14-122°F (-10 - 80°C)
IP-65
Catalog No.
JF7511
JF7521
JF7531
System 3
Absolute Pressure
29 psia (2 bar abs)
Model
75-EPM SYSTEM 1
75-EPM SYSTEM 2
75-EPM SYSTEM 3
Description
Low pressure/differential indicator, pump, fittings and case
Pressure/differential indicator, pump, fittings and case
Absolute pressure indicator, pump, fittings and case
Price
$845.00
845.00
845.00
Accessories
NISTPR44
NISTPR45
NISTPRQ44
NISTPRQ45
—
—
—
—
2 Year NIST Traceable Certificate with Data
199.00
250.00
298.00
375.00
www.davis.com
Pump
Compatibility
Power Supply
Battery Life
Auto Switch Off
Low Battery Indication
Overpressure Indication
Unit Measurement
(L x H x W)
Unit Weight
System Dimensions
(L x H x W)
System Weight
Protection Class
System 2
Pressure with Differential
-14.5 - 101 psi (-7 - 7bar)
68-86°F (20-30°C), 0.1% of Reading ± 1% of full scale
14-122°F (-10-50°C), 0.15% of Reading ± 1% of full scale
Handheld Pneumatic Pump
Non-Corrosive Liquids and Gases and Non-Hydrocarbons
(2) AA Cells
Typically 500 Hours
12 minutes
On Display
On Display
6.1 x 2.6 x 1.6 in (155 x 67 x 40 mm)
691
Universal Pressure Vacuum and Temperature Meter
NIST
it
UniMano 2000
• Micro controller based
• Pressure/Vacuum and Temperature measurement
• 8 engineering units for pressure
• YSI 7000 series or Thermocouple K/J type
• Auto zero (pressure)
• Leak detection (pressure)
• Peak hold (pressure)
• Absolute pressure models available
• High accuracy & resolution
• Temperature compensated sensor
• Two line 16 character LCD display
• Membrane key pad
• Compact - palm size
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
H
692
Pressure Ranges
Vacuum Range
Accuracy (pressure)
Accuracy (vacuum) Range
Pressure Limit
YSI Temperature Measurement
K/J Type Temperature Measurement
YSI Temperature Measurement
K/J Type Temperature Measurement
Compatibility
Pressure Connection
Temperature Connection
Housing
2,10, 30, 60, 100 and 200 PSI full range
Full range (pressure) or limited to a maximum of -10PSI
0.1% of full scale reading ± 1 count
± 0.5% FULL SCALE vacuum
Double the maximum rated pressure
-5°C to 100°C
-40°C to 780°C
0.1°C
0.2°C
0°C to 50°C
Non corrosive fluids and gases
Lure lock
YSI 7000 - 1/4" phone jack or K/J Type - mini connector
High impact ABS plastic case
Catalog No.
Model
Description
NH747115
NH747116
NH747117
NH747118
NH747119
NH747120
NH747121
NH747122
NH747123
880-02PSIG-KJ
880-02PSIG-YSI
880-10PSIG-KJ
880-10PSIG-YSI
880-30PSIG-KJ
880-30PSIG-YSI
880-60PSIG-KJ
880-60PSIG-YSI
880-100PSIG-KJ
Universal Pressure/Vacuum & Temperature Meter 2 PSI to -2 PSI, Temp. K/J type
Universal Pressure/Vacuum & Temperature Meter 2 PSI to -2 PSI, Temp. YSI type
Universal Pressure/Vacuum & Temperature Meter
Price
$795.00
795.00
795.00
795.00
795.00
795.00
795.00
795.00
795.00
www.davis.com
Intrinsically Safe Pressure Vacuum Gauge
NIST
it
DigiMano 2000 UL Certified
• UL Certified: Ul Certified for safe to use in hazardous
locations Class I, Division I
• Versatile: Pressure and Vacuum, Peak function
Five-Engineering Units (PSI, mBar, InH20, mmHg, CMH20)
• High Accuracy: 0.1% or 0.05% full scale Pressure,
0.25% or 0.1% Vacuum
• Rugged: Durable aluminum case
• Compact: Palm size
• Large Display: 5" high, 4.5 digit LCD display
• Compatibility: Wide range of gases and fluids
• Choice of Ranges: 5 Pressure ranges to choose from
5 PSI to 200 PSI
SPECIFICATIONS
Pressure Range
Vacuum Range
Over Range
Temperature
Compensation
Resolution
Media Compatibility
Power
Housing
Transducer
Pressure Port
5 PSI, 20 PSI, 50 PSI, 100 PSI and 200 PSI
Full range (pressure) or limited to a maximum of -10PSI
2 x full scale, + count
0°C to 50°C
Catalog No.
Model
Description
Accuracy 0.05%
NH0311171
NH0311181
NH0311141
NH0311151
NH0311161
220-05PSI-UL
220-20PSI-UL
220-50PSI-UL
220-100PSI-UL
220-200PSI-UL
Pressure/Vacuum Gauge 5PSI to -5PSI
Pressure/Vacuum Gauge 100PSI to -10 PSI
Custom ranges available, Please inquire
$795.00
795.00
795.00
795.00
795.00
Accessories
NH0311191
NH0311192
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
CASE-307
220-203C
—
—
—
—
Custom molded hard carrying case
Tubing and connector kit
47.00
45.00
85.00
130.00
127.00
195.00
1 part of 10,000
Fluids and gas
9 Volt Alkaline Battery
Die-cast aluminum case with sealed membrane switch
Stainless Steel
1/8" Male NPT. Adaptable to any standard fitting
using the adapter kit provided
www.davis.com
H
Price
693
Precision Digital Pressure and Vacuum Gauge
NIST
it
DigiMano 2000
Catalog No.
• Versatile: Pressure and Vacuum, Peak function. Five engineering units
(PSI, mBar, InH2O, mmHg, CmH2O) Kpa units available
• High Accuracy: 0.1% full scale (NIST Traceable)
• Rugged: Durable aluminum case
• Compact: Palm size
• Large Display: 5" high, 4.5 digit LCD display
• Compatibility: Wide range of gases and fluids
• Cost Effective: Excellent Performance, Price Value
• Choice of Ranges: 6 models to choose from 2 PSI to 200 PSI
SPECIFICATIONS
Pressure Range
Vacuum Range
Over Range
Temp. Compensation
Resolution
Power
Housing
Pressure Port
H
694
2 PSI to 200 PSI
Full range (pressure) or limited to a max. of -10 PSI
2 x full scale range
0°C to 50°C
1 part of 10,000
9 Volt Alkaline battery. AC Adapter Optional
Die-cast aluminum case with membrane switch
1/8" FNPT/1/4" FNPT Connector Adapter set included
1/8" MNPT to 1/4" FNPT, 1/8" FNPT to 1/4" Male
Model
Description
Price
Ordering Information (0.1% Accuracy)
NH747127
220-02CmH2O Precision Digital Pressure/Vacuum $495.00
Gauge 2 PSI to -2 PSI
NH747128
220-10CmH2O Precision Digital Pressure/Vacuum 495.00
Gauge 10PSI to -10 PSI
NH747129
NH747130
NH747131
NH747132
Kpa units are available in all models, call for part numbers and pricing
Ordering Information (0.05% Accuracy)
NH747133
220-05-PSI-05 Precision Digital Pressure/Vacuum 575.00
NH747134
NH031114
NH031115
NH031116
Kpa units are available in all models, call for part numbers and pricing
NH0311192
220-203C
Tubing & Connector Kit
45.00
(assortment of connectors & tubing)
NH031108
204
Syringe Pump - for generating
35.00
controlled pressure/vacuum
NISTMA07
—
99.00
NISTMA08
—
NIST Traceable Certificate with Data 130.00
NISTMAQ07
—
148.00
NISTMAQ08
—
195.00
with Data
Digital Vacuum Gauge
NIST
it
The Digivac 100 is a digital vacuum gauge
which uses time-proven technology and is now
available with a wide variety of sensors and
ranges.
The 100 offers more than just an attractive,
rugged design. It uses precision integrated
circuits to provide better accuracy and
repeatability than analog gauges. Most
versions energize the gauge tube with
a precision temperature compensated
analog current source.
• Accurate
• Portable
• Rugged
• Fast
SPECIFICATIONS
Display
Gauge Tube Cable Length
Sensor Connection
Power AC Adapter
Size
.70 inch high, 3 1⁄2 digit, LCD
9 Feet
1
⁄8" MPT typical
115 VAC 60 hz or 230 VAC 50/60hz
2.25 x 5.0 x 5.5
Catalog No. Model
Description
FD100
100-TC
FD101
100-7
NISTPR5
NISTPR6
—
—
Portable Benchtop Digital
$399.00
Vacuum Gauge (0-1999 microns)
Portable Benchtop Digital Vacuum
399.00
Gauge (0-760 torr)
85.00
Price
www.davis.com
NIST
Suitable for field or laboratory use, the new
VG64 delivers high precision at a low price.
It can accurately read vacuum from 12,000 microns down to 0 over a wide temperature range of
35°F to 125°F (2°C to 52°C). The vacuum can be
displayed in user selectable units: Microns
(milliTorrs), PSI, milliBars, Inches of Hg and
Pascals.
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Display
Updated every 1/2 second. 1 Micron resolution
below 200 Microns of vacuum
Sensor Type
Thermistor
Connector Type
Standard 1/4 inch male flare fitting
Vacuum Range
0 - 12,000 Microns (0 - 1,600 Pascals) with
vacuum increasing/decreasing indicator when
above 12,000 Microns
Scale
Microns, PSI, InHg, milliBars, Pascals, Torr,
milliTorr
Operating Temp. Range 35°F to 125°F ( 2°C to 52°C)
Overpressure
300 PSI max (20 Bar)
Accuracy
+/-10% (0 to 1000 Microns)
Power Source
9 Volt Alkaline Battery (not included)
Continuous Usage
Over 35 Hours
Auto Shutoff
After 10 minutes when vacuum reading is above
12,000 Microns (12 Torr)
Dimensions/Weight
5 1/2" H X 3" W X 1 1/4" D / 6.7 ounces
• Reads vacuum in 7 international units
• Built-in hanger
• Saves battery power
• Cleanable sensor
• Uses standard 9 Volt battery
• Auto shut off
Catalog No.
Model
Description
SU6400
NISTPR5
NISTPR6
V64
—
—
Vacuum Gauge with Digital and Analog Display
$149.00
85.00
135.00
NIST
it
SPECIFICATIONS
Measuring Range
Uncertainty of measurement
Power supply
Connection
Standards applying
Dimensions (L x W x H)
825 - 1 Torr, 1100 - 1 mbar (hPa)
< +/- 1 Torr/mbar (after proper zero and atmospheric point setting)
built-in, lithium round cells (AA)
small flange NW 16 and screw in nozzle for 6-10 mm I.D. hoses (made o PBT)
conformity with EC low-voltage and EMC directives, conformity with IEC 1010
115 x 115 x 65 mm (with small flange)
Catalog No.
Model
Description
BR682902
68 29 02
NISTPR5
NISTPR6
—
—
Vacuum gauge DVR 2 with built-in pressure transducer and digital and analogue display.
With NW 16 small flange connection and screw in nozzle for 6-10 mm I.D. hoses; instructions for use
Price
$645.00
85.00
130.00
www.davis.com
H
• Reading independent of gas
• Digital pressure display enables precise readout
• Analogue display is easy to read and provides clear trend indication
• Precise, thermally stable pressure reading
• Excellent long-time stability
• Automatic sleep mode (selectable time setting, factory set: 15 min)
• Battery operated
• User selectable vacuum units (Torr, mbar, hPa) electronic scale conversion
695
Benchtop Vacuum Gauge
NIST
it
• Digital pressure display: precise read out
• Analogue display: easy to read, clear trend indication
• Separate gauge head with aluminia ceramics transducer with high corrosion
resistance and excellent long-time stability
• On the spot measuring and network capability
• Gauge head mounted direct to proper spot of vacuum system
• Pressure read out at a convenient location
• User selectable pressure units (mbar, Torr, hPa)
• Electronic scale conversion
• Digital calibration at atmosphere and vacuum
• Pressure display over four decades
• Environmentally friendly: no mercury, no sensitive mechanical components
• Conforms with EC Low voltage & EMC directives (class A & B requirements)
SPECIFICATIONS
Measuring range
Temperature coefficient
Gauge head
Vacuum connection
Power supply
Dimensions (L x W x H) / Weight
825 - 0.1 Torr, 1100 - 0.1 mbar (hPa)
<+/-1 Torr/mbar +/- 1 digit (after proper zero and atmospheric point setting and at constant temperature)
<0.07 mbar/K
VSK 5/pressure transducer made of alumnia/ceramic
small flange NW 16 and screw-in stepped hose nozzle for 6-10 mm I.D. hoses (made of PBT)
230 V ~ +/-10% 50-0 Hz or 100-120 V ~50-60 Hz
197 x 132 x 87 mm (instrument) / Vacuum gauge 1.4 kg; Gauge head 0.5 kg
Catalog No.
Model
Description
Price
BR682913
NISTHP1
NISTHP2
68 29 13
—
—
Vacuum gauge DVR 5 Set with calibrated gauge head VSK 5: mains cable with plug
$1,190.00
125.00
159.00
Benchtop Vacuum Meter/Controller
it
• Manual or semi-automatic determination of process pressure setting
• Automatic setting of pressure intervals, manual facility override
• Analogue display provides clear trend indication
• Electronic scale conversion for the most common pressure units
• Digital calibration
• Overpressure indication
• Integrated electrical overload protection: short circuit proof
transformer (no fuses)
• Low electromagnetic radiation: metal housing, radio frequency interference filter for
protection of sensitive nearby instruments, high immunity from electromagnetic noise
• Basic unit of the Vacuum Management System VMS
H
696
NIST
SPECIFICATIONS
Pressure transducer
Vacuum connection
Measuring range
Power supply
Dimensions (L x W x H) / Weight
piezoresistive absolute pressure transducer, integrated into the unit with anticorrosion design
stepped hose nozzle PBT for hoses with 6-10 mm inner diameter
975 - 1 Torr, 1300 mbar - 1 mbar (hPa) (~1200 Torr)
<0.5% of measuring range (after proper adjustment at zero and atmospheric point setting and at constant temperature)
0°C - 40°C
100-120 V~50-60 Hz or 230 V ~ +/-10% 50-60 Hz
240 x 132 x 87 mm / 1.5 kg
Catalog No.
Model
Description
Price
BR683153
NISTHP1
NISTHP2
68 31 53
—
—
Vacuum Controller CVC 2, mains cable with plug according to national standards
$1,595.00
125.00
159.00
www.davis.com
Differential Pressure Gauge Series 2000
NIST
it
Indicates Low Air or Gas Pressures of Positive, Negative or Differential
These gauges are used to measure fan and blower pressures,
filter resistance, air velocity, furnace draft, pressure drop across
orifice plates, liquid level with bubbler systems. Can be flush or
surface mounted. Requires 4 9⁄16" hole for flush, panel mount. Also
available as a pressure switch/gauge.
SPECIFICATIONS
Ambient Temperature Range
Pressure Rating
Accuracy
Connections
20° to 140°F
-20 Hg to 15 psig
± 2% of full scale (3% on 0 and 4% on 00 ranges)
throughout range at 70°F
1
⁄8" NPT high and low pressure taps, duplicated—
one pair on side and one pair on back
Mini-Differential
Pressure Gauges
Combining high
accuracy, readability,
compactness, dependability,
and low cost.
SPECIFICATIONS
20° to 120°F
50 psig surge, 30 psig continuous
± 5% of full scale at 70°F
2- Barbed for 3⁄16" ID tubing
Polycarbonate and glass filled nylon,
high impact acrylic lens
Catalog No. Model
Description/Gauge
DW33660
DW33661
DW33662
DW33664
Pressure Gauge 0 to .50" w.c.
Pressure Gauge 0 to 1.0" w.c.
2-5000-0
2-5001
2-5002
2-5005
Range (in. H2O)
Minor Div.
2000-00
2000-0
2001
2002
2003
2004
2005
2010
2015
2020
2025
2030
2040
2050
2100
2150
Model
0 to .25
0 to .50
0 to 1.0
0 to 2.0
0 to 3.0
0 to 4.0
0 to 5.0
0 to 10
0 to 15
0 to 20
0 to 25
0 to 30
0 to 40
0 to 50
0 to 100
0 to 150
Range Zero Center
(in. H2O)
.005
.01
.02
.05
.10
.10
.10
.20
.50
.50
.50
1.0
1.0
1.0
2.0
5.0
Minor Div.
Price
$62.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
56.00
DW33521
DW33522
DW33523
DW33525
DW33527
2300-0
2301
2302
2310
2330
.25 to 0 to .25
.5 to 0 to .5
1 to 0 to 1
5 to 0 to 5
15 to 0 to 15
.01
.02
.05
.20
1.0
61.50
61.50
61.50
61.50
61.50
Catalog No.
Model
Range PSI
Minor Div.
DW33530
2203
0 to 3
.10
56.00
DW33533
2210
0 to 10
.20
90.50
*These ranges are equipped with medium pressure (MP) option, standard. (rated 35 psig)
DUAL SCALE AIR VELOCITY UNITS
Catalog No.
Model
Range
(in. H2O)
Range,
Air Velocity F.P.M.
DW33536
2000-00AV
0 to .25
300 to 2000
62.00
DW33537
2000-0AV
0 to .50
500 to 2800
56.00
DW33538
2001AV
1 to 1.0
500 to 4000
56.00
DW33539
2002AV
1 to 2.0
1000 to 4000
56.00
DW33540
2010AV
0 to 10
2000 to 12500
56.00
Catalog No. Model For 2000 Series Gauges
Price
$44.00
44.00
44.00
44.00
Catalog No. Model
Description/Gauge
DW33675
A-497
DW33676
A-609
NISTPR132
NISTPR133
—
—
Surface Mounting Bracket:
3.75
For the Mounting of the Minihelic Gauge
Air Filter Kit Mounting Kit with Two Static
34.25
Pressure Tips, Two Molded Vent Valves, Two 5 ft.
lengths of 1⁄4" Aluminum Tubing and Necessary Adapters
99.00
130.00
Model
DW33501
DW33502
DW33503
DW33504
DW33505
DW33506
DW33507
DW33510
DW33511
DW33512
DW33513
DW33514
DW33515
DW33516
DW33519
DW33520
Catalog No.
DW33582
A610
Type Mounting Kit for mounting a magnahelic on vertical or 13.00
horizontal on 1⁄4" x 2" pipe. Includes steel mounting plate,
Includes steel mounting plate with 2 “U” clamps, nuts and lockwashers.
DW33584
ASF
Adjustable Signal Flag
12.00
DW33585
A432
Portability Kit (Includes carrying case,
standard hold bracket, tubing and terminal tube with holder)
23.25
DW33586
A605
Air Filter Kit (2 static pressure tips and other
accessories to turn unit into air filter gauge)
23.25
NISTPR132
—
NISTPR133
—
99.00
130.00
www.davis.com
H
Rated Total Pressure
Accuracy
Connections
Housing
Catalog No.
697
Dwyer Differential Pressure Gauge Series 4000
Catalog No.
Model
Range
(in. H2O)
Minor Div.
DW33401
DW33403
DW33406
DW33409
DW33411
DW33412
DW33414
DW33418
DW33420
DW33423
4000-0
4002
4005
4010
4020
4025
4040
4100
4200
4500
0 to .50
0 to 2.0
0 to 5.0
0 to 10
0 to 20
0 to 25
0 to 40
0 to 100
0 to 200
0 to 500
.01
.05
.10
.20
.50
.50
1.0
2.0
5.0
10.0
Catalog No.
Model
Range PSI
Minor Div.
DW33432
4201
0 to 1
.02
246.00
DW33436
4205
0 to 5
.10
246.00
DW33438
4215
0 to 15
.50
246.00
DW33440
4230S
0 to 30
1.0
246.00
DW33442
4260S
0 to 60
2.0
246.00
Catalog No.
Model
Description
DW33484
DW33485
DW33486
ASF
A314
B
DW33487
Price
NISTPR133
Measure Pressures of Gas, Air or Liquids
99.00
130.00
For air or compatible gases or liquids.
Measures pressure, vacuum or differential.
Suitable for internal pressures to 500 psig.
May be flush or surface mounted. 5" diameter,
requires a 413⁄16" hole for flush mounting.
Dwyer Pressure Switch/Gauges
NIST
it
The photohelic switch/gauges function in the
same manner, as versatile, precise pressure
switches combined with a pressure gauge utilizing
the time proven magnehelic design. Available
with 1 or 2 LED/phototransistor actuated relays.
Gauge reading is unaffected by switch operation.
Easy to adjust set points with knob controls.
Apply pressure and switch set points are fully visible. Deadband is 1 pointer width—less than 1%
full scale. DPDT relays can easily be interlocked
to provide variable deadband control. For positive,
negative or differential pressures as low as 0.25"
water column to 0 to 300 psi full scale; set points
as low as .01 w.c. on .25" scale unit.
H
698
it
$246.00
246.00
246.00
246.00
246.00
246.00
246.00
246.00
246.00
246.00
Adjustable Signal Flag
14.00
Bleed Fittings for Wet Gases
5.75
Forged Brass Case
92.00
(for applications involving water or water based liquids)
A471
Portability Kit Complete
308.00
(includes portable case, equalizer and
shut off manifold, and two ten foot lengths
of hose)
NISTPR132
NIST
SPECIFICATIONS
Ambient
Pressure Range
Catalog No.
Model
Description
Price
DW33931
DW339321
DW33934
DW33936
DW33939
DW33940
DW33948
NISTPR132
NISTPR133
3000-00
3001
3003
3005
3010
3015
3100
—
—
0 to .25" H2O .005 Divisions
0 to 1.0" H2O .02 Divisions
0 to 10" H2O .20 Divisions
0 to 15" H2O .50 Divisions
0 to 100" H2O 2.0 Divisions
$223.00
216.50
216.50
216.50
216.50
216.50
216.50
99.00
130.00
20°F to 120°F. Low temperature models available
as an option
Related Pressure
20" Hg to 25 psig total pressure on either side of
Photohelic
diaphragm. MP Model to 35 psig and HP Model to 80 psig
also available. Capsuhelic, 20 Hg to 500 psig
Accuracy
Photohelic, ± 2% of full scale at 70° (3% on “O" models,
4% on “OO” models. Capsuhelic, ± 3% of full scale at 70°
(2% on 4300 S models, 4% on 43215, 43220, 43500)
Gauge Connection Photohelic, 1⁄8" NPT. Capsuhelic, 1⁄4" NPT
Electrical Ratings 10 amps at 110 VAC, 60 Hz resistive
(Of relays)
6 amps at 240 VAC
Power Required
120 VAC, 50/60 Hz
Conduit Opening 3⁄4" conduit
www.davis.com
Differential Pressure Gauges
NIST
• Working pressure 6000P.S.I.G.
• Over-range protection to rated working
pressure
• Aluminum housing with 316 stainless
steel internals
2 Year
Model Number
Differential
Pressure Range
Accuracy
Dial Size
Working Pressure
Body Materials
Internal Materials
Mounting & Connections
Gauge Design
NIST %
Save 50
on 2nd year
recalibration
Differential Pressure Gauge
Model
WW238
WW242
WW243
WW249
WW255
WW260
WW263
NISTPR132
NISTPR133
120-AA-00-00
Aluminum
120-AA-00-00
Aluminum
120-AA-00-00
Aluminum
120-AA-00-00
Aluminum
120-SA-00-00
Stainless Steel
120-SA-00-00
Stainless Steel
120-SA-00-00
Stainless Steel
Material
Range
Price
0 to 10P.S.I.D.
0 to 30P.S.I.D.
0 to 50P.S.I.D.
0 to 1.6 bar
0 to 10P.S.I.D.
0 to 50P.S.I.D.
0 to 100P.S.I.D.
• Weather resistant construction standard
• Accuracy ± 5% full scale ascending.
(± 3 -2 -3% full scale)
• Shatter resistant lens
• 21⁄2" or 41⁄2" dial
SPECIFICATIONS
Ask about
Catalog No.
it
$105.00
105.00
105.00
105.00
204.00
204.00
204.00
99.00
130.00
Base Dimensions
Base Weight
Seal
Connections
Differential Pressure Gauges
120
0-10 PSID to 0-110 PSID
± 3-2-3% F.S.
2 1⁄2 " Round (STD.)
6,000PSIG
-40°F (-40°C) to + 200°F (+ 93°C)
Aluminum or 316S.S.
316 Stainless Steel
1
⁄4" FNPT Back Conn. (STD.)
Magnetically-Coupled
Piston-Type
3.3" x 1.97" x 4.25"
1.0 lbs
BUNA N (STD) Others available
upon request
1
⁄4" Back Connections (STD)
NIST
it
Ideally Suited for Use on Dissimilar Fluids, Wet Gas
or Fluids with a High Concentration of Solids.
SPECIFICATIONS
Differential Range
Accuracy
Dial Size
Working Pressure
Internal Materials
0-50" H2O to 0-100 PSID
± 3-2-3%F.S.
(1) 21⁄2" round (std.)
3000 PSIG-alum, 316SS
1500 PSIG-brass
316S.S. & elastomer
diaphragm
Cat. No. Model
Material
Range
WW272 141-AA-00-00
Aluminum 0-50 H20
WW273 141-AA-00-00
Aluminum 0-60 H20
WW274 141-AA-00-00
Aluminum 0-75 H20
WW275 141-AA-00-00
Aluminum 0-100 H20
WW277 141-AA-00-00
Aluminum 0-150 H20
WW279 141-AA-00-00
Aluminum 0-300 H20
WW280 141-AA-00-00
Aluminum 0-400 H20
WW281 141-AA-00-00
Aluminum 0-5P.S.I.D.
WW282 141-AA-00-00
WW284 141-AA-00-00
WW286 140-AA-00-00
WW287 140-AA-00-00
WW289 140-AA-00-00
WW290 140-AA-00-00
WW291 140-AA-00-00
Aluminum 0-1.0 bar
WW293 140-AA-00-00
Aluminum 0-2.5 bar
WW294 140-AA-00-00
Aluminum 0-4.0 bar
WW295 140-AA-00-00
Aluminum 0-6.0 bar
WW296 140-AA-00-00
Aluminum 0-7.0 bar
NISTPR132
NISTPR133
⁄4" FNPT back conn. (std.)
Magnetically-coupled
diaphragm-type
Dimensions/ Weight 3.3" x 2.75" x 5.41" / 2.75 lb
Seal
BUNA (std)
1
Connections
⁄4" FNPT back (std)
1
140 Differential Pressure Gauge/Brass Body
Price
$165.00
165.00
165.00
165.00
165.00
165.00
165.00
165.00
165.00
165.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
99.00
130.00
Cat. No. Model
Material
Range
WW297 141-BA-00-00
Brass
0-50 H20
WW298 141-BA-00-00
Brass
0-60 H20
WW299 141-BA-00-00
Brass
0-75 H20
WW300 141-BA-00-00
Brass
0-100 H20
WW302 141-BA-00-00
Brass
0-150 H20
WW304 141-BA-00-00
Brass
0-300 H20
WW305 141-BA-00-00
Brass
0-400 H20
WW306 141-BA-00-00
Brass
0-5P.S.I.D
WW307 141-BA-00-00
Brass
0-10P.S.I.D.
WW309 141-BA-00-00
Brass
0-20P.S.I.D.
WW311 140-BA-00-00
Brass
0-30P.S.I.D.
WW312 140-BA-00-00
Brass
0-50P.S.I.D.
WW314 140-BA-00-00
Brass
0-75P.S.I.D.
WW315 140-BA-00-00
Brass
0-100P.S.I.D.
WW316 140-BA-00-00
Brass
0-1.0 bar
WW318 140-BA-00-00
Brass
0-2.5 bar
WW319 140-BA-00-00
Brass
0-4.0 bar
WW320 140-BA-00-00
Brass
0-6.0 bar
WW321 140-BA-00-00
Brass
0-7.0 bar
NISTPR132
NISTPR133
H
140 Differential Pressure Gauge/316 Stainless Steel Body
Price
$220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
250.00
250.00
250.00
250.00
250.00
250.00
250.00
250.00
250.00
99.00
130.00
Cat. No. Model
Material
Range
WW322 141-SA-00-00
316 S.S.
0-50 H20
WW323 141-SA-00-00
316 S.S.
0-60 H20
WW324 141-SA-00-00
316 S.S.
0-75 H20
WW325 141-SA-00-00
316 S.S.
0-100 H20
WW327 141-SA-00-00
316 S.S.
0-150 H20
WW329 141-SA-00-00
316 S.S.
0-300 H20
WW330 141-SA-00-00
316 S.S.
0-400 H20
WW331 141-SA-00-00
316 S.S.
0-5P.S.I.D.
WW332 141-SA-00-00
316 S.S.
0-10P.S.I.D.
WW334 141-SA-00-00
316 S.S.
0-20P.S.I.D.
WW336 140-SA-00-00
316 S.S.
0-30P.S.I.D.
WW337 140-SA-00-00
316 S.S.
0-50P.S.I.D.
WW339 140-SA-00-00
316 S.S.
0-75P.S.I.D.
WW340 140-SA-00-00
316 S.S.
0-100P.S.I.D.
WW341 140-SA-00-00
316 S.S.
0-1.0 bar
WW343 140-SA-00-00
316 S.S.
0-2.5 bar
WW344 140-SA-00-00
316 S.S.
0-4.0 bar
WW345 140-SA-00-00
316 S.S.
0-6.0 bar
WW346 140-SA-00-00
316 S.S.
0-7.0 bar
NISTPR132
NISTPR133
Price
$305.00
305.00
305.00
305.00
305.00
305.00
305.00
305.00
305.00
305.00
355.00
355.00
355.00
355.00
355.00
355.00
355.00
355.00
355.00
99.00
130.00
www.davis.com
140 Differential Pressure Gauge/Aluminum Body
Connection
Gauge Design
699
Standard Duty Differential Test Kits
NIST
it
Rugged medium
accuracy portable
test kits. Popular applications are balancing heating & cooling
systems, checking
pump performance,
local flow indication,
checking equipment
for excessive pressure
drop, leakage.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Model 820
Model 831
Model 841
± 3-2-3%
± 3-2-3%F.S.
± 3-2-3 % Ascending
Ascending
Ascending
21⁄2"
41⁄2"
21⁄2"
500P.S.I.G. (34 bar) STD
300P.S.I.G. (20 Bar)
500P.S.I.G. (34 Bar)
Note: Pressure rating shown is limited by the hoses or by the gauge,
whichever is lower. Higher ratings are available as an option. (Contact factory for details)
Accuracy
Dial Size
Working Pressure
H
700
STANDARD MATERIALS OF CONSTRUCTION
Gauge
Valves
Tubing & Fittings
Hoses & End Ftgs
Case
Hose Length
Fitters
Temperature Limitations
Optional Features
Aluminum/316 S.S. Internals
Polysulfone/316SS Int'ls.
Alum/316SS Int'ls.
NONE
Soft-Seated Brass
NONE
Nylon & Brass
Neoprene Jacket and Liner. Schrader 1.4" Brass Coupler
Polypropylene
Polyethylene
Polypropylene
5Ft. (1.5 Meters)
10Ft. (3 Meters)
All Test Kits are protected with 90 Micron Brass Filters to minimize plugging with scale, sand, etc.
Filter elements can be cleaned or replaced
Maximum 150°F (66°C) Freezing temperatures must be avoided
A wide variety of materials, working pressures and fittings is available
Catalog No.
Model
Description
WW353
WW361
WW362
WW354
WW363
WW355
WW364
WW365
NISTPR132
NISTPR133
820
820
820
831
831
841
841
841
—
—
Test & Flow Measuring Kit Range 0-25 ft./H2O
Price
$335.00
335.00
335.00
640.00
640.00
390.00
390.00
390.00
99.00
130.00
www.davis.com
Precision Differential Pressure Test Kits
NIST
it
High quality portable test kits for precise flow indication, leak detection, balancing heating & cooling systems, checking pump performance,
and checking calibration of transmitters, etc.
SPECIFICATIONS
Temperature Limitations
Optional Features
± 1% Full Scale-Standard
4 1⁄2 "-Standard
NOTE: Pressure rating shown is limited by the hoses. Higher ratings are available as an option. Please inquire.
Catalog No.
Model
Description
WW347
WW348
WW349
WW351
WW357
NISTPR132
NISTPR133
805
805
805
805
805
—
—
Test & Flow Measuring Kit Range 0-25 in./H2O
H
Aluminum Capsule/Brass Internals
Soft-Seated Brass
Nylon & Brass
Neoprene Jacket and Liner. Schrader 1.4" Brass Coupler
Polyethylene
10Ft. (3 Meters)
All Test Kits are protected with 90 Micron Brass Filters to minimize plugging with scale, sand, etc.
Filter elements can be cleaned or replaced
Maximum 150°F (66°C) Freezing temperatures must be avoided
A wide variety of materials, working pressures and fittings are available, Please inquire
Price
$1,450.00
1,205.00
1,205.00
1,205.00
1,205.00
99.00
130.00
www.davis.com
Model 805
Accuracy
Dial Size
Working Pressure
STANDARD MATERIALS OF CONSTRUCTION
Gauge
Valves
Tubing & Fittings
Hoses & End Ftgs.
Case
Hose Length
Filters
701
Low Pressure and Commercial Pressure Gauges
NIST
it
Model 1005 Features
• Case material is black painted
steel
• These gauges utilize a heat
resistant push-in polycarbonate
window
• Dial faces match other commercial
gauges for easy readability
• Patented PowerFlex with polyester
segment movement
• Optional back mount available
Model 1490 Features
• 2 1⁄2" and 3 1⁄2" dial size
• Glass-filled polysulfone case
material
• Beryllium copper diaphragm
• Brass socket
• Wetted materials of beryllium
copper, brass, polysulfone and
RTV silicone
• Optional back mount available
Model
1490
MODEL 1490 SPECIFICATIONS
Accuracy
Dial Size
Connection
± 2-1-2% full scale
21⁄2"
Standard: 1⁄4" NPT lower mount
or 1⁄8 NPT Male
Optional: 1⁄4" NPT back mount
Case
Glass-filled Polysulfone
Window
Polycarbonate
Bourdon Tube
Beryllium copper
diaphragm
Socket
Brass
Low Pressure Gauge
Catalog No.
H
702
AS1461
AS1462
AS1463
AS1464
Model 1490 2 1⁄2" Dial
Range
0 to 10 oz./sq. in.
0 to 15 oz./sq. in.
0 to 20 oz./sq. in.
0 to 30 oz./sq. in.
Price
$36.40
36.40
36.40
36.40
15" to 0 H2O
30" to 0 H2O
0 to 60" H2O
1 to 100" H2O
0 to 200" H2O
40.90
40.90
40.90
40.90
40.90
0 to 10" H2O
0 to 30" H2O
0 to 60" H2O
0 to 100" H2O
0 to 200" H2O
0 to 300" H2O
36.40
36.40
36.40
36.40
36.40
36.40
PSI
AS1496
AS1497
AS1498
0 to 3 PSI
0 to 5 PSI
0 to 10 PSI
36.40
36.40
36.40
Compound
AS1499
AS1500
NISTPR68
NISTPR69
Accuracy
Dial Size
Connection
± 3 - 2 - 3% full scale
21⁄2"
1
Standard::
1
Optional
⁄4" NPT back mount
Black painted steel
Polycarbonate push-in
Bronze (VAC 600psi and compound)
Helical bronze (1000 to 6000psi)
Brass
Case
Window
Bourdon Tube
Socket
Model 1005 2 1⁄2" Dial
Catalog No.
Range
AS105200
AS105201
AS105202
AS105203
AS105204
AS105205
AS105206
AS105207
AS105208
15 PSI
30 PSI
60 PSI
100 PSI
160 PSI
200 PSI
300 PSI
400 PSI
600 PSI
Price
$19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
Vacuum
AS105209
Inches H2O
AS1490
AS1491
AS1492
AS1493
AS1494
AS1495
Commercial Pressure Gauge
Vacuum
AS1465
AS1466
AS1467
AS1468
AS1469
Model
1005
30" HG VAC
20.20
AS105210
30" HG/0/15 PSI
20.20
AS105211
30" HG/0/60 PSI
20.20
AS105212
30" HG/0/100 PSI
20.20
AS105213
30" HG/0/300 PSI
20.20
NISTPR5
NISTPR6
Compound
85.00
130.00
Ask about
10"/0/10"H2O
30"/0/30"H2O
Standard metric ranges available, kPa and cm H2O
40.90
40.90
85.00
130.00
2 Year
NIST
Save 50%
on 2nd year
recalibration
www.davis.com
Dry & Liquid Filled Stainless Steel Pressure Gauges
NIST
it
Model 1009 Features
• Welded stainless steel socket
and tube
• Overload and underload
stops
• Adjustable pointer
• 5-year warranty
Model 1008 Features
• Welded stainless steel socket
and tube design
• Soldered brass socket and
bronze tube design
• Economical corrosion resistant
stainless steel case
• Dual scale dial in psi
and kPa
• 1-year warranty
MODEL 1009 SPECIFICATIONS (DRY) (Liquid filled optional)
MODEL 1008 SPECIFICATIONS (LIQUID FILLED) (Dry optional)
Accuracy
Dial Sizes
Connection
Accuracy
Dial Sizes
Connection
Standard:
Optional:
Bourdon Tube and
Socket Material
Window
± 3 - 2 - 3% full scale
21⁄2"and 4" Stainless Steel
Standard: 1⁄4" NPT lower mount
Optional: 1⁄4" back mount, and 1⁄2" NPT on 4" L.M.
Bourdon Tube and AISI 316 stainless steel
Socket Material
Optional : Bronze tube Brass socket
Window
Polycarbonate
1% full scale grade A1
21⁄2" and 31⁄2"stainless steel
1
1
⁄4" NPT center back
AISI 316 stainless steel
Optional: bronze tube, brass socket
Polycarbonate
2 1⁄2" Dial
Model 1009
Catalog No.
0-15psi
0-30psi
0-100psi
0-200psi
0-400psi
0-1000psi
0-5000psi
0-10,000psi
Vacuum
Compound
AS109201
AS109202
AS109203
AS109204
AS109205
AS109207
AS109209
AS109210
AS109211
AS109212
AS109213
30"HG to 0
30"HG to 0-15psi
30"HG to 0-100psi
Model 1008
Dual Range
0-15psi, 100Kpa
0-60psi, 400Kpa
0-100psi, 700Kpa
0-200psi, 1400Kpa
0-400psi, 2800Kpa
30"HG to 0 Vacuum
30"HG to 0-15psi Compound
30"HG to 0-100psi Compound
NISTPR5
NISTPR6
Price
$77.80
77.80
74.40
74.40
74.40
74.40
82.60
82.60
77.80
77.80
77.80
21⁄2" Dial Liquid Filled
AS108301
AS108302
AS108303
AS108304
AS108305
AS108307
AS108308
AS108309
56.30
53.80
53.80
53.80
53.80
56.30
56.30
56.30
Catalog No.
Price
AS109215
AS109216
AS109217
AS109218
—
—
AS109223
AS109224
AS109225
—
—
$89.70
89.70
85.80
85.80
H
89.70
4" Dial (100mm) Liquid Filled
AS92103
AS92105
—
AS92107
—
AS92120
AS92121
AS92102
108.00
102.00
102.00
108.00
108.00
108.00
85.00
130.00
www.davis.com
Range
31⁄2" Dial
703
Low Pressure Bellows Gauge
NIST
STANDARD RANGES
1188 Grade A (2-1-2% F.S.)
Double Arc
Dial Graduations
Inner Scale
Outer Scale
Pressure Range
Inner
Scale
2 Year
NIST
Save 50%
on 2nd year
recalibration
H
704
Considerations for Selecting Low Pressure
Bellows Type Gauges Include:
Process Media: The 1188 series of pressure
gauges are available with bronze, 316 stainless
steel and Monel bellows materials. Socket materials include brass, 316 stainless steel and
Monel.
Pressure Gauge Range: These gauges are
offered with ranges from 10 inches of water vacuum thru 10 psi including compound ranges.
Operating Environment: Depending on the
model number, these gauges are available with
an aluminum or phenolic case.
Accuracy Requirements: These gauges are
offered with a 2-1-2% ASME Grade A accurracy.
Dial Size: Available in 41⁄2˝ thru 81⁄2˝ dial sizes
depending on the type number.
Connections: 1⁄4 or 1⁄2 NPT lower or back connections are available depending on the type
number. JIS, BSP, DIN and SAE connections are
also available.
Mounting Requirements: Stem, surface or
flush mounting, depending on the type number.
Outer
Scale
in.H20
oz/in2
0/10
0/60
0/15
0/90
0/20
0/12
0/30
0/18
0/40
0/24
0/60
0/35
0/80
0/45
0/100
0/57
0/150
0/90
psi
in./Hg
0/5
0/10
0/8
0/16
0/10
0/20
Vacuum
mm/Hg
in.H20
10/0
18/0
15/0
28/0
20/0
37/0
30/0
56/0
40/0
75/0
60/0
110/0
80/0
150/0
100/0
180/0
150/0
270/0
in.Hg
ft H/20
10/0
11/0
15/0
17/0
20/0
23/0
Ask about
With ranges as low as 10 inches of
water vacuum, a variety of wetted
parts and case materials and solid
front case designs, these low pressure
gauges are generally used on applications measuring air, liquid or gas.
it
Range
Dial Arc
(degrees)
Figure
Interval
Minor
Graduation
Figure
Interval
Minor
Compound
Graduation (Vac./Pres.)
180
180
180
216
270
270
270
270
270
1
3
2
5
5
5
10
10
25
0.5
0.5
1
1
1
1
1
1
1
1
1
1
1
3
5
5
5
10
0.25
0.25
0.25
0.5
0.5
1
1
1
2
270
270
270
1
1
1
0.25
0.25
0.25
1
2
2
0.5
0.5
0.5
180
180
180
216
270
270
270
270
270
1
3
2
5
5
5
10
10
25
0.5
0.5
1
1
1
1
1
1
1
5
3
5
5
10
10
20
20
20
1
1
1
1
2
2
5
5
5
270
270
270
1
1
2
0.5
0.5
0.5
1
2
2
5
5
1
in.H20
5/0/5
10/0/10
30/0/10
20/0/20
40/0/20
10/0/30
30/0/30
70/0/30
20/0/40
50/0/50
in./Hg/psi
5/0/3
2/0/5
5/0/5
10/0/50
Dial Graduations
Dial Arc
(degrees)
180
180
270
270
270
270
270
270
270
270
270
270
270
270
Figure
Interval
Minor
Graduation
in.H20
1
2
5
5
5
5
10
10
10
10
in.Hg psi
1 1
1 1
1 1
2 1
0.2
0.5
1
0.5
1
1
1
1
1
1
in.Hg psi
0.2 0.1
0.1 0.1
0.2 0.1
0.2 0.1
TABLE A – CASE SELECTION AND MOUNTING
Dial(1)
Size
(inches)
Order
Code
Case
Type
Case: Material
Finish
Ring: Material
Finish
Style
Mounting
Connection
41⁄2˝
(45)
1188
Phenolic
Black
Threaded
Polypropylene
Stem
Surface
Flush
Lower or Back
Lower or Back
Back, order 1278M
Mounting Ring X56
TABLE B – BELLOWS SYSTEM/RANGE SELECTION(1)
Order
Code
Bellows
& Socket
Pressure
Range
Material
Vacuum
Range
Compound
Range
NPT
Conn.(2)
Available
Case Size
and Type
A
Brass
10˝ H2O to 10 psi
10˝ H2O to
20˝ mercury
5˝ H2O vac. & 5˝
H2O press. to 10˝
mercury vac. & 5 psi
1⁄4
41⁄2˝, 6˝, 81⁄2˝ 1187
41⁄2˝ 1188
41⁄2˝, 6˝, 81⁄2˝ 1189
S
316SS
10˝ H2O to 10 psi
10˝ H2O to
20˝ mercury
5˝ H2O vac. & 5˝
H2O press. to 10˝
1⁄4
41⁄2˝, 6˝, 81⁄2˝ 1187
41⁄2˝, 1188
41⁄2˝, 6˝, 81⁄2˝ 1189
P
Monel
10˝ H2O to 10 psi
10˝ H2O to
20˝ mercury
5˝ H2O vac. & 5˝
H2O press. to 10˝
1⁄4
41⁄2˝, 6˝, 81⁄2˝ 1187
41⁄2˝ 1188
41⁄2˝, 6˝, 81⁄2˝ 1189
(1) For selection of the correct bellows system material, please inquire for the media application table.
(2) Optional connection 1⁄2 NPT.
(3) Others ranges available: Consult factory.
TO ORDER THE 1188 LOW PRESSURE BELLOWS GAUGES CONFIGURE BELOW AND CALL FOR PRICING:
Select:
1.
2.
3.
4.
5.
6.
7.
45
1188
AS
02L
XXX
10 psi
Dial size–41⁄2˝
Case type–1187
Tube and socket material/solid front
Connection size–1⁄4 (02)
Connection location–Lower (L) , Back (B)
Optional features
Standard pressure range –10 psi
www.davis.com
Industrial Pressure Gauge 4 1⁄2" Dial
NIST
it
The Duragauge® Pressure Gauge
is the finest production gauge on the
market for industrial use where a
precise indications are required. The
line offers a wide variety of case
styles, Bourdon tubes, and pressure
ranges to meet any conceivable application.
The solid front phenolic case
gauge is truly an industry first.
Offered in 41⁄2" size only, weatherproof, hermetically sealed or liquid
filled versions. Molded threads at
the front and rear of the case provide axial seals with the use of
threaded rings.
• Weather-proof construction
• Pressure relief back
• Standard stainless steel rotary geared
Teflon® movement
• Easily adjustable, self locking micrometer pointer
SPECIFICATIONS
Accuracy
Dial
Size
Connection
Bourdon
Tube
Material
Case
Ring
Model
AS1200401
AS1200402
AS1200403
AS1200404
AS1200405
AS1200406
AS1200407
AS1200408
AS1200409
AS1200410
AS1200411
AS1200412
AS1200413
AS1200416
AS1200417
AS1200418
AS1200419
1279
0 to 15 psi
0.1
1279
0 to 30 psi
0.2
1279
0 to 60 psi
0.5
1279
0 to 100 psi
1
1279
0 to 160 psi
1
1279
0 to 200 psi
2
1279
0 to 300 psi
2
1279
0 to 400 psi
5
1279
0 to 600 psi
5
1279
0 to 800 psi
10
1279
0 to 1000 psi
10
1279
0 to 2000 psi
20
1279
0 to 5000 psi
50
1279
0 to 30"Hg VAC
0.2
1279
30"Hg to 15 psi
0.2-0
1279
30"Hg to 60 psi
0.2-0.5
1279
30"Hg to 100 psi
0.2-1
Available in metric scales, in Kg/cm2, bar, or KPa
NISTPR5
NISTPR6
Price
$119.00
119.00
114.00
114.00
114.00
114.00
114.00
114.00
114.00
114.00
114.00
223.00
223.00
119.00
119.00
119.00
119.00
85.00
130.00
www.davis.com
H
Socket
Material
Grade 2A ± 0.5% full scale
Type 1279
41⁄2" (only)
1
⁄2" NPT lower mount standard
optional 1⁄4" NPT available
VAC-1000PSI Grade A
Phosphor bronze,
2000-20,000psi
VAC-1000psi brass;
2000-20,000psi
Phenol black
Threaded reinforced
polypropylene
Range
Minor
Graduations
Catalog No.
705
3" Pocket Test Gauges
NIST
it
• Stainless steel construction
• Zero adjustable Mylar/aluminum composite dial with
polished mirror band
• ± 0.5% accuracy, ASME
B40.1 Grade 2A
• 12 pressure and vacuum
ranges
• Black, adjustable pointer with
red-painted knife-edge tip
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
The Pocket Test Gauge is durable, transportable
and easy to read. The case, ring, bourbon tube,
socket and movement are constructed entirely of
stainless steel. The precision stainless steel movement, bearings and pinion are coated with Teflon
“S” for reduced friction and wear.
The new white dial can be read easily and quickly. Each gauge has a black pointer with a red painted knife-edge tip. Reading error, caused by parallax, is eliminated by aligning the knife-edge tip
Type 1084
H
706
pointer with its reflection in the mirror band on the
dial.
As a standard feature, the pocket test gauge will
be supplied in an attractive cushioned Nylon fabric
pouch with carrying strap.
Also available is a stainless steel cover that fits
securely over the window and protects the gauge
from damage while being carried in a tool box or
pocket.
SPECIFICATIONS
Graduations
Catalog
No.
Pressure
Range (psi)
Figure
Interval
Minor
Graduations
Interval
AS10841
AS10842
AS10843
AS10844
AS10845
AS10846
AS10847
AS10848
AS10849
AS10851
0/15
0/30
0/60
0/100
0/150
0/200
0/300
0/400
0/600
0/1000
1
2
5
10
10
20
20
50
50
100
0.1
0.2
0.5
0.5
1
1
2
2
5
5
Accuracy %/Grade
Price
$136.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
Options
Catalog No.
Model
Description
AS10852
NISTPR5
NISTPR6
3020198-01
—
—
Polished Stainless Steel Protective Cover
13.40
85.00
130.00
Dial Size
Tube and Socket
Material
Case Material
Movement
Mounting and
Connection
Location
Ranges
± 0.5/ASME B40.1
Grade 2A
3"
316 Stainless Steel
Welded
Polished Stainless
Steel, Open front
Precision, stainless
steel with Teflon. “S”
coated bearings and
pinion
1
⁄4 " NPT, lower only
Vacuum through
1000psi
Ring
Bayonet Cam-Lock
Polished St. St
Window
Polycarbonate
Pointer
Black aluminum with
red-painted knife-edge
tip
Dial
Zero adjustable,
Mylar/aluminum composite, white background,
black numerals with polished mirror band
Optional polished stainless steel protective
cover available. See ordering information
www.davis.com
Liquid Filled Hydraulic Pressure Gauges
NIST
2 1⁄2" Model 3000 Stainless Steel
Range
Catalog No.
0-15psi
0-30psi
0-60psi
0-100psi
0-200psi
0-600psi
0-1000psi
0-2000psi
0-4000psi
0-5000psi
0-6000psi
Vacuum 30"Hg-0
NISTPR5
NISTPR6
SPECIFICATIONS
Accuracy
Dial Size
Connection
Socket
Liquid
Window
Case
3005HL
3005PHL
3005HL
3005PHL
it
Price
AS300401
AS300402
AS300403
AS300404
AS300405
AS300408
AS300409
AS300410
AS300411
AS300412
AS300413
AS300417
$42.00
42.00
42.00
42.00
42.00
42.00
48.00
48.00
48.00
48.00
48.00
43.00
85.00
130.00
± 3 - 2 - 3% full scale
21⁄2"
1
⁄4" NPT Lower mount, (Optional back mount)
Brass, with O-ring case seal
Glycerin 0°-150°F
Glass
Acrylic
Stainless steel with vent plug
ABS case with vent plug
Standard Pressure Gauges
NIST
it
Our Standard Pressure Gauges are designed for
long and reliable service under rugged conditions.
Some typical applications are for pumps, hydraulic
and pneumatic systems, compressors, and many more
applications where liquid and gases do not corrode
brass. The accuracy of the gauges is 1.5% of full scale
in all sizes and they are available from 30 psi to 5000
psi. Vacuum ranges and compound ranges are
available upon request.
Accuracy
Case
Bourdon Tube
Window
Movement
Temperature Range
Duty Range
⁄5% of full scale
Black drawn steel case
Copper alloy, coiled safety bourdon tube for
800 psi and higher
Acrylic, snap in
Brass with bearing surfaces highly finished
Ambient 10° to 150°F
A gauge range of twice the working pressure is
generally selected. Working pressure
should be limited to 75% of gauge range
1
Range
Size
Connection
Acc. Conn. Price
Size
0 to 30 psi 1.5"-111.10 Center Back Mount 1.5% 1⁄8" $19.00
0 to 60 psi 1.5"-111.10 Center Back Mount 1.5% 1⁄8" 19.00
0 to 30 psi 2"-111.10
Center Back Mount 1.5% 1⁄4" 19.00
0 to 60 psi 2"-111.10
0 to 100 psi 2"-111.10
0 to 160 psi 2"-111.10
0 to 30 psi 2.5"-111.10 Lower Mount
1.5% 1⁄4" 20.40
1.5% 1⁄4" 20.40
1.5% 1⁄4" 20.40
1.5% 1⁄4" 20.40
1.5% 1⁄4" 20.75
1.5% 1⁄4" 20.40
85.00
130.00
(Please allow 4 weeks for delivery on center back mount gauges)
www.davis.com
SPECIFICATIONS
Catalog
No.
WK333134
WK333135
WK333136
WK333137
WK333138
WK333139
WK333140
WK333141
WK333142
WK333144
WK333145
WK333146
WK333147
WK333148
WK333149
NISTPR5
NISTPR6
H
707
Industrial Stainless Steel Gauges
NIST
it
Type 232.54 gauge features 316 stainless steel
wetted parts and 304 stainless steel case and bayonet ring, an adjustable pointer, a laminated safety glass window, and can be liquid-filled in the
field (233.54).
WIKA stainless steel gauges are ideal for
process, chemical, and petrochemical applications,
oil exploration and production, power generation,
pollution control equipment, and any other application requiring fine quality, long lasting pressure
measurement instrumentation.
SPECIFICATIONS
Sizes
Case
Bayonet Ring
Wetted Parts
Window
Dial
Pointer
O-ring
Accuracy
H
708
Catalog No.
Ramge
Connection*
WK9744827
30” Hg
Lower Mount
WK9744894
0 - 15 psi
Lower Mount
WK9744908
0 - 30 psi
Lower Mount
WK9744916
0 - 60 psi
Lower Mount
WK9744924
0 - 100 psi
Lower Mount
WK9744932
0 - 160 psi
Lower Mount
WK9744940
0 - 200 psi
Lower Mount
WK9744959
0 - 300 psi
Lower Mount
WK9744967
0 - 400 psi
Lower Mount
WK9744975
0 - 600 psi
Lower Mount
WK9744991
0 – 1000 psi
Lower Mount
WK9745009
0 – 1500 psi
Lower Mount
WK9745017
0 – 2000 psi
Lower Mount
WK9745025
0 – 3000 psi
Lower Mount
WK9745033
0 – 5000 psi
Lower Mount
WK9745041
0 – 10000 psi
Lower Mount
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
* Center Back Mount Connection Available
** 4” Dial Size Available
2 1/2” (63 mm), 4” (100 mm)
304 SS
Polished SS
316 SS
Safety glass
White aluminum
Black, adjustable
EPDM (4” only)
± 1.5% of span (2 1/2”),
± 1.0% of span (4”)
ASME B40.1 Grade 1A
Connection Size
Dial Size
Price
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
$56.15
53.43
53.43
53.43
53.43
53.43
53.43
53.43
53.43
53.43
53.43
58.42
58.42
58.42
58.42
58.42
85.00
130.00
85.00
130.00
www.davis.com
Industrial Stainless Steel Gauges
NIST
it
WIKA Type 213.53 gauges feature a stainless steel case for protection in harsh environments. These gauges are supplied standard
with a glycerine filled case.
SPECIFICATIONS
Size
Case
Ring
Wetted Parts
Window
Dial
Pointer
Filling
O-ring
Accuracy
2 1/2” (63 mm)
Stainless steel
Polished SS, crimped
Copper alloy
Polycarbonate (2 1/2”), Acrylic (4”)
ABS
Black aluminum
Glycerine
EPDM
+ 1.5% of span
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Range
Connection*
Connection Size
Dial SIze**
Price
WK9767002
WK9767037
WK9767045
WK9767053
WK9767061
WK9767070
WK9767088
WK9767096
WK9767100
WK9767118
WK9767126
WK9767134
WK9767142
WK9767150
WK9767169
WK9767177
30 “Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
0 – 1000 psi
0 – 1500 psi
0 – 2000 psi
0 – 3000 psi
0 – 5000 psi
0 – 10000 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
2.5”
2.5”
2.5”
2.5"
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
28.37
27.32
27.32
27.32
27.32
27.32
27.32
27.32
27.32
27.32
27.32
30.25
30.25
30.25
30.25
39.29
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
* Center Back Mount Connection Available
** 4” Dial Size Available
85.00
130.00
85.00
130.00
www.davis.com
H
Catalog No.
709
Contractor Gauges
NIST
it
WIKA Type 111.25 4 1/2” gauges are specifically
designed for the HVAC market as a contractor’s
gauge. This gauge features a stainless steel case
and bayonet ring, brass wetted parts, and an adjustable pointer. The standard accuracy is ± 1.0%
of span with both single scale and dual scale
PSI/KPA.
SPECIFICATIONS
Size
Wetted Parts
Case
Window
Dial
Pointer
Accuracy
H
710
4 1/2” (115 mm)
Copper alloy
Stainless steel, matte finish
Snap-in acrylic
White aluminum
Black aluminum, adjustable
± 1% of span
Catalog No.
Range
Connection
Connection Size
Price
WK4277750
WK4277768
WK4277776
WK4277784
WK4277792
WK4277806
WK4277814
WK4277822
WK4277831
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
$41.45
41.45
41.45
41.45
41.45
41.45
41.45
41.45
41.45
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
85.00
130.00
127.00
195.00
www.davis.com
Commercial Gauges
NIST
it
SPECIFICATIONS
Size
Wetted Parts
Case
Window
Dial
Pointer
Accuracy
2” (50 mm)
Copper alloy
Black ABS
Snap-in acrylic
White ABS
Black ABS
± 3% of span
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Range
Connection
Connection Size
Price
WK4252901
WK4252919
WK4252927
WK4252935
WK4252943
WK4252951
WK4252960
WK4252978
WK4252986
WK4252994
30” Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
$21.54
18.65
18.65
18.65
18.65
18.65
18.65
18.65
18.65
18.65
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
85.00
130.00
127.00
195.00
www.davis.com
H
Catalog No.
711
Low Pressure Gauges
NIST
it
WIKA Type 611.10 low pressure gauges are extremely sensitive and highly accurate. The copper
alloy capsule is designed to measure pressure and
vacuum of gaseous media from as low as 15”H2O
to 240” H2O (10 psi). An adjustment screw is located on the dial to re-zero the pointer if necessary. The finely polished nickel silver pinion gear
and shaft of the movement ensure repeatable
accuracy.
SPECIFICATIONS
Size
Case
Wetted Parts
Window
Dial
Pointer
Accuracy
H
712
Catalog No.
Range
WK9852344
WK9748321
WK9747473
WK9851682
WK9851690
WK9851704
WK9851810
WK9851828
WK9851771
WK9851780
WK9851798
WK9851747
WK9851801
WK9851755
WK9851720
WK9851739
0-30 “H2O/mm H2O vacuum
0-15 “H2O/mm H2O Pressure
0-10oz./sq. in./mm H2O Pressure
2 1/2” (63mm)
Black painted steel
Copper alloy
Acrylic
White aluminum
Black aluminum
+ 1.5% of span
Connect
Connection Size
Dial Size
Price
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
$38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
38.45
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
* 4” Dial Size Available (612.20)
85.00
130.00
127.00
195.00
www.davis.com
Precision 4” Test Gauges
NIST
it
WIKA Type 332.54 inspector’s
test gauges are convenient for field
calibrations. They have an accuracy of ±0.25% which meets ASME
B40.1 Grade 3A. The mirrored
band on the dial and the knife-edge
pointer make it easy to take accurate readings from the gauge. Type
332.54 test gauges are supplied
standard with a zippered, nylon
carrying pouch.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
4” (100 mm)
304 SS
Polished SS
316 SS
Safety glass
White aluminum with mirrored band
Black, adjustable
EPDM
± 0.25% of span (ASME B40.1 Grade 3A)
Ranges 0/30” Hg Vac through 0/600 psi
0.25% of span (ASME B40.1 Grade 3A)
Ranges 0/2000 psi through 0/20,000 psi
0.25% of span (ASME B40.1 Grade 3A)
Catalog No.
Range
Connection
Connection Size
WK4220013
WK4220021
WK4220030
WK4220048
WK4220056
WK4220064
WK4220072
WK4220081
WK4220099
WK4220102
30” Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
Price
$149.36
149.36
149.36
149.36
149.36
149.36
149.36
149.36
149.36
149.36
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
85.00
130.00
127.00
195.00
www.davis.com
H
Size
Case
Bayonet Ring
Wetted Parts
Window
Dial
Pointer
O-ring
Accuracy
713
NIST
it
Extremely sensitive and highly accurate, WIKA Type 312.20 test
gauges are excellent for instrument
shops, gauge repair and calibration
shops, testing laboratories and other
applications demanding high precision and consistent results. Type
312.20 test gauges feature adjustable
knife-edge pointers and mirror bands
on the dial to assure precise readings
and to eliminate parallax error.
Inside, a low-friction, wear resistant
movement made of nickel-silver
(Type 312.20) delivers a long service
life, and consistent levels of accuracy.
SPECIFICATIONS
Size
Case
Bayonet Ring
Wetted Parts
Movement
Window
Dial
Pointer
Accuracy
H
714
Catalog No.
WK9746859
WK9746867
WK9746875
WK9746884
WK9746892
WK9746905
WK9746914
WK9746922
WK9746930
WK9746948
WK9746965
WK9746973
WK9746981
WK9746999
WK9747006
WK9747015
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
6” (160 mm)
Stainless steel
Stainless steel
Copper alloy
Brass with nickel-silver pinion gears and shaft
Laminated safety glass
White aluminum with mirrored band
Black aluminum, knife-edge
± 0.25% of span
ASME B40.1 Grade 3A
Range
Connection
Connection Size
30” Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
0 – 1000 psi
0 – 1500 psi
0 – 2000 psi
0 – 3000 psi
0 – 5000 psi
0 – 10000 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
Price
$471.51
352.58
352.58
352.58
352.58
352.58
352.58
352.58
352.58
352.58
352.58
401.48
401.48
401.48
401.48
401.48
85.00
130.00
127.00
195.00
Note: 1/2" NPT Connections Available
www.davis.com
Process Gauges
NIST
it
Specifically designed for the chemical
and petroleum processing industries,
WIKA process gauges have the construction, materials, and engineering it takes
to stand up to the toughest conditions
around. The 212.34 gauges are equipped
with brass-wetted parts. It is engineered
to deliver years of accurate service while
withstanding vibration and a wide range
of temperatures.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Size
Case & Ring
Window
Dial
Pointer
Accuracy
4 1/2” (115 mm)
Fiberglass reinforced thermoplastic, black
Acrylic
White aluminum
Aluminum, adjustable
± 0.5% of span
ASME B40.1 Grade 2A
Range
Connection
Connection Size
Price
WK9834036
WK9834117
WK9834125
WK9834133
WK9834141
WK9834150
WK9834168
WK9834176
WK9834184
WK9834192
WK9834206
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
30” Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
0 – 1000 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
$74.33
74.33
74.33
74.33
74.33
74.33
74.33
74.33
74.33
74.33
74.33
85.00
130.00
127.00
195.00
www.davis.com
H
Catalog No.
715
4 1⁄2" Process Gauges
NIST
it
Specifically designed for the chemical
and petroleum processing industries,
WIKA process gauges have the construction, materials, and engineering it takes to
stand up to the toughest conditions around.
The 232.34 gauges are equipped with stainless steel wetted parts. It is engineered to
deliver years of accurate service while withstanding vibration, corrosive media and
corrosive environments, and a wide range
of temperatures. The WIKA Type 232.34 6”
process gauge provides excellent visibility
with a 6” dial.
SPECIFICATIONS
Size
Case & Ring
Window
Dial
Pointer
Accuracy
H
716
4 1/2”
Fiberglass reinforced thermoplastic, black
Acrylic
White aluminum
Aluminum, adjustable
± 0.5% of span
ASME B40.1 Grade 2A
Catalog No.
Range
Connection
Connection Size
Dial Size
Price
WK9834729
WK9834800
WK9834818
WK9834826
WK9834834
WK9834842
WK9834850
WK9834869
WK9834877
WK9834885
WK9834893
WK9834907
WK9834915
WK9834923
WK9834931
WK9834940
30” Hg
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 300 psi
0 - 400 psi
0 - 600 psi
0 – 1000 psi
0 – 1500 psi
0 – 2000 psi
0 – 3000 psi
0 – 5000 psi
0 – 10000 psi
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
Lower Mount
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
1/2” NPT
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
4.5”
$84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
84.58
Accessories
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
* Lower Back Mount Connections Available
85.00
130.00
127.00
195.00
www.davis.com
Weatherproof Pressure Gauges 4 1⁄2" & 6" Dials
NIST
it
Designed for flush mounting, this solid front
gauge is ideal for panel board applications. Its
black epoxy coating and its tough aluminum
weatherproof case easily allows application in a
variety of climatic conditions.
• ± 0.5% full scale accuracy
• Weatherproof case
• Standard stainless steel rotary
geared movement
• Easily adjustable, self locking
micrometer pointer
• 100 standard psi and metric ranges,
5 standard systems
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Model 1377
SPECIFICATIONS
Accuracy
Dial
Connection
Grade 2A ± 0.5% full scale
41⁄2" and 6” diameters
1
⁄4" NPT male back connection (standard)
Optional 1⁄2" NPT male back connection
Vacuum 1000psi Grade A phosphor bronze
2000-20,000psi (316 stainless steel available)
Vacuum through 1000psi brass, 1000-20,000psi
(316 stainless steel available)
Solid front aluminum black epoxy coated
Hinged steel black enamel coated
Bourdon Tube
Material
Socket
Material
Case
Ring
4 1⁄2"
Range
Minor Graduation
6"
Catalog No.
Price
Catalog No.
Price
AS137901
AS137902
AS137903
AS137904
AS137905
AS137906
AS137908
AS137910
AS137911
$149.00
149.00
144.00
144.00
144.00
144.00
144.00
242.00
242.00
AS137921
AS137922
AS137923
AS137924
AS137925
AS137926
AS137928
AS137930
AS137931
$240.00
240.00
231.00
231.00
231.00
231.00
231.00
349.00
349.00
AS137914
149.00
AS137934
Scales available in metric indication; Kpa, Bar, Kg/cm2
240.00
85.00
130.00
Dial Sizes
Pressure: PSI
0—15
0—30
0—60
0—100
0—200
0—400
0—800
0—2000
0—5000
0.1
0.2
0.5
1
1
5
10
20
50
Vacuum
30"Hg to 0
NISTPR5
NISTPR6
0.2
H
www.davis.com
717
Precision Test Gauge ±0.25% Accuracy
This new generation of test gauges to meet the exacting
needs of instrument engineers and quality specialists. The
new Ashcroft® test gauge can be used as a transfer standard
for periodically checking the accuracy of pressure instru-
NIST
it
ments or as a laboratory instrument for research and test
labs. The wealth of new features makes it an excellent test
gauge for process applications where high accuracy in pressure measurement is essential.
• Precision accuracy ± 0.25% full scale, ASME Grade 3A
• Temperature compensated—reduces ambient temperature errors
to less than 0.005% per °F
• External micro-span adjustment for ease in span calibration from
0-100% of scale
• Hydraulically staked movement with Teflon® coated gears and
bearings improves stability
• Precision dial and pointer results in excellent readability
Accuracy %/Grade
Dial Size
Standard Bourdon
Tube Material
Socket Material
Window
Case
Material
Aluminum
Dial
Standard 1⁄4"
Lower Mount
Connection
4 1⁄2"
Dial Sizes
Range
H
718
Catalog No.
Price
± 0.25%/ANSI B 40.1, Grade 3A
41⁄2", 6", 81⁄2"
Vac thru 400psi: phosphor bronze
Vac to 10,000psi: K-Monel
Vac to 400psi: brass
Vac to 10,000psi: Monel 400
Glass
Aluminum, solid front, black epoxy coated
White coated, black numerals
with polished mirror band
Optional back connection available
8 1⁄2"
6"
Minor
Graduation
Catalog No.
Price
Minor
Graduation
Catalog No.
Price
Minor
Graduation
Pressure PSI
0-15
0-30
0-60
0-100
0-200
0-400
0-600
0-1000
0-2000
0-5000
0-10,000
AS800240
AS800241
AS800242
AS800243
AS800244
AS800245
AS800246
AS800248
AS800249
AS800250
AS800251
$226.00
226.00
226.00
226.00
226.00
226.00
317.00
317.00
317.00
317.00
317.00
0.05
0.1
0.2
0.5
0.5
1
2
5
10
20
50
AS800260
AS800261
AS800262
AS800263
AS800264
AS800265
AS800267
AS800269
$271.00
271.00
271.00
271.00
271.00
271.00
391.00
391.00
0.05
0.1
0.2
0.2
0.5
1
2
2
AS800271
AS800272
391.00
391.00
10
20
—
AS800252
226.00
0.1
AS800273
271.00
0.1
—
271.00
271.00
271.00
85.00
130.00
0.2
0.2
0.5
—
AS800280
AS800281
AS800282
$529.00
529.00
529.00
0.02
0.05
0.1
604.00
604.00
1
2
—
—
—
AS800286
AS800288
—
—
Vacuum
30"HG to 0
Compound
Hg/PSI
30/0/15
30/0/30
30/0/100
Vac
AS800253
226.00
0.2
AS800254
226.00
0.5
AS800255
226.00
1
NISTPR5 NIST Traceable Certificate
NISTPR6 NIST Traceable Certificate with Data
Pres
0.1
0.2
0.5
Vac
AS800274
AS800275
AS800276
Pres
0.1
0.1
0.5
—
—
—
www.davis.com
Precision Test Gauges
NIST
it
Features high accuracy of 0.1% of span
• High accuracy 0.1% of span
• Repeatability 0.02% of span
• Hysteresis 0.1% of span
(or less)
• Sensitivity 0.1% of span
• 5-year warranty
SPECIFICATIONS
Accuracy
Calibration Points
Overpressure
Repeatability
Hysteresis
Measure and Fluid
Needle Movement
Temperature
0.1% of span This accuracy statement includes repeatability, linearity and hysteresis, obtained by calibration with pressure standards
traceable to N.I.S.T.
12 points up scale and 12 down scale
120% of span without calibration shift 200% of span without damage
0.02% of span
.1% span or less
gauges are calibrated with air (up to 1,000 psi) or distilled water (up to 10,000 psi). Other fluids compatible with Ni Span C, 300
series stainless steel and Buna-N may be used. Gauges may be oxygen cleaned
310°
25°F (-32°C) to 125°F (+ 52°C)
7" Dial Size
Price
Catalog
No.
8.5" Dial Size
Price
Catalog
No.
12" Dial Size
Price
15
.02
TD7000
25519-15-E51
$1,250.00
TD8500
25516-15-E21
$1,385.00
TD1200
25517-15-E21
$1,540.00
30
.05
TD7001
25519-21-E51
1,250.00
TD8501
25516-21-E21
1,385.00
TD1201
25517-21-E21
1,540.00
60
0.1
TD7002
25519-22-E51
1,250.00
TD8502
25516-22-E21
1,385.00
TD1202
25517-22-E21
1,540.00
100
0.1
TD7003
25519-23-E51
1,150.00
TD8503
25516-23-E21
1,285.00
TD1203
25517-23-E21
1,540.00
150
0.2
TD7004
25519-24-E51
1,150.00
TD8504
25516-24-E21
1,285.00
TD1204
25517-24-E21
1,540.00
200
0.2
TD7005
25519-25-E51
1,150.00
TD8505
25516-25-E21
1,285.00
TD1205
25517-25-E21
1,440.00
500
0.5
TD7008
25519-27-E51
1,150.00
TD8508
25516-27-E21
1,285.00
TD1208
25517-27-E21
1,440.00
800
1.0
TD7010
25519-53-E51
1,150.00
TD8510
25516-53-E21
1,285.00
TD1210
25517-53-E21
1,440.00
1000
1.0
TD7011
25519-29-E51
1,150.00
TD8511
25516-29-E21
1,285.00
TD1211
25517-29-E21
1,440.00
1500
2.0
TD7012
25519-31-E51
1,220.00
TD8512
25516-31-E21
1,355.00
TD1212
25517-31-E21
1,510.00
2000
2.0
TD7013
25519-32-E51
1,220.00
TD8513
25516-32-E21
1,355.00
TD1213
25517-32-E21
1,510.00
3000
5.0
TD7014
25519-33-E51
1,220.00
TD8514
25516-33-E21
1,355.00
TD1214
25517-33-E21
1,510.00
5000
5.0
TD7016
25519-35-E51
1,220.00
TD8516
25516-35-E21
1,355.00
TD1216
25517-35-E21
1,510.00
8000
10
TD7018
25519-37-E51
1,220.00
TD8518
25516-37-E21
1,355.00
TD1218
25517-37-E21
1,510.00
10,000
10
TD7019
25519-38-E51
1,220.00
TD8519
25516-38-E21
1,355.00
TD1219
25517-38-E21
1,510.00
15 PSIV
.02
TD7020
2521X9-15-E51
1,365.00
TD8520
2521X6-15-E21
1,500.00
TD1220
2521X7-15-E21
1,655.00
30" VAC
.05
TD7021
2521X9-21-E51
1,365.00
TD8521
2521X6-21-E21
1,500.00
TD1221
2521X7-21-E21
1,655.00
800 mmHg 1.0
TD7022
2521X9-ISB-E51
1,365.00
TD8522
2521X6-ISB-E21
1,500.00
TD1222
2521X7-ISB-E21
1,655.00
15 PSIA
TD7023
25519-15-E51EBQ
1,365.00
TD8523
25516-15-E51EBQ
1,500.00
TD1223
25517-15-E51EBQ
1,655.00
30/30
TD7024
2511X9-21E21-E51
1,365.00
TD8524
2511X6-21E21-E21
1,500.00
TD1224
2511X7-21E21-E21
1,655.00
30/60
TD7025
2511X9-21E22-E51
1,365.00
TD8525
2511X6-21E22-E21
1,500.00
TD1225
2511X7-21E22-E21
1,655.00
30/100
TD7026
2511X9-21E23-E51
1,365.00
TD8526
2511X6-21E23-E21
1,500.00
TD1226
2511X7-21E23-E21
.02
1,655.00
Catalog No.
Description
NISTPR5
$85.00
NISTPR6
130.00
Price
www.davis.com
H
Pressure Minor
Catalog
Range Graduations No
719
Analog/Digital Pressure Gauge
NIST
it
• Solid front case
• Direct drive movement — No cams, gears or
linkages
• Small diameter tubing wound in spiral/helical coil
• Overpressure stop — Prevents false (LOW) reading
while overpressure condition exists.
• Center post bearing carrier. Supports pointer shaft
and coil
• Rear blowout hole (covered with label)
• Case and shock protection ribs help prevent damage
to bourdon tube in the event of severe Shock.
• Filter plug protects the bourdon tube
• High impact plastic case and lens
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
H
720
Size
Accuracy
Pressure Connection
Wetted Parts
Housing
Movement
Overpressure
Calibration
Standard Accessory
Optional Accessory
Electrical
Power Supply
Warm-Up Time
Current Consumption
Catalog No.
DW33721
DW33722
DW33723
DW33724
NISTPR5
NISTPR6
6”—design conforms to ASME B40.1
ASME Grade 2A (1/2% of full scale)
1/4” NPT female, duplicated back and bottom
Inconel® X-750 Bourdon tube, 316 SS connection block
Black polycarbonate case and clear acrylic cover
Direct drive of pointer
150% of full scale. Normal operation between 25% and 75% of full scale
Vertical mounting standard
(1) 1/4” NPT plug, brass or stainless steel
No. A-341 Brass Adapter. 1/4” NPT x G 1/2 A (per ISO 228/1) parallel thread
10-35 VDC, 16-26 VAC
10 minutes (LCD)
38 mA max (DC), 76 mA max (AC)
Model
7214D-G100
7214D-G200
7214D-G300
7214D-G600
—
—
Description
Digital/Analog Pressure Gauge, Range 0-100 psig
Price
$499.00
499.00
499.00
499.00
85.00
130.00
www.davis.com
Direct Drive Rugged Test Gauges
NIST
it
6 Year Warranty
• Helically Wound Bourdon Tube
in Inconel X-750
• All Wetted Parts in 316SS or
Inconel
• Precision Anti-Friction
Sapphire Shaft Bearings
• High Impact Resistant Cycolac
Case
• Needle Edged Pointer
• Adjustable Zero Set-Point
• One Moving Part
• No recalibration required
• Longer field service life
• Greater reading accuracy
• Maintenance free
• Corrosion resistant
• Safer operation (UL listed)
SPECIFICATIONS
Pressure Ranges
Burst Pressure
Accuracy
Temperature
Life
Repeatability
0-30 psig to 0-20,000 psig equivalent ISO and
Metric Scales Available
500% of Scale Pressure*
± 0.25% of span. No tapping required, includes all
friction, hysteresis, and linearity variations.
-65°F to + 190°F (-54°C to + 88°C)
250,000 cycles minimum to 1,000,000, 80% of full scale
NISTPR5
Price
$329.00
299.00
299.00
299.00
299.00
299.00
299.00
299.00
299.00
6" Dial Size
Red
Yellow
Catalog No.
Price
Catalog No.
Price
D255452153
$394.00
D255452154
$394.00
D255452253
364.00
D255452254
364.00
D255452353
364.00
D255452354
364.00
D255452653
364.00
D255452654
364.00
D255452753
364.00
D255452754
364.00
D255452953
364.00
D255452954
364.00
D255453353
364.00
D255453354
364.00
D255453553
364.00
D255453554
364.00
D255453853
364.00
D255453854
364.00
Price
$329.00
299.00
299.00
299.00
299.00
299.00
299.00
299.00
299.00
6" Dial Size
Red
Yellow
Catalog No.
Price
Catalog No.
Price
D255452123
$394.00
D255452124
$394.00
D255452223
364.00
D255452224
364.00
D255452323
364.00
D255452324
364.00
D255452623
364.00
D255452624
364.00
D255452723
364.00
D255452724
364.00
D255452923
364.00
D255452924
364.00
D255453323
364.00
D255453324
364.00
D255453523
364.00
D255453524
364.00
D255453823
364.00
D255453824
364.00
85.00
NISTPR6
H
No Flange; 1/4” NPT Male Bottom Connection; PSI Dial
Dial Size
4 1/2" Dial Size
Case Color
Red
Yellow
Range
Catalog No.
Price
Catalog No.
0-30 psi
D255442153
$329.00
D255442154
0-60 psi
D255442253
299.00
D255442254
0-100 psi
D255442353
299.00
D255442354
0-300 psi
D255442653
299.00
D255442654
0-500 psi
D255442753
299.00
D255442754
0-1000 psi
D255442953
299.00
D255442954
0-3000 psi
D255443353
299.00
D255443354
0-5000 psi
D255443553
299.00
D255443554
0-10,000 psi
D255443853
299.00
D255443854
Front Flange; 1/4” NPT Male Back Connection; PSI Dial
Dial Size
4 1/2" Dial Size
Case Color
Red
Yellow
Range
Catalog No.
Price
Catalog No.
0-30 psi
D255442123
$329.00
D255442124
0-60 psi
D255442223
299.00
D255442224
0-100 psi
D255442323
299.00
D255442324
0-300 psi
D255442623
299.00
D255442624
0-500 psi
D255442723
299.00
D255442724
0-1000 psi
D255442923
299.00
D255442924
0-3000 psi
D255443323
299.00
D255443324
0-5000 psi
D255443523
299.00
D255443524
0-10,000 psi
D255443823
299.00
D255443824
We've replaced the antiquated C shape Bourdon tube in
our pressure gauges with a unique helically wound
Bourdon, The Direct Drive Difference. Our Bourdon coil is
coupled directly to the shaft-pointer, the only moving part.
Fewer parts, fewer problems. Regular calibration is
eliminated because there are no complex, wear-prone
parts. Linearity is built-in; no span adjustment is necessary-ever. And accuracy is maintained throughout the life
of the gauge, many times longer than those old-fashioned
designs.
The Direct Drive design gives instant response while resisting pointer pulsation. Overpressure? Even 150% of full
scale will not affect the accuracy of most gauges. and it
takes pressures of 500% greater than dial range to result in
sensing coil rupture. Even when subject to abuse, Direct
Drive gauges last longer.
130.00
www.davis.com
721
8 1⁄2" High Accuracy ±0.066% Pressure Gauges
NIST
it
Available in Gauge, Absolute, Vacuum, Differential and Compound Scales
Series 1500 Gauges have capsule-type pressure elements up to and including the 150-psig range. Ranges
of 200 psig and above have Bourdon tubes. The
pressure to be measured is applied to the capsule or Bourdon tube through a single connection in the case. The case has a temperedglass dial cover, solid-front dial, and a
blow-out plug on the back. Readings are
referenced to atmospheric pressure in
the case.
• Accuracy ± 0.066% of full scale
• Excellent Repeatability ± 0.03%
• Dual Revolution Dial offers 45"
needle travel
• All Dials are custom printed for each
Individual mechanism
• Widely spaced graduations give
excellent readability
• Calibration is traceable to NIST and
MIL-STD-45662
Catalog No. Model
SPECIFICATIONS
H
722
Case
Construction
Zero
Adjustment
Case
Connections
Anodized aluminum with tempered-glass dial cover; flush
mounted by three screws through the bezel.
The zero-adjusting screw is accessible through both the
front and the back of the case.
150 psi and below, 1⁄8" female NPT; 200 psi and above,
1
⁄4" female NPT. Both has a built-in stainless steel filter
and are located in the bottom of the case.
Materials
150 psi and below (capsule) Ni-Span C; brass; 303
Exposed to stainless steel; soft solder; silver solder. 303 stainless
Measured
tubing and adapter with silver solder at the pressure
Gas
connection are optional instead of brass and soft solder in
the ranges up to and including 150 psi, but standard in the
ranges of 200 psi and above.
200 psi and above (Bourdon tube) Ni-Span C; 302, 303,
and 304 stainless steel; Easy-flow #45 brazing alloy; silver
solder; nylon® or TFE.
Hysteresis
0.1% of full scale for ranges of 150 psi and below; 0.2% of
full scale for 200 psi and above.
Maximum
0.1% of full scale per 10°C change from 25°C.
Temperature Effect
Media gases and liquids must be non-corrosive.
All standard units are gas or air only.
Optional
Gauges with ranges 200, 300, and 500 psi (Bourdon tubes)
Liquid
can be calibrated for liquid service as optional. The 0-1000
Service
psi range is calibrated for liquid service only.
Case
Cases are open to atmosphere.
Pressure
Bleed Tube Ranges of 200, 300, and 500 psi (Bourdon tubes), when
calibrated for liquid service, have bleed tubes to facilitate
filling and flushing. On the 1000 psi range, a bleed tube is
standard.
Description
Price
81⁄2" Pressure Gauge
$1,730.00
Specify Range Required
WT555611 1500A
81⁄2" Pressure Gauge Absolute
3,430.00
Specify Range Required.
WT555613 —
Carrying Case
453.00
WT555614 —
Liquid Service Calibration
263.00
When ordering, please specify specific range required
WT555610
1500G
Gauge
Range
Graduation
Gauge
Range
0-4.5 psi
0-10 psi
0-15.5 psi
0-20 psi
0-30 psi
0-45 psi
0-60 psi
0-100 psi
0-150 psi
0-200 psi
0.005 psi
0.01 psi
0.02 psi
0.02 psi
0.05 psi
0.05 psi
0.1 psi
0.01 psi
0.2 psi
0.2 psi
0-300 psi
0-500 psi
0-125" water
0-280" water
0-800 mm Hg
0-31.5" Hg
0-60" Hg
0-120 Hg
Vacuum
-30" Hg to 0
Absolute
Range
Graduation
Absolute
Range
Graduation
0-15.5 psia
0-25 psia
0-35 psia
0-50 psia
0-100 psia
0-150 psia
0-200 psia
0.02 psia
0.05 psia
0.05 psia
0.05 psia
0.1 psia
0.2 psia
0.2 psia
0-300 psia
0-500 psia
0-800 mm Hg
0-31.5" Hg
0-50" Hg
0-70" Hg
0-100" Hg
0.5 psia
0.5 psia
1.0 mm
0.05"
0.05"
0.1"
0.1"
Graduation
0.5 psi
0.5 psi
0.2"
0.5"
1.0 mm
0.05"
0.1"
0.2"
0.05"
www.davis.com
NIST
it
WIKA Type 342.11 precision test
gauges are high quality, time-proven
instruments designed for use as pressure transfer standards and in applications requiring exceptional precision
and high reliability in the measurement of pressure. Both types of WIKA
precision test gauges feature a
Bourdon tube made of Ni-Span C® for
all pressure ranges above 0-10 psi. NiSpan C® has exceptional temperature
stability and eliminates the need for
an expensive thermal compensator.
SPECIFICATIONS
Size
10” (250 mm)
Case
Cast aluminum, dark grey with hammered finish
Ring
Cast aluminum, dark grey with hammered finish
Connection
316 stainless steel
Bourdon Tube Ni-Span C®
Window
Green tinted acrylic, non-reflecting
Dial
White aluminum with mirrored band and zero
adjustment
Pointer
Black aluminum knife-edge
Accuracy
± 0.1% of span (ASME B40.1 Grade 4A)
*Beryllium copper is substituted for 10 psi range.
Range
2 Year
NIST
Save 50%
H
on 2nd year
recalibration
Connection
0 - 30 psi
Lower Mount
0 - 60 psi
Lower Mount
0 - 100 psi
Lower Mount
0 - 160 psi
Lower Mount
0 - 100 psi
Lower Mount
0 - 300 psi
Lower Mount
0 - 400 psi
Lower Mount
0 - 600 psi
Lower Mount
0 – 1000 psi
Lower Mount
0 – 2000 psi
Lower Mount
0 – 3000 psi
Lower Mount
0 – 15000 psi
Lower Mount
Connection Size
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
1/4” NPT
Price
$1,572.75
1,378.39
1,378.39
1,378.39
1,378.39
1,378.39
1,378.79
1,378.79
1,507.61
1,507.61
1,507.61
1,789.17
85.00
130.00
127.00
195.00
www.davis.com
Catalog No.
WK9328831
WK9328840
WK9328858
WK9328866
WK9328874
WK9328882
WK9328890
WK9328904
WK9328920
WK9328947
WK9328955
WK9328998
NISTPR5
NISTPR6
NISTPRQ5
NISTPRQ6
Ask about
723
Precision 12" Dial Pressure Gauge
NIST
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Traceable to NIST
Mil-Std-45662A (Calibration Systems)
ANSI B40.1 (Recommended Practices), Grade 4A
Repeatability
Hysteresis
Sensitivity
Pressure Ranges
“Unitized” Bourdon Tube Materials/
Pressure Ranges
Beryllium Copper
403 Stainless Steel
Standard Pressure Inlet Type And Location
Optional Pressure Inlet Type And Location
724
™
• Unique unitized Bourdon tube design eliminates welded joints and crevices for positive
cleaning. Bourdon tube materials of beryllium
copper and 403 stainless steel. Tip bleed
Bourdon tube facilitates cleaning or purging
operations
• Accuracy of ± 0.1% of span, traceable to NIST.
Meets MIL-Std-45662 and ANSI B40.1 Grade
4A
• Pressure ranges available from VAC to 0100,000 psi or in metric equivalents
• Solid front aluminum case with stainless steel
pressure relief back for operator safety
• Dial sizes also available in 6", 81⁄2"
(see page 592)
• Overload and underload stops protect movement from disengagement
• Ball bearing movement assembly assures
smooth and precise gauge operation
• White dial, knife-edge pointer with a mirror ring
Model A4A
Accuracy
H
it
Standard
0/15 PSI through 0/40 PSI
0/50 PSI through 0/100,000 PSI
1
⁄4 NPT Male Bottom
Autoclave F250-C (Aminco 45-11310)-Back Connect
1
⁄8 NPT-Male or Female-Back or Bottom
1
⁄4 NPT-Male or Female-Back or Bottom
Autoclave F250-C-Female Only-Back or Bottom
Double Scale (PSI In. Hg, etc.)
Optional Pressures Types (Gauge Pressure-Standard) Absolute, Vacuum, Compound
Bi-Metallic Temperature Compensator
Eliminates temperature errors from -25°F to + 125°F
± 0.1% of Span
Includes Calibration certificate
± 0.02% of Span
<0.1% of Span
0.01% of Span
Optional
0/15 PSI through 0/40 PSI
Over 10,000 through 100,000
Specify Type and Location
Optional
Optional
12" Pressure Gauge
Range
Pressure PSI
0-15 PSI
0-30 PSI
0-50 PSI
0-75 PSI
0-100 PSI
0-200 PSI
0-500 PSI
0-1000 PSI
0-1500 PSI
0-2000 PSI
0-3000 PSI
0-5000 PSI
0-7500 PSI
0-10,000 PSI
0-20,000 PSI
NISTPR5
NISTPR6
Catalog
No.
HS649201
HS649202
HS649203
HS649204
HS649205
HS649206
HS649207
HS649208
HS649209
HS649210
HS649211
HS649212
HS649213
HS649214
HS649215
—
—
Minor
Graduations
Price
.02
$1,990.00
.05
1,990.00
.1
1,835.00
.1
1,835.00
.2
1,835.00
.5
1,835.00
1
1,835.00
2
1,835.00
2
1,990.00
5
1,990.00
5
1,990.00
10
1,990.00
10
1,990.00
20
2,090.00
20
2,510.00
Inches
Catalog
Minor
of Water
No.
Graduations
Price
0-500"
HS649216
1
$2,135.00
0-750"
HS649217
1
2,135.00
0-1000"
HS649218
2
2,135.00
Vacuum
0-30" Hg
HS649219
.05
2,135.00
Compound Ranges
-30" Hg-15PSIg
HS649220
.05-.02
2,135.00
-30" Hg-60PSIg
HS649221
.05-.1
2,135.00
-30" Hg-150PSIg
HS649222
.05-.2
2,135.00
Catalog No.
Description
HS649106
Bi-Metallic Temperature Compensation
180.00
HS649103
Peak Load Indicator
245.00
HS649102
Slotted Link for pressure relief protection
115.00
HS649104
Wall Mounting Bracket (installed)
90.00
HS649105
Metric Scales in mm of Hg, Bar, Kg/cm2, KPA and MPA Scales Inquire
85.00
130.00
www.davis.com
Pressure Calibrator for Liquids and Gases
NIST
it
The Meri-Cal II is a microprocessor based pressure calibrator with 4 1⁄2 digit resolution and
±0.25% of full scale accuracy. Multi-sensor capability allows measurement of differential pressure, static pressure, electrical current and voltage in one unit. Any two o these measurement can
be displayed on a 4 line by 20 character alpha-numeric display. The Meri-Cal II can measure and
display the pressure in any of eleven engineering
units. A user units feature allows calculation and
display of custom pressure units. An adjustable
damping feature eliminates the effects of pulsating pressures; a Min/Max function captures the
extremes of varying pressure signals; and a Hold
button can freeze the display at any point of interest. DN models offer a gas flow function to display
flow rate in user defined units. For transmitter
and transducer calibrations, the electrical inputs
have ranges of ±50 mA and ±50 VDC. Each MeriCal II is certified traceable to NIST.
• Accuracy of ± 0.025% of Full Scale
• No Temperature Effect from 23° to 122°F
• 4 1⁄2 Digit Resolution
• Multiple Sensors for Measurement of
Differential Pressure, Static Pressure,
Voltage and Current
SPECIFICATIONS
Available Sensor Accuracies
Model
Description
Price
MR3600
3600
Meri-Cal II (Must order one or two sensors
from the selection below. For two sensors,
both must have the same accuracy)
$649.00
Sensors
Catalog No. Accuracy
Model
Description
MR12136
MR12137
MR12138
MR12139
MR12140
MR12141
Accessories
MRK
DN0200
DN2000
GI0020
GI0200
GI2000
AI2000
0-200” H2O Differential
0-2000” H2O Differential
0-20 PSI Gauge
0-200 PSI Gauge
0-2000 PSI Gauge
0-2000mm Hg Absolute
595.00
595.00
703.00
703.00
703.00
703.00
Calibration Kit, includes: (3) Nylon tubing, 6 ft.
(3) Adapter, 1⁄8" O.D. tube to 1⁄8" MNPT (2) Tee,
Brass 1⁄8" O.D. tubing, (1) Adapter, 3⁄16" hose
barb to 1⁄8" MNPT and carrying case
Hand Pump (Pressure)
Vacuum Hand Pump
Test Leads
A34386 connector Kit
ABS Plastic Case
1' Hose High, Pressure Connectors
High Pressure to 1⁄8" female NPT adapters (5)
352.00
MR84066
MR84067
MR84082
MR84083
MR84084
MR84091
MR84092
NISTPR44
NISTPR45
.025%
.025%
.025%
.025%
.025%
.025%
Price
301.00
301.00
28.00
68.00
87.00
90.00
125.00
199.00
250.00
Display
Power
Media Compatibility
± 50.000 mA ± 0.025% FS
± 50.000 VDC ± 0.025% FS
-40°F to 140°F (-40°C to 60°C)
23°F to 122°F (-5°C to 50°C)
Twice range on GI/AI units. Twice range on
DN units when pressurized on high side only.
150 PSI static on DN units when applied at
the same time to both sides of the sensor
4 Lines x 20 characters LCD with
simultaneous presentation of any two
measurements
Two 9 volt, field replaceable batteries
Non-isolated DN sensors for clean, dry,
non-corrosive gases. Isolated GI/AI sensors
for fluids compatible with 316ss
Connections
1
Pressure
⁄8" female NPT, 316ss.
Electrical
Shielded Banana Jacks
Enclosure
(8.5" x 5.2" x 3.0") ABS plastic case.
Features
Selection of engineering units - PSI, inches H2O, kg/cm2, Pascals, mBars, Bars,
mm Hg, inches Hg, cm H2O, and user selectable scaling
Damping (averaging) - selectable from 0.1 seconds to 25 seconds
Min/Max capture - capture speed is equal to the selected damping rate
Hold function
Accessories Supplied: Soft carrying case
www.davis.com
H
Catalog No.
Electrical Measurements
Current
Voltage
Temperature:
Storage
Operating
Pressure Limits
± 0.025% FS (23 to 122°F)
± 0.05% FS (23 to 122°F)
725
718 Pressure Calibrator
NIST
it
Features a Built-In Pressure/Vacuum Pump
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
H
726
• Built-in pressure/vacuum hand
pump, with vernier and bleed valve
• Pressure measurement to 0.05% of
full span, using and internal pressure sensor
• Pressure measurement to 10,000
psi/700 bar using any of the Fluke700Pxx pressure Modules
• Wide range of selectable measurement units for pressure
• Current measurement with 0.025%
accuracy and 0.001 mA resolution
• 24 volt loop power supply
• Min-Max Hold functions
• Simple, push-button user interface
• Rugged — Ideal for field use
SPECIFICATIONS
Compact and lightweight
Maximum voltage
Non-operating temperature
Relative humidity
Operating altitude
Shock
Vibration
Safety
EMC
Size/Weight
Power
Battery Life
Warranty
210 mm L x 83 mm W x 62 mm D
(8.25 in. L x 3.27 in. W x 2.44 in. D)
-10°C to 55°C
30 volts
-40°C to 60°C
-10°C to 55°C
95% (10°C to 30°C); 75% (30°C to 40°C);
45% (40°C to 50°C); 35% (50°C to 55°C)
3,000m max
1 m drop test
Random, 2g, 5-500 Hz
CSA C22.2 No. 1010.1:1992
EN50082-1:1992 and EN55022:1994; Class B
210 mm L x 83 mm W x 62 mm D
(8.25in. L x 3.27in. W x 2.44in. D); 737 g (26 oz)
Two 9V ANSI/NEDA 1604A or IEC 6LR619V
alkaline batteries
4 to 20 hours, typical, depending on functions used
Three years (one year on pressure pump)
Cat. No
Model
FL71830
718-30G
Description
Price
Pressure Calibrator, includes protective $1,695.00
yellow holster, TL75 test leads,Test clips
and User manual (Vac/30 PSIG)
FL718100
718-100G Pressure calibrator includes protective
1,695.00
yellow holster, TL75 test leads, Test clips
and User manual (Vac/100 PSIG)
NISTPR44
—
NIST Traceable Certificate (for calibrators) 199.00
NISTPR45
—
250.00
with Data (for calibrators)
Pressure Modules
FL700HTP
700HTP Hydraulic Test Pump (10,000 PSI)
849.00
FL700PTP
700PTP Pneumatic Test Pump (360 PSI)
449.00
FL700IV
FL700-IV Current Shunt
209.00
FL700PO1
700PO1 Pressure Module, 0-10 In, H20 Diff.
995.00
FL700PO2
700PO2 Pressure Module, 0-1 PSID
895.00
FL700PO3
895.00
FL700PO4
995.00
FL700PO5
700PO5 Pressure Module, 0-30 PSIG
995.00
FL700PO6
995.00
FL700PO7
995.00
FL700PO8
700PO8 Pressure Module, 0-1,000 PSIG
995.00
FL700PO9
700PO9 Pressure Module, 1,500 PSIG
995.00
FL700P22
700P22
Pressure Module, 0-1 PSID, Wet
995.00
FL700P23
700P23
995.00
FL700P24
700P24
995.00
FL700P27
700P27
Pressure Module, 0-30 PSIG, Wet
995.00
FL700P29
700P29
Pressure Module, 3,000 PSIG, Wet
1,695.00
FL700P30
700P30
1,695.00
FL700P31
700P31
1,695.00
FL700PA3
700PA3
Pressure Module, 0-5 PSIA
1,095.00
FL700PA4
700PA4
1,095.00
FL700PA5
700PA5
1,095.00
FL700PA6
700PA6
1,095.00
FL700PCK
700PCK Pressure Module Calibration Kit
629.00
FL700PD2
700PD2 Pressure Module ± 1 PSID
1,095.00
FL700PD3
1,095.00
FL700PD4
700PD4 Pressure Module ± 15 PSId
1,095.00
FL700PD5
700PD5 Pressure Module -15 + 30 PSIG
1,095.00
FL700PD6
1,095.00
FL700PD7
700PD7 Pressure Module -15 =200 PSIG
1,095.00
MR84066
B34686
Pressure Pump 145 PSI Max
274.00
FL700PV3
700PV3 Pressure Module -5 PSID
1,095.00
FL700PV4
1,095.00
NISTMD01
NIST Traceable Certificate (for modules)
125.00
NISTMD02
159.00
with Data (for modules)
www.davis.com
710 Series Pressure Calibrators
For all models of the 710 Series
• Simple controls
• Clear, 5 digit, liquid crystal display
• Operating temp. -10°C to 55°C
• Safety: CSA C22.2 No. 1010.1:1992
• 3 year warranty
• Included:
- Fluke 710 Series Process Calibrator
- C81Y Protective Yellow Holster with
Flex-Stand™
- Test leads and alligator clips
- Single 9V alkaline battery
- Instruction sheet (14 languages)
- Statement of Calibration Practices
NIST
it
Pressure Calibrators
• Measure pressure, 0.05% of full
scale
• Measure mA, 0.025%
• Calibrate I/P transmitter with
simultaneous pressure and
current measurement
• Select eleven different engineering
units
• Compatible with non-corrosive
gases and liquids
• Zero, min, max, hold functions
• 1⁄8 " NPT female pressure fitting
• Two shrouded banana jacks
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Cat. No
Model
Description
FL7130G
717 30G Fluke 0-30 Psig Pressure Calibrator
FL717100G 717 100G Fluke 0-100 Psig Pressure Calibrator
NISTPR44
NISTPR45
—
—
Pressure Module, 0-10 In, H20 Diff.
Pressure Module, 0-1 PSID
Pressure Module, 0-30 PSIG
Pressure Module, 0-1,000 PSIG
Pressure Module, 1,500 PSIG
$995.00
795.00
199.00
250.00
995.00
895.00
895.00
895.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
$1,695.00
Cat. No
Model
Description
FL700P30
FL700P31
FL700PA3
FL700PA4
FL700PA5
FL700PA6
FL700PCK
FL700PD2
FL700PD3
FL700PD4
FL700PD5
FL700PD6
FL700PD7
MR84066
FL700PV3
FL700PV4
NISTMD01
700P30
700P31
700PA3
700PA4
700PA5
700PA6
700PCK
700PD2
700PD3
700PD4
700PD5
700PD6
700PD7
B34686
700PV3
700PV4
Pressure Module Calibration Kit
Pressure Module ± 1 PSID
Pressure Module ± 5 PSID
Pressure Module ± 15 PSId
Pressure Module -15 + 30 PSIG
Pressure Module -15 + 100 PSIG
Pressure Module -15 =200 PSIG
Pressure Module -5 PSID
Pressure Module -15 PSID
(for modules)
NISTMD02
Price
1,695.00
1,695.00
1,095.00
1,095.00
1,095.00
1,095.00
629.00
1,095.00
1,095.00
1,095.00
1,095.00
1,095.00
1,095.00
274.00
1,095.00
1,095.00
125.00
159.00
www.davis.com
H
Pressure Modules
FL700PO1
700PO1
FL700PO2
700PO2
FL700PO3
700PO3
FL700PO4
700PO4
FL700PO5
700PO5
FL700PO6
700PO6
FL700PO7
700PO7
FL700PO8
700PO8
FL700PO9
700PO9
FL700P22
700P22
FL700P23
700P23
FL700P24
700P24
FL700P27
700P27
FL700P29
700P29
NIST Traceable Certificate (for calibrators)
Price
727
Documenting Pressure Calibrators
NIST
it
New Bright White Display
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
741B A Complete Documenting Calibrator
The 741B is the economical choice for plants that don’t use
PCs or that require traditional paper forms. It has storage
capacity for a day’s calibration and measurement data. When
you’re back at the shop, recall the data on screen to fill out
calibration forms.
743B More memory, Plus a PC Interface and Data
Logging
The 743B has all the capabilities of the 741B plus a PC
interface that lets you download procedures, lists, and
instructions created with software - or upload data for printing, archiving, and analysis. With its expanded memory, the
743B can hold a full week of calibrations and procedures.
744 Calibrates and Communicates with HART
Instruments
H
728
The new Fluke 744 is our most powerful Documenting
Process Calibrator. It is enhanced with the ability to calibrate
and communicate with Hart instruments. One rugged tool
offers the most complete Hart implementation available
within a field calibrator.
DPC/TRACK Software for Instrumentation
Management
Manage your instruments and your calibration data with
this easy-to-use instrumentation management database.
Create calibration procedures, lists, and instructions on
your PC and download them to the 743B or 744. Upload your
calibration data back to your PC. Print reports or export data
in standard ASCII format.
Pressure Modules
An optional set of external pressure modules provides
pressure calibration and measurement capabilities.
Twenty-seven modules are available, with basic accuracy
specs to 0.05%. Ranges start at 0-10”H2O (0-2.5 kPa) and
go to 0-10,000 psi (0-70,000 kPa).
Standard Equipment
Every fluke 741B, 743B and 744 comes with two sets of
TL24 industrial test leads, two sets of AC20 test clips, one set
of TP20 test probes, a BP7217 battery pack, a BC7210 battery
charger, an instruction manual, and all units are shipped with
NIST traceable certificates. Every 743B includes a serial port
cable and a DPC/TRACK Sample, including complimentary
upload/export utility software. DPC/TRACK software includes
software disks, an instruction manual, a serial port cable, and
a DB9 to DB25 (9-pin to 25-pin) adapter.
xCat. No
Model
FL741
FL743
FL744
741B
743B
744
Description
Price
Fluke Documenting Process Calibrator
with HART capabilities
RENT743B —
Weekly Rental — Fluke 743B
NISTPC44
—
NIST Traceable Certificate (for calibrators)
NISTPC45
—
Process Calibrator Modules and Accessories
FL700HTP
700HTP Hydraulic Test Pump (10,000 PSI)
FL700PTP
700PTP Pneumatic Test Pump (360 PSI)
FL700IV
700IV
Current Shunt
FL700P01
700P01
Pressure Module, 0-10 In, H20 Diff.
FL700P02
700P02
FL700P03
700P03
FL700P04
700P04
FL700P05
700P05
FL700P06
700P06
FL700P07
700P07
FL700P08
700P08
Pressure Module, 0-1,000 PSIG
FL700P09
700P09
Pressure Module, 1,500 PSIG
FL700P22
700P22
FL700P23
700P23
FL700P24
700P24
FL700P27
700P27
FL700P29
700P29
FL700P30
700P30
FL700P31
700P31
FL700PA3
700PA3
FL700PA4
700PA4
FL700PA5
700PA5
FL700PA6
700PA6
FL700PCK
700PCK Pressure Module Calibration Kit
FL700PD2
FL700PD3
FL700PD4
700PD4 Pressure Module ± 15 PSId
FL700PD5
FL700PD6
FL700PD7
700PD7 Pressure Module -15 =200 PSIG
MR84066
B34686
FL700PV3
FL700PV4
FL700SW
700SW
DPC/Track Instrumentation Management
Software for Models 702, 743 and 744
FL700TC1
700TC1 T/C Mini-Plug kit 10 common types
FL700TC2
700TC2 T/C Mini-Plug kit 5 common types
NISTMD01
NIST Traceable Certificate (for modules)
NISTMD02
Accessories
BC7210
BC7210 Battery Charger
BE9005
BE9005 Battery Eliminator
BP7217
BP7217 Nicad Battery Pack
C700
C700
Hard Carrying Case (700 Series)
C781
C781
Soft Carrying Case
C789
C789
Soft Carrying Case
$2,995.00
3,995.00
4,750.00
500.00
199.00
250.00
849.00
449.00
209.00
995.00
895.00
895.00
895.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
995.00
1,695.00
1,695.00
1,695.00
1,095.00
1,095.00
1,095.00
1,095.00
629.00
1,095.00
1,095.00
1,095.00
1,095.00
1,095.00
1,095.00
274.00
1,095.00
1,095.00
1,795.00
65.00
55.00
125.00
159.00
119.00
63.00
129.00
159.00
39.00
80.00
www.davis.com
Dual Range Pressure Calibrator
NIST
it
NIST
it
.05% of Reading Accuracy
• Dual isolated 316SS pressure sensors with
a rugged nickel plated manifold designed for
harsh environments
• Robust design - A NEMA 4X water resistant
sealed case and a sealed membrane
keypad suited for the most rigorous
applications
• Versatile broad pressure ranges individually
temperature compensated for high accuracy
over a broad operating range of 0-50°C
• Engineering units: PSI, in H O (4°C), in H O
(20°C), in H O (60°C), ft H O (4°C), ft H O
(20°C), cm H O (4°C), cm H O (20°C),
m H O (4°C), m H O (20°C), BAR, Kg/cm2,
kPa, mPa, mm Hg, m Hg
• Communications through an RS232 port for
real time data transfer to a PC or printer
• Dual Range — ideal for custody transfer and
mass flow applications
• % Error function automatically calculates
transmitter error during calibration
• Integral 24 VDC power supply to power
various devices under test
• MIN/MAX storage and retrieval
• Class I Division I Group C & D Certification
pending
• Pressure switch test feature
2
2
Pressure
Ranges
Accuracy
2
2
2
2
SPECIFICATIONS
2
2
2
1 PSI to 5.000 PSI (0 to 135" H2O) non-corrosive
gases and liquids
All gases and liquids
-5 PSI to 30.000 PSI
compatible with 316
-5 PSI to 100.00 PSI
SS and nickel plated
-12 PSI to 300.00 PSI
brass
-12 PSI to 3000.0 PSI
5 PSI: ± 0.5% of reading ± 0.001 PSI
Vacuum: 0.5PSI, all ranges
Electrical
Ranges
Accuracy
18°C to 28°C
Input Protection
Environmental
Operating Temp
Storage Temp
Stability
0 to 24.000 mA
0 to 10.000 V
± 0.025% of reading ± 2 LSD
1/8 A Fuse
0°C to 50°C
20°C to 60°C
± .005% F.S./°C for both pressure and electrical
for temperatures outside of 23°C ± 5°C
Media
Any gases/liquids compatible with 316SS and nickel plated brass
Power: 4 AA Alkaline Cells or 4 AA Ni-Cd Cells, Optional AC
Adaptor, Ni-Cd Charger Available
Size
7 1/2" x 4" x 1 1/2"
Catalog No.
Model
Description
ML200101
NISTPR44
NISTPR45
PPC-3300
—
—
Dual range pressure calibrator with .05% of reading accuracy
Price
$1,995.00
199.00
250.00
Pressure Calibrator Manometer
Rugged, Dust Tight, Water Resistant Housing
SPECIFICATIONS
Ranges
2
2
Key Features
Weight
300 PSI
All Media
3000 PSI
All Media
PSI, in H O, ft H O, cm H O, m H O, in Hg, mm Hg,
cm Hg, mBAR, BAR, kPa, Kg/cm2, TORR, ATM
Zero, Min/Max, Clear, Damp & Hold
14 oz.
NOTE 1
NOTE 2
18°C to 28°C
0 to 18°C and 28°C to 50°C
Engineering Units
2
2
2
H
2
Catalog No. Model
Description
Price
T14030
T140100
T140200
T140300
T1403000
NISTPR44
NISTPR45
Pressure Calibrator Manometer, 30 PSI Range
Pressure Calibrator Manometer, 200" H O Range
$595.00
595.00
595.00
795.00
795.00
199.00
250.00
T140-30
T140-100
T140-200
T140-300
T140-3000
—
—
2
www.davis.com
-14.00 to 30.00 PSIG/PSID
-14.0 to 100.0 PSIG/PSID
-14.0 to 300.0 PSIG
-14.0 to 3000 PSIG
± 200" H O
Resolution
30 PSI - .001 PSI
100 PSI - .01 PSI
300 PSI - .01 PSI
3000 PSI - 0.1 PSI
200" - 0.01 in H O
Accuracy1
± 0.05% F.S. ± 1 LSD
30/100 PSI
-5 PSI to Full Scale
300/3000 PSI
± .05% of Reading ± 2 LSD
Note: for vacuum accuracy is 0.1% of F.S. ± 1 LSD
200"
± 0.1% F.S. ± 1 LSD
Operating Temp
0 to 50°C
Storage Temp
-20 to 60°C
Temp Stability2
0.01% F.S./°C
MAX Overpressure 2x
Ports
Two 1/8" FNPT
Media
30 PSI
Non-Corrosive Gas or Liquids
100 PSI
200"
• High accuracy gauge or
differential capability
• Rugged, dust tight,
water resistant case
• Isolated SS sensors on
300 PSI and 3000 PSI
units
• Easy to read Super-Twist
LCD
• Intuitive controls make
operation easy even for
infrequent users
• Powered by a common 9
volt battery
729
Microprocessor Based Pressure Calibrator
NIST
it
The PPC-9001 Precision Pressure Calibrator is designed to meet the needs of the most demanding field
calibration applications. Its microprocessor design
yields many useful features including a built-in RS-232
port for data transfer to a PC. The PPC-9001 offers a
wide range of pressure media compatibility and a pressure connection manifold which allow secure mounting
of the optional hand pump. The built-in loop power supply along with milliamp or voltage read capability make
the PPC-9001 ideal for calibrating pressure and flow
transmitters.
• 0.05% Full Scale Accuracy
• Microprocessor Based Design
• Compatible with Wide Range of
Pressure Media
• Simultaneous Display of
Pressure vs Milliamps or Voltage
Signals
• Built-in 24 Volt Loop Power
Supply
• Built-in RS-232 Interface
• Optional Hand Pump Attaches as
Pressure Source
• Rugged manifold with three connection ports
• Easy user access to cal. pot.
SPECIFICATIONS
Operating Range
Model
Model
Model
PPC-9001-5
PPC-9001-30
PPC-9001-100
0-5.000
0-30.000
0-100.00
0-138.40
0-830.4
0-2768.0
0-351.5
0-2109.0
0-7030
0-3515
0-21090
0-70310
0-0.3447
0-2.0680
0-6.895
0-0.3515
0-2.1090
0-7.030
0-258.60
0-1551.0
0-5171
0-34.47
0-206.90
0-689.5
mA
0 to 24.000
Volts
0 to 20.000
Accuracy
0.05% ± 1LSD for both pressure and mA/V
Loop Power
24Vdc ± 10% Built-in
Stability
0.01%/°C
0 to 50°C
Storage Temperature -20 to 60°C
Media Compatibility Non-Corrosive Gasses or Liquid
For Corrosive Media Contact the Factory
Connections
Pressure- 1⁄8"FNPT inlet with two, 1⁄8"FNPT fittings
available for optional hand pump or pressure gauge
1
⁄8 A Fuse
Current Overload
Protection
Power
4AA Alkaline Cells or 4AA Ni-Cd Cells
Optional AC adapter, Ni-Cd Charger Available
Size
7" x 3.8" x 1.6"
Ranges
PSI
In H2O
cm H2O
mm H2O
BAR
Kg/cm2
mm Hg
Kpa
Range, Electrical
Microprocessor Based Pressure Calibrator
Ask about
2 Year
NIST
H
730
Save 50%
on 2nd year
recalibration
Pressure
Calibrator
Kit
Catalog No.
Model
Description
ML900150
ML900130
ML900110
ML900111
PPC-9001-5
PPC-9001-30
PPC-9001-100
PPC-9001 Kit
Microprocessor based pressure calibrator, 5psi with case, batteries, test leads & manual
MIcroprocessor based pressure calibrator, 30psi with case, batteries, test leads & manual
Microprocessor based pressure calibrator, 100psi with case, batteries, test leads & manual
Pressure calibrator with hand pump, carrying case, AC adapter, fittings, tools & manual
Price
MECP-100
1001-9V
10077
—
—
Pressure Calibrator Pump
9 volt adapter/charger
Ni-Cd Battery (each) — Requires 4
$1,099.00
1,099.00
1,099.00
1,399.00
Accessories
ML342104
ML342103
ML02
NISTPR44
NISTPR45
295.00
22.00
8.50
199.00
250.00
www.davis.com
Handheld Pressure Calibrator
NIST
Catalog No.
Model
Description
Price
AS10010
ATE-1
ATE-100 Handheld Pressure Calibrator
with datalogging, Hi/Lo alarm relays,
batteries and test leads
$1,230.00
AS10011
ATE Kit 1A
Soft carrying case and AC adapter
125.00
AS10012
ATE Kit 1B
Hard carrying/transport case and AC adapter
150.00
AS10013
—
Extended temperature Operation
-4°F to 120°F (32°F to 120°F standard)
110.00
it
AQS-1 Low Pressure Quick Select Pressure Modules,
Dual Port Gauge
Differential Ranges: 0.25, 0.5 or 1.0 inches H2O Please specify
AS10021
± 0.07% accuracy Pressure Module
1,000.00
AS10022
840.00
Differential Ranges: 2.0, 3.0, 5.0, 10.0, 15.0, 25.0, 50.0, 100, 150 or 200
inches H2O Please specify
AS10024
795.00
AS10025
685.00
Compound Ranges: ± 0.125, ± 0.25 or ± 0.5 H2O Please specify
AS10027
1,010.00
AS10028
890.00
Compound Ranges: ± 1.0, ± 1.5, ± 2.5, ± 5.0, ± 7.5, ± 12.5, ± 25.0, ± 50.0
or ± 100 H2O Please specify
AS10030
840.00
AS10031
720.00
AQS-2 Quick Select Pressure Modules
Pressure Ranges: 5,10,15,30,50,60,100, 150, 200, 250 or 300 psi
Please specify
AS10033
745.00
AS10034
680.00
AS10035
± .025% accuracy Pressure Module
805.00
Pressure Ranges: 500, 600, 1000, 1500, 2000, 2500, 3000, 5000, 6000 or
7500 psi Please specify
AS10036
865.00
AS10037
805.00
AS10038
925.00
Vacuum Ranges: 5, 10 or 15 psi Please specify
AS10040
835.00
AS10041
795.00
AS10042
895.00
Compound Ranges: -5/+ 5, -10/+ 10, -15/+ 15, -15/+ 30 or -15/+ 60 psi
Please specify
835.00
AS10044
775.00
AS10045
895.00
AS310
RTD Interface Module
415.00
AS315
4 wire Pt100 RTD, Probe class A, 12" x 1/4" and
male mating connector for bare RTD wire
275.00
RTD
Accessories
Catalog No.
Description
AS321
Optional Enhanced Accuracy — No additional error due to
temperature over the compensated range
120.00
NISTPR44
NISTPR45
199.00
250.00
The ATE-100 Handheld Pressure
Calibrator measures pressure, flow, vacuum,
leak, current, voltage and change-of-state
for switch testing.
Each system consists of a base unit and one or
two Quick-Select™ pressure modules with pressure ranges from 0.25 inches H2O to 10,000 psi.
Modules can be interchanged quickly and easily
without the use of tools. A standard RS-232 port
allows for computer interfacing.
• Interchangeable pressure and temperature modules
• Pressure measurement accuracies of ± .025, .05, .10% of span
• Supports most standard RTD probes
• Supports thermocouple measurements
• FM Approval or CE Mark
• Optional enhanced accuracy
• Data-logging and cert generation available
• Includes two 9V batteries, test leads, AC adapter and soft carrying case
www.davis.com
AS10043
H
731
Portable Pressure Calibrator
NIST
it
Designed for use in remote locations where AC power is not available, the DPI 603 enables pressure instrumentation to be serviced and calibrated.
The instrument features the capability to generate pneumatic test pressures with an integral
hand-pump up to 300 psi. A volume adjuster provides fine control of the desired test value and a
venting valve enables pressure release without disconnection of the device under test.
An optional pressure/vacuum switching facility can also be provided, which enables the
hand-pump to source vacuum down to -22" Hg or pressure up to 300 psi g.
To facilitate pressure transmitter testing and calibration a 24 VDC power supply is provided and the ability to monitor the current loop from 0 to ±55 mA DC.
For loop verification, the DPI 603 can also output a single 12mA test value, or provide
a passive sink if required.
The clear LCD allows readout of pressure, voltage and current parameters with the
ability to show current or voltage simultaneously with pressure.
• Dual pressure & electrical readout
• Transmitter supply & measurement
• Current loop verification test
• Vacuum generation available
• Accuracy ± 0.075% F.S.
• Integral pressure generation
• Standard ranges up to 300 psig
• 5 digit LCD, multiple engineering units
SPECIFICATIONS
H
732
Pressure Measurement Specification
Operating Pressure
Standard full scale ranges can be specified of
Ranges
-14.7 psig to + 15 psi, + 30 psi, 100 psi or 300psig
Overpressure
The rated pressure can be exceeded by 2 x
causing negligible calibration change, subject
to a maximum safe working pressure of 350 psi
Pressure Media
Fluids compatible with 316 Stainless Steel,
Hastelloy C276, Nylon, Viton and brass
Accuracy
Combined non-linearity, hysteresis an repeatability
± 0.075% F.S. for positive or negative pressures
± 1 digit
Temperature Effects
Over 32° to 105°, the averaged Span temperature
coefficient will not exceed 0.007% of reading/°F.
Digital Indicator
Readout & Display
± 99999 capability, 0.54" LCD digits with additional
16 text characters
Pressure Scale Units
24 scale units are provided
psi, lb/ft2, inHg, inH2O, ft of H2O, (40° and 68°F)
torr, atm, Pa, kPa, MPa, kPa, mbar, bar, kg/cm2,
kg/m2, mmHg, cmHg, mHg, mmH2O, cmH2O,
mH2O, Special 2 units are presented on the display
Display Overload
Instruments are capable of nominal 120% F.S.
Above this, an overrange error code is displayed.
Resolution
± 0.005% F.S. maximum
Response
Nominal rate of three readings per second on the
digital display
Zero Control
Offset correction for pressure and electrical scales
by key-press, protected against accidental use
Calibration Control
Front panel key-pad calibration controls for
pressure and electrical ranges
Negligible
Position Effect
Electrical Specification
Electrical Inputs
Voltage Measurement
Range
± 50V
Accuracy
± 0.15% of reading ± 0.02% F.S.
Temperature Coefficient
± 0.006% reading/°F
Current Measurement
Range
± 55mA
Accuracy
± 0.075% of reading ± 0.005% F.S.
Temperature Coefficient
± 0.006% reading/°F
Electrical Outputs
Voltage output
24V nominal, floating, 25mA maximum
Current output
Loop check fixed 12mA nominal, source or sink
Power Supply
Battery powered 4 x 1.5V zinc carbon “D” cells, 50 hours nominal continuous operation
with no load on output terminals. Battery low condition indicated by display symbol
Safety
IEC
1010
EMC
immunity to IEC 801-804
Certification
CE marked
Physical Specification
Weight
9 lbs
Dimensions
12.6" x 7.7" x 5.0" nominal
Pressure Connection
1/8" NPT female
Carrying Case
Supplied standard and with a complete set of accessories
Catalog No.
Model
Description
DR7750011
DPI 603
DR7750012
NISTPR44
NISTPR45
DPI 603A
—
—
Portable Pressure Calibrator includes hand pump, volume adjuster, vent value, carrying case, batteries, manual,
electrical test leads and NIST Traceable Certificate
Portable Pressure Calibrator with pressure vacuum capability (includes the same accessories as basic unit above)
Price
$1,250.00
1,460.00
199.00
250.00
Dirt Moisture Trap
• Can be used with any
pressure calibrator
• Easy to install
• Low maintenance
• For pneumatic calibrators
• Prevents cross-contamination
Catalog No.
Model
Description
DR6002
IDT-600-2
Dirt moisture trap
Price
$190.00
The IDT600-2 has no diaphragm or other internal components
which could create a pressure drop and does not affect calibration accuracy. The unit is simple to dismantle and easy to clean. It should
be periodically cleaned to prevent excessive contaminate build-up
which may overflow into the calibrator. The top and bottom sections
are simply unscrewed, releasing the transparent chamber which is
then wiped clean.
The IDT600-2 is an effective barrier against the transfer of moisture and dirt from an instrument under test to any portable pressure
calibrator. Installed directly on the calibrator pressure port, regular
use of the IDT600-2 will prevent contamination of the calibrator's
pneumatic system, improve long term reliability and reduce maintenance costs. In addition, it prevents dirt or moisture from one device
under test being transferred to another via the calibrator.
www.davis.com
Precision Portable Pressure Calibrator
NIST
it
Improved Accuracy to ±.025% of reading
The DPI 605 precision pressure calibrator
combines micromachined silicon piezoresistive
and resonating element sensors with the latest
microprocessor technology, features 0.05% of
reading accuracy. It is a totally self contained,
battery powered pressure test and calibration
system. Standard features include electrical
measurement and supply capability, pressure
and vacuum generation, simultaneous displays
of pressure/vacuum and electrical parameters,
extensive data processing and storage capability
and RS 232 interface.
The DPI 605 features an impact resistant,
splash and dust proof NEMA 4X enclosure. All of
the main controls are via a membrane keypad.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Data Log
This enables the DPI 605 to act as data logger
and store up to 10,000 readings. Record and
Replay facilities are included.
• Integral pressure/vacuum
generation
• Barometric accuracy:
± 0.015%
• Voltage/current power
source
• Accuracy: ± 0.05% of
reading
• NEMA 4X sealed case
• Data transfer via RS-232
• Range: -14.7 to 300 psi
• Functions include; peak
readings,switch testing,
data logging, leak testing,
limit setting, data analysis
SPECIFICATIONS
Voltage Measurement
Pressure Measurement Specifications
Operating Pressure Range
Pressure Scale Units
Overpressure
Pressure Media
Transduction Principle
Readout
Display
Display Overload
Resolution
Response
Zero Control
Positive Pressures
Negative Pressures
Temperature Effects
Position Effect
Electrical Specifications
Electrical Inputs
Power Supply
Current Measurement
Electrical Outputs
Voltage Output
Current Output
Analog Output Signal
0 to ± 50 V DC auto ranging, resolution 10µV. Input
impedance 10mΩ. Accuracy ± 0.04% of reading ± 1 digit
including 90 day stability. ± 0.004% of reading/°F
Supplied fitted with Ni-Cad rechargeable pack. Can also
be powered by 6 x D cells, alkaline recommended.
Battery Life: 25 hours nominal for Ni-Cad. 75 hours
nominal for alkaline. External PSU/charger unit supplied
as standard.
0 to ± 55 mA d.c. resolution 0.001mA Internal resistance
nominally 10Ω/ Accuracy 0.03% of reading ± 1 digit
including 90 day stability. ± 0.004% of reading/°F
Programmable floating output in the range 0 to 24 V DC
max 50 mA. Suitable also for current loop energizing and
switch testing.
Programmable output in the range 0 to 55 mA DC for
current display calibrations. Configured as source,
voltage limit 19 V. Configured as sink, voltage limit
maximum 30 V, voltage limit minimum 5V.
Proportional to displayed pressure. Accuracy s display. 0
to 24 V DC with 16 bit (0.001% F.S.) resolution. User
programmable zero and full scale settings. Bandwidth 1
to 2 Hz - updated each new reading. Current output can
also be provided either 0 to 50mA or 4 to 20mA for 0 to
F.S. pressure
Environmental Specifications
Temperature
Sealing
Operating 15° to 100°F Storage 0° to 140°F
Instrument NEMA 4X Battery charger to laboratory
standard.
Electro Magnetic Compatibility Designed to meet BS6667/HD481 and BS6527 / EN55022.
Physical Specifications
Dimensions/Weight
Pressure Connections
Included
5.5 inches z 11 inches x 14.5 inches / 9 lbs. nominal
⁄8 NPT female
Carrying case and a complete set of test leads are included.
1
Catalog No.
Model
Description
DR639301
DPI605
DR639303
DR639304
NISTPR44
NISTPR45
DPI605-E
DPI605-G
—
—
Precision Portable Calibrator Standard instrument includes hand pump, volume adjuster, vent valve,
carrying case, test leads, rechargeable batteries, and charger. Range -14.7 psi to 300 psi gauge
Portable printer for DPI605
Linkpak w/ 4.0-LPDPI
Price
$6,900.00
1,600.00
695.00
199.00
250.00
www.davis.com
H
Accuracy
-14.7 to + 300 psi
Option available for absolute pressures via
Barometric Reference sensor. See Option A
PSI, ft. H2O, in Hg, kPa standard - 23 different scales
under SET-UP, user selectable
To 1.5x causing negligible calibration change
Compatible with most common non-corrosive gasses
Dual, integrated silicon strain gauge sensors. Optional
Barometric Reference utilizes vibrating silicon element.
± 999999 capability on both pressure and electrical
parameters. ± 9999 for ranges below 1.5 psi (FS)
1.5" x 5.2" L.C.D. graphics panel. 240 x 64 pixels. Backlit.
110% F.S. Pressure overrange nominal. Above this the
display flashes.
17 bits (0.00075% F.S.)
2 readings per second nominal
Pressure offset correction by key press Ability under
process key to permit TARE of pressure, voltage and
current, either manual or displayed value.
0.05%, of reading between 1% and 100% F.S. 0.002 psi
below 1% F.S. Figure includes 90 day stability. Combined
non linearity, hysteresis and repeatability (included within
the above accuracy figure).
± 0.025% of reading between 1% and 100% F.S. ± 0.001
psi below 1% F.S.
± 0.025% of reading between -14.7 psi to -3 psi ± 0.001
psi between 0 and -3 psi
-14.7 to 300 psi gauge calibrator over 15° to 100°F the
averaged temperature coefficient ± 0.0012% of reading/°F
Negligible
733
Portable Pressure Calibrators
Pneumatic, Hydraulic and Low Pressure Differential
Pneumatic Calibrator DPI 610/615PC
Hydraulic Calibrator DPI 610/615HC
DPI 610/615 LP Series
Electrical Inputs
Input
Voltage*
Accuracy
± 0.05%Rdg. ± 0.004%FS
Resolution
100µV max
Remarks
Autoranging, >10MW
± 0.05%Rdg. ± 0.004%FS
± 2°F
—
0.001mA
0.2°F
—
10ohm, 50V max.
Local ambient
5mA whetting
Range
Accuracy
10Vd.c.
± 0.1%
24Vd.c.
± 5%
Current*
0 to 24mA
± 0.05%Rdg. ± 0.1%F.S.
*Temperature coefficient ± 0.004% reading/°F w.r.t. 68°F.
Resolution
—
Remarks
Max. load 10mA
Max. load 26mA
—
Current*
Temperature
Switch
Range
± 50Vd.c.
(± 30Vdc IS version)
± 55mA
15° to 105°F
Open/Closed
Electrical Outputs
Output
Voltage
0.001mA
Special Features
Pressure units
mA step
H
734
25 scale units plus one user defined.
Continuous cycle at 10 sec intervals.
Function
mA Output
4 to 20mA linear
4
8
12
16
20
—
—
0 to 20mA linear
0
5
10
15
20
—
—
4 to 20mA flow
4
5
8
13
20
—
—
0 to 20mA flow
0
1.25
5
11.25
20
4 to 20mA valve
3.8
4
4.2
12
19
20
21
mA ramp
Continuous cycle with configurable end values and 60 sec travel time.
Data log
Multi-parameter with internal memory for 10,000 values. Variable sample period or log on key press. (615:
log on key press for calibration results)
Snapshot
Paperless notepad. Stores up to 20 complete displays.
Computer interface
DPI 615 Bidirectional for downloading procedures and uploading results.
Process functions
Tare, max/min, filter, flow, % span.
Language
English, French, German, Italian, Portuguese and Spanish.
Power management
Auto power OFF, auto backlight OFF, battery low indicator and status on key press.
Display
Panel
Readout
2.36 x 2.36 inch graphic LCD with backlight.
± 99999 capability, 2 readings per second.
Environmental
Calibrated Temperature
Humidity
Sealing
Conformity
Physical
Power supply
15° to 120°F
15° to 105°F
0 to 90%, non-condensing.
Generally to NEMA 12 (IP54)
EN61010, EN50081-1, EN50082-1, CE marked.
7.7 lb, 11.8 x 6.7 x 5.5 inches
6 x 1.5 V 'C' cells, alkaline (up to 65 hours nominal use at 68°F rechargeable battery pack and charger
are supplied as standard (20 hours nominal use).
• Ranges vac to 10,000 psi,
multi-rangeable
• Accuracy from ± 0.025% Full Scale
• Fully documenting with RS 232
• Generates Pressure and Vacuum
• Dual Readout: Input and output
Pneumatic Calibrator
DPI 610/615PC
• Pressure/vacuum pump -22 inHg
to 300 psi capability
• Volume adjuster Fine pressure
adjustment
• Release valve Vent and controlled
release
• Pressure port - 1/8 NPT (female)
• Media - Dry, non-corrosive, nonconductive gasses compatible with
316 stainless steel, Hastelloy
C276, BUNA-N and nylon
Hydraulic Calibrator
DPI 610/615HC
• Priming pump - Feeds from
external source
• Shut-off valve - Open for system
priming
• Screw press - 0 to 6000 psi
capability
• Pressure port - 1/8 NPT (female)
• Media - Demineralized water
and most hydraulic oils
DPI 610/615 LP Series
• Release valve - Vent and
controlled release
• Pressure port - 1/8 NPT
(female)
• Media - Dry, non-corrosive, nonconductive gasses compatible
with 316 stainless steel,
Hastelloy C276, BUNA-N and
nylon
www.davis.com
NIST
it
Portable Pressure Calibrator DPI 610
This self-contained, battery powered package contains a pressure generator, fine pressure control, device energizing and output measurement capabilities, as well as facilities for 4-20 mA loop testing and
data storage. The rugged design sealed generally to NEMA 12 (IP54) is ergonomically designed such that
the pressure pump can be operated and test leads connected without compromising the visibility of the
large dual parameter display. The mA step and ramp outputs and built-in continuity tester extend the
capabilities to include the commissioning and maintenance of control loops.
Fully documenting version DPI 615
The DPI 615 provides error analysis for field reporting of calibration errors and pass/fail status. In addition, procedures downloaded from a PC automatically configure the PDI 615 to pre-defined calibration
and test routines.
DPI 610/615 LP Portable Low Pressure Calibrator
Incorporates a precision low-pressure sensor and pneumatic generation to provide a fully self-contained portable low-pressure calibrator.
The DPI 610/615 can be easily configured for dedicated tasks. For example: P-I task sets the calibrator
to source pressure and measure mA, P-Display talk allows indicator readings to be manually entered and
recorded, for example when checking devices such as Magnehelic gauges.
Catalog No.
Model
Description
Price
DR639108
DPI 610PC
Portable Digital Calibrator, 5 psi
$ 2,595.00
DR639109
DPI 610PC
2,595.00
DR639110
DPI 610PC
2,595.00
DR639111
DPI 610PC
2,595.00
DPI 610 PC models includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack and charger, 25 user selectable scales as standard,calibration certificate,
manual and electrical leads.
DR639113
DPI 610HC
High Pressure
3,650.00
DPI610HC standard instrument fitted with hydraulic pump, reservoir and screwpress and supplied with carrying case, rechargeable battery
pack and charger, calibration certificate, manual and electrical leads. 25 selectable scales as standard.
Specify Range: 1000 psi or 6000 psi
DR639114
DPI 610LP
Low Pressure
3,695.00
DPI 610LP includes coarse and fine volume adjuster, vent valve, auto zero equalization,carrying case, test leads, 1/8” ID hose, a manual pressure/vacuum squeeze pump and 1/8” ID hose ”T” connector, calibration certificate, user guide, rechargeable batteries and charger. 25 selectable scales as standard.
Specify Range ±1, ±5, ±10, ±20, ±30 and ±60 in H20
DR639123
DPI 615PC
Portable Digital Calibrator
3,200.00
DPI 615PC includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack and charger, calibration certificate, manual, electrical leads and 25 user selectable
scales as standard.
Specify Range: 5, 30, 100, and 300 psi gauge
DR639124
DPI 615HC
High Pressure Calibrator
4,500.00
DPI 615HC fitted with hydraulic pump, reservoir and screwpress and supplied with carrying case, rechargeable battery pack and charger, calibration certificate, manual, electrical leads and 25 user
selectable scales as standard.
Specify Range: 3000 psi or 6000 psi
DPI 610PC, HC, LP Standard Options
A022
191-129
Rechargeable battery pack (110Vac) & charger (P/N 191-A023)
Universal charger
110.00
75.00
Remote pressure sensors
DR639115
DA200-A145
1 and 2.5 psi gauge
DR639116
—
5 to 500 psi gauge or absolute
DR639117
—
1000 to 10,000 psi sg or abs
DR639118
DA2200-A148
1 and 2.5 psi differential
DR639119
—
5 to 500 psi differential
(Minimum of one Option B2 required per DPI 610 when ordering remote sensors)
DR639120
LPE 9400
Low pressure remote sensor with low pressure hand pump, adapters, hose and
carrying case. (Minimum of one option B2 required per DPI 610/615 when ordering
remote sensors)
Specify Range: ±1, ±5, ±10, ±20, ±30 and ±60 in H20
DR639121
(B2)
Mating cable for remote sensors (P/N IA2405-06-I-VO)
DR639122
(B3)
Remote pressure sensor (150mV max.)
DR639304
LPDPI
Linkpak-W software
DR639211
860-116
Spare carrying case 860-116
IDT 600-2 Dirt Moisture Trap
Accessories
NISTPR44
NISTPR45
NISTPRQ44
NISTPRQ45
—
—
—
—
995.00
795.00
995.00
1195.00
995.00
1195.00
85.00
Add 140.00
695.00
50.00
190.00
199.00
250.00
298.00
375.00
www.davis.com
DR191022
DR639112
H
735
Pressure/Vacuum Calibrators
NIST
it
Pressure Calibrator Vacuum to 15,000 psi with 0.025% accuracy
• Voltage and current measurement and sourcing
• Optional software — Windows™-based SICAL software available for
remote operation and data transfer
• RS232 communication link
• Pressure switch test
• Leak rate measurement from 1 second to 999 days
• Display hold capability
• Simultaneous display (pressure & electrical units)
• Adjustable resolution
SPECIFICATIONS
Accuracy
Units
Display
Resolution
Power Supply
Battery Life
Calibration Medium
Connections
Weight
Certification
H
736
Catalog No.
PC6-PRO-2-I-3-P
PC6-PRO-10-I-3-P
PC6-PRO-20-I-3-P
PC6-PRO-350-I-3-H
PC6-PRO-700-I-3-H
PC6-PRO-1000-I-3-H
PC6-PRO-2-C-3-P
PC6-PRO-10-C-3-P
PC6-PRO-20-C-3-P
PC6-PRO-350-C-3-H
PC6-PRO-700-C-3-H
PC6-PRO-1000-C-3-H
PC6-IS-2-C-3-P
PC6-IS-10-C-3-P
PC6-IS-20-C-3-P
PC6-IS-350-C-3-H
PC6-IS-700-C-3-H
PC6-IS-1000-C-3-H
NISTPR44
NISTPR45
0.025% FS
32 to 104°F (0 to 40°C)
PSI, bar, “H20, “Hg, mmHg (other units available)
Backlit LCD, 16 character, 2 line
0.01% FS
6V NiCad rechargeable with 110VAC charger
supplied
10 hours (fully charged)
Air, oil, water
7 pc. NPT adapter fitting provided with kits
3.5 lbs (head only)
NIST Calibration Certificate
The PC6 PRO Series of pressure calibrators
utilizes the latest developments in pressure
instrumentation to offer a versatile calibration
instrument in a highly portable package. The
PC6 PRO calibrator head can be supplied by
itself or as a complete kit with pneumatic or
hydraulic pump, NPT fittings, pressure hose
and carrying case.
The compact size of the PC6 PRO does not
compromise functionality. It can simultaneously
display pressure versus voltage, current, date &
time, percentage of pressure, pressure switch
status, temperature, maximum or minimum
values. Data can be logged and stored with time
and date stamping for future reference. Windows
based SICAL software can be linked to the PC6
PRO for remote operation and data transfer.
The base PC6 PRO offers very accurate pressure measurement along with current and voltage
measurement and sourcing for calibration of pressure transmitters. PC6 IS is intrinsically safe.
Description
Complete kit / indicator head
Complete kit / calibrator head
Complete kit / intrinsically safe head
NIST Traceable Certificate for Test Gauges
NIST Traceable Certificate with Data for Test Gauges
Stocked Ranges (any custom range is possible)
-30”Hg to 30 psi
-30”Hg to 150 psi
-30”Hg to 300 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
-30”Hg to 30 psi
-30”Hg to 150 psi
-30”Hg to 300 psi
0 to 5000 psi
0 to 10,000 psi
0 to 15,000 psi
-30”Hg to 30 psi
-30”Hg to 150 psi
-30”Hg to 300 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
Price
$2,305.00
2,305.00
2,305.00
3,000.00
3,000.00
3,400.00
2,895.00
2,895.00
2,895.00
3,590.00
3,590.00
3,990.00
3,375.00
3,375.00
3,375.00
4,070.00
4,070.00
4,470.00
199.00
250.00
www.davis.com
Hand Pumps
NIST
it
Pressure or Vacuum, Hydraulic or Pneumatic
• Hand-held pressure or vacuum generation
• Low-cost way to verify performance of
pressure instrumentation
• Rugged and reliable design
• Fine adjustment control
• The most efficient pumps available
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
LTP1
SPECIFICATIONS — HTP1
Pressure Range
HTP1 - 700
HTP1 - 1000
Pressure Media
Weight
Volume
0 to 700 bar/10,000 psi
0 to 1000 bar/15,000 psi
Mineral based hydraulic oil or Distilled water
(‘Skydrol’ and brake fluid available HTP1-S)
3/8” BSP female indication,
1/4” BSP female (process),
1/4” NPT female adapters
3.5 lb.
100cc
SPECIFICATIONS — TP1
Output
TP1-25
TP1-40
Materials
Adjustment
Weight
Output pressure
Output vacuum
0 to 25 bar/360 psi
0 to -0.8 bar/0 to -24”Hg
0 to 40 bar/600 psi
0 to -0.9 bar/0 to -28”Hg
Bright nickel plated brass, clear anodized
aluminum
Fine volumetric pressure/vacuum adjuster
1.5 lb.
SPECIFICATIONS — LTP1
Output Pressure
Output Vacuum
Materials
Adjustment
Catalog No.
HTP1-700
HTP1-700-K
HTP1-1000
HTP1-1000-K
TP1-25
TP1-25-K
TP1-40
TP1-40-K
SI101
LTP1-K
HK1-1000
NISTPR44
NISTPR45
Davis Instruments offers the best selection of
hand-held, portable pumps — suppling pressure
generation with standard fine-tuning adjustments and pressure relief valves. These pumps
are ideal for use with electronic calibrators, digital indicators, analog gauges, pressure transmitters, transducers, relief valves, or similar instrumentation.
The rugged and reliable design of these pumps
and the fine adjustment controls added to their
design provides a low cost way to verify the performance of pressure instrumentation. Pumps can
be purchased independently, or in a kit including
carrying case, NPT adapters, seals and hoses.
The HTP1 hydraulic pump is currently the only
hand pump capable of generating pressure up to
15,000 psi, utilizing hydraulic oil, Skydrol or distilled water. The pump includes a unique high
pressure or priming selector on the scissor action
pump mechanism, making pressure generation
above 5,000 psi easier.
The TP1 pneumatic pump generates pressure
to 600 psi and vacuum to 28”Hg on the same unit.
Made with no plastic parts these pumps are designed to endure harsh environments unlike our
competitor’s disposable models.
The LTP1 pneumatic pump also acts as a dual
source of pressure and vacuum over smaller
ranges making very fine adjustments easier. The
LTP1 range is 25”Hg vacuum to 30 psi, with
0.00145 psi sensitivity.
Description
Hydraulic pump, 10,000 psi
10,000 psi pump kit with carrying case, 7-piece adapter fittings and hose kit
Pneumatic pump & Vacuum, 360 psi to -24 inHg
360 psi to -24 inHg pump & vacuum kit with carrying case, 7-piece adapter fittings and hose kit
Pneumatic pump & vacuum, 600 psi to -28 inHg
Pneumatic pump & vacuum, 30 psi to -25 inHg
15,000 psi hose kit, with NPT adapters
HTP1
Price
$795.00
1,295.00
995.00
1,495.00
395.00
550.00
595.00
750.00
495.00
650.00
295.00
199.00
250.00
www.davis.com
H
Weight
0 to 2 bar/30 psi
0 to -850 mbar/0 to -25”Hg
Bright nickel plated brass, clear anodized
aluminum
Fine volumetric pressure/vacuum adjuster with
0.1 mbar / 0.00145 psi sensitivity
1.5 lb.
TP1
737
Precision Pressure Calibrators and Pumps
System 1
This ready-to-use calibration system includes the Model PPC Indicator
with an T-730, T-740 or T-750 pneumatic hand pump as a precision pressure
source. Units may be supplied with NIST data if required. A 0 to 500 PSI
unit is not available with vacuum pump option.
System 1 - PPC Electronic Pressure Calibrator with Pneumatic Hand Pump
Catalog No. Model
Range
Price
AM760001 76-PPC-0001 0-30 inHg with T-750 Hand Pump
$1,895.00
AM760301 76-PPC-0301 0-30 PSI/0 to 25 inHg (0 to 2.000 bar) with
1,895.00
T-730 Hand Pump
1,895.00
T-740 Hand Pump
1,895.00
T-740 Hand Pump
AM765001 76-PPC-5001 0 to 500 PSI (0 to 35.000 bar) with T-740 Hand Pump 1,895.00
NISTPR44 —
199.00
NISTPR45 —
250.00
System 2:
Hydraulic
Hand pump
System 1:
Pneumatic
Hand pump
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
H
738
System 2
This ready-to-use calibration system includes the Model PPC
Indicator with T-620 hydraulic hand pump as a precision pressure
source. Units may be supplied with NIST data if required.
System 2 - PPC Electronic Pressure Calibrator with Hydraulic Hand Pump
Catalog No. Model
Range
AM762002 76-PPC-20011 0-200 PSI/0 to 25 inHg (0 to 15.00 bar)
with T-620 Hand Pump
AM765002 76-PPC-50011 0-500 PSI (0 to 35.000 bar) with T-620 Hand Pump
AM761002 76-PPC-1K11 0-1000 PSI (0 to 70.00 bar) with T-620 Hand Pump
NISTPR44 —
NISTPR45 —
Price
$1,895.00
1,895.00
1,895.00
1,895.00
2,195.00
2,195.00
199.00
250.00
www.davis.com
NIST
it
Catalog No. Model
Range
Price
AM765003 76-PPC-500111 0-500 PSI (0 to 35.000 bar) with Hydraulic Screw Pump $2,495.00
AM761003 76-PPC-1K111 0-1000 PSI (0 to 70.00 bar) with Hydraulic Screw Pump 2,495.00
AM7630031 76-PPC-5K111 0-5000 (0 to 350.00 bar) with Hydraulic Screw Pump
2,695.00
NISTPR44 —
199.00
NISTPR45 —
250.00
System 3
This ready-to-use calibration system
includes the Model PPC indicator with a
hydraulic screw pump as a precision
pressure source. A screw pump for water
applications is optionally available.
Units may be supplied with NIST data if
required.
System 3:
Screw pump
Catalog No. Model
Range
Price
AM761004 76-PPC-1K1V 0-1000 PSI (0 to 70.00 bar) with Type T Pump $3,995.00
AM762004 76-PPC-2K1V 0-2000 PSI (0 to 140.00 bar) with Type T Pump 3,995.00
AM763004 76-PPC-3K1V 0-3000 PSI (0 to 200.00 bar) with Type T Pump 4,295.00
AM765004 76-PPC-351V 0-5000 PSI (0 to 350.00 bar) with Type T Pump 4,295.00
AM76104
76-PPC-10K1V 0-10,000 PSI (0 to 700.00 bar) with Type T Pump 4,295.00
NISTPR44 —
199.00
NISTPR45 —
250.00
System 4:
Hydraulic pump
System 4
This ready-to-use calibration system
includes the Type T hydraulic pump as a
precision pressure source. A pump for
water applications is optionally available. Units may be supplied with NIST
data if required.
H
The Model PPC Electronic Pressure Calibrators are portable, self-contained instrument designed especially for accurate, convenient calibration of electronic pressure
transmitters, transducers, switches, gauges and other pressure measuring instruments.
The PPC calibrator may be specified with an accuracy of ±0.05% of Full Scale ±1 LSD.
The PPC calibrator consists of a pressure indicator and a user-specified pressure
source.
Catalog No.
Model
Description
Price
The instruAM75030
76-PPC-030
Pressure Calibrator (0-30 PSI)
$1,595.00
ments feature
instant converAM75100
76-PPC-100
1,595.00
sions of pressure AM75200
76-PPC-200
1,595.00
readings to other
76-PPC-500
1,595.00
common units of AM75500
NISTPR44
—
199.00
measure, e.g.,
bar, kPa, in.
NISTPR45
—
250.00
H2O, etc.
www.davis.com
Electronic
Pressure
Calibrator
739
Pressure Calibrators, Handpumps & Test Gauges
Combines the accuracy of a laboratory instrument with the functionality and
portability of a field calibrator
The EPC 2000 Electronic Pressure Calibrator
combines the accuracy of a laboratory instrument
with the functionality and portability of a field
calibrator.
The EPC 2000 Calibrator is used to calibrate
pressure measuring instruments with an accuracy
of ±0.005% of indicated readings from 20-100% of
full scale. The EPC 2000 Calibrator is accurate to
±0.025% of full scale at or below 20% of full
scale.The EPC 2000 calibrator is ideal for difficult
applications such as custody transfer stations, critical process control applications and virtually any
application that requires near deadweight accuracy.
• ± 0.05% Accuracy of reading traceable to NIST
• UL and c-UL Division 1, Class 1, Group C, D and Cenelec EEx ib IIB
T3 (179°C) Intrinsic Safety Approved, CE Mark Compliant
• Modular, Interchangeable Pressure Ranges up to 2,000 psi (135 bar)
• Current, Voltage & Pressure Switch Test Inputs
• 5-Digit Floating Point Readout
• Displays in English, Metric or S.I. units
• Displays mA converted to pressure range and percent difference
• Displays information in English, Spanish, French, German or Italian
SPECIFICATIONS
Pressure
Ranges
Units of Measure
H
740
Media compatibility
Connection
Current Range
Current Format Options
Current Connections
Voltage
Range
Format Options
Connections
Switch Test
Display
Connections
Battery types
Battery life
Standard 9V Lithium
Optional 9V NiCd
Battery Charging Times (Approximate)
120VAC Wall Charger
230VAC Wall (Euro Two Prong) Charger
12VDC Automotive Charger
120VAC Wall Adapter/12VDC Auto Charger
Weight
0-100 in H2O
0-280 in H2O
0-100 psi
0-500 psi
0-1000 psi
0-2000 psi
psi, Torr, atm, kPa, mPa, mbar, bar, mmH2O @ 4°C, mmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, mmHg
@ 0°C, kg/cm2, inH2O @ 4°C, inH2O @ 20°C, inH2O @60°F, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F,
inHg @ 0°C
Any media compatible with 316L stainless steel and Hastelloy C276
0.25-inch female NPT
0-50mA
mA, mA to % mA to pressure
Standard banana jack, 0.75-inch centers
0-50 VDC
V, V to %, V to pressure
shows closing and opening pressures simultaneously
32°F to 122°F (0°C to 50°C)
Two 9V UL-approved Lithium Batteries (standard), 9V NiCd Battery pack (optional)
4 hours at 25°C typical
3.5 hours minimum @ 32°F to 122°F (0°C to 50°C)
12 hours
6 hours
1.5 hours
1.5 hours
2.34 lbs (1.06 kg)
www.davis.com
NIST
it
The T-730 & T-740 testers feature a rugged
pneumatic pump to generate test pressures up to
200 psig for pressure instrument calibration.
This compact, lightweight device can be easily
operated in the field or test stand mounted in the
instrument shop. These testers feature a new extended range vernier adjustment for fine control
of pump pressure.
SPECIFICATIONS
Accuracy
± 0.5% of gauge span
Operating Pressure 200 psig max.
Wetted Parts
Aluminum, brass, stainless steel, nylon® and
Nylatron GS*
“O” Rings
Buna-N
1
Test Connection
⁄4" NPT, 24" long hose
Weight
3 lbs.
Pneumatic Hand Pump
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Model
Description
AM112
AM123
AM126
AM134
AM1461
NISTPR44
NISTPR45
Accessories
AM900201
AM900202
AM620423
AM620424
AM620425
AS10841
AS10842
AS10843
AS10844
AS10845
AS10846
AM620105
NISTPR44
NISTPR45
EPC-1-12/C
EPC-1-23/C
EPC-1-26/C
EPC-1-34/C
EPC-1-46/C
—
—
EPC 2000 Electronic Calibrator 0-100 in H2O Single Range
EPC 2000 Electronic Calibrator 0-280 in H2O and 0-100 psi Dual Range
EPC 2000 Electronic Calibrator 0-280 inH2O and 0-2000 psi Dual Range
EPC 2000 Electronic Calibrator 0-100 psi and 0-500 psi Dual Range
EPC 2000 Electronic Calibrator 0-500 psi and 0-2000 psi Dual Range
NIST Traceable Certificate for Electronic Calibrator
NIST Traceable Certificate with Data for Electronic Calibrator
T730
T-740
136893
47864
47865
1084
1084
1084
1084
1084
1084
T-663
—
—
Pump Only (for range 0 to 30 psi)
3” Test Gauge 0-300” H2O
3” Test Gauge 0-5 psig
Carrying Case
Price
$2,395.00
2,395.00
2,395.00
2,395.00
2,395.00
199.00
250.00
291.00
285.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
136.00
69.00
199.00
250.00
www.davis.com
H
Catalog No.
741
Precision Digital Pressure Calibrator
• Pressure measurement range -29" Hg to 15,000 psi
• Voltage and current measurement
• Software Included
• Simultaneous display of pressure and selected function
• Timed/Event data storage with date & time stamping
• RS232 data communication link
• Pressure switch test
• Leak rate measurement 1 second to 999 days
• Maximum and minimum pressure measurement
• Display hold facility
• Supply output for transducer/transmitter
• Tare pressure offset values
• Pressure module temperature measurement
• Adjustable resolution
• External pressure module (EPM) interchangeability for required
pressure ranges
NIST
it
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
H
742
Model
Range (psi)
Overload Pressure (FS)
Accuracy (FS)
Resolution (FS) Better than
PC6-2-C
-30" Hg to 30 psi
10%
0.05%
0.01%
PC6-10-C
-30" Hg to 150 psi
10%
0.05%
0.01%
PC6-20-C
-30" Hg to 300 psi
10%
0.05%
0.01%
PC6-40-C
0 - 600 psi
10%
0.05%
0.01%
PC6-350-C
0 - 5,000 psi
10%
0.05%
0.01%
PC6-700-C
0 - 10,000 psi
10%
0.05%
0.01%
PC6-1000-C
0 - 15,000 psi
10%
0.05%
0.01%
Other Pressure Ranges are available to special order.
Pressure units
lb/in2, in H2O, in Hg, mm Hg
Overload Warning
Flashing display and audible tone at 110% of FS
Temperature Display
Indicates temperature of pressure sensor module
DC
Input
Range
Resolution
Accuracy
Input resistance
Voltage measurement
mV
0 to 100mV
1 uV
0.05% FS
>1 MΩ
V
0 to 5V
0.1mV
0.05% FS
>1 MΩ
Auto-range
0 to 50V
1mV
0.05%FS
>1MΩ
Voltage Output
Regulated DC supply 10V ± 0.1% max. current 30mA Unregulated DC supply 24V ± 10% max. current 30mA
Display
Backlit LCD, 16 characters, 2 line alpha numeric
Pressure Media
Water, Oil, Non-corrosive gases
Pressure Switch Test
Indicates OPEN or CLOSED
32°F to 104°F
Calibration Temperature
68°F ± 1°F
Calibrated Temp. Range
50°F to 104°F
RS232 Parameters
Baud rate 110, 300, 1200, 2400, 4800, 9600, stop bits 1 or 2, status ON or OFF
Data Capacity
176 records into a maximum of 20 files, 8k memory (additional 204 records, 8k memory option available)
Humidity
5 to 95% relative humidity non condensing
Resolution Select
Increase or decrease by a factor of 10
Power Supply
6V rechargeable battery/110 VAC operation via charger (supplied)
Battery Life/Low Battery
10 Hours full charged/Continuous check, audio and visual warning
Dimensions/Weight
3.6" x 4.3" x 2.4" / 3.5 lbs.
Pressure Connection
1/4" ISO male ‘quick-fit’ (Pneumatic) (NPT fittings provided)
3/8" ISO female ‘quick-fit’ (Hydraulic) (NPT fittings provided)
Catalog No.
Description
SI300
SI301
SI302
SI303
SI304
SI305
NISTPR5
NISTPR6
Pressure Calibrator, -30" Hg (vac) to 30 psi, 1/4" NPT process connection
Pressure Calibrator, 0 to 600 psi, 3/8" NPT process connection
Pressure Calibrator, 0 to 5000 psi, 3/8" NPT process connection
Pressure Calibrator, 0 to 10,000 psi, 3/8" NPT process connection
Price
$2,495.00
2,495.00
2,495.00
2,495.00
2,495.00
2,495.00
85.00
130.00
www.davis.com
Precision Pressure Calibration System
NIST
it
The CAL-PAL® is a portable, self-contained instrument
designed specifically for accurate, convenient calibration of
electronic pressure transmitters, transducers, switches,
gauges, and other pressure measuring instruments. When
used in conjunction with a portable hand held pressure
pump, the CAL-PAL® is a complete, self-contained portable
pressure calibration system.
The CAL-PAL® pressure calibration system measures and
displays applied pressure as well as milliamp output signal
of electronic transmitters or transducers under test. Display
indicates pressure in seven selectable units of measure;
transmitter output signal is shown in milliamps or percentage of 4-20 mA. A unique cycling circuit displays pressure
and transducer output signals at four second intervals.
Pressure switches can be tested using a built-in contact
closure circuit which illuminates an LED indicator.
The CAL-PAL® can also be used as a precision digital test
gauge to measure pressures with a high degree of accuracy.
The calibrator is supplied with two 9 VDC alkaline batteries to provide approximately 40 hours of operation. The CALPAL® comes complete with a cordura carrying case and three
foot test leads.
This compact, rugged, highly accurate, temperature
compensated instrument is ideal for field use.
SPECIFICATIONS
Pressure Range
Model
psi
CP-10
10
CP-30
30
CP-200
200
Current Range
Accuracy
Resolution
Temperature Range
Temperature Effect
Media Compatibility
Catalog No.
Two 9VDC alkaline batteries
Approximately 40 hours
“LOW-BATT” appears on display periodically
H
Model CP-30 CAL-PAL® shown
with optional T-730 hand pump
Approximately 6 7⁄8" H x 33⁄4" W x 2 5⁄8" D
Three pounds
The input pressure connection is a 1⁄4" male NPT
Model
Description
AM900101
CP-10
0-10 psig CAL-PAL® Digital Pressure Calibrator with test leads and soft case
AM900102
CP-30
AM900103
CP-200
Hand Pumps (see page 417 for hand pump specifications)
AM900201
T-730
0-30 psig Low Pressure Pneumatic Hand Pump
AM900202
T-740
0-200 psig High Pressure Pneumatic Hand Pump
NISTPR44
—
NISTPR45
—
Price
$950.00
950.00
950.00
291.00
285.00
199.00
250.00
www.davis.com
Over Pressure
Indication
Over Pressure
Protection
Power Requirements
Battery Life
Low Battery
Indication
Dimensions
Weight
Pressure Connection
In. H2O
In. Hg
Bar
kPa
KG/CM 2
280
20
.70
70
.70
850
60
2.0
200
2.1
5500
400
14
1400
14
0 to 50 milliamps
± .1% of full scale + 1 least significant digit, including linearity,
repeatability, and hysteresis
Four digits with floating decimal point
30 to 130°F (0 to 55°C)
Not greater than .05% of full scale throughout the temperature range
Air, nitrogen, water, natural gas, hydraulic oil, glycol
(consult factory for other media)
“OV-Range” appears on display when pressure
reaches 110% of rating
This gauge is protected by a pre-set relief valve
743
Pressure Calibration Standard
NIST
it
A 0.05% Pressure Standard, totally self-contained with its own 2215 psi pressure source!
• Three independent selectable ranges in each instrument
• State of the art pushbutton calibration guarantees 0.05% accuracy
of each range
• Three different technicians can calibrate the same transmitter and
get identical results...every time!
• Portable—less than 30 pounds
• Adjustable overpressure protection
• Precision pressure vernier control
• Pressure resolution of 0.02% F.S. typical for each range
• Self-contained 2215 psi nitrogen cylinder
• Easy to operate, train in ten minutes
• Voltage/current display mode for transducer testing
• Supplies 24 volt DC loop power
• Quick disconnect fittings and hoses, supplied for input and output
pressure control
• Users include: aircraft manufacturers, national government
laboratories, oil companies, electric power plants (nuclear & fossil)
and general industry
• Calibration Traceable to the National Institute of Standards and
Technology
SPECIFICATIONS
Pressure Ranges
Available Pressure
Calibration
Overall Accuracy
Operating
Temperature Range
Storage
Temperature Range
Relative Humidity
Pressure Media
Pressure Media Filter
Rating
Type
Control Valves
Type
H
744
+ 0-30" Hg, + 0-400" H2O, + 0-100 kPa, + 0-2700" H2O, 0-100 psi
Gauge and Vacuum
± 0.05% F.S. Accuracy of each range. Accuracy statement includes
all effects of linearity, hysteresis, repeatability and ambient tempera
ture.
+ 40 + 1400°F
Ask about
2 Year
NIST
Save 50%
0 to 185°F
on 2nd year
recalibration
95% non-condensing
N2 or Shop Air
7 microns nominal
Field replaceable filter cartridge
Micro-metering with positive shut-off, adjustable stop and
replaceable seat, non-destructible.
Aluminum/Stainless Steel
Material
Internal Piping
5
Tubing
⁄32" Nylon Tubing, 1⁄8" Copper
Fittings
Brass
Test Port
Style
Quick disconnect type.
Pressure Rating
600 psi max, connected or disconnected
Pressure Hose
Quality Supplied
One (1) output
Length
5 feet, nominal
Vernier Control
Volume
0.25 cubic inches
Material
Pressure Limit Monitor Gauge
Size
2.0 inch diameter
Range
160 psi
Pressure Supply Gauge 3000 psi
Regulator
100 psi max.
Construction
Self-relieving, single stage regulator
Internal Pressure Sensor
Type
Bonded, metal foil strain gauge
Sensitivity
3 mV/V, nominal
Construction
Completely welded, sealed stainless steel outer body
and pressure cavity
External Carrying Case
Type
Aluminum Case with cover and carrying handle
Material Thickness
0.090 inch nominal
Finish
Gray Polyurethane baked enamel paint, textured finish
Weight
Less than 30 pounds, including 2 hoses and 1 cable.
Size
10" wide by 16" long x 11.5" high (excluding handles)
Current Display
0-20,000 mA counting by 0.005 mA
Vacuum Converter
Capable of generating 27" Hg vacuum stand alone or 30" Hg with
external vacuum pump
Weight
Less than 30 pounds including oil hoses and cable
Catalog No.
Description
EA55478
Pressure Calibrator, 115 VAC & internal
$6,995.00
rechargeable battery, 2000/1000/400 psi, gage,
LED Display
6,995.00
LCD Display
6,995.00
LED Display
6,995.00
LCD Display
6,995.00
LED Display
6,995.00
LED Display
6,995.00
rechargeable battery, 2000/1000/400 psi, gage
or absolute, LED Display
6,995.00
or absolute, LCD Display
6,995.00
6,995.00
6,995.00
6,995.00
EA61624
EA55819
EA61675
EA56143
EA56382
EA61634
EA61636
EA61680
EA61681
EA61737
EA61739
Price
www.davis.com
Pressure and Vacuum Calibration Standard
NIST
it
One instrument does it all! Calibrate from 30" Hg vacuum to 100 psig pressure
A ±0.05% Pressure Standard, totally self-contained with its own Pressure and
Vacuum source!
• Five independent selectable ranges in
each instrument
• ± 0.05% F.S. accuracy for each range
• State of the art pushbutton calibration!
Guarantees to ± 0.05% accuracy for each
range. No analog potentiometers or adjustments required!
• Three different technicians can calibrate
the same transmitter and get identical
results...every time!
• Easy to operate, train in ten minutes
• Users include aircraft manufacturers,
national government laboratories, oil companies, electric power plants (nuclear and
fossil) and general industry
• Only one box to carry, self contained
enclosure with carrying handles
• Lightweight—less than 30 pounds
• Adjustable overpressure protection
• Precision vernier control
• Display resolution of 0.02% F.S. typical for
each range
• Self-contained nitrogen cylinder and vacuum converter provides 27" Hg (without
external pump) to 100 psi
• Traceable to the National Institute of
Standards and Technology
• Voltage/current display mode for
transducer testing
• Quick disconnect fitting and hose supplied
for output connection
SPECIFICATIONS
Pressure Ranges
Available Pressure
Calibration
Overall Accuracy
Material
Internal Piping
Tubing
Fittings
Test Port
Style
Pressure Rating
Pressure Hose
Quality Supplied
Length
± 0.05% F.S. Accuracy of each range. Accuracy statement includes
all effects of linearity, hysteresis, repeatability and ambient tempera
ture.
+ 40 + 1400°F
0 to 185°F
95% non-condensing
N2 or Shop Air
7 microns nominal
Field replaceable filter cartridge
Micro-metering with positive shut-off, adjustable stop and
replaceable seat, non-destructible.
5
⁄32" Nylon Tubing, 1⁄8" Copper
Brass
Quick disconnect type.
600 psi max, connected or disconnected
One (1) output
5 feet, nominal
Vernier Control
Volume
0.25 cubic inches
Material
Pressure Limit Monitor Gauge
Size
2.0 inch diameter
Range
160 psi
Pressure Supply Gauge 3000 psi
Regulator
100 psi max.
Construction
Self-relieving, single stage regulator
Internal Pressure Sensor
Type
Bonded, metal foil strain gauge
Sensitivity
3 mV/V, nominal
Construction
Completely welded, sealed stainless steel outer body
and pressure cavity
External Carrying Case
Type
Aluminum Case with cover and carrying handle
Material Thickness
0.090 inch nominal
Finish
Gray Polyurethane baked enamel paint, textured finish
Weight
Less than 30 pounds, including 2 hoses and 1 cable.
Size
10" wide by 16" long x 11.5" high (excluding handles)
Current Display
0-20,000 mA counting by 0.005 mA
Vacuum Converter
Capable of generating 27" Hg vacuum stand alone or 30" Hg with
external vacuum pump
Weight
Less than 30 pounds including oil hoses and cable
Catalog No.
Model
Description
Price
EA117435
UPC5700BA
AC Power Pressure Standard, LED Diaplay with rechargeable internal battery
$6,995.00
EA117436
UPC5700BB
AC Power Pressure Standard, LCD Display with rechargeable internal battery
6,995.00
www.davis.com
H
Operating
Temperature Range
Storage
Temperature Range
Relative Humidity
Pressure Media
Pressure Media Filter
Rating
Type
Control Valves
Type
+ 0-30" Hg, + 0-400" H2O, + 0-100 kPa, + 0-2700" H2O, 0-100 psi
Gauge and Vacuum
745
Portable Pneumatic Pressure Calibrator
NIST
it
•Gauge Pressure:
Test pressure is applied to the capsule
through the appropriate P connection; the
case is open to atmosphere through S
•Differential Pressure:
High test pressure is applied to the capsule
through the appropriate P connection. Low
test pressure is applied to the case through S
•Absolute Pressure:
through the appropriate P connection and
the case is continuously subjected to full
vacuum through S
•Vacuum:
The capsule is open to atmosphere
through connection P; the case is connected to test vacuum at S
•Positive and Negative Pressures:
through the appropriate P connection and
the case is open to atmosphere through S
H
746
Design and Construction
The Series 6512000 Portable Pneumatic Calibrator is a
pressure-vacuum test stand wholly contained in a carrying
case. The front panel accommodates the precision pressure
gauge, all pressure connections, two air-regulator controls, and
a selector valve. With the selector valve, three different test
pressures can be applied individually to the gauge. A fourth selector setting vents the gauge to atmosphere.
The precision pressure gauge has a Ni-Span C, capsule-type
pressure element which gives excellent temperature stability
and speed of response. An almost frictionless mechanical linkage amplifies capsule movement and transmits it to the pointer. Although highly sensitive
• Calibration of Pressure Transmitters
and accurate, the mechanism
• Calibration of Gauges, Indicators &
is built to withstand the handling normally associated
Recorders
with on-site calibration of
• Calibration of Differential Pressure
pneumatic instrumentation.
Transmitters
A filter on the air supply
keeps oil and moisture out.
• Calibration of Ratio Relay
Two regulators apply known
• Calibration of Typical Stacked
pressures to the devices unDiaphragm pneumatic controller
der test. The connection
block has 1⁄8 inch female-pipe
threaded connections. Small
gauges can be threaded directly into the block; or as with larger instruments, connected by flexible tubing.
The scale contains two sets of calibrations: -100 to 0 to 850
inches of water and -3.6 to 0 to 30.6 psi.
Clear, Accurate Readout
Sharply defined graduations, a 45-inch scale length over
two pointer revolutions, and a knife edge pointer to facilitate
precise readouts. All scale calibrations are individually plotted
and hand marked to produce a dial custom fitted to the pressure element and mechanism of that gauge.
Engineered for Performance
The gauge housing is heavy cast aluminum with a tempered glass dial cover. A built-in pressure-relief valve has a
dumping capacity which protects the case against overpressure to 10 times the maximum pressure rating. A separate
pressure-relief valve protects the capsule mechanism. The
gauge is mounted inside the carrying case on rubber-padded
shock mounts. The carrying case is constructed of strong but
lightweight molded ABS that flexes to absorb shock from impact.
Compact, Built for On-Site Service
The Portable Pneumatic Calibrator weighs only 20 lbs. and
is only slightly larger than an attache case. The easy portability, simple set-up and the versatile capabilities of this unit extends its usefulness for service in the field. Its portability
saves the time and expense of shop calibration.
An Extra Measure of Accuracy
All Portable Pneumatic Calibrators are subjected to rigorous and extensive testing. Each has to perform at better than
the rated accuracy (0.1% of full scale) to be accepted. It’s accurate enough to double as a shop standard.
Calibration Traceable to NIST
Calibration is with primary standards which are directly
traceable to the National Institute of Standards and Technology.
SPECIFICATIONS
Range and
Calibration
Accuracy
Repeatability
Sensitivity
Hysteresis
Readability
Temperature effect
Scale Length
Overpressure
Protection
Maximum Case
Leak Rate
Materials Exposed
to Measured Gas
On the dial, the outer scale reads -100 to 0 to 850 inches of water
with graduations every 1.0 inch; the inner scale reads -3.6 to 0 to
30.6 psi with graduations every 0.05 psi.
0.1% full scale
0.03% of full scale
0.01% of full scale
0.1% of full scale
0.02% of full scale
Maximum is 0.1% of full scale per 10 C change from 25 C
45 inches through 2 pointer revolutions
A pressure relief valve protects the mechanism (capsule);
pressure up to 90 psi will not damage the mechanism or affect
accuracy. A built-in relief valve and a flow restricter protect the
case from pressures up to 10 times the case rating of 35 psig. This
valve is an emergency-protective device only
Will not exceed 1.03 x 10 7 std cc/sec. or 0.018 psi/hr
Capsule system: Ni-Span C; soft solder; brass; 303 stainless steel;
silver solder
Case system: Ni-Span C; brass; phosphor bronze; beryllium
copper, magnesium, nylon®, aluminum, 303 stainless steel; Elgiloy;
soft solder, silver solder, Hypalon
Inlet manifold to pressure gauge: aluminum; brass polyethylene;
copper; steel; glass wool; carbon; Buna N
Gauge Case
Anodized aluminum with tempered glass dial cover
Carrying Case
ABS plastic 171⁄2 in. x 12 in. x 71⁄2 in.
Accessories
6 adapters for 1⁄8" pipe thread to 1⁄4" plastic tubing, 20 ft. of 1⁄4"
OD plastic tubing, instruction book, sheet with summary of
important instructions
Modifications
Other ranges (to 0-100 psi) and other units of calibration including
metric (SI) units, are available at extra cost
Shipping Weight
50 lbs. (20 lbs. net)
Note: Calibrator is for use with non-corrosive gases. It should not be used with liquids.
Catalog No.
Model
Description
Price
WT555600
NISTPR44
NISTPR45
6512000
—
—
Portable Pneumatic Pressure Calibrator
$2,875.00
199.00
250.00
www.davis.com
Digital Pneumatic Calibrator
NIST
it
The MATRIX Digital Pneumatic
Calibrator features high accuracy, compact
design, and a variety of calibration functions. The MATRIX has a digital accuracy of
±0.05% of span. It also incorporates mA and
V inputs, and it has a built-in 24 Volt loop
power supply to simultaneously power a device while reading the resultant current.
The MATRIX is designed primarily for accurate and convenient calibration of pneumatic controls and instrumentation. The
portable design allow for ease of calibration
in the field. In most cases, the device being
checked does not need to be removed from its
service location.
• Portable, easy to set up and connect
• Calibrates pneumatic and electro-pneumatic instrumentation in
service
• High accuracy: ± 0.05% of full scale
• Measures gauge, differential, or absolute pressure by simply changing
connections
• Measures current or voltage at the flip of a switch
• Operates on 115 volts or rechargeable AA batteries
SPECIFICATIONS
Accuracy
Display
Modes of Operation
Measurements)
Power Supply
Air Supply
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Catalog No.
Description
Price
WK001
NISTPR44
NISTPR45
MATRIX Digital Pneumatic Calibrator
$2,295.00
199.00
250.00
Maximum Differential Pressure
Temperature Operating Range
Standard Ranges
Units
PSI
kPa
kg/cm2
inH2O (4 deg C)
inH2O (60 deg F)
cmH2O
mmH2O
BAR
mmHg
mA
Volts
Pressure Calibrators
NIST
Description
TA163771
TA163772
NISTPR5
NISTPR6
0 to 160" Water Calibrator with case
0 to 18 psig Calibrator with case
it
bulb for applying pressure manually
and a precision-machined hand-adjusted valve to hold and relieve the
calibrating pressure. A flexible hose
and a 3⁄16" tube-1⁄4" NPT compression
fitting is supplied for quick and easy
connection to unit being tested.
• Pneumatic Controllers
• Low Pressure Gauges
• Pneumatic Transmitters
• Flow Transmitters
Catalog No. Model
44S369
44S390
—
—
Pressure Ranges
-5 to 30
-34.47 to 206.80
-0.3515 to 2.1090
-138.4 to 830.4
-138.5 to 831.2
-351 to 2,109
-3,510 to 21,090
-0.3447 to 2.0680
-258.6 to 1,551
0 to 24
0 to 20
H
This calibrator allows a technician
to test the output or differential pressure (flow) readings of a pneumatic
instrument with one hand allowing
the other hand to make calibration
adjustments on the instrument being
tested. The calibrator weighs only 8
oz. as compared to 3 or more lbs. for
equipment marketed in kit form or
one made up by the technician from
parts.
The calibrator consists of sphygmomanometer-type (blood pressure)
gauge accurate to 1% with a squeeze
16 x 2 Line Dot Matrix
Gauge, Differential, Vacuum (Pressure
(Vacuum to -5 PSI)
In: 115 volt AC or built-in NiCad batteries
Out: 24 VDC
Maximum input pressure is 90 PSI,
Pressure connections are 1/8" female NPT
90 PSI on P3 port with 35 PSI on S port
0°C to 50°C
Price
$235.00
240.00
85.00
130.00
www.davis.com
747
Low Pressure Calibrators
NIST
it
Highly accurate
Includes:
• Test gauge
• Tubing
• Squeeze bulb
• 1⁄4 " NPT fittings
• Carrying case
Use these portable, low
pressure test kits, to check
the accuracy of differential
pressure recorders, indicators, and transmitters.
Available in three models,
C-100, C-101 and C-102,
these instruments feature
diaphragm actuated 3" diameter 0 to 300" test gauges
that measure inches of water with an accuracy of
±1.5% full scale.
H
SPECIFICATIONS
Catalog No. Model Description
PRESSURE GAUGE
Accuracy
± 1.5% range (44S369), within 1% of range span(44S390)
Range
0 to 300" H2O (all); 0 to 15 psi (Model C-101);
0 to 30 psi (Model C-102)
Pointer
Adjustable, knife edge, black finish
Case
Nickel-plated brass, polished
Window
Glass with polished, beveled edges providing parallax-free
pointer viewing on flat and beveled surfaces
TUBING
Black Rubber; 18" long input, 36" long output (C-101 & C-102)
PRESSURE BULB High volume with integral check and bleed valves
FITTINGS
Quick disconnect with 1⁄4" NPT male and
1
⁄4" NPT female adapters
AM900301
AM900302
AM900303
NISTPR501
NISTPR511
NISTPR5
NISTPR6
C-100
C-101
C-102
—
—
—
—
Price
Low Pressure Kit, 0 to 300" H2O
Low Pressure Kit, 0 to 300" H2O & 0 to 15 psi
Low Pressure Kit, 0 to 300" H2O & 0 to 30 psi
NIST Traceable Certificate for C-100
NIST Traceable Certificate with Data for C-100
NIST Traceable Certificate for C-101 & C-102
NIST Traceable Certificate with Data for C-101 & C-102
Pressure Test Pump
NIST
$394.00
730.00
568.00
85.00
135.00
85.00
130.00
it
10,000 psi/15,000 psi Hydraulic Pressure (oil or water)
748
• Hydraulic Pressure to 10,000 psi/15,000 psi
• Sealed Construction, No Leaks! No Rust!
• Lightweight, hand held and easy to use
• Quick priming and pressure generation
• Vernier fine adjust
• Large see-through reservoir with a capacity
of over 4 oz.
• Compatible with many different liquids. e.g.
mineral oil, distilled water
• 3/8" ISO (NPT provided) female
Catalog No.
Description
SI1700
SI1701
SI1100
SI11000
SI11001
SI11002
NISTPR44
NISTPR45
Hydraulic Hand Pump (0 to 10,000 psi)
Service Kit for HTP1
Hydraulic Hose kit for HTP1 (1/4" NPT female gauge adaptor)
Hydraulic Hand Pump (0 to 15,000 psi)
Service Kit for HTP1
Hydraulic Hose Kit for HTP1 (1/4" NPT female gauge adaptor)
Price
$795.00
75.00
295.00
995.00
75.00
295.00
199.00
250.00
www.davis.com
Pneumatic Hand Pumps
NIST
it
The T-730 & T-740 testers feature a rugged pneumatic pump to generate test
pressures up to 200 psig for pressure instrument calibration. This compact, lightweight device can be easily operated in the field or test stand mounted in the instrument shop. These testers feature a new extended range vernier adjustment
for fine control of pump pressure.
SPECIFICATIONS
Accuracy
Operating Pressure 200 psig max.
Wetted Parts
Nylatron GS*
“O” Rings
Buna-N
1
Test Connection
Weight
3 lbs.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
AM900201
T-730
AM900202
T-740
Optional Gauges
AM620423
136893
AM620424
47864
AM620425
47865
AS10841
1084
AS10842
1084
AS10843
1084
AS10844
1084
AS10845
1084
AS10846
1084
AM620105
T-663
NISTPR5
—
NISTPR6
—
Vacuum Hand Pump
Price
3" Test Gauge 0-300" H2O
3" Test Gauge 0-5 psig
Carrying Case
$285.00
285.00
225.00
225.00
225.00
155.00
155.00
155.00
155.00
155.00
155.00
80.00
85.00
130.00
NIST
it
™
The T-750 tester is a unique vacuum type device for testing and
calibration of vacuum instruments in ranges up to 25" Hg VAC.
This device incorporates the same features as the hydraulic and
pneumatic models; 3" precision test gauge with swivel fitting,
vernier adjustment, shut off valve, pistol grip handle, etc.
H
SPECIFICATIONS
Accuracy
Range
Wetted Parts
“O” Rings
Test Connection
Weight
0 to 25" of mercury vacuum
Nylatron GS
Buna-N
1
⁄4" NPT, 24" long base
3 lbs.
AM9003011
AS199100
AM620105
NISTPR5
NISTPR6
T-750
1084
T-663
—
—
Price
Vacuum Pump (without gauges)
$315.00
3” Test Gauge, 0-30" Hg Vacuum
136.00
Case
80.00
85.00
www.davis.com
749
Hand Pumps and Digital Test Gauge/Calibrator
NIST
it
Duplex Hand Pump
Hydraulic Hand Pump
• Versatile - Self contained pressure source for calibration of gauges
and switches
• Safe - No electrical power or high pressure bottles. Pressure tested to
2x rated pressure
• Accurate — 1/4% full scale with the line of test gauges (optional)
• Adjustable — Precision vernier provides for a wide range of pressure
adjustment
• User friendly — Compact size and light weight
• Easier to use — Low handle force at all pressures
• Rugged — “Industrial strength” construction
Pneumatic Hand Pump with Gauge (sold seperately)
SPECIFICATIONS
H
Model
Pressure Range
Weight
Dimensions (w/o Test gauge)
Test Connections
Materials of Construction
- Hose
- Seals
8110-300
8111-300
8112-3000
0-300 psig
0-300 psig/0-25" Hg Vac
0-3000 psig
1.3 lbs. (0.6 kg)
1.4 lbs. (0.65 kg)
1.75 lbs (0.79 kg)
9.5" L x 5" W x 3" D
10" L x 5" W x 3" D
11.5" L x 5" W x 3" D
1/4" NPT female
1/4" NPT female
1/4" NPT female
Machined aluminum body, stainless steel shaft and needle valve, ABS plastic handles, brass connection tee and connector
Nylon
Nylon
braided metal
Viton
Viton
Viton
Viton is a registered trademark of DuPont Dow Elastomers
750
Catalog No.
Model
TD100
8110-300
TD2000
8112-3000
TD1000
8111-300
Optional Digital Test Gauges/Calibrators
D6551415
65514-15B55
D6551421
65514-21B55
D6551423
65514-23B55
D6551426
65514-26B55
D6551427
65514-27B55
D6551429
65514-29B55
D6551432
65514-32B55
D6551433
65514-33B55
D6551435
65514-35B55
NISTPR5
—
NISTPR6
—
Description
0-300 psig Pneumatic Hand Pump (without Test gauge)
0-3000 psig Hydraulic Hand Pump (without Test gauge)
-13.7-300 psig Duplex Hand Pump (without Test gauge)
Digital Test Gauge/Calibrator, -14.7 Hg Vac-15 psig
Price
$400.00
675.00
570.00
595.00
595.00
595.00
595.00
695.00
695.00
695.00
695.00
745.00
85.00
130.00
www.davis.com
Hydraulic Pump Calibrator & Fittings
NIST
it
SPECIFICATIONS
Accuracy
Test Fluid
Petroleum based oils,
hydraulic fluids
Operating Pressure 3000 psi maximum
Wetted Parts
Aluminum, brass, stainless steel
and Lexan
“O” Rings
Buna N
Reservoir Capacity 1 pint
1
Test Connection
Weight
3.5 lbs.
AM620101
AS10851
AM620421
AM620422
AM620105
NISTPR5
NISTPR6
T-620 Hand-Held Hydraulic Pump
1084
0 to 1000 psig Gauge
161956 0 to 2000 psig Gauge
Accuracy ± 1.0% FS
161957 0 to 3000 psig Gauge
Accuracy ± 1.0% FS
T-663 Carrying case
—
—
with Data
Price
$230.00
136.00
136.00
136.00
80.00
85.00
130.00
• Lightweight-ideal for field use. Handy carrying
case available
• Handle permits convenient test stand mounting
• Needle valve for positive shut off
• Pistol grip handle for quick, easy pump action
• Accuracy ± 0.5% F.S. with precision test gauge
• Can be used to calibrate pressure transmitters,
gauges, transducers and other instruments
• All testers provide vernier adjustment for fine
control of pump pressure
Pneumatic Vacuum & Pressure Pumps
NIST
200psig max
Delrin, Stainless Steel, BUNA-N
1
⁄8 " FNPT
9 1⁄2 " length by 1 1⁄2 " diameter
O-Ring Repair Kit: 10' x 1⁄8 " OD
Plastic Tubing with (2) 1⁄8 " MNPT
fittings and T-Fitting
Catalog No.
Ask about
2 Year
NIST
Save 50%
Model
Description
Price
AM11810
T-810
Pneumatic Pressure Pump, 0-100 PSI
AM11811
T-811
Pneumatic Vacuum Pump, 0-25 "Hg
NISTPR5
—
NISTPR6
—
Units can only be NIST Certified if gauge is purchased along with pump.
$239.00
239.00
85.00
130.00
on 2nd year
recalibration
www.davis.com
H
These economical, lightweight pneumatic handpumps
generate test pressures up to
100 psig for pressure instrument calibration and vacuum
to 25 "Hg. This compact, lightweight unit can be easily operated in the field and can be
stored in a briefcase. The pump
is used by connecting 1⁄8" OD
plastic tubing to the pump and
the other end to a reference
gauge and the instrument under test. This tester features a
fine-tuning vernier adjustment
for resolution within 1" H2O
and a thumbscrew bleed valve
which allows rapid or very
gradual venting of pressure.
SPECIFICATIONS
Operating Pressure
Wetted Parts
Test Connection
Size
Options
it
751
Pressure Calibrator
NIST
it
Robust, Portable and Accurate Pressure Calibration up to 10,000 PSI
The PC700 offers precision pressure calibration
in any environment. With the PC700, test pressure is easily generated by the built-in hydraulic
pump and is read from a four-digit LCD display.
Simply pump up to the desired pressure, fine tune
with the integrated verneir valve, and compare
your test instrument to the digital display.
The PC700 is an obvious choice for all of your in
situ pressure calibration needs. It utilizes a special thin film strain gauge transducer with built-in
temperature compensation. Because the thin film
strain gauge is about 1/12 the thickness of a bonded strain gauge, it’s more flexible. Therefore, accuracy, long-term stability, fatigue, and product life
are all improved. Unlike some other pressure
calibrators, accuracy is maintained when decreasing pressure, which makes it ideal for verifying
hysteresis. All units are calibrated in positive as
well as negative direction.
FREE Windows™ based PRE-CAL software can
be interfaced with the standard RS232 port for
semi-automatic calibrations and record keeping.
• Accuracy and stability. High accuracy, to 0.05% due to improved
thin film strain gauge transducer
• Reliable, rugged design. Built for reliable performance under the
most severe conditions
• Portable. Light-weight, with no fragile reference gauges
• Semi-automatic calibration with FREE PRE-CAL Windows™-based
software
SPECIFICATIONS
Pressure range
Accuracy
H
752
Temperature comp
Temperature drift
Temperature range
Test connection
Power supply
Hours of operation
Weight
Interface
Oil volume
Delivery
Catalog Number
PC700-1K-0.05%
PC700-2k-0.05%
PC700-3k-0.05%
PC700-5k-0.05%
PC700-10k-0.05%
0 to 700 bar/ 0 to 10,000 psi
0.05% FS combined non-linearity, hysteresis
and repeatability
0 to 50°C
± 0.02% FS
-10 to 50°C
1/4” BSP Female
One 9 volt battery
80 hours
17.5 lbs
RS232
0.5L
Carrying case, fittings, calibration certificate,
Pre-Cal software and instruction manual
Description
Pressure calibrator, PC700, 1000 PSI, 0.05% accuracy
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Price
$4,580.00
4,580.00
4,580.00
4,580.00
4,580.00
www.davis.com
Deadweight Test Kits
NIST
it
The Model RK is a self-regulating
pressure standard designed for use in
ranges from 4" H2O through 300 psig.
An integral weight storage compartment for ranges to 50 psig or
equivalent is contained in a cast metal base which houses the workings of
the unit (additional weights for
ranges above 50 psig or equivalent
are packaged in a separate carrying
case).
The tester comes with a carrying
cover of high strength impact-resistant material. The tester base includes a built-in mounting to fit most
standard photographic type tripods.
SPECIFICATIONS
Accuracy
Catalog
No.
Model
Range
AM900401
AM900402
AM900403
AM900404
NISTDW3
RK-300WC-SS
4-314' H2O
RK-1600WC-SS 4-1614" H2O
RK-100-SS
1-101 psi
RK-300-SS
1-301 psi
Minimum
Increments
1" H2O
1" H2O
1 psi
1 psi
Price
$4,630.00
5,626.00
4,673.00
6,258.00
595.00
± 0.5% of indicated reading. Stainless steel weights;
calibrated for international standard gravity 980.665 Gals.
(cm/sec2) or user's local gravity
Repeatability 0.005% of output reading
Temperature 0.00167% of output pressure per °C, based on 23°C
Coefficient
Supply
Instrument quality air per ISA Quality Standard S
Pressure
7.3. Maximum: 450 psi Minimum: 30 psi or 150% of output
pressure, whichever is greater
Flow Rate
1 SCFH at 4" H20 output, 60 SCFH at 300 psi output
Case Size
Tester: 15" x 9.5" x 8", Weights: 8.5" x 12" x 11.5"
Total Weight Tester: 18 to 31.5 lbs., Weights: 17.5 to 61.5 lbs.
1
Input & Output Connections
⁄8" NPT female
Optional Accuracy Available
.025% and .015%
Portable Pressure Tester
NIST
it
The Model PKII is a self-regulating, portable,
primary type pressure standard designed for use
in ranges from 4" H2O through 30 psi. The PKH is
self-contained in a rugged plastic case designed
for “closed-case” operation, eliminating wind problems. The weights are stacked in foam pockets in
the case for convenient handling. Additional space
is provided in the case and cover for accessory
equipment and tools.
H
Accuracy
± 0.05%; optional accuracy .025% and .015% of indicated reading.
Stainless steel weights. Calibrated for International Standard Gravity
980.665 Gals. (cm/sec2) or user's local gravity.
± 0.5%, with non-magnetic die cast alloy weights available as an economical alternative in non-corrosive environments. Calibrated at U.S. Mean
Gravity 980.000 Gals. (cm/sec2)
Repeatability .005% of output reading
Temperature .00167% of output pressure per °C, based on 23°C
Coefficient
Supply
Instrument quality air per ISA Quality Standard S7.3.
Pressure
Maximum: 100 psi. Minimum: 30 psi or 150% of output
pressure, whichever is greater
Flow Rate
1.0 SCFH at 4" H2O output, 11.0 SCFH at 30 psi output
Case Size
13 1⁄8" x 9 1⁄4" x 6 3⁄8" on 4"-104" H2O and 4"-254" H2O
testers, and 13 1⁄8" x 8 1⁄4" on 4"-854" H2O testers.
Total Weight 14 to 23 lbs. (1⁄4" tube fitting)
Catalog
No.
Model
Range
Minimum
Increment
AM900501
AM900505
NISTDW2
NISTDWQ2
PKII-30-SS
1-30 psi
1 psi
PKII-304-WC
4-304 "w.c.
1" water
Price
$4,434.00
3,929.00
495.00
742.00
www.davis.com
SPECIFICATIONS
753
Precision Deadweight Tester
H
754
Ashcroft Model 1305D deadweight testers provide an easy means of precisely generating pressure to an accuracy of 0.1% of reading. 1305 units
are available for operating ranges up to 10,000
psi. They are ideal in use of calibrating, setting,
testing, and repairing pressure measurement and
control devices. Each 1305D unit is traceable to
the National Institute of Standards and
Technology assuring instrument accuracy.
These pressure systems are designed to be field
portable. A single carrying case holds the pressure
generation pump as well as the necessary tools
and accessories. A second box contains the weights
used for pressure generation (10,000 units require
2 boxes of weights).
Ashcroft deadweight testers qualify as primary
standards for pressure calibration.
The pump is a two-stage hydraulic pressure
generator. A built-in shuttle valve allows for rapid
pressure increase at low pressures. The rate of increase, at pump cycle, can be reduced at higher
pressures in order to minimize resistance. This is
accomplished by simply repositioning the two po-
NIST
it
sition shuttle valve. With
the shuttle valve in the
Ask about
high pressure position,
2 Year
increasing pressure even
NIST %
when near the 10,000 psi
Save 50
upper limit can be quickly
on 2nd year
and easily accomplished.
recalibration
Final, precise adjustment
is accomplished through
the use of an integral
vernier adjustment knob.
The 1305D is provided
with two piston cylinder
assemblies: A low pressure piston for pressure
ranges from 15 to 2000
psi and a high pressure
unit for pressures from 75
to 10,000 psi. The high
pressure piston has an
area of 1⁄80th of a square
inch while the low pressure piston has an area of
1⁄16th of a square inch.
Weights are provided for
pressure increments of 5,
10, 20, 25, 40, 50, 100,
200, and 500 psi (depending on piston in use). An
optional 1 psi incremental weight is also available. Ashcroft 1305D
testers can be used anywhere within their operational range without any change in accuracy. The
same weights are used with both piston and cylinder assemblies.
The 1305 units are available for psi, bar, kg/cm2
and kPa ranges. Each unit comes complete with a
hand jack set (for removal of pointers on gauges
being calibrated), spare O-rings and all tools,
accessories and fittings required for normal use.
• O-Ring material
1305D-Buna-N (D series)
1305DH- Ethylene propylene
(DH series)
• Stainless steel piston and
cylinder material
• Non-magnetic die-cast zinc
alloy weight material
• Reservoir volume approximately 1.5 pints (0.7 liter)
• Accuracy of 0.1% of reading
• Operating pressure of 15 psi
to 10,000 psi
(100 kPa to 70,000 kPa)
• Operating media
1305D — SAE 20 weight
automotive or machine oil
1305DH — Phosphate or
glycol based hydraulic fluids
• Traceable to NIST
Catalog No.
Model
Description
Pressure Range
Low
High
AS130200
1305D-10
Deadweight tester
15-200psi
75-1000psi
$2,985.00
AS130201
1305D-20
Deadweight tester
15-400psi
75-2000psi
3,125.00
AS130202
1305D-30
Deadweight tester
15-600psi
75-3000psi
3,205.00
AS130203
1305D-50
Deadweight tester
15-1000psi
75-5000psi
3,310.00
AS130204
NISTDW4
1305D-100
—
Deadweight tester
15-2000psi
75-10,000psi
4,060.00
545.00
Price
www.davis.com
Hydraulic Deadweight Testers
NIST
it
Kit includes:
• Weight Set
• Pump
• Tool Set
• Carrying Case
These hydraulic deadweight testers offer superior accuracy for the calibration of gauges,
recorders and indicators. The accuracy is ±.01% of
indicated value and is traceable to NIST.
Type T
For use with distilled water or other fluids compatible with 300 series stainless steel or monel.
Suspended weights of a hard, non-magnetic die
cast alloy. Type T oil models are for use with oil as
hydraulic fluid
• Hand operated hydraulic pump,
with manual dual volume control
valve, delivers high volume to
rapidly build pressure and low
volume for ease of pumping and
a gradual approach to the point
of calibration
• Suspended weights-suspended
on a carrier tube to lower center
of gravity and reduce side thrust
on the measuring piston and
cylinder assembly
• Re-entrant type measuring piston and cylinder assembly-maintains accuracy as test pressures
increase. Piston/cylinder assembly is completely enclosed in a
unique column design, reducing
the possibility of accidental
damage
• Pressure vernier-Auxiliary
screw type piston permits fine
adjustment of pump pressure
Accuracy Standard-± 0.1% of indicated pressure traceable to NIST.
Calibration to ± 0.025% is available with data furnished
certified traceable to NIST. Calibration data is determined by
cross floating against a laboratory standard traceable to NIST.
Test Fluid
Type T-distilled water and/or oil
Operating Pressure Type T-15,000 psi max.
Wetted Parts
Type T-300 series SS and Monel
O-Rings
Standard-Buna N; Optional-Viton®, EPT
Test Connections
Union type- 1⁄4" NPT, 1⁄2" NPT, 7⁄16"-20 UNF
male and female)
Weights
55 lbs.
Dimensions
Overall operating dimension31 1⁄4" long x 9" wide x 19 3⁄4" high max.
Reservoir Capacity
75 cubic inches
Approximate Weight Tester & Carrying Case: 50 lbs.
Weight Sets
#1: 55 lbs., #2: 110 lbs., #3: 165 lbs.
Catalog No. Model
Ranges
AM900990
Type T-50
AM900992
Type T-100
AM900994
Type T-150
NISTDW4
—
100 to 500 psi
5 psi
$3,765.00
100 to 5000 psi
50 psi
100 to 1000 psi
5 psi
4,238.00
100 to 10,000 psi 50 psi
100 to 1500 psi
5 psi
4,762.00
100 to 15,000 psi 50 psi
Increments
Price
www.davis.com
SPECIFICATIONS
H
755
Pneumatic Deadweight Testers
The floating ball deadweight tester is a highly
accurate primary pressure standard ideally suited
for portable calibrations. Combining unique design features and ease of maintenance, these instruments are the solution for many applications
including gas measurement.
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Accuracy
H
756
Temperature Range
Instrument Weight
Instrument Dimensions
Starting Pressure
Minimum Weight Increment
Gas Supply
Pressure
Flow Rate
Connection Ports
Inlet
Outlet
Model
0.05%, 0.025%, 0.015% of reading traceable to NIST including linearity,
hysteresis, repeatability, and the reference standard
20 to 140°F
17 lb to 26 lb
14"L x 10"D x 7" H
5 inH2O
5 inH2O
35 psi minimum, 100 psi maximum
0.5-6 SCFH
• Ceramic nozzle and ball enabling
-Wide operating temperature range
-Enhanced cold-weather service
-Reduced temperature sensitivity
(0.00048%/°C)
• 400 psi overpressure protection prevents
internal
damage
• Stainless steel weight carrier for better
stability
• Mass set and weight carrier designed for
convenient
calibration steps
• Stainless steel leveling screws for better
durability
• Exhaust vent discharges outside
instrument case, reducing contamination
• Durable case, allowing operation with the
lid closed to eliminate the effects of drafts
• Ease of maintenance features
-Pipeline liquid contamination can be
removed on-site, avoiding costly returns
and failed site calibrations.
-Air tanks are accessible for cleaning
• Rigid manifold connections prevent
internal damage
• Tripod mountable
⁄4 " NPTF
⁄4 " NPTF
1
1
Pressure
Range
T9000-100
5-100 inH2O
T9000-150
5-150 inH2O
T9000-200
5-200 inH2O
T9000-250
5-250 inH2O
T9000-300
5-300 inH2O
T9000-350
5-350 inH2O
T9000-400
5-400 inH2O
T9000-450
5-450 inH2O
T9000-500
5-500 inH2O
T9000-550
5-550 inH2O
T9000-600
5-600 inH2O
T9000-650
5-650 inH2O
T9000-700
5-700 inH2O
T9000-750
5-700 inH2O
T9000-800
5-700 inH2O
T9000-850
5-700 inH2O
Low Pressure Option
Price
Price
Catalog No. Accuracy 0.05% Catalog No. Accuracy 0.025% Catalog No.
DR9105
DR91505
DR9205
DR92505
DR9305
DR93505
DR9405
DR94505
DR9505
DR95505
DR9605
DR96505
DR95705
DR95750
DR95800
DR95850
DR9100
$3,387.00
3,470.00
3,490.00
3,549.00
3,724.00
3,900.00
4,074.00
4,237.00
4,310.00
4,384.00
4,436.00
4,530.00
4,599.00
4,668.00
4,735.00
4,805.00
714.00
DR91025
DR915025
DR92025
DR925025
DR93025
DR935025
DR94025
DR945025
DR95025
DR955025
DR96025
DR965025
DR957025
DR957501
DR958001
DR958501
DR9100
$3,786.00
3,880.00
3,900.00
3,959.00
4,153.00
4,352.00
4,485.00
4,662.00
4,730.00
4,799.00
4,867.00
4,940.00
5,010.00
5,077.00
5,145.00
5,215.00
746.00
DR91015
DR915015
DR92015
DR925015
DR93015
DR935015
DR94015
DR945015
DR95015
DR955015
DR96015
DR965025
DR957015
DR957502
DR957800
DR9578502
DR9100
Price
Accuracy 0.015%
$4,226.00
4,332.00
4,358.00
4,395.00
4,610.00
4,825.00
4,920.00
5,115.00
5,182.00
5,245.00
5,315.00
5,382.00
5,445.00
5,515.00
5,580.00
5,649.00
805.00
www.davis.com
Pressure Comparators
NIST
it
The comparator is a pressure calibrating system using a source of controllable pressure and a “test” gauge
of known accuracy. “Test” gauges are variously known
as “transfer standard” or “inspection” gauges. The
pressure source is connected to a manifold which directs
pressure equally to the “test” gauge and the instrument
system to be calibrated. The reading on the “test” gauge
is then compared to the indication given by the
instrument system.
• Hand operated hydraulic pump, with manual dual volume control valve,
delivers high volume to rapidly build pressure and low volume for ease
of pumping and a gradual approach to the point of calibration. Test
manifold with pressure vernier for fine adjustment of pump pressure.
• Supplied with four U.S. Gauge 4 1⁄2" Test Gauges
• NIST Certification included
SPECIFICATIONS
Accuracy
(10,000 psi gauges, ± 0.5% of gauge span)
Test Fluid
Type T: Distilled Water and/or oil
Operating Pressure
10,000 psi max.
Wetted Parts
Type T-300 series SS;
O-Rings
Buna N; Optional-Viton®, WPT
Test Connections
Union type 1⁄4" NPT, 1⁄2" NPT, 7⁄16"-20 UNF
(male or female)
Gauge Connections Type T: 9⁄16"-18 UNF-3A
All gauges supplied with union type connections
Operating DImensions 20 5⁄8" long x 11" wide x 16" high
Approximate Weight 55 lbs.
Catalog No.
Model
Range
Price
AM900801
AM900802
AM900803
AM900804
NISTDW7
Type T-3
Type T-3 oil
Type T-3A
Type T-3A oil
—
0 to 160, 600, 5000, 10,000 psi
0 to 160, 600, 5000, 10,000 psi
0 to 30, 600, 3000, 5000 psi
0 to 30, 600, 3000, 5000 psi
$3,592.00
3,592.00
3,487.00
3,487.00
1,250.00
Dual Column Deadweight Testers
NIST
it
SPECIFICATIONS
Accuracy
Standard-± 0.1% of indicated pressure traceable to NIST.
Calibration to ± 0.025% is available with data furnished certified
traceable to NIST. Calibration data is determined by cross floating
against a laboratory standard traceable to NIST.
Test Fluid
Type T
Distilled water
Operating Pressure Type T
15,000 psi max
Wetted Parts
Type T: 300 series SS and Monel
Type R: Aluminum, 300 series SS, carbon steel, brass and Monel
O-Rings
Standard
Buna N
Optional
Viton®, EPT
Test Connections
Union type: 1⁄4" NPT, 1⁄2" NPT, 7⁄16" 20UNF (male and female)
Weight
Type T & R-Hard, non-magnetic cast alloy, NIST certified
.1%; conforming to material requirements of NIST Class Q
H
Catalog No.
Model
AM900901
DM-T-50
10 to 500 psi
5 psig
Dual Range
100 to 5000 psi
50 psig
DM-T-100
10 to 1000 psi
5 psig
Dual Range
1000 to 10,000 psi 50 psig
DM-T-150
10 to 1500 psi
5 psig
Dual Range
100 to 15,000 psi 50 psig
AM900902
AM900903
NISTDW4
Range
Increments Price
$3,487.00
5,267.00
5,803.00
• Separate columns provided for
high and low pressure measuring
piston/cylinder assemblies. Range
changes are done by using a built
in cross over valve
• Kits available to convert standard
T &R testers to dual column
Type DM
• Dual volume pump delivers higher
pressures with minimal effort
• Suspended weights reduce side
thrust on measuring piston/
cylinder assemblies
• Piston and cylinder are completely
enclosed in unique column design
545.00
www.davis.com
757
Digital Pressure Calibrators
NIST
it
™
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
H
758
Accuracy
Temperature Effects
Electrical Inputs
Input
Voltage*
0.025% FS(non-linearity, hysteresis, repeatability)
± 0.002% reading/°F averaged over 15°F to 105°F w.r.t. 68°F
Range
± 50V DC
Current*
± 55mA
Temperature
Switch
Electrical Outputs
Output
Voltage
15° to 105°F
Open/Closed
Accuracy
± 0.05% Rdg.
± 0.004% F.S.
± 0.05% Rdg.
± 0.004%F.S.
± 2°F
Resolution
100µV max
0.001mA
0.1°F
Accuracy
Resolution
± 0.1%
± 5%
Current*
± 0.05% Rdg.
0.001mA
± 0.01%F.S.
* Temperature coefficient ± 0.0075% reading / °C w.r.t. 20 °C
Display
Panel
2.36 x 2.36 inch graphic LCD with backlight
Readout
± 99999 capability, 2 readings per second
Temperature
Operating
15° to 120°F
Calibrated
Humidity
Conformity
Dimensions
Weight
Range
10V DC
24V DC
0 to 24 mA
15° to 105°F
0-90% non-condensing
EN61010, EN50081-1, EN50082-1, CE marked
Including lid:
18.5 x 12.6 x 7.9 inches (LxDxH)
26.4 lbs
Remarks
Autoranging,
>10 MΩ
10Ω,
50V max.
Local ambient
5mA whetting
Remarks
Max. load 10mA
Max. load 26mA
• Ranges up to 10,000 psi
• Accuracy 0.025% FS
• Built-in pressure generation with priming pump
• Data storage with RS232 interface
• Self contained in carrying case with detachable lid
Catalog No. Model
Description
DR55020
DR55140
DR55011
Digital Pressure Calibrator, -14.7 to 300 psi $4,832.00
Digital Pressure Calibrator, 0 tp 2000 psi
4,995.00
Built-in hand pump for CA020 & CA140
729.00
CA020
CA140
—
Price
DR54020
C020/P
Digital Pressure Calibrator, 0 to 300 psi
5,720.00
DR54160
C160/P
5,720.00
DR54350
C350/P
5,720.00
DR54700
C700/P
Digital Pressure Calibrator, 0 to 10,000 psi 5,720.00
DR541000 C1000/P Digital Pressure Calibrator, 0 to 15000 psi
6,025.00
C Series supplied with built-in hand pump for large volume operations as standard
DR53020
DR53160
DR53350
DR53700
DR531000
DR55012
CW020/P
CW160/P
CW350/P
CW700/P
CW1000/P
—
5,995.00
5,995.00
5,995.00
Digital Pressure Calibrator, 0 to 10,000 psi 5,995.00
6,295.00
Dual pressure option for CW Series
1,040.00
hydraulic models
CW Series supplied with built-in hand pump for large volume operations as standard
NISTPR37
NISTPR38
—
—
199.00
250.00
www.davis.com
Positive/Negative Pressure Transmitter/Indicator
NIST
it
SPECIFICATIONS
Accuracy
Temperature Sensitivity
Body
Process Connections
Output Signal
Input Power
Electrical Connection
0.25% B.F.S.L.
.011% / °F
304 SS
1
⁄2" NPT standard; (1⁄4" NPT optional)
4-20 mA; (0-5V or 0-10V optional)
10-30 VDC
4 pin solderless connection (4 wire cable)
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Optional Digital Indicator
Digital Indicator Features
• Easy single button scaling
• Steady, accurate display to
± 199,990
• 41⁄2 Digits + extra zero
• UL Listed
Model
Description
WK33398
WK33397
WK33396
WK33395
WK33394
WK33393
WK33392
8642850
8642885
8643652
8341740
8610007
8342275
8340638
0 to 30" Hg vacuum
0 to 10psi
0 to 100psi
0 to 500 psi
0 to 1000 psi
0 to 3000 psi
0 to 5000 psi
PD885100
PD690-3-N
PD885105
PD690-3-18
NISTPR132
—
NISTPR133
—
For additional digital indicators, Please see page 143
Digital Indicator 117VAC
Digital Indicator 117VAC w/4 relay output & 4-20mA
Price
$415.00
295.00
295.00
335.00
335.00
335.00
335.00
239.00
478.00
99.00
130.00
www.davis.com
H
Catalog No.
• 4 Alarm points with LED status
indication
• NEMA 4 front panel
• Isolated 24V transmitter power
supply
759
Pressure Transmitter/Transducer
NIST
it
Compact Design and Rugged Sensor
Available in ranges from 15 PSI to 15,000 PSI. The transmitter
version provides a 4-20 mA 2-wire output signal. The transducer
version supplies a 0-10 VDC 3-wire output signal. Both signals are
fully conditioned and provide an output that is both linear and proportional to the applied pressure.
The compact design provides a rugged sensor suitable for many
general purpose pressure measurement applications in hydraulics
& pneumatics, press control, compressor control, pump protection
and numerous other monitoring and control options.
SPECIFICATIONS
Input (supply)
Pressure
Range
Maximum
Pressure
Burst
Pressure
4-20 mA
2-Wire
0-10V
3-Wire
0-15 psi
0-50 psi
0-100 psi
0-500 psi
0-1000 psi
0-2000 psi
0-5000 psi
0-10,000 psi
0-15,000 psi
Price
Accessories
ML428271
NISTPR132
NISTPR133
75 psi
245 psi
500 psi
1160 psi
1740 psi
2900 psi
11,600 psi
17,400 psi
21,750 psi
75 psi
245 psi
500 psi
2900 psi
4350 psi
7250 psi
18,850 psi
26,100 psi
43,500 psi
WK40001
WK40002
WK40003
WK40004
WK40005
WK40006
WK40007
WK40008
WK40009
$165.00
WK40010
WK40011
WK40012
WK40013
WK40014
WK40015
WK40016
WK40017
WK40018
$165.00
Process Power Pack 24VDC-175mA
$130.90
99.00
130.00
10-30 VDC
(14-30 VDC for 0-10V output signal)
Output & load limitations
4-20 mA 2-wire
R(max)
= (VS -10V) / 0.02 A
0-10V 3-wire
R(min)
= 5 k Ohm
Accuracy
Linearity (B.F.S.L.)
≤0.5% of span
Hysteresis
≤0.1% of span
Repeatability
≤0.1% of span
1 yr. stability
≤0.3% of span
Response time
≤5 ms
(10-90% full scale)
Temperature compensated
+ 32 °F to 175 °F
Media
-25 °F to 212 °F
Ambient
-25 °F to 175 °F
Storage
-40 ° F to 212 °F
Temperature error (reference temperature 70 °F)
On zero (% of span / °F)
≤0.022
On span (% of span / °F)
≤0.016
1
Process connection
⁄4" NPT male
Electrical connection
DIN 43650 solderless screw terminal
(IP 65 / NEMA 5)
Material
Wetted parts
316 stainless steel
Body material
304 stainless steel
Electrical protection
Protected against reverse polarity,
short circuit output and suppressor
diode for high-voltage protection
Vibration resistance
15 g between 15...2000 Hz
Shock resistance
600 g
Loop-Powered Attachable Digital Indicator
NIST
it
SPECIFICATIONS
H
760
Display Type
Power
Voltage drop
Maximum current
rating
Environmental
Operating
Temperature
Storage
Temperature
Temperature effects
Humidity
Dimensions (inches)
0.4" high LCD Programmable display range:
-1999 to + 9999
Loop Powered - no additional power supply
required
3 VDC
60 mA
+ 32 to + 122°F (0 to 50°C)
-22 to + 176°F (-30 to + 80°C)
0.1% of span per 18°F (10°C)
<90%, non-condensing
1.9 x 1.9 x 1.4 deep
Catalog No.
Model No.
WK90715507
907-15-507
Description
Attachable Loop Powered Digital Indicator
For use with Wika S-10, S-10-3A or
ECO-Trans with full size DIN plug
Does not include 4-20 mA Transmitter shown (see page for 643 transmitter)
NISTPR132
—
NISTPR133
—
Price
$229.00
99.00
130.00
• Attachable liquid crystal display
for local indication
• 4-20 mA current loop-powered
with 3 volt drop
• Installs between transmitter
and DIN 43 650, + full sized
“L” shaped 4-pin connector
• Programmable Range:
4-20 mA can be assigned any
display value within the display
range
• User scalable to display range
from -1999 to + 9999
• Accuracy: ≤ 0.2% of span
www.davis.com
High Accuracy Pressure Transmitters
The K1 transmitter offers
the benefits of polysilicon
thin film performance at affordable prices. Using chemical vapor deposition methods
polysilicon strain gages are
molecularly bonded to a metal diaphragm. This sensor,
combined with the latest
surface mount electronics
promote superior performance in a durable package.
The K1 is designed for use in
many demanding OEM applications including air compressors and refrigeration
controls, hydraulic controls
and other industrial control
applications.
NIST
it
• 0.5% Full scale accuracy
• Voltage or current output
• Superior long term stability and
reliability
• 1-year warranty
• NIST certification included with
0.5% unit, 1.0% optional
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
www.davis.com
H
Accuracy Class (F.S.)
0.5%
1.0%
Non-Lin.
(Term. Pt.)*
± 0.4%
± 0.7%
(B.F.S.L.)*
± 0.25%
± 0.4%
Hysteresis
± 0.15±
± 0.2%
Non-Repeatability
± 0.05%
± .07%
*Including hysteresis
Overpressure (F.S.)
0/150/30000/75000/2000
0/5000
20,000
Proof
200%
150%
120%
Burst
800%
300%
150%
Response Time
Less than 5 ms
Temperature
Operating
-20/+ 180°F
Compensated -20/+ 160°F
Thermal Coefficients (68°F ref.) Standard
0.5%
1%
Zero
± 0.028% F.S./°F
± 0.04% F.S./°F
Span
± 0.028
± 0.04
Materials
Case
300 series stainless steel
Cable
No. 24 AWG, 36" PVC, shielded, vented, UL approved
Diaphragm
17-4 PH stainless steel
Power
10-36 VDC Unregulated,
Requirements
Reverse polarity protected
Supply Current
Less than 3. mA for voltage output
Output Impedance
100Ω
Range
Acc. FS Cat . No. Price
Acc. FS Cat . No.
Price
30” Hg. Vac.
1%
ASK17420 $276.00
—
15 PSIG
1%
ASK174215
261.00
—
30 PSIG
1%
ASK174230
261.00
—
60 PSIG
1%
ASK174260
251.00
—
100 PSIG
1%
ASK1742100 251.00
0.5% ASK1542100 $316.00
150 PSIG
1%
ASK1742150 251.00
0.5% ASK1542150
316.00
200 PSIG
1%
ASK1742200 251.00
0.5% ASK1542200
316.00
300 PSIG
1%
ASK1742300 251.00
0.5% ASK1542300
316.00
1000 PSIG
1%
ASK171000
251.00
0.5% ASK151000
316.00
2000 PSIG
1%
ASK172000
251.00
0.5% ASK152000
316.00
3000 PSIG
1%
ASK173000
251.00
0.5% ASK153000
316.00
5000 PSIG
1%
ASK175000
251.00
0.5% ASK155000
316.00
30” Hg./15 PSIG 1% ASK174215V 276.00
—
30” Hg./30 PSIG 1% ASK174230V 276.00
—
30” Hg./60 PSIG 1% ASK174260V 276.00
—
NISTPR132
99.00
NISTPR133
130.00
Standard output 4-20mA, connection 1/4” NPTM, 36” cable shielded PVC 24 AWG.
* Connection 9/16-Aminco (Female)
761
Pressure Transmitters
NIST
• Low price
• Adjustable zero
• Resistance to pressure
spikes
• Cost effective DIN connector
• Welded stainless steel
construction
Applications
• Hydraulic systems
• Injection molding
• Die casting
• Off road vehicles
• Compressors and pumps
• High volume usage
it
Viatran's Models 247 and 347 are designed for
applications where very rugged yet inexpensive
pressure transmitters are required.
This enables Viatran to provide the advantages
of bonded foil sensing technology at prices typical
of less reliable semiconductor sensors.
The "47" Series is available with pressure
ranges from 0-10 to 0-20K PSI.
The "47" Series has zero adjustment control
that also makes setup fast and easy.
When your application requires a large quantity of rugged pressure transmitters, Viatran's "47"
Series offers the same high quality standards that
you build into your equipment.
SPECIFICATIONS
Full Scale Pressure Range (FSPR)
Non-Linearity (Best Fit Straight Line)
Hysteresis & Repeatability
Full Scale Output (FSO)
Resolution
Long Term Stability
Maximum Operating Temperature Range
Minimum Operating Temperature Range
Electrical
Supply Voltage
Output Signal
H
Mechanical
Pressure Connectors
Proof Pressure
Burst Pressure
10 to 40 VDC
Model 247 0 to 5 VDC
Model 347 4 to 20 mA
1/4" NPT Female
1.5 times FSPR or 25K PSI, whichever is less
5 times FSPR or 30K PSI, whichever is less
Model
Description
Catalog No.
0-10, 0-15, 30, 50, 75, 100, 200, PSIG, PSIA, 0-300, 400
500, 750, 1K, 1500, 2K , 3K, 4K, 5K, 7500, 10K, 15K, 20K, PSIG
≤ ± 0.5% FSO
< .25% FSO
Model 247 5 VDC ± 2% at 70°F
Model 347 16 mA ± 2% at 70°F
Infinite
≤ ± 0.5% FSO pper 6 months
70°F to 170°F
200°F
-20°F
VI247
247G
Pressure Transmitters, choose range below
VI2471
247A
Absolute Pressure Transmitter (≤200 PSI)
VI2472
247V
Vacuum Pressure Transmitter (≤15 PSI) choose range below
VI347
347G
Pressure Transmitter, choose from range below
VI3471
347A
Absolute Pressure Transmitter (≤200 PSI) choose range below
VI3472
347V
Vacuum Pressure Transmitter (≤15 PSI) chooser from range below
Standard Pressure Ranges, please choose code that matches your specific range
Code
Range
Code
Range
Code
Range
AA
0-5
AM
0-100
AW
0-750
AB
0-10
AP
0-200
AY
0-1000
AC
0-15
AR
0-300
AZ
0-1500
AF
0-30
AT
0-400
BA
0-2000
AH
0-50
AU
0-500
BC
0-3000
AK
0-75
762
Price
$180.00
220.00
195.00
180.00
220.00
190.00
Code
BE
BF
BH
BM
BP
Range
0-4000
0-5000
0-7500
0-10K
0-15K
Accessories
NISTPR132
—
NISTPR133
—
NISTPRQ132
—
NISTQ133
—
Other options and accessories available, please inquire.
99.00
130.00
148.00
195.00
www.davis.com
Pressure Transmitter
NIST
it
SPECIFICATIONS
Linearity (BFSL)
0-100 PSI
150-10K PSI
15K - 20K PSI
Hysteresis
Repeatability
Full Scale Output
Resolution
Sensor (Analog to Digital Converter)
Output (Digital to Analog Converter)
Drift
Response Time
Thermal Zero Shift
Operating Temperature Range
Non-Operating Temperature Range
Supply Voltage
Output Signal
Load Impedance
Pressure Connection
0-100 thru 0-15K
0-20K thru 0-50K
Viatran's Model 970, designed specifically for the oil
production industry, features a HART communications
protocol that enables digital communication with the
transmitter. This allows for self diagnostics, the setting, storage, and recall of calibration data, as well as
the efficiency of a multidrop network for multiple transmitters
The HART protocol allows a simultaneous analog
and digital signal transmission.
The "70" Series also features bonded foil strain gauge
sensors. The inherent overpressure protection in this
technology helps to eliminate damage to the sensors
when they are exposed to hydraulic spikes.
0-60K thru 0-100K
0-100, 150, 300, 500, 750, 1K, 1500, 2K,
3K, 5K, 7500, 10K, 15K, 20K, 30K, 40K,
50K, 60K, 75K, 100K PSIS, PSIA
± 0.5% FSO
± 0.2% FSO
± 0.25% FSO
≤ ± 0.1% FSO
± 0.1% FSO
16 mA
18 bits
12 bits
≤ ± 0.25% FSO per 6 months
Analog output response to a step change in
pressure will be from 0.07 sec. minimum to a
36 sec. maximum for one time constant and
is adjustable through software.
≤ ± 1.0% FSO per 100°F
≤ ± 1.0% FSI per 100°F
-40°F to + 190°F
-65° F to + 250° F
7 to 30 VDC
Two wire 4-20mA. Digital process signal
superimposed on 4-20mA signal, available to
any host computer system conforming to
HART protocol.
230 Ω to 1,400 Ω
1/4" NPT(F)
9/16" - 18 gland thread, pressure relieved.
1/4" OD high pressure tube, 60° come.
Conforms to autoclave type F250-C
5/8" - 18 gland thread, pressure relieved.
5/16" OD high pressure tube, 60° cone.
Conforms to autoclave type F312-C150.
• Simultaneous digital/analog communications
• 10:1 rangeability
• Small size and weight
Applications
• Offshore oil rigs
• Oil production platforms
• Natural gas pipelines
• Rig safety systems
Model
Description
VI970
VI971
VI972
VI973
970A970A970S970S-
Absolute pressure transmitter (up to 15K). Please choose range below.
Absolute pressure transmitter (20K and above). Please choose range below.
Sealed gauge pressure transmitter (up to 15K). Please choose range below.
Sealed gauge pressure transmitter (20K and above). Please choose range below.
2 Year
NIST
Save 50%
on 2nd year
recalibration
Price
$955.00
1,355.00
915.00
1,315.00
Accessories
NISTPR132
—
NISTPR133
—
NISTPRQ132
—
NISTPRQ133
—
Other options and accessories available, please inquire.
Standard Pressure Ranges in PSI - when ordering, please choose code that matches your specific range.
Code
Range
Code
Range
Code
Range
AH
0-50
AW
0-750
BF
0-5000
AM
0-100
AY
0-1000
BH
0-7500
AN
0-150
AZ
0-1500
BM
0-10K
AP
0-200
BA
0-2000
BP
0-15K
AR
0-300
BC
0-3000
BQ
0-20K
AU
0-500
BR
0-25K
H
99.00
130.00
148.00
195.00
Code
BS
BU
BW
BZ
EC
EG
Range
0-30K
0-40K
0-50K
0-60K
0-75K
0-100K
www.davis.com
Catalog No.
Ask about
763
Pressure Transmitter - Gauge & Absolute
• Hermetically sealed external
controls
• Built-in calibration signal
• All welded, watertight construction
• Submersible
• FM, CSA & CENELEC
Certification (optional)
Applications
• Offshore oil rigs
• Shipboard/Marine
• Pulp and paper
• Chemical processing
• Water treatment
H
764
Viatran's small and
rugged Model 571 pressure
transmitter is designed for
accurate and stable measurement of medium to
high pressures. A sealed
gauge (PSIS) or absolute
(PSIA) pressure reference
is available.
Compact and completely sealed, the Model 571 is
designed to withstand
harsh atmospheres and
submersion to 100 feet. All
welded construction and
the use of 316 stainless
steel makes the 571 airtight, watertight, and ideal
for corrosive environments. The "O" Ring free design simplifies the transmitter and ensures reliability.
Model 571 qualifies for CSA and FM explosion
proof type rating, as well as the CENELEC
(NEMKO) flameproof approval. The 571 has also
been approved by FM as intrinsically safe (entity).
External zero, span, and calibration controls
are hermetically sealed, yet easily adjusted by
means of Viatran's unique magnetically-coupled
drive system. The signal conditioner in the 571 allows for 5:1 ranging of the transmitter's standard
pressure range.
A special feature of this transmitter is a calibration circuit that permits setup and ranging in
the field - without the need for a calibrated pressure source.
Catalog No.
VI571
VI572
VI573
VI574
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
Model
571A572A571S571S—
—
—
—
it
SPECIFICATIONS
Non-linearity (Best fit straight line)
Full Scale Output
Resolution
Long Term Stability
Response Time
Mechanical and Electrical Combined
Temperature Effect on Zero
Temperature Effect on Span
Temperature Effect on Zero & Span
combined at 5:1 Range Down
Max./Min. Operating Temperature
Electrical
Supply Voltage
Output Signal
Load Impedance
Zero Adjustment Elevation
Span Adjustment
Calibration Signal Accuracy
is provided with each unit
Mechanical
0-100 thru 0-15K PSI
0-20K thru 0-50K PSI
Proof Pressure
0-100 thru 0-15K PSI
Burst Pressure
0-100 thru 0-3K PSI
Up to 0-5K PSI
Up to 0-10K PSI
Up to 0-15K PSI
Up to 0-100K PSI
Shock Limitation
Weight
Certifications
Enclosure Classification
Intrinsically Safe
Explosion Proof
0-100,150,300, 500, 1000, 2000, 3000, 5000, 10K,
15K, 20K, 25K, 30K, 40K, 50K, 60K, 75K, 100K
PSIA/PSIS
Typical @ 0.20% FSO (see graph)
≤ ± 0.10% FSO
16mA at 70°F
Infinite
≤ ± 0.25% FSO per 6 months
≤ 20mSec to reach 90% of FSO
≤ ± 0.5% FSO per 100°F
≤ ± 0.5% FSI per 100°F
≤ ± 4.0% FSO per 100°
0°F to + 180°F
+ 190°F / -10°F
-65°F to + 250°F
10-40 VDC
4-20mA at 70°F
1500 Ohms maximum at 40 VDC
-100% of FSO
Rangeable down 5:1 from standard range
± 1.0% FSO. The exact signal to pressure correlation
1/4" NPT female
9/16" - 18 gland thread, pressure relieved, 1/4" OD
high pressure tube, 60° cone. Conforms to autoclave
type F-250-C. F-312-C150 fitting and also available at
these ranges
5/8" = 18 gland thread, pressure relieved. 5/16" OD
high pressure tube, 60° cone. Conforms to autoclave
type F-312-C150
1.5 times FSPR or 20K PSI - whichever is less
1.2 times FSPR
≥ 5 times FSPR
≥ 4 times FSPR
≥ 2.7 times FSPR
≥ 2.3 times FSPR
≥ 1.5 times FSPR or 125K PSI - whichever is less
100 G's
24 oz.
NEMA 4X
FM approved for use in Class I, II, & III, Div. 1, Groups
A thru G indoor and outdoor. NEMKO/CENELEC
(approval pending) EEx la IIC T6
FM approved as suitable for use in Class I, II, III, Div.
1, Groups A thru G, Hazardous locations. CSA
approved for use in Class I, Div. 1, Groups A, B, C &
D, Class II, Div. 1, Groups D, F & G, and Class III, Div.
1 for Hazardous locations. NEMKO/CENELEC
approved flameproof EEx d IIC T6
Description
Price
Absolute pressure transmitter (up to 15K). Please choose range below.
Absolute pressure transmitter (20K and above). Please choose range below.
Sealed gauge pressure transmitter (Up to 15K). Please choose range below
Sealed gauge pressure transmitter (20K and above). Please choose range below
$910.00
1,310.00
880.00
1,280.00
Standard Pressure Ranges in PSI - when ordering, please choose code that matches your specific range.
Code
Range
Code
Range
Code
AH
0-50
AW
0-750
BF
AM
0-100
AY
0-1000
BH
AN
0-150
AZ
0-1500
BM
AP
0-200
BA
0-2000
BP
AR
0-300
BC
0-3000
BQ
AU
0-500
BR
NIST
99.00
130.00
148.00
195.00
Range
0-5000
0-7500
0-10K
0-15K
0-20K
0-25K
Code
BS
BU
BW
BZ
EC
EG
Range
0-30K
0-40K
0-50K
0-60K
0-75K
0-100K
www.davis.com
LVDT Pressure Transducers
NIST
it
• Compact design, shock/vibration resistant
• Operating pressure ranges up to 6000 psi
• Reliable bourdon/LVDT technology
• Temperature ranges up to 85°C
• Corrosion resistant wetted parts, weather resistant design
• Infinite resolution output
• Stable/repeatable output
• Microprocessor compatible
± 199,990
• UL Listed
indication
supply
SPECIFICATIONS
Pressure Range
Over Pressure
Output Voltage and Current
Supply Voltage
Supply Current
Ambient Operating Temperature Range
Load Impedance
Bourdon Tube Standard
Bourdon Tube Optional
Pressure Connection
Housing
Accuracy
Temperature effects
0 to 30 through 6000 psi, compound ranges available, consult factory
110% full scale
1 to 5 VDC and 4 to 20 mA standard. Other output voltages ranges optional
9 to 28 VDC for voltage output units 15 to 40 VDC for current output units
15 mA maximum (VDC output only)
1 to 5 vDC Output Standard: -40° to 85°C 4 to 20 mA Output Standard: -20° to 70°C
2000 ohms minimum (voltage output only)
Beryllium copper brazed to brass connection
316 stainless steel welded to 316 stainless steel connection
1/8-27 ANPT standard
Molded Ultem™ 2300*
7-1/2 inch long, 18 AWG leads
± 2% of span maximum at 25°C (includes linearity, hysteresis, and repeatability)
0.033%/°C typical on zero and span (when operated within ambient operating range)
Model
Description
AM7470
AM7471
AM7472
AM7473
AM7474
AM7475
AM7476
AM7477
AM7478
AM7479
PD885100
PD885105
NISTPR132
NISTPR133
P207PXD0030A
P207PXD0100
P207PXD0300
P207PXD1000
P207PXD3000
P207PXT0030A
P207PXT0100
P207PXT0300
P207PXT1000
P207PXT3000
PD690-3-N
PD690-3-18
—
—
Pressure Transducer, 0-30 PSIG, 1-5VDC Voltage Output
Pressure Transducer, 0-30 PSIG, 4-20mA Current Output (2 Wire Transmitter)
Pressure Transducerr, 0-3000 PSIG, 4-20mA Current Output (2 Wire Transmitter)
Price
$190.00
190.00
190.00
190.00
190.00
195.00
195.00
195.00
195.00
195.00
229.00
478.00
99.00
130.00
www.davis.com
Catalog No.
H
765
Stainless Steel Pressure Transducers
NIST
it
Isolated, Industrial quality
• 0.3% accuracy
• Excellent stability
• Solid state/industrial grade
• Temperature compensated
• Stainless steel wetted parts for maximum media
compatibility
• Rugged Ultem housing provides outstanding
corrosion resistance
• Seven standard pressure ranges up to 500 PSIG
• mV, Voltage or 4-20mA output available
• Vacuum and compound pressure ranges available
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
± 199,990
• UL Listed
indication
supply
SPECIFICATIONS
H
766
Pressure Range
Max. Overpressure
Burst Pressure (at 25°C)
Accuracy
Thermal Effect on Zero (Null)
Thermal Effect on Span
Response Time
Stability
Shock
Vibration
Weight
Electrical Terminations
Media Compatibility
Humidity
0/30 to 0/500 PSIG
2 times full scale or 750 PSIG, whichever is less
5 times full scale
± 0.3% span from best fit straight line including non-linearity repeatability & hysteresis
-40° to 105°C
-5° to 55°C
± 0.5% span (typical) over compensated temperature range, ± 2% max
± 0.5% span (typical) over compensated temperature range, ± 2% max
<20 Milliseconds
± 0.25% Span/Year
100 g
10g 100-2000 Hz
50 grams
#20 AWG Shielded Wire/18” long
316 Stainless Steel Wetted Parts
Passes MIL-STD-202F Method 103B, Condition A
Catalog No.
Model
Description
AM48610
AM48611
AM48612
AM48613
AM48614
AM48615
PD885100
PD885105
NISTPR132
NISTPR133
IPTS0030A
IPTS0100A
IPTS0500A
IPTS0030B
IPTS0100B
IPTS0500B
PD690-3-N
PD690-3-18
—
—
Pressure Transducer, 0-30 PSI, 10 VDC/0-100 mV
Pressure Transducer, 0-30 PSI, 12-25 VDC/4-20 mA
Price
$200.00
200.00
200.00
250.00
250.00
250.00
229.00
478.00
99.00
130.00
www.davis.com
Stainless Steel Pressure Transducers
Isolated Amplified Output
NIST
it
• 316 Stainless steel wetted parts for maximum media compatibility
• 5X burst pressure rating
• 0.25% accuracy
• Excellent stability
• Solid state/industrial grade
• Rugged Ultem housing provides outstanding corrosion resistance
• 10 standard pressure ranges up to 5000 psig
• Amplified output (1-6 VDC standard)
• Unregulated supply requirement (8-15 VDC)
• Automotive style Packard connector
± 199,990
• UL Listed
indication
supply
SPECIFICATIONS
Ref. Ordering Info.
2 times full scale
5 times full scale up to 1000 PSI 3 times full scale greater than 1000 PSI
8 to 15 VDC
1.0 VDC ± 2% span
5.0 VDC ± 1% span
± 0.25% span from best fit straight line including non-linearity, repeatability & hysteresis
-40° to 105°C
-5° to 55°C
± 0.5% span (typical) over compensated temperature range, 2% max
± 0.5% span (typical) over compensated temperature range, 2% max
<20 Milliseconds Stability ± 0.25% Span/Year
50 g
Weight 50 grams
Packard Connector #12162189 with 18” leads
316 Stainless Steel Wetted Parts
Passes MIL-STD-202F Method 103B, Condition A
IP-64
>50K ohms
Catalog No.
Model
Description
AM48410
AM48411
AM48412
AM48413
AM48414
AM48415
PD885100
PD885105
NISTPR132
NISTPR133
SPTC035
SPTC025
SPT0100
SPT0500
SPT1000
SPT5000
PD690-3-N
PD690-3-18
—
—
Pressure Transducer, Vacuum - 35 PSIG
Pressure Transducer, 0-25 PSIG
H
Price
$230.00
230.00
230.00
230.00
250.00
250.00
229.00
478.00
99.00
130.00
www.davis.com
Pressure Range
Maximum Overpressure
Burst Pressure (at 25°C)
Excitation
Null Offset (at 25°C)
Span (at 25°C)
Accuracy
Thermal effect on zero (null)
Thermal effect on span
Response Time
Shock
Electrical Terminations
Media Compatibility
Humidity
Protection Class
Output Impedance
767
Fixed Range Pressure Transmitters
NIST
it
For use with Liquid, Gas or Vapor
• A miniature, low-priced fixed range transmitter, just 0.83 lbs.
(374 grams)
• All welded 316 stainless steel construction and wetted parts
(no aluminum)
• Ranges form vacuum to 5000 psi (0 to 1 to 0 to 345 bar)
• ± 0.30% accuracy
• FM and CSA Explosion Proof Approvals
• 4 to 20 mA output at 12 to 30 VDC
• 3/4-Inch NPT Female conduit connection cable
• 1/2-Inch NPT Female pressure port connection
• Straight in-line construction for a slim profile
• 24 Inch cable standard
• Optional 1-5 VDC output at 8-14 VDC
± 199,990
• UL Listed
indication
supply
SPECIFICATIONS
Ranges
H
768
Output
Offset
Span
Power supply
Loop resistance
Temperature Limits
Electronics (Ambient)
Process Interface
Storage
Catalog No.
0 to 15 psi (0 to 1.0 bar)
0 to 30 psi (0 to 2.1 bar)
0 to 100 psi (0 to 6.9 bar)
0 to 300 psi (0 to 20.7 bar)
0 to 1000 psi (0 to 69.0 bar)
0 to 3000 psi (0 to 206.9 bar)
0 to 5000 psi (0 to 344.8 bar)
4 to 20 mADC, limited to 30 mADC
4.0 mA ± 2.0% span
16.0 mA ± 1.0% span
12 to 30 VDC with reverse polarity protection
900 ohms maximum at 30 volts
-40°F to 140°F (-40°C to 60°C)
-40°F to 212°F (-40°C to 100°C)
-40°F to 212°F (-40°C to 100°C)
Model
Overrange
Humidity Limits
Accuracy
Stability
Temperature Effect
Vibration Effect
Overrange Effect
Process Wetted Parts
Non Wetted Parts
Fill Fluid
Process Connection
Weight
Cable Lengths
Description
AM23740
8310015
Fixed Range Pressure Transmitter, 0 to 15 PSIG
AM23741
8310100
AM23742
8311000
AM23743
8315000
Note: Factory Mutual (FM) Explosion Proof Approval is Standard
PD885100
PD690-3-N
PD885105
PD690-3-18
NISTPR132
—
NISTPR133
—
300%
0 to 100% RH
± 0.30% of calibrated span including linearity,
hysteresis and repeatability at 25°C and 12 VDC
excitation
± 0.50% for six months
(includes zero and span) between -20°F and
140°F (-29°C and 60°C): ± 2.0% per 50°F (28°C)
± 0.10% for 3 g to 200 Hz
± 0.15% full scale per 200% of maximum range
316L Stainless Steel
316 Stainless Steel
DC 200 Silicone (Standard)
1/2 Inch NPT Female
3/4 Inch NPT Female
.83 lb (374 grams)
24 inches (61 cm), 22 AWG
Price
$300.00
300.00
300.00
300.00
229.00
478.00
99.00
130.00
www.davis.com
Miniature Pressure Transmitters
NIST
it
• A miniature, low-priced, full-featured transmitter — just 1.67 lb.
• All welded 316 stainless steel construction and wetted
parts (no aluminum)
• Ranges from 0 to 3 to 0 to 5000 psig (0 to 0.2 to 0 to 350 bar)
• ± 0.25% accuracy
• Zero and span adjustability
• Full 5:1 range turndown
• Integral junction box
• FM and CSA explosion-proof and intrinsically safe
• 4 to 20 mA output at 12 to 40 VDC
• 316SS Base and Hastelloy C Diaphragm, Silicone Oil Fill
• 5-year warranty
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
± 199,990
• UL Listed
indication
supply
SPECIFICATIONS
Accuracy
± 0.25% of calibrated span including linearity,
hyteresis and repeatability
Response Time
Time constant of 20 milliseconds
Stability
± 0.5% of upper range limit for six months
Temperature Effect (includes zero and span)
Compensated
-20° to 180°F (-29° and 82°C)
Between 30° and 130°F ± 1% of URL per 50°F (28°C) (-1° and 54°C)
Between -20° and 180°F ± 1.6% of URL per 50°F (28°C)
(-29° and 82°C)
Power Supply Effect
± 0.005 full scale per volt
Surge Protection
Standard
Vibration Effect
± 0.1% of upper range limit for 3 g to 200 Hz
Position Effect
0.05%/90° tilt
Overrange Effect
± 0.15% full scale per 200% of maximum range
Process Wetted Parts
316 stainless steel
Nonwetted Parts
316 stainless steel
Cast head
CF-8M (316 cast stainless steel)
O Ring
Buna N
Fill Fluid
DC 200 Silicone (standard)
Process Connection
1/2 NPTF
1/2 NPTF
Weight
1.67 lbs.
Catalog No.
Model
Description
AM947720
AM947721
AM947722
AM947723
PD885100
PD885105
NISTPR132
NISTPR133
88C003
88C005
88C006
88C008
PD690-3-N
PD690-3-18
—
—
Miniature Electronic Pressure Transmitter, 0/6 to 0/30 PSI
Price
$625.00
625.00
655.00
655.00
229.00
478.00
99.00
130.00
www.davis.com
H
Functional Specifications
Service
Liquid, gas or vapor
Range Limits
0/. to 0/6 psi (0/0.2 to 0/0.4 bar) consult factory
0/6 to 0/15 psi (0/0.4 to 0/1 bar)
0/15 to 0/30 psi (0/1 to 0/2 bar)
0/20 to 0/100 psi (0/1.4 to 0/7 bar)
0/60 to 0/300 psi (0/4 to 0/20 bar)
0/200 to 0/1000 psi (0/14 to 0/70 bar)
0/600 to 0/3000 psi (0/40 to 0/200 bar)
0/1000 to 0/5000 psi (0/70 to 0/350 bar)
Output
4 to 20 mADC, limited to 30 mADC
Power Supply
12 to 40 VDC with reverse polarity protection
Loop Resistance
1400 ohms maximum at 40 volts
Turndown
5:1
Zero Adjust
± 10%
Span Adjust
± 10%
Temperature Limits
Electronics (Ambient)
-40° to 140°F (-40° to 60°C)
Process Interface
-40° to 212°F (-40° to 100°C)
Storage
-40° to 212°F (-40° to 100°C)
Overrange
300% upper range limit
Humidity Limits
0 to 100% RH
769
316 Stainless Digital Compensated Pressure Transducer
• .20% accuracy typical .3%
worst
• Excellent long term stability
• Solid State / Industrial grade
• Many ranges up to 500psi
• mv, 4-20mA, 1-5VDC, 16VDC output
• Low cost
NIST
it
The Model DCT Transducer is designed for general
industrial and commercial requirements offering excellent performance over a wide range of applications.
It is based on proven mico-machined silicon technology that offers high reliability, long-term stability, and
low cost relative to competing technologies. It combines precision pressure sensing with a rugged stainless steel construction that allows it to operate reliably under the most extreme environmental conditions.
The Model DCT Pressure Transducer is available in
a variety of mounting and electrical options and pressure ranges from 6 PSI to as high as PSI. It is fully
digitally compensated for effects of pressure and temperature changes and calibrated to produce industry
standard electrical outputs. The Model DCT accepts
both unregulated and regulated excitation voltages
and provides output signals such as 1-5VDC, 1-6VDC,
4-20mA, or a ratiometric 0.5 to 4.5VDC
The Model DCT is easy to install and maintain. No
adapters are required, and there is no need for field
calibration. It offers superior accuracy, below 0.25%
span and below 1% over a wide compensated temperature range. Its design incorporates a stainless steel
isolation diaphragm and 316 SS construction for use
with most media types.
SPECIFICATIONS
Pressure Range
Reference Accuracy
H
770
Total Error Band
(Includes temperature effects)
1 Year Stability
Outputs
Input Supply Voltage
Load Limitation
Process Temperature
Compensated Temperature
Overpressure
Burst Pressure
Vibration
Shock
EMC
Process Wetted Material
Electronics Housing Material
Vacuum up to 500psig
± 0.2% FS TYP, ±-.3 FS MAX
(Consult factory for ranges below 15psi)
± 1% FS
<0.25% FS
1-5VDC
1-6VDC
0.5-4.5VDC
9-30VDC
9-30VDC
5VDC ± 5% Ratiometric
50KΩ Min.
50KΩ Min.
1MΩ Min.
-40 to 80° C
-40 to 125° C
-25 to 75° C
2X FS or 750psig, whichever is less
10G, 55-2,000 Hz.
30G
Rated 3V/m (Requires "PE" option)
Brass, Borosilicate, Silicon, RTV, Epoxy
1/8-27 NPT., 1/4-19 NPT.
Cable DIN Packard
Catalog No.
Model
AM316147
AM316060
AM316030
AM316100
AM316300
AM316500
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
DCTC0030PT021
DCTG0006PT021
DCTG0030PT021
DCTG0100PT021
DCTG0300PT021
DCTG0500PT021
—
—
—
—
4-20mA
11-30VDC
500Ω Max.
Description
Pressure Transducer 1/4 NPT 4-20mA, -14.7-30psi
Pressure Transducer 1/4 NPT 4-20mA, 0-6psi
Price
$230.00
230.00
230.00
230.00
230.00
230.00
99.00
130.00
148.00
195.00
www.davis.com
Brass Digital Compensated Transducer
The Model DCT Transducer is designed for general
industrial and commercial requirements offering excellent performance over a wide range of applications.
It is based on proven mico-machined silicon technology that offers high reliability, long-term stability, and
low cost relative to competing technologies. It combines precision pressure sensing with a rugged brass
construction that allows it to operate reliably under
the most extreme environmental conditions.
The Model DCT Pressure Transducer is available in
a variety of mounting and electrical options and pressure ranges from 6 PSI to as high as PSI. It is fully
digitally compensated for effects of pressure and temperature changes and calibrated to produce industry
standard electrical outputs. The Model DCT accepts
both unregulated and regulated excitation voltages
and provides output signals such as 1-5VDC, 1-6VDC,
4-20mA, or a ratiometric 0.5 to 4.5VDC
The Model DCT is easy to install and maintain. No
adapters are required, and there is no need for field
calibration. It offers superior accuracy, below 0.25%
span and below 1% over a wide compensated temperature range. Its design incorporates a diaphragm and
brass construction for use with most media types.
NIST
it
• .20% accuracy typical .3% worst
• Excellent long term stability
• Solid State / Industrial grade
• Many ranges up to 500psi
• mv, 4-20mA, 1-5VDC, 1-6VDC output
• Low cost
SPECIFICATIONS
Pressure Range
Reference Accuracy
<0.25% FS
1-5VDC
1-6VDC
0.5-4.5VDC
9-30VDC
9-30VDC
5VDC ± 5% Ratiometric
50KΩ Min.
50KΩ Min.
1MΩ Min.
-40 to 80° C
-40 to 125° C
-25 to 75° C
10G, 55-2,000 Hz.
30G
Rated 3V/m (Requires "PE" option)
Brass, Borosilicate, Silicon, RTV, Epoxy
1/8-27 NPT., 1/4-19 NPT.
Cable DIN Packard
Catalog No.
Model
AM300147
AM300060
AM300030
AM300100
AM300300
AM300500
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
DCTC0030BPT022
DCTG0006BPT022
DCTG0030BPT022
DCTG0100BPT022
DCTG0300BPT022
DCTG0500BPT022
—
—
—
—
4-20mA
11-30VDC
500Ω Max.
Description
Pressure Transducer 1/4 NPT 4-20mA, -14.7-30psi
H
Price
$185.00
185.00
185.00
185.00
185.00
185.00
99.00
130.00
148.00
195.00
www.davis.com
Total Error Band
(Includes temperature effects)
1 Year Stability
Outputs
Load Limitation
Process Temperature
Overpressure
Burst Pressure
Vibration
Shock
EMC
Vacuum up to 500psig
± 0.2% FS TYP, ±-.3 FS MAX
(Consult factory for ranges below 15psi)
± 1% FS
771
Industrial Pressure Transducers
NIST
it
• Unparalleled Price/ Performance
• Rugged Design Survives Harsh Environments
• Operates Over a Wide Temperature Band
• Compatible with Wide Range of Gases and Liquids
• Operates on Low Cost Unregulated DC Power
• Suitable for High Shock and Vibration Applications
• No Seals or “O” Rings to Cause Leakage
• No Brazed Joints Susceptible to Corrosion Problems
• Meets CE Conformance Standards
SPECIFICATIONS
The Model 209 pressure transducers have been
designed specifically for industrial applications
demanding price and performance requirements.
The 209 offers exceptional reliability in typical industrial grade environments. Standard features
tailor the Model 209 for applications with more
extreme environmental conditions or more stringent performance needs. The transducers are
packaged in rugged stainless steel/Valox housings,
which are small and lightweight for optimum compatibility with system designs. As a totally self contained electronic package, the 209 stainless
steel capacitance sensing element, coupled with a
high level output IC-based circuit, assures excellent accuracy and long term stability.
H
772
Performance Data
Accuracy
Thermal Effects
Zero Shift %FS/100°F(%FS/50°C)
Span Shift %FS/100°F(%FS/50°C)
Response Time
Electrical Data (Voltage)
Circuit
Excitation
Output
Electrical Data (Current)
Circuit
Supply Voltage
Output
Environmental Data
Temperature
Operating Range°F
Compensated Range °F(°C)
Vibration
Shock
Physical Description
Case
Sensor
Pressure Fitting
Pressure Media
Catalog No.
Model
Description
SE 209100
SE 209101
SE 209102
SE 209103
SE 209104
SE 209105
SE 209106
SE 209107
SE 209108
SE 209109
SE209110
SE209111
SE209112
SE209113
SE209114
SE209115
SE209116
SE209117
SE209118
SE209119
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
2091030PC2M1102
2091100PC2M1102
2091005PG2M1102
2091010PG2M1102
2091025PG2M1102
2091050PG2M1102
2091100PG2M1102
2091250PG2M1102
2091500PG2M1102
209110CPG2M1102
2091030PC2M2402
2091100PC2M2402
2091005PG2M2402
2091010PG2M2402
2091025PG2M2402
2091050PG2M2402
2091100PG2M2402
2091250PG2M2402
2091500PC2M2402
209110CPG2M2402
Pressure Transducer, 4-20 mA output, -14.7 to 30 psig
Pressure Transducer, 4-20 mA output, -14.7 to 100 psig
Pressure Transducer, 4-20 mA output, 0 to 5 psig
Pressure Transducer, 5-5.5 VDC output, -14.7 to 30 psig
Pressure Transducer, 5-5.5 VDC output, -14.7 to 100 psig
Pressure Transducer, 5-5.5 VDC output, 0 to 5 psig
—
—
—
—
± 0.25% FS (RSS)
± 2.0 (± 1.8)
± 1.5 (± 1.3)
5 milliseconds
3-Wire (Com, Out, Exc)
9 to 30 VDC
0.5 to 5.5 VDC
2-Wire
9 to 30 VDC
4 to 20 mA
-40 to + 185 (-40 to + 85)
-4 to + 176 (-20 to + 80)
20g
200g
Stainless Steel & Valox
17-4 PH Stainless Steel
2 ft. multiconductor cable
1/4” -18 NPT external
Liquids or gases compatible
with 17-4 PH Stainless Steel
Price
$185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
185.00
99.00
130.00
148.00
195.00
www.davis.com
NEMA 4/IP65 Gauge Pressure Transducer
NIST
it
The Model 256 is packaged in a die-cast aluminum enclosure that is specifically designed for NEMA4/IP65 service. The 256’s robust capacitive design is resistant to environmental effects, such as shock, vibration, temperature and EMI/RFI. Its stainless steel sensing element
does not require isolation from corrosive media.
Available in a wide variety of gauge pressure ranges,
the 256 also features adjustable potentiometers for zero
and span settings..Only 3.6” high x 4.0” wide, the Model
256 is designed for compact installations. The removable
cover provides easy access to the internal terminal strip
for wiring. Installation is quick and easy with 1/2 inch internal threaded conduit ports for electrical termination.
SPECIFICATIONS
Performance Data
Accuracy
± 0.13%FS(RSS) includes non-linearity,
hysteresis, non-repeatability
Environmental Data
Temperature
Operating Range°F(°C)
Compensated Range°F(°C)
Thermal Effects
Zero/Span Shift %FS/°F(°C)
Case
Electrical Connections
Pressure Fitting
Weight
Pressure Media
-40 to + 260 (-40 to + 125)
-4 to + 176(-20 to + 80)
± 0.033 (± 0.06)
Die-Cast Aluminum
Terminal Strip with (4) 1/2” conduit ports
1/4” NPT external
13.4 ounces
Liquids or gases compatible with
17-4 PH Stainless Steel.
Circuit
Excitation
Output
Circuit
Supply voltage
Output
3-Wire (Exc, Out, Com)
9 to 30 VDC
0.1-5.1 VDC
2-Wire
9 to 30 VDC
4-20 mA
Model
SE256100
SE256101
SE256102
SE256103
SE256104
SE256105
SE256106
SE256107
SE256108
SE256109
SE256110
SE256111
SE256112
SE256113
SE256114
SE256115
SE256116
SE256117
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
2561025PG2M11
2561050PG2M11
2561100PG2M11
2561250PG2M11
2561500PG2M11
256110CPG2M11
256130CPG2M11
256150CPG2M11
256110KPG2M11
2561025PG2M22
2561050PG2M22
2561100PG2M22
2561250PG2M22
2561500PG2M22
256110CPG2M22
256130CPG2M22
256150CPG2M22
256110KPG2M22
—
—
—
—
Description
Pressure transducer, 4-20 mA output, 0-25 psig
Pressure transducer, 4-20 mA output, 0-1,000 psig
Pressure transducer, .1-5.1 VDC mA output, 0-25 psig
Pressure transducer, .1-5.1 VDC mA output, 0-1,000 psig
Price
$249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
249.00
99.00
130.00
148.00
195.00
www.davis.com
H
Catalog No.
• High Accuracy
• NEMA 4/IP65
• Wide Operating Temperature Range
• Compatible with a Wide Range of Gases or Liquids
• Corrosive Resistant All Stainless Steel Wetted Parts
• Choice of Voltage or Current Output
• Operates on Low Cost Unregulated Power Supply
773
Differential or Gauge Pressure Transducers
NIST
it
• 3 1/2 Digit LCD Display
• .5 % FS Standard Accuracy
• NEMA 4/IP65 Rated Housing
• Ranges as low as 0.1 in. W.C. (25 Pa)
SPECIFICATIONS
Performance Data
Accuracy
The Model 267 pressure transducers sense
gauge (static) or differential pressure and convert
this pressure difference to a proportional electrical output. The 267 series is offered with a 0 to 5
VDC output or 4-20 mA current output. The 267 is
a single range unit and comes standard with a 3
1/2 digit LCD display. The 267 series has an
IP65/NEMA 4 rated package to withstand environmental effects.
Used in Building Energy Management
Systems, the 267 pressure transducer is available
for air pressure ranges as low as 0.1 in W.C. full
scale to 100 in. W.C. full scale. Static accuracy is
±1% full scale in normal ambient temperature environments.
The rugged design allows up to 10 psi overpressure (in either direction), with no damage to the
unit.
H
774
Catalog No.
Model
SE267100
SE267101
SE267102
SE267103
SE267104
SE267105
SE267106
SE267107
SE267108
SE267109
SE267110
SE267111
SE267112
SE267113
SE267114
SE267115
SE267116
SE267117
SE267118
SE267119
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
26710R1WD11G2HD
2671R25WD11G2HD
26710R5WD11G2HD
2671001WD11G2HD
26712R5WD11G2HD
2671005WD11G2HD
2671010WD11G2HD
2671025WD11G2HD
2671050WD11G2HD
2671100WD11G2HD
26710R1WD2DG2HD
2671R25WD2DG2HD
26710R5WD2DG2HD
2671001WD2DG2HD
26712R5WD2DG2HD
2671005WD2DG2HD
2671010WD2DG2HD
2671025WD2DG2HD
2671050WD2DG2HD
2671100WD2DG2HD
—
—
—
—
Maximum Line Pressure
Overpressure
Thermal Effects
Zero/Span Shift %FS/°F(°C)
Case
Zero and Span Adjustment
Pressure Fittings
Circuit
Excitation
Output
Circuit
Supply Voltage
Output
Pressure Media
± .5% FS (RSS) Includes non-linearity,
hysteresis, and non-repeatability
10 PSI
10 PSI in Positive or Negative Direction
+ 40 to + 140 °F (+ 5 to + 60 °C)
± 0.033 (± 0.06)
0 to + 150 °F (-18 to + 65 °C)
IP65/NEMA 4 Plastic Glass-Filled
Polycarbonate UL94V-O
Terminal Strip Inside of Case
Accessible Inside of Case
3/16” O.D. Barbed Brass for 1/4”
Push-On Tubing
3-Wire (Exc, Gnd, Sig)
Protected from Miswiring
10.2 to 42 VDC
0 to 5 VDC
2-Wire
Protected from Miswiring
9 to 30 VDC
4 to 20 mA
Typically Air or Similar
Non-Conducting Gases
Description
Digital pressure transducer, 4-20 mA output, 0-.1"WC
Digital pressure transducer, 4-20 mA output, 0-1"WC
Digital pressure transducer, 4-20 mA output, 0-2.5"WC
Digital pressure transducer, 0-5 VDC output, 0-.1" WC
Digital pressure transducer, 0-5 VDC output, 0-1" WC
Digital pressure transducer, 0-5 VDC output, 0-2.5" WC
Price
$315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
315.00
99.00
130.00
148.00
195.00
www.davis.com
Differential or Gauge Pressure Transducers
The 265 pressure transducers sense differential or gauge (static) pressures and convert this
pressure difference to a proportional electrical
output. The 265 is offered with a high level 0-5
VDC output or a 4-20 mA output. Used in
Building Energy Management Systems, these
transducers are capable of measuring pressures
and flows with the accuracy necessary for proper
building pressurization and air flow control. The
265 Series very low pressure transducers are
available for air pressure ranges as low as 0.25 in.
WC full scale up to 100 in. WC full scale. Static
accuracy is ±1% full scale in normal ambient temperature environments. The rugged design allows
up to 10 PSI overpressure (in either direction)
with no damage to the unit. In addition, the sensor parts have thermally matched coefficients,
which promote improved temperature performance and excellent long-term stability.
• 10 PSI proof pressure on all ranges
• High level 0-5 VDC and 2-wire 4-20 mA analog
outputs are compatible with most energy
management systems
• Fully protected against reverse wiring
• Internal regulation permits use with unregulated DC
power supplies
• Meets CE conformance standards
NIST
SPECIFICATIONS
Performance Data
Accuracy
Operating Range°F (°C)
Compensated Range °F(°C)
Thermal Effects %FS/°F(°C)
Maximum Line Pressure
Overpressure
Case
Pressure Fittings
Weight
Circuit
Excitation
Output
Circuit
Supply Voltage
Output
Pressure Media
± 1.0% FS (RSS)
0 to + 150 (-18 to + 65)
0 to + 150 (-18 to + 65)
± .033% FS (.018% FS)
10 PSI
10 PSI in Positive or Negative Direction
Fire Retardent Glass Filled Polyester
Screw Terminal Strip
3/16” OD Fitting for 1/4” ID Tubing
3 ounces
3-Wire (Com, Out, Exc)
9 to 30 VDC
0 to 5 VDC
2-Wire
12 - 30 VDC
4 to 20 mA
Typically air or similar non-conducting gases.
Model
Description
SE265100
SE265101
SE265102
SE265103
SE265104
SE265105
SE265106
SE265107
SE265108
SE265109
SE265110
SE265111
SE265112
SE265113
SE265114
SE265115
SE265116
SE265117
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
2651R25WD11T1C
26510R5WD11T1C
2651001WD11T1C
26512R5WD11T1C
2651005WD11T1C
2651010WD11T1C
2651025WD11T1C
2651050WD11T1C
2651100WD11T1C
2651R25WD2BT1C
26510R5WD2BT1C
2651001WD2BT1C
26512R5WD2BT1C
2651005WD2BT1C
2651010WD2BT1C
2651025WD2BT1C
2651050WD2BT1C
265100WD2BT1C
Pressure transducer, 4-20 mA output, 0-.25" WC
Pressure transducer, 4-20 mA output, 0-.5" WC
Pressure transducer, 4-20 mA output, 0-1" WC
Pressure transducer, 4-20 mA output, 0-2.5" WC
Pressure transducer, 0-5 VDC, 0-.25" WC
Pressure transducer, 0-5 VDC, 0-.5" WC
Pressure transducer, 0-5 VDC, 0-1" WC
Pressure transducer, 0-5 VDC, 0-2.5" WC
—
—
—
—
Price
$150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
150.00
99.00
130.00
148.00
195.00
www.davis.com
H
Catalog No.
it
775
Intrinsically Safe Pressure Transmitters
NIST
it
The IS-10 industrial and IS-11 non-clogging
flush diaphragm pressure transmitters are designed for industrial pressure measurement applications where intrinsically safe ratings are required. Each transmitter undergoes extensive
testing and calibration to achieve an accuracy of
0.25% full scale. State-of-the-art surface mount
technology ensures that the unit is protected
against vibration, shock and humidity. Each unit
is temperature compensated to assure accuracy
and long-term stability under severe ambient
temperature variations.
The compact design features all stainless steel
wetted parts and is available with a variety of
electrical and process connections to meet specific
installation requirements.
• Approvals pending for Class I Division 1 and Class I Zone 0 locations
when used with an approved barrier
• 4-20 mA 2-wire output signal
• Highly resistant to pressure spikes and vibration
H
776
Catalog No.
Range
Stainless Steel Case
WKIS1030HGVAC
WKIS100050INWC
WKIS100100INWC
WKIS1000005PSI
WKIS1000010PSI
WKIS1000015PSI
WKIS1000025PSI
WKIS1000030PSI
WKIS1000050PSI
WKIS1000060PSI
WKIS1000100PSI
WKIS1000160PSI
WKIS1000200PSI
WKIS1000250PSI
WKIS1025000PSI
WKIS1040000PSI
WKIS1000015PSIA
WKIS1000025PSIA
WKIS1000050PSIA
30 – 0 Inches Hg Vacuum
0 – 50 Inches Water Column
0 – 100 Inches Water Column
0 - 5 psi
0 - 10 psi
0 - 15 psi
0 - 25 psi
0 - 30 psi
0 - 50 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 250 psi
0 - 25000 psi
0 - 40000 psi
0 - 15 psi absolute
0 - 25 psi absolute
0 - 50 psi absolute
Price
$455.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
385.00
1,145.00
1,145.00
455.00
455.00
455.00
SPECIFICATIONS
Accuracy + 0.25% Best Fit Straight Line
Wetted Parts
316SS and PH17 – 4 SS (>= 400 psi)
Case
316SS
Pressure Connection 1/2” NPT Male
Power Supply
10 – 30 V DC
Signal Output
4 – 20mA, 2-wire
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
99.00
130.00
148.00
195.00
www.davis.com
Explosion Proof * Pressure Transmitters
NIST
it
Type E-10 explosion proof pressure transmitters are specifically designed to meet the durability and performance requirements of industrial applications. These pressure transmitters feature
an industry standard 4-20 mA 2-wire signal output, NEMA 4 (IP 67) weather protection, and are
extremely resistant to pressure spikes, vibration,
and moisture intrusion. The NACE approved wetted parts materials provide extra resistance
against sulfide stress cracking when exposed to
gases containing sulphur.
• Explosion proof rating Approvals Pending
• Available with 4-20 mA 2-wire or 1-5 Volt, or 0.5-4.5
ratiometric 3-wire output signals (voltage output at an
additional cost)
• Engineered to meet the harsh demands of industrial
applications
• NACE approved wetted parts
• Retrofits many existing applications
SPECIFICATIONS
Accuracy
Wetted Parts
Case
Pressure Connection
Power Supply
Signal Output
*
± 0.25% Best Fit Straight Line
316SS / Elgiloy
316SS
1/2” NPT Male
10 – 30 V DC, 1/2”
Male conduit 5 foot cable
4 – 20mA, 2-wire
Approvals Pending
Ask about
2 Year
NIST %
Save 50
on 2nd year
recalibration
Catalog No.
Range
Price
30 Inches Hg Vacuum
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 200 psi
0 - 300 psi
0 - 500 psi
0 - 1000 psi
0 - 1500 psi
0 - 2000 psi
0 - 3000 psi
0 - 5000 psi
0 - 8000 psi
0 - 10000 psi
0 - 15000 psi
$379.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
329.00
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
99.00
130.00
148.00
2 Year NIST Traceable Certificate with Data 195.00
www.davis.com
H
WKE1030HGVAC
WKE1000015PSI
WKE1000030PSI
WKE1000060PSI
WKE1000100PSI
WKE1000200PSI
WKE1000300PSI
WKE1000500PSI
WKE1001000PSI
WKE1001500PSI
WKE1002000PSI
WKE1003000PSI
WKE1005000PSI
WKE1008000PSI
WKE1010000PSI
WKE1015000PSI
777
Pressure Transmitters
NIST
it
WIKA C -10 pressure transmitters and transducers are precision engineered to meet the price
and performance requirements of Original
Equipment Manufacturers. Each unit undergoes
extensive quality control testing and calibration
to achieve an accuracy < 0.50% full scale. The
printed circuit boards use state-of-the-art surface
mount technology and are potted in silicone gel for
protection against mechanical shock, vibration,
and moisture. Each unit is temperature compensated to assure accuracy and long- term stability
when exposed to severe ambient temperature
variations.
The C -10 provides a rugged design featuring
excellent vibration resistance and long service
life. OEM applications include hydraulics, pneumatics, press control, compressor control, pump
protection and numerous other processing and
control operations.
SPECIFICATIONS
Accuracy
Wetted Parts
Case
Pressure Connection
Power Supply
Signal Output
316SS
304SS
1/4” NPT Male
10 – 30 V DC
4 – 20mA 2-wire
H
Range
Catalog No.
Stainless Steel Case, 1/4” NPT Connection
778
WK4204833
WK8363434
WK8363442
WK8363450
WK4256671
WK8363468
WK8363476
WK8363515
WK8363485
WK8363493
WK4256698
WK8363506
WK9697688
WK8357247
0 - 100 Inches WC
0 - 5 psi
0 - 15 psi
0 - 25 psi
0 - 30 psi
0 - 50 psi
0 - 60 psi
0 - 100 psi
0 - 160 psi
0 - 200 psi
0 - 250 psi
0 - 300 psi
0 - 500 psi
0 - 600 psi
Price
Catalog No.
Range
Price
Stainless Steel Case, 1/4” NPT Connection
$195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
WK8357255
WK8357264
WK8357272
WK8354753
WK8347390
WK8357280
WK8357298
WK8359576
0 - 1000 psi
0 - 1500 psi
0 - 2000 psi
0 - 3000 psi
0 - 5000 psi
0 - 7500 psi
0 - 10000 psi
0 - 15000 psi
$195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
Accessories
NISTPR132
99.00
NISTPR133
130.00
NISTPRQ132 2 Year NIST Traceable Certificate
148.00
NISTPRQ133 2 Year NIST Traceable Certificate with Data 195.00
0-5V, 1-5V, 0-10V 3-wire output options available
www.davis.com
Non-Incendive Pressure Transmitters
NIST
it
The N-10 is FM approved non-incendive for
Class I, Division II, Groups A, B, C, and D. It
features a 1/2” male conduit electrical connection, NACE listed wetted parts, NEMA 4 / IP
67 weather protection, and excellent vibration resistance.
SPECIFICATIONS
Accuracy
Wetted Parts
Case
Pressure Connection
Power Supply
Signal Output
316SS / Elgiloy
316SS
1/4” NPT Male
10 – 30 V DC,
1/2” Male conduit 5 foot cable
4 – 20mA, 2-wire
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Catalog No.
Range
30 Inches Hg Vacuum
0 - 15 psi
0 - 30 psi
0 - 60 psi
0 - 100 psi
0 - 200 psi
0 - 300 psi
0 - 500 psi
0 - 1000 psi
0 - 1500 psi
0 - 2000 psi
0 - 3000 psi
0 - 5000 psi
0 - 8000 psi
Price
$345.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
295.00
H
WKN1030HGVAC
WKN1000015PSI
WKN1000030PSI
WKN1000060PSI
WKN1000100PSI
WKN1000200PSI
WKN1000300PSI
WKN1000500PSI
WKN1001000PSI
WKN1001500PSI
WKN1002000PSI
WKN1003000PSI
WKN1005000PSI
WKN1008000PSI
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
99.00
130.00
148.00
195.00
www.davis.com
779
Sanitary Pressure Transmitters
NIST
it
S-10-3A Sanitary Pressure Transmitters :
WIKA S-10-3A pressure transmitters meet 3A
sanitary criteria for pressure and level measurement in the food, pharmaceutical, cosmetic, and
beverage industries. They feature 0.25% accuracy, rugged stainless steel construction, and a wide
operating temperature range.
The 316 stainless steel flush diaphragm minimizes product buildup. The all welded chemical
seal system includes food grade liquid fill and is
designed for “clean in place” (CIP) and “sterilize in
place” (SIP) maintenance procedures. The transmitters are available with industry standard 1.5”
or 2” Tri-Clamp® connections.
Each transmitter undergoes extensive quality
control testing and calibration. The printed circuit boards use state-of-the-art surface mount
technology and are potted in silicone gel for protection against mechanical shock, vibration, and
moisture. Each transmitter is temperature compensated to assure accuracy and long-term stability when exposed to severe ambient temperature
variations.
SPECIFICATIONS
H
780
Accuracy
Wetted Parts
Case
Pressure Connection
Power Supply
Signal Output
± 0.25% B.F.S.L.
316SS
304SS
1.5” or 2” Tri-Clamp Connections
10 – 30 V DC
4 – 20mA 2-wire
Catalog No.
Range
Stainless Steel Case, 1.5” tri-clamp connection
WK9766329
30 - 0 Hg Vacuum
WK8997395
30” - 0 - 30 psi
WK9799732
30” - 0 - 60 psi
WK4204387
30” - 0 - 100 psi
WK9748202
0 - 15 psi
WK9744703
0 - 30 psi
WK4215789
0 - 50 psi
WK9744703
0 - 60 psi
WK9748237
0 - 100 psi
WK9748245
0 - 160 psi
Price
$590.00
590.00
590.00
590.00
525.00
525.00
525.00
525.00
525.00
525.00
Catalog No.
Range
Stainless Steel Case, 1.5” tri-clamp connection
WK9749408
0 - 200 psi
WK9776227
0 - 250 psi
WK8990985
0 - 300 psi
WK4205081
0 - 500 psi
WK8993470
0 - 1000 psi
Price
$525.00
525.00
525.00
525.00
525.00
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
99.00
130.00
148.00
195.00
www.davis.com
4 1⁄2 “ Duratran Pressure Transmitter
NIST
it
The Duratran® transmitter introduces a unique
electronic pressure-indicating transmitter with
direct mechanical indication suitable for aggressive environments and process fluids.
The Duratran transmitter combines outstanding, reliable local indication that functions without the need for external power with a stable, selfcontained 4/20mA transmitter in a hermetically
sealed corrosion-proof case (Type 2279).
The wide selection of system materials and corrosion-proof housing meets application requirements in a number of industries. These include
chemical processing, petrochemical and refining
plants, electric and gas utilities, wastewater and
other industrial applications.
This electronic pressure-indicating transmitter
promises increased service life and long-term
stability.
SPECIFICATIONS
Functional Service
Ranges
Output
Power Supply
Zero Adjustment
Span Adjustment
Temperature Limit
Overpressure Limits
Humidity Limits
Signal Damping
Liquid, gas or vapor
See ordering information
4-20mA, 2 wire
12/40 Vdc
± 20% of full scale
± 10% of full scale
-40°F to 160°F
130% of range without damage to tube
Up to 90% relative humidity noncondensing
Fixed electronic damping time constant of
0.2 seconds
Less than 1 second
NEMA 4
• Zero and span adjustments
• FM approved intrinsically safe
• 41⁄2" solid-front phenolic case
Catalog No. Bourdon Tube /
Tip Material
AS775923
AS775924
AS775925
AS775927
Catalog No.
ML428271
NISTPR32
NISTPR33
Range
Price
316 Stainless Steel
0-30 psi
$450.00
316 Stainless Steel
0-100 psi
450.00
316 Stainless Steel
0-200 psi
450.00
316 Stainless Steel
0-1000 psi
450.00
Model Description
2400
Process Power Pack 24VDC-175mA 130.90
—
99.00
—
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
www.davis.com
H
Turn On Time
Enclosure
Agency Approval
Factory Mutual approved as intrinsically safe for Class I, II and III, Division
1, applicable Groups A, B, C, D, E and G in accordance with Dresser
drawing 71B185 and entity requirements; nonincendive for Class, I, II, III,
Division 2, Groups A, B, C, D and G hazardous locations.
* 0-20000 psi range not FM approved
PERFORMANCE
Accuracy
± 0.5% including linearity, hysteresis and
repeatability
Stability
± 0.25% F.S. for 6 months
Temperature Effect
Less than 0.02% of span/°F
Position Effect
Vertical mounting recommended
May be re-zeroed to correct error in other
positions
PHYSICAL
Dial Size
41⁄2"
Case
Solid front, black phenolic hermetically
sealed
Ring
Threaded, glass-filled polypropylene
Mounting
Stem, surface, flush (with 1278 M ring)
1
Pressure Connection
⁄2 NPT
Window
Laminated safety glass
Calibration
Transmitter — Span and zero adjustment
on dial
Gauge -- Zero adjustment with micrometer
pointer
30" #18 wire AWG, 1⁄2 NPT liquid tight
conduit connection at case
Weight
3 lb
• ± 0.5% of full-scale accuracy
• Ranges from 12 to 20,000 psi
• 4-20mA, 2-wire output
781
P to I (Pressure to Current) Convertor
NIST
it
The X55-300 Series P to I Convertors convert
instrument air pressures to analog current or voltage signals. The two and four-wire models are
both available with five common input ranges
from 3-15 psig to 0-100 psig. A solid-state sensor
assures you of outstanding linearity, negligible
hysteresis, very fast response times and excellent
temperature stability.
The electronics portion of our P to I Convertor
can be removed from the pneumatic base without
loss of air pressure. The means you can perform
simple calibration and regular maintenance without purging the air lines. Simple to install and
maintain, the X55-300 features output monitoring
test jacks, a loss-of-air alarm (on elevated zero
units only), an adjustable setpoint alarm option
and front access calibration.
• Detachable electronic module for easier and faster calibration and
system maintenance
• Solid-state design for higher accuracy, faster response and better
process control
• Front access test jacks and alarm indicators
simplifies calibration and reduces down-time
• Two or four-wire models
• 5 ranges up to 100 psig
• Insensitive to vibration and mounting position
• Front accessible zero, span and setpoint adjustments
• Loss-of-air alarm indicator and output signal
• Optional high or low pressure adjustable setpoint
• 3-times maximum rated pressure without damage
• Please specify input pressure range of( 3-15 psig; 3-27 psig or 6-30 psig or 0-30 psi; 0-100 psi; 0-6 psi; or 0-12 psi)
• Specify output format (-B = 4-20 mA; -C = 10-50mA)[example: x55 - 302 - (3 - 15) -B-SM]
Catalog No.
H
782
Model
Description
RN474141
X55-302 (input) (output)-SM
General Purpose module w/ surface mount base
RN474142
X55-302-(input)-(output)-DIN
General Purpose module W/32 mm "G" style DIN base
RN474143
X55302-(input)-(output)-D2
General Purpose module w/35 mm "U" style DIN base
RN474144
X55-302-EXP(input) (output)
Explosion proof module and base
RN474145
X55-302-M (input) ( output)
Replacement module only w/o/ base
Four wire (24 vdc powered ) P/i Transmitter
• Please specify input pressure range (3-15 psi; 3-27 psi; 6-30 psi; 0-100 psi; 0-6 psi; 0r 0-12 psi)
• Specify output format (-B = 4-20 mA; -C = 10-50 mA; -D = 1-5 vdc; -E = 2-10 vdc; -F = 0-5 vdc; -G = 0-10 vdc)
RN474146
(input) (output)X55-304- SM
General Purpose module W/ surface mount base
RN4741447
(input) (output)X55304 - DIN
General Purpose module W/32mm "G" style base
RN474148
(input) (output)X55-304-D2
General Purpose module W/ 35mm "U' style base
RN474149
(input) (output) X55-304-EXP
Explosion Proof module and base
RN474150
(input) (output)X55-304-M
Replacement module only w/o base
X55-302/304 Mounting Hardware and Accessories
RN474151
X55-300-SM
Replacement surface and mount base only
RN474152
X55-300-DIN
Replacement 32mm "G' style DIN rail base only
RN474153
X55-300-D2
Replacement 35mm "U" style DIN rail base only
RN471454
X55-300-EXP
Replacement explosion proof housing and base only
RN471455
X55-300-SSTAG
Stainless steel tag
RN471456
X55-300-PMB
2" pipe mount bracket (epoxy painted)
RN471457
X55-300-PMB
2" 304 stainless steel pipe mount bracket
RN474137
DI-32X15
32mm "G" style rail, (order per foot)
RN474138
D2-35X7.5
35mm X7.5 "u" style DIN rail, (order per foot)
RN474139
D2-35X15
35mm X 15 mm "u" style DIN rail, (order per foot)
RN474158
X55-300-MF-DI
Conversion kit, SM or 35mm DIN to 32mm DIN
RN474159
X55-300-MF-D2
Conversion kit, SM or 32mm DIN to 25mm DIN
NISTDT01
—
NISTDT02
—
NISTDTQ01
—
NISTDQ02
—
Price
$283.00
283.00
289.00
452.00
248.00
341.00
341.00
348.00
514.00
307.00
37.00
37.00
39.00
182.00
19.00
19.00
61.00
6.50
5.00
6.50
17.00
17.00
75.00
125.00
112.00
187.00
www.davis.com
I to P (Current to Pressure) Transducers
I to P (Current to Pressure) Transducers
The X55-600 Series “Hard to Plug“ I to P transducers
are state of the art and feature field selectable input
current ranges of 4-20 mA and 10-50 mA for standard
output pressures of 3-15 psig, 3-27 psig and 6-30 psig.
Utilizing advanced solid state technology and feedback
control, the X55-600 series provides high reliability and
exceptional output accuracy over a wide temperature
range. The unit features minimal vibration sensitivity
(less than ±1% of span at 1 g from 5 to 2000 Hz) and can
be mounted in any directional position. The X55-600
provides fast system response by providing from 3
SCFM to as much as 10 SCFM flow capacity at 100 psi
supply air pressures.
Catalog No.
Model
Description
Price
RN474110
X55-600-GP-SM
General purpose
surface mount
$335.00
RN474111
X55-600-GP-DIN
General purpose
DIN rail-mount
335.00
RN474112
X55-600-GP-M
General purpose
manifold mount (without base)
RN474113
X55-600-GP-D2
RN474114
• No pre-regulator need for lower installation and maintenance costs
• Low air consumption for lower compressor loads and lower running
costs
• Hard-to-plug-design for less “down time“ and lower maintenance costs
• Selectable input ranges of 4-20 mA or 10-50 mA
• Output pressure of 3-15 psig, 3-27 psig and 6-30 psig
• Selectable direct or reverse acting modes
• Can be mounted in any position
• Vibration resistant
• Selectable split ranging in direct or reverse mode
• Operating temperature range -40° to 150° F
• Intrinsic Safety, Explosion Proof and Division 2 approvals are standard
Catalog No.
Model
Description
Price
RN474122
X55-600-SMC-10
$550.00
RN474123
X55-600-RM-8
10 position surface mount
manifold chassis
8 Position, 19" rack mount
manifold chassis
495.00
Accessories
RN474130
X55-600-UMB
335.00
RN474131
X55-600-PMB
General purpose
35mm rail mount
340.00
X55-600-N4-SM
NEMA 4 General purpose
surface mount
360.00
RN474132
RN474133
RN474134
RN474135
X55-77-4
X55-0-30
X55-0-60
X55-600-MF-D1
RN474115
X55-600-N4-DIN
DIN rail mount
365.00
RN474136
X55-600-MF-D2
RN474116
X55-600-N4-D2
35mm rail mount
365.00
RN474137
D1-32x15
RN474117
X55-600-EX-SM
NEMA 4 Explosion proof
surface mount
505.00
RN474138
D2-35x7.5
RN474139
D2-35x15
RN474140
NISTDT01
NISTDT02
X55-600-SS TAG
—
—
Manifold Chassis
RN474120
X55-600-SMC-4
manifold chassis
220.00
RN474121
X55-600-SMC-8
manifold chassis
440.00
it
Universal mounting bracket
(use with surface mount units only)
2" Pipe mount bracket
(use with surface mount units only)
Filter/Preregulator
Pressure gauge (0-30 psi)
Pressure gauge (0-60 psi)
Conversion kit, SM or
35mm DIN to Standard DIN
Conversion kit, SM or
standard DIN to 35mm DIN
32mm x 15mm “G” style rail,
per foot (specify length)
35mm x 7.5mm “U” style rail,
35mm x 15mm “U” style rail,
Stainless steel tag
20.50
27.00
130.00
35.00
40.00
20.50
20.50
5.10
3.80
5.10
23.00
75.00
125.00
www.davis.com
H
I to P Modules (Please specify range of 3-15 psig,
3-27 psig or 6-30 psig)
NIST
783
I/P (Current to Pressure) & E/P (Voltage to Pressure) Transducers
TYPE 1001 NEMA 4X
TYPE 2000 NEMA 4X
TYPE 1001 I/P & E/P
• 0.1% accuracy typical
• Zero-based output models available
• NEMA 4X explosion-proof models available
• Intrinsically safe (FM / CSA)
• Built in volume booster provides flows up to 12 SCFM
• Mounts at any angle (except Nema 3R)
• Low air consumption
• Removable orifice (restrictor) for easy maintenance
• Bottom port units available
• CE approval
• Vibration Insensitive
TYPE 2000 I/P & E/P
• High precision, 0.1% accuracy typical
• Vibration and position insensitive
• Reliable, simple piezo ceramic beam actuator
• DIP switches permit field selection of inputs and direct/reverse/split
ranging
• Very wide selection of input and output ranges
• Precise, reliable performance under extreme
conditions of temperature, vibration, orientation,
supply pressure changes, supply voltage changes, RFI/EMI,
humid / oil-laden media and corrosive surroundings
• Standard model is Nema 4x (weatherproof)
Explosion proof model–also Nema 4x
H
784
TYPE 1001 NEMA 4X
Explosion-Proof Housing
TYPE 2000 NEMA 4X
TO ORDER, SEE NEXT PAGE ➡
www.davis.com
NIST
Catalog No.
Model
Range
Price
General Purpose Panel or Bracket Mount
Nema 4X Explosion Proof Pipe, Panel or Bracket Mount
4-20 mA / 3-15 psig
4-20 mA / 3-27 psig
4-20 mA / 6-30 psig
4-20 mA / 0-15 psig
4-20 mA / 0-100 psig
4-20 mA / 3-15 psig
4-20 mA / 3-27 psig
4-20 mA / 6-30 psig
4-20 mA / 0-15 psig
4-20 mA / 0-100 psig
$508.20
508.20
508.20
538.20
538.20
693.00
693.00
693.00
723.00
723.00
Nema 4X Explosion Proof Pipe, Panel, or Bracket Mount
0-10 VDC / 3-15 psig
0-10 VDC / 3-27 psig
0-10 VDC / 6-30 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-100 psig
0-10 VDC / 3-15 psig
0-10 VDC / 3-27 psig
0-10 VDC / 6-30 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-100 psig
508.20
508.20
508.20
538.20
538.20
693.00
693.00
693.00
723.00
723.00
Nema 4X, Intrinsically Safe Pipe, Panel or Bracket
Nema 4X, Explosion Proof Pipe, Panel or Bracket
4-20 mA / 3-15 psig
4-20 mA / 3-27 psig
4-20 mA / 6-30 psig
4-20 mA / 0-15 psig
4-20 mA / 0-100 psig
4-20 mA / 3-15 psig
4-20 mA / 3-27 psig
4-20 mA / 6-30 psig
4-20 mA / 0-15 psig
4-20 mA / 0-100 psig
425.00
425.00
425.00
425.00
425.00
500.00
500.00
500.00
500.00
500.00
0-10 VDC / 3-15 psig
0-10 VDC / 3-27 psig
0-10 VDC / 6-30 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-100 psig
0-10 VDC / 3-15 psig
0-10 VDC / 3-27 psig
0-10 VDC / 6-30 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-100 psig
425.00
425.00
425.00
425.00
425.00
500.00
500.00
500.00
500.00
500.00
—
—
—
—
4.00
8.00
8.00
5.00
75.00
125.00
112.00
187.00
Panel Mounting Kit
Valve Mounting Kit
2" Pipe Mounting Kit
DIN Rail Adaptor
www.davis.com
H
Type 1001 I/P
MB966020
966-020-000
MB966030
966-030-000
MB966040
966-040-000
MB966060
966-060-000
MB966090
966-090-000
MB968021
968-021-000
MB968031
968-031-000
MB968041
968-041-000
MB968061
968-061-000
MB968091
968-091-000
Type 1001 E/P
MB966620
966-620-000
MB966630
966-630-000
MB966640
966-640-000
MB966660
966-660-000
MB966690
966-690-000
MB968621
968-621-000
MB968631
968-631-000
MB968641
968-641-000
MB968661
968-661-000
MB968691
968-691-000
Type 2000 I/P
MB24231
2KSNNF42DF31500
MB24232
2KSNNF42DF32700
MB24233
2KSNNF42DF63000
MB24234
2KSNNF42DF01500
MB24235
2KSNNF42DF10000
MB24236
2KENNF42DF31500
MB24237
2KENNF42DF32700
MB24238
2KENNF42DF63000
MB24239
2KENNF42DF01500
MB24240
2KENNF42DF10000
Type 2000 E/P
MB24241
2KSNNF01DF31500
MB24242
2KSNNF01DF32700
MB24243
2KSNNF01DF63000
MB24244
2KSNNF01DF01500
MB24245
2KSNNF01DF10000
MB24246
2KENNF01DF31500
MB24247
2KENNF01DF32700
MB24248
2KENN F01DF63000
MB24249
2KENNF01DF01500
MB24250
2KENNF01DF10000
Accessories Type 1001 & 2000
MB010135
010-135-000
MB010134
010-134-000
MB010143
010-143-000
MB010115
010-115-000
NISTDT01
—
NISTDT02
—
NISTDTQ01
—
NISTDTQ02
—
Description
it
785
I/P (Current to Pressure) & E/P (Voltage to Pressure) Transducers
• Built-in booster provides flow capacity up to
12 SCFM
• Small size, light weight
• Field reversible
• Explosion-proof and
intrinsically safe
models available
• Low Air Consumption
• Mounts at any angle
• Convenient external
span and zero adjusts
• Wide supply pressure range
• Low supply pressure sensitivity
• CE approval
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
TYPE 1000 General Prupose
H
786
TYPE 1000 NEMA 4X
TYPE 1000 General Prupose
cut-away
Catalog No.
Model
Description
Range
Type 1000 I/P
MB961070
MB961074
MB961075
MB961117
MB961111
MB961098
Price
961-070-000
961-074-000
961-075-000
961-117-000
961-111-000
961-098-000
General Purpose Pipe, Panel or Bracket Mount
Nema 4x, Explosion Proof Pipe, Panel or Bracket Mount
4-20 mA / 3-15 psig
4-20 mA / 3-27 psig
4-20 mA / 6-30 psig
4-20 mA / 2-60 psig
4-20 mA / 3-120 psig
4-20 mA / 3-15 psig
$285.00
285.00
285.00
338.45
338.45
528.89
961-085-000
961-086-000
961-087-000
961-118-000
961-112-000
961-142-000
Nema 4X, Explosion Proof Pipe, Panel or Bracket Mount
1-9 VDC / 3-15 psig
1-9 VDC / 3-27 psig
1-9 VDC / 6-30 psig
0-5 VDC / 2-60 psig
0-10 VDC / 3-120 psig
1-9 VDC / 3-15 psig
285.00
285.00
285.00
338.45
338.45
528.89
Type 1000 E/P
MB961085
MB961086
MB961087
MB961118
MB961112
MB961142
www.davis.com
NIST
it
TYPE 1500 I/P & E/P
• 3,5, & 10 unit Manifolds Available
• Manifold mounting with ports on front & back of unit
• Low air consumption
• Field reversible
• Small footprint, compact
• CE Approval (conduit version only)
Catalog No.
Type 1500 I/P
MB969710
MB969713
MB969716
MB966710
MB966713
MB966716
Model
• FM, CSA, CENELEC intrinsically safe (option)
• Durable weatherproof NEMA 4X housing (option)
• Built in Volume Booster provides 7 SCFM @ 15psi / 1.0 BAR
• Wide selection of input and output ranges from
0 to 120 psi / 8.3 BAR
• Conduit fittings, terminal block, DIN connectors
Description
Range
Price
Indoor Use, General Purpose Pipe, Panel or Bracket Mount
Indoor Use, general Purpose Pipe, Panel or Bracket Mount
Nema 4X Pipe, Panel or Bracket Mount
4-20 mA / 3-15 psig
4-20 mA / 0-15 psig
4-20 mA / 0-120 psig
4-20 mA / 3-15 psig
4-20 mA / 0-15 psig
4-20 mA / 0-120 psig
285.00
285.00
340.00
339.00
339.00
394.00
969-750-000
969-753-000
969-756-000
966-750-000
966-753-000
966-756-000
0-10 VDC / 3-15 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-120 psig
0-10 VDC / 3-15 psig
0-10 VDC / 0-15 psig
0-10 VDC / 0-120 psig
285.00
285.00
340.00
339.00
339.00
394.00
010-134-000
010-143-000
010-606-000
010-606-001
010-606-002
010-602-000
971-140-000
—
—
—
—
Type 1000 Valve Mounting
Type 1000 2” Pipe Mounting Kit
Type 1500 3 Station Manifold Kit
Manifold Adaptor Kit
DIN Rail Kit
Type 1500 E/P
MB969750
MB969753
MB969756
MB966750
MB966753
MB966756
Accessories
MB010134
MB010143
MB010606
MB0106061
MB0106062
MB010602
MB971140
NISTD01
NISTD02
NISTDTQ01
NISTDTQ02
8.00
8.00
191.00
301.00
360.00
88.00
8.00
75.00
125.00
112.00
187.00
www.davis.com
H
969-710-000
969-713-000
969-716-000
966-710-000
966-713-000
966-716-000
787
Precision Air Regulators & Filter Regulators
Type 50
• Superior regulation
characteristics
• Rugged, corrosionresistant construction
• Self-relieving
• Integral, 40 micron,
self cleaning filter
• Several mounting
options
• Low cost
Type 70
• High flow capacity - Up to 80 SCFM
• Responds quickly to minute changes in downstream
pressure
• Dampening action of aspirator tube helps maintain
downstream pressure
• Balanced supply valve minimizes the effect of supply
pressure changes
• Stack up construction can be disassembled and
serviced without removal from air line
Catalog No. Model
Type 50 Filter Regulators
MB960067
960-067-000
MB960068
960-068-000
MB960069
960-069-000
Type 51FR Filter Regulators
MB960175
960-175-000
MB960176
960-176-000
MB960177
960-177-000
Type 70 Air Regulators
MB960129
960-129-000
MB960130
960-130-000
MB960090
960-090-000
MB960092
960-092-000
MB960094
960-094-000
Description
Range
Price
General Purpose Air Filter Pipe,
Panel or Bracket Mount
0-30 psig, 40 Micron Filter
$46.58
46.58
46.58
Compact, Low Cost, Air Filter Regulator
Pipe, Panel or Bracket Mount
46.58
46.58
46.58
Precision, High Flow Air Regulator, Pipe,
Precision, High Flow Air Regulator Pipe,
0-2 psig
70.38
Type 51FR
• Excellent regulation, stability and repeatability
• Corrosion-resistant
construction (no brass
components)
• Low cost
• Small package size
• Panel, bracket or pipe
mounting
0-10 psig
66.24
0-30 psig
66.24
1-60 psig
66.24
2-150 psig
66.24
High Flow & High Pressure Gas Regulators
Type P37
• Balanced pintle design
• Bubble tight / non-relieving
• 16.5 Mbtu/hr. (110 SCFM)
• UL Pending
• AGA/CGA pending
• Bellofram rolling diaphragm
• High flow capacity
• Enclosed space use
• High volume applications
H
788
Catalog No.
P-37
MB960370
MB960372
MB960374
MB960376
P-39
MB9603441
Type P39
• High Inlet Pressure up to
5500 psig
• Output Pressure range of
0 to 500 psig
• Forged Brass with 302 Stainless
Diaphragm
• Nylon or CTFE Seat
• Also available in elektroless nickel
plating and stainless steel
Model
Description
Range
Price
960-370-000
960-372-000
960-374-000
960-376-000
High Flow LP Gas Regulator
0-10 psig
0-30 psig
0-60 psig
0-125 psig
$75.00
$75.00
$75.00
$75.00
960-344-001
High Pressure, Solid Brass Regulator
for Natural Gas & Propane
0-120 psig
$105.00
0-150 psig
$105.00
0-225 psig
$105.00
0-500 psig
$124.00
MB9603443
960-344-003
MB9603445
960-344-005
MB9603447
960-344-007
www.davis.com
Differential Pressure Transmitter/Indicator
NIST
it
4-20 mA Signal For Low Air Or Gas Pressure Positive, Negative or Differential
The Dwyer Series 605 Magnehelic® indicating transmitter simultaneously provides local indication on a large, easily read analog
scale while also converting that pressure into a standard twowire, 4 to 20 mA signal for ranges from 0 to 1 to 0 to 10" w.c.
Positive, negative or differential air and compatible gas
pressure can be measured with an accuracy of ±2% of full
scale. The basic mechanical components of the Series 605
Magnehelic® indicating transmitter are similar to those
used in the popular, time-proven Magnehelic® differential
pressure gauge. However, the Series 605 models add electrical conditioning and amplification of a resistance
change produced by a silicon strain gauge which is cemented to the range spring. This resistance change is the
result of the slight flexing which results from spring deflection as pressure is applied to the diaphragm which
is directly linked to the
spring. Refer to bulletin SERIES 605 MODELS
E-50 for additional in- AND RANGES
formation on the design, Model
Range
Minor
operation and con- Number Inches w.c. Divisions
0 to 0.1
.02
struction
of
the 605-1
0 to 2.0
.05
Magnehelic® indicating 605-2
605-3
0 to 3.0
.10
transmitter.
605-6
605-10
0 to 6.0
0 to 10
.20
.20
Standard accessories
• Mounting ring
• Snap ring
• (4) 6-32 x 11⁄4 screws (panel mount)
• (3) 6-32 x 5⁄16 screws (surface mount)
• (2) Tubing to 1⁄8" NPT adapters
• 1⁄8" NPT plugs
• Adjustment key
SPECIFICATIONS
Catalog No. Model
DW336501
DW336502
DW336503
DW336504
DW336505
PD885100
PD885105
indication
supply
Description
605-1
605-2
605-3
605-6
605-10
PD690-3-N
PD690-3-18
0-1" W.C. Gage
0-2" W.C. Gage
0-3" W.C. Gage
0-6.0" W.C. Gage
0-10" W.C. Gage
Digital Indicator 117VAC with 4 relay
output and 4-20mA
NISTPR132 —
NISTPR133 —
For additional digital indicators, Pease see page 143
Price
$186.50
186.50
186.50
186.50
186.50
229.00
478.00
99.00
130.00
www.davis.com
H
± 199,990
• UL Listed
GENERAL
Maximum Pressure
25 psig
Media Compatibility
Air & non-combustible, non-corrosive gases
ELECTRICAL
Power Supply
12 to 35 VDC
Connections
2 screw terminal block, positive & negative
Output Signal
4-20 mA DC (limited at 38 mA)
Loop Resistance
0 to 1170Ω
Warm-up Time
5-10 minutes
Current Consumption
38 mA max. DC
PERFORMANCE AT ROOM TEMPERATURE
Zero Output
4 mA
Full Scale Span
16 mA
Static Accuracy
± 2% Span
Span & Zero
Adjustable to 0.05%
Repeatability
0.5% Span
Resolution
Infinitesimal
ENVIRONMENTAL
20 to 120°F (dry air)
Compensated Temperature 30 to 120°F
Thermal Errors
± 1%/50°F
MECHANICAL
Weight
1 lb., 10 oz.
Span & Zero
Adjustments protected potentiometers,
externally accessible
1
⁄8"-27 NPT Female
789
Differential Pressure Transmitters
NIST
it
• Virtually position insensitive even at very low pressure (0.01")
• Fast response time due to low internal volume
• 1 Year warranty
SPECIFICATIONS
Measures differential, gage pressure or vacuum
Suitable for air or inert gases
Accuracy
± 1% of span (including non-linearity and hysteresis)
Connections 3⁄16” dia.
Dimensions
3.00” W x 5.15” L x 1.40” H (76 x 131 x 36 mm)
Pressure range
0-0.1˝ H2O
0-0.5˝ H2O
0-1.0˝ H2O
0-3.0˝ H2O
0-5.0˝ H2O
0-10.0˝ H2O
0-30.0˝ H2O
0-50.0˝ H2O
0-3.0 PSID
0-5.0 PSID
0-15.0 PSID
0-30.0 PSID
Price
Accessories
NISTPR132
NISTPR133
Model T10
Model T20
Model T30
Model T40
(10-30VDC In / 0-5VDC Out)
MS191221
MS191224
MS191225
MS191227
MS191228
MS191229
MS191231
MS191232
MS191236
MS191237
MS191238
MS191239
$275.00
(120 VAC In / 0-5VDC Out)
MS191191
MS191194
MS191195
MS191197
MS191198
MS191199
MS191201
MS191202
MS191206
MS191207
MS191208
MS191209
$275.00
(10-30VDC In / 4-20 mA Out)
MS1912011
MS1912014
MS1912015
MS1912017
MS1912018
MS1912019
MS1912021
MS1912022
MS1912026
MS1912027
MS1912028
MS1912029
$275.00
(120 VAC In / 4-20 mA Out)
MS191401
MS191404
MS191405
MS191407
MS191408
MS191409
MS191412
MS191413
MS191417
MS191418
MS191419
MS191420
$275.00
99.00
130.00
Pressure Transmitter with NEMA 4X Enclosure
NIST
it
4-20mA signal, two wire operation, ranges to 6000 PSI
H
790
The Series 634E Transmitters sense a single air compatible
gas or liquid pressure and produce a standard 4-20mA output
signal. Sensitive silicon strain gauge measures within ±2%
F.S.O. Convenient two wire operation simplifies installation
and expands application flexibility over comparable three or
four wire units. Zero and span adjustments are fully protected
inside a rugged die cast aluminum housing with an attractive,
durable, gray polyurethane finish. Enclosure is designed to
meet NEMA 4X requirements.
SPECIFICATIONS
Catalog No.
Model
Range in PSI
As stocked
DW182007
DW182008
DW182009
DW1820010
DW1820011
DW1820012
ML428271
NISTPR132
NISTPR133
634E-0
634E-1
634E-2
634E-3
634ES1-7
634E-5
2400
—
—
0-10
0-5
0-30
0-20
0-100
0-50
0-500
0-200
0-1000
0-800
0-2000
0-1500
Process Power Pack 24Vdc-175mA
Range in PSI
Min. range
Range in PSI
Max. range
0-20
0-60
0-200
0-800
0-2000
0-6000
Price
$199.00
199.00
199.00
199.00
199.00
199.00
130.90
120.00
145.00
Maximum pressure
1.5 x maximum range
Media compatibility
Air and non-corrosive gases and liquids
Housing
Designed to meet NEMA-4X
Power supply
12.3 to 35 VDC
Output signal
4-20mADC, 2 wire (limited at 39mA maximum
Loop resistance
0-1135Ω from 12.3 to 35 VDC
Current consumption
38mADC (maximum)
Die cast aluminum with textured gray polyurethane finish, beryllium copper Bourdon tube,
brass pressure connection.
Weight
1 lb, 12 oz. (8 kg.)
Span and zero adjustments
Protected potentiometers, located in auxiliary housing
1
Pressure connection
⁄4" NPTF x 1⁄2" NPTM
PERFORMANCE AT 70°F (21.1°C)
Zero output
4mADC
Full span output
20mADC
Accuracy
±2% of full scale output
Span and zero
Adjustable to 0.05% of full span
Warm-up time
10 minutes
www.davis.com
Differential Pressure Transmitters for Air
NIST
it
Model 750
• ± 0.75 F.S.O. Standard accuracy
± 0.25 F.S.O. optional
• Zero tracking circuitry
• High overpressure
• Fully temperature compensated
• High level output
• On board regulation
• No calibration or re-calibration
required
Ask about
2 Year
NIST
Model 860
Save 50%
• High level output
• Low power consumption
• High overpressure
on 2nd year
recalibration
PLEASE SPECIFY
SPECIFICATIONS
Type
Differential
860 or 750
Gauge
860 or 750
Range
0/1"WC to 0/40 PSI 860
0/0.1"WC to 0/5"WC 750
Input Voltage
24 VAC/24VDC
(750 only)
12-24VDC/24 VAC (860 only)
Output Signal
4-20mA
1-5VDC
1-6VDC
1-10VDC (requires 24VDC/VAC input voltage)
MODEL
750
MODEL
860
Ranges
0/0.1" H2O through
0 to 5" H2O
24 VDC/
24VAC
4-20mA
1-5VDC
1-6 VDC
1-10VDC
1% OF FSO
15 PSI
all ranges
NEMA 4x enclosure
or T35 Din Rail
Mount
0 to 65°C
Ranges
0 to 1" H2O through
0 to 40 PSI
12 to 24VDC
or 24VAC
4-20mA
1-5VDC
1-6VDC
1-10 VDC
1% OF FSO
20 PSI or 2X
F.S.P., whichever
is greater
NEMA 4x enclosure
or T35 Din Rail
Mount
0 to 60°C
Input
Output
Accuracy
Overpressure
Operating Temp.
Input
Output
Accuracy
Overpressure
Mounting options
Operating Temp.
Catalog No.
Model
Description
Price
IX499100
IX499101
IX499200
ML428271
NISTPR132
NISTPR133
860
860
750
2400
—
—
Differential Pressure Transmitter, 1" H2O up to 1 PSI
Differential Pressure Transmitter, 1 PSI and above
0.1 to 5" H2O Transmitter
Process Power Pack, 24Vdc-175mA
Please specify gauge type, range, input and output from above
$92.00
135.00
225.00
130.90
99.00
130.00
www.davis.com
H
Mounting options
SPECIFICATIONS
791
Low Range Differential Pressure Transmitters
NIST
it
SPECIFICATIONS
Full Scale
Pressure Range (FSPR)
Linearity, Best Fit
Full Scale Output
Model 276
Model 376
Resolution
Drift
Thermal Zero Shift
0-5, 10, 20, 50, 100, 300, 750" WCD
0-15, 50, 100 PSID
≤0.15% FSO
≤ 0.10% FSO
5 VDC
16 mA
Infinite
≤± 0.2% FSO per 6 months
≤± 2.0% FSO per 100°F
≤± 2.0% FSO per 100°F
0° F to + 180°F
-40°F to + 250°F
Electrical
Supply Voltage
Power Supply Regulation
10 to 42 VDC
≤± 0.10% FSO change over
supply voltage range
Output Signal
276
376
Zero and Span Adjustment
0 to 5 VDC
4-20mA
± 10% FSO min. ± 20% FSO max.
Mechanical
Pressure Connection
Line Pressure
Proof Pressure
Burst Pressure
Materials of Construction
Wetted Materials
Housing
Weight
• Extremely small size
• High accuracy to ≤± 0.15% FSO
• All 316 stainless steel wetted surfaces
• Internal field calibration circuit
• Fast response
Applications
• Automotive and aerospace test stands
• Production test stands
• Leak testing
• Laboratory / Research
• Shipboard / Marine
H
792
1/4" NPT Female
500 PSI
500 PSI
1000 PSI
316 SST
316 SST, Nickel plated zinc connector
2 lbs.
Viatran's "76" Series is a small size, low range
differential pressure transmitter that is extremely accurate. Measuring 3 3/4" in height and 2 1/4"
in width, this unit is one of the smallest wet/wet
differential pressure transmitters available.
The "76" Series measures pressures from 0 to 5"
WCD to 100 PSID. To accommodate vigorous test
applications, a line pressure rating of 500 PSI is
standard.
Model 276 has a 0 to 5 VDC signal, and the 376
offers a 4 to 20 mA output. Viatran's capacitance
sensing technology ensures long term stability
and provides an accuracy of better than ±0.15%
FSO.
When ordering please choose code that matches your specific range.
Code
Range
Code
Range
Code
Range
CB
0-5" WC
CE
0-20" WC
CN
0-100" WC
CC
0-10" WC
CK
0-50" WC
CU
0-750" WC
Code
AC
AM
Range
0-15 PSI
0-100 PSI
Catalog No.
Model
Description
VI276
VI376
276376-
Unidirectional differential pressure transmitter (choose range from list below)
Unidirectional differential pressure transmitter (wet/wet) - (choose range from list below)
—
—
—
—
Price
$850.00
850.00
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
99.00
130.00
148.00
195.00
www.davis.com
Industrial Differential/Low Pressure Transmitter
NIST
it
The new Industrial IXLdp was designed for the
measurement and control of very low pressure
and flow in industrial and process plant environments. The Industrial IXLdp transmitter features
a rugged NEMA 4X enclosure, built-in electrical
terminal box isolated from the electronics and
threaded process connections.
The IXLdp transmitter utilizes a state of the
art variable capacitance sensor with a glass-clad
silicon chip. The Si-Glas technology combines the
inherent high sensitivity of a variable capacitance
transducer with the repeatability of a micro-machined, single crystal silicon diaphragm.
The Si-Glas sensor is composed of sputtered
metals and glass molecularly bonded to silicon.
There are no epoxies or other organics in the sensor to contribute to drift or mechanical degradation over time. The silicon diaphragm withstands
high overpressure as well as shock and vibration.
• Certified 0.25% & 0.50% Accuracy
• High Overload Protection
• NEMA 4X Metal Construction
• Six Output Signals
• Easy Installation
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Maximum static (line) pressure
100 psis
Mounting Position Effect
1" W.C. and higher
≤0.1% F.S./g
0.25" up to 0.5" W.C.
≤0.5% F.S./g
0.1" W.C.
≤0.8% F.S./g
Warm-up Time
Full specification
1 second
Response Time
Standard
250ms
Output Signal Options
Current
4-20mA two wire current loop
Voltage
All voltage outputs are 3 wire
0-5 VDC
1-5 VDC
1-6 VDC
± 2.5 VDC
± 5 VDC
Power Supply Range
12-36 VDC range without effect on output
signal
Reverse Polarity Protected
Internal Zero and Span
± 10% F.S. Adjustment
Supply Current
2.6mA typical for voltage output
Physical Characteristics
Enclosure
NEMA 4X
300 series stainless steel
Process Connections
Two 1⁄4 NPT
female
Electrical
Two 1⁄2" female electrical
Connections
conduit connections
isolated
from the electronics.
Separate access cover
for terminal connections
Media
Clean, dry and non
corrosive gas
Range "H2O Output
Differential
or Gauge
• Leak Detection
Hazardous Location
Certifications
• FM approval is optional Factory
Mutual approvals intrinsically safe
for use in:
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III, Div. 1, when wired in
accordance with Dresser drawings
71B241 (1-3)
Catalog No. Price
(± 0.25%)
Catalog No. Price
(± 0.50%)
0.10"
4-20 mA
AS910501
$718.00
AS91502
0.50"
1-5 VDC
AS910507
658.00
AS910508
1.00"
4-20 mA
AS910509
633.00
AS910510
3.00"
4-20 mA
AS910513
633.00
AS910514
3.00"
1-5 VDC
AS910515
633.00
AS910516
5.00"
4-20 mA
AS910517
633.00
AS910518
10.00"
4-20 mA
AS910521
633.00
AS910522
25.00"
4-20 mA
AS910525
633.00
AS910526
25.00"
1-5 VDC
AS910527
633.00
AS910528
50.00"
4-20 mA
AS910529
633.00
AS910530
100.00"
4-20 mA
AS910533
633.00
AS910534
100.00"
1-5 VDC
AS910535
633.00
AS910536
Standard 1⁄4" NPT female connection with screw terminal electrical connection.
Optional outputs and bidirectional ranges available upon request.
ML428271
2400
NISTHP3
NISTHP4
$538.00
478.00
453.00
453.00
453.00
453.00
453.00
453.00
453.00
453.00
453.00
453.00
130.90
125.00
159.00
H
Performance Specifications
Accuracy Class
(70°F Ref.)
Standard
± 0.5% of F.S.
Optional
± 0.25% of F.S.
Accuracy: F.S.
± 0.5% ± 0.25%
Non-linearity
Terminal point
± 0.4
± 0.2
Best straight line ± 0.3
± 0.15
Hysteresis
± 0.02
± 0.02
Non-repeatability ± 0.05
± 0.03
Stability
± 0.5% F.S./year
Standard Ranges (Inches W.C.)
Unidirectional Ranges
Differential of Gage
0/0.1
0/2.0
0/10
0/50
0/0.25
0/2.5
0/15
0/100
0/0.50
0/3.0
0/20
0/150
0/1.0
0/5.0
0/25
0/200
Bidirectional Ranges
Compound or Vacuum
± 0.05
± 2.5
± 20.0
± 0.25
± 5.0
± 25.0
± .50
± 10.0
± 50.0
± 1.0
± 15.0
± 100.0
Environmental Characteristics
Temperature Limits
Storage
-40 to 210°F
Operating
-20 to 185°F
Compensated 0 to 160°F
Thermal Coefficients
0.5% Acc.
0.25% Acc.
Zero
± 0.02% F.S./°F ± 0.01% F.S./°F
Span
± 0.02% F.S./°F ± 0.01% F.S./°F
Functional Characteristics
Overpressure Limits
Proof pressure
15 psid
Burst differential pressure 50 psis
• Precision Fan Tracking
• Filter Monitoring
• Operating Room Pressurization
• Laboratory Fume Hood Control
• Lab/Clean Room Pressurization
• Precise Velocity Pressure
Measurement
• Laminar Flow Measurement
• Furnace Draft Measurement
• Oven Air Flow Control
• Stack Gas Flow Measurement
• Baghouse Monitoring
• Combustion Air/Fuel Ratio Control
Not for Use on Liquids
www.davis.com
793
Stainless Steel Wet to Wet Differential Pressure Transducer
NIST
it
• All welded 316 stainless steel construction
• Utilizes state of the art silicon piezoresistive sensor technology
• Pressure ranges from 8 psid up to 500 psid
• Outputs available in 4 to 20 mA and low power 1 to 5 VDC
• Excellent accuracy and long term stability
• Temperature compensated for extreme outdoor
environmental conditions
• Compact size and light weight; less than 2 pounds
• Designed to meet NEMA 4X outdoor weather and
corrosion resistance
• Low cost
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
SPECIFICATIONS
Pressure Range
Reference Accuracy (BFSL)
Null Offset
Span Offset
1 Year Stability
Outputs
Temperature Effects on Null
Temperature Effects on Span
Burst Pressure
H
794
Position Effects
Vibration
Shock
Process Connection
Weight
Pressure Code
Differential Pressure (PSID)
Up to 500 psid
± 0.5% FS
(± 1% FS for 6 psid pressure range)
1% FS
1% FS
< 0.25% FS
1-5 VDC
4-20mA
8-14 VDC
12-30 VDC
-40 to 140°F (-40 to 60°C)
23 to 131°F (-5 to 55°C)
± 2% FS per 50°F (28°C)
± 2% FS per 50° F (28°C)
5X FS from high pressure side
3X FS from low pressure side
Null shifts up to 0.05 psi
10Gm 55-2000 Hz.
30G
316L Stainless Steel
316 Stainless Steel
1/2 NPT Female
3/4 NPT Female: 3 ft. 22 AWG cable
1.8 lbs.
0006
6
0015
15
0030
30
0060
60
0100
100
0150
150
0200
200
0300
300
Catalog No.
Model
Description
AM8210006
AM8210015
AM8210100
AM8210200
AM8210500
821TD0006BLS
821TD0015BLS
821TD0100BLS
821TD0200BLS
821TD0500BLS
0-6 psi Differential Pressure Transducer, 4-20 mA
0-15 psi Differential Pressure Transducer, 4-20mA
—
—
—
—
0500
500
Price
$425.00
425.00
425.00
425.00
425.00
Accessories
NISTHP3
NISTHP4
NISTHPQ3
NISTHPQ4
125.00
159.00
238.00
238.00
www.davis.com
Wet/Wet Differential Pressure Transmitter
NIST
it
SPECIFICATIONS
Performance
Accuracy
± 1⁄2% of differential pressure range (includes nonlinearity and hysteresis), or ± 1% for 6 psid
(50 kPA) range
Environmental
Process wetted surfaces are 316 stainless steel
Operating temperature range
0°C to 50°C (32°F to 122°F)
Shock resistance
10G (11 ms)
Vibration resistance
5G, 3 to 50 Hz
Electrical Connectors
Polarized Euro Plug/Connectors
Connections
Pluggable terminal block for wire 14 to 26 AWG
Mating connector is supplied
Connection to enclosure ground is provided
Connector rating
10 Amps/300 volts
Material
Glass-filled polyester
Physical
Dimensions
3.56" x 4.54" x 2.18" (90 x 115 x 55 mm)
Enclosure material
Aluminum Alloy #A380
Cover screws
M4 Stainless Steel, non-magnetic
Finish
Black epoxy paint
Pressure port connections
1/8-28 female NPT
Max static pressure
100 psi up to 15 psid, 300 psi for 200 psid
ELECTRICAL SPECIFICATIONS
Model W10
Supply Voltage
Supply current
Output
11 to 32 Vdc (14.5 to 32 Vdc for 10 volt output).
Protected against reversal of polarity
6 mA
0 to 5 Volts, linear
0 to 10 Volts, linear
Sink or Source 3.5 mA
Protected against short circuit
Model W20
Nominal Input Voltage
Power Consumption
Operating Voltage Range
24 Vac
1.5 W
20 to 30 Vac
120 Vac
1.5 W
100 to 140 Vac
240 Vac
1.5 W
200 to 260 Vac
Output can sink or source 3.5 mA
Output voltage is protected against short circuit
Transformer isolation between power supply and output 2500 Vrms
Model W30
Supply Voltage
11 to 32 Vdc
Protected against reversal of polarity
Output limited to approx. 3.85 mA at low end of span and a 27 mA at upper end of span
Pressure Ranges
0-6 psid
0-10 psid
0-15 psid
0-30 psid
0-60 psid
0-100 psid
0-150 psid
0-200 psid
Price
Catalog No.
ML428271
NISTHP3
NISTHP4
DC Model-W10
0-5 VDC output
MS13152R
MS13252R
MS13352R
MS13452R
MS13552R
MS13652R
MS13752R
MS13852R
$435.00
Model
2400
—
—
INPUT/OUTPUT SPECIFICATIONS
W10
3-Wire
DC Voltage In
DC Voltage Out
4-Wire
24, 120 or 240 VAC In
DC Voltage Out
2-Wire
DC Voltage In
4-20 mA Out
4-Wire
24, 120, 240 VAC In
4-20 mA Out
W20
Operating Voltage Range
20 to 30 Vac
100 to 140 Vac
200 to 260 Vac
W30
W40
120 VAC Model-W20
0-5 VDC output
DC Model-W30
4-20 mA output
MS23152R
MS23252R
MS23352R
MS23452R
MS23552R
MS23652R
MS23752R
MS23852R
$445.00
Description
MS3312R
MS3322R
MS3332R
MS3342R
MS3352R
MS3362R
MS3372R
MS3382R
$435.00
• No moving parts to
wear out
• Proven long term
stability of
piezoresistive devices
• Virtually position
insensitive
120 VAC Model-W40
4-20 mA output
MS4312R
MS4322R
MS4332R
MS4342R
MS4352R
MS4362R
MS4372R
MS4382R
$445.00
130.90
125.00
159.00
www.davis.com
H
Model W40
Nominal Input Voltage
Power Consumption
24 Vac
1.5 W
120 Vac
1.5 W
240 Vac
1.5 W
Isolation between power supply and output is 2500 Vrms
Receiver resistance can be from 0 to 650 Ohms
Output limited to approx. 27 mA at the upper end of span
The Series W pressure transmitters are designed to measure low differential pressures of
liquids or gases. A wide selection of standard pressure ranges and electrical ratings is available.
Series W transmitters are an excellent choice
for many HVAC, process and automation monitoring requirements. Typical applications include
measurement of differential pressure across flow
elements, heat exchangers, pumps, filters, liquid
level monitoring and other demanding differential
pressure measurement and control applications.
The transmitters are housed in a compact
heavy duty gasketed cast aluminum enclosure
and are designed to IP 65 of IEC529 standards
and NEMA 4. The die cast aluminum enclosure
incorporates a recessed neoprene gasket to prevent ingress of moisture or dust.
795
Wet-Wet Differential Pressure Transducers
The Model 230 is a high level output, low differential pressure transducer designed for wet to wet differential pressure measurements of liquids or gases. A fastresponse capacitance sensor and signal conditioned electronic circuitry provide a
highly accurate, linear analog output proportional to pressure. Both unidirectional
and bidirectional pressure ranges are available for applications with line pressure up
to 250 psig. All parts exposed to the pressure media are stainless steel and elastomer
seals. The 230 has a NEMA 4/IP65 rated package to withstand environmental effects.
The model 230 can be supplied with an optional 3-valve manifold assembly for
ease of installation and assembly. The 3-valve manifold is a machined brass body requiring no internal pipe connections, thereby eliminating the risk of internal leaks.
The manifold’s rugged, yet compact, construction requires minimum space for installation and use. The 230 bleed ports allow for total elimination of air in the line and
pressure cavities. If the Model 230 is ordered with the 3-valve manifold, the system is
shipped completely assembled and ready for a wall or piping mounting.
SPECIFICATIONS
• NEMA 4/IP65 Rating
• High Accuracy
• Low Cost
• Fast Response
• Gas and Liquid Compressors
• Low Differential Ranges
• No Liquid Fill Diaphragms
Ask about
2 Year
NIST %
Applications
• Process Control
• Liquid Level Measurement
• Refrigeration Equipment
• Filter Monitoring
• Compatible
Catalog No.
H
796
Save 50
on 2nd year
recalibration
Model
SE230100
SE230101
SE230102
SE230103
SE230104
SE230105
SE230106
SE230107
SE230108
SE230109
SE230110
SE230111
SE230112
SE230113
SE230114
SE230115
SE230116
SE230117
SE230118
SE230119
SE230120
SE230121
SE230122
SE230123
SE230124
SE230125
SE230126
SE230127
Accessories
2301001PD2F11B
2301001PD2F11B
2301005PD2F11B
2301010PD2F11B
2301025PD2F11B
2301050PD2F11B
2301100PD2F11B
2301001PD2F2DB
2301002PD2F2DB
2301005PD2F2DB
2301010PD2F2DB
2301025PD2F2DB
2301050PD2F2DB
2301100PD2F2DB
2301001PD3D11B
2301002PD3D11B
2301005PD3D11B
2301010PD3D11B
2301025PD3D11B
2301050PD3D11B
2301100PD3D11B
2301001PD3D2DB
2301002PD3D2DB
2301005PD3D2DB
2301010PD3D2DB
2301025PD3D2DB
2301050PD3D2DB
2301100PD3D2DB
NISTPR132
NISTPR13
—
—
Performance Data
Accuracy
Response Time
Environmental Data
Operating Temperature Range °F (°C)
Compensated Temperature Range °F(°C)
Zero shift %FS/100°F(%FS/50°C)
Span Shift %FS/100°F(%FS/50°C)
Case
Pressure Fittings
Weight (approx.)
Circuit
Excitation
Output
Circuit
Supply Voltage
Output
± 0.25% FS (FSS)
30 to 50 milliseconds
0 to + 175 (-18 to + 80)
30 to + 150 (-1 to + 65)
2.0 (1.8)
2.0 (1.8)
Stainless Steel/Aluminum
Barrier strip terminal block with conduit
enclosure & 0.875 DIA conduit opening.
1/4”-18” NPT internal
14.4oz
3-Wire (Exc., Out, Com)
9 to 30 VDC
0 to 5 VDC
2-Wire
9 to 30 VDC
4 to 20mA
Description
Price
Differential pressure transducer, 4-20 mA output, 0-1 PSID
Differential pressure transducer, 0-5 DCV output, 0-1 PSID
Pressure transducer with 3 valve manifold, 4-20 mA output, 0-1 PSID
Pressure transducer with 3 valve manifold, 0-5 VDC output, 0-1 PSID
$395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
395.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
620.00
99.00
130.00
www.davis.com
Low Differential Pressure Alarm/Controller
NIST
it
The Model DA is a controller for the monitoring
of low differential pressures. It combines in one
enclosure a low pressure transducer, a digital display and up to two alarms. It is typically used for
the monitoring of clean room pressures, duct static and velocity pressures, as well as filter differential, draft, fume hood and other low pressure applications.
The pressure sensing element is a
differential capacitance cell for pressure measurements ranging from
0.1 to 10.0 inches of water (25 Pa
to 2.5 kPa), or a piezoresistive
(silicon) sensor for pressures from
10 inches of water to 30 psi (2.5
kPa to 200 kPa).
The display section has 31⁄2 digits with bright, easy to read
LED's. The display is factory-calibrated to read in engineering
units.
The alarm section is offered
with 1 or 2 alarms.
Barb fittings ( 3⁄16" O.D.) and pluggable terminals with screw clamps are provided at the rear
for quick and simple field connections.
SPECIFICATIONS
Accuracy of Reading
Setpoint Accuracy
Power Requirements
Power Consumption
Alarm Outputs
Dimensions
Standard, ± 1% of span + 1 digit
± 0.2% of span + 1 digit (including repeatability)
105—135 VAC, 50/60 Hz or
210—265 VAC, 50/60 Hz
2.5 VA
Non-interchangeable power and alarm plugs
with #4-40 screw clamps; wire range is
14—22 AWG
1-spdt 0.5A@120 VAC- electromechanical relay
1
⁄8 DIN 1.89" H x 3.78" W x 5.71" D
RANGE CHART — PRESSURE
Resolution
Capacitance cell
0.001"
0.001"
0.01"
0.01"
0.01"
0 to 30.0"
0 to 50.0"
0 to 3 psid
0 to 5 psid
0 to 15 psid
0 to 50 psid
0.1"
0.1"
0.01"PSID
0.01"PSID
0.01"PSID
0.1"PSID
Silicon sensor
Dual Alarm/Controller with 2 relays
(1 rising pressure, 1 falling pressure)
Catalog No.
Pressure Range
MS191131
MS1911311
MS1911312
MS1911313
MS1911314
MS1911315
MS1911316
MS1911317
MS1911318
MS1911319
MS1911310
Accessories
NISTPR132
NISTPR133
Price
0-0.1˝ H2O
0-0.5˝ H2O
0-1˝ H2O
0-5˝ H2O
0-10˝ H2O
0-30˝ H2O
0-50˝ H2O
0-3 PSID
0-5 PSID
0-15 PSID
0-50 PSID
$425.00
425.00
425.00
425.00
425.00
425.00
425.00
425.00
425.00
425.00
425.00
99.00
130.00
www.davis.com
H
Pressure
Range
0 to 0.1" H20
0 to 0.5" H20
0 to 1.0" H20
0 to 5.0" H20
0 to 10.0" H20
797
Air/Gas Pressure Indicator with Transmitter Output
NIST
it
Differential, Positive or Negative Pressure
⁄8 DIN Housing, 4-20 mA Output
1
Measure and control compatible air or gas pressure and converts it into a 31⁄2 digit display with a
4-20 mA output signal. Positive, negative or differential pressures can be measured with a full
span accuracy of ±0.5%. Ranges are available from
0-3 in. w.c. (0-0.75 kPa) to 0-100 PSI (0-690 kPa).
Versatile circuit design enables use in 2, 3 or 4wire current loops.
H
798
Catalog No. Model
Description
DW600
DW601
DW602
DW603
DW604
DW605
DW606
DW607
DW608
DW609
DW610
DW611
DW612
NISTPR132
NISTPR133
Pressure Indicator 0-3 in. w.c.
Pressure Indicator 0-10 psi
621-3
621-6
621-10
621-20
621-40
621-100
621-200
621-1000
621P-10
621P-20
621P-30
621P-50
621P-100
—
—
Range
Max. Pressure Price
5 psi
5 psi
5 psi
11 psi
11 psi
29 psi
29 psi
150 psi
58 psi
58 psi
58 psi
150 psi
150 psi
$239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
239.00
99.00
130.00
SPECIFICATIONS
General
Media Compatibility
Housing
Weight
Adjustments
Dimensions
Electrical
Power Supply
Output Signal
Loop Resistance
Barbed 1⁄8" (3mm) I.D. tubing
Air and non-corrosive gases
Terminal block
Gray PVC type I
8.5 ounces (241 grams)
Accessible potentiometers
Cutout: 1.775" x 3.625" 4.5" depth
10 - 35 VDC -2, 3 or 4 wire
16 -26 VAC -4 wire
4-20 mA DC (limited at 38 mA DC)
0 - 1300 ohms DC max
0 - 1200 ohms AC max
Performance at 70°F (21.1°C)
Zero Output
4 mA DC
Full Span Output
16 mA DC
Accuracy
± 0.5% of full span output (Includes linearity,
hysteresis and repeatability)
Span and Zero
Adjustable to 0.05% of full span
Warm-up Time
10 minutes
Environmental
20 to 120°F (-6.7 to 49°C)
Thermal Errors
± 0.02%/°F typical
Metric ranges available upon request.
www.davis.com
NEMA 4 Pressure Switches
NIST
• Wide selection of adjustable ranges
• Internal reference scales and
adjustment lock
• Enclosure design permits safe and
easy access for wiring
• Many models available from stock
• Choice of 1⁄2" NPT electrical connection
or knockouts
• Internal reference scale
• Adjustment lock for tamper-resistance
• 1 piece low copper aluminum
enclosure and sensor body
it
SPECIFICATIONS
Approvals
Set Point
Repeatability
Switch Output
Electrical Rating
Weight
Pressure
Connection
UL recognized component.
Optional CSA certification.
± 1% of adjustable range
(1) SPDT. Switch may be
wired “normally open”
or “normally closed”
15 amp 125/250 VAC
resistive
Approx. 2 lb.
Models 190-194: 1⁄2" NPTF
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
Pressure Model Chart Type H100
316 stainless steel diaphragm and 1⁄2" NPTF pressure connection
Catalog
No.
Model
VC148
VC149
VC150
VC151
VC152
NISTPR132
NISTPR133
190
191
192
193
194
—
—
Stock Numbers
for Type H100
95303
95310
95317
95324
95331
Adjustable Range
PSI
Bar
5-30 psi
0.34-2.07
10-100 psi
0.69-6.90
15-300 psi
1.03-20.69
20-500 psi
1.38-34.48
80-1700 psi
5.52-117
Deadband
Lower 75%
Top 25%
range span
range span
1-3
1-8
3-18
4-30
5-120
6 max
15 max
25 max
45 max
150 max
General Purpose Pressure Switches
Proof
Pressure
Price
2500 psi
2500 psi
2500 psi
2500 psi
2500 psi
$122.00
122.00
122.00
122.00
122.00
99.00
130.00
NIST
it
• Low cost, small size and light weight for OEM applications
• Wide selection of adjustable ranges within 30" Hg VAC to
100 PSI
• Bellows sensors for ± 1% repeatability
• One 15 amp switch output
H
Phosphor bronze bellows and 1⁄4" NPTF brass pressure connection
Catalog
No.
Model
VC153
VC154
VC156
VC157
NISTPR132
NISTPR133
218
222
226
230
—
—
Stock Numbers
for Type J40
9634
9591
9608
9624
Adjustable Range
PSI
Bar
30"Hg VAC to 0 PSI
-1.02-0
0-20 psi
0-1.38
0-50 psi
0-3.45
0-100 psi
0-6.90
Deadband
1.0-2.5" Hg VAC
0.2-1.3 psi
0.2-1.3 psi
1.0-2.3 psi
Proof
Pressure
30"Hg VAC
30 psi
75 psi
110 psi
Price
$57.00
55.00
54.00
55.00
99.00
130.00
www.davis.com
Pressure Model Chart Type J40
799
Pressure/Differential Switch
NIST
it
Watertight Enclosure Meets NEMA 3, 4, 4X and 13 Requirements
• Corrosion resistant enclosure meets NEMA 3, 4, 4X, 13 and IP66
• Choice of switch elements for all applications, including hermetically sealed
• Wide choice of wetted materials, including all-welded Monel or stainless steel
• Fixed or limited adjustable deadband
• Approved for UL, CSA and FM ratings
• Choice of actuators, including designs for fire-safe and NACE applications
• Standard pressure connection materials
Pressure psi ranges -316 SS
Differential psid ranges
-Nickel-plated brass
Pressure and differential inches of water ranges
-Carbon steel
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
This general purpose
Ashcroft® switch series is ideal
for use in virtually all Industrial
and OEM applications.
H
800
SPECIFICATIONS
Description / Maximum Electrical Ratings
UL/CSA listed SPDT
General purpose
15A, 125/250/480 Vac
1/2A, 125 Vdc
1/4A, 250 Vdc
Please inquire for additional switches including dual switch models
Actuator Seal
Code &
Process
Range
Material
Temp.
Limits °F
Vac
0-600 1000 2000H2O
psi
psi 3000 psi
B-Buna N 0 to 150° •
•
•
•
Standard
V-Viton®
20 to 300° •
•
•
Available upon
request
T-Teflon®
0 to 150° •
•
•
•
Available upon
request
S-St.St.
0 to 300°
•
•
Standard
P-Monel
0 to 300°
•
•
Available upon
request
Diaphragm &
O-Ring
Catalog No. Model Material
AS775800
AS775802
AS775803
AS775806
AS775807
AS775809
AS775810
AS775811
AS775812
AS775813
AS775826
AS775827
AS775829
AS775830
AS775831
AS775832
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
B400
D400
Description
Range
Price
Buna N
Buna N
Buna N
Buna N
Buna N
Buna N
Buna N
Buna N
Buna N
Buna N
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Buna N
Buna N
Pressure Switch
30" Hg Vac
$153.00
Pressure Switch
30" Hg Vac/30 psi
153.00
Pressure Switch
30" Hg Vac/60 psi
153.00
Pressure Switch
10" H2O
163.00
Pressure Switch
60" H2O
163.00
Pressure Switch
15 psi
133.00
Pressure Switch
60 psi
133.00
Pressure Switch
100 psi
133.00
Pressure Switch
200 psi
133.00
Pressure Switch
600 psi
133.00
Pressure Switch
60 psi
178.00
Pressure Switch
100 psi
178.00
Pressure Switch
600 psi
178.00
Pressure Switch
1000 psi
223.00
Pressure Switch
3000 psi
193.00
283.00
Differential Pressure 30" H2O
Switch
283.00
AS775834
D400
Buna N
Switch
283.00
AS775835
D400
Buna N
Switch
AS775838
D400
Buna N
Differential Pressure 100 psid
318.00
Switch
AS775839
D400
Buna N
Differential Pressure 400 psid
325.00
Switch
NISTPR132
—
99.00
NISTPR133
—
130.00
Stainless Steel, Differential Switches are available upon request. Upon request Viton®, Teflon® and Monel
materials are available for diaphragms and o-rings
www.davis.com
N-Series Electronic Pressure Switch
NIST
it
For reliability in the toughest applications!
Pressure sensor is a stable thin film transducer. The signal processed produces an output
to an electro-mechanical relay, rated for
10,000,000 cycles at rated load. Narrow deadbands can be adjusted to less than 0.5% of
range, solving many pipeline and elevated tank
applications that are beyond the reach of mechanical products.
The indicating model is ideally suited for applications where both pressure indication and a
switch output for alarm, shutdown, control or
interlock are needed.
•
•
•
•
•
•
•
•
•
•
Thin film pressure sensor (transducer)
Diaphragm – 17-4 PH SS
Pressure Connection – AISI 316 SS
Watertight meets NEMA 3, 4, 4X, 13 and IP66. Optional enclosure for
NEMA 7, 9, Division I or II Hazardous locations
Pressure settings to 20,000 psi.
Status Light – Indicate Display Function
-Process Pressure
-Setpoint
-Resetpoint
-Relay Output Status
Big and bright 3 1⁄2 digit LED display indicates process pressure ± 1%
3⁄4 NPT electrical connection for easy wiring
Multi-turn potentiometers make setpoint and deadband adjustment easy
10 AMP SPDT relay contacts for maximum flexibility in electrical
output needs
ORDERING INFORMATION N-SERIES PRESSURE SWITCH MODEL NUMBER:
To specify the exact switch desired select entries from appropriate tables as shown in example below
1
2
N P A
N
4
1 – FUNCTION
4
D
L
5
S
0
1
$375.00
NPI – Single setpoint, adjustable deadband,
process and setpoint indication
$475.00
L – 110 Vac, 50/60Hz
C – 24 Vdc
X E A
60 PSI
N/C
S01 – 1⁄8 NPT Male
N/C
S02 – 1⁄4 NPT Male
N/C
S03 – ⁄8 NPT Female
N/C
S04 – 1⁄4 NPT Female
N/C
1
3 – OUTPUT
N/C
S05 – 7⁄16-20 SAE - 1⁄4 SAE
N/C
S06 – 1⁄2 NPT Male 1⁄4 & NPT Female
N/C
S07 – 1⁄4 AMINCO – Female
N/C
6 – OPTIONS
XEA – External adjustment (N4 only)
Accessories
NISTPR132
NISTPR133
NISTPRQ132
NISTPRQ133
25.00
Nominal
Range
60
100
200
300
500
750
1000
2000
3000
5000
7500
10,000
15,000
20,000
Setpoint
Limits
3-60
5-100
10-200
15-300
25-500
35-750
50-1000
100-2000
150-3000
250-5000
375-7500
500-10,000
750-15,000
1000-20,000
psi
Proof
120
200
400
600
1000
1500
2000
4000
4500
7500
9000
12,000
18,000
24,000
psi
Burst
480
800
1600
2400
4000
6000
8000
16,000
20,000
22,500
25,000
30,000
45,000
60,000
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
99.00
130.00
148.00
195.00
www.davis.com
$50.00
H
7 – NOMINAL RANGE
PERFORMANCE TABLE (psi)
N/C
5 – PRESSURE PORT
N7 – Explosion proof NEMA 3, 4, 4X 13, 7, 9 & $140.00
IP66 – Not available with Model NPI (display)
10A, 250 Vac
10A, 30 Vdc
7
N/C
V – 250 Vac, 50/60 Hz
2 – ENCLOSURE
D – SPDT Relay
6
4 – POWER REQUIREMENT
NPA – Single setpoint, adjustable deadband
N4 – Watertight NEMA 3, 4, 4X, 13 and IP66
3
801
Bürkert "All-In-One" Pressure Transmitter/Switch
• All In One - Indication, Controller, Transmitter, ON/OFF Relay and AS-i
Control in One Device
• Programmable Monitoring and ON/OFF control system for easy fluid control
systems
• Complete communication due to external setpoint, easy link or AS-interface
• ON/OFF Control
- Stabilized pressure of N2 in liquid tanks
- Control of pressure tanks for air
- Control if fluid pressure tanks
• Monitoring
- Monitoring of fluid in low pressure in Reverse Osmosis
systems (water treatment)
- Monitoring of pressure in autoclaves
Please inquire for pricing and ordering information.
This Transmitter/Switch is specifically
designed to switch a valve, pump, heaters,
etc... and to establish and ON/OFF control
loop. The switching point can be programmed with the 3 keys on the display or
from an external logic controller via a 420mA loop. Additionally, the process value
can be transmitted to the PLC (4-20 mA).
The connection to the process in the piping
is done with standard fittings.
H
802
SPECIFICATIONS
Process Specifications
Pipe Diameter
SO01 or SO05
Measuring Range
Switching Accuracy
Repeatability
Fitting
Housing Material
Front Panel Foil
Sensor Element
Wetted Parts
Min. Service Life
of Pressure Cell
Voltage Supply
Reversed Polarity of DC
Transistor Output
or optional Relay Output
Input External Setpoint
Output Process Value
Optional AS-Interface
Current Consumption
Short Circuit Protection
Recommended Max. Cable
Length for Power Supply
Environmental Specifications
Max. Fluid Temperature
Type of Protection
Any pipe with 1/2" FNPT connection - Type
0-29, 73, 145, 290, 725 PSI
± 1.5% full scale
Max. 0.25... 1% full scale
Type SO01 or SO05
PC + 20% glass fiber
Polyester
Ceramic cell (AI , O )
Stainless Steel
100 million cycles
2
2
12-30 VDC
Protected
NPN/PNP, open collector 5-30 VDC, 700 mA
3 A, 230 VAC, or 3 A, 30 VDC programmable
4-20 mA
4-20 mA
Fieldbus
Max. 80 mA (no load)
Yes
328 ft. shielded
26 to 22 AWG
212°F
-4°F to 140°F
NEMA 4 (IP65) with connector plugged in
www.davis.com
Pressure Logger
NIST
it
PR100/PR300/PR500
The Pressure Logger records pressure from 0 to
100 PSI, 0 to 300 PSI or 0 to 500, it has a
Waterproof Stainless Steel case and a 5 year battery. Its compact size, smaller than a hockey puck,
is perfect for tight locations and outdoor applications. Eliminate changing chart paper and pens.
View data in real time or download data when you
need it.
User friendly software makes it simple to integrate recorded pressure data into documents and
spreadsheets, giving results a professional, polished look. When fulfillment of regulatory requirements or accurate recording of pressure for quality control is needed, the PR100, PR300 and PR500
are the perfect instruments!
SPECIFICATIONS
Pressure Ranges
PR100, 0 - 100 PSI; PR300, 0 - 300 PSI; PR500, 0 to 500 PSI
Accuracy
± 1% full scale
Ambient Operating Conditions
32 to + 122F (0 to + 50°C); 0 - 100% RH
Approvals
CE
Battery Type
Lithium 3.6V, user replaceable
Battery Life
5 year typical @ 1 minute sample intervals
Fitting
1/4" NPT Thread, 5/8" Hex
Sample Point Storage
7936 points
Sample Interval
User Selectable from 10 sec. to 24 hours in 10 sec. increments
Download Time
45 seconds
Resolution
0.1 PSI
Response Time
10 seconds typical
Enclosure
316 Stainless Steel
Dimensions
1.064" x 1.975" DIA (2.70cm x 5.02cm DIA)
Weight
4.0 oz
Software & Download Cable Specifications
Compatible with: Windows™ 95,98,2000 & NT
PC Requirements: PC w/386 or better microprocessor, 4M RAM, 1 free COM (serial) port, CD drive
Cable Type/Length: 9 pin male D-shell to male 2.5mm stereo plug, 6' long
Computer Interface: RS-232 COM (serial) port
Version Required (minimum): 6.0.4.2
Model
Description
DK976518
DK976519
DK976531
DK015
Accessories
DK1164117
DK976527
DK116323
DK976528
DK976529
NISTDL01
NISTDL02
NISTDLQ01
NISTDLQ02
PR100
PR300
PR500
A015
0 to 100 PSI Pressure Logger
Software and Download Cable
A791
A793
R022
A792
A717
—
—
—
—
Pressure Fitting Accessory Kit
Fire Hydrant Adapter Kit
Filter Kit
Steam Pressure Pigtail
Locking Case
Price
$399.00
399.00
499.00
69.00
89.00
150.00
25.00
30.00
45.00
200.00
250.00
300.00
375.00
www.davis.com
Catalog No.
H
803
Pressure Recorders
NIST
it
These Pressure Recorders with remote sensors
employs advanced microcontroller design that enables this versatile instrument to accurately measure and record pressures. Selector switches located on the face panel allow for the recording of
3 different pressure range at 4 different
recording speeds.
• Advanced microcontroller
design
• Large LED digital display shows
sensor pressure
• Front panel selectable — All
controls are located on front
panel for fast and easy setup
• Remote pressure sensor has a
6' long cord with a stainless
steel 17-4 pressure port 1⁄4 NPT,
burst pressure 2500PSI rated
for any gas or fluid compatible
with 17-4 stainless steel
• Standard adapter for 120 VAC
operation (220 VAC optional)
• Battery backup assures normal
operation during power
interruptions
• Furnished complete with 2 cartridge pens & 60 (6" diameter)
assorted charts
• Free standing or wall mounted
• Weather proof NEMA type 4X
(CSA type 4) case optional
• 6" Diameter Chart
• Single or continuous chart
rotation
• 3 pressure ranges
• 4 recording speeds
• 12 VAC operation — Allows use
in vehicular or marine
operations
• Snap-on extra support legs
Ask about
2 Year
NIST
Save 50%
on 2nd year
recalibration
H
804
Catalog No.
Model
Description
SUCR87P
CR87P
SUCR87B
CR87PB
NISTRC1
NISTRC2
—
—
PSI Pressure Recorder,
110-120 V, 50/60 Hz
BAR Pressure Recorder,
220-240 V, 50/60 Hz.
with Data
Pens
SC7741711
SC774172
SC774173
Charts
Pressure
Range
0 - 500 PSI
0 - 150 PSI
0 - 50 PSI
—
—
—
Price
Chart Recorder Pen (Black)
Chart Recorder Pen (Red)
Chart Recorder Pen (Blue)
6 Hrs.
24 Hrs.
7 Days
31 Days
6H500PSI
6H150PSI
6H50PSI
24H500PSI
24H150PSI
24H50PSI
7D500PSI
7D150PSI
7D50PSI
31D500PSI
31D150PSI
31D50PSI
$375.00
375.00
125.00
199.00
7.73
7.73
7.73
18.00
18.00
18.00
SPECIFICATIONS
Pressure range
PSI Model
Pressure range
BAR Model
Ambient operating temperature range
Ambient operating relative humidity
Chart speed
Chart rotation mode
Chart speed accuracy
Chart diameter
Pressure accuracy
Display
Power Supply
Battery life
Battery backup
Case size
Weight
0 to 500 PSI, 0 to 150 PSI
0 to 50 PSI
0 to 35 BAR, 0 to 10 BAR
0 to 3.5 BAR
+ 32°F to + 140°F
(0°C to + 60°C)
96% maximum
selectable — 6 hours,
24 hours, 7 days, 31 days
Selectable — single turn or
continuous
+/- 1%
6 inches
+/- 1% F.S.
3 digit LED 0.5"
120 VAC, 50/60 Hz.
(220-240 VAC, 50/60Hz.
optional - CR87PB)
48 hours continuous use
8 AA Alkaline batteries
(not included)
9 1⁄4" x 7 1⁄4" x 2 3⁄4"
4 lbs., 7 oz.
www.davis.com
8" Pressure Recorders
NIST
it
Place these portable Pressure Recorders anywhere you want a written record
of pressure. You don’t even need to be present to monitor the results. Please
keep in mind that pressure recorders are not suitable for monitoring ammonia,
acids, salt water or other corrosive substances.
Applications
• Pressure studies and tests on gas
and water lines
• Monitor line pressure on
production lines
• Field verification of customer complaints
• Monitor steam pressure in plant
SPECIFICATIONS
Catalog
No.
DK1164108
DK1164109
DK1164112
DK1164113
Catalog No.
DK1164117
DK116212
NISTRC1
NISTRC2
Chart
Size
8"
8"
8"
8"
Accuracy
Mount
Ambient Operating
Temperature
Response Times
Power
Includes
Model
PR8100PB7S
PR8100PB24S
PR8200PB7S
PR8200PB24S
Model
A791
P222
—
—
± 2% full scale
1
⁄4 " male NPT connection, nickel plated brass
-22 to + 122°F (-30 to + 50°C)
1 to 5 seconds
Battery operated quartz chart movement (AA)
One box of 60 charts, pen and
instruction manual
Recording
Recorder
Range
Time
Price
0 to 100PSI
7-day
$499.00
0 to 100PSI
24-hour
499.00
0 to 200PSI
7-day
499.00
0 to 200PSI
24-hour
499.00
Description
Accessory Kit (washers, fittings & adapters)
Six-pack standard red pens
Weather Resistant Pressure Recorders
Replacement
Chart No.
C412
C410
C436
C456
60 Charts
Price
$18.00
18.00
18.00
18.00
89.00
30.00
125.00
159.00
NIST
it
The PW4 weather resistant pressure recorder is housed in a fiberglass NEMA
4X case. This lightweight 4" recorder will provide protection against corrosion,
windblown dust and rain, splashing water and hose directed water.
These pressure recorders are not suitable for monitoring ammonia, acids, salt
water or other corrosive substances. The PW 461 and PW 462 are suitable for
monitoring salt water.
SPECIFICATIONS
Accuracy
±2% full scale
Ambient Operating
-22 to +122°F
Temperature
(-30 to +50°C)
Average Response
1 second
Time
Case
Fiberglass NEMA 4X with door
window (weather resistant, water
resistant)
Pressure Recording Chart
Range
Time
No.
0-100PSI
24hr.
C010
0-150PSI
24hr.
C025
0-200PSI
24hr.
C026
0-300PSI
24hr.
C022
0-500PSI
24hr.
C028
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Model
A791
R022
A793
—
P222
—
—
4" diameter
1
⁄4 " male NPT
One "AA" alkaline battery
1.8 lbs.
6.25" x 6.0" x 2.9"
One "AA" alkaline battery, Pen,
One box of 60 charts
Price
$379.00
379.00
379.00
379.00
379.00
N/A
N/A
N/A
Catalog
No.
DK1164110
DK1164111
DK1164104
DK1164114
DK1164115
DK1164118
DK1164119
DK1164120
H
Model
PW450
PW452
PW454
PW456
PW458
PW460 (FM Approved)
PW461 (SS Sensor/FM Approved)
PW462 (SS Sensor/FM Approved)
Description
Accessory Kit
Filter Kit
Fire Hydrant Adapter Kit
Box of 60 replacement charts
Replacement Pen Pack (6 red)
Pressure
Range
0-100PSI
0-150PSI
0-200PSI
0-300PSI
0-500PSI
0-300PSI
0-300PSI
0-600PSI
Recording
Time
7 day
7 day
7 day
7 day
7day
7 day
7 day
7 day
Chart
No.
C012
C035
C040
C036
C056
C036
CO36
CO43
Price
$379.00
379.00
379.00
379.00
379.00
379.00
529.00
529.00
89.00
25.00
150.00
18.00
30.00
125.00
159.00
www.davis.com
Catalog
No.
Model
DK1164101 PW451
DK1164103 PW453
DK1164105 PW455
DK1164106 PW457
DK1164107 PW459
—
N/A
—
N/A
—
N/A
Accessories
Catalog No.
DK1164117
DK116323
DK116324
See Chart No. Above
DK116212
NISTRC1
NISTRC2
Chart Size
Connection
Power Supply
Weight
Dimensions
Includes
805
Pressure Generation & Controlling Systems
NIST
it
Provides All-In-One Convenience
Pressure Generation System
Meter can be used to generate precise pressures
with gas from atmosphere to 2000 PSI also precise
generation of low pressures for various calibration
ranges.
• A pressure cylinder for storage of 2200 PSI (The cylinder has a gauge
attached for a constant display of reserve available pressure. The storage cylinder can be refilled via a quick disconnect port by using any
normal cylinder regulation system)
• A precise regulator for generating an approximate pressure setting
• A precision volume controller attached to the output of the regulator for
"fine tuning" the pressure
• A vent in the system for venting the pressure to atmosphere
• Two ports on the system (one port to attach to any pressure standard
calibrator, the other for item under test)
• Durable rugged case
• Light weight - approx. 28 lbs. (13" x 13" x 15")
The system can also be used to generate very
low pressures by using the volume adjuster as a
pressure generator. The volume adjuster will generate approximately 10 - 15 PSI by itself with
.0005 PSI resolution. Excellent for "H2O low pressure calibration". The regulator has fine enough
adjustment to aid in low pressure generation as
well.
Pressure Controlling System
To be used with an air cylinder or plant air.
Great for controlling and maintaining pressure.
H
806
• Pressure resolution control in tenths in PSI and hundredths in "H2O"
• A precise regulator for generating an approximate pressure setting
• A precise volume adjuster attached to the output of the regulator for
"fine tuning" the pressure
• A vent in the system for venting the pressure to atmosphere
• Two ports on the system (one port to attach to a pressure standard,
the other for item under test)
• Durable rugged case
• Light weight - approx. 13 lbs. (6" x 10" x 12")
Catalog No.
Model
Description
JM100101
JM100102
PGS
PCS
Pressure Generation System
Pressure Controlling System
Price
$3,950.00
2,950.00
www.davis.com
Vacuum Generator/Pressure Controller
Provides 29 Inches Hg Vacuum from your Shop Air Supply!
Ideal for hazardous areas where
conventional vacuum pumps dare
not tread
Ask about
2 Year
NIST
H
SPECIFICATIONS
Pressure Media
Pressure Input
Filtered Shop Air
120-150 psi, 4.2 S.C.F.M.,
AN-4 37° Flared Tube Fitting
Pressure Limit Monitor Gage Size: 2" diameter, Range: 0-160 psi
Vacuum Monitor Gage
Size: 2" diameter
Range: 0-30" Hg
Regulator
All Aluminum Design
Case
Steel
Pressure/Vacuum Selector
Brass
Fittings
Brass, Quick Disconnect, 1⁄4"
Internal Tubing
250 psi rated tubing
Size/Weight
5.6" x 8.1" x 6" HWD/6.6 lbs.
Save 50%
on 2nd year
recalibration
Catalog No. Model
Description
EA111418
Vacuum Generator/
Pressure Controller
UVC1000
Price
$795.00
www.davis.com
This unique pressure/vacuum controller
provides up to 29 inches Hg vacuum in areas
that are off limits to vacuum pumps. The all
mechanical design allows the operator to use
existing shop air lines working with a built in
vacuum converter inside the unit. Shop air is
simply connected to the rear of the lightweight unit and the operator selects vacuum
or pressure mode of operation. The built in
pressure regulator also allows the operator to
work with the shop at lower pressure levels if
desired.
• All mechanical design
• No fumes
• No vibration
• Lightweight design
• Controls and regulates positive pressure
807

NIST - Maxtech

Transcription

Similar documents

UTR Angles and Channels

CBD-6 6.0 Cryogenic Belt Deflasher

G 2500 DH - Power Equipment Direct

Slick-Line Unit Information Pack

ultrashine drive through

FME softener brochure.pub

II - CERN Accelerator School

Stansted_High_Pressure_Homogenizer Brochure 2

RS Series Brochure

ecopure® dual stage filter