Stansted_High_Pressure_Homogenizer Brochure 2

STANSTED
SF
P
HIGH PRESSURE HOMOGENISERS
& CELL DISRUPTERS
PRESSURE CELL HOMOGENIZER - EP
PRESSURE CELL SIMPLICITY - STANSTED PERFORMANCE
BRINGING IMPROVED PERFORMANCE, VERSATILITY AND SAFETY TO SCIENTISTS
PRESSURES to 4,200 bar
60,000 psi
SIMPLE TO USE
SMALL SAMPLE SIZE
STERILIZABLE CELL & VALVE
TEMPERATURE CONTROL
REPRODUCIBLE RESULTS
MICROPROCESSOR CONTROLLED
REVERSE FLOW PG AND IC
HOMOGENIZATION OPTIONS
Pressure Cell instruments for cell rupture and
homogenisation have been a long
established and much loved instrument
technology for researchers; now comes a
system which takes the simplicity and ease of
use of these systems and incorporates this
into a new higher performance, safety
interlocked system; keeping the best
features of the old and combining this with
Stansted’s 39 years of experience in high
pressure cell rupture and homogenization to
provide an improved system for multidisciplinary appications.
Full pressure range flexibility 0-60000 psi
European CE and other international safety
standards compliant construction.
9ml
60,000 psi cell (4200 bar)
16ml 30,000 psi cell (2100 bar)
32ml 15,000 psi cell (1050 bar)
Scale up and large capacity through SFP’s
extensive range of high pressure cell
disputers and homogenizers
CELL RUPTURE
(E.coli. , Yeast, Staph.a., Mammalian..etc.)
NANO PARTICLES
NANO EMULSIONS
SOLID LIPID NANO PARTICLES
LIPSOMES
MICRO EMULSIONS
DISPERSIONS
SUSPENSIONS
Type 1Cell
60,000 psi cell, flow rates up to 60ml min-1
9ml
Type 2 Cell
-1
16ml 30,000 psi cell, flow rates up to 115ml min
Type 3 Cell
C
-1
32ml 15,000 psi cell, flow rates up to 230ml min
Standard Disrupting / Homogenising Valve
Type 1
High shear
Model HPVS-1
Included in standard system. Alternatives subject to application
Standard Features
—
—
—
—
B
Full Range Pressure Adjustment
A
Variable flow rate including facility to
drop by drop processing
Single shot and automatic (semi
continuous mode cycling modes)
Interchangeable configurations
Dimensions & Weight
(basic configuration)
A= 525mm (20.7”)
B= 525mm (20.7”)
C= 670mm (26.5”)
Weight 110 kg
(242 lb)
Services is offered for either
230V 1ph 50Hz
110V 1ph 60Hz
REVERSE FLOW PISTON
GAP SYSTEM
INTERACTION CHAMBER
IMPINGING JET SYSTEM
Custom configurations,
refurbishable, inspectable
Equivalent performance to
Microfluidizer® performance
(adaptations for alternative voltages, ie 220V
1ph 60Hz offered)
The Stansted range
extends to pilot and
Optional Features
production models for
large scale applications,
— Air Cooled outlet cooler (suits small volume
allowing Stansted to offer
applications) AC-HX
a full and comprehensive
— Liquid cooled outlet cooler (suits larger volume
service from basic
applications requires cooling /heating fluid
research to production for
circulation supply) LC-HX
a wide range of instudries
— Cell body heat exchanger ( requires cooling /heating from Biotech, Cometics,
fluid circulation supply, not available for ultra low
Pharmaceutical,
Chemicals, Nano
volume) CB-HX
materials .....etc.
— Pressurised product feed systems, (0.1 to 5 litre
transparent feed chamber) PFS
—
Back Pressure (2nd stage) valve (allows a two stage
pressure processing, not available for ultra low
volume chamber, also used for controlled very low
pressure work.) BPM
STANSTED F LUID P OWER LTD.
ESSEX
UK
TEL + 44 1279 813 459
FAX + 44 1279 815 180
EMAIL [email protected]
WEB S ITE http://www.sfp.uk.com
Stansted Fluid Power Limited reserves the right to improve or otherwise alter any information supplied in this document or any other documentation
supplied hereafter in the interest of product improvement. V1.0 09-11-2013. Microfluidizer® trade mark of Microfluidics Corporation