docMembrane Inflator Multi QUBE Inflator Tyre Pressure Gauges Tyre
download 
Report Transcription
Membrane Inflator Multi QUBE Inflator Tyre Pressure Gauges Tyre
Tyre Inflation Equipment Tyre Inflation Equipment MK3 Tyre Inflator Tyre Inflation Equipment AirForce Tyre Inflator Tyre Inflation Equipment QUBE 0.1 bar / 2 psi / 10 kPa 16 bar / 232 psi / 1,600 kPa 0.1 bar / 2 psi / 10 kPa 15 bar / 218 psi / 1,500 kPa +/- 0.5 % of full scale reading 0.1 bar / 1 psi / 5 kPa 9.6 bar / 138 psi / 940 kPa 500 l/min @ 13 bar supply 12 bar / 170 psi / 1,200 kPa 910 l/min @ 13 bar supply 15 bar / 217 psi / 1,500 kPa 10 bar / 145 psi / 1,000 kPa The popular MK3 Tyre Inflator is PCL’s classic handheld, slimline designed gauge. Cast aluminium body for use on the garage forecourt and high volume tyre fitting bay. •Magnified linear scale •Cast aluminium body with impact absorbing rubber bumper •Slimline design •Calibrated to 0 –138 psi and 0 – 9.6 bar •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 ALG4 Truck Tyre Inflator 0.1 bar / 2 psi 16 bar / 232 psi 12 bar / 174 psi 500 l/min @ 13 bar supply Building on the world-leading MK3, the ALG4 is a high pressure tyre inflator designed especially for truck tyre inflation. The ALG4 can inflate up to 174 psi (12 bar) and is reliable and versatile with its aluminium die cast body and linear gauge. •Magnified linear scale •Cast aluminium body with impact absorbing bumper •Calibrated to 0-174 psi and 0-12 bar •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 PCL’s range of handheld inflation has been increased with the development of the AirForce. This robust, lightweight, handheld mechanical tyre inflator offers fast, trouble-free tyre inflation for tyreshops, garages, car dealers and transport depots. •Clear dial display •Direct valve design increases inflation and deflation rates •Modern, lightweight and shock resistant construction •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 ACCURA1 Tyre Inflator 0.01 bar / 0.2 psi / 1 kPa 15 bar / 218 psi / 1,500 kPa 12 bar / 174 psi / 1,200 kPa 910 l/min @ 13 bar supply The ACCURA 1 is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software it offers fast, accurate and trouble-free tyre inflation and deflation. •Robust electronic design •Ceramic sensor •Clear and easy to read digital display •Modern, lightweight and shock resistant construction •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 2,500 l/min @ 10 bar supply Cost-effective and accurate tyre inflation is boxed off with this space-saving, entry-level, electronic preset tyre inflator. This versatile inflator is ideal for indoor use, particularly in commercial environments where ease of use, speed and accuracy are key. •Touch screen technology •3 modes in one inflator Mode 1 – Standard inflate/deflate Mode 2 – Tyreshop mode with overpressure Mode 3 – N2 fill and air to N2 conversion •Fast inflation with guaranteed accuracy up to +/- 0.5 % of full scale reading •Complies with EC Directive 86/217/EEC Tyre Inflation Equipment Forecourt Self Contained Models +/- 0.5 % of full scale reading 0.1 bar / 1 psi / 5 kPa 16 bar / 232 psi / 1,600 kPa 10 bar / 145 psi / 1,000 kPa 400 l/min @ 10 bar supply The stainless steel casing is designed to meet the exacting and testing demands of a modern petrol forecourt. Modern and stylish appearance and able to house standalone compressors. •Auto-start inflation •Default to safe setting •Easy to operate •Quick and easy installation •Air and water options •Integral hose reels and recoil hose options •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 Tyreshop Models +/- 0.5 % of full scale reading 0.1 bar / 1 psi / 5 kPa 16 bar / 232 psi / 1,600 kPa 10 bar / 145 psi / 1,000 kPa 2,500 l/min @ 10 bar supply Combining advanced and user friendly design, touch screen technology, leading senor technology, upgraded modern electronics and proprietary software – the Tyreshop Model enables operators to provide leading tyre inflation services cost effectively. These models are suitable for all professional tyre applications including commercial and retail tyreshops, mobile tyre fleets, automotive OEM’s, garages and car dealers, as well as transport depots. •Bead seat over pressure facility (OPS) •Nitrogen (N2) purge facility •Auto-start inflation •Multi-tyre variant inflates up to 4 tyres at once •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 Analogue Models 0.1 bar / 1 psi / 5 kPa 16 bar / 232 psi / 1,600 kPa 10 bar / 145 psi / 1,000 kPa 400 l/min @ 10 bar supply The Analogue Unit represents all the benefits of digital technology but with the attributes of a traditional analogue display. •Auto-start inflation •Default to safe setting •Aluminium die-cast housing •Robust electronics provide high accuracy •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 Mechanical Units +/- 0.5 % of full scale reading +/- 0.5 % of full scale reading 0.1 bar / 1 psi / 5 kPa 16 bar / 232 psi / 1,600 kPa 10 bar / 145 psi / 1,000 kPa 400 l/min @ 10 bar supply Suitable for petrol filling stations. This exciting and innovative range incorporates an electronic modular design to allow PCL to offer a “menu driven” range of highly accurate forecourt tyre inflators. •Auto start inflation •Default to safe setting •Aluminium die-cast housing •Audible and visual end of cycle signal •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 Nitrogen Inflation Equipment Tyre Pressure Gauges +/- 0.5 % of full scale reading 16 bar / 232 psi / 1,600 kPa Forecourt Models Tyre Care 0.1 bar / 2 psi / 20 kPa 10 bar / 145 psi / 1,000 kPa Mechanical Units were the original inflators designed and manufactured by PCL. •Clear impact-resistant toughened glass dial cover •Durable aluminium outer casing •Wall or pedestal mounted options •Complies with EC Directive 86/217/EEC & BS EN 12645:1999 •Incorporates a self-adjusting friction device which enables the pressure to be read of the valve •Easy to use and read •Gauges suitable for all cars and commercial vehicles •Complies with BS EN 12645:1999 Tyre Tread Depth Gauge •Accurate measurement of tread 1 – 26 mm in 1 mm increments (1.6 mm mark) •Easy to read •Department of Transport accepted for MoT testing •VOSA approved Tyre Tread Depth Gauge •Complies with EC Directive 89/459/EEC Digital Tyre Pressure & Tread Depth Gauge •Illegal tyre tread depth warning – display will flash if the reading is 1.6 mm or less •Auto power off •Self-calibrating •Stylish blue light is ideal for working in the dark Test Tank 0.1 bar / 1 psi 16 bar / 232 psi 10 bar / 145 psi PCL’s vast experience in designing and manufacturing tyre inflation equipment extends to provide this range of portable calibration testing equipment. •4 litre air receiver, manufactured in accordance with 87/404/EEC •Supplied with calibration certificate •Lightweight and easily portable •Checks most types of hand-held tyre inflation equipment up to a maximum recordable pressure of 145 psi (10 bar) Membrane Inflator Nitrogen Inflation Equipment Legend Max Torque Free Speed Weight Ave Air Consumption Vibration Inlet Thread Reading Accuracy Max Inlet Pressure Max Flow Rate Accuracy Standard Inflator 0.1 bar / 1 psi / 5 kPa +/- 0.5% of full scale reading 0.1 bar / 1 psi / 5 kPa +/- 0.5% of full scale reading 13.8 bar / 200 psi / 1000 kPa 12 bar /174 psi / 870k Pa 10 bar / 145 psi / 725 kPa 8 bar / 116 psi / 580 kPa 12 cfm /340 l/m 6 cfm / 170 l/m •Using the latest in hollow fibre membrane technology, nitrogen is generated from any standard airline supply. •High quality pre-filtration to optimise the inlet air quality, ensuring long membrane life. •Nitrogen fill and Air to Nitrogen conversion - allowing existing tyres or new tyres to be converted to nitrogen •Simultaneous/Multiple tyre inflation - up to 6 tyres at once •High Nitrogen purity delivery (97 to 99%) Multi QUBE Inflator •Using the latest in PSA technology, nitrogen is generated from any standard airline supply. •Simultaneous/Multiple tyre inflation - up to 6 tyres at once •High quality pre-filtration to optimise the inlet air quality. •Nitrogen fill and Air to Nitrogen conversion - allowing existing tyres or new tyres to be converted to nitrogen •High Nitrogen purity delivery (97 to 99%), with internal receiver tank (EC Approved) Max Inflation Pressure Standard Generator 0.1 bar / 1 psi / 5 kPa +/- 0.5% of full scale reading 0.1 bar / 1 psi / 5 kPa +/- 0.5% of full scale reading 13.8 bar / 200 psi / 1000 kPa 11 bar / 162 psi / 810 kPa 10 bar / 145 psi / 725 kPa 6 cfm / 170 l/m 13.8 cfm /380 l/m •Control & Calibrated Accuracy where it matters most! •Individual tyre pressure monitoring and control •Nitrogen inflation with accuracy & precision for high flow applications and faster inflation •Using the latest in PSA technology, nitrogen is generated from any standard airline supply. •High quality pre-filtration to optimise the inlet air quality. •Nitrogen fill and Air to Nitrogen conversion - allowing existing tyres or new tyres to be converted to nitrogen •Simultaneous/Multiple tyre inflation - up to 4 tyres at once •High Nitrogen purity delivery (97 to 99%) •Nitrogen generation using the latest in PSA technology •Nitrogen is generated from any standard airline supply (no need to keep or store expensive nitrogen bottles) •High quality pre-filtration to optimise the inlet air quality •Quick & easy installation with no moving parts and almost no maintenance - ready to operate once the airline and power is connected. •High Nitrogen purity delivery (97 to 99%), with internal receiver tank (EC Approved) Pneumatic Components Limited Holbrook Rise Holbrook Industrial Estate Sheffield S20 3GE T +44 (0)114 248 2712 F +44 (0)114 247 8342 [email protected] www.pclairtechnology.com Air Tools APP101 3/8” Impact Wrench 271 Nm 10,000 RPM 2.7 cfm 3.09 m/s2 1.28 kg ThesmallestinPCL’srangeofPrestigeImpact Wrenches.The3/8”ImpactWrenchisdesigned forprofessionalheavydutyuse,withan ergonomicallydesignedsoftgriphandleanda lightweightyethighlydurablemagnesiumbody. •Swivelrearexhaust •Lightweight •Vibrationdampeningmagnesiumconstruction •Twinhammerimpactmechanism APP201 1/2” Impact Wrench 433 Nm 10,000 RPM 2.7 cfm 2.01 m/s2 1.29 kg PCL’sPrestige1/2”ImpactWrenchutilisesa compact,lightweightmagnesiumbodyidealfor tightspaces.Thistoolprovidestheuserwithan excellentpowertoweightratiodesignedforfast andefficientfastenerworkwithminimumeffort. •Ergonomicdesignforcomfort •Lightweight •Vibrationdampeningmagnesiumconstruction •Twinhammerimpactmechanism APP203 1/2” Impact Wrench (Composite) 928 Nm 8,500 RPM 4.7 cfm 4.42 m/s2 1.94 kg Thislightweightcompositebody1/2”Impact Wrenchoffersthelatestlownoiseandlow vibrationtooltechnology,whilstmaintaininga verypowerful928Nmoftorqueandlowaverage airconsumption.Thisisatoolforprofessional highvolumeapplications. •Hightorqueoutput •Lightweightcompositebodyconstruction •Reducedvibration •Twinhammerimpactmechanism Air Tools Air Tools Air Tools Couplings & Adaptors Couplings & Adaptors Füllstandsmessgeräte Workshop Accessories Hose Reels APP234 3/4” Impact Wrench APP700SET Die Grinder APP760 Palm Sander Airflow/ Vertex Couplings XF Range Air Treatment Hose & Hose Assemblies 1,490 Nm 5,500 RPM 7.2 cfm 3.24 m/s2 6 kg APP270 1” Impact Wrench 4,500 RPM 7.9 cfm 6.88 m/s2 6.3 kg 2.6 cfm 1.13 m/s2 1.26 kg APP600 Air Body Saw PCL’sPrestigeRatchetfeaturesasoftgriphandle andacompact,robustoperatingleverwith adjustableexhaust.Thistoolalsooffersafastrun downspeedandeasyspeedcontrol,providing theuserwitheverythingtheywouldwantfroma highperformanceRatchet. •Fastrundownspeed •Lightweight •Maximumtorque95Nm •Easyspeedcontrol 1.56 kg 2.5 cfm 0.65 kg 0.96cfm 1.73 kg 0.8 m/s2 Withahighqualitycompositeconstruction, completewithspeedregulatorandnonslipgrip, thishighperformanceCutOffToolalsofeaturesa doublebearingspindle,rearswivelexhaust andspeedregulator–givingtheuserultimate control. •3”(75mm)discsize •Swivelrearexhaust •Doublebearingspindle •Speedregulator 2.73 cfm 4.84 m/s2 PCL’sPrestigeAirHammerfeaturesaunique balanceddesigngivingtheusergreatfeeland excellentperformance.Thequickchangeretainer andswivelinletallowsoptimumairflow.Comes completeinahardenedplasticcarrycasewitha rangeofchisels. •2,900blowsperminute •Reducedvibration •Swivelinlet •Uniquebalanceddesign •Quickchangeretainer APP405 Reversible Drill 1,800 RPM APP708 Cut Off Tool 0.8 kg Featuringabuiltinspeedregulatorforoptimised control,acentralvacuumtypeandlownoise outputfortheseriousprofessional.Thissander hasasuperlightweightandsoftfeel–idealfor frequentuse. •6”(150mm)padsize •12,000RPMrandomorbitforswirlfreefinishes •Reducedvibration •Builtinregulatorforoptimisedpowercontrol •Centralvacuumtype APP500SET Air Hammer ThisverylightAirBodySawweighinginataround 0.65kgisperfectfortheregularuserlookingfor aprofessionalbodysaw.Featuresincludelow vibration,highcuttingcapacityandadjustable rearexhaustforprecisioncuttingundermaximum control. •1.2mmcuttingcapacity •10mmstrokelength •Lowvibration •Lightweight •Adjustablerearexhaust 21,000 RPM 12,000 RPM 2.86 m/s2 1.59 m/s2 APP310 3/8” Ratchet 160 RPM 4 cfm FeaturingalltheattributesofPCL’sPrestigerange ofAirTools,includingreducedvibrationand nonslipgrip.ThisDieGrinderalsoincorporatesa swivelrearexhaust,speedregulatorandasafety lever.Comescompletewithhardenedplasticcase andaselectionofaccessories. •6mmcollet •Swivelrearexhaust •Doublebearingspindle •Speedregulator 10,000 RPM Thisspecialistheavydutytoolofferstheusera powerful2,169Nmoftorquewithanunbelievably lowaverageairconsumptionof7.9cfm.Thetool hasattributesofdurablemagnesiumconstruction andreducedvibration,thistoolalsoweighsinat averylight6.3kg. •Verylight1"ImpactWrench •Doublehandleforexcellentbalance •Vibrationdampeningmagnesiumconstruction •Twinhammerimpactmechanism 95 Nm 0.55 kg 3.15 m/s2 BuildingonPCL’sleadingPrestigerangeof AirTools,this3/4”ImpactWrenchprovidesthe professionaluserwithalightweight,lowvibration yethighpoweredproduct.Idealforfastener workwhereahighleveloftorqueisrequired. •Centrehandleforecxellentbalance •Lightweight •Vibrationdampeningmagnesiumconstruction •Twinhammerimpactmechanism 2,169 Nm 20,000 RPM 1.16 kg 4.29 cfm 0.9 m/s2 14 bar / 200 psi 43 cfm @ 100 psi •Airflow–singleactiondesignedforfixed applications •Vertex–doubleactiondesignedfortrailinghose applications •Robustandhardwearing •Corrosiveresistantfinish •Male,Femaleandintegralhosetailpieces availableinpopularsizes Standard Adaptors •Suitableformostworkshopcompressedair applications •BenchmarkintheUKforqualityandreliability •Hardenedsteelconstructionwithcorrosive resistantfinish •ForusewithAirflow,VertexandSafeflow Couplings 35 bar / 500 psi •Hardenedsteelconstructionwithcorrosive resistantfinish •Steelshoulderhelpspreventaccidental disconnection •Enhancestoolefficiency •Interchangeablewith: Rectus25/26,Legris25/26,Cejn320,Norgren 234/238andSchraderInterCheck35 Euro Range 14 bar / 200 psi 43 cfm @ 100 psi TakingPCL’sindustry-provencouplingstothenext level;Safeflowoffersatwo-stageself-venting release–totallyeliminatingthedangersofhose whip. •Two-stageself-ventingrelease •ConformstosafetystandardsISO 4414:1998& EN 983:1996 12 bar / 16 bar •CompleterangeofFilters,Regulatorsand Lubricators •Availableascombinationunits •10micronfilters •Selectablemanual/semi-automaticdrains Rp 1/4 @ 6 bar: 650 l/min @ 0.5 bar p.d. •Robustslimlineconstruction •Singleactionconnection •Steelconstructionwithcorrosiveresistantfinish •Interchangeablewith: Rectus14,Rectus22,ARO210,SchraderEuro, Cejn300andJWL522/532 •Comprehensiverangeofplasticandalloy construction •Pistolandpalmgripsavailable •Interchangeableconical,safetyandextension nozzles Sprayguns Rp 1/4 ISO B12 Range 35 bar / 500 psi @ 6 bar: 1,100 l/min @ 0.5 bar p.d. •Offersenhancedtoolefficiency •Steelconstructionwithcorrosiveresistantfinish •Steelshoulderhelpspreventaccidental disconnection •Offersexcellentflowcharacteristics •Interchangeablewith: Rectus23/24,Cejn310,NorgrenDynaquipDC3, Hanson3000,US-MIL-C41091/4”,Norgren237 andLegris24 21 bar / 300 psi •Suppliedinpopularpre-cutlengths •Availablewithavarietyendfittings Heavy Duty Hose Reels 17 bar / 250 psi Blowguns Safeflow Safety Coupling 14 bar / 200 psi Rp 1/4 and Rp 1/2 @ 6 bar: 2,200 l/min @ 0.5 bar p.d. DRIVEN BY AIR. •Utilisesthelatestdesigninplasticthreads •Servicepinlockingportfortotalsafetyduringall servicework •Largediameterinletandtensionsideplates •Fullflowdesignallowsproductdeliverywithno flowrestrictions •ChoiceofhoselengthsandhoseIDs PRODUCTS 2012/2013 Hose Fittings •Widevarietyofhosefittingsavailable •ComprehensiverangeofBSPfittings •RangeofNPTconvertors •Suctionandgravitymodelsavailable •HVLPgunsutiliseprecisionengineeredbrass aircapwithstainlesssteelsnozzleandneedle– providingapremiumqualitypaintfinish •1.4,1.5and1.7mmfluidnozzlesavailable FromthePrestigerangeofhighendtools, thisproductfeaturesamagnesiumbody, incorporatingalightweightfeelandhighpower output. •3/8”(10mm)Jacobskeylesschuck •Fingerswitchdirectionchange •Tripleplanetarygearsystem •Idealfordrilling,reamingandhoning www.pclairtechnology.com
