R116-180 - Vogelsang

R116-180
The R Series pump line is a very economical and versatile
pump originally designed for agricultural use. Its robust
construction and small footprint is perfect for mobile
applications such as filling and emptying tankers and
transferring slurry between pits. The economical R116
series offers a high-performance, cost-effective pumping
solution for viscous liquids containing solids.
HIFLO POSITIVE DISPLACEMENT ROTARY LOBE PUMPS
Run Dry Without Damage: Vogelsang pumps are warranted
against damage from run dry for a period up to 30 minutes
Self Priming to 25’ (Wet): With suction lifts to 25’, Vogelsang
pumps excel at the toughest suction lift applications
Compact Size Reduces Expense: Small footprints equate to
reduced construction and fabrication expense.
Unlimited Drive Options: V-Belt drives, Geared Motors with
reducers, Close coupled hydraulic motors, air or submersible,
Power Take Off. Vogelsang pumps offer unlimited drive
options.
High Solids Handling: Our original lobe design handles
tough applications where large solids are present in the
liquid. The two-wing design allows our pumps the largest
cavity between the lobe and housing which is why it can
handle such large solids.
MECHANICAL SPECIFICATIONS - STANDARD & OPTIONAL
Materials:
Mechanical Specifications:
Bearing Housing: Gray cast iron, 230-260 Brinell hardness
Connections: Suction, 6”; Discharge, 6”
Front Cover: Gray cast iron, 230-260 Brinell hardness
Weight: 209lbs.
Front Wear Plate: Hardox, 550 Brinell hardness
Rotor Options: Straight 2-wing Lobes
Pump Shaft: Carbon steel, ASTM A470
Mounting Options: Inline, piggy-back, PTO frame
Shaft Sleeve: Stellite coated stainless steel.
Drive Options: Inline Gear Motor, V-belt, Hydraulic, PTO
Rear Wear Plate: Hardox, 550 Brinell hardness
Warranty, Testing & Quality Assurance:
Housing Segments: Gray cast iron, 230-260 Brinell hardness
Warranty: 1 year, manufacturer’s defects.
Mechanical Seal: Component Seal, Duronite vs. Duronite
Testing: Each pump is factory tested at the customers
specified duty point at a suitable range of flow and pressure conditions in accordance with Hydraulic Institute
Standards.
Rotor Core: Gray cast iron
Rotor Covering: NBR, SBR, EPDM, Viton, Werobust.
ISO 9001:2000 Certification: Vogelsang is a fully certified for the manufacture and repair of industrial pumping
equipment.
Sludge Pumping, Macerating & Distributing Products
800.984.9400
www.vogelsangusa.com
©Vogelsang USA, Inc. All Rights Reserved.
starting torque: 1616 in lb
not allowed for continuous operation
800
V'th= 0.92 GPR
700
25 psi
R116-180
capacity [GPM]
PERFORMANCE SPECIFICATIONS
Series & Model
R116-180
Capacity
gpm m3/h
594
135
50 psi
70 psi
600
500
400
Displacement
300l/100rev
gal/100 rev
91.9
348
Max Pressure
psi bar
72.5 5
Max Speed
rpm 1/min
650
200
PERFORMANCE CURVES
Characteristic Curve
100
R116 - 180
lobe quality: NBR-HiFlo
starting torque: 1616 in lb
0
max. operating pressure:
70 psi
not allowed for continuous operation
0
800
200
300
400
500
speed [RPM]
600
700
40
25 psi
power [hp]
700
50 psi
70 psi
1)
600
500
800
900
70 psi
35
V'th= 0.92 GPR
capacity [GPM]
100
30
50 psi
25
20
25 psi
15
10
5
0
0
400
300
100
200
300
400
500
speed [RPM]
600
700
800
900
Values based upon water 70°F
required driving power at the pump shaft
1)
200
100
0
0
100
200
300
400
500
speed [RPM]
600
700
40
power [hp]
900
70 psi
35
DIMENSIONAL
DRAWING
30
1)
800
50 psi
25
20
25 psi
15
10
5
0
0
100
200
300
400
500
speed [RPM]
600
700
800
900
Values based upon water 70°F
required driving power at the pump shaft
1)
Sludge Pumping, Macerating & Distributing Products
800.984.9400
www.vogelsangusa.com
©Vogelsang USA, Inc. All Rights Reserved.