E0711 Transfer Pump 12

Pumps
E0711
12-Volt
“FatBoy” Pumps
MaximumFlow
Part No.
Control
PSI
@ 60 PSI
Wt.
Demand
Bypass
12-Volt
Fatboy Diaphragm Pumps feature
self-priming design with priming
capacity to 14’. Available in either
Demand or Bypass styles. Nylon
housing with Viton® valves and
Santoprene diaphragms for
added chemical compatibility.
7 GPM at 10 PSI; 5 GPM at 60
PSI. Motors are 12VDC, totally
enclosed, non-vented. Maximum
temperatures to 140° F. Lead wires
are 14AWG,12” long. Ports are 1/2” FPT.
17 Amps draw at 60 PSI (water)
13 Amps draw at 40 PSI (water)
D
AQ 770
AQ 771
Transfer Pump
60
70
5 GPM
5 GPM
8 lbs.
8 lbs.
Net Ea.
Pony Transfer Pumps are
lightweight, non-submersible
and portable. Can be used for
transfer and dewatering at low
pressure (10 PSI). Rated for
intermittent duty (15 minutes on,
45 minutes off). Self-priming up to
6’. Plated brass bodies. Dual ports
with 3/4” male garden hose x 3/8” FPT.
1/10 H.P. 12-Volt units come with
6” lead wires. 110-volt comes with
5’ power cord.
D
UL
12-Volt Aqua Tiger Pumps
FEATURES:
•12-Volt DC Centrifugal Pumps
•3/4" Ports/Viton® Seal
•Low Flow/Pressure
5 GPM @ 9 PSI
Maximum Flow 18 GPM
•Bronze Body & Impeller or
316 Stainless Body/Impeller
•Maximum temperature is 140˚ F.
Part No.
Voltage Description
HY 9700B
12 Volt DC Bronze Centrifugal Pump
SR COMSV012D 12 Volt DC Stainless Centrifugal Pump
12V & 115V
D
Part No.
Voltage
GPM
Wt.
GJ PP1
GJ PP12
115 Volt
12 Volt
6.0
5.0
5.5 lbs.
4.2 lbs.
Net Ea.
$ 107.20
99.40
12-Volt Diaphragm Pumps
For use with a wide variety of applications
Fatboy Diaphragm Pumps feature
self-priming design with priming
capacity to 14’. Available in either
Demand or Bypass styles. Nylon
housing with Viton® valves and
Santoprene diaphragms for added
chemical compatibility. Rated to
7 GPM maximum flow. Motors
are 12VDC, totally enclosed,
non-vented. Maximum temperatures
to 140° F. Lead wires are 14AWG. 12”
long. Ports are 1/2” FPT.
Wt.
Net Ea.
5 lbs. $ 202.50
5 lbs.
264.02
12 Volt High Head Utility Pump
D
1 HP, 12 Volt motor provides high pressures for wash down
and many other applications where 120 Volt power is
not available. Available in either investment cast
iron or stainless housing. Stainless
enclosed impellers & shaft are standard.
Discharge rotates in 90° increments;
includes 4 drain plugs. Rated to
180° F. with buna seal; 200° F. with
viton seal. 5 GPM at 33 PSI, 25 GPM
at 26 PSI, 50 GPM at 10 PSI. 1 1/4” x
1” FPT ports. Straight centrifugal (not
D
self-priming). 1 Hour Duty Rating: 83
amps maximum.
Mech. Seal
Buna N
Viton®
$ 140.70
Pony Pumps
M40
* Flow rate is based on 10' discharge height.
Housing
Cast Iron
Stainless
Net Ea.
GJ 350M 115-Volt Transfer Pump
Part No.
Voltage * Flow Rate Wt
Net Ea.
SR M40 Utility Pump
115 Volt
4 GPM
6 lbs. $ 89.95
SR A252 Impeller kit for M40 pump....................................... 15.30
Part No.
GR 489G-95
GR 489G-98
Features Include: Nylon
pumping head with Ryton
impeller • Carbon/Ceramic seal
• Buna O-Ring • Ports are 3/8" hose
barb • 1/8" Bypass port • Rated to 115-volt • 1/10 H.P. • 24" lead wires
(does not include switch) • Dimensions: 4" Width, 7" Length, 3" Height
• Weight is 2.7 lbs.
Part No.
Model M40 is UL listed and features
a 115 volt motor with thermal overload
protection and grounded 6' power cord
with plug. Rated to 4 GPM @ 10'
discharge height.
D
D
Ideal for mild chemical transfer and
carpet cleaning applications.
Non-submersible design is
not self-priming and requires
a flooded suction. Rated to a
maximum of 2.85 GPM and
up to 35 PSI.
$ 256.00
256.00
Utility Pumps
Light-Duty, Economical Utility
Pumps for a wide variety of transfer
requirements. Features non-corrosive
pump end with stainless steel wear
plates. Inlet and outlet ports are 3/4"
MGHT.
Model 350M
Part No.
GPM
Ports
Control
Net Ea.
AQ 550
5.0
1/2" FPT
Demand $ 126.50
AQ 550-HB
5.0 1/2” Quick Tach *Demand 126.50
AQ 551
5.0
1/2” FPT
Bypass
128.00
AQ FQ5S-12 1/2” Straight QT Hose Barb Fitting....
4.18
* Model 550HB requires use of QuT hose barb connectors.
Wt
57 lbs.
57 lbs.
Net Ea.
$ 841.00
1037.00
Viton® is a registered trademark of DuPont Performance Elastomers
DULTMEIER SALES • OMAHA, NE
(800) 228-9666
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0711