SJ Top Load Spec Sheet 10/99
SJ TOP LOAD ACCESSORIES & ADD ONS
AUTOMATIC PARTS WASHERS
TOP LOAD WITH WATER-PROPELLED SPRAY BAR
Automatic Water Fill: Maintains water level in tank for
Temperature Gauge: For
monitoring temperature of
Caster Wheels: For convenience in moving parts washer around the shop.
Small Parts Basket:
With lids for holding nuts,
bolts and other small parts.
Pressure Gauge: For monitoring pump and filtration system
Service Tray, Tool Basket with
Tools: For convenience in handling basket and hand scrubbing
parts. Parts #21-170 / 21-175
Porta Kleen: For processing
wastewater from parts washer.
(shown with wet vac and barrel)
Hand Detail Scrub Brush:
For hand scrubbing hard-toclean parts.
Panel mounted for adjusting
temperature up to 190°F.
Automatic Oil Skimmer:
Removes surface oil to keep
cleaning solution viable.
SJ TOP LOAD SPECIFICATIONS
250 lbs (113 kg)
350 lbs (159 kg)
15" (38 cm)
18" (46 cm)
BASKET DIMENSIONS 26” x 15” x 7” (66 cm x 38 cm x 18 cm)
Hour Meter (shown above):
Monitors operation of unit for
32” x 21” x 7” (81 cm x 53 cm x 18 cm)
64 gallons (242 liters)
80 gallons (303 liters)
1.5 hp Centrifugal
20 gpm, 40 psi* (76 lpm, 2.8 bar)
2 hp Centrifugal
35 gpm, 45 psi† (132 lpm, 3.3 bar)
4.5 KW Incoloy
6 KW Incoloy
230V 1 ph 27 amps, 230V 3 ph 22 amps,
460V 3 ph 20 amps
230V 1 ph 35 amps, 230V 3 ph 27 amps
460V 3 ph 25 amps
CABINET SIZE LxWxH 42" x 46" x 36" (107 cm x 116 cm x 91 cm)
Metal Tray Dividers: For
stacking flat metal pieces for
more thorough cleaning.
6KW Heater: For faster temperature rise of when quick
start up is needed.
Wastewater Drum Evaporator:
Separate 3000W heating element reduces disposal costs.
48" x 49" x 42" (122 cm x 124 cm x 107 cm)
343 lbs (156 kg)
466 lbs (211 kg)
410 lbs (186 kg)
531 lbs (241 kg)
Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. This equipment intended for indoor use only. Customer is responsible for any permits, compliance with codes, or other government requirements
associated with the installation, use, or disposal of waste associated with this equipment.
* 30 psi (2.1 bar) with optional filtration system.
† 38 psi (2.1 bar) with optional filtration system.
Pump Upgrades: 2 hp for 35
gpm, 45 psi (132 lpm, 3.3 bar).
3 hp for 50 gpm, 50 psi (189
lpm, 3.4 bar).
Shown with Porta Kleen
and Optional Accessories
1-YEAR LIMITED WARRANTY • CERTIFIED TO UL SAFETY STANDARDS • ISO-9001 COMPANY
WATER CLEANING SYSTEMS
Made in USA
CLEANING EQUIPMENT TRADE ASSOCIATION
FORM #96-0202 • 10/99 • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA
HOT AND COLD WATER
SJ TOP LOAD
Built to Last: Entire unit is made
of 12-gauge steel coated with an exterior epoxy, powder paint for years of
AUTOMATIC WASHERS FOR CLEANING PARTS AS LARGE AS A TRANSMISSION
Discover the Many Ways LANDA Parts Washers Can Save You Money with the Patented Water-Propelled Spinning Spray Bar Design
Hot Air Exhaust:
Removable baffle allows for
connecting flexible exhaust
Durable lid is easy to open
with side-mounted gas struts.
Steam Condensation Pad:
Leak-Free Lid: Interlocking
mechanical seal eliminates the need for
seals or gaskets.
Service Tray and Tools:
Optional tray for inspecting
parts and hand tools for
scrubbing burned on or
Safety Handles: High-density,
heat-resistant, plastic handles are located on both sides for convenience in
With 26 precision spray nozzles on the spray bar (22 on
SJ-10), parts are hit from
every angle and are never
more than 18 inches from
the spray nozzle.
Tri-Lingual Labels: Operating
instructions and warning labels are easy
to find and detailed in English, Spanish
Momentary Safety Switch:
Automatically turns off pump when lid
is opened to protect operator from hotwater spray.
Stops spray bar from spinning
when lid is opened to protect operator from hot-water splash.
Industrial Pump: Cast iron
head provides cleaning force of
up to 35 gpm and 45 psi (20
gpm and 40 psi on SJ-10).
Rectangular Parts Basket:
Easy-to-lift-out parts basket is more conducive to fitting automotive parts (stainless
steel option #21-150 (SJ-10), #21-152 (SJ-15).
Assembly: A carbon
Water-Propelled Spin Bar: Spin-
graphite rotary union
with long-lasting, lowmaintenance, non-corrosive
seals rotates on a hardened
stainless steel spin pin.
ning spray bar is pushed by water eliminating a need for a drive motor, electric
turntable, transmission, gears, tires, brushes, and other mechanical devices that
require additional maintenance.
Filtration System: Stainless
steel strainer filters debris and solids to
as small as 0.008 inches, extending the
life of the cleaning solution. Strainer is
easy to remove and clean for reuse.
Drain Port: 1-1/2-inch plug provides
convenient disposal of wastewater.
Suction Line Strainer: Protects
pump and nozzles from debris in the tank.
Auto Water Fill: Option for ease
of maintenance by automatically replenishing the water in the tank before
cleaning solution level drops too low.
Manual Lid Lock: To lock lid closed
when pump is operating for added operator safety.
Efficient Heating: High-efficiency
6KW calrod heating element is protected
in an incoloy sheath for longer life (4.5KW
calrod on SJ-10).
Other patents pending
Extra Large Tank: 80-gallon tank
shuts down the unit if the water drops
below normal operating level thus protecting the heating element and pump from
damage (not visible).
Reduces water loss by filtering steam in
the exhaust port.
Several optional parts baskets are
available with lids for holding bolts,
nuts or other small parts.
Low-Water Shut Off: Automatically
ized belt oil skimmer automatically
removes excess floating oils from solution tank (not visible).
Made in USA
Customized Parts Basket:
(64-gallon on SJ-10), nearly twice the capacity of comparable parts washers, keeps
water hotter and cleaner longer.
Belt Oil Skimmer: Optional motor-
Temperature Gauge: Optional
gauge for measuring water temperature.
Chip Tray Protection:
Metal chip trays, located directly
below the basket, retain heat in the
cleaning solution and prevent stray parts
and large metal shavings from falling into the
tank. Without the trays, wash water would have
to be drained to retrieve stray parts.
Pressure Gauge: Optional
gauge for measuring performance of
both the filtration system and industrial
Control Panel: Easy-to-
access electrical box has switches
and indicator lights for automatic
timers and power. There is also a
low-water indicator light.
Automatic Timers: 1-hour wash
timer allows for unattended operation
plus protects against operator neglect.
7-day programmable heater timer saves
energy by turning off heater when not
in operation for long periods.
CREATING A REVOLUTION
IN PARTS CLEANING
scrub tubs are
headed for the
scrap heap of history.
For two reasons:
■ Solvents are hazardous to employees
and the environment;
■ Scrub tubs force
skilled mechanics to
be diverted from working on repairs, to the messy
task of cleaning parts by hand.
In recent years, automatic, aqueous parts washers have come to the rescue. But they, too, have
■ They’re too expensive for low-volume usage; or
■ They can create their own maintenance headaches with gears, drive motors, and transmissions.
Now there’s a smarter way.
LANDA’s new SJ Series Aqueous Parts Washer,
with its water-propelled spray bar, offers
the labor savings of an
automatic parts washer without the maintenance headaches.
And, best of all, it
has a scrub-tub price
without the worry of
Shown with Optional Accessories