Domestic Power Supply Cords - Electri-Cord
Transcription
Domestic Power Supply Cords - Electri-Cord
Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Domestic Power Supply Cords Our Online Product Catalogs Most of the cords shown in this brochure are standard, stock items at our factory in Westfield, Pennsylvania, U.S.A. This is by no means our entire line. Optional features include different lengths, heavier wire types, rubber wire, different colors, terminals, strain reliefs, etc. Electri-cord can also supply cords for use in Israel, South Africa, Hong Kong, India, Great Britain and many other countries. Please contact our sales office for prices and for help in designing the exact cord to meet your requirements....Thank you. Table of Contents: Our Mission Statement and ISO 9002 Certificate Quality is Consistency Special Operations Power Supply Cords Two and Three Conductor Molded Male Plugs Hospital Grade and Heavy Duty Plugs Special Connectors Business Machine Connectors-International Strain Reliefs Wire Size Specifications Cross Reference Table How to Order or Inquire O.E.M. Product Specification Worksheet (PDF 391KB) Glossary of Terminology-Wire Type Metric Conversion Chart UL and CSA: Throughout this catalog, you will see constant reference made to UL and CSA. All of the power supply cords pictured, and all of our molds, where specified, are UL listed and CSA certified. All of our products will fall under one of the following file numbers: CANADIAN STANDARDS ASSOCIATION UNDERWRITERS LABORATORIES E18951 E45239 E48367 LR14017 LL24378 All of our products are labeled to meet the requirements of UL and CSA. Labeling requirements, of course, vary with the final product classification and end use: power supply cord, detachable power supply cord, wiring harness, cord set, processed wire, etc. Where bulk labeling is used, cartons should not be broken down or destroyed until at the end user's location, to avoid loss of UL and CSA identification. UL and CSA require identification of all components. We achieve this by placing our name and address (Electri-Cord, Westfield, PA) on the face of each plug or connector as it is molded. Our State of the Art Assembly Line Cutting and Terminating In-Line Molding ELECTRI-CORD Manufacturing Company 312 East Main Street Westfield, PA. 16950 Telephone: 814-367-2265 ~ Fax: 814-367-2314 Since 1946 Fail-Safe Testing Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Our Mission: Excellence is Consistent Service. At Electri-Cord, we recognize that your business depends on quality suppliers who consistently produce reliable products on time. We have structured our company accordingly because we always put you, our customer, first. We believe that every aspect of our business is incorporated in meeting one goal - quality service to our customers. With that direction we are committed to building the pride necessary to help our employees to constantly improve our processes, reduce variability, and ensure that only top quality products leave our factory. Every day, every order, every time. For us, service means innovative and problem-solving designs, custom manufacturing, courteous and accurate order entry, and prompt delivery. We have been in the cord business since 1946. Power supply cords and cord sets are our only business. Experience and product focus have earned us our reputation for excellence. But we aren't prepared to rest on our reputation. We continue to strive to meet your requirements. ELECTRI-CORD Mfg. Co. OEM Power Cords and Cord Sets Our ISO Certificate This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: Jon Quinn All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Quality is Consistency: Excellence is Consistent Service. At Electri-Cord, quality is much more than the absence of defects; it is the way we manage our business. We consider that consistency in all of our processes that go in to producing an electric cord is the route to quality and that consistancy is only achievable through the use of techniques such as statistical process control [SPC], to continuously improve our process and our product. In this way, we prevent defects from hapening in the first place. In today's competitive environment, we consider it is no longer good enough just to meet specifications - we aim to center all of our processes well within specifications. We recognize that true quality can therefore only be achieved by the continuous improvement of all stages of our process... not just manufacturing but also purchasing, administration, etc. and indeed all aspects of service to the customer. Quality is a way of managing, simply because our approach depends on teamwork between our management team and our workforce. At Electri-Cord, we believe in our workforce - they are the people that know our processes and how to improve them, and we hold structured, regular meetings to harness their knowledge. These work teams then use a "Seven Step" approach to process improvement, as shown below. We train our workforce to treat their colleagues at the next stage in the manufacturing cycle as customers, and to work with them to improve quality techniques such as SPC. Perhaps most important to our quality approach is our dependence on you, the customer. We believe you can help us improve our product even further by constant review against your needs; just as we are with our own suppliers. We extend an open invitation to all of our customers to visit us here in Westfield, PA and see how we achieve quality. achieve quality. The seven steps to process improvement Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Step 6: Identify Key Problems and Improvement Opportunities Specify Customers and Their Requirements Identify and Quantify Cause and Effect Relationships Verify Cause and Effect Relationships Optimize the Process and Confirm the Results Define Operating Requirements of the Acceptable Process Institute Control Procedures This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Special Operations: Custom Capabilities If you are looking for a cord but not sure of all specifications and dimensions you need, or you need to modify a cord shown in this catalog, give our problem-solvers a call. They will be more than glad to help you specify a cord for just your requirements. Mechanically Assembled Plugs Electri-Cord has the capabilities to assemble many varieties of mechanically-applied plugs. These include hospital grade, high amperage, and twist-lock plugs in most NEMA configurations. We can assemble the brand name you specify, or we will suggest a competitive, more readily available alternate. In-Line Switches Electri-Cord is fully equipped to assemble in-line thumb-wheel switches onto 18/2 SPT-1 and SPT-2 wire. Once assembled, the cord and switch are each fully tested for continuity, polarity, and switch operation. Switches are available in black, brown, and ivory with your choice of location on the cord. Terminals We stock over 100 terminals of all types and configurations: rings, disconnects, spades, bare, tinned, insulated, and fully insulated. We are able to supply you with the exact terminal you require, or with an equivalent we may have in stock. All terminal crimping is carefully monitored for proper security and crimp heights. Bulk Wire on Reels Although Electri-Cord does not specialize in selling bulk wire, we do make available our inventory of 20 million feet to our customers. If the wire you need is on hand, and we have enough inventory to spare, we will be able to ship in 24-72 hours. We prefer to ship stock wire on full reels, but will re-spool down to a minimum 1000 feet per spool, at a nominal cost. Custom Colors Although most of our 20 million foot inventory of wire consists of black, grey and white, we have successfully matched colors for many customers in the past. Custom colors such as blue, red, beige, and orange are always possible. There may be minimums on special colors and lead times may be affected. Please call our sales department with your special requirements. Packaging and Labeling When filling out our Product Specification Sheet (available online or in our print catalog), please tell us your full requirements. We have the capability for all of the following and more. Packaging Capabilities Bulk Packaging Self-secured Hank Fold and Tie Hank Coil and Tie Individual Bagging Labeling Capabilities P/N on Each Cord Bar Code on Each Cord Customer Name Caution Labels Custom Printing on Bag This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Power Supply Cords: Most of the cords shown in this brochure are standard, stock items at our factory in Westfield, Pennsylvania, U.S.A. This is by no means our entire line. Optional features include different lengths, heavier wire types, rubber wire, different colors, terminals, strain reliefs, etc. Electri-cord can supply cords for use in Israel, South Africa, Hong Kong, India, Great Britain and many other countries. Please contact our sales office for prices and for help in designing the exact cord to meet your requirements....Thank you. P/N and Color Length AWG Wire Type Nominal O.D. Rating Stranding ECM-106-BLACK 6' 18 SPT-1 .105 x .203 10A/125V 41/34 ECM-106-WHITE 6' 18 SPT-1 .105 x .203 10A/125V 41/34 ECM-109-BLACK 9' 18 SPT-1 .105 x .203 10A/125V 41/34 ECM-109-WHITE 9' 18 SPT-1 .105 x .203 10A/125V 41/34 Molded Plug - MC-51 NEMA 1-15P (Polarized) Free End Split 1" Strip and Twisted 5/8" Bulk Packed P/N and Color Length AWG Wire Type Nominal O.D. Rating Stranding ECM-136-BLACK 6' 18 SPT-1 .110 x .303 10A/125V 41/34 ECM-137-BLACK 6' 18 SPT-2 .140 x .335 10A/125V 41/34 Molded Plug - MC-6-3 NEMA 5-15P P/N and Color Free End Split 1 1/2" Strip and Twisted 5/8" Bulk Packed Length AWG Wire Type Color Code Nominal O.D. ECM-201-BLACK 6' 18 SVT N.A. .240 10A/125V 41/34 ECM-202-BLACK 6' 18 SJT N.A. .298 10A/125V 16/30 Molded Plug - MC-2 or MC-6 NEMA 1-15P (Non-Polarized) Free End ROJ 1 1/2" Strip and Twisted 5/8" Bulk Packed Rating Stranding P/N and Color Length AWG Wire Type Color Code Nominal O.D. ECM-237-GREY 6' 18 SVT N.A. .255 10A/125V 41/34 ECM-239-GREY 8' 18 SVT N.A. .255 10A/125V 41/34 ECM-405-GREY 6' 18 SJT N.A. .320 10A/125V 16/30 ECM-407-GREY 8' 18 SJT N.A. .320 10A/125V 16/30 Molded Plug - MC-6-3 NEMA 5-15P Free End ROJ 1 1/2" Strip and Twisted 5/8" Rating Stranding Bulk Packed Detachable Power Supply Cords: P/N and Color Length AWG Wire Type Color Code Nominal O.D. ECM-380-GREY 6' 18 SVT N.A. .255 10A/125V 41/34 ECM-250-BLACK 7'6" 18 SVT N.A. .255 10A/125V 41/34 ECM-251-BLACK 7'6" 18 SVT ICC .255 10A/125V 41/34 ECM-500-BLACK 6'7" 18 SJT ICC .320 10A/125V 16/30 ECM-501-BLACK 9'10" 18 SJT ICC .320 10A/125V 16/30 ECM-502-BLACK 6'7" 16 SJT ICC .345 13A/125V 26/30 ECM-504-BLACK 6'7" 14 SJT ICC .375 15A/125V 41/30 Molded Plug - MC-6-3 NEMA 5-15P Molded Female-BME IEC 320 C13 Bulk Packed Rating Stranding P/N and Color Length AWG Wire Type Color Code Nominal O.D. ECM-490-BLACK 6'7" 18 SVT ICC .255 10A/125V 41/34 ECM-491-BLACK 6'7" 18 SJT ICC .320 10A/125V 16/30 Molded Plug - MC-6-3 NEMA 5-15P P/N and Color Molded Female-BME-90R-175SC IEC 320 C13 Rating Stranding Bulk Packed Length AWG Wire Type Color Code Nominal O.D. ECM-742-BLACK 6'7" 18 SVT ICC .255 10A/125V 41/34 ECM-743-BLACK 9'10" 18 SVT ICC .255 10A/125V 41/34 ECM-600-BLACK 6'7" 18 SJT ICC .320 10A/125V 41/34 ECM-601-BLACK 9'10" 18 SJT ICC .320 10A/125V 41/34 Molded Plug - MC-6-3 NEMA 5-15P Molded Female-BME IEC 320 C13 Bulk Packed Rating Stranding P/N and Color Length AWG Wire Type Color Code Nominal O.D. ECM-592-BLACK 6'7" 18 SVT ICC .255 10A/125V 41/34 ECM-593-BLACK 9'10" 18 SVT ICC .255 10A/125V 41/34 ECM-524-BLACK 6'7" 18 SJT ICC .320 10A/125V 16/30 ECM-595-BLACK 9'10" 18 SJT ICC .320 10A/125V 16/30 Molded Plug - HMB IEC 320 C14 Molded Female-BME IEC 320 C13 Bulk Packed ELECTRI-CORD Manufacturing Company 312 East Main Street Westfield, PA. 16950 Telephone: 814-367-2265 ~ Fax: 814-367-2314 Since 1946 This Page Copyright © 2003Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Rating Stranding Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ 3-Conductor Molded Male Plugs: MC-6-3 Rating: 15A-125V 5-15P Exceptions: 22 AWG and 12 AWG UL only Used On: 22/3 AWM 18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO; S; SO; ST 16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO; S; SO 14/3 SPT-3; SJT; SJ; SJO 12/3 SJT; SJ; SJO MCA-3P Removable insert can be tooled with Customer's logo. Check with sales department. Rating: 15A-125V 5-15P MCA-520 5-20P Used On: 18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO 16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO 14/3 SPT-3; SJT Rating: 20A-125V MCA-3T Rating: 15A-250V 6-15P MCA-620 Rating: 20A-250V 6-20P Used On: 18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO 16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO 14/3 SPT-3; SJT 2-Conductor Molded Male Plugs: MC-2 Rating: 13A-125V 1-15P Used On: 18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO 16/2 SPT-2; HPN; SJT; SJ; SJO Suffix-P = Polarized MC-6 Rating: 13A-125V 1-15P Removable insert can be tooled with Customer's logo. Check with sales department. Used On: 18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO 16/2 SPT-2; HPN; SJT; SJ; SJO Suffix-P = Polarized MC-51 1-15P Used On: 20/2 XT; POXT Rating: 13A-125V 18/2 SPT-1; SPT-2; HPN 16/2 SPT-2; HPN Suffix-P = Polarized MC-T Rating: 13A-125V U/L Toy Plug Exceptions: 22 AWG and 12 AWG UL only 1-15P Removable insert can be tooled with Customer's logo. Check with sales department. Used On: 18/2 SPT-1; SPT-2; SVT; SV Suffix-P = Polarized Molded Plugs With Cord Grips: MC-6-3 C/G Rating: 15A-125V 5-15P Used On: 18/3 SVT; SJT; SV; SJ; SJO 16/3 SJT; SJ; SJO 14/3 SJT; SJ; SJO MC-6 C/G-A Rating: 15A-125V 1-15P Removable insert can be tooled with Customer's logo. Check with sales department. Used On: 18/2 SPT-2; SVT; SJT; SV; SJ; SJO MC-6 C/G-B Rating: 15A-125V 1-15P Used On: 18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO Removable insert can be tooled with Customer's logo. Check with sales department. Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Hospital Grade and Heavy Duty Plugs: MC-9S-XXX Available in the following configurations: NEMA 5-15P = MC-9S-515 NEMA 6-15P = MC-9S-615 NEMA 5-20P = MC-9S-520 NEMA 6-20P = MC-9S-620 5-15P 6-15P 5-20P 6-20P Used On: 18/3 SJT; SJ; SJO 16/3 SJT; SJ; SJO 14/3 SJT; SJ; SJO; SO 12/3 SJT; SJ; SJO Suffix-H = Hospital Grade with Green Dot. Ratings: See Below 15A-125V 15A-250V 20A-250V 20A-250V MC-9A-XXX-X Available in the following configurations: NEMA 5-15P = MC-9A-515 NEMA 6-15P = MC-9A-615 NEMA 5-20P = MC-9A-520 NEMA 6-20P = MC-9A-620 Ratings: See Below 15A-125V 15A-250V 20A-125V 20A-250V 5-15P 6-15P 5-20P 6-20P Used On: 18/3 SJT; SJ; SJO 16/3 SJT; SJ; SJO 14/3 SJT; SJ; SJO; SO 12/3 SJT; SJ; SJO Ground pin can be oriented in four different positions. Position shown is 12 o'clock (-12). Other positions are 3 o'clock (-3), 6 o'clock (-6) and 9 o'clock (-9). Suffix-H = Hospital Grade with Green Dot. MC-10 Available only as a NEMA 5-15P configuration. 5-15P Used On: 18/3 SJT; SJ; SJO; SVT; SV 16/3 SJT; SJ; SJO 14/3 SJT; SJ; SJO 12/3 SJT; SJ; SJO Suffix-H = Hospital Grade with Green Dot. Rating: 15A-125V Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Special Connectors: WBH-2F Rating:10A-125V WBH-2M Rating:10A-125V Used On: 18 AWG only Used On: 18 AWG only WBH-3F Rating:10A-125V WBH-3M Rating:10A-125V 250-TV DISCONTINUED Used On: 18 AWG only Used On: 18 AWG only Used On: 18/2 SPT-1; SPT-2 16/2 SPT-2 Suffix-P = Polarized 260-TV Rating:7A-125V 265-TV Rating:7A-125V 300-TV Rating:7A-125V Used On: 18/2 SPT-1; SPT-2 16/2 SPT-2; HPN Suffix-P = Polarized Used On: 18/2 SPT-1; SPT-2 16/2 SPT-2; HPN Suffix-P = Polarized Note: This plug mates with our MC-C. Used On: 20/2 XT; POXT 18/2 SPT-1; SPT-2 Suffix-P = Polarized Approvals only for 18AWG 350-TV Rating:7A-125V Removable insert can be tooled with Customer's logo. Check with sales department. Used On: 20/2 XT; POXT 18/2 SPT-1; SPT-2 Suffix-P = Polarized Approvals only for 18AWG MC-C Rating:7A-125V Note: This plug mates with our 300-TV. Used On: 20/2 XT; POXT 18/2 SPT-1; SPT-2 *20 AWG UL only Suffix-P = Polarized BMC-1 Rating:7A-125V BMC-2 Rating:7A-125V BMC-3 Rating:7A-125V Used On: 18/3 SPT-2; SVT Used On: 18/3 SPT-1; SPT-2; SVT; SJT Used On: 18/2 SPT-1; SPT-2; SVT; SJT BMC-4 Rating:7A-125V MFC-7 Rating:7A-125V Used On: 18/3 SVT; SJT Used On: 18/2 SPT-1; SPT-2 HMB Rating:15A-125V/250V Note: This plug mates with all of the International Business Machine Plugs on our Business Machine Connectors Page. Used On: 18/3 SVT; SJT 16/3 SJT 14/3 SJT *Also approved on 18AWG and 16AWG Shielded Wire. MCF-3 DISCONTINUED 5-15R Used On: 18/3 SPT-1; SPT-2; HPN; SVT; SJT 16/3 SPT-2; HPN; SJT 14/3 SPT-3; SJT Removable insert can be tooled with customer's logo. Check with sales department. MFX-3 Rating:15A-125V 5-15R Exceptions: CSA approval only on SJT. Removable insert can be tooled with customer's logo. Check with sales department. Used On: 18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SJT; SJ; SJO 16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO 14/3 SPT-3; SJT; SJO 12/3 SJT; (Non-U/L) MCF-2 DISCONTINUED 1-15R Removable insert can be tooled with customer's logo. Check with sales department. Used On: 18/2 SPT-1; SPT-2; HPN; SVT; SJT 16/2 SPT-2; HPN; SJT MFX-2 Rating:15A-125V 1-15R Removable insert can be tooled with customer's logo. Check with sales department. Used On: 18/2 SPT-1; SPT-2; HPN; SVT; SJT 16/2 SPT-2; HPN; SJT 14/2 SJT BMI-2-3 Used On: 18/2 SVT; SJT 18/3 SVT; SJT Rating:7A-125V Removable insert can be tooled with customer's logo. Check with sales department. Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Business Machine Connectors-International: BME* Rating:15A-125V/250V Exceptions: CSA approval only on jacketed wire. Used On: 18/2 SPT-2; SVT; SJT 18/3 SPT-2; SVT; SJT 16/2 SJT 16/3 SPT-2; SJT 14/3 SJT BME-90L* Rating:15A-125V/250V BME-90LSC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90L150* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90L150SC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90L175SC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME* -2S -3S Rating:15A-125V/250V Exceptions: CSA approval only on jacketed wire. -2S Used On: 18/2 SPT-2; SVT; SJT 16/2 SJT -3S Used On: 18/3 SPT-2; SVT; SJT 16/3 SJT 14/3 SJT BME-90R* Rating:15A-125V/250V BME-90RSC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90R150* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90R150SC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT BME-90R175SC* Rating:15A-125V/250V Used On: 18/2 SVT; SJT 18/3 SVT; SJT 16/2 SJT 16/3 SJT 14/3 SJT Note: All of the above can be also used on shielded 18/3 SVT, 18/3 SJT, 16/3 SJT and 14/3 SJT Aluminum/Mylar Shield with Drain Wire. * Note: For mating male plug - HMB- see our Special Connectors Page. Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Strain Reliefs: BSR-F X Y Z TYPE .135 .470 .340 B .125 .125 .500 .500 .420 .430 B B .100 .475 .440 B .125 .540 .475 B .081 .470 .340 B .125 .335 .345 C Note: Section A-A can be tooled to other dimensions. Used On: 18/2 SPT-1; SPT-2; SVT; SJT 18/3 SPT-1; SPT-2; SVT; SJT BSR "X" DIM. "Y" DASH NO. DIM. -.064 -.078 .470 .470 -.125 .470 -.090 .500 Note: Section A-A can be tooled to other dimensions. Used On: 18/2 SPT-2; SVT; SJT 18/3 SPT-1; SPT-2; SVT; SJT S-BSR Note: Strain relief will accept inserts of Cat. Nos. BSR and BSR-F with a Y-Dimension of .500 or less. Used On: 18/2 SPT-2; SVT; SJT 18/3 SPT-1; SPT-2; SVT; SJT SR-L Used On: 18/2 SPT-1 SFR-R Used On: 18/2 SPT-1; SPT-2 SR-A Used On: 18/2 SPT-1; SPT-2 SFR-B Used On: 18/2 SPT-2 Note: Section A-A can be tooled to other dimensions. SR-MR Used On: 18/2 SPT-1; SPT-2 SR-125 Used On: 18/2 SPT-1; SPT-2 18/3 SPT-1; SVT SR-050 Used On: 20/2 XT; POXT 18/2 SPT-1; SPT-2 SR-093 Used On: 18/2 SPT-1; SPT-2; SVT 18/3 SPT-1; SVT SR-046 Used On: 18/2 SVT; SJT 18/3 SVT; SJT SR-E Used On: 18/2 SPT-1; SPT-2 SR-P Used On: 18/2 SPT-1; SPT-2 RY-1 Rating:10A-125V Used On: 18/3 SVT ELECTRI-CORD Manufacturing Company 312 East Main Street Westfield, PA. 16950 Telephone: 814-367-2265 ~ Fax: 814-367-2314 Since 1946 Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Wire Size Specifications: Wire Type Dimensions Stranding Ampacity Weight Lbs./1,000 Ft. 20/2 POXT .096 x .185 26/34 3 18 18/2 SPT-1 .105 x .203 41/34 10 20 18/2 SPT-2 .140 x .262 41/34 10 29 16/2 SPT-2 .155 x .285 65/34 13 37 18/2 HPN .144 x .286 41/34 10 30 16/2 HPN .155 x .305 65/34 15 38 18/3 SPT-1 .110 x .303 41/34 10 31 18/3 SPT-2 .140 x .335 41/34 10 37 18/3 SPT-3 .170 x .380 41/34 10 48 16/3 SPT-2 .155 x .380 65/34 13 49 16/3 SPT-3 .185 x .435 65/34 13 62 14/3 SPT-3 .235 x .500 41/30 15 97 18/3 HPN .136 x .335 41/34 10 42 16/3 HPN .150 x .365 65/34 15 55 18/2 SVT .240 41/34 10 34 18/2 SVT .230 65/36 10 34 18/3 SVT .255 41/34 10 42 18/3 SVT .245 65/36 10 42 18/3 SVTO .260 41/34 10 42 18/2 SJT .298 16/30 10 44 16/2 SJT .330 26/30 13 57 18/3 SJT .320 16/30 10 59 16/3 SJT .345 26/30 13 72 14/3 SJT .375 41/30 15 94 12/3 SJT .445 65/30 20 136 18/3 SV .255 41/34 10 33 18/3 SJ .320 16/30 10 60 16/3 SJ .345 26/30 13 74 14/3 SJ .375 41/30 15 97 12/3 SJ .449 65/30 20 140 18/3 SJO .320 16/30 10 60 16/3 SJO .345 26/30 13 74 14/3 SJO .375 41/30 15 87 18/3 SO .382 16/30 10 92 16/3 SO .400 26/30 13 112 14/3 SO .549 41/30 15 192 Optional Stranding 18 AWG 16/30, 41/34, 65/36 16 AWG 26/30, 65/34 14 AWG 41/30 12 AWG 65/30 Note: Above dimensions are nominal and are within UL and CSA tolerances. If wire size or O.D. is critical to your application, please check with our sales department for special arrangements. This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Cordset Cross-Reference: Belden Trade # Electri-Cord Part # Belden Trade # Electri-Cord Part # Belden Trade # Electri-Cord Part # 17009 ECM-009 17506 ECM-506 17607 ECM-607 17106 ECM-106 17507 ECM-507 17612 ECM-612 17109 ECM-109 17508 ECM-508 17613 ECM-613 17205 ECM-205 17509 ECM-509 17618 ECM-618 17236 ECM-236 17512 ECM-512 17619 ECM-619 17237 ECM-237 17513 ECM-513 17624 ECM-624 17238 ECM-238 17514 ECM-514 17629 ECM-629 17239 ECM-239 17516 ECM-516 17635 ECM-635 17250 ECM-250 17517 ECM-517 17636 ECM-636 17251 ECM-251 17518 ECM-518 17637 ECM-637 17254 ECM-254 17519 ECM-519 17740 ECM-740 17255 ECM-255 17520 ECM-520 17741 ECM-741 17276 ECM-276 17521 ECM-521 17742 ECM-742 17280 ECM-280 17523 ECM-523 17743 ECM-743 17405 ECM-405 17524 ECM-524 17745 ECM-745 17406 ECM-406 17525 ECM-525 17746 ECM-746 17407 ECM-407 17534 ECM-534 17747 ECM-747 17408 ECM-408 17535 ECM-535 17749 ECM-749 17409 ECM-409 17536 ECM-536 17750 ECM-750 17412 ECM-412 17537 ECM-537 17751 ECM-751 17419 ECM-419 17538 ECM-538 17752 ECM-752 17422 ECM-422 17539 ECM-539 17753 ECM-753 17425 ECM-425 17566 ECM-566 17757 ECM-757 17500 ECM-500 17567 ECM-567 17902 ECM-902 17501 ECM-501 17568 ECM-568 17903 ECM-903 17502 ECM-502 17569 ECM-569 17904 ECM-904 17503 ECM-503 17600 ECM-600 17905 ECM-905 17504 ECM-504 175601 ECM-601 17906 ECM-906 17505 ECM-505 17606 ECM-606 17952 ECM-952 We are able to cross-reference several of our other competitor's part numbers as well. If the only description you have is someone else's part number, the Electri-Cord problem solvers will be able to quote you immediately with our best price and delivery. This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ How to Order or Inquire: To speed up processing, please include as much as possible of the information listed below when placing an order or making an inquiry: Overall Length: Face of plug to end of longest conductor. AWG size & number of conductors. Color & UL type designation. Plug type. Appliance end finish: Molded connector - specify by Cat. No. Power supply cords - describe end processing from chart below. Strain Relief: Specify by Cat. No. Indicate location as center-line to end of longest conductor. Put-up: Hanked-self secured - Specify body and free-end lengths. Unhanked-tied in bundles. Coiled - Specify critical diameter and free-end lengths. Required approvals: UL and/or CSA Standard Factory Tolerances Overall length up to 10 ft. over 10 ft. Split or Jacket Removal. Strip. Location of Molded Strain Relief. Stagger. Hank Cap End. Body. Free End. Please download and print our O.E.M. Product Specification Sheet in PDF Format (391K) or as a JPEG Image (538K). Save from your browser or Plus or Minus 1 in. Plus 2 in. Minus 1 in. Plus or Minus 1/4 in. Plus or Minus 1/16 in. Plus 1/4 in. Minus 1/8 in. Plus or Minus 1/8 in. Plus or Minus 1 in. Plus or Minus 1 in. Plus or Minus 2 in. JPEG Image (538K). Save from your browser or download, then print from your graphics application. These files are necessarily large, but watch for our Online ordering form to be released soon. ELECTRI-CORD Manufacturing Company 312 East Main Street Westfield, PA. 16950 Telephone: 814-367-2265 ~ Fax: 814-367-2314 Since 1946 Electri-Cord Manufacturing Co. Westfield, PA ~ Since 1946 ~ Glossary of Terminology-Wire Type: Flat Wire: SPT: Stranded, Parallel, Thermoplastic This is always followed by a -1, -2 or -3, signifying insulation thickness for different applications. HPN: Heater, Parallel, Neoprene Required for heater-type application, such as irons, toasters, etc. NOTE: We can run some 20 AWG, but mostly we run 18, 16 and 14 AWG, 2 or 3 conductors. P is always Parallel Wire (Flat). Jacketed Wire: S = Stranded (or Service Wire) J = Junior Service (300 Volt). If no "J" is in the wire type, then it is a hard service (600 Volt). T = Thermoplastic. If no "T" is in the wire type, then it has a rubber jacket. O = Oil-Resistant Compound W = Weather-Resistant Compound V = Vacuum - as in vacuum cleaner. This is a small O.D. jacketed wire, very flexible and initially used for vacuum cleaners but now used on many different types of products. Available only in 18 AWG. Examples: SV = Stranded Vacuum Rubber Jacketed (NO "T") SJT = Stranded Junior Thermoplastic SJTOW = Stranded Junior Thermoplastic, Oil and Weather resistant for UL and CSA. Miscellaneous requirements: S.P. = Surface Printed N.M. = Non-Migratory compound to prevent the wire color from bleeding under unusual circumstances. VW-1 = Vertical Flame test (formerly FR-1) 60°C = Standard temperature rating (except HPN - 90°C 105°C = Electri-Cord's alternate rating (we normally don't stock 75°, 90°C) IEC, ICC = International Color Code on the inner conductors (Blue, Brown, Green w/Yellow Stripe) N.A. = North American Color Code on the inner conductors (Black, White, Green) 41/34 = Stranding - 41 strands of 34 AWG wire for each inner conductor T.C. = Tinned Copper inner conductors RIBBED = Outer jacket is striated with ribs R/S or W/S = Red or White Stripe for visual polarity inspection on Flat wire Inner Conductor Colors Function North American (NA) International (ICC) Hot Black Brown Neutral Earth (Ground) White Green Blue Green w/Yellow Stripe Metric Conversion Chart: Metric to Standard Notes Standard to Metric 25.4 mm per inch 305 mm per foot .305 M per foot 1.61 KM per mile .03937 inches per mm 39.37 inches per meter 3.28 feet per meter .622 miles per KM In. Dec. mm In. Dec. mm In. Dec. mm 1/32 .031 .793 11/32 .343 8.731 11/16 .687 17.462 1/16 .062 1.587 3/8 .375 9.525 23/32 .718 18.256 3/32 .093 2.381 13/32 .406 10.318 3/4 .750 19.050 1/8 .125 3.175 7/16 .437 11.112 25/32 .781 19.843 5/32 .156 3.968 15/32 .468 11.906 13/16 .812 20.637 3/16 .187 4.762 1/2 .500 12.700 27/32 .843 21.431 7/32 .218 5.556 17/32 .531 13.493 7/8 .875 22.225 1/4 .250 6.350 9/16 .562 14.287 29/32 .906 23.018 9/32 .281 7.143 19/32 .593 15.081 15/16 .937 23.812 5/16 .312 7.937 5/8 .625 15.875 31/32 .968 24.606 21/32 .656 16.668 1 1.000 25.400 This Page Copyright © 2003 Electri-Cord Manufacturing Co. 312 E. Main St. Westfield, PA 16950 Phone: 814-367-2265 Fax: 814-367-2314 http://www.Electri-Cord.com E-mail to: [email protected] All Rights Reserved Page Design Copyright © 2003 Stone Cabin Technologies