Gate Motor Accessories
Transcription
Gate Motor Accessories
AUTOMATION . . . . . . . . . . . . . . . . . . . . . GATE . . . BEAMS .... CENTURION PHOTON Wireless Gate Beam Set • • • • BD09 12 - 24V DC/AC Receiver, 2 x AA batteries in beam set Max operating distance of 10m N/O, N/C, potential free and fail-safe output contact IP54 Housing protection rating 3 Securi-Prod Reflective Beam - 5m • • • • • BD134 Sensing range: 5 metres Supply voltage: DC12-18V Switching capacity: 1A-AC125V/DC24V Operating temperature: -20° to 55°C Waterproof: IP-44 . . . . . . . . . . . . . . GATE . . .MOTOR . . . .ACCESSORIES ....... Vector Gate Adaptor Kit GA76-8 • Gate mounting and spreader bracket Vector Wall Adaptor Kit GA76-9 • Wall mount spreader bracket Vector Mechano Kit GA76-10 • Wall mount position adaptor plates Vector High Security Kit GA76-11 • Wall mount security and lock bracket kits www.REGALSECURITY.co.za Due to continuous improvements of these products, certain specifications may be altered without notice. E&OE © 81 AUTOMATION .......................... GATE MOTOR ACCESSORIES Gate Wheel Kit 60mm and 2 Guides • • • • GA30 800Kg Gate (maximum) Bearing 6201ZZ Ideal for round, flat and angle track Easy weld bracket Nylon Guide Rollers Pair GA33 • Stainless nut and bolt assembly • Durable rubber rollers • Precise vertical gate position maintained Gate Mate Brushes (MR. Sweepy) GA33-2 • Sweeps debris off of your gate’s rail when the gate opens or closes, ensuring a smooth opening every time. Gate Wheel Kit 80mm and 2 Guides • • • • 800Kg Gate (maximum) Bearing 6201ZZ Ideal for round, flat and angle track Easy weld bracket Gateshox Wheel Set 80mm Stainless Steel Incl. End Stopper • • • • • • GA42-6 Dramatically reduces sliding gate noise Reduces rail wear and corrugations Rubber sealed bearings Angled or round rails Quick wheel change “Click out / in” wheels Suspension system can be adjusted according to the weight of your gate Steel Rack / 2m • • • • GA42 GA40 12mm x 2m Universal tooth pitch Suitable for all motors Supplied with steel angle mounting brackets RAZ Nylon Rack 20mm x 0.5m GA39 • Supplied per 20mm x 500mm sections • Easy interlinking • Supplied with self drilling TEK screws 8x25mm Nylon Angle Galvanised Rack / 2m GA18-1 • 2m Angle galvanised channel • Nylon rack teeth • Suitable for coastal areas 82 www.REGALSECURITY.co.za Due to continuous improvements of these products, certain specifications may be altered without notice. E&OE © AUTOMATION . . . . . . . . . . . . . . GATE . . . MOTOR . . . .ACCESSORIES ....... Loop Detector Single Channel 220V Sensable • • • • • • • • • Loop Detector Single Channel 12V-24VDC MD2010 • • • • • • • GA31-6 GA31-7 Visual LED status indicators 10 - 40VDC or 7 - 28 VAC Operating voltage Audible and visual diagnostics Automatic sensitivity boost for variable vehicle heights Detection filter and high level circuit and loop protection for interference immunity Loop Detector FLUX 11 Pin 1 Channel 12/24V • • • • • • • • 3 Multiple mode selection - dual relay Loop frequency selection Sensitivity boost variable Pulse or presence mode Security mode Audible beeper for loop setup Loop fault LED CENTURION Loop Detector FLUX SA 1Ch 12/24V AC/DC • • • • • GA31-3 Compact housing Wide self-tuning range Strong loop field strength Sensitivity levels optimized for parking/vehicle access applications High interference immunity Selectable output configuration Permanent presence feature High level circuit protection Use with silicon cable CB64 GA31-8 Standardised size allowing for any existing 11 pin connector base incorporation 10 – 40VDC or 7 – 28VAC Operating Voltage Very fast detection speed and response times Excellent immunity to external interferences Audible and visual diagnostics for easy setup and maintenance Presence and pulsed outputs to suit a wide range of vehicle access applications Automatic sensitivity boost for variable vehicle heights Wide, adaptive self-tuning range www.REGALSECURITY.co.za Due to continuous improvements of these products, certain specifications may be altered without notice. E&OE © 83 AUTOMATION .......................... GATE MOTOR ACCESSORIES CENTURION A10 Anti-Theft Bracket • • • • CENTURION D5 Anti-Theft Bracket • • • • GA26-1 Secure anti-theft motor bracket mechanism Galvanised for long life Easy assembly and installation For use with circular or insurance locks GA26-4 Secure anti-theft motor bracket mechanism Galvanised for long life Easy assembly and installation For use with circular or insurance locks CENTURION D2 Theft Resistant Cage S/S 304 GA26-8 • Brushed, 304 grade stainless steel theft resistant cage for D2 motors HANSA Anti-Theft Bracket for Slider • • • • Bracket for Speedo models Secure anti-theft motor bracket mechanism Easy assembly and installation For use with circular or insurance locks Padlock Discus 70mm • • • • GA61-1 LK79-4 Case hardened steel shackle Extended body armour Stainless steel case Precision pin tumbler mechanism Padlock Insurance 90mm LK79-3-1 • 90mm Brass Monoblock • Hardened shackle • Ideal for CENTURION anti-theft bracket 84 www.REGALSECURITY.co.za Due to continuous improvements of these products, certain specifications may be altered without notice. E&OE © AUTOMATION . . . . . . . . . . . . . . GATE . . . MOTOR . . . .ACCESSORIES ....... ET 12V Red Cover Incl. Anti-Theft Bracket • • • • GA29-3 ET Motor cover including anti-theft bracket Electroplated for long life For both AC/DC and 12V ET motors Adaptor side covers and lock included 3 ET AC/DC Green Cover Incl. Anti-Theft Bracket • • • • GA29-4 ET Motor cover including anti-theft bracket Electroplated for long life For both AC/DC and 12V ET motors Adaptor side covers and lock included BA33-2 Sealed Lead Acid (SLA) Battery 12V 33AH • 12V – 33 Amp hours sealed lead acid battery • Dimensions: 195mm (L) 125mm (W) 180mm (H) • Battery terminal bolts and nuts incl. Enclosure For 33Ah Battery • • • • CA19-1 Outdoor enclosure for 12V 33A/h battery Robust fibreglass construction Outer dimensions: 275(L) x 230(W) x 240(H) mm Inner dimensions: 260(L) x 220(W) x 230(H) mm Gate Guard Alarm Swing and Sliding Gates • • • • • GA130 Gate alarm for swing and sliding gates 12VDC Input power Single relay output – N/O and N/C for siren, transmitter or GSM Zone and bypass inputs LED status and diagnostics viewing P CHECKLIST Gate Motor Battery Gate Beam Receiver - Rx Remotes - Tx Theft Bracket Intercom Rainshield Gooseneck Rack Stops Guides and Rollers Wheel kits Cable Surge protection Couplings Conduit Rip cord Conduit Welding Rods www.REGALSECURITY.co.za Due to continuous improvements of these products, certain specifications may be altered without notice. E&OE © 85