product catalog 2012

Transcription

Straumann USA
Straumann USA, LLC
60 Minuteman Road
Andover, MA 01810
Phone
800/448 8168
978/747 2500
Fax
978/747 2490
www.straumannusa.com
Straumann Canada
Straumann Canada Limited
3115 Harvester Road, Suite 100
Burlington, ON L7N 3N8
Phone
800/363 4024
905/319 2900
Fax
905/319 2911
www.straumann.ca
© Straumann USA, 2012. All rights reserved.
Straumann® and/or other trademarks and logos from Straumann® that are mentioned herein are the trademarks or registered trademarks of Straumann USA and/or its affiliates. All rights reserved.
PRoduct Catalog 2012
International Headquarters
Institut Straumann AG
Peter Merian-Weg 12
CH-4002 Basel, Switzerland
Phone+41 (0)61 965 11 11
Fax +41 (0)61 965 11 01
Straumann products are CE marked
1/12
w w w. strau m an n .c o m
USLIT 007
PRoduct Catalog
2012
Notes
The ITI (International Team for Implantology) is academic partner of Institut Straumann
in the areas of research and education.
Valid from February 1, 2012 until superseded by a new catalog.
Your
Straumann
customer no.
……………………………………………………………………………………………………………………
Notes……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………
Contents
GENERALPage
IntroductionIII
The International Team for Implantology (ITI)
IV
The Straumann Guarantee ®V
Explanation of the Symbols on Labels and Instruction LeafletsVI
Important Guidelines
VII
Key to AbbreviationsVIII
Ordering and DeliveryIX
Naming and Labeling Explanations
X
REGENERATION
Straumann® Emdogain™ and Straumann® PrefGel®2
Straumann® Bone Graft Solutions
3
– Straumann® AlloGraft 3
– Straumann® BoneCeramic™
4
Straumann® Bone Block Fixation 1.5 mm
5
SURGERY
Straumann CARES Guided Surgery10
Surgical Planning Aids
14
Overview Titanium Implants
16
Overview Roxolid® Implants
18
Standard Implants
20
Standard Plus Implants
26
Tapered Effect Implants
34
Bone Level Implants
40
Surgical Instruments
46
Auxiliary Instruments/Hygiene
62
Surgical Cassette and Surgical Kits
64
Osteotomes
73
Explantation
75
Drilling Units and Accessories, and Osstell™ mentor Smartpegs™
77
PROSTHETICSPage
Cassette, Insets and Storage System
82
Prosthetic Instruments
83
Prosthetics for Straumann® Standard,
Standard Plus and Tapered Effect Implants
– Prosthetic Planning Aids
88
89
– CARES ® Prosthetics
– Crowns and Bridges – Narrow Neck Prosthetic System
91
®
92
– synOcta Prosthetic System
– Hybrid Dentures 104
– Crowns and Bridges – Solid Abutment Prosthetic System
116
Prosthetics for Straumann® Bone Level Implants
122
®
127
– CARES Prosthetics
– Crowns and Bridges
128
– Hybrid Dentures
147
SERVICE
Service Materials
164
ADDITIONAL INFORMATION
Material Information
166
Documentation
169
INDEX
Numerical Index
172
Alphabetical Index
188
GENERAL
introduction
At Straumann, we are committed to providing high-quality and innovative solutions for dental
professionals, as simply and efficiently as possible. We always look beyond the product and try to
provide everything you need to offer your patients the best possible treatment.
You will find the contents of this catalog listed by procedure − allowing you to select the most suitable
products according to the nature of the case − as well as indexed by article number and name.
Straumann is the only company to offer a complete portfolio of surgical, restorative, oral tissue and
bone regeneration, and digital dentistry solutions. From the saving of natural teeth to complete tooth
replacement, Straumann® solutions span the continuum of dental care. Our products receive the
support of our scientific partners, the International Team for Implantology.
Although flexibility in treatment options is important to us, true Straumann quality can only be
guaranteed when you choose genuine Straumann products at every stage of the procedure.
We hope you find this catalog both interesting and informative. Please do not hesitate to contact
your local Straumann representative for further information or visit our e-shop at
www.straumann.us/e-shop for 24/7 access to the full product range.
III
GENERAL
the international team for implantology (iti)
The International Team for Implantology (ITI) unites professionals around the world from every
field of implant dentistry. As an independent academic association, the ITI actively p
romotes
networking and exchange among its members and offers a wide array of m
embership benefits.
In more than 30 years, the ITI has built a reputation for scientific rigor combined with concern
for the welfare of patients. The organization focuses on the development of well-documented
treatment guidelines backed by extensive clinical testing and the compilation of long-term results.
Straumann and the ITI enjoy a unique partnership. We are united by a shared mission: to
constantly improve treatment methods and results in implant dentistry and related tissue
regeneration for the benefit of patients.
Learn more about the ITI and register as a member at www.iti.org
IV
GENERAL
the straumann guarantee®
The Straumann Guarantee applies if Straumann® products are used in combination
with other genuine Straumann products. Provided that the conditions of the Straumann Guarantee are fulfilled, the following guarantee periods are covered:
Lifetime guarantee period: for implants
Replacement with an equivalent implant and an equivalent abutment, if necessary.
10-year guarantee period: for metal restorations
Replacement with an equivalent metal abutment (attached to a Straumann Implant)
or with an equivalent metal restoration (for tooth and implant-supported restoration).
5-year guarantee period: for ceramic restorations
Replacement with an equivalent ceramic abutment (attached to a S
traumann Implant)
or with an equivalent ceramic crown, coping or bridge restoration (for tooth and
implant-supported restorations).
Note
For applicable terms and conditions of the Straumann Guarantee (including the
Guarantee territory) please refer to the Straumann Guarantee brochure (152.360/en).
V
GENERAL
Explanation of the Symbols on Labels and Instruction Leaflets
Batch code
Non-sterile
Catalog number
Caution, consult accompanying
documents
Sterile
Use-by date
Sterilized using aseptic processing
techniques
Keep away from heat
Sterilized using irradiation
Keep away from sunlight
Lower limit of temperature
Straumann Products with the CE mark
fulfill the requirements of the Medical
Devices Directive 93/42 EEC.
…min.
…max.
Upper limit of temperature
XXXX
xxxx identify the notified body of
manufacturer
…max.
Temperature limitation
Consult instructions for use
Caution: Federal law restricts this device
to sale by or on the order of a dental
professional.
Manufacturer
…min.
Do not re-use
Non-sterile
NON
STERILE
Warning labels
VI
CAUTION
Indicates hazards or unsafe handling which might cause minor injury or damage to property
WARNING
Indicates hazards which might cause serious or fatal injury
DANGER
Indicates hazards which might cause immediate serious or fatal injury
Disclaimer of liability
Straumann® dental implants and other Straumann products are
part of an overall concept and may be used only in conjunction
with the corresponding original components and instruments
according to Institut Straumann AG’s instructions and
recommendations.
Use of products made by third parties, which are not distributed
through Institut Straumann AG, in conjunction with the Straumann®
Dental Implant System will void any warranty or other obligation,
expressed or implied, of Institut Straumann AG.
Instructions as to the application of our products take place
verbally, in writing, by electronic media or in hands-on trainings
corresponding to the state of the art at the time of introduction of
the product.
The user of Straumann products is responsible for determining
whether or not any product is suitable for a particular patient and
circumstances. Straumann disclaims any liability, expressed or
implied, and bears no responsibility for any direct, indirect,
punitive or other damages, arising out of or in connection with
any errors in professional judgment or practice in the use or
installation of Straumann products.
The user is also obliged to study the latest developments of the
Straumann Dental Implant System and their applications regularly.
Availability
Some of the products listed in this brochure are not available in all
countries.
GENERAL
Important Guidelines
Validity
Upon publication of this brochure, all previous versions are
superseded.
Caution
In addition to the caution notes in this basic information, our
products must be secured against aspiration when used intraorally.
Do not use damaged or blunt instruments.
Units per package
There is one unit in each package unless stated otherwise.
See Key to Abbreviations on Page VIII.
Documentation
For detailed instructions on the Straumann® Dental Implant System
contact your Straumann representative.
Copyright and trademarks
Straumann documents may not be reprinted or published, in whole
or part, without the written authorization of Institut Straumann AG.
Straumann® and/or other products and logos from Straumann®
that are mentioned here are trademarks or registered trademarks
of Straumann Holding AG and/or its affiliates.
Please note
The descriptions contained in this document are not sufficient
for immediate use of the Straumann Dental Implant System.
Knowledge of dental implantology and instruction in the handling
of the Straumann Dental Implant System provided by an operator
with the relevant experience are always necessary.
VII
GENERAL
Key to Abbreviations
SLActive ®
Sand-blasted, Large grit, Acid-etched, chemically active and hydrophilic
SLA®
Sand-blasted, Large grit, Acid-etched
TiZrRoxolid ® (Titanium Zirconium alloy)
VIII
Ti
Titanium
S
Standard
SP
Standard Plus
TE
Tapered Effect
BL
Bone Level
NN
Narrow Neck = implant shoulder diameter 3.5 mm, SP implants
RN
Regular Neck = implant shoulder diameter 4.8 mm, S/SP/TE implants
WN
Wide Neck = implant shoulder diameter 6.5 mm, S/SP/TE implants
NC
Narrow CrossFit ® Connection = implant diameter 3.3 mm, BL implants
RC
Regular CrossFit ® Connection = implant diameter 4.1 mm and 4.8 mm, BL implants
SCS
Screw Carrying System
TS
Transversal Screw retention
TAN
Titanium Aluminum Nitride
PEEK
Polyether Etherketone
PMMA
Polymethyl Methacrylate
POM
Polyoxymethylene
TiN
Titanium Nitride coating
LDPE
Low Density Polyethylene
PSU
Polysulfone
…V2
Pack of 2
…V4
Pack of 4
… -04
Pack of 4
…V5
Pack of 5
…V10
Pack of 10
…V20
Pack of 20
… -20
Pack of 20
Order Placement
Returns
The hours of operation for Customer Service are 8:00 a.m. –
8:00 p.m. Eastern Time, Monday through Friday.
Terms of Return
All orders received by 6:30 p.m. Eastern Time will be processed
and shipped the same day.
Shop Online
www.straumann.us/e-shop
The 2-day, 3-day, or ground shipping fee will be reduced for all
orders placed online, and is waived for orders of $500 or more.
GENERAL
Ordering and Delivery
Customers may return Straumann implants and related products for
any reason under the following conditions:
–
–
–
–
Items are in their original undamaged, unmarked, and unopened package with all factory seals intact.
Items have at least a 6 month shelf life remaining.
Shipping charges for the return are paid by the customer.
All returned product(s) is subject to inspection to ensure compliance with regulations before the return is processed.
Refund Policy (when Terms of Return are met)
Phone:
800/210 1139
Fax:
800/524 6752
Fax order forms may be printed from our website:
www.straumann.us/faxorderforms
Payment Terms
Contact our Customer Service Department or your local Territory
Manager to establish your account. Initial orders must be secured
by a major credit card.
Standard payment terms are Net 30 or credit card. We accept
MasterCard, Visa, and American Express.
Prices are subject to change without notice and do not include
sales tax.
Shipping
Standard shipping within the continental United States is second
day delivery, unless ground or 3-day is requested at time of order.
Overnight delivery service is also available at an additional cost.
Please note that not all delivery services are available to all zip
codes.
Shipping restrictions may apply to products that require special
handling, such as refrigeration.
Shipments are sent F.O.B. shipping point, pre-paid.
– Full credit up to 30 days from date of purchase.
–Exchange up to 90 days from date of purchase, when request for return is accompanied by an offsetting order of equal or greater dollar value.
Exclusions
Credit will not be given for:
– Product(s) requiring special handling, such as refrigeration.
– Product(s) financed through a third party.
– Product(s) obtained through a third party.
– Capital equipment, such as CADCAM scanners, gonyX™ tables, etc.
– Software, unless otherwise stated in the software license.
– Partial returns of promotional purchases or discounted kits.
– Shipping charges.
Return Procedure
–
–
–
–
–
–
Call Customer Service to obtain a Return Tracking Number. Please be ready to provide article numbers and product lot numbers.
Write the Return Tracking Number on a copy of the corresponding invoice, packing slip, or your practice letterhead and place it in the package with the products to be returned.
Package items in a sturdy box to avoid damage or loss.
Items missing from package or damaged due to improper packaging will not be given credit.
Return packages must be shipped via a traceable method.
Send returns to:
Straumann – Returns Department
60 Minuteman Road
Andover, MA 01810.
Do not give any item(s) to your local Sales Representative for return.
Procedures and policies as stated are subject to change without prior notice and are subject to purchase terms and conditions.
IX
GENERAL
Naming and Labeling Explanations
Color coding
yellow
Endosteal implant diameter 3.3 mm
red
green
Implant types
S: Standard Implant
SP:Standard Plus Implant
TE:Tapered Effect Implant
BL:Bone Level Implant
Connection types
Ø 3.5 mm
NN:Narrow Neck Ø 3.5 mm
Ø 4.8 mm
RN: Regular Neck Ø 4.8 mm
Ø 6.5 mm
WN:Wide Neck Ø 6.5 mm
Ø 3.3 mm
NC:Narrow CrossFit® Connection Ø 3.3 mm
Ø 4.1 mm
RC: Regular CrossFit® Connection Ø 4.1 and Ø 4.8 mm
X
Ø 4.8 mm
example of label on implant packaging
Connection type
GENERAL
naming and labeling explanations
Length of the SLA®/SLActive® surface
Implant type
Surface type
Endosteal diameter
Catalog number
Batch code
The Green Dot
128 Barcode
Manufacturer
Use by date
Caution: Federal law restricts
this device to sale by or on the order
of a dental professional
Do not re-use
Caution, consult accompanying documents
Straumann Products with the CE mark fulfill the requirements
of the Medical Devices Directive 93/42/EEC
Sterilized using irradiation
Examples
SP
SPSPSP
ØØØ
3.3
3.3
Ø3.3
3.3
NN
NN
NN
NN
88 88
SP
SPSPSP
ØØØ
4.1
4.1
RN
RN
Ø4.1
4.1
RN
RN
SLActive
SLActive
SLActive
SLActive
10
1010
10
TETETE
TE
4.8
WN
WN
ØØØ
4.8
WN
Ø4.8
4.8
WN
SLActive
SLActive
SLActive
SLActive
121212
12
BL
BLBLBL
ØØØ
4.1
4.1
Ø4.1
4.1
RC
RC
RC
RC
SLActive
SLActive
SLActive
SLActive
12
121212
Straumann ®
Straumann
Straumann
Straumann
Standard Plus Implant
Standard Plus Implant
Tapered Effect Implant
Bone Level Implant
Endosteal diameter 3.3 mm
Narrow Neck
Regular Neck
Wide Neck
Regular CrossFit ® Connection
8 mm SLA®
10 mm SLActive ®
12 mm SLActive ®
12 mm SLActive ®
XI
regeneration
REGENERATION
Straumann ® Emdogain™ and Straumann ® PrefGel ®
2
Straumann ® Bone Graft Solutions
3
– Straumann ® AlloGraft
3
– Straumann ® BoneCeramic™
4
Straumann ® Bone Block Fixation 1.5 mm
5
1
Regeneration
REGENERATION
Straumann ® Emdogain™ and Straumann ® PrefGel ®
Art. No.
Article
Dimensions
Price $
075.113
Straumann Emdogain 0.3 ml,
multipack incl. Straumann PrefGel
3 x Straumann Emdogain 0.3 ml
and 3 x Straumann PrefGel 0.6 ml
ready-to-use syringe
495.00
075.115
Straumann Emdogain 0.7 ml,
multipack incl. Straumann PrefGel
3 x Straumann Emdogain 0.7 ml
and 3 x Straumann PrefGel 0.6 ml
725.00
075.203
Straumann PrefGel 0.6 ml
5 x Straumann PrefGel 0.6 ml
45.00
Ordering and delivery of Straumann Emdogain
Ordering and delivery of Straumann PrefGel
The quality assurance system for this medical product, that
applies to both production and logistics, stipulates that it must
be kept in refrigerated storage (at 36°F – 46°F).
Interruption of refrigeration for transportation is permissible.
Straumann PrefGel must be kept in refrigerated storage
(at 36°F – 46°F). Interruption of refrigeration, e.g., during
transportation, is permissible. The package should, however,
be placed in the refrigerator as soon as possible.
For this reason, Straumann® Emdogain is only shipped
priority overnight and must be refrigerated upon receipt.
The normal terms of delivery apply for Straumann PrefGel.
The right of return does not apply to Straumann Emdogain
or Straumann PrefGel.
2
regeneration
Art. No.
Article
Dimensions
Price $
Straumann ® AlloGraft Mineralized Ground Cortical
Straumann AlloGraft GC,
250-1000 microns, 0.25 cc
Mineralized Ground Cortical
Granule size: 250-1000 microns
Unit size: 0.25 cc
40.00
070.219
250-1000 microns, 0.5 cc
Unit size: 0.5 cc
54.00
070.220
250-1000 microns, 1.0 cc
Unit size: 1.0 cc
77.00
070.221
250-1000 microns, 2.0 cc
Unit size: 2.0 cc
105.00
REGENERATION
070.218
Straumann ® AlloGraft Demineralized Ground Cortical
070.222
Straumann AlloGraft DGC,
250-1000 microns, 0.25 cc
Demineralized Ground Cortical
Unit size: 0.25 cc
43.00
070.223
250-1000 microns, 0.5 cc
Unit size: 0.5 cc
57.00
070.224
250-1000 microns, 1.0 cc
Unit size: 1.0 cc
80.00
070.225
250-1000 microns, 2.0 cc
Unit size: 2.0 cc
108.00
Straumann ® AlloGraft Mineralized Ground Cancellous
070.229
Straumann AlloGraft OCAN,
250-1000 microns, 0.25 cc
Mineralized Ground Cancellous
Unit size: 0.25 cc
65.00
070.212
250-1000 microns, 0.5 cc
Unit size: 0.5 cc
85.00
070.213
250-1000 microns, 1.0 cc
Unit size: 1.0 cc
110.00
070.214
250-1000 microns, 2.0 cc
Unit size: 2.0 cc
180.00
070.215
1000-2000 microns, 0.5 cc
Unit size: 0.5 cc
85.00
070.216
1000-2000 microns, 1.0 cc
Unit size: 1.0 cc
110.00
070.217
1000-2000 microns, 2.0 cc
Unit size: 2.0 cc
180.00
3
Regeneration
Art. No.
Article
Dimensions
Price $
REGENERATION
Straumann ® AlloGraft Mineralized Ground Cortical/Cancellous mix
070.226
Straumann AlloGraft C/C mix, Mineralized Ground Cortical/
250-1000 microns, 0.5 cc
Cancellous, Granule size: 2501000 microns, Unit size: 0.5 cc
70.00
070.227
250-1000 microns, 1.0 cc
90.00
070.228
250-1000 microns, 2.0 cc
150.00
Straumann ® BoneCeramic™
4
070.203
Straumann BoneCeramic
400–700
Granule size: 400–700 microns
Unit size: 0.25 g
Volume: approx. 0.3 ml
85.00
070.204
500–1000
Unit size: 0.5 g
125.00
070.205
500–1000
Unit size: 1.0 g
220.00
Regeneration
Straumann ® Bone Block Fixation 1.5 mm
Art. No.
Article
Dimensions
Material
Price $
041.032
Straumann Bone Block Fixation,
cassette for drills, mini-screws
and screwd river for bone block
fixation (instruments not included)
130.0 x 118.0 x
25.0 mm
thermoplastic
680.00
044.125
Glide hole drill
Ø 1.5 mm,
length 37.0 mm,
stop 20.0 mm
stainless
steel
110.00
044.126
Residual ridge drill
Ø 1.25 mm,
length 37.0 mm,
stop 16.0 mm
stainless
steel
110.00
042.700V5
Crosshead
mini-screw
Ø 1.5 mm,
length 8.0 mm
titanium
195.00
042.701V5
Crosshead
mini-screw
Ø 1.5 mm,
length 10.0 mm
titanium
195.00
042.702V5
Crosshead
mini-screw
Ø 1.5 mm,
length 12.0 mm
titanium
195.00
042.703V5
Crosshead
mini-screw
Ø 1.5 mm,
length 14.0 mm
titanium
195.00
040.360
Screwdriver complete with
screwdriver blade and screwholding device for implant
screws, crosshead Ø 1.5 mm
length 160.0 mm
aluminum,
stainless
steel
790.00
046.256
Screwdriver blade for implant
screws, crosspoint Ø 1.5 mm
length 69.0 mm
stainless
steel
320.00
046.257
Screw-holding device for
screwdriver blade 046.256
length 45.0 mm
stainless
steel
110.00
046.258
Screwdriver handle for
screwdriver blade 046.256
length 100.0 mm
aluminum,
stainless
steel
380.00
Basic set
REGENERATION
Spare parts
5
6
surgery
SURGERY
Straumann CARES ® Guided Surgery
10
14
16
Overview Roxolid ® Implants
18
Standard Implants
20
26
34
Bone Level Implants
40
46
62
Surgical Cassette and Surgical Kits
64
Osteotomes
73
Explantation
75
Drilling Units and Accessories, and Osstell™ mentor Smartpegs™
77
7
8
surgery
STRAUMANN ® CARES ® GUIDED SURGERY
SURGERY
9
Straumann® CARES® Guided Surgery
co D iagnosti X™
Art. No.
Article
Dimensions
Price $
coDiagnostiX™ licenses
019.0370
coDiagnostiX™ 8 PPP
3,000.00
019.0371
coDiagnostiX 8 PPG
8,000.00
019.0372
coDiagnostiX 8 Station
019.0373
coDiagnostiX 8 coDoctor™
18,000.00
2,300.00
coDiagnostiX™ units
coDiagnostiX 8 unit
12.00
SURGERY
019.0374
Please contact your local Straumann representative for more information about coDiagnostiX™, upgrades, spare parts, manuals and
different software modules.
10
gonyX™
Art. No.
Article
Dimensions
Material
Price $
gonyX™
019.0201
Straumann gonyX™
019.0212
NSK® handpiece for gonyX
975.00
019.0216
NSK® control unit NA
975.00
8,250.00
gonyX™ consumables
Closing Lid
for sleeve positioner, for
Ø 2.8 mm sleeves
Ø 2.8 mm
PEEK
19.00
034.057
Sleeve positioner
for gonyX, for
Ø 2.8 mm sleeves
Ø 2.8 mm
TAN
45.00
034.058-04
Closing Lid
for sleeve positioner, for
Ø 5.0 mm sleeves
Ø 5.0 mm
PEEK
19.00
034.059
Sleeve positioner
for gonyX, for
Ø 5.0 mm sleeves
Ø 5.0 mm
TAN
45.00
034.064-03
Reference pin
for templiX™ reference plate
Length 7 mm,
Ø 2.0 mm
Ti
034.066
gonyX drill set
Ø
Ø
Ø
Ø
Ø
Stainless
steel
3.0
3.8
4.6
5.4
6.3
mm,
mm,
mm,
mm,
mm
SURGERY
034.056-04
9.00
150.00
Please contact your local Straumann representative for more information about gonyX™, consumables and spare parts.
Straumann CARES Guided Surgery − Guided surgery kit and guided implants
Please find more information on the Guided Surgery kit in the section “Surgical Instruments” on p. 72. Details on the guided implants
can be found in the implant section on pgs. 16–43.
11
gonyX™
Art. No.
Article
Dimensions
Material
Price $
034.061
Stepped drill
for Ø 2.8 mm sleeves
Ø 5.0 mm,
Ø 6.3 mm,
Ø 7.3 mm
Stainless
steel
125.00
034.060
Stepped drill
for Ø 2.8 mm sleeves
Ø 2.8 mm,
Ø 3.8 mm,
Ø 4.6 mm
Stainless
steel
125.00
034.062-03
templiX ™ reference plate
Polymer
39.00
034.069V5
Girrbach Splitex ® Counter plate
SURGERY
gonyX™ consumables
30.00
Sleeves for Straumann ® Guided Surgery
034.050V4
Sleeve
Ø 5.0 mm,
height 5.0 mm
stainless
steel
90.00
034.052V4
Sleeve
Ø 2.8 mm,
height 6.0 mm
stainless
steel
90.00
034.053V4
T-sleeve
Ø 5.0 mm,
height 5.0 mm
stainless
steel
90.00
034.055V4
T-sleeve
Ø 2.8 mm,
height 6.0 mm
stainless
steel
90.00
Important
Guided instruments must not be used in combination with drill sleeves with collar (049.810V4), or drill stops (040.460,
040.454S–040.457S).
For more information on Straumann‘s Instruments for Guided Surgery, please refer to the brochure “Basic Information on
Straumann Guided Surgery” (USLIT 261).
Please contact your local Straumann representative for more information about gonyX™, consumables and spare parts.
Straumann CARES Guided Surgery − Guided surgery kit and guided implants
Please find more information on the Guided Surgery kit in the section “Surgical Instruments” on p. 72. Details on the guided implants
can be found in the implant section on p. 16–43.
12
surgery
SURGICAL PLANNING AIDS
SURGERY
13
Art. No.
Article
Dimensions
Material
Price $
049.076V4*
X-ray reference sphere
Ø 5.0 mm
stainless steel
150.215
X-ray templates for Standard
and Standard Plus implants
plastic
0.00
150.230
X-ray templates for
Tapered Effect implants
plastic
0.00
150.216
X-ray templates for
Bone Level implants
plastic
0.00
046.147
Diagnostic T
length 65.0 mm
width 33.0 mm
titanium
046.148
Standard, Standard Plus
and Tapered Effect implant
distance indicator
length 100.0 mm
titanium/
stainless steel
125.00
026.0901
Bone Level implant
distance indicator
length 100.0 mm
titanium/
stainless steel
125.00
SURGERY
13.00
* For single use
14
40.00
Art. No.
Article
Dimensions
Material
Price $
Components for fabricating an individual drill template
Drill sleeve with collar
height 10.0 mm,
outside Ø 3.5 mm,
inside Ø 2.4 mm
titanium
50.00
049.818V4
Stepped pin for 049.810V4
height 16.0 mm,
Ø 2.2/3.5 mm
titanium
35.00
049.816V4
Pin for 049.810V4
height 16.0 mm,
Ø 2.2 mm
titanium
35.00
049.817V4
Pin for 049.810V4
height 10.0 mm,
Ø 2.2 mm
titanium
35.00
049.819V4
Pin for 049.810V4
height 16.0 mm,
Ø 3.5 mm
titanium
35.00
SURGERY
049.810V4
15
slactive ® Implants
Ø 3.3 mm
RN
Ø 4.8 mm
Standard Implants
Ø 4.1 mm
RN
Ø 4.8 mm
Ø 4.8 mm
RN
Ø 4.8 mm
WN
Ø 6.5 mm
2.8 mm
SURGERY
SLActive
6 mm
8 mm
10 mm
12 mm
14 mm
16 mm
NN
Ø 3.5 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
Ø 4.8 mm
S Ø 3.3 RN
–
033.131S
033.132S
033.133S
033.134S
033.135S
S Ø 4.1 RN
033.030S
033.031S*
033.032S*
033.033S*
033.034S
033.035S
S Ø 4.8 RN
033.230S
033.231S
033.232S
033.233S
033.234S
–
S Ø 4.8 WN
033.630S
033.631S
033.632S
033.633S
–
–
RN
Ø 4.8 mm
RN
Ø 4.8 mm
RN
Ø 4.8 mm
WN
Ø 6.5 mm
1.8 mm
SLActive
6 mm
8 mm
10 mm
12 mm
14 mm
Ø 3.3 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
Ø 4.8 mm
SP Ø 3.3 NN
–
033.951S
033.952S
033.953S
033.954S
SP Ø 3.3 RN
–
033.151S
033.152S
033.153S
033.154S
SP Ø 4.1 RN
033.050S
033.051S*
033.052S*
033.053S*
033.054S
SP Ø 4.8 RN
033.250S
033.251S*
033.252S*
033.253S*
033.254S
SP Ø 4.8 WN
033.650S
033.651S
033.652S
033.653S
–
RN
Ø 4.8 mm
RN
Ø 4.8 mm
WN
Ø 6.5 mm
1.8 mm
SLActive
8 mm
10 mm
12 mm
14 mm
Bone Level Implants
SLActive
8 mm
10 mm
12 mm
14 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
TE Ø 3.3 RN
033.721S
033.722S
033.723S
033.724S
TE Ø 4.1 RN
033.761S*
033.762S*
033.763S*
033.764S
TE Ø 4.8 WN
–
033.712S
033.713S
033.714S
NC
Ø 3.3 mm
RC
Ø 4.1 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
BL Ø 3.3 NC
021.2108
021.2110
021.2112
021.2114
BL Ø 4.1 RC
021.4108*
021.4110*
021.4112*
021.4114
BL Ø 4.8 RC
021.6108*
021.6110*
021.6112*
021.6114
*Implant available as guided implant. See pages 21–43 for details.
16
RC
Ø 4.8 mm
SLA® Implants
Ø 3.3 mm
RN
Ø 4.8 mm
Standard Implants
Ø 4.1 mm
RN
Ø 4.8 mm
Ø 4.8 mm
RN
Ø 4.8 mm
WN
Ø 6.5 mm
2.8 mm
SLA
6 mm
8 mm
10 mm
12 mm
14 mm
16 mm
NN
Ø 3.5 mm
Ø 4.1 mm
Ø 4.8 mm
Ø 4.8 mm
S Ø 4.1 RN
043.030S
043.031S
043.032S
043.033S
043.034S
043.035S
S Ø 4.8 RN
043.230S
043.231S
043.232S
043.233S
043.234S
–
S Ø 4.8 WN
043.630S
043.631S
043.632S
043.633S
–
–
RN
Ø 4.8 mm
RN
Ø 4.8 mm
RN
Ø 4.8 mm
WN
Ø 6.5 mm
1.8 mm
SLA
6 mm
8 mm
10 mm
12 mm
14 mm
Ø 3.3 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
Ø 4.8 mm
SP Ø 3.3 NN
–
042.930S
042.931S
042.932S
042.933S
SP Ø 3.3 RN
–
043.151S
043.152S
043.153S
043.154S
SP Ø 4.1 RN
043.050S
043.051S
043.052S
043.053S
043.054S
SP Ø 4.8 RN
043.250S
043.251S
043.252S
043.253S
043.254S
SP Ø 4.8 WN
043.650S
043.651S
043.652S
043.653S
–
RN
Ø 4.8 mm
RN
Ø 4.8 mm
SURGERY
Ø 3.3 mm
S Ø 3.3 RN
–
043.131S
043.132S
043.133S
043.134S
043.135S
WN
Ø 6.5 mm
1.8 mm
SLA
8 mm
10 mm
12 mm
14 mm
Bone Level Implants
SLA
8 mm
10 mm
12 mm
14 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
TE Ø 3.3 RN
043.721S
043.722S
043.723S
043.724S
TE Ø 4.1 RN
043.761S
043.762S
043.763S
043.764S
TE Ø 4.8 WN
–
043.712S
043.713S
043.714S
NC
Ø 3.3 mm
RC
Ø 4.1 mm
RC
Ø 4.8 mm
Ø 3.3 mm
Ø 4.1 mm
Ø 4.8 mm
BL Ø 3.3 NC
021.2408
021.2410
021.2412
021.2414
BL Ø 4.1 RC
021.4408
021.4410
021.4412
021.4414
BL Ø 4.8 RC
021.6408
021.6410
021.6412
021.6414
17
Overview Roxolid ® Implants
SLActive ® Implants
Ø 3.3 mm
RN
Ø 4.8 mm
Standard Implants
2.8 mm
Ø 3.3 mm
SURGERY
SLActive
8 mm
10 mm
12 mm
14 mm
16 mm
S Ø 3.3 RN
033.431S*
033.432S*
033.433S*
033.434S
033.435S
RN
Ø 4.8 mm
1.8 mm
Ø 3.3 mm
SLActive
8 mm
10 mm
12 mm
14 mm
SP Ø 3.3 RN
033.451S*
033.452S*
033.453S*
033.454S
RN
Ø 4.8 mm
1.8 mm
Ø 3.3 mm
SLActive
8 mm
10 mm
12 mm
14 mm
Bone Level Implants
TE Ø 3.3 RN
033.751S
033.752S
033.753S
033.754S
NC
Ø 3.3 mm
Ø 3.3 mm
SLActive
8 mm
10 mm
12 mm
14 mm
18
BL Ø 3.3 NC
021.2208
021.2210
021.2212
021.2214
*Implant available as guided implant. See pages 21–43 for details.
surgery
STANDARD IMPLANTS
SURGERY
19
Standard Implants Ø 3.3 mm
Regular Neck Ø 4.8 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.131S
043.131S
Standard implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.132S
043.132S
Standard implant
SLActive/SLA 10.0 mm
titanium
395.00 / 345.00
033.133S
043.133S
Standard implant
titanium
395.00 / 345.00
033.134S
043.134S
Standard implant
titanium
395.00 / 345.00
033.135S
043.135S
Standard implant
titanium
395.00 / 345.00
SURGERY
Closure screws and healing caps
048.371V4
RN Closure screw, small
internal
titanium
145.00
048.373V4
RN Closure screw, large
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
4.8
mm
2.8 mm
SLActive®/SLA®
3.3
mm
2.8
mm
20
Applications
Standard implants Ø 3.3 mm RN are an alternative in the case of a minimal ridge width of
5.5 mm and a minimal mesio-distal gap width between adjacent teeth of 7.0 mm. Due to
their lower mechanical strength, compared to Ø 4.1 mm implants, these implants should be
used exclusively for the following situations:
– Edentulous jaw:
4 implants S/SP Ø 3.3 mm RN in conjunction with a bar construction
– Partially edentulous jaw:
In the case of fixed reconstruction, combined with Ø 4.1 mm implants and splinted with
a superstructure
– As a general rule, always use the largest possible implant diameter.
Caution
Placement in the molar region is not recommended.
Standard Roxolid ® Implants Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
033.431S
Standard Roxolid implant
SLActive 8.0 mm
TiZr
445.00
033.432S
SLActive 10.0 mm
TiZr
445.00
033.433S
SLActive 12.0 mm
TiZr
445.00
033.434S
SLActive 14.0 mm
TiZr
445.00
033.435S
SLActive 16.0 mm
TiZr
445.00
033.431G
Standard Roxolid guided
implant
SLActive 8.0 mm
TiZ
460.00
033.432G
implant
SLActive 10.0 mm
TiZr
460.00
033.433G
implant
SLActive 12.0 mm
TiZr
460.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
SLActive ®
Straumann Standard Implants - Guided
SURGERY
Note
Straumann guided implants can be inserted fully guided through the Straumann sleeves with an internal diameter of Ø 5.0 mm.
For more information on Straumann‘s Guided Implants and Instruments for Guided Surgery , please refer to the brochure “Basic
Information on Straumann Guided Surgery” (USLIT 261).
4.8
mm
2.8 mm
SLActive®
3.3
mm
2.8
mm
Applications
Standard Roxolid ® implants Ø 3.3 mm RN are an alternative in the case of a minimal ridge
width of 5.5 mm and a minimal mesio-distal gap width between adjacent teeth of
7.0 mm. Because of their reduced mechanical stability, small diameter implants are only
used in cases with a low mechanical load. As a general rule, always use the largest
possible implant diameter.
Caution
21
SURGERY
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.030S*
043.030S*
Standard implant
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.031S
043.031S
Standard implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.032S
043.032S
Standard implant
titanium
395.00 / 345.00
033.033S
043.033S
Standard implant
titanium
395.00 / 345.00
033.034S
043.034S
Standard implant
titanium
395.00 / 345.00
033.035S
043.035S
Standard implant
titanium
395.00 / 345.00
Straumann Standard Implants - Guided
033.031G
Standard guided implant
SLActive 8.0 mm
titanium
410.00
033.032G
SLActive 10.0 mm
titanium
410.00
033.033G
SLActive 12.0 mm
titanium
410.00
048.371V4
048.373V4
internal
titanium
145.00
RN Closure screw, large height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
Note
For more information please refer to the brochure “Basic Information on Straumann Guided Surgery” (USLIT 261).
4.8
mm
2.8 mm
SLActive®/SLA®
4.1
mm
3.5
mm
22
Applications
Standard implants Ø 4.1 mm RN can be used for oral endosteal implant placement in the
maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with
a minimal ridge width of 6.0 mm and a minimal mesio-distal gap width between adjacent
teeth of 7.0 mm.
*Application of SLActive ®/SLA® 6.0 mm
Because of the reduced surface area for anchorage in the bone, these implants are to be
used solely for the following situations:
– A s an additional implant together with longer implants to support implant-borne
reconstructions.
– A s an auxiliary implant for implant-borne bar constructions supporting full dentures in a
seriously atrophied mandible.
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.230S*
043.230S*
Standard implant
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.231S
043.231S
Standard implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.232S
043.232S
Standard implant
titanium
395.00 / 345.00
033.233S
043.233S
Standard implant
titanium
395.00 / 345.00
033.234S
043.234S
Standard implant
titanium
395.00 / 345.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
2.8 mm
SLActive®/SLA®
4.8
mm
4.2
mm
SURGERY
4.8
mm
Applications
Standard implants Ø 4.8 mm RN can be used for oral endosteal implant placement
in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous
patients with a minimal ridge width of 7.0 mm and a minimal mesio-distal gap width
between adjacent teeth of 7.0 mm.
Because of the reduced surface area for anchorage in the bone, these implants are
to be used solely for the following situations:
reconstructions.
– A s an auxiliary implant for implant-borne bar constructions supporting full dentures
in a seriously atrophied mandible.
23
Wide Neck Ø 6.5 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.630S*
043.630S*
Standard implant
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.631S
043.631S
Standard implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.632S
043.632S
Standard implant
titanium
395.00 / 345.00
033.633S
043.633S
Standard implant
titanium
395.00 / 345.00
048.375
WN Closure screw
internal
titanium
55.00
048.030
WN Healing cap,
labial bevel
height 2.0 mm
titanium
55.00
048.038
WN Healing cap
height 2.0 mm
titanium
55.00
048.039
WN Healing cap
height 3.0 mm
titanium
55.00
048.053
WN Healing cap
height 4.5 mm
titanium
55.00
SURGERY
6.5 mm
2.8 mm
SLActive®/SLA®
4.8
mm
4.2
mm
24
Applications
Standard implants Ø 4.8 mm WN can be used for oral endosteal implant placement
in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous
patients with a minimal ridge width of 7.0 mm and a minimal mesio-distal gap width
between adjacent teeth of 8.5 mm.
Because of the reduced surface area for anchorage in the bone, these implants are to
be used solely for the following situations:
reconstructions.
– A s an auxiliary implant for implant-borne bar constructions supporting full dentures
in a seriously atrophied mandible.
surgery
STANDARD PLUS IMPLANTS
SURGERY
25
Standard Plus Implants Ø 3.3 mm
Narrow Neck Ø 3.5 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.951S
042.930S
Standard Plus implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.952S
042.931S
titanium
395.00 / 345.00
033.953S
042.932S
titanium
395.00 / 345.00
033.954S
042.933S
titanium
395.00 / 345.00
048.043
NN Healing cap with
integral occlusal screw
Ø 4.0 mm,
height 3.4 mm
titanium/
titanium alloy
55.00
048.374*
NN Closure screw with
hex socket
Ø 3.1 mm,
height 1.8 mm
titanium
55.00
048.050
NN Protective cap with
integral occlusal screw
Ø 4.0 mm,
height 3.4 mm
polymer/
titanium alloy
55.00
SURGERY
Healing and protective caps
* Requires hexagonal screwdriver, Art. No. 046.421
3.5
mm
1.8 mm
SLActive®/SLA®
Caution
3.3
mm
2.8
mm
26
Applications
Standard Plus implants Ø 3.3 mm NN are small one-part implants for narrow interdental
spaces and ridges with a minimal ridge width of 5.5 mm and a minimal mesio-distal
gap width between adjacent teeth of 5.5 mm. As a general rule, always use the largest
possible implant diameter.
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.151S
043.151S
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.152S
043.152S
titanium
395.00 / 345.00
033.153S
043.153S
titanium
395.00 / 345.00
033.154S
043.154S
titanium
395.00 / 345.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
RN Healing cap, labial
bevel, small
height 2.0 mm
titanium
55.00
048.029
bevel, large
height 3.5 mm
titanium
55.00
1.8 mm
SLActive®/SLA®
3.3
mm
2.8
mm
SURGERY
4.8
mm
Applications
The smooth neck section of Standard Plus implants is 1.0 mm shorter than with
Standard implants. Standard Plus implants are particularly suitable for use in the
esthetic region. The implant shoulder should be positioned about 1.0 mm apical to
the cemento-enamel junction (CEJ) of the contralateral tooth or 2.0 mm subgingival of
the prospective gingival margin. As a general rule, always use the largest possible
implant diameter.
Standard Plus implants Ø 3.3 mm RN have the same applications as Standard
implants Ø 3.3 mm, RN (see page 20).
Caution
27
Standard Plus Roxolid ® Implants Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
033.451S
Standard Plus Roxolid implant
SLActive 8.0 mm
TiZr
445.00
033.452S
SLActive 10.0 mm
TiZr
445.00
033.453S
SLActive 12.0 mm
TiZr
445.00
033.454S
SLActive 14.0 mm
TiZr
445.00
SLActive ®
SURGERY
Straumann Standard Plus Implants - Guided
033.451G
Standard Plus Roxolid
guided implant
SLActive 8.0 mm
TiZr
460.00
033.452G
guided implant
SLActive 10.0 mm
TiZr
460.00
033.453G
guided implant
SLActive 12.0 mm
TiZr
460.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
RN Healing cap, labial bevel,
small
height 2.0 mm
titanium
55.00
048.029
large
height 3.5 mm
titanium
55.00
Note
4.8
mm
1.8 mm
SLActive®
3.3
mm
2.8
mm
28
Applications
The smooth neck section of Standard Plus Roxolid ® implants is 1.0 mm shorter than with
Standard implants. Standard Plus implants are particularly suitable for use in the esthetic region.
The implant shoulder should be positioned about 1.0 mm apical to the cemento-enamel junction
(CEJ) of the contralateral tooth or 2.0 mm subgingival of the prospective gingival margin. As a
general rule, always use the largest possible implant diameter.
Standard Plus Roxolid® implants Ø 3.3 mm RN have the same applications as Standard Roxolid®
implants Ø 3.3 mm, RN (see page 21).
Caution
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.050S*
043.050S*
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.051S
043.051S
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.052S
043.052S
titanium
395.00 / 345.00
033.053S
043.053S
titanium
395.00 / 345.00
033.054S
043.054S
titanium
395.00 / 345.00
Standard Plus
guided implant
SLActive 8.0 mm
titanium
410.00
033.052G
Standard Plus
guided implant
SLActive 10.0 mm
titanium
410.00
033.053G
Standard Plus
guided implant
SLActive 12.0 mm
titanium
410.00
SURGERY
033.051G
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
bevel, small
height 2.0 mm
titanium
55.00
048.029
bevel, large
height 3.5 mm
titanium
55.00
Note
4.8
mm
1.8 mm
SLActive /SLA
®
Applications
The smooth neck section of Standard Plus implants is 1.0 mm shorter than with Standard implants.
Standard Plus implants are particularly suitable for use in the esthetic region. The implant shoulder
should be positioned about 1.0 mm apical to the cemento-enamel junction (CEJ) of the contralateral tooth or 2.0 mm subgingival of the prospective gingival margin.
Standard Plus implants Ø 4.1 mm RN have the same applications as Standard implants
Ø 4.1 mm, RN (see page 22).
®
4.1
mm
3.5
mm
Due to the reduced surface area for anchorage in the bone, these implants are to be used solely
for the following situations:
– A s an additional implant together with longer implants to support implant-borne reconstructions.
29
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.250S*
043.250S*
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.251S
043.251S
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.252S
043.252S
titanium
395.00 / 345.00
033.253S
043.253S
titanium
395.00 / 345.00
033.254S
043.254S
titanium
395.00 / 345.00
SURGERY
033.251G
Standard Plus
guided implant
SLActive 8.0 mm
titanium
410.00
033.252G
Standard Plus
guided implant
SLActive 10.0 mm
titanium
410.00
033.253G
Standard Plus
guided implant
SLActive 12.0 mm
titanium
410.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
bevel, small
height 2.0 mm
titanium
55.00
048.029
bevel, large
height 3.5 mm
titanium
55.00
Note
Please refer to the brochure “Basic Information on Straumann Guided Surgery” (USLIT 261).
4.8
mm
1.8 mm
Standard Plus implants Ø 4.8 mm RN have the same applications as Standard implants
Ø 4.8 mm RN (see page 23).
SLActive®/SLA®
4.8
mm
4.2
mm
30
Applications
The smooth neck section of Standard Plus implants is 1.0 mm shorter than with Standard
implants. Standard Plus implants are particularly suitable for use in the esthetic region. The
implant shoulder should be positioned about 1.0 mm apical to the cemento-enamel junction
(CEJ) of the contralateral tooth or 2.0 mm subgingival of the prospective gingival margin.
Due to the reduced surface area for anchorage in the bone, these implants are to be used
solely for the following situations:
Wide Neck Ø 6.5 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.650S*
043.650S*
SLActive/SLA 6.0 mm
titanium
395.00 / 345.00
033.651S
043.651S
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.652S
043.652S
titanium
395.00 / 345.00
033.653S
043.653S
titanium
395.00 / 345.00
048.375
WN Closure screw
internal
titanium
55.00
048.030
WN Healing cap,
labial bevel
height 2.0 mm
titanium
55.00
048.038
WN Healing cap
height 2.0 mm
titanium
55.00
048.039
WN Healing cap
height 3.0 mm
titanium
55.00
048.053
WN Healing cap
height 4.5 mm
titanium
55.00
1.8 mm
SURGERY
6.5 mm
Applications
The smooth neck section of Standard Plus implants is 1.0 mm shorter than with Standard
implants. Standard Plus implants are particularly suitable for use in the esthetic region. The
implant shoulder should be positioned about 1.0 mm apical to the cemento-enamel junction
(CEJ) of the contralateral tooth or 2.0 mm subgingival of the prospective gingival margin.
SLActive®/SLA®
4.8
mm
4.2
mm
Standard Plus implants Ø 4.8 mm WN have the same applications as Standard implants Ø
4.8 mm, WN (see page 24).
Due to the reduced surface area for anchorage in the bone, these implants are to be used
solely for the following situations:
.
31
surgery
TAPERED EFFECT IMPLANTS
SURGERY
33
Tapered Effect Implants Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.721S
043.721S
Tapered Effect implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.722S
043.722S
titanium
395.00 / 345.00
033.723S
043.723S
titanium
395.00 / 345.00
033.724S
043.724S
titanium
395.00 / 345.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
bevel, small
height 2.0 mm
titanium
55.00
048.029
bevel, large
height 3.5 mm
titanium
55.00
SURGERY
4.8
mm
1.8 mm
SLActive®/SLA®
3.3
mm
2.8
mm
34
Applications
Tapered Effect implants Ø 3.3 mm RN can be used for oral endosteal implant
placement in the maxilla and mandible, for functional and esthetic rehabilitation of
edentulous patients with a minimal ridge width of 7.0 mm and a minimal mesio-distal
gap width between adjacent teeth of 7.0 mm.
Caution
Tapered Effect Roxolid ® Implants Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
033.751S
Tapered Effect Roxolid implant
SLActive 8.0 mm
TiZr
445.00
033.752S
SLActive 10.0 mm
TiZr
445.00
033.753S
SLActive 12.0 mm
TiZr
445.00
033.754S
SLActive 14.0 mm
TiZr
445.00
SLActive ®
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
small
height 2.0 mm
titanium
55.00
048.029
large
height 3.5 mm
titanium
55.00
4.8
mm
1.8 mm
SLActive®
3.3
mm
2.8
mm
SURGERY
048.371V4
Applications
Tapered Effect Roxolid ® implants Ø 3.3 mm RN can be used for oral endosteal implant
gap width between adjacent teeth of 7.0 mm. Because of their reduced mechanical
stability, small diameter implants are only used in cases with a low mechanical load.
Caution
35
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.761S
043.761S
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
033.762S
043.762S
titanium
395.00 / 345.00
033.763S
043.763S
titanium
395.00 / 345.00
033.764S
043.764S
titanium
395.00 / 345.00
SURGERY
Straumann Tapered Effect Implants - Guided
033.761G
Tapered Effect
guided implant
SLActive 8.0 mm
titanium
410.00
033.762G
Tapered Effect
guided implant
SLActive 10.0 mm
titanium
410.00
033.763G
Tapered Effect
guided implant
SLActive 12.0 mm
titanium
410.00
048.371V4
internal
titanium
145.00
048.373V4
height 1.5 mm
titanium
145.00
048.033
RN Healing cap
height 2.0 mm
titanium
55.00
048.034
RN Healing cap
height 3.0 mm
titanium
55.00
048.037
RN Healing cap
height 4.5 mm
titanium
55.00
048.028
bevel, small
height 2.0 mm
titanium
55.00
048.029
bevel, large
height 3.5 mm
titanium
55.00
Note
4.8
mm
1.8 mm
SLActive®/SLA®
4.1
mm
3.5
mm
36
Applications
Tapered Effect implants Ø 4.1 mm RN can be used for oral endosteal implant
Wide Neck Ø 6.5 mm
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
033.712S
043.712S
titanium
395.00 / 345.00
033.713S
043.713S
titanium
395.00 / 345.00
033.714S
043.714S
titanium
395.00 / 345.00
048.375
WN Closure screw
internal
titanium
55.00
048.030
WN Healing cap,
labial bevel
height 2.0 mm
titanium
55.00
048.038
WN Healing cap
height 2.0 mm
titanium
55.00
048.039
WN Healing cap
height 3.0 mm
titanium
55.00
048.053
WN Healing cap
height 4.5 mm
titanium
55.00
1.8 mm
SLActive®/SLA®
SURGERY
6.5
mm
Applications
Tapered Effect implants Ø 4.8 mm WN can be used for oral endosteal implant
4.8
mm
4.2
mm
37
surgery
BONE LEVEL IMPLANTS
SURGERY
39
Bone Level Implants Ø 3.3 mm
Narrow C ross Fit ® Connection
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
021.2108
021.2408
Bone Level implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
021.2110
021.2410
Bone Level implant
titanium
395.00 / 345.00
021.2112
021.2412
Bone Level implant
titanium
395.00 / 345.00
021.2114
021.2414
Bone Level implant
titanium
395.00 / 345.00
024.2100-04*
NC Closure screw
height 0 mm
titanium
145.00
024.2105-04*
NC Closure screw
height 0.5 mm
titanium
145.00
024.2222
NC Healing abutment,
conical shape
Ø 3.6 mm,
height 2.0 mm
titanium
60.00
024.2224
conical shape
Ø 3.6 mm,
height 3.5 mm
titanium
60.00
024.2226
conical shape
Ø 3.6 mm,
height 5.0 mm
titanium
60.00
024.2242
conical shape
Ø 4.8 mm,
height 2.0 mm
titanium
60.00
024.2244
conical shape
Ø 4.8 mm,
height 3.5 mm
titanium
60.00
024.2246
conical shape
Ø 4.8 mm,
height 5.0 mm
titanium
60.00
024.2234
bottle shape
Ø 3.3 mm,
height 3.5 mm
titanium
60.00
024.2236
bottle shape
Ø 3.3 mm,
height 5.0 mm
titanium
60.00
024.2270
customizable
Ø 5.0 mm
polymer
60.00
SURGERY
Closure screws and healing abutments
*Bone Level closure screws are delivered sterile and ready to use.
3.3
mm
SLActive®/SLA®
3.3
mm
Applications
Bone Level implants Ø 3.3 mm are small diameter implants for narrow interdental spaces
and ridges with a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width
between adjacent teeth at bone level of 6.5 mm. Due to their reduced mechanical stability,
small diameter implants are used only in cases with a low mechanical load. As a general
rule, always use the largest possible implant diameter.
Caution
Restoration
Bone Level implants Ø 3.3 mm are restored with Narrow CrossFit (NC) secondary
components.
40
Bone Level Roxolid ® Implants Ø 3.3 mm
Narrow C ross Fit ® Connection
Art. No.
Article
Dimensions
Material
Price $
021.2208
Bone Level Roxolid implant
SLActive ® 8.0 mm
TiZr
445.00
021.2210
SLActive ® 10.0 mm
TiZr
445.00
021.2212
SLActive ® 12.0 mm
TiZr
445.00
021.2214
SLActive ® 14.0 mm
TiZr
445.00
024.2100-04*
NC Closure screw
height 0 mm
titanium
145.00
024.2105-04*
NC Closure screw
height 0.5 mm
titanium
145.00
024.2222
conical shape
Ø 3.6 mm,
height 2.0 mm
titanium
60.00
024.2224
conical shape
Ø 3.6 mm,
height 3.5 mm
titanium
60.00
024.2226
conical shape
Ø 3.6 mm,
height 5.0 mm
titanium
60.00
024.2242
conical shape
Ø 4.8 mm,
height 2.0 mm
titanium
60.00
024.2244
conical shape
Ø 4.8 mm,
height 3.5 mm
titanium
60.00
024.2246
conical shape
Ø 4.8 mm,
height 5.0 mm
titanium
60.00
024.2234
bottle shape
Ø 3.3 mm,
height 3.5 mm
titanium
60.00
024.2236
bottle shape
Ø 3.3 mm,
height 5.0 mm
titanium
60.00
024.2270
customizable
Ø 5.0 mm
polymer
60.00
SLActive ®
SURGERY
3.3
mm
SLActive®
3.3
mm
Applications
Bone Level Roxolid® implants Ø 3.3 mm are small diameter implants for narrow interdental spaces
and ridges with a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width between
adjacent teeth at bone level of 6.5 mm. Because of their reduced mechanical stability, small
diameter implants are only used in cases with a low mechanical load. As a general rule, always
use the largest possible implant diameter.
Caution
Restoration
Bone Level implants Ø 3.3 mm are restored with Narrow CrossFit (NC) secondary
components.
41
Regular C ross Fit ® Connection
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
021.4108
021.4408
Bone Level implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
021.4110
021.4410
Bone Level implant
titanium
395.00 / 345.00
021.4112
021.4412
Bone Level implant
titanium
395.00 / 345.00
021.4114
021.4414
Bone Level implant
titanium
395.00 / 345.00
SURGERY
Straumann Bone Level Implants - Guided
021.4108G
Bone Level guided implant SLActive 8.0 mm
titanium
410.00
021.4110G
titanium
410.00
021.4112G
titanium
410.00
024.4100-04*
RC Closure screw
height 0 mm
titanium
145.00
024.4105-04*
RC Closure screw
height 0.5 mm
titanium
145.00
024.4222
RC Healing abutment,
conical shape
Ø 4.5 mm,
height 2.0 mm
titanium
60.00
024.4224
conical shape
Ø 4.5 mm,
height 4.0 mm
titanium
60.00
024.4226
conical shape
Ø 4.5 mm,
height 6.0 mm
titanium
60.00
024.4242
conical shape
Ø 6.0 mm,
height 2.0 mm
titanium
60.00
024.4244
conical shape
Ø 6.0 mm,
height 4.0 mm
titanium
60.00
024.4246
conical shape
Ø 6.0 mm,
height 6.0 mm
titanium
60.00
024.4234
bottle shape
Ø 4.4 mm,
height 4.0 mm
titanium
60.00
024.4236
bottle shape
Ø 4.7 mm,
height 6.0 mm
titanium
60.00
024.4270
customizable
Ø 7.0 mm
PEEK
60.00
Note
4.1
mm
SLActive®/SLA®
42
4.1
mm
Applications
Bone Level implants Ø 4.1 mm can be used for oral endosteal implant placement in the
maxilla and mandible, for functional and esthetic rehabilitation of edentulous and partially
edentulous patients with a minimal ridge width of 6.0 mm and a minimal mesio-distal gap
width between adjacent teeth at bone level of 7.0 mm.
Restoration
Bone Level implants Ø 4.1 mm are restored with Regular CrossFit (RC) secondary components.
Regular C ross Fit ® Connection
Art. No.
Article
Dimensions
Material
Price $
SLActive / SLA
SLActive ®
SLA®
021.6108
021.6408
Bone Level implant
SLActive/SLA 8.0 mm
titanium
395.00 / 345.00
021.6110
021.6410
Bone Level implant
titanium
395.00 / 345.00
021.6112
021.6412
Bone Level implant
titanium
395.00 / 345.00
021.6114
021.6414
Bone Level implant
titanium
395.00 / 345.00
Straumann Bone Level Implants - Guided
titanium
410.00
021.6110G
titanium
410.00
021.6112G
titanium
410.00
SURGERY
021.6108G
024.4100-04*
RC Closure screw
height 0 mm
titanium
145.00
024.4105-04*
RC Closure screw
height 0.5 mm
titanium
145.00
024.4222
conical shape
Ø 4.5 mm,
height 2.0 mm
titanium
60.00
024.4224
conical shape
Ø 4.5 mm,
height 4.0 mm
titanium
60.00
024.4226
conical shape
Ø 4.5 mm,
height 6.0 mm
titanium
60.00
024.4242
conical shape
Ø 6.0 mm,
height 2.0 mm
titanium
60.00
024.4244
conical shape
Ø 6.0 mm,
height 4.0 mm
titanium
60.00
024.4246
conical shape
Ø 6.0 mm,
height 6.0 mm
titanium
60.00
024.4234
bottle shape
Ø 4.4 mm,
height 4.0 mm
titanium
60.00
024.4236
bottle shape
Ø 4.7 mm,
height 6.0 mm
titanium
60.00
024.4270
customizable
Ø 7.0 mm
PEEK
60.00
Note
4.8
mm
SLActive®/SLA®
4.8
mm
Applications
Bone Level implants Ø 4.8 mm can be used for oral endosteal implant placement in
the maxilla and mandible, for functional and esthetic rehabilitation of edentulous and
partially edentulous patients with a minimal ridge width of 7.0 mm and a minimal mesiodistal gap width between adjacent teeth at bone level of 8.0 mm. They are especially
suited for wider interdental spaces and ridges.
Restoration
Bone Level implants Ø 4.8 mm are restored with Regular CrossFit (RC) secondary components.
43
surgery
SURGICAL INSTRUMENTS
SURGERY
45
SURGERY
Single-Patient Drills (drill stop compatible)
Art. No.
Article
Dimensions
Material
Price $
040.440S
Drill set, short, drill stop compatible
for Ø 3.3 mm implant,
single-patient use, sterile
Ø 2.2 mm,
Ø 2.8 mm,
length 33.0 mm
stainless
steel
40.00
040.441S
Drill set, long, drill stop compatible
Ø 2.2 mm,
Ø 2.8 mm,
length 41.0 mm
stainless
steel
40.00
040.443S
Ø 2.2 mm,
Ø 2.8 mm,
Ø 3.5 mm,
length 33.0 mm
stainless
steel
60.00
040.444S
Ø 2.2 mm,
Ø 2.8 mm,
Ø 3.5 mm,
length 41.0 mm
stainless
steel
60.00
040.446S
Ø 2.2 mm,
Ø 2.8 mm,
Ø 3.5 mm,
Ø 4.2 mm,
length 33.0 mm
stainless
steel
70.00
040.447S
Ø 2.2 mm,
Ø 2.8 mm,
Ø 3.5 mm,
Ø 4.2 mm,
length 41.0 mm
stainless
steel
70.00
Application
Single-patient drills are intended for all implant bed preparation procedures with the Straumann® Dental Implant System.
They are supplied sterile-packed and must only be used for one patient and one surgery. Single-patient drills can minimize the
infection risk for patients, and their color coding simplifies implant bed preparation.
collar for drill stop mounting
Warning
Single-patient drills are delivered sterile and cannot be resterilized!
Resterilization renders these drills unusable.
Single-patient drill, drill stop compatible (f.l.t.r.)
Ø 2.2 mm, Ø 2.8 mm, Ø 3.5 mm, Ø 4.2 mm
46
Note
Single-patient drills must not be used in conjunction with
Straumann Instruments for Guided Surgery.
Straumann ® Drill Stop
Article
Price $
040.460
Drill stop kit: 3 x drill stop set, type A; 3 x drill stop set, type B;
3 x drill stop set, type C; 3 x drill stop set, type D; 1 x drill stop aid
375.00
040.454S
Refill package: Drill stop set, type A, for short drill 12.0 mm/
long drill 16.0 mm, Ø 3.3/4.1/4.8 mm implants
30.00
040.455S
Refill package: Drill stop set, type B, for short drill 10.0 mm/
30.00
040.456S
Refill package: Drill stop set, type C, for short drill 8.0 mm/
30.00
040.457S
Refill package: Drill stop set, type D, for short drill 6.0 mm/
30.00
040.461
Drill stop aid
80.00
SURGERY
Art. No.
The Straumann ® Drill Stop provides precise control over drilling depth during implant bed preparation for the placement of
Straumann ® dental implants. Delivered in sterile sets, the drill stops are ready to use. The Straumann ® Drill Stop is designed for
single-patient use only and must be used in conjunction with the single-patient drills specifically designed for them.
Each Straumann ® Drill Stop set includes drill stops with the
following diameters:
Ø 2.2 mm
Ø 2.8 mm
Ø 3.5 mm
Ø 4.2 mm
Ø 2.2 mm (blue), Ø 2.8 mm (yellow), Ø 3.5 mm (red),
Ø 4.2 mm (green). These diameters correspond to the
diameters of the Straumann drills.
Drill stop set for one depth
Important
Straumann® drill stops are not recommended for:
– Extraction sites, where bone cavity is often wider than the diameter necessary to hold the drill stop.
– Use with drill templates, due to the interference from or with the template.
Straumann drill stops must not be used in conjunction with Straumann Instruments for Guided Surgery.
47
Straumann ® Guided Surgery
Art. No.
Article
Dimensions
Material
Price $
SURGERY
Guided milling cutters, pilot and twist drills
034.215
Milling cutter, guided
Ø 2.8 mm,
length 32.5 mm
stainless
steel
105.00
034.415
Ø 3.5 mm,
length 32.5 mm
stainless
steel
105.00
034.615
Ø 4.2 mm,
length 32.5 mm
stainless
steel
105.00
034.123
Pilot drill, short, guided
Ø 2.2 mm,
length 32.0 mm
stainless
steel
105.00
034.126
Pilot drill, long, guided
Ø 2.2 mm,
length 36.0 mm
stainless
steel
105.00
034.129
Pilot drill, extra-long, guided
Ø 2.2 mm,
length 40.0 mm
stainless
steel
105.00
034.223
Twist drill PRO, short, guided
Ø 2.8 mm,
length 32.0 mm
stainless
steel
105.00
034.226
Twist drill PRO, long, guided
Ø 2.8 mm,
length 36.0 mm
stainless
steel
105.00
034.229
Twist drill PRO, extra-long, guided
Ø 2.8 mm,
length 40.0 mm
stainless
steel
105.00
034.423
Ø 3.5 mm,
length 32.0 mm
stainless
steel
105.00
034.426
Ø 3.5 mm,
length 36.0 mm
stainless
steel
105.00
034.429
Ø 3.5 mm,
length 40.0 mm
stainless
steel
105.00
034.623
Ø 4.2 mm,
length 32.0 mm
stainless
steel
105.00
034.626
Ø 4.2 mm,
length 36.0 mm
stainless
steel
105.00
034.629
Ø 4.2 mm,
length 40.0 mm
stainless
steel
105.00
Important
040.454S–040.457S).
For more information on Straumann‘s Instruments for Guided Surgery, please refer to the brochure “Basic Information on Straumann
Guided Surgery” (USLIT 261).
48
Art. No.
Article
Dimensions
Material
Price $
034.235
SP Profile drill, guided
Ø 3.3 mm, RN,
length 35.0 mm
stainless
steel
220.00
034.435
SP Profile drill, guided
Ø 4.1 mm, RN,
length 35.0 mm
stainless
steel
220.00
034.237
TE Profile drill, guided
Ø 3.3 mm, RN,
length 37.0 mm
stainless
steel
220.00
034.437
TE Profile drill, guided
Ø 4.1 mm, RN,
length 37.0 mm
stainless
steel
220.00
026.2503
BL Profile drill, guided
Ø 3.3 mm,
length 37.0 mm
stainless
steel
220.00
026.4503
Ø 4.1 mm,
length 37.0 mm
stainless
steel
220.00
026.6503
Ø 4.8 mm,
length 37.0 mm
stainless
steel
220.00
034.245
S/SP Tap for handpiece, guided
Ø 3.3 mm,
length 42.0 mm
stainless
steel
220.00
034.445
Ø 4.1 mm,
length 42.0 mm
stainless
steel
220.00
034.645
Ø 4.8 mm,
length 42.0 mm
stainless
steel
220.00
026.2510
BL/TE Tap for handpiece, guided
Ø 3.3 mm,
length 42.0 mm
stainless
steel
220.00
026.4510
Ø 4.1 mm,
length 42.0 mm
stainless
steel
220.00
026.6510
Ø 4.8 mm,
length 42.0 mm
stainless
steel
220.00
Guided profile drills
SURGERY
Guided taps
Important
040.454S–040.457S).
49
Art. No.
Article
Dimensions
Material
Price $
034.010
Mucosa punch
Ø 3.4 mm, L 29 mm
stainless
steel
180.00
034.011
Mucosa punch
Ø 4.0 mm, L 29 mm
stainless
steel
180.00
034.012
Mucosa punch
Ø 4.7 mm, L 29 mm
stainless
steel
180.00
034.150
Drill handle
Ø 2.2 mm,
1.0 mm/3.0 mm stop
stainless
steel
275.00
034.250
Drill handle
Ø 2.8 mm,
1.0 mm/3.0 mm stop
stainless
steel
275.00
034.450
Drill handle
Ø 3.5 mm,
1.0 mm/3.0 mm stop
stainless
steel
275.00
034.650
Drill handle
Ø 4.2 mm,
1.0 mm/3.0 mm stop
stainless
steel
275.00
034.750
C-handle H2
stainless
steel
275.00
034.751
C-handle H4
stainless
steel
275.00
034.752
C-handle H6
stainless
steel
275.00
034.005
Connector for ratchet
stainless
steel
160.00
034.256
Template fixation pin, guided
Ø 2.8 mm/2.8 mm
stainless
steel
50.00
034.255
Ø 5.0 mm/2.8 mm
stainless
steel
50.00
034.455
Ø 5.0 mm/3.5 mm
stainless
steel
50.00
034.655
Ø 5.0 mm/4.2 mm
stainless
steel
50.00
034.006
Stop key for guided implants
stainless
steel
160.00
SURGERY
Auxiliary parts
Important
040.454S–040.457S).
50
Art. No.
Article
Dimensions
Material
Price $
034.050V4
Sleeve
Ø 5.0 mm,
height 5.0 mm
stainless
steel
90.00
034.052V4
Sleeve
Ø 2.8 mm,
height 6.0 mm
stainless
steel
90.00
034.053V4
T-sleeve
Ø 5.0 mm,
height 5.0 mm
stainless
steel
90.00
034.055V4
T-sleeve
Ø 2.8 mm,
height 6.0 mm
stainless
steel
90.00
Surgical cassette,
for Straumann Guided
Surgery (instruments not
included)
length 290.0 mm,
width 175.0 mm,
height 62.0 mm
plastic
Sleeves for Straumann ® Guided Surgery
034.001
525.00
SURGERY
Guided Surgery Cassette
Important
040.454S–040.457S).
51
For Standard and Standard Plus Implants, endosteal Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
SURGERY
Basic implant bed preparation for Standard and Standard Plus implants Ø 3.3 mm
044.022
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Pilot drill 1, short
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
with distance indicator
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
Final implant bed preparation for Standard Plus implants Ø 3.3 mm
044.086
SP Profile drill, short
Ø 2.8 mm, RN,
length 25.0 mm
stainless steel
200.00
044.087
SP Profile drill, long
Ø 2.8 mm, RN,
length 34.0 mm
stainless steel
200.00
SP Profile drills are used for preparing the shoulder configuration of Standard Plus implants in the bone.
Important: Do not use SP Profile drills with Standard Plus implants Ø 3.3 mm, NN, or with Standard Plus implants Ø 4.8 mm, RN.
Final implant bed preparation for Standard and Standard Plus implants Ø 3.3 mm
044.590
S/SP Tap for ratchet,
short
Ø 3.3 mm,
length 30.0 mm
stainless steel
200.00
044.591
long
Ø 3.3 mm,
length 34.0 mm
stainless steel
200.00
044.575
S/SP Tap for adapter
Ø 3.3 mm,
length 23.0 mm
stainless steel/
PEEK
200.00
S/SP Taps are used for pretapping the implant bed for Standard and Standard Plus implants.
Important: For S and SP Ø 3.3 mm implants, pretapping is recommended in dense bone (class* 1 and 2).
* Class 1: hardest bone/Class 4: softest bone
52
Art. No.
Article
Dimensions
Material
Price $
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Twist drill PRO, short
Ø 3.5 mm,
length 33.0 mm
stainless steel
95.00
044.251
Twist drill PRO, long
Ø 3.5 mm,
length 41.0 mm
stainless steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
SURGERY
044.022
044.088
Ø 3.5 mm, RN,
length 25.0 mm
stainless steel
200.00
044.089
Ø 3.5 mm, RN,
length 34.0 mm
stainless steel
200.00
Important: Do not use SP Profile drills with Standard Plus Implants Ø 3.3 mm, NN, or with Standard Plus Implants Ø 4.8 mm, RN.
044.592
short
Ø 4.1 mm,
length 30.0 mm
stainless steel
200.00
044.593
long
Ø 4.1 mm,
length 34.0 mm
stainless steel
200.00
044.577
Ø 4.1 mm,
length 23.0 mm
stainless steel/
PEEK
200.00
Important: For S and SP Ø 4.1 mm implants, pretapping is recommended in dense bone (class* 1 and 2).
53
Art. No.
Article
Dimensions
Material
Price $
SURGERY
044.022
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Ø 3.5 mm,
length 33.0 mm
stainless steel
95.00
044.251
Ø 3.5 mm,
length 41.0 mm
stainless steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
044.254
Twist drill Pro, short
Ø 4.2 mm,
length 33.0 mm
stainless steel
95.00
044.255
Twist drill Pro, long
Ø 4.2 mm,
length 41.0 mm
stainless steel
95.00
046.451
Depth gauge
Ø 4.2 mm,
length 26.0 mm
titanium
45.00
044.084
Ø 4.2 mm, WN,
length 25.0 mm
stainless steel
200.00
044.085
Ø 4.2 mm, WN,
length 34.0 mm
stainless steel
200.00
Important: Do not use SP Profile drills with Standard Plus Implants Ø 3.3 mm, NN, or with Standard Plus Implants Ø 4.8 mm, RN.
044.594
short
Ø 4.8 mm,
length 30.0 mm
stainless steel
200.00
044.595
long
Ø 4.8 mm,
length 34.0 mm
stainless steel
200.00
044.579
Ø 4.8 mm,
length 23.0 mm
stainless steel/
PEEK
200.00
Important: For S and SP Ø 4.8 mm implants, pretapping is recommended over the full depth in all bone classes.
54
For Tapered Effect Implants, endosteal Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
Basic implant bed preparation for Tapered Effect implants Ø 3.3 mm
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
SURGERY
044.022
Final implant bed preparation for Tapered Effect implants Ø 3.3 mm
044.701
TE Profile drill, short
Ø 2.8 mm, RN,
length 28.0 mm
stainless steel
200.00
044.708
TE Profile drill, long
Ø 2.8 mm, RN,
length 37.0 mm
stainless steel
200.00
TE Profile drills are used for preparing the implant bed for the coronal conical core of Tapered Effect implants.
Important: To be used in all bone classes.
Final implant bed preparation for Bone Level and Tapered Effect implants Ø 3.3 mm
026.2310
BL/TE Tap for adapter
Ø 3.3 mm,
length 23.0 mm
stainless
steel/PEEK
200.00
BL/TE Taps are used for pretapping the implant bed for Bone Level and Tapered Effect implants.
Important: For TE Ø 3.3 mm implants, pretapping is recommended over the full depth in bone class* 1 and 2.
55
Art. No.
Article
Dimensions
Material
Price $
SURGERY
044.022
Round bur
Ø 1.4 mm
stainless
steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless
steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless
steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless
steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless
steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless
steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless
steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Ø 3.5 mm,
length 33.0 mm
stainless
steel
95.00
044.251
Ø 3.5 mm,
length 41.0 mm
stainless
steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
044.705
Ø 3.5 mm, RN,
length 28.0 mm
stainless
steel
200.00
044.712
Ø 3.5 mm, RN,
length 37.0 mm
stainless
steel
200.00
026.4310
Ø 4.1 mm,
length 23.0 mm
stainless
steel/PEEK
Important: For TE Ø 4.1 mm implants, pretapping is recommended over the full depth in bone class* 1 and 2.
56
200.00
Art. No.
Article
Dimensions
Material
Price $
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Ø 3.5 mm,
length 33.0 mm
stainless steel
95.00
044.251
Ø 3.5 mm,
length 41.0 mm
stainless steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
044.254
Ø 4.2 mm,
length 33.0 mm
stainless steel
95.00
044.255
Ø 4.2 mm,
length 41.0 mm
stainless steel
95.00
046.451
Depth gauge
Ø 4.2 mm,
length 26.0 mm
titanium
45.00
SURGERY
044.022
044.703
Ø 4.2 mm, WN,
length 28.0 mm
stainless steel
200.00
044.710
Ø 4.2 mm, WN,
length 37.0 mm
stainless steel
200.00
026.6310
Ø 4.8 mm,
length 23.0 mm
stainless
steel/PEEK
200.00
Important: For TE Ø 4.8 mm implants pretapping is recommended over the full depth in all bone classes.
57
For Bone Level Implants, endosteal Ø 3.3 mm
Art. No.
Article
Dimensions
Material
Price $
SURGERY
Basic implant bed preparation for Bone Level implants Ø 3.3 mm
044.022
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
Final implant bed preparation for Bone Level implants Ø 3.3 mm
026.2303
BL Profile drill, short
Ø 3.3 mm,
length 26.0 mm
stainless steel
200.00
026.2306
BL Profile drill, long
Ø 3.3 mm,
length 35.0 mm
stainless steel
200.00
BL Profile drills are used for preparing the implant bed for the coronal conical core of Bone Level implants.
026.2310
Ø 3.3 mm,
length 23.0 mm
stainless steel/
PEEK
Important: For BL Ø 3.3 mm implants, pretapping is recommended over the full depth in bone class* 1 and 2.
58
200.00
Art. No.
Article
Dimensions
Material
Price $
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Ø 3.5 mm,
length 33.0 mm
stainless steel
95.00
044.251
Ø 3.5 mm,
length 41.0 mm
stainless steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
SURGERY
044.022
026.4303
Ø 4.1 mm,
length 26.0 mm
stainless steel
200.00
026.4306
Ø 4.1 mm,
length 35.0 mm
stainless steel
200.00
026.4310
Ø 4.1 mm,
length 23.0 mm
stainless steel/
PEEK
200.00
Important: For BL Ø 4.1 mm implants, pretapping is recommended over the full depth in bone class* 1 and 2.
59
Art. No.
Article
Dimensions
Material
Price $
SURGERY
044.022
Round bur
Ø 1.4 mm
stainless steel
35.00
044.003
Round bur
Ø 2.3 mm
stainless steel
35.00
044.004
Round bur
Ø 3.1 mm
stainless steel
35.00
044.210
Ø 2.2 mm,
length 33.0 mm
stainless steel
85.00
044.211
Pilot drill 1, long
Ø 2.2 mm,
length 41.0 mm
stainless steel
85.00
046.458
Alignment pin
Ø 2.2 mm,
length 28.0 mm
titanium
45.00
044.214
Ø 2.8 mm,
length 33.0 mm
stainless steel
85.00
044.215
Pilot drill 2, long
Ø 2.8 mm,
length 41.0 mm
stainless steel
85.00
046.455
Depth gauge,
Ø 2.2/2.8 mm,
length 27.0 mm
titanium
45.00
044.250
Ø 3.5 mm,
length 33.0 mm
stainless steel
95.00
044.251
Ø 3.5 mm,
length 41.0 mm
stainless steel
95.00
046.450
Depth gauge
Ø 3.5 mm,
length 26.0 mm
titanium
45.00
044.254
Twist drill Pro, short
Ø 4.2 mm,
length 33.0 mm
stainless steel
95.00
044.255
Twist drill Pro, long
Ø 4.2 mm,
length 41.0 mm
stainless steel
95.00
046.451
Depth gauge
Ø 4.2 mm,
length 26.0 mm
titanium
45.00
026.6303
Ø 4.8 mm,
length 26.0 mm
stainless steel
200.00
026.6306
Ø 4.8 mm,
length 35.0 mm
stainless steel
200.00
026.6310
Ø 4.8 mm,
length 23.0 mm
stainless steel/
PEEK
Important: For BL Ø 4.8 mm implants pretapping is recommended over the full depth for all bone classes.
60
200.00
surgical Instruments
For Straumann® Standard, Standard Plus and Tapered Effect Implants / Bone Profile Drills
Art. No.
Article
Dimensions
Material
Price $
044.304
RN Bone profile drill,
for use with 049.082
inside Ø 3.6 mm/
4.8 mm
outside Ø 5.4 mm
length 28.0 mm
stainless steel
195.00
044.305
WN Bone profile drill,
for use with 049.082
inside Ø 3.6 mm/
6.5 mm
outside Ø 7.2 mm
length 25.0 mm
stainless steel
195.00
049.082*
SCS Guiding cylinder,
for use with RN and WN
bone profile drills
Ø 3.6 mm
length 10.5 mm
stainless steel
40.00
SURGERY
Important
Bone profile drills cannot be used for Straumann ® Bone Level implants.
*The SCS Guiding cylinder is intended for single use only.
61
SURGERY
62
Art. No.
Article
Dimensions
Material
Price $
046.110
Instrument tweezers
length 140.0 mm
stainless steel
65.00
046.095
Tweezers with titanium
plasma-coated tips
length 115.0 mm
stainless steel/
titanium
55.00
046.057
Tweezers without titanium
plasma-coated tips
length 115.0 mm
stainless steel
28.00
046.119
Ratchet, includes service instrument length 84.0 mm
stainless steel
165.00
046.108
Service instrument for ratchet
length 50.0 mm
stainless steel
23.00
045.111V4
Cleaning brush for ratchet
length 100.0 mm, stainless steel/
Ø 4.5 mm
nylon
15.00
046.049
Torque control device for ratchet
length 82.0 mm
stainless steel
145.00
046.064
Holding key
length 85.0 mm
stainless steel
60.00
046.460
Adapter for ratchet, extra short
length 11.0 mm
stainless steel
100.00
046.461
Adapter for ratchet, short
length 18.0 mm
stainless steel
100.00
046.462
Adapter for ratchet, long
length 28.0 mm
stainless steel
100.00
046.470
Adapter for handpiece, extra short
length 19.0 mm
stainless steel
100.00
046.471
Adapter for handpiece, short
length 26.0 mm
stainless steel
100.00
046.472
Adapter for handpiece, long
length 34.0 mm
stainless steel
100.00
Art. No.
Article
Dimensions
Material
Price $
046.400
SCS Screwdriver for ratchet,
extra short
length 15.0 mm
stainless steel
60.00
046.401
short
length 21.0 mm
stainless steel
60.00
046.402
long
length 27.0 mm
stainless steel
60.00
046.410
SCS Screwdriver for
handpiece, extra short
length 20.0 mm
stainless steel
40.00
046.411
SCS Screwdriver for
handpiece, short
length 26.0 mm
stainless steel
40.00
046.412
SCS Screwdriver for
handpiece, long
length 32.0 mm
stainless steel
40.00
046.421
Hexagonal screwdriver
(use only with 048.374)
length 30.0 mm
stainless steel
50.00
045.921
Light curette for implants
(5 per pack)*
Screwdrivers
SURGERY
80.00
*Manufacturer
Kerr Hawe SA
Zona Strecce
CH-6934 Bioggio/Switzerland
The SCS screwdrivers also act as inserting instruments for the WN Solid
abutments, for all synOcta ® abutments, for all CrossFit ® prosthetic components
as well as for all closure screws and healing caps in the Straumann ® Dental
Implant System.
63
Surgical Cassette
Article
Dimensions
Material
Price $
040.165
Straumann ® surgical cassette,
includes screw container
041.047, without instruments
length 290.0 mm,
width 175.0 mm,
height 62.0 mm
plastic
525.00
041.047
Screw container, with lid,
for Straumann surgical cassette,
without screws
length 69.0 mm,
width 47.0 mm,
height 29.0 mm
plastic
150.00
026.0991
Grommets for Straumann surgical
cassette, for Bone Level implant
instruments, contains 12
SURGERY
Art. No.
silicone
1.00
Ultrasonic Cleaning Cassette
Art. No.
Article
Dimensions
Material
040.175
Ultrasonic cleaning cassette
150.0 x 65.0 x
25.0 mm
plastic/
silicone
Art. No.
Article
Dimensions
Material
041.500
Storage system for implants
(SLA®/SLActive ®) incl. drawers
and dividers. Holds up to 48
Straumann dental implants.
226.0 x 280.0 x
248.0 mm
polymer
90.00
Storage System
64
325.00
Surgical Kits
It is recommended that Straumann drills be replaced after 10 surgeries. For your convenience, the following replacement
drill kits are available:
Basic replacement drill kit - PRO
044.022Round bur, Ø 1.4 mm
35.00
044.210
Pilot drill, Ø 2.2 mm, short 85.00
044.211
Pilot drill, Ø 2.2 mm, long 85.00
044.214
044.215
044.250
Twist drill PRO, Ø 3.5 mm, short 95.00
044.251
Twist drill PRO, Ø 3.5 mm, long 95.00
List price
565.00
USK-BD-PRO
Basic replacement drill kit - PRO
Comprehensive replacement drill kit - PRO
SURGERY
044.022Round bur, Ø 1.4 mm
35.00
044.210
044.211
044.214
044.215
044.250
Twist drill PRO, Ø 3.5 mm, short 95.00
044.251
Twist drill PRO, Ø 3.5 mm, long 95.00
044.254
Twist drill PRO, Ø 4.2 mm, short
95.00
044.255
Twist drill PRO, Ø 4.2 mm, long
95.00
List price
755.00
USK-CD-PRO
Comprehensive replacement drill kit - PRO
Profile drill replacement kit for Standard Plus implants
044.086
044.087
044.088
044.089
044.084
044.085 SP
SP
SP
SP
SP
SP
Profile
Profile
Profile
Profile
Profile
Profile
drill,
drill,
drill,
drill,
drill,
drill,
Ø
Ø
Ø
Ø
Ø
Ø
2.8
2.8
3.5
3.5
4.2
4.2
mm,
mm,
mm,
mm,
mm,
mm,
short
200.00
long
200.00
short
200.00
long
200.00
short
200.00
long
200.00
List price
1,200.00
USK-PD
SP Profile drill replacement kit
Profile drill replacement kit for Tapered Effect implants
044.701
044.708
044.705
044.712
044.703
044.710
TE
TE
TE
TE
TE
TE
Profile
Profile
Profile
Profile
Profile
Profile
drill,
drill,
drill,
drill,
drill,
drill,
Ø
Ø
Ø
Ø
Ø
Ø
2.8
2.8
3.5
3.5
4.2
4.2
mm,
mm,
mm,
mm,
mm,
mm,
short
long
short
long
short
long
200.00
200.00
200.00
200.00
200.00
200.00
List price
1,200.00
USK-TE
TE Profile drill replacement kit
Profile drill replacement kit for Bone Level implants
026.2303
026.2306
026.4303
026.4306
026.6303
026.6306
BL
BL
BL
BL
BL
BL
Profile
Profile
Profile
Profile
Profile
Profile
drill
drill
drill
drill
drill
drill
Ø
Ø
Ø
Ø
Ø
Ø
3.3 mm, short
200.00
3.3 mm, long
200.00
4.1 mm, short
200.00
4.1 mm, long
200.00
4.8 mm, short
200.00
4.8 mm, long
200.00
List price
1,200.00
USK-BLI
Profile drill replacement kit for Bone Level implants 65
Surgical Kits
Comprehensive Surgical Instrument Kit for Ratchet
SURGERY
This instrument kit contains the surgical instruments needed by the trained dental professional to perform the surgical
procedures recommended for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Tissue Level and Bone Level implants utilizing
instruments for the ratchet.
66
040.165
044.022
044.003
044.004
044.210
044.211
044.214
044.215
044.250
044.251
044.254
044.255
044.086
044.087
044.088
044.089
044.084
044.085
044.701
044.708
044.705
044.712
044.703
044.710
026.2303
026.2306
026.4303
026.4306
026.6303
026.6306
046.458
046.455
046.450
046.451
044.590
044.591
044.592
044.593
044.594
044.595
026.2310
026.4310
026.6310
046.460
046.461
044.304
044.305
049.082
046.147
046.148
026.0901
046.095
046.064
046.119
046.049
046.400
046.401
045.111V4
040.175
143.052
149.100
US060011
Straumann surgical cassette
Round bur, Ø 1.4 mm
Pilot drill, Ø 2.2 mm, short
Pilot drill, Ø 2.2 mm, long
SP Profile drill, RN, Ø 2.8 mm, short
SP Profile drill, RN, Ø 2.8 mm, long
SP Profile drill, WN, Ø 4.2 mm, short
SP Profile drill, WN, Ø 4.2 mm, long
TE Profile drill, Ø 2.8 mm RN, short
TE Profile drill, Ø 2.8 mm RN, long
TE Profile drill, Ø 4.2 mm WN, short
TE Profile drill, Ø 4.2 mm WN, long
BL Profile drill, Ø 3.3 mm, short
BL Profile drill, Ø 3.3 mm, long
Alignment Pin, straight (kit includes 2)
Depth gauge with distance indicator, Ø 2.2/2.8 mm (kit includes 2)
Depth gauge, Ø 3.5 mm (kit includes 2)
Tap for ratchet, Ø 3.3 mm, short
Tap for ratchet, Ø 3.3 mm, long
BL/TE Tap, Ø 3.3 mm
RN Bone profile drill
WN Bone profile drill
SCS Guiding cylinder
Diagnostic T, L 65,0 mm, W 33.0 mm, Ti
Implant distance indicator
BL Implant distance indicator
Tweezers with titanium, plasma coated tips
Holding key
Ratchet, L 84.0 mm, stainless steel
SCS Screwdriver for ratchet, extra short
SCS Screwdriver for ratchet, short
Brush for cleaning ratchet
Demo Standard Plus implant Ø 4.1 mm, RN Sterile ampoule standard
ITI Comprehensive Manual
USK32-1
Kit Price
525.00
35.00
35.00
35.00
85.00
85.00
85.00
85.00
95.00
95.00
95.00
95.00
200.00
200.00
200.00 200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
90.00
90.00
90.00
90.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
100.00
100.00
195.00
195.00
40.00
40.00
125.00
125.00
55.00
60.00
165.00
145.00
60.00
60.00
15.00
90.00
25.00
10.00
0.00
$8,715.00
Surgical Kits
Comprehensive Surgical Instrument Kit for Handpiece
procedures recommended for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Tissue Level and Bone Level implants
utilizing instruments for the handpiece.
525.00
35.00
35.00
35.00
85.00
85.00
85.00
85.00
95.00
95.00
95.00
95.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
Alignment pin, straight (kit includes 2) 90.00
90.00
90.00
90.00
Tap for handpiece, Ø 3.3 mm
200.00
200.00
200.00
200.00
200.00
200.00
100.00
100.00
100.00
100.00
RN Bone profile drill 195.00
WN Bone profile drill 195.00
40.00
Diagnostic T, L 65,0 mm, W 33.0 mm, Ti
40.00
125.00
125.00
55.00
Holding key
60.00
165.00
145.00
60.00
60.00
SCS Screwdriver for handpiece, extra short
40.00
SCS Screwdriver for handpiece, short
40.00
Brush for cleaning ratchet
15.00
Grommets for BL instruments
1.00
90.00
Demo Standard Plus implant Ø 4.1 mm, RN
25.00
Sterile ampoule standard
10.00
ITI Comprehensive Manual
0.00
USK32A-1
Kit Price
8,396.00
SURGERY
040.165
044.022
044.003
044.004
044.210
044.211
044.214
044.215
044.250
044.251
044.254
044.255
044.086
044.087
044.088
044.089
044.084
044.085
044.701
044.708
044.705
044.712
044.703
044.710
026.2303
026.2306
026.4303
026.4306
026.6303
026.6306
046.458
046.455
046.450
046.451
044.575
044.577
044.579
026.2310
026.4310
026.6310
046.460
046.461
046.470
046.471
044.304
044.305
049.082
046.147
046.148
026.0901
046.095
046.064
046.119
046.049
046.400
046.401
046.410
046.411
045.111V4
026.0991
040.175
143.052
149.100
US060011
67
Surgical Kits
Tissue Level Starter Surgical Instrument Kit for Ratchet
SURGERY
procedures recommended for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Tissue Level implants only utilizing
instruments for the ratchet.
68
040.165
044.022
044.003
044.004
044.210
044.211
044.214
044.215
044.250
044.251
044.254
044.255
044.086
044.087
044.088
044.089
044.084
044.085
044.701
044.708
044.705
044.712
044.703
044.710
046.458
046.455
046.450
046.451
044.590
044.591
044.592
044.593
044.594
044.595
026.2310
026.4310
026.6310
046.460
046.461
044.304
044.305
049.082
046.064
046.119
046.049
046.400
046.401
525.00
35.00
35.00
35.00
85.00
85.00
85.00
85.00
95.00
95.00
95.00
95.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
90.00
90.00
90.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
100.00
100.00
195.00
195.00
40.00
Holding key
60.00
165.00
145.00
60.00
60.00
USK33-1
Kit Price
7,030.00
Surgical Kits
Tissue Level Starter Surgical Instrument Kit for Handpiece
procedures recommended for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Tissue Level implants only utilizing
instruments for the handpiece.
525.00
35.00
35.00
35.00
85.00
85.00
85.00
85.00
95.00
95.00
95.00
95.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
90.00
90.00
90.00
200.00
200.00
200.00
200.00
200.00
200.00
100.00
100.00
100.00
100.00
195.00
195.00
40.00
Holding key
60.00
165.00
145.00
60.00
60.00
SCS Screwdriver for handpiece, extra short
40.00
40.00
USK33A-1
Kit Price
SURGERY
040.165
044.022
044.003
044.004
044.210
044.211
044.214
044.215
044.250
044.251
044.254
044.255
044.086
044.087
044.088
044.089
044.084
044.085
044.701
044.708
044.705
044.712
044.703
044.710
046.458
046.455
046.450
046.451
044.575
044.577
044.579
026.2310
026.4310
026.6310
046.460
046.461
046.470
046.471
044.304
044.305
049.082
046.064
046.119
046.049
046.400
046.401
046.410
046.411
6,710.00
69
Surgical Kits
Bone Level Starter Surgical Instrument Kit
SURGERY
procedures recommended for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Bone Level implants only.
70
040.165
026.0991
044.022
044.003
044.004
044.210
044.211
044.214
044.215
044.250
044.251
044.254
044.255
026.2303
026.2306
026.4303
026.4306
026.6303
026.6306
046.458
046.455
046.450
046.451
026.2310
026.4310
026.6310
046.460
046.461
046.064
046.119
046.049
046.400
046.401
046.470
046.471
Grommets for BL instruments
Alignment pin, straight (kit includes 2)
Holding key
USK33B-1
Kit Price
525.00
1.00
35.00
35.00
35.00
85.00
85.00
85.00
85.00
95.00
95.00
95.00
95.00
200.00
200.00
200.00
200.00
200.00
200.00
90.00
90.00
90.00
90.00
200.00
200.00
200.00
100.00
100.00
60.00
165.00
145.00
60.00
60.00
100.00
100.00
4,401.00
Surgical Kits
Modular Kits to Complete Starter Surgical Instrument Kits
Bone Level Modular Kit to Complete Tissue Level Starter Surgical Instrument Kit
This instrument kit contains the surgical instruments needed to complete the TL Starter Surgical Instrument Kit (USK33-1
or USK33A-1) with the instruments required to place Bone Level implants.
026.0991
Grommets for BL Instruments
026.2303
026.2306
026.4303
026.4306
026.6303
026.6306
USK34-1 Kit Price
1.00
200.00
200.00
200.00
200.00
200.00
200.00
$1,201.00
044.086
044.087
044.088
044.089
044.084
044.085
044.701
044.708
TE Profile drill Ø 2.8 mm RN, long
044.705
044.712
044.703
TE Profile drill Ø 4.2 mm WN, short
044.710
044.590
044.591
044.592
044.593
044.594
044.595
044.575
044.577
044.579
044.304
044.305
049.082
USK34A-1 Kit Price
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
195.00
195.00
40.00
SURGERY
Tissue Level Modular Kit to Complete Bone Level Starter Surgical Instrument Kit
This instrument kit contains the surgical instruments needed to complete the BL Starter Surgical Instrument Kit (USK33B-1)
with the instruments required to place Tissue Level implants.
$4,630.00
71
Surgical Kits
Comprehensive Instrument Kit for Guided Surgery
SURGERY
This instrument kit contains the surgical instruments needed by the trained dental professional to perform template-based guided
surgical procedures for the placement of Ø 3.3 mm, 4.1 mm, and 4.8 mm Tissue Level and Bone Level implants.
72
034.001
Cassette, for guided surgery
034.150
Drill handle Ø 2.2 mm, 1.0 mm/3.0 mm stop
034.250
034.450
034.650
034.215
Milling cutter, Ø 2.8 mm, 32.5 mm, guided
034.415
034.615
034.123
Pilot drill, Ø 2.2 mm, short, guided
034.126
Pilot drill, Ø 2.2 mm, long, guided
034.129
Pilot drill, Ø 2.2 mm, x-long, guided
034.223
Twist drill PRO, Ø 2.8 mm, short, guided
034.226
Twist drill PRO, Ø 2.8 mm, long, guided
034.229
Twist drill PRO, Ø 2.8 mm, x-long, guided
034.423
034.426
034.429
034.623
034.626
034.629
034.255
Template fix. pin, Ø 5.0/2.8 mm, 24.0 mm, guided (kit
034.256
034.455
034.655
034.750
C-handle H2, 89.0 mm, 6.0 mm stop height
034.751
034.752
034.235
SP Profile drill, Ø 3.3 mm, RN, 35.0 mm, guided
034.435
SP Profile drill, Ø 4.1 mm, RN, 35.0 mm, guided
034.237
TE Profile drill, Ø 3.3 mm, RN,37 mm, guided
034.437
TE Profile drill, Ø 4.1 mm, RN,37 mm, guided
026.2503
BL Profile drill, Ø 3.3 mm, 37.0 mm, guided
026.4503
026.6503
034.245
S/SP Tap for handp., Ø 3.3 mm, 42.0 mm, guided
034.645
034.445
026.2510
BL/TE Tap for handp., Ø 3.3 mm, 42.0 mm, guided
026.4510
026.6510
034.005
Connector for ratchet, L 14.0 mm
046.049
046.095
046.119
046.148
026.0901
046.401
046.411
046.461
046.471
046.064
Holding key
034.010*
Mucosa punch, Ø 3.4 mm, L 29 mm, stainless steel
034.011*
034.012*
034.006*
Stop key for guided implants
USKGS-C
Kit Price
*Mucosa punches and Stop key available as part of the Guided Surgery Instrument Kit as of March 1, 2011
includes
includes
includes
includes
2)
2)
2)
2)
525.00
275.00
275.00
275.00
275.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
105.00
100.00
100.00
100.00
100.00
275.00
275.00
275.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
220.00
160.00
145.00
55.00
165.00
125.00
125.00
60.00
40.00
100.00
100.00
60.00
180.00
180.00
180.00
160.00
$9,120.00
Osteotomes
For Bone Condensation
Art. No.
Article
Dimensions
Material
040.500
Osteotome instrument kit
for bone condensation,
kit contains 1 each of the
following:
046.500
Osteotome, straight,
for bone condensation
Ø 2.2 mm
stainless steel
125.00
046.501
Ø 2.8 mm
stainless steel
125.00
046.502
Ø 3.5 mm
stainless steel
125.00
046.503
Ø 4.2 mm
stainless steel
125.00
046.510
Osteotome, angled,
Ø 2.2 mm
stainless steel
125.00
046.511
Osteotome, angled,
Ø 2.8 mm
stainless steel
125.00
046.512
Osteotome, angled,
Ø 3.5 mm
stainless steel
125.00
046.513
Osteotome, angled,
Ø 4.2 mm
stainless steel
125.00
046.550*
Depth stop
Ø 2.2 mm
titanium/
stainless steel
55.00
046.551*
Depth stop
Ø 2.8 mm
titanium/
stainless steel
55.00
046.552*
Depth stop
Ø 3.5 mm
titanium/
stainless steel
55.00
046.553*
Depth stop
Ø 4.2 mm
titanium/
stainless steel
55.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
stainless steel/
plastic
Price $
1,300.00
SURGERY
The instruments and depth stops are also available individually.
* Includes SCS occlusal screw. For replacements order 048.350V4
73
Osteotomes
SURGERY
For Sinus Floor Elevation
Art. No.
Article
Dimensions
Material
040.501
Osteotome instrument kit
for partial sinus floor
elevation, kit contains
1 each of the following:
046.521
for sinus floor elevation
Ø 2.8 mm
stainless steel
125.00
046.522
Ø 3.5 mm
stainless steel
125.00
046.523
Ø 4.2 mm
stainless steel
125.00
046.531
Osteotome, angled,
Ø 2.8 mm
stainless steel
125.00
046.532
Osteotome, angled,
Ø 3.5 mm
stainless steel
125.00
046.533
Osteotome, angled,
Ø 4.2 mm
stainless steel
125.00
046.551*
Depth stop
Ø 2.8 mm
titanium/
stainless steel
55.00
046.552*
Depth stop
Ø 3.5 mm
titanium/
stainless steel
55.00
046.553*
Depth stop
Ø 4.2 mm
titanium/
stainless steel
55.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
stainless steel/
plastic
The instruments and depth stops are also available individually.
* Includes SCS occlusal screw. For replacements order 048.350V4
74
Price $
1,000.00
Explantation
Explantation Drills
Article
Dimensions
Material
Price $
044.330
Explantation drill, short,
for Straumann dental implants
Ø 3.3 mm and Ø 3.5 mm
inside Ø 3.6 mm,
outside Ø 4.2 mm,
length 32 mm
stainless steel
200.00
044.331
Explantation drill, medium,
inside Ø 3.6 mm,
outside Ø 4.2 mm,
length 37.5 mm
stainless steel
200.00
044.332
Explantation drill, long,
inside Ø 3.6 mm,
outside Ø 4.2 mm,
length 40.5 mm
stainless steel
200.00
044.340
Ø 4.1 mm
inside Ø 4.2 mm,
outside Ø 4.8 mm,
length 32.0 mm
stainless steel
200.00
044.341
Ø 4.1 mm
inside Ø 4.2 mm,
outside Ø 4.8 mm,
length 37.5 mm
stainless steel
200.00
044.342
Ø 4.1 mm
inside Ø 4.2 mm,
outside Ø 4.8 mm,
length 40.5 mm
stainless steel
200.00
044.344
Ø 4.8 mm
inside Ø 4.9 mm,
outside Ø 5.5 mm,
length 32.0 mm
stainless steel
200.00
044.345
Ø 4.8 mm
inside Ø 4.9 mm,
outside Ø 5.5 mm,
length 37.5 mm
stainless steel
200.00
044.346
Ø 4.8 mm
inside Ø 4.9 mm,
outside Ø 5.5 mm,
length 40.5 mm
stainless steel
200.00
SURGERY
Art. No.
Important
Explantation drills are intended for single use only.
75
Explantation
Explantation Aids
Art. No.
Article
Dimensions
Material
Price $
SURGERY
Explantation of S/SP/TE implants without abutment
049.082
Ø 3.3 mm and Ø 3.5 mm Regular Neck
Ø 3.6 mm
length 10.5 mm
stainless steel
40.00
049.083
Ø 4.1 mm Regular Neck
Ø 4.2 mm
length 10.5 mm
stainless steel
40.00
049.167
Ø 4.8 mm Wide Neck
Ø 4.9 mm,
length 10.5 mm
stainless steel
40.00
049.182
Ø 3.3 mm Narrow Neck
Ø 3.6 mm,
length 5.0 mm
titanium/
stainless steel
40.00
Explantation of BL implants without abutment
026.2801
NC Guiding cylinder,
for explantation of Ø 3.3 mm
Bone Level implants
Ø 3.6 mm,
length 10.7 mm
stainless steel
40.00
026.4801
RC Guiding cylinder,
Bone Level implants
Ø 4.2 mm,
length 10.9 mm
stainless steel
40.00
026.6801
RC Guiding cylinder,
Bone Level implants
Ø 4.9 mm,
length 10.9 mm
stainless steel
40.00
Explantation of S/SP/TE implants with abutment
049.071
RN Guiding sleeve for
Straumann dental implants,
Ø 4.1 mm and Ø 3.5 mm,
cement and screw-retained
Ø 4.2 mm,
length 5.6 mm
stainless steel
40.00
049.850
Ø 3.3 mm, cement and
screw-retained
Ø 3.6 mm,
length 4.5 mm
stainless steel
40.00
049.851
Ø 4.8 mm, cement and
screw-retained
Ø 4.9 mm,
length 6.4 mm
stainless steel
40.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
049.181
SCS Occlusal screw, long,
for screw-retaining of 049.071,
049.850 and 049.851 on
an octa or cone abutment 15°
length 7.6 mm
titanium alloy
29.00
Important
The explantation aids are intended for single use only.
76
Third Party Products
W&H Drilling Units
Art. No.
Article
ElcoMED SA-310
Price $
One operating stage for all necessary parameters
Short and light brushless 300-50,000 rpm motor
Up to 80 Ncm on the rotary instrument
Automatic thread cutter function
Complete documentation via USB stick, .csv and .bmp format
6 individually adjustable programs (speed, torque, irrigation volume, gear ratio)
Self-evaluating electronic drive technology
USK310_L
ElcoMED SA-310 Drilling Kit with LED contra-angle
10,189.00
Kit includes:
US15933100ElcoMED SA-310 complete surgical unit
US10207560
WI-75 LED G contra-angle 20:1
US436360***
Irrigation tubing complete, disposable 2.2 mm, (3-pack)
US02139800*Drill Gauge
US02038200Service oil spray cap
US10940011**W&H service oil
SURGERY
USK310
ElcoMED SA-310 Drilling Kit
9,332.00
Kit includes:
US15933100ElcoMED SA-310 complete surgical unit
US10207550WI-75E/KM contra-angle 20:1
US436360***
Irrigation tubing complete, disposable 2.2 mm, (3-pack)
US02139800*Drill Gauge
US02038200Service oil spray cap
US10940011**W&H service oil
ImplantMED SI-915
Simple operation
High performance and torque, 70W, 5.5 Ncm
Precise torque limitation control: 5-70 Ncm
Wide speed range of 300-40,000 rpm on the motor
5 programs for various stages of implantology
Features an automatic thread cutter function with 5 preset torque values
USK915
ImplantMED Drilling Kit Kit Includes:
16929001
ImplantMEDSI-915 motor
10207550
436360***
02139800*
10940011**
02038200*
WI-75E/KM contra angle 20:1
Irrigation tubing complete, disposable 2.2mm, (3-pack)
Drill Gauge
MD-400 Service Oil F1
Service oil spray cap
USK915_LED
ImplantMED Drilling Kit with LED contra-angle Kit Includes:
ImplantMEDSI-915 motor
16929001
10207560
436360***
02139800*
10940011**
02038200*
5,471.00
6,328.00
WI-75 LED G contra angle 20:1
Irrigation tubing complete, disposable 2.2mm, (3-pack)
Drill Gauge
Service oil spray cap
* Items also sold separately, see page 78
** Service oil is shipped separately by ground delivery
*** Start-up tubing set – for re-orders use item number US04363600
77
W&H Accessories
Art. No.
Article
Price $
Complete disposable irrigation tubings
For ElcoMED SA-310, ImplantMED SI-915 and ImplantMED SI-95:
US04363600
Irrigation tubing complete with roller clamp and spike assembly, disposable 2.2 meters (6-pack) 81.00
For ElcoMED SA-200(C):
US04365300
Irrigation tubing complete with roller clamp and spike assembly, disposable 2.2 meters (6-pack) 81.00
SURGERY
Partly sterilizable irrigation tubings
Fits all models:
US00929300
US06338400
US06338500
US06338600
Irrigation tubing 2.2 meters disposable (10-pack)
Irrigation spike and roller assembly, sterilizable
Irrigation spike tubing only, sterilizable
Roller clamp, sterilizable
77.00
83.00
23.00
11.00
For ElcoMED SA-310, ImplantMED SI-915, and ImplantMED SI-95:
US04013900
Pump tubing with connectors, sterilizable
US04014000
Spare pump tubing – set of 3, sterilizable
39.00
19.00
For ElcoMED SA-200(C):
US04035100
Pump tubing with connectors, sterilizable
US04035200
Spare pump tubing – set of 3, sterilizable
45.00
25.00
Accessories for W&H drilling units
US10207550
WI-75E/KM contra angle (20:1; stainless steel)
US10207560
WI-75 LED G contra angle with LED light (20:1; stainless steel)
US00001100
S-11 straight handpiece (1:1; stainless steel)
US00001120
SI-11 LED G straight handpiece with LED light (1:1; stainless steel)
US04757100V3
Irrigation clips for WI-75 contra angle (3-pack)
US06016400
Y-Connector with tubing complete
US04541900
Trolley for W&H Unit
US04013600 Transportation Case
US10940011*
US02038200
Spray cap
US04019000
Cable clamps for tubing (set of 5)
*
1,338.00
2,195.00
1,242.00
2,055.00
87.00
49.00
1,098.00
361.00
60.00
10.00
22.00
Service oil is shipped by ground delivery
ElcoMEDTM and ImplantMEDTM are trademarks of W&H Burmoos Dentalwerk
Straumann is a proud distributor of W&H Merchandise. For technical questions about W&H products
and service, please contact W&H Impex at 800/265 6277.
Manufacturer
W&H Dentalwerk Bürmoos GmbH
Ignaz-Glaser-Str. 53
PO Box 1
A-5111 Bürmoos, Austria
t +43 6274 6236-0
f +43 6274 6236-55
[email protected]
http://wh.com
78
Art. No.
Article
US2131Nouvag® SEM kit
Price $
Kit price
4,134.00
This brushless motor system allows for maximum microsurgery versatility. The Nouvag SEM has both
a sterile internal and external irrigation. The keyboard panel is designed for easy handling, and
the high torque comes with a built-in torque controller and safety overload protection. All working
processes of implant surgery can be done by using only one contra angle (reduction 32:1).
Accessories for Nouvag SEM
277.00
13.00
15.00
62.00
13.00
9.00
SURGERY
US1031Suitcase for ambulant treatment
US1706One-way irrigation tubing, disposable
US1708Two-way irrigation tubing, disposable
US1984NOU-CLEAN service oil (without spray nozzle, US1958)
US1958
Spray nozzle to clean handpieces, contra angles
US1881
Large White Clips for Irrigation tubing (3 pack)
Nouvag ® is a registered trademark of Nouvag AG.
Manufacturer
Nouvag AG
Rosengartenstrasse 15 9400
Rorchacherberg
Switzerland
79
Osstell™ mentor Smartpegs™
Article
Price $
174.021V5
Smartpeg™ Type 4 for RN and WN
(delivered sterile, disposable)
135.00
174.020V5
Smartpeg™ Type 17 for NN
(delivered sterile, disposable)
135.00
174.156V5
Smartpeg™ Type 42 for RC (Bone Level,
delivered sterile, disposable)
135.00
174.155V5
Smartpeg™ Type 41 for NC (Bone Level,
delivered sterile, disposable)
135.00
SURGERY
Art. No.
Osstell™ and Smartpeg™ are trademarks of Osstell AB.
Manufacturer
Osstell AB
Gamlestadsvägen 3B
SE-415 02 Göteborg
Sweden
Important
Institut Straumann AG no longer distributes Osstell™ mentor instruments and
accessories. Please contact Osstell AB directly for orders. www.osstell.com
80
prosthetics
PROSTHETICS
Cassettes, Insets and Storage System
82
83
Prosthetics for Straumann ® Standard,
Standard Plus and Tapered Effect Implants
88
– CARES ® Prosthetics 89
– Crowns and Bridges – Narrow Neck Prosthetic System
91
– synOcta ® Prosthetic System
92
– Hybrid Dentures 104
– Crowns and Bridges – Solid Abutment Prosthetic System
116
Prosthetics for Straumann ® Bone Level Implants
122
– CARES ® Prosthetics
127
– Crowns and Bridges
128
– Hybrid Dentures
147
81
PROSTHETICS
Cassettes, Insets and Storage System
Art. No.
Article
Dimensions
Material
Price $
040.185
Prosthetic cassette for
instruments and auxiliary
components, complete
(but without dividers),
can be autoclaved
224.0 x 115.0 x 20.0 mm
anodized
aluminum
250.00
041.612
Divider, large, for dish
041.440
47.5 x 9.5 x 1.0 mm
anodized
aluminum
3.00
041.615
Divider, small, for dish
041.440
22.5 x 9.5 x 1.0 mm
anodized
aluminum
3.00
041.440
Dish for tray 041.211
56.0 x 31.0 x 11.0 mm
anodized
aluminum
5.00
041.412
Calibration cup, yellow
Ø 80.0 mm
anodized
aluminum
25.00
Plexiglass cassette/
Membranette, cannot
be sterilized
length 150.0 mm,
width 100.0 mm
plastic
16.00
Storage system for
prosthetics incl.
drawers and dividers
226.0 x 280.0 x 248.0 mm
polymer
Auxiliary part
140.055
Storage system
041.501
82
325.00
Article
Dimensions
Material
Price $
046.400
extra short
length 15.0 mm
stainless steel
60.00
046.401
short
length 21.0 mm
stainless steel
60.00
046.402
long
length 27.0 mm
stainless steel
60.00
046.067
Solid abutment driver for
RN Solid abutments, short
length 13.0 mm
stainless steel
150.00
046.068
RN Solid abutments, long
length 19.0 mm
stainless steel
150.00
046.069
Retentive anchor driver
length 19.0 mm
stainless steel
150.00
046.085
Screwdriver handle for
046.410/411/412
length 109.0 mm
stainless
steel/PEEK
30.00
046.410
SCS Screwdriver for
handpiece, extra short
length 20.0 mm
stainless steel
40.00
046.411
SCS Screwdriver for
handpiece, short
length 26.0 mm
stainless steel
40.00
046.412
SCS Screwdriver for
handpiece, long
length 32.0 mm
stainless steel
40.00
046.064
Holding key
length 85.0 mm
stainless steel
60.00
046.420
TS Hexagonal screwdriver
length 24.0 mm
stainless steel
50.00
046.421
Hexagonal screwdriver
for NN 048.374
length 30.0 mm
stainless steel
50.00
046.416
LOCATOR ® driver for ratchet,
short
length 15.0 mm
stainless steel
52.00
046.417
LOCATOR driver for ratchet,
long
length 21.0 mm
stainless steel
52.00
046.415
LOCATOR core tool
length 100.0 mm
stainless steel
88.00
048.199V4
LOCATOR parallel post
length 8.0 mm
LDPE
19.00
048.200
LOCATOR angle
measurement guide
length 5.0 mm,
width 15.0 mm
stainless steel
25.00
046.119
Ratchet, includes service
instrument
length 84.0 mm
stainless steel
165.00
046.108
Service instrument for ratchet
length 50.0 mm
stainless steel
23.00
The SCS screwdrivers also act as inserting instruments for the WN solid abutments,
for all synOcta® abutments, for all CrossFit ® prosthetic components as well as for all
closure screws and healing caps in the Straumann® Dental Implant System.
PROSTHETICS
Art. No.
83
PROSTHETICS
Art. No.
Article
Dimensions
Material
Price $
046.049
length 82.0 mm
stainless steel
145.00
046.154*
Screwdriver
length 37.0 mm
stainless steel
70.00
045.111V4
Cleaning brush for ratchet
length 100.0 mm,
Ø 4.5 mm
stainless
steel/nylon
15.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.243
Reamer for 45 ° shoulders
Ø 8.0 mm
stainless steel
TiN
90.00
046.242
Guide pin for reamer 046.243,
for RN Solid abutments
length 50.0 mm
stainless steel
35.00
046.244
for WN Solid abutments
length 50.0 mm
stainless steel
35.00
046.246
synOcta® guide pin for reamer
046.243, for 048.662,
048.663
length 50.0 mm
stainless steel
35.00
046.241
synOcta ® guide pin for reamer
046.243
length 50.0 mm
stainless steel
35.00
046.247
synOcta ® guide pin for reamer
046.243, for 048.606
length 50.0 mm
stainless steel
35.00
* For use with elliptical matrix (Art. No. 048.456)
84
Prosthetic Kits
Basic prosthetic instrument kit
This basic prosthetic kit is for the trained dental professional and contains instruments for restorative procedures utilizing
Straumann prosthetic components.
040.185Prosthetic cassette 250.00
046.119Ratchet, includes service instrument 165.00
046.049
145.00
046.064Holding key 60.00
046.400
SCS screwdriver for ratchet, extra short
60.00
046.401
SCS screwdriver for ratchet, short
60.00
046.067Solid abutment driver, short 150.00
046.068Solid abutment driver, long 150.00
046.069Retentive anchor driver 150.00
88.00
046.415
LOCATOR ® tool
52.00
046.416
LOCATOR ® driver for ratchet, short
046.095
Tweezers with titanium plasma sprayed tips
55.00
046.147Diagnostic T
40.00
041.612Divider for dish, large
3.00
041.615Divider for dish, small (10)
3.00
List price 1,431.00
USP10-1Basic prosthetic kit
List price
USP20-1
Micro kit for abutment placement
165.00
145.00
60.00
60.00
150.00
88.00
52.00
PROSTHETICS
Micro kit for abutment placement
046.119Ratchet, includes service instrument
046.049Torque control device for ratchet
046.400
SCS screwdriver for ratchet, extra short
046.401SCS screwdriver for ratchet, short
046.068Solid abutment driver, long
046.415
LOCATOR ® tool
046.416
LOCATOR ® driver for ratchet, short
720.00
LOCATOR ® is manufactured by and is a registered trademark of Zest Anchors, Inc.
85
86
prosthetics
PROSTHETICS FOR STRAUMANN ® STANDARD, STANDARD PLUS AND TAPERED EFFECT IMPLANTS
PROSTHETICS
87
Prosthetic Planning Aids
Art. No.
Article
Material
Price $
Prosthetic planning kit, contents:
6x 0
48.920, 048.929, 048.921, 048.916,
048.923, 048.917, 048.918, 048.919,
048.922, 048.924, 048.925, 048.930,
048.931, 048.932, 048.933, 048.934,
048.926, 048.927, 048.928, 048.935,
048.936, 048.937
POM
165.00
048.920V4
RN synOcta ® PLAN abutment
POM
25.00
048.929V4
R N synOcta 1.5 PLAN abutment
POM
25.00
048.921V4
RN synOcta transversal PLAN abutment
POM
25.00
048.916V4
RN synOcta 15° angled PLAN abutment, type A, 5.7 mm
POM
25.00
048.917V4
RN synOcta 15° angled PLAN abutment, type B, 5.7 mm
POM
25.00
048.918V4
POM
25.00
048.919V4
POM
25.00
048.922V4
POM
25.00
048.923V4
POM
25.00
048.924V4
POM
25.00
048.925V4
POM
25.00
048.930V4
R N synOcta Cementable PLAN abutment
POM
25.00
048.931V4
WN synOcta 1.5 PLAN abutment
POM
25.00
048.932V4
WN synOcta Cementable PLAN abutment
POM
25.00
048.933V4
WN synOcta 15° angled PLAN abutment, type A
POM
25.00
048.934V4
WN synOcta 15° angled PLAN abutment, type B
POM
25.00
048.926V4
RN PLAN Solid abutment, 4.0 mm
POM
25.00
048.927V4
POM
25.00
048.928V4
POM
25.00
048.935V4
NN PLAN coping, 9.0 mm
POM
25.00
048.936V4
NN angled PLAN coping 15°
POM
25.00
048.937V4
NN angled PLAN coping 20°
POM
25.00
Prosthetic planning kit
048.901*
PROSTHETICS
PLAN abutments
Important
The tissue level prosthetic planning aids must not be used in the mouth because
they cannot be sterilized. They are intended for use on a master cast only.
* See inside cover of kit for final abutment article numbers.
88
Straumann ® CARES ® Prosthetics
Soft Tissue Level Custom-made Implant Prosthetics
Straumann® CARES® CADCAM offers you a range of implant-borne prosthetic solutions in order
to achieve high-quality dental implant restorations. Straumann CARES implant-borne elements are
designed for high reliability and predictability.
All implant-borne prosthetic solutions can be ordered via Straumann CARES Visual software.
Straumann CARES Abutments
For customized patient solutions
For cement-retained crowns and bridges via mesostructure
For screw-retained crowns (ceramic abutments only)
Available in two different materials:
titanium and ceramic
One-piece abutments
Characteristics
Customized shape and emergence profile
Control over cement gap
Straumann precision fit
Straumann CARES Screw-retained bars and bridges
For complex customized patient solutions
For screw-retained bridges
For screw-retained Dolder ® bars
In two different materials: titanium and cobalt-chromium alloy (coron®)
Characteristics
Direct connection to the implant, no additional abutment needed
High precision
Available for Soft Tissue Level
Process Description
1. For appropriate scanner and software compatibility
PROSTHETICS
please ask your local Straumann sales representative.
2. The model situation is scanned with the Straumann CARES Scan CS2 scanner.
3. The prosthetic part of the abutment is designed with Straumann CARES Visual.
4. The data generated is sent to the Straumann milling center via the Straumann CARES Visual
software or the Straumann CARES Webshop (for abutments only − http://cares.straumann.com)
5. The customized abutment is manufactured at the Straumann milling center
6. Express delivery to the dental laboratory in just a few working days.
All final abutments are torqued into the implant at 35 Ncm.
89
PROSTHETICS
Straumann CARES ® Prosthetics
Art. No.
Article
Dimensions
Material
048.067
Straumann ® NN Scanbody,
includes fixation screw
length 9.2 mm
polymer
23.00
049.177*
NN Occlusal screw
length 5.0 mm
titanium alloy
29.00
048.068
Straumann ® RN Scanbody,
length 8.5 mm
polymer
23.00
048.087
048.087-04
NN Wax-up sleeve, for single use
length 15.0 mm
polymer
23.00
83.00
048.354*
RN Occlusal screw
(for ceramic only)
length 5.0 mm
titanium alloy
29.00
048.356*
synOcta ® basal screw,
for WN or RN
length 6.7 mm
titanium alloy
29.00
048.088
048.088-04
RN Wax-up sleeve, for single use
length 19.3 mm
polymer
23.00
83.00
048.069
Straumann ® WN Scanbody,
length 8.9 mm
polymer
23.00
048.089
048.089-04
WN Wax-up sleeve, for single use
length 16.4 mm
polymer
23.00
83.00
019.0063
Straumann ® CARES ® Wax-up kit
contains wax-up sleeve holders for
Straumann dental restorations on
Straumann implants
690.00
Coping materials for crown and bridge
zerion™
polycon® cast
ticon®
polycon® ae
Ceramic for prosthetic solutions
Titanium is used in many industries
coron®
Cobalt-Chromium (CoCr) is a
non-precious, low-cost alternative
3M™ ESPE™ Lava™ Ultimate
Comprised of nearly 80%
zirconia particles
90
Price $
Polycon/cast is a burn-out resin
Plastic polymethyl methacrylate (PMMA) product
IPS e.max® CAD
IPS Empress® CAD
Lithium-disilicate glass ceramic from Ivoclar Vivadent® AG
Leucite ceramic material from Ivoclar Vivadent® AG
Crowns and Bridges, Narrow Neck Ø 3.5 mm Prosthetic System
Art. No.
Article
Dimensions
Material
Price $
Impression taking and master cast fabrication
048.016
NN Impression cap with
integral guide screw
length 17.5 mm
aluminum/
titanium
49.00
048.122V4
NN Impression cap, snap-on
length 12.0 mm
plastic
80.00
048.043
NN Healing cap with integral
occlusal screw
height 3.4 mm
titanium/
titanium alloy
55.00
048.050
NN Protective cap with integral
occlusal screw
height 3.4 mm
polymer/
titanium alloy
55.00
048.130
NN Implant analog
length 14.0 mm
stainless
steel
32.00
NN Temporary coping,
includes NN Occlusal screw
height 10.0 mm
PEEK/
titanium alloy
65.00
048.500*
NN Framework blank,
can be trimmed, for the
direct application of
ceramic materials
height 9.0 mm,
alloy weight 0.92 g
Estheticor ®
Cosmor H †
195.00
048.635*
NN Gold coping, cast-on
height 10.0 mm,
alloy weight 0.28 g
Ceramicor ®††/
burn-out
plastic
200.00
048.505*
NN Coping,
can be trimmed
height 9.0 mm
titanium
85.00
048.550*
NN Coping,
15° a ngled
height 8.8 mm
titanium
160.00
048.551*
NN Coping,
20° a ngled
height 8.8 mm
titanium
160.00
049.177
NN Occlusal screw, yellow
length 5.0 mm,
thread Ø 1.8 mm
titanium alloy
Components for temporary restoration
048.669
Screw- and cement-retained restorations
PROSTHETICS
29.00
* NN Occlusal screw (049.177) must be purchased separately
*† Estheticor ® Cosmor H is a bonding, non-cast-on alloy for direct veneering with
ceramic.
††
Ceramicor ® is a non-oxidizing precious metal alloy for casting on precious
metal alloys.
Ceramicor ® and Estheticor ® are registered trademarks of
Cendres & Métaux SA, Biel-Bienne (Switzerland).
The NN Copings are torqued onto the implant at 35 Ncm.
91
Crowns and Bridges, syn O cta® Prosthetic System
(Regular Neck Ø 4.8 mm)
Impression Taking and Soft Tissue Management
Art. No.
Article
Dimensions
Material
Price $
048.017V4
RN Impression cap
height 8.0 mm
POM
36.00
048.070V4
RN synOcta positioning
cylinder, red
height 12.0 mm
POM
44.00
048.010
RN synOcta impression cap
with integral guide screw, red
height 10.1 mm
aluminum/
titanium
49.00
048.090
with built-in handle, red
height 21.0 mm
aluminum/
titanium
49.00
048.124
RN synOcta analog,
grey with red stripe
length 12.0 mm
stainless steel
32.00
048.940V4
Bite registration aid, short
Ø 5.0 mm,
height 8.0 mm
plastic
35.00
048.941V4
Bite registration aid, long
Ø 5.0 mm,
height 12.0 mm
plastic
35.00
048.668
RN synOcta temporary Meso
abutment, includes basal
screw*
height 10.0 mm PEEK/
titanium alloy
65.00
048.356
synOcta basal screw
length 6.7 mm
titanium alloy
29.00
048.651
RN synOcta post for temporary
restorations with integral guide
screw, crown
height 9.0 mm
titanium
65.00
048.650
RN synOcta post for temporary
restorations with integral guide
screw, bridge
height 9.0 mm
titanium
65.00
049.181
for 048.650/048.651 &
048.233/048.234
length 7.6 mm
titanium alloy
29.00
PROSTHETICS
Bite registration
Temporary restoration
* Basal screw available separately under Art. No. 048.356
Important
RN components can only be used with Straumann ® Standard, Standard Plus
and Tapered Effect implants with a Ø 4.8 mm Regular Neck.
Temporary abutments are torqued into the implant at 15 Ncm.
92
Crowns and Bridges,
syn O cta
Prosthetic System
®
1.5 Abutment
Art. No.
Article
Dimensions
Material
Price $
048.601
RN synOcta 1.5 screw-retained
abutment
height 1.5 mm
titanium alloy 160.00
048.633
RN synOcta gold coping for
synOcta 1.5 (includes modeling
aid), crown
height 4.25 mm/
12.0 mm,
alloy weight 0.36 g
Ceramicor ®/
burn-out
plastic
160.00
048.632
aid), bridge
height 4.25 mm/
12.0 mm,
alloy weight 0.33 g
Ceramicor ®/
burn-out
plastic
160.00
048.229
RN synOcta plastic coping for
synOcta 1.5, crown
height 10.0 mm
burn-out
plastic
34.00
048.227
RN synOcta plastic coping for
synOcta 1.5, bridge/bar
height 10.0 mm
burn-out
plastic
34.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
046.243
Ø 8.0 mm
stainless steel
TiN
90.00
046.241
synOcta guide pin for reamer
length 50.0 mm
stainless
steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.245
Polishing protector for
RN synOcta copings,
transocclusal screw-retained
length 15.0 mm
stainless
steel
33.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
048.560
RN synOcta Meso abutment
height 10.0 mm,
Ø 8.0 mm
titanium
195.00
048.642
RN synOcta gold abutment,
crown (includes basal screw
048.356)
height 4.3 mm,
alloy weight 0.61 g
Ceramicor®/
burn-out
plastic
255.00
048.357
synOcta basal screw
length 6.7 mm
titanium alloy
Screw-retained restorations
Auxiliary parts
PROSTHETICS
Screw- or cement-retained restorations
29.00
The RN synOcta 1.5 abutment is torqued into the implant at 35 Ncm. The occlusal screw is torqued on top of 1.5 abutment at 15 Ncm.
Ceramicor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland).
Important
RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect implants
with a Ø 4.8 mm Regular Neck.
93
1.5 Abutment
Art. No.
Article
Dimensions
Material
Price $
048.601
RN synOcta 1.5 screw-retained
abutment
height 1.5 mm
titanium alloy
160.00
048.240
RN synOcta milling cylinder
for synOcta 1.5, crown
Ø 6.0 mm,
height 8.0 mm
titanium
115.00
048.241
RN synOcta milling cylinder
for synOcta 1.5, bridge
Ø 6.0 mm,
height 8.0 mm
titanium
115.00
048.362V4
SCS Guide screw for 048.240/
241, cannot be shortened
length 8.0 mm
titanium
80.00
048.363V4
SCS Guide screw for 048.240/
241, can be shortened by 2.0 mm
length 8.0 mm
titanium
80.00
Tapered crowns and bridges of titanium
PROSTHETICS
Important
94
Crowns and Bridges,
syn O cta
Prosthetic System
®
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
048.605
RN synOcta cementable
abutment
height 5.5 mm
titanium
160.00
048.663
RN synOcta plastic coping
for RN synOcta cementable
5.5 abutment, crown
height 7.0 mm
burn-out
plastic
34.00
048.662
RN synOcta plastic coping
for for RN synOcta cementable
5.5 abutment, bridge
height 7.0 mm
burn-out
plastic
34.00
048.059V4
Transfer aid for 048.605
height 6.5 mm
plastic
30.00
046.243
Ø 8.0 mm
stainless
steel
TiN
90.00
046.246
046.243, for 048.662, 048.663
length 50.0 mm
stainless
steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/
brass
35.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
Cement-retained restorations
Auxiliary parts
PROSTHETICS
110.00
The RN synOcta cementable abutment is torqued into the
implant at 35 Ncm.
Important
95
PROSTHETICS
15° and 20° Angled Abutment
Art. No.
Article
Dimensions
Material
Price $
048.612
RN synOcta 15° angled
abutment, short, type A
height 5.7 mm A
titanium
195.00
048.613
abutment, short, type B
height 5.7 mm B
titanium
195.00
048.617
abutment, short, type A
height 5.7 mm A
titanium
195.00
048.618
abutment, short, type B
height 5.7 mm B
titanium
195.00
048.610
abutment, long, type A
height 6.7 mm A
titanium
195.00
048.611
abutment, long, type B
height 6.7 mm B
titanium
195.00
048.615
abutment, long, type A
height 6.7 mm A
titanium
195.00
048.616
abutment, long, type B
height 6.7 mm B
titanium
195.00
048.670*
Extension shell for short and long
RN s ynOcta 15° and 20° angled
abutments
height 5.5 mm
burn-out
plastic
8.00
048.676V4
Plastic shoulder for short and long
RN synOcta 15° and 20° angled
abutments
height 4.0 mm
burn-out
plastic
160.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
048.000V4
Transfer aid for RN synOcta
15° and 20° angled abutments,
short
height 4.0 mm
plastic
30.00
048.002V4
Transfer aid for RN s ynOcta
15° and 20° angled abutments,
long
height 5.5 mm
plastic
30.00
Auxiliary parts
*Requires SCS Occlusal screw (Art. No. 048.350V4) to hold into place
Important
Caution
Angled abutments are not recommended for use in the molar region.
96
Crowns and Bridges,
syn O cta
Prosthetic System
®
RN synOcta 15° and 20° angled abutments for screw- and cement-retained crowns and bridges
Type A = Angle to the edge
Important
D ue to their design, short angled abutments must not be trimmed or
individually modified; however, long angled abutments can be modified
occlusally
A butments must not be cemented into the implant.
In the case of the angled abutments, 2 types are available for each angle.
This enables the axis to be corrected in 16 different alignments.
T he RN synOcta ® angled abutments are torqued into the implant at 35 Ncm.
A ngled abutments must not be used with 15° angled hollow cylinder
Straumann implants.
A ngled abutments cannot be tightened/loosened with the extra short
SCS Screwdriver.
Important
PROSTHETICS
Type B = Angle to the surface
Caution
97
Transversal (TS) Abutment
Art. No.
Article
Dimensions
Material
Price $
048.620
RN synOcta transversal (TS)
screw-retained abutment
height 4.0 mm
titanium
160.00
048.634
RN synOcta TS gold coping
height 5.4 mm,
alloy weight 0.96 g
Ceramicor ®
160.00
048.665
RN synOcta TS plastic coping
height 5.4 mm
Ceramicor®/
burn-out
plastic
80.00
048.672
RN synOcta TS thread
protection screw for
048.634 and 048.665
Ø 3.0 mm,
length 8.2 mm
stainless
steel
15.00
049.154
Transversal screw for 048.620
Ø 2.0 mm,
length 3.0 mm
titanium
alloy
35.00
046.420
TS Hexagonal screwdriver
length 24.0 mm
stainless
steel
50.00
048.003V4
Transfer aid for RN synOcta TS
abutment
height 5.0 mm
plastic
30.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
044.570
Tap for TS
M2 x 25.0 mm
stainless
steel
45.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
PROSTHETICS
Auxiliary parts
The RN synOcta TS abutment is torqued into the implant at 35 Ncm.
The transversal screw is tightened only by hand.
Ceramicor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne
(Switzerland).
Important
98
Crowns and Bridges,
syn O cta
Prosthetic System
(Wide Neck Ø 6.5 mm)
®
Art. No.
Article
Dimensions
Material
Price $
048.013
WN Impression cap
height 8.0 mm
POM
10.00
048.095
WN synOcta positioning
cylinder, white
height 12.0 mm
POM
12.00
048.091
WN synOcta impression cap
with integral guide screw
height 10.0 mm
aluminum
49.00
048.171
WN synOcta analog, grey
length 12.0 mm
stainless
steel
32.00
048.940V4
Bite registration aid, short
Ø 5.0 mm,
height 8.0 mm
plastic
35.00
048.941V4
Bite registration aid, long
Ø 5.0 mm,
height 12.0 mm
plastic
35.00
048.233
WN synOcta post for
temporary restorations with
integral guide screw, crown
height 9.0 mm
titanium
65.00
048.234
WN synOcta post for
temporary restorations with
integral guide screw, bridge
height 9.0 mm
titanium
65.00
049.181
for 048.650/048.651 &
048.233/048.234
length 7.6 mm
titanium alloy
29.00
Bite registration
PROSTHETICS
Important
WN components can only be used with Straumann ® Standard, Standard
Plus and Tapered Effect implants with a Ø 6.5 mm Wide Neck.
Temporary posts are torqued at 15 Ncm.
99
Crowns and Bridges,
syn O cta
®
Prosthetic System
1.5 Abutment
Art. No.
Article
Dimensions
Material
Price $
048.603
WN synOcta 1.5 screw-retained
abutment
height 1.5 mm
titanium
160.00
048.638
WN synOcta gold coping for
aid), bridge
height 4.75 mm/
12.0 mm,
alloy weight 0.86 g
Ceramicor ®/
burn-out
plastic
160.00
048.639
WN synOcta gold coping for
aid), crown
height 4.75 mm/
12.0 mm,
alloy weight 0.87 g
Ceramicor ®/
burn-out
plastic
160.00
048.666
WN synOcta plastic coping,
bridge
height 10.0 mm
burn-out
plastic
34.00
048.667
WN synOcta plastic coping,
crown
height 10.0 mm
burn-out
plastic
34.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
048.644
WN synOcta gold abutment,
crown (includes basal screw
048.356)
height 4.2 mm,
alloy weight 0.78 g
Ceramicor ®/ 255.00
burn-out
plastic
048.561
WN synOcta Meso abutment
height 10.0 mm,
Ø 10.0 mm
titanium
195.00
048.357
synOcta basal screw
length 6.7 mm
titanium
alloy
29.00
046.243
Ø 8.0 mm
stainless steel
TiN
90.00
046.241
046.243, for 048.603
length 50.0 mm
stainless
steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
PROSTHETICS
Auxiliary parts
The WN synOcta ® 1.5 abutment is torqued into the implant at 35 Ncm.
The occlusal screw is torqued into the 1.5 abutment at 15 Ncm.
Ceramicor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland).
100
Important
WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect implants with a
Ø 6.5 mm Wide Neck.
Crowns and Bridges,
syn O cta
Prosthetic System
®
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
048.606
WN synOcta cementable
abutment
height 5.5 mm
titanium
160.00
048.243
WN synOcta plastic coping
for WN synOcta cementable
5.5 abutment, crown
height 7.2 mm
burn-out
plastic
34.00
048.244
WN synOcta plastic coping
for WN synOcta cementable
5.5 abutment, bridge
height 7.3 mm
burn-out
plastic
34.00
048.054V4
Transfer aid for 048.606
height 6.5 mm
plastic
30.00
046.243
Ø 8.0 mm
stainless steel
TiN
90.00
046.247
046.243, for 048.606
length 50.0 mm
stainless steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
Auxiliary parts
PROSTHETICS
The WN synOcta cementable abutment is torqued into the implant at 35 Ncm.
Important
101
Crowns and Bridges, synOcta® Prosthetic System
15° Angled Abutment for Cement-retained Crowns and Bridges
Art. No.
Article
Dimensions
Material
Price $
048.608
WN synOcta 15° angled
abutment, type A
height 5.5 mm A
titanium
195.00
048.609
WN synOcta 15° angled
abutment, type B
height 5.5 mm B
titanium
195.00
Plastic shoulder for
WN synOcta ® 15°
angled abutments
height 4.0 mm
burn-out
plastic
34.00
Transfer aid for WN synOcta
15° angled abutments
height 5.0 mm
plastic
048.678
Auxiliary part
048.032
8.00
PROSTHETICS
Important
Abutments must not be cemented into the implant.
Two types of angled WN abutments are available. This allows correction
of the axis in 16 different directions.
A ngled abutments cannot be tightened/loosened with the extra short
SCS Screwdriver.
T he WN synOcta angled abutments are torqued into the implant at 35 Ncm.
Important
Type A = Angle to the edge
Caution
Type B = Angle to the surface
102
prosthetics
HYBRID DENTURES
PROSTHETICS
103
Hybrid Dentures (Regular Neck Ø 4.8 mm)
Bar
Art. No.
Article
Dimensions
Material
Price $
048.601
RN synOcta ® 1.5
height 1.5 mm
titanium alloy
160.00
048.204
synOcta 1.5, bar
height 6.0 mm,
alloy weight 0.77 g
Ceramicor ®
160.00
048.411
Dolder ® bar, egg-shaped
cross-section, mini
height 2.3 mm,
length 25.0 mm
Elitor ®
70.00
048.412
cross-section, regular
height 3.0 mm,
length 25.0 mm
Elitor ®
125.00
048.413
Dolder ® bar matrix
includes spacer, mini
height 2.75 mm,
length 25.0 mm
Elitor ®/brass
70.00
048.414
Dolder ® bar matrix
includes spacer, regular
height 3.5 mm,
length 25.0 mm
Elitor ®/brass
95.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
040.195
Bar
2x
2x
2x
4x
PROSTHETICS
Components for gold bars
set gold, includes:
RN synOcta ® 1.5 abutment, 048.601
RN synOcta ® analog, 048.124
RN synOcta ® gold coping, bar, 048.204
SCS Occlusal screw, 048.350
760.00
Auxiliary parts
048.208V4
Stabilization pin for retaining
gold copings in solder
investment
length 11.0 mm
stainless
steel
15.00
046.150
Activator set for all bar
matrices, three-part
length 50.0 mm
stainless
steel
70.00
046.151
Deactivator for Dolder ® bar
matrices, mini
length 66.0 mm
brass,
70.00
chromeplated/
polymer
046.152
matrices, regular
length 66.0 mm
brass,
70.00
chromeplated/
polymer
For matching guide screws see page 114.
Dolder ® is a registered trademark of Prof. Eugen Dolder, former director of the School of Dentistry at the University of Zurich.
Ceramicor ® and Elitor ® are registered trademarks of Cendres & Métaux SA, Biel-Bienne (Switzerland).
104
Important
RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect implants with a
Ø 4.8 mm Regular Neck.
Bar
Art. No.
Article
Dimensions
Material
Price $
048.601
RN synOcta ® 1.5
height 1.5 mm
titanium
alloy
160.00
Components for titanium bars, prefabricated titanium parts for laser welding
048.214
RN synOcta ® titanium coping
for synOcta ® 1.5, bar
height 6.0 mm
titanium
115.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
040.196
Bar
2x
2x
2x
2x
set titanium, includes:
RN synOcta ® 1.5 abutment, 048.601
RN synOcta ® analog, 048.124
RN synOcta ® titanium coping, bar, 048.214
650.00
Plastic components for one-piece casting method for bars
048.227
RN synOcta ® plastic coping
for synOcta ® 1.5, bridge/bar
height 10.0 mm
burn-out
plastic
34.00
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
040.197
Bar
2x
2x
2x
2x
For matching guide screws see page 114.
475.00
PROSTHETICS
set plastic, includes:
RN synOcta 1.5 abutment, 048.601
RN synOcta analog, 048.124
RN synOcta plastic coping, bar, 048.227
Important
RN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect implants with a
Ø 4.8 mm Regular Neck.
105
Bar
Art. No.
Article
Dimensions
Material
Price $
046.245
Polishing protector for
RN synOcta ® copings,
transocclusal screw-retained
length 15.0 mm
stainless steel
33.00
048.108
RN s ynOcta analog for bars
with 048.601, one-part
length 11.5 mm
stainless steel
32.00
048.093V4
for bars with 048.601,
one-part, grey
height 5.0 mm
POM
80.00
048.073V4
Fixation pin for bars with
048.601, grey
length 5.0 mm
POM
25.00
046.239
Analog holder
length 105.0 mm
aluminum/steel
PROSTHETICS
Auxiliary parts
106
110.00
Important
retentive anchor
Art. No.
Article
Dimensions
Material
Price $
048.439
Retentive anchor abutment
height 3.4 mm
titanium
160.00
046.069
Retentive anchor driver
length 19.0 mm
stainless steel
150.00
048.109
Transfer pin for retentive anchor
length 18.0 mm
stainless steel
15.00
048.456
Elliptical matrix, includes
lamella retention insert
height 3.2 mm,
Ø 3.6 mm
Elitor ®/
titanium
85.00
048.457
Spare lamella retention insert
height 2.6 mm
Elitor ®
32.00
046.154
Screwdriver, for use
with 048.546
length 37.0 mm
stainless steel
70.00
048.450
Titanium matrix for retentive
anchor
height 3.1 mm
titanium alloy
85.00
048.451V4
Spacer for titanium matrix
height 3.5 mm
plastic
60.00
048.452
Screwdriver for titanium matrix
length 50.0 mm
stainless steel
70.00
048.453
Extractor for titanium matrix
length 100.0 mm
stainless steel
65.00
048.454V4
Threaded mounting ring
for titanium matrix
height 2.2 mm
plastic
85.00
048.455V4
Spring for 048.450
stainless steel
10.00
Elliptical matrix
Titanium matrix with defined retention force
PROSTHETICS
Elitor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland).
Important
107
Locator ®
Art. No.
Article
Dimensions
Material
Price $
048.175
RN LOCATOR abutment
height 1.0 mm
titanium alloy/
TiN
149.00
048.176
RN LOCATOR abutment
height 2.0 mm
titanium alloy/
TiN
149.00
048.177
RN LOCATOR abutment
height 3.0 mm
titanium alloy/
TiN
149.00
048.178
RN LOCATOR abutment
height 4.0 mm
titanium alloy/
TiN
149.00
048.179
RN LOCATOR abutment
height 5.0 mm
titanium alloy/
TiN
149.00
048.180
RN LOCATOR abutment
height 6.0 mm
titanium alloy/
TiN
149.00
LOCATOR abutments
LOCATOR ® is a registered trademark of Zest Anchors, Inc., USA.
PROSTHETICS
Manufacturer
Zest Anchors, Inc.
Escondido, CA 92029
USA
108
Important
Locator ®
Art. No.
Article
Dimensions
Material
Price $
titanium/
nylon
68.00
LOCATOR components
LOCATOR male processing p
ackage,
contents: denture cap
(Ø 5.5 mm, height 2.5 mm) with black
processing male (height 1.9 mm),
block-out spacer (048.196),
clear replacement male (048.190), pink
replacement male (048.191),
blue replacement male (048.192)
048.190V4
LOCATOR replacement male,
clear, 0°–10°*, 5 lbs, 2.27 kg**
height 1.7 mm
nylon
25.00
048.191V4
LOCATOR replacement male, pink,
light retention, 0°–10°*, 3 lbs, 1.36 kg**
height 1.7 mm
nylon
25.00
048.192V4
LOCATOR replacement male, blue,
extra-light retention, 0°–10°*,
1.5 lbs, 0.68 kg**
height 1.7 mm
nylon
25.00
048.182V2
LOCATOR male processing package,
extended range, contents: denture cap
green replacement male (048.193),
orange replacement male (048.188),
red replacement male (048.194)
titanium/
nylon
68.00
048.193V4
LOCATOR replacement male, green,
extended range, 10°–20°*, 3–4 lbs,
1.36–1.82 kg**
height 1.7 mm
nylon
25.00
048.188V4
orange, light retention, extended
range, 10°–20°*, 2 lbs, 0.91 kg**
height 1.7 mm
nylon
25.00
048.194V4
red, extra-light retention, extended
range, 10°– 20°*, 0.5 –1.5 lbs,
0.23– 0.68 kg**
height 1.7 mm
nylon
25.00
048.181V4
grey, extra-light retention, extended
range, 0 lbs.
height 1.7 mm
nylon
25.00
PROSTHETICS
048.189V2
* = For the correction of angle divergences
** = Retention force
Important
RN components can only be used with Straumann ® Standard, Standard Plus and
Tapered Effect implants with a Ø 4.8 mm Regular Neck.
109
Locator ®
Art. No.
Article
Dimensions
Material
Price $
048.198V4
LOCATOR female analog
length 10.0 mm,
Ø 5.0 mm
aluminum
74.00
048.197V4
LOCATOR impression coping
height 4.0 mm
aluminum
housing with
LDPE insert
74.00
048.196V20
LOCATOR block-out spacer
thickness 0.4 mm
Teflon ®
19.00
048.195V4
LOCATOR black processing male
height 1.9 mm
LDPE
25.00
048.218V4
LOCATOR processing spacer
POM
25.00
046.413V4
LOCATOR abutment holder sleeve
PSU
23.00
PROSTHETICS
LOCATOR components
Auxiliary parts
046.415
LOCATOR core tool
length 100.0 mm
stainless steel
88.00
046.416
LOCATOR driver, short,
for ratchet
length 15.0 mm
stainless steel
52.00
046.417
LOCATOR driver, long,
for ratchet
length 21.0 mm
stainless steel
52.00
048.199V4
length 8.0 mm
LDPE
19.00
048.200
LOCATOR angle
measurement guide
length 5.0 mm,
width 15.0 mm
stainless steel
25.00
Teflon ® is a registered trademark of E. I. du Pont de Nemours and Company.
Important
110
Hybrid Dentures (Wide Neck Ø 6.5 mm)
Locator ®
Art. No.
Article
Dimensions
Material
Price $
048.183
WN LOCATOR abutment
height 1.0 mm
titanium alloy/
TiN
149.00
048.184
WN LOCATOR abutment
height 2.0 mm
titanium alloy/
TiN
149.00
048.185
WN LOCATOR abutment
height 3.0 mm
titanium alloy/
TiN
149.00
048.186
WN LOCATOR abutment
height 4.0 mm
titanium alloy/
TiN
149.00
048.187
WN LOCATOR abutment
height 5.0 mm
titanium alloy/
TiN
149.00
LOCATOR abutments
Important
WN components can be used only with Straumann ® Standard, Standard Plus
and Tapered Effect implants with a Ø 6.5 mm Wide Neck.
PROSTHETICS
111
Locator ®
Art. No.
Article
Dimensions
Material
Price $
titanium/
nylon
68.00
PROSTHETICS
LOCATOR components
048.189V2
ackage,
clear replacement male (048.190), pink
replacement male (048.191),
048.190V4
clear, 0°–10°*, 5 lbs, 2.27 kg**
height 1.7 mm
nylon
25.00
048.191V4
height 1.7 mm
nylon
25.00
048.192V4
1.5 lbs, 0.68 kg**
height 1.7 mm
nylon
25.00
048.182V2
titanium/
nylon
68.00
048.193V4
LOCATOR replacement male, green,
1.36–1.82 kg**
height 1.7 mm
nylon
25.00
048.188V4
range, 10°–20°*, 2 lbs, 0.91 kg**
height 1.7 mm
nylon
25.00
048.194V4
range, 10°– 20°*, 0.5 –1.5 lbs,
0.23– 0.68 kg**
height 1.7 mm
nylon
25.00
048.181V4
range, 0 lbs.
height 1.7 mm
nylon
25.00
* = For the correction of angle divergences
** = Retention force
Important
112
Locator ®
Art. No.
Article
Dimensions
Material
Price $
048.198V4
length 10.0 mm,
Ø 5.0 mm
aluminum
74.00
048.197V4
height 4.0 mm
aluminum
housing with
LDPE insert
74.00
048.196V20
thickness 0.4 mm Teflon ®
19.00
048.195V4
height 1.9 mm
LDPE
25.00
048.218V4
POM
25.00
046.413V4
PSU
23.00
LOCATOR components
046.415
LOCATOR core tool
length 100.0 mm stainless
steel
88.00
046.416
for ratchet
length 15.0 mm
stainless
steel
52.00
046.417
for ratchet
length 21.0 mm
stainless
steel
52.00
048.199V4
length 8.0 mm
LDPE
19.00
048.200
LOCATOR angle
measurement guide
length 5.0 mm,
width 15.0 mm
stainless
steel
25.00
PROSTHETICS
Auxiliary parts
Important
113
Auxiliary Parts
Art. No.
Article
Dimensions
Material
Price $
048.350V4
SCS Occlusal screw
length 4.4 mm
titanium
60.00
048.360V4
SCS Guide screw
for RN synOcta ® bar copings,
cannot be shortened
length 6.0 mm
titanium
80.00
048.361V4
SCS Guide screw
for RN synOcta bar copings,
can be shortened by 1.6 mm
length 6.0 mm
titanium
80.00
048.362V4
SCS Guide screw for
048.240/241, cannot
be shortened
length 8.0 mm
titanium
80.00
048.363V4
SCS Guide screw for
048.240/241, can be
shortened by 2.0 mm
length 8.0 mm
titanium
80.00
048.364V4
SCS Guide screw,
length 10.0 mm
titanium
80.00
048.365V4
SCS Guide screw,
length 12.0 mm
titanium
80.00
048.366V4
SCS Guide screw,
length 14.0 mm
titanium
80.00
PROSTHETICS
SCS occlusal and guide screws
114
prosthetics
PROSTHETICS
CROWNS AND BRIDGES
SOLID ABUTMENT PROSTHETIC SYSTEM
115
PROSTHETICS
Crowns and Bridges, Solid Abutment Prosthetic System
Art. No.
Article
Dimensions
Material
Price $
048.540
RN Solid abutment 6 °, yellow
height 4.0 mm
titanium
160.00
048.541
RN Solid abutment 6 °, grey
height 5.5 mm
titanium
160.00
048.542
RN Solid abutment 6 °, blue
height 7.0 mm
titanium
160.00
040.740
RN Solid All-In-One set,
4.0 mm, for crown
abutment height
4.0 mm
titanium,
plastic
240.00
040.840
4.0 mm, for bridge
abutment height
4.0 mm
titanium,
plastic
240.00
040.741
5.5 mm, for crown
abutment height
5.5 mm
titanium,
plastic
240.00
040.841
5.5 mm, for bridge
abutment height
5.5 mm
titanium,
plastic
240.00
040.742
7.0 mm, for crown
abutment height
7.0 mm
titanium,
plastic
240.00
040.842
7.0 mm, for bridge
abutment height
7.0 mm
titanium,
plastic
240.00
046.067
RN Solid abutments 6 °, short
length 13.0 mm
stainless steel
150.00
046.068
RN Solid abutments 6 °, long
length 19.0 mm
stainless steel
150.00
Auxiliary parts
RN Solid abutments are torqued into the implant at 35 Ncm and must not be
removed after the impression has been taken.
Important
116
Art. No.
Article
Dimensions
Material
Price $
RN Impression cap
height 8.0 mm
POM
36.00
048.060V4
Positioning cylinder for 048.540,
yellow
height 10.2 mm
POM
44.00
048.061V4
grey
height 10.2 mm
POM
44.00
048.062V4
blue
height 10.2 mm
POM
44.00
048.160
Analog for 048.540, yellow
length 14.3 mm
aluminum
32.00
048.161
Analog for 048.541, grey
length 15.8 mm
aluminum
32.00
048.162
Analog for 048.542, blue
length 17.3 mm
aluminum
32.00
048.117V4
Shoulder analog for
RN Solid abutments,
with reinforcement pin
length 10.0 mm
plastic
32.00
length 17.0 mm
brass
040.381
Impression set for 4.0 mm,
RN Solid abutment, yellow
plastic/
anodized
aluminum
55.00
040.383
RN Solid abutment, grey
plastic/
anodized
aluminum
55.00
040.382
RN Solid abutment, blue
plastic/
anodized
aluminum
55.00
PROSTHETICS
048.017V4
048.655
RN Temporary coping for
RN Solid abutments, crown
height 8.5 mm
PMMA
28.00
048.654
RN Temporary coping for
RN Solid abutments, bridge
height 8.5 mm
PMMA
28.00
048.047V4
RN Protective cap for RN Solid
abutment, yellow, cementable
height 5.8 mm
PEEK
40.00
048.048V4
abutment, grey, cementable
height 7.3 mm
PEEK
40.00
048.049V4
abutment, blue, cementable
height 8.8 mm
PEEK
40.00
Important
117
Art. No.
Article
Dimensions
Material
Price $
Components for cement-retained crowns and bridges
048.245
Plastic coping for
RN Solid abutments, crown
height 10.0 mm
burn-out plastic
34.00
048.246
Plastic coping for
RN Solid abutments, bridge
height 10.0 mm
burn-out plastic
34.00
046.243
Ø 8.0 mm
stainless steel
TiN
90.00
046.242
for RN Solid abutments
length 50.0 mm
stainless steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.239
Analog holder
length 105.0 mm aluminum/steel
PROSTHETICS
Auxiliary parts
118
110.00
Important
Art. No.
Article
Dimensions
Material
Price $
048.545
WN Solid abutment 6 °, green
height 4.0 mm
titanium
160.00
048.546
WN Solid abutment 6 °, brown height 5.5 mm
titanium
160.00
040.745
WN Solid All-In-One set,
4.0 mm, for crown
abutment height
4.0 mm
titanium,
plastic
240.00
040.845
4.0 mm, for bridge
abutment height
4.0 mm
titanium,
plastic
240.00
040.746
5.5 mm, for crown
abutment height
5.5 mm
titanium,
plastic
240.00
040.846
5.5 mm, for bridge
abutment height
5.5 mm
titanium,
plastic
240.00
WN Impression cap
height 8.0 mm
POM
10.00
048.065
Positioning cylinder for
048.545, green
height 10.0 mm
POM
12.00
048.066
Positioning cylinder for
048.546, brown
height 10.0 mm
POM
12.00
048.165
Analog for 048.545, green
length 16.0 mm
aluminum
32.00
048.166
Analog for 048.546, brown
length 17.5 mm
aluminum
32.00
048.140
Shoulder analog for
WN Solid abutments
length 10.0 mm
aluminum
15.00
040.380
WN Solid abutment, green
plastic/anodized
aluminum
55.00
040.384
WN Solid abutment, brown
plastic/anodized
aluminum
55.00
PROSTHETICS
048.013
048.657
WN Temporary coping for
WN Solid abutments, crown
height 7.3 mm
PMMA
28.00
048.656
WN Temporary coping for
WN Solid abutments, bridge
height 7.3 mm
PMMA
28.00
048.051
WN Protective cap for
WN Solid abutment, green
height 6.0 mm
PEEK
11.00
048.052
WN Protective cap for
WN Solid abutment, brown
height 7.5 mm
PEEK
11.00
The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 83) and torqued to 35 Ncm
prior to impression taking. They must not be removed from the implant after the impression has been taken.
Important
WN components can only be used with Straumann ® Standard, Standard Plus and Tapered Effect implants with a
Ø 6.5 mm Wide Neck.
119
Art. No.
Article
Dimensions
Material
Price $
Components for cement-retained crowns and bridges
048.247
Plastic coping for WN Solid
abutments, crown
height 7.0 mm
burn-out plastic
34.00
048.248
Plastic coping for WN Solid
abutments, bridge
height 7.0 mm
burn-out plastic
34.00
046.243
diameter 8.0 mm stainless steel
TiN
90.00
046.244
for WN Solid abutments
length 50.0 mm
stainless steel
35.00
046.240
Handle for 046.241/242/243/
244/246/247 and 044.570
length 65.0 mm
steel/brass
35.00
046.239
Analog holder
length 105.0 mm
aluminum/steel
110.00
PROSTHETICS
Auxiliary parts
120
Important
prosthetics
PROSTHETICS FOR STRAUMANN ® BONE LEVEL IMPLANTS
PROSTHETICS
121
Kits, Anatomic and Gold Abutments
Art. No.
Article
Dimensions
Material
Price $
CrossFit ® PLAN set**
278.0 x 124.0 x 33.0 mm
polymer
320.00
025.2601-04
NC PLAN Anatomic abutment, straight
gingiva height 2.0 mm
POM
30.00
025.2602-04
NC PLAN Anatomic abutment, straight
POM
30.00
025.2603-04
NC PLAN Anatomic abutment, angled 15°
POM
30.00
025.2604-04
NC PLAN Anatomic abutment, angled 15°
POM
30.00
025.4601-04
RC PLAN Anatomic abutment, straight
POM
30.00
025.4602-04
RC PLAN Anatomic abutment, straight
POM
30.00
025.4603-04
RC PLAN Anatomic abutment, angled 15°
POM
30.00
025.4604-04
RC PLAN Anatomic abutment, angled 15°
POM
30.00
025.2610-04
NC PLAN Gold abutment, for crown
height 3.2 mm
POM
30.00
025.4610-04
RC PLAN Gold abutment, for crown
height 3.3 mm
POM
30.00
025.4630-04
RC PLAN Gold abutment, for bridge
height 5.2 mm
POM
30.00
PLAN Set
026.0101*
PROSTHETICS
PLAN abutments
*contains all PLAN abutments (RC top level - purple; NC bottom level - yellow)
**see inside cover of kit for final abutment article numbers
Important
CrossFit PLAN abutments must be cleaned and moist-heat sterilized at 134°C (273°F) for 18 minutes
before and after intra-oral use.
122
Narrow C ross Fit ® Connection, Cementable Abutments
Art. No.
Article
Dimensions
Material
Price $
025.2611-04
NC PLAN Cementable abutment
diameter 3.5 mm,
gingiva height 1.0 mm,
abutment height 4.0 mm
POM
30.00
025.2612-04
diameter 3.5 mm,
POM
30.00
025.2613-04
diameter 3.5 mm,
POM
30.00
025.2615-04
diameter 3.5 mm,
POM
30.00
025.2616-04
diameter 3.5 mm,
POM
30.00
025.2617-04
diameter 3.5 mm,
POM
30.00
025.2621-04
diameter 5.0 mm,
POM
30.00
025.2622-04
diameter 5.0 mm,
POM
30.00
025.2623-04
diameter 5.0 mm,
POM
30.00
025.2625-04
diameter 5.0 mm,
POM
30.00
025.2626-04
diameter 5.0 mm,
POM
30.00
025.2627-04
diameter 5.0 mm,
POM
30.00
PLAN abutments
PROSTHETICS
Important
123
Regular C ross Fit ® Connection, Cementable Abutments
Art. No.
Article
Dimensions
Material
Price $
025.4621-04
RC PLAN Cementable abutment
diameter 5.0 mm,
POM
30.00
025.4622-04
diameter 5.0 mm,
POM
30.00
025.4623-04
diameter 5.0 mm,
POM
30.00
025.4625-04
diameter 5.0 mm,
POM
30.00
025.4626-04
diameter 5.0 mm,
POM
30.00
025.4627-04
diameter 5.0 mm,
POM
30.00
025.4631-04
diameter 6.5 mm,
POM
30.00
025.4632-04
diameter 6.5 mm,
POM
30.00
025.4633-04
diameter 6.5 mm,
POM
30.00
025.4635-04
diameter 6.5 mm,
POM
30.00
025.4636-04
diameter 6.5 mm,
POM
30.00
025.4637-04
diameter 6.5 mm,
POM
30.00
PROSTHETICS
PLAN abutments
Important
124
C ross Fit ® Connection, Multi-base Abutments
Art. No.
Article
Dimensions
Material
Price $
025.2651-04
NC PLAN Multi-base abutment,
straight
diameter 3.5 mm,
POM
30.00
025.2652-04
straight
diameter 3.5 mm,
POM
30.00
025.2654-04
straight
diameter 3.5 mm,
POM
30.00
025.2656-04
straight
diameter 4.5 mm,
POM
30.00
025.2657-04
straight
diameter 4.5 mm,
POM
30.00
025.2659-04
straight
diameter 4.5 mm,
POM
30.00
025.2662-04
angled 25°, type A
diameter 4.0 mm,
POM
30.00
025.2665-04
angled 25°, type B
diameter 4.0 mm,
POM
30.00
025.4651-04
RC PLAN Multi-base abutment,
straight
diameter 4.5 mm,
POM
30.00
025.4652-04
straight
diameter 4.5 mm,
POM
30.00
025.4654-04
straight
diameter 4.5 mm,
POM
30.00
025.4656-04
straight
diameter 6.5 mm,
POM
30.00
025.4657-04
straight
diameter 6.5 mm,
POM
30.00
025.4659-04
straight
diameter 6.5 mm,
POM
30.00
025.4662-04
angled 25°, type A
diameter 4.0 mm,
POM
30.00
025.4665-04
angled 25°, type B
diameter 4.0 mm,
POM
30.00
PLAN abutments
PROSTHETICS
Important
125
C ross Fit ® Connection, LOCATOR ®
Art. No.
Article
Dimensions
Material
Price $
025.2642-04
NC PLAN LOCATOR abutment
height 2.0 mm
POM
30.00
025.2643-04
height 3.0 mm
POM
30.00
025.2644-04
height 4.0 mm
POM
30.00
025.2645-04
height 5.0 mm
POM
30.00
025.2646-04
height 6.0 mm
POM
30.00
025.4641-04
RC PLAN LOCATOR abutment
height 1.0 mm
POM
30.00
025.4642-04
height 2.0 mm
POM
30.00
025.4643-04
height 3.0 mm
POM
30.00
025.4644-04
height 4.0 mm
POM
30.00
025.4645-04
height 5.0 mm
POM
30.00
025.4646-04
height 6.0 mm
POM
30.00
Plan abutments
PROSTHETICS
Important
126
Straumann CARES ® Prosthetics
C ross Fit ® connection
Straumann® CARES® CADCAM offers you a range of implant-borne prosthetic solutions in order to achieve high-quality dental
implant restorations. Straumann CARES implant-borne elements are designed for high reliability and predictability.
All implant-borne prosthetic solutions can be ordered via the Straumann ® CARES ® Visual software.
Straumann CARES Abutments
For customized patient solutions
For cement-retained crowns and bridges via mesostructure
For screw-retained crowns (ceramic abutments only)
Available in two different materials: titanium and ceramic
One-piece abutments
Characteristics
Customized shape and emergence profile
Control over cement gap
Straumann precision fit
Process Description
1. For appropriate scanner and software compatibility
please ask your local Straumann sales representative.
2. The model situation is scanned with the Straumann CARES Scan CS2 scanner.
3. The prosthetic part of the abutment is designed with Straumann CARES Visual.
4. The data generated is sent to the Straumann milling center via the Straumann CARES Visual
software or the Straumann CARES Webshop (for abutments only − http://cares.straumann.com)
5. The customized abutment is manufactured at the Straumann milling center
6. Express delivery to the dental laboratory in just a few working days.
Article
Dimensions
Material
Price $
025.2900
NC Basal screw
length 7.9 mm
titanium alloy
23.00
025.2905
Straumann ® NC Scanbody,
length 11.7 mm
polymer
29.00
025.2903
025.2903-04
NC Wax-up sleeve, for single use
length 15.2 mm
polymer
23.00
83.00
025.2906
NC Basal screw, yellow,
for ceramic abutment only
length 8.9 mm
titanium alloy
49.00
025.4900
RC Basal screw
length 7.9 mm
titanium alloy
29.00
025.4905
Straumann ® RC Scanbody,
length 13.4 mm
polymer
23.00
025.4903
025.4903-04
RC Wax-up sleeve, for single use
length 18.8 mm
polymer
23.00
83.00
025.4906
RC Basal screw, purple,
for ceramic abutment only
length 8.2 mm
titanium alloy
49.00
019.0063
Straumann CARES Wax-up kit
contains wax-up sleeve holders for
Straumann dental restorations on
Straumann implants
PROSTHETICS
Art. No.
690.00
Coping materials for crown and bridge
zerion™
polycon® cast
ticon®
polycon® ae
Ceramic for prosthetic solutions
Titanium is used in many industries
coron®
Cobalt-Chromium (CoCr) is a
non-precious, low-cost alternative
3M™ ESPE™ Lava™ Ultimate
Comprised of nearly 80%
zirconia particles
Polycon/cast is a burn-out resin
Plastic polymethyl methacrylate (PMMA) product
IPS e.max® CAD
IPS Empress® CAD
Lithium-disilicate glass ceramic from Ivoclar Vivadent® AG
Leucite ceramic material from Ivoclar Vivadent® AG
127
Crowns and Bridges, Narrow CrossFit ® Connection
Art. No.
Article
Dimensions
Material
Price $
025.2201
NC Impression post, for closed tray,
with guide screw and cap, yellow
length 12.3 mm
titanium alloy/ 49.00
POM
025.2202
NC Impression post, for open tray,
short, with guide screw, yellow
length 16.5 mm
025.2205
NC Impression post, for open tray,
long, with guide screw, yellow
length 24.0 mm
025.2101
NC Implant analog, yellow
length 12.0 mm
titanium
32.00
025.2208-04
NC Bite registration aid
height 8.0 mm
POM
35.00
025.2212-04
NC Bite registration aid
height 12.0 mm
POM
35.00
024.2370
NC Temporary abutment
diameter 5.0 mm,
height 12.0 mm
PEEK/
titanium alloy
65.00
024.2371
NC Temporary abutment,
for crown, yellow
diameter 3.5 mm,
height 11.0 mm
024.2375
NC Temporary abutment,
for bridge, yellow
diameter 3.5 mm,
height 11.0 mm
025.2900
NC Basal screw
length 7.9 mm
046.239
Analog holder
length 105.0 mm
aluminum/
steel
Bite registration
PROSTHETICS
Auxiliary parts
The Temporary abutment is torqued into the implant at 15 Ncm.
Important
NC prosthetic components can only be used with
Straumann ® Bone Level implants, Ø 3.3 mm, Narrow CrossFit.
128
110.00
Gold, Anatomic ips e.max, Meso Abutment
Art. No.
Article
Dimensions
Material
Price $
022.2410
NC Gold abutment, for crown
engaging, weight of gold
height 3.2 mm
Ceramicor ®/
burn-out
255.00
022.2812
NC Straumann Anatomic IPS
e.max Abutment, 0°
zirconium
dioxide,
260.00
022.2814
e.max Abutment, 0°
zirconium
dioxide,
260.00
022.2822
e.max Abutment, 15°
zirconium
dioxide,
260.00
022.2824
zirconium
dioxide,
260.00
022.2832
e.max Abutment, 0°
zirconium
dioxide,
260.00
022.2834
e.max Abutment, 0°
zirconium
dioxide,
260.00
022.2842
zirconium
dioxide,
260.00
022.2844
zirconium
dioxide,
260.00
022.2102
NC Anatomic abutment,
straight
titanium
195.00
022.2104
straight
titanium
195.00
022.2152
angled 15°
titanium
195.00
022.2154
angled 15°
titanium
195.00
022.2202
NC Meso abutment
diameter 6.0 mm,
height 13.4 mm
titanium
195.00
025.2900
NC Basal screw, for titanium
abutments only
length 7.9 mm
titanium
alloy
29.00
025.2906
NC Basal Screw, for ceramic
abutments only
length 8.9 mm
titanium
alloy
49.00
025.2920
025.2920-04
NC Polishing aid
length 16.0 mm
stainless
steel
30.00
116.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
PROSTHETICS
Auxiliary parts
Ceramicor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland). All final abutments are torqued into the implant at 35 Ncm.
Important: NC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit.
Caution: Angled abutments are not recommended for use in the molar region.
129
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
022.2311
NC Cementable abutment,
blue
diameter 3.5 mm,
titanium
160.00
022.2312
blue
diameter 3.5 mm,
titanium
160.00
022.2313
blue
diameter 3.5 mm,
titanium
160.00
022.2315
blue
diameter 3.5 mm,
titanium
160.00
022.2316
blue
diameter 3.5 mm,
titanium
160.00
022.2317
blue
diameter 3.5 mm,
titanium
160.00
022.2321
yellow
diameter 5.0 mm,
titanium
160.00
022.2322
yellow
diameter 5.0 mm,
titanium
160.00
022.2323
yellow
diameter 5.0 mm,
titanium
160.00
022.2325
yellow
diameter 5.0 mm,
titanium
160.00
022.2326
yellow
diameter 5.0 mm,
titanium
160.00
022.2327
yellow
diameter 5.0 mm,
titanium
160.00
PROSTHETICS
Important
130
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
Impression taking (abutment level) and master cast fabrication, for cementable abutment
025.2203-04
NC Impression cap, blue,
for cementable abutment
diameter 3.5 mm,
POM
80.00
025.2204-04
NC Impression cap, yellow,
diameter 5.0 mm,
POM
80.00
025.2220-04
NC Impression cap, yellow,
diameter 5.0 mm,
POM
80.00
025.2112
NC Implant analog, blue,
diameter 3.5 mm,
titanium alloy
32.00
025.2116
NC Implant analog, blue,
diameter 3.5 mm,
titanium alloy
32.00
025.2122
NC Implant analog, yellow,
diameter 5.0 mm,
titanium alloy
32.00
025.2126
NC Implant analog, yellow,
diameter 5.0 mm,
titanium alloy
32.00
024.2346
NC Temporary coping,
for cementable abutment,
crown or bridge
diameter 3.5 mm
PMMA
28.00
024.2356
for cementable abutment,
crown or bridge
diameter 5.0 mm
PMMA
28.00
024.2312-04
NC Protective cap,
diameter 3.5 mm,
PEEK
40.00
024.2316-04
NC Protective cap,
diameter 3.5 mm,
PEEK
40.00
024.2322-04
NC Protective cap,
diameter 5.0 mm,
PEEK
40.00
024.2326-04
NC Protective cap,
diameter 5.0 mm,
PEEK
40.00
PROSTHETICS
Temporary restoration, for cementable abutment
Important
131
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
023.2316
NC Coping, for crown
on cementable abutment
diameter 3.5 mm
burn-out
polymer
34.00
023.2310
NC Coping, for bridge
diameter 3.5 mm
burn-out
polymer
34.00
023.2326
NC Coping, for crown
diameter 5.0 mm
burn-out
polymer
34.00
023.2320
diameter 5.0 mm
burn-out
polymer
34.00
025.2911-04
NC Transfer aid,
diameter 3.5 mm
polymer
30.00
025.2912-04
NC Transfer aid,
diameter 5.0 mm
polymer
30.00
025.2908
NC Basal screw, spare,
for cementable abutment only
length 7.9 mm
titanium
alloy
29.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
Coping, for cementable abutment
PROSTHETICS
Auxiliary parts
132
104.00
All-In-One Sets
027.4301
NC Cementable All-In-One Set,
3.5 mm, for crown
abutment height 4.0 mm,
titanium,
plastic
240.00
027.4302
3.5 mm, for crown
titanium,
plastic
240.00
027.4303
3.5 mm, for crown
titanium,
plastic
240.00
027.4307
5.0 mm, for crown
titanium,
plastic
240.00
027.4308
5.0 mm, for crown
titanium,
plastic
240.00
027.4309
5.0 mm, for crown
titanium,
plastic
240.00
027.4310
5.0 mm, for crown
titanium,
plastic
240.00
027.4311
5.0 mm, for crown
titanium,
plastic
240.00
027.4312
5.0 mm, for crown
titanium,
plastic
240.00
Important
Bridges, Narrow CrossFit ® Connection
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
022.2731
NC Multi-base abutment,
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2732
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2734
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2741
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.2786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
025.0900-04
NC/RC Occlusal screw,
for coping on multi-base
abutment only
length 4.5 mm
titanium
alloy
60.00
PROSTHETICS
Multi-base occlusal screw is torqued on to the abutment at 15 Ncm.
Important
Caution
133
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
PROSTHETICS
Impression taking (abutment level) and master cast fabrication, for multi-base abutment
025.2231-04
NC Impression cap,
for multi-base abutment, straight
diameter 3.5 mm
POM
80.00
025.2241-04
NC Impression cap,
diameter 4.5 mm
POM
80.00
025.2232
NC Impression post,
diameter 3.5 mm
titanium
alloy
49.00
025.2242
NC Impression post,
diameter 4.5 mm
titanium
alloy
49.00
025.2206
NC Impression post,
diameter 4.0 mm
for multi-base abutment, angled 25°
titanium
alloy
49.00
025.2131
NC Implant analog,
diameter 3.5 mm
titanium
alloy
32.00
025.2141
NC Implant analog,
diameter 4.5 mm
titanium
alloy
32.00
025.2106
NC Implant analog,
diameter 4.0 mm
titanium
alloy
32.00
Temporary restoration, for multi-base abutment
024.2332
diameter 3.5 mm
titanium
36.00
024.2342
diameter 4.5 mm
titanium
36.00
024.2307
diameter 4.0 mm
titanium
36.00
024.2331-04
NC Protective cap,
diameter 3.5 mm
PEEK/
titanium
alloy
95.00
024.2341-04
NC Protective cap,
diameter 4.5 mm
PEEK/
titanium
alloy
95.00
024.2306-04
NC Protective cap,
diameter 4.0 mm
PEEK/
titanium
alloy
95.00
Important
134
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
023.2731*
on multi-base abutment, straight
diameter 3.5 mm Ceramicor ®/ 160.00
burn-out
polymer
023.2741*
diameter 4.5 mm Ceramicor ®/ 160.00
burn-out
polymer
023.2701*
diameter 4.0 mm Ceramicor®/
on multi-base abutment, angled 25°
burn-out
polymer
023.2734
diameter 3.5 mm burn-out
polymer
34.00
023.2744
polymer
34.00
023.2704
on multi-base abutment, angled 25°
polymer
34.00
025.0900-04
NC/RC Occlusal screw, for coping
on multi-base abutment only
length 4.5 mm
60.00
046.239
Analog holder
length 105.0 mm aluminum/
steel
Coping, for multi-base abutment
160.00
Auxiliary parts
110.00
PROSTHETICS
titanium
alloy
(Switzerland).
Important
135
Auxiliary Parts
Art. No.
Article
Dimensions
Material
Price $
025.2920
025.2920-04
NC Polishing aid
length 16.0 mm
stainless
steel
30.00
116.00
025.2900
NC Basal screw
length 7.9 mm
titanium
alloy
29.00
025.0900-04
length 4.5 mm
titanium
alloy
60.00
046.239
Analog holder
steel
Auxiliary parts
PROSTHETICS
Important
136
110.00
Crowns and Bridges, Regular CrossFit ® Connection
Art. No.
Article
Dimensions
Material
Price $
025.4201
RC Impression post, for
closed tray, with guide screw
and cap
length 12.3 mm
titanium alloy/
POM
49.00
025.4202
RC Impression post, for open
tray, short, with guide screw
length 16.5 mm
titanium alloy
49.00
025.4205
RC Impression post, for open
tray, long, with guide screw
length 24.0 mm
titanium
alloy
49.00
025.4101
RC Implant analog
length 12.0 mm
titanium
32.00
025.4208-04
RC Bite registration aid
height 8.0 mm
polymer
35.00
025.4212-04
RC Bite registration aid
height 12.0 mm
polymer
35.00
024.4370
RC Temporary abutment
diameter 7.0 mm,
height 12.0 mm
PEEK/
titanium alloy
65.00
024.4371
RC Temporary abutment,
for crown
diameter 4.5 mm,
height 11.0 mm
titanium alloy
65.00
024.4375
RC Temporary abutment,
for bridge
diameter 4.5 mm,
height 11.0 mm
titanium alloy
65.00
025.4900
RC Basal screw
length 7.9 mm
titanium alloy
29.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
Bite registration
PROSTHETICS
Auxiliary parts
110.00
The Temporary abutment is torqued into the implant at 15 Ncm.
Important
RC prosthetic components can only be used with
Straumann ® Bone Level implants, Ø 4.1 and Ø 4.8 mm, Regular CrossFit.
137
Gold and Anatomic IPS e.max® Abutment
Art. No.
Article
Dimensions
Material
Price $
RC Gold abutment, for bridge
non-engaging
height 5.2 mm
Ceramicor®/
burn-out
polymer
255.00
022.4410
RC Gold abutment, for crown
engaging
height 3.3 mm
Ceramicor®/
burn-out
polymer
255.00
022.4812
Straumann ® RC anatomic
IPS e.max ® abutment, straight
zirconium
dioxide,
MO 0
260.00
022.4814
zirconium
dioxide,
MO 0
260.00
022.4822
IPS e.max ® abutment, angled 15°
zirconium
dioxide,
MO 0
260.00
022.4824
zirconium
dioxide,
MO 0
260.00
022.4832
zirconium
dioxide,
MO 1
260.00
022.4834
zirconium
dioxide,
MO 1
260.00
022.4842
zirconium
dioxide,
MO 1
260.00
022.4844
zirconium
dioxide,
MO 1
260.00
022.4430
PROSTHETICS
MO 0= Medium opacity, white
MO 1 = Medium opacity, shaded
Ceramicor ® is a registered trademark of Cendres & Métaux SA, Switzerland.
IPS e.max ® is a registered trademark of Ivoclar Vivadent AG, Liechtenstein.
Important
Caution
138
Anatomic, Meso Abutment
Art. No.
Article
Dimensions
Material
Price $
022.4102
RC Anatomic abutment,
straight
titanium
195.00
022.4104
straight
titanium
195.00
022.4152
angled 15°
titanium
195.00
022.4154
angled 15°
titanium
195.00
022.4202
RC Meso abutment
diameter 8.0 mm,
height 13.4 mm
titanium
195.00
025.4920
025.4920-04
RC Polishing aid
length 16.0 mm
stainless
steel
30.00
116.00
025.4900
RC Basal screw, for titanium
abutments only
length 7.9 mm
titanium
alloy
29.00
025.4906
RC Basal screw, for ceramic
abutments only
length 8.2 mm
titamium
alloy
49.00
025.4902
RC Basal screw, for gold
abutment, for bridge only
length 8.3 mm
titanium
alloy
29.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
Auxiliary parts
PROSTHETICS
Important
Caution
139
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
022.4321
RC Cementable abutment
diameter 5.0 mm,
titanium
160.00
022.4322
diameter 5.0 mm,
titanium
160.00
022.4323
diameter 5.0 mm,
titanium
160.00
022.4325
diameter 5.0 mm,
titanium
160.00
022.4326
diameter 5.0 mm,
titanium
160.00
022.4327
diameter 5.0 mm,
titanium
160.00
022.4331
diameter 6.5 mm,
titanium
160.00
022.4332
diameter 6.5 mm,
titanium
160.00
022.4333
diameter 6.5 mm,
titanium
160.00
022.4335
diameter 6.5 mm,
titanium
160.00
022.4336
diameter 6.5 mm,
titanium
160.00
022.4337
diameter 6.5 mm,
titanium
160.00
PROSTHETICS
Important
140
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
Impression taking (abutment level) and master cast fabrication, for cementable abutment
RC Impression cap,
diameter 5.0 mm,
POM
80.00
025.4220-04
RC Impression cap,
diameter 5.0 mm,
POM
80.00
025.4204-04
RC Impression cap,
diameter 6.5 mm,
POM
80.00
025.4230-04
RC Impression cap,
diameter 6.5 mm,
POM
80.00
025.4132
RC Implant analog,
diameter 5.0 mm,
titanium
alloy
32.00
025.4136
RC Implant analog,
diameter 5.0 mm,
titanium
alloy
32.00
025.4122
RC Implant analog,
diameter 6.5 mm,
titanium
alloy
32.00
025.4126
RC Implant analog,
diameter 6.5 mm,
titanium
alloy
32.00
Temporary restoration, for cementable abutment
024.4356
RC Temporary coping,
diameter 5.0 mm
PEEK
28.00
024.4366
diameter 6.5 mm
PEEK
28.00
024.4322-04
RC Protective cap,
diameter 5.0 mm,
PEEK
40.00
024.4326-04
RC Protective cap,
diameter 5.0 mm,
PEEK
40.00
024.4332-04
RC Protective cap,
diameter 6.5 mm,
PEEK
40.00
024.4336-04
RC Protective cap,
diameter 6.5 mm,
PEEK
40.00
PROSTHETICS
025.4203-04
Important
141
Cementable Abutment
Art. No.
Article
Dimensions
Material
Price $
023.4326
RC Coping, for crown
diameter 5.0 mm
burn-out
polymer
34.00
023.4320
RC Coping, for bridge
diameter 5.0 mm
burn-out
polymer
34.00
023.4336
RC Coping, for crown
diameter 6.5 mm
burn-out
polymer
34.00
023.4330
RC Coping, for bridge
diameter 6.5 mm
burn-out
polymer
34.00
025.4912-04
RC Transfer aid,
diameter 5.0 mm
polymer
30.00
025.4913-04
RC Transfer aid,
diameter 6.5 mm
polymer
30.00
025.4908
RC Basal screw,
for cementable abutment only
length 7.9 mm
titanium
alloy
29.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
027.4313
RC Cementable All-In-One Set,
5.0 mm, for crown
titanium,
plastic
240.00
027.4314
5.0 mm, for crown
titanium,
plastic
240.00
027.4315
5.0 mm, for crown
titanium,
plastic
240.00
027.4316
5.0 mm, for crown
titanium,
plastic
240.00
027.4317
5.0 mm, for crown
titanium,
plastic
240.00
027.4318
5.0 mm, for crown
titanium,
plastic
240.00
027.4319
6.5 mm, for crown
titanium,
plastic
240.00
027.4320
6.5 mm, for crown
titanium,
plastic
240.00
027.4321
6.5 mm, for crown
titanium,
plastic
240.00
027.4322
6.5 mm, for crown
titanium,
plastic
240.00
027.4323
6.5 mm, for crown
titanium,
plastic
240.00
027.4324
6.5 mm, for crown
titanium,
plastic
240.00
Coping, for cementable abutment
Auxiliary parts
PROSTHETICS
All-In-One Sets
142
Important
Bridges, Regular CrossFit ® Connection
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
022.4741
RC Multi-base abutment,
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4761
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4762
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4764
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.4786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
PROSTHETICS
Important
Caution
143
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
PROSTHETICS
Impression taking (abutment level) and master cast fabrication, for multi-base abutment
025.4241-04
RC Impression cap,
for multi-base abutment,
straight
diameter 4.5 mm
POM
80.00
025.4261-04
RC Impression cap,
straight
diameter 6.5 mm
POM
80.00
025.4242
RC Impression post,
straight
diameter 4.5 mm
titanium
alloy
49.00
025.4262
RC Impression post,
straight
diameter 6.5 mm
titanium
alloy
49.00
025.4206
RC Impression post,
angled 25°
diameter 4.0 mm
titanium
alloy
49.00
025.4141
RC Implant analog,
straight
diameter 4.5 mm
titanium
alloy
32.00
025.4161
RC Implant analog,
straight
diameter 6.5 mm
titanium
alloy
32.00
025.4106
RC Implant analog,
angled 25°
diameter 4.0 mm
titanium
alloy
32.00
Temporary restoration, for multi-base abutment
024.4342
straight
diameter 4.5 mm
titanium
36.00
024.4362
straight
diameter 6.5 mm
titanium
36.00
024.4307
angled 25°
diameter 4.0 mm
titanium
36.00
024.4341-04
RC Protective cap,
straight
diameter 4.5 mm
PEEK/
titanium
alloy
95.00
024.4361-04
RC Protective cap,
straight
diameter 6.5 mm
PEEK/
titanium
alloy
95.00
024.4306-04
RC Protective cap,
angled 25°
diameter 4.0 mm
PEEK/
titanium
alloy
95.00
Important
144
Multi-Base Abutment
Art. No.
Article
Dimensions
Material
Price $
023.4741
RC Coping, for bridge on
multi-base abutment, straight
diameter 4.5 mm
Ceramicor®/ 160.00
burn-out
polymer
023.4761
diameter 6.5 mm
Ceramicor®/ 160.00
burn-out
polymer
023.4701
multi-base abutment, angled 25°
diameter 4.0 mm
Ceramicor®/
burn-out
polymer
160.00
023.4744
diameter 4.5 mm
burn-out
polymer
34.00
023.4764
diameter 6.5 mm
burn-out
polymer
34.00
023.4704
diameter 4.0 mm
burn-out
polymer
34.00
025.0900-04
length 4.5 mm
titanium
alloy
60.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
Coping, for multi-base abutment
Auxiliary parts
PROSTHETICS
110.00
Multi-base occlusal screws are torqued into the abutment at 15 Ncm.
(Switzerland).
Important
145
Auxiliary Parts
Art. No.
Article
Dimensions
Material
Price $
025.4920
025.4920-04
RC Polishing aid
steel
025.4900
RC Basal screw
length 7.9 mm
titanium
alloy
29.00
025.4902
RC Basal screw, for gold abutment,
for bridge only
length 8.3 mm
titanium
alloy
29.00
025.4908
RC Basal screw, for cementable
abutment only
length 7.9 mm
titanium
alloy
29.00
025.0900-04
length 4.5 mm
titanium
alloy
60.00
046.239
Analog holder
steel
PROSTHETICS
Auxiliary parts
146
30.00
116.00
110.00
Important
Hybrid Dentures, Narrow CrossFit ® Connection
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
022.2502
NC LOCATOR abutment
height 2.0 mm
titanium a lloy/
TiN
149.00
022.2503
NC LOCATOR abutment
height 3.0 mm
titanium a lloy/
TiN
149.00
022.2504
NC LOCATOR abutment
height 4.0 mm
titanium a lloy/
TiN
149.00
022.2505
NC LOCATOR abutment
height 5.0 mm
titanium a lloy/
TiN
149.00
022.2506
NC LOCATOR abutment
height 6.0 mm
titanium a lloy/
TiN
149.00
LOCATOR ® Abutments
Important
PROSTHETICS
147
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
LOCATOR components
048.189V2
ackage,
white replacement male (048.190),
pink replacement male (048.191),
048.190V4
white, 0°–10°*, 5 lbs,
2.27 kg**
048.191V4
68.00
height 1.7 mm
nylon
25.00
light retention, 0°–10°*, 3 lbs,
1.36 kg**
height 1.7 mm
nylon
25.00
048.192V4
1.5 lbs, 0.68 kg**
height 1.7 mm
nylon
25.00
048.182V2
titanium/
nylon
68.00
048.193V4
green, extended range, 10°–20°*,
3–4 lbs, 1.36–1.82 kg**
height 1.7 mm
nylon
25.00
048.188V4
range, 10°–20°*, 2 lbs, 0.91 kg**
height 1.7 mm
nylon
25.00
048.194V4
range, 10°– 20°*, 0.5 –1.5 lbs,
0.23– 0.68 kg**
height 1.7 mm
nylon
25.00
048.181V4
range, 0 lbs.
height 1.7 mm
nylon
25.00
PROSTHETICS
titanium/
nylon
*
**
= For the correction of angle divergences
= Retention force
Important
148
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
025.0120-04
length 10.0 mm,
diameter 5.0 mm
aluminum
74.00
048.197V4
height 4.0 mm
aluminum
housing with
LDPE insert
74.00
048.196V20
thickness 0.4 mm
Teflon ®
19.00
048.195V4
height 1.9 mm
LDPE
25.00
048.218V4
POM
25.00
046.413V4
PSU
23.00
LOCATOR components
Auxiliary parts
LOCATOR core tool
length 100.0 mm
stainless
steel
88.00
046.416
for ratchet
length 15.0 mm
stainless
steel
52.00
046.417
for ratchet
length 21.0 mm
stainless
steel
52.00
048.199V4
length 8.0 mm
LDPE
19.00
048.200
LOCATOR angle
measurement guide
length 5.0 mm,
width 15.0 mm
stainless
steel
25.00
PROSTHETICS
046.415
149
Bar
Art. No.
Article
Dimensions
Material
Price $
022.2701
NC Abutment for bars, gold
height 10.0 mm
Ceramicor ®
255.00
022.2731
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2732
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2734
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2741
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.2786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
023.2732
NC Coping, for bar on multibase abutment, straight
diameter 3.5 mm
Ceramicor ®
160.00
023.2742
NC Coping, for bar on multibase abutment, straight
diameter 4.5 mm
Ceramicor ®
160.00
023.2702
NC Coping, for bar on multibase abutment, angled 25°
diameter 4.0 mm
Ceramicor ®
160.00
048.411
cross-section, mini
height 2.3 mm,
length 25.0 mm
Elitor ®
70.00
048.412
height 3.0 mm,
length 25.0 mm
Elitor ®
125.00
048.413
Dolder ® bar matrix,
height 2.75 mm,
length 25.0 mm
Elitor ®/
brass
70.00
048.414
height 3.5 mm,
length 25.0 mm
Elitor ®/
brass
95.00
PROSTHETICS
Dolder ® is a registered trademark of Prof. Eugen Dolder, former director of 
the School of Dentistry at the University of Zurich.
Ceramicor ® and Elitor ® are registered trademarks of Cendres & Métaux SA,
Biel-Bienne (Switzerland).
Important
Caution
150
Bar
Art. No.
Article
Dimensions
Material
Price $
046.150
Activator set for all bar matrices,
three-part
length 50.0 mm
stainless steel
70.00
046.151
matrices, mini
length 66.0 mm
brass, chromeplated/
polymer
70.00
046.152
matrices, regular
length 66.0 mm
polymer
70.00
025.2900
NC Basal Screw
length 7.9 mm
titanium alloy
29.00
025.0900-04
length 4.5 mm
titanium alloy
60.00
025.0911-04
NC/RC Stabilization pin,
for bar on multi-base abutment
length 16.0 mm
stainless steel
15.00
Auxiliary parts
PROSTHETICS
Dolder ® is a registered trademark of Prof. Eugen Dolder, former director of 
the School of Dentistry at the University of Zurich.
Important
151
Bar
Art. No.
Article
Dimensions
Material
Price $
022.2702
NC Abutment for bars,
titanium
height 10.0 mm
titanium
160.00
022.2731
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2732
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2734
straight
diameter 3.5 mm,
titanium
alloy
160.00
022.2741
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.2782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.2786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
023.2736
NC Coping, for bar on
diameter 3.5 mm
titanium
115.00
023.2746
diameter 4.5 mm
titanium
115.00
023.2706
diameter 4.0 mm
titanium
115.00
PROSTHETICS
Components for titanium bars
Important
Caution
152
Bar
Art. No.
Article
Dimensions
Material
Price $
025.2900
NC Basal Screw
length 7.9 mm
titanium
alloy
29.00
025.0900-04
length 4.5 mm
titanium
alloy
60.00
Auxiliary parts
Important
PROSTHETICS
153
Auxiliary Parts
Art. No.
Article
Dimensions
Material
Price $
025.2920
025.2920-04
NC Polishing aid
length 16.0 mm stainless steel
025.2900
NC Basal screw
length 7.9 mm
titanium alloy
29.00
025.0900-04
length 4.5 mm
titanium alloy
60.00
025.0911-04
steel
15.00
046.239
Analog holder
steel
110.00
Auxiliary parts
PROSTHETICS
Important
154
30.00
116.00
Hybrid Dentures, Regular CrossFit ® Connection
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
022.4501
RC LOCATOR abutment
height 1.0 mm
titanium a lloy/
TiN
149.00
022.4502
RC LOCATOR abutment
height 2.0 mm
titanium a lloy/
TiN
149.00
022.4503
RC LOCATOR abutment
height 3.0 mm
titanium a lloy/
TiN
149.00
022.4504
RC LOCATOR abutment
height 4.0 mm
titanium a lloy/
TiN
149.00
022.4505
RC LOCATOR abutment
height 5.0 mm
titanium a lloy/
TiN
149.00
022.4506
RC LOCATOR abutment
height 6.0 mm
titanium a lloy/
TiN
149.00
LOCATOR Abutments
PROSTHETICS
Important
Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, Regular CrossFit.
155
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
titanium/
nylon
68.00
PROSTHETICS
LOCATOR components
048.189V2
ackage,
white replacement male (048.190),
pink replacement male (048.191),
048.190V4
white, 0°–10°*, 5 lbs, 2.27 kg**
height 1.7 mm
nylon
25.00
048.191V4
height 1.7 mm
nylon
25.00
048.192V4
1.5 lbs, 0.68 kg**
height 1.7 mm
nylon
25.00
048.182V2
titanium/
nylon
68.00
048.193V4
LOCATOR replacement male, green, height 1.7 mm
1.36–1.82 kg**
nylon
25.00
048.188V4
range, 10°–20°*, 2 lbs, 0.91 kg**
height 1.7 mm
nylon
25.00
048.194V4
range, 10°– 20°*, 0.5 –1.5 lbs,
0.23– 0.68 kg**
height 1.7 mm
nylon
25.00
048.181V4
range, 0 lbs.
height 1.7 mm
nylon
25.00
048.218V4
POM
25.00
046.413V4
PSU
23.00
*
**
= For the correction of angle divergences
= Retention force
Important
Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, Regular CrossFit.
156
LOCATOR ® Abutment
Art. No.
Article
Dimensions
Material
Price $
025.0120-04
length 10.0 mm,
diameter 5.0 mm
aluminum
74.00
048.197V4
height 4.0 mm
aluminum
housing with
LDPE insert
74.00
048.196V20
thickness 0.4 mm
Teflon ®
19.00
048.195V4
LOCATOR black processing
male
height 1.9 mm
LDPE
25.00
046.415
LOCATOR core tool
length 100.0 mm
stainless steel
88.00
046.416
for ratchet
length 15.0 mm
stainless steel
52.00
046.417
for ratchet
length 21.0 mm
stainless steel
52.00
048.199V4
length 8.0 mm
LDPE
19.00
048.200
LOCATOR angle
measurement guide
length 5.0 mm,
width 15.0 mm
stainless steel
25.00
046.414
LOCATOR core tool tip
LOCATOR components
Auxiliary parts
PROSTHETICS
36.00
157
Bar
Art. No.
Article
Dimensions
Material
Price $
022.4701
RC Abutment for bars, gold
height 10.0 mm
Ceramicor® 255.00
022.4741
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4761
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4762
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4764
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.4786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
023.4742
RC Coping, for bar on
diameter 4.5 mm
Ceramicor®
160.00
023.4762
diameter 6.5 mm
Ceramicor®
160.00
023.4702
diameter 4.0 mm
Ceramicor®
160.00
048.411
cross-section, mini
height 2.3 mm,
length 25.0 mm
Elitor ®
70.00
048.412
height 3.0 mm,
length 25.0 mm
Elitor ®
125.00
048.413
height 2.75 mm,
length 25.0 mm
Elitor ®/
brass
70.00
048.414
height 3.5 mm,
length 25.0 mm
Elitor ®/
brass
95.00
PROSTHETICS
Dolder ® is a registered trademark of Prof. Eugen Dolder,
former director of the School of Dentistry at the University of Zurich.
Ceramicor ® and Elitor ® are registered trademarks of Cendres & Métaux SA,
Biel-Bienne (Switzerland).
Important
158
Caution
Bar
Art. No.
Article
Dimensions
Material
Price $
046.150
Activator set for all bar matrices,
three-part
length 50.0 mm
stainless steel
70.00
046.151
Deactivator for Dolder ®
bar matrices, mini
length 66.0 mm
polymer
70.00
046.152
Deactivator for Dolder ®
bar matrices, regular
length 66.0 mm
polymer
70.00
025.4900
RC Basal screw
length 7.9 mm
titanium alloy
29.00
025.0900-04
length 4.5 mm
titanium alloy
60.00
025.0911-04
length 16.0 mm
stainless steel
15.00
Auxiliary parts
PROSTHETICS
Dolder ® is a registered trademark of Prof. Eugen Dolder,
former director of the School of Dentistry at the University of Zurich.
Important
159
Bar
Art. No.
Article
Dimensions
Material
Price $
022.4702
RC Abutment for bars,
titanium
height 10.0 mm
titanium
160.00
022.4741
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4742
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4744
straight
diameter 4.5 mm,
titanium
alloy
160.00
022.4761
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4762
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4764
straight
diameter 6.5 mm,
titanium
alloy
160.00
022.4782
angled 25°, type A
diameter 4.0 mm,
titanium
alloy
195.00
022.4786
angled 25°, type B
diameter 4.0 mm,
titanium
alloy
195.00
023.4746
diameter 4.5 mm
titanium
115.00
023.4766
diameter 6.5 mm
titanium
115.00
023.4706
RC Coping, for bar on multi-base
abutment, angled 25°
diameter 4.0 mm
titanium
115.00
PROSTHETICS
Components for titanium bars
Important
Caution
160
Bar
Art. No.
Article
Dimensions
Material
Price $
025.4900
RC Basal screw
length 7.9 mm
titanium alloy
29.00
025.0900-04
NC/RC Occlusal screw,
for coping on multi-base
abutment only
length 4.5 mm
titanium alloy
60.00
Auxiliary parts
Important
PROSTHETICS
161
Auxiliary Parts
Art. No.
Article
Dimensions
Material
Price $
025.4920
025.4920-04
RC Polishing Aid
length 16.0 mm
stainless
steel
30.00
116.00
025.4900
RC Basal Screw
length 7.9 mm
titanium alloy
29.00
025.0900-04
length 4.5 mm
titanium alloy
60.00
025.0911-04
length 16.0 mm
stainless
steel
15.00
046.239
Analog holder
length 105.0 mm
aluminum/
steel
110.00
Auxiliary parts
PROSTHETICS
Important
162
service
Service Materials
164
SERVICE
163
Service
Service Materials
Art. No.
Article
Material
Price $
140.019
Straumann ® Standard Plus (NN) implant
consisting of:
NN Standard Plus implant, NN Healing cap
with integr. occlusal screw, NN Impression cap,
NN Protective cap with integr. occlusal screw,
NN Analog, NN Framework blank, NN Titanium
abutment coping, SCS Screwdriver, plastic box
metal, plastic
325.00
140.024
synOcta ® system
consisting of:
Standard Plus Implant, RN Impression cap,
RN synOcta ® positioning cylinder, RN synOcta ®
analog, RN synOcta ® abutment, SCS Screwdriver,
RN synOcta ® gold coping with plastic crown,
SCS Occlusal screw, plastic box
metal, plastic
365.00
140.062
Straumann ® Tapered Effect implant
Ø 4.1 mm, RN, SLA® 10 mm, cardboard box
stainless steel
65.00
140.032
Lower jaw, edentulous,
with 2 implants (S Ø 4.1 mm, RN)
plastic,
acrylic glass,
titanium
55.00
140.049
Lower jaw, edentulous,
with 4 implants (S Ø 4.1 mm, RN)
plastic,
acrylic glass,
titanium
85.00
140.033
Upper jaw, two single-tooth gaps and unilateral
free-end saddle, with 4 implants
– 1 x Standard Plus implant Ø 3.3 mm, NN
– 1 x Standard implant Ø 4.8 mm, WN
– 1 x Standard implant Ø 4.1 mm, RN
– 1 x Standard implant Ø 4.8 mm, RN
plastic,
acrylic glass,
titanium
55.00
5:1 Models
SERVICE
1:1 Models
3:1 Models
140.120
164
Premium patient illustration model
250.00
additional information
166
Documentation
169
INFORMATION
165
Additional Information
The properties of unalloyed grade 4 titanium for implants and abutments
a) Chemical composition
O FeC N H Ti
0.40% max.
0.50% max.
0.10% max.
0.05% max.
0.012% max.
Balance
b) Mechanical properties
Strength
Forged/annealed
550 MPa min.
Cold-worked
680 MPa min.
Elongation
15% min.
10% min.
Modulus of elasticity
110 GPa
110 GPa
Ti-N = titanium nitride-coating Process:
PVD (physical vapor deposition)
Layer thickness:
3–12 µm
Color:
golden yellow
c) Technical information
Grade 4 titanium conforms to the ISO 5832-2 standard
The properties of the alloy Titanium Aluminium-6 Niobium-7 (TAN) for Straumann abutments
a) Chemical Composition
Al
5.5 –
6.5%
Nb
6.5 –
7.5%
Ta
0.50%
max.
Fe
0.25%
max.
O
0.20%
max.
C
0.08%
max.
N
0.05%
max.
H
0.009%
max.
Ti
balance
b) Mechanical properties
INFORMATION
Strength
Annealed
900 MPa min.
166
Elongation
10 % min.
Modulus of elasticity
110 GPa
c) Technical informationThe alloy Titanium Aluminium-6 Niobium-7 (TAN) conforms to the ISO 5832-11
standard
Alloys
Color Composition
Au Pt Pd Ag Cu Ir Others Ceramicor ® Elitor ®
white
yellowish
%
60.0
%
19.0
%
20.0
%
%
%
1.0
+ = <1%
68.6
2.5
4.0
11.8
10.6
+
Zn 2.5
Melting range °C
1400–1490 880–940
°F 2552–27141616–1724
Coefficient of
CTE °C
thermal expansion
25–500 °C = 11,9 µm/m X °C
25–600 °C = 12,2 µm/m X °C
CTE °F
77–932 °F = 11,9 µm/m X °F
77–1112 °F = 12,2 µm/m X °F
Hardness in as-delivered condition
HV5
220
260
Hardness after HV5
casting-on or soldering
205
self-hardening
> 260
self-hardening
Hardened 0.2% Proof stress
(Rp 0.2%)
as-delivered condition
HV5 205 275
N/mm2 780780
0.2% Proof stress N/mm2 635655
(Rp 0.2%) after
casting-on or soldering
casting-on or
soldering
soldering
Technical informationNon-oxidizing alloy
Applications
for casting-on with
precious metal alloys
or for soldering with
precious metal or
non-precious metal alloys
Alloy for construction
elements attachments
INFORMATION
Possibilities for
metallic bonding
Ceramicor ® and Elitor ® are registered trademarks of Cendres & Métaux SA, Biel-Bienne (Switzerland).
167
Alloys ESTHETICOR ® COSMOR H
Color pale yellow
Composition
Au+Pt-Metals %
Au %
Pt %
Pd %
In %
Ir%
Melting range °C
°F
96.5
78.5
10.0
7.8
3.5
0.2
1120 – 1280
2048 – 2336
Coefficient of CTE °C
thermal expansion
25–500 °C = 13.8 µm/m X °C
25–600 °C = 14.0 µm/m X °C
°F
77–932 °F = 13.8 µm/m X °F
77–1112 °F = 14.0 µm/m X °F
ISO 9693 pos. 6.3.3.3 positive
Hardness after firing
HV5
215
Tensile strength (Rm)N/mm2705
after firing
0.2% Proof stress
(Rp 0.2%)
after firing
INFORMATION
Elongation at break (A5)
after firing
N/mm2565
%
12.5
Density g/cm2
18.2
Technical information
Applications
Low oxidation
Alloy corresponds to
ISO 9693 standard
Estheticor ® is a registered trademark of Cendres & Métaux SA, Biel-Bienne (Switzerland).
168
documentation
Documentation
All users
Art. no. USLIT 007
122461_15X.754.indd a
For surgical dentists
and surgeons
For prosthetic dentists
and dental technicians
For dental assistants
BASIC INFORMATION ON THE
SURGICAL PROCEDURES
basic informaton on
Crown and Bridge
restorations
basic informaton on
instrument Care and
maintenanCe
Straumann® Dental Implant System
synOcta ® Prosthetic System
Straumann® Dental Implant System
17.9.2007 9:46:59 Uhr
Art. no. USLIT 100Electronic only (PDF)Electronic only (PDF)
BASIC INFORMATION ON THE
prosthetic procedures
Straumann® Bone Level Implant Line
Art. no. USLIT 261
Art. no. USLIT 232
Our detailed documentation will assist you in carefully planning your implant-based restorations. For additional information,
contact your local Straumann representative or visit our website at www.straumann.us
INFORMATION
169
index
Numerical Index
172
Alphabetical Index
188
INDEX
171
INDEX
Numerical Index
172
019.0370
coDiagnostiX 8 PPP
10
019.0371
coDiagnostiX 8 PPG
10
019.0372
10
019.0373
coDiagnostiX 8 coDoctor
10
019.0374
coDiagnostiX 8 unit
10
019.0201gonyX™
11
019.0212NSK handpiece for gonyX
11
019.0216NSK control unit NA
11
019.0063
Wax up kit, CARES, contains wax up sleeve holders for Straumann dental restorations on Straumann implants
90/127
021.2108
Bone Level Implant Ø 3.3 mm, Narrow CrossFit ®, SLActive ® 8.0 mm, titanium
16/40
021.2110
Bone Level Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 10.0 mm, titanium
16/40
021.2112
16/40
021.2114
Bone Level Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 14.0 mm titanium
16/40
021.2208 Bone Level Roxolid® Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 8.0 mm, TiZr
41/18
021.2210
Bone Level Roxolid Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 10.0 mm, TiZr
41/18
021.2212
41/18
021.2214
41/18
021.2408
Bone Level Implant Ø 3.3 mm, Narrow CrossFit, SLA® 8.0 mm, titanium
17/40
021.2410
17/40
021.2412
17/40
021.2414
17/40
021.4108
Bone Level Implant Ø 4.1 mm, Regular CrossFit, SLActive ® 8.0 mm, titanium
16/42
021.4108G Bone Level Guided Implant Ø 4.1 mm, Regular CrossFit, SLActive ® 8.0 mm, titanium
42
021.4110
16/42
42
021.4112
16/42
42
021.4114
16/42
021.4408
Bone Level Implant Ø 4.1 mm, Regular CrossFit, SLA® 8.0 mm, titanium
17/42
021.4410
17/42
021.4412
17/42
021.4414
17/42
021.6108
16/43
43
021.6110
16/43
43
021.6112
16/43
43
021.6114
16/43
021.6408
17/43
021.6410
17/43
021.6412
17/43
021.6414
17/43
022.2102NC Anatomic abutment, straight, gingiva height 2.0 mm, titanium
129
022.2104NC Anatomic abutment, straight, gingiva height 3.5 mm, titanium
129
022.2152NC Anatomic abutment, angled 15°, gingiva height 2.0 mm, titanium
129
022.2154NC Anatomic abutment, angled 15°, gingiva height 3.5 mm, titanium
129
022.2202NC Meso abutment, diameter 6.0 mm, height 13.4 mm, titanium
129
022.2311NC Cementable abutment, diameter 3.5 mm, gingiva height 1.0 mm, abutment height 4.0 mm, titanium
130
130
130
130
130
130
130
130
130
130
130
130
022.2410NC Gold abutment, for crown, height 3.2 mm, Ceramicor ®/burn-out polymer
129
022.2502NC LOCATOR® abutment, height 2.0 mm, titanium alloy with TiN coating
147
147
147
147
147
022.2701NC Abutment for bars, gold, height 10.0 mm, Ceramicor ®150
022.2702NC Abutment for bars, titanium, height 10.0 mm, titanium
152
022.2731NC Multi-base abutment, straight, diameter 3.5 mm, gingiva height 1.0 mm, titanium alloy
133/150/152
133/150/152
Numerical Index
INDEX
133/150/152
133/150/152
133/150/152
133/150/152
022.2782NC Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, titanium alloy
133/150/152
022.2786NC Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, titanium alloy
133/150/152
022.2812NC Anatomic IPS e.max Abutment, straight, gingiva height 2.0 mm, zirconium dioxide, MO 0
129
129
022.2822NC Anatomic IPS e.max Abutment, angled 15°, gingiva height 2.0 mm, zirconium dioxide, MO 0
129
129
129
022.2834NC Anatomic IPS e.max Abutment, straight, gingiva height 3.5, zirconium dioxide, MO 1
129
129
022.2844NC Anatomic IPS e.max Abutment, angled 15°, gingiva heigh 3.5 mm, zirconium dioxide, MO 1
129
022.4102
RC Anatomic abutment, straight, gingiva height 2.0 mm, titanium
139
022.4104
139
022.4152
RC Anatomic abutment, angled 15°, gingiva height 2.0 mm, titanium
139
022.4154
139
022.4202
RC Meso abutment, diameter 8.0 mm, height 13.4 mm, titanium
139
022.4321
RC Cementable abutment, diameter 5.0 mm, gingiva height 1.0 mm, abutment height 4.0 mm, titanium
140
022.4322
140
022.4323
140
022.4325
140
022.4326
140
022.4327
140
022.4331
140
022.4332
140
022.4333
140
022.4335
140
022.4336
140
022.4337
140
022.4410
RC Gold abutment, for crown, height 3.3 mm, Ceramicor ®/burn-out polymer
138
022.4430
RC Gold abutment, for bridge, height 5.2 mm, Ceramicor ®/burn-out polymer
138
022.4501
RC LOCATOR® abutment, height 1.0 mm, titanium alloy with TiN coating
155
022.4502
155
022.4503
155
022.4504
155
022.4505
155
022.4506
155
022.4701
RC Abutment for bars, gold, height 10.0 mm, Ceramicor ®158
022.4702
RC Abutment for bars, titanium, height 10.0 mm, titanium
160
022.4741
RC Multi-base abutment, straight, diameter 4.5 mm, gingiva height 1.0 mm, titanium alloy
143/158/160
022.4742
143/158/160
022.4744
143/158/160
022.4761
143/158/160
022.4762
143/158/160
022.4764
143/158/160
022.4782
RC Multi-base abutment, angled 25°, type A, diameter 4 mm, gingiva height 2.5 mm, titanium alloy
143/158/160
022.4786
RC Multi-base abutment, angled 25°, type B, diameter 4 mm, gingiva height 2.5 mm, titanium alloy
143/158/160
022.4812RC anatomic IPS e.max ® abutment, straight, gingiva height 2.0 mm, zirconium dioxide, MO 0
138
022.4814
RC anatomic IPS e.max ® abutment, straight, gingiva height 3.5 mm, zirconium dioxide, MO 0
138
022.4822
RC anatomic IPS e.max ® abutment, angled 15°, gingiva height 2.0 mm, zirconium dioxide, MO 0
138
022.4824
138
022.4832
138
022.4834
138
022.4842
138
022.4844
138
023.2310NC Coping, for bridge on cementable abutment, diameter 3.5 mm, burn-out polymer
132
023.2316NC Coping, for crown on cementable abutment, diameter 3.5 mm, burn-out polymer
132
023.2320NC Coping, for bridge on cementable abutment, diameter 5.0 mm, burn-out polymer
132
023.2326NC Coping, for crown on cementable abutment, diameter 5.0 mm, burn-out polymer
132
023.2701NC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®/burn-out polymer
135
023.2702NC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®150
023.2704NC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, burn-out polymer
135
023.2706NC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, titanium
152
023.2731NC Coping, for bridge on multi-base abutment, straight, diameter 3.5 mm, Ceramicor ®/burn-out polymer
135
023.2732NC Coping, for bar on multi-base abutment, straight, diameter 3.5 mm, Ceramicor ®150
023.2734NC Coping, for bridge on multi-base abutment, straight, diameter 3.5 mm, burn-out polymer
135
023.2736NC Coping, for bar on multi-base abutment, straight, diameter 3.5 mm, titanium
152
023.2741NC Coping, for bridge on multi-base abutment, straight, diameter 4.5 mm, Ceramicor ®/burn-out polymer
135
173
INDEX
Numerical Index
174
023.2742NC Coping, for bar on multi-base abutment, straight, diameter 4.5 mm, Ceramicor ®150
023.2744NC Coping, for bridge on multi-base abutment, straight, diameter 4.5 mm, burn-out polymer
135
023.2746NC Coping, for bar on multi-base abutment, straight, diameter 4.5 mm, titanium
152
023.4320
RC Coping, for bridge on cementable abutment, diameter 5.0 mm, burn-out polymer
142
023.4326
RC Coping, for crown on cementable abutment, diameter 5.0 mm, burn-out polymer
142
023.4330
142
023.4336
142
023.4701
RC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®/burn-out polymer
145
023.4702
RC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®158
023.4704
RC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, burn-out polymer
145
023.4706
RC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, titanium
160
023.4741
RC Coping, for bridge on multi-base abutment, straight, diameter 4.5 mm, Ceramicor ®/burn-out polymer
145
023.4742
RC Coping, for bar on multi-base abutment, straight, diameter 4.5 mm, Ceramicor ®158
023.4744
RC Coping, for bridge on multi-base abutment, straight, diameter 4.5 mm, burn-out polymer
145
023.4746
RC Coping, for bar on multi-base abutment, straight, diameter 4.5 mm, titanium
160
023.4761
145
023.4762
023.4764
145
023.4766
160
024.2100-04NC Closure screw, height 0.0 mm, titanium
40/41
024.2105-04NC Closure screw, height 0.5 mm, titanium
40/41
024.2222NC Healing abutment, conical shape, diameter 3.6 mm, height 2.0 mm, titanium
40/41
40/41
40/41
024.2234NC Healing abutment, bottle shape, diameter 3.3 mm, height 3.5 mm, titanium
40/41
024.2236NC Healing abutment, bottle shape, diameter 3.3 mm, height 5.0 mm, titanium
40/41
40/41
40/41
40/41
024.2270NC Healing abutment, customizable, diameter 5.0 mm, polymer
40/41
024.2306-04NC Protective cap, for multi-base abutment, angled 25°, diameter 4.0 mm, polymer
134
024.2307NC Temporary coping, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium
134
024.2312-04NC Protective cap, for cementable abutment, diameter 3.5 mm, abutment height 4.0 mm, polymer
131
131
131
131
024.2331-04NC Protective cap, for multi-base abutment, straight, diameter 3.5 mm, polymer
134
024.2332NC Temporary coping, for multi-base abutment, straight, diameter 3.5 mm, titanium
134
134
134
024.2346NC Temporary coping, for cementable abutment, diameter 3.5 mm, polymer
131
131
024.2370NC Temporary abutment, diameter 5.0 mm, height 12.0 mm, polymer/titanium alloy
128
024.2371NC Temporary abutment, for crown, diameter 3.5 mm, height 11.0 mm, titanium alloy
128
024.2375NC Temporary abutment, for bridge, diameter 3.5 mm, height 11.0 mm, titanium alloy
128
024.4100-04 RC Closure screw, height 0.0 mm, titanium
42/43
42/43
024.4222
RC Healing abutment, conical shape, diameter 4.5 mm, height 2.0 mm, titanium
42/43
024.4224
42/43
024.4226
42/43
024.4234
RC Healing abutment, bottle shape, diameter 4.4 mm, height 4.0 mm, titanium
42/43
024.4236
RC Healing abutment, bottle shape, diameter 4.7 mm, height 6.0 mm, titanium
42/43
024.4242
42/43
024.4244
42/43
024.4246
42/43
024.4270
RC Healing abutment, customizable, diameter 7.0 mm, polymer
42/43
024.4306-04 RC Protective cap, for multi-base abutment, angled 25°, diameter 4.0 mm, polymer
144
024.4307
RC Temporary coping, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium
144
024.4322-04 RC Protective cap, for cementable abutment, diameter 5.0 mm, abutment height 4.0 mm, polymer
141
141
141
141
024.4341-04 RC Protective cap, for multi-base abutment, straight, diameter 4.5 mm, polymer
146
024.4342
RC Temporary coping, for multi-base abutment, straight, diameter 4.5 mm, titanium
144
024.4356
RC Temporary coping, for cementable abutment, diameter 5.0 mm, polymer
141
024.4361-04 RC Protective cap, for multi-base abutment, straight, diameter 6.5 mm, polymer
144
024.4362
144
024.4366
141
024.4370
RC Temporary abutment, diameter 7.0 mm, height 12.0 mm, polymer/titanium alloy
137
024.4371
RC Temporary abutment, for crown, diameter 4.5 mm, height 11.0 mm, titanium alloy
137
Numerical Index
INDEX
024.4375
RC Temporary abutment, for bridge, diameter 4.5 mm, height 11.0 mm, titanium alloy
137
025.0120-04LOCATOR® female analog, length 10.0 mm, Ø 5.0 mm, aluminum
149/157
025.0900-04 NC/RC Occlusal screw, for coping on multi-base abutment only, 133/135/136/145/146/151/153/154/159/161/162
length 4.5 mm, titanium alloy
025.0911-04NC/RC Stabilization pin, for bar on multi-base abutment, length 16.0 mm, stainless steel
151/154/159/162
025.2101NC Implant analog, length 12.0 mm, titanium
128
025.2106NC Implant analog, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
134
025.2112NC Implant analog, for cementable abutment, diameter 3.5 mm, abutment height 4.0 mm, titanium alloy
131
131
131
131
025.2131NC Implant analog, for multi-base abutment, straight, diameter 3.5 mm, titanium alloy
134
134
025.2201NC Impression post, for closed tray, with guide screw and cap, length 12.3 mm, titanium alloy/polymer
128
025.2202NC Impression post, for open tray, short, with guide screw, length 16.5 mm, titanium alloy
128
025.2203-04NC Impression cap, for cementable abutment, diameter 3.5 mm, abutment height 4.0 mm, polymer
131
131
025.2205NC Impression post, for open tray, long, with guide screw, length 24.0 mm, titanium alloy
128
025.2206NC Impression post, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
134
025.2208-04NC Bite registration aid, height 8.0 mm, polymer
128
025.2212-04NC Bite registration aid, height 12.0 mm, polymer
128
131
025.2231-04NC Impression cap, for multi-base abutment, straight, diameter 3.5 mm, polymer
134
025.2232NC Impression post, for multi-base abutment, straight, diameter 3.5 mm, titanium alloy
134
134
134
025.2601-04NC PLAN Anatomic abutment, straight, gingiva height 2.0 mm, polymer
122
122
025.2603-04NC PLAN Anatomic abutment, angled 15°, gingiva height 2.0 mm, polymer
122
122
025.2610-04NC PLAN Gold abutment, for crown, height 3.2 mm, polymer
122
025.2611-04NC PLAN Cementable abutment, diameter 3.5 mm, gingiva height 1.0 mm, abutment height 4.0 mm, polymer
123
123
123
123
123
123
123
123
123
123
123
123
025.2642-04NC PLAN LOCATOR® abutment, height 2.0 mm, polymer
126
126
126
126
126
025.2651-04NC PLAN Multi-base abutment, straight, diameter 3.5 mm, gingiva height 1.0 mm, polymer
125
125
125
125
125
125
025.2662-04NC PLAN Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
025.2665-04NC PLAN Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
025.2900NC Basal screw, length 7.9 mm, titanium alloy
127/128/129/136/151/153/154
025.2903NC Wax-up sleeve, for single use, length 15.2 mm, polymer
127
025.2903-04NC Wax-up sleeve, for single use, length 15.2 mm, polymer
127
025.2905Straumann® NC Scanbody, includes fixation screw, length 11.7 mm, polymer
127
025.2906NC Basal screw, for ceramic abutment only, length 8.9 mm, titanium alloy
127/129
025.2908NC Basal screw, for cementable abutment only, length 7.9 mm, titanium alloy
132
025.2911-04NC Transfer aid, for cementable abutment, diameter 3.5 mm, polymer
132
132
025.2920NC Polishing aid, length 16.0 mm, stainless steel
129/136/154
025.2920-04NC Polishing aid, length 16.0 mm, stainless steel
129/136/154
025.4101
RC Implant analog, length 12.0 mm, titanium
137
025.4106
RC Implant analog, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
144
025.4122
RC Implant analog, for cementable abutment, diameter 6.5 mm, abutment height 4.0 mm, titanium alloy
141
025.4126
141
175
INDEX
Numerical Index
176
025.4132
141
025.4136
141
025.4141
RC Implant analog, for multi-base abutment, straight, diameter 4.5 mm, titanium alloy
144
025.4161
RC Implant analog, for multi-base abutment, straight, diameter 6.5 mm, titanium alloy
144
025.4201
RC Impression post, for closed tray, with guide screw and cap, length 12.3 mm, titanium alloy/polymer
137
025.4202
RC Impression post, for open tray, short, with guide screw, length 16.5 mm, titanium alloy
137
025.4203-04 RC Impression cap, for cementable abutment, diameter 5.0 mm, abutment height 4.0 mm, polymer
141
141
025.4205
RC Impression post, for open tray, long, with guide screw, length 24.0 mm, titanium alloy
137
025.4206
RC Impression post, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
144
025.4208-04 RC Bite registration aid, height 8.0 mm, polymer
137
137
141
141
025.4241-04 RC Impression cap, for multi-base abutment, straight, diameter 4.5 mm, polymer
144
025.4242
RC Impression post, for multi-base abutment, straight, diameter 4.5 mm, titanium alloy
144
025.4261-04 RC Impression cap, for multi-base abutment, straight, diameter 6.5 mm, polymer
144
025.4262
RC Impression post, for multi-base abutment, straight, diameter 6.5 mm, titanium alloy
144
025.4601-04 RC PLAN Anatomic abutment, straight, gingiva height 2.0 mm, polymer
122
025.4602-04 RC PLAN Anatomic abutment, straight, gingiva height 3.5 mm, polymer
122
025.4603-04 RC PLAN Anatomic abutment, angled 15°, gingiva height 2.0 mm, polymer
122
025.4604-04 RC PLAN Anatomic abutment, angled 15°, gingiva height 3.5 mm, polymer
122
025.4610-04 RC PLAN Gold abutment, for crown, height 3.3 mm, polymer
122
025.4621-04 RC PLAN Cementable abutment, diameter 5.0 mm, gingiva height 1.0 mm, abutment height 4.0 mm, polymer
124
124
124
124
124
124
025.4630-04 RC PLAN Gold abutment, for bridge, height 5.2 mm, polymer
122
124
124
124
124
124
124
025.4641-04 RC PLAN LOCATOR® abutment, height 1.0 mm, polymer
126
126
126
126
126
126
025.4651-04 RC PLAN Multi-base abutment, straight, diameter 4.5 mm, gingiva height 1.0 mm, polymer
125
125
125
125
125
125
025.4662-04 RC PLAN Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
025.4665-04 RC PLAN Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
025.4900
RC Basal screw, length 7.9 mm, titanium alloy
127/137/139/146/159/161/162
025.4902
RC Basal screw, for gold abutment, for bridge only, length 8.3 mm, titanium alloy
139/146
025.4903
RC Wax-up sleeve, for single use, length 18.8 mm, polymer
127
025.4903-04 RC Wax-up sleeve, for single use, length 18.8 mm, polymer
127
025.4905Straumann® RC Scanbody, includes fixation screw, length 13.4 mm, polymer
127
025.4906
RC Basal screw, for ceramic abutment only, length 8.2 mm, titanium alloy
127/139
025.4908
RC Basal screw, for cementable abutment only, length 7.9 mm, titanium alloy
142/146
025.4912-04 RC Transfer aid, for cementable abutment, diameter 5.0 mm, polymer
142
025.4913-04 RC Transfer aid, for cementable abutment, diameter 6.5 mm, polymer
142
025.4920
RC Polishing aid, length 16.0 mm, stainless steel
139/146/162
025.4920-04 RC Polishing aid, length 16.0 mm, stainless steel
139/146/162
026.0101CrossFit ® PLAN set, 278 x 124 x 33 mm, polymer
122
026.0901
Bone Level implant distance indicator, length 100.0 mm, titanium/stainless steel
14/66/67/72
026.0991
Grommets for Straumann surgical cassette, for Bone Level implant instruments, silicone
64/67/70/71
026.2303
BL Profile drill, short, Ø 3.3 mm, length 26.0 mm, stainless steel
58/65/66/67/70/71
026.2306
BL Profile drill, long, Ø 3.3 mm, length 35.0 mm, stainless steel
58/65/66/67/70/71
026.2310
BL/TE Tap for adapter, Ø 3.3 mm, length 23.0 mm, stainless steel/polymer
55/58/66/67/68/69/70
026.2503
BL Profile drill, guided, Ø 3.3 mm, length 37.0 mm, stainless steel
49/72
026.2510
BL/TE Tap for handpiece, guided, Ø 3.3 mm, length 42.0 mm, stainless steel
49/72
026.2801NC Guiding cylinder, for explantation of Ø 3.3 mm Bone Level implants, Ø 3.6 mm, length 10.7 mm, stainless steel
76
Numerical Index
INDEX
026.4303
59/65/66/67/70/71
026.4306
59/65/66/67/70/71
026.4310
56/59/66/67/68/69/70
026.4503
49/72
026.4510
49/72
026.4801
RC Guiding cylinder, for explantation of Ø 4.1 mm Bone Level implants, Ø 4.2 mm, length 10.9 mm, stainless steel
76
026.6303
60/65/66/67/70/71
026.6306
60/65/66/67/70/71
026.6310
57/60/66/67/68/69/70
026.6503
49/72
026.6510
49/72
026.6801
RC Guiding cylinder, for explantation of Ø 4.8 mm Bone Level implants, Ø 4.9 mm, length 10.9 mm, stainless steel
76
027.4301NC Cementable All-In-One Set, D3.5, AH4, GH1, crown
132
132
132
027.4307NC Cementable All-In-One Set, D5, AH4, GH1, crown
132
132
132
027.4310NC Cementable All-In-One Set, D5, AH5.5, GH1, crown
132
132
132
027.4313RC Cementable All-In-One Set, D5, AH4, GH1, crown
142
142
142
027.4316RC Cementable All-In-One Set, D5, AH5.5, GH1, crown
142
142
142
027.4319RC Cementable All-In-One Set, D6.5, AH4, GH1, crown
142
142
142
027.4322RC Cementable All-In-One Set, D6.5, AH5.5, GH1, crown
142
142
142
033.030S
Standard Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 6.0 mm, titanium
16/22
033.031G Standard Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
22
033.031S
16/22
22
033.032S
16/22
033.033G Standard Guided Implant Ø 4.1 mm , Regular Neck Ø 4.8 mm, SLActive ® 12.0 mm, titanium
22
033.033S
16/22
033.034S
16/22
033.035S
16/22
033.050S
Standard Plus Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 6.0 mm, titanium
16/29
033.051G Standard Plus Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
29
033.051S
16/29
29
033.052S
16/29
29
033.053S
16/29
033.054S
16/29
033.131S
16/20
033.132S
16/20
033.133S
16/20
033.134S
16/20
033.135S
16/20
033.151S
16/27
033.152S
16/27
033.153S
16/27
033.154S
16/27
033.230S
16/23
033.231S
16/23
033.232S
16/23
033.233S
16/23
033.234S
16/23
033.250S
16/30
30
033.251S
16/30
30
033.252S
16/30
30
177
INDEX
Numerical Index
178
033.253S
033.254S
033.431G 033.431S 033.432G 033.432S
033.433G 033.433S
033.434S
033.435S
033.451G 033.451S 033.452G 033.452S
033.453G 033.453S
033.454S
033.630S
033.631S
033.632S
033.633S
033.650S
033.651S
033.652S
033.653S
033.712S
033.713S
033.714S
033.721S
033.722S
033.723S
033.724S
033.751S 033.752S
033.753S
033.754S
033.761G 033.761S
033.762G 033.762S
033.763G 033.763S
033.764S
033.951S
033.952S
033.953S
033.954S
034.001
034.005
034.006 034.010 034.011 034.012 034.050V4
034.052V4
034.053V4
034.055V4
034.056-04
034.057
034.058-04
034.059
034.060
034.061
034.062-03
034.064-03
034.066
034.069V5
034.123
034.126
034.129
Standard Guided Roxolid Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Standard Roxolid® Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Standard Plus Guided Roxolid Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Standard Plus Roxolid® Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Standard Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLActive ® 6.0 mm, titanium
Standard Plus Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLActive ® 6.0 mm, titanium
Tapered Effect Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLActive ® 10.0 mm, titanium
Tapered Effect Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
Tapered Effect Roxolid® Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Tapered Effect Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
Tapered Effect Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 10.0mm titanium
Standard Plus Implant Ø 3.3 mm, Narrow Neck Ø 3.5 mm, SLActive ® 8.0 mm, titanium
Surgical cassette, for Straumann® Guided Surgery, length 290.0 mm, width 175.0 mm, height 62.0 mm, plastic
Connector for ratchet, stainless steel
Stop key for guided implants, stainless steel
Mucosa punch, Ø 3.5 mm, length 29.0 mm, stainless steel
Mucosa punch, Ø 4.0 mm, length 29.0, mm, stainless steel
Sleeve, Ø 5.0 mm, height 5.0 mm, stainless steel
T-sleeve, Ø 5.0 mm, height 5.0 mm, stainless steel
Closing lid for sleeve positioner, for Ø 2.8 mm sleeves
Sleeve positioner for gonyX, for Ø 2.8 mm sleeves
Closing Lid for sleeve positioner, for Ø 5.0 mm sleeves
Stepped drill for Ø 2.8 mm sleeves, Ø 2.8 mm, Ø 3.8 mm, Ø 4.6 mm
templiX reference plate
Reference pin for templiX reference plate
gonyX™ drill set
Girrback Splitex® Counter plate
Pilot drill, short, guided, Ø 2.2 mm, length 32.0 mm, stainless steel
Pilot drill, long, guided, Ø 2.2 mm, length 36.0 mm, stainless steel
Pilot drill, extra-long, guided, Ø 2.2 mm, length 40.0 mm, stainless steel
16/30
16/30
21
18/21
21
18/21
21
18/21
18/21
18/21
28
18/28
28
18/28
28
18/28
18/28
16/24
16/24
16/24
16/24
16/31
16/31
16/31
16/31
16/37
16/37
16/37
16
16
16
16
18/35
18/35
18/35
18/35
36
16/36
36
16/36
36
16/36
16/36
16/26
16/26
16/26
16/26
51/72
50/72
50/72
50/72
50/72
50/72
12/51
12/51
12/51
12/51
11
11
11
11
12
12
12
11
11
12
48/72
48/72
48/72
Numerical Index
INDEX
034.150
Drill handle, Ø 2.2 mm, 1.0 mm/3.0 mm stop, stainless steel
50/72
034.215
Milling cutter, guided, Ø 2.8 mm, length 32.5 mm, stainless steel
48/72
034.223
Twist drill PRO, short, guided, Ø 2.8 mm, length 32.0 mm, stainless steel
48/72
034.226
Twist drill PRO, long, guided, Ø 2.8 mm, length 36.0 mm, stainless steel
48/72
034.229
Twist drill PRO, extra-long, guided, Ø 2.8 mm, length 40.0 mm, stainless steel
48/72
034.235
SP Profile drill, guided, Ø 3.3 mm, RN, length 35.0 mm, stainless steel
49/72
034.237
TE Profile drill, guided, Ø 3.3 mm, RN, length 37.0 mm, stainless steel
49/72
034.245
S/SP Tap for handpiece, guided, Ø 3.3 mm, length 42.0 mm, stainless steel
49/72
034.250
50/72
034.255
Template fixation pin, guided, Ø 5.0 mm/2.8 mm, stainless steel
50/72
034.256
50/72
034.415
48/72
034.423
48/72
034.426
48/72
034.429
48/72
034.435
49/72
034.437
49/72
034.445
49/72
034.450
50/72
034.455
50/72
034.615
48/72
034.623
48/72
034.626
48/72
034.629
48/72
034.645
49/72
034.650
50/72
034.655
50/72
034.750
C-handle H2, stainless steel
50/72
034.751
50/72
034.752
50/72
040.165Straumann® surgical cassette, includes screw container 041.047, without instruments, length 290.0 mm, 64/66/67/68/69/70
width 175.0 mm, height 62.0 mm, plastic
040.175 Ultrasonic cleaning cassette, 150 x 65 x 25 mm, plastic/silicone
64/66/67
040.185
Prosthetic cassette for instruments and auxiliary components, complete (but without dividers), 224 x 115 x 20 mm, anodized aluminum 82/85
040.195
Bar set gold, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
104
2 x RN synOcta® gold coping, bar, 048.204, 4 x SCS Occlusal screw, 048.350
040.196
Bar set titanium, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
105
2 x RN synOcta® titanium coping, bar, 048.214, 2 x SCS Occlusal screw, 048.350
040.197
Bar set plastic, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
105
2 x RN synOcta® plastic coping, bar, 048.227, 2 x SCS Occlusal screw, 048.350
040.360
Screwdriver complete with screwdriver blade and screw-holding device for implant screws, crosshead Ø 1.5 mm,
5
length 160.0 mm, aluminum, stainless steel
040.380 Impression set for 4.0 mm, WN Solid abutment, green
119
040.381 Impression set for 4.0 mm, RN Solid abutment, yellow 117
040.382 Impression set for 7.0 mm, RN Solid abutment, blue
117
040.383 Impression set for 5.5, RN Solid abutment, grey
117
040.384 Impression set for 5.5 mm, WN Solid abutment, brown
119
040.440S
Drill set, short, drill stop compatible for Ø 3.3 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, 46
length 33.0 mm, stainless steel
040.441S
Drill set, long, drill stop compatible for Ø 3.3 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, 46
040.443S
Drill set, short, drill stop compatible for Ø 4.1 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, Ø 3.5 mm,
46
040.444S
Drill set, long, drill stop compatible for Ø 4.1 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, Ø 3.5 mm,
46
040.446S
46
Ø 4.2 mm, length 33.0 mm, stainless steel
040.447S
46
040.454S
Refill package, Drill stop set, type A, for short drill 12.0 mm/long drill 16.0 mm, Ø 3.3/4.1/4.8 mm implants
12/47/48/49/50/51
040.455S
Refill package, Drill stop set, type B, for short drill 10.0 mm/long drill 14.0 mm, Ø 3.3/4.1/4.8 mm implants
47
040.456S
Refill package, Drill stop set, type C, for short drill 8.0 mm/long drill 12.0 mm, Ø 3.3/4.1/4.8 mm implants
47
040.457S
Refill package, Drill stop set, type D, for short drill 6.0 mm/long drill 10.0 mm, Ø 3.3/4.1/4.8 mm implants
12/47/48/49/50/51
040.460
Drill stop kit, 3 x drill stop set, type A, 3 x drill stop set, type B, 3 x drill stop set, type C, 3 x drill stop set, 12/47/48/49/50/51
type D, 1 x drill, stop aid
040.461
Drill stop aid
47
040.500Osteotome instrument kit for bone condensation, kit contains: stainless steel/plastic
73
040.501Osteotome instrument kit for partial sinus floor elevation, kit contains: stainless steel/plastic
74
040.740 RN Solid All-In-One set, 4.0 mm, for crown, titanium, plastic 116
040.741 RN Solid All-In-One set, 5.5 mm, for crown, titanium, plastic 116
179
INDEX
Numerical Index
180
040.742 RN Solid All-In-One set, 7.0 mm, for bridge, titanium, plastic 116
040.745 WN Solid All-In-One set, 4.0 mm, for crown, titanium, plastic 119
040.746 WN Solid All-In-One set, 5.5 mm, for crown, titanium, plastic 119
040.845 WN Solid All-In-One set, 4.0 mm, for bridge, titanium, plastic 119
040.846 WN Solid All-In-One set, 5.5 mm, for bridge, titanium, plastic 119
041.032Straumann® Bone Block Fixation, cassette for drills, mini-screws and screw-driver for bone block fixation, 130 x 118 x 25 mm, thermo-plastic 5
041.047
Screw container, with lid, for Straumann surgical cassette, without screws, length 69.0 mm, width 47.0 mm, height 29.0 mm, plastic
64
041.412
Calibration cup, yellow, Ø 80.0 mm, anodized aluminum
82
041.440
Dish for tray 041.211, 56.0 x 31.0 x 11.0 mm, anodized aluminum
82
041.500
Storage system for implants (SLA® & SLActive ®) incl. drawers and dividers, 226.0 x 280.0 x 248.0 mm, polymer
64
041.501
Storage system for prosthetics incl. drawers and dividers, 226.0 x 280.0 x 248.0 mm, polymer
82
041.612
Divider, large, for dish 041.440, 47.5 x 9.5 x 1.0 mm, anodized aluminum
82/85
041.615
Divider, small, for dish 041.440, 22.5 x 9.5 x 1.0 mm, anodized aluminum
82/85
042.700V5
Crosshead, mini-screw, Ø 1.5 mm, length 8.0 mm, titanium
5
042.701V5
5
042.702V5
5
042.703V5
5
042.930S
Standard Plus Implant Ø 3.3 mm, Narrow Neck Ø 3.5 mm, SLA® 8.0 mm, titanium
17/26
042.931S
17/26
042.932S
17/26
042.933S
17/26
043.030S
Standard Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLA® 6.0 mm, titanium
17/22
043.031S
17/22
043.032S
17/22
043.033S
17/22
043.034S
17/22
043.035S
17/22
043.050S
Standard Plus Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLA® 6.0 mm, titanium
17/29
043.051S
17/29
043.052S
17/29
043.053S
17/29
043.054S
17/29
043.131S
17/20
043.132S
17/20
043.133S
17/20
043.134S
17/20
043.135S
17/20
043.151S
17/27
043.152S
17/27
043.153S
17/27
043.154S
17/27
043.230S
17/23
043.231S
17/23
043.232S
17/23
043.233S
17/23
043.234S
17/23
043.250S
17/30
043.251S
17/30
043.252S
17/30
043.253S
17/30
043.254S
17/30
043.630S
Standard Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLA® 6.0 mm, titanium
17/24
043.631S
17/24
043.632S
17/24
043.633S
17/24
043.650S
Standard Plus Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLA® 6.0 mm, titanium
17/31
043.651S
17/31
043.652S
17/31
043.653S
17/31
043.712S
Tapered Effect Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLA® 10.0 mm, titanium
17/37
043.713S
17/37
043.714S
17/37
043.721S
Tapered Effect Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLA® 8.0 mm, titanium
17
043.722S
17
043.723S
17
043.724S
17
043.761S
17/36
Numerical Index
INDEX
043.762S
17/36
043.763S
17/36
043.764S
17/36
044.003
Round bur, Ø 2.3 mm, stainless steel
52/53/54/55/56/57/58/59/60/66/67/68/69/70
044.004
52/53/54/55/56/57/58/59/60/66/67/68/69/70
044.022
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
044.084
SP Profile drill, short, Ø 4.2 mm, WN, length 25.0 mm, stainless steel
54/65/66/67/68/69/71
044.085
SP Profile drill, long, Ø 4.2 mm, WN, length 34.0 mm, stainless steel
54/65/66/67/68/69/71
044.086
SP Profile drill, short, Ø 2.8 mm, RN, length 25.0 mm, stainless steel
52/65/66/67/68/69/71
044.087
SP Profile drill, long, Ø 2.8 mm, RN, length 34.0 mm, stainless steel
52/65/66/67/68/69/71
044.088
53/65/66/67/68/69/71
044.089
53/65/66/67/68/69/71
044.125
Glide hole drill, Ø 1.5 mm, length 37.0 mm, Stop 20.0 mm, stainless steel
5
044.126
Residual ridge drill, Ø 1.25 mm, length 37.0 mm, Stop 16.0 mm, stainless steel
5
044.210
Pilot drill 1, short, Ø 2.2 mm, length 33.0 mm, stainless steel
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
044.211
Pilot drill 1, long, Ø 2.2 mm, length 41.0 mm, stainless steel
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
044.214
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
044.215
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
044.250
Twist drill PRO, short, Ø 3.5 mm, length 33.0 mm, stainless steel
53/54/56/57/59/60/65/66/67/68/69/70
044.251
Twist drill PRO, long, Ø 3.5 mm, length 41.0 mm, stainless steel
53/54/56/57/59/60/65/66/67/68/69/70
044.254
54/57/60/65/66/67/68/69/70
044.255
54/57/60/65/66/67/68/69/70
044.304
Bone profile drill RN, for use with 049.082 inside Ø 3.6 mm/4.8 mm, outside Ø 5.4 mm, length 28.0 mm, stainless steel61/66/67/68/69/71
044.305
Bone profile drill WN, for use with 049.082, inside Ø 3.6 mm/6.5 mm, outside Ø 7.2 mm, length 25.0 mm, stainless steel61/66/67/68/69/71
044.330Explantation drill, short, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
044.331Explantation drill, medium, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
044.332Explantation drill, long, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
044.340Explantation drill, short, for Straumann dental implants Ø 4.1 mm, inside Ø 4.2 mm, outside Ø 4.8 mm, length 32.0 mm, stainless steel
75
044.341Explantation drill, medium, for Straumann dental implants Ø 4.1 mm, inside Ø 4.2 mm, outside Ø 4.8 mm, length 37.5 mm, stainless steel 75
044.342Explantation drill, long, for Straumann dental implants Ø 4.1 mm, inside Ø 4.2 mm, outside Ø 4.8 mm, length 40.5 mm, stainless steel
75
75
044.346Explantation drill, long, for Straumann dental implants Ø 4.8 mm, inside, Ø 4.9 mm, outside Ø 5.5 mm, length 40.5 mm, stainless steel
75
044.570
Tap for TS, M2 x 0.25 mm, stainless steel
84/93/95/98/100/101/118/120
044.575
S/SP Tap for adapter, Ø 3.3 mm, length 23.0 mm, stainless steel/polymer
52/67/69/71
044.577
53/67/69/71
044.579
54/67/69/71
044.590
S/SP Tap for ratchet, short, Ø 3.3 mm, length 30.0 mm, stainless steel
52/66/68/71
044.591
S/SP Tap for ratchet, long, Ø 3.3 mm, length 34.0 mm, stainless steel
52/66/68/71
044.592
53/66/68/71
044.593
53/66/68/71
044.594
54/66/68/71
044.595
54/66/68/71
044.701
TE Profile drill, short, Ø 2.8 mm, RN, length 28.0 mm, stainless steel
55/65/66/67/68/69/71
044.703
TE Profile drill, short, Ø 4.2 mm, WN, length 28.0 mm, stainless steel
57/65/66/67/68/69/71
044.705
56/65/66/67/68/69/71
044.708
TE Profile drill, long, Ø 2.8 mm, RN, length 37.0 mm, stainless steel
55/65/66/67/68/69/71
044.710
TE Profile drill, long, Ø 4.2 mm, WN, length 37.0 mm, stainless steel
57/65/66/67/68/69/71
044.712
56/65/66/67/68/69/71
045.111V4
Cleaning brush for ratchet, length 100.0 mm, Ø 4.5 mm, stainless steel/nylon
62/66/67/84
045.921
Light curette for implants (5 per pack)
63
046.049
Torque control device for ratchet, length 82.0 mm, stainless steel
62/66/67/68/69/70/72/85
046.057
Tweezers without titanium plasma-coated tips, length 115.0 mm, stainless steel
62
046.064
Holding key, length 85.0 mm, stainless steel
62/66/67/68/69/70/72/83/85
046.067
Solid abutment driver for RN Solid abutments 6°, short, length 13.0 mm, stainless steel
83/85/116
046.068
Solid abutment driver for RN Solid abutments 6°, long, length 19.0 mm, stainless steel
83/85/116
046.069
Retentive anchor driver, length 19.0 mm, stainless steel
83/85/107
046.085 Screwdriver handle for 046.410/411/412, length 109.0 mm, stainless steel/PEEK
83
046.095
Tweezers with titanium plasma-coated tips, length 115.0 mm, stainless steel/titanium
62/66/67/72/85
046.108
Service instrument for ratchet, length 50.0 mm, stainless steel
62/83
046.110
Instrument tweezers, length 140.0 mm, stainless steel
62
046.119
Ratchet, includes service instrument, length 84.0 mm, stainless steel
62/66/67/68/69/70/72/83/85
046.147
Diagnostic T, length 65.0 mm, width 33.0 mm, titanium
14/66/67/85
046.148
Standard, Standard Plus and Tapered Effect implant distance indicator, length 100.0 mm, titanium/stainless steel
14/66/67/72
046.150
Activator set for all bar matrices, three-part, length 50.0 mm, stainless steel
104/151/159
046.151
Deactivator for Dolder ® bar matrices, mini, length 66.0 mm, brass, chromeplated/polymer
104/151/159
046.152
Deactivator for Dolder ® bar matrices, regular, length 66.0 mm, brass, chrome plated/polymer
104/151/159
181
Numerical Index
INDEX
046.154
046.239
182
Screwdriver, length 37.0 mm, stainless steel
84/107
Analog holder, length 105.0 mm, 84/93/95/98/100/101/106/118/120/128/129/132/135/136/137/139/142/145/146/154/162
aluminum/steel
046.240
Handle for 046.241/242/243/244/246/247 and 044.570, length 65.0 mm, steel/brass
84/93/95/98/100/101/118/120
046.241synOcta® guide pin for reamer 046.243, length 50.0 mm, stainless steel
84/93/95/98/100/101/118/120
046.242
Guide pin for reamer 046.243, for RN Solid abutments, length 50.0 mm, stainless steel
84/118
046.243
Reamer for 45° shoulders, Ø 8.0 mm, stainless steel/Ti-N
84/93/95/100/101/118/120
046.244
Guide pin for reamer 046.243, for WN Solid abutments, length 50.0 mm, stainless steel
84/120
046.245
Polishing protector for RN synOcta® copings, transocclusal screw-retained, length 15.0 mm, stainless steel
93/106
046.246synOcta® guide pin for reamer 046.243, for 048.662, 048.663, length 50.0 mm, stainless steel
84/95
046.247synOcta® guide pin for reamer 046.243, for 048.606, length 50.0 mm, stainless steel
84/101
046.256
Screwdriver blade for implant screws, crosspoint Ø 1.5 mm, length 69.0 mm, stainless steel
5
046.257
Screw-holding device for screwdriver blade 046.256, length 45.0 mm, stainless steel
5
046.258
Screwdriver handle for screwdriver blade 046.256, length 100.0 mm, aluminum, stainless steel
5
046.400
SCS Screwdriver for ratchet, extra short, length 15.0 mm, stainless steel
63/66/67/68/69/70/83/85
046.401
SCS Screwdriver for ratchet, short, length 21.0 mm, stainless steel
63/66/67/68/69/70/72/83/85
046.402
SCS Screwdriver for ratchet, long, length 27.0 mm, stainless steel
63/83
046.410
SCS Screwdriver for handpiece, extra short, length 20.0 mm, stainless steel
63/67/69/83
046.411
SCS Screwdriver for handpiece, short, length 26.0 mm, stainless steel
63/67/69/72/83
046.412
SCS Screwdriver for handpiece, long, length 32.0 mm, stainless steel
63/83
046.413V4 LOCATOR® abutment holder sleeve, PSU
110/113/149/156
046.414LOCATOR® core tool tip
157
046.415LOCATOR® core tool, length 100.0 mm, stainless steel
83/85/110/113/149/157
046.416LOCATOR® driver short for ratchet, length 15.0 mm, stainless steel
83/85/110/113/149/157
046.417LOCATOR® driver long for ratchet, length 21.0 mm, stainless steel
83/110/113/149/157
046.420
TS Hexagonal screwdriver, length 24.0 mm, stainless steel
83/98
046.421
Hexagonal screwdriver, length 30.0 mm, stainless steel
26/63/83
046.450
Depth gauge, Ø 3.5 mm, length 26.0 mm, titanium
53/54/56/57/59/60/66/67/68/69/70
046.451
54/57/60/66/67/68/69/70
046.455
Depth gauge, with distance indicator, Ø 2.2/2.8 mm, length 27.0 mm, titanium
52/53/54/55/56/57/58/59/60/66/67/68/69/70
046.458
Alignment pin, Ø 2.2 mm, length 28.0 mm, titanium
52/53/54/55/56/57/58/59/60/66/67/68/69/70
046.460
Adapter for ratchet, extra short, length 11.0 mm, stainless steel
62/66/67/68/69/70
046.461
Adapter for ratchet, short, length 18.0 mm, stainless steel
62/66/67/68/69/70/72
046.462
Adapter for ratchet, long, length 28.0 mm, stainless steel
62
046.470
Adapter for handpiece, extra short, length 19.0 mm, stainless steel
62/67/69/70
046.471
Adapter for handpiece, short, length 26.0 mm, stainless steel
62/67/69/70/72
046.472
Adapter for handpiece, long, length 34.0 mm, stainless steel
62
046.500Osteotome, straight, for bone condensation, Ø 2.2 mm, stainless steel
73
73
73
73
046.510Osteotome, angled, for bone condensation, Ø 2.2 mm, stainless steel
73
73
73
73
046.521Osteotome, straight, for sinus floor elevation, Ø 2.8 mm, stainless steel
74
74
74
046.531Osteotome, angled, for sinus floor elevation, Ø 2.8 mm, stainless steel
74
74
74
046.550
Depth stop, Ø 2.2 mm, titanium/stainless steel
73
046.551
73/74
046.552
73/74
046.553
73/74
048.000V4
Transfer aid for RN synOcta® 15° and 20° angled abutments, short, height 4.0 mm, plastic
96
048.002V4
Transfer aid for RN synOcta® 15° and 20° angled abutments, long, height 5.5 mm, plastic
96
048.003V4
Transfer aid for RN synOcta® TS abutment, height 5.0 mm, plastic
98
048.010
RN synOcta® impression cap with integral guide screw, red, height 10.1 mm, aluminum/titanium
92
048.013
WN Impression cap, height 8.0 mm, plastic
99/119
048.016NN Impression cap with integral guide screw, length 17.5 mm, aluminum/titanium
91
048.017V4
RN Impression cap, height 8.0 mm, plastic
92/117
048.028
RN Healing cap, labial bevel, small, height 2.0 mm, titanium
27/28/29/30/34/35/36
048.029
RN Healing cap, labial bevel, large, height 3.5 mm, titanium
27/28/29/30/34/35/36
048.030
WN Healing cap, labial bevel, height 2.0 mm, titanium
24/31/37
048.032
Transfer aid for WN synOcta® 15° angled abutments, height 5.0 mm, plastic
102
048.033
RN Healing cap, height 2.0 mm, titanium
20/21/22/23/27/28/29/30/34/35/36
048.034
20/21/22/23/27/28/29/30/34/35/36
048.037
20/21/22/23/27/28/29/30/34/35/36
048.038
WN Healing cap, height 2.0 mm, titanium
24/31/37
Numerical Index
24/31/37
26/91
117
117
117
26/91
119
119
24/31/37
101
95
117
117
117
119
119
90
90
90
92
106
90
90
90
90
90
90
92
99
106
99
106
107
117
91
92/104/105
91
119
117
117
117
119
119
99
108
108
108
108
108
108
109/112/148/156
109/112/148/156
111
111
111
111
111
109/112/148/156
109/112/148/156
109/112/148/156
109/112/148/156
109/112/148/156
109/112/148/156
109/112/148/156
110/113/149/157
INDEX
048.039
048.043NN Healing cap with integral occlusal screw, height 3.4 mm, titanium/titanium alloy
048.047V4
RN Protective cap for 048.540, cementable, height 5.8 mm, PEEK
048.048V4
048.049V4
048.050NN Protective cap with integral occlusal screw, height 3.4 mm, polymer/titanium alloy
048.051
WN Protective cap for 048.545, height 6.0 mm, PEEK
048.052
048.053
048.054V4
Transfer aid for 048.606, height 6.5 mm, plastic
048.059V4
048.060V4
Positioning cylinder for 048.540, yellow, height 10.2 mm, plastic
048.061V4
Positioning cylinder for 048.541, grey, height 10.2 mm, plastic
048.062V4
Positioning cylinder for 048.542, blue, height 10.2 mm, plastic
048.065
Positioning cylinder for 048.545, green, height 10.0 mm, plastic
048.066
Positioning cylinder for 048.546, brown, height 10.0 mm, plastic
048.067Straumann® NN Scanbody, includes fixation screw, length 9.2 mm, polymer
048.068Straumann® RN Scanbody, includes fixation screw, length 8.5 mm, polymer
048.069Straumann® WN Scanbody, includes fixation screw, length 8.9 mm, polymer
048.070V4
RN synOcta® positioning cylinder, red, height 12.0 mm, plastic
048.073V4
Fixation pin for bars with 048.601, grey, length 5.0 mm, plastic
048.087NN Wax-up sleeve, for single use, length 15.0 mm, polymer
048.087-04NN Wax-up sleeve, for single use, length 15.0 mm, polymer
048.088
RN Wax-up sleeve, for single use, length 19.3 mm, polymer
048.088-04 RN Wax-up sleeve, for single use, length 19.3 mm, polymer
048.089
WN Wax-up sleeve, for single use, length 16.4 mm, polymer
048.089-04 WN Wax-up sleeve, for single use, length 16.4 mm, polymer
048.090
RN synOcta® impression cap with built-in handle, red, height 21.0 mm, aluminum/titanium
048.091
WN synOcta® impression cap with integral guide screw, height 10.0 mm, aluminum
048.093V4
RN synOcta® impression cap for bars with 048.601, one-part, grey, height 5.0 mm, plastic
048.095
WN synOcta® positioning cylinder, white, height 12.0 mm, plastic
048.108
RN synOcta® analog for bars with 048.601, one-part, length 11.5 mm, stainless steel
048.109
Transfer pin for retentive anchor, length 18.0 mm, stainless steel
048.117V4
Shoulder analog for RN Solid abutments, length 10.0 mm, with reinforcement pin, length 17.0 mm, plastic/brass
048.122V4NN Impression cap, snap-on, length 12.0 mm, plastic
048.124
RN synOcta® analog, grey with red stripe, length 12.0 mm, stainless steel
048.130NN Implant analog, length 14.0 mm, stainless steel
048.140
Shoulder analog for WN Solid abutments, length 10.0 mm, aluminum
048.160
Analog for 048.540, yellow, length 14.3 mm, aluminum
048.161
Analog for 048.541, grey, length 15.8 mm, aluminum
048.162
Analog for 048.542, blue, length 17.3 mm, aluminum
048.165
Analog for 048.545, green, length 16.0 mm, aluminum
048.166
Analog for 048.546, brown, length 17.5 mm, aluminum
048.171
WN synOcta® analog, grey, length 12.0 mm, stainless steel
048.175
RN LOCATOR® abutment, height 1.0 mm, titanium alloy/Ti-N
048.176
048.177
048.178
048.179
048.180
048.181V4 LOCATOR® replacement males, grey, 0 lbs retention, height 1.7 mm, nylon 048.182V2LOCATOR® male processing package, extended range, contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male (height 1.9 mm), block-out spacer (048.196), green replacement male (048.193),
orange replacement male (048.188), red replacement male (048.194), titanium/nylon
048.183
WN LOCATOR® abutment, height 1.0 mm, titanium alloy/Ti-N
048.184
048.185
048.186
048.187
048.188V4LOCATOR® replacement male, orange, light retention, extended range, 10°–10°, 2lbs, 0.91 kg, height 1.7 mm, nylon
048.189V2LOCATOR® male processing package, contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male
(height 1.9 mm), block-out spacer (048.196), white replacement male (048.190), pink replacement male (048.191),
blue replacement male (048.192), titanium/nylon
048.190V4LOCATOR® replacement male, clear, 0°–10°, 5 lbs, 2.27 kg, height 1.7 mm, nylon
048.191V4LOCATOR® replacement male, pink, light retention, 0°–10°, 3 lbs, 1.36 kg, height 1.7 mm, nylon
048.192V4LOCATOR® replacement male, blue, extra-light retention, 0°–10°, 1.5 lbs, 0.68 kg, height 1.7 mm, nylon
048.193V4LOCATOR® replacement male, green, extended range, 10°–20°, 3–4 lbs, 1.36–1.82 kg, height 1.7 mm, nylon
048.194V4LOCATOR® replacement male, red, extra-light retention, extended range, 10°–20°, 0.5–1.5 lbs, 0.23–0.68 kg, height 1.7 mm, nylon
048.195V4LOCATOR® black processing male, height 1.9 mm, LDPE
183
INDEX
Numerical Index
184
048.196V20LOCATOR® block-out spacer, thickness 0.4 mm, Teflon®110/113/149/157
048.197V4LOCATOR® impression coping, height 4.0 mm, aluminum housing with LDPE insert
110/113/149/157
048.199V4LOCATOR® parallel post, length 8.0 mm, LDPE
83/110/113/149/157
048.200LOCATOR® angle measurement guide, length 5.0 mm, width 15.0 mm, stainless steel
83/110/113/149/157/190
048.204
RN synOcta® gold coping for synOcta® 1.5, bar, height 6.0 mm, alloy weight 0.77 g, Ceramicor ®104
048.208V4
Stabilization pin for retaining gold copings in solder investment, length 11.0 mm, stainless steel
104
048.214
RN synOcta® titanium coping for synOcta® 1.5, bar, height 6.0 mm, titanium
105
048.218V4 LOCATOR® processing spacer, POM 110/113/149/156
048.227
RN synOcta® plastic coping for synOcta® 1.5, bridge/bar, height 10.0 mm, burn-out plastic
93/105
048.229
RN synOcta® plastic coping for synOcta® 1.5, crown, height 10.0 mm, burn-out plastic
93
048.233
WN synOcta® post for temporary restorations with integral guide screw, crown, height 9.0 mm, titanium
92/99
048.234
WN synOcta® post for temporary restorations with integral guide screw, bridge, height 9.0 mm, titanium
92/99
048.240
RN synOcta® milling cylinder for synOcta® 1.5, crown, Ø 6 mm, height 8.0 mm, titanium
94/114
048.241
RN synOcta® milling cylinder for synOcta® 1.5, bridge, Ø 6 mm, height 8.0 mm, titanium
94
048.243
WN synOcta® plastic coping for 048.606, crown, height 7.2 mm, burn-out plastic
101
048.244
WN synOcta® plastic coping for 048.606, bridge, height 7.3 mm, burn-out plastic
101
048.245
Plastic coping for RN Solid abutments, crown, height 10.0 mm, burn-out plastic
118
048.246
Plastic coping for RN Solid abutments, bridge, height 10.0 mm, burn-out plastic
118
048.247
Plastic coping for WN Solid abutments, crown, height 7.0 mm, burn-out plastic
120
048.248
Plastic coping for WN Solid abutments, bridge, height 7.0 mm, burn-out plastic
120
048.350V4
SCS Occlusal screw, length 4.4 mm, titanium
75/76/78/95/98/102/106/107/116
048.354
RN Occlusal screw (for ceramic only), length 5.0 mm, titanium alloy
90
048.356synOcta® basal screw, length 6.7 mm, titanium alloy
90/92/93/100
048.357synOcta® basal screw, length 6.7 mm, titanium alloy, for 048.644, 048.651, 048.560, 048.642
93/100
048.360V4
SCS Guide screw for RN synOcta® bar copings, cannot be shortened, length 6.0 mm, titanium
114
048.361V4
SCS Guide screw for RN synOcta® bar copings, can be shortened by 1.6 mm, length 6.0 mm, titanium
114
048.362V4
SCS Guide screw for 048.240/241, cannot be shortened, length 8.0 mm, titanium
94/114
048.363V4
SCS Guide screw for 048.240/241, can be shortened by 2.0 mm, length 8.0 mm, titanium
94/114
048.364V4
SCS Guide screw, can be shortened by 2.0 mm, length 10.0 mm, titanium
114
048.365V4
114
048.366V4
114
048.371V4
RN Closure screw, small, titanium
20/21/22/23/27/28/29/30/34/35/36
048.373V4
RN Closure screw, large, height 1.5 mm, titanium
20/21/22/23/27/28/29/30/34/35/36
048.374NN Closure screw with hex socket, height 1.8 mm, titanium
26/63/83
048.375
WN Closure screw, titanium
24/31/37
048.411Dolder ® bar, egg-shaped cross-section, mini, height 2.3 mm, length 25.0 mm, Elitor ®104/150/158
048.412Dolder ® bar, egg-shaped cross-section, regular, height 3.0 mm, length 25.0 mm, Elitor ®
104/150/158
048.413Dolder ® bar matrix includes spacer, mini, height 2.75 mm, length 25.0 mm, Elitor ®/brass
104/150/158
048.414Dolder ® bar matrix includes spacer, regular, height 3.5 mm, length 25.0 mm, Elitor ®/brass
104/150/158
048.439
Retentive anchor abutment, height 3.4 mm, titanium
107
048.450
Titanium matrix for retentive anchor, height 3.1 mm, titanium alloy
107
048.451V4
Spacer for titanium matrix, height 3.5 mm, plastic
107
048.452
Screwdriver for titanium matrix, length 50.0 mm, stainless steel
107
048.453Extractor for titanium matrix, length 100.0 mm, stainless steel
107
048.454V4
Threaded mounting ring for titanium matrix, height 2.2 mm, plastic
107
048.455V4
Spring for 048.450, stainless steel
107
048.456Elliptical matrix, includes lamella retention insert, height 3.2 mm, Ø 3.6 mm, Elitor ®/titanium84/107
048.457
Spare lamella retention insert, height 2.6 mm, Elitor ®107
048.500
NN Framework blank, can be trimmed, for the direct application of ceramic materials, height 9.0 mm, alloy weight 0.92 g, Estheticor® Cosmor H91
048.505NN Coping, can be trimmed, height 9.0 mm, titanium
91
048.540
RN Solid abutment 6°, yellow, height 4.0 mm, titanium
116/117
048.541
RN Solid abutment 6°, grey, height 5.5 mm, titanium
116/117
048.542
RN Solid abutment 6°, blue, height 7.0 mm, titanium
116/117
048.545
WN Solid abutment 6°, green, height 4.0 mm, titanium
119
048.546
WN Solid abutment 6°, brown, height 5.5 mm, titanium
107/119
048.550NN Coping, 15° angled, height 8.8 mm, titanium
91
91
048.560
RN synOcta® Meso abutment, height 10.0 mm, Ø 8.0 mm, titanium
93
048.561
WN synOcta® Meso abutment, height 10.0 mm, Ø 10.0 mm
100
048.601
RN synOcta® 1.5 screw-retained abutment, height 1.5 mm, titanium alloy
93/94/104/105/106
048.603
WN synOcta® 1.5 screw-retained abutment, height 1.5 mm, titanium
100
048.605
RN synOcta® cementable abutment, height 5.5 mm, titanium
95
048.606
WN synOcta® cementable abutment, height 5.5 mm, titanium
84/101
048.608
WN synOcta® 15° angled abutment, type A, height 5.5 mm A, titanium
102
048.609
WN synOcta® 15° angled abutment, type B, height 5.5 mm B, titanium
102
048.610
RN synOcta® 15° angled abutment, long, type A, height 6.7 mm A, titanium
96
048.611
RN synOcta® 15° angled abutment, long, type B, height 6.7 mm B, titanium
96
048.612
RN synOcta® 15° angled abutment, short, type A, height 5.7 mm A, titanium
96
048.613
RN synOcta® 15° angled abutment, short, type B, height 5.7 mm B, titanium
96
048.615
96
048.616
96
Numerical Index
048.617
048.618
048.620
048.632
INDEX
96
96
RN synOcta® transversal (TS), screw-retained abutment, height 4 mm, titanium
98
RN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), bridge, height 4.25 mm/12.0 mm, alloy weight 0.33 g,
93
Ceramicor ®/burn-out plastic
048.633
RN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), crown, height 4.25 mm/12.0 mm, alloy weight 0.36 g,
93
048.634
RN synOcta® TS gold coping, height 5.4 mm, alloy weight 0.96 g, Ceramicor ®98
048.635NN Gold coping, cast-on, height 10.0 mm, alloy weight 0.28 g, Ceramicor ®/burn-out plastic
91
048.638
WN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), bridge, height 4.75 mm/12.0 mm, alloy weight 0.86 g,
100
048.639
WN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), crown, height 4.75 mm/12.0 mm, alloy weight 0.87 g,
100
048.642
RN synOcta® gold abutment, crown (includes basal screw 048.356), height 4.3 mm, alloy weight 0.61 g, Ceramicor ®/burn-out plastic
93
048.644
WN synOcta® gold abutment, crown (includes basal screw 048.356), height 4.2 mm, alloy weight 0.78 g, Ceramicor ®/burn-out plastic 100
048.650
RN synOcta® post for temporary restorations with integral guide screw, bridge, height 9.0 mm, titanium
92/99
048.651
RN synOcta® post for temporary restorations with integral guide screw, crown, height 9.0 mm, titanium
92/99
048.654
RN Temporary coping for RN Solid abutments, bridge, height 8.5 mm, polymer
117
048.655
RN Temporary coping for RN Solid abutments, crown, height 8.5 mm, polymer
117
048.656
WN Temporary coping for WN Solid abutments, bridge, height 7.3 mm, polymer
119
048.657
WN Temporary coping for WN Solid abutments, crown, height 7.3 mm, polymer
119
048.662
RN synOcta® plastic coping for 048.605, bridge, height 7.0 mm, burn-out plastic
84/95
048.663
RN synOcta® plastic coping for 048.605, crown, height 7.0 mm, burn-out plastic
84/95
048.665
RN synOcta® TS plastic coping, height 5.4 mm, Ceramicor ®/burn-out plastic
98
048.666
WN synOcta® plastic coping, bridge, height 10.0 mm, burn-out plastic
100
048.667
WN synOcta® plastic coping, crown, height 10.0 mm, burn-out plastic
100
048.668
RN synOcta® temporary meso abutment, includes basal screw, height 10.0 mm, polymer/titanium alloy
92
048.669NN Temporary coping, includes NN Occlusal screw, height 10.0 mm, polymer/titanium alloy
91
048.670Extension shell for short and long, RN synOcta® 15° and 20° angled abutments, height 5.5 mm, burn-out plastic
96
048.672
RN synOcta® TS thread protection screw for 048.634 and 048.665, Ø 3.0 mm, length 8.2 mm, stainless steel
98
048.676V4
Plastic shoulder for short and long RN synOcta® 15° and 20° angled abutments, height 4.0 mm, burn-out plastic
96
048.678
Plastic shoulder for WN synOcta® 15° angled abutments, height 4 mm, burn-out plastic
102
048.901
Prosthetic planning kit, contents: 6 x 048.920, 048.929, 048.921, 048.916, 048.923,048.917, 048.918,
88
048.919, 048.922, 048.924, 048.925, 048.930, 048.931, 048.932, 048.933, 048.934, 048.926, 048.927, 048.928, 048.935,
048.936, 048.937, plastic
048.916V4
RN synOcta® 15° angled PLAN abutment, type A, 5.7 mm, plastic
88
048.917V4
RN synOcta® 15° angled PLAN abutment, type B, 5.7 mm, plastic
88
048.918V4
88
048.919V4
88
048.920V4
RN synOcta® PLAN abutment, plastic
88
048.921V4
RN synOcta® transversal PLAN abutment, plastic
88
048.922V4
88
048.923V4
88
048.924V4
88
048.925V4
88
048.926V4
RN PLAN Solid abutment, 4.0 mm, plastic
88
048.927V4
88
048.928V4
88
048.929V4
RN synOcta® 1.5 PLAN abutment, plastic
88
048.930V4
RN synOcta® Cementable PLAN abutment, plastic
88
048.931V4
WN synOcta® 1.5 PLAN abutment, plastic
88
048.932V4
WN synOcta® Cementable PLAN abutment, plastic
88
048.933V4
WN synOcta® 15° angled PLAN abutment, type A, plastic
88
048.934V4
WN synOcta® 15° angled PLAN abutment, type B, plastic
88
048.935V4NN PLAN coping, 9.0 mm, plastic
88
048.936V4NN angled PLAN coping 15°, plastic
88
88
048.940V4
Bite registration aid, short, Ø 5.0 mm, height 8.0 mm, plastic
92/99
048.941V4
Bite registration aid, long, Ø 5.0 mm, height 12.0 mm, plastic
92/99
049.071
RN Guiding sleeve for Straumann dental implants, Ø 4.1 mm and Ø 3.5 mm, cement and screw-retained, Ø 4.2 mm,
76
049.076V4
X-ray reference sphere, Ø 5.0 mm, stainless steel
14
049.082
SCS Guiding cylinder, Ø 3.6 mm, length 10.5 mm, stainless steel
61/66/67/68/69/71/76
049.083
SCS Guiding cylinder, for Straumann dental implants, Ø 4.1 mm, Ø 4.2 mm, length 10.5 mm, stainless steel
76
049.154
Transversal screw for 048.620, Ø 2.0 mm, length 3.0 mm, titanium alloy
98
049.167
76
049.177NN Occlusal screw, length 5.0 mm, titanium alloy
90/91
049.181
SCS Occlusal screw, long, length 7.6 mm, titanium alloy
76/92/99
185
Numerical Index
INDEX
for screw-retaining of 049.071, 049.850 and 049.851 on an octa or cone abutment 15°
for 048.650/048.651 & 048.233/048.234
049.182
SCS Guiding cylinder, for Straumann dental implants, Ø 3.3 mm Narrow Neck, Ø 3.6 mm, length 5.0 mm, titanium/stainless steel
76
049.810V4
Drill sleeve with collar, height 10.0 mm, outside Ø 3.5 mm, inside Ø 2.4 mm, titanium
12/15/48/49/50/51
049.816V4
Pin for 049.810V4, height 16.0 mm, Ø 2.2 mm, titanium
15
049.817V4
15
049.818V4
Stepped pin for 049.810V4, height 16.0 mm, Ø 2.2/3.5 mm, titanium
15
049.819V4
15
049.850
RN Guiding sleeve for Straumann dental implants, Ø 3.3 mm, cement and screw-retained, Ø 3.6 mm, length 4.5 mm, stainless steel
76
049.851
76
070.203Straumann® BoneCeramic 400–700, Granule size: 400–700 microns, Unit size: 0.25 g, Volume: approx. 0.3 ml
4
4
070.205Straumann® BoneCeramic 500–1000, Granule size: 500–1000 microns, Unit size: 1 g, Volume: approx. 1.9 ml
4
070.212 Straumann® AlloGraft OCAN, 250-1000 microns, Unit size: 0.5 cc
3
3
3
3
3
3
070.218
Straumann AlloGraft GC, 250-1000 microns, Unit size: 0.25 cc
3
070.219
3
070.220
3
070.221
3
070.222
Straumann AlloGraft DGC, 250-1000 microns, Unit size: 0.25 cc
3
070.223
3
070.224
3
070.225
3
070.226
Straumann AlloGraft C/C mix, 250-1000 microns, Unit size 0.5 cc
4
070.227
4
070.228
4
070.229
Straumann AlloGraft OCAN, 250-1000 microns, Unite size 0.25 cc
3
075.113
Straumann ® Emdogain 0.3 ml, multipack incl. Straumann ® PrefGel 2
075.115
Straumann ® Emdogain 0.7 ml, multipack incl. Straumann ® PrefGel2
075.203Straumann® PrefGel 0.6 ml, 5 x Straumann® PrefGel 0.6 ml ready-to-use syringe
2
140.019Straumann® Standard Plus (NN) Implant, consisting of: NN Standard Plus Implant, NN Healing cap with integr. occlusal screw,
164
NN Impression cap, NN Protective cap with integr. occlusal screw, NN Analog, NN Framework blank, NN Titanium abutment coping,
SCS Screwdriver, plastic box, metal, plastic
140.024synOcta® system, consisting of: Standard Plus Implant, RN Impression cap, RN synOcta® positioning cylinder,
164
RN synOcta® analog, RN synOcta® abutment, SCS Screwdriver, RN synOcta® gold coping with plastic crown, SCS Occlusal screw,
plastic box, metal, plastic
140.032
Lower jaw, edentulous, with two implants (S Ø 4.1 mm, RN), plastic, acrylic glass, titanium
164
140.033
Upper jaw, two single-tooth gaps and unilateral free-end saddle, with 4 implants:
164
1 x Standard Plus Implant Ø 3.3 mm, NN, 1 x Standard Implant Ø 4.8 mm, WN, 1 x Standard Implant Ø 4.1 mm, RN,
1 x Standard Implant Ø 4.8 mm, RN, plastic, acrylic glass, titanium
140.049
Lower jaw, edentulous, with 4 implants (S Ø 4.1 mm, RN), plastic, acrylic glass, titanium
164
140.055
Plexiglass cassette/Membranette, length 150.0 mm, width 100.0 mm, plastic
82
140.062Straumann® Tapered Effect Implant, Ø 4.1 mm, RN, SLA® 10.0 mm, cardboard box, stainless steel
164
150.215
X-ray templates for Standard and Standard Plus implants, plastic
14
150.216
X-ray templates for Bone Level implants, plastic
14
150.230
X-ray templates for Tapered Effect implants, plastic
14
174.020V5SmartpegTM Type 17 for NN (delivered sterile, disposable)
80
174.021V5SmartpegTM Type 4 for RN and WN (delivered sterile, disposable)
80
174.155V5SmartpegTM Type 41 for NC (Bone Level, delivered sterile, disposable)
80
174.156V5SmartpegTM Type 42 for RC (Bone Level, delivered sterile, disposable)
80
186
INDEX
187
Alphabetical Index
046.150
046.470
046.472
046.471
046.460
046.462
046.461
046.458
048.160
048.161
048.162
048.165
048.166
046.239
Activator set for all bar matrices, three-part, length 50.0 mm, stainless steel
104/151/159
Adapter for handpiece, extra short, length 19.0 mm, stainless steel
62/67/69/70
Adapter for handpiece, long, length 34.0 mm, stainless steel
62
Adapter for handpiece, short, length 26.0 mm, stainless steel
62/67/69/70/72
Adapter for ratchet, extra short, length 11.0 mm, stainless steel
62/66/67/68/69/70
Adapter for ratchet, long, length 28.0 mm, stainless steel
62
Adapter for ratchet, short, length 18.0 mm, stainless steel
62/66/67/68/69/70/72
Alignment pin, Ø 2.2 mm, length 28.0 mm, titanium
52/53/54/55/56/57/58/59/60/66/67/68/69/70
Analog for 048.540, yellow, length 14.3 mm, aluminum
117
Analog for 048.541, grey, length 15.8 mm, aluminum
117
Analog for 048.542, blue, length 17.3 mm, aluminum
117
Analog for 048.545, green, length 16.0 mm, aluminum
119
Analog for 048.546, brown, length 17.5 mm, aluminum
119
Analog holder, length 105.0 mm, 84/93/95/98/100/101/106/118/120/128/129/132/135/136/137/139/142/145/146/154/162
aluminum/steel
040.195
Bar set gold, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
2 x RN synOcta® gold coping, bar, 048.204, 4 x SCS Occlusal screw, 048.350
Bar set plastic, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
2 x RN synOcta® plastic coping, bar, 048.227, 2 x SCS Occlusal screw, 048.350
Bar set titanium, includes 2 x RN synOcta® 1.5 abutment, 048.601, 2 x RN synOcta® analog, 048.124,
2 x RN synOcta® titanium coping, bar, 048.214, 2 x SCS Occlusal screw, 048.350
Bite registration aid, long, Ø 5.0 mm, height 12.0 mm, plastic
Bite registration aid, short, Ø 5.0 mm, height 8.0 mm, plastic
Bone Level Guided Implant Ø 4.1 mm, Regular CrossFit, SLActive ® 8.0 mm, titanium
Bone Level Implant Ø 3.3 mm, Narrow CrossFit ®, SLActive ® 8.0 mm, titanium
Bone Level Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 14.0 mm titanium
Bone Level implant distance indicator, length 100.0 mm, titanium/stainless steel
040.197
INDEX
040.196
188
048.941V4
048.940V4
026.2503
026.4503
026.6503
026.2306
026.4306
026.6306
026.2303
026.4303
026.6303
026.2310
026.4310
026.6310
026.2510
026.4510
026.6510
021.4108G 021.4110G 021.4112G 021.6108G 021.6110G 021.6112G 021.2408
021.2410
021.2412
021.2414
021.2108
021.2110
021.2112
021.2114
021.4408
021.4410
021.4412
021.4414
021.4108
021.4110
021.4112
021.4114
021.6408
021.6410
021.6412
021.6414
021.6108
021.6110
021.6112
021.6114
026.0901
104
105
105
92/99
92/99
49/72
49/72
49/72
58/65/66/67/70/71
59/65/66/67/70/71
60/65/66/67/70/71
58/65/66/67/70/71
59/65/66/67/70/71
60/65/66/67/70/71
55/58/66/67/68/69/70
56/59/66/67/68/69/70
57/60/66/67/68/69/70
49/72
49/72
49/72
42
42
42
43
43
43
17/40
17/40
17/40
17/40
12/38
16/40
16/40
16/40
17/42
17/42
17/42
17/42
16/42
16/42
16/42
16/42
17/43
17/43
17/43
17/43
16/43
16/43
16/43
16/43
14/66/67/72
Alphabetical Index
021.2208 021.2210
021.2212
021.2214
044.304
044.305
Bone Level Roxolid® Implant Ø 3.3 mm, Narrow CrossFit, SLActive ® 8.0 mm, TiZr
41/18
41/18
41/18
41/18
Bone profile drill RN, for use with 049.082 inside Ø 3.6 mm/4.8 mm, outside Ø 5.4 mm, length 28.0 mm, stainless steel 61/66/67/68/69/71
Bone profile drill WN, for use with 049.082, inside Ø 3.6 mm/6.5 mm, outside Ø 7.2 mm, length 25.0 mm, stainless steel 61/66/67/68/69/71
034.750
034.751
034.752
041.412
Calibration cup, yellow, Ø 80.0 mm, anodized aluminum
045.111V4
Cleaning brush for ratchet, length 100.0 mm, Ø 4.5 mm, stainless steel/nylon
034.005
Connector for ratchet, stainless steel
034.056-04 Closing lid for sleeve positioner, for Ø 2.8 mm sleeves
034.058-04 Closing Lid for sleeve positioner, for Ø 5.0 mm sleeves
019.0373
coDiagnostiX 8 coDoctor
019.0370
coDiagnostiX 8 PPP
019.0371
coDiagnostiX 8 PPG
019.0372
019.0374
coDiagnostiX 8 unit
026.0101CrossFit ® PLAN set, 278 x 124 x 33 mm, polymer
042.700V5
042.701V5
042.702V5
042.703V5
50/72
50/72
50/72
82
62/66/67/84
50/72
11
11
10
10
10
10
10
122
5
5
5
5
046.151
Deactivator for Dolder ® bar matrices, mini, length 66.0 mm, brass, chromeplated/polymer
104/151/159
046.152
Deactivator for Dolder ® bar matrices, regular, length 66.0 mm, brass, chrome plated/polymer
104/151/159
046.450
53/54/56/57/59/60/66/67/68/69/70
046.451
54/57/60/66/67/68/69/70
046.455
Depth gauge, with distance indicator, Ø 2.2/2.8 mm, length 27.0 mm, titanium
52/53/54/55/56/57/58/59/60/66/67/68/69/70
046.550
73
046.551
73/74
046.552
73/74
046.553
73/74
046.147
Diagnostic T, length 65.0 mm, width 33.0 mm, titanium
14/66/67/85
041.440
Dish for tray 041.211, 56.0 x 31.0 x 11.0 mm, anodized aluminum
82
041.612
Divider, large, for dish 041.440, 47.5 x 9.5 x 1.0 mm, anodized aluminum
82/85
041.615
Divider, small, for dish 041.440, 22.5 x 9.5 x 1.0 mm, anodized aluminum
82/85
048.411Dolder ® bar, egg-shaped cross-section, mini, height 2.3 mm, length 25.0 mm, Elitor ®104/150/158
048.412Dolder ® bar, egg-shaped cross-section, regular, height 3.0 mm, length 25.0 mm, Elitor ®104/150/158
048.413Dolder ® bar matrix includes spacer, mini, height 2.75 mm, length 25.0 mm, Elitor ®/brass104/150/158
048.414Dolder ® bar matrix includes spacer, regular, height 3.5 mm, length 25.0 mm, Elitor ®/brass104/150/158
034.150
50/72
034.250
50/72
034.450
50/72
034.650
50/72
040.441S
Drill set, long, drill stop compatible for Ø 3.3 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, 46
040.444S
46
040.447S
46
040.440S
Drill set, short, drill stop compatible for Ø 3.3 mm implant, single-patient use, sterile, Ø 2.2 mm, Ø 2.8 mm, 46
040.443S
46
040.446S
46
049.810V4
Drill sleeve with collar, height 10.0 mm, outside Ø 3.5 mm, inside Ø 2.4 mm, titanium
12/15/48/49/50/51
040.461
Drill stop aid
47
040.460
Drill stop kit, 3 x drill stop set, type A, 3 x drill stop set, type B, 3 x drill stop set, type C, 3 x drill stop set, 12/47/48/49/50/51
type D, 1 x drill, stop aid
INDEX
048.456
Elliptical matrix, includes lamella retention insert, height 3.2 mm, Ø 3.6 mm, Elitor ®/titanium84/107
044.330Explantation drill, short, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
75
75
044.331Explantation drill, medium, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
189
Alphabetical Index
044.332Explantation drill, long, for Straumann dental implants Ø 3.3 mm and Ø 3.5 mm, inside Ø 3.6 mm, outside Ø 4.2 mm,
75
044.342Explantation drill, long, for Straumann dental implants Ø 4.1 mm, inside Ø 4.2 mm, outside Ø 4.8 mm, length 40.5 mm, stainless steel
75
044.346Explantation drill, long, for Straumann dental implants Ø 4.8 mm, inside, Ø 4.9 mm, outside Ø 5.5 mm, length 40.5 mm, stainless steel
75
048.453Extractor for titanium matrix, length 100.0 mm, stainless steel
107
048.670Extension shell for short and long, RN synOcta ® 15° and 20° angled abutments, height 5.5 mm, burn-out plastic
96
048.073V4
Fixation pin for bars with 048.601, grey, length 5.0 mm, plastic
044.125
Glide hole drill, Ø 1.5 mm, length 37.0 mm, Stop 20.0 mm, stainless steel
034.069V5
Girrback Splitex® Counter plate
019.0201gonyX™
034.066
gonyX drill set
026.0991
Grommets for Straumann surgical cassette, for Bone Level implant instruments, silicone
046.242
Guide pin for reamer 046.243, for RN Solid abutments, length 50.0 mm, stainless steel
046.244
Guide pin for reamer 046.243, for WN Solid abutments, length 50.0 mm, stainless steel
046.240
046.421
046.064
Handle for 046.241/242/243/244/246/247 and 044.570, length 65.0 mm, steel/brass
Hexagonal screwdriver, length 30.0 mm, stainless steel
Holding key, length 85.0 mm, stainless steel
040.381 040.380 040.383 040.384 040.382 046.110
Impression set for 4.0 mm, RN Solid abutment, yellow Impression set for 4.0 mm, WN Solid abutment, green
Impression set for 5.5 mm, RN Solid abutment, grey
Impression set for 5.5 mm, WN Solid abutment, brown
Impression set for 7.0 mm, RN Solid abutment, blue
Instrument tweezers, length 140.0 mm, stainless steel
106
5
12
11
11
64/67/70/71
84/118
84/120
84/93/95/98/100/101/118/120
26/63/83
62/66/67/68/69/70/72/83/85
117
119
117
119
117
62
INDEX
045.921
Light curette for implants (5 per pack)
63
046.413V4 LOCATOR® abutment holder sleeve, PSU
110/113/149/156
048.200LOCATOR® angle measurement guide, length 5.0 mm, width 15.0 mm, stainless steel
83/110/113/149/157/190
048.195V4LOCATOR® black processing male, height 1.9 mm, LDPE
110/113/149/157
048.196V20LOCATOR® block-out spacer, thickness 0.4 mm, Teflon®110/113/149/157
046.415LOCATOR® core tool, length 100.0 mm, stainless steel
83/85/110/113/149/157
046.414LOCATOR® core tool tip
157
046.417LOCATOR® driver long for ratchet, length 21.0 mm, stainless steel
83/110/113/149/157
046.416LOCATOR® driver short for ratchet, length 15.0 mm, stainless steel
83/85/110/113/149/157
025.0120-04LOCATOR® female analog, length 10.0 mm, Ø 5.0 mm, aluminum
149/157
048.197V4LOCATOR® impression coping, height 4.0 mm, aluminum housing with LDPE insert
110/113/149/157
048.189V2LOCATOR® male processing package, contents: denture cap (Ø 5.5 mm, height 2.5 mm) with black processing male
109/112/148/156
(height 1.9 mm), block-out spacer (048.196), white replacement male (048.190), pink replacement male (048.191),
blue replacement male (048.192), titanium/nylon
048.182V2LOCATOR® male processing package, extended range, contents: denture cap (Ø 5.5 mm, height 2.5 mm) 109/112/148/156
with black processing male (height 1.9 mm), block-out spacer (048.196), green replacement male (048.193),
orange replacement male (048.188), red replacement male (048.194), titanium/nylon
048.199V4LOCATOR® parallel post, length 8.0 mm, LDPE
83/110/113/149/157
048.218V4 LOCATOR® processing spacer, POM 112/115/151/158
048.192V4LOCATOR® replacement male, blue, extra-light retention, 0°–10°, 1.5 lbs, 0.68 kg, height 1.7 mm, nylon
109/112/148/156
048.190V4LOCATOR® replacement male, clear, 0°–10°, 5 lbs, 2.27 kg, height 1.7 mm, nylon
109/112/148/156
048.193V4LOCATOR® replacement male, green, extended range, 10°–20°, 3–4 lbs, 1.36–1.82 kg, height 1.7 mm, nylon
109/112/148/156
048.181V4 LOCATOR® replacement male, grey, 0 lbs retention, height 1.7 mm, nylon 109/112/148/156
048.188V4LOCATOR® replacement male, orange, light retention, extended range, 10°–10°, 2lbs, 0.91 kg, height 1.7 mm, nylon
109/112/148/156
048.191V4LOCATOR® replacement male, pink, light retention, 0°–10°, 3 lbs, 1.36 kg, height 1.7 mm, nylon
109/112/148/156
048.194V4LOCATOR® replacement male, red, extra-light retention, extended range, 10°–20°, 0.5–1.5 lbs, 0.23–0.68 kg, 109/112/148/156
height 1.7 mm, nylon
140.032
164
140.049
164
190
034.215
034.415
034.615
034.010 034.011 034.012 Milling cutter, guided, Ø 2.8 mm, length 32.5 mm, stainless steel
Mucosa punch, Ø 4.0 mm, length 29.0, mm, stainless steel
48/72
48/72
48/72
50/72
50/72
50/72
022.2701
NC Abutment for bars, gold, height 10.0 mm, Ceramicor ®150
022.2702NC Abutment for bars, titanium, height 10.0 mm, titanium
152
Alphabetical Index
Anatomic abutment, angled 15°, gingiva height 2.0 mm, titanium
129
Anatomic abutment, angled 15°, gingiva height 3.5 mm, titanium
129
Anatomic abutment, straight, gingiva height 2.0 mm, titanium
129
Anatomic abutment, straight, gingiva height 3.5 mm, titanium
129
Anatomic IPS e.max Abutment, angled 15°, gingiva height 2.0 mm, zirconium dioxide, MO 0
129
129
129
129
Anatomic IPS e.max Abutment, straight, gingiva height 2.0 mm, zirconium dioxide, MO 0
129
129
129
Anatomic IPS e.max Abutment, straight, gingiva height 3.5, zirconium dioxide, MO 1
129
Basal screw, for cementable abutment only, length 7.9 mm, titanium alloy
132
Basal screw, for ceramic abutment only, length 8.9 mm, titanium alloy
127/129
Basal screw, length 7.9 mm, titanium alloy
127/128/129/136/151/153/154
Bite registration aid, height 8.0 mm, polymer
128
Bite registration aid, height 12.0 mm, polymer
128
Cementable abutment, diameter 3.5 mm, gingiva height 1.0 mm, abutment height 4.0 mm, titanium
130
130
130
132
130
130
130
130
130
130
130
130
Cementable All-In-One Set, D3.5, AH4, GH1, crown
132
132
132
Cementable All-In-One Set, D5, AH4, GH1, crown
132
132
132
Cementable All-In-One Set, D5, AH5.5, GH1, crown
132
132
132
Closure screw, height 0.0 mm, titanium
40/41
Closure screw, height 0.5 mm, titanium
40/41
Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®150
Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, titanium
152
Coping, for bar on multi-base abutment, straight, diameter 3.5 mm, Ceramicor ®150
Coping, for bar on multi-base abutment, straight, diameter 3.5 mm, titanium
152
152
Coping, for bridge on cementable abutment, diameter 3.5 mm, burn-out polymer
132
Coping, for bridge on cementable abutment, diameter 5.0 mm, burn-out polymer
132
Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, burn-out polymer
135
Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®/burn-out polymer
135
Coping, for bridge on multi-base abutment, straight, diameter 3.5 mm, burn-out polymer
135
Coping, for bridge on multi-base abutment, straight, diameter 3.5 mm, Ceramicor ®/burn-out polymer
135
135
135
Coping, for crown on cementable abutment, diameter 3.5 mm, burn-out polymer
132
Coping, for crown on cementable abutment, diameter 5.0 mm, burn-out polymer
132
Gold abutment, for crown, height 3.2 mm, Ceramicor ®/burn-out polymer
129
Guiding cylinder, for explantation of Ø 3.3 mm Bone Level implants, Ø 3.6 mm, length 10.7 mm, stainless steel
76
Healing abutment, bottle shape, diameter 3.3 mm, height 3.5 mm, titanium
40/41
40/41
Healing abutment, conical shape, diameter 3.6 mm, height 2.0 mm, titanium
40/41
40/41
40/41
40/41
40/41
40/41
Healing abutment, customizable, diameter 5.0 mm, polymer
40/41
Implant analog, for cementable abutment, diameter 3.5 mm, abutment height 4.0 mm, titanium alloy
131
131
131
INDEX
022.2152NC
022.2154NC
022.2102NC
022.2104NC
022.2822NC
022.2842NC
022.2824NC
022.2844NC
022.2812NC
022.2832NC
022.2814NC
022.2834NC
025.2908NC
025.2906NC
025.2900NC
025.2208-04NC
025.2212-04NC
022.2311NC
022.2315NC
022.2312NC
022.2316NC
022.2313NC
022.2317NC
022.2321NC
022.2325NC
022.2322NC
022.2326NC
022.2323NC
022.2327NC
027.4301NC
027.4302NC
027.4303NC
027.4307NC
027.4308NC
027.4309NC
027.4310NC
027.4311NC
027.4312NC
024.2100-04NC
024.2105-04NC
023.2702NC
023.2706NC
023.2732NC
023.2736NC
023.2742NC
023.2746NC
023.2310NC
023.2320NC
023.2704NC
023.2701NC
023.2734NC
023.2731NC
023.2744NC
023.2741NC
023.2316NC
023.2326NC
022.2410NC
026.2801NC
024.2234NC
024.2236NC
024.2222NC
024.2224NC
024.2226NC
024.2242NC
024.2244NC
024.2246NC
024.2270NC
025.2112NC
025.2116NC
025.2122NC
191
INDEX
Alphabetical Index
192
131
025.2106NC Implant analog, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
134
134
134
025.2101NC Implant analog, length 12.0 mm, titanium
128
025.2201NC Impression post, for closed tray, with guide screw and cap, length 12.3 mm, titanium alloy/polymer
128
025.2202NC Impression post, for open tray, short, with guide screw, length 16.5 mm, titanium alloy
128
131
131
131
134
134
025.2206NC Impression post, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
134
134
134
025.2205NC Impression post, for open tray, long, with guide screw, length 24.0 mm, titanium alloy
128
147
147
147
147
147
022.2202NC Meso abutment, diameter 6.0 mm, height 13.4 mm, titanium
129
022.2782NC Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, titanium alloy
135/152/154
022.2786NC Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, titanium alloy
135/152/154
133/150/152
133/150/152
135/152/154
135/152/154
135/152/154
135/152/154
122
122
122
122
025.2610-04NC PLAN Gold abutment, for crown, height 3.2 mm, polymer
122
123
123
123
123
123
123
123
123
123
123
123
123
126
126
126
126
126
025.2662-04NC PLAN Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
025.2665-04NC PLAN Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
125
125
125
125
125
125
025.2920NC Polishing aid, length 16.0 mm, stainless steel
129/136/154
025.2920-04NC Polishing aid, length 16.0 mm, stainless steel
129/136/154
131
131
131
131
024.2306-04NC Protective cap, for multi-base abutment, angled 25°, diameter 4.0 mm, polymer
134
134
134
025.0900-04 NC/RC Occlusal screw, for coping on multi-base abutment only, 133/135/136/145/146/153/154/159/161/162
Alphabetical Index
length 4.5 mm, titanium alloy
025.0911-04NC/RC Stabilization pin, for bar on multi-base abutment, length 16.0 mm, stainless steel
151/154/159/162
024.2370NC Temporary abutment, diameter 5.0 mm, height 12.0 mm, polymer/titanium alloy
128
024.2375NC Temporary abutment, for bridge, diameter 3.5 mm, height 11.0 mm, titanium alloy
128
024.2371NC Temporary abutment, for crown, diameter 3.5 mm, height 11.0 mm, titanium alloy
128
131
131
024.2307NC Temporary coping, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium
134
134
134
132
132
025.2903NC Wax-up sleeve, for single use, length 15.2 mm, polymer
127
025.2903-04NC Wax-up sleeve, for single use, length 15.2 mm, polymer
127
90
90
048.374NN Closure screw with hex socket, height 1.8 mm, titanium
26/63/83
91
91
048.505NN Coping, can be trimmed, height 9.0 mm, titanium
91
048.500
NN Framework blank, can be trimmed, for the direct application of ceramic materials, height 9.0 mm, alloy weight 0.92 g, Estheticor® Cosmor H91
048.635NN Gold coping, cast-on, height 10.0 mm, alloy weight 0.28 g, Ceramicor ®/burn-out plastic
91
048.043NN Healing cap with integral occlusal screw, height 3.4 mm, titanium/titanium alloy
26/91
048.122V4NN Impression cap, snap-on, length 12.0 mm, plastic
91
048.016NN Impression cap with integral guide screw, length 17.5 mm, aluminum/titanium
91
048.130NN Implant analog, length 14.0 mm, stainless steel
91
049.177NN Occlusal screw, length 5.0 mm, titanium alloy
90/91
048.935V4NN PLAN coping, 9.0 mm, plastic
90
048.050NN Protective cap with integral occlusal screw, height 3.4 mm, polymer/titanium alloy
26/91
048.669NN Temporary coping, includes NN Occlusal screw, height 10.0 mm, polymer/titanium alloy
91
048.087NN Wax-up sleeve, for single use, length 15.0 mm, polymer
90
048.087-04NN Wax-up sleeve, for single use, length 15.0 mm, polymer
90
019.0212NSK handpiece for gonyX
11
019.0216NSK control unit NA
11
046.510
Osteotome, angled, for bone condensation, Ø 2.2 mm, stainless steel
040.500Osteotome instrument kit for bone condensation, kit contains: stainless steel/plastic
040.501Osteotome instrument kit for partial sinus floor elevation, kit contains: stainless steel/plastic
Pilot drill, extra-long, guided, Ø 2.2 mm, length 40.0 mm, stainless steel
48/72
Pilot drill, long, guided, Ø 2.2 mm, length 36.0 mm, stainless steel
48/72
Pilot drill, short, guided, Ø 2.2 mm, length 32.0 mm, stainless steel
48/72
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
15
15
15
Plastic coping for RN Solid abutments, crown, height 10.0 mm, burn-out plastic
118
Plastic coping for RN Solid abutments, bridge, height 10.0 mm, burn-out plastic
118
Plastic coping for WN Solid abutments, crown, height 7.0 mm, burn-out plastic
120
Plastic coping for WN Solid abutments, bridge, height 7.0 mm, burn-out plastic
120
Plastic shoulder for short and long RN synOcta® 15° and 20° angled abutments, height 4.0 mm, burn-out plastic
96
Plastic shoulder for WN synOcta® 15° angled abutments, height 4 mm, burn-out plastic
102
Plexiglass cassette/Membranette, length 150.0 mm, width 100.0 mm, plastic
82
Polishing protector for RN synOcta® copings, transocclusal screw-retained, length 15.0 mm, stainless steel
93/106
INDEX
034.129
034.126
034.123
044.211
044.210
044.215
044.214
049.816V4
049.817V4
049.819V4
048.245
048.246
048.247
048.248
048.676V4
048.678
140.055
046.245
73
73
73
73
74
74
74
73
73
73
73
74
74
74
73
74
193
Alphabetical Index
INDEX
048.060V4
048.061V4
048.062V4
048.065
048.066
040.185
048.901
194
Positioning cylinder for 048.540, yellow, height 10.2 mm, plastic
117
Positioning cylinder for 048.541, grey, height 10.2 mm, plastic
117
Positioning cylinder for 048.542, blue, height 10.2 mm, plastic
117
Positioning cylinder for 048.545, green, height 10.0 mm, plastic
119
Positioning cylinder for 048.546, brown, height 10.0 mm, plastic
119
Prosthetic cassette for instruments and auxiliary components, complete (but without dividers), 224 x 115 x 20 mm, anodized aluminum 82/85
Prosthetic planning kit, contents: 6 x 048.920, 048.929, 048.921, 048.916, 048.923,048.917, 048.918,
88
048.919, 048.922, 048.924, 048.925, 048.930, 048.931, 048.932, 048.933, 048.934, 048.926, 048.927, 048.928, 048.935,
048.936, 048.937, plastic
046.119
Ratchet, includes service instrument, length 84.0 mm, stainless steel
62/66/67/68/69/70/72/83/85
022.4701
RC Abutment for bars, gold, height 10.0 mm, Ceramicor ®158
022.4702
RC Abutment for bars, titanium, height 10.0 mm, titanium
160
022.4102
139
022.4104
139
022.4152
139
022.4154
139
022.4822
RC Anatomic IPS e.max ® abutment, angled 15°, gingiva height 2.0 mm, zirconium dioxide, MO 0
138
022.4842
138
022.4824
138
022.4844
138
022.4812
RC Anatomic IPS e.max ® abutment, straight, gingiva height 2.0 mm, zirconium dioxide, MO 0
138
022.4832
138
022.4814
138
022.4834
138
025.4905
RC Scanbody, includes fixation screw, length 13.4 mm, polymer
127
025.4906
RC Basal screw, for ceramic abutment only, length 8.2 mm, titanium alloy
127/139
025.4908
RC Basal screw, for cementable abutment only, length 7.9 mm, titanium alloy
142/146
025.4900
RC Basal screw, length 7.9 mm, titanium alloy
127/137/139/146/159/161/162
025.4902
RC Basal screw, for gold abutment, for bridge only, length 8.3 mm, titanium alloy
139/146
137
137
142
027.4314
RC Cementable All-In-One Set, D5, AH4, GH2, crown
142
027.4315
RC Cementable All-In-One Set, D5, AH4, GH3, crown
142
027.4316
RC Cementable All-In-One Set, D5, AH5.5, GH1, crown
142
027.4317
142
027.4318
142
027.4319
RC Cementable All-In-One Set, D6.5, AH4, GH1, crown
142
027.4320
142
027.4321
142
027.4322
RC Cementable All-In-One Set, D6.5, AH5.5, GH1, crown
142
027.4323
142
027.4324
142
022.4321
140
022.4322
140
022.4323
140
022.4325
140
022.4326
140
022.4327
140
022.4331
140
022.4332
140
022.4333
140
022.4335
140
022.4336
140
022.4337
140
42/43
42/43
023.4320
142
023.4326
142
023.4330
142
023.4336
142
023.4701
RC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®/burn-out polymer
145
023.4702
RC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, Ceramicor ®158
023.4704
RC Coping, for bridge on multi-base abutment, angled 25°, diameter 4.0 mm, burn-out polymer
145
023.4706
RC Coping, for bar on multi-base abutment, angled 25°, diameter 4.0 mm, titanium
160
023.4741
145
023.4742
023.4744
145
023.4746
160
Alphabetical Index
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
145
145
160
Gold abutment, for crown, height 3.3 mm, Ceramicor ®/burn-out polymer
138
Gold abutment, for bridge, height 5.2 mm, Ceramicor ®/burn-out polymer
138
76
76
42/43
42/43
42/43
42/43
42/43
42/43
42/43
42/43
Healing abutment, customizable, diameter 7.0 mm, polymer
42/43
Implant analog, length 12.0 mm, titanium
137
Implant analog, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
144
141
141
141
141
Implant analog, for multi-base abutment, straight, diameter 4.5 mm, titanium alloy
144
Implant analog, for multi-base abutment, straight, diameter 6.5 mm, titanium alloy
144
Impression post, for closed tray, with guide screw and cap, length 12.3 mm, titanium alloy/polymer
137
Impression post, for open tray, short, with guide screw, length 16.5 mm, titanium alloy
137
Impression cap, for cementable abutment, diameter 5.0 mm, abutment height 4.0 mm, polymer
141
141
Impression post, for open tray, long, with guide screw, length 24.0 mm, titanium alloy
137
Impression post, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium alloy
144
141
141
Impression cap, for multi-base abutment, straight, diameter 4.5 mm, polymer
144
Impression post, for multi-base abutment, straight, diameter 4.5 mm, titanium alloy
144
Impression cap, for multi-base abutment, straight, diameter 6.5 mm, polymer
144
Impression post, for multi-base abutment, straight, diameter 6.5 mm, titanium alloy
144
LOCATOR® abutment, height 1.0 mm, titanium alloy with TiN coating
155
155
155
155
155
155
Meso abutment, diameter 8.0 mm, height 13.4 mm, titanium
139
Multi-base abutment, straight, diameter 4.5 mm, gingiva height 1.0 mm, titanium alloy
143/158/160
143/158/160
143/158/160
143/158/160
143/158/160
143/158/160
Multi-base abutment, angled 25°, type A, diameter 4 mm, gingiva height 2.5 mm, titanium alloy
143/158/160
Multi-base abutment, angled 25°, type B, diameter 4 mm, gingiva height 2.5 mm, titanium alloy
143/158/160
PLAN Anatomic abutment, straight, gingiva height 2.0 mm, polymer
122
PLAN Anatomic abutment, straight, gingiva height 3.5 mm, polymer
122
PLAN Anatomic abutment, angled 15°, gingiva height 2.0 mm, polymer
122
PLAN Anatomic abutment, angled 15°, gingiva height 3.5 mm, polymer
122
PLAN Gold abutment, for crown, height 3.3 mm, polymer
122
PLAN Cementable abutment, diameter 5.0 mm, gingiva height 1.0 mm, abutment height 4.0 mm, polymer
124
124
124
124
124
124
PLAN Gold abutment, for bridge, height 5.2 mm, polymer
122
124
124
124
124
124
124
INDEX
023.4761
023.4762
023.4764
023.4766
022.4410
022.4430
026.4801
026.6801
024.4222
024.4224
024.4226
024.4234
024.4236
024.4242
024.4244
024.4246
024.4270
025.4101
025.4106
025.4122
025.4126
025.4132
025.4136
025.4141
025.4161
025.4201
025.4202
025.4203-04
025.4204-04
025.4205
025.4206
025.4220-04
025.4230-04
025.4241-04
025.4242
025.4261-04
025.4262
022.4501
022.4502
022.4503
022.4504
022.4505
022.4506
022.4202
022.4741
022.4742
022.4744
022.4761
022.4762
022.4764
022.4782
022.4786
025.4601-04
025.4602-04
025.4603-04
025.4604-04
025.4610-04
025.4621-04
025.4622-04
025.4623-04
025.4625-04
025.4626-04
025.4627-04
025.4630-04
025.4631-04
025.4632-04
025.4633-04
025.4635-04
025.4636-04
025.4637-04
195
Alphabetical Index
INDEX
025.4641-04
025.4642-04
025.4643-04
025.4644-04
025.4645-04
025.4646-04
025.4651-04
025.4652-04
025.4654-04
025.4656-04
025.4657-04
025.4659-04
025.4662-04
025.4665-04
025.4920
025.4920-04
024.4306-04
024.4322-04
024.4326-04
024.4332-04
024.4336-04
024.4341-04
024.4307
024.4342
024.4356
024.4361-04
024.4362
024.4366
024.4370
024.4371
024.4375
025.4912-04
025.4913-04
025.4903
025.4903-04
046.243
034.064-03
040.454S
040.455S
040.456S
040.457S
044.126
048.439
046.069
044.003
044.004
044.022
048.373V4
048.371V4
049.850
049.071
196
049.851
048.033
048.034
048.037
048.029
048.028
048.017V4
048.175
048.176
048.177
048.178
048.179
048.180
048.354
048.926V4
048.927V4
048.928V4
048.047V4
RC PLAN LOCATOR® abutment, height 1.0 mm, polymer
126
126
126
126
126
126
RC PLAN Multi-base abutment, straight, diameter 4.5 mm, gingiva height 1.0 mm, polymer
125
125
125
125
125
125
RC PLAN Multi-base abutment, angled 25°, type A, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
RC PLAN Multi-base abutment, angled 25°, type B, diameter 4.0 mm, gingiva height 2.5 mm, polymer
125
139/146/162
139/146/162
RC Protective cap, for multi-base abutment, angled 25°, diameter 4.0 mm, polymer
144
RC Protective cap, for cementable abutment, diameter 5.0 mm, abutment height 4.0 mm, polymer
141
141
141
141
RC Protective cap, for multi-base abutment, straight, diameter 4.5 mm, polymer
144
RC Temporary coping, for multi-base abutment, angled 25°, diameter 4.0 mm, titanium
144
144
141
RC Protective cap, for multi-base abutment, straight, diameter 6.5 mm, polymer
144
144
141
RC Temporary abutment, diameter 7.0 mm, height 12.0 mm, polymer/titanium alloy
137
RC Temporary abutment, for crown, diameter 4.5 mm, height 11.0 mm, titanium alloy
137
RC Temporary abutment, for bridge, diameter 4.5 mm, height 11.0 mm, titanium alloy
137
RC Transfer aid, for cementable abutment, diameter 5.0 mm, polymer
142
RC Transfer aid, for cementable abutment, diameter 6.5 mm, polymer
142
127
127
Reamer for 45° shoulders, Ø 8.0 mm, stainless steel/Ti-N
84/93/95/100/101/118/120
Reference pin for templiX reference plate
11
Refill package, Drill stop set, type A, for short drill 12.0 mm/long drill 16.0 mm, Ø 3.3/4.1/4.8 mm implants
12/47/48/49/50/51
Refill package, Drill stop set, type B, for short drill 10.0 mm/long drill 14.0 mm, Ø 3.3/4.1/4.8 mm implants
47
Refill package, Drill stop set, type C, for short drill 8.0 mm/long drill 12.0 mm, Ø 3.3/4.1/4.8 mm implants
47
Refill package, Drill stop set, type D, for short drill 6.0 mm/long drill 10.0 mm, Ø 3.3/4.1/4.8 mm implants
12/47/48/49/50/51
Residual ridge drill, Ø 1.25 mm, length 37.0 mm, Stop 16.0 mm, stainless steel
5
Retentive anchor abutment, height 3.4 mm, titanium
107
Retentive anchor driver, length 19.0 mm, stainless steel
83/85/107
52/53/54/55/56/57/58/59/60/66/67/68/69/70
52/53/54/55/56/57/58/59/60/66/67/68/69/70
52/53/54/55/56/57/58/59/60/65/66/67/68/69/70
RN Closure screw, large, height 1.5 mm, titanium
20/21/22/23/27/28/29/30/34/35/36
RN Closure screw, small, titanium
20/21/22/23/27/28/29/30/34/35/36
76
RN Guiding sleeve for Straumann dental implants, Ø 4.1 mm and Ø 3.5 mm, cement and screw-retained, Ø 4.2 mm,
76
76
20/21/22/23/27/28/29/30/34/35/36
20/21/22/23/27/28/29/30/34/35/36
20/21/22/23/27/28/29/30/34/35/36
RN Healing cap, labial bevel, large, height 3.5 mm, titanium
27/28/29/30/34/35/36
RN Healing cap, labial bevel, small, height 2.0 mm, titanium
27/28/29/30/34/35/36
RN Impression cap, height 8.0 mm, plastic
92/117
108
108
108
108
108
108
RN Occlusal screw (for ceramic only), length 5.0 mm, titanium alloy
90
90
90
90
117
Alphabetical Index
048.048V4
048.049V4
048.542
048.541
048.540
040.840 040.740 040.841 040.741 040.842 040.742 048.610
048.611
048.612
048.613
048.615
048.616
048.617
048.618
048.916V4
048.917V4
048.918V4
048.919V4
048.922V4
048.923V4
048.924V4
048.925V4
048.929V4
048.601
048.108
048.124
048.605
048.930V4
048.642
048.204
048.632
044.575
044.577
044.579
034.245
034.445
048.633
52/67/69/71
53/67/69/71
54/67/69/71
49/72
49/72
INDEX
048.093V4
048.090
048.010
048.560
048.241
048.240
048.920V4
048.662
048.663
048.227
048.229
048.070V4
048.650
048.651
048.634
048.665
048.672
048.668
048.214
048.921V4
048.620
048.654
048.655
048.088
048.088-04
117
117
RN Solid abutment 6°, blue, height 7.0 mm, titanium
116/117
RN Solid abutment 6°, grey, height 5.5 mm, titanium
116/117
RN Solid abutment 6°, yellow, height 4.0 mm, titanium
116/117
RN Solid All-In-One set, 4.0 mm, for bridge, titanium, plastic 116
RN Solid All-In-One set, 4.0 mm, for crown, titanium, plastic 116
RN Solid All-In-One set, 5.5 mm, for crown, titanium, plastic
116
96
96
96
96
96
96
96
96
88
88
88
88
88
88
88
88
RN synOcta® 1.5 PLAN abutment, plastic
88
RN synOcta® 1.5 screw-retained abutment, height 1.5 mm, titanium alloy
93/94/104/105/106
RN synOcta® analog for bars with 048.601, one-part, length 11.5 mm, stainless steel
106
RN synOcta® analog, grey with red stripe, length 12.0 mm, stainless steel
94/106/107
RN synOcta® cementable abutment, height 5.5 mm, titanium
95
RN synOcta® cementable PLAN abutment, plastic
90
RN synOcta® gold abutment, crown (includes basal screw 048.356), height 4.3 mm, alloy weight 0.61 g, Ceramicor ®/burn-out plastic
93
RN synOcta® gold coping for synOcta® 1.5, bar, height 6.0 mm, alloy weight 0.77 g, Ceramicor ®104
RN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), bridge, height 4.25 mm/12.0 mm, alloy weight 0.33 g,
93
RN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), crown, height 4.25 mm/12.0 mm, alloy weight 0.36 g,
93
RN synOcta® impression cap for bars with 048.601, one-part, grey, height 5.0 mm, plastic
106
RN synOcta® impression cap with built-in handle, red, height 21.0 mm, aluminum/titanium
92
RN synOcta® impression cap with integral guide screw, red, height 10.1 mm, aluminum/titanium
92
RN synOcta® Meso abutment, height 10.0 mm, Ø 8.0 mm, titanium
93
RN synOcta® milling cylinder for synOcta® 1.5, bridge, Ø 6 mm, height 8.0 mm, titanium
94
RN synOcta® milling cylinder for synOcta® 1.5, crown, Ø 6 mm, height 8.0 mm, titanium
94/114
RN synOcta® PLAN abutment, plastic
90
RN synOcta® plastic coping for 048.605, bridge, height 7.0 mm, burn-out plastic
84/95
RN synOcta® plastic coping for 048.605, crown, height 7.0 mm, burn-out plastic
84/95
RN synOcta® plastic coping for synOcta® 1.5, bridge/bar, height 10.0 mm, burn-out plastic
93/105
RN synOcta® plastic coping for synOcta® 1.5, crown, height 10.0 mm, burn-out plastic
93
RN synOcta® positioning cylinder, red, height 12.0 mm, plastic
92
RN synOcta® post for temporary restorations with integral guide screw, bridge, height 9.0 mm, titanium
92/99
RN synOcta® post for temporary restorations with integral guide screw, crown, height 9.0 mm, titanium
92/99
RN synOcta® TS gold coping, height 5.4 mm, alloy weight 0.96 g, Ceramicor ®98
RN synOcta® TS plastic coping, height 5.4 mm, Ceramicor ®/burn-out plastic
98
RN synOcta® TS thread protection screw for 048.634 and 048.665, Ø 3.0 mm, length 8.2 mm, stainless steel
98
RN synOcta® temporary meso abutment, includes basal screw, height 10.0 mm, polymer/titanium alloy
92
RN synOcta® titanium coping for synOcta® 1.5, bar, height 6.0 mm, titanium
105
RN synOcta® transversal PLAN abutment, plastic
90
RN synOcta® transversal (TS), screw-retained abutment, height 4 mm, titanium
98
RN Temporary coping for RN Solid abutments, bridge, height 8.5 mm, polymer
117
RN Temporary coping for RN Solid abutments, crown, height 8.5 mm, polymer
117
90
90
197
Alphabetical Index
INDEX
034.645
044.591
044.593
044.595
044.590
044.592
044.594
046.256
046.258
046.257
048.364V4
048.365V4
048.366V4
048.363V4
048.362V4
048.360V4
048.361V4
049.082
049.182
049.083
049.167
048.350V4
049.181
198
49/72
52/66/68/71
53/66/68/71
54/66/68/71
52/66/68/71
53/66/68/71
54/66/68/71
Screwdriver blade for implant screws, crosspoint Ø 1.5 mm, length 69.0 mm, stainless steel
5
Screwdriver handle for screwdriver blade 046.256, length 100.0 mm, aluminum, stainless steel
5
Screw-holding device for screwdriver blade 046.256, length 45.0 mm, stainless steel
5
114
114
114
SCS Guide screw for 048.240/241, can be shortened by 2.0 mm, length 8.0 mm, titanium
94/114
SCS Guide screw for 048.240/241, cannot be shortened, length 8.0 mm, titanium
94/114
SCS Guide screw for RN synOcta ® bar copings, cannot be shortened, length 6.0 mm, titanium
114
SCS Guide screw for RN synOcta® bar copings, can be shortened by 1.6 mm, length 6.0 mm, titanium
114
SCS Guiding cylinder, Ø 3.6 mm, length 10.5 mm, stainless steel
61/66/67/68/69/71/76
SCS Guiding cylinder, for Straumann dental implants, Ø 3.3 mm Narrow Neck, Ø 3.6 mm, length 5.0 mm, titanium/stainless steel
76
76
76
SCS Occlusal screw, length 4.4 mm, titanium
75/76/78/95/98/102/106/107/116
SCS Occlusal screw, long, length 7.6 mm, titanium alloy
76/92/99
for screw-retaining of 049.071, 049.850 and 049.851 on an octa or cone abutment 15°
for 048.650/048.651 & 048.233/048.234
046.410
SCS Screwdriver for handpiece, extra short, length 20.0 mm, stainless steel
63/67/69/83
046.412
SCS Screwdriver for handpiece, long, length 32.0 mm, stainless steel
63/83
046.411
SCS Screwdriver for handpiece, short, length 26.0 mm, stainless steel
63/67/69/72/83
046.400
SCS Screwdriver for ratchet, extra short, length 15.0 mm, stainless steel
63/66/67/68/69/70/83/85
046.402
SCS Screwdriver for ratchet, long, length 27.0 mm, stainless steel
63/83
046.401
SCS Screwdriver for ratchet, short, length 21.0 mm, stainless steel
63/66/67/68/69/70/72/83/85
041.047
Screw container, with lid, for Straumann surgical cassette, without screws, length 69.0 mm, width 47.0 mm, height 29.0 mm, plastic
64
046.154
Screwdriver, length 37.0 mm, stainless steel
84/107
040.360
Screwdriver complete with screwdriver blade and screw-holding device for implant screws, crosshead Ø 1.5 mm,
5
length 160.0 mm, aluminum, stainless steel
048.452
Screwdriver for titanium matrix, length 50.0 mm, stainless steel
107
046.085 Screwdriver handle for 046.410/411/412, length 109.0 mm, stainless steel/PEEK
83
046.108
Service instrument for ratchet, length 50.0 mm, stainless steel
62/83
048.117V4
Shoulder analog for RN Solid abutments, length 10.0 mm, with reinforcement pin, length 17.0 mm, plastic/brass
117
048.140
Shoulder analog for WN Solid abutments, length 10.0 mm, aluminum
119
034.050V4
12/51
034.052V4
12/51
034.057
11
034.059
11
174.021V5SmartpegTM Type 4 for RN and WN (delivered sterile, disposable)
80
174.020V5SmartpegTM Type 17 for NN (delivered sterile, disposable)
80
174.155V5SmartpegTM Type 41 for NC (Bone Level, delivered sterile, disposable)
80
174.156V5SmartpegTM Type 42 for RC (Bone Level, delivered sterile, disposable)
80
046.068
Solid abutment driver for RN Solid abutments 6°, long, length 19.0 mm, stainless steel
83/85/116
046.067
Solid abutment driver for RN Solid abutments 6°, short, length 13.0 mm, stainless steel
83/85/116
034.235
49/72
034.435
49/72
044.087
52/65/66/67/68/69/71
044.089
53/65/66/67/68/69/71
044.085
SP Profile drill, long, Ø 4.2 mm, WN, length 34.0 mm, stainless steel
54/65/66/67/68/69/71
044.086
52/65/66/67/68/69/71
044.088
53/65/66/67/68/69/71
044.084
SP Profile drill, short, Ø 4.2 mm, WN, length 25.0 mm, stainless steel
54/65/66/67/68/69/71
048.451V4
Spacer for titanium matrix, height 3.5 mm, plastic
107
048.457
Spare lamella retention insert, height 2.6 mm, Elitor ®107
048.455V4
Spring for 048.450, stainless steel
107
048.208V4
Stabilization pin for retaining gold copings in solder investment, length 11.0 mm, stainless steel
104
049.818V4
Stepped pin for 049.810V4, height 16.0 mm, Ø 2.2/3.5 mm, titanium
15
034.006 Stop key for guided implants, stainless steel
50/72
041.500
Storage system for implants (SLA® & SLActive ®) incl. drawers and dividers, 226.0 x 280.0 x 248.0 mm, polymer
64
041.501
Storage system for prosthetics incl. drawers and dividers, 226.0 x 280.0 x 248.0 mm, polymer
82
046.148
Standard, Standard Plus and Tapered Effect implant distance indicator, length 100.0 mm, titanium/stainless steel
14/66/67/72
22
22
22
Alphabetical Index
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Guided Roxolid Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLA® 8.0 mm, titanium
Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLA® 6.0 mm, titanium
Implant Ø 4.8 mm, Wide Neck Ø 6.5 mm, SLActive ® 6.0 mm, titanium
Plus Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
Plus Guided Roxolid Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
Plus Implant Ø 3.3 mm, Narrow Neck Ø 3.5 mm, SLA® 8.0 mm, titanium
Plus Implant Ø 3.3 mm, Narrow Neck Ø 3.5 mm, SLActive ® 8.0 mm, titanium
Plus Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLA® 8.0 mm, titanium
Plus Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, titanium
21
21
21
17/20
17/20
17/20
17/20
17/20
16/20
16/20
16/20
16/20
16/20
17/22
17/22
17/22
17/22
17/22
17/22
16/22
16/22
16/22
16/22
16/22
16/22
17/23
17/23
17/23
17/23
17/23
16/23
16/23
16/23
16/23
16/23
17/24
17/24
17/24
17/24
16/24
16/24
16/24
16/24
29
29
29
30
30
30
28
28
28
17/26
17/26
17/26
17/26
16/26
16/26
16/26
16/26
17/27
17/27
17/27
17/27
16/27
16/27
16/27
16/27
17/29
17/29
INDEX
033.431G 033.432G 033.433G 043.131S
043.132S
043.133S
043.134S
043.135S
033.131S
033.132S
033.133S
033.134S
033.135S
043.030S
043.031S
043.032S
043.033S
043.034S
043.035S
033.030S
033.031S
033.032S
033.033S
033.034S
033.035S
043.230S
043.231S
043.232S
043.233S
043.234S
033.230S
033.231S
033.232S
033.233S
033.234S
043.630S
043.631S
043.632S
043.633S
033.630S
033.631S
033.632S
033.633S
033.051G 033.052G 033.053G 033.251G 033.252G 033.253G 033.451G 033.452G 033.453G 042.930S
042.931S
042.932S
042.933S
033.951S
033.952S
033.953S
033.954S
043.151S
043.152S
043.153S
043.154S
033.151S
033.152S
033.153S
033.154S
043.050S
043.051S
199
INDEX
Alphabetical Index
200
043.052S
17/29
043.053S
17/29
043.054S
17/29
033.050S
16/29
033.051S
16/29
033.052S
16/29
033.053S
16/29
033.054S
16/29
043.250S
17/30
043.251S
17/30
043.252S
17/30
043.253S
17/30
043.254S
17/30
033.250S
16/30
033.251S
16/30
033.252S
16/30
033.253S
16/30
033.254S
16/30
043.650S
17/31
043.651S
17/31
043.652S
17/31
043.653S
17/31
033.650S
16/31
033.651S
16/31
033.652S
16/31
033.653S
16/31
033.451S Standard Plus Roxolid® Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
18/28
033.452S
18/28
033.453S
18/28
033.454S
18/28
033.431S Standard Roxolid® Implant Ø 3.3 mm, Regular Neck Ø 4.8 mm, SLActive ® 8.0 mm, TiZr
18/21
033.432S
18/21
033.433S
18/21
033.434S
18/21
033.435S
18/21
034.060
12
034.061
12
070.218
3
070.219
3
070.220
3
070.221
3
070.222
3
070.223
3
070.224
3
070.225
3
070.226
4
070.227
4
070.228
4
070.229
Straumann AlloGraft OCAN, 250-1000 microns, Unite size 0.25 cc
3
3
3
3
3
3
3
041.032Straumann® Bone Block Fixation, cassette for drills, mini-screws and screw-driver for bone block fixation, 130 x 118 x 25 mm, thermo-plastic 5
4
4
070.205Straumann® BoneCeramic 500–1000, Granule size: 500–1000 microns, Unit size: 1 g, Volume: approx. 1.9 ml
4
075.113
Straumann ® Emdogain 0.3 ml, multipack incl. Straumann ® PrefGel 2
075.115
Straumann ® Emdogain 0.7 ml, multipack incl. Straumann ® PrefGel2
025.2905Straumann® NC Scanbody, includes fixation screw, length 11.7 mm, polymer
127
048.067Straumann® NN Scanbody, includes fixation screw, length 9.2 mm, polymer
90
075.203Straumann® PrefGel 0.6 ml, 5 x Straumann® PrefGel 0.6 ml ready-to-use syringe
2
048.068Straumann® RN Scanbody, includes fixation screw, length 8.5 mm, polymer
90
140.019Straumann® Standard Plus (NN) Implant, consisting of: NN Standard Plus Implant, NN Healing cap with integr. occlusal screw,
164
NN Impression cap, NN Protective cap with integr. occlusal screw, NN Analog, NN Framework blank, NN Titanium abutment coping,
SCS Screwdriver, plastic box, metal, plastic
040.165Straumann® surgical cassette, includes screw container 041.047, without instruments, length 290.0 mm, 64/66/67/68/69/70
width 175.0 mm, height 62.0 mm, plastic
Alphabetical Index
140.062Straumann® Tapered Effect Implant, Ø 4.1 mm, RN, SLA® 10.0 mm, cardboard box, stainless steel
164
048.069Straumann® WN Scanbody, includes fixation screw, length 8.9 mm, polymer
90
034.001
Surgical cassette, for Straumann® Guided Surgery, length 290.0 mm, width 175.0 mm, height 62.0 mm, plastic
51/72
048.356synOcta® basal screw, length 6.7 mm, titanium alloy
90/92/93/100
048.357synOcta® basal screw, length 6.7 mm, titanium alloy, for 048.644, 048.651, 048.560, 048.642
93/100
046.246synOcta® guide pin for reamer 046.243, for 048.662, 048.663, length 50.0 mm, stainless steel
84/95
046.247synOcta® guide pin for reamer 046.243, for 048.606, length 50.0 mm, stainless steel
84/101
046.241synOcta® guide pin for reamer 046.243, length 50.0 mm, stainless steel
84/93/95/98/100/101/118/120
140.024synOcta® system, consisting of: Standard Plus Implant, RN Impression cap, RN synOcta® positioning cylinder,
164
RN synOcta® analog, RN synOcta® abutment, SCS Screwdriver, RN synOcta® gold coping with plastic crown, SCS Occlusal screw,
plastic box, metal, plastic
Tap for TS, M2 x 0.25 mm, stainless steel
Tapered Effect Guided Implant Ø 4.1 mm, Regular Neck Ø 4.8 mm, SLActive ® 10.0mm titanium
TE Profile drill, long, Ø 4.2 mm, WN, length 37.0 mm, stainless steel
TE Profile drill, short, Ø 4.2 mm, WN, length 28.0 mm, stainless steel
templiX reference plate
Threaded mounting ring for titanium matrix, height 2.2 mm, plastic
Titanium matrix for retentive anchor, height 3.1 mm, titanium alloy
Torque control device for ratchet, length 82.0 mm, stainless steel
Transfer aid for RN synOcta ® 15° and 20° angled abutments, long, height 5.5 mm, plastic
Transfer aid for RN synOcta® 15° and 20° angled abutments, short, height 4.0 mm, plastic
Transfer aid for RN synOcta® TS abutment, height 5.0 mm, plastic
Transfer aid for WN synOcta® 15° angled abutments, height 5.0 mm, plastic
Transfer pin for retentive anchor, length 18.0 mm, stainless steel
Transversal screw for 048.620, Ø 2.0 mm, length 3.0 mm, titanium alloy
TS Hexagonal screwdriver, length 24.0 mm, stainless steel
Tweezers with titanium plasma-coated tips, length 115.0 mm, stainless steel/titanium
12/51
12/51
84/93/95/98/100/101/118/120
36
36
36
17
17
17
17
16
16
16
16
17/36
17/36
17/36
17/36
16/36
16/36
16/36
16/36
16/37
16/37
16/37
17/37
17/37
17/37
18/35
18/35
18/35
18/35
49/72
49/72
55/65/66/67/68/69/71
57/65/66/67/68/69/71
56/65/66/67/68/69/71
55/65/66/67/68/69/71
57/65/66/67/68/69/71
56/65/66/67/68/69/71
50/72
50/72
50/72
50/72
12
107
107
62/66/67/68/69/70/72/85
95
101
96
96
98
102
107
98
83/98
62/66/67/72/85
INDEX
034.053V4
034.055V4
044.570
033.761G 033.762G 033.763G 043.721S
043.722S
043.723S
043.724S
033.721S
033.722S
033.723S
033.724S
043.761S
043.762S
043.763S
043.764S
033.763S
033.764S
033.761S
033.762S
033.712S
033.713S
033.714S
043.712S
043.713S
043.714S
033.751S 033.752S
033.753S
033.754S
034.237
034.437
044.708
044.710
044.712
044.701
044.703
044.705
034.256
034.255
034.455
034.655
034.062-03
048.454V4
048.450
046.049
048.059V4
048.054V4
048.002V4
048.000V4
048.003V4
048.032
048.109
049.154
046.420
046.095
201
Alphabetical Index
046.057
034.229
034.429
034.629
044.251
044.255
034.226
034.426
034.626
044.250
044.254
034.223
034.423
034.623
Tweezers without titanium plasma-coated tips, length 115.0 mm, stainless steel
040.175 140.033
Ultrasonic cleaning cassette, 150 x 65 x 25 mm, plastic/silicone
Upper jaw, two single-tooth gaps and unilateral free-end saddle, with 4 implants:
1 x Standard Plus Implant Ø 3.3 mm, NN, 1 x Standard Implant Ø 4.8 mm, WN, 1 x Standard Implant Ø 4.1 mm, RN,
1 x Standard Implant Ø 4.8 mm, RN, plastic, acrylic glass, titanium
019.0063
048.375
048.038
048.039
048.053
048.030
048.013
048.183
048.184
048.185
048.186
048.187
048.051
048.052
048.546
048.545
040.845 040.745 040.846 040.746 048.931V4
048.603
048.608
048.609
048.933V4
048.934V4
048.171
048.606
048.932V4
048.644
048.638
048.091
048.561
048.666
048.667
048.244
048.243
048.095
048.234
048.233
048.656
048.657
048.089
048.089-04
Wax up kit, CARES, contains wax up sleeve holders for Straumann dental restorations on Straumann implants
90/127
WN Closure screw, titanium
24/31/37
24/31/37
24/31/37
24/31/37
WN Healing cap, labial bevel, height 2.0 mm, titanium
24/31/37
WN Impression cap, height 8.0 mm, plastic
99/119
111
111
111
111
111
119
119
WN Solid abutment 6°, brown, height 5.5 mm, titanium
107/119
WN Solid abutment 6°, green, height 4.0 mm, titanium
119
WN Solid All-In-One set, 4.0 mm, for bridge, titanium, plastic 119
WN Solid All-In-One set, 4.0 mm, for crown, titanium, plastic 119
WN Solid All-In-One set, 5.5 mm, for bridge, titanium, plastic 119
WN Solid All-In-One set, 5.5 mm, for crown, titanium, plastic 119
WN synOcta® 1.5 PLAN abutment, plastic
90
WN synOcta® 1.5 screw-retained abutment, height 1.5 mm, titanium
100
WN synOcta® 15° angled abutment, type A, height 5.5 mm A, titanium
102
WN synOcta® 15° angled abutment, type B, height 5.5 mm B, titanium
102
WN synOcta® 15° angled PLAN abutment, type A, plastic
90
WN synOcta® 15° angled PLAN abutment, type B, plastic
90
WN synOcta® analog, grey, length 12.0 mm, stainless steel
99
WN synOcta® Cementable abutment, height 5.5 mm, titanium
84/104
WN synOcta® Cementable PLAN abutment, plastic
90
WN synOcta® gold abutment, crown (includes basal screw 048.356), height 4.2 mm, alloy weight 0.78 g, Ceramicor ®/burn-out plastic 100
WN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), bridge, height 4.75 mm/12.0 mm, alloy weight 0.86 g,
100
WN synOcta® gold coping for synOcta® 1.5 (includes modeling aid), crown, height 4.75 mm/12.0 mm, alloy weight 0.87 g,
100
WN synOcta® impression cap with integral guide screw, height 10.0 mm, aluminum
99
WN synOcta® Meso abutment, height 10.0 mm, Ø 10.0 mm
100
WN synOcta® plastic coping, bridge, height 10.0 mm, burn-out plastic
100
WN synOcta® plastic coping, crown, height 10.0 mm, burn-out plastic
100
WN synOcta® plastic coping for 048.606, bridge, height 7.3 mm, burn-out plastic
101
WN synOcta® plastic coping for 048.606, crown, height 7.2 mm, burn-out plastic
101
WN synOcta® positioning cylinder, white, height 12.0 mm, plastic
99
WN synOcta® post for temporary restorations with integral guide screw, bridge, height 9.0 mm, titanium
92/99
WN synOcta® post for temporary restorations with integral guide screw, crown, height 9.0 mm, titanium
92/99
WN Temporary coping for WN Solid abutments, bridge, height 7.3 mm, polymer
119
WN Temporary coping for WN Solid abutments, crown, height 7.3 mm, polymer
119
90
90
150.215
150.216
150.230
049.076V4
X-ray templates for Standard and Standard Plus implants, plastic
X-ray templates for Bone Level implants, plastic
X-ray templates for Tapered Effect implants, plastic
X-ray reference sphere, Ø 5.0 mm, stainless steel
INDEX
048.639
202
62
48/72
48/72
48/72
53/54/56/57/59/60/65/66/67/68/69/70
54/57/60/65/66/67/68/69/70
48/72
48/72
48/72
53/54/56/57/59/60/65/66/67/68/69/70
54/57/60/65/66/67/68/69/70
48/72
48/72
48/72
64/66/67
164
14
14
14
14
INDEX
203
Notes
Notes
Notes
Notes
The ITI (International Team for Implantology) is academic partner of Institut Straumann
in the areas of research and education.
Straumann USA
Straumann USA, LLC
60 Minuteman Road
Andover, MA 01810
Phone
800/448 8168
978/747 2500
Fax
978/747 2490
www.straumannusa.com
Straumann Canada
Straumann Canada Limited
3115 Harvester Road, Suite 100
Burlington, ON L7N 3N8
Phone
800/363 4024
905/319 2900
Fax
905/319 2911
www.straumann.ca
© Straumann USA, 2012. All rights reserved.
Straumann® and/or other trademarks and logos from Straumann® that are mentioned herein are the trademarks or registered trademarks of Straumann USA and/or its affiliates. All rights reserved.
PRoduct Catalog 2012
International Headquarters
Institut Straumann AG
Peter Merian-Weg 12
CH-4002 Basel, Switzerland
Phone+41 (0)61 965 11 11
Fax +41 (0)61 965 11 01
Straumann products are CE marked
1/12
w w w. strau m an n .c o m
USLIT 007
PRoduct Catalog
2012

product catalog 2012

Transcription

Similar documents

Mosaic Tile Backsplash Design Guide

PRoduct catalog 2014

wer lacht, zeigt zähne. wenn die augen sich zu

STRAUMANN® DENTAL IMPLANT SYSTEM RESToRATIVE

12x12 - MSI Stone