Industrial Thermometer

Transcription

Industrial Thermometer
Quality
by Tradition
Since 1901 Dr. Siebert & Kühn have
produced precision measuring and
control instruments.
To solve your measuring problems,
modern facilities and an up-to-date
and highly skilled team are at your
disposal.
The Original “SIKA”-Thermometer
was developed by Dipl. Ing. Hans
Siebert, ready for production. In
1939 the basic design was registered under Patent No. 767
477 (fig. at right.)
Index
According to Types
Type
of imm.
tube
A
B
Da
Dc
Thermometers / Description of immersion tubes
Thread
DIN No.
Insertion form with plain adapter
none
16189 A
5
Standard execution
threaded socket with integral hexagonal nut
G 3/8 A, M16 x 1,5
G 1/2 A, M20 x 1,5
G 3/4 A, M27 x 2
16181B, B1, 16182S, S1
16185B,16186S, 16189B,B1
16190S, S1, 16191B, B1
5–7
acc. to their connections
Page
Union nut
immersion tube dia.10mm
G 1/2
M20 x 1,5, M27 x 2
16181C, 16182C
16185C,16186C, 16189C,C1
16190C, C1, 16191C, C1
11
Union nut, immersion tube dia. 6.5mm
M24 x 1,5
16189F
13
Special thermometer, casing incl.
scale can be turned by 360 degrees.
G 1/2
—
5–7
and 9
—
17
G 3/4
Bdr
G 3/4
M20 x 1,5, M27 x 2
Tank scooping thermometers, ambient measuring
thermometers
Protecting Tubes
Ea
Ei
Ga
Gi
Screw-in type for SIKA thermometers
type „Da“, of steel (welded) or
brass (brazed), with male thread
Screw-in type for SIKA thermometers
type „B“, of steel (welded) or
brass (brazed), with female thread
G 1/2
G 1/2
G 1/2
As type „Ei“, bur made of solid
steel or brass ( for high pressures)
G 1/2
Weld-in type for immersion tubes „B“
G 3/4
M20 x 1,5, M27 x 2
As type „Ea“, but made of solid
steel or brass (for high pressures)
BS
G 3/4
M20 x 1,5, M27 x 2
G 3/4
M20 x 1,5, M27 x 2
G 3/4
M20 x 1,5, M27 x 2
female thread
G 1/2
G 3/4
M20 x 1,5, M27 x 2
CS
Weld-in type for immersion tubes „Da“
male thread
G 1/2
G 3/4
43772
Form 8
12
43772
Form 5
8
43772
Form 9
12
43772
Form 6
8
43772
Form 4
8
16179 CS
12
M20 x 1,5, M27 x 2
HD
HDo
Weld-in type, DIN 43772 with
extension tube 165 mm, for immersion
tube type „Dc“
extension tube
M24 x1,5/M18 x 1,5
43772
Form 4
14
Dito., without extension tube, but
with double threaded nipple
nipple
M24 x1,5/M18 x 1.5
43772
Form 4
14
Spare Parts
Glass inserts
18
Thermometer casing
19
Immersion tubes for standard type „B“
19
Industrial Thermometers
Details of Design
Casings
Aluminum, V-shaped, completely polished, gold-coloured anodized (or silvercoloured upon request). Numerals of
reading scale printed on the right side.
Printing black-colored for easy readability. Adjustable to any desired viewing
position and locked by brass nut, spanner size 22 mm. Angle thermometers (90
degrees) have a grooved adapter piece
with set screw. Advantage: When mounting the thermometer, it is not necessary
to turn the casing.
Glass Inserts (Capillaries)
Capillary tube of solid glass, bar-shaped,
prismatic (optic enlargement of the
column), diameter approx. 6mm, oval
opening, with yellow background for
mercury and white background for blue
fluid column. Calibration is deeply burnt,
in black, thus being absolutely resistant.
The main graduations, which correspond
with the printing on the casing, are especially clearly outlined.
Capillary Fluid
For standard executions from -60° to
+200° C, blue fluid and red fluid, respectively, for -60° C (code „Fü“). For
temperatures of more than +200° C, only
mercury columns (code „Hg“) are possible. Upon request, thermometers can be
delivered with mercury filling from -30° C
onwards.
Immersion Tubes (Pockets)
As a standard, manufactured of brass
(code „Ms“) for temperatures up to 300°
C, for temperatures of more than 300° C
made of steel (Code „St“). Seawater resistant alloys are available upon request
(special alloy SoMs 59, SoMs 76 or
„CuNiS30Fe“). For corrosive alkalis or
acids, material 1.4571 (stainless steel)
or other resistant kinds of steel are available. With immersion tube type „B“, diameter is 10 mm, thickness 1 mm.
Accuracy
About 1 % of maximum scale value,
for thermometers with mercury column.
The accuracy of thermometers with an
alcoholic fluid meets DIN 16 195 requirements and, consequently, corresponds
with the requirements for local reading
thermometers.
SIKA-Thermometers
Casing 200 x 36 mm gold-coloured anodized
DIN 16189 A, B, B1
DIN 16190 S, S1
DIN 16191 B, B1
Order-Example
271
Thermometer execution
straight
angle 90°, backwards
Immersion tube type
Ranges
2 64 1
063
2
1
Type
271 B
Type
271
272
273
A
B
Bdr1)
=
=
=
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
1
2
6
64
35
06
10
12
16
20
30
40
50
60
Division Celsius (°C)
Celsius + Fahrenheit (°C + °F)
1
2
Columns (Filling)
Blue fluid is standard for ranges
up to +200°C (red fluid for -60°C + 40°C) Fü =
mercury is used beyond +200°C
HG =
Immersion tube lenghts
l1 in mm
(immersion tube type „B“
incl. thread connection;
for type „A“ measured from
lower edge of adapter)
Thread connection
1
1
2
63
100
160
250
400
=
=
=
=
=
G 1/2A/SW 27
G 3/4A/SW 32
M20 x 1,5/SW 27
M27 x 2/SW 32
Type
271 A
063
100
160
250
400
=
=
=
=
Type
272 B
2
3
7
9
Immersion tube materials
Brass (hex. nut Ms58/tube special brass Ms76, or MS63 brazed)
or up to immersion lenght l1 = 63, G 1/2 A available in Ms58 solid material
Steel (hex.nut 9SMnPb28K/tube steel St. 35, welded)
Stainless steel1.4571 (hex.nut and tube)
Special brass (hex.nutSoMs 59 / tube SoMs 76)
CuNi30Fe (hex.nut and tube)
1
2
3
4
5
See page 8 for protecting tubes to be screwed in or welded.
Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter
piece on top, which is installed in the casing and kept in its place by a set screw.
Advantage: Immersion tube can be installed independently of thermometer casing. No turning
of thermometer casing is necessary on installation.
1)
Bdr: Special execution of angle-type thermometer: After installation, casing can be turned by
360° in any direction. See page 9 for description and illustration.
Type
273 B
SIKA-Thermometers
DIN 16185 B
DIN 16186 S
Order-Example
straight
Immersion tube type
Ranges
291
2 64 1
B
Bdr1)
=
=
2
1
Type
291 B
2
6
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
Columns (Filling)
up to +200°C (red fluid for -60°C + 40°C)
Thread connection
063
Type
291
292
293
64
35
06
10
12
16
20
30
40
50
60
l1 in mm (incl. thread)
1
1
2
Type
292 B
Fü
HG
=
=
63
100
160
250
400
1
2
=
=
=
=
=
G 1/2A/SW 27
M20 x 1,5/SW 27
063
100
160
250
400
=
=
2
7
Stainless steel 1.4571 (hex.nut and tube)
Special brass (hex.nut SoMs 59 / tube SoMs76)
Type
293 B
1
2
3
4
5
1)
Bdr: Special execution of angle-type thermometer: After installation, casing can be turned
by 360° in any direction. See page 9 for description and illustration.
SIKA-Thermometers
DIN 16181 B, B1
DIN 16182 S, S1
Order-Example
174
straight
Immersion tube type
Ranges
2 35 1
B
Bdr1)
=
=
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
Columns (Filling)
up to +200°C
Optional: mercury
Thread connection
030
2
1
Type
174
175
176
l1 in mm (incl. thread)
1
Type
174 B
2
6
35
06
10
12
16
20
1
2
Fü =
Hg =
30
40
63
100
160
250
400
1
2
=
=
=
=
=
=
=
G 3/8A/SW 22
G 1/2A/SW 27
M16 x 1,5/SW 22
M20 x 1,5/SW 27
Type
175 B
030
040
063
100
160
250
400
=
=
=
=
1
2
5
7
Stainless steel1.4571 (hex.nut and tube)
Special brass Ms76 (hex.nut SoMs 59 / tube SoMs 76)
1
2
3
4
5
1)
Bdr: Special execution of angle-type thermometer: After installation, casing can be turned by
360° in any direction. See page 9 for description and illustration.
Type
176 B
Protecting Tubes
DIN 43772 Form 4, 5, 6
for SIKA-Thermometers with
Immersion Tube Type „B“, to be screwed in
Order-Example
Immersion tube execution
DIN Form 5 = SIKA
DIN Form 6 = SIKA
DIN Form 4 = SIKA
179.1 045
Type Ei (Abb. 1)
3 pieces, tube, brazed into
socket for non-ferrous
materials or welded for
steel, to be screwed in
63
100
160
250
400
Type Gi (Abb. 2)
made of solid material
(1 piece)
to be screwed in
c
45
82
142
232
382
=
=
=
=
=
045
082
142
232
382
50
82
142
232
e 382
=
=
=
=
=
050
082
142
232
382
1a
=
=
=
=
=
048
073
133
223
373
c
48
73
133
d 223
e 373
Type BS (Abb. 3 to 5)
made of solid matrial
(1 piece)
weld-in type
Thread connection Dimensions E/N
Ei
G 1/2
M 20 x 1,5
G 3/4
M 27 x 2
=
=
=
=
: Precision steel or
2.0401 - CuZn39Pb3 (Ms58)
or 2.0402 - CuZn40Pb2
Tube SoMs76 or Ms63
brazed
: 2.0401 - CuZn39Pb3 (Ms58)
or 2.0402 - CuZn40Pb2
: 1.0718 - MSUnPb30+C
: 1.4571 - X6CrNiMoTi17122
: Hex. nut 2.0540 - CuZn35Ni2 (SoMs59)
Tube 2.0460 - CuZn20AI2 (SoMs76)
: 2.0540 - CuZn35Ni2 (SoMs59)
2.0882 - CuNi30Fe
1.7335 - 13 CrMo44
1.7380 - 10CrMo910
1.5415 - 16Mo3
: 1.0460 - C22.8
Gi
Gi
Ei, Gi or Bs
Ei
Gi
Bs
Dimensions of Form 4,5 + 6
Thread
E/N
Code
Nr.
G 1/2
2
M 20 x 1,5
7
G 3/4
3
M 27 x 2
9
c
1a
o
Type Ei = DIN Form 5
Type Gi = DIN Form 6
Code No. 179.1
Code No. 179.3
Type BS = DIN Form 4
DIN 16179 Form BS
Code No. 180.5
Code No. 180.5
Imm. length of
protecting tube U1/U
(in mm)
63
100
160
250
400
Materials
for Type:
0
Type Ei = 179.1
Type Gi = 179.3
Type BS = 180.5
Imm. length l1 (in mm)
of fitting immersion
tube type „B“
63
100
160
250
400
2
2
7
3
9
=
0
=
1
=
=
=
1
2
3
=
=
=
=
=
=
=
4
15
5
7
8
9
6
SIKA Norm BS
Code No. 180.5
Dimensions of Form BS (Abb. 4)
D1
H2
F2
F2
d1
F1
F3
K1
H1
SW
26
15
26
h7
17
11
14
17
14
19
27
32
17
32
h11
19
11
14
17
16
22
32
no DIN-Standard
d acc. DIN 16179 BS (old version)
See pages 15 and 16 for pressure loads and works certificates.
Thread
d1
Code
Nr.
M 20 x 1,5
7
G 1/2
2
G 3/4
3
M 27 x 2
9
d5
h11
d6
d7
b1
h6
r2
r3
30
25
11
16
39
2,5
8,5
36
26
11
20
45
4
8,5
SIKA-Thermometers
Revolving angle type
This original SIKA thermometer design
permits the casing including insert to be
turned by 360 degrees, after installa-
tion, so it can be read from any direction. do not permit using a normal angleThis special SIKA thermometer type will type thermometer which is read from
be applied when installation conditions
the front.
SIKA-Thermometers
with seperate Protecting Tubes
SIKA thermometer with immersion
tube type „B“, threaded socket with
integral hexagonal nut, with separate
protecting tube type „Gi“ made of solid
material (1 piece), to be screwed in.
tube type „B“, with separate protecting tube type „Bs“ for high pressures,
to be welded in.
tube type „B“, threaded socket with
integral hexagonal nut, with separate protecting tube type „Ei“, brazed
for brass, or welded for steel, to be
screwed in.
SIKA-Thermometers
Immersion Tube Type „Da“, Union nut
G 1/2 - G 3/4 - M 20 x 1,5 - M 27 x 2
Casing 200 x 36mm gold-coloured anodized
DIN 16189 C, C1
DIN 16190 C, C1; DIN 16191 C, C1
Order-Example
271
straight
Immersion tube type
Ranges
3 64 1
089
2
A
Type
271
272
273
Da
=
Type
271 Da
3
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
64
35
06
10
12
16
20
30
40
50
60
1
2
Columns (Filling)
beyond +200°C, only mercury is used
HG =
Immersion tube lengths l1 in mm1)
with union nut G1/2, M 20 x 1,5 (SW 27)
with union nut G3/4, M 27 x 2 (SW 32)
Union nut of brass
1
1
2
89
126
186
276
426
93
130
190
280
430
=
=
=
=
=
=
=
=
=
=
G 1/2
M 20 x 1,5
G 3/4
M 27x 2
089
126
186
276
426
093
130
190
280
430
=
=
=
=
Type
272 Da
2
7
3
9
Standard: up to +300°C nipple Ms58 / tube SOMs76 or Ms63
beyond +400°C nipple Ms58 / tube St. 35
Option: nipple and tube stainless steel 1.4571
A
A
C
1) Immersion tube lengths match protecting tubes axx. to DIN 16179; see page 12 for this.
Type
273 Da
Protecting Tubes
DIN 43772 Form 8, 9 and DIN 16179 CS (old version)
for SIKA-Thermometers with
Immersion Tube Type „Da“ (connection by union nut)
Order-Example
179.2 073
179.2
179.4
180.6
Imm length of
protection tubeU1/l2
(in mm)
Imm. length l1 in mm
of fitting immersion,
tube type „Da“
73
110
170
73
110
170
260
410
73
110
170
73
110
170
260
410
63
100
160
63
100
160
250
400
Type „Ea“ (Abb. 1)
3 pieces tube brazed into
socket for non-ferrous
materials or welded for
steel, to be screwed in
Type „Ga“ (Abb. 2)
made of solid material
(1 piece)
to be screwed in
Type„CS“
„CS“(Abb.
(Abb.3)3)
Typ
made
of solid material
aus
Vollmaterial
(1 piece)
gedreht
to beEinschweißen
screwed in
zum
Thread connection Dimensions E/N
Materials
for Type:
0
DIN Form 8 = Type Ea
Immersion tube execution
DIN Form 8 = SIKA
Type Ea =
DIN Form 9 = SIKA
Type Ga=
DIN (old) Form CS = SIKA Type CS=
89
126 G1/2
186
93
130
190 G 3/4
280
430
89
126 G1/2
186
93
130
190 G 3/4
280
430
89
126 G1/2
186
93
130
190 G 3/4
280
430
2
Ea
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
073
110
170
073
110
170
260
410
073
110
170
073
110
170
260
410
063
100
160
063
100
160
250
400
G 1/2
M 20 x 1,5
G 3/4
M 27 x 2
Code-Nr. 179.2
DIN Form 9 = Type Ga
=
=
=
=
2
7
3
9
: Precision Steel
2.0401 - CuZn39Pb3 (MS 58)
or 2.0402 - CuZn40Pb2
Tube SoMs 76 or Ms 63
brazed
: 2.0401 - CuZn39Pb3 (MS 58)
or 2.0402 - CuZn40Pb2
: 1.0718 - 11SMnPb30+C
: 1.4571 - X6CrNiMoTi17122
: Hex. nut 2.0540 - CuZn35Ni2 (SoMs 59)
Tube 2.0460 - CuZn20AI2 (SoMs 76)
: 2.0540 - CuZn35Ni2 (SoMs 59)
2.0882 - CuNi30Fe
1.7335 - 13 CrMo44
: 1.0460 - C22.8
: 1.7335 - 13CrMo44
: 1.7380 - 10CrMo910
: 1.5415 - 16Mo3
Ga
Ga
Ea, Ga, CS
Ea
Ga
CS
CS
CS
CS
Code-Nr. 179.4
=
0
=
1
=
=
=
1
2
3
=
=
=
=
=
=
=
=
4
15
5
7
6
7
8
9
Type CS= DIN 16179 (old version)
Code-Nr. 180.6
Dimensions for Form 8 = Ea Form 9 = Ga Form CS
Thread
E/N
Code
Nr.
G 1/2
2
M 20 x 1,5
7
G 3/4
3
M 27 x 2
9
d1
D1
26
F1
14
F2
17
K1
14
K2
12
SW
27
11
32
14
19
16
14
32
d1
d1
d9
h11
G 1/2
11
M 20 x 1,5
11
h6
24
12
39
24
12
39
G 3/4
11
30
14
45
M 27 x 2
11
30
14
45
See pages 15 and 16 for pressure loads and works certificates.
1
h2
) Hex. nut 2.0401 - CuZn39Pb3 oder 2.0402 - CuZn40Pb2, tube SoMs 76 or Ms 63 brazed.
Dimensions of Protecting tube
Form 8 + 9
L
±1
U1
±1
G
+1
101
73
46
138
110
133
198
170
193
288
260
283
SIKA Thermometers
Immersion Tube Type „Dc“, Union nut M 24 x 1.5
Casing 200 x 36mm gold-coloured anodized
DIN 16189F
Order-Example
271
straight
5 64 1
155
8
A
Type
271
272
273
Immersion tube type
Ø 6,5 mm = Dc
Ranges
1
Type
271 Dc
5
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
64
35
06
10
12
16
20
30
40
50
60
Columns (Filling)
up to +200°C (red fluid for -60°C + 40°C) Fü
beyond +200°C, only mercury is used
HG
Immersion tube lengths l3 in mm
Immersion tube lengths match protecting
tubes acc. to DIN 43763 D;
see page 14 for this.
Union nut of brass M 24 x 1.5
Immersion tube materials: nipple MS58/tube St.
1
2
=
=
1
2
155
215
275
295
355
415
=
=
=
=
=
=
Type
272 Dc
155
215
275
295
355
415
=
8
A
On principle, thermometers of type „Dc“ are supplied with a steel tube of dia. 6.5
mm for the lower part of the capillary, and which fits into protecting tubes with
7 mm bore, in order to protect the capillary and to prevent glass particles to penetrate into the bore of the protecting tube if glass breakage occurs.
Type
273 Dc
Protecting Tubes (Weld-in Type)
DIN 43772 Form 4
for SIKA-Thermometers
with Immersion Tube Type „DC“
Order-Example
180.9 001
0
3
Protecting tube to
be welded
Abb1.
Form 4 = 180.9
SIKA
Type
Protection Tube
length „L“
D1
140
=001
0
D2
200
=002
0
D4
200
=004
0
D5
260
=005
0
Materials:
1.4571 - X6CrNiMoTi17122
1.0460 - C22.8
1.7335 - 13CrMo44
1.7380 - 10CrMo910
1.5415 - 16Mo3
=
=
=
=
=
3
6
7
8
9
The protecting tubes D 1 - D 4 are supplied upon request with a bore d3 = 3.5 mm,
d1 = 18 mm h7, d2 = 9 mm and female thread M 14 x 1.5 = SIKA Form „DS“
d1
N
D
DS
D
DS
D
DS
D
DS
140
200
200
260
65
125
65
125
24h7
24h7
24h7
24h7
18h7
18h7
18h7
18h7
12,5
12,5
12,5
12,5
9
9
9
9
7
7
7
7
3,5
3,5
3,5
3,5
M 14 x 1.5
F3
Free imm.
length U
M 18 x 1.5
F2
Prot. tube
length „L“
Order-Example: Protecting tube length „L“ = 140 mm
Material 1.4571 180.9.001.03 S
Accessoires:
Screw plug M 18 x 1.5 , brass (Abb. 2)
Order-No. 000061
Screw plug M 14 x 1.5, brass
Order-No. 0000G1
Double threaded nipple M 18 x 1.5 / M 24 x 1.5, Steel (Abb. 3)
Order-No. 00076 V
Extension tube 165 mm, M 18 x 1.5 / M 24 x 1.5, Steel (Abb. 4)
Order-No. 165020V
Acceptance certificate for material:
EN 10204/3.1 B EN 10204/3.1 A
The immersion lengths (l3) of the thermometers are as follows:
Form
with extension tube
with double threaded nipple
D1
D2/4
D5
295 mm
355 mm
415 mm
155 mm
215 mm
275 mm
Type HD
Table of Materials
The manufacture of SIKA protecting tubes is regularly controlled by the
„TÜV Hessen“ (technical inspection service) and meets the requirements
of AD/HP O.
Please inquire if you need protecting tubes made of other materials, with flange connection or PTFE coating.
Upon request, each protecting tube can be put to a pressure test or test for surface cracks, at extra charge;
a Certificate DIN 50049-3.1.B/EN 10204 will be supplied.
Table of Materials (on stock)
2.0401
CuZn39Pb3
or 2.0402
CuZn40Pb2
(MS58)
CodeNr.
Ei
Ea
Gi
Ga
Steel
Precision.
Steel
1.0718
9SMPb28K
1
0
2
z
z
z
z
z
z
1)2)
1)2)
1)
1.4571
X6CrNiMo
TIi17122
4
5
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
1)
z
z
1)
1)
CS
BS
HD
HDo
1) Only with Works Certificate DIN 50049/2.1 or 2.2 is possible.
2.0882
CuNi30Fe 1)
3
1)
1)
SoMs76CuZn20Al
(SoMs59
CuZn35Ni) 2)
1)
1)
1)
1)
1.0460
C.22.8
1.7335
13CrMo44
6
7
z
z
z
z
z
z
z
z
z
z
1.7380
10CrMo910
8
1.5415
15Mo3
9
SoMs 59
15
1)
1)
1)
1)
z
z
z
z
z
z
z
z
z
z
2) Hexagon Ms 58/tube SoMs 76 or MS63 brazed.
Select the most suitable material for your application. Please see FNE and VDE because some materials may be precluded from certain application.
SIKA protecting tubes can be supplied with following Certificates, at extra charge:
DIN 50049-2.1*) DIN 50049-2.2*) DIN 50049-2.3*) DIN 50049-3.1.A*) DIN 50049-3.1.B*)
*) EN 10204
DIN 50049-3.1.C*)
Installation Instructions
According to specifications of the Institute of German Engineers. Weld-in protecting tubes (DIN 43 763, DIN 16179) to be
welded so that cylindrical part does not enter into medium to be measured or into cross section of conduit.
Installation Examples
Type „B“
Type „Ga“
Installation
correct
Type „HDo“
Installation
wrong
Explanations
This catalogue offers different types of protecting tubes
which protect SIKA thermometers against hazards of mechanical, thermal or chemical nature. The protecting tubes
permit removal or installation of thermometers during operation.
Special attention is drawn to the fact that all SIKA thermometers with immersion tubes “B” (threaded socket with integral hexagonal nut) are adjusted at complete immersion
length. These immersion tubes must be totally immersed
in the medium to be measured. Should this not be possible, and less than full immersion depth has to used, these
special conditions have to be specified to avoid inaccurate
reading.
For best results, thermometers with at least 63 mm immersion tubes are recommended. On pipe conduits of less than
100 mm dia., the whole width of conduit should be used.
On bigger sizes, reaching the centre of the conduit is sufficient.
SIKA-Thermometers
Special Types
Type 277
200 x 36 mm with
suspension ring
on top
Tank Scooping
Thermometers
Order-Code: 277 0 12 11 000 00
with short, perforated
reservoir
white-backed, 0 up to +120°C
blue liquid
Type
278
Order-Code:
Type 278
200 x 36 mm with
suspension ring
on top
Ambient Measuring
Thermometers
-30 up to +50°C= 278 0 35 11 000 00
no lower part
white-liquid,
blue liquid
0 up to +100°C= 278 0 10 11 000 00
-30 up to +50°C
0 up to +100°C
Special Executions of SIKA Thermometers (at extra charge)

Blue shining mercury filling. Can
only be supplied for temperatures
up to+400° C

Thermometer with two limit indicators
which can be adjusted to any interval

Immersion tubes brass or steel
nickel plated

Casing silver-coloured
Thermometer with grommet which
prevents moisture from entering
into the immersion tube (outdoor
installation)

Thermometer without any parts of
brass, bronze or similar materials

SIKA industrial thermometers
complete stainless steel
Thermometer with
Limit Indicators
Grommet
Type
277
Thermometer Inserts
(Replacement inserts)
Order-Example
271
straight
2 64 1
1
063
Type
174
291
271
175
292
272
176
293
273
angle 90°
angle 135°
Attention:
The exact order
text is marked
at back of capillary:
type, range,
immersion length.
for thermometers
with solid male thread
„B“
„Bdr“
2
6
with union nut
„Da“
„
Dc“
3
5
Ranges
Division
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
64
35
06
10
12
16
20
30
40
50
60
Celsius (°C)
Columns (Filling)
HG =
1
2
1
2
Immersion lengths l1 and l3, respectively, in mm
(according to complete thermometers)
for types „B“ (threaded socket with integral hexagonal nut)
for types „Da“
with union nut G 1/2 or G 3/4
for types „Dc“
with union nut M 24 x 1.5
30
40
63
100
160
250
400
89
93
126
130
186
190
276
280
426
430
155
215
275
295
355 Monting material will be supplied.
Spare Parts
Thermometer Casings
Order-Example
Execution
straight
angle 90°
angle 135°
straight
angle 90°
angle 135°
straight
angle 90°
angle 135°
271
0 64 1
Type
271
272
273
291
292
293
174
175
176
200 x 36 mm
200 x 36 mm
200 x 36 mm
150 x 36 mm
150 x 36 mm
150 x 36 mm
110 x 30 mm
110 x 30 mm
110 x 30 mm
Ranges
0
0
0
0
0
0
0
0
0
-60+40°C =
-30+50°C =
0+60°C =
0+100°C =
0+120°C =
0+160°C =
0+200°C =
0+300°C =
0+400°C =
0+500°C =
0+600°C =
64
35
06
10
12
16
20
30
40
50
60
Celsius + Fahrenheit (°C+ °F)
Immersion tube „B“
for straight or angle type
thermometers 135°
1
2
Immersion tubes with threaded socket
and integral hexagonal nut, type „B“
Order-Example
030
Immersion length l1 in mm
30 =
40 =
63 =
100 =
160 =
250 =
400 =
Thread
G 3/8 A
G 1/2 A
G 3/4 A
G 1A
M 16 x 1,5
M 20 x 1,5
M 27 x 2
2
1
1
030
040
063
100
160
250
400
=
=
=
=
=
=
=
1
2
3
4
5
7
9
Brass (hex.nut MS 58/tube special brass Ms76 or
MS63 or up to immersion length l1= 63 only by G 1/2
available in MS58 solid material steel
1
Steel (hex.nut 9SMnPb28K/tube St. 35)
2
Stainless Steel 1.4571=
3
Hex.nut SoMs 59, tube Ms 76=
4
CuNi30Fe=
5
Straight type or angle type 135°
Angle type 90°
1
2
Casing
Immersion tube „B“
for angle type
thermometers 90°