Rental Catalog NMC 2010.indd

NMC CAT IS THE ONE SOURCE FOR
ALL YOUR RENTAL NEEDS
Power Systems and Cat Rental Stores join forces to create solutions
to meet all your rental requirements.
24 Hr. Emergency Service: 800-628-6025
NMCCAT.COM
Table of Contents
AERIAL LIFTS
GENERATORS/POWER
Boom Lifts ...................................................................................... 44
Scissor Lifts .................................................................................... 44
Amperage Chart ............................................................................... 1
Diesel Generators: 30kW - 2000kW ........................................... 2, 3
Load Banks ....................................................................................... 7
Uninterruptible Power Supply .......................................................... 7
AIR COMPRESSORS
Diesel Air Compressors: 185 - 375 cfm ........................................ 45
Diesel Air Compressors: 185 - 1600 cfm ...................................... 26
Oil Free Air Compressor: 1550 cfm ............................................... 27
Air Hose.......................................................................................... 27
AIR CONDITIONERS
Air Conditioner:
Air Conditioner:
Air Conditioner:
Air Conditioner:
Air Conditioner:
Air Conditioner:
1 - 5 Ton ................................................................ 8
12 Ton ................................................................... 9
20 Ton (Entertainment Unit)................................ 10
30 Ton ................................................................. 11
30 Ton Optional Heater Attachment................... 12
80 Ton ................................................................. 13
CHILLERS
Air Handlers ................................................................................... 15
Chillers - Air Cooled ....................................................................... 14
Chillers - Water Cooled.................................................................. 14
Cooling Towers............................................................................... 15
Plate and Frame Heat Exchangers ................................................. 16
Shell & Tube Heat Exchangers....................................................... 16
COMPACT EQUIPMENT
Compact Track Loaders .................................................................. 33
Compact Wheel Loaders/Integrated Toolcarriers.......................... 35
Mini Hydraulic Excavators ............................................................. 30
Multi Terrain Loaders ..................................................................... 29
Skid Steer Loaders ......................................................................... 28
Telehandlers ................................................................................... 37
DEHUMIDIFIERS
Desiccant Dehumidifiers ................................................................ 23
GENERAL EQUIPMENT
Brooms ........................................................................................... 43
Dump Trucks ................................................................................... 42
Industrial Forklifts .......................................................................... 37
Light Towers ................................................................................... 46
Portable Cut-Off Saws ................................................................... 47
Rammers ........................................................................................ 48
Trailers............................................................................................ 43
Trenchers ........................................................................................ 47
Trench Rollers................................................................................. 47
Vibratory Plates .............................................................................. 48
Walk Behind Trowels ..................................................................... 48
Water Trucks .................................................................................. 42
Welders .......................................................................................... 45
GENERATOR/POWER ACCESSORIES
Automatic Transfer Switches........................................................... 4
Cables .............................................................................................. 6
Cable Ramps .................................................................................... 6
Electrical Panels ............................................................................... 4
Fuel Tanks......................................................................................... 5
Transformers .................................................................................... 5
HEATERS
Direct Fired ..................................................................................... 21
Electric...................................................................................... 17, 22
Heater Attachment......................................................................... 12
Indirect ......................................................................................18-19
Make-up Air ................................................................................... 20
Maxi Heater ................................................................................... 22
HEAVY EQUIPMENT
Articulated Trucks .......................................................................... 41
Backhoe Loaders ............................................................................ 36
Hydraulic Excavators ...................................................................... 31
Motor Graders ................................................................................ 40
Rotary Mixers ................................................................................. 40
Soil Compactors ............................................................................. 38
Track Loaders ................................................................................. 33
Track Type Tractors ......................................................................... 32
Vibratory Asphalt Compactors ....................................................... 39
Vibratory Soil Compactors ............................................................. 38
Wheel Excavators .......................................................................... 31
Wheel Loaders ............................................................................... 34
Wheel Tractor Scrapers ................................................................. 41
PUMPS
Submersible Pumps........................................................................ 49
Towable Water Pumps ................................................................... 49
Trash Pumps ................................................................................... 49
TEMPERATURE CONTROL ACCESSORIES
Electric HVAC Pumps ..................................................................... 24
Chiller Hose .................................................................................... 24
Flexible Duct................................................................................... 25
Tent Air Boxes ................................................................................ 25
TRENCH SHORING EQUIPMENT
Aluminum Boxes ............................................................................ 46
Bedding Boxes................................................................................ 46
Manhole Boxes .............................................................................. 46
Street Plates................................................................................... 46
Trench Boxes .................................................................................. 46
Amperage Chart
Power
kVA/kW Amperage Chart
80% Power Factor
kW
208 V
220 V
240 V
380 V
440 V
480 V
600 V
6.3
9.4
12.5
5
7.5
10
17.5
26.1
34.7
16.5
24.7
33
15.2
22.6
30.1
9.6
14.3
19.2
8.3
12.3
16.6
7.6
11.3
15.1
6.1
9.1
12
18.7
25
31.3
15
20
25
52
69.5
87
49.5
66
82.5
45
60.2
75.5
28.8
38.2
48
24.9
33.2
41.5
22.5
30.1
37.8
18
24
30
6
7.5
4.4
5.5
3.5
4.4
37.5
50
62.5
30
40
50
104
139
173
99
132
165
90.3
120
152
57.6
77
96
49.8
66.5
83
45.2
60
76
36
48
61
9.1
12.1
15.1
6.6
8.8
10.9
5.2
7
8.7
75
93.8
100
60
75
80
208
261
278
198
247
264
181
226
240
115
143
154
99.6
123
133
91
113
120
72
90
96
18.1
22.6
24.1
13.1
16.4
17.6
10.5
13
13.9
125
156
187
100
125
150
347
433
520
330
413
495
301
375
450
192
240
288
166
208
249
150
188
225
120
150
180
30
38
45
21.8
27.3
33
17.5
22
26
219
250
312
175
200
250
608
694
866
577
660
825
527
601
751
335
384
480
289
332
415
264
301
376
211
241
300
53
60
75
38
44
55
31
35
43
375
438
500
300
350
400
1040
1220
1390
990
1155
1320
903
1053
1203
576
672
770
498
581
665
451
527
602
361
422
481
90
105
120
66
77
88
52
61
69
625
750
875
500
600
700
1735
2080
2430
1650
1980
2310
1504
1803
2104
960
1150
1344
830
996
1274
752
902
1052
602
721
842
150
180
210
109
131
153
87
104
121
1000
1125
1250
800
900
1000
2780
3120
3470
2640
2970
3300
2405
2709
3009
1540
1730
1920
1330
1495
1660
1203
1354
1504
962
1082
1202
241
271
301
176
197
218
139
156
174
1563
1875
2188
1250
1500
1750
4350
5205
4130
4950
3765
4520
5280
2400
2880
3350
2080
2490
2890
1885
2260
2640
1503
1805
2106
376
452
528
273
327
380
218
261
304
2500
2812
3125
2000
2250
2500
6020
6780
7520
3840
4320
4800
3320
3735
4160
3015
3400
3765
2405
2710
3005
602
678
725
436
491
546
348
392
435
3750
4375
5000
3000
3500
4000
9040
10550
12040
5760
6700
7680
4980
5780
6640
4525
5285
6035
3610
4220
4810
904
1055
1204
654
760
872
522
610
695
Rental 1
2400 V 3300 V
4160 V
Power
kVA
30kW - 2000 kW Generator Sets
Power
20kW - 2000 kW Generator Sets
Generator sets come self-contained, with trailer or skid-mounted
fuel-tank bases for easy travel and delivery. Units range from
30kW portable units to 2MW power modules with utility-grade
switchgear. Sound-attenuated XQ modules are quiet and all
equipment is EPA certified.
From building construction and disaster relief, to concertstage lighting and peak-time utility power – NMC CAT has the
equipment to fit your needs.
SPECIFICATIONS
Model
Generator Set
Fuel Consumption
Tank Capacity (gal)
Electrical
Weight (With Trailer)
Dimensions (With Trailer)
20 kW
100% load = 1.5
75% load = 1.2
50% load = 0.9
45
69 amps at 208 v.
30 amps at 480 v.
6,480 lbs
6.3’W x 7.3’H x 15.4’L
30 kW
100% load = 2.4
75% load = 1.8
50% load = 1.3
58.6
104 amps at 208 v.
45 amps at 480 v.
6,480 lbs
6.3’W x 7.3’H x 15.4’L
80 kW
100% load = 6.0
75% load = 4.80
50% load = 3.6
167
278 amps at 208 v.
120 amps at 480 v.
8,120 lbs
6’9”W x 7’8”H x 16’L
100 kW
100% load = 7
75% load = 5.25
50% load = 3.5
182
347 amps at 208 v.
150 amps at 480 v.
8,470 lbs.
6’9”W x 7’8”H x 16’L
150 kW
100% load = 11.2
75% load = 8.5
50% load = 5.9
210
520 amps at 208 v.
225 amps at 480 v.
12,0000 lbs
7’W x 8’4”H x 17’4”L
230 kW
100% load = 18.3
75% load = 13.4
50% load = 9.1
400
781 amps at 208 v.
330 amps at 480 v.
16,550 lbs
8.4’W x 9.5’H x 20.5’L
300 kW
100% load = 23.5
75% load = 16.8
50% load = 11.8
400
1040 amps at 208 v.
451 amps at 480 v.
16,550 lbs
8.4’W x 9.5’H x 20.5’L
Rental 2
30kW - 2000 kW Generator Sets
Power
20kW - 2000 kW Generator Sets
Applications:
• Standby Power
• Prime Power
• Parallel Load Sharing and Peak Shaving
• Major Utility Installations
• UPS Quality Power
• Rental Power for Special Events
SPECIFICATIONS
Model
Generator Set
Fuel Consumption
Tank Capacity
Electrical
Weight (With Trailer)
Dimensions
100% load = 28
75% load = 21
50% load = 14
520
800 kW
100% load = 56
75% load = 42
50% load = 28
1000
1250 kW
100% load = 88
75% load = 66
50% load = 44
1000
4350 amps at 208 v.
1885 amps at 480 v.
62,000 lbs
40’ Container
1750 kW
100% load = 122
75% load = 91
50% load = 61
1250
2625 amps at 480 v.
66,500 lbs
40’ Container
2000 kW
100% load = 140
75% load = 105
50% load = 70
1250
3000 amps at 480 v.
74,000 lbs
40’ Container
1390 amps at 208 v.
602 amps at 208 v.
2780 amps at 208 v.
1203 amps at 480 v.
Rental 3
20,458 lbs
40,000 lbs
8.5’W x 10.8’H x 22.2’L
8.5’W x 13.5’H x 30’L
Power
400 kW
Accessories
Power
Electrical Panels
NMC Cat’s 60 - 1200 amp panels provide
outlets for a wide range of applications
such as plant maintenance or shutdowns.
TECHNICAL DATA
Size
Type
Voltage
Description
60 Amp
15 kVa E-Carts
120/240/60/1
6 - 120 Volt Plugs
100 Amp
Cube
120/208/60/3
Cam-lock Input with 5 QBS Receptacles
200 Amp
Cube
120/208/60/3
Cam-lock Input with 10 QBS Receptacles
200 Amp
Panel
120/208/60/3
Cam-lock Input with 10 QBS Receptacles &
Hard Wire Capability
400 Amp
Cube
120/208/60/3
Cam-lock Input with (4) 100 Amp Outputs
400 Amp
Panel
120/208/60/3
Cam-lock Input with 12 QBS Receptacles, 200 Amp
Cam-Lock Output & Hard Wire Capability
1200 Amp
I-Line Panel
120/208/60/3
Automatic Transfer Switches
Our 100 amp - 3000 amp transfer switches provide a safe
way to distribute power.
TECHNICAL DATA
Size
Voltage
Connections
100 Amp
120/208/60/3
Cam-lock or Hard Wire
200 Amp
277/480/60/3
Cam-lock or Hard Wire
400 Amp
120/208/60/3 & 277/480/60/3
Cam-lock or Hard Wire
600 Amp
120/208/60/3 & 277/480/60/3
Cam-lock or Hard Wire
800 Amp
277/480/60/3
Cam-lock or Hard Wire
1200 Amp
120/208/60/3 & 277/480/60/3
Cam-lock or Hard Wire
3000 Amp
277/480/60/3
Hard Wire
Rental 4
277/480/60/3
Various Outputs
Accessories
Power
Transformers
Transformers provide multiple voltage connections. They
can be used to increase or decrease voltage, supply
power to your power grid and isolate your critical loads.
Our transformers are set up specifically for rental and
include cam-lock inputs and outputs, fork pockets and
reinforced sub frame with lifting eyes.
TECHNICAL DATA
Size
Connections
Voltage
480 - 120/208 Y
Cam-lock
45 KVA
480 - 120/208 Y
Cam-lock
75 KVA
480 - 120/208 Y
Cam-lock
112.5 KVA
480 - 120/208 Y
Cam-lock
150 KVA
480 - 120/208 Y
600 - 480
Cam-lock
225 KVA
480 - 120/208 Y
Cam-lock
300 KVA
480 - 120/208 Y
600 - 480
Cam-lock
500 KVA
480 - 120/208 Y
Cam-lock
1000 KVA
4160/2400 - 277/480
600 - 480
Two Hole Lug
1500 KVA
4160/2400 - 277/480
Two Hole Lug
2500 KVA
Primary: 2400/4140/7200/12000-14400
Secondary: 277/480
Two Hole Lug
Power
30 KVA
Fuel Tanks
SPECIFICATIONS
Size
Type
560 Gal
Diesel
2500 Gal
Diesel
5000 Gal
Diesel
Rental 5
Accessories
Power
Cables
Our 4/0 cam-lock single conductor cables used individually
provide up to 400 amp loads and in parallel for larger load
requirements. Size #2 cam-lock singe conductor cables are
used to provide up to 150 amp loads.
4/0 Cam-lock
#2 Cam-lock Banded
CABLES
Size
Length
Weight
Capacity
Class
4/0 Cam-lock
5’ - 20’ - 50’
1 lb / ft
400 amps
600 v
Quad Box Strings
60’
10/20/20/10
25 lbs
20 amps
600 v
30 lbs
20 amps
600 v
.7 lb / ft
60 amps
600 v
75’
QBS Extensions
50’ - 100’
6/4 S/O Cord
Quad Box Strings and Quad Box
Extensions are used to provide 120 v.,
20 amp power circuits.
Cable Ramps
Protect many types of cables, up to 1.25” diameter.
Combine units with interlocking design.
Size
5 Channel
Length
36”
Width
Height
Load Capacity
20”
2.31”H
20,150 lbs.
Rental 6
Load Banks / UPS
Power
Container Resistive / Reactive
Load Banks (up to 3000 kW)
Load Banks are devices designed to provide electrical
loads for testing power sources such as generators and
Uninterruptible Power Supplies (UPS). Load banks are also
used to reduce “wet stacking” problems in diesel engines
of backup generating systems.
Portable resistive load banks range in size from 10 kW to
700 kW. For larger ratings, we can provide trailer mounted
models for most load testing requirements at remote sites.
SPECIFICATIONS
Model
kW
Minimum Load
Step Resolution
Load Voltage
10 kW
0.25 kW
120 VAC; 120 / 240 VAC; 1 phase
Liberty LPH
55 - 75 kW
1 kW
Freedom LPH
100/93.75 kW
Millennium LPH
Weight
18” L x 13” W x 11” H
35 lbs.
240 / 480 VAC; 3 phase
23” L x 13” W x 24” H
69 lbs.
5 kW
240 / 480 VAC; 3 phase
300 / 600 VAC
25” L x 16.25” W x 29.12” H
105 lbs.
250 or 400 kW
5 kW
240 / 480 VAC; 3 phase
600 VAC; 3 phase
56” L x 34” W x 52” H
800 lbs.
Patriot LPV
500 kW or 700 kW
5 kW
240 / 480 VAC; 3 phase
600 VAC; 3 phase
61” L x 34” W x 75” H
1,150 lbs.
LTV 1500
1500 - 2000 kW
5 or 50 kW
480 VAC; 3 phase
600 VAC; 3 phase
188” L x 93” W x 118” H
6,000 lbs.
LTV 2500
2500 - 3000 kW
5 or 50 kW
480 VAC; 3 phase
600 VAC; 3 phase
208” L x 93” W x 118” H
7,500 lbs.
Uninterruptible Power Supply (UPS)
The Cat UPS works by storing enough energy to ride through power
disturbances such as dips or surges in voltage and/or
current. Match the UPS with a Cat generator set to
provide long-term backup during an outage or extended power
reliability situation.
Rental 7
Power
K490
Size
1 - 5 Ton Air Conditioners
Temperature Control
1 - 5 Ton Air Conditioning Units
Portable air conditioning units can be set up in minutes
with their portable and convenient design. These units
quietly cool without adding background noise. Ideal for
supplemental or temporary cooling in offices, meeting
areas or classrooms.
SPECIFICATIONS
Size
1 Ton
1.5 Ton
5 Ton
Length/Width/Height (in.)
26 x 20 x 34
29 x 28 x 41
42 x 30 x 70
Cooling Capacity: BTU/HR
14,000
18,000
78,000
115/60/1/15
115/60/1/15
230/60/1/60
Total Power Consumption (kW)
1.3
1.4
8.7
Current Consumption
11.7
12.0
37.8
Power Supply: Volts/Hertz/Phase/Amps
NEMA Plug Type
5-15P
5-15P
wired
Evaporator CFM
350
600
2,300
Condenser CFM
500
1,000
3,900
Maximum Duct Length (ft.)
40
40
40
65-105
65-110
65-110
160
230
650
Operating Limits (min. - max) °F
Net Weight (lbs.)
Rental 8
12 Ton Air Conditioner
Temperature Control
12 Ton Air Conditioner
NMC CAT 12 ton air conditioning units are self-contained and
provide conditioned air for indoor or outdoor rental applications.
Units are sound attenuated and are equipped with high efficiency
scroll-type compressors which allow for cold starting–no preheat
required. Units feature rental friendly controls to meet the needs
of the non-technical operator. Units are designed in accordance
with industry guidelines and third party safety and quality
standards.
Total shipping weight ....................................................................1200 lbs
Duct connections...............................................................................13.75”
Filters (reusable)...............................................................2” x 15” x 20” (4)
Power supply ...............................230 or 480 volt (please consult your rep)
3 phase/60 HZ with ground
Model ...................................................................................... Stealth 12
Dimensions
Length..........................................................................................64”
Width...........................................................................................44”
Height ...................................................................................... 67.5”
TECHNICAL DATA
Electrical Data
Total full load or running load
96.3 amps at 230 volts
45.7 amps at 480 volts
System Control
Discharge air temperature control
Return air temperature control
Standard
Standard
Fan Data
Design air flow/maximum air flow
Design total static pressure
Fan type
Motor hp/speed
4050 cfm
3.25 in wg
Centrifugal
5 hp/1750 rpm
Cooling Data
Design capacity
Entering air temp (dry bulb/wet bulb)
Leaving air temp (dry bulb/wet bulb)
Coil construction
Rows
Fins per inch
12 tons
90/70 °F
63.5/59.6 °F
Copper Tube/Aluminum fins
4
12
Compressor Data
Type
High Efficiency Scroll
Rental 9
Temperature Control
SPECIFICATIONS
20 Ton Air Conditioner
Temperature Control
20 Ton Air Conditioner
(Entertainment Unit)
Our entertainment units (20 ton air conditioning units) are selfcontained and provide conditioned air for indoor or outdoor rental
applications. Units are sound attenuated and are equipped with high
efficiency scroll-type compressors which allow for cold starting–no
preheat required.
Applications:
• Temporary Structure
• Event Cooling & Optional Heating
SPECIFICATIONS
Model ...................................................................................... Stealth 20
Dimensions
Length..........................................................................................89”
Width...........................................................................................37”
Height ....................................................................................... 100”
Total shipping weight ................................................................... 2700 lbs
2 Duct connections at 19.25” each on top or wall mount connection
Power supply ................................................................... 480 volt/3phase/
60 HZ with ground
TECHNICAL DATA
Electrical Data
Breaker
Cooling load
Heating load
Dehumidification load
Connection
125 amps
57 amps
47 amps
95 amps
Cam-lock in/out for daisy chain set up
System Control
Remote Temperature Control
Discharge air temperature control
Return air temperature control
Standard
Standard
Standard
Fan Data
Design air flow/maximum air flow
Design total static pressure
Fan control
10,000 cfm
3.25 in wg
VFD
Cooling Data
Design capacity
Entering air temp (dry bulb/wet bulb)
Leaving air temp (dry bulb/wet bulb)
Coil construction
Low ambient control
20 tons
90/70 °F
63.5/59.6 °F
Copper Tube/Aluminum fins
VFD
Compressor Data
Type
2 X High Efficiency Scroll
Electric Heat
30 kW
Rental 10
30 Ton Air Conditioner
Temperature Control
30 Ton Air Conditioner
Applications:
• Cooled Air for Confined Spaces
• Dense Air Injection
• Large Motor Cooling
• Temporary Structure
• Event Cooling & Optional Heating
Total shipping weight ....................................................................4900 lbs
Duct connections....................................................................................19”
Filters (reusable) 6 ea...................................2” x 24” x 24” (30% efficient)
Power supply .....................................460 volt/3 phase/60 HZ with ground
Model ...................................................................................... Stealth 30
Dimensions
Length..........................................................................................96”
Width...........................................................................................66”
Height ....................................................................................... 102”
TECHNICAL DATA
Electrical Data
Total full load or running load
67 amps
System Control
Remote temperature control
Discharge air temperature control
Return air temperature control
Standard
Standard
Standard
Fan Data
Design air flow/maximum air flow
Design total static pressure
Fan type
Fan control
Motor hp/speed
10,000 cfm
3.25 in wg
Centrifugal
VFD
10 hp/862-1725 rpm
Cooling Data
Design capacity
Entering air temp (dry bulb/wet bulb)
Leaving air temp (dry bulb/wet bulb)
Coil construction
Rows
Fins per inch
Low Ambient Control
30 tons (2 Stage)
90/70 °F
63.5/59.6 °F
Copper Tube/Aluminum fins
3
10
Hot gas bypass
Heating Data (Optional)
Type
Capacity
Heating
Electric
150 kW
500 MBH
Compressor Data
Type
High Efficiency Scroll
Rental 11
Temperature Control
SPECIFICATIONS
30 Ton Heater Attachment
30 Ton DX Unit - Optional 150 kW
Heater Attachment
This heater is designed for use with NMC Cat’s 30 ton DX unit.
The unit has a flanged opening that connects to the supply
air output of the 30 ton DX unit. It uses the 10,000 CFM VFD
blower of the 30 ton DX unit as the air flow source.
SPECIFICATIONS
Model......................................................150kW Electric Heater Attachment
Dimensions
Height.......................................................................................56”
Width.........................................................................................48”
Depth........................................................................................26”
Weight (approx).................................................................500 lbs
TECHNICAL DATA
Electrical Data
460 volt/3 phase/60 Hertz
225 amp 600 volt single pole mount receptacles
180 FLA
Heat Control
Programmable Logic Control
160° Temp Internal Thermostat
103° Temp Remote Thermostat
On/Off Switch
Machine Control
On/Off/Heat Switch
75 or 150 kW operation
Indicator lights (power/air flow/heat/over temp)
General
Powder coated steel construction
Fork lift pockets
Rental 12
Temperature Control
80 Ton Air Conditioner
Temperature Control
80 Ton Air Conditioner
Applications:
• Cooled Air for Confined Spaces
• Dense Air Injection
• Large Motor Cooling
• Temporary Structure
• Event Cooling & Optional Heating
• Furnace Cooling
Model ...................................................................................... Stealth 80
Dimensions
Length........................................................................................182”
Width...........................................................................................96”
Height ....................................................................................... 109”
Total shipping weight .................................................................10,300 lbs
Duct connections.................................................................................19.2”
Filter (reusable) ...............................................................2” (30% efficient)
Power supply ......................................460 volt/3phase/60 HZ with ground
TECHNICAL DATA
Electrical Data
Cooling load
Heating load
Minimum circuit ampacity (cooling only)
179 amps
192 amps
179 amps
System Control
Outside air damper
Discharge air temperature control
Return air temperature control
Manual
Standard (4 x 20” Supply Air Duct)
Standard (4 x 20” Return Air Duct)
Fan Data
Design air flow/maximum air flow
Design total static pressure
Fan control
Motor hp/speed
28,000 cfm
4 in wg
VFD
30 hp/1725 rpm
Cooling Data
Design capacity
Entering air temp (dry bulb/wet bulb)
Leaving air temp (dry bulb/wet bulb)
Coil construction
Rows / Fins per inch
75 tons
80/67.0 °F
55.7/54.0 °F
Copper Tube/Aluminum fins
8/8
Heating Data
Type
Capacity
Heating
Electric
130kw
444 MBH
Compressor Data
Type
Crankcase heat
Screw
200 watts
Rental 13
Temperature Control
SPECIFICATIONS
Chillers
Temperature Control
Air Cooled & Water
Cooled Chillers
Applications:
• Alkylation (Alky) Cooling
• Wet Gas Compressor Cooling
• Concrete Cooling
• Dense Air Injection
• Environmental Control
• Plastic Production Processes
• Turbine Inlet Cooling
• Waste Water Treatment
SPECIFICATIONS: AIR COOLED CHILLERS
Size
Obtainable
Temperature
Min/Max
Flow GPM
Rated Line AMPS
480V
Length
Width
Height
Shipping Weight
30 ton
20°F
45/75
70
FLA
10’
4’6”
8’1”
4,340
lbs.
50 ton
0°F
75/250
125
FLA
11’2”
7’
8’2”
6,900
lbs
100 ton
0°F
127/600
225
FLA
21’
8’2”
9’
13,900
lbs
150 ton
0°F
188/747
320
FLA
21’
8’2”
9’
16,400
lbs
200 ton
0°F
272/747
450
FLA
30’
8’2”
9’
18,800
lbs
250 ton
20°F
272/800
500
FLA
30’
8’2”
9’
22,200
lbs
300 ton
20°F
500/1600
658
FLA
40’
8’
8’9”
40,000
lbs
450 ton
20°F
750/2400
987
FLA
50’
8’
8’9”
63,000
lbs
SPECIFICATIONS: WATER COOLED CHILLERS
Size
Obtainable
Temperature
Min/Max
Flow GPM
Rated Line AMPS
480V
Length
Shipping Weight
525 ton
20°F
700/2100
500
FLA
20’
ISO Container
39,000
lbs.
525 ton
20°F
700/2100
500
FLA
30’
ISO Container
39,000
lbs
500 ton
-40°F
600/1575
612
FLA
40’
ISO Container
39,000
lbs
Rental 14
Cooling Towers / Air Handlers
Temperature Control
Cooling Towers
Applications:
• Containment & Spent Fuel Pool Cooling
• Jacketed Reactor Cooling
• Large Motor Cooling
• Scrubber Cooling
• Supplemental Cooling Tower Water
Size
Temperature
Min/Max
Flow GPM
Length
Width
Height
Weight
260 ton
Max. Inlet 125°F
750 GPM
13’ 11”
7”3.5”
9”11”
9,745 lbs.
500 ton
95°F In / 85 °F Out
1500 GPM
24’.5”
7’11”
10’6”
15,590 lbs.
750 ton
95°F In / 85 °F Out
2250 GPM
48’
8’6”
13’6”
38,390 lbs.
Air Handlers
• Climate Control
• Comfort Heating
• Temporary Cooling
• Moisture Removal
Combine an air handler with a chiller to provide air
conditioning.
SPECIFICATIONS
Tonnage
120
Design Parameters
50°F leaving air temp with 95 DB / 75 WB EAT
Min/Max
Flow CFM
Length
Width
10,000 - 20,000
10’
7’
Rental 15
Height
9’ 4” with plenum
attached
Weight
4500 lbs
Temperature Control
SPECIFICATIONS
Heat Exchangers
Temperature Control
Shell & Tube Heat Exchangers
Single and double pass models available in either
carbon or stainless steel models. Used for process
cooling. NMC CAT can provide you with the right
exchanger for all your temperature limited needs.
Applications:
• Jacketed Reactor Cooling
• Alkylation (Alky) Cooling
• Conveyor Cooling
• Scrubber Cooling
• Plastic Production Processes
• Vapor Recovery & Liquefied Gas Storage
• Waste Water Treatment
TECHNICAL DATA
Size
Material
Tube Rating
Shell Rating
Length
Height
Weight
1600 sq. ft.
316 L Stainless Steel
115 psi @ 400°F
330 psi @750°F
18’6”
4’
16,000 lbs..
2125 sq. ft.
Carbon Steel
150 psi @ 300°F
150 psi @ 300°F
21’6”
5’6”
18,000 lbs.
Plate and Frame Heat Exchangers
Remove temperature limitations throughout process, replace
fowled exchangers and alleviate possible contaminants.
Additional exchangers available to meet all your pressure,
temperature and BTU requirements.
TECHNICAL DATA
Material
Pressure Rating
Weight
500
Stainless Steel
150 psi
5,000 lbs.
1000
Stainless Steel
150 psi
8,000 lbs.
1500
Stainless Steel
150 psi
12,000 lbs.
Tonnage
Rental 16
75/150 kW Electric Heaters
Temperature Control
75/150 kW Electric Heaters
Applications:
• Job Site/Construction Heat
• General/Building Heat
• Temporary Shelter
• Industrial Heat
• Commercial/Institutional Heating
• 100% Clean and Dry Heat
• 100% Efficient
• 100% Fume Free
Model ...............................................................................150 kW Heater
Dimensions
Length..........................................................................................94”
Width...........................................................................................34”
Height ......................................................................................... 65”
Weight............................................................................... 2000 lbs.
TECHNICAL DATA
Electrical Data
460 volt/3 phase/60 HZ
225 amp 600 volt single pole mount receptacles
185 FLA
Blower
Variable speed (440-1760 RPM) up to 10,000 CFM
Plenum fan arrangement
Belt Drive
19” diameter outlet flange
Optional 19” side air intake flange
Heat Control
Programmable
Logic Control
225° Temp Internal Thermostat
103° Temp Remote Thermostat
On/Off Switch
Machine Control
Hour meter
Phase monitor relay
75 or 150 kW operation
Indicator lights (power/phase failure/air flow/heat/over temp)
Blower speed control
General
Stainless steel construction
10” lockable castors
Fork lift pockets on all four sides
Rental 17
Temperature Control
SPECIFICATIONS
Indirect Fired Heater
Temperature Control
Indirect Fired Heater - 2000
Applications:
• Job Site/Construction Heat
• General/Building Heat
• Temporary Shelter
• Industrial Heat
• Commercial/Institutional Heating
• 100% Fume Free
• Natural gas, propane or fuel oil
SPECIFICATIONS
Capacity Gross
700,000 btu
Fuel Consumption
NG 675 CFH - LP 7 GPH
Capacity Net
615,000 btu
Fuel
NG/LP/Fuel Oil
Air Volume
6,500 cfm
Decibel Rating
77.5
Outlet Hose Diameter
24”
Weight
1,201 lbs.
Inlet Hose Diameter
24”
Dimensions
94.5” x 32” x 54”
Flue Connection
8”
Efficiency
88%
Duct Length
200 ft.
Pressure
1.7” NG 2.5” LP
Voltage
208 V / 3 phase
Outlet Temp
170˚ F
Frequency Hz
60
Heat Rise
130˚ F
Current
13 amps
Static Pressure
2.4
Chimney Loss
12%
Nozzle
3.7 NG
2.2 LP
100% clean and dry heat
Outlet temperature circa 104-158°F
Large heat throw
• High efficiency heat exchanger (92%).
• Weather resistant & lockable casing.
• High pressure fan for powerful heat
distribution.
• Recirculation hose flange possible.
• Combustion chamber heat resistant up to 850°C.
• Lower tray for oil containment during servicing.
Rental 18
Indirect Fired Heater
Temperature Control
Indirect Fired Heater - 4000
Applications:
• Job Site/Construction Heat
• General/Building Heat
• Temporary Shelter
• Industrial Heat
• Commercial/Institutional Heating
• 100% Fume Free
• Natural gas, propane or fuel oil
Capacity Gross
1,380,000 btu
Current
30 amps
Capacity Net
1,214,400 btu
Chimney Loss
12%
Air Volume
14,125 cfm
Fuel Consumption
NG 1,314 CFH - LP 15 GPH
Outlet Hose Diameter
2 x 24”
Fuel
NG/LP/Fuel Oil
Inlet Hose Diameter
2 x 24”
Weight
2,000 lbs.
Flue Connection
12”
Dimensions
152” x 47” x 74”
Duct Length
400 ft.
Efficiency
88%
Voltage
208 V / 3 phase
Static Pressure
3.6
Frequency Hz
60
100% clean and dry heat
Outlet temperature circa 104-158°F
Large heat throw
• High efficiency heat exchanger (92%).
• Weather resistant & lockable casing.
• High pressure fan for powerful heat
distribution.
• Recirculation hose flange possible.
• Combustion chamber heat resistant up to 850°C.
• Lower tray for oil containment during servicing.
Rental 19
Temperature Control
SPECIFICATIONS
Make-up Air Heater
Temperature Control
600,000 BTU Make-up Air Heater
Applications:
• Job Site/Construction Heat
• General/Building Heat
• Temporary Shelter
• Industrial Heat
• Commercial/Institutional Heating
SPECIFICATIONS
Model .........................................................................................MUA600
Dimensions
Length.......................................................................................60.5”
Width......................................................................................29.25”
Height ......................................................................................... 48”
Shipping Weight ............................................................................ 500 lbs.
Duct Connection ..............................................................20” Outlet Flange
Power Supply ........................................................115 volt/1 phase/60 HZ
TECHNICAL DATA
Electrical Data
1.5 HP
12 FLA
20 amps
Fuel
Type
Consumption rate
Burner type
Inlet pressure
Maximum manifold pressure
Minimum gas supply
Natural Gas/Propane
100,000 BTU/hr (min) / 600,000 BTU/hr (max)
Modulating
Inlet pressure (min/max): 5 in. wc (min) / 2 psi (max)
5 in wc
7 in wc for maximum input adjustment
Blower
Speed
Drive mechanism
Duct outlet
3500 CFM
Belt Drive
20” diameter outlet flange
Heat
Thermostat
Maximum temperature rise
Maximum discharge temperature
Remote/Stationary
240° F
220° F
General
Body
Mobility
Portability
Stainless steel construction
8” lockable castors
Fork lift pockets/Lifting eye
Rental 20
Direct Fired Heaters
Temperature Control
400,000 to 3.5 Million BTU
Direct Fired Heaters
Applications:
• Job Site/Construction Heat
• General/Building Heat
• Temporary Shelter
• Industrial Heat
• Commercial/Institutional Heating
Temperature Control
PRODUCT FEATURES
Body Construction ............................................................Stainless Steel
Burner ...............................................................................Stainless Steel
Consumption Rating .........................................................High Efficiency
Fuel Type ..............................................................Natural Gas/LPG Fired
Sizes ............................................................... 400,000 to 3,500,000 BTU
TECHNICAL DATA
Output
Model
Manifold
Pressure
Max Gas
Consumption
CFM
Electrical
1/4 hp motor
120V, 3 amps
High
Low
400,000 BTU
N/A
2” W.C. LPG
7” W.C. NG
4 Gallons/hr
400 CFH
2800
700K
High
Low
700,000 BTU
N/A
2” W.C. LPG
7” W.C. NG
7.5 Gallons/hr
700 CFH
4500
2.0M
High
Low
2.000,000 BTU
800,000
2” W.C. LPG
7” W.C. NG
20 Gallons/hr
2000 CFH
3.5M
High
Low
3,500,000 BTU
1,000,000 BTU
9” W.C. LPG
14” W.C. NG
35 Gallons/hr
3500 CFH
400K
Weight
Dimensions
90 lbs
16”W x 24”H x 52”L
1 hp motor
120V, 8 amps
178 lbs
22”W x 31”H x 58”L
8000
1.5 hp, 120 V, 14 amps
230 V, 480 V available
355 lbs
30”W x 36”H x 63”L
21000
5 hp, 480 V, 8 amps
5 hp, 230 V, 21 amps
540 lbs
62”W x 52”H x 180”L
Rental 21
15 - 30kW Heaters/Maxi Heater
Temperature Control
15 kW - 30 kW Electric Heaters
A high-output heating element combined with a powerful fan
results in superior heat coverage for your indoor applications.
Heaters are intended for confined work environments with
ceiling heights of less than 15’.
SPECIFICATIONS
Size
15 kW
Volts
30 kW
480 VAC
208 VAC/480 VAC
Watts
15,000
30,000
BTU/Hr
51,195
102,390
cfm
800
800
amps
42/18
36
Ht. x Ws. x Dp.
39” x 27” x 22.5”
39” x 27” x 21”
Maxi Heater - MH1000
Indirect combustion ensures only clean, breathable air is
entering the work area. The 191 gallon fuel tank provides
up to 30 hours of continuous operation without refueling.
Twin heaters produce a maximum of 1,000,000 BTUS may be
operated independently depending on heating requirements.
SPECIFICATIONS
Length
Width
Height
Weight
(with Fuel)
16 ft.
6’ 8”
6’
4,651 lbs.
Rental 22
Desiccant Dehumidifiers
Temperature Control
Desiccant Dehumidifiers
Applications:
• Mold/Fungus Prevention
• Surface Preparation and Coating
• Restoration Drying
• Corrosion Prevention
• Electronics Protection
• Power Plant Lay-Up
• Pharmaceutical
• Candy manufacturing
Temperature Control
PRODUCT FEATURES
• Main Power Phase Monitors
• 30% Inlet Air Filters
• Round Duct Collars
• 12 inches External Static Pressure
• Non-rusting Aluminum Construction
• Lightweight/Small Footprint
• Simple, Reliable Operation
TECHNICAL DATA
Dehumidifier
Model
Process Air Flow
Reactivation Heat Source
Total Static Available
OCD-1000
1000 CFM
13.5kW Electric
2 inch WC
OCD-2500
2500 CFM
50kW Electric
5 inch WC
OCD-5000
5000 CFM
99kW Electric
12 inch WC
Dimensions
Length
Width
Height
Weight
70”
32”
38”
525 lbs
8’
6.5’
6’
2,600 lbs
12’ 11.5”
6’6”
6’
3,200 lbs
Electric
Volts
Phases
Hz
FLA
240
1
60
74 FLA
480
3
60
90 FLA
480
3
60
140 (175 amp breaker)
Included Options
Transportation
Dual Reactivation
Connection Type
Outlet Size
Castors and fork pockets
Electric
Cord
10”
Fork pockets
LP gas and electric
Cam-lock
19.75”
Fork pockets
LP gas and electric
Cam-lock
19.75”
Rental 23
Accessories
Temperature Control
Electric HVAC Pumps
Used with cooling towers and /or chillers capable of
pumping water or glycol.
SPECIFICATIONS
Size
GPM
Voltage
5 HP
100
460/60/3
10 HP
250
460/60/3
15 HP
250
460/60/3
25 HP
500
460/60/3
50 HP
1250
460/60/3
100 HP
2500
460/60/3
Chiller Hose
Temporary quick connect chilled water hose available with unit
for tie in to chilled water system.
SPECIFICATIONS
Size
GPM
Length
Connection Type
4 in
Suction & Discharge
10 - 20 ft
Cam-lock/Victaulic
6 in
Suction & Discharge
10 - 50 ft
Victaulic
8 in
Suction & Discharge
10 - 50 ft
Victaulic
10 in
Suction & Discharge
10 - 50 ft
Victaulic
Rental 24
Accessories
Temperature Control
Air Box
NMC CAT’s air box is designed to be ducted into a space
or attached directly to the wall of a tent. Aluminum
construction with white powder coat finish.
3 - 20” Round Duct Connections
Dimensions: 66” w x 36” d x 26” h
Flexible Duct
PVC vinyl coated polyester fabric hose reinforced
with a spring steel wire helix & external wearstrip.
All hose ends have a belted cuffed end for simple
installation. Available in 14” or 20” diameter;
standard length 25’.
Rental 25
Temperature Control
The air box is used to easily transition from round 20”
supply or return duct outside of the tent to a register
inside of the tent.
Air Compressors
Compressed Air
Compressed Air
NMC CAT’s knowledge of compressed air allows us
to provide our customers with specific cfm, psig or
dew point requirements for any application. Portable
compressor packages provide reliable, clean, dry air.
All compressor units deliver low-cost air at any flow
and pressure for the ultimate in flexibility, whether you
need Oil-Free, Instrument Quality or Oil Flooded units.
SPECIFICATIONS:
Model
Air
Output
Rated
Pressure
Fuel Tank
Capacity (gal)
Working
Weight (lbs)
Length
Width
Height
Fuel
Consumption (GPH)
185HAF
185 cfm
100 psig
20
2,130
10’9”
4’9”
4’ 4”
3.07
375HAF
375 cfm
150 psig
56
4,420
13’
6’ 4”
6’ 1”
6.45
750HAF
750 cfm
150 psig
120
10,600
15’ 9”
7’ 2”
6’ 9”
11.6
900HAF
900 cfm
150 psig
120
10,600
15’ 9”
7’ 2”
6’ 9”
12.7
900XHH
900 cfm
1150 cfm
500 psig
350 psig
245
16,040
20’
7’ 3”
7’ 6”
24.8
1600HAF
1600 cfm
150 psig
190
16,620
20’
7’ 3”
7’ 7”
24.8
Applications:
• Air-Powered Controls, Valves, Dampers & Cylinders
• General Purpose Construction Air
• General Purpose Plant Air
• Mining and Drilling Applications
• Critical Process Air (Oil Free)
• Painting and Sandblasting
• Pneumatic Material Transfer
Rental 26
Air Compressors / Hoses
Compressed Air
100% Oil Free Air
The 1550 cfm units provide 100% oil free air, with
no danger of system problems or damage to work in
process. Built with fewer components, their simplified
design offers premium performance and minimal
maintenance.
SPECIFICATIONS:
1550 Oil Free
Air
Output
1550 cfm
Rated
Pressure
Fuel Tank
Capacity (gal)
75 - 135
psig
250
Working
Weight (lbs)
25,000
Length
Width
Height
Fuel
Consumption (GPH)
19’
7’ 3”
8’ 1”
21.5 gph
Compressed Air Hoses
Air hose is specifically designed to send compressed air to
valves, components and tools. NMC CAT offers 2” and 3”
Boss fittings with safety whipchecks.
SPECIFICATIONS
Size
Type
Length
3 in
150 psi
25 - 50 ft
4 in
150 psi
25 - 50 ft
* High Pressure Available
Rental 27
Compressed Air
Model
Skid Steer Loaders
CAT Rental Store
Skid Steer Loaders
• Sealed and pressurized cab on the C-Series for a
cleaner, quieter work environment.
• Adjustable seat-mounted controls and an available
air ride seat on the C-Series keep you comfortable
throughout the work day.
• Wide range of operating ranges and skid steer
attachments.
• High horsepower and strong performance help you get
more done.
• Ride control option on the C-Series for an even
smoother ride and better material retention.
SPECIFICATIONS
Net Power
Model
hp
kW
Rated Operating Capacity
lb
kg
216B Series 2
47
35
1,400
226B Series 2
56
42
232B Series 2
56
236B Series 2
Operating Weight
lb
kg
635
5,609
2581
1,500
680
5,822
2641
42
1,900
861
6,737
3056
71
53
1,950
884
7,007
3178
242B Series 2
56
42
2,100
952
6,914
3136
246C
73
54
2,150
975
7,480
3393
252B Series 2
71
53
2,500
1134
7,861
3565
256C
82
61
2,350
1066
7,665
3477
262C
82
61
2,700
1225
7,968
3614
272C
90
67
3,250
1474
8,362
3793
Available Work Tools & Attachments:
Hydraulic Hammer, Auger, Brush Cutter, Buckets, Tracks, Forks,
Brooms, Rockhound, Cold Planer, Trencher, Harley Rake, Grapple,
Snow Blower, Snow Blade, Mulchers
High Flow models available
Rental 28
Multi Terrain Loaders
CAT Rental Store
Multi Terrain Loaders
• Unique rubber track undercarriage delivers low ground
pressure so you can work on sensitive surfaces and in soft
underfoot conditions.
• Spacious, sealed and pressurized cab on the C-Series
models provides a comfortable work environment.
• Adjustable seat-mounted controls and an available air ride
seat on the C-Series keep you comfortable throughout the
work day.
• Wide range of operating capacities and attachments, high
horsepower and strong performance help you get more
done and increase your bottom line.
SPECIFICATIONS
Net Power
hp
kW
247B Series 2
56
42
6,997
257B Series 2
56
42
277C
82
287C
297C
Operating Weight
lb
kg
Operating Capacity*
lb
kg
Ground Pressure
psi
kPa
3174
2,050
929
4.0
27.3
7,952
3607
2,500
1134
4.5
31
61
9,495
4307
3,200
1451
3.7
25.5
82
61
9,958
4517
3,800
1724
3.9
26.9
90
67
10,139
4599
4,200
1905
4.0
27.7
*At 50% tipping load
Available Work Tools & Attachments:
Hydraulic Hammer, Auger, Brush Cutter, Buckets, Tracks,
Forks, Brooms, Rockhound, Cold Planer, Trencher, Harley
Rake, Grapple, Snow Blower, Snow Blade, Mulchers
High Flow models available
Rental 29
CAT Rental Store
Model
Mini Hydraulic Excavators
CAT Rental Store
Mini Hydraulic Excavators
• High digging forces and fast cycle times to help you get
more done, faster.
• Quiet, spacious cab and smooth ergonomic controls, with
integrated auxiliary and swing boom functions keep you
comfortable and reduce operator fatigue.
• Pin-Grabber Coupler and quick disconnects enables the
operator to change mini excavator attachments quickly.
• Auto idle, auto two-speed and a load sensing variable
pump optimize fuel efficiency.
• A compact or standard radius tail swing with a swing or
fixed boom option provides a good match to any jobsite.
SPECIFICATIONS
Net Power
Model
hp
Max Reach/Depth
Operating Weight
kW
lb
kg
ft-in
m
301.6C
18.1
13.5
3,792
1720
12’9” / 7’7”
3.9 / 2.3
301.8C
18.1
13.5
3,935
1785
12’9” / 7’7”
3.9 / 2.3
302.5C
24.9
18.6
6,283
2850
16’2” / 9’7”
4.9 / 2.9
303C CR
29.5
22
7,837
3555
17’11” / 10’6”
5.5 / 3.2
303.5C CR
38.9
29
8,620
3910
18’5” / 11’4”
5.6 / 3.5
304C CR
41.6
31
10,847
4920
19’8” / 12’1”
6.0 / 3.7
305C CR
46.9
35
11,729
5320
20’4” / 12’9”
6.2 / 3.9
307D
55.6
41.5
15,598
7075
22’3” / 15’1”
6.8 / 4.6
308D CR SB
55.6
41.5
18,519
8400
25’0” / 15’6”
7.6 / 4.7
Available Work Tools & Attachments:
Hydraulic Hammers, Plate Compactors, Grapple, Mechanical
Thumb and a variety of bucket sizes.
Rental 30
Hydraulic and Wheel Excavators
CAT Rental Store
Hydraulic & Wheel Excavators
• Cat ACERT™ technology works at the point of combustion
to optimize engine performance and provide low exhaust
emissions.
• The optimized hydraulic system has been designed to provide
reliability and outstanding controllability.
• The D-Series excavator operator station provides maximum
space, wider visibility, and easy access to switches. All of this
ensures the most comfortable working environment for the
operator.
• Many boom and stick options are available, offering a
large range of configurations suitable for a wide variety of
applications.
SPECIFICATIONS
hp
312D L
90
314D LCR
Max Reach/Depth
Operating Weight
kW
lb
kg
67
29,650
13 450
28’3” / 19’10”
8.6 / 6.0
90
67
31,750
14 400
28’4” / 19’6”
8.6 / 5.9
315D L
115
86
38,100
17 280
30’3” / 21’7”
9.2 / 6.6
320D L
148
110
44,820
20 330
35’2” / 25’1”
10.7 / 7.6
321D LCR
148
110
53,308
24 180
32’1” / 22’0”
9.79 / 6.71
324D L
188
140
54,660
24 790
34’7” / 24’1”
10.55 / 7.33
329D L
204
152
64,460
29 240
36’7” / 25’8”
11.15 / 7.83
328D LCR
204
152
76,500
34 700
34’8” / 22’8”
10.56 / 6.92
336D L
268
200
79,700
36 151
38’5” / 26’10”
11.71 / 8.19
345D L
380
283
100,040
45 375
42’4” / 28’9”
12.91 / 8.77
365C L
404
302
145,430
65 960
46’1” / 31’0”
14.04 / 9.64
M318D** Wheel
166
124
44,313
20 100
32’1” / 20’11”
9.76 / 6.36
* Maximum digging depth with longest boom/stick options.
** Material Handler versions of the M318D are available.
Available Work Tools & Attachments:
Hydraulic Hammers, Plate Compactors, Grapple, Mechanical
Thumb, Compaction Wheels and a variety of bucket sizes.
Rental 31
ft-in
m
CAT Rental Store
Net Power
Model
Track-Type Tractors
CAT Rental Store
Track-Type Tractors
• Fully suspended steel undercarriage delivers the
smoothest ride and better material retention.
• Larger, quieter cab and intuitive seat-mounted
controls to keep you comfortable throughout the work
day.
• Low effort controls to reduce operator fatigue.
• Cat-exclusive SystemOne™ undercarriage for longer
life and greatly reduced maintenance time and costs.
• Integrated Cat AccuGrade™ grade control solution for
fast, precise grading.
• Higher horsepower and improved fuel efficiency to get
more done with less fuel.
SPECIFICATIONS
Operating Weight
Power
Model
hp
Blade
kW
lb
kg
D3K XL*
74
55.2
17,185
7795
VPAT
D3K LGP*
74
55.2
17,842
8093
VPAT
D4K XL*
84
62.6
17,961
8147
VPAT
D4K LGP*
84
62.6
18,742
8501
VPAT
D5K XL*
96
71.6
20,741
9408
VPAT
D5K LGP*
96
71.6
21,347
9683
VPAT
D6K XL
125
93.2
28,409
12 886
VPAT
D6K LGP
125
93.2
29,690
13 467
VPAT
D6N XL**
150
111.8
36,497
16 555
VPAT, SU
D6N LGP**
150
111.8
39,112
17 741
VPAT
D6T XL
200
149
44,420
20 148
SU
D6T LGP
200
149
48,024
21 783
LGP - VPAT
D7R 2 (STD, LGP or XR)
240
179
60,503
27 443
S, SU, U, A
D8T*
310
231
84,850
38 488
SU, U, A
* Available with MS ripper, SS ripper, counterweight.
** Available with MS ripper.
Winch available for D3K to D9T.
Rental 32
Track Loaders
CAT Rental Store
Track Loaders
• Hydrostatic drives with electronic control offer quick,
smooth operation and superior maneuverability.
• Electro hydraulic controls together with adjustable
magnetic lift kickout and bucket positioners, help reduce
operator fatigue.
• The Cat Computerized Monitoring System (CMS) is
the interface between operators and the Electronic
Hydrostatic Control (EHC) of transmissions.
• Cat oscillating undercarriages improve traction,
machine stability and reduced frame impact.
SPECIFICATIONS
Power
Bucket Capacity
Operating Weight
kg
hp
kW
lb
953D
148
110
34,209
15 517
2.42
963D
189
141
44,577
20 220
3.2
m3
yd3
1.85
2.45
*Includes GP bucket plus long bolt-on teeth and segments.
Compact Track Loaders
• Fully suspended steel undercarriage delivers the smoothest ride and
better material retention.
• Standard two-speed lets you move material more efficiently around the
jobsite.
• Spacious, sealed and pressurized cab provides a comfortable work
environment.
• Adjustable seat-mounted controls and available air ride seat for comfort
throughout the work day.
SPECIFICATIONS
Operating Capacity*
lb
kg
Ground Pressure
psi
kPa
Model
Net Power
hp
kW
Operating Weight
lb
kg
279C
82
61
9,892
4487
3,200
1451
4.0
27.2
289C
82
61
10,365
4702
3,850
1746
4.1
28.5
299C
90
67
10,730
4867
4,150
1882
4.3
29.6
*At 50% tipping load
Available Work Tools & Attachments:
Hydraulic Hammer, Auger, Brush Cutter, Buckets, Tracks,
Forks, Brooms, Rockhound, Cold Planer, Trencher, Harley
Rake, Grapple, Snow Blower, Snow Blade, Mulchers
Rental 33
CAT Rental Store
Model
Wheel Loaders
CAT Rental Store
Wheel Loaders
• Electro-hydraulic implement controls and load-sensing hydraulic
system with simultaneous lift and tilt capabilities offer better
control with less effort.
• Repeatable fine modulation gives superior bucket control with less
spillage.
• New and proven systems work together for better fuel efficiency
without sacrificing power and performance.
• Ergonomically designed cab offers best-in-class work environment.
• Serviceability features focus on ease of service for daily checks,
extended service intervals and reducing owning and operating
cost.
• Cat reliability, simplified serviceability, superior dealer support and
parts availability keep you running with less downtime and lower
operating costs.
SPECIFICATIONS
Net Power
Model
Bucket Range
Operating Weight
hp
kW
lb
kg
yd3
924H
128
96
25,664
11 632
2.2 - 3.6
1.7 - 2.8
930H
149
111
28,725
13 029
2.6 - 6.5
2.1 - 5.0
938H
180
134
33,190
15 059
3.0 - 4.0
2.3 - 3.0
950H
197
147
40,435
18 338
3.25 - 4.5
2.5 - 3.5
966H
262
195
52,254
23 698
4.5 - 5.5
3.4 - 4.2
980H
349
260
67,294
30 519
5.0 - 8.0
3.8 - 6.1
988H
501
373
109,230
49 546
8.2 - 9.2
6.3 - 7.0
Available Work Tools & Attachments:
Variety of forks, brooms, and buckets.
Rental 34
m3
Compact Wheel Loaders / IT
CAT Rental Store
Compact Wheel Loaders/
Integrated Toolcarriers
SPECIFICATIONS
Net Power
Model
Bucket Range
Operating Weight
hp
kW
lb
kg
yd3
m3
904H
52
39
9,900
4490
0.78
0.6
906H
70
52
12,412
5630
1.18
0.9
908H
80
59
14,252
6465
1.40
1.1
914G
96
72
17,527
7950
1.57 - 1.83
1.2 - 1.4
IT14G
96
72
18,629
8450
1.57 - 1.83
1.2 - 1.4
Available Work Tools & Attachments:
Variety of forks, brooms, and buckets.
Rental 35
CAT Rental Store
• Strong breakout forces, fast cycle times and aggressive
performance packaged in one compact machine.
• Superior reach, excellent visibility and low effort joystick control
let you place material easily and efficiently.
• Spacious cabs with joystick controls keep you comfortable
throughout the work day.
• Ride Control option provides an even more comfortable ride and
greater material retention over rough terrain.
• Skid Steer Loader style coupler on the 904H, 906H and 908H
allows the use of Cat Skid Steer Loader attachments for
increased versatility.
• Tackle more jobs with one machine with the extensive line of Cat
Work Tools available for the Compact Wheel Loader.
Backhoe Loaders
CAT Rental Store
Backhoe Loaders
• Spacious cab features ergonomic joystick controls with
thumb-operated auxiliaries.
• Integrated Toolcarrier option for greater versatility with quick
change forks, buckets, blades and brooms.
• Powerful hydraulic system for fine precision with high
productivity.
• Travel speed of 25 mph (40 kph) to get between sites faster.
• Wide range of backhoe attachments including augers,
hammers, compactors, and a factory-installed thumb.
• AccuGrade Site Reference System for in-cab grade and depth
check.
• Ride control option for better material retention and a
smoother ride.
SPECIFICATIONS
Net Power
Dig Depth
Operating Weight
Model
hp
kW
lb
kg
ft-in
mm
416E
88
65
14,960
6792
14’4”
4360
420E/420E IT
93
69
15,201
6895
14’4”
4360
430E/430E IT
102
76
16,066
7294
15’5”
4698
Available Work Tools & Attachments:
Demolition Hammers, plate compactors, brooms,
buckets and forks.
Rental 36
Telehandlers / Industrial Forklifts
CAT Rental Store
Telehandlers
• The operator station provides comfort and protection
with excellent job site visibility and convenient, logical
controls.
• Intuitive Control Layout — All day operator comfort and
efficiency is ensured through our simple, logical control
layout.
• Easy access cab entry and exit is both easy and
convenient due to the well placed handholds and step.
• Operator Protection — The machine provides full
operator security with OROPS or EROPS protection.
• Excellent Visibility — The TL-Series cab has superb
visibility due to the use of advanced virtual design
techniques.
Rated Capacity
Net Power
Lift Height
Model
hp
kW
lb
kg
ft-in
m
TH255
84
63
5,500
2500
18’4”
5.6
TL642
99
74.5
6,500
2948
42’0”
12.8
TL943
99
74.5
9,000
4082
43’0”
13.1
TL1055
125
93.2
10,000
4536
55’0”
16.8
TL1255
142
106
12,000
5443
55’0”
16.8
Available Work Tools & Attachments:
Variety of forks, brooms and buckets.
Industrial Forklifts
• Side shift
• Full-suspension seat and tilt steering
SPECIFICATIONS
Model
Fuel Type
Rated Capacity (lb)
P6000
Gas / LP
6,000
Engine Displacement (liters)
Gasoline/Diesel
2.5 / 3.3
Rental 37
CAT Rental Store
SPECIFICATIONS
Soil Compactors
CAT Rental Store
Soil Compactors
• Power Train: Delivers top performance and durability in tough
applications.
• Hydraulics: Well-balanced hydraulics deliver precise, low-effort
control and trouble-free operation.
• Structures: Advanced design and materials provide superior
strength to the purpose built structures.
SPECIFICATIONS
Gross Power
Blade Width Over End Bits
Operating Weight
Model
hp
kW
lb
kg
ft-in
mm
815F2
232
173
47,877
21 713
12’4”
3761
825H
354
264
72,164
32 734
15’1”
4628
Vibratory Soil Compactors
• Vibratory System: The pod-style vibratory system delivers
superior compactive force while offering serviceability advantages.
• Cat C4.4 Engine with ACERT Technology: High-tech four
cylinder engine provides outstanding durability, performance,
reliability and operating economy while producing less emissions.
• Proprietary Eccentric Weights: Reliable dual amplitude
selection and innovative design ensure precise performance.
SPECIFICATIONS
Gross Power
Drum Width
Operating Weight
Model
hp
kW
lb
kg
in
mm
CS323C
83
62
9,680
4390
50
1270
CP323C
83
62
10,190
4620
50
1270
CS433E
100
75
14,875
6745
66
1676
CP433E
100
75
15,750
7145
66
1676
CS56
156
116
25,164
11 414
84
2134
CP56
156
116
25,047
11 316
84
2134
Rental 38
Asphalt Compactors
CAT Rental Store
Vibratory Asphalt Compactors
• Caterpillar C2.2 Engine: The C2.2 engine provides efficient
power while meeting U.S. EPA Tier 4a engine emission
requirements.
• Operator’s Station: The convenient, comfortable operating
environment with three-position seating provides good visibility
and promotes day-long productivity.
• Vibratory System: The vibratory system provides good balance
between frequency and amplitude in order to meet various job
site conditions.
• Water Spray System: Corrosion-proof components provide
long life and reliable operation.
Gross Power
Operating Weight
kg
Model
hp
kW
CB14
21.6
16.1
3,571
CB24
33
24.6
CB34
46
34.1
lb
Drum Width
in
mm
1620
31
800
5,952
2700
47
1200
8,688
3940
51
1300
CB534D
130
97
22,836
10 380
67
1700
CB534D XW
130
97
24,860
11 300
79
2000
Rental 39
CAT Rental Store
SPECIFICATIONS
Rotary Mixers / Motor Graders
CAT Rental Store
Rotary Mixers
• C11 Engine with ACERT® Technology: A combination of
innovations working at the point of combustion, ACERT®
Technology optimizes engine performance while meeting
U.S. EPA Tier 3 and European EU Stage IIIa emission
regulations for off-road applications.
• Operator’s Station: Ergonomic design emphasizes
operator comfort, visibility and easy operation. The optional
sliding platform slides side-to-side to reduce operator
fatigue for increased productivity.
• Operational Controls: All machine controls, switches and
gauges are positioned to minimize operator fatigue and
maximize productivity.
SPECIFICATIONS
Gross Power
Operating Weight*
lb
kg
Model
hp
kW
RM300
350
261
53,911
RM500
540
403
62,060
Cutting Width Standard
Max Working Depth
in
mm
in
mm
24 454
96
2438
20
508
28 145
96
2438
20
508
* Weight with ROPS, cab and Universal rotor. RM300 and RM500 can be outfitted with optional rotors for various applications and conditions. RM300 and RM500 are
capable of both full depth reclamation (Max working depth 16”/406 mm) or soil stabilization depending on rotor configuration.
Motor Graders
• Cat motor graders continue their reputation for offering worldclass cab and controls, advanced electronics and hydraulics, and
optimum productivity... to match your needs in any application.
SPECIFICATIONS
Model
Net Power Standard
hp
kW
Net Power Optional
hp
kw
Operating Weight
lb
Standard Blade Length
kg
ft
mm
12M
158173
118129
158193
118144
32,016
14 522
12
3.7
140M
183198
136148
183218
136163
33,356
15 130
12
3.7
14M
259274
193204
259294
193219
47,133
21 379
14
4.3
Rental 40
Wheel Tractor-Scrapers / AT
CAT Rental Store
Wheel Tractor-Scrapers
• Cat Wheel Tractor-Scrapers have the power,
traction, and speed for reliable output in a variety
of applications. Scraper options include single- and
tandem-engine open bowls, tandem engine pushpulls, elevators and auger arrangements.
SPECIFICATIONS
Power
Capacity struck/heaped
yd3
m3
Top Speed Loaded
Model
hp
kW
613G
181
135
9/11
7/8
24
39
621G
330/365
246/272
16/22
12/17
32
51
627G
(T) 330/365
(S) 239/266
246/272
178/198
16/22
12/17
32
51
mph
km/h
• Standard dump or on-the-go ejector options – faster cycle
times and lower spreading costs.
• Advanced suspension systems and traction control –
delivering power to the ground in all conditions.
SPECIFICATIONS
Net Power
Operating Weight Empty
lb
kg
Model
hp
kW
725
301
225
49,075
730
317
237
730 Ejector
317
735
Body Capacity
tons
m/ton
22 260
26
23.6
50,375
22 850
31
28.1
237
56,330
25 550
31
28.1
419
313
69,206
31 391
36
32.7
740
453
338
72,973
33 100
43.5
39.5
740 Ejector
453
338
78,505
35 610
42
38
Rental 41
CAT Rental Store
Articulated Trucks
Water / Dump Trucks
CAT Rental Store
Water Trucks
• Can transport up to over 4,000 gallons of water
• Remote water cannon — 4,000 gallon
• Loaded weight 13,000 - 19,800 lb
• Manual 9 speed transmission
• Number of nozzles - 5
SPECIFICATIONS
Model
Tank Capacity
Loaded Weight
Power
LW 4000: M2 106
15141.6 L / 4000 gal
8999.3 kg / 19840 lb
223.7 kW / 300 hp
LW 2000: Ford F-750
7570.8 L / 2000 gal
6014.6 kg / 13260 lb
156.6 kW / 210 hp
LW 2000: GMC C6500
7570.8 L / 2000 gal
6196.1 kg / 13660 lb
154.4 kW / 207 hp
Dump Trucks
• Dump Capacity 6 yd3
• Power Source: Diesel
• Manual 6 Speed Transmission
SPECIFICATIONS
Model
Dump Capacity
Vehicle Weight
LW 5/6 TD: GMC 6500
4.6 m3 / 6 yd3
6114.4 kg / 13480 lb
154.4 kW / 207 hp
LW 5/6 TD: Ford F-750
4.6 m3 / 6 yd3
5933 kg / 13808 lb
156.6 kW / 210 hp
Rental 42
Power
Trailers / Brooms
CAT Rental Store
Trailers
• Adjustable hitch
• Circuit breaker
• Tie-down brackets
• I-Beam crossmembers
• Axles, tires, fender
• Protected electrical system
• Lightweight ramps
SPECIFICATIONS
12,000
Deck Width
Between Fenders
84”
Overall Width
Deck Length
102”
16’
Broce Brooms CR350
• Caterpillar Engine 4.4 Turbocharged, 82 HP @2200 RPM
• Full 8’ Brush
• Brush controls totally hydraulic
• 150 gal water system
• 2-door cab with heater and air-conditioning
• 7’6” angling scraper blade
Rental 43
Loaded
Deck Height
21.75”
Torflex Axis
2 - 6,000 lb
4 Bolt Pintle Hitch
Adjustable Range
19” - 25.75”
CAT Rental Store
Payload Capacity
Aerial Lifts: Scissor / Boom
CAT Rental Store
Scissor Lifts
• Large work area.
• Excellent strength and superior lifting capacity.
• Exceptional stability in indoor/outdoor.
• Slab applications requiring cleaner, quieter operation.
Description
30’ Vertical Personnel Lift
19’ Electric Scissor
20’ Electric Scissor
26’ Electric Scissor
32’ Electric Scissor
26’ Rough Terrain Scissor
32’ Rough Terrain Scissor
33’ Rough Terrain Scissor
Working Height
25’
25’
26’
32’
38’
32’
38’
39’
* Available with 4-wheel drive, Diesel, Dual Fuel
Boom Lifts
• Greater horizontal outreach than any other type of aerial
platform.
• Patented active oscillation system senses the terrain and
adjusts axle position.
• Positive traction maintains equal power to all drive
wheels.
• Continuous 360º rotation turntable for quick, flexible
positioning.
• Choice of engine styles and out-and-up articulating jib.
Description
30’ Electric Articulated Boom
34’ Electric Articulated Boom
45’ Articulated Boom
60’ Articulated Boom
80’ Articulated Boom
40’ Telescopic Boom
60’ Telescopic Boom
80’ Telescopic Boom
120’ Telescopic Boom
Working Height
36’
40’
51’
66’
86’
46’
66’
86’
126’
* Available with 4-Wheel Drive, Diesel, Dual Fuel
Rental 44
Air Compressors / Welders
CAT Rental Store
Air Compressors - 185 / 375 cfm
• Clam Shell Canopy
• Corrosion Resistant Enclosure
• Highway Towable Running Gear
• Curbside Instrument Panel
• SSAM – Shutdown System & Annunciation Module
• Capacity Control System
• Two-Stage Dry Type Air Filters
• Duel Fuel Filtration System
• Quiet Operation
* Available with Chipping and Jack Hammer
• Output Range: 400 amps
• Power Source: Diesel
• Fuel Capacity: 15 gal
• Generator Power: 3 - 17kW or 1 - 11kW
• Weight: 1,230 lb
SPECIFICATIONS
Model
Lincoln Electric - Vantage 400
Output Range
Power Source
400 amps / 400 amps
Diesel
Rental 45
Fuel Capacity
56.8 L / 15 gal
CAT Rental Store
Welders - Towable 400 amp
Light Towers / Trench Equipment
CAT Rental Store
Light Towers
• Compact design for easy access to confined areas.
• Centralized control panel for operator convenience.
• Durable outriggers ensure safe operation in extreme
conditions and heavy winds.
• Rugged trailer with highway tires for excellent stability and
mobility.
• Large fuel tank provides continuous lighting, all shift long.
• Four light configuration.
• Cold start package.
• Combo hitches.
SPECIFICATIONS
Power Source
Diesel
Tower Height
Lights
Tank Capacity
28 ft.
4
30 gal
Run Time
60 hours
Trench Shoring Equipment
• High tensile steel used throughout
• Stacking lugs, flush to inside
• 4-Point lifting system
• Thru-wall collar design
• Equal clearance collar alignment
• Hardwood inserts (top horizontal and end vertical tubes)
• Honey-comb inner structure
• High tensile cutting edge
Item:
Trench Boxes
Bedding Boxes
GME Manhole Boxes
GME Aluminum Boxes
Street Plates
Dimensions:
8’ x 16’, 20’, 24’
7, 9 and 12 yd3
8’, 10’
6’ x 8’, 8’ x 8’
various sizes
Rental 46
Wattage
4000
Trenchers / Rollers / Portable Saws
CAT Rental Store
Trenchers
Ride On Type
HP
RT450 Rubber Tired
46
RTX450 Rubber Tracked 41
Operating Weight
3,380 lb
4,050 lb
• Tight turning radius provides excellent maneuverability in
confined work areas.
• Four-wheel drive power for maneuvering.
• Grouped controls provide higher productivity because
operator is always oriented in the same position.
• Locking differentials provide traction while trenching and
reduce axle stress on pavement when disengaged.
• Rubber-mounted engine reduces vibration to the tractor and
operator.
• Boom adjusts from center to offset position.
CAT Rental Store
Trencher Rollers (pad foot)
• Dual joystick control box for easy steering.
• Patented below the axle exciter in each drum for
superior compaction.
• EMC (Engine Control Module) with diagnostic LEDs
monitors all the engine functions.
• Easy to open hood is extremely durable, rust-free and
virtually dent-free.
• Removable fuel and hydraulic tanks along with hydraulic
connectors located on one side of the unit provide for
easy accessibility and improved overall serviceability.
Portable Cut-Off Saws
• Long-life Lubrication L3 piston with a special graphite surface
coating to eliminate piston and cylinder overheating
• Air cleaning system allows dust to be shaken off the
preliminary filter through the machines own vibration. Larger
filtering surface increases life
• Increased cooling air supply
• Starter rope has been treated with silicone, providing added
protection against rope damages
Rental 47
Rammers / Vibratory Plates / Trowels CAT Rental Store
Rammers
• Three –stage air filtration system – dust-free engine.
• 4-cycle crankcase for increased durability and simplified
maintenance.
• Three-piece piston oil ring.
• Guide handle offers highly engineered, built-in shockmount
system to reduce HAV.
Vibratory Plates
• Tough, wear resistant, ductile iron baseplate.
• Lightweight, high strength aluminum components.
• Straight center mounted guide handle.
• Large capacity polyethylene water tank is located within the
front lift cage for protection.
• Angled holes on spray bar allow complete water coverage.
• High inertia clutch with adjustable shims.
• Rear lifting handles and front lift cage.
• Asphalt, reversible.
Walk-behind Trowels
• Dynamically balanced trowels.
• Gyro-tech™ system and gearbox brake stops handle
within 270º, protecting operator from runaway handle
situation.
• Optimum weight distribution reduces the lateral force
from the trowel for reduced operator fatigue.
• Trowel feature a 30-degree blade pitch for better
concrete burnishing.
Rental 48
Pumps
CAT Rental Store
Towable Water Pumps
• 2” - 8” pumps available.
• Upon Request offer 10” - 24” pumps
• Automatic priming completely with long suction lines
• Solids Handling
• For dewatering, sewage, sludges, slurries and well-point
dewatering
• Cast chromium steel impeller for longer life
CAT Rental Store
Submersible Pumps
• Lightweight, compact design
• Built-in thermal protection
• Top discharge design to fit into confined spaces
• Tandem mechanical seals
• Silicon Carbide on seal for dry running
• Upon request can go up to 10” pump
• Cast chromium hardened steel impeller
• Heavy-duty rubber coated adjustable wearparts
insulation on all power cable conductors are protected
by a water block system
Trash Pumps
• Patented volute insert easily shimmed or replaced in
field
• Compact design with high strength, lightweight
aluminum housing
• Hardened ductile iron impeller and volute
• Radial flow design produces high volume and head
• High quality carbon ceramic mechanical seal
• Large diameter fill and drain plugs
• Easy access housing
• Integrated lifting eye
• Gas or diesel engine options
Rental 49
7 NMC LOCATIONS TO BETTER SERVE YOU
OMAHA
NORFOLK:
LINCOLN:
COLUMBUS
NORTH PLATTE
SCOTTSBLUFF
10608 Sapp Brothers Drive
Omaha, NE 68138
Ph: 402-861-9090
Toll-free: 877-637-3687
622 23rd Street
Columbus, NE 68601
Ph: 402-564-9309
Toll-free: 866-367-9716
2514 S. 13th Street
Norfolk, NE 68701
Ph: 402-379-1699
Toll-free: 800-598-0188
3501 S. Jeffers Street
North Platte, NE 69101
Ph: 308-532-2515
Toll-free: 888-532-2515
© 2010 NMC CAT
All Rights Reserved
OC500/1010/10K/MCS
Printed in U.S.A.
Materials & specifications are subject to change without notice.
930 West O Street
Lincoln, NE 68528
Ph: 402-742-4448
Toll-free: 800-472-4302
2705 North 10th Street
Gering, NE 69341
Ph: 308-632-6163
Toll-free: 800-898-6238
DONIPHAN:
10501 South US Hwy 281
Doniphan, NE 68832
Ph: 402-845-6503
Toll Free: 800-280-0203