Product Catalogue

QUARRY MINING & CONSTRUCTION EQUIPMENT PTY LTD
PERCUSSIVE DRILLING CONSUMABLES
Expertise You Can Depend On
CONTACTS
QUARRY MINING - NEWCASTLE
9/14 YANGAN DRIVE,
BERESFIELD NSW 2322
CONTACT:
Kari Armitage
Managing Director
PHONE:
+61 (0)2 4966 5028
FAX:
+61 (0)2 4910 9022
EMAIL:
[email protected]
CONTACT:
Phill Breese
General Manager
PHONE:
+61 (0)4 2930 7182
FAX:
+61 (0)2 4910 9022
EMAIL:
[email protected]
QUARRY MINING - MACKAY
5/35 IRIDIUM DRIVE,
PAGET QLD 4740
CONTACT:
Kevin Royal
Queensland State Manager
PHONE:
+61 (0)7 4998 5295
FAX:
+61 (0)7 4805 6126
MOBILE:
+61 (0)4 0246 7743
EMAIL:
[email protected]
www.quarrymining.com
Copyright inherent in all materials or documents in this catalogue, without limitation, is owned wholly by Quarry Mining and Construction Equipment
Pty Ltd and may not, in any part, be reproduced. All rights are reserved. You many not copy, adapt, edit, change, transform, publish or reproduce
material contained in this catalogue in any way. We take seriously any infringement of our copyright or trademarks including our Angel Drill Bits and
Quarry Mining brand.
Expertise You Can Depend On
SMALL HOLE DRILLING
INTEGRAL DRILL STEELS
PART NUMBER
EFFECTIVE LENGTH (L)
DIAMETER (D)
IDS-22108HM-0600-29
600mm
29mm
IDS-22108HM-0600-34
600mm
34mm
IDS-22108HM-0600-41
600mm
41mm
IDS-22108HM-0800-29
800mm
29mm
IDS-22108HM-0800-34
800mm
34mm
IDS-22108HM-0800-40
800mm
40mm
IDS-22108HM-1200-29
1200mm
29mm
IDS-22108HM-1200-34
1200mm
34mm
IDS-22108HM-1200-40
1200mm
40mm
IDS-22108HM-1600-28
1600mm
28mm
IDS-22108HM-1600-33
1600mm
33mm
IDS-22108HM-1800-28
1800mm
28mm
IDS-22108HM-1800-33
1800mm
33mm
IDS-22108HM-1800-38
1800mm
38mm
IDS-22108HM-2100-33
2100mm
33mm
IDS-22108HM-2200-28
2200mm
28mm
IDS-22108HM-2400-28
2400mm
28mm
IDS-22108HM-2400-32
2400mm
32mm
IDS-22108HM-2400-38
2400mm
38mm
IDS-22108HM-3200-28
3200mm
28mm
IDS-22108HM-3200-31
3200mm
31mm
IDS-22108HM-3200-37
3200mm
37mm
IDS-22108HM-4000-30
4000mm
30mm
SMALL HOLE DRILLING
Shank 22 x 108mm
3
REAMING TOOLS
PILOT RODS - 6° TAPER
Shank 22 x 108mm
EFFECTIVE LENGTH (L)
PR-22H-0600
600mm
PR-22H-0900
900mm
PR-22H-1200
1200mm
PR-22H-1800
1800mm
PR-22H-2100
2100mm
REAMING TOOLS
PART NUMBER
PERCUSSIVE REAMING BITS - 6° TAPER
PART NUMBER
DIAMETER (D)
PRB-06D-64-H
64mm
PRB-06D-76-H
76mm
PRB-06D-89-H
89mm
4
TAPERED RODS AND BITS
12° TAPER DRILL RODS
Shank 22 x 108mm
EFFECTIVE LENGTH (L)
TDS-22H-12D-0600
600mm
TDS-22H-12D-0800
800mm
TDS-22H-12D-0900
900mm
TDS-22H-12D-1200
1200mm
TDS-22H-12D-1500
1500mm
TDS-22H-12D-1800
1800mm
TDS-22H-12D-2100
2100mm
TDS-22H-12D-2400
2400mm
TDS-22H-12D-3000
3000mm
TDS-22H-12D-3600
3600mm
TDS-22H-12D-4000
4000mm
TAPERED RODS AND BITS
PART NUMBER
12° TAPER SPHERICAL BUTTON DRILL BITS
PART NUMBER
DIAMETER (D)
BB-12D-28-H
28mm
BB-12D-32-H
32mm
BB-12D-35-H
35mm
BB-12D-38-H
38mm
BB-12D-45-H
45mm
5
12° TAPER BALLISTIC BUTTON DRILL BITS
DIAMETER (D)
BB-12D-28-B
28mm
BB-12D-32-B
32mm
BB-12D-35-B
35mm
BB-12D-38-B
38mm
BB-12D-45-B
45mm
TAPERED RODS AND BITS
PART NUMBER
6
SPLIT SET DOLLIES
AIRLEG DOLLIES
PART NUMBER
SPLIT SET SIZE
SD-33-300-22R
33mm
SD-39-300-22R
39mm
SD-47-300-22R
47mm
SPLIT SET DOLLIES
FEMALE THREADED DOLLIES
PART NUMBER
INTERNAL THREAD
SPLIT SET SIZE
SD-22HF-33
22 Hex
33mm
SD-R25F-33
R25
33mm
SD-R32F-33
R32
33mm
SD-R32F-39
R32
39mm
SD-R32F-46
R32
46mm
SD-R38F-33
R38
33mm
SD-R38F-39
R38
39mm
SD-R38F-46
R38
46mm
SD-T38F-33
T38
33mm
SD-T38F-39
T38
39mm
SD-T38F-46
T38
46mm
7
R25 EXTENSION DRILLING
R25 SHANK RODS
Shank 22 x 108mm
EFFECTIVE LENGTH (L)
SR-22H-R25M-0300
300mm
SR-22H-R25M-0400
400mm
SR-22H-R25M-0600
600mm
SR-22H-R25M-0900
900mm
SR-22H-R25M-1200
1200mm
SR-22H-R25M-1500
1500mm
SR-22H-R25M-1800
1800mm
SR-22H-R25M-2100
2100mm
SR-22H-R25M-2400
2400mm
SR-22H-R25M-3100
3100mm
SR-22H-R25M-3600
3600mm
R25 EXTENSION DRILLING
PART NUMBER
R25 MALE / FEMALE EXTENSION RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MF-R25-0600
600mm
MF-R25-0900
900mm
MF-R25-1200
1200mm
MF-R25-1800
1800mm
8
R25 SPHERICAL BUTTON DRILL BITS
DIMENSION (D)
BB-R25-33-H
33mm
BB-R25-35-H
35mm
BB-R25-38-H
38mm
BB-R25-41-H
41mm
BB-R25-43-H
43mm
BB-R25-45-H
45mm
BB-R25-48-H
48mm
BB-R25-51-H
51mm
BB-R25-57-H
57mm
R25 EXTENSION DRILLING
PART NUMBER
R25 BALLISTIC BUTTON DRILL BITS
PART NUMBER
DIMENSION (D)
BB-R25-33-B
33mm
BB-R25-35-B
35mm
BB-R25-38-B
38mm
BB-R25-41-B
41mm
BB-R25-43-B
43mm
BB-R25-45-B
45mm
BB-R25-48-B
48mm
BB-R25-51-B
51mm
BB-R25-57-B
57mm
9
R25 CROSS DRILL BITS
PART NUMBER
DIMENSION (D)
XB-R25-41
41mm
XB-R25-45
45mm
XB-R25-51
51mm
XB-R25-57
57mm
R25 EXTENSION DRILLING
10
HAND HELD PNEUMATIC EQUIPMENT - PERCUSSIVE
Sales - Hire - Service
BOAR SERIES ROCK DRILLS
The “BOAR” has a lightweight piston with large diameter, powerful rotation mechanism and
flushing, assuring successful drilling output, even when drilling in poor rock and with low air
pressure operation.
Model
Boar
Boar Max
Boar Max Plus
Part Number
DU-9-307-01-L
DU-9-307-05-L
DU-9-307-10-L
Boar
90 mm
90 mm
90 mm
Stroke
45 mm
60 mm
60 mm
Impact Rate
3100 min-1
2750 min-1
2650 min-1
Free Speed
320 RPM
300 RPM
265 RPM
Air Consumption
4.5 m3/min @ 6 bar
4.5 m3/min @ 6 bar
4.5 m3/min @ 6 bar
Operating Air Pressure
4-7 bar
4-7 bar
4-7 bar
Air Connection
1” BSP
1” BSP
1” BSP
Water Connection
1/2” Hose
1/2” Hose
1/2” Hose
Rock Drill Shank
22 x108 mm Hex
22 x108 mm Hex
22 x108 mm Hex
Net Weight
30.5 kg
31 kg
31 kg
Length
685 mm
700 mm
700 mm
HAND HELD PNEUMATIC EQUIPMENT
BOAR SERIES ROCK DRILLS - TECHNICAL SPECIFICATIONS
Refer to page 3 and 8 for compatible drill steels
All models are available with sinker anti-vibration handle. When fitted, measured vibration* is
reduced from 23 ms-2 to 7.5 ms-2
*Vibration levels were recorded @ 6 bar pressure
A Full Range of Spare Parts is available for all equipment
11
Sales - Hire - Service
DT SERIES AIRLEGS - TWO STAGE
PART NUMBER
RETRACTED
LENGTH (A)
STROKE (B)
EXTENDED
LENGTH (C)
PISTON DIAMETER
DU-64-979-014-DM
1305mm
1440mm
2745mm
78/65mm
Other sizes may be available on request. Please enquire for lead times.
Features:
Durable construction
!
Independent controls – airleg mounted
!
Double telescopic design
!
Push button retraction – airleg mounted
!
Minimum repositioning during drilling
HAND HELD PNEUMATIC EQUIPMENT
!
The double telescopic design characteristic incorporating independent control
and push-button retraction gives added flexibility and manoeuvrability in all
conditions, minimising repositioning of the airleg during hole drilling.
The double telescopic extension allows for long haul drilling in one pass.
A Full Range of Spare Parts is available for all equipment
12
Sales - Hire - Service
BOAR SERIES DOUBLE TELESCOPIC STOPERS
MODELS NUMBER
COLLAPSED
LENGTH
EXTENDED LENGTH
STROKE
ROTATION
DU-9-307-07-ST-150L – Double Telescopic
1520 mm (60")
3070 mm (121")
1550 mm (61")
Left
DU-9-307-07-ST-150R – Double Telescopic
1520 mm (60")
3070 mm (121")
1550 mm (61")
Right
Other sizes may be available on request. Please enquire for lead times.
Refer to page 3 and 8 for compatible drill steels
HAND HELD PNEUMATIC EQUIPMENT
Features:
•
Unbeatable combination of both the Boar Series
Rockdrill and DT Series Jackleg technologies
•
Double telescopic design
•
Adjustable drilling speed and feed pressure controls
•
Very robust and extremely reliable
•
High level of part interchangeability with standard
rockdrills and airlegs
13
ERGONOMIC LIGHT WEIGHT ROCK DRILLS
PART NUMBER
SHANK
WEIGHT
AM-PL5 / CP9
CP9
5.5 kg
HAND HELD PNEUMATIC EQUIPMENT
A Full Range of Spare Parts is available for all equipment
CP9 INTEGRAL DRILL STEELS
PART NUMBER
OVERALL LENGTH (L)
DIAMETER (D)
CP9-0200-16
200mm
16mm
CP9-0200-19
200mm
19mm
CP9-0200-22
200mm
22mm
CP9-0200-28
200mm
28mm
CP9-0330-25
330mm
25mm
CP9-0330-32
330mm
32mm
CP9-0330-35
330mm
35mm
CP9-0330-13
330mm
13mm
CP9-0330-16
330mm
16mm
CP9-0330-19
330mm
19mm
CP9-0330-28
330mm
28mm
CP9-0430-19
430mm
19mm
CP9-0430-22
430mm
22mm
CP9-0430-25
430mm
25mm
CP9-0430-32
430mm
32mm
CP9-0430-35
430mm
35mm
CP9-0450-14
450mm
14mm
CP9-0450-19
450mm
19mm
CP9-0450-24
450mm
24mm
CP9-0450-32
450mm
32mm
CP9-0450-35
450mm
35mm
CP9-0590-32
590mm
32mm
14
CP9 DRILL STEELS - MOIL, CHISEL AND SPADE
PART NUMBER
OVERALL LENGTH (L)
END TYPE
CP9-MP-250
250mm
Moil
CP9-CH-250
250mm
Chisel
CP9-CH-350
350mm
Chisel
CP9-SP-60
250mm
Spade
HAND HELD PNEUMATIC EQUIPMENT
15
ERGONOMIC LIGHT WEIGHT HAMMERS
PART NUMBER
HAMMER TYPE
SHANK
WEIGHT
AM-SP55
Pick Hammer
19mm hex
6.2 kg
AM-SP66
Pick Hammer
19mm hex
7.0 kg
AM-PS90
Breaker Hammer
22x108mm hex
9.6 kg
HAND HELD PNEUMATIC EQUIPMENT
A Full Range of Spare Parts is available for all equipment
22 HEX MOIL, CHISEL AND SPADE
PART NUMBER
OVERALL LENGTH (L)
END TYPE
MP-22083HM-0380
380mm
Moil
MP-22083HM-0460
450mm
Moil
CHI-22083HM-0380
380mm
Chisel
CHI-22083HM-0450
450mm
Chisel
CHI-22083HM-0380-75W
460mm
Spade
16
GROUTING EQUIPMENT
ROOF BOLTING - POST GROUTING - LONG HOLE GROUTING - SPRAYING
Sales - Hire - Service
RECIPROCATING SINGLE PISTON PUMP
Air driven, reciprocating, single piston pump. The reciprocating air-motor being directly linked by
the connecting rod to the piston of the pump. This piston has a built in check valve which opens
on the down stroke and closes on the up stroke, the liquid trapped in the riser tube then being
pushed out by the piston as it moves up.
Air Consumption
51m3/hr @ 60PSI (Water Only)
Water Pumping Rate
53l/m
Grout Pumping Rate
23l/m
Maximum Air Pressure
14MPa
Weight
21Kg
GROUTING EQUIPMENT
TECHNICAL SPECIFICATIONS
MIXER & BOWL - CHOICE OF 63 LITRE OR 160 LITRE CAPACITY
• Safety cage standard on all units
MIXER TECHNICAL SPECIFICATIONS
Air Consumption
26l/s@620kPa
Max. Working Air Pressure
100 PSI (650kPa)
Operating Speed (No Load)
150 r.p.m.
Stall Torque
155FT/LBS (210.15 Nm)
Hose Connection
3⁄4” BSP
Weight
13kg
MIXING BOWL COMPLETE UNITS
Includes: Mixing Drum, Cross Head, Paddle Assembly & Mixer Motor
Part Number
Bowl Capacity
Bowl Material
Dry Weight
WH-970
160L
Mild Steel
65Kg (Including Air Motor)
A Full Range of Spare Parts is available for all equipment
17
ROCK DRILL AIR LUBRICATORS
AIR OPERATED ADJUSTABLE OIL LUBRICATORS
PART
NUMBER
THREAD
OIL
CAPACITY
MAX
WP
DX-08-066-02-000
1” BSP
1.2L
300 PSI
COMPONENT MATERIALS
BODY
VENTURI
JET
BUNDY TUBES
Mild Steel
Cast Steel
Mild Steel
Copper
ROCK DRILL AIR LUBRICATORS
Air lubricator setup guide available at back of catalogue
IN-LINE LUBRICATORS - PLASTIC BODY (S/S HOUSING)
PART NUMBER
THREAD
OIL CAPACITY
WORK
PRESSURE
FLOW RATE
(MAX)
FF-FKY200
3/4” BSP
200 mL
150 PSI
5 mL/hr
18
ROCK DRILL Y-PIECES
Rock Drill Y-Pieces complete with minsup Type-A fittings. Available in both standard A/W and FRAS
Delivery Hose
Standard Y-Piece configuration:
HOSE GRADE
Y-PIECE-HOSE
Standard A/W Delivery
Y-PIECE-HOSE-FR
FRAS Delivery
ROCK DRILL Y-PIECES
PART NUMBER
19
ROCK DRILL DOLLIES
All spanners have premium hardened steel sockets
HAND HELD ROCK DRILL SPANNERS - 22 HEX DRIVE
Shank 22 x 70mm
PART NUMBER
OVERALL LENGTH (L)
WEIGHT
SP-22HM-0300-36
300mm
1.55 Kg
SP-22HM-0500-36
500mm
2.55 Kg
SP-22HM-0600-36
600mm
3.05 Kg
ROOF BOLT SPANNERS
* Other sockets can be manufactured on request
20
DRIFTING AND TUNNELING
R32 MALE / FEMALE DRILL RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MF-R32-1200
1200mm
MF-R32-1800
1800mm
MF-R32-2400
2400mm
MF-R32-3100
3100mm
MF-R32-3600
3600mm
MF-R32-4300
4300mm
MF-R32-5500
5500mm
DRIFTING AND TUNNELING
R32 MALE / MALE DRILL RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MM-R32-1800
1800mm
MM-R32-3100
3100mm
MM-R32-3600
3600mm
COUPLING SLEEVE
CP-R32F-R32F
R32 Coupling
21
R32 SPHERICAL BUTTON DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-R32-43-H
N/A
43mm
BB-R32-45-H
N/A
45mm
BB-R32-48-H
N/A
48mm
BB-R32-51-H
N/A
51mm
BB-R32-57-H
N/A
57mm
BB-R32-64-H-FF
Flat Face
64mm
BB-R32-64-H-DC
Drop Centre
64mm
BB-R32-76-H-FF
Flat Face
76mm
BB-R32-76-H-DC
Drop Centre
76mm
DRIFTING AND TUNNELING
R32 BALLISTIC BUTTON DRILL BITS
PART NUMBER
DIAMETER (D)
BB-R32-43-B
N/A
43mm
BB-R32-45-B
N/A
45mm
BB-R32-48-B
N/A
48mm
BB-R32-51-B
N/A
51mm
BB-R32-57-B
N/A
57mm
BB-R32-64-B-FF
Flat Face
64mm
BB-R32-64-B-DC
Drop Centre
64mm
BB-R32-76-B-FF
Flat Face
76mm
BB-R32-76-B-DC
Drop Centre
76mm
22
R32 SPHERICAL BUTTON RETRAC DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-R32-51-H
N/A
51mm
RTB-R32-57-H
N/A
57mm
RTB-R32-64-H-FF
Flat Face
64mm
RTB-R32-64-H-DC
Drop Centre
64mm
RTB-R32-76-H-FF
Flat Face
76mm
RTB-R32-76-H-DC
Drop Centre
76mm
R32 BALLISTIC BUTTON RETRAC DRILL BITS
FACE TYPE
DIAMETER (D)
RTB-R32-51-B
N/A
51mm
RTB-R32-57-B
N/A
57mm
RTB-R32-64-B-FF
Flat Face
64mm
RTB-R32-64-B-DC
Drop Centre
64mm
RTB-R32-76-B-FF
Flat Face
76mm
RTB-R32-76-B-DC
Drop Centre
76mm
DRIFTING AND TUNNELING
PART NUMBER
R32 CROSS DRILL BITS
PART NUMBER
DIAMETER (D)
XB-R32-41
41mm
XB-R32-45
45mm
XB-R32-51
51mm
XB-R32-57
57mm
23
MALE / MALE DRIFTER RODS - R32 - R25
PART NUMBER
EFFECTIVE LENGTH (L)
DF-R32M-R25M-25H2400
2400mm
DF-R32M-R25M-25H3100
3100mm
DF-R32M-R25M-25H3600
3600mm
MALE / MALE DRIFTER RODS - R38 - R32
PART NUMBER
EFFECTIVE LENGTH (L)
DF-R38M-R32M-35H2400
2400mm
DF-R38M-R32M-35H3100
3100mm
DF-R38M-R32M-35H3600
3600mm
DF-R38M-R32M-35H4300
4300mm
DRIFTING AND TUNNELING
MALE / MALE DRIFTER RODS - T38 - R32
PART NUMBER
EFFECTIVE LENGTH (L)
DF-T38M-R32M-35H2400
2400mm
DF-T38M-R32M-35H3100
3100mm
DF-T38M-R32M-35H3600
3600mm
DF-T38M-R32M-35H4300
4300mm
24
ADAPTORS
CROSSOVER COUPLINGS
PART NUMBER
DESCRIPTION
CP-R32F-R25F
Coupling Cross Over R32 - R25
CP-R38F-R32F
Coupling Cross Over R38 - R32
CP-T38F-R32F
Coupling Cross Over T38 - R32
BIT ADAPTORS
DESCRIPTION
BA-LH-R25F-R32M
Bit Adaptor R25 Female - R32 Male
BA-LH-R32F-R25M
Bit Adaptor R32 Female - R25 Male
BA-LH-R32F-T38M
Bit Adaptor R32 Female - T38 Male
BA-LH-R38F-R32M
Bit Adaptor R38 Female - R32 Male
BA-LH-R38F-T38M
Bit Adaptor R38 Female - T38 Male
BA-LH-ST58F-ST68M
Bit Adaptor ST58 Female - ST68 Male
BA-LH-T38F-R32M
Bit Adaptor T38 Female - R32 Male (Pictured Below)
BA-LH-T38F-R38M
Bit Adaptor T38 Female - R38 Male
BA-LH-T38F-T45M
Bit Adaptor T38 Female - T45 Male
BA-LH-T45F-T38M
Bit Adaptor T45 Female - T38 Male (Pictured Below)
BA-LH-T45F-T51M
Bit Adaptor T45 Female - T51 Male
BA-LH-T51F-T45M
Bit Adaptor T51 Female - T45 Male
BA-LH-R25M-R25M
Bit Adaptor R25 Male - R25 Male
BA-LH-R32M-R32M
Bit Adaptor R32 Male - R32 Male
BA-LH-T45M-T45M
Bit Adaptor T45 Male - T45 Male
ADAPTORS
PART NUMBER
* Other adaptors can be made to order
25
BENCH AND LONG HOLE DRILLING
T38 MALE / FEMALE DRILL RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MF-T38-0900
900mm
MF-T38-1200
1200mm
MF-T38-1500
1500mm
MF-T38-1800
1800mm
MF-T38-2400
2400mm
MF-T38-3100
3100mm
MF-T38-3600
3600mm
MF-T38-4300
4300mm
PART NUMBER
EFFECTIVE LENGTH (L)
MM-T38-1800
1800mm
MM-T38-3100
3100mm
MM-T38-3600
3600mm
BENCH AND LONG HOLE DRILLING
T38 MALE / MALE DRILL RODS
COUPLING SLEEVE
CP-T38F-T38F
T38 Coupling
26
T38 SPHERICAL BUTTON DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-T38-64-H-FF
Flat Face
64mm
BB-T38-64-H-DC
Drop Centre
64mm
BB-T38-76-H-FF
Flat Face
76mm
BB-T38-76-H-DC
Drop Centre
76mm
BB-T38-89-H-FF
Flat Face
89mm
BB-T38-89-H-DC
Drop Centre
89mm
FLAT FACE
DROP CENTRE
T38 BALLISTIC BUTTON DRILL BITS
FACE TYPE
DIAMETER (D)
BB-T38-64-B-FF
Flat Face
64mm
BB-T38-64-B-DC
Drop Centre
64mm
BB-T38-76-B-FF
Flat Face
76mm
BB-T38-76-B-DC
Drop Centre
76mm
BB-T38-89-B-FF
Flat Face
89mm
BB-T38-89-B-DC
Drop Centre
89mm
FLAT FACE
FLAT FACE
BENCH AND LONG HOLE DRILLING
PART NUMBER
DROP
DROP
CENTRE
CENTRE
27
T38 SPHERICAL BUTTON RETRAC DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-T38-64-H-FF
Flat Face
64mm
RTB-T38-64-H-DC
Drop Centre
64mm
RTB-T38-76-H-FF
Flat Face
76mm
RTB-T38-76-H-DC
Drop Centre
76mm
RTB-T38-89-H-FF
Flat Face
89mm
RTB-T38-89-H-DC
Drop Centre
89mm
FLAT FACE
DROP CENTRE
T38 BALLISTIC BUTTON RETRAC DRILL BITS
FACE TYPE
DIAMETER (D)
RTB-T38-64-B-FF
Flat Face
64mm
RTB-T38-64-B-DC
Drop Centre
64mm
RTB-T38-76-B-FF
Flat Face
76mm
RTB-T38-76-B-DC
Drop Centre
76mm
RTB-T38-89-B-FF
Flat Face
89mm
RTB-T38-89-B-DC
Drop Centre
89mm
FLAT FACE
FLAT FACE
BENCH AND LONG HOLE DRILLING
PART NUMBER
DROP
DROP
CENTRE
CENTRE
28
T45 MALE / FEMALE DRILL RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MF-T45-1800
1800mm
MF-T45-3100
3100mm
MF-T45-3600
3600mm
MF-T45-4300
4300mm
T45 MALE / MALE DRILL RODS
EFFECTIVE LENGTH (L)
MM-T45-1800
1800mm
MM-T45-3100
3100mm
MM-T45-3600
3600mm
BENCH AND LONG HOLE DRILLING
PART NUMBER
COUPLING SLEEVE
CP-T45F-T45F
T45 Coupling
29
T45 SPHERICAL BUTTON DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-T45-76-H-FF
Flat Face
76mm
BB-T45-76-H-DC
Drop Centre
76mm
BB-T45-89-H-FF
Flat Face
89mm
BB-T45-89-H-DC
Drop Centre
89mm
BB-T45-102-H-FF
Flat Face
102mm
BB-T45-102-H-DC
Drop Centre
102mm
BB-T45-115-H-FF
Flat Face
115mm
BB-T45-115-H-DC
Drop Centre
115mm
BB-T45-127-H-FF
Flat Face
127mm
BB-T45-127-H-DC
Drop Centre
127mm
FLAT FACE
DROP CENTRE
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-T45-76-B-FF
Flat Face
76mm
BB-T45-76-B-DC
Drop Centre
76mm
BB-T45-89-B-FF
Flat Face
89mm
BB-T45-89-B-DC
Drop Centre
89mm
BB-T45-102-B-FF
Flat Face
102mm
BB-T45-102-B-DC
Drop Centre
102mm
BB-T45-115-B-FF
Flat Face
115mm
BB-T45-115-B-DC
Drop Centre
115mm
BB-T45-127-B-FF
Flat Face
127mm
BB-T45-127-B-DC
Drop Centre
127mm
FLAT FACE
BENCH AND LONG HOLE DRILLING
T45 BALLISTIC BUTTON DRILL BITS
DROP CENTRE
30
T45 SPHERICAL BUTTON RETRAC DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-T45-76-H-FF
Flat Face
76mm
RTB-T45-76-H-DC
Drop Centre
76mm
RTB-T45-89-H-FF
Flat Face
89mm
RTB-T45-89-H-DC
Drop Centre
89mm
RTB-T45-102-H-FF
Flat Face
102mm
RTB-T45-102-H-DC
Drop Centre
102mm
RTB-T45-115-H-FF
Flat Face
115mm
RTB-T45-115-H-DC
Drop Centre
115mm
RTB-T45-127-H-FF
Flat Face
127mm
RTB-T45-127-H-DC
Drop Centre
127mm
FLAT FACE
DROP CENTRE
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-T45-76-B-FF
Flat Face
76mm
RTB-T45-76-B-DC
Drop Centre
76mm
RTB-T45-89-B-FF
Flat Face
89mm
RTB-T45-89-B-DC
Drop Centre
89mm
RTB-T45-102-B-FF
Flat Face
102mm
RTB-T45-102-B-DC
Drop Centre
102mm
RTB-T45-115-B-FF
Flat Face
115mm
RTB-T45-115-B-DC
Drop Centre
115mm
RTB-T45-127-B-FF
Flat Face
127mm
RTB-T45-127-B-DC
Drop Centre
127mm
FLAT FACE
BENCH AND LONG HOLE DRILLING
T45 BALLISTIC BUTTON RETRAC DRILL BITS
DROP CENTRE
31
T51 MALE / FEMALE DRILL RODS
PART NUMBER
EFFECTIVE LENGTH (L)
MF-T51-3600
3600mm
MF-T51-4300
4300mm
MF-T51-6000
6000mm
T51 MALE / MALE DRILL RODS
EFFECTIVE LENGTH (L)
MM-T51-0900
900mm
MM-T51-3600
3600mm
MM-T51-5000
5000mm
MM-T51-6000
6000mm
BENCH AND LONG HOLE DRILLING
PART NUMBER
COUPLING SLEEVE
CP-T51F-T51F
T51 Coupling
32
T51 SPHERICAL BUTTON DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-T51-76-H-FF
Flat Face
76mm
BB-T51-76-H-DC
Drop Centre
76mm
BB-T51-89-H-FF
Flat Face
89mm
BB-T51-89-H-DC
Drop Centre
89mm
BB-T51-102-H-FF
Flat Face
102mm
BB-T51-102-H-DC
Drop Centre
102mm
BB-T51-115-H-FF
Flat Face
115mm
BB-T51-115-H-DC
Drop Centre
115mm
BB-T51-127-H-FF
Flat Face
127mm
BB-T51-127-H-DC
Drop Centre
127mm
BB-T51-140-H-FF
Flat Face
140mm
BB-T51-140-H-DC
Drop Centre
140mm
BB-T51-152-H-FF
Flat Face
152mm
BB-T51-152-H-DC
Drop Centre
152mm
BB-T51-165-H-FF
Flat Face
165mm
BB-T51-165-H-DC
Drop Centre
165mm
BENCH AND LONG HOLE DRILLING
FLAT FACE
DROP CENTRE
33
T51 BALLISTIC BUTTON DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
BB-T51-76-B-FF
Flat Face
76mm
BB-T51-76-B-DC
Drop Centre
76mm
BB-T51-89-B-FF
Flat Face
89mm
BB-T51-89-B-DC
Drop Centre
89mm
BB-T51-102-B-FF
Flat Face
102mm
BB-T51-102-B-DC
Drop Centre
102mm
BB-T51-115-B-FF
Flat Face
115mm
BB-T51-115-B-DC
Drop Centre
115mm
BB-T51-127-B-FF
Flat Face
127mm
BB-T51-127-B-DC
Drop Centre
127mm
BB-T51-140-B-FF
Flat Face
140mm
BB-T51-140-B-DC
Drop Centre
140mm
BB-T51-152-B-FF
Flat Face
152mm
BB-T51-152-B-DC
Drop Centre
152mm
BB-T51-165-B-FF
Flat Face
165mm
BB-T51-165-B-DC
Drop Centre
165mm
BENCH AND LONG HOLE DRILLING
FLAT FACE
DROP CENTRE
34
T51 SPHERICAL BUTTON RETRAC DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-T51-76-H-FF
Flat Face
76mm
RTB-T51-76-H-DC
Drop Centre
76mm
RTB-T51-89-H-FF
Flat Face
89mm
RTB-T51-89-H-DC
Drop Centre
89mm
RTB-T51-102-H-FF
Flat Face
102mm
RTB-T51-102-H-DC
Drop Centre
102mm
RTB-T51-115-H-FF
Flat Face
115mm
RTB-T51-115-H-DC
Drop Centre
115mm
RTB-T51-127-H-FF
Flat Face
127mm
RTB-T51-127-H-DC
Drop Centre
127mm
RTB-T51-140-H-FF
Flat Face
140mm
RTB-T51-140-H-DC
Drop Centre
140mm
RTB-T51-152-H-FF
Flat Face
152mm
RTB-T51-152-H-DC
Drop Centre
152mm
RTB-T51-165-H-FF
Flat Face
165mm
RTB-T51-165-H-DC
Drop Centre
165mm
BENCH AND LONG HOLE DRILLING
FLAT FACE
DROP CENTRE
35
T51 BALLISTIC BUTTON RETRAC DRILL BITS
PART NUMBER
FACE TYPE
DIAMETER (D)
RTB-T51-76-B-FF
Flat Face
76mm
RTB-T51-76-B-DC
Drop Centre
76mm
RTB-T51-89-B-FF
Flat Face
89mm
RTB-T51-89-B-DC
Drop Centre
89mm
RTB-T51-102-B-FF
Flat Face
102mm
RTB-T51-102-B-DC
Drop Centre
102mm
RTB-T51-115-B-FF
Flat Face
115mm
RTB-T51-115-B-DC
Drop Centre
115mm
RTB-T51-127-B-FF
Flat Face
127mm
RTB-T51-127-B-DC
Drop Centre
127mm
RTB-T51-140-B-FF
Flat Face
140mm
RTB-T51-140-B-DC
Drop Centre
140mm
RTB-T51-152-B-FF
Flat Face
152mm
RTB-T51-152-B-DC
Drop Centre
152mm
RTB-T51-165-B-FF
Flat Face
165mm
RTB-T51-165-B-DC
Drop Centre
165mm
BENCH AND LONG HOLE DRILLING
FLAT FACE
DROP CENTRE
36
SHANK ADAPTORS
ATLAS COPCO
L
D
SPLINE OD
SPLINE L
THREAD
DRIFTER
340mm
45mm
54mm
58mm
R32
COP1032 HD
550mm
44.9mm
53.9mm
58.5mm
T35
COP1032
485mm
38mm
54mm
74mm
R32
COP1038 HD/1238
485mm
38mm
54mm
74mm
R38
485mm
38mm
54mm
74mm
T38
485mm
38mm
54mm
74mm
R38
485mm
38mm
54mm
74mm
T38
500mm
38mm
54mm
74mm
R32
500mm
38mm
54mm
74mm
T38
500mm
45mm
54mm
74mm
T45
435mm
38mm
54mm
84.5mm
R38
435mm
38mm
54mm
84.5mm
T35
435mm
38mm
54mm
84.5mm
T38
435mm
38mm
54mm
84.5mm
R32
525mm
52mm
53.9mm
84.5mm
T38
525mm
52mm
53.9mm
84.5mm
T45
525mm
52mm
53.9mm
84.5mm
T51
COP1238
COP1432,
COP1532,
COP1440,
COP1838 HD/ME
37
SHANK ADAPTORS
COP1550,
COP1838 ME/HE
FURUKAWA
L
D
SPLINE OD
SPLINE L
THREAD
655mm
45mm
64.4mm
79mm
T38
655mm
45mm
64.4mm
79mm
T45
710mm
50.8mm
64.9mm
89mm
T45
SPLINE OD
SPLINE L
THREAD
DRIFTER
FURUKAWA
HD260, HD300
FURUKAWA
HD612
GARDNER-DENVER, INGERSOLL-RAND & REEDRILL
L
D
330mm
44.3mm
55.5mm
64mm
R32
350mm
44.3mm
55.5mm
64mm
R38
446mm
44.3mm
55.5mm
64mm
T38
380mm
44.3mm
55.5mm
64mm
T38
495mm
45mm
64.3mm
85mm
T38
500mm
45mm
64.3mm
85mm
T45
SPLINE OD
SPLINE L
THREAD
DRIFTER
GARDENERDENVER PR123
INGERSOLL-RAND
VL140
INGERSOLL-RAND
YH65, YH80
MONTABERT
D
DRIFTER
SHANK ADAPTORS
L
490mm
45mm
59.7mm
95mm
T45
MONTABERT
HC120, HC150
670mm
51mm
59.7mm
102mm
T51
MONTABERT
HC80R, HC120R,
HC150R
38
SANDVIK
L
D
SPLINE OD
SPLINE L
THREAD
DRIFTER
400mm
32mm
58.8mm
39mm
R32
HL300
245mm
45mm
58.8mm
39mm
R28
HL300S
245mm
45mm
58.8mm
39mm
R32
550mm
38mm
58.8mm
49mm
R32
550mm
38mm
58.8mm
49mm
T35
550mm
38mm
58.8mm
49mm
T38
550mm
45mm
58.8mm
49mm
R32
550mm
45mm
58.8mm
49mm
T35
550mm
45mm
58.8mm
49mm
T38
550mm
45mm
58.8mm
49mm
T45
550mm
45mm
58.8mm
49mm
T35
500mm
45mm
58.8mm
49mm
R38
500mm
45mm
58.8mm
49mm
T38
500mm
45mm
58.7mm
49mm
R32
500mm
45mm
58.7mm
49mm
T35
500mm
45mm
58.7mm
49mm
T38
500mm
45mm
58.7mm
49mm
R38
550mm
45mm
58.7mm
49mm
R32
550mm
45mm
58.7mm
49mm
T35
550mm
45mm
58.7mm
49mm
T38
550mm
45mm
58.7mm
49mm
T45
600mm
45mm
60mm
75mm
R32
600mm
45mm
60mm
75mm
T38
600mm
45mm
60mm
75mm
T45
525mm
45mm
60mm
75mm
T38
525mm
45mm
60mm
75mm
T45
650mm
52mm
60mm
75mm
T45
650mm
52mm
60mm
75mm
T51
HL500-38/510-38
HL500-45/510-45
HL 550 SUPER /
560 SUPER / 510
S-45
HLX 5 / HLX 5T
SHANK ADAPTORS
HL 600-45 /
HL 600 S-45 /
HL 600-52
39
SANDVIK
L
D
SPLINE OD
SPLINE L
THREAD
600mm
45mm
69mm
95mm
T38
600mm
45mm
69mm
95mm
T45
600mm
52mm
69mm
95mm
T38
600mm
52mm
69mm
95mm
T45
600mm
52mm
69mm
95mm
T51
670mm
52mm
79mm
75mm
T45
670mm
52mm
79mm
75mm
T51
590mm
52mm
79mm
75mm
T45
590mm
52mm
79mm
75mm
T51
DRIFTER
HL 650/700-45
HL 650/700-52
HL 1000-52 / HL
1000 S-52
SHANK ADAPTORS
40
HOSES, FITTINGS VALVES & OTHER ACCESSORIES
Full Range of Valves
•Econovalve
•Butterfly
•Swing Check
•Pressure Reducing
Hoses and Fittings
• Air / Water
• FRAS
• Suction
• Delivery
Whipchecks
Strainers
HOSES, FITTINGS, VALVES & OTHER ....
To view our full range of these products please see our
Industrial Accessories For Mining And Construction Catalogue
41
The correct set-up and adjustment of the Oil Lubricator "Turtle" is critical to ensuring the
performance and reliability of the pneumatic equipment. Too much oil is as bad as too
little; oil is basically only required to provide some lubricant for the air motor. These
instructions are for the 'Minsup' Oil Lubricator but the principles will be similar for other
types.
Set-up of Lubricator
The lubricator should be installed in line of
the air hose, no more than 5m from the
pneumatic rockdrill.
Safety clips must be used to ensure that
high pressure air fittings cannot become
accidentally disconnected.
The arrow marked on the top of the
lubricator indicates the direction that the air
should be flowing (should be pointing at the
pneumatic rockdrill).
To check or fill the oil in the Lubricator,
remove the filler cap by placing a large
screwdriver across the cap and undoing
anti-clockwise.
Most pneumatic drills are designed to be
run using a light rockdrill oil 20-30 grade.
The lubricator should only be half filled (if
you look inside the lubricator, oil should not
be over the copper pipe) this should be
sufficient for at least a full shift.
Signs of over-oiling of a rockdrill include the
following:
• Excessive oil vapor in the air
• Oil dripping out from the motor muffler
• Legs sticking (if applicable) and valves not
dumping air
Expertise You Can Depend On
OIL LUBRICATOR ADJUSTMENT
Oil Lubricator Adjustment
Next unscrew the locking nut using a
straight blade screwdriver.
(Note: this brass nut should not be confused
with the adjustment screw which sits
underneath).
To set up the lubricator, using a flat blade
screwdriver first turn the adjustor fully
clockwise, then turn back 1 1/3 turns.
Testing of oil flow
The adjustment of the Lubricator can be
tested by setting up a piece of cardboard
approx. 1 m from the air outlet of the
lubricator. Carefully turn on the air supply
(this should be 3000lpm at 7bar).
The air should contain a fine mist of oil
which will leave a damp mark on the
cardboard, approximately 50mm diameter.
If running droplets of oil appear, this is
evidence of over oiling.
Safety points when testing:
• Wear safety glasses & ear protection
• Beware of air blast from outlet hole, hold
lubricator body firmly
• Test in a safe area, away from other
personnel
Expertise You Can Depend On
OIL LUBRICATOR ADJUSTMENT
Adjustment of oil flow to adjust the rate of oil
flow, first remove the 1/4” BSP plug on top
of the lubricator using a 6mm Allen key.