PLL LED Lamp

S- type
PLL LED Lamp - Hight Voltage
PLL LED Lamp
Non-dimmable
410mm
Base Type : 2G11
Input Voltage : H:100~240V
LED Source : Nichia / Epistar 3020
410mm-Beam Angle : 120°
533/560mm-Beam Angle : 115°
Total Power Consumption : 21W±10%
533mm
Safety & Environment Specifications
S-Type-PLL LED Lamp Light bulbs are manufactured to conform to the following safety
approbation.
REACH
Certificated Mark
Certificate Approval
●
●

●
●
Certificate Approval : ● : Completed : In Progress
Rev:01 201506 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
1
Specification
Polar Diagram
No.
Part Number
LED Source
Input Voltage
Typical
Power
C.R.I.
Beam Angle
(°)
CBCP
Candela
(cd)
Total Pow.
(RA)
2700K
80
120
500
21
1525
73
NO
0.9
3000K
80
120
545
21
1660
79
NO
0.9
5000K
70
120
600
21
1825
87
NO
0.9
650
21
1980
94
NO
0.9
21
1950
93
NO
0.9
21
2125
101
NO
0.9
M2340
EN
111
NO
0.9
121
NO
0.9
CCT
Lumens
+/-10%
(lm)
Efficiency
(lm/W)
Dimming
Factor
H1
410mm
1
BLS4102G11CC-NVW12005H
N-157
2
BLS4102G11CC-NWW12005H
N-157
3
BLS4102G11CC-NCW12005H
N-157
4
BLS4102G11CC-NW12005H
N-157
5700K
70
120
5
BLS4102G11CC-OVW12005H
EPISTAR 3020
2700K
80
120
6
BLS4102G11CC-OWW12005H
EPISTAR 3020
3000K
80
7
BLS4102G11CC-ONW12005H
EPISTAR 3020
4000K
80
8
BLS4102G11CC-OW12005H
EPISTAR 3020
5700K
70
120
2700K
80
115
545
21
1840
88
NO
0.9
3000K
80
115
590
21
1995
95
NO
0.9
5000K
70
115
645
21
2175
104
NO
0.9
Universal
100-240V
Universal
100-240V
120UNDER
120
MEA
S21
URE
21
T
2535
533mm
9
BLS5332G11CC-NVW14405H
N-157
10 BLS5332G11CC-NWW14405H
N-157
11 BLS5332G11CC-NCW14405H
N-157
12 BLS5332G11CC-NW14405H
N-157
5700K
70
115
710
21
2395
114
NO
0.9
13 BLS5332G11CC-OVW14405H
EPISTAR 3020
2700K
80
115
545
21
1840
88
NO
0.9
14 BLS5332G11CC-OWW14405H
EPISTAR 3020
3000K
80
115
590
21
1995
95
NO
0.9
15 BLS5332G11CC-ONW14405H
EPISTAR 3020
4000K
80
115
645
21
2175
104
NO
0.9
16 BLS5332G11CC-OW14405H
EPISTAR 3020
5700K
70
115
710
21
2395
114
NO
0.9
2700K
80
110
490
21
1840
88
NO
0.9
3000K
80
110
540
21
1995
95
NO
0.9
5000K
70
110
590
21
2175
104
NO
0.9
Universal
100-240V
Universal
100-240V
560mm
17 BLS5602G11CC-NVW16805H
N-157
18 BLS5602G11CC-NWW16805H
N-157
19 BLS5602G11CC-NCW16805H
N-157
20 BLS5602G11CC-NW16805H
N-157
5700K
70
110
640
21
2395
114
NO
0.9
21 BLS5602G11CC-OVW16805H
EPISTAR 3020
2700K
80
115
625
21
1930
92
NO
0.9
22 BLS5602G11CC-OWW16805H
EPISTAR 3020
3000K
80
115
690
21
2125
101
NO
0.9
23 BLS5602G11CC-ONW16805H
EPISTAR 3020
4000K
80
115
653
21
1315
63
NO
0.9
24 BLS5602G11CC-OW16805H
EPISTAR 3020
5700K
70
115
815
21
2510
120
NO
0.9
Universal
100-240V
Universal
100-240V
Option 1 : Lamp base: 2G11
Option 2 : Input voltage H:100~240V
Option 3 : The above CCT. is defined based on ANSI standard. Specific color temperature can be done upon customer request. For instance 2700K could be assigned as 2580~2725K or 2725~2870K, the same can be accomplished for 3500K and 5500K as
well but shall be with different price.2200K is also available upon request.2200K is also available upon request.
Option 4 : 4700~6700K typical CRI +70; 2580~4500K typical CRI +80; CRI+90 is also available upon request.
Certificate Approval :
RoHS
COMPLIANT
45TH
S TYPE PLL LED Lamp
Rev:01 201506 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
2
2D Drawing
Product Packing PLL LED
Step 1
Step 2
Gife Box/ White Box 1Pc of Lamp
Dimensions(mm) L:445*W:70*H:46
L:573/600*W:70*H:46
Step 3
Inner Carton 5 Boxes
Dimensions(mm) L:465*W:250*H:90
L:583/610*W:250*H:85
Lamp body material
Outer Carton 2 Inner Cartons (10 White Boxes)
Dimensions(mm) L:485*W:270*H:200
L:603/630*W:270*H:195
Dimension (mm) Ø:
Net Weight (g)
24
23
42
43
COVER : PC
410
PLASTIC HOUSING : PC
417
BASE : NPB
43
42
533
540
43
42
560
567
No sealed fixtures
Base 2G11
Not for outdoor fixtures
Net Weight (g)
Luminaire Notice
The LED Lamp is not compatible with all luminaires for halogen lamps.
Before installation, please read following guidelines:
-No sealed fixtures.
-Not for outdoor fixtures.
-Not for wet environment.
-Not for integral primary optics.
Live and Neutral Wire pin
will be soldered.
L(Live Wire) N(Neutral Wire)
2G11
S TYPE PLL LED Lamp
Rev:01 201506 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
3
Installation Procedure:
To be Carried Out by a Qualified Person
1) Ensure that mains supply is switched off before installation, maintenance or lamp replacement.
2) Where applicable, remove diffuser, existing lamp(s) and starter.
3) Remove/bypass existing ballast and connect Live and Neutral.
4) Insert the BLTC LED Lamp.
5) Ensure all screws/clips are secured, wiring is safely protected and diffusers replaced before switching on power.
Tradition
power
LED
Ballest
Tradition
power
Ballest
LED
power
power
Ballest
Ballest
Safety Label & Warning
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o not cover lamp with paper, fabric, or any flammable material to avoid burning.
D
Working Environmental Temperature: -20 ~ +40°
Do not insert metal objects into the gap of lamp base.
The appropriate combination of lamp and lamp base should be carefully selected for different voltage and wattage.
Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version)
Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and burning.
Do not use near flammable objects such as gasoline, spray, chemicals, paints, oil…etc.
Do not use in place that is likely to be impacted by force or vibration.
Do not use in acidic environment.
Please turn the light off when installing or cleaning to avoid electrical shock.
Please handle with care to avoid damage and collision.
Do not touch any powered-on lamps or lamps that have just been turned off to avoid burning.
Please ensure the lamp is tightly installed into the socket to avoid dropping.
Please select the appropriate fixture based on lamp size and weight.
General Guideline
•
•
•
•
•
•
•
•
•
•
•
•
Slight difference of color temperature and brightness is likely to occur for the same part number due to the difference of LED chips.
Brightness, color temperature, and light distribution may vary with different types of bulbs.
To avoid heat build-up and the shortening of product lifetime, sealed fixture is not recommended.
Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference.
Do not install lamp in heal insulated fixture.
Do not disassemble or reconstruct the lamp.
Do not stare directly at the lamp to avoid eye injury.
The light distribution may vary with different type of fixtures.
Do not wash the lamp with water.
Do not use the lamp outdoor if it is not marked as IP65.
To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65.
For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to
the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact
making and lamp retention.
S TYPE PLL LED Lamp
Rev:01 201506 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
4