Holdtite Brochure - Access Fasteners | Australia

Bonding Solutions
• Thread Lockers • Retainers • Gasketing
• Metal Fill • Thread Sealants • RTV Silicone
• Antiseize Agents • Instant Adhesives
• Structural Bonding • UV Bonding • Polyurethanes
“Liquid products, solid solutions”
INNOVATIVE SOLUTIONS TO ALL YOUR
BONDING AND ASSEMBLY NEEDS
Phone 1300 552 680 www.holdtiteaustralia.com.au
HEADER
Bonding Solutions
Holdtite Australia was established on traditional values and long term experience with our
manufacturers in Europe and America in the bonding industry. We are dedicated to quality,
innovation and customer satisfaction.
Our commitment is to produce and distribute innovative solutions to your bonding and
assembly needs. To foster and care for a long term relationship with your company and to
bring you the most up to date and technically superior products. We strive to provide the
highest quality products possible utilising the finest materials and process to manufacture
with unmatchable value and profitability.
Products distributed by Holdtite Australia are produced under a quality system meeting
internationally recognised standards. Full traceability is available for each part of the
process ensuring total uniformity.
From our manufacturing facilities in England and America, Holdtite Australia import a
unique range of adhesives and sealants, offering our customers the choice of formulation
technology to match your present assembly/adhesion selection, or your desire to source
an alternative supply.
Professional distribution plays a vital role in Holdtite Australia’s policy of continuous
expansion and market penetration. Holdtite Australia have the back up of a full sales
package giving our customers the reassurance of a product highly acclaimed for quality,
reliability and matching specification. Our products are not only among the best products
available, but are also competitively priced.
Holdtite Australia is the bonding solution.
Harald Schaaf
Company Director
“Liquid products, solid solutions”
1
CONTENTS
Mission Statement ......................................................................... 1
Contents .......................................................................................... 2
Threadlockers ................................................................................. 3
Retaining ......................................................................................... 4
Gasketing ........................................................................................ 5
Sealing ............................................................................................. 6
RTV Silicone ................................................................................ 7-8
Instant Bonding .............................................................................. 9
Epoxy ............................................................................................. 10
Structural Bonding ....................................................................... 11
Polyurethane ................................................................................. 12
Lubricants/Antiseize/Hand Cleaners .......................................... 13
Surface Preparation ..................................................................... 14
Standards, Quality & Specifications ........................................... 15
Certificates.................................................................................... 16
Anaerobics FAQ’s ......................................................................... 17
Comparison Chart ........................................................................ 18
All Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS)
available at our website www.holdtiteaustralia.com.au
INFORMATION LINE: 1300 552 680
2
THREADLOCKERS
FOR UNASSEMBLED NUTS & BOLTS
T22
THREADLOCKER
SCREWLOK - PURPLE, LOW STRENGTH
For small fasteners that require re-adjustment or easy disassembly
including keyed fasteners. Seals threaded fasteners from leakage.
Ideal on small set screws, nuts, bolts, threads and brass etc.
Prevents loosening under loads or vibration.
T43
THREADLOCKER
NUT LOCK - BLUE, MEDIUM STRENGTH
(OIL TOLERANT GRADE)
Convenient all purpose locker suitable for most operating conditions.
Oil tolerant torque tensioning grade designed for direct application
onto “as received” parts, with protective film. Prevents corrosion
between threads. Prevents loosening under loads or vibration.
T62
THREADLOCKER
STUDLOCK / LUBRICATOR - RED, MID STRENGTH
Specially developed Mid Strength Threadlocker. Lubricating during
assembly, securing parts with High Strength retention. Will perform
on slightly oily surfaces. Prevents loosening under loads or vibration,
allowing disassembly when required. Prevents corrosion between
threads.
T72
THREADLOCKER
HIGH TEMP / HIGH STRENGTH - RED
FOR ASSEMBLED NUTS & BOLTS
Locks nuts or bolts up to 1 1/2” in diameter in high temp applications.
•
•
•
•
•
T90
Studs on Pressure Vessels
Studs on Locomotive Units
Hydraulic Studs on Presses
Rock Crusher Studs
Cat Track Studs
T77
THREADLOCKER - FAST SETTING
PENETRANT - GREEN, WICK-IN GRADE
Low viscosity, penetrating Threadlocker. Good for close fitting parts
(set screws, pre-assembled fasteners). Use as a weld or porosity
sealant, seeking out casting irregularities, seals parts from leakage.
Prevents loosening of metal threaded fasteners.
THREADLOCKER
STUDLOCK - RED, HIGH STRENGTH
An Anaerobic Locking Compound in the form of a viscous paste
and it is used to give High Strength Locking action. Predominately
for Fasteners of 25 mm (1” size) and above.
•
•
•
•
•
Studs on Pressure Vessels
Studs on Locomotive Units
Hydraulic Studs on Presses
Rock Crusher Studs
Cat Track Studs
Product
Available
Sizes
Product Description
Colour
Approximate
Viscosity (cP)
Maximum
Gap Fill
Break /
Prevail (N.m)
Sealing
Pressure PSI
Temp
Range
Fixture
Time
Primers
Activators
Agency Approvals
T22
10ml, 50ml
& 250ml
Low Strength, Easy to remove.
Fastener smaller than 1/4”
Purple
1200 - 5000 CPS
Thixtropic
0.18mm
6 to10
3 to 6
N/A
-50°C to
150°C
10 - 30
mins
A471
A649
MIL-S-46163A
ASTM D-5363 NSF
T43
10ml, 50ml
& 250ml
Medium Strength, removable.
Fastener 1/4” to 3/4”
Blue
2000 - 12000
CPS Thixtropic
0.38mm
18 to 22
6 to 8
N/A
-53°C to
150°C
5 - 15 mins
A471
A649
MIL-S-46163A
ASTM D-5363
T62
2ml, 10ml,
50ml & 250ml
Medium Strength. Bolts up to 3/4”
Red
1800 - 5000 CPS
0.18mm
19 to 23
15 to 25
N/A
-50°C to
150°C
5 - 20 mins
A471
A649
MIL-S-46163A
ASTM D-5363 NSF
T72
10ml, 50ml
& 250ml
High Strength, High Temp,
Locks nuts or bolts up to 1 1/2”
Red
9500 CPS
0.25mm
28 to 35
28 to 34
N/A
-50°C to
232°C
5-60 mins
A471
A649
N/A
T77
10ml, 50ml
& 250ml
High Strength, Locks nuts or bolts up to 1 1/2”
Red
7000 CPS
0.25mm
28 to 35
28 to 34
N/A
-55°C to
150°C
10-20 mins
A471
A649
MIL-S-46163A
ASTM D-5363
T90
10ml, 50ml
& 250ml
Medium Strength Wick Grade. Used on preassembled fasteners & pours die castings
Green
3-12 CPS
0.1mm
8 to 10
27 to 34
N/A
-55°C to
150°C
5-20 mins
A471
A649
MIL-S-46163A
ASTM D-5363 NSF
3
RETAINING
R41
RETAINER COMPOUND
BEARING FIT-YELLOW
Medium strength easily removable compound securing all types of
bearings, shafts, cylindrical and parts allowing disassembly when
required.
R69
RETAINER COMPOUND
MILD STRENGTH
Holdtite Australia’s R69 Mild Strength Retaining Compound is
a single part, low viscosity, fast curing anaerobic resin used for
bonding rigid assemblies of all types. This material can be used
effectively to increase the strength of most mechanical assemblies.
Holdtite Australia’s R69 is recommended for interference or press fit
parts where large gap filling is not required.
R62
RETAINER COMPOUND
HIGH TEMP RETAINER
Retainer is rated up to 232ºC as the upper operational temperature.
R62 is designed for bonding/securing in a high strength manner, all
types of cylindrically fitted parts. Used on all types of applications
where temperatures exceed the design features of conventional
retainers above 150ºC. R62 develops High Strength at elevated
temperatures. Speed cure R62 by applying localised heat with a
heat gun or place parts in oven @100ºC for 30 minutes. Pre-heating
of parts also accelerates the fixture and ultimate final cure.
R60
R68
RETAINER COMPOUND
METAL FILL
Used to fill and repair cylindrical parts. Press fit repair compound,
designed to quickly re-fit worn parts. Prevents bearing spinout.
Will harden once parts are assembled, allowing easy excess
cleanup outside repair.
RETAINER COMPOUND
EXTRA HIGH STRENGTH
High Strength retention for cylindrical parts under dynamic load/
stresses, keys, splines, gears etc. Fatigue resistant under heavy
loads.
Product
Available
Sizes
Product Description
Colour
Approximate
Viscosity (cP)
Maximum
Gap Fill
Tensile
Sheer Nmm2
Sealing
Pressure
Temp
Range
Fixture
Time
Primers
Activators
Agency Approvals
R41
10ml, 50ml
& 250ml
Mid Strength, low viscoisty Retaining Compound
Yellow
1500 CPS
0.2mm
8 to 16
N/A
-51°C to
150°C
10 - 15
mins
A471
A649
MIL-S-46082B
22473E. DIN 54454
R69
10ml, 50ml
& 250ml
Mild Strength, low viscosity Retaining Compound
Green
125 CPS
0.125mm
11.5
N/A
-51°C to
148°C
10 - 20
mins
A471
A649
MIL-R-46082
ASTM D-5363
GM-1183024
R60
50ml & 250ml
Metal Fill, Quickly re-fits worn parts
Silver/
grey
Paste
0.5mm
>25
N/A
-53°C to
150°C
30 mins
A649
MIL-S-46082B
22473E. DIN 54454
R62
10ml, 50ml
& 250ml
High Temperature, Retaiing Compound
Green
7000 CPS
0.4mm
20
N/A
-55°C to
232°C
30 mins
A471
A649
MIL-S-46082B
22473E. DIN 54454
R68
10ml, 50ml
& 250ml
High Strength, Retaining Compound
Green
2500 CPS
0.3mm
>24
N/A
-53°C to
150°C
30 mins
A471
A649
MIL-S-46082B
22473E. DIN 54454
4
GASKETING
WHAT IS LIQUID GASKETING?
BENEFITS OF HOLDTITE GASKETS
Anaerobic liquid gasketing is designed primarily for
close fitting (and small gap) rigid metal flanges. The
anaerobic material remains liquid when exposed to air
but cures when confined to mating flanges. Anaerobic
liquid gasketing can fill gaps and alleviate the need for
pre-formed gaskets. It is ideal for flanges that move in
service and can be used as form in place gaskets.
• Controlled tolerances, no need for
re-torquing;
• No shrinkage when cured;
• Parts are easily dismantled even after
extended service;
• Resists high pressure when cured.
Holdtite Australia’s range of form in place gasketing
products are ideal for close fitting liquid metal flanges,
particularly flanges that move in service.
G51
DURAFORM GASKET
HIGH TEMPERATURE GASKET - RED
G51 is a fast set, form in place gasket maker for all types of metal
parts, sealing and resisting temperatures up to 200ºC used for
sealing any shape or size of high temperature application, dressing
gaskets or making rigid assemblies. Apply G51 by tube tracing, roll
coating, screen printing, pads etc. Before cure takes place, G51 will
give an instant seal.
G55
FLANGE SEALANT
DESIGNER GASKET - PURPLE
Form in place, tough, flexible gasket. Instant low pressure seal.
Used for fuel and water pumps, split crank cases, gearbox covers,
engine thermostats, small implements etc.
G58
FLANGE SEALANT
SPECIAL GASKET / STIFF PASTE - RED
High viscosity, suitable for aluminium joints. A form in place,
tough, flexible gasket. Instant low pressure seal. Used for fuel tanks,
pumps, crank cases, engine and gearbox covers, chainsaws,
lawn mowers, etc.
GHYB-100
AUTOMOTIVE HYPERSEAL
NON-HARDENING GASKET - BLUE
GHYB-100 is a new technology sealant which is free from solvent
problems of other formulations and stays flexible when cured.
It’s an all purpose, non-cracking, user-friendly formulation.
Product
Available
Sizes
Product Description
Colour
Approximate
Viscosity (cP)
Maximum
Gap Fill
Break /
Prevail (Nm)
Sealing
Pressure
Temp
Range
Fixture
Time
Primers
Activators
Agency Approvals
G51
50ml &
250ml
High Temperature Form In Place Gasket
Red
>50,000 CPS
0.4mm
12.5N/mm2
N/A
-55°C to
200°C
15 mins /
2 hours
A471
MIL-S-22473E
G55
50ml, 250ml
& 300ml
Flexible Gasket Maker
Purple
>275,000/
950,000 CPS
0.5mm
8N/mm2 to
12.5N/mm2
N/A
-55°C to
150°C
up to 24 hours
A471
MIL-S-22473E
G58
50ml &
250ml
Flexible Gasket Maker. Good for Alloy
Red
>800,000/
3,750,000 CPS
0.5mm
8N/mm2 to
12.5N/mm2
N/A
-55°C to
150°C
up to 12 hours
A471
MIL-S-22473E
GHYB100
100ml
Automotive non-hardening gasket
Vibrant
Blue
500 CPS +
- 1000 CPS
0.5mm
N/A
up to
10,000psi
-50°C to
150°C
5 - 10 mins
5
SEALING
S57
S72
PIPE SEALANT WITH PTFE
Anaerobic sealant chemically cures in the absence of air. Locks
and seals threaded fittings. Lubricates and resists corrosion.
Prevents leakage and loosening from vibration and moisture in
hydraulic, pneumatic, steam and process piping. Allows final
adjustment for several hours after application.
S69
THREAD SEALANT WITH TEFLON
PIPE SEAL - WHITE
Instant Low pressure sealant. Seals against oils, chemicals, gases,
steam etc. Sealant used for fine and coarse threads up to 50mm in
diameter. Long curing rate allows re-alignment of elbows and joints.
THREAD SEALANT
SPECIAL HYDRAULIC SEALANT
HIGH STRENGTH-BROWN
S69 Hydraulic Seal is an anaerobic liquid which cures to form a
tough, high pressure seal on all types of threaded couplings used
on low, medium and high pressure lines. Used for all types of
hydraulic connections, threaded couplings and adaptors. Quick
disconnect parts, compression fittings and vibration proofing parts.
S77 & S77U
PIPE SEAL
GAS PIPE SEALANT - YELLOW
AGA Approval # 6900 & AS 4623-2008 Certificate # 7604
S77 is a high viscosity thixotropic gel paste which cures rapidly,
sealing instantly to 10 bar through its Anaerobic cure system in
contact with metals in the absence of air (oxygen). When fully cured
it resists pressure up to 350 bar for non-ferrous threads. S77 is
not suitable for oxygen systems. Typical applications are in sealing
of all types of threaded connections against water, oil, gases and
most common materials conveyed by pipes. When cure speed is
extended due to low temperatures or inactive surfaces, Activator
A471 or the faster A649 can be used. Best results are found if S77
is applied to second or third threadform. Excess can be wiped
away; any migration into lines will not solidify and can be flushed
away during commissioning.
Product
Available
Sizes
Product Description
Colour
Approximate
Viscosity (cP)
Maximum
Gap Fill
Break /
Prevail (Nm)
Sealing
Pressure
Temp
Range
Fixture
Time (Min)
Primers
Activators
Agency Approvals
S54
50mls &
250mls
Tough High Pressure Seal
Brown
1000 - 2750 CPS
0.25mm
20Nm/15Nm
5800psi
-55°C to
150°C
10 - 20 mins
full cure 12hr
A471
A649
MIL-S-22473E
S57
50mls &
250mls
Pipe Sealant with Teflon
White
350,000 CPS
0.5mm
5Nm -25Nm
Instant 100psi
full cure
10,000psi
-55°C to
200°C
45 mins
full cure 24 hr
A471
ANSI/NSF61 Section 6
Drinking Water Systems
S69
50mls &
250mls
Hydraulic Sealant
Brown
400 -800 CPS
0.25mm
20Nm /15Nm
5800psi
-55°C to
150°C
10-20 mins
full cure 12hr
A471
A649
MIL-S-22473E
S72
50mls &
250mls
72 hr cure, Instant Low Pressure Pipe Sealant
White
20,000 CPS
0.4mm
6Nm/2Nm
Instant 100psi
full cure
5000psi
-55°C to
150°C
60 hours
N/A
MIL-S-22473E
S77 /
S77U
50mls &
250mls
High Strength Gas Pipe Sealant
Yellow
>50,000 CPS
0.05 to
0.4mm
>3-9N/mm2 to
>15N/mm2
Instant 100psi
full cure
5000psi
-55°C to
150°C
15 mins
full cure 12hr
A471
A649
AGA Approval # 6900
& AS 4623-2008
Certificate # 7604
49494
Dip Brush Can
113g
Thread Sealand with PTFE
White
paste
N/A
N/A
up to
10,000psi
-37°C to
287°C
N/A
N/A
N/A
6
RTV SILICONE (DYNATEX RANGE)
7
DYNA
BLUE RTV
SILICONE GASKET MAKER
DYNA
COPPER RTV
SILICONE GASKET MAKER: HIGH TEMP
Sensor safe, low odour, non-corrosive sealant manufactured to
meet OEM specifications. Will not leak and remains flexible. Resists
oil, water, anti-freeze, grease and transmission fluid. Temperature
resistant up to 500°F (260°C). Use to replace gaskets on valve
covers, oil pans, transmission pans, rear-end housings, water
pumps and timing chain covers.
Advanced formula instant gasketing material designed for late
model vehicles with elevated operating temperatures. Low odour,
sensor safe; non-corrosive and manufactured to exceed OEM
specifications. Highly flexible and will not leak. Temperature resistant
up to 700°F (371°C). Use on valve covers, transmission pans,
exhaust manifolds/headers, oil pans, thermostat housing and water
pumps.
DYNA
BLACK RTV
SILICONE GASKET MAKER
DYNA
GREY RTV
SILICONE GASKET MAKER
Excellent oil resistance, guaranteed not to leak. Leak proof
in the presence of oil, water and anti-freeze. Sensor safe and
manufactured to meet OEM specifications. Makes instant gaskets
for all engines. Temperature resistant up to 625°F (329°C). Use on
valve covers, oil pans, transmission pans, timing covers and intake
manifold end seals.
Formulated for import cars. Use to replace most gaskets. High
temperature, sensor safe, low odour and non-corrosive. Resists
water, oil and anti-freeze. Will not leak. Temperature resistant up
to 625°F (329°C). Use on valve covers, oil pans, water pumps,
transmission pans, thermostat housings, timing covers and
intake manifold end seals.
RED
RTV
SILICONE GASKET MAKER: HIGH TEMP
CLEAR
RTV
SILICONE ADHESIVE/SEALANT
Formulated to withstand higher operating temperatures. Sensor
safe and manufactured to meet OEM specifications. Resist
cracking and migration caused by thermal cycling. Will not leak.
Temperature resistant up to 650°F (343°C). Resist oil, water,
anti-freeze and transmission fluid.
Provides transparent, watertight silicone rubber seal for a wide
range of applications. Bonds and seals metal, plastics, glass,
fabric, vinyl, wood and rubber. Use on windshields, sunroofs, tail
lights, interior panels, fire walls and dashboards. Cures at room
temperature.
RTV SILICONE (DYNATEX RANGE)
RTV
SILICONE SEALANT
INDUSTRIAL GRADE
General purpose high quality 100% RTV Silicone Sealant. Cures
at room temperature to a tough and flexible rubber. For caulking,
sealing, waterproofing and bonding. Seals and bonds terminals,
connectors, mounting fixtures, mechanical gaskets, glass, metal,
masonry, plastic, tile, rubber, wood & fabric. Part numbers 49280,
49281, and 49285 are manufactured to meet USDA approval.
RTV
SILICONE SEALANT
MARINE GRADE
Designed for use in marine applications. Silicone Sealant is used
for sealing windshields, doors, windows and wires, around steering
cables, depth finder wires, horn assemblies, gauges, marine
antenna bases, attaching screws, rail mounts and other locations
where hull has been penetrated. Resists shrinkage. Seals and
bonds metal, plastic, wood, glass, fibreglass, vinyl and fabric.
Cures at room temperature.
BLACK
& COPPER RTV
HIGH TEMPERATURE SILICONE
Endurasil™ RTV Silicone is one part, easy bag in can applied,
paste-like sealant that cures to form a high purity elastomer on
exposure to atmospheric moisture. No Primers or Accelerators
are needed. When cured, Endurasil resists most chemicals, high
temperatures and exhibits excellent mechanical properties in all
applications where a non-sag sealant of exceptional longevity
is required to bond glass, metals, ceramics, wood stone etc.
Endurasil™ eliminates leakage, reduces noise, absorbs
vibration, seals and bonds parts into a secure unit.
Where surfaces require only a single sided bond, it is possible
to treat the side not requiring adhesion with a release agent or
simply apply petroleum jelly or oil. When cured torque up the
parts to form a compressive seal. Operating temp -70ºC to
+225ºC constant, +300ºC intermittent.
Product
Available
Sizes
Product Description
Colour
Tak Free Time
Full Cure Time
Tensile
Strength
Temp Range
Agency Approvals
Dyna Black
108g &
312g
High Temperature Gasket Maker
Black
16-20 minutes
24 Hours
210 psi
-65°C to
329°C
ASTM D2240 ASTM D 412 ASTM D 746
Red RTV
108g &
312g
High Temperature Gasket Maker
Red
16-20 minutes
24 Hours
350 psi
-35°C to
343°C
ASTM D2240 ASTM D 412 ASTM D 746
Dyna Copper
108g &
312g
High Temperature Gasket Maker
Copper
16-20 minutes
24 Hours
210 psi
-65°C to
371°C
ASTM D2240 ASTM D 412 ASTM D 746
Dyna Grey
108g &
312g
High Temperature Gasket Maker
Grey
16-20 minutes
24 Hours
210 psi
-65°C to
329°C
ASTM D2240 ASTM D 412 ASTM D 746
Clear RTV
108g
Watertight Silicone Rubber Seal
Clear
10-20 minutes
24 Hours
350 psi
-35°C to
268°C
ASTM D2240 ASTM D 412 ASTM D 746
Industrial Grade
312g
General Purpose
Black
10-20 minutes
24 Hours
350 psi
-62°C to
250°C
ASTM D2240 ASTM D 412 ASTM D 746
FDA Status & USDA Status
Marine Grade
312g
Marine Grade Sealant
White
10-20 minutes
24 Hours
350 psi
-30°C to
268°C
ASTM D2240 ASTM D 412 ASTM D 746
Black &
Copper RTV
200g
Paste like one part, easy bag in can Silicone
Black &
Copper
10-20 minutes
24 Hours
N/A
-35°C to
260°C
ASTM D2240 ASTM D 412 ASTM D 746
8
INSTANT BONDING
CA01
SURE SET 60
Bonds most plastics, rubbers, metals, woods, cork, etc.
CA01 is High viscosity ethyl based superglue for bonding where
gap fill is important, or where the materials are absorbent. CA01 is
versatile and will bond most plastics, rubbers and metals. Because
of its viscosity CA01 allows additional bonding time prior to cure.
Typical applications are ferrite cores, magnets, loud speaker cones,
leather trims, metal badges, and electronic components; however
will also bond cork, wood, ceramic, plastics etc. Only apply
adhesive to one side. Apply pressure firmly for a few seconds
until the bond forms. Allow to cure before putting into use.
Bonds neoprene, natural rubbers, metals, copper, etc.
Sure Set 60, when compared to other Low Viscosity Cyanoacrylates,
outperforms most products for cure speed, final cured strength
and simply the wide range of difficult plastics and elastomers it can
bond. For example, Nitrile, Neoprene and natural rubbers, plastics
such as ABS, soft PVC, Polyacetal, EPT and EVA can be bonded in
1-2 seconds and all the bonds are stronger than the material being
bonded. Metals such as Steel, Aluminium, Copper and Brass all
bond in under 5 seconds and the bond strengths are superior to
other manufacturers low viscosity products. Slower cures of up to
12 seconds are found on Polymethyl Methacrylate (PMMA), Bakelite,
Polycarbonate and Viton™ rubber. Polyolefin’s can be treated with
special preparations.
HIGH VISCOSITY
CA24
LOW VISCOSITY
LOW VISCOSITY
SURFACE INSENSITIVE
Bonds elastomers, plastics, metals inc. electronic applications, etc.
CA24 is Modified Ethyl superglue which was specially developed
for fast bonding of materials such as EPDM and difficult to bond
elastomers. It is low viscosity superglue of 20cps. Speed cure is
fast, usually in 2-7 seconds, depending on the type of material
being bonded. Applications vary, but mostly elastomer and plastics
applications. Due to its rapid cure, CA24 is ideal for fast repetitive
on line applications, such as in electronics, plastic components
assembly and rubber to metal bonds.
JET SET 41
™
HYBRID
SURFACE INSENSITIVE
Bonds woods, paper cardboard, furniture, etc. Ideal for hobbyists.
Jet SetTM 41 is a Hybrid quality Cyanoacrylates which is surface
insensitive and bonds to a wide variety of materials including wood,
paper, cardboard, leather, fabrics etc. Bond times vary according
to the substrates but are generally faster than normal superglues.
Typical applications include wood trim on furniture, balsa wood
bonding for hobbyists, leather accessories on shoes, fabric bows
on shoes and lampshade bonding. Other features include versatile
bonding or most elastomers, metals and plastics. On elastomer
bonding and some plastics, residues or release agents on surfaces
should be removed by solvent wipe.
GEL SET 44
SPECTAK 80 BLACK
™
™
PASTE - NON DRIP
Bonds leather, woods, metals, rubbers, plastics, etc
Gel Set™ 44 is a thixotropic Gel or Paste-like superglue. It is a
non-drip formulation and will not run on vertical surfaces. It is fast
to set on difficult surfaces such as leather, acetic substrates and
excellent for wood bonding, metals, rubbers, plastics etc. Where
vertical surfaces with large gaps (up to 1mm with activator, 0.2mm
with out) are being bonded, Gel Set™ 44 Stays in place. When
a fast cure is needed, our A021 or the faster A113 Activators will
help cure the thickness and speed cure the adhesive, however,
a reduction in ultimate bond strength will be found.
HIGH SHOCK AND
PEEL RESISTANCE
Bonds rubbers, metals, etc.
Spectak™ 80 is a Black modified, tough Cyanoacrylate with higher
peel and shock resistance to other grades. Variety of bonding
applications including, bonding rubbers and metals, but also acting
as a strain relief in tough demanding environments. Spectak™ 80
is designed for use with Activator A113 to cure through gaps and
large deposits or drop such as bridging and tacking/strain relief of
components.
Product
Available
Sizes
Product Description
Colour
Approximate
Viscosity (cP)
Maximum
Gap Fill
Tensile
Strength
Temp Range
Fixture
Time (Secs)
Primers
Activators
Agency Approvals
CA01
25g
High Viscosity
Clear
1500
0.12mm
320daN/cm(2)
-50°C to 90°C
15
A701
A113
MIL-S-A46050C
ASTM D-53283
CA24
25g
Low Viscosity
Clear
20
0.1mm
320daN/cm(2)
-60°C to 80°C
<7
A701
A113
MIL-S-A46050C
ASTM D-53283
CA41
25g
Surface Insensitive
Clear
120
0.1mm
20N/mm(2)
-60°C to 80°C
<10
A701
A113
MIL-S-A46050C
ASTM D-53283
CA44
20g, 300g
Surface Insensitive Thrixoptropic paste
Clear
Thixo Gel
0.25mm
25N/mm(2)
-50°C to 120°C
<30
A701
A113
MIL-S-A46050C
ASTM D-53283
CA60
25g/50g
Low Viscosity Surface Insensitive
Clear
20
0.1mm
20-30N/mm(2)
-60°C to 90°C
<5
A701
A113
MIL-S-A46050C
ASTM D-53283
CA80
25g
Rubber Toughened, High Shock & Peel Resistance
Black
>1000
0.2mm
25N/mm(2)
-50°C to 90°C
<60
A701
A113
MIL-S-A46050C
ASTM D-53283
9
EPOXY
ADV5
5 MINUTE EPOXY
FAST SET GENERAL PURPOSE
A fast clear curing, two part epoxy adhesive packed in an easy
to use double syringe dispenser containing 25ml of adhesive.
The correct ratio of hardener and resin is guaranteed on each
application. Epoxy contains a specially formulated epoxide resin/
hardener system designed to provide rapid setting and strength
development when mixed, unlike araldite it sets hard but workable.
Epoxy is an effective adhesive for wood, metals, ceramic, fibreglass
and most plastics. Typical applications include repairs and
renovation of metal castings, ceramic tiles, vessels or ornaments,
wooden, metal or plastic furniture, stone or concrete paving slabs or
copings. Epoxy is particularly useful for securing household fittings
to brick, plaster, wooden or plastic surfaces, laminating melamine
surface sheet to wood or block board, modelling and test rig
manufacture.
Epoxy is an ideal adhesive for most plastics but is not suitable for
polythene, polypropylene or plasticised PVC. If in doubt, carry out a
small trial with the adhesive before using on a large application.
WILSTIK
™ EPOXY PUTTY
AQUA STICK
Aqua Stick is a hand kneadable, speciality Epoxy Putty that mixes
in one minute to provide fast, permanent repairs to damp, wet areas
and underwater applications. It may be applied underwater, in either
fresh or salt water and will bond tenaciously to substrates such as
fibreglass, metal, wood, concrete, ceramics, glass etc. The mixed
Epoxy turns from an aquamarine colour to “fibreglass white” upon
curing and will not yellow upon exposure to UV light. After final cure,
Aqua Stick may be drilled, sawed, tapped, filed, sanded and painted.
It allows patching in areas where welding is impossible.
WILSTIK
™ EPOXY PUTTY
WILSTIK
™ EPOXY PUTTY
WILSTIK
™ EPOXY PUTTY
FAST PLASTIC STICK
Fast Plastic Stick is a hand kneadable, speciality Epoxy Putty that
mixes in one minute to provide fast, permanent repairs to most
plastic surfaces. After 15-20 minutes the Epoxy will harden like
metal and start to form a tenacious bond. After just 45 minutes
Wilstik™ is completely cured and can be drilled, sawed, carved,
sanded, stained or painted.
WILSTIK
™ EPOXY PUTTY
STEEL STICK
Steel Stick is a hand kneadable, non rusting, steel reinforced Epoxy
Putty that mixes in one minute to provide fast, permanent repairs to
items made of ferrous and aluminium metals. It comes in a handy
rod form with the curing agent encapsulated in the contrasting
colour base material. After 15-20 minutes the Epoxy will harden
like metal and start to form a tenacious bond. After just 45 minutes
Wilstik™ is completely cured and can be drilled, sawed, carved,
sanded, stained or painted.
COPPER STICK
EMPOX
Copper Stick is a hand kneadable, copper
reinforced Epoxy Putty that mixes in one minute
to provide fast, permanent repairs to pipes, tanks
and vessels made of copper, brass, bronze and
other non-ferrous metals. After proper mixing,
Copper Stick moulds like clay to fill in and
surround leaks in the most intricate openings and
breaks in pipes, elbow joints, sleeves, sink traps,
drains, water heaters, water tanks etc. It is ideal
for sealing freeze breaks and pin-hole leaks
and will seal high pressure hot water
lines permanently.
Product
ALUMINIUM STICK
Aluminium Stick is a hand kneadable, speciality Epoxy Putty that
mixes in one minute to provide fast, permanent repairs to most
Aluminium surfaces. It comes in a handy rod form with the curing
agent encapsulated in the contrasting colour base material. Its
putty-like consistency eliminates drips and runs, providing “no
mess” application with no tools required to use. The mixed epoxy
turns from a silvery colour to “Alloy” upon curing and will not
yellow upon exposure to UV light. After just 45 minutes Wilstik™
is completely cured and can be drilled, sawed, carved, sanded,
stained or painted. It allows patching in areas where welding is
impossible.
METAL EPOXY
FAST CURE
Holdtite Australia Empox is a two component metal filled
epoxy that cures at room temperature to form an ultra
hard thermostat polymer. Empox has a fast cure system,
allowing a 4 to 6 minute setting time (At 20°C), and when
mixed forms a non-slump repair paste.
Some typical uses of Empox are:
• Re-building threads (can be drilled and tapped);
• Repairing worn shafts and keyways;
• Filling cracked castings.
Available Sizes
Product Description
Colour
Temp Range
Lap Shear
Strength
Fixture Time
Full Cure Time
ADV5
25ml & 50ml
5 Minute Epoxy General Purpose
Amber
-40°C to 93°C
17N/mm2
5 minutes
8 hours
WILSTIK AQUA
180mm x 20mm
Epoxy Putty
Aqua
120°C
4.8N/mm2
1 hour
24 hours
WILSTIK COPPER
180mm x 20mm
Epoxy Putty
Copper
120°C
6.2N/mm2
1 hour
24 hours
WILSTIK ALUMINIUM
180mm x 20mm
Epoxy Putty
Grey
120°C
4.8N/mm2
1 hour
24 hours
WILSTIK FAST PLASTIC
180mm x 20mm
Epoxy Putty
Blue
120°C
4.8N/mm2
1 hour
24 hours
WILSTIK STEEL
180mm x 20mm
Epoxy Putty
120°C
6.2N/mm2
1 hour
24 hours
EMPOX
25ml
Metal Epoxy
6-15 minutes
72 hours
Grey
White
Black
-50°C to 80°C
10
STRUCTURAL BONDING
METHACRYLATE
M5020 / M5060
Metha
Methacrylate
is a two part A&B component system, which is fast
setting when mixed via a static mix nozzle at room temperatures.
settin
Because it is a high viscosity non-sag material, the mixed material
Becau
is ideal
ide for all types of gap filling requirements on steel, aluminium,
polycarbonates and general plastics. It is also very good on vertical
polyc
surface bond. Methacrylate exhibits excellent structural strength
surfac
even without priming the surfaces. Because of its macro structure
formed show excellent durability high peel strength even
the bonds
bo
in big gaps and excellent solvent and environmental resistance,
resisting fuels, lubricants cleaning chemicals and fluids.
resist
ST3295
RUBBER TOUGHENED ACRYLIC
HIGH SHEAR & TEMPERATURE RESISTANCE
ST3295 is a second generation acrylic adhesive designed
to combine the high shear and temperature resistance of a
conventional acrylic with the qualities of a rubber toughened
adhesive where high Peel and Impact Strength are a feature.
ST3295 bonds to a wide variety of materials such as Metals,
Glass, Epoxy, Unsaturated Polyesters, GRP, Bakelite etc, ST3295
is supplied in our EMR (Equal Mix Ratio) system syringe or
cartridge and is produced in various other forms of packaging.
ST3295 can be applied from bottles 1:1 ratio and the cure time
can be adjusted by variation of the ratio (3.2 max) without
affecting the bond strengths after full cure. ST3295 is suitable
for paint bake cycling to +180°C for typical coatings etc. Normal
Acrylic operating limits recommended for continuous temperature
exposure is -50°C to +130°C.
TYPICAL USAGES OF METHACRYLATE
Structural joining of metals, plastics, composite bonding and on
ceramics where high impact strengths are needed. Applications
include wind turbine, vehicle roofs, fibreglass, sports goods,
automotive spoilers, vents, housings.
HANDLING STRENGTH
M5020
M5060
7-10 min
60-80 min
TYPICAL CURED PROPERTIES
Tensile Strength :
Hardness:
Average shrinkage:
ASTM D1002
On steel/steel:
On aluminium as received:
On polycarbonates:
On nylon:
Impact Strength:
Average 3500 psi
approx. 75shore
< 5%
Lap shears
4150 (Psi)
3500 (Psi)
2500 (Psi)
200 (Psi)
> 20 KJ/M2
Product
Available
Sizes
Product Description
Colour
Approx Viscosity
(cP)
Max Gap
Fill
Tensile
Strength
Cure Time
Temp
Range
Fixture Time
Primers Activators
ST3295
25ml & 50ml
2 Part Toughened Acylic
Pink
Green
3500 to -500CPS
0.1mm
16-35Nm
Full Cure
24 Hours
-40°C to
+180°C
2-7 minutes
Isopropyl Alcohol
M5020
25ml, 50ml &
400ml
Methacrylate
Yellow
Clear
120000 150000 CPS
4.5mm
16-30N/mm2
Full Cure
24 Hours
-40°C to
+120°C
12-15 minutes
Isopropyl Alcohol
M5020B
25ml
Methacrylate
Black
120000 150000 CPS
4.5mm
16-30N/mm2
Full Cure
24 Hours
-40°C to
+120°C
12-15 minutes
Isopropyl Alcohol
5030
50ml & 400ml
Methacrylate
Yellow
Clear
136000 168000 CPS
5mm
16-30N/mm2
Full Cure
24 Hours
-40°C to
+120°C
20-30 minutes
Isopropyl Alcohol
M5060
400ml
Slow Set Methacrylate
Yellow
Clear
136000 168000 CPS
5mm
16-30N/mm2
Full Cure
24 Hours
-40°C to
+120°C
55-62 minutes
Isopropyl Alcohol
11
POLYURETHANE
ALPHA DP2246
Fast curing one part general purpose Polyurethane adhesive and
sealant with a cured Shore A hardness of 40 to 45. Resistant to oil,
sea water and extremes of heat and cold with good adhesion to a
wide range of substrates.
Typical applications include:
•
•
•
•
•
•
bolted lap joints,
cover plates,
bedding in railings,
joint sealing between hulls and superstructures,
sealing duct joints and metal seams,
adhesion to light weight metal panels, glass and GRP.
Stays permanently elastic when cured to accept movement caused
by expansion, contraction, shocks and vibration.Paintable when
cured. Available in black, white and grey.
ALPHASEAL 128
Neutral curing Direct Glazing Polyurethane, which is also widely
used for windscreen replacement in the automotive and transport
aftermarket. When cured, the Alphaseal 128 forms a flexible
adhesive with high tensile strength and a Shore A hardness
when cured of 55. Used in conjunction with T163 degreaser and
Primer 2. Supplied in 310mm cartridges in black. Drive away time
is between 4 and 6 hours.
ALPHASEAL 132
High Quality Polyurethane adhesive and sealant with a Shore A
hardness of 50. Suitable for use on a wide range of substrates to
include metals, glass, wood, GRP, anodised Aluminium, polyester
and concrete. Available in black or white. Paintable when cured.
Typical applications include joint sealing, gap filling and bonding in:
• boat and ship building - decks, floors, panels;
• transport industry - car body assembly, buses,
containers, horse boxes;
• Construction and building;
• Metal construction – bonding and mounting of vibrating parts.
ALPHASEAL 133
Similar to Alphaseal 132 but with a Shore A hardness of 55. Mainly
used for bonding and sealing glass, ceramics, concrete, wood,
aluminium, polyester and most lacquered metals.
Typical applications include: Panel bonding in vehicles. Sealing
and bonding panels for refrigeration rooms and trailers. Bonding
and sealing air conditioning and ventilation units. Sealing shipping
containers. Bonding and sealing concrete panels. Available in black,
white or grey and paintable when cured.
Product
Available
Sizes
DP2246
310ml
Fast Curing Structural & Marine
128
310ml
Windscreen/direct, glass/sealant Neutral Cure
Product Description
Colour
Black White
Grey
Black
Elongation
Max
Gap Fill
Shore
Hardness
>600%
2-10mm
40-45
-30°C to 90°C
3mm per 24 hours
>700%
2-10mm
>55
-30°C to 90°C
>3.5mm per 24 hours
Service Temp
Cure Time
132
310ml
Structural & Marine
Black White
Grey
>400%
2-10mm
50
-30°C to 90°C
4mm per 24 hours
133
310ml
Structural & Marine
Black White
Grey
>300%
2-10mm
55
-30°C to 90°C
4mm per 24 hours
12
LUBRICANTS/ANTISEIZE/HANDCLEANERS
SILVER GRADE GRAPHITE ANTISEIZE
POWERCAN 200g & BRUSH TOP DIP CAN 500g
Aluminium Antiseize is a general-purpose smooth, silvery
coloured, active lubricant, and anti-corrosion compound.
•
•
•
•
Protects against rust and corrosion
Protects up to 980ºC
Prevents seizing and galving of metals
Protects against harsh and corrosive environments
Years of protection are afforded to suitability coated parts resisting
temperature extremes, harsh and corrosive environments enabling
“ease” of disassembly in unexpectedly difficult applications.
NICKEL GRAPHITE ANTISEIZE
NUCLEAR GRADE THREAD PROTECTION
POWERCAN 200g & BRUSH TOP DIP CAN 500g
Nickel Anti-Seize is a highly modified thread and moving part
lubricant that resists high temperatures (up to 1315ºC) and prevents
corrosion in the parts.
•
•
•
•
•
•
Lube for treaded parts such as valve seatings
Fork lift chain guard and lube
Rust preventative on any assembly
Boiler hinges and door latches
Prevents seizure on aero jets, turbines etc
Protects threads, gears, pulleys, chains, rollers, cables, hinges,
pivots, sprockets, oven doors, exhaust manifold parts, flues, and
assemblies etc.
Nickel Anti-Seize prevents corrosion in adverse conditions such as
high and low temperatures and extremes of surrounding conditions
such as rain, water jets, salt spray, salt water immersion etc.
DYNATEX HAND CLEANER
Dynatex Hand Cleaner is a precisely
formulated blend of surfactants,
emulsifiers, and skin conditioners.
Dynatex balanced mixture provides
optimum cleaning potential for your hands
without harshness or irritability. Removes
grease, stains, paint, tars, printer’s ink,
fish odors, etc. Dynatex All Purpose Hand
Cleaner with lanolin is a creamy formula
that liquefies and gently lifts grease,
grime and stains from the hands safely
with or without water. Dynatex All Purpose
Hand Cleaner leaves hands cleaned and
conditioned without the greasy feeling
and strong odors of competitive brands.
Dynatex All Purpose Hand Cleaner
contains lanolin and skin care emollients
to aid in healing rough, dry and
overused hands.
DYNATEX SUPER SCRUBS
Industrial wipes that clean paint, adhesives, oil and grease
from hands, tools and surfaces. 100 big wipes (20cm x 30cm), for
use on:
• PAINT - oil and water based. Effective up to 24 hours after
application. To assist dry paint removal place wipe on spill to
soften paint.
• ADHESIVES & SEALANTS - silicone, acrylic, fillers, poly
adhesives, poly foam, epoxy, rubber cement and label residue.
• OIL BASED STAINS - oil, grease, ink and many more.
COPPER GRAPHITE ANTISEIZE
POWERCAN 200g & BRUSH TOP DIP CAN 500g
A high lubricated grease which contains copper particles in a mixture
of other fillers and surface activates. The grease is a clean burning
leaving no carbon residue. Mostly designed to prevent thread
seizure and give high water repellence
epellence
used also on brake callipers tto
o ease
disassembly or prevent “welding”
d
ding”
due to excessive temperatures.
e
es.
Other uses include: nuts, bolts,
t
ts,
pipe work, keys, keyways, track
a
ack
adjusters, chains, rock, drills,,
extension rods, anywhere metal
e to
etal
metal contact needs to be avoided
vo
oided
due to possible seizure on
contact at elevated
temperatures.
• GENERAL CLEANING - Ideal for stain and grease removal
from most work surfaces. Will refresh and clean old paint and
sealants.
Why do you need them?
•
•
•
•
Ideal for workshop, office, home or on the move;
No need for lots of cleaners;
No need for soap and water;
One wipe does all.
Product Description
Colour
Approximate
Viscosity (cP)
200g & 500g Screw Top Brush Can
General Purpose Active Lubricant & Anti Corrosion Compound
Grey
200g & 500g Screw Top Brush Can
High Temperature Highly modifoed thread & Moving part lubricant
Grey
Product
Available Sizes
Aluminium Antisieze
Nickel Antiseize
Copper Antiseize
200g & 500g Screw Top Brush Can
A High temp lubricating Grease Contains Copper
Copper
Thick self cling paste
-54°C to 982°C
MIL-L-907D
Foodsafe
200g
Premium Grease for Food Processing enviroments
Off White
Thick self cling paste
-20°C to 120°C
FAD Guidence with USDA
13
Temp Range
Agency Approvals
Thick self cling paste
-60°C to 980°C
MIL-L-907D
Thick self cling paste
-50°C to 1315°C
MIL-L-907D
SURFACE PREPARATION
A471
ACTIVATOR PRIMER
FOR ANAEROBICS (200ML)
Speeds Cure of all Anaerobic fluids and pastes and extends cure
through volume. A471 helps fixture time and reduces ultimate cure
time. Use when materials are inactive, passive or inert, or where
temperature is under 15ºC.
A701
PRIMER FOR POLLYOLEFINS /
CYANOACRYLATES (50ML)
Command Cure Primer is a new surface modifier overcoming the
difficulties often experienced with exotic plastics, thermoplastics,
elastomers, olefins and silicones. Curing on demand, command
cure will overcome the most difficult low energy surfaces. It is
simple to apply and can be brushed or sprayed onto clean surfaces.
Applications include:
A649
ACTIVATOR FOR
ANAEROBICS (50ML)
Activator A649 must be used with each of the grades mentioned as
it is an essential part B of the cure system of each of the specified
products. Apply adhesive to either one or both sides (for faster cure)
and adhesive to one side once the Activator has dried and make the
bond immediately without allowing movement during fixture time.
•
•
•
•
•
•
•
•
Silicone cord, sheet, profiles, moulded parts
Santoprene Cord, sheet, profiles, moulded parts
E.P.D.M Elastomers, Sheet, profiles
Exotic Plastics, suryn, etc
Polyolefins (Teflon’s)
Polypropylen/blends (PP)
Polyethylene/blends (PE)
Polytetrafuoryl Ethylene (acceptable).
A113
POST ASSEMBLY
ACTIVATOR ACCELERATOR (200ML)
Accelerator is used for the fast curing of Cyanoacrylates, depositing
a correct balance of neutralising ions on the surface, stimulating
attraction for the adhesive and preparing the surface for bonding.
Excellerator© prevents absorption of the lower viscosity superglues
into porous items. Excellerator© helps bridge gaps which decreases
polymerisation time.
GASKET REMOVER
Dynatex Gasket Remover is an aerosol product designed to remove
gasket residue from any type of metal or plastic housing. Dynatex
Gasket Remover quickly removes baked-on gaskets, silicone
weather-strip adhesive, carbon deposits, dried oil, adhesives, grease
and paint. Removes gaskets in 10-12 minutes. Prepares metal parts
for new gasket installation.
Product
Available Sizes
Product Description
Colour
Form
Evaporation Time
A471
200ml
Primer Anaerobic Activator
N/A
Aerosol
60 Seconds
A649
50ml
Structural Activator for Anaerobics
N/A
Liquid Pump
30-60 Seconds
A701
50ml
Primer for Polyfins / Cyanoacrylates
Clear
Liquid Pump
<30 seconds
A113
200ml
Excellerator for Surface & Speed Cure for Cyanoacrylates
Off White/Amber
Aerosol
<10 Seconds
14
STANDARDS, QUALITY & SPECIFICATIONS
The products manufactured at Holdtite, Dynatex and Alpha are
produced under a quality system meeting internationally recognised
standards. Full traceability is available for each part of the process
ensuring total uniformity.
Test methods employed and the equipment used in our materials
evaluation and testing laboratory meet relevant standards where
necessary. We also employ the services of outside bodies and test
centres, utilising the most recent test methods and standards.
Certain Holdtite Australia products also meet special test approval
criteria such as USP class IV United States Pharmacopeia, WRC
water boards for CA’s and specific pipe sealants for gas approval.
The following table briefly outlines various relevant testing methods
for our product range.
ANAEROBICS IN CURED STATE
Test Methods
Determination
Type of Application
MIL Spec 22473E
Strength Achievement
Sealing, Locking, Retaining
MIL Spec 46082B
Shear Strength
Retaining Compounds Type 1, 2 & 3
MIL Spec 46163A
Strength Achievement
Threadlockers Self Lube / Wicking
DIN Standard 54454
Strength Breaking/Prevailing
All Securing Compounds
ISO Standard 10964
Strength Breaking/Prevailing
Anaerobics
Pren. 10964 (Draft)
Determination Torque
Threaded Parts on Fasteners
Din Standard 54452
Shear Static Push Out
Securing Compounds
ISO Standard 10123
Shear Static Push Out
Securing Compounds
CYANOACRYLATES AND STRUCTURAL BONDING OF CURED PRODUCT
15
Test Methods
Determination
Type of Application
MIL Spec A46050C
Classification Into Types
Cyanoacrylates / Esters Groups
ASTM D1002 Shear
Strength (Lapshears)
Cyanoacrylates & Structurals
DIN 53283
Shear (Overlapped Parts)
Cyanoacrylates & Structurals
DEF Standard 80746/1
Properties Cured
Cyanoacrylates
DIN 53288
Tensile Strength Structural
Anaerobics / Cyanoacrylates
WRC1 ORIGINAL
STANDARDS, QUALITY & SPECIFICATIONS
16
ANAEROBICS FAQ’S
17
Q:
A:
How do Anaerobics adhesives work?
The cure mechanism is instigated by two factors:
1. The absence of oxygen
2. The presence of metal ions
These two conditions mean that Anaerobics will cure when confined within the threads of assembled threaded components or
between close fitting metal surfaces. The rate/speed at which the adhesive cures can be controlled to suit particular needs, either
through the choice of a specific Anaerobic product or through the use of an activator. Heat will also speed up the cure time.
Q:
A:
Why would I need an Activator?
When using an Anaerobic on inactive metals (see below), or between metal and non-metallic substrate, an activator can be used
to aid curing. Some Anaerobics however are specifically designed for use on an inactive surface such as stainless steel, without
the use of an activator. (See technical data sheet on each material).
Active Materials
Iron, Mild Steel, Nickel, Copper, Manganese, Bronze, Commercial Aluminium, Brass
Passive Materials
Plated Parts, Anodised Aluminium, Titanium, Stainless Steel, Galvanised Steel, Zinc, Pure Aluminium, Cadmium, Magnesium,
Magnetite Steel, Natural or Chemical Black Oxide.
Use on plastics
When bonding metal to plastic parts, an activator should be used. However, some Anaerobics will stress crack plastics so it is
advisable to test before use or seek advice from our sales staff.
Q:
A:
Why are the bottles not full?
To prevent the Anaerobic adhesive from curing in the bottle, the bottle must contain a similar volume of air. Therefore 50ml of
anaerobic will be filled into a 100ml bottle, giving it the appearance of being half full.
Q:
A:
What do I use to remove an Anaerobic?
Anaerobics can generally be removed by heat or organic solvents. However chlorinated solvents are the most widely used.
Q:
A:
How do I disassemble bonded parts?
Certain Anaerobic products are designed with the intention of disassembly, allowing conventional hand tools can be used.
Whereas more permanent strength Anaerobics require the use of heat is to aid disassembly.
Q:
A:
Do the colours used in Anaerobics mean anything?
Yes. As Anaerobics can permanently lock a joint, it is important that the right anaerobic is chosen for a particular job, so colours
are traditionally used to aid identification on the shop floor. Red indicates high strength (e.g. Studlock) Blue for medium strength
(Nutlock), and Purple is used for low strength bonds (Screwlock). Orange is used to identify a removable product (Gasket Maker).
Other colours are used to indicate a different function such as Green for Retainers. Some Retainers reach “Ultimate Strength”
which is the highest strength band achievable with an Anaerobic.
Q:
A:
What happens if Anaerobic gets inside my fluid system? Will it cure?
Usually Anaerobics are designed with the ability to be flushed from a system without clogging valves or pathways.
This is supported by the partially miscible towards many fluids that Anaerobics posses.
Q:
A:
Are the Anaerobics stable within different engineering systems?
The 900 series are created to be used particularly within the engineering sector. This means they are often designed to be
resistant to a wide range of gases, fluids and environments.
Q:
A:
Are Anaerobics toxic or harmful in use?
Generally Anaerobics are not toxic. However, they do contain acids which can cause skin sensitivity in some instances. The
Holdtite 900 series has been formulated with far lower acid levels to minimise this problem. Certain Anaerobics (see Holdtite 900
Series) are approved by THE WATER RESEARCH COUNCIL WRAS>NSF for use on potable drinking water, and can therefore be
used in applications near food. (Basically when an anaerobic has solidified it is an inert plastic and does not impart taste or smell).
Q:
A:
Where can I get further information about these products?
Our Sales staff are highly trained and extremely well experienced, and over the years has come across all manner of different
problems and scenarios. Please contact the sales department for answers to other more specific questions that do not appear
on this sheet.
Q:
A:
Are they flammable?
No, as the products do not contain any solvent, in addition to the physical composition of the products, they are not regarded
as flammable.
Q:
A:
What is the shelf life?
The self life is normally 12/24 months unless stated otherwise.
Q:
A:
How should they be stored?
In cool conditions out of direct sunlight.
Q:
A:
What is the typical application of an anaerobic adhesive?
The applications of Anaerobic vary a great deal, the general use of which consists of the assembly and securing of metallic
components.
Q:
A:
Where can I buy Holdtite Australia Adhesives anaerobic range?
You can visit our website for information on the location and contact details of our distributors. Alternatively you can contact our
sales team on 1300 552 680 to discuss or place an order.
COMPARISON CHART
HOLDTITE GRADE
OTHER PRODUCT
REFERENCE
AVAILABLE SIZES
DESCRIPTION
3222
3243
3262
3272
3277
3290
/
/
/
/
/
/
10ml, 50ml, 250ml
10ml, 50ml, 250ml
2ml, 10ml, 50ml, 250ml
10ml, 50ml, 250ml
10ml, 50ml, 250ml
10ml, 50ml, 250ml
SCREWLOK Low strength for easy disassembly
NUTLOK Medium strength (oil tolerant)
STUDLOK Medium strength, lubricated for torque assembly
STUDLOK High strength, high temperature rated up to 232°C
STUDLOK High strength for bolts 25mm and above
PENETRATOR Wicking grade for close fitting parts
3541
609
3660
3620
3680
/ 641 / 7641
10ml,
10ml,
50ml,
10ml,
10ml,
BEARING FIT Medium strength allowing disassembly
RETAINER Mild strength, low viscosity
METAL FILL To repair and fill worn cylindrical parts
RETAINER High temperature rated up to 232°C
RETAINER High strength for dynamic loading
THREADLOCKING
T22
T43
T62
T72
T77
T90
222
243
262
272
277
290
/
/
/
/
/
/
7222
7243
7262
7272
7277
7290
RETAINERS
R41
R69
R60
R62
R68
/ 660 / 7660
/ 620 / 7620
/ 680 / 7680
50ml, 250ml
50ml, 250ml
250ml
50ml, 250ml
50ml, 250ml
GASKETING
G51
G55
G58
GHYB-100
XS10 / 510 / 7510
XS15 / 515
XS18 / 518 / 7518
Hylomar
50ml, 250ml
50ml, 250ml
6ml, 50ml, 250ml
100ml
DURAFORM High temperature up to 200°C
DESIGNER GASKET Form in place, low viscosity
DURAFORM SPECIAL GASKET Form in place, high viscosity
HYPERSEAL BLUE Automotive, non-hardening gasket
XS67 / 567 / 7567
3569 / 569 / 7569
18-10 / 572
XS77 / 577 / 7577 / 58-11
6ml, 50ml, 250ml
50ml, 250ml
50ml, 250ml
50ml, 250ml
PIPESEAL WITH TEFLON 24 hour cure time
SPECIAL HYDRAULIC High strength seal on fine threads
PIPESEAL WITH TEFLON Long cure time allowing realignment
GASTITE PIPESEAL Water, oil, gas AGA certificate no:6900
416
424
CA401
CA454
CA406
CA408
25g
25g
25g
20g, 300g
25g
25g
CA01 SUPERGLUE Plastic, rubber, leather, wood etc
CA24 SUPERGLUE Elastomers, plastics, fast cure 1-7 seconds
JET SET 41 Wood, paper, leather, fabrics, rubber
GEL SET 44 Thick non-drip formula
SURE SET 60 Most plastics, steel aluminum, 1-5 seconds
SPECTAK 80 Black, high peel and shock resistant
LT3295
NA
NA
25ml
25ml, 50ml, 400ml
400ml
TOUGHENED ACRYLIC Pink and Green
METHACRYLATE Fast cure, Opaque and Black
METHACRYLATE Medium and slow cure
NA
Metal Epoxy
NA
25ml, 50ml
25ml
180mm L x 20mm D
5 MINUTE EPOXY
METAL EPOXY
EPOXY PUTTY Copper, Steel, Aluminium, Aqua and Plastic
THREADSEALING
S57
S69
S72
S77
INSTANT BONDING
CA01
CA24
CA41
CA44
CA60
CA80
/
/
/
/
401
454
406
480 / 2241
STRUCTURALS
ST3295 / M3295
M5020 / M5020B
M5060
EPOXY
ADV5
EMPOX
WILSTIK Kneadable
SILICONS RTV GASKET MAKER (DYNATEX RANGE)
Dyna Copper RTV
Red RTV
Dyna Black RTV
Dyna Grey RTV
Copper Maxx
High Temp Red
Black Maxx
Grey Maxx
108g,
108g,
108g,
108g,
300g
312g
312g
300g
Advanced formula instant gasket, Sensor Safe Temp to 371°C
Resists oil, anti-freeze, Transmission fluid Sensor Safe Temp to 343°C
Excellent oil resistance OEM spec Sensor Safe Temp to 329°C
For imported cars, Sensor Safe OEM spec Temp to 329°C
255
291
221,11FC
252
310ml
310ml
310ml
310ml
Black, Windscreen / Direct Glazing / Sealant Neutral Cure
Black, White, Structural and Marine
Grey, Black, White, Structural and Marine
Grey, Black, White, Structural and Marine
7471 (T) / 9190
7649
7701 / 770 / 9050
7113
790
200ml
50ml
50ml
200ml
369g
Activator / Primer for anaerobics
Activator / Accelerator for anaerobics
Primers for polyolefin’s / cyanoacrylates
Post assembly activator / Accelerator
Gasket Remover
NA
767
771
C5A
200g
500g
500g
500g
Aluminium, Nickel, Copper
Screw Top/Brush Silver Grade Graphite Antiseize
Screw Top/Brush Nickel Graphite Antiseize
Screw Top/Brush Copper Graphite Antiseize
POLYURETHANES
128
132
DP2246
133
SURFACE PREPARATION
A471
A649
A701
A113
Gasket Remover
LUBRICANTS
Power Can / Brush top
AA 500g
NA 500g
CA 500g
18
18
Holdtite’s sponsored record-breaking Superstock Pontiac
Mechanic
packs now
available!
Bonding Solutions
Holdtite Australia does not guarantee the availability of any products advertised in this Brochure. Holdtite Australia is not responsible for results obtained in the use
of the products by any person whose methods are beyond its control. It is your responsibility to determine the suitability of any of the products and methods of use
or preparation in this Brochure. It is also your responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property
in the handling and use of any Holdtite Australia products. In no event shall Holdtite Australia be liable to you or any third party under law for any loss or damage
(including but not limited to direct, indirect, economic and consequential damage) in respect of any matter whatsoever related to any information in this Brochure.