Linear Telescopic Lifting Columns

Linear telescopic
lifting columns
dynamic capacity up to 11 tons
(100 kN)
standard lift stroke up to 23 feet
(7 m), higher lift stroke available
high speed / high cycle systems
SERAPID lift systems provide a mechanical
When lowered, the links unlock, allowing it
way to elevate heavy loads. Just like the hori-
to remain flexible. The chain bends or coils
zontal motion systems, this is based on the
into a compact package.
locking and unlocking of flexibly connected,
linked elements. When lifting a load, the
specially shaped chain links interlock with
each other, forming a rigid bar or column.
Linear telescopic
lifting columns
The Rigid Chain combines the strengths of
other transfer methods, such as belts or spindle screws, and at the same time it does away
with their weaknesses. This is especially true
load capacities to 10 tons per lifting col-
in the case of vertical motion:
umn, stroke up to 23 ft (7 m) or more
maintains position with no drift
repeatable positioning in the millimeter
space-saving chain return storage
range, even at high speed
simple configuration, design flexibility
standard speed up to 9 ft/s (300 mm/s),
80% system efficiency
faster speeds available on request
long life and low maintenance
2
ChainLift: proven rigid-chain technology
The ChainLift standard model range
dyn / stat capacity [kN (lbf)]
ChainLift
The ChainLift was developed from our hori-
ChainLift 40
ChainLift 60
zontal push-pull chain. The links were rein-
7.5 (1700)
20 (4500)
forced with double plates, four driving rollers,
plus larger guide rollers, making the chain
max stroke [m (in)]
1 (40)
2 (80)
max speed [mm/s (ft/mn)]
200 (40)
200 (40)
capable of lifting. Additional stability is
achieved in the drive housing through a
pitch of link [mm]
40
60
segment radius of drive pinions [mm]
40
60
weight of chain [kg/m]
7.8
10.5
weight of drive housing [kg]
15
45
thicker and longer reaction plate. The lifting
force is applied through four driving pinions.
standard magazines: length [mm]
max stroke [mm] 500
396
1000
646
For requirements outside of our specifica688.5
tions, please contact us.
1188.5
ChainLift
2000
=J=
L
max stroke
=K=
I
G
B
F
H
N
D
E
C
O
max stroke
ChainLift 40
ChainLift 60
B
C
E
F
G
H
I
J
K
L
N
O
1000
255
202
168.2
25 101
59
146
100
100
40
40
120
2000
350
272
201.4
45 136
95
197.7
130
130
60
60
140
standard magazines, length (D)
max stroke
500
ChainLift 40, D =
ChainLift 60, D =
396
1000
2000
646
688.5 1188.5
3
HD Lift: strength and endurance
The systems in our heavy-duty line are design-
The diagram below shows the lifetime curves
ed for high operating cycles (> 10 cycles / h).
of our heay-duty lifts in relation to load. These
The guaranteed minimum lifetime is one mil-
curves are based on actual test data.
lion cycles under maximum load. All types include a permanent lubrication system, with
For requirements outside of our specifications,
oil-proof drive housing and chain magazine.
please contact us.
The product range includes five standard sys-
kN 50
tems, covering dynamic loads up to 11240 lbf
40
and strokes up to 8 feet.
30
20
HD Lift 90D
10
HD Lift 90S
HD Lift 60J
HD Lift 60
0
1.1
1.5
2.5
million
cycles
The HD Lift standard model range
dyn / stat capacity [kN (lbf)]
HD Lift 40
HD Lift 60
HD Lift 60J
HD Lift 90S
HD Lift 90D
6.5 (1450)
12.5 (2800)
25 (5600)
40 (9000)
50 (11200)
max stroke [m (in)]
1 (40)
1.5 (60)
1.5 (60)
2 (80)
2.5 (100)
max speed [mm/s (ft/mn)]
300 (60)
300 (60)
300 (60)
300 (60)
300 (60)
40
60
60
90
90
40
60
60
90
90
weight of chain [kg/m]
7.8
10.5
2 x 10.5
31
49
HD Lift 40 / HD Lift 60
=K=
=J=
=U=
=T=
W
max stroke
V
L
HD Lift
pitch of link [mm]
segment radius of drive pinions [mm]
I
B min
Q
G
=N=
M
F
R
H
S
=E=
=N=
D
=P=
=C=
=O=
max stroke B
All dimensions
in mm.
HD Lift 40
HD Lift 60
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
1000
230 202 1000 148.2 Ø25g6 101 60 145 100 100 40 40 120 184 170 86 10 100 70 70 26 8.5
1500
300 272 1500 180 Ø45g6 136 70 140 130 130 60 60 180 220 220 101 18 100 90 90 35 11
4
HD Lift
HD Lift 60J
60
1500 max
130
210.2
135
R60
111
135
180
70
135
300
200
ø60g6
250
60
100
1500 max.
135
135
340
180
HD Lift 90S
90
2000 max
200
300
200
151
150
400
142
500
277
150
R90
ø70g6
146.5
300
90
100
2000 max.
200
200
350
300
HD Lift 90D
90
2500 max
200
100
2500 max.
200
200
300
5
200
161
150
400
300
164
500
344
150
R90
ø100g6
234
380
90
438
LinkLift: the lifting chain
The LinkLift was specifically designed for
drive housing and interlock to form a rigid
heavy loads and significant heights. The block-
structural column. This creates a telescopic
shaped links, with square cross-sections, en-
lifting column with high strength and rigidity.
sure the center of gravity is right in the geo-
This is why the LinkLift has been patented in-
metric center. The links are aligned inside the
ternationally and won several awards.
The LinkLift standard model range
LinkLift 30
LinkLift 50 / 50 R
[lbf]
10
2250
20
4500
15 / 30
3350 / 6700
30
6700
35
7850
70
15700
max stroke [m (ft)]
1.9 (6.2)
3.0 (9.8)
5.0 (16.4)
7.0 (23)
nominal speed up to [mm/s (ft/mn)]
200 (40)
200 (40)
200 (40)
200 (40)
dynamic load capacity [kN]
[lbf]
static load capacity [kN]
LinkLift 80 LinkLift 100 / 100R
50 / 100
11200 / 22400
100
22400
system efficiency rate [%]
80
80
80
80
chain pitch [mm]
30
50
80
100
segment radius of pinions [mm]
30
50
80
100
minimum height [mm]
190
291
460
572
weight of chain [kg/m]
15
21 / 22
35
71 / 74
weight of drive housing [kg]
8
29 / 33
80
192 / 213
2.56: 83
standard magazines:
max stroke [m]: weight [kg]
1.9: 8
1.4: 19
2.2: 58
2.2: 29
3.54: 82
4.56: 132
3.0: 39
5.0: 97
5.58: 159
With the reinforced version LinkLift R, the
Longer strokes, higher speeds and special
maximum load and maximum stroke cannot
magazines on request.
be used together. If this is a requirement,
please contact us. Please also call for shaft
dimensions of R-versions.
LinkLift 30
8
190
180
170
2 x 6 M8
B
A
M10 x 20 2.5
2.5
30
135 33
1135
15
165
6
15
ø10 (M8)
4 x ø9 (M8)
ø70+0,3+0.1
0.5
R30
ø80
1122
62
119
134
115
56.5
4 x ø9 (M8)
79.4
=142=
=55=
2020
ø30g6
23.5
10
45
12
10
ø70+0.3+0.1
47
stroke: 1900 max.
30
100
3
LinkLift
7.0: 196
M10 x 20
LinkLift
LinkLift 50 / 50R
1650
65
15
130
78 28 12
70
4 x ø13 (M12)
2x6 M8
ø120
100
4
4
291
255
=118.4=
=175=
=80=
28 28
100
18
ø60g6
1250
825
ø45g6
ø100+0.3+0.1
625
< 3000
14
< 2200
B
A
177
M
840
15
P
420
ø100+0.3+0.1
stroke
< 1400
50
magazine sizes
LinkLift 50R
stroke: 3000 max.
LinkLift 50
M12 x 27 5
M16 x 32
R50
35
48.5
173
202
242
19
5
4 x ø12 (M12)
2 x ø14 (M10)
35
P
M
200
270
1000
2000
1365
2730
105
4 x ø18 (M16)
25
220
130 50 20
112
ø 220
2x6 M12
181
=290=
=120=
40 40
130
20
A
B
280
402
460
5
M12 x 27
ø200+0.3+0.1
< 3540
< 5000
13
60
74,5
M20 x 40
270
305
345
18
10
R80
4 x ø18 (M16)
2 x ø14 (M12)
P
52
M
ø70g6
M
1330
20
P
665
ø200+0.3+0.1
stroke
< 2200
80
magazine sizes
stroke: 5000 max
LinkLift 80
320
424
1490
1245
2490
< 5580
1500
3000
< 7000
1855
3710
130
4 x ø21 (M20)
30
280
160 60 30
140
ø250
2x 6 M16
229.4
=368=
=150=
55 55
500
572
6
P
75
65
200
200
530
M
7
22
6 x 18 (M16)
163
A
348
ø80g6
M12 x 27 15
R100
2 x ø14 (M12)
163
6
B
ø220+0.3+0.1
745
< 4560
22
< 2560
LinkLift 100R
30
M
ø220+0.3+0.1
100
P
10
stroke
stroke: 7000 max.
LinkLift 100
magazine sizes
347
355
395
M20 x 40
ø79.3h11
B 80x74 e9 DIN 5482
LINEA · TEXT + DESIGN
Linear telescopic
lifting columns
www.serapid.com
SERAPID USA INC.
5400 18 Mile Road
Sterling Heights MI 48314, USA
Phone +1 586 274 0774
Fax
+1 586 274 0775
[email protected]
453, Route de Dieppe · B.P. 15
F-76660 Londinières, France
Tél. +33 (0)2 35 93 82 82
Fax +33 (0)2 35 94 10 93
[email protected]
SERAPID Ltd
Elm Farm Park, Great Green, Thurston
Bury St Edmunds – IP31 3SH, UK
Tel: +44 (0)1359 233335
Fax: +44 (0)1359 232800
[email protected]
SERAPID Deutschland GmbH
Postfach 1711
D-97967 Bad Mergentheim
Tel. +49 (0)7931 96 47-0
Fax +49 (0)7931 96 47-28
[email protected]
Second Edition, Revision A · SERAPID USA 06-2008
Brand and product names are trademarks of their respective holders. Subject to change.
SERAPID S.A.S.