m/v Baltic

Transcription

m/v Baltic
Our common purpose is a safe
fabrication of product that meets
our Customer requirements
Navikon SRY Ltd based in Świnoujście was founded by Bogusław
Sobczyk in 1991.
Nowadays, Navikon SRY Ltd operates in the ship repair,
conversion and steel construction industry and together with
its subsidiaries employs over 250 professionals ready to
respond to any repair or newbuilding requirements.
Thanks to its policy of investment in equipment, technology and
human resources Navikon is amongst the most established
northwestern Polish companies operating in ship repair,
conversion and industrial construction.
Navikon Group
WELDING
WPS
Welders
Welding
Supervisor
1.
2.
3.
4.
5.
Certificate for welding of hull structure and steam boilers issued by GL, PRS, UDT
Welding Procedure Specifications (WPS) approved by DNV, LRS, GL, UDT, PRS, RINA in
accordance with PN-EN ISO 15164-1 , ISO 15164-2, and offshore standard DNV-OS-C401
Welder’s certificates issued by DNV, GL, PRS, TUV in accordance with norm PN-EN 287-1 and EN
ISO 9606-2
Certificate of International Welding Engineer in accordance with norm PN-EN 14731.
Certificates for non destructive testing of welding seams in accordance with norm EN473 in the
following range of application:
Quality
· VT2 – issued by TUV
Control
· MT2 – issued by Welding Institute
Inspectors
· UT2- issued by Welding Institute
· PT2 - issued by Welding Institute
· IWI International Welding Inspector
PAINTING
Certificate for paint coating quality assurance issued by Hempel
Certificate for paint coating according to Norsok standard issued by Hempel
Seagoing ship paint coat supervision within the scope conforming to IMO SOLAS II-1/3-2 and MSC.215(82),
MSC.216(82), MSC.244(83). NACE-Coating Inspector Level 2 and FROSIO Inspector Level III.
Approval of Hempel, Jotun, Sigma, International, Kansai
SHORE INDUSTRY
Certificate for manufacture of pressured /non pressured tanks and pipelines issued by Polish Technical Authority /
UDT
QUALITY MANAGEMENT
Quality Management System in accordance with ISO 9001:2008 by RINA and Quality Management System of Welding
ISO 3834-2 by TUV
REPAIR BERTH IN ŚWINOUJŚCIE
Two repair berths: total length 400 m
FLOATING DOCK IN ŚWINOUJŚCIE
Our own floating dock 123 m/25m, 5000 tons
CRANAGE - mobile cranes up to 160 tons
2 WORKSHOPS - 5000 m2
DOCKS AVAILABLE IN COOPERATION WITH POLISH YARDS
Szczecin up to 200/32 m
Gdynia
up to 240/40 m
Productivity
Steel renewals
Sandblasting, general
Sandblasting inside tanks
SPS deck replacement
up to 10 tons/day
up to 2000 m2 /day
up to 1000 m2 /day
up to 200 m2 /day
GENERAL
MANAGER
President of
the board
Bogusław
Sobczyk
TECHNICAL MANAGER
Artur Niewiarowski
Andrzej Gawlik
Kamil Czuba
Robert Deja
Przemysław Wudz
ANTICORROSION
AD
INSULATION
WORKS,
MARINE
COATING LTD.
PROJECT MANAGER
Sławomir Wachuda
Kamila Konieczna
Przemysław Wudz
HULL
DEPARTMENT
MECHANICAL
AND
ELECTRICAL
WORKS,
NAVIKON
ENGINEERING
LTD.
Michał Kowalski
FINANCIAL
MANAGER
Katarzyna
Kowalska
QUALITY
CONTROL
Piotr
Wojtkiewicz
HSE OFFICER
Łukasz Kijak
PRODUCTION
MANAGER
Vice-president of
the board
Grzegorz Sobczyk
EUROPEAN
WELDING
ENGINEER
SUPPLY
CHIEF
MECHANIC
ENGINEERING
MASTER
OF
DOCKING
Newbuildings &
Conversions
General ship’s
repairs
Offshore
constructions
Customized
floating dock
Splittnes
m/v Baltic
We have renewed a few tons of steel located in the
hopper , main deck as well as on the hull. Simultaneously
our plumbers have renewed number of different pipes
throughout the vessel.
Navikon is working as an exclusive service for this
Owner for works connected with self discharging
system.
Timor Stream
Scope of the repair was renewal of about 100 tons of new steel located in
forward part of the hull after collision.
M/V MORNES
Renewal of cargo hold tanktop
M/V LISTERHAV
In total has been replaced almost 50 tons of steel (internals, bilges and shell
plating) including 36 tons which have been done by Navikon flying team
m/v Skagern
m/v ICE STAR
Repair of m/v ICE STAR form Dutch company Management Facilities Group. Bulkheads in 5 ballast
tanks and machine room were replaced, also all
holds were painted.
Renewal of the bow
part after collision
CON RO 220
Ro-Ro vessels type CON RO 220 was
converted for carrying of cars
Barge SB 8422
One part of the job was installation of longitudinal
bulkheads in ballast tanks to reinforce the cargo deck.
Additionally we did big scope of various electro works
consist cables laying, installation of cable trays & lamps
MT Zeeland
Modify/repair tanktop structure lower cargo hold in way of
elevator, modification of fish tank area, separation of sludge
tank, Rearrangement of engine room subdivision,
Rearrangement of laboratory & vacuum space, rearrangement
of upper deck, rearrangement of cargo elevators, division of
upper forepeak, modification upper platform engine room,
provision store crane, modification cargo hatch 3, modifications
aft deck, modification in fish tanks, cargo hold hatch,
modification ventilation inlets in funnel, stainless steel box
compressor room, plint froster deck
PEREGRINE
There were installed truck railings installed on 3 decks.
Anti-skid layer (bimagrip) was put on one deck
m/v LISTER
Conversion of bulker vessel with single hold into self
discharging grain bulker with 2 separate holds.
Conversion of the vessel was connected with regular
DD repairs & maintenance work
Navikon SRY Ltd is a manufacturer specialized containers and
containerized technological modules for both offshore and
onshore industry.
Navikon offshore containers are designed, manufactured and
tested in accordance with requirements of DNV 2.7.1/2.7.3
standard and painted according to restrictions of Norsok M501
to full acceptance of Frosio inspectors. Containers can be
produced of carbon steel, stainless steel and aluminum.
Our offer includes the following
products range:
DNV 2.7.1/2.7.3/NORSOK 501 certificated
offshore containers ISO size and oversized
units
open top containers
baskets
lifting frames
Workshops
mini containers
toolboxes
IBC Carriers
We can deliver customized, turn-key floating dock with lifting capacity up to 8000 tons.
Last made
5000 tons dock's principal dimensions:
Length over all: 123,21 m
Length of the pontoon: 110,71 m
Breadth (moulded): 30,00 m
Breadth between sidewalls: 25,00 m
Pontoon depth: 2,50 m
Design draft: 9,68 m
The dock was painted with Hempel anticorrosion
system and equipped with 2 units of
remotecontrolled cranes 5 & 8 tons and
generator set 1x630 kVA, 1x300 kVa.
mechanical and electrical works on ship in voyage and in ports
diesel engine repairs, overhauls and inspections
(main and auxiliary engines) which includes: crankshaft
replacements, cylinder heads overhauls, pistons and liners jobs,
fuel injection pumps and injectors overhaul, turbochargers
all necessary measurements, settings and adjustments
(e.g. shaft alingment, fuel injection timing, measurement of
cylinder liners etc.)
bow thrusters repair
complete recondition of existing alarm systems for M/E and
Cargo monitoring
switchboards repair and maintenance (GAC, AVR)
power generators overhaul
Michał Kowalski
General Manager
www.navikon-engineering.pl
tel. +48 693 373 247
[email protected]
Navikon SRY in cooperation with Navisafe Belgium has founded Navisafe Poland - a company specialized
with Servicing of Lifeboat and Launching Appliances.
Annual and Five yearly servicing
Repair of Lifeboats and Launching Appliances
Polyester Repairs (GRP)
Load testing
Andrzej Gawlik
General Manager
www.navisafe.pl
tel. +48 693 375 909
[email protected]
General scope of services:
Industrial paint coatings
Spray insulations of mineral and glass wool
Water cleaning
Sand-blasting
Tank cleaning
Robert Jóźwiak
General Manager
www.marinecoating.pl
tel. +48 91 326 29 35
mob. + 48 609 79 98 15
[email protected]
fff
Mr Slawomir Wachuda
Commercial Director
Mob. +48 693 373 320
e-mail: [email protected]
Mr Przemyslaw Wudz
Project Manager/
Navikon's abroad activity
Mob. +48 693 373 257
e-mail: [email protected]
Mr Andrzej Gawlik
Project Manager/
New building & ship's safety equipment
Mob. +48 693 375 909
e-mail: [email protected]
Mr Piotr Wojtkiewicz
Quality Control Surveyor/
Quality department
Mob. +48 661 967 849
e-mail: [email protected]
Mr Lukasz Kijak
Work Safety Specialist/
Work safety department
Mob. +48 693 375 507
e-mail: [email protected]
Bogusław Sobczyk
Chairman
Grzegorz Sobczyk
Vice-Chairman
Mr Cezary Gawrych
Chief Engineer
Mob. +48 693 719 859
e-mail: [email protected]
Mrs Ryszarda Alksnin -Kozlowska
Personnel Manager
Mob. +48 693 551 050
e-mail: [email protected]
Mrs Kamila Konieczna
Commercial Manager/New building
Mob. +48 693 437 116
e-mail: [email protected]
Artur Niewiarowski
Project Manager
Mob. +48 601 973 030
e-mail: [email protected]
Mr Marcin Seweryn
Project Engineer
Mob. +48 601 086 670
e-mail: [email protected]
Mr Kamil Czuba
Project Manager
Mob. +48 661 883 323
e-mail: [email protected]
CONTACT DETAILS
Office
72-602 Świnoujście
13 Ludzi Morza St.
tel. +48 91 322 0880
fax.+48 91 322 0886
[email protected]
http://www.navikon.pl