VIRTUAL H.264 8/16 CH DVR USER GUIDE

Transcription

TABLE OF CONTENTS
DATE: 2009/03/01 VER 1.3
1. Features ................................................................................................................................................... 5
2. Hardware Overview ................................................................................................................................ 6
2-1. Hardware ....................................................................................................................................... 6
2-2. Front Panel ................................................................................................................................... 8
2-3. Back Panel .................................................................................................................................... 9
2-4. Remote Controller ......................................................................................................................... 9
3. System Setup ........................................................................................................................................ 10
3-1. Setup – Main Screen ................................................................................................................... 10
3-2. Setup – Live Mode ....................................................................................................................... 12
3-3. Setup – Recording Mode ............................................................................................................. 13
3-3-1. Motion Zones .................................................................................................................... 14
3-3-2. Recording Schedule ......................................................................................................... 14
3-4. Setup – Device Mode .................................................................................................................. 15
3-4-1. ALARM-OUT..................................................................................................................... 16
3-4-2. PTZ Setup ........................................................................................................................ 16
3-5. Setup – System Mode ................................................................................................................. 17
3-6. Setup – Security Mode ................................................................................................................ 19
3-7. Setup – Network Mode ................................................................................................................ 19
3-7-1. Ports ................................................................................................................................. 20
3-7-2. Network types ................................................................................................................... 21
3-7-2-1. LAN ............................................................................................................................ 21
3-7-2-1. DHCP......................................................................................................................... 21
3-7-2-1. ADSL (PPPOE) .......................................................................................................... 21
3-7-3. SEND E-MAIL ................................................................................................... 21
3-8. Setup - Storage Mode.................................................................................................................. 22
3-9. Save Setup .................................................................................................................................. 22
4. Live & Search ........................................................................................................................................ 23
4-1. Live Window ................................................................................................................................ 23
4-2. Search Window ........................................................................................................................... 24
4-2-1. TIME LINE SEARCH .......................................................................................................... 24
4-2-2. EVENT Search...................................................................................................................... 25
4-2-3. GO TO SPECIFIC TIME ....................................................................................................... 26
4-2-4. GO FIRST TIME................................................................................................................... 26
4-2-5. GO LAST TIME .................................................................................................................... 26
4-2-6. LOG ...................................................................................................................................... 27
4-2-7. ARCHIVE .............................................................................................................................. 27
1
4-3. Play mode .................................................................................................................................... 28
5. Archiving And Backup ......................................................................................................................... 29
5-1. Capturing Still Images or Video ................................................................................................... 29
5-1-1. Live Mode ......................................................................................................................... 29
5-1-2. Playbak Mode ................................................................................................................... 29
5-2. Backp Still Images or Video from Archive List ........................................................................... 30
5-3. Backup Video Playback ............................................................................................................... 31
5-3-1. Playback Backup Video in AVI Format ............................................................................. 31
5-3-2. Playback Backup Video in Exclusive (NaFs) Format ....................................................... 31
6. Upgrading Firmware ............................................................................................................................. 32
7. Network – Remote Viewer .................................................................................................................... 33
7-1. Overview ...................................................................................................................................... 33
7-2. Minimum PC Requirements ......................................................................................................... 33
7-3. Program Installation ..................................................................................................................... 33
7-4. Live viewer ................................................................................................................................... 34
7-5. Search and Playback Viewer....................................................................................................... 36
7-5-1. Backup.............................................................................................................................. 37
7-6. PC System Configuration ............................................................................................................ 37
7-6-1. General ............................................................................................................................. 37
7-6-2. Site ................................................................................................................................... 38
7-6-3. Event ................................................................................................................................ 38
7-6-4. Record .............................................................................................................................. 39
7-6-5. Disk ................................................................................................................................... 39
8. Network – IE Browser Viewer ............................................................................................................. 40
8-1. Download Web Brower Viewer and Connection ......................................................................... 40
8-2. Main Features .............................................................................................................................. 41
8-2-1. Live ................................................................................................................................... 41
8-2-2. Search and Playback ....................................................................................................... 42
APPENDIX.................................................................................................................................................. 43
1. Registering DDNS in Dyndns.com.................................................................................................. 43
2. DDNS Settings ................................................................................................................................ 47
3.Connect Remote Software or IE Browser. ................................................................................... 48
APPENDIX 2 HDD Compatiable Table.................................................................................................... 50
2
SPECIFICATIONS
8/16 Channel, 120 fps(or 100fps)
Item
Channel, Input Level
8/16 CH, Composite 1.0Vp-p, 75 Ohm
Signal Format
NTSC/PAL(Auto detection)
Input
Video
Audio
Output
1 CH Composite Output/15pin D-Sub VGA Output
Input / Output
4 Line In / 1 Line Out
Sensor Input
4 (NC/NO Selectable)
Alarm Output
1 ( By Alarm, Motion, Video Loss)
Compression
Virtual H.264
Multi Operation
Triplex (Playback/Record/Network)
Alarm
120fps(CIF) /
NTSC
60 fps(Half-D1) / 30 fps(D1)
Resolution
Recording
100fps(CIF) / 50 fps(Half-D1) / 25 fps(D1)
PAL
Recording Quality Grade
Network/Standard/High/Superior/Ultra
Recording Mode
Continuous / Schedule / Motion/ Sensor/ Manual
Motion Detection
Motion detection setup by Grid
Display
Speed
Real Time Display(NTSC/PAL)
Playback
Search Mode
Event, Archive, Log, Time Line
Internal HDD
S-ATA (Up to 1TB)
Storage
USB 2.0 flash stick
JPEG & AVI & DVR
Network
Moving picture & Still Image
Backup
Serial port
Camera Control
1 RS-485
Dynamic IP Support
Yes
Network Interface
10/100 base-T Ethernet (RJ-45)
Functions
Live, Search, Backup
Power Source
DC 12V 5A
Unit Weight
3.5kg
Network
Client S/W
General
435(W) x 335(D) x 54(H)
Dimension (W x H x D)
During operation: 5°C - 40°C
Operation Temperature
During storage: -10°C - +50°C
0 - 90%
Operation Humidity
3
Warnings
Installation and servicing should be performed by qualified and experienced personnel only.
DVR should always remain OFF during any installation process
Product Components
The package contains the main unit and its components as specified below. When you purchase the unit, please
check to ensure the components specified below are included
DVR Set X1
Client Software CD X1
Remote Control X1
Battery1.5V (AAA x 2EA) X1
User Manual X1
Power Adaptor X1
Power Cord X1
4
1. Features
● 8/16 channels real-time live display and 8/16 channels simultaneous playback.
● Virtual H.264 - Unbeatable recording picture quality and compression ratio has been tuned for years. It best fits
for minimizing recording space and networking speed.
● TRIPLEX - Simultaneous Recording, Playback, and Networking
● NaFS (File System developed) - Designed & developed for preventing loss and broke of recording data by any
power failure.
● Multiplexing operation
● Reliability - Real Time Operating System and simplified hardware as well as watchdog timer ensure the
reliability.
● Individual channel recording and playback with different frame rate.
● High-quality live and playback resolution.
● Multi-site management - Supported by CMS application.
● Network features - Remote Live, Playback, and Backup.
● Network via LAN, DHCP, DDNS,ADSL (Dynamic and Static IP address).
● User-friendly setup menu with graphic user interface.
● Easy to schedule a complicated weekly recording plan.
● The OSD icons on screen provide various helpful and well-explained information.
● Motion detection – Grid 15x12 motion zone per camera is provided.
● USB ports for JPEG, H.264 data backup and software upgrade using USB flash memory stick.
● Still image capture and review as JPEG format.
● Easy operating with the buttons on the front and the remote controller.
● User verification by password certification.
● Video loss detection.
● Backup - Still-images or AVI data into USB flash memory stick and Network.
● Multi-Languages -User can easily select language from Setup menu.
5
2. Hardware Overview
2-1 Hardware
USB PORT
Front Panel
8ch DVR BASE
16ch DVR BASE
16ch Audio Cable
6
Please remove top cover of the DVR (show as picture above) and install one of the
HDD below:
Size
Buffer
HITACHI
160 GB~1TB
8 MB~16MB
MAXTOR
160 GB~300GB
2 MB~16MB
WesternDigital
200 GB~1TB
8 MB~16MB
Seagate
80GB~1TB
2MB~32MB
Compatible HDD List
IMPORTANT: DO NOT USE THE FOLLOWING HDD:
1. MAXTOR 160GB (MODEL NUMBER: 6L160PO) HDD
2. WESTERN DIGITAL 320GB HDD
3. PLEASE REFER TO APPENDIX 2 FOR DETAIL HDD COMPATIBLE LIST.
7
2-2. Front Panel
Front Panel buttons
Name
NUMBER(1~0)
Description
Select channel with number button (use +10 button for 16ch DVR)
SEQ
Auto sequencing of channels in full screen mode. (Toggle)
PTZ
Enter PTZ mode
SETUP
SEARCH
Enter SYSTEM SETUP menu.
Enter Search menu.-->Event search /Time line search /Log /Archive search
Archiving in live or playback mode.
BACKUP
Live mode: Backup live picture only
Playback mode: Backup picture and video
ee
Rewind the footage at 1x, 2x, and 4x speed in playback mode.
Jump/Step backward. – In playback mode, the playback position moves 60
e
seconds backward.
Jump/Step forward – In playback mode, the playback position moves 60
f
seconds forward.
ff
Fast forward the footage at 1x, 2x, and 4x speeds in playback mode
Start and stop recording manually.
REC
Scroll up in the system menu or select camera 1 in live mode. It can also be
UP
used as number 1 when entering password.
RIGHT
DOWN
LEFT
Move right or change values in system menu or select camera 2 in live mode.
It can also be used as number 2 when entering password.
Scroll down in the system menu or select camera 3 in live mode. It can also be
used as number 3 when entering password.
Move left or change values in system menu or select camera 4 in live mode. It
can also be used as number 4 when entering password.
Enter
Select full screen or quad view in live display mode.
ESC
Return or cancel command
Front LED and Port
Name
Description
LCD
Solid light when DVR is power on.
HDD
Solid light when DVR is accessing hard disk.
8
2-3. Rear Panel
Table 2.2.1. Rear Panel Connections
Label
VIDEO IN
Operation
8 /16 connectors for video input.
Connect camera output to Video-in (NTSC/PAL)
VIDEO OUT
VGA
AUDIO
1 connector for video output.
Connector for VGA monitor
Audio 1~4:AUDIO IN/ADUIO OUT(16ch use DSUB-9 for audio input and output)
SENSOR IN
Connection for sensor device.
ALARM OUT
1 alarm device output.
Provides simple On/Off switching by using relay. 0.5A/125V, 1A/30V
RS-485
LAN
Connect to PTZ camera,+ÆPTZ D+ / - ÆPTZ DRJ45 connector for LAN connection.
DC 12V
Apply 12V DC using the DC adaptor supplied with the equipment.
SWITCH
Select either VGA monitor or CVBS (Composite Video Blanking Sync) monitor.
DO NOT CHANGE THIS SETTING WHEN DVR IS ON.
DVR MUST REBOOT IF SWICH IS FLIPPED.
2-4. Remote Controller
ID
REC
NUMBER
ee
ff
f/∥
f--
DVR ID setup
Record manually
Press number button to select channel. For channel 11~16,
press +10 key and followed by 1~6
Fast Rewind
Fast Forward
Play/Pause
PTZ/ Jump/Step forward
--e
SEL
DIRECTION
SETUP
SEARCH
ESC
BACKUP
Jump/Step backward
Enter
Direction or number 1 to 4
Setup menu screen
Search menu screen
Esc
Capture
SEQ
Sequential channel conversion
9
3. System Overview
3-1. Setup – Main Screen
After pressing the <SETUP> button, DVR will prompt for password. The default password is 1111, which can be
entered by pressing the <UP> button 4 times and followed by <ENTER> button. It is highly recommended to setup
a new password immediately. Please refer to section 3.6 for how to assign a password. After a password has been
assigned, enter the password by using the direction keys (representing 1, 2, 3, & 4) or number keys, and press
the <ENTER> button for the password validation. Once the password is entered, you will see the screen as follow.
Navigate through the menu items and press <ENTER> button to enter the sub-category menu.
1
4
2
3
Setup Menu Screen
10
Setup Menu Configuration
LIVE
OSD
SEQUENCE
SEQ-DWEL TIME
OSD CONTRAST
CHANNEL
RECORD
DISPLAY, BRIGHTNESS, CONTRAST, HUE, SATURATION
RESOLUTION
CHANNEL
FRAME RATE, QUALITY, RECORDING, MOTION ZONE, MOTION SENSITIVITY,
SENSOR RECORDING, PRE RECORD, POST RECORD, AUDIO, SCHEDULE
DEVICE
ALARM OUT
PTZ
KEY TONE
REMOTE CONTROL ID
SENSOR
SYSTEM
TYPE
DVR ID
DESCRIPTION
LANGUAGE
LOAD FA CTORY DEFAULT
LOAD DEFAULT
DATE FORMAT
SET DATE & TIME - DAY LIGHT SAVING
SECURITY
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
NETWORK
PORT
WEB PORT
CLIENT ACCESS
BANDWIDTH SAVING
NETWORK TYPE – DHCP/ LAN / ADSL (PPPOE) – DDNS
SEND E-MAIL
STORAGE
OVERWRITE
FORMAT
DISK INFO
LOAD SETUP FROM A USB
SAVE SETUP TO USB
RECORD LIMIT
RECORD LIMIT DAYS
11
3-2. Setup – Live Mode
Set the values for live display. Navigate through the menu items by pressing <UP> or <DOWN >button. The value
of the menu item can be modified by pressing <LEFT> or <RIGHT> button.
Menu Items in Live Mode Setup
Item
OSD
SEQUENCE
SEQ-DWELL TIME
Description
Enable/disable on-screen display.
Enable/disable SEQ button
Set the dwell time for each, 4, 9 or 16 channels display in sequential display
mode.
OSD CONTRAST
CHANNEL
Set the contrast of the On Screen Display (OSD)
Select the channel for applying the following settings.
Press SELECT to edit channel name.
DISPLAY
BRIGHTNESS
CONTRAST
HUE
SATURATION
Enable/disable the video channel display in live display mode
Change the brightness value for the specified channel
Change the contrast value for the specified channel
Change the hue value for the specified channel
Change the saturation value for the specified channel
12
3-3. Setup – Recording Mode
Set the values for recording video. Navigate through menu items by pressing <UP> or <DOWN> button. User can
change the value of the menu item by pressing <LEFT> or <RIGHT> button.
Menu Items In Recording Mode Setup
Menu item
RESOLUTION
Description
Set the resolution among 704x480, 704x240, or 352x240 for
NTSC. (PAL: 704*576/ 704*288/ 352*288)
CHANNEL
Select the channel to apply the following settings. Changes will
immediately appll to the selected channel.
FRAME RATE
Set the frame rate for the specified channel. The sum of the frame rate
values from each channel cannot exceed the maximum frame rates for a
specific recording resolution.
120fps(CIF) / 60 fps(Half-D1) / 30 fps(D1)(NTSC)
100fps(CIF) / 50 fps(Half-D1) / 25 fps(D1)(PAL)
QUALITY
Select the recording quality for the specified channel from NETWORK /
STANDARD / HIGH / SUPERIOR / ULTRA.
RECORDING
Set a recording mode for each channel.
Continuous / Motion / Sensor / Schedule / Disable.
MOTION ZONE
Select Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
Adjust the motion sensitivity from 1 to 9.
SENSOR RECORDING
PRE RECORD
Enable setting up to 4 sensors for the specified channel.
Enable/disable pre-event recording. Pre-event recording time is 3 seconds
and only intra-frames are recorded for pre-event recording.
13
POST EVENT RECORD
Set the post event recording time duration up to 30 seconds for the
specified channel.
SCHEDULE
Set the recording schedule.
NOTE
1. In order to receive smooth video during playback, it is highly recommend to set the
frame rate of each channel for more than 3fps
2. Switch to full screen during playback while audio recoding is enabled.
3-3-1. Motion Zones
By selecting Partial Zone in the Motion Zone menu, user can setup the motion sensing zones in the screen. Move
around each rectangular zone using 4 direction key buttons and press <ENTER> button to include the rectangular
region as part of the motion sensing zone. The rectangular blocks included as part of the motion zone are indicated
by changing the color of the blocks.
Motion Zone Selection Screen
3-3-2. Recording Schedule
To set up a recording schedule, select SCHEDULE in the RECORD menu.
Use the arrow buttons to navigate through the items and set the recording.
[ALL]: Press <ENTER> button to apply to the entire time zone and all channels.
[SUN to SAT]: Press <ENTER> button to apply to the entire time zone for the specified channel.
[ENTER]: The recording mode such as C (continuous), M (motion), S (sensor) and disable mode can be selected
by using <ENTER> button.
[COPY FROM to COPY TO]: Copy the entire setup values of the selected channel to another channel
14
Schedule Recording Setup Screen
3-4. Setup - Device Mode
Menu Items in Device Setup Screen
Item
ALARM-OUT
PTZ
KEY TONE
REMOTE CONTROL ID
Description
Set the sensor, motion, and video loss for each alarm.
Set the camera speed, number, type and ID for PTZ control
Enable/disable key tone.
Select an ID of remote controller.(default ID is 00)
1. Select ID.
2. Press the same number as ID set in DVR on a remote controller.
Before selecting ID, R:A is displayed as default on the live screen.
SENSOR
TYPE
Select sensor from 1 to 4.
Set the type of sensor for the specified channel. Options are: None,
N/O (normal open), and N/C (normal closed).
15
3-4-1. Alarm-Out
Table 3.4.2. Menu Item in Alarm-Out Setup Screen
Item
Description
ALARM OUT
Only 1 output
SENSOR IN
Enable setting up to 4 sensors out of 16 channels.
MOTION ON
Enable setting up to 4 cameras out of 16 channels.
VIDEO LOSS ON
Enable setting up to 4 cameras out of 16 channels.
ALARM DURATION
Set the dwell time of alarm from 3 to 255 seconds.
Alarm-Out Setup Screen
3-4-2. PTZ Setup
To control the PTZ functions of the camera, connect the controller to the RS-485 port.
For speed dome cameras that supports RS-485, connect them directly to the RS-485 port. If the PTZ is controlled
via RS-232C, a Signal Converter (RS-485 to RS-232C) is a necessary.
In the PTZ Control setting in the setup menu, user can select or set the protocol type of the camera which is the
same as the one that is installed on the site. If the camera has a specific camera ID, select the camera ID by using
<Left> or <Right> button.
Item
Description
CH
Channel number that the PTZ is
connected to
NAME
Protocol type
SPEED
19200, 14400, 9600, 4800, 2400
ID
PTZ Setup Screen
0-63
Menu Item in PTZ Setup Screen
16
3-5. Setup – System Mode
In this menu, system parameters can be input. Navigate through the menu items by pressing <UP> or <DOWN>
button. User can change the value of the menu items by pressing <LEFT> or <RIGHT> button and <UP> or
<DOWN> button.
Menu Items in System Setup Screen
Item
Description
DVR ID
The name of the system. Press <ENTER> button to select and move through
the position for each alphanumeric character by pressing <LEFT> or <RIGHT>
button. <UP> or <DOWN> button is used to change the character for each
location. 9 characters are available.
DESCRIPTION
LANGUAGE
LOAD FACTORY
System information.
Select system language.
Reset all setting values back to factory default.
DEFAULT
LOAD DEFAULT
Select OFF or ON. Select ON to load defaults.
(Password, date format, DLS, Network setting, and HDD overwrite remain
unchanged)
DATE FORMAT
SET DATE&TIME
DAY LIGHT
SAVING
Select the preferred date and time display
Set the present date, time and daylight saving for the DVR.
Set the DLS (Daylight Saving) for the area.
The options are:
OFF /USA / EU / Others/.
1. USA (DLS time is applied automatically when being on the DLS time
zone and is displayed on the current time)
2. EU (Set the GMT area for DLS time apply on the current time)
17
-
GMT AREA +00:00
3. OTHERS
-
BEGIN (MAR 1ST SUN/00H)
-
END
(SEP 1ST MON/00H)
(Set the BEGIN and END time for the specific area except EU and USA) use
<UP> and <DOWN>buttons to change the value of month, week, day and hour.
CAUTION:
- DO NOT SET THE DLS START FROM 23:00
- DLS CANNOT BE APPLIED IF BEGIN AND END ARE THE SAME.
DVR ID Setup Screen
DVR Information Display Screen
Date & Time Setup Screen
18
3-6. Setup – Security Mode
In this menu, password and security parameters can be input. Navigate through the menu items by pressing <UP>
or <DOWN> button, and use <LEFT> or <RIGHT> button to change the value of the menu items.
Menu Items in Security Setup Screen
Item
Description
ADMIN PASSWORD
Set a password for administrator. The password numbers can be input by
using direction keys. The default password is 1111. Admin password works on
all operations.
USER PASSWORD
Set a password for user. The password numbers can be input by using
direction keys. The default password is 1111.
User password works for Search only.
NETWORK
PASSWORD
Set a password for network client. The password numbers can be input by
using direction keys. The default password is 1111.
3-7. Setup – Network Mode
Network parameters can be input in this screen. These parameters are used for remote clients who connect to the
DVR over the network.
Network Setup Screen
19
Menu Items in Network Setup Screen
Item
PORT
WEB PORT
CLIENT ACCESS
BANDWIDTH
SAVING
NETWORK TYPE
Description
Video Port number (Default: 5445)
IE Browser port number (Default:80)
Enable/Disable remote access through client software.
Enable/Disable only key frame transmission. “ON” mode is suitable for use of
low network bandwidth. Set “OFF” for normal use.
Set the type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the Network Setup screen change according to the
network type you have selected.
DHCP
Set to use DHCP (If this is selected, DVR will obtain IP automatically varying
from time to time from network.)
ADSL (PPPoE)
ID: Registered ID is necessary for ADSL connection.
Password: Registered password is necessary for ADSL connection.
LAN
IP: Register IP address that is assigned for DVR.
Gateway: Register Network Gateway
Subnet Mask: Register Network Subnet Mask
DNS Server IP: Register Network DNS Server IP.
DDNS
Enable/disable using domain name address through DYNDNS server.
By choosing “ON” mode, DDNS server name appears for domain registration.
The DDNS sever name is www.dyndnscom.
Registration
Please refer to “How to register DDNS”
SEND E-MAIL
DVR will send an Email to recipient if Event occurred or IP Change.
3-7-1. Ports
When connect one or more DVRs to a network through an IP sharing device, each device must have a unique TCP
port number in order to access each unit from WAN. Also, a Port Forwarding must be configured in the IP sharing
device (router) in order to access to the desire DVR.
Note: This port number is listed next to the Port menu option in the Network Setup screen. If you plan to access
the DVR units within the LAN, the TCP port does not need to be changed.
Network access beyond Router
In order to access beyond Router (Firewall), user must open 2 TCP ports for Command level, Live channels,
and Storage channels. If this port is not open properly, user will not be able to access DVR beyond a router.
If DVR assigns port number with 5445 and WEB for 80, user must open 2 TCP ports of 5445 and 80.
20
3-7-2. Network types
There are three network types. Each type requires different settings.
3-7-2-1. LAN
1. Please contact your network administrator if you need information to assign DVR with Static IP.
2. When DVR is installed in IP sharer that is connected with ADSL, a user can assign Static IP to DVR from IP
sharer using “DMZ” function
3-7-2-1. DHCP
An IP address is automatically assigned by the DHCP server, which automatically assigns IP address and other
parameters to new devices.
3-7-2-1. ADSL (PPPOE)
Use this ADSL (PPPoE) function when the network type connecting DVR is using PPPoE method.
3-7-3. SEND E-MAIL
IP Notification: DVR will send an Email notification to recipient automatically if IP changes.
EVENT ALARM: DVR will send an Email notification to recipient automatically if event detected.
MAIL ADDRESS: Recipient Email address
MAIL SERVER name: Recipient Email server address
ID: Recipient Email login ID
PASSWORD: Recipient Email login password
RETURN MAIL ADDRESS: Sender Email address
21
3-8. Setup - Storage Mode
User can set recording mode or initiate format of the hard disk driver.
Storage Setup Screen
Item
Description
OVERWRITE
Overwrite existing data when hard disk drive is full.
FORMAT
Format hard disk drive.
DISK INFO
Information such as capacity, usage, recording times, and others of all HDD installed
in DVR.
SAVE
SETUP
TO A USB
User can save the current configuration of DVR to the USB memory stick by simply
insert the USB stick on the front panel and press <ENTER> / <SEL> to start the
saving process
LOAD
SETUP
FROM A USB
User can upload the configuration of DVR to another DVR using the USB
Memory stick by simply insert the USB stick on the front panel and press <ENTER> /
<SEL> to start the loading process.
After upgrade is completed, DVR will reboot automatically and setup value will be
applied.
RECORDING
Enable/disable recording limit days for the video data into the hard disk drive.
LIMIT
RECORDING
Set the recording limit days for the video data into the hard disk drive from 2 to 90
LIMIT DAYS
days.
3-9. Save Setup
To apply the changed setup values, select the SAVE SETUP menu and select CONFIRM.
NOTE: DVR WILL REBOOT AUTOMATICALLY WHEN USER MODIFIES:
1. NETWORK IP ADDRESS
2. TIME & DATE
3. FORMAT HDD
4. LOAD DEFAULT
22
4. Live & Search
4-1. Live Window
In the Live window, video inputs from the cameras are displayed on the configuration of the live setup. Various
indicators showing the status of the DVR are shown as OSD symbols. Refer to Table 4.1.1 for further explanation
of these indicators.
Live Window
Indicator Icons in Live Window
Icon
Description
Continuous recording in progress
Manual recording in progress
Motion recording is triggered
Sensor recording is triggered
Indicates the HDD is overwriting
23
ON /OFF Audio function
Indicates alarm output is activated.
Event indicator. When there is an alarm (sensor alarm or motion alarm) in the
video channel, this icon will be highlighted in bright red.
Indicates a network client is connecting to the DVR.
Indicates sequencing mode is enabled.
Indicates the percentage of recorded data into HDD
R:A
Remote controller’s ID. User can define ID number in SETUP Æ system Æ
remote controller ID. User can use remote controller’s ID button to switch ID
number.(Default ID is 00)
4-2. Search Window
Press <SEARCH> button in live mode to enter the Search screen, followed by a password. Use arrow buttons or
remote controller to enter the password.
Search Window
4-2-1.TIME LINE Search
The TIME-LINE search window is used to find the stored video by using the time line bar.
1. Select the date of the video to begin searching by using <LEFT>, <RIGHT>, <UP> and <DOWN> buttons
to navigate through the days.
2. Once you have selected the date, press <ENTER> button to move to the time line search window.
3. Use <LEFT> / <F> / <ADV> or <RIGHT>/ <F> / <REW> buttons to select a time zone in the 24 hours time
table.
24
4. Once you have selected the time zone, press <ENTER> button to move to the 60 minutes time table.
5. Select All or a specific channel to search by using <UP> and <DOWN> arrow buttons.
6. Once you select the channel, use the <LEFT> / <F> / <ADV> or <RIGHT>/ <F> / <REW> arrow buttons to
move the time line select bar (blue) to the point you wish to start playing the video clip.
7. Press <ENTER> button to playback the recorded video.
Time Line Search Screen
V:(Blue) Indicate video data in time bar
H:(Light Gray) Indicate audio data in audio bar
4-2-2. EVENT Search
The Event Search window is used to find stored video. Three categories of search filters can be applied: DATE,
CHANNEL and TYPE. Press <ENTER> to select a value and move down to the next category and use <UP>
arrow button to move up to the categories you have previously entered. The <ESC> button will return the user
to the previous screen.
1. Select the date of the video to begin searching. Use the <LEFT>, <RIGHT>, <UP>, and <DOWN> buttons
to navigate through the days.
2. Once you have selected the date, press <ENTER> to move to the CHANNEL selector.
3. Use <LEFT> and <RIGHT> buttons to change the channel selection from ALL to any of the available
channels.
4. Once you have selected the channel, press <ENTER> to move to the TYPE selector.
5. Use <LEFT> and <RIGHT> buttons to change the type of recording to ALL, MOTION, SENSOR, MANUAL,
or CONTINUOUS.
6. Once you have selected the type of recording to search for, press <ENTER> to show a list that meet your
search criteria.
7. Use <UP> and <DOWN> buttons to scroll through the on-screen listings.
8. Use <LEFT> and <RIGHT> buttons to display a list of events that happened previous to or after the current
selection.
9. Once the desired event has been selected, press <ENTER> to start playing back the selected video.
25
10. Press the CAPTURE (BACKUP) button to launch the archiving function in playback mode.
Event Search Screen
TYPE:
A: All Event Recording
M: Motion Recording
S: Sensor Recording
R: Manual Recording
C: Continuous Recording
4-2-3. GO TO SPECIFIC TIME
You can search for specified data by setting the time and date in this menu. Use <LEFT> or <RIGHT> button to
move from left to right in this menu. Use the <UP> or <DOWN> button to set the date and time.
GO TO Search Screen
4-2-4. GO TO FIRST TIME
You can access to the first data which has been recorded into the HDD disk by pressing this option.
4-2-5. GO TO LAST TIME
You can access to the last data which has been recorded into the HDD disk by pressing this option.
26
4-2-6. LOG
User can see the log list by selecting this menu.
Log List Screen
4-2-7. ARCHIVE
The ARCHIVE SEARCH window is used to find the stored video.
1. Select the date on the calendar to begin searching by using <LEFT> or <RIGHT> button.
2. Once you have selected the date, press <ENTER> button to move to the list of recording data.
3. Use <UP> or <DOWN> button to scroll through the onscreen listings.
4. Press <ENTER> button to see the selected video in paused mode.
5. Press <ARCH> button to archive the video into USB memory stick.
Archive Search Screen
27
4-3. Play Mode
During the playback of a recorded event, the mode changes from SEARCH to PLAY. While in PLAY mode, you may
return to SEARCH LIST by pressing the ESC button.
Button Functions in Play Mode
Button
Description
ESC
Return to the previous menu screen or exit from the setup menu
ee
Press to rewind the footage at 1x, 2x, 4x, and 8x speeds. Reverse playback speed
is shown as -1x(normal), -2x (2 times normal), -4x (4 times normal), and -8x (8
times normal) at the bottom right of the screen.
ff
Press to fast forward the footage at 1x, 2x, 4x, and 8x speeds. Playback speed is
indicated as +1x, +2x, +4x, and +8x for normal, twice, 4 times, and 8 times of the
regular speed at the bottom right of the screen.
Search/f/∥
Press to play or pause recorded video.
f--
Jump/Step forward. Playback position moves 60 seconds forward.
--e
Jump/Step backward. The playback position moves 60 seconds backward.
Use to select channel 1 to 4 in full screen mode or change to quad display by
<LEFT> or <RIGHT> button.
The channel display in quad display mode is followed the setting in the setup
menu.
ENTER
Switch between full screen and current display mode.
28
5. Archiving and Backup
To backup a still image or video to a USB storage device, user must archive a still image or video to the hard drive.
5-1. Capturing Still Images or Video
5-1-1. Live Mode
Still images can be captured and archived onto the USB stick or hard drive in live mode or while playing back
recorded video.
In live mode, press<BACKUP> button to launch the archive function.
1. When you press <BACKUP> button, the archiving screen will display as follow
2. Select a media to backup.
3. DVR will start archive the data to the selected media.
Still Image Archiving and Backup Screen
5-1-2. Playback Mode
Video can be captured and archived onto the USB stick or USB hard drive while playing back recorded video.
In playback mode, press the CAPTURE (BACKUP) button to launch the archiving function.
1. Select either Still Image or Video clip to archive.
2. Select media and duration to archive
Video Archiving and Backup Screen
The DVR will convert the corresponding portion of the video into an AVI file.
Note:
1. ONLY ONE CAMERA CAN BE BACKUP AT A TIME.
2. PLEASE USE DIRECTIONAL BUTTON TO SELECT SINGLE CHANNEL.
3. DVR WILL STOP RECORIDNG DURING BACKUP
29
5-2. Backup Still Images or Video from Archive List
The stored data onto hard drive will be found in the ARCHIVE list in SEARCH menu.
User can back up still images or video into the storage device from the ARCHIVE list.
1. Select the date to begin searching by using <LEFT>, <RIGHT>, <UP> and <DOWN> buttons to navigate
through the days.
2. Press <ENTER> to open the list of stored data.
3. Use <UP> and <DOWN> buttons to scroll through the on-screen list.
4. Use <LEFT> and <RIGHT> buttons to display a list of stored events that happened previous to or after the
current selection.
5. Once the desired event has been selected, press <ENTER> to view the still image or the first frame of the
selected video.
6. Press <CAPTURE> (BACKUP) button to launch the archiving function in playback mode.
Archive Search Screen
30
5-3. Backup Video Playback
5-3-1. Playback Backup Video in AVI Format
Please install the ‘FFDSHOW’ codec from DVR CD if the AVI file is unable to play correctly.
5-3-2. Playback Backup Video in Exclusive (NaFs) Format
Please use VIEWER.EXE player to playback this video format.
Y
Z
[
X
\
]
1. Show the playback speed. Click “f” to adjust playback speed
2. Playback Date / Time
3. Show current playback file
4. Switch the screen size (F:Full screen)
5. Control the playback speed
6. Adjust Audio volume
31
6. Upgrading Firmware
In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory stick.
Create a new folder in the USB memory stick and name it “upgrade”. Copy the firmware upgrade file
“app16xxxxxx.bin” into the “upgrade” folder.
NOTICE
The folder on the USB memory stick must be named “upgrade”.
After the firmware upgrade is copied into the USB memory stick, connect the USB memory stick to the
USB port on the front panel
1. Press <SETUP> button and enter the admin password.
2. Go to PASSWORD and select the ADMIN PASSWORD.
3. Enter the password as 12341234, and press <ENTER> button.
4. The engineering mode screen “DVR DIAGNOSTICS” will appear.
5. Select USB upgrade to start the upgrade process automatically.
6. After the upgrade is completed, select Boot Application to reboot DVR.
Engineering Mode Screen
32
7. Network – Remote viewer
The DVR provides a live remote monitoring feature. Remote monitoring requires the installation of a client software
program on your PC.
NOTICE
In a high bandwidth network, a maximum of four users can access one DVR simultaneously.
In a low bandwidth network it is recommended that only one user access the DVR at a time.
For remote viewing, the frame rate is limited to 1 frame/sec when there is no recording operation in the
DVR. When the DVR is recording, the video frame rate for remote live monitoring will follow the recording
frame rate on the DVR.
7-1. Overview
The remote software supports remote live viewing, search, playback and system configurations.
By installing the Network Client Viewer on a Windows PC, you can monitor real-time and recorded images via
optional Ethernet network.
7-2. Minimum PC Requirements
PC Specification
Minimum Requirement
Recommended
CPU
Intel Pentium Ⅲ 500MHZ
Intel Pentium Ⅳ 2GHZ
Memory
128MB
512MB
VGA
16MB
64MB
Resolution
1024x768
1024x768
OS
Windows 2000
Windows 2000, XP,Vista
Network
10/100Base T
10/100Base T
Others
Direct X 8.1
Direct X 9.0 or Higher
Before installing the program, please check the PC specifications. The Network Client Viewer may not perform
correctly if the PC does not meet the minimum requirements.
7-3. Program Installation
1. Insert the provided CD into the CD-ROM drive of your PC.
2. Follow the on-screen directions.
3. Double click the
icon to start the installation.
33
7-4. Live Viewer
Double click the
icon on your desktop to launch the program.
X
Y
Z
[
\
]
^
Main User Interface
Main Controls in Live
NO
Button
Description
1
CONNECT
Connect to the DVR
2
PLAYBACK
Search and playback for recorded video.
3
LOCK/ UNLOCK
Lock/unlock all operations of the client software.
4
DATE & TIME
Displays the current date and time.
5
ALARM
The alarm output indicator lights up for 5 seconds if alarm output is
activated on the DVR.
6
ZOOM/ FOCUS
Control the ZOOM/ FOCUS features on the remote PTZ camera.
7
PAN/TILT
Control the PAN/TILT features on the remote PTZ camera.
34
CAPTURE
Capture a still image.
Once the capture icon is clicked, this pop-up window appears. The still
image is captured in either jpeg or bmp file format.
PLAY/PAUSE
Play/pause live video.
RECORD
Enable or disable recording of live video to local disk.
SETUP
Setup configuration of client software.
EXIT
Exit the client software.
AUDIO
Use the volume control bar to set the audio level.
The audio can be turned on or off by clicking the audio icon.
HDD USAGE
DVR HDD storage Indicator.
35
7-5. Search and Playback Viewer
X
Y
[
Z
Main User Interface
Main Controls in Search
No
Button
Description
1
LIVE
Live video.
2
DATE & TIME
Displays the recording time of the data selected on the time bar at the
bottom of the main user interface.
3
4
SEARCH
The calendar shows dates with recorded video in a light blue and the
CALENDAR
selected date in dark blue.
TIMELINE BAR
The timeline shows recorded data in dark blue on the bar. Adjust the
time-line scale to playback. Click the play icon to display the recorded
video.
CAPTURE
Capture a still image of recorded video.
MARK IN
Set the video backup start time.
MARK OUT
Set the video backup end time.
BACKUP
Backup the selected recorded video in AVI format.
36
7-5-1. Backup
Backup a recorded video in AVI format from the search viewer.
1. Click <MARK IN> button when the scale on the blue timeline is on the time you wish to the backup file to begin.
2. Set the ending time on the blue timeline by dragging the scale to the ending time for the backup file and clicking
<MARK OUT> button. The color of the timeline between the beginning time and ending time will change to dark
green.
3. Click <backup> button and a window will appear as below.
The start and end time can also be set on this window.
After selecting a channel for backup, click <OK> button and the backup process will begin.
7-6. PC System Configuration
Setup the remote software configuration
7-6-1. General
Once you click on the <SETUP> button, window below will appear. Select security options and set a password.
When you access any of the selected functions, you will need to enter the password.
You can also set the save path for capturing and backup.
Security Option: Set a password for security options.
Save Path: Specify the location to record the receiving video for Backup and still image for Capture.
Automatic reconnection: Select to automatically reconnect to the previously connected IP address if the network
connection is lost.
Display network statistics: Select to display network status, Bit rate and Frame rate.
Time Format: Change the display time format.
37
7-6-2. Site
This option shows the channel information of the DVR and change the channel title.
Click “Addition” to register a site
Double click “Name” to
modify camera name
7-6-3. Event
You can set event items, the amount of local disk space and save path for the log file.
1.LOG – Select to save event log into ‘log file’.
2.ICON – Select to display the event on
live video.
3.EVENT LIST – Show the event
in the ‘Event List” in live mode.
38
Search and check the recorded log data.
7-6-4. Record
Set the recording method for Always, Event, or Auto recording. You can also select individual channels or all
channels to record.
When an Event method is selected, you can set event for motion or alarm with duration. You can also set each or
all channels to record.
7-6-5. Disk
You can select which local disk to use and the amount of disk space you want to allow the program to use for
recording. You can also choose to overwrite data or stop recording when the maximum amount of disk space is full.
39
8. Network – IE Browser Viewer
The DVR provides a live remote monitoring feature by web-browser viewer.
8-1. Download Web Brower Viewer and Connection
Type the DVR’s IP on the IE address field and install ActiveX™ program.
After above, please click “Install ActiveX Control” item again to install the ActiveX object
Please select
to continue installation.
40
8-2. Main Features
8-2-1. Live
X
Y
Z
[
\
]
Main Controls in Live
No
Name
Description
1
DATE & TIME
2
CONNECT
Connect to the DVR
3
SEARCH
Search for recorded video.
4
PAN/TILT
Use these buttons to control the PAN/TILT features on the remote
camera.
5
ZOOM/FOCUS
Use these buttons to control the ZOOM/ FOCUS features on the
remote camera.
6
CONNECTION
Shows the client connection information.
STATUS
PAUSE
Pause the display screen.
CAPTURE
Capture the image from live display.
AUDIO
The audio can be turned on or off by clicking the audio icon.
41
8-2-2. Search and Playback
X
Y
Z
[
\
]
Main Controls – Search & Playback
No
Name
Description
1
DATE & TIME
2
Connect/Disconnect
Connect / Disconnect to the DVR
3
LIVE
Switch to Live mode.
4
BACKUP / CAPTURE
Capture or backup the image from playback.
5
PLAYBACK BUTTONS
Control playback’s image
6
SEARCH CALENDAR
Select the data and time for playback
42
APPENDIX
1. Registering DDNS (Dynamic Domain Name Server) in Dyndns.com
A. Register your DDNS host in website ( http://www.dyndns.com )
Click here to
Create Account
43
Key in your user
Name and password
to log in your Dyndns
Tick the checkbox
Create Account
44
You will see this
confirmation page
B. Complete Registration:
Click this link to
confirmation
Click Login
45
C. Add Host Name
Click “Add Host
Services” to add
a HOST name
1
2
3
1) Key in your prefered name of your Hostname.Please note that it can be difference from your
Dyndns account User name.Recommanded to use the 'dyndns.org' extention.
2) Click on the 'Use auto detected IP address XX.XX.XXX.XXX' and you will see your WAN IP
appear in the column.
3) Click on the 'Create Host' button to proceed next step.
46
Your Hostname 'XXXXXX.dyndns.org' had been successful created
2. DDNS Settings
A. Go to SETUP>NETWORK.
B. Set DDNS as ON.
DOMAIN: Input domain name you register in dyndns web page(ex:abab12.dyndns.org)
USER NAME/PASSWORD:Same as register in dyndns web page
INTERVAL: Every 10 minute will update ip address
DDNS STATUS: show dyndns ip address status
47
3.Connect with Remote Software or IE Browser
A.open remote software,then Click “SETUP”
B. Click “Site” then select “Addition” to register
a site
C. Enter the Port no, Protocol and Password in each filed.
48
4. Input Domain Name in IE Address
49
APPENDIX 2 HDD Compatiable Table
Capacity
Model Name
HITACHI
MAXTOR
SAMSUNG
WesternDigital
Seagate
Buffer
HDS728080PLAT20
80 GB
2M
HDS721680PLAT80
80 GB
8M
HDT722516DLAT80
160 GB
8M
HDS722516DLAT80
160 GB
8M
HDT722525DLAT80
250 GB
8M
HDT725025VLAT80
250 GB
8M
HDS722525VLAT80
250 GB
8M
HDT725032VLAT80
320 GB
8M
HDP725050GLAT80
500 GB
8M
HDS725050KLAT80
500 GB
8M
HDP72505DGLA360
500GB
16M
HDS721010KLA330
1TB
32MB
6Y080L0
80 GB
2M
6B160P0
160 GB
2M
6Y200P0
250 GB
8M
6L300R0
300 GB
16 M
SP0822N
80 GB
2M
SP1604N
160 GB
2M
SP2514N/OMD
250 GB
8M
HD300LD
300 GB
8M
WD1600BB-22GUA0
160 GB
2M
WD2000BB-00GUA0
200 GB
8M
WD2500BB-00KEA0
250 GB
8M
WD2500JB
250 GB
8M
WD2500AAKS
250GB
16M
WD10EACS
1TB
16M
ST3800-12ACE
80 GB
2M
ST31200-25ACE
120 GB
2M
ST3160815AS(Barracuda) 160 GB
8M
ST3160815AV
160 GB
8M
ST3250820AV(Surveillance) 250 GB
8M
ST3250820ACE(Barracuda) 250 GB
8M
50
ST3250410AS(Barracuda) 250 GB
16 M
ST3300831ACE
300 GB
8M
ST3300820ACE
300 GB
8M
ST3300831ACE
300 GB
16 M
ST3400832ACE
400 GB
8M
ST3400820ACE
400 GB
8M
ST3400620A
400 GB
16 M
ST3500630AV(Surveillance) 500 GB
16 M
ST3500630A
500 GB
16 M
HDS725050KLAT80
500 GB
8M
ST3750840ACE
750 GB
8M
ST3750640A
750 GB
16 M
ST31000340SV
1TB
32M
51

VIRTUAL H.264 8/16 CH DVR USER GUIDE

Transcription

Similar documents

Required Information Wize Guyz Things to Remember DIRECTV

Mobile JViewer Installation Guide

4 Channel H.264 Full D1 DVR with 2 IR Cameras - Atlantis-Land

VMS STEP-BY-STEP

Odyssey DVR Spec Sheet - wistoniaelectricalservices.co.uk

1606A+ Remote Viewing Setup

8 Channel H.264 Standalone - Atlantis-Land

PRODUCT LIST

Q H.264 Quick 4/8/16 Start G 6 Chan Guide nnel DV VR