cover - Philips Parts and Accessories
Transcription
cover - Philips Parts and Accessories
DCR-TRV33/TRV33E RMT-814 SERVICE MANUAL LEVEL 2 US Model Canadian Model Korea Model Ver 1.3 2003. 11 Revision History DCR-TRV33 AEP Model UK Model North European Model East European Model Chinese Model Australian Model DCR-TRV33E Photo : DCR-TRV33 Z MECHANISM E Model Hong Kong Model Tourist Model DCR-TRV33/TRV33E Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST DISASSEMBLY SCHEMATIC DIAGRAMS • For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987622341.pdf). • For MECHANISM ADJUSTMENTS, refer to the “DV MECHANICAL ADJUSTMENT MANUAL Z MECHANISM ” (9-876-210-11). • Reference No. search on printed wiring boards is available. On the VC-313 board This service manual provides the information that is premised the circuit board replacement service and not intended repair inside the VC-313 board. Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the VC-313 board are not shown. The following pages are not shown. Schematic diagram ............................. Pages 4-37 to 4-64 Mounted parts location ............................. Page 4-95 Printed wiring board ............................ Pages 4-85 to 4-88 Electrical parts list ................................... Pages 5-21 to 5-26 Waveforms ........................................... Pages 4-91 to 4-92 DIGITAL VIDEO CAMERA RECORDER DCR-TRV33/TRV33E COVER SPECIFICATIONS Video camera recorder System Video recording system 2 rotary heads Helical scanning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal DCR-TRV33: NTSC color, EIA standards DCR-TRV33E: PAL colour, CCIR standards Usable cassette Mini DV cassette with the mark printed Tape speed SP: Approx. 18.81 mm/s LP: Approx. 12.56 mm/s Recording/playback time (using cassette DVM60) SP: 1 hour LP: 1.5 hours Fastforward/rewind time (using cassette DVM60) Approx. 2 min. and 40 seconds Viewfinder Electric viewfinder (colour) Image device 3.8 mm (1/4.7 type) CCD (Charge Coupled Device) Gross: Approx. 1 070 000 pixels Effective (still): Approx. 1 000 000 pixels Effective (moving): Approx. 690 000 pixels Lens Carl Zeiss Vario-Sonnar Combined power zoom lens Filter diameter: 30 mm (1 3/16 in) 10× (Optical), 120× (Digital) F = 1.8 – 2.0 Focal length 3.7 – 37 mm (5/32 – 1 1/2 in.)1) 50 – 500 mm (2 – 19 3/4 in.)2) 42 – 420 mm (1 11/16 – 16 5/8 in.)3) 1) When converted to a 35 mm still camera 2) In CAMERA mode 3) In MEMORY mode Colour temperature Auto, HOLD, INDOOR (3 200 K), OUTDOOR (5 800 K) Minimum illumination 7 lx (lux) (F 1.8) 0 lx (lux) (in the NightShot mode)* * Objects unable to be seen due to the dark can be shot with infrared lighting. General Power requirements 7.2 V (battery pack) 8.4 V (AC Adaptor) Average power consumption (when using the battery pack) DCR- TRV33 : 4.1 W 1) DCR- TRV33E: 4.0 W 1) DCR- TRV33 : 3.3 W 2) DCR- TRV33E: 3.2 W 2) 1) Input/Output connectors S video input /output 4-pin mini DIN Luminance signal: 1 Vp-p, 75 Ω (ohms), unbalanced Chrominance signal: DCR-TRV33: 0.286 Vp-p, DCR-TRV33E: 0.3 Vp-p, 75 Ω (ohms), unbalanced Audio/Video input /output AV MINI JACK, 1 Vp-p, 75 Ω (ohms), unbalanced 327 mV, (at output impedance more than 47 kΩ (kilohms)) Output impedance with less than 2.2 kΩ (kilohms)/Stereo minijack (ø 3.5 mm) Input impedance more than 47 kΩ (kilohms) DV input/output 4-pin connector Headphone jack Stereo minijack (ø 3.5 mm) LANC jack Stereo mini-minijack (ø 2.5 mm) USB jack mini-B MIC jack Minijack, 0.388 mV low impedance with 2.5 to 3.0 V DC, output impedance 6.8 kΩ (kilohms) (ø 3.5 mm) Stereo type LCD screen Picture 6.2 cm (2.5 type) 50.3 × 37.4 mm (2 ×1 1/2 in.) Total dot number 123 200 (560 × 220) During camera recording using LCD 2) Viewfinder Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature –20°C to + 60°C (–4°F to + 140°F) Dimensions (approx.) 71 × 90 × 112 mm (2 7/8 × 3 5/8 × 4 1/2 in.) (w/h/d) Mass (approx.) Main unit only 540 g (1 lb 2 oz) Including the rechargeable battery pack NP-FM30, cassette DVM60 and lens cap 630 g (1 lb 5 oz) Supplied accessories See page 3. AC Adaptor AC-L15A/L15B Power requirements 100 – 240 V AC, 50/60 Hz Current consumption 0.35 – 0.18 A Power consumption 18 W Output voltage DC OUT: 8.4 V, 1.5 A Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature –20°C to + 60°C (–4°F to + 140°F) Dimensions (approx.) 56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/d) excluding projecting parts Mass (approx.) 190 g (6.7 oz) excluding power cord Rechargeable battery pack NP-FM30 Maximum output voltage DC 8.4 V Output voltage DC 7.2 V Capacity 5.0 Wh (700 mAh) Dimensions (approx.) 38.2 × 20.5 × 55.6 mm (1 9/16 × 13/16 × 2 1/4 in.) (w/h/d) Mass (approx.) 65 g (2.3 oz) Operating temperature 0°C to 40°C (32°F to 104°F) Type Lithium ion “Memory Stick” Memory Flash memory 8MB: MSA-8A Operating voltage 2.7 – 3.6 V Power consumption Approx. 45 mA during operation mode Approx. 130 µA during tape recording standby Dimensions (approx.) 50 × 2.8 × 21.5 mm (2 × 1/8 × 7/8 in.) (w/h/d) Mass (approx.) 4 g (0.14 oz) Design and specifications are subject to change without notice. CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY. —2— DCR-TRV33/TRV33E • SUPPLIED ACCESSORIES Make sure that the following accessories are supplied with your camcorder. 1 2 3 4 5 6 7 8 9 q; qa qs qd qf qg 1 AC-L15A/L15B AC Adaptor (1), Power cord (1) 2 NP-FM30 rechargeable battery pack (1) 3 A/V connecting cable (1) 4 Wireless Remote Commander (1) 5 R6 (size AA) battery for Remote Commander (2) 6 Shoulder strap (1) 7 Lens cap (1) 8 Shoe cover (1) 9 “Memory Stick” (1) 0 USB cable (1) qa CD-ROM (SPVD-010 USB Driver) (1) qs Cleaning cloth (1) qd 21-pin adaptor* (1) (AEP, UK, EE, NE model only) * The models with mark printed on their bottom surfaces only. qf 2-pin conversion adaptor (1) (DCR-TRV33 : JE/TRV33E : JE only) qg 2-pin conversion adaptor (1) (DCR-TRV33 : E, HK/TRV33E : E/HK only) • Abbreviation EE : East European model NE : North European model JE : Tourist model SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. 2. 3. 4. 5. 6. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40°C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. —3— DCR-TRV33/TRV33E TABLE OF CONTENTS 1. SERVICE NOTE • CK-129 (FUNCTION SWITCH) SCHEMATIC DIAGRAM ···························· 4-21 • PD-188 (1/2)(DRIVER, TG) SCHEMATIC DIAGRAM ···························· 4-23 • PD-188 (2/2)(BACKLIGHT DRIVE) SCHEMATIC DIAGRAM ···························· 4-25 • JK-242 (A.V/DV IN/OUT) SCHEMATIC DIAGRAM ···························· 4-27 • CONTROL SWITCH BLOCK (FK-CX4000) SCHEMATIC DIAGRAM ···························· 4-29 • MA-421 (1/2)(MIC AMP) SCHEMATIC DIAGRAM ···························· 4-31 • MA-421 (2/2)(Y/P SENSOR, V/A IN/OUT) SCHEMATIC DIAGRAM ···························· 4-33 • FP-467/468/228 FLEXIBLE (S/T REEL SENSOR, TAPE SENSOR) SCHEMATIC DIAGRAM ···························· 4-35 1-1. SERVICE NOTE ····························································· 1-1 1. POWER SUPPLY DURING REPAIRS ·························· 1-1 2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) ····························································· 1-1 1-2. SELF-DIAGNOSIS FUNCTION ···································· 1-2 1. SELF-DIAGNOSIS FUNCTION ···································· 1-2 2. SELF-DIAGNOSIS DISPLAY ······································· 1-2 3. SERVICE MODE DISPLAY ·········································· 1-2 3-1. Display Method ······························································· 1-2 3-2. Backup No. ······································································ 1-2 3-3. End of Display ································································· 1-2 4. SELF-DIAGNOSIS CODE TABLE ································ 1-3 2. DISASSEMBLY 2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. 2-8. 2-9. 2-10. 2-11. 2-12. 2-13. 2-14. 2-15. 2-16. 2-17. 2-18. 2-19. 2-20. 2-21. 2-22. P CABINET (C) ASSEMBLY ········································ 2-3 CABINET (R) COVER (40E) ASSEMBLY ··················· 2-4 F PANEL SECTION ······················································· 2-5 MA-421 BOARD ···························································· 2-6 CABINET (R) SECTION ··············································· 2-7 LCD SECTION ······························································· 2-8 CK-129 BOARD,CONTROL SWITCH BLOCK (CF-CX4000) ··································································· 2-8 PD-188 BOARD, LCD UNIT ········································· 2-9 HINGE (40) ASSEMBLY ············································· 2-10 BT PANEL/EVF SECTION ·········································· 2-11 LB-085 BOARD (REMOVING OF THE EVF)- 1 ······· 2-12 LB-085 BOARD (REMOVING OF THE EVF)- 2 ······· 2-13 LB-085 BOARD (REMOVING OF THE EVF)- 3 ······· 2-14 VA-118 BOARD, LENS SECTION ······························ 2-15 CD-431 BOARD ··························································· 2-16 MECHANISM DECK, VC-313 BOARD (1) ··············· 2-16 MECHANISM DECK, VC-313 BOARD (2) ··············· 2-17 CABINET (G) ASSEMBLY (40E) ······························· 2-17 CONTROL SWITCH BLOCK (FK-CX4000) ·············· 2-18 JK-242 BOARD ···························································· 2-18 CIRCUIT BOARDS LOCATION ································· 2-20 FLEXIBLE BOARDS LOCATION ······························ 2-21 3. BLOCK DIAGRAMS 3-1. 3-2. 3-3. 3-4. 3-5. 3-6. OVERALL BLOCK DIAGRAM (1/4) ··························· 3-1 OVERALL BLOCK DIAGRAM (2/4) ··························· 3-3 OVERALL BLOCK DIAGRAM (3/4) ··························· 3-5 OVERALL BLOCK DIAGRAM (4/4) ··························· 3-7 POWER BLOCK DIAGRAM (1/2) ································ 3-9 POWER BLOCK DIAGRAM (2/2) ······························ 3-11 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Shematic diagram of the VC-313 board are not shown. Pages from 4-37 to 4-64 are not shown. 4-3. PRINTED WIRING BOARDS • CD-431 (CCD IMAGER) PRINTED WIRING BOARD ······················· 4-67 • LB-085 (EVF, BACK LIGHT) PRINTED WIRING BOARD ······················· 4-69 • FP-467/468/228 FLEXIBLE BOARD (S/T REEL SENSOR, TAPE SENSOR) ····················· 4-71 • FP-626 FLEXIBLE BOARD ····································· 4-71 • VA-118 (RGB DRIVE, TG, HI CONTROL, Y/P SENSOR AMP, CONNECTOR, DC/DC COVERTER, POWER IN, CHARGE) PRINTED WIRING BOARD ······················· 4-73 • CK-129 (FUNCTION SWITCH) PRINTED WIRING BOARD ······················· 4-77 • PD-188 (DRIVER, TG, BACKLIGHT DRIVE) PRINTED WIRING BOARD ······················· 4-79 • JK-242 (A.V/DV IN/OUT) PRINTED WIRING BOARD ······················· 4-81 • MA-421 (MIC AMP, Y/P SENSOR, V/A IN/OUT) PRINTED WIRING BOARD ······················· 4-83 Printed wiring board of the VC-313 board are not shown. Pages from 4-85 to 4-88 are not shown. 4-4. WAVEFORMS ······························································ 4-89 Waveforms of the VC-313 board are not shown. Pages 4-91 and 4-92 are not shown. 4-1. FRAME SCHEMATIC DIAGRAM (1/3) ······················· 4-1 FRAME SCHEMATIC DIAGRAM (2/3) ······················· 4-3 FRAME SCHEMATIC DIAGRAM (3/3) ······················· 4-5 4-2. SCHEMATIC DIAGRAMS • CD-431 (CCD IMAGER) SCHEMATIC DIAGRAM ······························ 4-9 • LB-085 (EVF, BACK LIGHT) SCHEMATIC DIAGRAM ···························· 4-10 • VA-118 (1/5)(RGB DRIVE, TG) SCHEMATIC DIAGRAM ···························· 4-11 • VA-118 (2/5)(HI CONTROL) SCHEMATIC DIAGRAM ···························· 4-13 • VA-118 (3/5)(Y/P SENSOR AMP, CONNECTOR) SCHEMATIC DIAGRAM ···························· 4-15 • VA-118 (4/5)(DC/DC COVERTER) SCHEMATIC DIAGRAM ···························· 4-17 • VA-118 (5/5)(POWER IN, CHARGE) SCHEMATIC DIAGRAM ···························· 4-19 4-5. MOUNTED PARTS LOCATION ································· 4-93 Mounted parts location of the VC-313 board is not shown. Page 4-95 is not shown. 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS ······················································ 5-1 5-1-1. OVERALL SECTION ····················································· 5-3 5-1-2. F PANEL SECTION ······················································· 5-4 5-1-3. MAIN CHASSIS SECTION ··········································· 5-5 5-1-4. LENS SECTION ····························································· 5-6 5-1-5. CABINET L SECTION ·················································· 5-7 5-1-6. BT PANEL/EVF SECTION ············································ 5-8 5-1-7. CABINET R SECTION ·················································· 5-9 5-1-8. LCD SECTION ····························································· 5-10 5-1-9. OVERALL (MECHANISM DECK-Z100) ··················· 5-11 5-1-10. LS CHASSIS BLOCK ASSEMBLY ························· 5-12 —4— DCR-TRV33/TRV33E 5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY ··· 5-13 5-2. ELECTRICAL PARTS LIST ········································ 5-13 Parts list of the VC-313 board are not shown. Pages from 5-21 to 5-26 are not shown. —5— DCR-TRV33/TRV33E SECTION 1 SERVICE NOTE COVER 1-1. SERVICE NOTE 1. POWER SUPPLY DURING REPAIRS In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate. This following two methods are available to prevent this. Take note of which to use during repairs. Method 1. Use the AC power adaptor (AC-L15, AC-VQ800 etc.). Method 2. Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side. 2. 1 2 3 4 5 6 7 8 9 TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) Refer to 2-2 to remove the cabinet (R) cover (40E). Refer to 2-3 to remove the F panel section. Refer to 2-5 to remove the cabinet (R) section. Refer to 2-10 to remove the BT panel/EVF section. Refer to 2-14 to remove the VA-118 board and Lens section. Refer to 2-16 to remove the VC-313 board and Mechanism deck. Refer to 2-17 to remove the MD frame assembly from the VC-313 board and Mechanism deck. Disconnect the flexible board from CN2502 of VC-313 board. Supply +4.5V from the DC power supply to the loading motor and unload with a pressing the cassette compartment. Disconnect the flexible board from CN2502 of VC-313 board. Loading motor DC power supply (+4.5Vdc) CN2502 VC-313 board 1-1 DCR-TRV33/TRV33E 1-2. SELF-DIAGNOSIS FUNCTION 1. SELF-DIAGNOSIS FUNCTION 2. When problems occur while the unit is operating, the self-diagnosis function starts working, and displays on the viewfinder, or LCD screen what to do. Details of the self-diagnosis functions are provided in the Instruction manual. SELF-DIAGNOSIS DISPLAY When problems occur while the unit is operating, the counter of the viewfinder or LCD screen consists of an alphabet and 4-digit number, which blinks at 3.2Hz. This 5-character display indicates the “repaired by:”, “block” in which the problem occurred, and “detailed code” of the problem. Viewfinder or LCD screen C:31:11 Blinks at 3.2Hz C Repaired by: C : Corrected by customer H : Corrected by dealer E : Corrected by service engineer 31 11 Detailed Code Block Refer to page 1-3. Indicates the appropriate Self-diagnosis Code Table. step to be taken. E.g. 31 ....Reload the tape. 32 ....Turn on power again. Note: The “self-diagnosis display” data will be kept even if the lithium battery (BT5201 of CK-129 board) is removed. 1-2 DCR-TRV33/TRV33E Ver 1.3 2003. 11 3. SELF-DIAGNOSIS CODE TABLE Repaired by: Self-diagnosis Code Block Detailed Function Code Symptom/State Correction C C C C 0 2 2 3 4 1 2 1 0 0 0 1 0 0 0 0 C 3 1 1 1 C C 3 3 1 1 2 2 0 1 C C C C C C 3 3 3 3 3 3 1 1 1 1 1 1 2 2 2 3 4 4 2 3 4 0 0 2 C 3 2 1 0 C 3 2 1 1 C 3 2 2 0 C 3 2 2 1 Non-standard battery is used. Condensation. Video head is dirty. LOAD direction. Loading does not complete within specified time UNLOAD direction. Loading does not complete within specified time T reel side tape slacking when unloading. Winding S reel fault when counting the rest of tape. T reel fault. S reel fault. T reel fault. FG fault when starting capstan. FG fault when starting drum. FG fault during normal drum operations. LOAD direction loading motor timeout. UNLOAD direction loading motor time-out. T reel side tape slacking when unloading. Winding S reel fault when counting the rest of tape. C 3 2 2 2 T reel fault. C 3 2 2 3 S reel fault. C 3 2 2 4 T reel fault. C 3 2 3 0 FG fault when starting capstan. C 3 2 4 0 FG fault when starting drum C 3 2 4 2 FG fault during normal drum operations E 6 1 0 0 Difficult to adjust focus (Cannot initialize focus.) E 6 1 1 0 Zoom operations fault (Cannot initialize zoom lens.) E 6 2 0 0 E 6 2 0 1 Steadyshot function does not work well. (With pitch angular velocity sensor output stopped.) Steadyshot function does not work well. (With yaw angular velocity sensor output stopped.) 1-3E Use the info LITHIUM battery. Remove the cassette, and insert it again after one hour. Clean with the optional cleaning cassette. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Remove the battery or power cable, connect, and perform operations from the beginning. Inspect the lens block focus MR sensor (Pin ql, w; of CN1301 of VC-313 board) when focusing is performed when the focus buttons of the touch panel are pressed in the focus manual mode, and the focus motor drive circuit (IC1301 of VC-313 board) when the focusing is not performed. Inspect the lens block zoom MR sensor (Pin 8, 0 of CN1301 of VC-313 board) when zooming is performed when the zoom lens is operated and the zoom motor drive circuit (IC1301 of VC-313 board) when zooming is not performed. Inspect pitch angular velocity sensor (SE5402 of MA-421 board) peripheral circuits. Inspect yaw angular velocity sensor (SE5401 of A-421 board) peripheral circuits. DCR-TRV33/TRV33E SECTION 2 DISASSEMBLY COVER HELP The following flow chart shows the disassembly procedure. DISASSEMBLY PD-188 board service position DISASSEMBLY HELP DISASSEMBLY SERVICE POSITION TO CHECK THE VTR SECTION DISASSEMBLY HELP DISASSEMBLY DISASSEMBLY HELP DISASSEMBLY DISASSEMBLY HELP DISASSEMBLY HELP PROCEDURE OF REMOVING THE MECHANISM DECK. (VTR CHECK SERVICE POSITION) 1 2 3 4 5 6 7 8 9 0 qa 2-2. CABINET (R) COVER (40E) ASSEMBLY ........ (page 2-4) 2-3. F PANEL SECTION ........................................ (page 2-5) 2-5. CABINET (R) SECTION ................................... (page 2-7) 2-10. BT PANEL/EVF SECTION ........................... (page 2-11) 2-14. VA-118 BOARD, LENS SECTION ................ (page 2-15) 2-16. MECHANISM DECK, VC-313 BOARD (1) .... (page 2-16) 2-17. MECHANISM DECK, VC-313 BOARD (2) .... (page 2-17) 2-18. CABINET (G) ASSEMBLY (40E) ................... (page 2-17) 2-19. CONTROL SWITCH BLOCK (FK-CX4000).... (page 2-18) 2-20. JK-242 BOARD ............................................. (page 2-18) SERVICE POSITION TO CHECK THE VTR SECTION................................................ (page 2-19) 2-1 DCR-TRV33/TRV33E NOTE: Follow the disassembly procedure in the numerical order given. [CONNECTION OF EQUIPMENT] LANC jack AC IN AC power adaptor Adjustment remote commander (RM-95) DC-IN connector CPC lid CPC-7 jig (J-6082-382-A) Screw (M1.7 × 4), lock ace, p2 2-2 DCR-TRV33/TRV33E 2-1. P CABINET (C) ASSEMBLY 4 Turn the LCD panel 2 Turn the LCD panel Caution Rotation of the LCD panel has limitation due to its hinge in this model. Excessive force to rotate the LCD panel damages the hinge. Follow the precaution below. Opening and closing of LCD panel must be performed only in the state that the LCD panel is completely in parallel (perpendicular) with the main body of the recorder. 1 Open the LCD panel 3 Screw (M1.7 × 4), lock ace, p2 5 Screw (M1.7 × 4), lock ace, p2 7 Four claws 8 P cabinet (C) assembly P D -1 8 8 When you want to rotate the LCD panel, rotate it after the LCD panel is opened in its fully opened position. 6 Two tapping screws (M1.7 × 5) [PD-188 BOARD SERVICE POSITION] Adjustment remote commander (RM-95) PD-188 board P D -1 8 8 AC power adaptor CPC-7 jig (J-6082-382-A) 2-3 AC IN DCR-TRV33/TRV33E 2-2. CABINET (R) COVER (40E) ASSEMBLY 5 Raise the Finder in the direction of the arrow 1 Two screws (M1.7 × 6), lock ace, p2 6 Screw (M1.7 × 3), lock ace, p2 4 Two screws (M1.7 × 3), lock ace, p2 3 Open the LCD panel Caution When remove the Cabinet R cover (39E) to the main body, remove the Cabinet (R) cover (40E) assembly while raising, so that A marked portion must not be damaged. 2 Screw (M1.7 × 3), lock ace, p2 Caution Insert the projected portion of the Cabinet (R) cover (40E) assembly into the cabinet L side of the the chassis. A The projected portion The chassis The cabinet L side 9 Remove the projected part q; Push the Cabinet (R) cover (40E) assembly in the direction of the arrow to remove the three claws. 8 Remove the projected part 7 Close the LCD panel qa Pull out the Cabinet (R) cover (40E) assembly from the main body. Claws 2-4 DCR-TRV33/TRV33E 2-3. F PANEL SECTION 1 Screw (M1.7 × 4), lock ace, p2 3 Open the Cassette lid 4 Screw (M1.7 × 4), lock ace, p2 2 Screw (M1.7 × 4), lock ace, p2 6 Remove the claw 7 Remove the F panel section in the direction of the arrow 5 Two screws (M1.7 × 4), lock ace, p2 8 FP-621 flexible board (36P) Caution The FP-621 flexible board may be damaged if you remove the F panel section forcibly. Be very careful not to damage the flexible board. 2-5 DCR-TRV33/TRV33E 2-4. MA-421 BOARD 8 Remove the MA-421 board in the way of twisting it in the direction of the arrow 9 HP sheet 6 Microphone 5 Microphone retainer 3 Microphone (4P) 4 Tapping screw (M1.7 × 5) 2 MA cover, MA cover cushion q; MA-421 board 7 Two tapping screws (M1.7 × 5) Caution When installing the MA-421 board, attach the HP sheet so that the metal terminals of the headphones jack are hidden (insulated) by the HP sheet. Metal terminal part Headphone jack HP sheet 2-6 1 Three tapping screws (M1.7 × 5) DCR-TRV33/TRV33E 2-5. CABINET (R) SECTION 2 Screw (M1.7 × 4), lock ace, p2 1 Screw (M1.7 × 4), lock ace, p2 3 Two screws (M1.7 × 4), lock ace, p2 4 Three screws (M1.7 × 4), lock ace, p2 6 FP-618 flexible board (16P) 5 Remove the Cabinet R section in the direction of the arrow Caution When install the Cabinet R section to the main body, install the FP-618 flexible board as shown in the illustration. 7 Herness (PV-140) (20P) 2-7 DCR-TRV33/TRV33E 2-6. LCD SECTION Caution Attach the Tape (A) as shown in the illustration. 6 LCD section 5 Cabinet R section 4 Two tapping screws (M1.7 × 5) Tape (A) 2 Harness (PV-140) (4P) 3 FP-626 flexible board (6P) 1 Tape (A) 2-7. CK-129 BOARD,CONTROL SWITCH BLOCK (CF-CX4000) 3 Control switch block (CF-CX4000) 2 Screw (M1.7 × 2.5), lock ace, p2 1 Control switch block (CF-CX4000) (6P) 6 Loud speaker (1.6CM) 5 Speaker retainer assembly 8 Cabinet (R) assembly 4 Two tapping screws (M1.7 × 3.5) q; CK-129 board 7 Two tapping screws (M1.7 × 3.5) 9 FP-618 flexible board (16P) 2-8 DCR-TRV33/TRV33E 2-8. PD-188 BOARD, LCD UNIT 3 Four claws 2 Two screws (M1.7 × 4), lock ace, p2 4 P cabinet (C) assembly (M) Caution P D -1 8 8 When remove the Harness (PV-140), be careful to damage the Harness (PV-140). 5 Harness (PV-140) (20P, 40P) 1 Two tapping screw (M1.7 × 5) qj PD-188 board qa Screw (M1.7 × 2.5), lock ace, p2 8 -18 PD 6 Dowel 7 Two claws qf Back light (10P) qh Panel frame (40) qg Back light qs Liquid crystal indicator module (24P, 6P) qd Liquid crystal indicator module q; LCD cushion (T) 9 LCD insulating sheet (40) 8 P cabinet (M) (40) assembly 2-9 DCR-TRV33/TRV33E 2-9. HINGE (40) ASSEMBLY Caution Rotation of the LCD panel has limitation due to its hinge in this model. Excessive force to rotate the LCD panel damages the hinge. (Refer to "Caution"of 2.1 P cabinet assembly.) 2 A 2 Rotate to the "A" marked portion 1 Screw counterclockwise by 90 degrees (M1.7 × 4), lock ace, p2 Caution If the FP-626 flexible board is removed once, the adhesion strength of a double-sided tape decreases. Use the new FP-626 flexible board at the time of an assembly. 8 Remove the FP-626 flexible board that is attached by the doble-sided tape 7 Hinge cover (M) (40) 3 Dowel for setting the position B 4 Three claws 6 Screw (M1.7 × 4), lock ace, p2 3 3 Rotate the "B" marked portion counterclockwise by 90 degrees in the direction of the arrow Hinge (40) assembly 5 Hinge cover (C) (40) q; Hinge (40) assembly Remove the Harness (PV-140) in the direction of the arrow 9 Harness (PV-140) Bend the Harness (PV-140) along with connector 2-10 DCR-TRV33/TRV33E 2-10. BT PANEL/EVF SECTION 5 BT panel/EVF section 1 Screw (M1.7 × 4), lock ace, p2 4 FP-619 flexible board (20P) 2 Two screws (M1.7 × 4), lock ace, p2 3 Battery terminal board (3P) 2-11 DCR-TRV33/TRV33E 2-11. LB-085 BOARD (REMOVING OF THE EVF)- 1 Caution When installing the EVF flexible retainer, please be sure to install it while the viewfinder is kept pushed up to attach. Finder 1 EVF flexible retainer Caution When installing, pass the FP-619 flexible board through the hole of the VF hinge assembly as shown in the illustration. FP-619 flexible board EVF flexible retainer When installing the EVF flexible retainer, fold the FP-619 flexible board as shown in the illustration. VF hinge assembly FP-619 flexible board 2 Raise the Finder in the direction of the arrow 6 VF hinge 4 Screw (M1.7 × 2.5), assembly lock ace, p2 5 Three screws (M1.7 × 4), lock ace, p2 3 Two screws (M1.7 × 2.5), lock ace, p2 9 Screw (M1.7 × 2.5), lock ace, p2 q; Eye cup (40) assembly 7 VF tilt cabinet 8 Screw (M1.7 × 2.5), lock ace, p2 2-12 DCR-TRV33/TRV33E 2-12. LB-085 BOARD (REMOVING OF THE EVF)- 2 5 Visibility knob (40) VF slide cabinet (upper) assembly To raise the VF slide cabinet (upper) assembly, insert a flat head (-) screwdriver into the position shown by the arrow. 6 B VF slide cabinet (upper) assembly 2 C A 2 A VF slide cabinet (lower) 1 Tapping screw (M1.7 × 3.5) 4 2 Open the lock of the VF slide cabinet (lower) in the direction of the arrow A, 3 release the two claws of the VF slide cabinet (upper) assembly, 4 while slanting the VF slide cabinet (upper) in the direction of the arrow B, 5 remove the Visibility knob (40) from the VF slide cabinet (lower), and 6 remove the VF slide cabinet (upper) assembly by sliding it in the direction of the arrow C. 3 Two claws VF slide cabinet (lower) RE-ASSEMBLING THE VF SLIDE CABINET 1 VF slide assembly 2 Align the dotted portion of the VF slide assembly with the dotted line of the VF slide cabinet (lower). VF slide cabinet (lower) When re-assembling, slide the Visibility knob (40) to the fully right-end beforehand. Visibility knob (40) When re-assembling is completed, the VF slide cabinet (upper) assembly and the VF slide cabinet (lower) are assembled as shown. 3 Slide the VF slide cabinet assembly up to the position in the direction of the arrow where the two claws are locked. VF slide cabinet (upper) assembly 4 Tapping screw (M1.7 × 3.5) VF slide cabinet (lower) VF slide cabinet (lower) Two claws 2-13 DCR-TRV33/TRV33E 2-13. LB-085 BOARD (REMOVING OF THE EVF)- 3 1 Two screws (M1.7 × 2.5), lock ace, p2 2 Pull out the VF slide assembly fully in the direction of the arrow. VF slide Cabinet (upper) assembly VF slide assembly, etc. A 3 Slide the VF slide cabinet assembly and others once to the deep end, then slant them in the direction of the arrow A to release the claw portion of the VF slide assembly and finally pull them out in the direction of the arrow B and remove them. B 6 Remove the LCD cabinet assembly and others from the two dowels and cut-outs of the VF slide assembly. Caution When attach the Sheet (VF), fold the FP-619 flexible board as shown in the illustration. FP-619 flexible board Sheet (VF) 5 Screw (M1.7 × 2.5), lock ace, p2 4 Screw (M1.7 × 2.5), lock ace, p2 Cut-outs VF slide assembly Two dowels qa Lamp guide (40) 7 Sheet (VF) q; Cushion LB (40) Two craws qg LCD cabinet assembly qf LCX032AN-5 8 FP-619 flexible board qd Prism sheet (40) Two craws qs Illuminator (40) 9 LB-085 board Projected part 2-14 DCR-TRV33/TRV33E 2-14. VA-118 BOARD, LENS SECTION Caution Caution Fold the harness of the control switch block (FK-CX4000) toward the board as shown in the illustration. When attach the Tape (A), fold the FP-620 flexible board as shown in the illustration. Tape (A) FP-620 flexible board Harness of the Control switch block (FK-CX4000) 1 Control switch block (FK-CX4000) (3P) 4 FP-620 flexible board (10P) 8 FP-624 flexible board (22P) 7 Screw (M1.7 × 2.5), lock ace, p2 3 B to B connector (100P) 6 Screw (M1.7 × 2.5), lock ace, p2 q; Lens section 5 VA-118 board, FP-621 flexible board 9 Lens device LSV-751A (27P) 2 Two screws (M1.7 × 2.5), lock ace, p2 Caution When attach the Tape (A), fold the flexible board of the Lens device 751A as shown in the illustration. Lens device LSV-751A Tape (A) 2-15 DCR-TRV33/TRV33E 2-15. CD-431 BOARD qs CD-431 board 3 Lens frame (39) assembly 6 Two tapping screws (M1.7 × 5) 9 Seal rubber (W) q; CCD block assembly 2 Two tapping screws (M1.7 × 3.5) 8 optical filter block 5 FP-624 flexible board, Sheet (CD) radiation qa Remove soldering 7 Lens device LSV-751A Caution Attach the Flexible protection sheet (M) shown in the illustration. 4 CD heet sink, CD radiation sheet, Sheet (S) 1 Flexible protection sheet (M) Flexible protection sheet (M) 2-16. MECHANISM DECK, VC-313 BOARD (1) 3 Control switch block (FK-CX4000) (12P) 4 FP-630 flexible board (8P) 6 Screw (M1.7 × 2.5), lock ace, p2 9 Open the cassette lid 7 Screw (M1.7 × 2.5), lock ace, p2 5 FP-625 flexible board (16P) qa Screw q; Screw (M1.7 × 4), lock ace, p2 8 Screw (M1.7 × 2.5), lock ace, p2 2-16 qs Mechanism deck, VC-313 board 1 Screw (M1.7 × 2.5), lock ace, p2 2 VC heat sink, VC radiation sheet DCR-TRV33/TRV33E 2-17. MECHANISM DECK, VC-313 BOARD (2) 1 Flexible board (from the capstan motor) (27P) 2 Flexible board (from the FP-468 flexible board) (27P) 5 Flexible board (from the drum motor) (10P) 6 Flexible board (from the video head) (10P) 4 Craw 7 VC-313 board q; Mechanism deck 9 MD frame assembly 8 Four screws (M1.4 × 1.5) 3 Two screws (M1.7 × 2.5), lock ace, p2 2-18. CABINET (G) ASSEMBLY (40E) 4 Cabinet (G) assembly (40E) 1 Four tapping screws (M1.7 × 3.5) Tapping screw (M1.7 × 3.5) Screw (M1.7 × 2.5), lock ace, p2 3 Two screws (M1.7 × 2.5), lock ace, p2 2 Two screws (M1.7 × 2.5), lock ace, p2 2-17 DCR-TRV33/TRV33E 2-19. CONTROL SWITCH BLOCK (FK-CX4000) Caution 4 FK flexible retainer When installing, fix the flexible board of the Control switch block (FK-CX4000) with the FK flexible retainer as shown in the illustration. 7 Control switch block (FK-CX4000) FK flexible retainer 5 Screw (M1.7 × 4), lock ace, p2 Flexible board 2 Screw (M1.7 × 4), lock ace, p2 1 Screw (M1.7 × 4), lock ace, p2 Caution Flexible cover 3 Pull and remove the Cabinet L assembly (40E), shoe frame, etc. When installing, pass harness of the Control switch block (FK-CX4000) the through the Flexible cover by the marked A. A Flexible cover 6 Remove the Harness of the control switch block (FK-CX4000) from the Flexible cover Harness 2-20. JK-242 BOARD 2 Two screws (M1.7 × 2.5), lock ace, p2 3 JK-242 board, FP-625 flexible board Caution Install the Sheet Z as shown in the illustration. Sheet Z 1 Sheet Z 2-18 DCR-TRV33/TRV33E [SERVICE POSITION TO CHECK THE VTR SECTION] Connection to Check the VTR Section To check the VTR section, set the VTR to the “Forced VTR power ON” mode. Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position). Setting the “Forced VTR Power ON” mode Exiting the “Forced VTR Power ON” mode 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 0, address: 10, and set data: 00. 3) Select page: D, address: 10, set data: 02, and press the PAUSE button of the adjustment remote commander. 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 0, address: 10, and set data: 00. 3) Select page: D, address: 10, set data: 00, and press the PAUSE button of the adjustment remote commander. 4) Select page: 0, address: 01, and set data: 00. (To eject the cassette, short the circuit between Pin 4 of IC4101 and GND pattern on VA-118 board for 1 second.) Monitor TV Adjustment remote commander (RM-95) JK-242 board 4 2 Mechanism deck JK -2 AUDIO/VIDEO jack LANC jack MA-421 board F panel section Extension cable (100P) (J-6082-352-A) CN1002 C -3 1 3 CN5402 V Need not be connected CN4002 CN1004 8 1 V A -1 VC-313 board 8 CN4602 To eject the cassette, short the circuit between Pin 4 of IC4101 and GND pattern on VA-118 board for 1 second. 1 9 VA-118 board 16 DC-IN jack 40 16 CN4004 1 IC4101 CPC-7 jig (J-6082-382-A) Power harness 21 20 41 IC4101 4 Control switch block (FK-CX4000) (J-6082-382-A) 1 60 61 80 AC power adaptor AC IN GND pattern PROCEDURE OF REMOVING THE MECHANISM DECK. (VTR CHECK SERVICE POSITION) 1 2-3. CABINET (R) COVER (39E) ASSEMBLY ........ (page 2-4) 2 2-4. F PANEL SECTION ........................................ (page 2-5) 3 2-6. CABINET (R) SECTION ................................... (page 2-7) 4 2-10. BT PANEL/EVF SECTION ........................... (page 2-11) 5 2-14. VA-118 BOARD, LENS SECTION ................ (page 2-15) 6 2-16. MECHANISM DECK, VC-313 BOARD (1) .... (page 2-16) 2-19 7 2-17. MECHANISM DECK, VC-313 BOARD (2) .... (page 2-17) 8 2-18. CABINET (G) ASSEMBLY (40E) ................... (page 2-17) 9 2-19. CONTROL SWITCH BLOCK (FK-CX4000).... (page 2-18) 0 2-20. JK-242 BOARD ............................................. (page 2-18) DCR-TRV33/TRV33E 2-21.CIRCUIT BOARDS LOCATION LB-085 JK-242 CD-431 VC-313 VA-118 MA-421 CK-129 PD-188 NAME CD-431 CK-129 JK-242 LB-085 MA-421 PD-188 VA-118 VC-313 FUNCTION CCD IMAGER FUNCTION SWITCH RELAY EVF, BACKLIGHT MIC AMP, Y/P SENSOR, V/A IN/OUT RGB DRIVE, TIMING GENE, BACKLIGHT RGB DRIVE, HI CONTROL, Y/P SENSOR AMP, POWER IN, CHARGE, CONNECTOR CAMERA A/D CONV., TIMING GENERATOR, LENS DRIVE, MPEG/DV STILL PROCESSOR, SERVO, AUDIO, CAMERA/MECHA/HI CONTROL, CONNECTOR 2-20 DCR-TRV33/TRV33E 2-22.FLEXIBLE BOARDS LOCATION The flexible boards contained in the mechanism deck and that in the lens device are not shown. CONTROL SWITCH BLOCK (FK-CX4000) FP-620 CONTROL SWITCH BLOCK (CF-CX4000) FP-618 FP-621 FP-630 FP-624 FP-626 FP-619 FP-625 2-21E DCR-TRV33/TRV33E 10/Feb/2003. Update HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. OVERALL SECTION -1 FK flexible retainer Flexible board FP-618 flexible board FP-620 flexible board Tape (A) Tape (A) VC-313 board VA-118 board Flexible board of the Lens device LSV-751A VA-118 board VA-118 board Harness of the Control switch block (FK-CX4000) RF sheet VA-118 board HELP DCR-TRV33/TRV33E OVERALL SECTION -2 Flexible cover Harness CABINET R SECTION Tape (A) BT PANEL/EVF SECTION FP-619 flexible board VF hinge assembly EVF flexible retainer Sheet (VF) HELP FP-619 flexible board FP-619 flexible board FP-619 flexible board Sheet (VF) DCR-TRV33/TRV33E LENS SECTION F PANEL SECTION HP, sheet Headphone jack MA-421 boarf Flexible protection sheet (M) CABINET L SECTION Z sheet HELP DCR-TRV33/TRV33E COVER 3. BLOCK DIAGRAMS Link OVERALL BLOCK DIAGRAM (1/4) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (2/4) POWER BLOCK DIAGRAM (2/2) OVERALL BLOCK DIAGRAM (3/4) OVERALL BLOCK DIAGRAM (4/4) DCR-TRV33/TRV33E SECTION 3 BLOCK DIAGRAMS COVER ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-1. OVERALL BLOCK DIAGRAM (1/4) CD-431 BOARD 3. BLOCK DIAGRAMS VC-313 BOARD(1/4) JK-242 BOARD(2/3) LENS ASSY (2/14) IRIS (SHUTTER) IC5101 IC5102 11 8 S/H IMAGER CCD IMAGER 5 • 4 3 • 2 CN5101 V1-V4 RG,H1,H2 15-18 48 IC1901 Y OUT 20 3 | 1 44 AD0-AD13 AD0-AD13 1 | 57 13-11 19 20 16 44 45 223 | 4 12 11 6 10-12 IFI C0-C3 CLPOB 70 280 121 | 281 227 65 IC1901 Y OUT 33 34 (1/14) 27 X1501 66MHz : TRV33 54MHz : TRV33E HD,VD,FLD HD,VD,FLD 34 MPEG MOVIE PROCESS 24 21 9 1 2 13 47 10 XCHCK ADCK PBLK 13 41 265 72 139 EXT STROBO CAM SO,SI,SCK 86 169 A0-A13 154 44 IC1302 IRIS HALL +,- FOCUS/ ZOOM/ IRIS/ ND FILTER CONTROL 36 2 37 5 12 ND FILTER METER 13 IRIS DRIVE 19 ND FILTER DRIVE 7 20 40 96 D0-D15 ND HALL 20 26 2 13 11 29 35 42 53 15 ND PWM 8 ND EN 16 9 2 ZOOM MOTOR DRIVE 4 10 15 11 EN PWM 12 ZN EN 12 13 152 189 55 153 190 109 155 192 REC CK RF IN HY1 PLL 27IN FRRV TRRT TRRV ADATAIN0 ADATAIN1 60 12 58 168 SFD BCK SWP FRRV TRRT TRRV 111 167 2 TO OVERALL BLOCK DIAGRAM (3/4) (PAGE 3-5) SPCK 114 126 EVF R EVF G EVF B MC BUS 112 127 ADATAOUT0 ADATAOUT1 MC BUS SWP FRRV TRRT TRRV 157 21 VSP SO,SI,SCK VSP SO,SI,SCK 3 VD SO,SCK EVF HD EVF VD PANEL R PANEL G PANEL B 63 65 45 VD SO,SCK 71 EVF HD EVF VD 73 84 82 74 PANEL R PANEL G PANEL B PANEL HD PANEL VD 3 77 (4/14) AD4-AD13 IC1901 C OUT IC1901 C OUT ADCK 18 SPCK (IC2101) (PAGE 3-3) 29 XNS SW IC2703 136 (1/2) 1 3 77 78 CAM SO,SI,SCK 75 73 (3/5) MS BS,DIO,SCLK CH SO,SCK 71 19 18 12 18 19 8 IC4301 YAW/PITCH SENSOR AMP 18 85 85 2 87 87 YAW AD 130 135 129 175 MS BS MS DIO MS SCLK CN4004 (1/2) 184 DIGITAL STILL CONTROL 187 82 89 87 USB CLK DSCK LK DIGITAL STILL PROCESS 119 DATA FROM SFD DATA TO SFD 151 152 215 VSP SO,SI,SCK 150 JK-242 BOARD(3/3) | 213 A1-A20 62 88 D0-D15 60 A1-A19 39 D0-D15 116 98 121 137 A1-A20 (13/14) DATA TO SFD D0-D15 SFD BCK 1 EXT STROBO 19 (PAGE 3-8) CN5303 CN5301 USB D+,D- 27 24 32 2 26 12 39 49 9 16 1 48 29 2 3 3 8 IC2901 15 D/A CONV. A/D CONV. 3 16 L R 64 L 12 2 58 IC3001 38 28 7 45 17 15 IC2801 USB D+,D- 16Mbit SDRAM (6/14) IC2803 16Mbit FLASH MEMORY (6/14) AUDIO L I/O R AUDIO R I/O 35 96 95 MIC L MIC R 91 88 32 CN1002 MS BS,DIO,SCLK 6 AUDIO SIGNAL VIDEO SIGNAL VIDEO/AUDIO SIGNAL 3-1 L V R CN5303 43 CN1006 4 14 42 HP L HP R 2 MS BS,DIO,SCLK 16 14 R JK-242 BOARD(1/3) CN201 12 16 L SP+ SP- (USB) FP-630 (FLEXIBLE) 12 CN1001 30 AUDIO I/O L 27 26 56 R VIDEO I/O 3 (13/14) 62 36 CN1001 2 9 9 ZOOM VR AD V SFD BCK CN1002 TO OVERALL BLOCK DIAGRAM (4/4) C 42 299 AUDIO SIGNAL PROCESS DATA FROM SFD CN4002 S.C I/O Y 39 48 2 PITCH AD S.Y I/O CN1002 36 ADATAOUT0 298 ADATAOUT1 IC2704 238 100 V 22 IC901 Y OUT 302 99 C 14 ADATAIN0 301 ADATAIN1 (5/14) (5/14) 239 USB D+,DHALL AD 128 CAMERA CONTROL SE5402 IC2705 ND HALL IC2601 SE5401 4 Y 18 VIDEO IN/OUT AGC ACC 4 2 XTAL OSC (12/14) IC1901 34 1 CN1301 VA-118 BOARD(1/4) 7 10 (10/14) 46 IC1901 C OUT X2701 48MHz X2601 20MHz IC2101 Y OUT IC2101 C OUT 60 (5/14) 3 52 41 USB I/F 6 53 10 24 5 60 17 9 53 28 DO-D15 61 NIGHT SHOT 245 156 ZMR A,B 8 33 VIDEO A/D CONV. 158 (3/14) ZOOM MOTOR TO OVERALL BLOCK DIAGRAM (2/4) (VA-118) | 261 USB D+,D- MEMORY STICK EVF R EVF G EVF B 61 PANEL HD PANEL VD CAM SO,SI,SCK IC1301 CN5402 REC DT REC CK 80 FC PWM 14 FC EN 9 FOCUS MOTOR DRIVE 21 ZOOM +,- 25 YAW SENSOR 37 252 23 FOCUS +,- 24 PITCH SENSOR 39 DV Interface IC2103 64Mbit SDRAM 27 MA-421 BOARD(1/3) 40 | 9 10 93 FMR A,B 26 MR 215 198 19 M 95 9 10 REC DT 52 | 170 IR PWM 10 IR EN 14 17 13 M FOCUS MOTOR ND DRIVE +,- 14 MR A0-A13 92 ND HALL +,- 16 H 41 HALL AD 6 DO-D15 6 M 185 45 3 H 46 A0-A10, A12 IRIS DRIVE +,- HY1 PLL 27IN 139 133 107 166 SPCK D0-D15 102 47 M 123 125 168 7 6 47 RF IN 54 73 276 76 CN5303 7 14 124 13 121 45 RCI0-RCI3,DE4-DE7 16 (3/14) 4 RYI0-RYI3,DE0-DE3 275 284 CN1001 42 TRCK0 29 264 15 TPA NTPA TPB NTPB 187 104 122 272 DV SIGNAL PROCESS 95 | 6 DV INTERFACE | LBUS0-LBUS3 150 9 71 267 230 IC2201 45 186 282 266 229 CHCK 44 12 9 61 RCO0-RCO3,EDHD,EDVD.EDFLD.FRMREF 273 CHCK 25 TIMING GENERATOR 64 228 60 38 IC1501 40 IFI HD IFI VD IFI OE 8 163 279 79 149 DV SIGNAL PROCESS RF SIGNAL PROCESS 120 271 (8/14) LCK0 IC2301 162 224 CN1501 17 16 22 143 119 RYO0-RYO3,DEHD,DEVD.DEFLD.SGOUT 270 CH SO,SCK CN1501 VCK 269 | 7 14 15 22 LCK0 268 219 IFI Y0-Y7 175 | 169 12 34 CN5302 (7/14) IC2101 241 XSHD,XSHP,CLPDM CN5101 8-5 47 AGC A/D CONV. CN1501 VCK 96 CAMERA PROCESS IC1503 30 • 31 20 • 21 13 14 1 1-4 • 10-12 CN5101 CCD OUT +,- (4/14) SPCK 97 IC1601 (1/14) 3-2 SP+ SPHP L HP R MIC L MIC R 4 TO OVERALL BLOCK DIAGRAM (2/4) (VA-118) (PAGE 3-3) J5301 AUDIO/VIDEO DCR-TRV33/TRV33E 3. BLOCK DIAGRAMS COVER 3-2. OVERALL BLOCK DIAGRAM (2/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VA-118 BOARD(2/4) CN1004 CPC FOR ADJUSTMENTS CN1002 PANEL VG 79 PSIG 81 XHD OUT 76 EVF VG 69 EVF VCO 66 9 5 7 13 11 PD-188 BOARD(1/2) CN4004 PANEL VG PSIG XHD OUT 79 81 76 69 66 CN4003 CN6201 12 13 20 11 10 9 PANEL R,G B VC-313 BOARD (2/4) 12 13 20 48 47 46 11 10 9 (1/2) IC6001 RGB DRIVE 20 VR,VG,VB 22 24 PSIG COM 27 40 39 4 5 3 DAC 35 COM DC (1/2) 46 45 42 5 TO OVER ALL BLOCK DIAGRAM (3/4) (VC-313) HD VD VD,SO,SCK 70 68 19 18 19 18 17 15 17 15 IC6002 14 TIMING GENERATOR 24 1 48 TO OVER ALL BLOCK DIAGRAM (4/4) 5 BL HIGH 10 INVERTER BL REG BACK LIGHT DRIVE 23 2 7 8 12 13 19 (1/2) BL LOW 3 3 CN6101 IC6102 4 CURRENT DET | 22 CN6001 2 8 5 DETIN HD OUT (1/2) 6 2.5 INCH COLOR LCD UNIT T6101 Q6102 ND901 BACKLIGHT 6 Q6101 4 (PAGE 3-5) BL CONT LCD901(1/2) 5 IC6101 5 2 7 1 6 EP 2.8V (PAGE 3-7) PANEL R PANEL G PANEL B PANEL HD PANEL VD EVF R EVF G EVF B 3 TO OVER ALL BLOCK DIAGRAM (1/4) (VC-313) AUDIO SIGNAL VIDEO SIGNAL 84 82 80 74 77 63 65 61 EVF R,G,B 48 47 46 40 39 20 22 24 14 IC4201 RGB DRIVE LCD902 LB-085 BOARD CN4201 (1/5) 12 13 11 14 10 9 8 10 7 11 3 18 (PAGE 3-2) 14 15 13 16 12 R,G,B COM BCK, HCK1/2, HST, EN, STB, VCK, VST 9 CN5602 VD SO,SCK EVF HD EVF VD S.Y I/O S.C I/O 71 73 99 100 HD VD VCO 46 45 42 (1/5) 24 IC4202 14 1 48 TIMING GENERATOR 1 8 TO OVER ALL BLOCK DIAGRAM (1/4) (VC-313) (PAGE 3-2) C J5404 Y IC5601 Q5602 8 16 3 CN5601 7 8 42 43 HP L HP R MIC L MIC R S Y I/O S C I/O S VIDEO G SP+ SP- CN4005 33 35 MIC R 33 35 4 2 SHOEMIC L 31 6 22 24 15 13 CN4002 9 10 BACK LIGHT DRIVE D5602 BACK LIGHT 1 2 SP+, SPCN5208 96 95 91 88 4 2 6 3 G 4 COLOR EVF UNIT SP901 SPEAKER CN5205 CK-129 BOARD (1/2) G CN5401 MIC901 MIC L 1 35 MIC R 3 1 22 14 36 48 R 3 L 33 MIC (PLUG IN POWER) (headphones) MIC AMP MIC L CN4001 J5401 J5405 IC5501 (1/2) L HP L HP R R CN5402 MA-421 BOARD (2/3) 3-3 8 SHOE MIC L FP-620 (FLEXIBLE) 3 INTELLIGENT ACCESSORY SHOE (1/2) 3-4 DCR-TRV33/TRV33E 3. BLOCK DIAGRAMS COVER 3-3. OVERALL BLOCK DIAGRAM (3/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CN1004 CPC FOR ADJUSTMENTS 4 RF MON SWP VC-313 BOARD(3/4) Z MECHA DECK 2 (9/15) REC CK REC CK REC DT REC DT 44 46 10 REC/PB AMP RF IN RF IN CN1801 IC1801 9 6 EVEN 3 RF MON RF SWP SWP 2 TO OVERALL BLOCK DIAGRAM (1/4) SWP 5 DRUM 4 35 ODD 3 2 30 39 38 (PAGE 3-2) 172 MC BUS 164 35 38 VSP SO, SCK SPCK 36 (12/14) (11/15) IC2501 M903 (1/2) CN2503 SWP, FRRV, TRRT, TRRV IC2601 52 | 45 (12/14) MECHA CONTROL (2/2) 190 165 CAP FG 4 FRRV TRRT TRRV 5-2-6 CAPSTAN MOTOR DRIVE (11/14) 23 89 CAP PWM 41 178 Q4508 IC2501 43 15 CAP ERROR 15 LPF 69 67 88 DRUM PWM 44 13 13 DRUM ERROR 6 14,16 14,16 CAP VS 5 TO OVERALL BLOCK DIAGRAM (1/4) (VA-118) 75 4 | 1 CAP U,V,W CN1002 70 197 DRUM FG M CAPSTAN MOTOR 11 | 14 CN2501 PWM DRIVE Q4509 DRUM VS SWITCHING 10,12 10,12 63 CN4004 CN4004 63 64 67 DRUM MOTOR DRIVE CN1002 53 DRUM FG AMP M901 6 DRUM U,V,W 65 | 68 1 VA-118 BOARD (3/4) 80 VD SO, SCK FG 78 77 61 82 VD SO, SCK CAPSTAN 25 76 (1/2) 45 LPF SWITCHING 74 IC4502 (2/2) 70 VSP SO,SI,SCK (4/5) 9 179 VSP SO,SI,SCK 22 20 | 17 1 32 EEPROM FG 1,2 7 8 80 166 33 IC2602 CAPSTAN FG AMP CAP ON,CAP FWD DRUM MOTOR M 10 DRUM FG 9 DRUM PG 52 68 (PAGE 3-3) CN1002 198 DRUM PG 50 DRUM PG AMP 49 32 LOADING MOTOR DRIVE 69 CN2502 M902 1 15 LOAD,UNLOAD 13 192 193 31 33 TREEL FG SREEL FG TAPE END 21 72 3 30 REEL FG AMP TAPE END DETECT DEW AD 22 23 20 T REEL +, – 65 HI SO,SI,SCK 7 (PAGE 3-8) 19 TAPE TOP DETECT 18 S REEL +, – 119 LOADING MOTOR DEW SENSOR 26 T REEL 25 SENSOR 22 S REEL SENSOR DEW AD H902 H901 Q901 TAPE END SENSOR 20 63 180 REC PROOF 5 23 66 TO OVERALL BLOCK DIAGRAM (4/4) TAPE TOP M 4 1 X2601 20MHz | 26 27 29 25 LM +, – TAPE LED ON Q902 TAPE TOP SENSOR CHIME SDA,CHIME SCK,CHIME VDD 11 XCC DOWN 106 D901 TAPE LED MODE SW A - MODE SW C | 108 18 REC PROOF 12 S901 13 | 4PIN CONNECTOR MIC902 15 XCC DOWN 17 S903 C. C. DOWN 7 MODE | SWITCH 9 S902 16 DIGITAL VIDEO/AUDIO SIGNAL 3-5 3-6 DCR-TRV33/TRV33E 3. BLOCK DIAGRAMS COVER ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-4. OVERALL BLOCK DIAGRAM (4/4) CK-129 BOARD (2/2) CONTROL SWITCH BLOCK (CF-CX4000) VC-313 BOARD(4/4) VA-118 BOARD(4/4) XCC DOWN BACK LIGHT 4 CN5207 2 15 60 KEY AD1 5 12 3 BATT INFO SW 3 14 65 KEY AD3 S102 3 DSPL/BATT INFO S5207 PANEL XCLOSE/OPEN SW FP-626 S101 (FLEXIBLE) PANEL REVERSE SW 3 . 4 CN5209 7 61 10 (2/5) (5/14) IC4101 KEY AD2 HI CONTROL CN4004 XCC DOWN SI LCD901 (2/2) 2. 1. 5. 4 TOUCH PANEL CN6203 3. 4. 1. 2 3. 4. 1. 2 TP L TP R TP TOP TP BOT CN5210 Q4003-4005 5. 2. 4. 3 12 . 15 . 13 . 14 34 . 48 . 70 . 71 TOUCH PANEL I/F TOP TOP TOP TOP SEL SEL SEL SEL 1 2 X Y CN6202 SCK X 0A 52 X 1A 51 X TAL 29 X TAL 28 SO 50 . 50 . 49 . . 49 48 48 SI,SO,SCK PD-188 BOARD (2/2) 6 73 11 RESET XRESET . 1 16 BT5201 LITHIUM BATTERY LI 3V SI SO SCK 190 TXD . 191 RXD . 185 SCK CHIME SDA CHIME SCK CHIME VDD (2/2) HI SO 200 .. HI SI 201 . . XHI SCK 199 HI CONTROL 189 CAM DD ON HI SO,SI,SCK EEP TXD 207 . EEP RXD 206 . EEP SCK 205 X4102 10MHz 5 . 2 . 6 (5/14) IC2701 . EEPROM CN4005 CN5208 TO 7 OVERALL BLOCK DIAGRAM(3/4) (PAGE 3-5) X4101 32.768KHz 18 18 S5203 CHIME SDA 160 . CHIME SCK 162 . CHIME AD0 228 . CHIME AD1 229 . CHIME AD2 230 IC2704 59 59 5 23 . 24 . 25 CN1002 REC PROOF 3 REC PROOF S101 ZOOM VR AD TO EXT STROBO 62 62 MA-421 BOARD (3/3) J5402 D5405 (NS LED) (2/2) CN4002 IC5401 26 10 27 Q4001,4002 15 IR ON LED DRIVE 45 SIRCS PWM 41 SIRCS SIG SIRCS SIG 4 REMOTE COMMANDER RECEIVER 11 (PAGE 3-1) CONTROL SWITCH BLOCK(FK-CX4000) Q4101 LANC SIG (LANC) 6 BATT SIG 31 CN5402 I/F 42 . 43 IB SO 35 VTR DD ON IB SI 75 SHOE ON 74 BATT/XEXT 37 FAST CHARGE CN1003 XCAM MODE SW XPHOTO STBY SW 2 . 1 . 7 55 . 55 . 54 . . 54 58 58 9. 12 . 10 XS/S SW 69 56 56 8 4 53 53 7 XVTR MODE SW XEJECT SW XCAM STBY SW XVTR MODE SW XPHOTO STBY SW S002 XS/S SW LANC SIG LANC I/O 51 LI 3V 50 . 48 RESET 45 39 42 43 3V REG 40 . 39 XPHOTO FREEZE 6 57 57 2 KEY AD0 59 52 52 3 14 . 53 . 62 OPEN/ Z EJECT VTR DD ON 38 SHOE ON IC4502 DC/DC CONVERTER RESET LANC I/O BATT/XEXT FAST CHARGE BATT SIG 20 HI EVER SO . 21 HI EVER SCK HI EVER SO,SCK SHOE ID2 SHOE ID1 BL CONT (2/2) ZOOM AD VCC 6 27 . 28 (4/5) PHOTO REC 5 EVER 3.0V 41 5 . 4 58 . 57 BL REG 3 MT 5V 2 . 1 SHOE UNREG D 1.5V EXT STROBO SHOE ID1,2 LANC SIG SHOE UNREG 6 5 . 4 3 2 . 1 INTELLIGENT ACCESSORY SHOE (2/2) CN4001 IR 2.8V RP 2.8V A 2.8V CN4603 D 2.8V 1 BT901 BATTERY TERMINAL S AU 2.8V EP 2.8V OVERALL 6 TO BLOCK DIAGRAM(2/4) D 1.9V (PAGE 3-3) BL CONT 2 3 A 4.6V AU 4.6V EP 4.6V Q4601, Q4602 RP 4.6V EP 13.3V CAM 15V CAM -7.5V CAM DD ON CN4602 BATT UNREG 1 DC IN VTR UNREG 2 3 Q4608, Q4610 SHOE UNREG 16 3-7 S072 XEJECT SW XRESET VOUT MEMORY CAMERA OFF (CHG) VCR START/STOP SW LANC OUT LANC IN S001 POWER SW PHOTO FREEZE LANC OUT LANC IN 1 OVERALL BLOCK DIAGRAM(1/4) 3-8 S071 PHOTO SW RV001 ZOOM VR SW DCR-TRV33/TRV33E 3. BLOCK DIAGRAMS COVER ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-5. POWER BLOCK DIAGRAM (1/2) VA-118 BOARD (3/5) 23 R400,4005 IC4301 BT901 BATTERY TERMINAL CN4603 1 S 2 BATT SIG Q4601, 4602 BATT UNREG NS LED A 1 A 4.6V TO POWER BLOCK DIAGRAM (2/2) (MA-421) 28 29 YAW/PITCH SENSOR AMP F4602 BATT UNREG D 2.8V 25 10 A 2.8V LANC DC AU 2.8V CN4002 (PAGE 3-11) Q4603, 4604 3 CHARGE SWITCH L4601 F4605 BL REG UNREG F4604 C/D VS DC IN LF4601 ACV UNREG INIT CHARGE ON 1 F4603 2 BATT FET ON 3 BATT/XEXT CN4602 VTR UNREG VTR UNREG IC4501 DC/DC CONVERTER RESET,LANC I/O Q4514,4516,4518 37 RT 30 Q4504 SWITCHING CN4001 1 SHOE UNREG 1 56 MT 5V 5V REG SHOE ON VREF INTELLIGENT ACCESSORY SHOE VTR UNREG (4/5) Q4608,4610 F4606 L4502 IN1 L4508 VCC D 1.5V D4503 2 CN4004 54 OUT1 57 43 CN5207 LED 3V REG 55 CN4005 5 4 IN1 20 EVER_3.0V 13 58 41 40 D4502 CONTROL SWITCH BLOCK(CF-CX4000) CK-129 BOARD 54 BATT SENS 55 ACV SENS (2/5) 16 75 1 LI_3V 74 Q4101 BATT SIG I/F VOUT VCC 53 IC4101 HI CONTROL BT5201 LITHIUM BATTERY 14 Q4505 SWITCHING 39 42 45 BATT IN 31 44 BL CONT L4504 RESET 38 INIT CHARGE ON 37 FAST CHARGE 42 IB SO 43 IB SI Q4506 SWITCHING HI EVER SO 20 27 DIN HI EVER SCK 21 28 CLK XCS DD 49 26 LD VTR DD ON 35 39 CTL1 L4511 PR 2.8V L4512 A 2.8V VTR DD SENS 1 VTR MODE SW 2 CAM MODE SW 7 XPHOTO STBY SW XLANC PWR ON L4514 6 11 5 Q4507 SWITCHING 8 Q4526 CN5208 REG 52 54 V CONT LANC DC LANC I/O 6 20 22 24 (4/5) IC4504 4 6 11 USB 3.1V 27 29 14 16 3.1V REG L4516 L4505 15 A 4.6V L4517 10 12 AU 4.6V 13 EP 4.6V 18 OUT4 60 49 D 1.5V L4519 RP 4.6V 32 IN4 23 31 Q4508 SWITCHING L4506 EP 13.3V 13.3V REG CAP VS IN1 2 USB 3.1V TO POWER BLOCK DIAGRAM (2/2) (VC-313) 5 7 D 1.9V 1 XRESET RESET A 2.8V 2 4 8 1.9V REG RP 4.6V RP 2.8V EP 2.8V IN3 22 AU 2.8V 21 23 Q4524,4525 OUT3 59 AU 4.6V 25 AU 2.8V L4515 L4518 S5203 28 D 2.8V VR 34 56 30 IR 2.8V L4513 SHOE ON BATT/XEXT 1 3 26 OUT2 58 XPHOTO STBY SW VTR UNREG BL REG L4521 +INE2 14 73 L4509 BL CONT BATTERY IN DETECT 62 XRESET L4503 XVTR MODE SW XCAM MODE SW 33 D 1.9V D 2.8V MT 5V (PAGE 3-11) A 4.6V CAP VS CAP ERROR DRUM VS DRUM ERROR CAM DD ON CAM 12V CAM -6.5V EP 13.3V Q4513 OUT5 61 +INE5 CAP ERROR 9 Q4509 SWITCHING L4507 DRUM VS OUT6 62 D 2.8V +INE6 D4502 RECT LB-085 BOARD LCD902 COLOR EVF UNIT CN5602 L4510 L4501 CN5601 CN4201 20 1 DRUM ERROR 6 FB4202 EP 13.3V 1 OUT7 63 EP 2.8V IN7 2 19 1 20 2 Q4510 SWITCHING CAM 12V 12V REG Q4515, Q4517, Q4519 CAM -6.5V -6.5V REG EP 4.6V D4504 RECT Q4520, 4521 CAM DD ON 6 EP 4.6V EP 13.3V 3 EP 2.8V TO POWER BLOCK DIAGRAM (2/2) (PD-188) 3 (1/5) IC5601 (1/5) IC4201 IC4202 RGB DRIVE TIMING GENERATOR BACK LIGHT DRIVE 7 LANC DC 4 5 CN4003 8 5 16 LED ON/OFF 16 3-9 3-10 BL REG BL CONT (PAGE 3-12) DCR-TRV33/TRV33E 3. BLOCK DIAGRAMS COVER ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-6. POWER BLOCK DIAGRAM (2/2) MA-421 BOARD PD-188 BOARD CN5402 D 2.8V EP 4.6V 14 (2/2) D5405 NS LED A 12 A 4.6V 1 VC-313 BOARD CONTROL SWITCH BLOCK(FK-CX4000) RV001 D 2.8V D 2.8V 6 ZOOM VR XCAM MODE SW XPHOTO STBY SW 54 12 55 9 58 10 IC5401 3 8 (LANC) 7 TO POWER BLOCK DIAGRAM (1/2) (VA-118) (PAGE 3-10) IC5501 VTR UNREG | CAMERA Q3001 REG SP VCC S1 POWER AU 2.8V TIMING GENERATOR 14 ND901 BACKLIGHT (1/2) IC6101,6102 BL REG 27 INVERTER 4 BL CONT BL HIGH 10 BACK LIGHT DRIVE 5 CN6101 CN6201 (13/14) (13/14) IC3001 IC2901 AUDIO I/O AUDIO D/A CONV. A/D CONV. AU 4.6V 30 RGB DRIVE OFF (CHG) 3 AU 4.6V (2/2) IC6002 PITCH, YAW SENSOR MIC AMP MEMORY 1 (2/2) IC6001 SE5401, 5402 CN1003 VTR UNREG 18 (2/2) (PAGE 3-10) CN6001 3 EP 2.8V J5402 LANC DC LCD UNIT Q6003, 6004 FB6002 EP 13.3V REMOTE COMMANDER RECEIVER VCR CN1002 XVTR MODE SW TO POWER BLOCK DIAGRAM (1/2) (VA-118) NIGHT SHOT LED 9 LCD901 6 LED (4/14) (12/14) IC2104 IC2602 BUFFER EEPROM (12/14) (14/14) IC2601 IC1002 CAMERA CONTROL MECHA CONTROL MT 5V 153 XREEL HALL ON 5 CN201 7 MS VCC 4 3.1V REG MEMORY STICK 3 FP-630(FLEXIBLE) CN1006 1 MS VCC ON AU 2.8V 26 D 2.8V D 1.5V L1002 RP 4.6V CAM DD ON D 1.,5V (IC2704) MS VCC ON (9/14) (7/14) (4/14) (4/14) (2/14) IC1801 IC2301 IC2101 IC2103 IC1601 REC/PB AMP DV SIGNAL PROCESS RF SIGNAL PROCESS DV SIGNAL PROCESS MPEG MOVE PROCESS DIGITAL STILL PROCESS AUDIO SIGNAL PROCESS 64Mbit SDRAM CAMERA PROCESS 5 CHIME PWR CONT 4 (5/14) (5/14) IC2704 IC2702 IC2703 IC2705 EEPROM XTAL OSC NAND HI CONTROL DIGITAL STILL CONTROL IC2801 D1.5V(IC2704) FB2703 A 2.8V INT1 USB 3.1V D 1.9V D 2.8V MT 5V A 4.6V CAP VS CAP ERROR DRUM VS DRUM ERROR CAM DO ON CAM 12V CAM -6.5V EP 13.3V 21 23 2 4 5 7 (11/14) RP 2.8V 6 CAP VS 75 77 DRUM ERROR 45 A 2.8V A 1.5V D 1.5V IC A 1.5V L1001 SDRAM IC2501 EP 13.3V D 1.5V 16M FB2801 D2.8V USB 3.1V 25 16M FLASH MEMORY A 1.5V (PAGE 3-10) RP 2.8V IC2803 (6/14) RP 4.6V 28 TO POWER BLOCK DIAGRAM (1/2)(VA-118) 189 (5/14) CAP ERROR D 1.5V DRUM VS USB 3.1V 43 64 67 CAPSTAN MOTOR DRIVE CAPSTAN FG AMP DRUM MOTOR DRIVE DRUM FG,PG AMP LOADING MOTOR DRIVE REEL FG AMP TAPE TOP,END DET DRUM,CAP ERROR AMP Q2705 CHIME VDD SENSOR VCC 8 20 22 24 6 11 D 2.8V D 2.8V VTR UNREG VTR UNREG MT 5V MT 5V R2515 TAPE LED A 4PIN CONNECTOR 27 T REEL, S REEL SENSOR 19 TAPE LED CN2502 30 Z MECHA DECK 14 16 A 2.8V 15 D 2.8V 10 12 A 4.6V 13 13 Q2501 CHIME PWR CONT 2 CAM DO ON (6/14) (5/14) XREEL HALL ON AU 2.8V A 2.8V 6 A 4.6V D 1.9V 5 L1302 18 (1/14) IC1504 32 31 33 (8/14) (10/14) (3/14) (3/14) IC2201 IC1901 IC1301 IC1302 DV INTERFACE VIDEO IN/OUT AGC ACC FOCUS/ZOOM/ IRIS/ND DRIVE FOCUS/ZOOM/ IRIS/ND CONTROL 4 IC1501 CD-431 BOARD TIMING GENERATOR 3.4V CN5101 CAM 12V 3.4V REG 3 20 1 22 5 18 CAM -6.5V (1/14) IC1503 A 2.8V AGC A/D CONV. IC5101 IC5102 CCD IMAGER S/H CN1501 2.8V Z MR VCC CN1301 7 ZOOM MR SENSOR 21 FOCUS MR SENSOR LENS ASSY F MR VCC 3-11 3-12E DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER 4-3. PRINTED WIRING BOARDS SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM (1/3) CN1501 1 1 CAM_7.5V CCD_OUT- 2 2 CSUB CCD_OUT+ 3 3 CAM_15V GND 4 4 CLPDM V4 5 5 A_2.8V V3 6 6 GND V2 7 7 XSHP 8 9 9 GND GND 10 10 RG H2 11 11 H1 12 H2 13 GND 14 VSUB 11 12 CN5302 I DV 4 TPA 3 NTPA 2 TPB 1 NTPB CN5301 5 USB J 4 4P 4 5 6 7 8 9 10 YODD XODD GND XSDL YSDL GND 1 3 2 DRUM_V 2 3 DRUM_V GND 4 DRUM_W 1 5 DRUM_W GND 6 YEVEN 7 DRUM_U XEVEN 8 M_COM DRUM_U CN1801 10P 9 27 12 Z_MR_VCC REG_GND 11 8 Z_MR_A_P XPHOTO_STB_SW 10 9 Z_MR_GND XCAM_STBY_SW 9 10 Z_MR_B_P XS/S_SW 8 11 ND_BIAS+_P XEJECT_SW 7 12 ND_HALL-_P D_2.8V 6 13 ND_DRIVE-_P ZOOM_AD 5 14 ND_DRIVE+_P REG_GND 4 15 ND_BIAS-_P KEY_AD0 3 16 ND_HALL+_P XPHOTO_FREEZE 2 N.C. 1 10 REG_GND REG_GND 8 9 MS_VCC MS_VCC 7 8 MS_SCLK MS_SCLK 6 7 N.C. 6 MS_XIN 5 N.C. 17 NT_SHOT_P 18 NS_GND 19 F_MR_B_P 20 F_MR_A_P 21 F_MR_VCC CN1003 VC-313 BOARD(1/2) TEMP_P 23 TEMP_GND 24 ZOOM+_P 25 ZOOM-_P 26 FOCUS+_P 27 FOCUS-_P REG_GND 15 15 REG_GND AUDIO_R_I/O 14 14 AUDIO_R_I/O AV_JACK_IN 13 13 AV_JACK_IN VIDEO_I/O 12 12 VIDEO_I/O REG_GND 11 11 REG_GND NTPB 10 10 NTPB 9 TPB 8 REG_GND 7 TPA 7 10 26 HALL_VCC XVTR_MODE_SW 7 AUDIO_L_I/O TPA FG 25 TREEL+ I_HALL+_P 16 8 PG 24 TREEL- I_BIAS-_P 6 16 9 FG/PG_COM 23 HALL_GND I_DRIVE+_P 5 AUDIO_L_I/O TPB 10P 22 I_DRIVE-_P CN1001 REG_GND CN2501 21 SREEL- 14 CHIME_SDA 20 13 CHIME_VDD SREEL+ 12 XREC_PROOF I_HALL-_P 4 16P FLEXIBLE AUDIO/VIDEO TO VIDEO HEAD 3 CN1004 FP-625 J5301 19 2 22 H 18 I_BIAS+_P 16 G 17 1 15 CN5303 TOP/END_GND 9 11 TAPE_TOP 8 10 27 FG_GND XMODE_SW_C 26 FG_GND SW_COM/SW_GND 25 FG2 7 24 FG_VCC 6 23 FG_VCC XMODE_SW_B 22 FG1 5 21 N.C. DEW- 20 CAP_U XMODE_SW_A 19 CAP_U 4 18 CAP_U 3 17 CAP_U DEW+ 16 HE_VCC 2 15 WHE- LM_UNLOAD 14 CAP_W LM_UNLOAD 13 CAP_W 1 12 CAP_W LM_LOAD 11 CAP_W LM_LOAD 9 8 10 27P 27P CN2502 CN1301 WHE+ GND 7 22 VHE- 22 VHE+ CCD_OUT- CAM_7.5V 6 CCD_OUT+ 21 5 20 21 UHE- 20 CSUB 4 GND CAM_15V UHE+ 19 HE_GND 19 3 V4 CLPDM 2 V3 18 CAP_V 17 18 1 17 19 V2 GND A_2.8V 18 V1 16 TAPE_END 15 16 F 16 TO DRUM MOTOR 17 15 XSHP TO SENSOR,LOADING MOTOR TAPE_LED_K XSHD TO CAPSTAN MOTOR TAPE_LED_A 14 16 GND 15 13 LENS BLOCK 15 MECHANISM DECK(Z100) XCCDOWN_SW 12 E 14 CHIME_SCK H1 RG D 13 XSHD CAP_V C 8 CAP_V CD-431 BOARD V1 VSUB 10 9 22P CAP_V CCD IMAGER B GND 8 MIC/REC_SW_GND 22P 7 27P CN5101 6 5 FLEXIBLE A 4 CN2503 3 FP-624 2 1 NTPA 6 6 NTPA REG_GND 5 5 REG_GND USB_DET 4 4 USB_DET 16P CONTROL SWITCH BLOCK (FK_CX4000) N.C. LANC_SIG 14 EXT_DA 13 EVF_VG 12 GND 11 EVF_VCO 10 GND CN201 CPC (FOR CHECK) 12P 9 PANEL_VG 8 GND 7 H_START 6 GND 5 PANEL_COM 4 CN1006 8P FP-630 10P MS_INSERT 5 SWP MS_DIO 4 3 RF_IN/LANC_JACK_IN MS_VCC 3 4 MS_DIO 2 RF_MON MS_BS 2 3 MS_VCC 1 FRRV GND 1 2 MS_BS 1 REG_GND 16P FLEXIBLE MEMORY STICK CONNECTOR 5P USB_D- 3 3 USB_D- USB_D+ 2 2 USB_D+ REG_GND 1 1 REG_GND USB GND ID 3 D+ 2 D- 1 VCC JK-242 BOARD K 16 4-1 4-2 FRAME SCHEMATIC DIAGRAM (1/3) I FRAME SCHEMATIC DIAGRAM (2/3) S VIDEO J5404 J5402 (LANC) 4-3 SE5402 PITCH SENSOR MA-421 BOARD CN5401 4P INT_MIC_L GND INT_MIC_R GND 1 2 3 4 MIC901 MIC UNIT VB BLK HCK1 HCK2 HST RGT DWN EN STB VCK VST VSS VDD 12 11 10 9 8 7 6 5 4 3 2 1 (headphones) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 D_2.8V LED_DA XEVF_TALLY_LED LED_ON/OFF EVF_GND COM VG VR VB BLK HCK1 HCK2 HST EN STB VCK VST EVF_GND EVF_VCC 20P EP_4.6V CN5601 XF_TALLY_LED D_2.8V MS_LED_ON VREF1 VREF2 LIA1 LIA2 REG_GND REG_GND HP_L_OUT REG_GND HP_R_OUT REG_GND HP_JACK_IN AU_2.8V ZOOM_MIC_CONT MIC_MONO MIC_IN SHOE_MIC_L REG_GND MIC_L REG_GND MIC_R REG_GND 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 VD_SCK XEVF_TALLY_LED LED_ON/OFF 17 16 15 FP-620 FLEXIBLE FP-621 L-CH R-CH LCD902 COLOR EVF UNIT J 16 4-4 J5401 LB-085 BOARD MIC(PLUG IN POWER) J5405 3P BT901 (BATTERY TERMINAL) ACV_GND ACV_UNREG 1 BATT/XEXT 2 3 BATT_UNREG 1 3P BATT_SIG 2 88 88 89 89 MIC_R REG_GND HP_L_OUT FP-619 FLEXIBLE DC IN S_Y_I/O S_C_I/O 100 100 S_C_I/O XS_JACK_IN 99 99 98 98 S_Y_I/O XS_JACK_IN HP_JACK_IN HP_R_OUT 96 96 HP_L_OUT 97 97 MIC_IN 95 95 HP_R_OUT HP_JACK_IN MIC_MONO 94 94 MIC_IN REG_GND MIC_L ZOOM_MIC_CONT 93 93 92 92 91 91 REG_GND MIC_R PITCH_AD VST_C_RESET MIC_MONO REG_GND MIC_L ZOOM_MIC_CONT 90 90 87 87 PITCH_AD 12 CN4602 BATT_GND 3 CN4603 86 86 VST_C_RESET 11 YAW_AD PANEL_R EVF_VCC 1 85 85 EVF_GND 2 REG_GND YAW_AD PANEL_G VST 3 REG_GND PSIG 82 82 PANEL_G VCK 4 84 84 PANEL_B 81 81 PSIG STB 5 PANEL_R PANEL_VG 80 80 PANEL_B EN 6 83 83 REG_GND 79 79 PANEL_VG HST PANEL_XVD 7 8 78 78 77 77 PANEL_XVD REG_GND XHD_OUT 76 76 XCS_LCD PANEL_XHD XHD_OUT 75 75 XCS_LCD HCK2 HCK1 BLK VB EVF_XVD XCS_EVF 10 9 10 11 74 74 73 73 EVF_XVD VG 13 PANEL_XHD 72 72 XCS_EVF COM 14 VR 71 71 EVF_XHD EVF_GND 12 VD_SO 70 70 VD_SO EVF_XHD G 69 69 G XRST_VTR 68 68 VD_SCK LED_DA 18 VCO 67 67 XRST_VTR D_2.8V 19 EVF_G 66 66 VCO EP_4.6V 65 65 EVF_G 20 20P XSYS_RST CN4201 EVF_R 64 64 XSYS_RST EVF_B OSD_V XCC_DOWN XPHOTO_STBY_SW XPHOTO_FREEZE XS/S_SW XCAM_MODE_SW XVTR_MODE_SW XEJECT_SW KEY_AD0 XCS_IC2704 IC2704_SI EXT_STROBO 57 57 56 56 55 55 54 54 53 53 52 52 51 51 50 50 63 63 XS/S_SW XCAM_MODE_SW XVTR_MODE_SW XEJECT_SW KEY_AD0 XCS_IC4101 IC4101_SI IC2704_SO IC2704_SCK LINE_OUT_V EVF_R 48 48 IC4101_SCK MS_LED_ON 62 62 47 47 LINE_OUT_V XDS_RESET EXT_STROBO 46 46 MS_LED_ON IC2704_MAD 61 61 45 45 XDS_RESET SP- EVF_B 44 44 IC4101_MAD SP+ 60 60 43 43 SP- REG_GND OSD_V 42 42 SP+ REG_GND 59 59 41 41 REG_GND REG_GND XCC_DOWN 40 40 REG_GND REG_GND 58 58 39 39 REG_GND REG_GND XPHOTO_STBY_SW 38 38 REG_GND REG_GND SHOE_UNREG_GND 37 37 REG_GND REG_GND 10 36 36 REG_GND REG_GND XPHOTO_FREEZE 35 35 REG_GND EP_13.3V SHOE_UNREG_GND 34 34 REG_GND CAM_15V 9 33 33 EP_13.3V CAM_-7.5V SHOE_MIC_L 32 32 CAM_15V AU_4.6V 8 31 31 CAM_-7.5V A_4.75V SHOE_MIC_GND 30 30 AU_4.6V RP_4.75V 7 29 29 A_4.75V A_4.75V EXT_STROBO 28 28 RP_4.75V AU_2.8V 6 27 27 A_4.75V RP_2.8V HOTSHOE_ID2 26 26 AU_2.8V D_2.8V 5 25 25 RP_2.8V A_2.8V HOTSHOE_ID1 24 24 D_2.8V D_2.8V 4 23 23 A_2.8V A_2.8V LANC_SIG 22 22 D_2.8V D_2.8V MT_GND CAM_DD_ON 3 21 21 A_2.8V 49 49 20 20 D_2.8V IC4101_SO 19 19 MT_GND MT_GND SHOE_UNREG E 2 VA-118 BOARD(1/2) SHOE_UNREG D 1 CN4001 10P NS_LED_A 25 18 18 CAM_DD_ON CAP_VS 9 13 29 MIC_MONO FLEXIBLE VR 28 ZOOM_MIC_CONT G INTELLIGENT ACCESSORY SHOE 14 27 AU_2.8V NS_LED_K 26 17 17 MT_GND CAP_ERROR B VG 26 HP_JACK_IN SIRCS_SIG 27 16 16 CAP_VS CAP_VS 8 15 25 REG_GND A_4.6V 28 15 15 CAP_ERROR DRUM_ERROR 7 COM 24 HP_R_OUT LANC_DC 29 14 14 CAP_VS DRUM_VS 6 16P 23 REG_GND XLANC_JACK_IN 30 13 13 DRUM_ERROR 4-2. SCHEMATIC DIAGRAMS 16 CN5602 22 HP_L_OUT 37 21 REG_GND N.C. 20 REG_GND 36 19 LIA2 MIC_GND(REG_GND) 18 LIA1 35 17 VREF2 MIC_R 16 VREF1 34 15 MS_LED_ON MIC_GND(REG_GND) 14 D_2.8V 33 13 XF_TALLY_LED MIC_L 12 NS_LED_A 32 11 NS_LED_K LANC_SIG 31 MT_5V DRUM_VS MT_5V D_1.9V 5 MIC_GND(REG_GND) 10 SIRCS_SIG REG_GND 32 12 12 DRUM_VS 9 D_1.5V_IC USB_3.1V D_1.5V_IC A_1.5V VTR_UNREG 4 31 9 A_4.6V S_Y_I/O 33 9 MT_5V 8 11 11 8 D_1.9V 7 MT_5V 7 D_1.5V_IC 6 10 10 6 USB_3.1V 5 DRUM_VS 5 D_1.5V_IC 4 A_1.5V 100P 3 30 8 LANC_DC REG_GND 34 4 D_1.5V 3 2 CN1002 VTR_UNREG 2 MIC_IN 7 XLANC_JACK_IN S_C_I/O 35 3 1 COVER SHOE_MIC_L 6 4 S_Y_I/O 5 3 REG_GND REG_GND 2 S_C_I/O XS_JACK_IN 36 36P 2 D_1.5V VTR_UNREG B TO B LANC_SIG 1 CN4002 F XS_JACK_IN 37P 1 C VTR_UNREG 100P 1 SE5401 YAW SENSOR H CN5402 CN4004 DCR-TRV33/TRV33E 4-3. PRINTED WIRING BOARDS FRAME SCHEMATIC DIAGRAM (2/3) 13 14 A VC-313 BOARD(2/2) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER 4-3. PRINTED WIRING BOARDS FRAME SCHEMATIC DIAGRAM (3/3) 2 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A CK-129 BOARD CN5207 B 6P REG_GND 1 N.C. 2 KEY_AD1 3 BATT_INFO_SW 4 EVER_3.0V 5 XCHARGE_LED 6 CONTROL SWITCH BLOCK (CF-CX4000) BT5201 (LITHIUM BATTERY) BL_GND 2 SE_GND 3 3 EP_13.3V 16P TP_R 14 TP_BOT TP_TOP 4 13 TP_TOP TP_L 5 12 TP_L 11 REG_GND TP_R 4 10 SP+ TP_L 3 9 SP- TP_BOT 2 8 REG_GND TP_TOP 1 BL_CONT EP_4.6V 6 6 EP_4.6V REG_GND 6 EP_2.8V 7 7 EP_2.8V SP+ 7 REG_GND 8 8 REG_GND SP- 8 PANEL_B 9 9 PANEL_B REG_GND 9 PANEL_G 10 10 PANEL_G KEY_AD2 10 7 KEY_AD2 PANEL_R PANEL_VG PSIG 13 13 PSIG XRST_VTR 14 14 XRST_VTR 15 VD_SCK 16 XCS_LCD 17 VD_SO 18 PANEL_VD 19 PANEL_HD 20 XHD_OUT VD_SCK 15 XCS_LCD 16 VD_SO 17 PANEL_VD 18 PANEL_HD 19 XHD_OUT 20 TP_TOP 1 TP_BOT 2 TP_L 3 TP_R 4 4P FP-618 FLEXIBLE FP-626 FLEXIBLE S101 (PANEL REVERSE SW) LI_3V BL_REG 12 1 15 3 5 11 REG_GND 16 2 4 12 2 1 5 11 REG_GND TP_R 4 PANEL_R 3 LI_3V BL_REG PANEL_VG 4 PANEL_REV TP_BOT BL_CONT F CN6202 CN5208 16P 5 PANEL_REV XRESET 11 6 XRESET BATT_INFO_SW 12 5 BATT_INFO_SW EVER_3.0V 13 4 EVER_3.0V KEY_AD3 14 3 KEY_AD3 KEY_AD1 15 2 KEY_AD1 XCHARGE_LED 16 1 XCHARGE_LED CN5210 4P SP(-) 1 2 CN4005 6 REG_GND 2 PD-188 BOARD 1 SE_GND 20P REG_GND 2P E BL_GND EP_13.3V PV-140 HARNESS CN6101 D CN4003 SP(+) 20P CN5205 CN6201 1 1 2 LED LED_GND 3 4 BL_LOW 5 N.C 6 N.C 7 N.C N.C N.C 6P VA-118 BOARD(2/2) 10P BL_HIGH N.C 9 10 C 8 CN5209 SP901 SPEAKER R B RGT TEST2 4 3 2 1 TP_R G 5 TP_L PSIG 6 1 HCK1 7 N.C. HCK2 8 2 CRext 9 TP_BOT SOUT 10 3 REF 11 TP_TOP HST 12 4 WIDE 13 5 CS 14 6P VVSSG 15 CN6203 VDOG 16 N.C. VSS 6 VDD EN 20 17 VCK 21 DWN VST 22 18 COM 23 19 TEST1 24 CN6001 24P G H LCD901 2.5INCH COLOR LCD UNIT TOUCH PANEL I ND901 BACK-LIGHT J 16 4-5 4-6 FRAME SCHEMATIC DIAGRAM (3/3) DCR-TRV33/TRV33E COVER 4-2. SCHEMATIC DIAGRAMS Link CD-431 BOARD (CCD IMAGER) PD-188 BOARD (1/2) (DRIVER, TG) LB-085 BOARD (EVF, BACK LIGHT) PD-188 BOARD (2/2) (BACKLIGHT DRIVE) VA-118 BOARD (1/5) (RGB DRIVE, TG) JK-242 BOARD (A.V/DV IN/OUT) VA-118 BOARD (2/5) (HI CONTROL) CONTROL SWITCH BLOCK (FK-CX4000) VA-118 BOARD (3/5) (Y/P SENSOR AMP, CONNECTOR) MA-421 BOARD (1/2) (MIC AMP) VA-118 BOARD (4/5) (DC/DC COVERTER) MA-421 BOARD (2/2) (Y/P SENSOR, V/A IN/OUT) VA-118 BOARD (5/5) (POWER IN, CHARGE) FP-467/468/228 FLEXIBLE (MD BLOCK) CK-129 BOARD (FUNCTION SWITCH) COMMON NOTE FOR SCHEMATIC DIAGRAMS WAVEFORMS DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) • All capacitors are in µF unless otherwise noted. pF : µ Link µF. 50 V or less are not indicated except for electrolytics and tantalums. • Chip resistors are 1/10 W unless otherwise noted. kΩ=1000 Ω, MΩ=1000 kΩ. • Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat. • Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520 1. Connection Pattern box 1.5 m Kinds of capacitor Front of the lens Temperature characteristics External dimensions (mm) • Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. • Parts with * differ according to the model/destination. Refer to the mount table for each function. • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. • Signal name XEDIT → EDIT PB/XREC → PB/REC • 2: non flammable resistor • 5: fusible resistor • C: panel designation • A: B+ Line • B: B– Line • J : IN/OUT direction of (+,–) B LINE. • C: adjustment for repair. • A: VIDEO SIGNAL (ANALOG) • A: AUDIO SIGNAL (ANALOG) • A: VIDEO/AUDIO SIGNAL • A: VIDEO/AUDIO/SERVO SIGNAL • A: SERVO SIGNAL • Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) • Voltages and waveforms are measured between the measurement points and ground when camera shoots color bar chart of pattern box. They are reference values and reference waveforms. (VOM of DC 10 MΩ input impedance is used) • Voltage values change depending upon input impedance of VOM used.) A B Red Blue White Magenta H Cyan Green Yellow 2. Adjust the distance so that the output waveform of Fig. a and the Fig. b can be obtain. A=B B A Fig. a (Video output terminal output waveform) Fig.b (Picture on monitor TV) When indicating parts by reference number, please include the board name. Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 4-7 Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER 2 LB-085 BOARD For Schematic Diagram • Refer to page 4-67 for printed wiring board of CD-431 board. • Refer to page 4-69 for printed wiring board of LB-085 board. 4-2. SCHEMATIC DIAGRAMS 3 4 5 6 7 8 9 CD-431 BOARD R11.9/P0 CCD_OUT 6 VDD CN5101 C5113 0.1u B 7 FB5101 0uH D Q5101 UNR32A300LS0 SWITCH E C5114 10u 6.3V TA A C5103 0.1u B CCD_OUT+ 4 GND 5 6 7 OUT2 OUT1 CCD_IN GND SHD VDD 6 SHP E1.0/L0 3 1 E0.3/L0 R5607 39 ± 0.5% Q5602 HN1B04FE-Y/GR(TPLR3) LED DRIVE 2 V4 LED_DA 3 IC5601 V3 XEVF_TALLY_LED 4 LED BACKLIGHT DRIVE V2 LED_ON/OFF 5 16 COM EVF_GND 6 15 VG COM 7 14 VR VG 8 13 VB VR 9 12 BLK VB 10 11 HCK1 BLK 11 10 HCK2 HCK1 12 9 HCK2 13 8 RGT HST 14 7 DWN EN 8 V1 9 VSUB TO VC-313 BOARD (1/14) C 10 GND 11 H2 TO VA-118 BOARD(1/5) CN4201 THE EP-624 FLEXIBLE (THROUGH ) (PAGE 4-37 of LVEL 3) CN5602 12 H1 13 RG 14 GND 15 XSHD 16 XSHP 17 GND EN 15 6 18 A_2.8V STB 16 5 STB 19 CLPDM VCK 17 4 VCK 20 CAM_15V VST 18 3 VST 21 CSUB EVF_GND 19 2 VSS 22 CAM_-7.5V EVF_VCC 20 1 VDD THROUGH THE FP-619 FLEXIBLE (PAGE 4-12) D C5602 2.2u F 16P LCD902 COLOR EVF UNIT HST E 155mA SIGNAL PATH C5116 0.1u B VIDEO SIGNAL CHROMA Y Y/CHROMA REC F LN5101 R0.6 P0.9 R2.8 P0 E0.4 L4.0 C5601 0.1u 20P E1.6 L4.7 2 5 1 PB GND 16 2.8 CLPDM 4.7 E1.0 L0 4 6 BACKLIGHT D_2.8V 0.6 GND VCC R5606 33k EP_4.6V 7 BYP 4 GND 6 8 3 CN5601 3 R2.2 P0 R2.3 P0 BYP 5 C5102 0.1u 16V B CCD_OUT- 1.6 2 3 BYP BYP 1 1.3 S/H IC5102 AD80017AJRURL 9 IC5102 C5108 0.1u B 14 13 12 11 10 R1.0 P0 R0.4 P0 2 E0.3/L0 R5604 33k ± 0.5% 0 L5102 10uH C5105 0.1u B GND R5605 1800 IC5601 NJM2125F(TE2) E0.3 L0 B 22P 1 CN1501 R-7.5/P0 R9.5 P0 R14.8 P0 5 RCSUB V1 V2 4 R-6.9/P0 3 R-0.5/P0 2 R-0.3/P0 1 R-7.0/P0 2 V3 V4 C VL 1 C5111 10u 10V TA A R5602 XX C5112 0.1u B C5107 XX ICX427AK-13 8 IC5101 R2.0/P0 R13.4/P0 9 4 5 C5110 4.7u 25V TA B R5603 180k ± 0.5% 5 NO MARK:EVF/LCD MODE E :EVF MODE L :LCD MODE 3 GND RG H1 H2 GND VSUB 14 13 12 11 10 F 7 D5602 NSCW455T-TC8 D5601 XX 4 R5102 0 L5101 100uH 40mA? R1.6/P0 R9.2/P0 C5101 0.1u B CCD IMAGER 6 XX MARK:NO MOUNT 1 C5106 0.1u B C5104 XX IC5101 5 EVF&BACK LIGHT A NO MARK:CAMERA REC/PB MODE R :CAMERA REC MODE P :PB MODE R5101 0 4 LB-085 BOARD CCD IMAGER XX MARK:NO MOUNT B 3 2 A 2 1 3 1 CD-431 BOARD C5109 XX C5115 XX G SIGNAL PATH Precautions Upon Replacing CCD imager VIDEO SIGNAL • The CD-431 board mounted as a repair part is not equipped with a CCD imager. When replacing this board, remove the CCD imager from the H CHROMA Y Y/CHROMA REC old one and mount it onto the new one. PB • If the CCD imager has been replaced, carry out all the adjustments for the camera section. • As the CCD imager may be damaged by static electricity from its structure, handle it carefully like for the MOS IC. In addition, ensure that the receiver is not covered with dusts I nor exposed to strong light. 16 4-9 4-10 CD-431/LB-085 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER VA-118 BOARD SIDE A VA-118 BOARD SIDE B For Schematic Diagram • Refer to page 4-73 for printed wiring board. 1 2 3 4 6 5 7 8 10 9 11 12 14 13 15 16 VA-118 BOARD(1/5) EP_4.6V RGB DRIVE,TG(EVF BLOCK) A D_2.8V XX MARK:NO MOUNT NO MARK:EVF/LCD MODE E :EVF MODE L :LCD MODE 1 (4/5) EP_13.3V FB4202 0uH C4211 0.01u B C4209 2.2u 25V REG_GND N.C BGP BLACK_IN PRG FRP PFRP XVP.SAVE VP VP_DC_DET Vcc2 4 VR_DC_DET 3 GND2 GND1 6 VREF 7 Vcc3 COM_OUT 8 8 10 D_2.8V 18 LED_DA 17 XEVF_TALLY_LED 16 LED_ON/OFF 12 15 EVF_GND E2.4/L2.8 14 COM 13 VG 12 VR 11 VB 10 BLK 9 HCK1 8 HCK2 7 HST 6 EN 5 STB 4 VCK 3 VST 2 EVF_GND 1 EVF_VCC COM_DC 11 R4212 100k R4208 68k D4201 1SV290(TPL3) TG24 R4211 1M TG22 TG21 L4202 6.8uH C4207 R4210 560p 68k CH R4209 22k TG23 C4210 0.001u B R4207 47k C4206 0.01u B TG17 C4212 120p CH TG16 TG15 TG14 0 EVF_VD IC4202 CXD3501AR-T4 VDD DWN XCS EN SO STB SI VCK VDO XVD VST 10 TSTEN 24 23 22 21 TG24 E1.4 L0 TG23 E1.4 L0 TG22 E0.1 L0 TG21 SIGNAL PATH 2.8 VIDEO SIGNAL E2.7 L0 TG17 E2.8 L0 TG16 REC E1.4 L0 TG15 PB 0 TG14 4 6 7 8 9 10 11 TST1 +IN -IN PWM LED TST0 GND DETIN 5 12 2.8 3 CMPO HDO 2 E2.8 L0 EVF_HD VCO L VA-118 (1/5) 16 4-11 (PAGE 4-10) 20 19 VDD 0 18 RGT TIMING GENERATOR XSCK THROUGH THE FP-619 FLEXIBLE E2.8 L0 E1.4 L2.8 XPSAVE OSCI E1.4 L2.8 XCSAVE HST IC4202 TST4 TO LB-085 BOARD CN5601 XP_SAVE XC_SAVE RPD E2.8 L0 GND TST2 SHA E1.4 L0 SHA SHB E0.9 L0 SHG E2.8 L0 SHB SHR OSCO BLK 17 42 43 FRP E0.3 L0 VD_SO 25 HCK2 1 VD_SCK1 0 26 SBLK HD EVF_VD R4204 27 HCK1 2.6 VD_SO 28 9 XCS_EVF VD_SCK 29 TST3 EVF_HD EVF_VD 30 11 EVF_HD XCS_EVF 31 XCLP VCO VCO K 2.7 48 47 VD_SO 2.7 32 16 XTG_SO 33 XWRT J 2.7 34 15 XCS_EVF 44 2.8 45 2.7 46 VD_SCK1 35 14 E1.4 L0 36 13 FRP 39 0 40 BLK 41 I E0.9 L0 2.8 E2.7 L0 38 BGP 37 C4218 XX XCLR H E0.9 L0 R4215 1k XRST_VTR (3/5) SHG SHR EVF_VG 2 20P 19 R4214 1M ± 0.5% C4216 2.2u 10V B C4208 0.1u B FB4201 0uH CN4201 EP_4.6V VCO OP_OUT 9 E1.4 L0 7 OP_IN- OP_IN+ BIAS 6 E1.4 L0 5 E1.4 L0 4 N.C SH_R XSH.SAVE 2.8 SHR F 3 (2/5) E6.3/L0 20 COM_IN 2 R4213 47k ± 0.5% C4217 2.2u F E6.3/L0 13 G_IN 3 XEVF_TALLY_LED E13.4 L13.1 14 B_IN 15 XP.SAVE 16 LPF_ADJ RB4202 XX C4215 1u B 17 TRAP_ADJ E6.6/L0 18 IC4201 CXA3289BR-T4 C4214 1u B 19 VR DRIVER Vcc1 R_IN 22 VG_DC_DET 20 IC4201 XCS RB4201 100 E6.6/L0 21 VG SI 1 G VB_DC_DET XSCK C4213 1u B 23 5 XC.SAVE E6.6/L0 24 EXT_DA E1.4 L0 BLK 0 R_INJECT VB E1.4 L0 38 39 40 25 C_BG C4205 0.01u B E 26 R4206 2700 EVF_R 27 SH_A E1.8 L0 28 E0.9/L0 E1.8 L0 29 SH_B C4204 0.01u B 30 SHA E1.8 L0 EVF_B 31 SH_G E2.8 L0 32 E2.8/L0 XP_SAVE 33 E0.9/L0 C4203 0.01u B 34 E0.9/L0 C4201 4.7u B 2.8 E1.2 L0 35 SHB R4203 XX R4202 100k 36 SHG 2.8 D EVF_G 2.7 41 XCS_EVF L4201 10uH 42 2.7 43 XTG_SO 44 2.7 45 R4201 470k VD_SCK1 46 C 0 E2.8 L0 47 XC_SAVE 48 C4202 XX 37 0 B 2.0 R4205 XX FRP BGP E2.7 L0 EP_2.8V 4-12 CHROMA Y Y/CHROMA DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER VA-118 BOARD SIDE A VA-118 BOARD SIDE B For Schematic Diagram • Refer to page 4-73 for printed wiring board. 2 1 VA-118 BOARD(2/5) A HI CONTROL(LE BLOCK) 3 4 5 6 7 8 9 10 11 12 13 14 15 NO MARK:REC/PB MODE R :REC MODE P :PB MODE XX MARK:NO MOUNT BATT_UNREG VTR_UNREG 4 R4109 100k (4/5) BATT_SIG SIRCS_SIG XDS_RESET XSYS_RST XLANC_ON SIRCS_PWM R4111 100k ± 0.5% XCS_DD B R4112 1M ± 0.5% C4114 0.01u B TP_SEL2 HOTSHOE_ID2 HOTSHOE_ID1 D_2.8V EVER_3.0V R4115 470k ± 0.5% C4115 0.01u B Q4101 HN1L02FU(TE85R) SWITCH R4110 100k R4105 0 C4109 33u 4V D4102 UDZSTE-178 VOUT R4116 47k ± 0.5% RB4108 1k C C4116 15p CH C4113 15p CH REG_GND RB4109 100k 0.6 6 2.8 VTR_DD_ON 0.2 D4101 MA111-(K8).S0 BATT_IN 3 0.2 2 XCS_DD 5 1 4 HI_EVER_SO 3.0 HI_EVER_SCK X4101 32.768kHz VOUT RB4105 1k 1 2 4 3 6 5 7 8 LANC_IN R4117 0 LANC_OUT XLANC_PWR_ON XLANC_JACK_IN 0.2 IB_SO XSIRCS_IN 2 3 4 5 6 7 8 9 0.3 LANC_IN SHOE_ON 3.0 INIT_CHARGE_ON BATT_SIG 0 FAST_CHARGE BATT/XEXT HOTSHOE_ID1 (5/5) 8 (3/5) XLANC_ON FAST_CHARGE 3.0 VTR_DD_ON 3.0 TP_SEL1 2.8 IC4101_MAD 2.7 BATT_SIG INIT_CHARGE_ON FAST_CHARGE INIT_CHARGE_ON LINEOUT_V R4119 470 3.0 XPHOTO_STBY_SW BATT_IN C4117 0.1u XCAM_MODE_SW 1.2 R4118 1M XPHOTO_FREEZE XS/S_SW R4120 100k 1.3 2.8 SHOE_ON BATT/XEXT XVTR_MODE_SW X4102 10MHz XEJECT_SW XCS_IC4101 2.9 IC4101_SCK 0 IC4101_SO XSYS_RST XCC_DOWN 3.0 HI_EVER_SCK XPHOTO_FREEZE XS/S_SW XCAM_MODE_SW XVTR_MODE_SW XEJECT_SW XSYS_RST KEY_AD0 LINEOUT_V IC4101_SI R0.7 P0.4 XPHOTO_STBY_SW KEY_AD0 IC4101_SCK LINEOUT_V XCC_DOWN IC4101_SCK IC4101_SO IC4101_SI XCS_IC4101 10 11 12 13 14 15 16 17 18 19 20 XDS_RESET 0 2.6 0 IC4101_SI XCS_IC4101 OSD_V XCHARGE_LED 7 XLANC_PWR_ON LANC_OUT 0.3 HI_EVER_SO SYS_V_OUT N.C XRESET (1/5) LANC_OUT IC4101_SO BT_LED_ON SIRCS_SIG HI_EVER_SCK STRB_LED_ON IR_ON SIRCS_PWM XCS_LCD_DRIVER 1 DIAL_B 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 IB_SI XDS_RST SIRCS_OUT XLANC_ON TP_SEL2 XSYS_RST XCS_DD GND X0A(IN) X1A(OUT) VCC ACV_SENSE BATT_SENSE VTR_DD_SENSE HOT_SHOEID1 IC4101_TXD0 IC4101_MAD OSD_V XDS_RESET IC4101_MAD HOTSHOE_ID2 XLANC_JACK_IN XVTR_MODE_SW XCAM_MODE_SW BATT_INFO_SW XEJECT_SW R4113 4700 RB4106 1K XCC_DOWN XPHOTO_FREEZE XPHOTO_STBY_SW I HOT_SHOEID2 DD_COM/XPRD DIAL_A 3 LANC_IN RB4107 1K 16 4-13 HI_EVER_SO HOTSHOE_ID2 IC4101_RXD0 OSD_V HOTSHOE_ID1 IC4101_SCK0 NEW_DD 3.0 H R4108 XX STROBO_PLUNGER IR_ON XCHARGE_LED C4111 6800p B IC4101_XCS0 1.7 XRESET D4103 UDZSTE-178 XF_TALLY_LED SHOE_ON XCHARGE_LED SIRCS_SIG TP_SEL2 X_TAL TEST 0.4 IR_ON SIRCS_PWM R4107 XX TP_SEL1 X_TAL BATT/EXT R0 P1.4 TP_SEL2 XF_TALLY_LED RB4104 1k TP_OUT_Y C4110 0.01u B RST_X XEVF_TALLY_LED (3/5) 0 XF_TALLY_LED 5 G 0 2.8 TP_SEL1 R4106 47k SHOE_ON 1 XLANC_PWR_ON TP_OUT_Y 3.0 R3.0 P0 R0 P3.0 TP_OUT_X 2 4 6 TEST MB89097PFV-G-153-BND-ER-E1 XLANC_JACK_IN IR_ON BATT/XEXT 1 3 5 0 IC4101 TP_Y GND XRESET TP_OUT_X R4104 100k XLANC_JACK_IN BATT_IN 3.0 BATT_INFO_SW TP_X 0 BATT_INFO_SW 0 XHI_DS_HELP VCC TP_OUT_Y TP_SEL1 SYS_V 3.0 F 2.8 HI CONTROL VTR_DD_ON XS/S_SW CHRGELED TP_OUT_X KEY_AD6 EVF_TALLY 2.8 IC4101 F_TALLY C4101 XX KEY_AD5 PWR_LED R4103 1M KEY_AD4 XLANC_POWER_ON XS/S_SW LCD_COM/XDATA XMEM_ON KEY_AD3 R4124 10k KEY_AD3 XPHOTO_FREEZE R4122 100k KEY_AD2 FAST_CHARGE 3.0 KEY_AD3 KEY_AD1 INIT_CHARGE GND 3.0 KEY_AD2 R4123 1M KEY_AD1 2.8 XCC_DOWN C4112 0.1u B (4/5) VOUT XEVF_TALLY_LED LANC_IN 2 AVREF 6 HI_EVER_SCK XEVF_TALLY_LED LANC_OUT VCC XEJECT_SW 3.0 KEY_AD2 BATT_INFO_SW E KEY_AD0 KEY_AD1 3.0 POWER_SW 2.8 MODE_SW C4107 XX 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 C4103 XX C4108 XX HI_EVER_SO R4121 100k 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 C4105 XX XCS_DD 2.8 0.2 3.0 0.2 0 2.8 1.3 XLANC_ON 3.0 3.0 1.0 3.0 2.5 2.6 2.8 2.8 2.8 D 2.8 R4114 10M 2.8 KEY_AD1 KEY_AD0 KEY_AD3 KEY_AD2 1 3 5 7 2 4 6 8 RB4101 10k BATT_IN VTR_DD_ON 4-14 VA-118 (2/5) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER For Schematic Diagram • Refer to page 4-73 for printed wiring board. 2 3 1 4 5 6 7 9 8 VA-118 BOARD SIDE A 10 13 12 11 VA-118 BOARD SIDE B 15 14 17 16 19 18 20 CN4004 CN4003 VA-118 BOARD(3/5) A S_C_I/O 20P BL_GND 1 SE_GND 2 XCHARGE_LED EP_13.3V 3 KEY_AD1 BL_REG 4 Y/P SENSOR AMP,CONNECTOR(SE,CN BLOCK) CN4005 XX MARK:NO MOUNT KEY_AD1 KEY_AD3 TO CK-129 BOARD CN5208 B 16 15 EVER_3.0V 13 12 XRESET 11 KEY_AD2 10 REG_GND SPSP+ REG_GND TP_L Q4005 RN2902FE(TPLR3) SWITCH KEY_AD2 2.8 9 4 1 SP- 8 Q4003 UNR31A100LS0 SWITCH 6 5 TP_TOP 4 TP_BOT 3 TP_SEL2 2 5 SP+ 7 2.8 3.0 3.0 3 6 0 0 C TP_R 2 LI_3V 1 EP_2.8V 7 EP_2.8V TO PD-188 BOARD(2/2) CN6201 REG_GND 8 PANEL_B 9 THROUGH THE PV-140 HARNESS PANEL_G 10 PANEL_R 11 PANEL_VG 12 PSIG 13 XRST_VTR 14 VD_SCK 15 TP_OUT_Y 3 6 2.8 Q4004 RN1902FE(TPLR3) SWITCH MIC_MONO 16 VD_SO 17 PANEL_VD 18 PANEL_HD 19 XHD_OUT 20 BL_CONT PANEL_G 13 MIC_L ZOOM_MIC_CONT (4/5) PANEL_R PANEL_VG C4001 0.1u MIC_R PITCH_AD P_SIG VST_C_RESET XRST_VTR 1k YAW_AD VD_SCK PANEL_R XCS_LCD VD_SO PANEL_VD PANEL_G PANEL_HD P_SIG PANEL_B XHD_OUT PANEL_VG 2 5 EVER_3.0V XCS_LCD C4006 XX MIC_IN PANEL_B R4002 TP_OUT_X 2.8 LI_3V (4/5) EP_4.6V TP_SEL1 0 9 6 (PAGE 4-25) HP_L_OUT (4/5) HP_R_OUT 5 2.8 3.0 12 BL_REG EP_4.6V BATT_INFO_SW XRESET HP_JACK_IN BL_CONT KEY_AD3 14 BATT_INFO_SW THROUGH THE FP-618 FLEXIBLE (PAGE 4-21) XS_JACK_IN 16P XCHARGE_LED NO MARK:REC/PB MODE S_Y_I/O REG_GND (BL_GND) 3.0 0 PANEL_VD XRST_VTR 4 1 XRST_VTR XHD_OUT VD_SCK SIGNAL PATH CHROMA Y AUDIO SIGNAL Y/CHROMA TP_SEL2 TP_OUT_Y TP_SEL1 REC TP_OUT_X PB TP_OUT_Y E KEY_AD3 SIGNAL PATH XRESET KEY_AD2 PB XRESET XRESET Drum servo (speed and phase) HOTSHOE_ID2 10 LANC_DC HOTSHOE_ID1 LANC_SIG Capstan servo (speed and phase) XF_TALLY_LED (4/5) SIRCS_SIG XLANC_JACK_IN F 11 REG_GND(SHOE_GND) C4002 0.1u B XCC_DOWN XPHOTO_STBY_SW 58 XPHOTO_STBY_SW XPHOTO_FREEZE 57 XPHOTO_FREEZE XS/S_SW 56 XS/S_SW XCAM_MODE_SW 55 XCAM_MODE_SW XVTR_MODE_SW 54 XVTR_MODE_SW TO VC-312 BOARD (14/14) CN1002 XEJECT_SW 53 XEJECT_SW (PAGE 4-64 of LVEL 3) KEY_AD0 52 KEY_AD0 XCS_IC4101 51 XCS_IC4101 LANC_SIG 3 SHOE_UNREG 2 SHOE_UNREG IC4101_SCK LINE_OUT_V 46 MS_LED_ON XDS_RESET 45 XDS_RESET IC4101_MAD 44 IC4101_MAD 43 SP- 42 SP+ CAM_DD_ON 41 REG_GND CAP_ERROR 40 REG_GND CAP_VS 39 REG_GND DRUM_ERROR 38 REG_GND DRUM_VS HOTSHOE_ID1 C4303 22u 4V A C4308 0.047u B REG_GND 1 MIC_R 2 REG_GND 3 MIC_L 4 REG_GND 5 SHOE_MIC_L 6 MIC_IN 7 MIC_MONO 8 ZOOM_MIC_CONT 9 R4305 XX SP+ CAM_DD_ON C4314 4.7u B 14 (PAGE 4-34) RB4301 22k C4302 0.1u B MIC_IN MIC_MONO ZOOM_MIC_CONT 10 9 8 7 6 5 REG_GND 12 HP_R_OUT 13 REG_GND 14 HP_L_OUT 15 REG_GND 16 REG_GND 17 LIA2 18 LIA1 19 VREF2 20 VREF1 21 MS_LED_ON 22 D_2.8V 23 XF_TALLY_LED 24 NS_LED_A 25 NS_LED_K 26 SIRCS_SIG 27 A_4.6V 28 LANC_DC 29 C4005 4.7u B 30 LANC_SIG 31 REG_GND 32 S_Y_I/O 33 REG_GND 34 S_C_I/O 35 XS_JACK_IN 36 CAP_VS DRUM_ERROR 37 REG_GND 3 2 1 36 REG_GND 35 REG_GND REG_GND 34 REG_GND EP_13.3V 33 EP_13.3V CAM_15V 32 CAM_15V CAM_-7.5V 31 CAM_-7.5V AU_4.6V 30 AU_4.6V 29 A_4.75V 4 (4/5) L4301 10uH 0 1.3 1.3 1.3 2.8 VST_C_RESET RP_4.6V 28 RP_4.75V YAW_AD A_4.6V 27 A_4.75V AU_2.8V 26 AU_2.8V RP_2.8V 25 RP_2.8V 24 D_2.8V A_2.8V 23 A_2.8V D_2.8V 22 D_2.8V 21 A_2.8V 20 D_2.8V 19 MT_GND 18 CAM_DD_ON 17 MT_GND 16 CAP_VS 15 CAP_ERROR 14 CAP_VS 13 DRUM_ERROR 12 DRUM_VS 11 MT_5V 10 DRUM_VS HP_R_OUT R4301 1M C4306 0.047u B HP_L_OUT C4304 22u 4V A IC4301 C4309 10u 6.3V R4302 10k C4310 10u 6.3V YAW/PITCH SENSOR AMP MS_LED_ON CAM_DD_ON R4010 XX XF_TALLY_LED R4004 22 15 R4005 22 REG_GND (MT_GND) CAP_ERROR (4/5) 1.4 XLANC_JACK_IN 1.3 C4305 0.047u B HP_JACK_IN 1.4 11 1.4 HP_JACK_IN 0.9 10 0.7 AU_2.8V CAP_ERROR DRUM_VS MIC_L 0 MS_LED_ON PITCH_AD MIC_R R4009 SP- R4304 1M C4307 0.047u B C4301 0.1u B C4003 0.1u B R4303 10k C4312 10u 6.3V 1 36P C4313 XX C4311 10u 6.3V 1.4 SHOE_UNREG THROUGH THE FP-621 FLEXIBLE SIRCS_SIG XLANC_JACK_IN R4006 68 Q4001 2SC5663T2L LED DRIVE 0 R4007 3300 DRUM_ERROR SIRCS_PWM 0.1 2.0 CAP_VS Q4002 UNR32A500LS0 SWITCH R4008 0 DRUM_VS IR_ON MT_5V 9 MT_5V D_1.9V 8 D_1.9V 7 D_1.5V_IC USB_3.1V 6 USB_3.1V D_1.5v_IC 5 D_1.5V_IC 4 D_1.5V 3 VTR_UNREG A_1.5V 2 D_1.5V VTR_UNREG 1 VTR_UNREG S_Y_I/O S_C_I/O XS_JACK_IN FP-620 FLEXIBLE is replaced as a block. So that this PRINTED WIRING BOARD is omitted. IR_2.8V VA-118 (3/5) OSD_V XCC_DOWN 59 IC4101_SO 1.3 SHOE_UNREG TO MA-421 BOARD(2/2) CN5402 16 EVF_B 60 47 11 12 13 14 15 16 17 18 19 20 M EXT_STROBO XSYS_RST OSD_V PASS LANC_SIG 2 I L EVF_R 61 48 VCC 3 1 CN4002 K XSYS_RST 62 LINEOUT_V 1.2 2 1 J EVF_G 63 EXT_STROBO 1.3 4 LANC_SIG VCO 64 HOTSHOE_ID2 CRST 5 HOTSHOE_ID1 SHOE_UNREG XRST_VTR IC4101_SI 1.3 HOTSHOE_ID2 HOTSHOE_ID1 4-15 XHD_OUT AM1 HOTSHOE_ID2 4 PANEL_XVD OUT1 5 3 REG_GND 76 50 OUT2 4 SHOE_ID1 PANEL_VG 77 49 1.2 SHOE_ID2 PANEL_B 78 IC4101_SI AM2 6 PSIG 79 IC4101_SO HO1 EXT_STROBO PANEL_G 80 IC4101_SCK Vref1 EXT_STROBO 7 Vref2 6 8 0.8 5 9 SHOE_MIC_L SHOE_MIC_GND HI1 EXT_STROBO SHOE_UNREG_GND HO2 SHOE_MIC_GND (2/5) 0.6 SHOE_MIC_L 7 8 D4002 MAZW082H0LS0 LO1 SHOE_UNREG_GND 8 6 10 HI2 9 7 10P SHOE_UNREG_GND LO2 8 SHOE_MIC_L SHOE_MIC_GND SHOE_UNREG_GND CN4001 GND SHOE_UNREG_GND LIA1 10P 10 (5/5) REG_GND 81 65 EVF_B SIRCS_PWM PANEL_R 82 66 HOTSHOE_ID1 IR_ON YAW_AD 84 83 VD_SCK EXT_STROBO LIB1 FLEXIBLE 8P SIRCS_PWM VST_C_RESET 85 G EVF_R XLANC_JACK_IN PITCH_AD 86 67 VCO SIRCS_SIG MIC_R 87 VD_SO XRST_VTR XF_TALLY_LED REG_GND 88 68 (2/5) HOTSHOE_ID2 ZOOM_MIC_CONT 89 EVF_XHD VD_SCK SHOE_UNREG D4001 MAZW082H0LS0 FP-620 IR_ON KEY_AD2 MIC_L 90 69 EVF_VG 5 LIA2 REC/PB XRESET REG_GND 91 XCS_EVF EVF_G LIB2 REC BATT_INFO_SW MIC_MONO 92 70 VD_SO EVF_B EVF_B MIC_IN 93 EVF_XVD EVF_R EVF_R KEY_AD1 HP_R_OUT 94 71 EVF_HD EVF_G EVF_G HP_L_OUT 95 PANEL_XHD VCO VCO TP_OUT_X BATT_INFO_SW INTELLIGENT ACCESSORY SHOE (1/5) HP_JACK_IN 96 72 XCS_EVF EVF_VG XCHARGE_LED KEY_AD3 H EVF_HD XS_JACK_IN 97 XCS_LCD EVF_HD EVF_VG TP_SEL1 XCHARGE_LED KEY_AD1 G 2 TP_SEL2 S_Y_I/O 98 73 EVF_VD XCS_EVF XCS_EVF S_C_I/O 99 75 PANEL_HD EVF_VD EVF_VD VIDEO SIGNAL 100 4-16 B TO B 74 VD_SO VD_SO IC4301 UPC6756GR-8JG-E2 D XCS_LCD VD_SCK 100P DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER For Schematic Diagram • Refer to page 4-73 for printed wiring board. 2 3 1 VA-118 BOARD(4/5) A 4 6 5 7 8 VA-118 BOARD SIDE A 10 9 11 VA-118 BOARD SIDE B 12 14 13 15 16 17 18 19 XX MARK:NO MOUNT 21 BATT_UNREG NO MARK:REC/PB MODE R :REC MODE P :PB MODE DC/DC CONVERTER(DD BLOCK) 20 VTR_UNREG D_2.8V 4 (2/5) 12 (3/5) 15 (3/5) 1 (1/5) REG_GND BL_REG EP_2.8V VTR_UNREG EP_4.6V C/D_VS 16 (5/5) B REG_GND (BL_GND) BL_REG_UNREG VTR_UNREG BATT_UNREG REG_GND REG_GND IN1 D_1.5V_IC 13 (3/5) 1.6 R4513 33k R4511 27k 1 2 BL_CONT L4502 22uH 3 6.5 4 5 2 1 4 5 Q4504 CPH5812-TL-E SWITCHING 8.3 IR_2.8V C4538 22u 6.3V A C4560 4.7u IN7 C4559 0.1u A_1.5V L4521 4.7uH L4508 4.7uH C4530 4.7u 6.3V C IN2 5.7 R4519 0 IN3 2.9 IN4 R4507 0 4.7 CAP_VS R4508 0 1.1 DRUM_VS R4509 0 2.4 3.0 XCS_DD G 0 HI_EVER_SO 3.0 HI_EVER_SCK C4501 0.1u B R4501 30k C4502 0.1u B 3.0 0.7 0 3.0 VOUT 2.5 1.2 FB7 -INE7 2 2 1 GND0 out7 -INE1 13 -INS8 OUT6 OUT5 IN1 IN2 OUT4 IN3 IC4502 IN4 DC/DC CONVERTER OUT3 12 OUT2 OUT1 IN5 IC4502 MB44A120APFV-G-BND-ER IN6 VCC0 VCC1 LD DIN LANC_DC CLK SENSE VCONT RST LANC_SIG RT CSCP DATA_IN SEL WAKE_UP BATT_IN C4522 4.7u 2.5 8.3 R4525 8.3 R4524 5.6 2.2 8.3 8.3 7.3 CAP_ERROR (3/5) CAM_DD_ON LANC_DC R4526 33 D4502 MA728-(K8).S0 Q4527 XX C4505 0.047u B LANC_SIG C4541 4.7u B C4509 0.1u B C4507 0.1u B CAP_ERROR C4511 C4514 0.1u 0.1u B B C4512 C4515 1u 1u B B A_4.6V RP_4.6V 3.1 Q4508 CPH5812-TL SWITCHING Q4514 2SB798-T1-DLDK USB 3.1V REG C4518 10u B 3.0 0.3 C4519 XX 5.0 MT_5V DRUM_VS 2.5 2 L4507 33uH 3 C4561 XX 5 4 Q4509 CPH5815-TL-E SWITCHING 8.3 5.0 7.1 C4536 4.7u 10V 6.0 1.2 1 8.4 4 2 3 LANC_SIG LANC_DC 3.8 D4503 DAN222MT2L 4.7 Q4510 CPH5819-TL-E SWITCHING 4 7.1 0.7 R4551 10k ± 5% R4545 4700 REG_GND (MT_GND) R12.2/P0 C4537 2.2u CAM_15V R4541 100k R4537 12k D4507 MA4ZD03001S0 5 1 R4550 6800 ± 0.5% Q4517 2SA207800LS0 L4510 10uH R4523 100k 3 5 C4552 XX C4527 2.2u B 6 2 Q4518 UP04501008S0 IN7 L4501 33uH R4549 22k ± 5% Q4516 2SA207800LS0 DRUM_VS 1 C4554 4.7u B 7.6 R4540 47k 2.8 Q4514,4518 MT 5V SWITCH 8.3 16.1 Q4513 2SC584600LS0 EP 13.3V REG 16.1 R15.5/P16.0 R4542 XX 4.7 R12.2/P0 6 3 2 1 R4538 100k C4540 1u C4528 1u C4557 2.2u F R2.7/P0 R4539 47k R2.2/P0 C4551 0.1u B Q4515,4517,4519 CAM 15V SWITCH R4546 22k Q4520 2SC584600LS0 C4520 1u R4543 100k R4547 22k CAM_DD_ON R4554 6.8k ± 0.5% R-6.5/P0.4 R-8.0 P-8.4 R-7.4 P-8.3 Q4521 UP04401008S0 Q4520,4521 CAM -7.5V SWITCH CAP_VS DRUM_VS R4553 39k ± 0.5% R4.1 P4.3 Q4515 2SC584600LS0 L4520 4.7uH CAM_-7.5V EP_13.3V C4555 4.7u F R4.7 P0 4 13.1 C4529 4.7u 10V R4552 100k ± 0.5% 5 Q4519 UP04501008S0 13.8 CAM_DD_ON DRUM_VS C4558 10u 6.3V A AU_4.6V IC4504 C4535 4.7u 10V 5 4 D4504 MA4ZD03001S0 C4506 0.047u B DRUM_ERROR CAP_VS K A 7.3 C4523 2.2u B XRESET 14 L4506 22uH C4526 4.7u 4.7 XRESET DRUM_ERROR CAP_VS 1 7.1 5.6 5.6 LANC_OUT LANC_IN XLANC_ON XRESET BATT_IN LANC_SIG R4564 15k ± 0.5% USB_3.1V 1.1 2 3 0 EVER_3.0V (3/5) 0.7 Q4525 UP04501008S0 R4562 470 CAP_VS Q4526 MCH3335-TL-E SWITCH 6.5 (3/5) LANC_DC 10 4 4.7 1.3 5.3 EVER_3.0V J 2.8 3.5 VTR_DD_ON LI_3V 1.4 1 IC4504 TK11131CSCL-G C4562 0.01u B 7.0 XLANC_PWR_ON 0 0.3 3.1 3.0 3.0 7.6 3.0 3.0 3.1 3.0 I 5 1.2 6.0 DATA_OUT XCTL2 OUTC3 RESET VIN VOUT CS VRO CTL1 VBAT CDET VREF 2.5 4.7 R4567 0 9 L4519 4.7uH 2.2 3 6 2 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 2.4 BATT_IN XLANC_ON CS XLANC_ON VR (2/5) R4503 4700 GND 6 LANC_IN REG_3V XLANC_PWR_ON 1.2 H LANC_IN 3.3 LANC_OUT Q4507 XN0NE9200L SWITCHING 45 L4518 4.7uH C4533 4.7u 6.3V R3.8/P3.2 LANC_OUT XLANC_PWR_ON L4505 33uH 3 8.3 FB1 1 3.5 Q4524,4525 D 1.9V SWITCH R4563 6.8k ± 0.5% 2.2 C4543 10u 6.3V A C4545 10u 6.3V A C4547 10u 6.3V A C4549 10u 6.3V L4517 4.7uH 4.7 DTC6 0.9 C4517 0.047u C4516 0.022u 0.7 0.8 0.8 FB5 -INE6 +INE6 3 4 FB6 C4513 0.022u 0.6 R4512 10k C4510 330p 0.3 1.2 0.3 -INE5 1.0 FB4 +INE5 -INE4 FB3 -INE3 +INE2 5 IN4 2.2 R-6.5/P0.4 5.7 6 D_1.9V 2.8 R4561 100k L4516 4.7uH 5 R4505 0 R4506 0 7 Q4506 CPH5812-TL SWITCHING AU_2.8V Q4524 2SA1162-YG-TE85L 4 IN2 IN1 5 1 1.6 C4532 4.7u 6.3V A_2.8V D_2.8V 2 R4504 0 L4515 22uH L4504 22uH 3 F 1 5.3 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 1.2 -INE2 FB2 0.6 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 R4502 1k 8 L4513 4.7uH 2.9 2 RP_2.8V C4542 10u 6.3V A C4544 10u 6.3V A C4546 10u 6.3V A C4548 22u 6.3V A C4550 68u 4V B L4512 4.7uH L4514 4.7uH 3 8.3 9 L4511 4.7uH C4539 10u 10V A IN3 R4521 XX R4516 1k R4518 9100 Q4505 CPH5815-TL-E SWITCHING C4521 4.7u R4517 3900 ± 0.5% R4522 0 R4515 1k 16 15 14 13 12 11 10 C4503 0.022u 8.3 4 0.8 1.2 1.4 E 1.4 1.1 R4510 4700 C4504 4700p C4508 0.01u R4514 39k C4531 4.7u 10V 2.5 R4520 47k ± 0.5% DRUM_ERROR CAP_ERROR D L4509 4.7uH L4503 22uH 3 3 6 5 4 1 R0.5 P0 R4555 100k ± 0.5% R4556 10k ± 5% 2 R-0.1 P0.3 C4553 4.7u F R4557 220k ± 0.5% EP_2.8V D_2.8V REG_GND 16 EP_4.6V EP_13.3V SIGNAL PATH REC REC/PB PB Drum servo (speed and phase) Capstan servo (speed and phase) 4-17 4-18 VA-118 (4/5) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER VA-118 BOARD SIDE A VA-118 BOARD SIDE B For Schematic Diagram • Refer to page 4-73 for printed wiring board. 2 1 4 3 5 6 7 9 8 10 11 VA-118 BOARD(5/5) POWER IN,CHARGE(FU BLOCK) A XX MARK:NO MOUNT NO MARK:REC/PB MODE BATT_SIG BATT/XEXT FAST_CHARGE 7 (2/5) 16 (4/5) 11 (3/5) INIT_CHARGE_ON SHOE_ON F4605 1.4A/32V B L4601 4.7uH BL_REG_UNREG F4604 1.4A/32V DC IN C/D_VS F4603 1.4A/32V 3P 1 ACV_GND 2 BATT/XEXT 3 LF4602 XX R4601 1k 8.0 C C4601 0.1u B C4602 0.1u B LF4601 XX R4604 100k BT901 BATTERY TERMINAL 2 S 3 7 6 R4608 1200 R4607 10 R4606 XX 1 D 8.3 8 S VTR_UNREG F4601 1.4A/32V Q4602 UPA1858GR-9JG-E2-A SWITCH 3.0 4G D 5 8.0 G 8.3 BATT_UNREG F4602 1.4A/32V Q4603 2SB798-T1-DLDK ACV_UNREG 8.1 CN4602 Q4608 TPC6101(TE85R) SHOE UNREG SWITCH C4604 22u 16V TA B C4605 22u 16V TA B 8.3 C4606 22u 16V TA B D 1 BATT_SIG 2 BATT_GND 3 R4609 6800 D4602 1SS383(T5RSONY1) C4603 0.022u B 8.0 R4611 1k 0.1 3.0 8.0 0 3 R4614 1M 8.3 BATT_UNREG D4601 MAZW082H0LS0 S 3P C4607 1u B R4615 10k 7.7 CN4603 6 5 2 1 4 D4603 1SS387-TPL3 Q4603,4604 CHARGE ON SW 8.3 0 0 R4605 1M D4604 1SS387-TPL3 Q4604 UNR32A300LS0 REG_GND Q4601 SSM3K03FE(TPL3) SWITCH E Q4610 UNR32A300LS0 SHOE_UNREG SHOE ON SW REG_GND (SHOE_GND) Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. F 16 VA-118 (5/5) 4-19 4-20 Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER CK-129 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-77 for printed wiring board. 2 1 3 4 5 6 7 8 9 10 11 12 CK-129 BOARD A FUNCTION SWITCH XX MARK:NO MOUNT 16P (PAGE 4-15) C 14 TP_TOP 13 TP_L 12 REG_GND 11 SP+ 10 SP- 9 REG_GND 8 KEY_AD2 7 XRESET 6 BATT_INFO_SW 5 EVER_3.0V 4 KEY_AD3 KEY_AD1 XCHARGE_LED TP_L BT5201 TP_TOP TP_R LITHIUM BATTERY TP_L D5208 XX TP_BOT 3 TP_L 4 TP_R CN5205 SP+ SP- SP- KEY_AD2 2 C5202 XX SP+ 1 SP(+) 2 SP(-) TO PD-188 BOARD(2/2) CN6202 THROUGH THE PV-140 HARNESS (PAGE 4-25) 2P SP901 SPEAKER D5205 MAZW082H0LS0 R5201 1k BATT_INFO_SW KEY_AD3 3 D5203 UDZSTE-178.2B KEY_AD1 2 2 1 4 3 LN5202 CH GND FP-626 XCHARGE_LED 1 CN5209 LN5201 CH GND D C5201 XX D5207 XX TP_BOT TP_TOP 3 15 TP_BOT 2 THROUGH THE FP-618 FLEXIBLE TP_R TP_BOT TP_R 1 1 TO VA-118 BOARD (3/5) CN4005 TP_TOP 16 2 B 4P CN5210 LI_3V 1 CN5208 SIGNAL PATH S5203 RESET KEY_AD2 S5207 (PANEL_XCLOSE/OPEN) KEY_AD3 FLEXIBLE 6P 6 REG_GND REG_GND 6 5 REG_GND REG_GND 5 4 PANEL_REV PANEL_REV 4 3 PANEL_REV PANEL_REV 3 2 REG_GND REG_GND 2 1 REG_GND REG_GND 1 3 2 1 4 S101 (PANEL_REVERSE_SW) AUDIO SIGNAL REC CONTROL SWITCH BLOCK (CF-CX4000) PB E R5223 220 XCHARGE_LED CN5207 6P D101 6 XCHARGE_LED XCHARGE_LED 6 CHG(charge) BATT_INFO_SW D5209 XX EVER_3.0V 4 BATT_INFO_SW 3 KEY_AD1 2 N.C. 1 REG_GND EVER_3.0V 5 BATT_INFO_SW 4 KEY_AD1 3 N.C. 2 REG_GND 1 1 2 KEY_AD1 5 F GND(SEIDEN) S101 S102 BACK LIGHT DSPL /BATT INFO CONTROL SWITCH BLOCK(CF-CX4000),FP-626 FLEXIBLE are replaced as a block. So that there PRINTED WIRING BOARD is omitted. 16 4-21 4-22 CK-129 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER PD-188 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-79 for printed wiring board. 2 1 3 5 4 6 8 7 9 10 11 12 13 15 14 16 17 PD-188 BOARD(1/2) DRIVER,TG(RGB/TG BLOCK) A XX MARK:NO MOUNT Q6004 2SA207800LS0 SWITCHING NO MARK:REC/PB MODE 13.2 EP_13.3V 1 (2/2) C6009 1u 25V TA FB6002 0uH EP_2.8V C6010 0.01u B 13.1 12.5 0.01u C6005 0.01u 1.8 1.8 PANEL_R 1 IC6001 CXA3289BR-T4 R_DC_DET TRAP_ADJ GND2/N.C. 6 LPF_ADJ GND1 XP.SAVE VREF B_IN Vcc3 5 G_IN COM_OUT R_IN COM_IN 4 1 2 3 4 5 6 7 8 9 10 11 23 22 21 20 R6018 12k VG C6017 1u B 2.8 6.9 VR 2.8 TG14 C6018 1u B R6016 1k 0.1 2.8 C6020 XX VP VB VR VG Vcc1 19 VR 7.0 VB C6016 1u B 18 G_DC_DET DRIVER 2.7 17 2 IC6001 XCS 7.0 D6002 XX 16 VG 24 13.2 Vcc2 2.8 P_DC_DET 2.8 VP 1.4 XVP.SAVE 6.9 FRP PFRP PFRP 1.4 FRP 0 PRG N.C 2.8 PRG BGP EXT_DA 2.7 N.C./R_INJECT BGP B_DC_DET XSCK Q6003 UNR32A300LS0 INVERTER 15 38 39 3 XC.SAVE C6021 XX 13.2 14 C6004 PANEL_G VB 13 0.01u N.C./C_BG C6019 4.7u B C6024 0.1u B R6021 150k CN6001 COM_DC E C6003 25 VCO PANEL_B 26 OP_OUT 1.7 27 OP_IN- 2.8 28 OP_IN+ XP.SAVE 1.2 29 BIAS 2.8 R6001 68k 30 GND/N.C. R6002 470k 31 SH_A C6001 4.7u B 32 SI R6017 47k VP 33 SH_B C6002 10u 6.3V A 34 SH_G 2.8 35 SH_R D 36 XSH.SAVE 2.8 40 XCS_LCD 41 2.6 42 XTG_SO 43 2.8 44 VD_SCK1 45 2.8 46 L6001 10uH 0 XC.SAVE 47 C6006 XX 48 C 37 0 2.5 R6005 XX C6014 1u B BLACK_IN B BLK REG_GND RB6001 100 RB6002 XX 12 TG24 6.5 2.6 1.4 1.4 1.4 1.4 0.9 0.9 2.8 2.8 F 0.9 TG23 TG22 TG21 SH4 SH3 SH2 SH1 FB6001 0uH R6007 47k G D6001 1SV290(TPL3) C6012 0.1u B C6011 560p R6009 68k C6013 C6015 0.001u 68p B R6012 1M R6010 22k C6023 1u B R6011 68k L6002 6.8uH D6003 RD3.3UM-T1B TG20 PANEL_VG R6006 2700 R6013 100k TG18 24 TEST1 23 COM 22 VST 21 VCK 20 EN 19 DWN 18 VDD 17 VSS 16 VDOG 15 VVSSG 14 CS 13 WIDE 12 HST 11 REF 10 SOUT 9 CRext 8 HCK2 7 HCK1 6 PSIG 5 G 4 R 3 B 2 RGT 1 TEST2 PSIG PSIG XCS_LCD 2.8 XTG_SO 2.6 VD_SO 2.8 2.8 25 TG15 IC6002 WIDE 23 22 21 EN DWN 20 VST VCK 24 XSTBY 26 OSCO OSCI 27 1.4 XP.SAVE XC.SAVE 1.4 2.8 RPD XC.SAVE 1.4 2.8 SH3 0.9 0.9 SH2 SH4 TEST SHR 28 9 PFRP XSCK VDD XCS SO SI VDD IC6002 CXD3512R-T4 HST HCK2 HCK1 RGT 19 TIMING GENERATOR XWRT BL_ON DETIN GND TST0 LED PWM TEST TEST TEST 1 2 3 4 5 6 7 8 9 10 11 12 0 PANEL_HD 2.8 HDO XCS_LCD 2.6 0 0.3 VD_SCK1 R6023 TG24 1.4 TG23 2.5 TG22 2.8 TG21 0.2 TG20 (with Touch PANEL) SIGNAL PATH R6022 820k VIDEO SIGNAL CHROMA 2.8 R6019 1M 0 TG18 1.4 TG17 1.4 TG16 2.8 TG15 2.8 LCD901 2.5INCH COLOR LCD UNIT TG14 REC R6015 10k Q6005 2SA207800LS0 LEVEL SHIFT Q6002 HN1B04FE-Y/GR(TPLR3) 7.5 SWITCH 6.9 5 13 PB 1.6 1.0 4 6 13.1 7.5 2 C6022 0.1u B R6020 68k 6.9 R6014 10k 7 VD_SO 0 3 1 TSTEN VD_SO VD_SCK 14 POFF 8 2.8 XVD R6004 1K PANEL_VD PANEL_VD VDO HD PANEL_HD PANEL_HD 2.8 47 PANEL_VD 48 XHD_OUT XHD_OUT XCS_LCD 29 PANEL_VG PANEL_VG K 30 18 J 2.8 31 17 C6008 0.01u B FRP 32 PSIG 16 VD_SCK1 SBLK 33 TG16 15 2.8 37 1.4 38 PFRP 39 1.4 40 FRP 41 0 PRG 42 BLK XCLP 43 2.8 44 2.7 PRG 45 BGP 46 I 34 VSS 35 XCLR 36 SHA C6007 0.1u SHB (2/2) SHG 2 2.8 H R6003 1k 0.9 XRST_VTR 2.8 SH1 TG17 24P 6.4 6.4 5 2 Q6001 13.1 HN1B04FE-Y/GR(TPLR3) SWITCH XHD_OUT 1 3 6.9 64 6.9 L DAC BL_ON R6008 47k LED DETIN 16 PD-188 (1/2) 4-23 4-24 3 (2/2) Y Y/CHROMA DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER PD-188 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-79 for printed wiring board. 2 1 3 4 5 6 7 8 9 10 11 12 PD-188 BOARD(2/2) BACKLIGHT DRIVE(BL BLOCK) A XX MARK:NO MOUNT NO MARK:REC/PB MODE CN6201 20P B BL_GND 1 SE_GND 2 EP_13.3V 3 BL_REG 4 BL_CONT 5 EP_4.6V 6 EP_2.8V 7 L6101 82uH C6101 4.7u B R6106 1800 1/10W 5 TO VA-118 BOARD (3/5) CN4003 THROUGH THE PV-140 HARNESS (PAGE 4-16) C REG_GND 8 PANEL_B 9 PANEL_G 10 PANEL_R 11 PANEL_VG 12 PSIG 13 XRST_VTR 14 VD_SCK 16 VD_SO 17 PANEL_HD XHD_OUT C6103 0.015u B PANEL_VG 5.4 VD_SCK T6101 3 -0.7 -0.7 2 PANEL_HD XHD_OUT (1/2) R6109 XX IC6102 IC6102 TA75S393F-TE85R CURRENT DETECT Q6104 XX R6101 LN6101 PSIG CH_GND 1.9 XX C6102 XX N.C. 5 N.C. 4 N.C. 3 BL_LOW 2 LED 1 LED_GND R6108 22k C6104 0.1u B R6110 470 R6105 22k D6101 XX XRST_VTR VD_SCK R6102 XX XHD_OUT 0 0 2.8 4 BL_ON 3 F 4P TP_TOP 1 TP_BOT 2 TP_L 3 TP_R 4 VCC COM CH0 INH CH1 VEE A GND 2.8 8 2.5 (1/2) 2 XHD_OUT 3 2.5 7 PANEL_HD XX 1 PANEL_VD PANEL_VD PANEL_HD D6102 IC6101 TC7W53FU(TE12R) R6103 10k VD_SO VD_SO R6107 10k 2.8 6 XCS_LCD 0 5 VD_SCK XCS_LCD (PAGE 4-22) 6 ND901 BACKLIGHT 3 DETIN PANEL_VG PSIG THROUGH THE PV-140 HARNESS N.C. D6103 MA111-(K8).S0 2 2.8 PANEL_R PANEL_R CN6202 N.C. 7 1 5 PANEL_G PANEL_G TO CK-129 BOARD CN5210 N.C. 8 0.3 VCC 4 PANEL_B 2 9 D6104 XX R6104 180k PANEL_B XRST_VTR 10P BL_HIGH EP_2.8V 2.8 (1/2) C6105 12p 3.15kV Q6103 XX REG_GND E 10 Q6102 CPH5504-TL-E SWITCHING PANEL_VD EP_13.3V PANEL_VG INVERTER TRANSFORMER VD_SO 1 10 5.4 5 4 1 XCS_LCD 20 CN6101 4 XRST_VTR 19 D 3 PSIG 18 6 2 PANEL_G PANEL_R 15 XCS_LCD PANEL_VD 1 PANEL_B IC6101 SELECT SWITCH DAC SIGNAL PATH Q6101 UNR32A300LS0 SWITCH VIDEO SIGNAL CHROMA Y Y/CHROMA LED G REC CN6203 TOUCH PANEL (included LCD panel) H PB 6P TP_R 1 TP_L 2 N.C. 3 TP_BOT 4 TP_TOP 5 N.C. 6 D6201 UDZSTE-178.2B Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 16 4-25 4-26 Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. PD-188 (2/2) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER JK-242 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-81 for printed wiring board. 2 1 3 4 6 5 7 8 JK-242 BOARD A A.V/DV IN/OUT XX MARK:NO MOUNT FB5301 J5301 AUDIO/VIDEO 0uH 2 R5306 0 FB5302 0uH VD5302 B VD5303 VD5301 CN5302 4P DV Interface AUDIO_R_I/O 13 AV_JACK_IN 12 VIDEO_I/O 11 REG_GND 10 NTPB TPB 2 9 TPB NTPA 3 8 REG_GND TPA 4 7 TPA 6 NTPA 5 REG_GND 4 USB_DET 3 USB_D- 2 USB_D+ 1 REG_GND 5P 5 ID 4 D+ 3 D- 2 VCC 1 2 1 3 1 D5302 01ZA8.2(TPL3) TO VC-312 BOARD(8/14) CN1001 THROUGH THE FP-625 FLEXIBLE (PAGE 4-52 of LEVEL3) R5304 100k 2 USB GND D REG_GND 14 1 LF5301 0uH (USB) 15 NTPB C CN5301 16P AUDIO_L_I/O 1 D5305 XX CN5303 16 D5303 xx R5305 150k D5304 1SS357(T3SONY1) LN5301 CH_GND LN5302 E SIGNAL PATH VIDEO SIGNAL CH_GND CHROMA 16 REC PB JK-242 4-27 4-28 Y Y/CHROMA AUDIO SIGNAL DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER 2 1 3 4 4-3. PRINTED WIRING BOARDS 5 6 7 8 CONTROL SWITCH BLOCK (FK-CX4000) A XX MARK:NO MOUNT S071 PHOTO LOCK RV001 (ZOOM) (PHOTO FREEZE) (PHOTO REC) CN1004 B 12P T W LND001 N.C. 1 XPHOTO_FREEZE 2 KEY_AD0 3 REG_GND 4 LND002 LND003 S2 LND004 TO VC-312 BOARD (14/14) CN1003 (PAGE 4-63 of LEVEL 3) C START/STOP LND005 ZOOM_AD S1 5 POWER LND006 D_2.8V 6 XEJECT_SW 7 LND007 S072 OPEN / EJECT MEMORY LND008 XS/S_SW 8 XCAM_STBY_SW 9 XPHOTO_STBY_SW 10 REG_GND 11 XVTR_MODE_SW 12 LND009 CAMERA LND010 LND011 OFF(CHG) LND012 VCR CONTROL SWITCH BLOCK (FK-CX4000) is replaced as a block. So that these PRINTED WIRING BOARD are omitted. D 16 4-29 4-30 FK-CX4000 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MA-421 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-83 for printed wiring board. 3 4 MA-421 BOARD(1/2) 5 R5501 2200 6 7 C5522 XX R5506 R5518 XX C5520 0.1u B 2200 R5514 XX C5517 100p R5529 XX C5536 XX C5538 XX B R5511 1k B R5520 3300 R5533 0 0.1u 1.4 0 1.4 2.5 C5503 0.022u B 1.4 4 1.4 3 GND MIC 1.4 2 NIT_MIC_R R5527 3300 12 R5528 XX 1.4 1 GND MIC 1.4 R-CH INT_MIC_L C5518 XX 1.4 L-CH 4P C5514 0.001u B C5513 100p CH R5515 10k R5512 XX C5537 0.047u R5526 XX C5528 0.0068u B 11 C5523 CN5401 C5502 0.01u B CH C5527 XX R5531 0 R5507 2200 MIC901 MIC UNIT 10 C5535 0.047u B XX MARK:NO MOUNT NO MARK:REC/PB MODE B 9 R5502 2700 MIC AMP A 8 1.4 2 1 F 6 7 8 9 1.4 1.4 1.4 C5515 XX R5522 0 L5501 100uH SHOE_MIC_L AU_2.8V 1.4 MIC_L 2.8 MIC_MONO 2.6 2.0 REG_GND R5524 100k 2.8 0.8 0.1 ZOOM_MIC_CONT C5532 22u 6.3V TA A C5531 XX C5533 XX R5525 12k REG_GND C5539 XX 2.5 MIC_IN 1.4 2.8 R5530 0 MIC_R 10 11 12 SIGNAL PATH AUDIO SIGNAL C5521 0.1u B REC R5517 10k PB R5534 0 R5521 3300 R5516 XX C5524 XX R5532 0 R5519 XX 4-31 13 14 15 16 17 18 19 20 21 22 23 24 5 HPF_AMP_IN_R 4 HPF_OUT_R 3 MTX_AMP_OUT_R MTX_AMP_IN_R 2 NC 2.8 1.4 1 SUB_IN_R 1.4 SUB_SIG_OUT_R R_OUT INVT_OUT_R HPF_ON/OFF SG_IN_R GND C_1/2VCC R5509 6800 16 HPF_OUT_L MTX_AMP_OUT_L EXT_MIC R5513 XX MA-421 (1/2) VCC MIX_OUT C5516 100p CH C5519 0.1u B G MTX_AMP_IN_L INVT_OUT_L AMP_OUT_L MODE_CTL_2 EXT_IN_L REG_2.5V INT_IN_L SUB_IN_L SG_IN_L ZOOM_POSI IC5501 BH7870AKV-E2 C5504 0.01u B C5510 0.001u B ZOOM_BAL MIC AMP NC C5511 10u 6.3V A C5512 100p CH MIC_MONO AMP_OUT_R C5501 0.022u B E ZOOM_AMP_IN 1.4 1.4 IC5501 ZOOM_AMP_OUT MODE_CTL_1 1.4 L_OUT 1.4 R5508 6800 NC EXT_IN_R R5505 0 R5503 10k LND5401 A 0 NC 2.2 D 1.4 1.4 C5505 0.01u B VD5402 HPF_AMP_IN_L GND R5510 1k R5504 4700 FB5405 0uH C_REG REG_2.5V VD5401 1.2 1.4 MIC (PLUG IN POWER) INT_IN_R J5401 2.5 C5506 10u 6.3V A FB5406 0uH 48 47 46 45 44 43 42 41 40 39 38 37 C SUB_SIG_OUT_L 36 35 34 33 32 31 30 29 28 27 26 25 C5529 0.0068u B C5530 XX 4-32 1 (2/2) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MA-421 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-83 for printed wiring board. 2 1 3 4 5 6 7 8 9 10 11 12 MA-421 BOARD(2/2) A Y/P SENSOR,V/A IN/OUT CN5402 XX MARK:NO MOUNT NO MARK:REC/PB MODE XS_JACK_IN S_C_I/O S_Y_I/O LANC_SIG B XLANC_JACK_IN D5405 CL-330IRS-X-TU (NIGHTSHOT LED) 4.6 J5404 S_Y_I/O Y G R5407 0 XS_JACK_IN S VIDEO C R5408 S_C_I/O G C 0 IC5401 RS-670 4.6 LANC_DC R5405 47 XS_JACK_IN 2 S_C_I/O 3 REG_GND 4 S_Y_I/O 5 REG_GND 6 LANC_SIG 7 XLANC_JACK_IN 8 LANC_DC 9 A_4.6V 10 SIRCS_SIG 11 NS_LED_K 4 3 12 NS_LED_A IC5401 OUT VCC 13 XF_TALLY_LED GND GND 14 D_2.8V REMOTE COMMANDER RESIEVER 2 1 15 MS_LED_ON 16 VREF1 17 VREF2 18 LIA1 19 LIA2 20 REG_GND 21 REG_GND 22 HP_L_OUT 23 REG_GND 24 HP_R_OUT 25 REG_GND 26 HP_JACK_IN 27 AU_2.8V 28 ZOOM_MIC_CONT 29 MIC_MONO 30 MIC_IN 31 SHOE_MIC_L 32 MIC_GND(REG_GND) 33 MIC_L 34 MIC_GND(REG_GND) 35 MIC_R 36 MIC_GND(REG_GND) 37 N.C. D5408 UDZSTE-178.2B C5404 4.7u B R5406 1800 VREF1 VREF2 D5404 MA111-(K8).S0 LIA1 D5407 TLRMV1021(T15SOY.F) (ACCESS) VD5408 37P 1 LIA2 VD5407 LN5402 HP_L_OUT TO VA-118 BOARD(3/5) CN4002 THROUGH THE FP-621 FLEXIBLE (PAGE 4-15) CH_GND D HP_R_OUT R5402 1800 FB5408 J5402 FB5409 LANC 0uH 0uH LANC_DC LANC_SIG HP_JACK_IN ZOOM_MIC_CONT D5401 TLRMV1021(T15SOY.F) MIC_MONO (TALLY) MIC_IN XLANC_JACK_IN E FB5407 0uH SHOE_MIC_L R5403 0 VD5403 MIC_L D5409 UDZSTE-178.2B D5403 MAZW082H0LS0 MIC_R FB5410 0uH F HP_R_OUT HP_L_OUT VD5409 VD5410 FB5411 0uH FB5401 0uH FB5402 0uH LIA2 VREF2 MIC_R MIC_R D5410 UDZSTE-178 REG_GND MIC_L MIC_L SE5401 (YAW SENSOR) J5405 HP_JACK_IN Vref REG_GND SHOE_MIC_L GND SHOE_MIC_L MIC_IN (headphones) Vout (1/2) G MIC_MONO VCC MIC_MONO R5401 0 ZOOM_MIC_CONT ZOOM_MIC_CONT LIA1 FB5404 SE5402 (PITCH SENSOR) SIGNAL PATH VIDEO SIGNAL CHROMA H 1 MIC_IN Y Y/CHROMA AUDIO SIGNAL Vref GND Vout VCC AU_2.8V 0uH VREF1 FB5403 0uH REC PB 16 4-33 4-34 MA-421 (2/2) DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER FP-467, FP-468, FP-228 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-71 for flexible wiring board. 4 5 6 7 (PAGE 4-57 of LEVEL 3) M902 LOADING MOTOR M S902 MODE SWITCH C FP-228 15 16 17 18 19 20 21 22 23 24 25 26 XCCDOWN_SW TAPE_LED_K TAPE_LED_A TAPE_END END_GND SREEL+ SREEL- HALL_VCC TREEL- TREEL+ 9 10 MODE_SW_COM/SW_GND 14 8 XMODE_SW_C CHIME_SCK MIC/REC_SW_GND/ XCCDOWN_SW_GND 7 XMODE_SW_B 13 6 XMODE_SW_A CHIME_SDA 5 DEW- 12 4 DEW+ CHIME_VDD 3 LM_UNLOAD 11 2 LM_UNLOAD 8P FP-467 FLEXIBLE TAPE_TOP 1 LM_LOAD 27P LM_LOAD B XREC_PROOF TO VC-313 BOARD(11/14) CN2502 A 8 27 3 HALL_GND 2 1 LM_LOAD 1 LM_UNLOAD 2 MODE_SW_COM 3 XMODE_SW_A 4 XMODE_SW_B 5 XMODE_SW_C 6 DEW- 7 DEW+ 8 Q901 TAPE END SENSOR Vcc - + G H901 S REEL SENSOR DEW SENSOR Q902 TAPE TOP SENSOR FLEXIBLE D901 (TAPE LED) S903 (CC DOWN) D FP-468 FLEXIBLE Vcc - + G H902 T REEL SENSOR MIC902 S901 (REC PROOF) E 16 Schematic diagram of the VC-313 board are not shown. Pages from 4-37 to 4-64 are not shown. FP-467/468/228 4-35 4-36 DCR-TRV33/TRV33E COVER 4-3. PRINTED WIRING BOARDS Link CD-431 BOARD VA-118 BOARD (SIDE B) LB-085 BOARD CK-129 BOARD FP-626 FLEXIBLE BOARD PD-188 BOARD FP-467/468/228 FLEXIBLE (MD BLOCK) JK-242 BOARD VA-118 BOARD (SIDE A) MA-421 BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION WAVEFORMS FLEXIBLE BOARDS LOCATION DCR-TRV33/TRV33E 4-3. PRINTED WIRING BOARDS COVER THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • : Uses unleaded solder. • : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated) • Through hole is omitted. • Circled numbers refer to waveforms. • There are a few cases that the part printed on diagram isn’t mounted in this model. • C: panel designation • Chip parts. Transistor B Diode 6 5 4 4 5 6 5 C E 4 4 3 5 1 2 3 3 2 1 1 2 3 3 2 1 1 3 3 1 23 2 1 2 1 2 1 3 4 1 2 3 4 4 3 3 4 5 4 3 3 4 5 2 1 4 3 2 1 1 2 2 1 2 2 1 6 54 BOARD INFORMATION board name parts location waveform pattern CSP IC (shown on page) (shown on page) number of layers layers not shown CD-431 4-93 4-89 6 2 to 5 – LB-085 4-93 – 6 2 to 5 – FP-626 FLEXIBLE – – 1 – – VA-118 4-93 4-89 6 2 to 5 – CK-129 4-94 – 6 2 to 5 – PD-188 4-94 4-90 6 2 to 5 – JK-242 4-94 – 6 2 to 5 – MA-421 4-94 – 6 2 to 5 – 2 to 7 IC1601, 2101, 2103, 2201, 2301, 2601, 2704, 2803 VC-313 4-95 4-91,4-92 8 4-65 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS • CD-431 (CCD IMAGER) PRINTED WIRING BOARD : Uses unleaded solder. • Refer to page 4-65 for common note for printed wiring board. CD-431 BOARD(SIDE A) CD-431 BOARD(SIDE B) A A HF5102 L5102 CN5101 22 1 HF5101 FB5101 A C5114 14 A R5101 C5106 C5113 + B 3 4 C5101 B L5101 + 5 C5112 LF5101 C5111 R5102 8 + B C5107 C5105 C5104 8 C5103 C5110 2 3 1 7 LN5101 3 C5102 IC5101 IC5102 C5109 Q5101 C C5115 2 1 7 C5108 14 C5116 C 1 6 LF5102 1 1-687-53716 1 2 3 4-67 3 2 1 11 16 4-68 CD-431 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS LB-085 (EVF, BACK LIGHT) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. LB-085 BOARD (SIDE A) LB-085 BOARD (SIDE B) A A C5602 ID5603 D5602 B A R5606 C5601 D5601 HF5601 K B ID5601 CN5601 CN5602 1 20 R5605 19 R5603 Q5602 ID5602 16 C 1 R5604 LF5601 2 IC5601 R5607 1 C 5 2 3 4 1-687-541- R5602 11 16 LB-085 1 4-69 2 3 3 2 4-70 1 16 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER FP-467/468/228 FLEXIBLE WIRING BOARD (MD BLOCK) FP-626 FLEXIBLE WIRING BOARD • 4-3. PRINTED WIRING BOARDS : Uses unleaded solder. • Refer to page 4-65 for common note for printed wiring board. Q902 TAPE TOP SENSOR FP-468 FLEXIBLE BOARD 27 1 H902 T REEL SENSOR H901 S REEL SENSOR S903 (CC DOWN) 1 Q901 TAPE END SENSOR 8 12 S901 (REC PROOF) 1-686-799- MIC902 D901 (TAPE LED) S902 MODE SWITCH M902 LOADING MOTOR M FP-228 FLEXIBLE BOARD FP-626 BOARD DEW SENSOR 11 1 1-677-049- ID103 A ID10 8 2 ID10 1 FP-467 FLEXIBLE BOARD S101 (PANEL REVERSE) 16 1 1-686-798- 11 LND101 LND102 LND103 LND104 LND105 LND106 1-687-550- 2 11 3 4-71 4-72 FP-467/468/228/FP-626 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS VA-118 (RGB DRIVE, TG, HI CONTROL, Y/P SENSOR AMP, CONNECTOR, DC/DC COVERTER, POWER IN, CHARGE) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. VA-118 BOARD(SIDE A) C4505 C4607 R4567 C4507 D4604 R4614 C4506 C4511 R4615 HF4002 C4109 C4002 Q4608 R4110 Q4610 D4002 D4001 C4108 3 2 1 RB4105 C4501 R4525 R4509 R4504 R4105 R4120 IC4101 A C4557 C4549 C4111 R4107 80 R4108 R4541 + L4519 L4510 1 1 20 21 Q4005 A C4540 Q4004 C4547 + L4518 A RB4106 RB4107 3 3 2 1 C4006 + L4516 A Q4001 R4009 R4562 R4563 Q4524 R4004 C4535 C4558 R4564 C4552 1 2 Q4516 R4561 R4551 + A R4550 Q4505 Q4509 C4531 IC4504 Q4514 C4554 C4562 1 C4521 R4005 CN4004 2 1 100 99 R4010 5 2 3 4 C4541 3 A D R4540 C4536 Q4525 C4530 R4545 + L4508 Q4518 ID4001 2 1 3 Q4508 C4538 Q4002 R4007 Q4504 Q4506 2 Q4003 C4543 C4529 C4526 1 ID4002 C4537 D4507 C4527 ID4003 + L4517 R4106 R4118 R4008 R4537 3 2 1 1 2 3 C4520 R4543 RB4109 R4006 Q4517 C4555 R4104 C4110 C4504 R4510 C4545 D4103 R4512 C4508 Q4513 R4515 C4510 C4513 Q4519 R4511 R4538 Q4510 C4532 40 R4121 R4103 C4528 Q4507 C4522 R4519 R4520 D4504 2 C4101 R4113 2 3 R4514 C4516 C4517 C4551 R4555 Q4520 R4553 1 61 C4117 2 R4542 D4101 41 R4123 R4552 1 Q4101 R4122 RB4104 R4521 R4547 R4539 R4557 C Q4515 3 R4554 C4553 + Q4521 B R4556 R4546 R4518 C4116 C4503 R4516 C4605 R4117 K2 R4124 16 R4517 R4115 60 R4502 17 1 R4116 RB4108 X4101 C4105 R4522 B 64 C4114 R4506 R4505 13 C4115 C4113 RB4101 R4508 R4507 IC4502 12 R4112 R4119 R4524 R4111 R4109 C4107 49 R4503 C4103 33 32 C4112 G 48 R4501 D C4518 C4502 X4102 Q4526 S + A LF4002 C4561 C4005 C4512 D4503 C4509 C4514 C4515 C4519 D4603 R4611 R4523 A R4114 D4502 Q4527 R4549 C4539 A + L4509 1-687-53516 VA-118 1 2 4-73 3 4 5 11 12 6 4-74 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER : Uses unleaded solder. VA-118 BOARD(SIDE B) CN4201 C4217 IC4201 R4214 R4212 C4208 C4305 5 C4211 36 37 R4605 2 R4203 C4203 F4605 Q4601 C4606 L4201 C4205 + B C4204 R4002 CN4602 F4601 C4201 C4523 L4520 R4202 5 F4604 C4603 1 1 R4201 20 R4513 C4559 48 R4205 Q4604 FB4201 Q4602 4 3 C4209 C4202 1 6 3 2 C4533 B CN4003 8 9 B 8 R4526 1 C4206 R4207 D4601 1 48 R4215 R4607 R4608 37 R4210 R4206 7 A D4102 FB4202 + HF4001 3 36 C4218 C4207 C4302 R4211 12 R4609 1 F4602 D4602 F4603 4 25 R4208 RB4301 C4301 13 24 Q4603 IC4202 10 1 R4601 R4213 C4306 11 11 L4202 12 R4606 C4216 C4308 10 13 R4604 RB4202 RB4201 LF4602 25 C4210 IC4301 C4307 24 C4212 C4309 C4311 C4602 3 D4201 C4310 C4214 20 C4215 1 C4312 LF4001 R4305 C4601 1 10 R4302 R4301 R4209 C4304 R4304 R4303 C4003 A + CN4001 L4301 C4314 C4213 A C4313 1 A C4303 + 20 C4604 C4550 L4601 B C4001 + + R4204 L4515 CN4002 • MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS C4548 L4501 C L4505 + A L4514 L4504 C4546 1 CN4005 16 A + L4513 + L4512 C4544 A L4506 L4502 3 + A C4542 1 1 36 L4511 C4560 L4507 CN4603 D L4503 L4521 1-687-535- 6 5 4 4-75 3 2 1 4-76 11 12 16 VA-118 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS CK-129 (FUNCTION SWITCH) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. CK-129 BOARD(SIDE B) CK-129 BOARD(SIDE A) R5223 CN5207 A 6 B A 1 B D5209 1 CN5208 C5202 D5208 C5201 D5207 16 C C S5203 RESET D CN5205 D5205 D5203 R5201 2 1 D CN5210 4 BT5201 (LITHIUM BATTERY) LN5201 E LN5202 1 1 S5207 (PANEL XCLOSE/OPEN) 6 E CN5209 1-687-538- 1 16 2 3 4 4 3 2 CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. CK-129 4-77 4-78 1 11 16 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS PD-188 (DRIVER, TG, BACKLIGHT DRIVE) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. PD-188 BOARD D6101 FB6002 R6005 D6102 C6014 C6009 C6010 3 36 37 C6002 25 C6001 C6004 + L6001 RB6001 C6016 1 5 48 1 RB6002 R6106 C6103 IC6001 6 R6001 1 Q6102 A 2 24 R6002 A C6017 C6018 13 12 4 5 C6019 C6005 L6101 CN6201 R6007 R6004 6 R6013 IC6002 5 R6104 9 12 13 L6002 25 24 1 Q6101 3 R6108 C6102 1 IC6102 4 2 8 R6105 2 1 4 3 5 C6105 C6104 R6107 R6021 3 C6024 R6022 1 C6022 Q6002 C6023 1 Q6001 D6003 Q6005 2 C6101 D6001 R6103 1 2 37 36 48 R6019 R6020 R6015 10 C6013 R6017 3 1 R6008 3 C6015 R6016 7 R6018 1 C6021 2 R6014 CN6202 R6011 C6008 FB6001 Q6004 Q6003 D6002 C T6101 R6003 C6007 C6020 20 8 C6012 R6006 C6011 R6012 R6010 R6009 B 1 3 R6110 R6023 C6006 R6101 R6102 + D6201 IC6101 Q6104 A C6003 LN6101 D6103 R6109 1 10 4 1 24 1 CN6001 6 CN6203 CN6101 1-687-542- D D6104 11 16 1 2 4-79 3 4 4-80 PD-188 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS JK-242 (A.V/DV IN/OUT) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. JK-242 BOARD(SIDE A) JK-242 BOARD(SIDE B) D5302 LN5302 7 A LF5301 CN5301 5 A (USB) R5304 1 R5305 D5304 6 B D5303 B 6 4 2 CN5302 3 DV Interface 1 5 VD5302 C C FB5301 J5301 VD5301 AUDIO/VIDEO 1 D D5305 R5306 16 FB5302 CN5303 1-687-539- LN5301 16 JK-242 D VD5303 1 2 4-81 3 3 2 1 4-82 11 16 DCR-TRV33/TRV33E 4-2. SCHEMATIC DIAGRAMS COVER MOUNTED PARTS LOCATION 4-3. PRINTED WIRING BOARDS MA-421 (MIC AMP, Y/P SENSOR, V/A IN/OUT) PRINTED WIRING BOARD • • Refer to page 4-65 for common note for printed wiring board. : Uses unleaded solder. MA-421 BOARD(SIDE A) MA-421 BOARD(SIDE B) J5402 (LANC) J5401 MIC (PLUG IN POWER) J5405 (headphones) K 4 4 2 VD5407 VD5401 VD5403 K C5522 R5520 D5401 + 36 37 25 24 D5404 R5525 IC5501 C5533 SE5401 (YAW SENSOR) R5524 C5531 13 12 1 R5407 + R5522 FB5401 48 A R5503 D5409 C5404 C5539 1 IC5401 A A A C5513 C5504 FB5402 R5402 R5505 C5505 R5504 C5514 C5511 C5528 R5530 J5404 S VIDEO R5506 R5533 R5514 + 4 3 C5527 C5506 FB5411 R5515 R5401 VD5409 C5503 C5502 C5523 R5507 R5512 C5518 D5405 B FB5406 C5520 R5508 R5408 FB5405 VD5402 R5511 2 L5501 C5519 R5516R5534R5519 R5502 R5527 C5536 R5529 R5528 C5535 C5529 C5512 C5530 C5538 R5501 R5517 R5510 C R5405 R5521 R5532 C5516 C5501 C5521 C5510 R5509 FB5409 VD5408 C5532 R5513 C5515 D5410 C5524 C R5403 LN5401 R5531 8 3 C5517 R5518 D5408 11 5 3 1 2 4 7 D5403 CN5401 3 6 B 4 VD5410 2 FB5407 1 FB5410 LN5402 A 1 1 SE5402 (PITCH SENSOR) FB5408 A FB5403 A R5406 FB5404 D5407 2 36 C5537 R5526 37 CN5402 11 1 1-687-54016 1 2 3 4 5 5 4 3 2 1 16 Printed wiring board of the VC-313 board are not shown. Pages from 4-85 to 4-88 are not shown. 4-83 4-84 MA-421 DCR-TRV33/TRV33E CD-431 BOARD COVER VA-118 BOARD SIDE A VA-118 BOARD SIDE B PD-188 BOARD 4-4. WAVEFORMS CD-431 BOARD CAMERA REC 1 IC5101 1,4 PD-188 BOARD VA-118 BOARD 1 IC4101 wl 7 IC6002 1 REC/PB REC/PB (EVF) 7.6 Vp-p 8.3 Vp-p 3.3Vp-p 43.3 µsec 400mVp-p 100 nsec 2 IC5101 2,3 1 IC6001 w; qd IC4502 ys 7 IC4201 rj REC/PB REC/PB 2.0 usec 7.8Vp-p H H 8 IC6002 rk 2 IC6001 ws 8 IC4201 rk 2 IC4101 ta 2.8Vp-p H REC/PB (EVF) REC/PB 7.6 Vp-p 7.8Vp-p H 30.5 usec 3 IC5101 8,IC5102 qa 9 IC6002 wh 3 IC6001 wf REC/PB REC/PB (EVF) 700mVp-p V H 9 IC4202 1 3 IC4201 w; 7.8 Vp-p 43.3 µsec 2.8Vp-p 430 mVp-p 3.0 Vp-p 43.3 µsec 2.8 Vp-p 8.2Vp-p 2.8Vp-p H 85 nsec H H 4 IC5101 q; 4 IC6001 rk q; IC4202 rk 4 IC4201 ws REC/PB REC/PB (EVF) 5.0 Vp-p 480 mVp-p 30.3 nsec 7.8 Vp-p H 5 IC5101 qa,qs 2.8Vp-p H V 5 IC6001 rj qa IC4202 wh 5 IC4201 wf REC/PB (EVF) REC/PB (EVF) 450 mVp-p 5.0 Vp-p 2.1 Vp-p 30.3 nsec 7.8 Vp-p 6 IC5102 qd,qf H 92 nsec 6 IC4201 rh qs IC4501 ya H 6 IC6001 rh REC/PB REC/PB (EVF) 8.3 Vp-p 30.3 nsec CD-431/VA-118/PD-188 490 mVp-p 2.1 usec 4.1Vp-p 430 mVp-p H H 4-89 4-90 Waveforms of the VC-313 board are not shown. Pages 4-91 and 4-92 are not shown. DCR-TRV33/TRV33E 4-3. PRINTED WIRING BOARDS COVER no mark : side A * mark : side B 4-5. MOUNTED PARTS LOCATION CD-431 BOARD * * * * * * * * * * * * * * * * C5101 C5102 C5103 C5104 C5105 C5106 C5107 C5108 C5109 C5110 C5111 C5112 C5113 C5114 C5115 C5116 B-1 C-2 C-2 B-1 B-2 B-2 B-2 C-1 C-2 B-3 B-3 B-3 B-3 B-1 C-2 C-1 * CN5101 B-2 * FB5101 B-2 IC5101 C-2 * IC5102 C-2 * L5101 L5102 B-3 A-3 * Q5101 C-3 * R5101 * R5102 B-1 B-2 LB-085 BOARD VA-118 BOARD * C5601 * C5602 * C4001 C4002 * C4003 C4005 C4006 C4101 C4103 C4105 C4107 C4108 C4109 C4110 C4111 C4112 C4113 C4114 C4115 C4116 C4117 * C4201 * C4202 * C4203 * C4204 * C4205 * C4206 * C4207 * C4208 * C4209 * C4210 * C4211 * C4212 * C4213 * C4214 * C4215 * C4216 * C4217 * C4218 * C4301 * C4302 * C4303 * C4304 * C4305 * C4306 * C4307 * C4308 * C4309 * C4310 * C4311 * C4312 * C4313 * C4314 C4501 C4502 C4503 C4504 C4505 C4506 C4507 C4508 C4509 C4510 C4511 C4512 C4513 C4514 C4515 C4516 C4517 C4518 C4519 C4520 C4521 C4522 * C4523 C4526 C4527 C4528 C4529 C4530 C4531 C4532 * C4533 C4535 C4536 C4537 B-1 B-1 CN5601 B-2 CN5602 A-1 * D5601 * D5602 B-3 B-2 * IC5601 C-1 * Q5602 C-1 R5602 R5603 R5604 R5605 R5606 R5607 C-3 C-3 C-1 B-1 B-3 C-2 * * * * * * C-5 A-4 A-3 C-6 C-5 B-4 B-4 B-4 B-4 A-4 A-5 B-4 B-4 B-4 A-5 A-5 A-4 B-5 B-5 C-3 C-4 C-4 C-4 C-4 B-3 B-3 B-3 B-4 B-3 B-4 A-3 A-4 A-4 A-4 B-4 B-3 B-3 B-6 B-6 A-6 A-6 B-6 B-6 B-6 B-6 B-5 A-5 B-6 A-6 A-6 A-6 A-2 A-2 B-2 B-2 A-2 A-2 A-2 B-2 A-2 B-2 A-2 A-2 B-2 A-2 A-1 B-2 B-2 A-1 A-1 C-2 D-1 C-1 C-2 C-2 C-2 C-1 C-2 D-2 D-1 C-1 C-2 D-2 D-2 C-2 4-93 * * * * * * * * * * * * C4538 C4539 C4540 C4541 C4542 C4543 C4544 C4545 C4546 C4547 C4548 C4549 C4550 C4551 C4552 C4553 C4554 C4555 C4557 C4558 C4559 C4560 C4561 C4562 C4601 C4602 C4603 C4604 C4605 C4606 C4607 D-1 D-1 C-2 D-3 D-3 C-3 D-3 B-3 C-3 C-3 C-3 C-3 C-3 B-1 D-3 C-1 D-3 C-2 C-3 D-3 B-2 D-3 A-1 D-3 B-2 A-2 B-2 C-1 C-1 C-1 A-3 L4511 L4512 L4513 L4514 L4515 L4516 L4517 L4518 L4519 * L4520 * L4521 * L4601 * * * * * A-4 A-4 B-6 B-5 C-4 B-3 A-2 A-1 C-2 C-2 B-1 B-1 A-3 A-3 F4601 F4602 F4603 F4604 F4605 B-1 B-1 C-1 B-1 B-1 * * * * * * FB4201 B-3 * FB4202 B-4 IC4101 B-5 * IC4201 B-4 * IC4202 B-3 * IC4301 B-6 IC4502 B-2 IC4504 D-3 * * * * * * * * * * L4201 L4202 L4301 L4501 L4502 L4503 L4504 L4505 L4506 L4507 L4508 L4509 L4510 C-3 B-3 A-5 C-2 D-2 D-2 C-1 C-2 D-2 D-2 D-1 D-1 C-2 * * * * * * * * * * * * * * LF4601 A-2 Q4001 Q4002 Q4003 Q4004 Q4005 Q4101 Q4504 Q4505 Q4506 Q4507 Q4508 Q4509 Q4510 Q4513 Q4514 Q4515 Q4516 Q4517 Q4518 Q4519 Q4520 Q4521 Q4524 Q4525 Q4526 Q4527 Q4601 Q4602 Q4603 Q4604 Q4608 Q4610 C-6 C-6 C-5 C-5 C-5 B-6 C-1 D-1 C-1 C-1 C-2 D-2 C-2 C-2 D-2 C-1 D-3 C-2 D-2 C-2 C-1 C-1 D-3 D-3 A-1 A-1 B-2 B-1 B-2 B-2 A-3 A-3 * R4002 R4004 R4005 R4006 R4007 R4008 R4009 R4010 R4103 R4104 R4105 R4106 R4107 R4108 R4109 R4110 R4111 R4112 R4113 R4114 R4115 R4116 R4117 R4118 R4119 R4120 R4121 R4122 R4123 R4124 * R4201 * R4202 * R4203 * R4204 * R4205 * R4206 * R4207 C-5 D-6 D-6 C-6 C-6 C-6 C-6 D-6 B-4 B-4 B-4 B-4 C-4 C-4 A-4 A-4 A-5 A-5 C-4 A-5 A-5 A-4 B-5 B-5 B-6 B-6 B-5 B-4 B-4 B-4 C-4 C-4 C-4 C-5 C-4 B-3 B-3 * CN4001 A-4 * CN4002 C-6 * CN4003 C-5 CN4004 D-5 * CN4005 D-4 * CN4201 A-1 * CN4602 A-1 * CN4603 D-1 D4001 D4002 D4101 D4102 D4103 * D4201 D4502 D4503 D4504 D4507 * D4601 * D4602 D4603 D4604 D-3 D-3 C-3 C-3 C-3 C-3 C-3 C-3 C-3 C-2 D-3 C-1 * * * * * * * * * * * * * * * * R4208 R4209 R4210 R4211 R4212 R4213 R4214 R4215 R4301 R4302 R4303 R4304 R4305 R4501 R4502 R4503 R4504 R4505 R4506 R4507 R4508 R4509 R4510 R4511 R4512 R4513 R4514 R4515 R4516 R4517 R4518 R4519 R4520 R4521 R4522 R4523 R4524 R4525 R4526 R4537 R4538 R4539 R4540 R4541 R4542 R4543 R4545 R4546 R4547 R4549 R4550 R4551 R4552 R4553 R4554 R4555 R4556 R4557 R4561 R4562 R4563 R4564 R4565 R4566 R4567 R4601 R4602 R4603 R4604 R4605 R4606 R4607 R4608 R4609 R4611 R4613 R4614 R4615 B-3 B-3 B-3 B-3 B-3 B-3 B-3 B-3 A-6 A-6 A-6 A-6 A-6 A-2 B-2 A-3 B-3 B-2 B-3 B-2 B-3 B-2 B-2 B-2 B-2 B-2 B-2 B-2 B-2 B-1 B-2 B-2 B-2 B-1 B-1 A-2 B-1 B-1 B-2 C-2 B-2 B-1 D-2 C-2 C-2 C-1 D-3 C-1 B-1 D-3 D-3 D-3 C-2 C-1 C-1 C-1 C-1 B-1 D-3 D-3 D-3 D-3 D-4 D-1 A-2 B-1 A-2 B-2 B-2 B-2 B-2 B-2 B-2 B-2 A-3 A-2 A-3 A-3 RB4101 RB4104 RB4105 RB4106 RB4107 RB4108 B-4 B-4 B-4 C-4 C-5 A-4 RB4109 B-6 * RB4201 B-4 * RB4202 B-3 * RB4301 B-6 X4101 X4102 A-5 B-6 CD-431/LB-085/VA-118 DCR-TRV33/TRV33E 4-3. PRINTED WIRING BOARDS COVER no mark : side A * mark : side B CK-129 BOARD PD-188 BOARD * BT5201 C-1 C6001 C6002 C6003 C6004 C6005 C6006 C6007 C6008 C6009 C6010 C6011 C6012 C6013 C6014 C6015 C6016 C6017 C6018 C6019 C6020 C6021 C6022 C6023 C6024 C6101 C6102 C6103 C6104 C6105 A-2 A-1 A-2 B-2 B-2 A-2 B-3 B-2 A-3 A-3 B-2 B-2 B-3 A-2 C-3 A-3 A-3 A-3 B-3 B-2 C-2 C-1 C-3 C-2 B-4 C-4 A-4 C-4 C-4 CN6001 CN6101 CN6201 CN6202 CN6203 D-2 D-4 B-1 C-1 D-3 D6001 D6002 D6003 D6101 D6102 D6103 D6104 B-3 C-2 C-3 A-1 A-1 C-4 D-3 FB6001 FB6002 B-2 A-2 IC6001 IC6002 IC6101 IC6102 A-2 C-2 C-3 C-4 L6001 L6002 L6101 B-2 C-3 B-4 Q6001 Q6002 Q6003 Q6004 Q6005 Q6101 Q6102 Q6103 Q6104 C-2 C-2 B-2 C-2 C-1 C-3 A-4 A-4 C-4 R6001 R6002 R6003 R6004 R6005 R6006 R6007 R6008 R6009 R6010 R6011 R6012 R6013 R6014 R6015 R6016 R6017 R6018 R6019 A-2 A-2 B-3 B-2 A-2 B-2 B-2 B-2 B-2 B-2 B-2 B-2 B-3 C-2 C-2 C-2 C-2 B-2 C-1 * C5201 * C5202 C-1 B-1 * * * * * CN5205 CN5207 CN5208 CN5209 CN5210 C-3 A-1 C-4 E-2 D-4 * * * * * D5203 D5205 D5207 D5208 D5209 D-4 C-3 C-1 B-1 B-3 * R5201 * R5223 D-4 A-1 S5203 S5207 D-4 E-2 JK-242 BOARD R6020 R6021 R6022 R6023 R6101 R6102 R6103 R6104 R6105 R6106 R6107 R6108 R6109 R6110 C-1 C-2 C-2 A-1 A-1 A-1 C-3 C-4 C-4 A-4 C-4 C-4 C-4 C-4 RB6001 RB6002 A-3 A-3 T6101 B-4 CN5301 A-3 CN5302 B-3 CN5303 D-1 * * * * D5302 D5303 D5304 D5305 A-2 A-2 B-2 D-1 * FB5301 C-1 * FB5302 D-1 J5301 C-2 * LF5301 A-2 * R5304 * R5305 * R5306 A-2 A-2 C-1 * VD5301 C-1 * VD5302 C-1 * VD5303 D-1 MA-421 BOARD C5402 * C5404 * C5501 C5502 C5503 * C5504 * C5505 * C5506 * C5510 * C5511 * C5512 C5513 C5514 * C5515 * C5516 C5517 C5518 * C5519 C5520 * C5521 C5522 C5523 * C5524 C5527 C5528 * C5529 * C5530 * C5531 * C5532 * C5533 * C5535 * C5536 * C5537 * C5538 * C5539 B-4 C-3 C-4 B-4 B-4 C-4 B-4 B-4 C-4 B-5 C-4 B-4 B-4 C-4 C-4 B-4 B-4 C-4 B-4 C-4 B-4 B-4 C-4 B-4 B-4 C-4 C-4 C-3 C-3 B-3 C-3 C-3 C-3 C-3 C-3 * CN5401 A-2 * CN5402 C-2 D5401 * D5403 * D5404 D5405 D5407 D5408 D5409 B-4 B-2 B-3 C-3 A-3 B-1 C-4 FB5401 FB5402 FB5403 FB5404 FB5405 FB5406 FB5407 FB5408 FB5409 FB5410 * FB5411 C-2 C-2 A-2 A-2 B-4 B-5 A-2 B-2 C-1 A-5 B-5 J5401 J5402 J5404 J5405 A-4 A-2 B-1 A-5 * L5501 C-3 R5401 R5402 R5403 R5405 R5406 R5407 R5408 R5501 R5502 R5503 R5504 R5505 R5506 R5507 R5508 R5509 R5510 R5511 R5512 R5513 R5514 R5515 R5516 R5517 R5518 R5519 R5520 R5521 R5522 R5524 R5525 R5526 R5527 R5528 R5529 R5530 R5531 R5532 R5533 R5534 B-4 B-4 B-1 C-3 A-2 C-2 B-2 C-3 C-3 C-4 B-4 C-4 B-4 B-4 B-4 C-4 C-4 B-4 B-4 C-4 B-4 B-4 C-4 C-4 B-4 C-4 C-4 C-4 C-3 C-3 B-3 C-3 C-3 C-3 C-3 C-4 B-4 C-4 B-4 C-4 * * * * * * * * * * * * * * * * * * * * * * * * * * CK-129/PD-188/JK-242/MA-421 * * * * * * * * * * SE5401 C-2 SE5402 A-2 * * * * * * VD5401 VD5402 VD5403 VD5407 VD5408 VD5409 VD5410 B-5 B-4 B-1 B-2 C-2 B-5 A-5 IC5401 C-3 * IC5501 C-4 Mounted parts location of the VC-313 board is not shown. Pages from 4-95 to 4-96 are not shown. 4-94E DCR-TRV33/TRV33E COVER NOTE 5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS Link A OVERALL SECTION F PANEL SECTION D B MAIN CHASSIS SECTION E LENS SECTION F CABINET L SECTION BT PANEL/EVF SECTION CABINET R SECTION OVERALL (MECHANISM DECK-Z100) LS CHASSIS BLOCK ASSEMBLY MECHANICAL CHASSIS BLOCK ASSEMBLY Link C G LCD SECTION ELECTRICAL PARTS LIST ACCESSORIES CD-431 BOARD C JK-242 BOARD D PD-188 BOARD G CK-129 BOARD F LB-085 BOARD E VA-118 BOARD B FP-626 FLEXIBLE BOARD G MA-421 BOARD A DCR-TRV33/TRV33E COVER 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied. • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • CAPACITORS: uF: µF • COILS uH: µH • RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable • SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD... • Abbreviation CND : Canadian model AUS : Australian model EE : East European model NE : North European model JE : Tourist model CH : Chinese model KR : Korea model HK : Hong Kong model 5-1 When indicating parts by reference number, please include the board name. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION ns : not supplied BT panel/EVF section (See page 5-8) 2 4 6 2 2 3 2 5 10 7 8 ns 2 A 9 Main chaises section (See page 5-5) 8 2 F panel section (See page 5-4) 2 2 Cabinet R section (See page 5-9) 1 2 A Ref. No. 1 2 3 4 5 2 Part No. Description Ref. No. Part No. Description X-3953-088-1 3-989-735-81 3-080-571-01 3-056-030-81 3-080-570-01 CAP ASSY, LENS SCREW (M1.7), LOCK ACE, P2 COVER, SHOE SCREW (M1.7), LOCK ACE, P2 LID, CPC 6 * 7 8 9 10 X-3953-229-1 4-942-636-01 3-989-735-51 3-080-421-11 3-713-791-51 COVER (40E) ASSY, CABINET (R) EMBLEM (NO.3.5), SONY SCREW (M1.7), LOCK ACE, P2 BUTTON, CF SCREW (M1.7X3.5), TAPPING, P2 5-3 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-2. F PANEL SECTION ns : not supplied 60 58 56 59 57 57 MIC901 ns 57 54 53 55 51 Ref. No. 52 Part No. Description 51 52 52 53 54 3-080-516-01 3-081-242-01 3-081-242-11 3-080-573-01 X-3953-214-1 COVER, S TERMINAL PLATE (G), NAME (TRV33) PLATE (G), NAME (TRV33E) COVER (F), JACK PANEL (400) ASSY, F 55 A-7013-530-A MA-421 (MSARI) BOARD, COMPLETE Ref. No. 56 57 58 59 60 Part No. Description 3-080-517-01 3-713-791-11 3-080-519-01 3-080-514-01 CAUTION RETAINER, MICROPHONE SCREW (M1.7X5), TAPPING, P2 CUSHION, MA COVER COVER, MA SHEET, HP MIC901 1-542-513-11 MICROPHONE CAUTION : For the parts of 60 : SHEET, HP (3-083-974-01) cut SHEET (MD), CN (3-075-957-02) into the desired length and use it. 5-4 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-3. MAIN CHASSIS SECTION ns : not supplied 110 Cabinet (L) section (See page 5-7) E F G 111 103 D C B A 101 ns 105 104 E 102 C B A 105 D 107 ns 106 Mechanism deck (See page 5-11 ~ 5-13) F 105 G 108 ns 105 105 105 Lens section (See page 5-6) Ref. No. Part No. Description 101 102 103 104 105 3-080-569-01 3-989-735-81 X-3953-112-1 3-975-921-01 3-989-735-01 SCREW SCREW (M1.7), LOCK ACE, P2 FRAME ASSY, MD SHEET, VIBRATION PROOF SCREW (M1.7), LOCK ACE, P2 106 3-062-214-01 SCREW (M1.4X1.5) 109 110 Ref. No. 107 Description 108 109 110 A-7016-142-A VC-313 (NT) BOARD, COMPLET (SERVICE) (TRV33) A-7016-330-A VC-313 (PAL) BOARD, COMPLETE (SERVICE) (TRV33E) A-7013-555-A VA-118 (MDG) BOARD, COMPLETE 1-687-546-11 FP-621 FLEXIBLE BOARD 3-941-343-21 TAPE (A) 111 3-081-787-01 SHEET, RF 107 5-5 Part No. 105 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-4. LENS SECTION 157 156 IC5101 152 155 151 153 154 158 159 160 161 163 162 Be sure to read “Precautions upon replacing CCD imager” on page 4-9 when changing the CCD imager. Ref. No. Part No. Description Ref. No. Part No. Description 151 152 153 154 155 3-713-791-51 X-3953-111-1 8-848-769-01 1-758-569-11 3-053-973-01 SCREW (M1.7X3.5), TAPPING, P2 FRAME (40) ASSY, LENS DEVICE, LENS LSV-751A FILTER BLOCK, OPTICAL RUBBER (W), SEAL 158 159 160 * 161 162 1-687-548-11 3-081-700-01 3-080-566-01 3-063-899-01 3-080-567-01 FP-624 FLEXIBLE BOARD SHEET (CD), RADIATION HEAT SINK, CD SHEET (S) SHEET, CD RADIATION 156 157 A-7013-527-A CD-431 BOARD, COMPLETE 3-713-791-11 SCREW (M1.7X5), TAPPING, P2 163 IC5101 5-6 3-080-568-01 SHEET (M),FLEXIBLE PROTECTION A-7031-359-A CCD BLOCK ASSY (CCD IMAGER) DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-5. CABINET L SECTION ns : not supplied 212 211 207 213 219 202 220 218 216 210 217 209 207 215 208 ns 214 207 203 202 203 221 222 206 203 A ns 203 ns A 205 202 223 204 203 201 Ref. No. Part No. Description 201 202 203 204 205 X-3953-219-2 3-989-735-01 3-713-791-51 3-080-468-01 3-080-467-01 CABINET (G) ASSY (40E) SCREW (M1.7), LOCK ACE, P2 SCREW (M1.7X3.5), TAPPING, P2 SHEET METAL (FRONT), GRIP BELT BELT, GRIP 206 207 208 209 210 3-073-686-11 3-989-735-81 3-080-473-01 1-793-996-11 1-687-545-11 SCREW (M2X2.5) SCREW (M1.7), LOCK ACE, P2 FRAME, SHOE CONNECTOR, EXTERNAL FP-620 FLEXIBLE BOARD 211 212 3-080-572-01 COVER (L), JACK 3-080-576-11 SHEET (L), JACK 202 Ref. No. 5-7 Part No. Description 213 214 215 216 217 X-3953-218-1 1-815-795-11 1-687-551-11 1-687-549-11 A-7013-551-A CABINET (L) ASSY (40E) CONNECTOR, MEMORY STCK FP-630 FLEXIBLE BOARD FP-625 FLEXIBLE BOARD JK-242 BOARD, COMPLETE 218 219 220 221 222 1-477-740-21 3-082-335-01 3-076-631-01 3-081-434-01 X-3953-096-1 SWITCH BLOCK, CONTROL (FK-CX4000) DC-IN JACK COVER (SERVICE) RETAINER, FK FLEXIBLE SHEET Z FRAME ASSY, CS 223 3-080-471-01 KNOB, EJECT DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-6. BT PANEL/EVF SECTION ns : not supplied 265 260 264 262 260 258 257 255 261 259 256 263 272 260 LCD902 252 251 267 272 268 ns 266 267 253 267 254 260 BT901 271 270 269 260 Ref. No. Part No. Description Part No. Description 251 252 253 254 255 3-080-420-11 X-3953-118-1 1-687-544-21 3-081-694-02 A-7013-525-A CABINET, VF TILT SLIDE ASSY, VF FP-619 FLEXIBLE BOARD RETAINER, EVF FLEXIBLE LB-085 (C) BOARD, COMPLETE Ref. No. 263 264 265 266 267 3-080-617-01 3-713-791-51 X-3953-115-1 X-3953-116-1 3-989-735-81 CABINET (LOWER), VF SLIDE SCREW (M1.7X3.5), TAPPING, P2 EYE CUP (40) ASSY HINGE ASSY, VF SCREW (M1.7), LOCK ACE, P2 256 257 258 259 260 3-080-615-01 3-080-618-01 3-080-613-01 3-080-614-01 3-989-735-01 CUSHION (LB) (40) GUIDE (40), LAMP ILLUMINATOR (40) SHEET (40), PRISM SCREW (M1.7), LOCK ACE, P2 268 269 270 271 272 X-3953-113-1 X-3953-349-2 3-080-543-01 X-3953-114-1 3-083-290-01 PANEL ASSY, BATTERY SHEET METAL (UPPER) ASSY STRAP SHEET, FOOT SHEET METAL (LOWER) ASSY,STRAP SHEET (VF) 261 262 X-3953-119-1 CABINET ASSY, LCD X-3953-117-1 CABINET (UPPER) ASSY, VF SLIDE BT901 1-694-796-11 TERMINAL BOARD, BATTERY LCD902 8-753-028-47 LCX032AN-5 5-8 Ver 1.1 2003. 06 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-7. CABINET R SECTION ns : not supplied 307 LCD section (See page 5-10) 308 309 305 ns 306 SP901 302 304 301 301 310 303 : BT5201 (Lithium battery) CK-129 board on the mount position. (See page 4-77) CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Ref. No. Part No. Description 301 302 303 304 305 3-713-791-51 X-3953-097-1 1-687-543-11 A-7013-534-A X-3953-095-1 SCREW (M1.7X3.5), TAPPING, P2 RETAINER ASSY, SPEAKER FP-618 FLEXIBLE BOARD CK-129 BOARD, COMPLETE CABINET (R) ASSY 306 3-959-978-02 CUSHION, PANEL Ref. No. 307 308 309 310 SP901 5-9 Part No. Description 1-477-741-11 3-989-735-01 3-713-791-11 3-941-343-21 1-825-260-21 SWITCH BLOCK, CONTROL (CF-CX4000) SCREW (M1.7), LOCK ACE, P2 SCREW (M1.7X5), TAPPING, P2 TAPE (A) LOUD SPEAKER (1.6CM) DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-8. LCD SECTION ns : not supplied 357 S101 358 B 364 353 356 363 LCD901 A B 365 355 ND901 C 353 361 354 353 360 352 A 359 351 C 362 Ref. No. Part No. Description 351 352 353 354 355 3-082-269-01 X-3953-104-1 3-989-735-81 1-962-081-11 3-080-387-11 EMBLEM (M), P CABINET (C) ASSY (M), P SCREW (M1.7), LOCK ACE, P2 HARNESS (PV-140) COVER (C) (40), HINGE 356 357 358 359 X-3953-107-2 1-687-550-11 3-080-496-01 3-989-735-01 HINGE (40) ASSY FP-626 FLEXIBLE BOARD COVER (M) (40), HINGE SCREW (M1.7), LOCK ACE, P2 Ref. No. 360 361 362 363 364 365 LCD901 0 ND901 S101 5-10 Part No. Description A-7013-528-A 3-080-498-01 3-080-499-01 3-080-497-01 X-3953-106-1 PD-188 BOARD, COMPLETE FRAME (40), PANEL SHEET (40), INSULATING, LCD CUSHION (T), LCD CABINET (M) (40) ASSY, P 3-713-791-11 8-753-052-10 1-477-755-11 1-771-039-31 SCREW (M1.7X5), TAPPING, P2 ACX307AKM-1 BLOCK LIGHT GUIDE PLATE (2.5) SWITCH, PUSH (PANEL REVERSE) Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Ver 1.1 2003. 06 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-9. OVERALL (MECHANISM DECK-Z100) 703 704 707 711 705 706 710 707 716 712 709 708 702 LS chassis block assembly (See page 5-12) M901 Mechancal chassis block assembly (See page 5-13) 701 715 713 714 Ref. No. Part No. Description 701 702 703 704 705 X-3952-938-3 3-075-097-11 3-079-206-02 X-3952-939-3 3-079-367-02 GEAR ASSY, GOOSENECK SCREW (M1.4X1.4), SPECIAL HEAD SPRING (POP UP S), TXTENSION COMPARTMENT ASSY, CASSETTE DAMPER, CASSETTE COMPARTMENT 706 707 708 3-079-215-02 SPRING (POP UP T), EXTENSION 3-703-816-15 SCREW (M1.4), SPECIAL HEAD 3-080-545-01 COVER, SENSOR S Ref. No. 5-11 Part No. Description 709 710 711 712 713 3-079-364-01 X-3952-937-1 3-079-366-01 X-3953-257-1 A-7095-393-A RETAINER, LS GUIDE TABLE ASSY, T REEL RELEASE, REEL LOCK PLATE ASSY,RETAINER MD (Z100) SUB ASSY 714 715 716 M901 3-079-741-02 3-748-682-01 3-081-221-01 A-7048-981-A SCREW,DRUM FIXING WASHER, T LABEL (Z), LS DRUM (DEH-30A-R) (SERVICE) DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-10. LS CHASSIS BLOCK ASSEMBLY ns : not supplied 765 762 761 766 MIC902 763 Q901 ns 774 760 FP-468 (Note) D901 769 773 759 H901 Q902 758 768 H902 S903 771 764 757 770 767 772 756 755 754 753 ns 752 751 Ref. No. Part No. Description 751 752 753 754 755 A-7095-402-B 3-079-241-01 3-075-097-11 3-079-246-01 3-079-248-01 BRAKE (T) BLOCK ASSY PLATE, LS CAM SCREW (M1.4X1.4), SPECIAL HEAD SPRING(RELEASE RACK),EXTENSION POSITIONING(S), CASSETTE 756 757 758 759 760 3-079-244-01 X-3952-932-2 3-079-245-01 3-079-247-01 3-059-090-11 761 762 763 764 765 3-079-242-01 A-7095-401-A 3-079-267-01 3-079-268-01 X-3952-936-2 766 3-703-816-15 SCREW (M1.4), SPECIAL HEAD Note: FP-468 is included in the LS block assy and is attached to chassis by hot-press. because installation of FP-468 requires a very high accuracy, FP-468 is hot supplied as an independent service parts. Ref. No. Part No. Description 767 768 769 770 771 3-079-243-02 X-3952-934-1 3-052-062-02 3-079-219-02 3-081-591-01 SPRING (PINCH RETURN), TORSION ARM ASSY, PINCH NUT, TG7 TG7 SPRING, COMPRESSION (TG7) SPRING (ULE), EXTENSION BRAKE ASSY, ULE RACK (S), RELEASE BRAKE (S) SCREW (M1.4X2.5), SPECIAL HEAD 772 773 774 D901 H901 X-3952-935-3 3-079-237-01 A-7095-403-B 6-500-652-01 8-719-067-74 ARM ASSY, TG7 ADJUSTOR, BAND TG2 ARM BLOCK ASSY DIODE GL453SE0000F (TAPE LED) ELEMENT, HOLE HW-105A-CDE-T (S REEL) SPRING, TENSION (TENSION REGULATOR) LS BLOCK ASSY HOLDER (S), SENSOR HOLDER (T), SENSOR TABLE ASSY, S REEL H902 MIC902 S903 Q901 Q902 8-719-067-74 1-817-175-12 1-529-566-51 6-550-402-01 6-550-402-01 ELEMENT, HOLE HW-105A-CDE-T (T REEL) PIN, CONNECTOR (WITH DETECTION SWITCH) SWITCH, PUSH (1 KEY) (C.C. DOWN) TRANSISTOR PT4850FE000F (TAPE END) TRANSISTOR PT4850FE000F (TAPE TOP) 5-12 DCR-TRV33/TRV33E 5. REPAIR PARTS LIST COVER 5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY ns : not supplied 827 809 813 806 M902 816 S902 822 820 814 811 812 815 829 810 816 821 819 830 825 826 817 807 823 818 808 824 828 805 ns 803 802 804 ns 801 Ref. No. Part No. Description 801 802 803 804 805 3-079-314-01 3-079-327-01 3-079-323-02 3-079-324-02 X-3952-928-1 SPRING (EJ), EXTENSION ARM, EJ GEAR, CONVERSION ARM, GL DRIVING GL (S) ASSY 806 807 808 809 810 3-079-315-01 X-3952-925-2 3-079-320-01 3-079-316-01 3-079-319-01 811 812 813 814 815 X-3952-941-3 3-079-321-02 X-3952-940-2 3-079-312-01 3-079-307-01 816 3-703-816-15 SCREW (M1.4), SPECIAL HEAD Ref. No. Part No. Description 817 818 819 820 821 3-079-308-01 3-079-309-01 X-3952-942-3 3-079-325-01 3-079-295-02 SHAFT, WORM GEAR, DECELERATION ROLLER ASSY, TG3 RAIL, GUIDE SPRING, TG5 ROLLER (S1), LS GUIDE ARM ASSY, LS ROLLER, LS ROLLER (S2), LS GUIDE GEAR, CAM 822 823 824 825 826 1-677-049-11 3-079-328-01 3-079-326-02 3-079-301-01 3-079-298-01 FP-228 FLEXIBLE BOARD (DEW SENSOR) SCREW ,SPECIAL (EG GRIP) SUPPORT, TG7 SPRING (GLT), TORSION GEAR (T), GL SLIDER ASSY, M SPRING (PINCH), EXTENSION PLATE ASSY, TG2 CAM SHIELD, MOTOR HOLDER, MOTOR 827 828 829 830 M902 1-686-798-11 X-3952-927-2 X-3952-930-4 X-3952-929-3 A-7095-396-A FP-467 FLEXIBLE BOARD COASTER (S) ASSY ROLLER ASSY, TG5 COASTER (T) ASSY MOTOR BLOCK ASSY, L (LOADING) S902 1-477-679-11 ROTARY, ENCODER (SWITCH) 5-13 DCR-TRV33/TRV33E CD-431 CK-129 FP-626 JK-242 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. A-7013-527-A CD-431 BOARD, COMPLETE ********************** (IC5101 is not included in this COMPLETE board) Part No. Description < DIODE > D5203 D5205 8-719-056-85 DIODE UDZSTE-178.2B 6-500-289-01 DIODE MAZW082H0LS0 < CAPACITOR > < RESISTOR > C5101 C5102 C5103 C5105 C5106 1-164-004-11 1-107-826-11 1-125-777-11 1-125-777-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 25V 16V 10V 10V 16V C5108 C5110 C5111 C5112 C5113 1-125-777-11 1-113-987-11 1-104-851-11 1-107-826-11 1-125-777-11 CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 4.7uF 10uF 0.1uF 0.1uF 10% 20% 20% 10% 10% 10V 25V 10V 16V 10V C5114 C5116 1-135-259-11 TANTAL. CHIP 1-125-777-11 CERAMIC CHIP 10uF 0.1uF 20% 10% 6.3V 10V R5201 R5223 1-218-953-11 RES-CHIP 1-218-945-11 RES-CHIP 1K 220 5% 5% 1/16W 1/16W < SWITCH > S5203 S5207 1-771-138-82 SWITCH, KEY BOARD (RESET) 1-762-805-21 SWITCH, PUSH (1 KEY) (PANEL_XCLOSE/OPEN) ************************************************************ 1-687-550-11 FP-626 FLEXIBLE BOARD, COMPLETE ****************************** < SWITCH > < CONNECTOR > S101 1-771-039-31 SWITCH, PUSH (PANEL_REVERSE) ************************************************************ CN5101 1-691-360-11 CONNECTOR, FFC/FPC (ZIF) 22P < FERRITE BEAD > FB5101 1-414-445-11 FERRITE A-7013-551-A JK-242 BOARD, COMPLETE ********************** 0uH < CONNECTOR > < IC > IC5101 IC5102 CN5301 1-794-962-11 CONNECTOR, SQUARE TYPE(USB 5P)( (USB)) CN5302 1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV Interface) CN5303 1-691-380-21 CONNECTOR, FFC/FPC 16P A-7031-359-A CCD BLOCK ASSY (CCD IMAGER) 6-701-755-01 IC AD80017AJRURL < COIL > L5101 L5102 1-469-528-91 INDUCTOR 1-469-525-91 INDUCTOR < DIODE > 100uH 10uH D5302 D5304 < TRANSISTOR > Q5101 Q5101 6-550-119-01 TRANSISTOR 6-550-234-01 TRANSISTOR 8-719-062-16 DIODE 01ZA8.2(TPL3) 8-719-078-02 DIODE 1SS357(T3SONY1) < FERRITE BEAD > DTC144EMT2L UNR32A300LS0 FB5301 1-500-444-11 FERRITE FB5302 1-500-444-11 FERRITE < RESISTOR > 0uH 0uH < JACK > R5101 1-218-990-11 SHORT CHIP 0 R5102 1-218-990-11 SHORT CHIP 0 ************************************************************ J5301 1-778-040-11 JACK, SMALL TYPE (AUDIO/VIDEO) < LINE FILTER > A-7013-534-A CK-129 BOARD, COMPLETE ********************** LF5301 1-419-983-21 INDUCTOR 0uH < RESISTOR > < BATTERY > R5304 R5305 R5306 BT5201 1-756-128-11 BATTERY, LITHIUM (SECONDARY) 1-218-977-11 RES-CHIP 1-218-979-11 RES-CHIP 1-216-864-11 METAL CHIP 100K 150K 0 5% 5% 5% 1/16W 1/16W 1/16W < CONNECTOR > < VARISTOR > CN5205 CN5207 CN5208 CN5209 CN5210 1-778-506-21 1-766-866-21 1-691-354-21 1-766-336-21 1-794-376-21 PIN, CONNECTOR (PC BOARD) 2P CONNECTOR, FFC/FPC 6P CONNECTOR, FFC/FPC (ZIF) 16P CONNECTOR, FFC/FPC 6P PIN, CONNECTOR 4P VD5301 1-803-974-21 VARISTOR, CHIP (1608) VD5302 1-803-974-21 VARISTOR, CHIP (1608) VD5303 1-803-974-21 VARISTOR, CHIP (1608) ************************************************************ Be sure to read “Precautions upon replacing CCD imager” on page 4-9 when changing the CCD imager. CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 5-14 DCR-TRV33/TRV33E LB-085 Ref. No. Part No. Description Ref. No. Part No. A-7013-525-A LB-085 BOARD, COMPLETE ********************** 1-125-777-11 CERAMIC CHIP 1-164-505-11 CERAMIC CHIP CN5401 1-778-507-21 PIN, CONNECTOR (PC BOARD) 4P CN5402 1-815-235-11 CONNECTOR, FFC/FPC (ZIF) 37P 0.1uF 2.2uF 10% 10V 16V < DIODE > < CONNECTOR > CN5601 1-779-334-11 CONNECTOR, FFC/FPC 20P CN5602 1-691-354-21 CONNECTOR, FFC/FPC (ZIF) 16P < DIODE > D5602 6-500-375-01 DIODE NSCW455T-TC9 D5401 D5403 D5404 D5405 D5407 6-500-506-01 6-500-289-01 8-719-073-01 6-500-512-01 6-500-506-01 D5408 D5409 D5410 8-719-056-85 DIODE UDZSTE-178.2B 8-719-056-85 DIODE UDZSTE-178.2B 8-719-056-85 DIODE UDZSTE-178.2B < IC > IC5601 8-759-581-11 IC NJM2125F(TE2) 8-759-054-48 TRANSISTOR DIODE DIODE DIODE DIODE DIODE TLRMV1021(T15SOY,F) MAZW082H0LS0 MA111-(K8).S0 CL-330IRS-X-TU TLRMV1021(T15SOY,F) < FERRITE BEAD > < TRANSISTOR > Q5602 Description < CONNECTOR > < CAPACITOR > C5601 C5602 MA-421 UP04601008S0 < RESISTOR > R5603 1-208-941-11 METAL CHIP 180K 0.5% 1/16W R5604 1-208-719-11 METAL CHIP 33K 0.5% 1/16W R5605 1-218-956-11 RES-CHIP 1.8K 5% 1/16W R5606 1-216-839-11 METAL CHIP 33K 5% 1/16W R5607 1-211-983-11 METAL CHIP 39 0.5% 1/10W ************************************************************ FB5401 FB5402 FB5403 FB5404 FB5405 1-469-179-21 1-469-179-21 1-469-179-21 1-469-179-21 1-500-444-11 FERRITE FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 0uH FB5406 FB5407 FB5408 FB5409 FB5410 1-500-444-11 1-500-444-11 1-500-444-11 1-500-444-11 1-500-444-11 FERRITE FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 0uH FB5411 1-500-444-11 FERRITE 0uH < IC > A-7013-530-A MA-421 BOARD, COMPLETE *********************** IC5401 IC5501 6-600-047-01 IC RS-670 8-759-679-11 IC BH7870AKV-E2 < CAPACITOR > < JACK > C5404 C5501 C5502 C5503 C5504 1-127-760-11 1-107-819-11 1-164-943-11 1-107-819-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7uF 0.022uF 0.01uF 0.022uF 0.01uF 10% 10% 10% 10% 10% 6.3V 16V 16V 16V 16V C5505 C5506 C5510 C5511 C5512 1-164-943-11 1-135-259-11 1-164-937-11 1-135-259-11 1-164-874-11 CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP 0.01uF 10uF 0.001uF 10uF 100PF 10% 20% 10% 20% 5% 16V 6.3V 50V 6.3V 50V L5501 C5513 C5514 C5516 C5517 C5519 1-164-874-11 1-164-937-11 1-164-874-11 1-164-874-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.001uF 100PF 100PF 0.1uF 5% 10% 5% 5% 10% 50V 50V 50V 50V 10V R5401 R5402 R5403 R5405 R5406 1-216-864-11 1-218-956-11 1-216-864-11 1-216-805-11 1-218-956-11 METAL CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP 0 1.8K 0 47 1.8K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W C5520 C5521 C5523 C5528 C5529 1-125-777-11 1-125-777-11 1-125-777-11 1-164-942-11 1-164-942-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.0068uF 0.0068uF 10% 10% 10% 10% 10% 10V 10V 10V 16V 16V R5407 R5408 R5501 R5502 R5503 1-216-864-11 1-216-864-11 1-218-957-11 1-218-958-11 1-218-965-11 METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP 0 0 2.2K 2.7K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W C5532 C5535 C5537 1-119-750-11 TANTAL. CHIP 1-119-923-81 CERAMIC CHIP 1-119-923-81 CERAMIC CHIP 22uF 0.047uF 0.047uF 20% 10% 10% 6.3V 10V 10V R5504 R5505 R5506 R5507 R5508 1-218-961-11 1-218-990-11 1-218-957-11 1-218-957-11 1-218-963-11 RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 4.7K 0 2.2K 2.2K 6.8K 5% 1/16W 5% 5% 5% 1/16W 1/16W 1/16W J5401 J5402 J5404 J5405 1-691-737-41 1-793-995-11 1-694-688-11 1-569-950-41 JACK (SMALL TYPE) (MIC(PLUG IN POWER) JACK, SUPER SMALL TYPE (LANC) TERMINAL, S (S VIDEO) JACK (SMALL TYPE) (HEADPHONES) < COIL > 1-469-528-91 INDUCTOR 100uH < RESISTOR > 5-15 DCR-TRV33/TRV33E MA-421 Ref. No. PD-188 Part No. Description R5509 R5510 R5511 R5515 R5517 1-218-963-11 1-218-953-11 1-218-953-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 6.8K 1K 1K 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R5520 R5521 R5522 R5524 R5525 1-218-959-11 1-218-959-11 1-218-990-11 1-218-977-11 1-218-966-11 RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP 3.3K 3.3K 0 100K 12K 5% 5% 1/16W 1/16W 5% 5% 1/16W 1/16W R5527 R5530 R5531 R5532 R5533 1-218-959-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 3.3K 0 0 0 0 5% 1/16W R5534 1-218-990-11 SHORT CHIP Ref. No. Part No. Description C6024 C6101 C6103 C6104 0 C6105 1-107-826-11 1-115-566-11 1-164-657-11 1-125-777-11 1-100-371-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 4.7uF 0.015uF 0.1uF 12PF 10% 10% 10% 10% 5% 16V 10V 50V 10V 3.15KV < CONNECTOR > CN6001 CN6101 CN6201 CN6202 CN6203 1-815-031-11 1-764-709-11 1-794-997-11 1-794-376-21 1-691-344-11 CONNECTOR, FFC/FPC (ZIF) 24P CONNECTOR, FFC/FPC (LIF) 10P PIN, CONNECTOR 20P PIN, CONNECTOR 4P CONNECTOR, FFC/FPC (ZIF) 6P < DIODE > D6001 D6003 D6103 D6201 0 8-719-084-47 8-719-050-42 8-719-073-01 8-719-056-85 DIODE DIODE DIODE DIODE 1SV290(TPL3) RD3.3UM-T1B MA111-(K8).S0 UDZSTE-178.2B < SENSOR > < FERRITE BEAD > SE5401 1-476-807-31 SENSOR, ANGULAR VELOCITY (YAW) SE5402 1-476-807-41 SENSOR, ANGULAR VELOCITY (PITCH) FB6001 1-414-760-21 FERRITE FB6002 1-414-760-21 FERRITE 0uH 0uH < VARISTOR > < IC > VD5401 VD5402 VD5403 VD5407 VD5408 1-801-862-11 1-801-862-11 1-801-923-11 1-803-974-21 1-803-974-21 VARISTOR, CHIP VARISTOR, CHIP VARISTOR, CHIP VARISTOR, CHIP VARISTOR, CHIP (1608) (1608) (1608) (1608) (1608) IC6001 IC6002 IC6101 IC6102 VD5409 1-801-862-11 VARISTOR, CHIP (1608) VD5410 1-801-862-11 VARISTOR, CHIP (1608) ************************************************************ A-7013-528-A PD-188 BOARD, COMPLETE ********************** 8-752-109-08 8-752-407-33 8-759-564-49 8-759-075-70 IC IC IC IC CXA3289BR-T4 CXD3512R-T4 TC7W53FU(TE12R) TA75S393F-TE85R < COIL > L6001 L6002 L6101 1-469-525-91 INDUCTOR 1-412-949-21 INDUCTOR 1-428-878-11 INDUCTOR 10uH 6.8uH 82uH < TRANSISTOR > < CAPACITOR > C6001 C6002 C6003 C6004 C6005 1-127-760-11 1-135-259-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7uF 10uF 0.01uF 0.01uF 0.01uF 10% 20% 10% 10% 10% 6.3V 6.3V 16V 16V 16V C6007 C6008 C6009 C6010 C6011 1-125-777-11 1-164-943-11 1-135-177-21 1-164-943-11 1-164-739-11 CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.01uF 1uF 0.01uF 560PF 10% 10% 20% 10% 5% 10V 16V 20V 16V 50V C6012 C6013 C6014 C6015 C6016 1-125-777-11 1-162-964-11 1-109-982-11 1-164-870-11 1-165-908-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.001uF 1uF 68PF 1uF 10% 10% 10% 5% 10% 10V 50V 10V 50V 10V C6017 C6018 C6019 C6022 C6023 1-165-908-91 1-165-908-91 1-115-566-11 1-125-777-11 1-109-982-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 1uF 4.7uF 0.1uF 1uF 10% 10% 10% 10% 10% 10V 10V 10V 10V 10V Q6001 Q6002 Q6003 Q6004 Q6005 8-729-053-53 8-729-053-53 6-550-234-01 6-550-232-01 6-550-232-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR Q6101 Q6102 6-550-234-01 TRANSISTOR 6-550-065-01 TRANSISTOR HN1B04FE-Y/GR(TPLR3) HN1B04FE-Y/GR(TPLR3) UNR32A300LS0 2SA207800LS0 2SA207800LS0 UNR32A300LS0 CPH5504-TL-E < RESISTOR > 5-16 R6001 R6002 R6003 R6004 R6006 1-208-931-11 1-218-985-11 1-218-953-11 1-218-953-11 1-218-958-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 68K 470K 1K 1K 2.7K 0.5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R6007 R6008 R6009 R6010 R6011 1-218-973-11 1-218-973-11 1-218-975-11 1-218-969-11 1-218-975-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 47K 47K 68K 22K 68K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E PD-188 Ref. No. Ref. No. VA-118 Part No. Description Part No. Description R6012 R6013 R6014 R6015 R6016 1-218-989-11 1-218-977-11 1-218-965-11 1-218-965-11 1-218-953-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1M 100K 10K 10K 1K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W C4214 C4215 C4216 C4217 C4301 1-125-837-91 1-125-837-91 1-109-994-11 1-164-505-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 1uF 2.2uF 2.2uF 0.1uF 10% 10% 10% 10% 6.3V 6.3V 10V 16V 10V R6017 R6018 R6019 R6020 R6021 1-218-973-11 1-218-966-11 1-218-989-11 1-218-975-11 1-218-979-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 47K 12K 1M 68K 150K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W C4302 C4303 C4304 C4305 C4306 1-125-777-11 1-104-847-11 1-104-847-11 1-119-923-81 1-119-923-81 CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 22uF 22uF 0.047uF 0.047uF 10% 20% 20% 10% 10% 10V 4V 4V 10V 10V R6022 R6023 R6103 R6104 R6105 1-208-957-11 1-218-990-11 1-218-965-11 1-218-980-11 1-218-969-11 RES-CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 820K 0 10K 180K 22K 5% 1/16W 5% 5% 5% 1/16W 1/16W 1/16W C4307 C4308 C4309 C4310 C4311 1-119-923-81 1-119-923-81 1-137-710-11 1-137-710-11 1-137-710-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.047uF 0.047uF 10uF 10uF 10uF 10% 10% 20% 20% 20% 10V 10V 6.3V 6.3V 6.3V R6106 R6107 R6108 R6110 1-216-055-00 1-218-965-11 1-218-969-11 1-218-949-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP 1.8K 10K 22K 470 5% 5% 5% 5% 1/10W 1/16W 1/16W 1/16W C4312 C4314 C4501 C4502 C4503 1-137-710-11 1-127-760-11 1-125-777-11 1-125-777-11 1-107-819-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10uF 4.7uF 0.1uF 0.1uF 0.022uF 20% 10% 10% 10% 10% 6.3V 6.3V 10V 10V 16V C4504 C4505 C4506 C4507 C4508 1-164-941-11 1-119-923-81 1-119-923-81 1-125-777-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0047uF 0.047uF 0.047uF 0.1uF 0.01uF 10% 10% 10% 10% 10% 16V 10V 10V 10V 16V C4509 C4510 C4511 C4512 C4513 1-125-777-11 1-164-934-11 1-125-777-11 1-165-908-91 1-107-819-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 330PF 0.1uF 1uF 0.022uF 10% 10% 10% 10% 10% 10V 50V 10V 10V 16V C4514 C4515 C4516 C4517 C4518 1-125-777-11 1-165-908-91 1-107-819-11 1-119-923-81 1-165-875-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 1uF 0.022uF 0.047uF 10uF 10% 10% 10% 10% 10% 10V 10V 16V 10V 10V C4520 C4521 C4522 C4523 C4526 1-109-982-11 1-115-566-11 1-115-566-11 1-125-838-11 1-115-566-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 4.7uF 4.7uF 2.2uF 4.7uF 10% 10% 10% 10% 10% 10V 10V 10V 6.3V 10V C4527 C4528 C4529 C4530 C4531 1-127-861-11 1-109-982-11 1-115-566-11 1-127-760-11 1-115-566-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 2.2uF 1uF 4.7uF 4.7uF 4.7uF 10% 10% 10% 10% 10% 16V 10V 10V 6.3V 10V C4532 C4533 C4535 C4536 C4537 1-127-760-11 1-127-760-11 1-115-566-11 1-115-566-11 1-127-861-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7uF 4.7uF 4.7uF 4.7uF 2.2uF 10% 10% 10% 10% 10% 6.3V 6.3V 10V 10V 16V C4538 C4539 C4540 C4541 C4542 1-119-750-11 1-104-851-11 1-125-827-91 1-127-760-11 1-135-259-11 TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP 22uF 10uF 1uF 4.7uF 10uF 20% 20% 10% 10% 20% 6.3V 10V 25V 6.3V 6.3V < COMPOSITION CIRCUIT BLOCK > RB6001 1-234-372-21 RES, NETWORK 100X4 (1005) < TRANSFORMER > 0 T6101 1-435-786-31 TRANSFORMER, INVERTER ************************************************************ A-7013-555-A VA-118 BOARD, COMPLETE ********************** < CAPACITOR > C4001 C4002 C4003 C4005 C4109 1-125-777-11 1-125-777-11 1-125-777-11 1-127-760-11 1-119-749-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP 0.1uF 0.1uF 0.1uF 4.7uF 33uF 10% 10% 10% 10% 20% 10V 10V 10V 6.3V 4V C4110 C4111 C4112 C4113 C4114 1-164-943-11 1-162-969-11 1-107-826-11 1-164-854-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.0068uF 0.1uF 15PF 0.01uF 10% 10% 10% 5% 10% 16V 25V 16V 50V 16V C4115 C4116 C4117 C4201 C4203 1-164-943-11 1-164-854-11 1-125-777-11 1-127-760-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 15PF 0.1uF 4.7uF 0.01uF 10% 5% 10% 10% 10% 16V 50V 10V 6.3V 16V C4204 C4205 C4206 C4207 C4208 1-164-943-11 1-164-943-11 1-164-943-11 1-164-739-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 560PF 0.1uF 10% 10% 10% 5% 10% 16V 16V 16V 50V 10V C4209 C4210 C4211 C4212 C4213 1-113-986-11 1-164-937-11 1-164-943-11 1-164-876-11 1-125-837-91 TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 2.2uF 0.001uF 0.01uF 120PF 1uF 20% 10% 10% 5% 10% 25V 50V 16V 50V 6.3V 5-17 Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E VA-118 Ref. No. Part No. Description C4543 C4544 C4545 C4546 C4547 1-135-259-11 1-135-259-11 1-135-259-11 1-135-259-11 1-135-259-11 TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP 10uF 10uF 10uF 10uF 10uF 20% 20% 20% 20% 20% 6.3V 6.3V 6.3V 6.3V 6.3V Ref. No. Part No. Description C4548 C4549 C4550 C4551 C4553 1-119-750-11 1-135-259-11 1-113-988-11 1-125-777-11 1-117-720-11 TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 22uF 10uF 68uF 0.1uF 4.7uF 20% 20% 20% 10% 6.3V 6.3V 4V 10V 10V C4554 C4555 C4557 C4558 C4559 1-115-566-11 1-164-506-11 1-164-505-11 1-135-259-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP 4.7uF 4.7uF 2.2uF 10uF 0.1uF 10% 20% 10% 10V 16V 16V 6.3V 16V C4560 C4562 C4601 C4602 C4603 1-127-760-11 1-162-970-11 1-125-777-11 1-125-777-11 1-107-819-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 4.7uF 0.01uF 0.1uF 0.1uF 0.022uF 10% 10% 10% 10% 10% 6.3V 25V 10V 10V 16V L4201 L4202 L4301 L4501 L4502 1-469-525-91 1-469-891-21 1-469-570-21 1-416-670-11 1-416-669-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10uH 6.8uH 10uH 33uH 22uH C4604 C4605 C4606 C4607 1-119-751-11 1-119-751-11 1-119-751-11 1-109-982-11 TANTAL. CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP 22uF 22uF 22uF 1uF 20% 20% 20% 10% 16V 16V 16V 10V L4503 L4504 L4505 L4506 L4507 1-416-669-11 1-416-669-11 1-416-670-11 1-416-669-11 1-416-670-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 22uH 22uH 33uH 22uH 33uH L4508 L4509 L4510 L4511 L4512 1-469-524-91 1-469-524-91 1-469-757-21 1-469-524-91 1-469-524-91 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 4.7uH 4.7uH 10uH 4.7uH 4.7uH L4513 L4514 L4515 L4516 L4517 1-469-524-91 1-469-524-91 1-469-526-91 1-469-524-91 1-469-524-91 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 4.7uH 4.7uH 22uH 4.7uH 4.7uH L4518 L4519 L4520 L4521 L4601 1-469-524-91 1-469-524-91 1-469-524-91 1-469-524-91 1-412-056-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 4.7uH 4.7uH 4.7uH 4.7uH 4.7uH < FERRITE BEAD > FB4201 1-469-676-22 FERRITE FB4202 1-500-329-21 FERRITE 0uH 0uH < IC > IC4101 IC4201 IC4202 IC4301 IC4502 6-803-026-01 8-752-109-08 8-752-405-57 8-759-489-19 6-703-429-01 IC IC IC IC IC MB89097PFV-G-155-BND-ER-E1 CXA3289BR-T4 CXD3501AR-T4 uPC6756GR-8JG-E2 MB44A120APFV-G-BND-ERE1 IC4504 6-703-227-01 IC TK11131CSCL-G < COIL > < CONNECTOR > CN4001 CN4002 CN4003 CN4004 CN4005 1-691-374-11 1-766-613-21 1-794-998-31 1-774-603-21 1-691-354-21 CONNECTOR, FFC/FPC 10P CONNECTOR, FFC/FPC 36P PIN, CONNECTOR 20P CONNECTOR, BOARD TO BOARD 100P CONNECTOR, FFC/FPC (ZIF) 16P CN4201 1-766-350-21 CONNECTOR, FFC/FPC 20P * CN4602 1-580-056-21 PIN, CONNECTOR (SMD) 3P * CN4603 1-580-056-21 PIN, CONNECTOR (SMD) 3P < DIODE > D4001 D4002 D4101 D4102 D4103 6-500-289-01 6-500-289-01 8-719-073-01 8-719-056-85 8-719-056-85 DIODE DIODE DIODE DIODE DIODE MAZW082H0LS0 MAZW082H0LS0 MA111-(K8).S0 UDZSTE-178.2B UDZSTE-178.2B D4201 D4502 D4503 D4504 D4507 8-719-084-47 8-719-421-27 6-500-314-01 8-719-074-08 8-719-074-08 DIODE DIODE DIODE DIODE DIODE 1SV290(TPL3) MA728-(K8).S0 DAN222MT2L MA4ZD03001S0 MA4ZD03001S0 D4601 D4602 D4603 D4604 6-500-289-01 8-719-081-19 8-719-056-23 8-719-056-23 DIODE DIODE DIODE DIODE MAZW082H0LS0 1SS383(T5RSONY1) 1SS387-TPL3 1SS387-TPL3 < LINE FILTER > LF4602 1-456-391-21 INDUCTOR < TRANSISTOR > < FUSE > 0 F4601 0 F4602 0 F4603 0 F4604 0 F4605 1-576-406-21 1-576-406-21 1-576-406-21 1-576-406-21 1-576-406-21 FUSE FUSE FUSE FUSE FUSE 1.4A 1.4A 1.4A 1.4A 1.4A 0uH 32V 32V 32V 32V 32V 5-18 Q4001 Q4002 Q4003 Q4004 Q4005 6-550-102-01 6-550-235-01 6-550-238-01 8-729-053-57 8-729-054-44 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC5663T2L UNR32A500LS0 UNR31A100LS0 RN1902FE(TPLR3) RN2902FE(TPLR3) Q4101 Q4504 Q4505 Q4506 Q4507 8-729-041-43 6-550-351-01 6-550-405-01 6-550-351-01 6-550-559-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR HN1L02FU(TE85R) CPH5812-TL-E CPH5815-TL-E CPH5812-TL-E XN0NE9200LS0 Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E VA-118 Ref. No. Part No. Description Part No. Description Q4508 Q4509 Q4510 Q4513 Q4514 6-550-351-01 6-550-405-01 6-550-560-01 6-550-237-01 8-729-101-07 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR CPH5812-TL-E CPH5815-TL-E CPH5819-TL-E 2SC584600LS0 2SB798-T1-DLDK Ref. No. R4211 R4212 R4213 R4214 R4215 1-218-989-11 1-218-977-11 1-208-927-11 1-218-989-11 1-218-953-11 RES-CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP 1M 100K 47K 1M 1K 5% 5% 0.5% 0.5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W Q4515 Q4516 Q4517 Q4518 Q4519 6-550-237-01 6-550-232-01 6-550-232-01 8-759-054-50 8-759-054-50 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC584600LS0 2SA207800LS0 2SA2029T2LQ/R UP04501008S0 UP04501008S0 R4301 R4302 R4303 R4304 R4501 1-218-989-11 1-218-965-11 1-218-965-11 1-218-989-11 1-220-200-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1M 10K 10K 1M 30K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W Q4520 Q4521 Q4524 Q4525 Q4526 6-550-237-01 8-729-054-49 8-729-216-22 8-759-054-50 6-550-406-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC584600LS0 UP04401008S0 2SA1162-YG-TE85L UP04501008S0 MCH3335-S-TL-E R4502 R4503 R4504 R4505 R4506 1-218-953-11 1-218-961-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 1K 4.7K 0 0 0 5% 5% 1/16W 1/16W Q4601 Q4602 Q4603 Q4604 Q4608 8-729-047-68 6-550-404-01 8-729-101-07 6-550-234-01 8-729-056-19 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR SSM3K03FE(TPL3) UPA1858GR-9JG-E2-A 2SB798-T1-DLDK UNR32A300LS0 TPC6101(TE85R) R4507 R4508 R4509 R4510 R4511 1-218-990-11 1-218-990-11 1-218-990-11 1-218-961-11 1-218-970-11 SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 0 0 0 4.7K 27K 5% 5% 1/16W 1/16W Q4610 6-550-234-01 TRANSISTOR UNR32A300LS0 R4512 R4513 R4514 R4515 R4516 1-218-965-11 1-218-971-11 1-218-972-11 1-218-953-11 1-218-953-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 33K 39K 1K 1K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R4517 R4518 R4519 R4520 R4522 1-208-697-11 1-208-910-11 1-218-990-11 1-208-927-11 1-218-990-11 METAL CHIP RES-CHIP SHORT CHIP METAL CHIP SHORT CHIP 3.9K 9.1K 0 47K 0 0.5% 5% 1/16W 1/16W 0.5% 1/16W R4523 R4524 R4525 R4526 R4537 1-218-977-11 1-216-789-11 1-218-990-11 1-218-935-11 1-218-966-11 RES-CHIP METAL CHIP SHORT CHIP RES-CHIP RES-CHIP 100K 2.2 0 33 12K 5% 5% 1/16W 1/16W 5% 5% 1/16W 1/16W R4538 R4539 R4540 R4541 R4543 1-218-977-11 1-218-973-11 1-218-973-11 1-218-977-11 1-218-977-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100K 47K 47K 100K 100K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R4545 R4546 R4547 R4549 R4550 1-218-961-11 1-218-969-11 1-218-969-11 1-218-969-11 1-208-703-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP 4.7K 22K 22K 22K 6.8K 5% 5% 5% 5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R4551 R4552 R4553 R4554 R4555 1-218-965-11 1-208-935-11 1-208-721-11 1-208-703-11 1-208-935-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 100K 39K 6.8K 100K 5% 0.5% 0.5% 0.5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R4556 R4557 R4561 R4562 R4563 1-218-965-11 1-208-943-11 1-218-977-11 1-218-949-11 1-208-703-11 RES-CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP 10K 220K 100K 470 6.8K 5% 0.5% 5% 5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R4564 R4567 R4601 R4604 R4605 1-208-711-11 1-218-990-11 1-218-953-11 1-218-977-11 1-218-989-11 METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 15K 0 1K 100K 1M 0.5% 1/16W 5% 5% 5% 1/16W 1/16W 1/16W < RESISTOR > R4002 R4004 R4005 R4006 R4007 1-218-953-11 1-216-009-91 1-216-009-91 1-218-939-11 1-218-959-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 22 22 68 3.3K R4008 R4009 R4103 R4104 R4105 1-218-990-11 1-218-990-11 1-218-989-11 1-218-977-11 1-218-990-11 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP 0 0 1M 100K 0 R4106 R4109 R4110 R4111 R4112 1-218-973-11 1-218-977-11 1-218-977-11 1-208-935-11 1-218-989-11 RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP R4113 R4114 R4115 R4116 R4117 1-218-961-11 1-219-570-11 1-218-985-11 1-208-927-11 1-218-990-11 R4118 R4119 R4120 R4121 R4122 5% 5% 5% 5% 5% 1/16W 1/10W 1/10W 1/16W 1/16W 5% 5% 1/16W 1/16W 47K 100K 100K 100K 1M 5% 5% 5% 0.5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W RES-CHIP METAL CHIP METAL CHIP METAL CHIP SHORT CHIP 4.7K 10M 470K 47K 0 5% 5% 0.5% 0.5% 1/16W 1/10W 1/16W 1/16W 1-216-857-11 1-218-949-11 1-218-977-11 1-218-977-11 1-218-977-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1M 470 100K 100K 100K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R4123 R4124 R4201 R4202 R4204 1-218-989-11 1-218-965-11 1-218-985-11 1-208-935-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP METAL CHIP SHORT CHIP 1M 10K 470K 100K 0 5% 5% 5% 0.5% 1/16W 1/16W 1/16W 1/16W R4206 R4207 R4208 R4209 R4210 1-218-958-11 1-218-973-11 1-218-975-11 1-218-969-11 1-218-975-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 2.7K 47K 68K 22K 68K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 5-19 DCR-TRV33/TRV33E VA-118 Ref. No. VC-313 Part No. Description R4607 R4608 R4609 R4611 R4614 1-216-797-11 1-218-954-11 1-218-963-11 1-218-953-11 1-218-989-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP R4615 1-218-965-11 RES-CHIP Ref. No. 10 1.2K 6.8K 1K 1M 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 10K 5% 1/16W Part No. Description A-7016-142-A VC-313 BOARD, COMPLETE (SERVICE)(TRV33) ************************************** A-7016-330-A VC-313 BOARD, COMPLETE (SERVICE)(TRV33E) ************************************** ************************************************************ < COMPOSITION CIRCUIT BLOCK > RB4101 RB4104 RB4105 RB4106 RB4107 1-234-378-21 1-234-375-21 1-234-375-21 1-234-375-21 1-234-375-21 RES, NETWORK 10KX4 RES, NETWORK 1KX4 RES, NETWORK 1KX4 RES, NETWORK 1KX4 RES, NETWORK 1KX4 (1005) (1005) (1005) (1005) (1005) RB4108 RB4109 RB4201 RB4301 1-234-375-21 1-234-381-21 1-234-372-21 1-234-379-21 RES, NETWORK 1KX4 RES, NETWORK 100KX4 RES, NETWORK 100X4 RES, NETWORK 22KX4 (1005) (1005) (1005) (1005) Electrical parts list of the VC-313 board are not shown. Pages from 5-21 to 5-26 are not shown. < VIBRATOR > X4101 1-760-458-21 VIBRATOR, CRYSTAL (32.768KHZ) X4102 1-795-244-11 VIBRATOR, CERAMIC (10MHz) ************************************************************ 5-20 DCR-TRV33/TRV33E Ver 1.1 2003. 06 Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Power cord (Main lead)(1) (AUS model) 0 1-696-819-21 Power cord (Main lead)(1) (AEP, E, EE, NE model) 0 1-769-608-11 Power cord (Main lead)(1) (CH model) 0 1-782-476-11 Power cord (Main lead)(1) (UK, HK model) 0 1-783-374-11 Power cord (Main lead)(1) (US, CND model) 0 1-790-107-22 Power cord (Main lead)(1) (JE model) 0 1-790-732-11 Power cord (Main lead)(1) (KR model) 0 1-776-985-11 CD-ROM (SPVD-008 USB Driver) (1) (AEP, UK, EE, NE, E, HK, AUS, JE, KR, CH model) 3-078-942-01 CD-ROM (SPVD-008(I) USB Driver) (1) (US,CND model) 3-078-943-01 AC power adaptor (1) (AC-L15A) (US,CND,AEP,UK,EE,NE,E, AUS,HK,KR,JE model) 0 1-477-533-31 AC power adaptor (1) (AC-L15B) (CH model) 0 1-477-533-41 NP-FM30 battery pack (1) 0 A-7096-387-A (US, CND model) 0 A-7096-388-B (Except US, CND model) R6 (size AA) batteries for the Remote Commander (2) (not supplied) A/V connecting cable (1.5m) (1) 1-824-097-11 Shoulder strap (1) 3-987-015-01 Lens cap (1) X-3953-088-1 Lid Battery Case (3-742-854-01) Wireless Remote Commander (1) (RMT-814E) 1-475-141-61 Cleaning cloth (1) 3-073-861-01 Shoe cover (1) 3-080-571-01 21-pin adaptor (1) (AEP, UK, EE, NE model) 1-770-783-21 “Memory Stick” (1) (MSA-8A) A-7024-735-A 2-pin conversion adaptor (1) (TRV33:JE/TRV33E:JE only) 1-569-007-12 • Abbreviation CND : Canadian model EE : East European model NE : North European model HK : Hong Kong model USB cable (1) 1-823-931-11 2-pin conversion adaptor (1) (TRV33:E,HK/TRV33E:E,HK only) 1-569-008-12 AUS CH JE KR : Australian model : Chinese model : Tourist model : Korea model Other accessories 3-080-369-11 MANUAL, INSTRUCTION (ENGLISH) (TRV33:US,CND,E,HK,JE) 3-080-369-21 MANUAL, INSTRUCTION (FRENCH)(TRV33:CND) 3-080-369-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (TRV33:E,JE) 3-080-369-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (TRV33:E,HK) 3-080-369-51 MANUAL, INSTRUCTION (KOREAN) (TRV33:JE,KR) 3-080-369-61 MANUAL, INSTRUCTION (ARABIC) (TRV33:E) 3-080-368-11 MANUAL, INSTRUCTION (ENGLISH/FRENCH) (TRV33E:AEP,UK,AUS,CH,HK,JE) 3-080-368-21 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE) (TRV33E:AEP) 3-080-368-31 MANUAL, INSTRUCTION (ITALIAN/GREEK) (TRV33E:AEP) 3-080-368-41 MANUAL, INSTRUCTION (GERMAN/DUTCH) (TRV33E:AEP) 5-27E 3-080-368-51 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN) (TRV33E:NE,E,JE) 3-080-368-61 MANUAL, INSTRUCTION (DANISH/FINNISH) (TRV33E:NE) 3-080-368-71 MANUAL, INSTRUCTION (ARABIC/PERSIAN) (TRV33E:E) 3-080-368-81 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (TRV33E:HK) 3-080-368-91 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (TRV33E:E,CH,JE) Note : The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note : Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DCR-TRV33/TRV33E 9-876-223-31 Sony EMCS Co. — 126 — 2003K1600-1 ©2003.11 Published by DI CS Strategy Div. DCR-TRV33/TRV33E RMT-814 LEVEL 2 US Model Canadian Model Korea Model SERVICE MANUAL DCR-TRV33 Ver 1.2 2003. 09 AEP Model UK Model North European Model East European Model Chinese Model Australian Model DCR-TRV33E E Model Hong Kong Model Tourist Model DCR-TRV33/TRV33E SUPPLEMENT-1 File this supplement-1 with the Service Manual. Subject : Addition of supplied parts SECTION 5 REPAIR PARTS LIST 5-1. EXPLODED VIEWS Page : Added portion. After Change Before Change 5-1-5. CABINET L SECTION 219 202 218 216 219 202 220 217 207 ns 203 Ref. No. 221 Part No. ns 203 222 Description Ref. No. S072 9-876-223-81 220 217 207 5-7 218 216 Sony EMCS Co. 221 Part No. S072 222 Description 1-786-179-41 SWITCH, PUSH (1KEY) (OPEN/ZEJECT ) 2003I1600-1 ©2003.9 Published by DI CS Strategy Div. Reverse 987622334.pdf Revision History History Contents S.M. Rev. issued — Ver. Date 1.0 2003.02 Official Release 1.1 2003.06 Correction-1 Change of the parts S.M. Correction: Page 5-9, Page 5-11, Page 5-27 Yes 1.2 2003.09 Supplement-1 Addition of supplied parts No 1.3 2003.11 Correction-2 Correction of the SELF-DIAGNOSIS CODE TABLE. S.M. correction: Page 1-3 Yes —
Similar documents
DSC-W5/W7/W15/W17
For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-856-41). This service manual contains information for Japanese model as well. Reference No. search on printed wiring boards is availa...
More informationDCR-PC4E/PC5/PC5E
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU ...
More informationSTR-DA3300ES/DG1100
If there is a malfunction, the display shows a code of two numbers and a message. You can check the condition of the system by the
More information