quick connect couplings hansenpneumatic
Transcription
quick connect couplings hansenpneumatic
H A N S E N P N E U M A T I C QUICK CONNECT COUPLINGS Aro Interchange Industrial Interchange H A N S E N C O U P L I N G S By focusing exclusively on couplings, Tuthill Coupling Group has achieved a competitive edge in providing the world’s best and most complete line of quick disconnect couplings. The quick connect/disconnect coupling was first developed and manufactured by Hansen Manufacturing Company, founded in 1915 by Fred Hansen. Since then, the Hansen coupling has become the industry 100% standard for all quick connect disconnect couplings. Tuthill Coupling Group designs, manufactures and distributes a broad range of couplings in brass, steel, stainless steel and plastic. These products are used to quickly connect and disconnect a wide variety of fluids and gases, especially air and hydraulic oil. The bodies, sleeves and plugs are manufactured by Tuthill Coupling Group, then plated or bright-dipped and/or hardened as required, and then assembled with other components such as steel balls, seals and valves. Hansen Couplings are available in over 3,000 configurations which are marketed to end users and original equipment manufacturers all over the world. Since Hansen was purchased by Tuthill Corporation in 1979, it has maintained a steady pattern of growth. Tuthill Coupling Group, an ISO 9001 Certified Company, will continue to be a major factor in this market by offering a comprehensive range of products which are thoroughly researched, carefully designed, and precision manufactured. In 1998, Tuthill Coupling Group fully implemented SAP-R3 Business Software offering distinct advantages to our customers while assuring full Y2K compliance. Our products are widely distributed through an increasingly strong network of worldwide distributors that are well versed in the engineered fluid power product needs of our customers. 2 PRODUCT ENGINEERING Many designs created as fullspecials have now become the world standard. Tuthill Coupling Group has provided full service solutions, dedicated exclusively to quick disconnect applications. Tuthill Coupling Group’s engineers develop new products and modify designs of existing products using the latest Computer Aided Design programs. PRODUCT DESIGN & PROTOTYPE Tuthill Coupling Group’s state of the art prototype development lab offers a unique environment for cycle testing, pressure testing and full model shop manufacturing. Quality controlled standards insure complete success on new and standard product designs. Tuthill Coupling Group products maintain a constantly high level of quality and dependability through extensive product testing and evaluation. QUALITY CONTROL Tuthill Coupling Group uses the highest quality raw materials and components that are machined and meticulously assembled to rigid ISO 9001 standards. Care is taken to record and maintain specific tolerances in the day-to-day production of our products through Statistical Process Control and constant monitoring and calibrating of our production equipment. CUSTOMER SERVICE Your highly trained inside sales representative is equipped to aid customers in product selection and to ensure your order is processed quickly, efficiently and accurately. Our customer fulfillment staff works closely with their corresponding outside sales individual to ensure consistent personalized assistance from the time an order is placed to the final assembly point of the product. Our distributors are strategically located throughout the world to provide prompt delivery of Hansen Couplings. Tuthill Coupling Group’s goal is to provide our customers with the best service and technical support available. 3 Description & Selection Sockets/Plugs Defined Socket: Also referred to as “Coupling”, “Connector” or “Quick Disconnect”. A socket consists of a spring-loaded shutoff valve and a positive locking mechanism. It is used to connect equipment to a fluid, such as compressed air, through a mating plug. Plug: Also referred to as “Connector” or “Nipple”. The mating device that is inserted into the socket and locked to complete the connection. Plugs are unvalved, exhausting downstream line at disconnection. Type SINGLE SHUT-OFF (One-Way): Socket only is valved to shut off supply line at disconnection. Plug is unvalved, exhausting downstream line at disconnection. Most applications use the single shutoff type. Socket should be installed on the pressurized side of the line. Operation MANUAL SOCKET: Socket sleeve must be manually retracted to engage and disengage a plug. AUTOMATIC SOCKET: Simply push the plug into the socket to connect. Manually retract sleeve to disengage plug. SAFETY SOCKET: Allows connection and disconnection at “0” pressure. Plug is securely locked before valve is opened; downstream line is exhausted before plug is removed, eliminating hose “kick”. Full-Bore Series are safety vent sockets. Styles & Interchangeability The style or interchange of plug in use will determine the socket style. There are several styles used throughout industry today, each developed and made popular by a specific manufacturer. Key identification features are the length of the nose and type of locking groove. Selection 1. IDENTIFY/SELECT THE PLUG DESIGN: Choose the socket and plug style desired, or determine the style plug in use (by the key identification features described above) to select the socket required. 2. DETERMINE THE PROPER SIZE (CAPACITY) REQUIRED: Determine volume of air required (scfm) at the applied pressure and match to the capacity socket and plug, or match inside diameter of hose used to the socket capacity. Do not design in choke points, such as a 1/2” hose I.D. with a 1/4” capacity QD. This restricts air flow, reducing equipment performance. The capacities of the mating socket and plug must be the same. 3. SELECT THE DESIRED SOCKET OPERATION: Automatic Sockets are faster and easier to use. Safety Sockets, with a venting feature, are particularly attractive for higher pressure, larger hose diameter applications. 4. SELECT THE SIZE AND TYPE END CONNECTION: The size and type of connection at the end of the pipe, hose or inlet port will determine the end connection needed on the socket or plug. NOTE: Sockets and plugs with hose barb end connection require the use of a hose clamp. 4 Body (capacity) End Connection End Connection Sleeve Style SOCKET (COUPLER) PLUG (CONNECTER) Socket & Plug Identification 210, 310, MS, High-Flow, and Full-Bore Socket & Plug Recognition Shown are different plug styles for single-valved, sleeve-type Quick-Connective couplings. The shape and configuration of the plug nose controls whether interchange can be achieved between sockets and plugs made by different manufacturers. 210 Series Socket Two identical knurled bands on the sleeve. Pin-type locking mechanism. Available in 1/4” capacity only. Use with 1/4” capacity - Aro 210 interchange plugs. 1/4” Size 3/8” Size 1/2” Size 310 Series Socket One wide knurled bands on the rear of the sleeve. Pin-type locking mechanism. Available in 3/8” capacity only. Use with 3/8” capacity - Aro 310 interchange plugs. MS Series Socket Three identical knurled bands on the sleeve. Pin-type locking mechanism. Available in 1/4” capacity only. Use with industrial interchange plugs. High-Flow Series Socket Three identical knurled bands on the sleeve. Ball-type locking mechanism. Protective sleeve guard cap on front end. Available in 1/4”, 3/8” and 1/2” capacities. Use with industrial interchange plugs. Full-Bore Series Socket Steel sleeve to open and close air passage. Ball-type locking mechanism. Available in 3/8” and 1/2” capacities. Use with industrial interchange plugs. 5 Series 210 Interchange The 210 Series is a 1/4” capacity automatic, pin-type coupling designed for one-way shutoff operation. • Average Flow: 18 cfm at 90 PSIG (6.2 BAR) inlet 10 PSIG (0.69 BAR) pressure drop Body Size 1/4” 1/4” Body Size 1/4” 1/4” BAR 17 Q-RATE OF FLOW (DM3/S of AIR) 15 20 25 30 35 40 Part No. Steel 210-212 210-213 Thread Size 1/4” NPT 3/8” NPT PLUG Operating Pressure 10 Brass SOCKET • Maximum Inlet Pressure: 250 PSIG (17 BAR) 5 OPTION – MATERIAL Carbon Steel Carbon Steel Hard Drawn Steel Wire Carbon Steel Celcon® Hard Drawn Steel Wire Buna-N Alloy Steel Carbon Steel Male End Connections • Temperature Range: -40°F to 200°F (-40°C to 93°C) PSI 250 STANDARD MATERIAL Socket Body Socket Sleeve Socket Sleeve Spring Socket Ends Socket Valve Socket Valve Spring Socket Valve Washer Socket Locking Pins Plug Body 1/4” 210 Series - Any 1/4” Socket will work with any 1/4” Plug Features Series 210 PART DESCRIPTION Male End Connections 1/8” NPT 1/4” NPT Female End Connections 45 20 Part No. Steel 2607 2608 1.3 1.2 0.9 0.8 12 0.7 0.6 8 0.5 0.4 0.3 4 0.2 ∆ P-PRESSURE DROP (BAR) 1.0 210 ∆ P-PRESSURE DROP (P.S.I.) 1.1 16 SOCKET Body Size 1/4” 1/4” Part No. Steel 210 62210† Thread Size 1/4” NPT 1/4” NPT † Same as Model 210 but with brass valve 0.1 10 20 30 40 50 60 70 80 90 Q-RATE OF FLOW (SCFM of AIR at 90 PSIG [6.2 BAR] INLET) 210 Series 6 PLUG Body Size 1/4” Part No. Steel 2609 Female End Connections 1/4” NPT Hose Stem End Connections SOCKET Body Size 1/4” 1/4” Part No. Steel 210-022 210-215 Hose I.D. 1/4” 3/8” Part No. Steel 3946 3947 22238 Hose I.D. 1/4” 5/16” 3/8” PLUG Body Size 1/4” 1/4” 1/4” Series 310 Interchange PART DESCRIPTION Socket Body Socket Sleeve Socket Sleeve Spring Socket Ends Socket Valve Socket Valve Spring Socket Valve Washer Socket Locking Pins Plug Body STANDARD MATERIAL Carbon Steel Carbon Steel Hard Drawn Steel Wire Carbon Steel Carbon Steel Hard Drawn Steel Wire Buna-N Alloy Steel Carbon Steel 3/8” 310 Series - Any 3/8” Socket will work with any 3/8” Plug Male End Connections Part No. Steel 310-313 Thread Size 3/8” NPT PLUG Body Size 3/8” 3/8” Part No. Steel 22239 3804 Features • Average Flow: 60cfm at 90 PSIG (6.2 BAR) inlet 10 PSIG (0.69 BAR) pressure drop • Temperature Range: -40°F to 200°F (-40°C to 93°C) SOCKET Body Size 3/8” The 310 Series is a 3/8” capacity automatic, pin-type coupling designed for one-way shutoff operation. Male End Connections 1/4” NPT 3/8” NPT • Maximum Inlet Pressure: 250 PSIG (17 BAR) Operating Pressure Series 310 Female End Connections PSI 250 5 10 BAR 17 Q-RATE OF FLOW (DM3/S of AIR) 15 20 25 30 35 40 45 20 1.3 1.2 SOCKET 1.0 0.9 0.8 12 0.7 0.6 8 0.5 0.4 0.3 4 0.2 ∆ P-PRESSURE DROP (BAR) Thread Size 3/8” NPT 310 Part No. Steel 310 ∆ P-PRESSURE DROP (P.S.I.) Body Size 3/8” 1.1 16 0.1 PLUG Body Size 3/8” 10 Part No. Steel 3806 Female End Connections 3/8” NPT Hose Stem End Connections SOCKET Body Size 3/8” Part No. Steel 310-222 Hose I.D. 3/8” Part No. Steel 3807 Hose I.D. 3/8” PLUG Body Size 3/8” 20 30 40 50 60 70 80 90 Q-RATE OF FLOW (SCFM of AIR at 90 PSIG [6.2 BAR] INLET) 310 Series 7 Series MS Industrial Interchange The MS Series is an economical automatic-type one-way shutoff coupler that provides the ease of push-to-connect use. With steel pins securing the mating connector, the MS Series is available in 1/4” capacity and conforms to MIL-C-4109 dimensional requirements. PART DESCRIPTION STANDARD MATERIAL Socket Socket Socket Socket Socket Socket Socket Socket Carbon Steel Carbon Steel Hard Drawn Steel Wire Carbon Steel Carbon Steel Hard Drawn Steel Wire Buna-N Alloy Steel Body Sleeve Sleeve Spring Ends Valve Valve Spring Valve Washer Locking Pins Plug Body Carbon Steel 1/4” MS Series - Any 1/4” Socket will work with any 1/4” Plug Features • Average Flow: 36 cfm at 90 PSIG (6.2 BAR) inlet 10 PSIG (0.69 BAR) pressure drop Male End Connections • Temperature Range: -40°F to 200°F (-40°C to 93°C) Body Size 1/4” 1/4” SOCKET • Maximum Inlet Pressure: 250 PSIG (17 BAR) PSI 250 5 Body Size 1/4” 1/4” 1/4” BAR 17 40 1.3 1.2 0.9 0.8 12 0.7 0.6 0.5 0.4 0.3 4 0.2 ∆ P-PRESSURE DROP (BAR) 1.0 1/4 "M S ∆ P-PRESSURE DROP (P.S.I.) 1.1 16 0.1 20 30 40 50 60 70 80 90 Q-RATE OF FLOW (SCFM of AIR at 90 PSIG [6.2 BAR] INLET) MS Series 8 Male End Connections 1/8” NPT 1/4” NPT 3/8” NPT SOCKET 45 20 10 Part No. Steel 12 10 14 Female End Connections Q-RATE OF FLOW (DM3/S of AIR) 10 15 20 25 30 35 8 Thread Size 1/4” NPT 3/8” NPT PLUG Operating Pressure Series MS Part No. Steel MSCM22-000 MSCM23-000 Body Size 1/4” 1/4” Part No. Steel MSCF22-000 MSCF23-000 Thread Size 1/4” NPT 3/8” NPT PLUG Body Size 1/4” 1/4” 1/4” Part No. Steel 13 11 15 Female End Connections 1/8” NPT 1/4” NPT 3/8” NPT Hose Stem End Connections SOCKET Body Size 1/4” 1/4” Part No. Steel MSCH22-000 MSCH23-000 Hose I.D. 1/4” 3/8” Part No. Steel 16 17 Hose I.D. 1/4” 3/8” PLUG Body Size 1/4” 1/4” High-Flow Series Industrial Interchange PART DESCRIPTION STANDARD MATERIAL Socket Socket Socket Socket Socket Socket Socket Socket Carbon Steel Carbon Steel Hard Drawn Steel Wire Carbon Steel Carbon Steel Hard Drawn Steel Wire Buna-N Carbon Steel Body Sleeve Sleeve Spring Ends Valve Valve Spring Valve Washer Locking Balls Plug Body Carbon Steel 1/4” High-Flow Series - Any 1/4” Socket will work with any 1/4” Plug Male End Connections Features SOCKET Body Size 1/4” 1/4” Part No. Steel 23102-212 23102-213 Thread Size 1/4” NPT 3/8” NPT PLUG Body Size 1/4” 1/4” 1/4” Part No. Steel 12 10 14 Male End Connections 1/8” NPT 1/4” NPT 3/8” NPT Female End Connections • Average Flow: 1/4” = 38 cfm 3/8” = 72 cfm 1/2” = 85 cfm at 90 PSIG (6.2 BAR) inlet 10 PSIG (0.69 BAR) pressure drop • Temperature Range: -40°F to 200°F (-40°C to 93°C) • Maximum Inlet Pressure: 250 PSIG (17 BAR) Operating Pressure Series High-Flow SOCKET Body Size 1/4” 1/4” The High-Flow Series is a premium automatictype one-way shutoff coupler that delivers high air volume with low pressure drop and features a protective drag collar that minimizes accidental disconnection from snagging. With a steel ball locking mechanism, the High-Flow Series is available in 1/4”, 3/8” and 1/2” capacities and is built to interchange with industrial type plugs (MIL-C-4109). Part No. Steel 23102-200 23102-003 Thread Size 1/4” NPT 3/8” NPT 5 PSI 250 10 BAR 17 Q-RATE OF FLOW (DM3/S of AIR) 15 20 25 30 35 40 45 20 1.3 1.2 8 0.9 0.8 0.7 0.6 0.5 0.4 0.3 4 0.2 ∆ P-PRESSURE DROP (BAR) w 3/8 "H igh -Fl ow 1/2 "H ig hFl ow Female End Connections 1/8” NPT 1/4” NPT 3/8” NPT -Flo Part No. Steel 13 11 15 12 High Body Size 1/4” 1/4” 1/4” 1.0 1/4" PLUG ∆ P-PRESSURE DROP (P.S.I.) 1.1 16 0.1 10 Hose Stem End Connections 20 30 40 50 60 70 80 90 Q-RATE OF FLOW (SCFM of AIR at 90 PSIG [6.2 BAR] INLET) SOCKET Body Size 1/4” 1/4” Part No. Steel 23102-022 23102-024 Hose I.D. 1/4” 3/8” Part No. Steel 16 17 Hose I.D. 1/4” 3/8” PLUG Body Size 1/4” 1/4” High-Flow Series 9 High-Flow Series Industrial Interchange 3/8” High-Flow Series - Any 3/8” Socket will work with any 3/8” Plug 1/2” High-Flow Series - Any 1/2” Socket will work with any 1/2” Plug Male End Connections Male End Connections SOCKET SOCKET Body Size 3/8” 3/8” 3/8” Part No. Steel 23103-012 23103-313 23103-014 Thread Size 1/4” NPT 3/8” NPT 1/2” NPT PLUG Body Size 3/8” 3/8” 3/8” Part No. Steel 23104-014 Thread Size 1/2” NPT PLUG Part No. Steel 40 42 44 Male End Connections 1/4” NPT 3/8” NPT 1/2” NPT Female End Connections Body Size 1/2” 1/2” Part No. Steel 52 54 Male End Connections 3/8” NPT 1/2” NPT Female End Connections SOCKET SOCKET Body Size 3/8” 3/8” 3/8” Body Size 1/2” Part No. Steel 23103-002 23103-300 23103-004 Thread Size 1/4” NPT 3/8” NPT 1/2” NPT Body Size 1/2” Part No. Steel 23104-400 Thread Size 1/2” NPT PLUG PLUG Body Size 3/8” 3/8” Part No. Steel 41 43 Female End Connections 1/4” NPT 3/8” NPT Body Size 1/2” 1/2” Part No. Steel 53 55 Female End Connections 3/8” NPT 1/2” NPT Hose Stem End Connections Hose Stem End Connections SOCKET SOCKET Body Size 3/8” 3/8” Part No. Steel 23103-324 23103-025 Hose I.D. 3/8” 1/2” PLUG Body Size 3/8” 3/8” 10 Body Size 1/2” Part No. Steel 23104-025 Hose I.D. 1/2” Part No. Steel 60 Hose I.D. 1/2” PLUG Part No. Steel 406 408 Hose I.D. 3/8” 1/2” Body Size 1/2” Full-Bore Series Industrial Interchange B Shutoff/Disconnection - Figure 2 When the outer sleeve (A) is moved away from the plug, the valve is rotated to the “OFF” position, shutting off the air supply, and all downstream air is safely vented to atmosphere. The plug is still locked in and cannot be pulled out as long as the front sleeve (B) remains in place. A B Full Disconnection - Figure 3 Pull back on sleeve B and the plug is automatically released. The action is quick and easy, completely eliminating hazardous hose whip and shock. A B • Average Flow: 3/8” = 95 cfm 1/2” = 150 cfm at 90 PSIG (6.2 BAR) inlet 10 PSIG (0.69 BAR) pressure drop Temperature Range: -40°F to 200°F (-40°C to 93°C) Maximum Inlet Pressure: 250 PSIG (17 BAR) • • Operating Pressure Series Full-Bore 10 PSI 250 20 BAR 17 Q-RATE OF FLOW (DM3/S of AIR) 30 40 50 60 70 80 90 10 0.7 0.6 8 6 4 0.5 0.4 0.3 0.2 2 ∆ P-PRESSURE DROP (BAR) A Features e Connection - Figure 1 To connect, simply push the plug into the socket. Actuation of the outer sleeve (A) opens the air passage. As shown here, the socket and the plug are fully engaged and under pressure. The valve — a hollowed nylon ball that rotates in a socket— allows straight-through unimpeded air flow from one end of the connection to the other. When the outer sleeve (A) is nearest the plug, the valve is in the “ON” position. Bor Carbon Steel u ll Plug Body The Full-Bore Series is a premium automatictype one-way shutoff coupler that offers a pressure-relieving feature that fully vents dowstream air, making connection/disconnection fast and easy, and reducing hose whip. The unique straight-through design eliminates restrictive springs and poppet valves, allowing unimpeded air flow. Since two sleeves must be actuated in sequence to bleed off back pressure and release the connector, accidental uncoupling is virtually eliminated. The Full-Bore Series is available in 3/8” and 1/2” capacities. "F Carbon Steel Carbon Steel Hard Drawn Steel Wire Carbon Steel Carbon Steel Hard Drawn Steel Wire Buna-N Carbon Steel Body Sleeve Sleeve Spring Ends Valve Valve Spring Valve Washer Locking Balls 1/2 Socket Socket Socket Socket Socket Socket Socket Socket 3/8" Full Bore STANDARD MATERIAL ∆ P-PRESSURE DROP (P.S.I.) PART DESCRIPTION 0.1 20 40 60 80 100 120 140 160 180 Q-RATE OF FLOW (SCFM of AIR at 90 PSIG [6.2 BAR] INLET) Full-Bore Built-in sleeve valve and unique straight-through air passage for maximum air flow. Series 11 Full-Bore Series Industrial Interchange 3/8” Full-Bore Series - Any 3/8” Socket will work with any 3/8” Plug Male End Connections Male End Connections SOCKET SOCKET Body Size 3/8” 3/8” Part No. Steel 23203-013 23203-014 Thread Size 3/8” NPT 1/2” NPT PLUG Body Size 3/8” 3/8” 3/8” Male End Connections 1/4” NPT 3/8” NPT 1/2” NPT Part No. Steel 23203-300 23203-004 Thread Size 3/8” NPT 1/2” NPT Thread Size 1/2” NPT 3/4” NPT Body Size 1/2” 1/2” Part No. Steel 52 54 Male End Connections 3/8” NPT 1/2” NPT Female End Connections Body Size 1/2” 1/2” Part No. Steel 23204-400 23204-005 Thread Size 1/2” NPT 3/4” NPT PLUG PLUG Body Size 3/8” 3/8” Part No. Steel 23204-014 23204-015 SOCKET SOCKET Body Size 3/8” 3/8” Body Size 1/2” 1/2” PLUG Part No. Steel 40 43 44 Female End Connections Part No. Steel 41 43 Female End Connections 1/4” NPT 3/8” NPT Body Size 1/2” 1/2” Part No. Steel 53 55 Female End Connections 3/8” NPT 1/2” NPT Hose Stem End Connections Hose Stem End Connections SOCKET SOCKET Body Size 3/8” 3/8” Part No. Steel 23203-024 23203-025 Hose I.D. 3/8” 1/2” PLUG Body Size 3/8” 3/8” 12 1/2” Full-Bore Series - Any 1/2” Socket will work with any 1/2” Plug Body Size 1/2” 1/2” Part No. Steel 23204-025 23204-026 Hose I.D. 1/2” 3/4” Part No. Steel 60 Hose I.D. 1/2” PLUG Part No. Steel 406 408 Hose I.D. 3/8” 1/2” Body Size 1/2” Warranty, Pressure Ratings • About Industry Interchanges... It is possible to connect two different manufacturers’ parts together so that they will effect a seal and work properly in a fluid system. Tuthill Coupling Group cannot guarantee the quality, workmanship, dimensions, or tolerances of the other manufacturers’ parts, even though they might be interchangeable. Therefore, whenever mixing parts, the final assembly must always be tested before being put into service. Failure to test could result in a sudden failure of the coupling causing severe personal injury or death. • Couplings do wear out. In order to avoid severe bodily injury or death, couplings must be routinely checked for condition and replaced if necessary. • Over-pressurization could result in a sudden failure of the coupling causing severe bodily injury or death. Be sure to select the proper coupling for your application and use it only within the specified service pressure range. Warranty Pressure Ratings** Every effort has been made to have all photographs and drawings accurately represent the products as they actually were at the time this catalog was printed. Obviously, however, so that we may effectively continue to meet the requirements of our users, changes in some items may have been made during the life of this catalog—which, on occasion, may be made without notice. Since application conditions vary so widely, the pressures listed are intended as a guide only and not a guarantee of performance. Pressure peaks and extreme surge flows may cause a coupling to become inoperative. “All Tuthill Coupling Group products are guaranteed, for a period of 90 days from the date of shipment to a customer, to be free of defects in material and workmanship. Any claimed defect must be reported to Tuthill Coupling Group in writing within the warranty period. This warranty is limited to replacing or repairing, at the Company’s option, f.o.b. the Company’s factory, any part which upon Company inspection is found to be defective. Components purchased by the Company from others are warranted only to the extent of the guarantee or warranty, if any, made to the Company. **NOTE! Pressure ratings listed were determined by testing threaded sockets and plugs. Sockets and plugs with hose stem and hose clamp end connections are designed and recommended for use with shop air line pressure only (150 psig maximum) when used with the appropriate style hose. THE ABOVE WARRANTY COMPRISES THE COMPANY’S SOLE AND ENTIRE WARRANTY OBLIGATION AND LIABILITY IN CONNECTION WITH TUTHILL COUPLING GROUP HANSEN COUPLINGS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. THE COMPANY IN NO EVENT SHALL BE LIABLE FOR INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SALE OR USE OF HANSEN COUPLINGS.” 13 NOTES 14 NOTES 15 H A N S E N P N E U M A T I C QUICK CONNECT COUPLINGS Aro Interchange Industrial Interchange Catalog No. 00-4