WINKELMAN SALES INC.

Transcription

AUTHORIZED HOT AIR TOOLS SALES & SERVICE
TRIAC AT
TRIAC BT
TRIAC S
HOT JET S
WINKELMAN
FLOOR DRIVER
GROOVER
For Welding of
Curves, Waves &
Circles
1850 SENECA STREET
BUFFALO, NEW YORK USA 14210
1-800-929-4326
1-716-824-1403
fax: 1-716-824-0142 email: [email protected]
Internet: www.winkelman-sales.com
Prices Subject to Change
Good thru November 3rd to December 29th 2012
NEW
WWW.WINKELMAN-SALES.COM
800-929-4326 / 716-824-1403
FAX: 716-824-0142
EMAIL: [email protected]
BASIC FLOOR WELDERS KITS
Choose Your Welder
2012
Year End
Special
WDD 606A
$ 946
WDD 601
$ 762
TRIAC S
HOT JET S
120V 465W
Includes WDD-31 nozzle
120V 1600W
includes
WDD-31A nozzle
NEW
TRIAC AT
120V 1600W
DIGITAL READ OUT
Includes WDD 31A
TRIAC BT
120V 1550W
Includes
WDD 31A nozzle
WDD 505P
$638
WDD 602
$802
Blower speed control
DIGITAL Temp control Fº
EACH KIT ABOVE INCLUDES
THE ACCESSORIES BELOW
WINKELMAN SALES will label your name
on both the tools and tool boxes.
For EASY JOB SITE IDENTIFICATION
WDD 721
4MM ROUND
SPEED NOZZLE
WDD 758 PULL GROOVER
Pack of 10 blades included
WDD 722
5MM ROUND
SPEED NOZZLE
WDD 703
DIAMOND SHARPENING PAD
WDD 18
SPATULA KNIFE
WDD 748
SPECIAL FEED ROLLER
WDD 630
Trim Plate Knife
(First CUT of the Weld Rod)
TOOL BOX
2
WDD 800
TOOL
REST
with
TRAY
800-929-4326 / 716-824-1403
FAX: 716-824-0142
PROFESSIONAL FLOOR WELDERS KITS
2012 Year End Special
Choose Your Welder
WDD 619
$ 3029
WDD 617
$ 2845
HOT JET S
TRIAC S
120V 465W
Includes WDD-31 nozzle
120V 1600W
Includes WDD-31A nozzle
NEW
TRIAC AT
120V 1600W
DIGITAL READ OUT
Includes WDD 31A
WDD 618
$2885
TRIAC BT
WDD 515P
$2724
120V 1550W
Includes
WDD 31A nozzle
Blower speed control
DIGITAL Temp control Fº
EACH KIT ABOVE INCLUDES THE ACCESSORIES BELOW
WINKELMAN SALES will label your
name on both the tools and tool boxes.
For EASY JOB SITE IDENTIFICATION
WDD 721
4MM ROUND
SPEED NOZZLE
WDD 758 PULL GROOVER and Blades
WDD 722
5MM ROUND
SPEED NOZZLE
WDD S65
CLASSIC
NOZZLE 4MM
WDD 27B
5.7MM TRIANGULAR
SPEED NOZZLE
GROOVER 120V
WDD 757
STICK GROOVER
WDD 630
Trim Plate Knife
(First CUT of the Weld Rod)
WDD 703
WDD 18
SPATULA KNIFE
WDD 984 HOT CUTTER TOOL
WDD 748
SPECIAL FEED ROLLER
WDD 15
PUSH GROOVER
WDD 18C
CURVED TIP SPATULA
WDD 800
TOOL
REST
with
TRAY
WDD 753
TEFLON
REPAIR
PAD
TOOL BOXES
1 for the Welder
1 for the Groover
3
TRIAC AT
$ 557
800-929-4326 / 716-824-1403
FAX: 716-824-0142

Everything easily: Intuitive handling with proven «e-Drive» operating unit.

Everything in view: Clearly visible information on the large «e-Drive» display.

Everything automatically: The set temperature reaches its level automatically, voltage fluctuations are compensated.

Everything under control: The temperature measurement probe guarantees a precise temperature.

Everything flexible: The air volume can be adjusted independently.
DIGITAL CONTROLS:
Air Temp
Air Flow
TRIAC BT
$ 393
TRIAC S
$ 701
$ 517
HOT JET S
800-929-4326 / 716-824-1403
FAX: 716-824-0142
DO IT YOUR SELF KIT WDD 708
SONORA
Heat Gun 120V
$ 370.00
Includes
Reduction nozzle
Speed Welding Nozzle
clean out tool wire brush
Pull Groover & Blades
Trim Plate Knife
Spatula Knife
Carrying case
Plus 3 forming nozzles
Welders Used in Other Industries
Rigid sheet welding
Industrial Tank welding
Roof Membrane welding
Automotive Bumper
and Trim welding
Truck Cover welding
Banner welding
Awning / Tarp welding
5
USA
716-824-1403 / fax 716-824-0142
SPEED NOZZLES AND ACCESSORIES
ALL NOZZLES COME WITH A CLEAN OUT TOOL / WIRE BRUSH
$48
$58
$48
All speed nozzles fit on this nozzle
WDD 31A
WDD31AR
WDD 31
STANDARD NOZZLE (PENCIL TIP) TRIAC S
REINFORCED STANDARD NOZZLE TRIAC S
STANDARD NOZZLE HOT JET S
#106.982 6 Inch long nozzle for TRIAC S - for getting into coving area’s (can be curved for an easier fit in the cove)
$46.00 WDD 3MM ROUND SPEED NOZZLE
$50.00 WDD696
6MM ROUND SPEED NOZZLE (PROTECT-ALL)
Narrow preheat nozzle
$46.00
WDD105.431
$46.00
WDD 4MM N (105.432) 4MM ROUND NARROW PREHEAT SPEED NOZZLE
$46.00
WDD 5MM N (105.433) 5MM ROUND NARROW PREHEAT SPEED NOZZLE
$46.00
$46.00
$46.00
3MM ROUND NARROW PREHEAT SPEED NOZZLE
WDD721
4MM ROUND SPEED NOZZLE WITH
CURVED TIP FOR COVING
WDD722
5MM ROUND SPEED NOZZLE WITH
CURVED TIP FOR COVING
WDD27BN 5.7MM TRIANGULAR SPEED NOZZLE
FOR ARMSTRONG MEDINTECH TANDEM SYSTEM
HALF ROUND WELD ROD
NARROW PRE HEAT NOZZLE
$105.00
WDD589
$ 107.00
WDD 695
4MM ROUND ROLLER SPEED TIP (BRASS WHEEL)
also works with the ARMSTRONG MEDINTECH TANDEM SYSTEM
$40.00 WDD S65
$35.00
WDD648
$ 1.00 WDD633
$7.00 WDD731
$7.00 WDD737
$7.00 WDD738
6
NEW
OVAL
FEED
OSCODA NOZZLE
TRIANGULAR
CLASSIC NOZZLE (ARMSTRONG - TARKETT #99)
FOR URETHANE FINISH FLOORING
TACKING & FLAT SMOOTHING TIP
WINKELMAN RAM ROD CLEAN OUT TOOL
CLEAN OUT BRUSH 4MM ROUND
CLEAN OUT BRUSH 5MM ROUND
BRASS CLEAN OUT BRUSH (needs handle WDD 745H)
WDD 645 SLIM TRIM KNIFE
WITH SPECIAL DIAMOND SHARPENING PAD
GREAT ON RAISED KNOB AND ANTI SLIP FLOORS
( Saves your Spatula Knife from the Anti Slip Floor)
WDD 18
SPATULA KNIFE
106.969
LEISTER SPATULA
WDD 18M MOZART TRIMMING KNIFE
WDD 18MB
Blades 5 Pack
WDD 18MC LEATHER COVER FOR MOZART
Holds the knife and a 5 pack of blades
new
WDD 18B
$50.00
$75.00
$25.00
$11.00
CURVED TIP SPATULA KNIFE
$69.00
WDD 701
LEATHER COVER FOR SPATULA
$11.00
WDD 703
$7.00
WDD 743 BLOCK PLANE
WDD 743B
WDD 630
$75
(Both the rod trim down and the FINAL CUT)
Blade with 2 sharp sides
Trim Plate Knife
(use this FOR THE FIRST TRIMMING OF THE WELD ROD)
$ 15
$12.00
WDD 629
PLASTIC TRIM PLATE
$1.00
WDD 628
METAL TRIM PLATE
$13.00
WDD 758
WDD 758S
WDD 758B
WDD 758BS
NEW
$37.00
$49.00
CUTS IN ONE PASS)
PULL GROOVER
FAX: 716-824-01
$20.00
SPATULA KNIFE BENT AT HANDLE
WDD 18C
(
800-929-4326 / 716-824-1403
BENT ARM
PULL GROOVER STRAIGHT ARM
BLADES FOR WDD 758 3.5MM WIDE (10 PACK)
BLADES FOR WDD 758 2.5MM WIDE (10 PACK)
WDD 756 ADJUSTABLE GROOVER
WDD 756B J TYPE BLADES 10 PACK
WDD 757
STICK GROOVER
WDD 757B BLADE FOR WDD 757
WDD 15 HAND GROOVER (PUSH - PULL)
WDD 16 BLADES for WDD 15 (10 PACK)
$25.00
$25.00
$26.00
$30.00
$60.00
$40.00
$41.00
$13.00
$34.00
$18.00
NEWLY DESIGNED
WDD 748
$30.00
FEED ROLLER TEFLON FOR ROUND & HALF ROUND ROD
1/4" ROUNDED TEFLON ROLLER ON THE OTHER END
WDD 19
FEED ROLLER (BRASS WHEEL)
$21.00
7
800-929-4326 / 716-824-1403
FAX: 716-824-0142
WHEELED SUPER GROOVER
WDD655
NEW NARROWER BASE
$240.00
2.5” WIDE & 8” LONG
NOW WITH TWO CUTTING BLADE OPTIONS
THE U TYPE BLADE
FOR VINYL FLOORS
ADJUSTABLE
CUTTING
DEPTH
D NE
ES W
IG
N
THE BAR TYPE BLADE
FOR ANTI SLIP FLOORS
FRONT KNIFE GUIDE WHEEL
REAR GUIDE WHEEL
BALL BEARING WHEELS
NARROW DESIGN FOR CLOSE TO WALL SEAMS
NEW WAVE GROOVER
WDD 654
$380
CURVES
NO PROBLEM
STRAIGHT RUNS
RIGHT TO THE WALL
Uses standard U shape blades (WDD 758B)
WDD 654H
SPECIAL ATTACHMENT
To PREHEAT
THE SEAM
BEFORE GROOVING
Fits the TRIAC S & TRIAC BT
Flip the holder for the HOT JET S
$ 30.00
8
Straight Runs
Front guide wheel and
middle guide wheel.
The back blade will adjust
down to go backwards to finish
to the wall
800-929-4326 / 716-824-1403
FAX: 716-824-0142
GROOVER
108.395
$1774.00
INCLUDES TOOL BOX
TECHNICAL DATA
CUTTING SPEEDS
NOISE LEVEL
GROOVING DEPTH
WEIGHT
120V 350W 50/60 Hz
LEVEL 1 14500 rpm
LEVEL 2 18500 rpm
84 Db
0—4MM ADJUSTABLE
14.7 lbs
SPECIAL FEATURES:
BLOWER ASSISTED DUST BAG FOR
A DUST FREE WORK AREA
GROOVING AS CLOSE AS 1/2” FROM THE WALL
LEISTER TOOL BOX
126.448
SPRING LOADED DUAL HANDLE SYSTEM WITH
A MAGNETIC ASSIST FOR A SMOOTH GROOVE
ADJUSTABLE FRONT GUIDE WHEEL
REPLACEMENT BLADES FOR THE GROOVER
WDD 570
3.5MM WIDE Trapezium
CARBIDE BLADE
$178.00
WDD 573
WDD 762
CARBIDE BLADE
$184.00
WDD 578 2.8MM WIDE Rounded
CARBIDE BLADE
$186.00
3.5MM WIDE
DIAMOND COATED BLADE
$199.00
NEW
Roun
d
Blad ed
es
WDD 579 3.5MM WIDE Rounded
CARBIDE BLADE $185.00
WDD 574
CARBIDE BLADE
$180.00
SHARPENING OR RETOOTHING CAN BE DONE ON THESE BLADES
FOR ANTI SLIP FLOORS
9
800-929-4326 / 716-824-1403 fax 716-824-0142
Email: [email protected] www.winkelman-sales.com
___________________________________________________________________________________________________
The new U-range of LEISTER automatic hot-air welding machines.
UNIFLOOR
LEISTER AUTOMATIC
FLOOR WELDING
WDD 710 $4200 COMPLETE UNIT
BASE UNIT
DEREELER
TROLLEY
Simple and comfortable operation GREAT for LONG STRAIGHT RUNS
WINKELMAN FLOOR DRIVER
WDD 709
Semi Automatic Floor Welding
For WAVES, CURVES and CIRCLES
$2929.00 Ready To Weld
Winkelman Design and Leister Quality Tools
Leister TRIAC BT
Leister Triac Drive
Winkelman Design Set Up
and nozzles
( will not work with
TURBO Nozzles)
The floor is grooved and
ready to be welded.
Speed - Triac Drive
Heat - Triac BT
Pressure - Design Set Up
You provide the pressure
on the Drive Wheel and
Guide the Floor Driver
along the Curved Seam
10
Lighted Welding Area
Welder Adjustable to
fit the many types of
Winkelman nozzles
Unit at rest on the
kick stand
N
800-929-4326 / 716-824-1403
FAX: 716-824-0142
BULLET FINISHING TIPS
NOW with Teflon Coated Tips
EW
Slip on to the Standard Nozzle
WDD656T $ 19.00
( QUARTER INCH )
WDD657T $ 19.00
(HALF INCH)
WDD658T $ 19.00 (THREE EIGHTS INCH)
CLEAN
THE TIP
WITH A
RAG
WDD660T $ 50 SET ALL THREE
NEW !!!
137.855
LEISTER—CUTTER
With spare blades
$43.00
WDD 637
BLUE MARLIN KNIFE
$ 20.00
WDD 800
$ 16.00
TOOL REST WITH TRAY
(Helps keep the DIRT OUT of the welder)
(Welders on the floor vacuum in the dirt.)
WDD 599
STRAIGHT EDGE GUIDE
For FAST & EASY HAND
GROOVING
Guide Wheels Keep You
Centered on the Seam
Then let you Roll it Up
for the next section.
6” x 42” Straight Edge Guide
With Guide Wheels IN THE SEAM
$ 70.00
WDD 753 TEFLON REPAIR PAD
$7.00
WDD 715
Hot Melt Tool
$ 47.00
WDD 715R
REPLACEMENT
GREEN TEFLON
BLADE
11/16” WIDE
$17.50
800-929-4326 / 716-824-1403
FAX: 716-824-0142
WDD 715OC
REPLACEMENT
GREEN TEFLON
BLADE FOR
OUTSIDE
CORNERS
$17.50
USES ARE:
SMOOTH OFF
INSIDE & OUTSIDE
CORNERS
OR
SCRATCHES
HEAT THE AREA WITH
YOUR TRIAC AND
PRESS IN THE PAD.
LET IT COOL AND
PEEL IT OFF.
WDD 745H
WDD 745N
REPLACEMENT TRIMMING
BLADES WITH LOCKING
NUTS
( 4 TRIMMING BLADES)
$16.00
TRIM BLADE
HANDLE
With
Storage in Handle
$ 8.00
WDD 745
$ 15.00
TRIMMING BLADES 4 PACK
WDD 984D
WDD 984C
WDD 984E
WDD 984F
LARGE ROUND
SMALL ROUND
POINTED TIP
FLAT TIP
WDD 984 HOT CUTTER TOOL
WITH LOCKING NUTS FOR THE BLADES
$77.00
WDD 715OC
GREEN TEFLON
BLADE FOR OUTSIDE
CORNERS
NOW
IS INCLUDED
IN THIS KIT
12

WINKELMAN SALES INC.

Transcription

Similar documents

PI May 2011 - Petroleum Technical Services LLC.

Foaming Tool Product Sales Sheet

Fan-Jet® - Bowsmith

pelletizer knives - American Cutting Edge

Super Soaker Monster XL (2000)

Paper Lanterns

Brochure - High Country Fabrication

Untitled - Bron

Ad for user Orgill (KELSEYVILLE LUMBER)