BRAKE LINE ACCESSORIES Banjo Bolts

BRAKE LINE ACCESSORIES
Banjo Bolts
To order Banjo Bolts in color: Replace “xx” in part numbers with color code (e.g. 20-00001-xx would be 20-00001-13 for chrome)
Colors
Silver
Gold
Chrome
Blue
Black
Purple
Red
Green
Titanium
Stainless Steel
Code
11
12
13
14
15
16
17
18
19
SS
M10x1.00
74
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
Material
Part #
Banjo bolt
Aluminum anodized
To order Banjo Bolts in color see chart.
20-00001-xx
Retail
6.50
Banjo bolt
Aluminum chrome
20-00001-13
7.20
Banjo bolt
Stainless steel
20-00001-SS
8.50
Double Banjo Bolt
Aluminum anodized
To order Double Banjo Bolts in color see chart.
20-00101-xx
7.80
Double Banjo Bolt
Aluminum chrome
20-00101-13
8.30
Double Banjo Bolt
Stainless steel
20-00101-SS
9.90
Racing M10x1.00
Material
Part #
Retail
Banjo bolt
M10x1.0, aluminum anodized silver,
pre-drilled with holes for safety wires
20-00021-11
11.90
Banjo bolt
M10x1.0, aluminum anodized black,
pre-drilled with holes for safety wires
20-00021-15
11.90
Double Banjo Bolt
M10x1.0, aluminum anodized silver,
pre-drilled with holes for safety wires
20-00121-11
13.90
Double Banjo Bolt
M10x1.0, aluminum anodized black,
pre-drilled with holes for safety wires
20-00121-15
13.90
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
75
BRAKE LINE ACCESSORIES
BRAKE LINE ACCESSORIES
Banjo Bolts
Banjo Bolts
Material
Part #
Retail
Racing M10x1.25
Bleeder Banjo Bolt
Aluminum silver anodized with ss bleeder
nipple and rubber dust cap
127-03524-11
25.95
Bleeder Banjo Bolt
Aluminum black anodized with ss bleeder
nipple and rubber dust cap
127-03524-15
Material
Part #
Banjo bolt
Aluminum anodized
To order Banjo Bolts in color see chart.
20-00002-xx
6.50
Banjo bolt
Aluminum chrome
20-00002-13
7.20
Banjo bolt
Stainless steel
20-00002-SS
8.50
M10x 1.00 Bleeder Banjo Bolt
M10x1.25
Double Banjo Bolt
Double Banjo Bolt
Aluminum chrome
20-00102-xx
20-00102-13
Part #
Retail
Double Banjo Bolt
M10x1.25, aluminum anodized silver,
pre-drilled with holes for safety wires
20-00122-11
13.90
25.95
Double Banjo Bolt
M10x1.25, aluminum anodized black,
pre-drilled with holes for safety wires
20-00122-15
13.90
Retail
M10x 1.25 Bleeder Banjo Bolt
7.80
8.30
Double Banjo Bolt
Stainless steel
20-00102-SS
Racing M10x1.25
Material
Part #
Retail
M10x1.25, aluminum anodized silver,
pre-drilled with holes for safety wires
20-00022-11
11.90
M10x1.25, aluminum anodized black,
pre-drilled with holes for safety wires
20-00022-15
Banjo bolt
Banjo bolt
76
Aluminum anodized
To order Double Banjo Bolts in color see chart.
Material
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
9.90
11.90
Material
Part #
Retail
Bleeder Banjo Bolt
Aluminum silver anodized with ss bleeder
nipple and rubber dust cap
127-02695-11
25.95
Bleeder Banjo Bolt
Aluminum black anodized with ss bleeder
nipple and rubber dust cap
127-02695-15
25.95
Retail
3/8”-24UNF
Material
Part #
Banjo bolt
Aluminum anodized
20-00003-xx
6.50
Banjo bolt
Aluminum chrome
20-00003-13
7.20
Banjo bolt
Stainless steel
20-00003-SS
8.50
Double Banjo Bolt
Aluminum anodized
20-00103-xx
7.80
Double Banjo Bolt
Aluminum chrome
20-00103-13
8.30
Double Banjo Bolt
Stainless steel
20-00103-SS
9.90
7/16”-24UNS
Material
Part #
Banjo bolt
Aluminum chrome
20-00004-13
7.40
Banjo bolt
Aluminum anodized, black
20-00004-11
6.50
M12x1.00
Material
Part #
Retail
Banjo bolt
Stainless steel
20-00006-SS
12.95
M12x1.50
Material
Part #
Retail
Banjo bolt
Aluminum chrome
20-00005-13
11.95
Banjo bolt
Aluminum anodized, black
20-00005-15
10.95
Retail
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
77
BRAKE LINE ACCESSORIES
BRAKE LINE ACCESSORIES
Brake Line Accessories
Brake Line Accessories
Description
Material
Part #
Crush washer
Aluminum, ID 6mm
09-12020-00
0.35
Crush washer
Aluminum, ID 8mm
09-29000-00
0.35
Crush washer
Aluminum, ID 10.2mm (3/8”)
09-29001-00
0.35
Crush washer
Copper, ID 10.2mm (3/8”)
09-29001-CO
0.95
Crush washer
Aluminum, ID 11.5mm (7/16”)
09-29002-00
0.35
Crush washer
Aluminum, ID 12mm
09-29003-00
0.35
20-00060-11
29.95
20-00061-11
29.95
20-00063-11
34.95
89.95
Manifold 2-way
15
Description
Material
Part #
Retail
HD- Manifold
H-D 3 way manifold (#2), chromed, 2 x 3/8”-24 UNF
(AN3, Spiegler fitting 633), 1 x 1/8" NPT for
H-D brake light switch
20-00065-13
49.95
Banjo bolt
alu., M10x 1,( use with P.N. SB1010S or 20-01021-52 ),
silver
20-00011-11
12.95
Double Banjo bolt
alu., M10x 1, ( use with P.N. SB1010S or 20-01021-52 ),
silver
20-00111-11
13.95
Double Banjo bolt
alu., M10x1.25, ( use with P.N. SB1010S or 20-01021-52 ),
silver
20-00112-11
13.95
Brake light switch
1/8 NPT
20-01001-52
16.95
Brake light switch
M10x1.00, 14mm hex, comes with 1 crush washer and
2 connectors
20-01021-52
16.95
Brake light switch
M10x1.00, single banjo bolt, 14mm hex, comes with
2 crush washers and 2 connectors
20-01011-52
20.95
Brake light switch
M10x1.25, single banjo bolt, 14mm hex, comes with
2 crush washers and 2 connectors
20-01012-52
20.95
Brake light switch
UNF 3/8”, single banjo bolt, 14mm hex, comes with
2 crush washers and 2 connectors
20-01013-52
20.95
Brake light switch
M10x1.00, double banjo bolt, 14mm hex, comes with
2 crush washers and 2 connectors
20-01111-52
23.95
Brake light switch
M10x1.25, double banjo bolt, 14mm hex, comes with
2 crush washers and 2 connectors
20-01112-52
23.95
M10x1.00
35
alu., 90°, M10x 1, silver
Retail
alu., 180°, M10x 1, silver
15
M10x1.00
alu., M10x 1, silver
M10x1.00
15
M10x1.00
20-00070-13
Olive Manifold
Brass, Olive 120°, ID 8.0mm
24-200850
8
HD- Manifold
Brake light switches
1.95
120°
2 way manifold for Honda VTX1800,
M10x1.25 ports, chromed
120°
Manifold 2-4way
HD- Manifold
78
35
M10x1.00
Manifold, 3-way
M10x1.00
Manifold 2-way
M10x1.00
(2:1)
alu chromed, for 3 line HD front line kits, 2 x 3/8” -24 UNF
H-D 3 way manifold (#3), chromed, 2 x 3/8”-24 UNF
(AN3, Spiegler fitting 633), 1 x 1/8" NPT for
H-D brake light switch
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
20-00069-13
20-00064-13
79.95
14.95
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
79
BRAKE LINE ACCESSORIES
QUICK DISCONNECT
Brake Line Accessories
Description
Material
Part #
Retail
Item
Description
Part#
Dual
Brake Line
Clamp
Dual Clamp for brake lines, aluminum
20-00081-11
14.95
Bleeder Plug
Dry Brake bleeder plug with M10x1.00 cap,
incl. 1 copper seal
SPH03 Bleeder
189.00
Tab locator
Tab locator with rubber grommet, stainless steel bracket
20-00085-SS
7.95
Socket for Bleeder Plug
Socket with 3/8-24 JIC end fitting, connects to
Bleeder Plug, threaded locking
SPH03 Bleeder
Socket
229.00
Dry brake Plug
Brake line dry brake / quick disconnect, UNF 3/8-24” JIC,
plug, fits Spiegler fitting 633
SPH03 Plug
139.00
Dry brake Socket
Brake line dry brake / quick disconnect, UNF 3/8-24” JIC,
socket, fits Spiegler fitting 633
SPH03 Socket
157.00
Dry brake Banjo
SPH03.DB
Brake line dry brake / quick disconnect, Socket,
direct bolt on with 20 degree angled banjo fitting 10mm,
Needs longer banjo bolt!!!
Clamp
80
Quick Disconnect
Rubber cushioned clamp for brake lines
20-00086-11
0.95
Rubber grommet
Rubber Grommet for brake lines, L 0.827 (21mm),
OD 0.827 (21mm)
MR-250001
1.95
Rubber grommet
Rubber Grommet for brake line locator tab
MR-250003
1.80
Rubber grommet
Rubber Grommet for brake lines
MR-250004
1.25
Rubber cap
Cap-Bleeder Screw, black
MR-250005
0.49
Rubber grommet
Rubber grommet ID 7.2 x L 18
MR-250006
0.79
Reservoir hose
6mm / 1/4” ID, black Norprene, Priced per inch
09-40012-75
0.95
Reservoir hose
8mm / 5/16” ID, black Norprene, Priced per inch
09-40013-75
1.20
Blue plastic clamps
to adjust/align brake line fittings
20-10000-99
0.35
Fitting replacement
Priced per fitting replaced
02-00XXX-XX
22.00
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
Retail
209.00
The flush face design ensures that no air can get into
the system when connecting as well as no leakage
when disconnecting.
This eliminates the need to purge the system and
permits the use of pre-filled brake lines with calipers or
master cylinders attached.
Don’t lose any time in the pits during an Endurance
race when you have to change your master cylinder or
calipers in case of a crash or even a pad change!
Please call before ordering.
Tell us the number of dry brakes needed and where they
should be located. Brake lines will be custom made to fit
your application.
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
81
MITYVAC BRAKE BLEEDING KITS
MOTUL BRAKE FLUID
Motul Brake Fluid
Mityvac Brake Bleeding Kits
Motul Brake Fluid DOT 5.1
For use in DOT 3 and DOT 4 brake systems. Non-silicone based, long life and 100% synthetic,
DOT 5.1 BRAKE FLUID conforms to the highest standards in brake fluid performance.
DOT 5.1 is specially designed for Anti-Locking Brake Systems (ABS). With a high dry boiling
point of 270°C (522°F) and a high wet boiling point of 185°C (365°F), DOT 5.1 delivers the
best brake performance and mixes with DOT 3 and DOT 4.
SAE/DOT standard: FMVSS116, DOT 3, DOT 4, SAE J1703 0.5 Liter (1.05 US pint)
MV8000
Specifically made for easy, one-person operation
The New MV8000 is designed with a new ergonomic grip and comes
with all accessories necessary to perform one-person brake bleeding on
automobiles, motorcycles, ATVs, snowmobiles, etc. Also works great for
siphoning or transferring fluids from tanks and reservoirs.
Kit includes:
Motul Factory Line RBF 600 Brake Fluid
For use in DOT 3 and DOT 4 brake systems.100% synthetic, RBF 600 FACTORY LINE is a
polyglycol-based brake fluid exclusively designed for races.
Developed to resist high temperatures and wet-weather conditions, RBF 600 has a high dry
boiling point of 312°C (594°F) and a wet boiling point of 205°C (401°F). This ensures effective
braking under extreme racing or rainy conditions. Couple this with its outstanding anti-vapor
lock performance, RBF 600 has become a well-trusted brake fluid in many races. RBF 600 mixes
with DOT 3 and DOT brake fluids.
Filled in a Nitrogen gas environment and therefore eliminating contamination from absorption
of moisture during storage. Brake fluids are hygroscopic and they will absorb water from air.
SAE/DOT standard: FMVSS116, DOT 4, SAE J1703 0.5 Liter (1.05 US pint)
• Selectline hand vacuum/pressure pump (Model No. MV8000)
• 4.5 oz. (135 ml) fluid reservoir bottle with fluid transfer and storage lids
• (3) Tapered adapters for connecting to tubing from 0.09" to 0.2" ID
(2.3 mm to 5 mm ID)
• (2) Universal bleed screw adapters
• 5/32" ID x 1/4" (4 mm ID x 6.4 mm) tubing adapter
• 1/4" ID x 1 1/2" long (6.4 mm ID x 40 mm long) connection tube
• 5/32" ID x 3" long (4 mm ID x 75 mm long) connection tube
• 1/4" ID x 3 5/8" long (6.4 mm ID x 90 mm long) connection tube
• 1/4" ID x 24" long (6.4 mm ID x 610 mm long) connection tube
• User manual (English/French/Spanish/German)
Retail 41.95
MV6870
Description
Part #
Retail
DOT 5.1 Brake Fluid
M5105
10.80
RBF 600 Brake Fluid
M60005
21.60
Compact Design - air compressor required
The compressed-air-operated MV6870 offers high quality and performance
in a robust compact design. It features a 1.3-quart reservoir and powerful
compressed-air-operated venturi that quickly draws out fluid and air from
hydraulic brake and clutch systems. With the MV6870 one person can
perform quick, clean vacuum brake and clutch bleeding.
This affordable tool is a perfect fit for everyone who does brake or clutch
bleeding jobs on a regular basis.
Kit includes:
•
•
•
•
•
•
•
•
•
•
Brake bleeder
Compact 1.3-quart (1.2 liter) capacity reservoir
Comfortable lever-action throttle with lock-on latch
Durable, molded composite handle can take heavy abuse and has
minimum number of parts to wear or brake
Automatic shutoff prevents overfill
Integrated hanging hook doubles as a hose wrap for convenient storage
4' (1.2m) long bleed hose with molded support
Universal bleed screw adapter conforms to most common bleed
screw sizes
Integrated muffler insures quiet operation
Includes two replacement bleed screw adapters
Retail 119.00
82
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
83
BRAKE FLUID RESERVOIRS
MITYVAC BRAKE BLEEDING KITS
Mityvac Brake Bleeding Kits
MV6830
ABM Brake Fluid Reservoirs and Accessories
Professional Grade - air compressor required
ABM - Simple, Classy
· Billet aluminum
· 90º plastic nipple
· Mounting bracket and hose
· Fluid level window
· Available in black, silver or gold
The compressed-air-operated MV6830 offers professional grade brake
and clutch bleeding performance. This compact yet powerful unit bleeds
up to 2 quarts (1.9 liters) per minute, and its simple operation allows
clean, quick bleeding of brake and clutch lines. Kit includes an advanced
selection of accessories that ensure maximum convenience and
performance for greater productivity.
Kit includes:
Description
Part #
Retail
•
•
•
•
•
•
•
•
•
Bracket for brake fluid reservoir,
fits into aluminum handlebar (ID 14mm)
Z154-T22
15.95
ABM Brake fluid reservoir, 15ml, billet aluminum with side gauge, 90 degree hose nipple, brake
fluid hose and mounting bracket, silver anodized
423-10328-11
79.95
ABM Brake fluid reservoir, 15ml, billet aluminum with side gauge, 90 degree hose nipple, brake
fluid hose and mounting bracket, gold anodized
423-10328-12
79.95
ABM Brake fluid reservoir, 15ml, billet aluminum with side gauge, 90 degree hose nipple, brake
fluid hose and mounting bracket, black anodized
423-10328-15
79.95
ABM bracket for brake fluid reservoir, stainless steel
423-45474-15
12.95
Brake bleeder
6' (1.8 m) long bleed hose assembly
4' (1.2 m) long fluid evacuation hose
Molded base with screws for bench mounting
Automatic fluid refill kit
1/4" ID x 1 1/2" long (6.4 mm ID x 40 mm long) connection tube
Hanging hook
3 Universal bleed screw adapters
User manual (English/French/Spanish/German)
Retail 199.00
LSL Brake Fluid Reservoirs and Accessories
MVA7607
Locking Hose Clamp - designed to access hard-to-reach hoses
LSL - Outstanding Design
· CNC - Billet aluminum
· 90º stainless steel nipple
· Mounting bracket included
· Fluid level window
· TÜV approved
· Black or silver anodized
The new Mityvac MVA7607 Locking Hose Clamp is ideal for securely
clamping flexible hoses when performing automotive diagnostics or
repairs. It has an overall length of 8” (200 mm), with angled jaws for
accessing hard-to-reach hoses virtually anywhere on a vehicle.
The jaws extend to securely clamp hoses up to 1 ¼” (30 mm) in diameter,
and can apply up to 50 lbs (23 kgs) of force.
Retail 17.95
84
Ph. (937) 291-1735 Click hyperlink to visit: www.spieglerusa.com
36ml
20ml
20ml
Description
Part #
Retail
LSL Brake fluid reservoir 36ml, billet aluminum with glass side gauge, mounting bracket and
stainless steel hose nipple, silver anodized. TUEV tested and certified
Z244BB01SI
109.95
LSLBrake fluid reservoir 36ml, billet aluminum with glass side gauge, mounting bracket and
stainless steel hose nipple, black anodized. TUEV tested and certified
Z244BB01BK
109.95
Bracket forLSL brake fluid reservoir, fits Honda and KTM bikes
Z243-H82
10.49
LSL Clutch or brake fluid reservoir 20ml, billet aluminum with glass side gauge, mounting
bracket and stainless steel hose nipple, silver anodized. TUEV tested and certified
Z244BT01SI
99.95
LSL Clutch or brake fluid reservoir 20ml, billet aluminum with glass side gauge, mounting
bracket and stainless steel hose nipple, black anodized. TUEV tested and certified
Z244BT01BK
99.95
LSL Clutch or brake fluid reservoir bracket / rear brake reservoir , side mount
243-BT1
9.95
Reservioir hose, 6mm / 1/4” ID, Norprene, Priced per inch
09-40012-75
0.95
Reservioir hose, 8mm / 5/16” ID, Norprene, Priced per inch
09-40013-75
1.20
Click hyperlink to visit: www.spieglerusa.com Ph. (937) 291-1735
85