mat.works - Robert Kirk | Flooring Distributor

Transcription

mat.works
Flooring Solutions
ENTRANCE MATTING l SAFETY MATTING l BESPOKE MATTING
HEALTH AND
SAFETY SPECIALIST
EXPERIENCED
TECHNICAL SUPPORT
CUSTOMER
SERVICE EXCELLENCE
2
CONTENTS
QUALITY
CONTRACT PRODUCTS
PAGE
PRODUCT NAME
pg 4
pg5
pg6
pg8
pg10
pg12
pg13
pg14
pg15
pg16
pg17
pg18
pg20
pg21
pg22
pg23
pg24
pg25
pg26
pg28
pg29
pg30
pg31
pg32
pg33
pg34
pg35
pg36
pg38
pg40
pg41
pg45
pg46
pg47
pg48
pg49
pg50
pg51
pg52
pg53
pg54
pg58
pg59
The 4.5 Meters Rule - Effective Entrance Design
Integrated Solutions
PRIMARY ENTRANCE MATTING PRODUCTS
Frameworks
Ecoline - Tyre Tile & Eco Gridmaster
271 CITI™ 10mm Backed
274 CITI™ 10mm Unbacked
273 CITI™ 16mm Backed
Smartscraper
Oct-O-Flex / Oct-O-Mat
Case Study
SECONDARY ENTRANCE MATTING PRODUCTS
Platoon Premier
Platoon Absorber
FB Rib : Double Rib
FB Rib
Coir
Case Studies
TERTIARY ENTRANCE MATTING PRODUCTS
Aqua Absorber
Aqua Barrier
Aqua Works
Aqua Turf
Aqua Mat
599 Oct-O-Flex™ Bevelled
265 Wayfarer® 10mm Backed
266 Wayfarer® 10mm Unacked
Design Mat
ANTI-SLIP RUBBER MATTING
Rib 'N' Roll
ERGONOMIC ANTI-FATIGUE & SAFETY ENTRANCE MATTING
Cushion Ease
Cushion Ease Solid
Cushion Trax
Marble Sof-Tile
Softone
Airug
Sof-Tred
Sanitiop & Sanitop Deluxe
Diamond Stat
Chemical Resistance Guide
Cleaning & Maintenance
Accessories
3
ENTRANCES
THE 4.5 METERS RULE EFFECTIVE ENTRANCE DESIGN
RECEPTION AREA
/ STAIRCASES
LIFT LOBBIES
A simple rule-of-thumb to design effective matting
applications which reduce the amount of dirt and
moisture transferred into a building.
• 4.5 metres of matting allows each foot to make
contact with matting at least 3 times.
Entrances are the focal point of dirt and moisture
ingress. Most commercial areas will receive heavy
footfall and require protection from the outside
elements. By installing effective matting you
increase the life expectancy and reduce the
maintenance costs of the adjacent floorcoverings.
Combinations of primary and secondary products in
these areas can provide a stylish and highly effective
solution to remove tracked in dirt and moisture.
• 4.5 metres of matting is required to remove the
majority of dirt and moisture from foot traffic.
• 4.5 metres can be divided in 3 mats, each with a
minimum length of 1.5 metres.
Reception areas typically receive higher footfalls
over their lifecycle. These areas are the second
line of defence for protecting the main building
floor coverings. Often located near a main
entrance these areas require heavy contract
protection while still maintaining an attractive
aesthetic and being easy to maintain.
KITCHEN / CANTEEN
Zone 1 - catches the first wave of heavy debris. Up to 40% of
dirt/moisture is removed from shoes in the first 1.5 metres
Often located near main entrances and receptions,
lift lobbies are the gateway to more delicate
floorcoverings in the building. Therefore the lift
lobby must be adequately protected with
secondary matting systems to ensure the final
stage of dirt and moisture is captured rather than
tracked into other areas.
PRODUCTION LINES
Canteens , kitchens and vending areas are prone
to spillages and an ingress of moisture. To
prevent build ups of dirt Mat.Works provides easy
to clean, impervious backed floorcoverings that
also provide excellent anti-slip properties. Many
of our anti-slip products can also withstand acid
and alkali spills.
CORRIDORS & WALKWAYS
Warehouses can be dangerous areas covered in
dirt and moisture. Mat.Works ergonomic matting
can provide safer surfaces to work on which are
engineered to provide anti-fatigue properties as
well ensuring dirt and moisture stays trapped
within the mat, rather than tracked into main
building areas.
Corridors and walkways are the arteries of a
building, they endure high footfall and frequent
wheeled traffic such as wheelchairs and trolleys.
These areas require a secondary entrance matting
product that provides a durable solution while
reducing maintenance costs. Mat.Works
secondary systems also create flowing, attractive
areas that conjoin other floor coverings easily.
ENTRANCE
Zone 2 - scrapes fine debris and absorbs moisture in the indoor
foyer area for up to 70% in the first 3 metres
LIFT
LOBBY
INTEGRATED SOLUTIONS
FIRE
EXIT
A guide to specifying suitable products in
different locations.
KEY
Primary Entrance Matting Systems
Anti-Slip Rubber Safety Flooring
Secondary Entrance Matting Systems
Ergonomic Anti-Fatigue Safety Matting
Tertiary Entrance Matting Systems
Paragon Floorcoverings
STAIRS
RECEPTION
WAREHOUSING
PRODUCTION LINE
Zone 3 - completes the drying process.
LINE
Use Mat.Works in and outdoor dust control matting in combination
with the 4.5 metre rule in order to achieve a fully functional system.
ENTRANCE
FACT : Mat.Works Tyre Tile is made from
100% recycled car, bike and lorry tyres
CORRIDOR / WALKWAY
MAIN OFFICE
Virtually all dirt and moisture is removed from shoes
after 4.5 metres.
4
WAITING
AREA
CAFETERIA
KITCHEN
ENTRANCE
5
“Heavy duty matting
for heavy traffic areas, the first
PRIMARY ENTRANCE
MATTING PRODUCTS
line of defence against dirt and
moisture. Primary products are
tough, versatile and often
- recessed into the floor”
6
7
Platoon Absorber
Anthracite
Blue
Brown
Platoon Premier
Dark Blue
?
Mercury
Charcoal
?
FRAMEWORKS
Description:
Frame.Works combines three core products to give strength where it’s needed most.
Made from tough aluminium extrusion, Frame.Works comes with 4 types of insert to suit most types of walked in
dirt and moisture, levels of foot traffic, colour schemes and budgets. With its unique semi open construction,
Frame.Works will collect more dirt than other similar closed tread systems.
Frame.Works is made from a heavy duty aluminium frame and flexible PVC connector bars. There are 4 different
types of inlay material for different types of application.
1. Rubber for exterior applications
2. Platoon Premier for all round moisture and dirt prevention
3. Platoon Absorber range of products for ultimate moisture absorbency
4. FB rib for dirt and moisture removal
For Platoon Premier
colour options, please
see its product
information page.
FRAMEWORKS
Technical Data:
Frame.Works 12mm
Weight
Frame Height
Height
Gauge
Aluminium
Hinge
carpet
9.7kg/m2
10mm
12mm
2mm
AL.MG. Si 0.5
– anodised natural
Anthracite PVC
brush
FB Rib
Silver
Charcoal
Blue
Technical Data:
Frame.Works 17mm
Weight
Frame Height
Height
Gauge
Aluminium
Hinge
11.1kg/m2
17mm
18mm
1.5mm
AL.MG. Si 0.5
Anthracite PVC
There are also sound reducing strips on the underneath of the product to prevent sound travelling through the
sub floor/damaging the sub floor. For heavy duty areas Mat.Works recommends the use of floor clips to keep
the mats in place.
Technical Data:
Colour Options Available 26 over 5 ranges
Accessories:
You may also be interested in:
Frameworks accessories – see page 58 for further details.
For simple rectangular mats, FrameWorks can be made
to exact requirements. For more complicated shapes, Mat.Works recommends the use of an approved installer.
rubber
carpet
rubber
brush
Rubber Options
Brush and Rubber
options available
Grey and Black
Technical Data:
Frame.Works 20mm
Weight
Frame Height
Height
Gauge
Aluminium
Hinge
11.1kg/m2
20 mm
22mm
1.5mm
AL.MG. Si 0.5
Anthracite PVC
carpet
rubber
brush
8
9
ECOLINE - TYRE TILE & ECO GRIDMASTER
ECOLINE - TYRE TILE & ECO GRIDMASTER
Mat.Works the Eco Warrior
Tyre Tile
Both mats incorporate recycled tyres as wiper strips within the products. Everyday
100,000 tyres are taken from cars, vans, trucks, buses and bicycles, what
happens to them? Until recently most were either dumped
or burnt, both of which are extremely harmful to the
environment. Tyres that are illegally dumped in the
countryside or in land fills are virtually impossible to break
down due to the synthetic and chemical materials inside
them, and when burnt these cause dense smoke and toxic
fumes, many of which cause a damaging carbon footprint,
we have introduced two new products which have little
impact on the environment and come from a 100% recycled
or recyclable source.
Mat.Works has
developed a
range of
eco-friendly
matting systems
under our new
Eco-Line brand
10
This gives us, the manufacturer, and you the consumer, the
opportunity to reduce our carbon footprint by not using raw
materials from source.
FACT : Mat.Works is ISO14001
Technical Data:
Weight
Thickness
Composition
Backing
Tile Size
Wear Classification
Flammability
DIN 4102
Colour Fastness
To light
Wet Rubbing
Dry Rubbing
Wet Shampoo
Colours Options
Available
Gridmaster Eco
Technical Data:
8410 gsm
10mm
Rubber Tyre with
Nylon Tread
Polyethylene Webbing
304mm x 304mm
Heavy Contract
B1
6
4-5
5
4-5
1
Environmental Management Systems accredited
Weight
Thickness
Composition
Wear Classification
Flammability
DIN 4102
Colour Fastness
To light
Wet Rubbing
Dry Rubbing
Wet Shampoo
Colours Options
Available
17800 gsm
17mm
Aluminium - AL.MG.Si0.5
Recycled Rubber Tyres
Galvanised Steel
Assembly Rods
Heavy Contract
B1
6
4-5
5
4-5
1
11
Brown
Green
Brown
Green
Blue
Grey
Navy Blue
Grey
Anthracite
Gold
Anthracite
Red
?
271 CITI™ 10mm BACKED
?
274 CITI™ 14mm UNBACKED
Description:
Description:
• This 10 mm thick backed version ensures minimum movement and keeps debris away from the floor in indoor areas.
Backing is a non-porous vinyl layer which is cured into the upper web for maximum non-delaminating durability.
• Vinyl loops scrape dirt and moisture off shoes, allowing it to fall in to the mat and not be tracked in to the building
(does not absorb water).
• Durable flexible material is ultra violet resistant, performs well in different climates and adapts to any surface.
• Thick coils (strand diameter 0.35 mm) of extruded from 100% PVC.
• Suitable for light to medium traffic conditions.
• For placement interior facility entrances or recessed wells.
• Slip resistance tested R11 according to DIN EN 130501-1 and BRG181.
• Vacuum clean or wash off with hose.
• Free of toxic DOP and DMF.
• Thick coils (strand diameter 1 mm) of extruded from 100% PVC, this mat of 14 mm thickness unbacked scrapes dirt
and moisture off shoes, allowing it to fall in to the mat and not be tracked in to the building.
• Unbacked version allows dirt and water to flow through in outdoor areas (does not absorb water).
• Suitable for heavy traffic conditions
Product Specifications:
Designation
Description
Material
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Designation
Description
Material
Top Fine
Backing
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Custom sizes
Special remarks
Dust Control Matting
Non-absorbent / scrape vinyl mat
coils (strand diameter 0,35 mm) of extruded from 100% PVC
Vinyl
Extrusion
Outdoor Non-absorbent - Spaghetti
In / outdoor - light to medium foot traffic areas
Gold, Green, Charcoal, Brown, Grey, Blue
4.6 kg/m²
10 mm
120 cm x 18 m
120 cm x 6 m
120 cm per linear meter
UV resistant
Product Testing:
Tests
Abrasion resistance
Colour fastness to light
Accelerated wear test by
sim floor machine
Accelerated soiling
Anti-slip
Water retention
Sanitary epidemiologic test
Norms
ASTM D3884
AATCC 16E
U.S.
U.S
DIN51130 BGR181
U.S
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
Results
R11
Surface Flammability
Classification of the
reaction to fire performance
Sustainability
Custom sizes
Special remarks
Thick coils (strand diameter 1 mm) of extruded from 100% PVC
Extrusion
Outdoor - Non-absorbent - Spaghetti
Outdoor - heavy foot traffic
Charcoal, Green, Brown, Red, Grey, Black, Navy-Blue
4.8 kg/m²
14 mm
120 cm x 18 m
120 cm x 6 m
UV resistant
Product Testing:
Tests
Abrasion resistance
sim floor machine
Accelerated soiling
Anti-slip
Water retention
Pass - Certificate no.
77.01.16.229.P.044983.07.
Norms
ASTM D3884
AATCC 16E
U.S.
Results
U.S
DIN51130 BGR181
U.S
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
77.01.16.229.P.044983.07.
ASTM D2859
DIN EN 13501-1
Bfl - S1
R11
Fire Testing:
Fire Testing:
12
Black
ASTM D2859
DIN EN 13501-1
Bfl - S1
• Recyclable material
• REACH compliant ( Registration, Evaluation, Authorization and restrictions of Chemicals)
• Contributes to cleaner environment by reducing need of cleaning chemicals
Sustainability
• REACH compliant ( Registration, Evaluation, -Authorization and restrictions of Chemicals)
13
Brown
Grey
Black
Navy Blue
Blue
Anthracite
Black
Smartscraper is suitable
for heavy traffic situations.
The surface has soft anti-slip PVC
inserts which scrape away moisture and dirt.
Green
273
? CITI™ 16mm BACKED
• This backed version ensures minimum movement and keeps debris away from the floor in indoor areas. Backing
is a non-porous vinyl layer which is cured into the upper web for maximum non-delaminating durability.
• Vinyl loops scrape dirt and moisture off shoes, allowing it to fall in to the mat and not be tracked in to the building
(does not absorb water).
• Thick coils (strand diameter 1 mm) of extruded from 100% PVC.
• Suitable for heavy traffic conditions.
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Custom sizes
Special remarks
Vinyl
Extrusion
Top
Backing
In / outdoor - heavy foot traffic
Charcoal, Green, Brown, Red, Grey, Black, Navy-Blue
7.6 kg/m²
16 mm
120 cm x 18 m, 120 cm x 6 m
UV resistant. Flexible material adaptable to any surface
Fire Testing:
Classification of the reaction to fire performance
Sustainability
14
Norms
ASTM D3884
AATCC 16E
U.S.
U.S
DIN51130 BGR181
U.S
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
Co-extruded PVC profiles combine the strength of the hard PVC with the soft, flexible and anti-slip profiles.
The PVC profiles are separated by aluminium scraper bars. The unique interlocking system minimises the
components used and enhances the strength and flexibility of the mat.
15
mm
5 5
mm mm
An open tread design which effectively collects dirt below the surface of the mat, manufactured from
co-extruded PVC with aluminium connector bars. Smartscraper is rollable and reversible which facilitates easy
cleaning and maintenance.
Function:
Smartscraper is an entrance matting system suitable for heavy traffic situations. The surface has soft anti-slip
PVC which scrapes away moisture and dirt. The scraped dirt is then trapped below the walking surface thus
preventing dirt from being carried into the building helping to reduce slip and fall accidents and maintenance
costs. Smartscraper is a rollable and reversible scraper mat for both interior and exterior applications.
Smartscraper is suitable for high heels, wheelchairs and shopping trolleys. For heavy duty areas Mat.Works
recommends the use of floor clips to hold the mat in place.
Technical Data:
Results
Weight
Thickness
Aluminium
PVC
Nominal Tensile stress (DIN 53455)
9300 gsm
15mm
AL.MG. Si 0.5
1.37 g/cm3
52 Mpa
R11
Tensile strength at yield (DIN 53455)
Elongation at break (DIN 53455)
Fire rating
Colour Options Available
50 Mpa
40-80%
B1 / Q1
2
77.01.16.229.P.044983.07.
Accessories:
Product Testing:
Tests
Abrasion resistance
Accelerated wear test by sim floor machine
Accelerated soiling
Anti-slip
Water retention
Description:
15 mm
Description:
Designation
Description
Material
SMART SCRAPER
?
ASTM D2859
DIN EN 13501-1
Bfl - S1
• REACH compliant ( Registration, Evaluation, Authorization and restrictions of Chemicals)
You may also be interested in:
Smartscraper accessories – see page 58 for further details.
The Smartscraper mat, due to its construction, is easily shaped on site, making cuts such as revolving doors
much easier to handle. For a superior finish, additional T-Bar profiles for joints, matwell frames and ramping are
available for this and the other products.
15
Rotherham Metropolitan
Borough Council
18,000M2 ACROSS MULTIPLE PRODUCTS
TM
Paragon Carpets and its sister
company Mat.Works Flooring
Solutions, have teamed up to
deliver a total soft Floorcoverings
package for Rotherham City Councils
new offices. A number of products
from the sister companies were used to
help Rotherham Council deliver a project
which is at the cutting edge of design
Description:
Ideal for outdoor use as a
loose lay entrance mat, Oct-O-Mat
and Oct-O-Flex have a heavy weight
construction meaning they won’t slide under
pressure. Constructed with smooth surfaces for the
disability discrimination act these mats are ideal to allow
disabled wheelchair access to move across them.
Oct-O-Mat
Oct-O-Flex
Technical Data:
Technical Data:
• Raised knobs underneath allow excellent
drainage, leaving a clean and dry surface.
• Raised knobs underneath allow excellent
drainage, leaving a clean and dry surface.
• Small holes diameter 14mm, compliant with EU
norm for public entrances.
• No bumpy surface, ideal for carts, wheel
chairs etc.
• Optional aluminium ramp kit available.
• Overall thickness: 12,5mm.
• Weight: 8kg per m2.
• Custom sizes available.
• Heavy weight assures non-shifting.
• Optional aluminium ramp kit available.
• Overall thickness: 23mm.
• Weight: 13,3kg per m2.
• Custom sizes available.
Recommended uses:
Recommended uses:
• Outdoor - Heavy foot traffic areas.
• Outdoor - Heavy foot traffic areas.
• Loose with optional Alu Ramp Kit TM
or placed in a recess frame.
• Loose with optional Alu Ramp Kit TM.
Colours:
Colours:
• Black.
• Black.
Stock sizes:
Stock sizes:
• 60 x 80cm, 75 x100cm,
80 x 120cm, 100 x 150cm
• 75 x 100cm
Accessories:
• Connectors, Insert Brushes, Alu Ramp Kit TM
16
or placed in a recess frame.
100 x 150cm
Accessories:
• Connectors, Alu Ramp Kit TM.
FACT l Mat.Works Tyre Tile is made from 100%
CASE STUDIES
TM
O
? CT-O-FLEX / OCT-O-MAT
Paragon had a number of their carpet tiles specified on the project including 4 colourways of the new Strobe
product, Lime, Plasma, Spark and Ignite (Lime is a bespoke to the client, lime green), which was used
extensively in breakout zones and meeting rooms. The new vibrant linear patterned carpet features a flash of
lime through the pile, which was exactly what the councils in house team were looking for.
Mat.Works Supplied the main entrance matting areas which incorporated Smart Scraper a unique matting
system, which can be used outside. Following this was Platoon Brush secondary carpet matting
incorporating the councils crest. Andy Gordon National Sales Manager for Mat.Works said “The main
entrance threw up a number of issues in terms of getting the correct amount of matting into the installation,
we brought the smart scraper element outside which meant we didn’t have to encroach onto the inner floor”
FACT l Mat.Works Tyre Tile is made from 100%
17
“The Second line of defence comes in the
form of our Tufted and Fibre bonded
entrance carpets and tile ranges.
SECONDARY ENTRANCE
MATTING PRODUCTS
Designed as standalone products
for medium to high traffic
areas or part of a 2 step system
for very high traffic areas.
A collection with numerous designs and
colour options to suit any interior decor”
18
19
Dark Blue
Mercury
Anthracite
Blue
Charcoal
Brown
PLATOON
PREMIER
?
?
Description:
Description:
Platoon Premier is an 80/20 wool/nylon mix with a monofilament scraper yarn.
With 30,000 scraper points per square metre plus the absorbency of the yarn, Platoon
Premier scrapes dirt and towels moisture from the soles of shoes in 1 swoop.
Platoon Absorber is our entry level tufted matting, designed with value and a budget
in mind. Constructed from 100% solution dyed nylon and incorporating an attractive
dog tooth pattern which effectively hides dirt within the design.
Techincal Data:
Specification
Style
Fibre Construction
Tuft Gauge
Pile Yarn Weight
Pile Height
Pile Density
Total Weight
Thickness
Primary Backing
Secondary Backing
Tile Backing
Roll Size
Tile Size
Wear Classification
Tufted Twist Pile
80% Wool / 20% Nylon +
monofilament scraper
1/8”
1500 gsm
6mm
117,800 tufts per m2
3100 gsm (Sheet)
5420 gsm (Tile)
10mm (Sheet) 12mm (Tile)
Colback
Flame Retardant Foam
Bitumen
25.00m x 2.00m
50cm x 50cm (Tile)
Heavy Contract
Performance Test:
Electro Static
Flammability
(BS EN ISO 11925.2)
(BS EN ISO 9239.1)
Less than 2Kv
Bfl-s1
Colour Fastness (BS1006)
Light (BS1006:B02)
Wet Rubbing (BS1006:B01)
Dry Rubbing (BS1006:X12)
Wet Shampoo (BS1006:UK-TB)
Style
Fibre Construction
Tuft Gauge
Pile Yarn Weight
Pile Height
Pile Density
Total Weight
Thickness
Secondary Backing
Roll Size
Mat Size
Wear Classification
Tufted Twist Pile
100% Polyamide
5/32”
850 gsm
6mm
75,000 tufts per m2
2650 g/m2
10mm (Sheet)
PVC
25.00m x 2.00m
90x60, 90x150 and
120x180mm (Mat)
Heavy Contract
Performance Test
Electro Static
Flammability
(BS EN ISO 11925.2)
(BS EN ISO 9239.1)
Less than 2Kv
Bfl-s1
Colours:
Colour Fastness (BS1006)
Light (BS1006:B02)
Wet Rubbing (BS1006:B01)
Dry Rubbing (BS1006:X12)
Wet Shampoo (BS1006:UK-TB)
Colour:
20
PLATOON ABSORBER
5
4-5
4-5
4-5
6
FACT : Our fibre bonded Secondary Systems
contain 10% recycled material
5
4-5
4-5
4-5
3
21
FB Rib Indy Blue
FB Rib Indy Blue
FB Rib Forrest Green
FB Rib Forrest Green
FB Rib Red
FB Rib Red
FB Rib Beige
FB Rib Beige
FB
? RIB : DOUBLE RIB
?
Description:
This product is ideal for the education market. Constructed from 80%
Polypropylene 20% Nylon this BREEAM “A” rated product is extremely hard
wearing. MatWorks FBRIB also includes 20% nylon which provides not only
added resistance to wear but also a design aesthetic, as the product will sparkle
in sunlight.
FB Rib Sisal
FB Rib Sisal
FB Rib Steel
FB Rib Steel
Technical Data:
Manufacturing Process
Surface Aspect
Pile Composition
Pile Weight
Pile Height
Primary Backing
Secondary Backing
Backing Weight
Total Weight
Total Height
Dimensions
Needle-felt
Ribbed
100% Polypropylene
1500g/m2 ± 10%
6mm ± 10%
Styr. But. Latex
Black Gel Foam
705g/m2 ± 10%
2205g/m2 ± 10%
12mm ± 10%
2m x 20m (Rolls)
Contract
Flame Properties:
Flammability EN13501-1
This product is ideal for the education market. Constructed from 80%
Polypropylene 20% Nylon this BREEAM “A” rated product is extremely hard
wearing. MatWorks FBRIB also includes 20% nylon which provides not only
added resistance to wear but also a design aesthetic, as the product will sparkle
in sunlight.
FB Rib Willow
FB Rib Willow
FB Rib Tabacco
FB Rib Tabacco
FB Rib Anthracite
FB Rib Anthracite
Surface Aspect
Pile Composition
Pile Weight
Pile Height
Primary Backing
Secondary Backing
Backing Weight
Total Weight
Total Height
Dimensions
Performance Test:
Classification for Use
Efl - fully adhesive
Flammability EN13501-1
8
Colours:
22
Needle-felt
Ribbed
100% Polypropylene
1500g/m2 ± 10%
4.5mm ± 10%
Styr. But. Latex
Black Gel Foam
705g/m2 ± 10%
2205g/m2 ± 10%
12mm ± 10%
2m x 20m (Rolls)
50cm x 50cm (Tiles)
Contract
Flame Properties:
Colours:
Description:
Technical Data:
Performance Test:
Classification for Use
FB RIB
Efl - fully adhesive
9
23
coir-natural
coir-black
coir-red
COIR
?
coir-green
Description:
Our world renowned coir product is made from hand spun coir yarns, tightly
woven to provide a hard wearing value product. A tough product designed for
commercial use, Coir can be cut into any shape or design to create tailored
entrance matting solutions.
CASE STUDIES
coir-charcoal
GRIDMASTER
WAVERLEY GATE
Mat.Works provided over 100sqm of Gridmaster for this
prestigious project. The install which involved embedding
innovative light units into the matting is located in a heavy
footfall traffic area. This required a product such as
Gridmaster that could cope with scraping the moisture and
dirt from thousands of feet per day at the same time as
remaining an attractive entrance solution.
ECO TILE
ASDA SHOPPING CENTRE
Mat.Works have won the prestigious contract to refit all
Asda Shopping Centre entrances using a range of products
from the primary and secondary ranges. The Eco Tile
product has been extensively used to date, providing an
attractive product with recyclable properties at the end of its
lifecycle. Its ability to scrape moisture and dirt in a heavy
footfall situation has saved on internal refit and maintenance
costs for Asda.
TYRE TILE
BUSH CONSULTANCY
ARCHITECTS PRACTISE BRISTOL
coir-lightgrey
The bush consultancy headquarters is situated in the
iconic Bristol landmark “The Old Paintworks”. When the
environmental architectural practise came to refit the
building they required contemporary looks in a product that
saved the earth at the same time. Mat.Works provided
50sqm of Tyre Tile made from 100% recycled car and bike
tyres with a striped linear design that provides a modern
stylish feel to any entrance.
Technical Data:
Pile material
Backing
Thickness available in
Other colours available in
Water absorption
Wearing class EN 1307
Sizes rolls
100% hand spun coir yarns
± 4 mm Vinyl back
17 mm - 20 mm
23 mm - 28 mm
17 mm
± 8,3 ltr / m2
Commercial moderate use
100 cm & 200 cm “
coir-orange
TYRE TILE AND GRIPFIT
MILLBROOK SHOPPING CENTRE
coir-blue
Middlebrook shopping centre required a two stage entrance
system, the first stage to scrape dirt from shoes and the
second to absorb moisture before footfall traffic could
deliver this moisture into potential slip zones. By using
Tyre Tile embedded into the revolving door entrances,
two thirds of dirt is scraped from shoes while a
supplementary installation of Grip-Fit mats in the inner
entrance safeguarded the shopping centre from any
remaining moisture.
Colours:
9
coir-yellow
FRAMEWORKS
INTERCITY HOUSE
Mat.Works provided an attractive, embedded installation of
Smartscraper primary entrance matting at Intercity House
ensuring 2/3 thirds of dirt and moisture was removed from
shoes before entering the more delicate carpet installation
in the reception area.
24
25
“Tertiary products in the Mat.Works range
are all about dust control. Up to 80% of
TERTIARY ENTRANCE
MATTING PRODUCTS
interior soil is brought into facilities by
foot traffic. By using a scheme of
tertiary products you can ensure your
entrance is clean, attractive and an
area with a low risk of slip hazards”
27
26
Anthracite
Blue
Brown
White
Blue
Green
Grey
AQUA
ABSORBER
?
?
AQUA BARRIER
Dark Brown
Description:
Description:
100% polypropylene tufted loose lay mats affording excellent hard wearing
characteristics. These loose lay mats provide high performance in moisture
absorbency and are easy to maintain and clean
100% polypropylene tufted loose lay mats affording excellent hard wearing
characteristics. These loose lay mats provide high performance in moisture
absorbency and are easy to maintain and clean
Light Brown
Technical Data:
Yarn
Pile Composition
Backing
Total Weight
Pile Height
Total Height
Tuft Density
Flammability
Colourways
Dimensions
28
Technical Data:
Velour
Tufted 5/32”
100% PA Contract
Vinyl
CA 3.200 GSM
CA 8mm
CA 10mm
CA 75.000/m2
Cfl-s1
3 Blue / Brown / Anthracite
1.2 x 25 m Roll
2.05 x 25 m Roll
Loose Lay Mats
40 x 60cm
60 x 90cm
90 x 150cm
FACT : By reducing our energy useage by 10%
Red
Yarn
Pile Composition
Backing
Total Weight
Pile Height
Total Height
Tuft Density
Flammability
Colourways
Dimensions
year on year we are comitted to becoming Carbon Neutral
Velour
Tufted 5/32”
100% Polypropylene
Vinyl
CA 3.190 GSM
CA 5mm
CA 8mm
CA 55.440/m2
Cfl-s1
7 Blue / Dark Brown / Anthracite
Red / Light Brown / White / Green
0.9 x 25m Roll
1.2 x 25 m Roll
2 x 25 m Roll
Loose Lay Mats
40 x 60cm
60 x 90cm
90 x 150cm
120 x 180cm
90 x 120cm
120 x 240cm
29
AQUA
WORKS
?
TM
?
AQUA TURF
Description:
Description:
• Indoor - Heavy footfall traffic areas.
• Medium level mat designed for medium/high traffic entrances suitable for pedestrian/light trolley traffic
i.e. Supermarket operations.
• Indoor - Heavy footfall traffic areas
• Medium level mat designed for medium/high traffic entrances (i.e. large shops pedestrian traffic)
Technical Data:
Technical Data:
• Tufted looped pile textile moulded into waffle
pattern with durable rubber base.
• Unbreakable edges and anti-slip backing structure.
• 800 grams of Decalon® yarn per m2.
• Loop pile carpet combined with loop pile grass,
tufted in attractive chess board design.
• 900 grams of dual yarns per m2.
• Affords excellent scraping and absorption capability.
• Overall thickness: 8mm.
• Weight 4,3kg per m2.
Stock sizes:
• 60 x 90cm
• 90 x 120cm
• 90 x 150cm
• 120 x 180cm
Colours:
• Brown, Blue, Red, Burgundy,
Charcoal, Grey, Green.
TM
Stock sizes:
• 60 x 90cm
• 90 x 120cm
• 90 x 150cm
• 120 x 180cm
• 120 x 240cm
Rolls:
• 120cm x 18,3m
• 180cm x 18,3m
Custom Lengths:
• 120cm per linear metre
Colours:
• Red, Green, Blue, Brown,
Charcoal, Burgundy
30
31
AQUA
MAT
?
TM
?
Description:
Description:
• Indoor - Light to medium footfall traffic areas.
• Entry level mat designed for medium traffic areas (i.e. small shops)
• The mat is designed to function at the immediate
entrance, primarily as a scraper mat to stop dirt,
grit and grime outside the doorway.
• No bumpy surface, ideal for carts, wheel chairs etc.
• Friendly for elderly or disabled people.
• Strong product, suitable for heavy foot traffic.
• Small drainage holes diameter, compliant with
EU norm for public entrances.
Technical Data:
Custom Lengths:
• Tufted cut pile carpet.
• Provides moisture and grime retention.
• 700 grams of Decalon® yarn per m2.
• Dense vinyl backing.
• Excellent water absorption capacity.
Stock sizes:
• 60 x 90cm
• 90 x 120cm
• 90 x 150cm
• 120 x 180cm
Rolls:
• 90cm x 18,3m
• 120cm x 18,3m
• 180cm x 18,3m
Colours:
• Brown, Navy, Blue, Red, Grey, Green.
599 OCT-O-FLEX™ BEVELLED
• Withstands weather extremes of all seasons and the
heaviest of foot traffic.
• Open structure and raised knobs permit water to drain
through, leaving a clean and dry surface.
• Excellent adherence and adapts to any surface.
• Natural rubber, environmentally friendly.
• Hose off with water.
Designation
Description
Type
Material
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Custom Sizes
Special remarks
Octogonal ring design with open construction
Non-absorbent/ scrape rubber mat
Natural rubber compound
Compression moulding
Outdoor Non-absorbent - Rubber classics
Outdoor - medium to heavy foot traffic
Black
9,8 kg/m²
12,5 mm
70 cm x 90 cm, 90 cm x 150 cm, 120 cm x 180 cm
Per m²
Suitable for use under extreme weather
Small holes diameter 14 mm, compliant with EU norm for public entrances
Product Testing:
Tests
Abrasion resistance
sim floor machine
Accelerated soiling
Anti-slip
Water retention
Hardness
Norms
ASTM D3884
AATCC 16E
U.S.
U.S
DIN51130 BGR181
U.S
U.S.
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
Results
R11
77.01.16.251.P.044985.07.09
Fire Testing:
Classification of the reaction to fire performance
Sustainability
32
FACT : Our modern factory cooling system utilises
ASTM D2859
DIN EN 13501-1
• REACH compliant (Registration, Evaluation, Authorization and restrictions of Chemicals)
fresh external air where possible to reduce energy useage
33
265
? WAYFARER® 10mm BACKED
Description:
• Standard size CiTi™ mat, 10 mm backed, for lose lay,
with pressed beveled borders on all four sides.
• Vinyl loops scrape dirt and moisture off shoes,
allowing it to fall in to the mat and not be tracked in
to the building (does not absorb water).
• Durable flexible material is ultra violet resistant,
performs well in different climates and adapts to
any surface.
• This backed version ensures minimum movement.
• Fine coils (strand diameter 0.35 mm) of extruded from
100% PVC.
• Suitable for light to medium conditions.
• For placement interior facility entrances or
recessed wells.
Designation
Description
Type
Material
Top
Backing
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Special remarks
« Spaghetti » matting with backing
Fine coils (strand diameter 0,35 mm) of extruded from 100% PVC
Vinyl
Extrusion
Out / indoor - light to medium foot traffic
Grey
4 kg/m²
10 mm
90 cm x 150 cm, 120 cm x 180 cm
UV resistant
Product Testing:
Tests
Abrasion resistance
sim floor machine
Accelerated soiling
Anti-slip
Water retention
Norms
ASTM D3884
AATCC 16E
U.S.
Results
15.6 % weight loss
U.S
DIN51130 BGR181
U.S
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
2.5
R11
2.9 l/m2
77.01.16.229.P.044983.07.
5
Fire Testing:
Sustainability
34
266 WAYFARER® 14mm UNBACKED
?
Description:
• Standard size CiTi™ mat, 14 mm unbacked, for lose
lay, with pressed beveled borders on all four sides.
• Vinyl loops scrape dirt and moisture off shoes, allowing
it to fall in to the mat and not be tracked in to the
building (does not absorb water).
• Durable flexible material is ultra violet resistant,
performs well in different climates and adapts to
any surface.
• This unbacked version allows water to flow through.
• Thick coils (strand diameter 1 mm) of extruded from
100% PVC.
• Suitable for heavy traffic conditions.
• For placement interior facility entrances or
recessed wells.
Designation
Description
Type
Material
Top
Backing
Process
Category
Recommended use
Colours
Weight
Thickness
Standard sizes
Special remarks
Thick coils of « Spaghetti » matting
Unbacked
Extrusion
Outdoor - heavy foot traffic
Grey, Red, Navy Blue
4,6 kg/m²
14 mm
90 cm x 150 cm, 120 cm x 180 cm
UV resistant
Product Testing:
Tests
Abrasion resistance
sim floor machine
Accelerated soiling
Anti-slip
Water retention
Norms
ASTM D3884
AATCC 16E
U.S.
Results
4.7% weight loss
U.S
DIN51130 BGR181
U.S
GN 2.1.6.1338-03 MCL
GN 2.1.6.2309-07 OBUV
4
R11
77.01.16.229.P.044983.07.
ASTM D2859
DIN EN 13501-1
Pass
Bfl - S1
5
Fire Testing:
ASTM D2859
DIN EN 13501-1
Bfl - S1
• REACH compliant (Registration, Evaluation, Authorization and restrictions
of Chemicals)
Sustainability
• REACH compliant (Registration, Evaluation, Authorization and restrictions
of Chemicals)
35
DESIGN MAT
DESIGN MAT
?
Description:
Art. 190 DesignMatTM
• This truly high quality multi-functional Dust Control Mat not only cleans and dries shoe-soles preventing dirt and
moisture being tracked into facilities. It also provides an excellent opportunity to address safety issues as most
people primarily look to the floor.
• Superior colour fastness is ensured, in accordance with DIN54006. We work with 16 standard PMS colours,
which allows any other colour to be matched. DesignMat offers a state-of-the-art technology that even allows
3-dimensional effects, fine lines and colour shading, so each mat has a truly individual customised image.
• Tufted cut loop carpet mat consisting of 100%non-crush polyamide
6.6 high twist yarn, approx 700gr/m2.
• Nitrile rubber backing, 1,5mm thick.
• Non slip-gripper backing.
• Enforced borders, do not curl in cold weather and will not tear.
• Machine washable at 50oC.
• Oil and microbe resistant.
• Excellent moisture absorption capacity: >4ltr/m2.
• Pile height 7mm.
How to Order
1. Title or name
Give any name relevant to the design.
2. Send logo or image to [email protected]
Acceptable formats are JPG, TIF, EPS, PCX, Adobe Illustrator, Certified PDF
In case no logo is available, text is also possible. In such case, give text, preferred letter type and letter colour.
3. Sizes:
Select required mat size.
60 x 85cm
115 x 180cm
85 x 115cm
115 x 240cm
85 x 150cm
150 x 240cm
Sizes are approximate, subject to a tolerance of about 3%.
4. Orientation:
Landscape
Portrait
Landscape or Portrait.
5. Background Colour
Recommended are dark colours.
1. off-white
9. green
2. salmon pink
10. blue
3. gold-yellow
11. burgandy
4. light grey
12. brown
5. light blue
13. dark grey
6. red
14. dark green
7. orange
15. dark blue
8. yellow
16. black
6. Quantity
(Colours shown
may deviate
slightly from the
original colours).
Indicate number of mats.
More mats per design lowers the cost.
36
37
“Anti-slip matting saves lives, every
year slip and trips in the workplace
account for £512M (Source HSE)
per year in lost working days and
ANTI-SLIP
RUBBER MATTING
compensation claims. Anti-slip matting
can protect your workforce with
innovative bevelled edges and safety
marking to ensure your workforce
remain fit and able to drive your
business forward”
38
39
RIB
? ‘N’ ROLL
TM
RIB ‘N’ ROLL
?
TM
Don’t become a HSE statistic – prevent slips and trips in the workplace
This rubber matting benefits from excellent wear and tear resistance along with class leading anti-slip properties.
Bevelled edges and safety marking ensures excellent protection against slips and trips in the workplace. Often used
as flooring, shelf liners and in all kinds of industrial applications. These products can be applied in workshops, near
machinery and any place where objects may slide such as on work benches, carts, cars or lorry booths. These
products will withstand spills of diluted acids and alkalis.
TM
Art. 750 Rib‘n’Roll 3mm fine rib
• SBR rubber
• Surface: fine rib profile
• Hardness (ISO7619, DIN53505): 60 Shore A
• Specific gravity (DIN53504): black 1,5 g/m3
• Tensile strength (DIN53504): 3,5 Mpa
• Elongation at break (DIN53504): 250%
• Abrasive resistance (ISO4649,
DIN53516): 300-500mm3
• Resistance to temperature black
-300C, +700C, grey -200C, +700C
• Stock sizes black
100cm x 10m, 120cm x 10m
• Stock sizes grey 100cm x 10m
TM
• SBR rubber
• Hardness (ISO7619, DIN53505):
60 Shore A
• Abrasive resistance (ISO4649,
DIN53516): 300-500mm3
• Resistance to temperature black -300C,
+700C, grey -200C, +700C
100cm x 10m, 120cm x 10m
TM
Art. 746GR Check‘n’Roll 3mm nitrile
TM
• Stock sizes black 100cm x 10m
• NR (nitrile) rubber
• Surface: industrial checker plate profile
• Oil resistant
• Density: 1,43 g/m3
• Tear strength (ISO 34-1): 7 N/mm2
• Elongation at break: 250%
• Abrasive resistance
(ISO4649, DIN53516): 300-500mm3
• Dimensional stability (EN 434): 0,15%
• Resistance to temperature black
-100C, +700C
• Sound reduction: 20dB
TM
Art. 752 Rib‘n’Roll 3mm broad rib
• Surface: broad rib profile
TM
Art. 745 Dots‘n’Roll 4mmfine rib
TM
Art. 753 Rib‘n’Roll 6mm broad rib
• Surface: broad rib profile
All round floor covering for industrial and
general applications. Suitable for buildings,
walking areas, stations, airports,
supermarkets, lifts, buses, ships etc.
• SBR rubber
• Surface: profile of mildly raised dots
• Hardness (ISO7619): 75 Shore A
• Tear strength (ISO 34-1): 20 N/mm2
• Abrasive resistance (ISO4649): 250mm3
• Dimensional stability (EN 434): 0,4%
• Resistance to temperature -200C, +700C
• Sound reduction: 20dB
Art. 737 Diamond Plate Runner 4,7mm nitrile
TM
Art. 750RS Rib‘n’Roll 3mm fine rib
• NBR/SBR rubber compound, grease resistant
• Abrasive resistance
40
(ISO4649, DIN53516):
300-500mm3
• Resistance to temperature black -100C,
+700C
Durable industrial vinyl flooring with rugged
deck plate pattern for non-directional anti-slip
• PVC compound
• Surface: profile of raised diamonds
• Hardness (ISO7619): 85 Shore A
• Tear strength (ASTMD-1004): 35 N/mm2
• Abrasive resistance:
0,09 grams lost maximum
• Flammability: self-extinguishing A
91cm x 22,8m, 122cm x 22,8m
• Stock sizes grey
91cm x 22,8m, 122cm x 22,8m
41
“This section includes mats designed
using the latest technology. Our Anti-fatigue
mats are designed using innovative
memory impact rubber which allows the
ERGONOMIC ANTI-FATIGUE
&
SAFETY MATTING
body to naturally sway, this stimulates
blood flow in the calf muscles and
prevents workers feeling fatigue.
The mats also reduce the effect of
cold/damp floors by lifting the worker
above the cold level ensuring your
workforce will be fully concentrated
on the job at hand”
42
43
?
CUSHION EASE
Description:
• With holes for excellent drainage and aeration
leaving a dry, clean work area.
• These interlocking mats allow on-site customization.
Square snap together mats of 91x91cm that can be
assembled effortlessly and laid out from wall to wall
or as islands in any direction or shape.
• Compatible with patented MD-Ramp SystemTMfor smart
safety bevelling solutions. Allow out and inside corners.
• “Superb anti-fatigue properties due to its unique
design utilising high quality, resilient rubber
compounds. Available in general purpose quality or a
variety of Solutions Formula’s, including oil proof, fire
retardant, anti-bacterial, brake fluid resistant and
GSllTM anti-slip gritted.”
• Designed to yield a long service life.
• Resistant to most chemicals and extreme temperatures.
• Free of silicone therefore safe for vehicle
painting facilities.
• Ergonomic benefit derived from 19mm thick
worker platform.
Art. 550 Cushion-Ease
• General purpose rubber compound.
TM
Art. 650FR Niru® Cushion-Ease FR
• 100% nitrile rubber compound, oil proof and fire retardant, suitable for welding areas.
• Fire classification Bfl-S1 according to DIN EN 13501
and Class 1 according to ASTM E648-03 (NFPA253).
TM
Art. 650BF Niru® Cushion-Ease BFR FR
• 100% EPDM rubber compound, brake fluid resistant.
• Fire classification Bfl-S1according to DIN EN 13501 and Class 1 according to
ASTM E648-03 (NFPA253).
TM
Art. 650AB Niru® Cushion-Ease AB FR
• Anti-bacterial 100% nitrile rubber compound, suitable for use in food processing plants.
• Fire classification Bfl-S1according to DIN EN 13501 and Class 1 according to ASTM E648-03 (NFPA253).
TM
Art. 550RD Cushion-Ease RED
• 75% nitrile rubber compound, grease resistant, suitable for contact with vegetable oil and
animal fats in food service applications.
TM
TM
Art. 650AB Niru® Cushion-Ease GSll FR
• With abrasive coating for extremely slippery areas.
• Fire classification Bfl-S1according to DIN EN 13501 and Class 1 according to ASTM E648-03 (NFPA253).
You May Need Accessories: MD Ramp SystemTM
Male and female attachable bevels 91cm, yellow, black and brick red.
Recommended uses:
Heavy duty - wet/dry industrial environments.
Stock sizes:
44
• 91cm x 91cm
45
CUSHION-EASE SOLID
TM
?
CUSHION TRAX
Description:
• Closed anti-slip ‘pebble structure' surface.
• These interlocking mats allow on-site customization.
Square snap together units of 91x91cm that can be
assembled effortlessly and laid out from wall to wall or
as islands, in any direction or shape.
• Compatible with patented MD-Ramp SystemTM for smart
safety bevelling Solutions; allow out and inside corners.
• Superb anti-fatigue properties due to its unique design
comprising high quality resilient rubber compounds.
Available in general purpose quality or a variety of
Solution Formula’s, including oil proof, fire retardant,
ESD, GSllTM anti-slip gritted, non conductive.
• Designed to yield a long service life.
• Resistant to most chemicals and extreme temperatures.
• Free of silicone therefore safe for vehicle
painting facilities.
• Ergonomic benefit derived from 19mm thick
worker platform.
• Slip resistance R9 according to DIN5ll30 and BG-rule
BGR181.
TM
Description:
• Extreme level of comfort.
• 4,7mm PVC top surface permanently bonded onto a resilient
backing of microcellular vinyl.
• Available with yellow borders which comply with OSHA code
1910-144.
• Fire classification B1 tested according to DIN4102.
TM
Art. 556 Cushion-Ease Solid
• General purpose rubber compound.
Art. 556RS Cushion-Ease Solid RS
Technical Data:
• 75% nitrile rubber compound, grease resistant.
• Heavy duty - dry industrial
environments.
TM
TM
Art. 656FR Cushion-Ease Solid FR
Colours:
• Fire classification Bfl-S1 according to DIN EN 13501 and Class 1 according to ASTM E648-03 (NFPA253).
• Black, Grey, Black / yellow
Stock Sizes:
TM
Art. 656NC Cushion-Ease Solid NC FR
• 60 x 91cm
• 91 x 152cm
• 91 x 3m
• 91 x 6m
• 91 x 10m
• Non-conductive SBR-nitrile rubber compound, to meet IEC 61-111 norm for matting of insulating material
electrical purposes.
TM
TM
Art. 856 Cushion-Ease Solid GSll FR
• With abrasive coating for extremely slippery areas.
• Fire classification Bfl-S1 according to DIN EN 13501 and Class 1 according to
ASTM E648-03 (NFPA253).
Custom lengths:
• 60cm
• 91cm
• 122cm widths
TM
Art. 656Dl Cushion-Ease Solid ESD DIF FR
Full Rolls 22,8m:
• Static dissipative 100% nitrile rubber compound.
• Meets IEC61340-4-1, measured resistance Rg 106-109 Ω, Rp 106-109 Ω.
• 60cm
• 91cm
• 122cm widths
TM
Art. 656Dl Cushion-Ease Solid ESD CON FR
• Conductive 100% nitrile rubber compound.
• Meets IEC61340-4-1, measured resistance Rg 104-106 Ω, Rp 104-106 Ω.
You May Need Accessories:
MD Ramp SystemTM
Male and female attachable bevels 91cm, black and yellow.
Recommended uses:
• Heavy duty - dry industrial environments
Stock sizes:
46
• 91cm x 91cm
FACT : We recycle a wide range of materials
from ink cartridges to wire ball ties
47
MARBLE
SOF-TILE
?
TM
?
Description:
Description:
• Smooth rubber top surface embedded
with a marbled pattern.
• Offers exceptional comfort and durability,
allows combined use with stools.
• Resists slips and falls.
• Easy to mop and/or sweep clean.
• Wood tones laminate top surface.
• Combines style comfort, ideal for behind adjustable desks.
• Easy to mop and/or sweep clean.
Technical Data:
Technical Data:
• Heavy duty - industrial, tertiary,
laboratory environments - dry areas.
• Heavy duty - office environments
Stock Sizes
• 60 x 91cm
91 x 152cm
Full Rolls 22,8m:
SOFTONE
TM
Stock Sizes
• 91cm x 120cm, 91cm x 150cm,
122cm x 150cm
Custom Lengths:
• 91cm and 122cm widths
• 60cm, 91cm and 122cm widths
Custom Lengths:
Colours:
• Maple, Beech, Cherry
Colours:
• Black, Beige, Grey, Blue
48
49
A
?IRUG
®
SOF-TRED
Description:
Description:
• Bevelled on all 4 sides
• Ribbed pattern enhances traction
• Weight: 3kg per m2
• Thickness of 9.4mm
• Bevelled on all 4 sides
• Ribbed pattern enhances traction
• Weight: 3kg per m2
• Thickness of 9.4mm
Technical Data:
Technical Data:
• Light duty - dry areas
• Light duty - dry areas
Stock Sizes:
Stock Sizes:
• 60cm x 91cm, 91cm x 152cm
• 60cm x 91cm, 91cm x 152cm
Full Rolls 18,3m
Custom Lengths:
Custom Lengths:
Custom Lengths:
• Black, Grey
Colours:
• Black, Grey, Blue, Black/Yellow
50
FACT : As part of the National Floorcoverings
Group we have BREEAM ‘A’ rated products
51
562BL roll
562RD roll
TM
S
?ANITOP AND SANITOP DELUXE
TM
?
SanitopTM and Sanitop DeluxeTM are loose lay
mats with moulded bevelled edges on all 4
sides for trip resistance and easy cart access.
Possessing excellent anti-fatigue properties
the Sanitop range is ideally installed in Food
industries such as commercial kitchens,
abattoirs and other wet/dry industrial
environments requiring heavy duty mats, that
can be easily and regularly cleaned.
TM
Art. 562 Sanitop
Art. 563 Sanitop Deluxe
Technical Data:
Technical Data:
• Overall thickness:
• Weight:
12,7mm.
8kg per m2.
Stock sizes:
• Heavy duty - wet / dry
industrial environments.
• Food service, dairy - a fish
industry, abattoirs.
• 91cm x 152cm.
Stock sizes:
Colours:
• 91cm x 152cm.
• Black - General Purpose.
• Red or blue - 75% nitrile, grease resistant.
Accessories:
• Connectors.
• Attachable yellow ramps 91cm piece,
152cm piece, per linear metre.
• Moulded bevelled edges on all 4 sides
for trip resistant and easy cart access.
52
TM
TM
Description:
TM
DIAMOND STAT
Colours:
• Black - General Purpose.
• Red or blue - 75% nitrile, grease resistant.
Diamond Sof-Tred
Description:
Ideally suited to the electronics industry, the revolutionary
Diamond StatTM product redirects static electrical
discharges through a connecting wire attached to the matting.
This ensures worker comfort and safety and similarly ensures
delicate technical equipment is not damaged by sporadic
electric discharges.
• Non-directional “ Deck Plate” pattern.
Technical Data:
• Medium duty, dry areas.
Stock sizes:
• 60 x 91cm and 91 x 152cm.
Colours:
• Grey, Black, Black / yellow.
Full Rolls 18,3:
• 60cm, 91cm and 122cm widths.
Custom Lengths:
• 60cm, 91cm and 122cm widths.
Accessories:
• Connectors.
• Attachable yellow ramps 91cm piece,
152cm piece, per linear metre.
53
CHEMICAL RESISTANCE GUIDE
Chemical
Propanol (isopropal alcohol)
Acetaldehyde
Acetic Acid
Acetic Acid
Acetic Anhydride
Acetone
Ammonium Hydroxide
Amyl Acetate
Aniline
ASTM #1
Beef Fat
Benzene
Benzoic Acid
Benzyl Alcohol
Boric Acid
Brake Fluid
Bromine
Butane
Butter
Butyl Acetate
Butyl Alcohol (butanol)
Calcium Chloride
Calcium Hydroxide
Carbolic Acid (liquid phenol)
Carbon Monoxide
Carbon Tetrachloride
Chicken Fat
Chloroacetone
Chloroform
Chromic Acid
Form
Chemical Family
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Solid/Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid/Gas
Liquid
Solid/Liquid
Liquid
Liquid
Solid
Solid
Liquid
Gas
Liquid
Solid/Liquid
Liquid
Liquid
Liquid
Alcohol
Aldehyde
Acid (weak, organic)
Acid (weak)
Ketone
Base (weak)
Carboxylic Acid (Aliphatic)
Base (aromatic, organic)
Paraffin Oil
Art. 480
Concentration
50%
Glacial
50%
28-30%
Aromatic HC
Carboxylic Acid (Aromatic)
Alcohol
Acid (weak)
Ether/Glycol
Halogen
Aliphatic HC
Carboxylic Acid (Aliphatic)
Alcohol
Inorganic Salt
Metal Hydroxide
Acid (organic)
Inorganic Carbon Compound
Halogenated Organic Liquid
Ketone
Aliphatic HC
Acid (weak)
50%
Art. 470
Art. 745
Art. 545
Art. 556
Art. 550
Art. 562BL
Art. 563BL
Art. 045
Art.667S
Art. 656SFR
Art. 746
Art. 750
Art. 751
Art. 752
Art. 753
Art. 832
1
2
3
2
3
3
4
4
4
4
4
4
4
4
1
4
4
4
4
4
1
1
1
4
3
4
4
4
4
4
1
2
3
2
3
3
4
4
4
4
4
4
4
4
1
4
4
4
4
4
1
1
1
4
3
4
4
4
4
4
Art.549
Art.543
Art.580
Art. 746GR
Art. 410
Art. 856SFR
Art.661S
Art.665S
Art.650SFR
Art.662S
Art.850SFR
2
4
3
3
2
4
4
4
4
1
1
4
4
4
1
4
4
1
1
4
1
1
1
4
2
3
2
4
4
4
2
4
3
3
2
4
4
4
4
1
1
4
4
4
1
4
4
1
1
4
1
1
1
4
2
3
2
4
4
4
Art. 556RS
Art. 550RD
Art. 562RD
Art. 563RD
Art. 563BU
Art. 750RS
Art.411
Art. 422
Art. 419
Art. 406
Art. 413
Art. 417
Art. 825
Art. 827
Art. 420
Art.979
Art. 479
Art. 478
Art. 737
Art. 826
Art. 830
Art. 520
Art. 522
Art. 520HD
Art. 522HD
Art. 920HD
Art. 922HD
Art. 451
Art. 450
Art. 663S2
2
4
3
3
2
4
4
4
4
1
2
4
4
4
1
4
4
1
2
4
1
1
1
4
2
3
2
4
4
4
2
3
4
2
4
3
1
3
4
n/a
2
4
1
4
1
4
2
3
1
3
1
2
2
4
1
4
2
4
4
3
2
3
4
2
4
3
1
3
4
n/a
2
4
1
4
1
4
2
3
1
3
1
2
2
4
1
4
2
4
4
3
2
3
4
2
4
3
1
3
4
n/a
2
4
1
4
1
4
2
3
1
3
1
2
2
4
1
4
2
4
4
3
4
4
4
3
4
4
4
4
4
1
2
4
4
4
1
4
4
3
2
4
3
1
2
4
1
4
2
4
4
4
1
2
2
2
2
1
2
2
2
4
4
4
4
4
4
1
4
4
2
3
2
1
1
4
1
4
4
2
4
3
MATTING CARE TIPS
Carpet Care Tips
To help you maintain your mats appearance
and usefulness over the longest possible
time, the manufacturer suggests:
Wet Shampooing
When daily care (vacuuming, etc.) fails to
restore colour of carpet surface due to
excessive embedded soil, shampooing is
recommended. Use any neutral synthetic
detergent with tepid water (1/2 cup per gallon
of water). Hand brush method will yield good
results. Use sponge or cloth to remove suds.
If carpet is matted with excessive soil, use
detergent with brushing as described and
follow by rinsing with cool water until soil is
removed. Remove excess water with floor
squeegee and place in an inclined position to
drain dry. If on-site maintenance is not
available, manufacturer recommends mat be
sent to reputable rug cleaner and be
professionally shampooed for a nominal cost.
If professional shampooing is required, use
only flat washing equipment, and temperature
not exceeding 120º F. Manufacturer cannot be
responsible for damage resulting from
cleaning in rotary laundering equipment.
Spot Removal Stains
Citric Acid
Corn Oil
Cottonseed Oil
Cyclohexane
Cyclohexanol
Cyclohexanone
Dibutyl Phthalate
Diesel fuel
Diesel Oil
Dioctyl Phthalate (DOP)
Ethane
Ethyl Acetate
Ethyl Alcohol (ethanol)
Ethyl Ether
Ethylene Glycol (antifreeze)
Formaldehyde
Formic Acid
Fresh Water
Fuel Oil
Gasoline
Gear Oil (85w-140)
Glucose
Glycerin
Heptane
Hexane
Hydraulic Fluid
Hydrazine
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen Peroxide
LEGEND:
1 = Recommended
2 = Suitable for Use
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Fatty Acid
Fatty Acid
Aliphatic HC
Alcohol (cyclic)
Ketone
Ester
Petroleum HC
Petroleum HC
Ester
Aliphatic HC
Ester
Alcohol
Ether
Alcohol
Aldehyde
Aliphatic HC
Aliphatic HC
Paraffin Oil
Sugar
Alcohol
Aliphatic HC
Aliphatic HC
Aliphatic HC
Base (weak)
Acid (strong)
Acid (weak)
10%
37%
30%
30%
1
4
4
4
4
4
4
4
4
4
4
2
1
4
1
3
2
1
4
4
4
1
1
4
4
4
4
2
4
3
1
4
4
4
4
4
4
4
4
4
4
2
1
4
1
3
2
1
4
4
4
1
1
4
4
4
4
2
4
3
1
1
2
1
3
4
4
1
1
3
1
4
1
3
1
2
2
1
1
1
1
1
1
1
1
1
2
4
4
3
1
1
2
1
3
4
4
1
1
3
1
4
1
3
1
2
2
1
1
1
1
1
1
1
1
1
2
4
4
3
Use of product in environments specified as "USEABLE, NOT RECOMMENDED" or "NOT RECOMMENDED" may lead
to product failure and will void warranty.
These ratings are intended to be used as a guide only. For decisive results, please call for a free product sample for onsite testing in actual conditions.
Actual results may vary depending on concentration of chemicals. Ratings for products 470, 478, 479, 480, 979 refer to
top surface.
1
2
3
1
3
4
4
1
1
3
1
4
1
3
1
2
2
1
1
1
1
1
1
1
1
1
2
4
4
3
2
1
1
4
1
4
3
3
3
4
1
3
3
3
1
1
1
1
2
3
2
1
1
2
3
2
1
2
3
1
3 = Useable, not recommended
4 = Not Recommended NB:
2
1
1
4
1
4
3
3
3
4
1
3
3
3
1
1
1
1
2
3
2
1
1
2
3
2
1
2
3
1
2
1
1
4
1
4
3
3
3
4
1
3
3
3
1
1
1
1
2
3
2
1
1
2
3
2
1
2
3
1
1
1
1
2
--4
4
--3
4
2
4
4
3
4
3
4
1
3
2
--1
2
2
2
4
4
4
4
2
1
4
4
4
4
2
1
4
4
3
4
4
1
4
1
2
1
1
4
4
4
2
2
4
4
4
1
2
2
2
When a spill occurs, absorb as much liquid
as possible with any clean absorbent
material. On oil or grease based stains, use
dry cleaning fluid in small amounts and blot
until stain is removed.
Vacuum or Broom Daily
This is important especially in heavy traffic
areas. Best results are obtained when carpet
surface is dry.
Shedding or Fuzzing
A shedding or fuzzing condition is not a
carpet defect, but rather common to all new
fabrics. This will disappear after the first few
vacuum cleans.
Storage & Handling
Roll carpet in compact roll with pile facing
out. Lay flat. Do not crush. Store in a
moderate temperature and dry area.
CAUTION: If the borders on matting become
broken or curled, the matting should be
removed from service until the tripping
hazard can be corrected.
Under all circumstances regular cleaning is strongly recommended for hygienic/safety reasons and to
reduce the effects of abrasion or aggressive industrial fluids on mats, thereby maintaining their
effectiveness longer.
CHEMICAL RESISTANCE GUIDE cont...
Chemical
Form
Chemical Family
Iodine
IRM 902
IRM 903
Jet Fuel
Kerosene
Lacquers
Linoleic Acid
Linseed Oil
Methane
Methyl Alcohol (methanol)
Methyl Ethyl Ketone (MEK)
Methyl Formate
Methyl Isobutyl Ketone (MIBK)
Methyl Methacrylate
Methylene Chloride
Mineral Oil
Mineral Spirits
Motor Oil 10w-30 (natural)
Motor Oil 10w-30(synthetic)
Napathenic
Naptha
Nitric Acid
Nitric Acid
Nitrobenzene
Octane
Oleic Acid
Oxalic Acid
Peanut Oil
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Inorganic Halogenated Compound
Napathenic Oil
Napathenic Oil
Aromatic HC
Aliphatic HC
Aromatic HC (with alcohol)
Fatty Acid
Fatty Acid
Aliphatic HC
Alcohol
Ketone
Alcohol
Ketone
Ester
Aliphatic HC (halogenated)
Petroleum HC
Aliphatic HC
Paraffin Oil
Paraffin Oil
Aromatic HC
Aromatic HC
Acid (strong)
Acid (strong)
Aromatic HC
Aliphatic HC
Acid
Acid (weak)
Fatty Acid
Pentane
Perchloroethylene
Petroleum
Phosphoric Acid
Pine Oil
Pine Oil
Potassium Hydroxide
Power Steering Fluid
Propane
Propyl Alcohol (propanol)
Propylene Dichloride
Salt Water
Silicates
Silver Nitrate
Sodium Bicarbonate
Sodium Hydroxide
Sodium Hydroxide
Sodium Hypochlorite (bleach)
Stearic Acid
Styrene
Sulfuric Acid
Sulfuric Acid
Sulfuric Acid
Tetrahydrofuran (THF)
Toluene (methyl benzene)
Transmission Fluid
Trinitrobenzene
Turpentine
Vegetable Oil
Vinegar
Xylene
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Solid
Solid
Solid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Liquid
Aliphatic HC
Aliphatic HC (chlorinated)
Aliphatic HC
Acid (weak)
Turpene/Alcohol/Ether
LEGEND:
1 = Recommended
2 = Suitable for Use
Base (strong)
Napathenic Oil
Aliphatic HC
Alcohol
Aliphatic HC
Alkali Metals
Inorganic Salt
Inorganic Salt
Base (strong)
Base (strong)
Base
Fatty Acid
Aromatic HC
Acid (strong)
Acid (strong)
Acid (strong)
Ether
Aromatic HC
Napatheic or Paraffin Oil
Aromatic HC
Aliphatic HC
Aliphatic HC
Aromatic HC
Art. 480
Concentration
Concentrated
20%
100%
20%=Pine-Sol
50%
0.34% = Mr. Clean
10-75%
Concentrated
<10%
5% Acetic Acid
Art. 470
Art. 745
Art. 545
Art. 556
Art. 550
Art. 562BL
Art. 563BL
Art. 045
Art.667S
Art. 656SFR
Art. 746
Art. 750
Art. 751
Art. 752
Art. 753
Art. 832
4
4
4
4
4
4
4
4
4
1
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
4
4
4
4
2
4
3
2
4
4
1
4
1
1
1
1
2
1
1
3
4
3
4
2
4
4
4
4
4
4
3
4
Art. 556RS
Art. 550RD
Art. 562RD
Art. 563RD
Art. 563BU
Art. 750RS
Art.411
Art. 422
Art. 419
Art. 406
Art. 413
Art. 417
Art. 825
Art. 827
Art.979
Art. 479
Art. 478
Art. 737
Art. 826
Art. 830
Art. 520
Art. 522
Art. 520HD
Art. 522HD
Art. 920HD
Art. 922HD
Art. 451
Art. 450
Art. 663S2
3
2
2
1
1
4
2
1
1
1
4
3
4
4
4
1
2
1
1
1
1
4
4
4
1
2
2
2
3
2
2
1
1
4
2
1
1
1
4
3
4
4
4
1
2
2
2
1
1
4
4
4
1
2
2
2
1
n/a
n/a
3
3
4
--2
2
1
4
3
4
1
4
3
3
2
2
--2
2
2
4
2
3
2
1
1
n/a
n/a
3
3
4
--2
2
1
4
3
4
1
4
3
3
2
2
--2
2
2
4
2
3
2
1
1
n/a
n/a
3
3
4
--2
2
1
4
3
4
1
4
3
3
2
2
--2
2
2
4
2
3
2
1
4
2
2
3
2
4
--1
3
4
4
4
4
4
4
1
2
2
2
3
3
4
4
4
4
2
3
2
2
4
4
4
4
4
4
3
4
1
2
2
2
4
3
4
4
4
4
4
4
2
1
2
4
3
1
4
1
2
1
3
3
2
2
1
1
1
4
1
1
2
1
2
1
1
1
4
4
4
2
4
3
1
4
1
1
1
4
1
2
1
3
4
2
2
2
1
1
4
1
1
2
1
2
1
1
1
4
4
4
2
4
3
1
4
1
2
1
4
2
3
2
1
4
3
1
2
1
2
4
1
1
1
1
2
1
1
2
4
1
4
1
4
4
2
4
4
1
1
4
2
3
2
1
4
3
1
2
1
2
4
1
1
1
1
2
1
1
2
4
1
4
1
4
4
2
4
4
1
1
4
2
3
2
1
4
3
1
2
1
2
4
1
1
1
1
2
1
1
2
4
1
4
1
4
4
2
4
4
1
1
4
4
4
2
4
2
1
3
--2
4
4
1
1
1
1
3
1
4
1
3
4
4
2
3
4
1
--4
1
3
4
4
4
4
1
4
4
1
4
4
1
4
1
2
1
1
1
1
2
2
4
2
3
2
4
4
4
4
4
4
1
4
Art.549
Art.543
Art.580
Art. 746GR
Art. 410
Art. 856SFR
Art.661S
Art.665S
Art.650SFR
Art.662S
Art.850SFR
4
4
4
4
4
4
4
4
4
1
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
4
3
2
2
1
1
4
2
1
1
1
4
3
4
4
4
1
2
1
1
1
1
4
4
4
1
2
2
2
4
4
4
2
4
3
2
4
4
1
4
1
1
1
1
2
1
1
3
4
3
4
2
4
4
4
4
4
4
3
4
1
2
1
3
3
2
2
1
1
1
4
1
1
2
1
2
1
1
1
4
4
4
2
4
3
1
4
1
1
1
4
Use of product in environments specified as "USEABLE, NOT RECOMMENDED" or "NOT RECOMMENDED" may lead
to product failure and will void warranty.
These ratings are intended to be used as a guide only. For decisive results, please call for a free product sample for onsite testing in actual conditions.
Actual results may vary depending on concentration of chemicals. Ratings for products 470, 478, 479, 480, 979 refer to
top surface.
Art. 420
3 = Useable, not recommended
4 = Not Recommended NB: Under all circumstances regular cleaning is strongly recommended for hygienic/safety reasons and to reduce the
effects of abrasion or aggressive industrial fluids on mats, thereby maintaining their effectiveness longer.
CLEANING & MAINTENANCE
Rollable Primary
Matting Systems
Smartscraper and Frameworks
Daily:
Vacuum clean
Weekly:
Removal of grit, etc. and vacuum clean. Removal of
chewing gum
Monthly:
Removal of large grit, etc. and vacuum clean. Cleaning
of matwell: - roll up mat and extract dirt / grid from under
the mat. Check retainer screws at all 4 corners of mat
and replace mat after cleaning making sure retainer
screws are secure.
Periodically: Removal of large grit, etc.+ vacuum
clean. Cleaning of matwell by roll up the mat and extract
dirt grid from under the mat. Check retainer screws and
replace mat after cleaning making sure retainer screws
are secure. Accumulating dirt underneath the mats may
undermine the structure of the mat.
Cleaning frequency is subject to amount of traffic,
surroundings and weather conditions.
Modular Primary Matting Systems
of chewing gum*
Monthly: Remove large grit from the mat well by
vacuum cleaning. Thoroughly clean mat well: - Take
modules up and extract dirt / grit from under the mat.
Replace modules in exact order they came out.
Periodically: Removal of large grit, etc. + vacuum
clean. Cleaning of matwell: - Take up modules extract
dirt / grit from under the mat. Check sub floor is sound
and replace modules in exact place where they were
found. We also recommend that a periodic deep clean
using hot water extraction is used to remove deep set
dirt within the mat. (Specialist cleaning firms can be
recommended just call our sales office on 08456010431
for more information).
Cleaning frequency is subject to amount of traffic,
surroundings and weather conditions.
Gridmaster Matting, if made in a square or rectangular
shape can be reversed from time to time this will double
the life expectancy of the product.
*NB:- removal of chewing gum is best using a
proprietory gum removal gel such as that from fleetlight
tel:- 02084667848.
Maintenance Specification for Mat.Works Entrance Carpets and Carpet Tiles
To maximise the entrance carpet’s aesthetic appeal, performance and life expectancy, it is imperative to ensure at the
specification stage that:
1. Carpets will be protected from other site activities during installation and thereafter.
2. Clients understand the enclosed information and that they accept responsibility for correct carpet care. (Mat.Works
will provide a copy of the Cleaning and Maintenance guide to the end-users address when requested.)
General Cleaning - Daily vacuuming with a rotary brush vacuum cleaner, preferably with an adjustable head,
is recommended. It is essential to remove all loose soil daily because if left to build up, the particles of dirt are much
harder to remove and are more damaging to the yarn structure, thereby decreasing the life of the carpet.
Entrance Areas are prone to higher traffic levels and higher levels of dirt and moisture. This means that the
maintenance program for entrance matting should be more frequent than for general carpeting areas, a ratio of 2
entrance cleans to 1 carpet clean is a general good guide for preventative periodical maintenance.
Depending on the level of trafficking, the carpet should be periodically deep cleaned using high performance hot
water extraction equipment. In certain circumstances, for instance excessively stained carpet the cleaning
professional may consider a combination between rotary brush and extraction equipment to give improved results.
Rotary brush cleaning by itself is not recommended.
A reputable contract cleaner should be used, preferably NCCA registered (for NCCA details telephone 0116 271
9550). It is important that the carpet is deep cleaned at least once a year.
Stain Removal - It is essential to deal with spillages immediately and any subsequent stains as appropriate.
In the event of a spillage, immediately blot with a clean absorbent cloth until there is no further transfer from
the carpet to the cloth. If any further stain remains or has otherwise been allowed to dry, the method will vary
accordingly.
58
Cleaning solutions and methods
Daily: Vacuum clean
Weekly: Removal of grit, etc. vacuum clean. Removal
FACT : Mat.Works has achieved ISO9001:
It is recognised that particularly for
contract situations, if stains are not
dealt with immediately, cleaning
staff may not be in a position to
identify the type of stain. A good
quality, multi-purpose stain
remover is therefore very useful,
although it must be understood
that this will not successfully
tackle all types of stains, and
wherever possible the chart
recommendations should be
strictly adhered to (see right). Also
any stains left over a period of
time become increasingly more
difficult to remove and may require
several treatments.
Alcoholic beverages
Baby or animal stains
Blood (wet)
Coffee, tea chocolate
Minerals and Fruit juices
Water based paint
Food
Fountain pen ink
Vomit
A
Shoe polish
B
A
Oil based paint or varnish
Butter and other greases
Cooking oils and other oils
Ointment
Metal polish
Tar
Cream, ice-cream and milk
All inks except fountain pen ink B
Dried blood
D
Chewing gum
Blu-tack
Plasticine
E
C
In all cases after stain removal the
carpet should be allowed to dry
completely and then cleaned with
a rotary brush vacuum cleaner.
A
A liquid detergent such as Granwax spot/stain remover, in accordance
with manufacturers instructions.
Granwax tel no: 01773 541177
Solvent cleaning of bitumen
backed tiles should preferably be
avoided. Where this is not
possible, extra caution should be
taken and only very light surface
cleaning should take place.
B
A dry solvent spotter such
as Prochem solvall.
Special Cases Cigarette burns – it is
recommended that these are
punched out and replaced by
a professional carpet fitter.
Major spillages – seek
professional advice from a
member of the NCCA.
If any of the treatment lists are not
successful, seek professional help.
The methods are based upon
experience and are recommended
in good faith. However, we cannot
accept responsibility for their use
in any specific case.
C
Methylated spirits
Method: Moisten a cloth with the
appropriate solvent an dab onto
the stain. Carry on using alternate
moist and dry cloths until no further stain transfer. Finally, cover
the damp area with a thick wad of
dry cloths, cover with something
heavy and leave for several hours
D
A paste made with biological washing powder mixed to use as little water
as possible.
Method: Moisten stain with warm water and cover with the paste. Keep
moist for approximately 2 hours. Sponge with clean warm water and blot
with an absorbent cloth.
E
Scrape off the excess with a blunt edged knife. Use proprietary chewing
gum remover. Contact Granwax for advice.
Granwax tel no. 01773 541177
2000 and ISO14001 Accreditation
59
ACCESSORIES
NOTES
Description:
Mat.Works frames are available in aluminum and brass, and are designed to anchor into sand and cement screeds
for secure site installation. All frames are custom built to fit specific site requirements, with curved shapes available to
special order.
The recommended Mat.Works depth is 19mm for all products except 12mm. For these products we recommend a
matwell with 14mm depth.
Mat.Works frames are supplied in kit form for ease of transport, storage and on-site assembly.
Ramped frames & surface
mounted installations
RAMP SEcTion
76mm
......................................................................................................................................................................................
......................................................................................................................................................................................
......................................................................................................................................................................................
T-Bars
Internal and external ramp frames are supplied mitred
and drilled. The surface is ribbed for enhanced grip.
(ARF 70 must be used with Grid)
......................................................................................................................................................................................
Mat.Works T-Bars provide separation between modules
to facilitate easy removal for cleaning and reversibility.
Tuftiguard T Bars are available in aluminum, brass or
PVC and in all PVC colours except Doubloon. Grid TBars are available in aluminium. Please note that T-Bars
are automatically included in each order.
17.5mm height must be used with Grid.
......................................................................................................................................................................................
......................................................................................................................................................................................
......................................................................................................................................................................................
......................................................................................................................................................................................
17mm
17mm
RAMP 17MM
Ramping
profiles for
surface mounted
installations
RMP 17mm (Aluminium)
50mm
14mm
......................................................................................................................................................................................
T-BAR 17MM
RMP 12mm (Aluminium)
T-BAR 13MM
T-Bar Profiles for all depths of mats
SMS FRAME
Smart Scraper Framing
Gridmaster 17mm
Frame.Works 17mm
25mm
Mat.Works has a number of
framing options to choose from
depending on the type of
matting selected. Select the
type of frame relevant to the
mats as listed below the frame.
When specifying use the
product code listed by the
diagram.
......................................................................................................................................................................................
FRAME 25MM
25mm
......................................................................................................................................................................................
25mm
18mm
FLFRA 18MM
Flexible framing for
shaped mats of all depths
2mm
13mm
......................................................................................................................................................................................
......................................................................................................................................................................................
25mm
2mm
......................................................................................................................................................................................
16mm
1mm
Framing Options
......................................................................................................................................................................................
......................................................................................................................................................................................
3mm
25mm
5mm
......................................................................................................................................................................................
......................................................................................................................................................................................
17mm
RAMP 12MM
12mm
17mm
3mm
3mm
FLFRA 13MM
Flexible framing for
shaped mats of all depths
......................................................................................................................................................................................
......................................................................................................................................................................................
1mm
......................................................................................................................................................................................
1mm
Frameworks, 12mm Clip
Frameworks, 17 & 20mm Clip
......................................................................................................................................................................................
......................................................................................................................................................................................
Smartscraper
Clip
......................................................................................................................................................................................
......................................................................................................................................................................................
60
FACT : Mat.Works has achieved ISO9001:
2000 and ISO14001 Accreditation
61
QUOTE FORM
QUOTE FORM
1: Draw your area
2: Specify your products
3: Fax to 01709 763813
1: Draw your area
2: Specify your products
3: Fax to 01709 763813
Product 1:
Colour
Product 5:
Sqm
Product 2:
Colour
Sqm
Your Details:
62
Colour
Sqm
Product 7:
Sqm
Product 4:
Colour
Sqm
Product 6:
Product 3:
Colour
Colour
Colour
Sqm
Product 8:
Sqm
Colour
Sqm
Your Details:
63
NFLOORCOVERINGS
ATIONAL
Mat.Works is a Division of National Floorcoverings Ltd,
the UK’s leading manufacturer of commercial floor coverings.
Commercial Entrance Matting
Health & Safety Specialists
ISO 14001 Accredited
ISO 9001:2000 Accredited
Disability Act Specialist
A Division of National Floorcoverings Ltd.
Farfield Park, Manvers,
Wath-upon-Dearne, Rotherham S63 5DB
T: +44 (0) 1709 763 839 F: +44 (0) 1709 763 813
email: [email protected]
www.mat-works.co.uk
Samples Department
T: +44 (0) 1709 763 805

mat.works - Robert Kirk | Flooring Distributor

Transcription

Similar documents

Treadlock™ Mats

DOLLAMUR SPORt SURFACES PROUd tO bE thE OFFICIAL MAt

Buy Octagon Mat With Mat Dimensions

IMPACT! - Dollamur

Greenhams Abattoirs

Transmission Construction.indd

CS Group – Pedimat Ultra - Syncros: Entrance Matting Systems

Elle Magazine 1996 - TriBeCa Plastic Surgery

Here - Cow Mats – Gym Mats

BIOCOVERS