Whirlwind Building Components Electronic Catalog

Transcription

Whirlwind Building Components Electronic Catalog
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Buildings Systems | Whirlwind Building Components
PO BOX 75280 | HOUSTON, TX 77234-5280 | 8234 HANSEN ROAD (77075-1089)
Phone: (713) 946-7140 | Fax: (832) 553-4992| US Wats: (800) 324-9992
COMPONENTS CATALOG
www.whirlwindsteel.com
Company
Profile
Commercial/
Industrial
Standing Seam/
Architectural
Agricultural/
Residential
Technical
Information
Certifications/
MISC
Company
Profile
Back to
Contents
COMPANY PROFILE
Whirlwind Building Components manufacturers a complete line of metal building components, including metal
roofing, wall panels, accessories and trim for the commercial, industrial, architectural, agricultural, residential,
municipal and self storage markets. Products are offered in a variety of gauges, colors, and warranties including
Energy Star certified colors, wind and hail listings.
With over 50 years experience, and plant locations in 4 states, Whirlwind is committed to provide customers with
the highest quality building components at the lowest possible prices, with exceptional customer service. Today,
Whirlwind is a privately held company with over 350 employees and averages $118 Million in annual sales.
Whirlwind is currently in the following markets: West, Midwest, Upper Midwest, ,South, Southeastern and
Southwestern United States.
HOUSTON, TEXAS
8234 HANSEN ROAD
HOUSTON, TX 77075-1002
PHONE:
713-946-7140
U.S. WATS:
800-324-9992
FAX:
832-553-4700
LITHIA SPRINGS, GEORGIA
2175 SWEETWATER INDUSTRIAL BLVD.
LITHIA SPRINGS, GA 30122-2879
PHONE:
770-739-8339
U.S. WATS:
800-363-8142
FAX:
770-739-1226
CLAREMORE, OKLAHOMA
2450 E.L. ANDERSON BLVD.
CLAREMORE, OK 740017-2122
PHONE:
918-343-1973
U.S. WATS:
877-875-0077
FAX:
918-343-7114
FREEPORT, MINNESOTA
500 WHIRLWIND DRIVE
FREEPORT, MN 56331
PHONE:
320-836-7200
U.S. WATS:
888-836-7203
FAX:
320-836-7201
EMAIL:
WEBSITE:
[email protected]
www.WhirlwindSteel.com
CP-1
HOUSTON, TX - PLANT LOCATION
TO
I-59
NO
RTH
LUF
KIN
TO DALLAS
I-45 NORTH
8234 HANSEN RD. / HOUSTON, TX 77075 / (713) 946-7140
NORTH
I-610
I-10 WEST
NORTH
LOOP
I-10 EAST
ONT
TO BEAUM
EAST LOOP
I-610
I-610
WEST LOOP
TO SAN ANTONIO
AIRPORT BLVD.
COLLEGE AVE.
EXIT
I-610
A
RI
CT
O
VI
TALLEY HO
TO
I-5
9S
OU
TH
SOUTH LOOP
AI
RP
OR
T
I-4
5
HANSEN RD.
TH
MOSLEY
I-4
5
ON
ST
MONROE RD.
OU
CP-2
E
LV
BUILDING
COMPONENTS
GA
Y
BB T
HO POR
AIR
5S
TO
I-4
BLVD.
SCRANTON
ENLARGEMENT OF
AIRPORT BLVD. EXIT
LITHIA SPRINGS, GA - PLANT LOCATION
2175 SWEETWATER INDUSTRIAL BLVD. / LITHIA SPRINGS, GA 30122-2879 / (770) 739-8339
ENLARGEMENT OF
LEE ROAD EXIT
EET
WA
TER
NORTH
BLVD.
H
SWEETWATER
INDUSTRIAL BLVD.
Y
19
I- 8
5N
OR
O
5N
RT
H
LE,
SC
IL
NV
EE
TO
TH
N
TA
AT
CH
GR
N
,T
GA
OO
BUILDING
COMPONENTS
W
I-7
TO
LEE ROAD
SW
I-20
ATLANTA
I-20 WEST
LITHIA
SPRINGS
TO BIRMINGHAM, AL
I-2
85
P2
O
LO
LEE ROAD
EXIT
I- 8
5
AU
0E
AS
T
GU
STA
,G
U
SO
TO
TO
TH
,
ON
A
GA
AC
M
LAG
H
UT
SO
A
I-75
E, G
NG
RA
TO
CP-3
CLAREMORE, OK - PLANT LOCATION
2450 E.L. ANDERSON BLVD. / CLAREMORE, OK 74017-2122 / (918) 343-1973
ENLARGEMENT OF
NORTH SIDE OF
CLAREMORE, OK
66
NORTH
BUILDING
COMPONENTS
H WY
N. INDUSTRIAL BLVD.
E.
ANL.
DER
SON
LOWRY ROAD
BLUE STARR DR.
U.S. 75
U.S. 16 9
CLAREMORE
CLAREMORE
OWASSO
Y6
HW
6
I-4
4
AIRPORT
H WY
11
CATOOSA
TULSA
U .S. 412
I-244
U .S
. 64
HW
Y5
1
SAPULPA
CP-4
JENKS
U .S . 1
69
H WY 64
U .S
. 75
H WY 11 7
I-4 4
BROKEN ARROW
FREEPORT, MN - PLANT LOCATION
277th St.
CR-11
500 WHIRLWIND DRIVE / FREEPORT, MN 56331-0007 / (320) 836-7200
385th St.
NORTH
166
285th St.
CR-
BUILDING
COMPONENTS
CR-167
lwind
Whir
Drive
CR-39
t. SW
7th S
.N
ve
tA
1s
NW
Ave
.
3rd
TO M
ELRO
SE
94
2nd
Ave
.
2nd
3rd
St.
St.
St.
Ave
.
SE
SE
NE
Av
e.
SW
2nd
2nd
3rd
St.
157
NW
2nd
CR
E
ve N
7th A
Rimcrest Road
1st Ave. S
7th St. SW
CR
9th St. SE
157
94
TO
AL
BA
NY
CP-5
Commercial/
Industrial
Back to
Contents
TABLE OF CONTENTS
Commercial / Industrial Products
Product
Page
General Information ............................................................................................................................................................................ CI-1
Monarch / Monarch X, Super Span / Super Span X, Low Rib / Low Rib X (36” coverage) ........................................ CI-2 – CI-3
Cor-Span / Cor-Span X (32” coverage) ................................................................................................................................ CI-4 – CI-5
7.2 Rib (36” coverage) ............................................................................................................................................................ CI-6 – CI-7
7.2N Rib (28.8” coverage) ...................................................................................................................................................... CI-8 – CI-9
Trim
Shadow Gutter, Gutter Strap, Box Gutter, Gutter Counter Flashing, Gutter End Caps ........................................... CI-10 – CI-12
ShadowRake Trim, Box Rake Trim, Rake End Caps ..................................................................................................... CI-12 – CI-14
Shadow Corner Box, Shadow Peak Box, Box Peak Box ............................................................................................ CI-14 – CI-15
Simple Eave Trim, Eave Drip Trim, High Side Shadow Eave Trim, High Side Box Eave Trim
Low Shadow Eave Trim, Sculptured High Side Eave Trim .......................................................................................... CI-15 – CI-16
Downspout, Downspout Straps, Downspout Elbow, Pig Spout, Scupper ............................................................... CI-16 – CI-17
Outside Corner Trim, Monarch Outside Corner Trim, Inside Corner Trim ................................................................ CI-17 – CI-18
Jamb Trim, Head Trim, Cap Trim ..................................................................................................................................... CI-19 – CI-20
Transition Trim ................................................................................................................................................................... CI-20 – CI-21
Soffit Trim ............................................................................................................................................................................................ CI-21
UL580 Skylight Reinforcement Trim .............................................................................................................................................. CI-21
Slide Door Hood Trim, Slide Door Hood Flashing ........................................................................................................ CI-21 – CI-22
2” x 2” Angle Trim, 3” x 3” Angle Trim, 4” x 4” Angle Trim ........................................................................................................ CI-22
Hip Trim, Valley Trim ........................................................................................................................................................................ CI-23
Base Trim ........................................................................................................................................................................................... CI-23
Ridge Roll Trim, Die-Formed Ridge Caps ..................................................................................................................................... CI-24
Flat Trim Sheets ................................................................................................................................................................................ CI-24
Special Trim ...................................................................................................................................................................................... CI-25
Accessories
Fasteners, Concrete Nail-Ins, Wedge Anchors, Pop Rivets ......................................................................................... CI-27 – CI-32
Drill Bits, Scockets, Screw Gun, Pop Rivet Tool, Personnel Door Canopy Kit ....................................................................... CI-32
Vents, Vent Hardware, Steel Louvers ............................................................................................................................ CI-33 – CI-34
Tape Sealant, Tube Caulk, Closure Strips, Hi-Acrylic Closure Tape, Pannel Support Trim .................................. CI-35 – CI-36
Slide Door Track and Hardware .................................................................................................................................................... CI-36
Vinyl Insulation, Poultry Netting, Insulation Tape ....................................................................................................................... CI-37
Touch-Up Paint ................................................................................................................................................................................. CI-37
Rubber Pipe Flashing, Roof Curbs, Die-Formed Flashing .......................................................................................................... CI-38
Galvanized EHS Strand Cable, Galvanized EHS Brace Grips,
Eye Bolts with Nuts and Flat Wahser, Hillside Washer .............................................................................................. CI-39 – CI-40
A325 High Strength Structural Bolts, A194 Nuts, A307 Low Carbon Bolts
USS Flat Washers, A563 Grade A Hex Nuts ................................................................................................................. CI-40 – CI-41
Personnel Door Canopies, Personnel Door Units, Personnel Door Hardware ..................................................................... CI-42
Horizontal Slide Windows, Vertical Slide Windows, Fixed Glass Slimline Windows ........................................................... CI-43
Light Transmitting Panels, Stainless Grommets .............................................................................................................................CI-44
TABLE OF CONTENTS
Commercial / Industrial Products
Product
Page
Structural Members and Structural Shapes
Hat Sections, Sub-Girts, Channel Section ................................................................................................................................... CI-45
Zees ....................................................................................................................................................................................... CI-46 – CI-47
Cees ...................................................................................................................................................................................... CI-48 – CI-49
Eave Struts ........................................................................................................................................................................... CI-50 – CI-52
Open Channels ................................................................................................................................................................................. CI-53
Angles ................................................................................................................................................................................................ CI-54
Custom Structural Shapes ............................................................................................................................................................. CI-55
Connection Clips .................................................................................................................................................................. CI-56 – CI61
Structural Hot-Rolled Members, Square Tubing, Round Tubing ................................................................................. CI-52 – CI-63
Brace Rods ....................................................................................................................................................................................... CI-63
GENERAL INFORMATION
Commercial/Industrial Product Line - General Information
With over 50 year’s experience, Whirlwind is a quality manufacturer of metal roofing, siding, accessories, and trim
for the Commercial and Industrial markets. We currently carry six C/I panels; Super Span(X), Low Rib(X), CorSpan(X), 7.2 Rib, 7.2N Rib, and Monarch(X). They are offered in a variety of SMP colors with warranties up to 40
years, as well as Kynar colors with 35 year warranties. In addition Whirlwind also offers energy star approved and
CRRC approved colors. All of Whirlwind’s material contains a minimum of 32% up to 59% recycled content making
Whirlwind’s material environmentally friendly.
Sample Commercial/Industrial Projects:
Strippable film is available on flat trim sheets and
the Weather Lok-16, Weather Snap-16, Accent
11, Shadow Wall-18, and Weather Guard Panels.
Please see those sections for further details and
pricing.
Panel Pricing Notes for all C/I products:
1.
2.
3.
4.
5.
6.
7.
8.
CI-1
All 24 gauge painted panels have a KYNAR 500® finish.
Availability of 24 and 26 gauge KYNAR 500® Colors is limited to those shown on the current Component Commercial/
Industrial Color Chart (see this section for details).
Availability of 22 gauge material must be confirmed at the time of the order to avoid possible delays.
Length tolerance is plus or minus ¼” of ordered length on all profiles.
Yield strength is 80,000 PSI on 29 and 26 gauge panels; 50,000 PSI on 24 and 22 gauge panels.
Galvanized panels are in conformance with ASTM A653, Grade 80, Coating Class G90 if bare, and Coating Class G60 if
painted.
GALVALUME® base metal is in conformance with ASTM A792 Grade 80, Coating Class AZ55 if bare, and Coating
Class AZ50 if painted. 24 gauge and 22 gauge are Grade 50.
Clear acrylic-coated GALVALUME® is GALVALUME® coated with a thin acrylic film intended to increase its
resistance to fingerprinting and handling marks and eliminate the use of oil in the forming process. It is not a
warranted film and may discolor while weathering.
C/I PANEL PRICING
#/6%2!'%
#/6%2!'%
052,)."%!2).'
,%'&/2
350%230!.8
/.,9
052,)."%!2).'
,%'&/2
,/72)"8
/.,9
Ð
v
b
,/72)",/72)"8
LOW
RIB / LOW RIB X
350%230!.350%230!.8
SUPER
SPAN / SUPER SPANX
b
!$$g,-!4%2)!,
&/2-/.!2#(8
/.,9
#/6%2!'%
MONARCH / MONARCH X
FINISH
BASE METAL
GAUGE
WEIGHT
PER SQUARE
Clear Acrylic
GALVALUME®
29
74
SMP Standard Colors
GALVALUME®
29
74
Clear Acrylic
GALVALUME®
26
95
Commodity Colors
GALV/GLUM
26
98
POL Polar White
GALVALUME®
26
95
SMP Standard Colors
GALVALUME®
26
95
KYNAR 500 Colors
®
GALVALUME
26
95
Clear Acrylic
GALVALUME®
24
121
KYNAR 500 Colors
®
GALVALUME
24
121
Clear Acrylic
GALVALUME®
22
153
®
22
153
®
®
POL Polar White
GALVALUME
PRICE PER
SQUARE
PRICE PER LFT
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Panel pricing is based on a 38¼” panel width.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
4. For factory applied UL Labels (UL2218 Impact and UL Class A Fire) labels, add $1.00 per panel (Super Span only).
5. 26 gauge perforated panels (13% open) are available only in POL Polar White “X” profiles with G90 galvanized base metal. Add $69.45 per square.
6. 26 gauge panels are available only in Super Span X, Low Rib X, and Monarch X profiles except Commodity Colors.
7. 26 gauge Commodity Colors are not available with the extended purlin bearing leg.
8. 26 gauge and 29 gauge Monarch or Monarch X panels may “oil-can”. Oil-canning is not a cause for rejection. Installation of material constitutes acceptance.
9. 24 gauge and 22 gauge panels are available only in Super Span X, Low Rib X, and Monarch X profiles.
10. 29 gauge panels are not available with the extended purlin bearing leg.
PACKAGE PRICING:
1. Maximum 3000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap...........................................................................$14.50 (up to 15’-0”)
$26.25 (over 15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ..........................$16.50 (up to 15’-0”)
$29.25 (over 15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap .............$29.25 (up to 15’-0”)
$54.00 (over 15’-0”)
5. LTL Crating........................................................................................................................................$4.50 per lineal foot ($75.00 minimum)
6. Please consult your salesperson for special packaging pricing.
®
CI-2
C/I PANEL SQUARE FOOTAGE CHART
• SUPER SPAN / SUPER SPAN X
• LOW RIB / LOW RIB X
• MONARCH / MONARCH X
NUMBER OF SQUARE FEET PER PANEL - BASED ON 38¼” WIDE PANEL COVERING 36”
FT
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
CI-3
0”
3.19
6.38
9.56
12.75
15.94
19.13
22.31
25.50
28.69
31.88
35.06
38.25
41.44
44.63
47.81
51.00
54.19
57.38
60.56
63.75
66.94
70.13
73.31
76.50
79.69
82.88
86.06
89.25
92.44
95.63
98.81
102.00
105.19
108.38
111.56
114.94
117.94
121.13
124.31
127.50
1”
3.45
6.64
9.83
13.02
16.20
19.39
22.56
25.77
28.95
32.14
35.33
38.52
41.70
44.89
48.08
51.27
54.45
57.64
60.83
64.02
67.20
70.39
73.58
76.77
79.95
83.14
86.33
89.52
92.70
95.89
99.08
102.27
104.45
108.45
111.83
115.02
118.20
121.39
124.58
127.77
2”
3.72
6.91
10.09
13.28
16.47
19.66
22.84
26.03
29.22
32.41
35.59
38.78
41.97
45.16
48.34
51.53
54.72
57.91
61.09
64.28
67.47
70.66
73.84
77.03
80.22
83.41
86.59
89.78
92.97
96.16
99.34
102.53
105.72
108.91
112.09
115.28
118.47
121.66
124.84
128.03
3”
3.98
7.17
10.36
13.55
16.73
19.92
23.11
26.30
29.48
32.67
35.86
39.05
42.23
45.42
48.61
51.80
54.98
58.17
61.36
64.55
67.73
70.92
74.11
77.30
80.48
83.67
86.86
90.50
93.23
96.42
99.61
102.80
105.98
109.17
112.36
115.55
118.73
121.92
125.11
128.30
4”
4.25
7.44
10.63
13.81
17.00
20.19
23.38
26.56
29.75
32.94
36.13
39.31
42.50
45.69
48.88
52.06
55.25
58.44
61.63
64.81
68.00
71.19
74.38
77.56
80.75
83.94
87.13
90.31
93.50
96.69
99.88
103.06
106.25
109.44
112.63
115.81
119.00
122.19
125.38
128.56
5”
4.52
7.70
10.89
14.08
17.27
20.45
23.64
26.83
30.02
33.20
36.39
39.58
42.77
45.95
49.14
52.33
55.52
58.70
61.89
65.08
68.27
71.45
74.64
77.83
81.02
84.20
87.39
90.58
93.77
96.95
100.14
103.33
106.52
109.70
112.89
116.08
119.27
122.45
125.64
128.83
6”
4.78
7.97
11.16
14.34
17.53
20.72
23.91
27.09
30.28
33.47
36.66
39.84
43.03
46.22
49.41
52.59
55.78
58.97
62.16
65.34
68.53
71.72
74.91
78.09
81.28
84.47
87.66
90.84
94.03
97.22
100.41
103.59
106.78
109.97
113.16
116.34
119.53
122.72
125.91
129.09
7”
5.05
8.23
11.42
14.61
17.80
20.98
24.17
27.36
30.55
33.73
36.92
40.11
43.30
46.48
49.67
52.86
56.05
59.23
62.42
65.61
68.80
71.98
75.17
78.36
81.55
84.73
87.92
91.11
94.30
97.48
100.67
103.86
107.05
110.23
113.42
116.61
119.80
122.98
126.17
129.36
8”
5.31
8.50
11.69
14.88
18.06
21.25
24.44
27.63
30.81
34.00
37.19
40.38
43.56
46.75
49.94
53.13
56.31
59.50
62.69
65.88
69.06
72.25
75.44
78.63
81.81
85.00
88.19
91.38
94.56
97.75
100.94
104.13
107.91
110.50
113.69
116.88
120.06
123.25
126.44
129.63
9”
5.58
8.77
11.95
15.14
18.33
21.52
24.70
27.89
31.08
34.27
37.45
40.64
43.83
47.02
50.20
53.39
56.58
59.77
62.95
66.14
69.33
72.52
75.70
78.89
82.08
85.27
88.45
91.64
94.83
98.02
101.20
104.39
107.58
110.77
113.95
117.14
120.33
123.52
126.70
129.89
10”
5.84
9.03
12.22
15.41
18.59
21.78
24.97
28.16
31.34
34.53
37.72
40.91
44.09
47.28
50.47
53.66
56.84
60.03
63.22
66.41
69.59
72.78
75.97
79.16
82.34
85.53
88.72
91.91
95.09
98.28
101.47
104.66
107.84
111.03
114.22
117.41
120.59
123.78
126.97
130.16
11”
6.11
9.30
12.48
15.67
18.86
22.05
25.23
28.42
31.61
34.80
37.98
41.17
44.36
47.55
50.73
53.92
57.11
60.30
63.48
66.67
69.86
73.05
76.23
79.42
82.61
85.80
88.98
92.17
95.36
98.55
101.73
104.92
108.11
111.30
114.48
117.67
120.86
124.05
127.23
130.42
C/I PANEL PRICING
32" COVERAGE
PURLIN BEARING
LEG FOR
COR-SPAN X
ONLY
7
⁄8"
2.67"
COR-SPAN / COR-SPAN X
FINISH
BASE METAL
GAUGE
WEIGHT
PER SQUARE
Clear Acrylic
GALVALUME®
29
83
SMP Standard Colors
GALVALUME
®
29
83
Clear Acrylic
GALVALUME®
26
107
Commodity Colors
GALV/GLUM
26
112
®
26
107
®
26
107
KYNAR 500 Colors
®
GALVALUME
26
107
Clear Acrylic
GALVALUME®
24
136
KYNAR 500® Colors
GALVALUME®
24
136
Clear Acrylic
GALVALUME®
22
172
®
22
172
POL Polar White
SMP Standard Colors
®
POL Polar White
GALVALUME
GALVALUME
GALVALUME
PRICE PER
SQUARE
PRICE PER LFT.
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Panel pricing is based on a 34” panel width.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. Add $25.00 set-up charge for quantities less than 2 squares.
4. For factory applied UL Labels (UL2218 Impact and UL Class A Fire) labels, add $1.00 per panel.
5. 26 gauge perforated panels (13% open) are available only in POL Polar White Cor-Span X with G90 galvanized base metal. Add $78.50 per square.
6 26 gauge panels are available only in Cor-Span X except Commodity Colors.
7. 26 gauge Commodity Colors are not available with the extended purlin bearing leg.
8. 24 gauge and 22 gauge panels are available only in Cor-Span X.
9. 29 gauge and 22 gauge panels are not available with the extended purlin bearing leg.
PACKAGE PRICING:
1. Maximum 3000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap...........................................................................$14.50 (up to 15’-0”)
$26.25 (over 15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ..........................$16.50 (up to 15’-0”)
$29.25 (over 15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap .............$29.25 (up to 15’-0”)
$54.00 (over 15’-0”)
5. LTL Crating........................................................................................................................................$4.50 per lineal foot ($75.00 minimum)
6. Please consult your salesperson for special packaging pricing.
®
CI-4
C/I PANEL SQUARE FOOTAGE CHART
• COR-SPAN / COR-SPAN X
NUMBER OF SQUARE FEET PER PANEL - BASED ON 34” WIDE PANEL COVERING 32”
CI-5
FT
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
2.83
5.67
8.50
11.33
14.17
17.00
19.83
22.67
25.50
28.33
31.17
34.00
36.83
39.67
42.50
45.33
48.17
51.00
53.83
56.67
59.50
62.33
65.17
68.00
70.83
73.67
76.50
79.33
82.17
85.00
87.83
90.67
93.50
96.33
99.17
102.00
104.83
107.67
110.50
113.33
2.83
5.67
8.50
11.33
14.17
17.00
19.83
22.67
25.50
28.33
31.17
34.00
36.83
39.67
42.50
45.33
48.17
51.00
53.83
56.67
59.50
62.33
65.17
68.00
70.83
73.67
76.50
79.33
82.17
85.00
87.83
90.67
93.50
96.33
99.17
102.00
104.83
107.67
110.50
113.33
2.83
5.67
8.50
11.33
14.17
17.00
19.83
22.67
25.50
28.33
31.17
34.00
36.83
39.67
42.50
45.33
48.17
51.00
53.83
56.67
59.50
62.33
65.17
68.00
70.83
73.67
76.50
79.33
82.17
85.00
87.83
90.67
93.50
96.33
99.17
102.00
104.83
107.67
110.50
113.33
2.83
5.67
8.50
11.33
14.17
17.00
19.83
22.67
25.50
28.33
31.17
34.00
36.83
39.67
42.50
45.33
48.17
51.00
53.83
56.67
59.50
62.33
65.17
68.00
70.83
73.67
76.50
79.33
82.17
85.00
87.83
90.67
93.50
96.33
99.17
102.00
104.83
107.67
110.50
113.33
3.78
6.61
9.44
12.28
15.11
17.94
20.78
23.61
26.44
29.28
32.11
34.94
37.78
40.61
43.44
46.28
49.11
51.94
54.78
57.61
60.44
63.28
66.11
68.94
71.78
74.61
77.44
80.28
83.11
85.94
88.78
91.61
94.44
97.28
100.11
102.94
105.78
108.61
111.44
114.28
4.01
6.85
9.68
12.51
15.35
18.18
21.01
23.85
26.68
29.51
32.35
35.18
38.01
40.85
43.68
46.51
49.35
52.18
55.01
57.85
60.68
63.51
66.35
69.18
72.01
74.85
77.68
80.51
83.35
86.18
89.01
91.85
94.68
97.51
100.35
103.18
106.01
108.85
111.68
114.51
4.25
7.08
9.92
12.75
15.58
18.42
21.25
24.08
26.92
29.75
32.58
35.42
38.25
41.08
43.92
46.75
49.58
52.42
55.25
58.08
60.92
63.75
66.58
69.42
72.25
75.08
77.92
80.75
83.58
86.42
89.25
92.08
94.92
97.75
100.58
103.42
106.25
109.08
111.92
114.75
4.49
7.32
10.15
12.99
15.82
18.65
21.49
24.32
27.15
29.99
32.82
35.65
38.49
41.32
44.15
46.99
49.82
52.65
55.49
58.32
61.15
63.99
66.82
69.65
72.49
75.32
78.15
80.99
83.82
86.65
89.48
92.32
95.15
97.98
100.82
103.65
106.48
109.32
112.15
114.98
4.72
7.56
10.39
13.22
16.06
18.89
21.72
24.56
27.39
30.22
33.05
35.89
38.72
41.56
44.39
47.22
50.06
52.89
55.72
58.55
61.39
64.22
67.05
69.89
72.72
75.55
78.39
81.22
84.05
86.89
89.72
92.55
95.39
98.22
101.05
103.89
106.72
109.55
112.39
115.22
4.96
7.79
10.62
13.46
16.29
19.12
21.96
24.79
27.62
30.46
33.29
36.12
38.96
41.79
44.62
47.46
50.29
53.12
55.96
58.79
61.62
64.46
67.29
70.12
72.96
75.79
78.62
81.46
84.29
87.12
89.96
92.79
95.62
98.46
101.29
104.12
106.96
109.79
112.62
115.46
5.19
8.03
10.86
13.69
16.53
19.36
22.19
25.03
27.86
30.69
33.53
36.36
39.19
42.03
44.86
47.69
50.53
53.36
56.19
59.03
61.86
64.69
67.53
70.36
73.19
76.03
78.86
81.69
84.53
87.36
90.19
93.03
95.86
98.69
101.53
104.36
107.19
110.03
112.86
115.69
5.43
8.26
11.10
13.93
16.76
19.60
22.43
25.26
28.10
30.93
33.76
36.60
39.43
42.26
45.10
47.93
50.76
53.60
56.43
59.26
62.10
64.93
67.76
70.60
73.43
76.26
79.10
81.93
84.76
87.60
90.43
93.26
96.10
98.93
101.76
104.60
107.43
110.26
113.10
115.93
C/I PANEL PRICING
36”
7.2”
1.5”
7.2 RIB
FINISH
BASE METAL
GAUGE
WEIGHT
PER SQUARE
Clear Acrylic
GALVALUME®
29
69
*SMP Standard Colors
GALVALUME®
29
69
* Clear Acrylic
GALVALUME®
26
89
®
26
89
150 SQ
* SMP Standard Colors
®
GALVALUME
26
89
150 SQ
Clear Acrylic
GALVALUME®
24
111
* KYNAR 500® Polar White
GALVALUME®
24
111
150 SQ
Clear Acrylic
GALVALUME®
22
140
200 SQ
®
22
140
200 SQ
* POL Polar White
POL Polar White
GALVALUME
GALVALUME
PRICE PER
SQUARE
PRICE PER LFT.
MINIMUM
ORDER
150 SQ
*Check availability of stock inventory.
PANEL PRICING NOTES:
1. Panel pricing is based on a 39” panel width.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
4. For factory applied UL Labels (UL2218 Impact, UL Class A Fire, and UL90 Uplift Resistance) labels, add $1.00 per panel.
PACKAGE PRICING:
1. Maximum 3000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ......................................................................$14.50 (up to 15’-0”) $26.25 (over 15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ......................$16.50 (up to 15’-0”) $29.25 (over 15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap .........$29.25 (up to 15’-0”) $54.00 (over 15’-0”)
5. LTL Crating .................................................................................................................................$4.50 per lineal foot ($75.00 minimum)
6. Please consult your salesperson for special packaging pricing.
®
CI-6
C/I PANEL SQUARE FOOTAGE CHART
• 7.2 RIB
NUMBER OF SQUARE FEET PER PANEL - BASED ON 39” WIDE PANEL COVERING 36”
FT
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
CI-7
0”
3.25
6.50
9.75
13.00
16.25
19.50
22.75
26.00
29.25
32.50
35.75
39.00
42.25
45.50
48.75
52.00
55.25
58.50
61.75
65.00
68.25
71.50
74.75
78.00
81.25
84.50
87.75
91.00
94.25
97.50
100.75
104.00
107.25
110.50
113.75
117.00
120.25
123.50
126.75
130.00
1”
3.52
6.77
10.02
13.27
16.52
19.77
23.02
26.27
29.52
32.77
36.02
39.27
42.52
45.77
49.02
52.27
55.52
58.77
62.02
65.27
68.52
71.77
75.02
78.27
81.52
84.77
88.02
91.27
94.52
97.77
101.02
104.27
107.52
110.77
114.02
117.27
120.52
123.77
127.02
130.27
2”
3.79
7.04
10.29
13.54
16.79
20.04
23.29
26.54
29.79
33.04
36.29
39.54
42.79
46.04
49.29
52.54
55.79
59.04
62.29
65.54
68.79
72.04
75.29
78.54
81.79
85.04
88.29
91.54
94.79
98.04
101.29
104.54
107.79
111.04
114.29
117.54
120.79
124.04
127.29
130.54
3”
4.06
7.31
10.56
13.81
17.06
20.31
23.56
26.81
30.06
33.31
36.56
39.81
43.06
46.31
49.56
52.81
56.06
59.31
62.56
65.81
69.06
72.31
75.56
78.81
82.06
85.31
88.56
91.81
95.06
98.31
101.56
104.81
108.06
111.31
114.56
117.81
121.06
124.31
127.56
130.81
4”
4.33
7.58
10.83
14.08
17.33
20.58
23.83
27.08
30.33
33.58
36.83
40.08
43.33
46.58
49.83
53.08
56.33
59.58
62.83
66.08
69.33
72.58
75.83
79.08
82.33
85.58
88.83
92.08
95.33
98.58
101.83
105.08
108.33
111.58
114.83
118.08
121.33
124.58
127.83
131.08
5”
4.60
7.85
11.10
14.35
17.60
20.85
24.10
27.35
30.60
33.85
37.10
40.35
43.60
46.85
50.10
53.35
56.60
59.85
63.10
66.35
69.60
72.85
76.10
79.35
82.60
85.85
89.10
92.35
95.60
98.85
102.10
105.35
108.60
111.85
115.10
118.35
121.60
124.85
128.10
131.35
6”
4.88
8.13
11.38
14.63
17.88
21.13
24.38
27.63
30.88
34.13
37.38
40.63
43.88
47.13
50.38
53.63
56.88
60.13
63.38
66.63
69.88
73.13
76.38
79.63
82.88
86.13
89.38
92.63
95.88
99.13
102.38
105.63
108.88
112.13
115.38
118.63
121.88
125.13
128.38
131.63
7”
5.15
8.40
11.65
14.90
18.15
21.40
24.65
27.90
31.15
34.40
37.65
40.90
44.15
47.40
50.65
53.90
57.15
60.40
63.65
66.90
70.15
73.40
76.65
79.90
83.15
86.40
89.65
92.90
96.15
99.40
102.65
105.90
109.15
112.40
115.65
118.90
122.15
125.40
128.65
131.90
8”
5.42
8.67
11.92
15.17
18.42
21.67
24.92
28.17
31.42
34.67
37.92
41.17
44.42
47.67
50.92
54.17
57.42
60.67
63.92
67.17
70.42
73.67
76.92
80.17
83.42
86.67
89.92
93.17
96.42
99.67
102.92
106.17
109.42
112.67
115.92
119.17
122.42
125.67
128.92
132.17
9”
5.69
8.94
12.19
15.44
18.69
21.94
25.19
28.44
31.69
34.94
38.19
41.44
44.69
47.94
51.19
54.44
57.69
60.94
64.19
67.44
70.69
73.94
77.19
80.44
83.69
86.94
90.19
93.44
96.69
99.94
103.19
106.44
109.69
112.94
116.19
119.44
122.69
125.94
129.19
132.44
10”
5.96
9.21
12.46
15.71
18.96
22.21
25.46
28.71
31.96
35.21
38.46
41.71
44.96
48.21
51.46
54.71
57.96
61.21
64.46
67.71
70.96
74.21
77.46
80.71
83.96
87.21
90.46
93.71
96.96
100.21
103.46
106.71
109.96
113.21
116.46
119.71
122.96
126.21
129.46
132.71
11”
6.23
9.48
12.73
15.98
19.23
22.48
25.73
28.98
32.23
35.48
38.73
41.98
45.23
48.48
51.73
54.98
58.23
61.48
64.73
67.98
71.23
74.48
77.73
80.98
84.23
87.48
90.73
93.98
97.23
100.48
103.73
106.98
110.23
113.48
116.73
119.98
123.23
126.48
129.73
132.98
C/I PANEL PRICING
28.8”
7.2”
1.5”
7.2N RIB
FINISH
BASE METAL
GAUGE
WEIGHT
PER SQUARE
Clear Acrylic
GALVALUME®
26
100
GALVALUME
®
26
104
GALVALUME
®
26
104
KYNAR 500 Colors
®
GALVALUME
26
104
Clear Acrylic
GALVALUME®
24
126
KYNAR 500® Colors
GALVALUME®
24
130
Clear Acrylic
GALVALUME®
22
160
®
22
165
POL Polar White
SMP Standard Colors
®
POL Polar White
GALVALUME
PRICE PER
SQUARE
PRICE PER LFT.
MINIMUM
ORDER
200 SQ
PANEL PRICING NOTES:
1. Panel pricing is based on a 32¼” panel width.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
4. For factory applied UL Labels (UL2218 Impact, UL Class A Fire, and UL90 Uplift Resistance) labels, add $1.00 per panel.
PACKAGE PRICING:
1. Maximum 3000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ......................................................................$14.50 (up to 15’-0”) $26.25 (over 15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ......................$16.50 (up to 15’-0”) $29.25 (over 15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap .........$29.25 (up to 15’-0”) $54.00 (over 15’-0”)
5. LTL Crating .................................................................................................................................$4.50 per lineal foot ($75.00 minimum)
6. Please consult your salesperson for special packaging pricing.
CI-8
C/I PANEL SQUARE FOOTAGE CHART
• 7.2N RIB
NUMBER OF SQUARE FEET PER PANEL - BASED ON 32.25” WIDE PANEL COVERING 28.8”
FT
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
CI-9
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
2.69
5.38
8.06
10.75
13.44
16.13
18.81
21.50
24.19
26.88
29.56
32.25
34.94
37.63
40.31
43.00
45.69
48.38
51.06
53.75
56.44
59.13
61.81
64.50
67.19
69.88
72.56
75.25
77.94
80.63
83.31
86.00
88.69
91.38
94.06
96.75
99.44
102.13
104.81
107.50
2.91
5.60
8.29
10.97
13.66
16.35
19.04
21.72
24.41
27.10
29.79
32.47
35.16
37.85
40.54
43.22
45.91
48.60
51.29
53.97
56.66
59.35
62.04
64.72
67.41
70.10
72.79
75.47
78.16
80.85
83.54
86.22
88.91
91.60
94.29
96.97
99.66
102.35
105.04
107.72
3.14
5.82
8.51
11.20
13.89
16.57
19.26
21.95
24.64
27.32
30.01
32.70
35.39
38.07
40.76
43.45
46.14
48.82
51.51
54.20
56.89
59.57
62.26
64.95
67.64
70.32
73.01
75.70
78.39
81.07
83.76
86.45
89.14
91.82
94.51
97.20
99.89
102.57
105.26
107.95
3.36
6.05
8.73
11.42
14.11
16.80
19.48
22.17
24.86
27.55
30.23
32.92
35.61
38.30
40.98
43.67
46.36
49.05
51.73
54.42
57.11
59.80
62.48
65.17
67.86
70.55
73.23
75.92
78.61
81.30
83.98
86.67
89.36
92.05
94.73
97.42
100.11
102.80
105.48
108.17
3.58
6.27
8.96
11.65
14.33
17.02
19.71
22.40
25.08
27.77
30.46
33.15
35.83
38.52
41.21
43.90
46.58
49.27
51.96
54.65
57.33
60.02
62.71
65.40
68.08
70.77
73.46
76.15
78.83
81.52
84.21
86.90
89.58
92.27
94.96
97.65
100.33
103.02
105.71
108.40
3.81
6.49
9.18
11.87
14.56
17.24
19.93
22.62
25.31
27.99
30.68
33.37
36.06
38.74
41.43
44.12
46.81
49.49
52.18
54.87
57.56
60.24
62.93
65.62
68.31
70.99
73.68
76.37
79.06
81.74
84.43
87.12
89.81
92.49
95.18
97.87
100.56
103.24
105.93
108.62
4.03
6.72
9.41
12.09
14.78
17.47
20.16
22.84
25.53
28.22
30.91
33.59
36.28
38.97
41.66
44.34
47.03
49.72
52.41
55.09
57.78
60.47
63.16
65.84
68.53
71.22
73.91
76.59
79.28
81.97
84.66
87.34
90.03
92.72
95.41
98.09
100.78
103.47
106.16
108.84
4.26
6.94
9.63
12.32
15.01
17.69
20.38
23.07
25.76
28.44
31.13
33.82
36.51
39.19
41.88
44.57
47.26
49.94
52.63
55.32
58.01
60.69
63.38
66.07
68.76
71.44
74.13
76.82
79.51
82.19
84.88
87.57
90.26
92.94
95.63
98.32
101.01
103.69
106.38
109.07
4.48
7.17
9.85
12.54
15.23
17.92
20.60
23.29
25.98
28.67
31.35
34.04
36.73
39.42
42.10
44.79
47.48
50.17
52.85
55.54
58.23
60.92
63.60
66.29
68.98
71.67
74.35
77.04
79.73
82.42
85.10
87.79
90.48
93.17
95.85
98.54
101.23
103.92
106.60
109.29
4.70
7.39
10.08
12.77
15.45
18.14
20.83
23.52
26.20
28.89
31.58
34.27
36.95
39.64
42.33
45.02
47.70
50.39
53.08
55.77
58.45
61.14
63.83
66.52
69.20
71.89
74.58
77.27
79.95
82.64
85.33
88.02
90.70
93.39
96.08
98.77
101.45
104.14
106.83
109.52
4.93
7.61
10.30
12.99
15.68
18.36
21.05
23.74
26.43
29.11
31.80
34.49
37.18
39.86
42.55
45.24
47.93
50.61
53.30
55.99
58.68
61.36
64.05
66.74
69.43
72.11
74.80
77.49
80.18
82.86
85.55
88.24
90.93
93.61
96.30
98.99
101.68
104.36
107.05
109.74
5.15
7.84
10.53
13.21
15.90
18.59
21.28
23.96
26.65
29.34
32.03
34.71
37.40
40.09
42.78
45.46
48.15
50.84
53.53
56.21
58.90
61.59
64.28
66.96
69.65
72.34
75.03
77.71
80.40
83.09
85.78
88.46
91.15
93.84
96.53
99.21
101.90
104.59
107.28
109.96
C/I TRIM
SHADOW GUTTER
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./FT.
50GU12_^
20’-3”
26
20½”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
GU-12
6±
1 1
1
11 411 4 2 4 1 4
1
4
1
11 41
4
4
Color
Use with Super Span/Super Span X. Specify roof slope when ordering.
EAVE GUTTER ~ ½ - 4:12 ROOF SLOPE
FL-18B
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL18B^
20’-3”
26
23”
1.4#
PRICE PER FOOT
GALVALUME®
SMP COLOR
—PLUS
ROOFSLOPE
#OLOR
EAVE GUTTER ~ 41⁄8 - 6:12 ROOF SLOPE
FL-18J
For Super SpanX roof panel. Matches Trim FL-18 & FL-18B. Specify roof slope when ordering.
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL18J^
20’-3”
26
231⁄2”
1.5#
PRICE PER FOOT
GALVALUME®
SMP COLOR
—PLUS
ROOFSLOPE
#OLOR
EAVE GUTTER ~ ½ - 4:12 ROOF SLOPE
FL-18D
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL18D^
20’-3”
26
201⁄4”
1.2#
PRICE PER FOOT
GALVALUME®
SMP COLOR
—MINUS
ROOFSLOPE
Ð
For Super SpanX roof panel. Matches Trim FL-18H & FL-18J. Specify roof slope when
ordering.
—PLUS
ROOFSLOPE
#OLOR
EAVE GUTTER ~ 41⁄8 - 6:12 ROOF SLOPE
FL-18G
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL18G^
20’-3”
26
203⁄4”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
—MINUS
ROOFSLOPE
Ð
For Super SpanX roof panel. Matches Trim FL-18C & FL-18D. Specify roof slope when ordering.
#OLOR
—PLUS
ROOFSLOPE
For Super SpanX roof panel. Matches trim FL-18F and FL-18G. Specify roof slope when ordering.
CI-10
C/I TRIM
GUTTER STRAP
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./EA.
50GS121^
0’-9
26
51⁄8”
0.2#
50GS122^
1’-4
26
51⁄8”
0.4#
PRICE PER EACH
GALVALUME®
SMP COLOR
GS-121
GS-122
g '3
g '3
Use with 100 and 120 Series Gutter.
SHADOW GUTTER
1¼
1¼ 1¼ 2¼ 1¼
GU-32_
1¼ 1¼
4
Color
GUTTER STRAP
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./FT.
50GU32_^
20’-3
26
201⁄2”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
Use with 7.2 Rib roof panel. Specify roof slope when ordering.
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./EA.
50GS321^
0’-9
26
53⁄16”
0.2#
50GS322^
1’-4
26
53⁄16”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./FT.
50GU80_^
20’-3”
26
20½”
1.3#
PRICE PER EACH
GALVALUME®
SMP COLOR
GS-321
GS-322
g '3
g '3
Use with 7.2 Rib roof panel.
BOX GUTTER
PRICE PER FOOT
SMP COLOR

GU-80_
#OLOR

Specify roof slope when ordering.
GUTTER COUNTER FLASHING
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./FT.
50GC10_^
15’-3”
26
57⁄8”
0.4#
PRICE PER FOOT
GC-10_
b

#OLOR
Specify roof slope when ordering.
CI-11
GALVALUME®
GALVALUME®
SMP COLOR
C/I TRIM
GUTTER END CAPS
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA.
50BEC^
N/A
26
N/A
0.2#
50EC12_^
N/A
26
N/A
0.2#
50EC32_^
N/A
26
N/A
0.2#
PRICE PER EACH
GALVALUME®
SMP COLOR
BEC (BOX)
Box
EC-12_
EC-32_
Shadow
Specify roof slope when ordering.
GUTTER END CAP
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL18A^
N/A
26
N/A
0.3#
PRICE PER EACH
GALVALUME®
SMP COLOR
FL-18A
For Gutter FL-18B, FL-18J, FL-18D, or FL-18G. Specify roof slope when ordering.
SHADOW RAKE TRIM
RT-101
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50RT101^
20’-3”
26
18½”
1.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50RT320^
20’-3”
26
183⁄8”
1.2#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
  

ITEM
NUMBER

SHADOW RAKE TRIM
PRICE PER FOOT
GALVALUME®
SMP COLOR
RT-320
    
#OLOR
 
Use with 7.2 Rib Roof Panel.
CI-12
C/I TRIM
BOX RAKE TRIM
RT-801
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50RT801^
20’-3”
26
201⁄4”
1.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT330^
20’-3”
26
201⁄8”
1.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL16^
20’-3”
26
201⁄4”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR

Ð

#OLOR
BOX RAKE TRIM
RT-330
PRICE PER FOOT
GALVALUME®
SMP COLOR

Ð
#OLOR
Use with 7.2 Rib roof panel.
RAKE TRIM
FL-16
PRICE PER FOOT
GALVALUME®
SMP COLOR

#OLOR

Ð
For Super Span roof panel. Matches trim FL-16, and FL-16D.
RAKE END
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL16A^
N/A
26
N/A
0.2#
PRICE PER EACH
FL-16A
CI-13
GALVALUME®
SMP COLOR
C/I TRIM
RAKE END CAPS
SRECR (RIGHT)
SRECL (LEFT)
SREC
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./EA.
50SRECR^
N/A
26
N/A
0.2#
50SRECL^
N/A
26
N/A
0.2#
50BREC^
N/A
26
N/A
0.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./EA.
50SCB^
N/A
26
N/A
0.7#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL16C^
N/A
26
N/A
1.5#
50FL16E^
N/A
26
N/A
3.0#
PRICE PER EACH
GALVALUME®
SMP COLOR
For Shadow Rake.
BREC
For Box Rake.
BREC
SHADOW CORNER BOX
PRICE PER EACH
GALVALUME®
SMP COLOR
SCB
CORNER BOX
FL-16C (Standard)
FL-16E (High Side)
PRICE PER EACH
GALVALUME®
SMP COLOR
For Rake FL-16. Specify roof slope when ordering.
SHADOW PEAK BOX
SPB_
72PB_
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50SPB_L^
50SPB_N^
N/A
26
N/A
2.0#
N/A
2.0#
PRICE PER EACH
GALVALUME®
SMP COLOR
Use with Super SpanX Rib roof. Specify roof slope when ordering.
5072PB_L^
5072PB_N^
Specify with or without Whirlwind Logo.
BOX TRIM PEAK BOX
BPB_
72BPB_
N/A
26
Use with 7.2 Rib roof. Specify roof slope when ordering.
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50BPB_L^
50BPB_N^
N/A
26
N/A
1.6#
N/A
1.6#
PRICE PER EACH
GALVALUME®
SMP COLOR
Use with Super Span roof. Specify roof slope when ordering.
5072BPB_L^
5072BPB_N^
Specify with or without Whirlwind Logo.
N/A
26
Use with 7.2 Rib roof. Specify roof slope when ordering.
CI-14
C/I TRIM
PEAK BOX
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL16B^
N/A
26
N/A
3.0#
PRICE PER EACH
GALVALUME®
SMP COLOR
FL-16B
Specify with or without Whirlwind Logo.
SIMPLE EAVE TRIM
ET-80_
For Rake FL-16. Specify roof slope when ordering.
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50ET80_^
20’-3”
26
10¼”
0.6#
PRICE PER FOOT
GALVALUME®
SMP COLOR

#OLOR
Specify roof slope when ordering.
EAVE DRIP TRIM
ET-70_
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50ET70_^
20’-3”
26
9¼”
0.6#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
Specify roof slope when ordering.
HIGH SIDE SHADOW EAVE TRIM
ET-15_
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50ET15_^
20’-3”
26
1613⁄16”
1.1#
SMP COLOR

   
#OLOR
Specify roof slope when ordering.
HIGH SIDE BOX EAVE TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50ET85_^
20’-3”
26
20½”
1.3#

Ð
#OLOR
CI-15
PRICE PER FOOT
GALVALUME®
b
 
ET-85_
ITEM
NUMBER
Specify roof slope when ordering.
PRICE PER FOOT
GALVALUME®
SMP COLOR
C/I TRIM
LOW SIDE SHADOW EAVE TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
GALVALUME®
50ET10_^
20’-3”
26
14¼”
1.0#
4.10
PRICE PER FOOT
SMP COLOR
ET-10_
Ð

  
4.55
#OLOR
 
Specify roof slope when ordering.
LOW SIDE SHADOW EAVE TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
GALVALUME®
50ET32_^
20’-3”
26
1315⁄16”
0.9#
3.57
PRICE PER FOOT
SMP COLOR
ET-32_
6¾
1
1¼
2¼ 1¼
3.96
Color
1 1¼
Use with 7.2 Rib roof panel. Specify roof slope when ordering.
SCULPTURED HIGH SIDE EAVE
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF.
50FL17^
20’-3”
26
203⁄4”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
FL-17
8”
4”
2”
5.67
6.32
4”
13/4”
12
Color
Matches trim FL-17 and FL-17A. Specify roof slope when ordering.
DOWNSPOUT
DS-101
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./FT.
20’-3”
26
1613⁄16”
1.1#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
50DS101^
5.41
6.00
,ENGTH
50DS101^N
+ICKOUT
IFREQgD
Specify with or without kickout.
CI-16
C/I TRIM
DOWNSPOUT STRAPS
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./EA.
50DS105^
N/A
26
N/A
0.1#
N/A
26
N/A
0.1#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./EA.
50DS120^
N/A
26
1613⁄16”
2.0#
50DS121^
N/A
26
1613⁄16”
2.0#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WT./EA.
50PSS102^
N/A
26
1613⁄16”
0.9#
50RR101^
N/A
26
N/A
0.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50CT102^
20’-3”
26
141⁄4”
1.0#
127⁄8”
0.8#
PRICE PER EACH
GALVALUME®
SMP COLOR
21⁄8
DS-105
Color
41⁄8
DS-105
All panel types.
DS-202
1
413⁄16
1
50DS202^
Color
41⁄8
Low Rib walls.
DOWNSPOUT ELBOW
PRICE PER EACH
GALVALUME®
SMP COLOR
DS-120
DS-121
,OCKFOR
$3
#OLOR
,OCKFOR
$3
g
—
g
PIG SPOUT AND SCUPPER
PRICE PER EACH
GALVALUME®
SMP COLOR
511⁄16
4
PSS-102
135°
4
Color
⁄
6
11 1
5
RR-101
OUTSIDE CORNER TRIM
CT-102
CT-201
PRICE PER FOOT
#OLOR


Can be used for Super Span, Cor Span, or Low Rib panels.
50CT201^
Low Rib or Cor Span panels.
CI-17
20’-3”
26
GALVALUME®
SMP COLOR
C/I TRIM
MONARCH OUTSIDE CORNER TRIM
CT-302
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50CT302^
20’-3”
26
105⁄16”
0.6#
26
71⁄8”
0.5#
PRICE PER FOOT
GALVALUME®
SMP COLOR
2
2
1
Color
1
1 piece required at each corner.
MT-815
¾
Color
1
50MT815^
27⁄8
17
20’-3”
⁄16
2 pieces required at each corner. Use with CT-302.
OUTSIDE CORNER TRIM
CT-320
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50CT320^
20’-3”
26
15”
1.0#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50ICT801^
20’-3”
26
141⁄4”
1.0#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
Use with 7.2 Rib wall panel.
INSIDE CORNER TRIM
ICT-801
PRICE PER FOOT
GALVALUME®
SMP COLOR


#OLOR
Can be used with Super Span, Cor-Span, or Low Rib Panels.
INSIDE CORNER TRIM
ICT-320
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50ICT320^
20’-3”
N/A
15”
1.0#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
Use with 7.2 Rib wall panel.
CI-18
C/I TRIM
JAMB AND HEAD TRIM
(WHIRLWIND BUILDING SYSTEMS TYPE)
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50HT101^
20’-3”
26
47⁄8”
0.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
HT-101 - 11⁄2”
HT-202 - 1”
HT-303 - 13⁄4”
1¼
Can be used for Super Span, Low Rib, or Monarch panels.
50HT202^
20’-3”
26
47⁄8”
0.3#
20’-3”
26
51⁄8”
0.3#
20’-3”
26
4 7 ⁄8 ”
0.3#
1½
*
Color
Low Rib or Cor-Span panels.
Head
50HT303^
7.2 Rib panels only.
3
JT-101 - 1 ⁄8”
50JT101^
JT-202 - 1”
JT-303 - 15⁄8”
Can be used for Super Span, Low Rib, or Monarch panels.
1
Color
20’-3”
26
47⁄8”
0.3#
20’-3”
26
51⁄8”
0.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50HT320^
20’-3”
26
6”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL26^
20’-3”
26
5 5 ⁄8 ”
0.4#
*
13⁄8
50JT202^
Low Rib or Cor-Span panels.
Jamb
50JT303^
*(1¾” on HT-303 & 15⁄8” on JT-303)
*(1” on HT-202 & 7⁄8” on JT-202)
Low Rib or Cor-Span panels.
HEAD TRIM
PRICE PER FOOT
GALVALUME®
SMP COLOR
HT-320
Ð

Use with 7.2 Rib roof panel.
HEAD TRIM
PRICE PER FOOT

FL-26
#OLOR
CI-19
b
Matches trim FL-24, FL-25, FL-26, FL-26-B, and FL-26C.
GALVALUME®
SMP COLOR
C/I TRIM
HEAD TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL514^
20’-3”
26
5”
0.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
1
21 2
FL-514
Color
1
For Low Rib. Matches trim FL-514, FL-514A, and FL-514B.
JAMB TRIM
JT-330
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50JT330^
20’-3”
26
51⁄2”
0.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT113^
20’-3”
26
71⁄8”
0.5#
20’-3”
26
6”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT313^
20’-3”
26
73⁄8”
0.5#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT101^
20’-3”
26
105⁄16”
0.7#
PRICE PER FOOT
GALVALUME®
SMP COLOR
Use with 7.2 Rib roof panel.
CAP TRIM
MT-113
PRICE PER FOOT
GALVALUME®
SMP COLOR
13⁄8
2
Color
Super Span panels.
MT-212
7
Color
⁄8
2
50MT212^
Low Rib panels.
CAP TRIM
MT-313
PRICE PER FOOT
GALVALUME®
SMP COLOR
b

Use with 7.2 Rib roof panel.
TRANSITION TRIM
MT-101
PRICE PER FOOT
SMP COLOR
#OLOR
b
b
GALVALUME®
CI-20
C/I TRIM
TRANSITION TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT321^
20’-3”
26
145⁄8”
0.9#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT70_^
20’-3”
26
141⁄4”
1.0#
PRICE PER FOOT
GALVALUME®
SMP COLOR
MT-321
#OLOR
Use with 7.2 Rib roof panel.
TRANSITION TRIM
PRICE PER FOOT
GALVALUME®
SMP COLOR
MT-70
Ð
#OLOR
Specify roof slope when ordering.
SOFFIT TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WEIGHT
50CF116^103
10’-3”
26
47⁄8”
3.1#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WEIGHT
50MT125^
10’-6”
26
71⁄8”
4.7#
PRICE PER EACH
GALVALUME®
SMP COLOR
CF-116
b
b
#OLOR

UL580 CLASS 90
SKYLIGHT REINFORCEMENT TRIM
PRICE PER EACH
GALVALUME®
WHITE
SMP COLOR
MT-125
#OLOR

b
Also used for insulation support around skylights.
SLIDE DOOR HOOD TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50SD102^
20’-3”
26
141⁄4”
1.0#
PRICE PER FOOT
b

SD-102
b
#OLOR
%ND#AP
,INE
End caps for SD-102 are $16.13 ea. 50SDECL^ and 50SDECR^.
CI-21
GALVALUME®
SMP COLOR
C/I TRIM
SLIDE DOOR HOOD FLASHING
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50SD103^
20’-3”
26
57⁄8”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT822^
20’-3”
26
5”
0.3#
50MT722^
20’-3”
26
5”
0.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT833^
20’-3”
26
7”
0.4#
50MT733^
20’-3”
26
7”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50MT844^
20’-3”
26
9”
0.6#
50MT744^
20’-3”
26
9”
0.6#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
b
Ð
SD-103
ITEM
NUMBER

2” X 2” ANGLE TRIM
MT-822
PRICE PER FOOT
GALVALUME®
SMP COLOR
2
Color
2
2
MT-722
Color
2
MT-833
3” X 3” ANGLE TRIM
PRICE PER FOOT
GALVALUME®
SMP COLOR
3
Color
3
3
MT-733
Color
3
4” X 4” ANGLE TRIM
PRICE PER FOOT
GALVALUME®
SMP COLOR
MT-844
4
Color
4
4
MT-744
Color
4
CI-22
C/I TRIM
HIP TRIM
HF-120
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50HF120^
20’-3”
26
141⁄4”
1.0#
PRICE PER FOOT
GALVALUME®
SMP COLOR
b
b
#OLOR
3PECIFYANGLE
INDEGREES
VALLEY TRIM
3PECIFYANGLE
INDEGREES
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50VF120^
20’-3”
26
201⁄2”
1.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
#OLOR
VF-120
Bevel angle in degrees and must be specified (see CI-27).
Ð
Ð
Bevel angle in degrees must be specified (see CI-27).
STANDARD BASE TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50BT101^
20’-3”
26
47⁄8”
0.3#
PRICE PER FOOT
GALVALUME®
SMP COLOR
BT-101
#OLOR
Use with base angle and/or base channel.
STANDARD BASE TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50BT102^
20’-3”
26
12”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
50FL72^
20’-3”
26
6 1 ⁄8 ”
0.4#
PRICE PER FOOT
GALVALUME®
SMP COLOR
BT-102
b
#OLOR
Use with base girt.
BASE TRIM
PRICE PER FOOT
FL-72
b

#OLOR
Ð
CI-23
GALVALUME®
SMP COLOR
C/I TRIM
RIDGE ROLL TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
50MT80_^
12’-3”
PRICE PER FOOT
GAUGE
GIRTH
WEIGHT
26
201⁄2”
1.3#
GALVALUME®
SMP COLOR
MT-80_
Ð
Ð
#OLOR
Specify roof slope when ordering.
Ridge Roll Skid $25.00
LTL Skid $50.00
Maximum 100 pieces per skid.
DIE-FORMED RIDGE CAP
ITEM
NUMBER
GAUGE
COVERAGE
LENGTH
50SSRC^27
26
36”
2’-7”
6.8#
26
36”
2’-7”
6.8#
26
36”
3’-0”
7.9#
26
36”
3’-0”
7.9#
WT./EA.
PRICE PER EACH
GALVALUME®
WHITE
SMP COLOR
50SSRC27
Super Span
Super Span
50LRRC27
Low Rib
50LRRC^27
Low Rib
50SSRC30
Super Span
50SSRC^
50LRRC30
Super Span
g g
OR
Low Rib
50LRRC^
#OVERAGE
Low Rib
LENGTH
GAUGE
WIDTH
WT./
EA.
Acrylic-Coated Galvalume
10’-0”
26
413⁄8”
25.7#
Poly Polar White
10’-0”
26
413⁄8”
26.3#
SMP Colors
10’-0”
26
413⁄8”
26.4#
KYNAR Colors
10’-0”
26
413⁄8”
26.4#
Acrylic-Coated Galvalume
10’-0”
24
42¾”
34.0#
KYNAR Colors
10’-0”
24
42¾”
35.0#
Acrylic-Coated Galvalume
10’-0”
22
42¾”
44.0#
Acrylic-Coated Galvalume
10’-0”
22
48”
49.0#
Poly Polar White
10’-0”
22
42¾”
44.3#
FLAT TRIM SHEETS
(ASTM A792, GRADE 50 MATERIAL)
LTL Skid $25.00
Super Span ridge cap shown.
Maximum roof slope is 7:12.
&LAT3HEET3KID5PTOg^
,4,3KID
&OR0ROTECTIVE-ASKING&ILM
!DDPER3HEET
FINISH
1-10
PRICE PER EACH
11-50
51+
CI-24
C/I TRIM
SPECIAL TRIM PRICING
The following formula is used to calculate the Price per Foot of special trim:
Girth of Material x Price per Inch of Girth + Price per Number of Breaks
Price per Inch of Girth:
29 gauge (all standard colors/finishes) ~
26 gauge (all standard colors/finishes) ~
24 gauge (all standard colors/finishes) ~
22 gauge (Polar White or Galvalume Plus® only) ~
Price per Break (hem equals two breaks): $0.10
1. All trim to be 26 gauge material unless noted otherwise.
2. Prices do not include standard packaging. Add appropriate packaging charges.
3. All short lengths will be charged as a 5’-0” minimum length.
4. A $15.00 set-up charge will be added for tapered trim - No Exceptions. Drawings must be furnished by customer and be “shop ready”.
5. Customer sketch of special trim must be in Whirlwind’s possession before order can be processed.
6. Specify which side of trim has the finish color.
7. If more than one special trim is required number them SF1, SF2, SF3, etc.
8. Special trim parts such as corner boxes, peak boxes, etc. will be priced at $47.50 each (all gauges).
TRIM PACKAGING
CI-25
1.
Standard Kraft paper wrap ~ $0.52 per lineal foot ($5.20 minimum).
2.
Heavy cardboard box with angles ~ $25.00.
3.
LTL - Cardboard box with wooden blocks and metal bands ~ $4.50 per lineal foot ($45.00 minimum).
C/I TRIM
ANGLE CHART FOR ROOF LINE TRIM
Hip
Valley
Ridge
Gutter
Transition
Inside
ROOF SLOPE
1:12
2:12
3:12
4:12
5:12
6:12
7:12
8:12
9:12
10:12
11:12
12:12
HIP
173°
166°
160°
154°
148°
143°
138°
133°
129°
126°
123°
120°
VALLEY
117°
113°
110°
107°
104°
102°
99°
97°
95°
93°
92°
90°
RIDGE
170°
161°
152°
143°
135°
127°
120°
113°
106°
100°
95°
90°
GUTTER AND TRANSITION
94°
99°
104°
108°
112°
116°
120°
123°
126°
129°
132°
135°
INSIDE
86°
81°
76°
72°
68°
64°
60°
57°
54°
51°
48°
45°
This chart assumes the roof slopes are the same on both sides of the hip, valley, or ridge line.
Contact your salesperson if the roof slopes are different.
CI-26
C/I ACCESSORIES
PLATED FINISH
SELF-DRILLING FASTENER
¼-14 x 1” Maxiseal Teks® 2
MATCHING FINISH HWH
SELF-DRILLING FASTENER
12-14 Maxiseal Teks® 2 driller with sealing washer
MATCHING FINISH LAP-TEK
HWH FASTENER
¼-14 x 7⁄8” Maxiseal Teks® Lap-Tek with sealing washer
PLATED FINISH
SELF-DRILLING FASTENER,
NO SEALING WASHER
¼-14 x 1¼” HWH Teks® 2
PLATED FINISH
SELF-DRILLING FASTENER W/ SHOULDER,
NO SEALING WASHER
¼-14 x 1¼” HWH Shoulder Teks® 2
CI-27
ITEM
NUMBER
SIZE
41SD10014Z
¼”
LENGTH
1”
HEAD
AF
5
WEIGHT
PER M.
⁄16”
18.5#
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fastener #1
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD114^
#12
1¼”
5
⁄16”
16.1#
41SD112^
#12
1½”
5
⁄16”
17.2#
41SD200^
#12
2”
5
⁄16”
20.7#
LENGTH
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many length and color combinations are special order and could be subject to limited availability. Please inquire. Fasteners sold in
quantities of 250 only.
ITEM
NUMBER
SIZE
41SD078^
¼”
LENGTH
7
⁄8 ”
HEAD
AF
5
⁄16”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
16.0#
Many colors are special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41TEK114Z
¼”
LENGTH
1¼
HEAD
AF
5
WEIGHT
PER M.
⁄16”
14.3#
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41TEKSH114Z
¼”
Fasteners sold in quantities of 250 only.
LENGTH
1¼”
5
⁄16”
14.3#
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
C/I ACCESSORIES
MATCHING FINISH
LONG-LIFE SELF-DRILLING FASTENER
¼-14 x 1¼” HTZ Teks® 2
MATCHING FINISH LONG-LIFE HWH
SELF-DRILLING FASTENER
12-14 HTZ Teks® 2 long-life driller with sealing washer
MATCHING FINISH LONG-LIFE
LAP-TEK HWH FASTENER
¼-14 x 7⁄8” HTZ Teks® 1 long-life Lap-Tek with sealing washer
MATCHING FINISH HWH
SELF-TAPPING FASTENER,
#14-10 HWH Type A Tapper with bonded washer
ITEM
NUMBER
SIZE
41UD11414^
¼”
LENGTH
1¼”
HEAD
AF
5
WEIGHT
PER M.
⁄16”
28.6#
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Fastener #1E
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UD114^
#12
1¼”
5
⁄16”
16.1#
41UD112^
#12
1½”
5
⁄16”
19.2#
41UD200^
#12
2”
5
⁄16”
20.7#
LENGTH
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many length and color combinations are special order and could be subject to limited availability. Please inquire. Fasteners sold in
quantities of 250 only.
ITEM
NUMBER
SIZE
41UD078^
¼”
LENGTH
7
⁄8”
HEAD
AF
5
⁄16”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
18.0#
Fastener #4
Some colors may be special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41ST034^
14
¾”
3
14.9#
41ST100^
14
1”
3
16.5#
41ST112^
14
1½”
3
21.2#
41ST200^
14
2”
3
26.3#
41ST300^
14
3”
3
34.2#
41ST400^
14
4”
3
50.0#
41ST600^
14
6”
3
60.0#
LENGTH
HEAD
AF
⁄8”
⁄8”
⁄8”
⁄8”
⁄8”
⁄8”
⁄8”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Some colors may be special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
CI-28
C/I ACCESSORIES
MATCHING FINISH HWH
SELF-TAPPING FASTENER
#17-14 x 1” Maxiseal HWH Type AB tapper with bonded
washer
MATCHING FINISH LONG-LIFE
HWH SELF-TAPPING FASTENER
¼-14 HTZ™ AB long-life tapper with sealing washer
MATCHING FINISH LONG-LIFE
HWH SELF-TAPPING FASTENER
17-14 x 1” HTZ™ AB long-life tapper with sealing washer
300 SERIES STAINLESS STEEL
MATCHING FINISH HWH
SELF-TAPPING FASTENER
14-10 Stainless Steel Type A tapper with sealing washer
300 SERIES STAINLESS STEEL
MATCHING FINISH HWH
SELF-TAPPING FASTENER
17-14 Stainless Steel Type AB tapper with sealing washer
CI-29
ITEM
NUMBER
SIZE
41ST17100^
17
LENGTH
1”
HEAD
AF
5
⁄16”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
17.8#
Some colors may be special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UT100^
¼”
1”
5
⁄16”
18.5#
41UT112^
¼”
1½”
5
⁄16”
22.7#
41UT200^
¼”
2”
5
⁄16”
24.5#
LENGTH
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many colors are special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UT17100^
#17
LENGTH
1”
HEAD
AF
5
⁄16”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
18.5#
Fastener #2A
Many colors are special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41S3034^
#14
¾”
3
14.3#
41S3100^
#14
1”
3
16.2#
41S3112^
#14
1½”
3
21.6#
41S3200^
#14
2”
3
26.0#
41S3300^
#14
3”
3
34.1#
LENGTH
HEAD
AF
⁄8”
⁄8”
⁄8”
⁄8”
⁄8”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many colors are special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41S317100^
#17
LENGTH
1”
HEAD
AF
3
⁄8”
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
19.5#
Many colors are special order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
PAINTED
C/I ACCESSORIES
PLATED FINISH SELF-TAPPING PANCAKE
FASTENER
#10-12 x 1” Pancake Quadrex
PLATED FINISH SELF-DRILLING
PANCAKE FASTENER
#10-12 x 1” #2 Pancake Quadrex Teks®
MATCHING FINISH HWH
WOOD FASTENER WITH SEALING WASHER
ITEM
NUMBER
SIZE
41PHT100ZTX
#10
HEAD
AF
WEIGHT
PER M.
1”
QUAD
10.0#
LENGTH
HEAD
AF
WEIGHT
PER M.
1”
QUAD
10.0#
LENGTH
HEAD
AF
WEIGHT
PER M.
LENGTH
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41PHD100ZTX
#10
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41WM10100^
#10
1”
¼”
8.7#
41WM10112^
#10
1½”
¼”
10.8#
41WM10200^
#10
2”
¼”
13.1#
41WM10300^
#10
3”
¼”
17.7#
LENGTH
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Fasteners sold in quantities of 250 only.
MATCHING FINISH LONG-LIFE HWH WOOD
FASTENER WITH SEALING WASHER
#10-16 Wood Ultimate™ long-life wood screw
ITEM
NUMBER
SIZE
41UW100^
#10
1”
5
⁄16”
14.2#
41UW112^
#10
1½”
5
⁄16”
16.3#
41UW200^
#10
2”
5
⁄16”
18.6#
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PAINTED
PLATED
PAINTED
These fasteners will punch through 26 gauge sheet metal and fasten into wood members. All length and color combinations are special
order and could be subject to limited availability. Please inquire. Fasteners sold in quantities of 250 only.
CI-30
C/I ACCESSORIES
COATED FINISH SELF-DRILLING STEEL
ROOFING FASTENER
SFS Intec Dekfast14™ with #3 Phillips truss head
PLATED FINISH THREADED MASONRY
FASTENER
ITEM
NUMBER
SIZE
LENGTH
41PTHD158C2
#14
15⁄8”
41PTHD278C2
#14
3”
41PTHD412C2
#14
4½”
41PTHD600C2
#14
6”
CONCRETE NAIL-IN
¼ x 1¼” Nail-in
WEDGE ANCHOR
W/ NUT & FLAT WASHER
WEIGHT
PER M.
#3
PRICE PER 1000
SENTRI COATED
14.0#
PHILLIPS
#3
23.0#
PHILLIPS
#3
33.0#
PHILLIPS
#3
43.0#
PHILLIPS
Fastener has a Sentri Coated finish. Used to attach panel clip to steel decking over rigid board insulation. Fasteners sold in quantities of 250
only.
ITEM
NUMBER
41CM114^
¼ x 1¼” HWH Tapcon®
HEAD
AF
SIZE
¼”
LENGTH
1¼”
HEAD
AF
5
WEIGHT
PER M.
⁄16”
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
PAINTED
10.0#
SLOTTED
Standard finish is Blue Climaseal®. Painted fasteners are special order. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
43NI
¼”
WEIGHT
PER M.
LENGTH
1¼”
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
2.1#
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
LENGTH
HEAD
AF
WEIGHT
PER M.
43WA038
3
⁄8”
3¾’
1½”
14.0#
43WA012
½”
2¾’
1½”
23.0#
43WA058
5
⁄8”
4¼”
1¾”
53.0#
43WA034
¾”
5½”
2”
90.0
43WA100
1”
6”
2½”
240.0#
PRICE PER 1000
1-1000
OVER 1000
All wedge anchors are zinc-plated. Use same diameter masonry drill bit to drill hole in concrete.
CI-31
PAINTED
PLATED
PLATED
C/I ACCESSORIES
MATCHING FINISH STAINLESS STEEL POP
RIVETS
ITEM
NUMBER
1
41PR^
SIZE
GRIP RANGE
WT. /
M.
⁄8” DIA.
.063” - .125”
10.8#
PRICE PER 1000
ALL COLORS
Body and mandrel are stainless steel. Sold in quantities of 250 only.
DRILL BITS
ITEM
NUMBER
SIZE
PRICE EACH
1
⁄8”
(.125”)
Pop rivets, Pilot holes for #14
stitch
41DB08
#8
(.199”)
#14 Members/stitch
⁄32”
(.219”)
#14 Stainless steel members/
stitch
#1
(.228”)
#14 Into heavy structural
7
41DB01
SCREW GUN
USED FOR
41DB18
41DB732
MAGNETIC SOCKET (HEX DRIVE)
DIAMETER
ITEM
NUMBER
SIZE
41MS38
3
41MS516
5
PRICE EACH
⁄8”
⁄16”
41MS14
¼”
ITEM
NUMBER
DESCRIPTION
41SG
PRICE EACH
Bosch Model No. 1421 VSR
Variable speed, reversible screw gun.
0-2500 RPM range, 5 amp motor, 110 volt AC.
One year warranty.
Screw guns exceeding 2500 RPM are not recommended for proper fastener installation. Over-torquing, stripping, or drill point
destruction may occur if such a gun is used.
POP RIVET TOOL
ITEM
NUMBER
41PRTOOL
DESCRIPTION
PRICE EACH
Marson HP-2/3900 Hand Pop Rivet Tool
Use to install pop rivets.
PERSONNEL DOOR CANOPY KIT
ITEM
NUMBER
WIDTH
FINISH
GAUGE
WT./EA.
4’-6”
WHITE
26
100#
COLOR
26
100#
7’-6”
WHITE
26
165#
7’-6”
COLOR
26
165#
4’-6”
Canopy extends 4’ from building wall and includes support
system for easy installation in existing buildings.
PRICE EACH
Price includes wood crating and all necessary hardware for installation.
CI-32
C/I ACCESSORIES
CIRCULAR GRAVITY VENTILATORS
ITEM
NUMBER
DESCRIPTION
WT./EA.
47VCTPM_MDL
12” Diameter throat, 26 GA, w/ damper
65.0#
47VCTPM_MDL
12” Diameter throat, 26 GA, w/o damper
65.0#
45V20CA^
20” Diameter throat, 26 GA, w/ damper
70.0#
47VCTPM_MDL
20” Diameter throat, 26 GA, w/o damper
70.0#
PRICE PER EACH
GALVALUME®
WHITE
All ventilators have bird screen.
Pricing shown is for ventilators mounted into a matching finish Super Span 3’-0” ridge cap having a roof slope of 1:12 or 4:12 only.
For ventilators mounted into a Low Rib 3’-0” ridge cap or any other roof slope on a Super Span 3’-0” ridge cap (up to 6:12), add $10.00 per vent.
For ventilators mounted into a flat skirt, no extra charge.
For ventilators to be slope-mounted into a 6’-0 long Super Span panel, add $25.00 per vent. (47VCTSM_MDL)
For 24 ga Galvalume or White add 50%. For 24 ga KYNAR color add 75% to the White price.
For standard color ventilators other than Polar White, add 45%.
For hardware required for adjustable ventilators, see page CI-35.
For chain operated ventilators, please inquire.
CONTINUOUS THROAT GRAVITY
RIDGE VENTILATORS
ITEM
NUMBER
DESCRIPTION
WT./EA.
45V9A^CP
9” Throat x 10’ long, 26 GA, w/ damper
207.0#
45V9F^
9” Throat x 10’ long, 26 GA, w/o damper
207.7#
45V12A^CP
12” Throat x 10’ long, 26 GA, w/ damper
223.0#
45V12F^
12” Throat x 10’ long, 26 GA, w/o damper
223.0#
PRICE PER EACH
GALVALUME®
WHITE
All ventilators have bird screen.
Pricing shown is for ventilators with die-formed skirts for Super Span panel only. Included with each ventilator are splice plates, end skirts, and
special rope sealant.
For ventilators mounted into a flat skirt, deduct $25.00.
All ventilators will conform to roof slopes up to 6:12.
For 24 ga Galvalume or White add 50%. For 24 ga KYNAR color add 75% to the White price.
For standard color ventilators other than Polar White, add 45%.
Die-formed skirts are for Super Span panel available in 26 gauge
GALVALUME ® and Polar White only.
For hardware required for adjustable ventilators, see page CI-35.
For chain operated ventilators, please inquire.
RIDGELINE CORAVENT LO-PROFILE
FLOATING RIDGE VENT
ITEM
NUMBER
%NDCAP
CI-33
WT./EA.
PRICE PER EACH
FIXED OPEN ONLY
GALVALUME®
7” Throat x 10’ long, 24 GA
65.0#
47VRLH-MDL
End Cap
7.95#
47VRLH-MDL
(Splice cover and sealant)
Optional Splice Kit
10.34#
47VRL-MDL
6ENTILATIONCORE
DESCRIPTION
(2 per run required.)
Designed for minimal ventilation with lower profile appearance.
For Coravent with flat skirts, no extra charge.
Must specify roof slope (up to 12:12).
For standard color Coravent other than Polar White, add 45%.
Die-formed skirts are for Super Span panel available in 26 gauge
GALVALUME ® and Polar White only.
End caps and splice kits are sold separately.
WHITE
C/I ACCESSORIES
VENTILATOR HARDWARE
ITEM
NUMBER
45VC
Galvanized 3⁄32” Vent Cable
45VP
1½” Pulley w/ Swivel Block
45VPMA
STEEL LOUVERS
PRICE EACH
Pulley Mounting Angle (red-oxide finish)
45VEB
¼” x 2” Eye Bolt w/ Nut
45VCC
Cable Clamps
45VVH
Vent Adjustment Hook
45VHW
Hand Winch
45VWMA
ALL LOUVERS HAVE 18 GAUGE FRAMES, 20 GAUGE BLADES
AND CHOICE OF BIRD OR INSECT SCREEN.
DESCRIPTION.
Winch Mounting Angle (red-oxide finish)
ITEM
NUMBER
WIDTH
HEIGHT
TYPE
WT. /
EA.
45L33G-SO
3’
3’
Fixed or Adjustable
54.0#
45L43G-SO
4’
3’
Fixed or Adjustable
72.0#
45L53G-SO
5’
3’
Fixed or Adjustable
91.0#
45L63G-SO
6’
3’
Fixed or Adjustable
108.0#
45L44G-SO
4’
4’
Fixed or Adjustable
96.0#
45L64G-SO
6’
4’
Fixed or Adjustable
144.0#
PRICE EACH
GALVANIZED
Specify Super Span, Low Rib, Monarch, or Straight Fins. All louvers are fabricated with permanent fins to fit specified panel. Width of louver is measured
center-to-center of fins. All louvers are self-framing and require no additional flashing or trim. If louver is to fit in an existing framed opening, notify your
salesperson. All adjustable louvers operate with a hand crank. For pull-chain operation, please inquire. All louvers are special order, require five working-day
delivery and are not returnable. *Color louvers other than Polar White, Burnished Slate, Sahara Tan, and Light Stone may require an additional charge. Please
inquire.
STEEL LOUVERS
ALL LOUVERS HAVE 18 GAUGE FRAMES, 20 GAUGE BLADES
AND CHOICE OF BIRD OR INSECT SCREEN.
ITEM
NUMBER
WIDTH
HEIGHT
TYPE
WT. /
EA.
45L33C-SO
3’
3’
Fixed or Adjustable
54.0#
45L43C-SO
4’
3’
Fixed or Adjustable
72.0#
45L53C-SO
5’
3’
Fixed or Adjustable
91.0#
45L63C-SO
6’
3’
Fixed or Adjustable
108.0#
45L44C-SO
4’
4’
Fixed or Adjustable
96.0#
45L64C-SO
6’
4’
Fixed or Adjustable
144.0#
PRICE EACH
COLOR
Specify Super Span, Low Rib, Monarch, or Straight Fins. All louvers are fabricated with permanent fins to fit specified panel. Width of louver is measured
center-to-center of fins. All louvers are self-framing and require no additional flashing or trim. If louver is to fit in an existing framed opening, notify your
salesperson. All adjustable louvers operate with a hand crank. For pull-chain operation, please inquire. All louvers are special order, require five working-day
delivery and are not returnable. *Color louvers other than Polar White, Burnished Slate, Sahara Tan, and Light Stone may require an additional charge. Please
inquire.
CI-34
C/I ACCESSORIES
TAPE SEAL
ITEM
NUMBER
WT. /
EA.
DESCRIPTION
PRICE EACH
Gray Butyl Flat Tape on Waterproof Release Paper
42RS038
Case of 3⁄8” x 3⁄32” (24 rolls x 50’ long)
3
38.0#
3
42RS038
Roll of ⁄8” x ⁄32” x 50’ long
1.5#
42RS100
Case of 1” x 3⁄32” (10 rolls x 50’ long)
33.0#
42RS100
Roll of 1” x 3⁄32” x 50’ long
3.3#
Flat
Gray Double Bead Sealant on Waterproof Release Paper
42RS078
Case of 7⁄8” x 3⁄16” (24 rolls x 25’ long)
15.0#
42RS078
Roll of 7⁄8” x 3⁄16” x 25’ long
0.7#
Double Bead
Gray Triple Bead Sealant on Waterproof Release Paper
42RS212
Case of 2½” x 3⁄16” (6 rolls x 20’ long)
21.0#
42RS212
Roll of 2½” x 3⁄16” x 20’ long
3.5#
Triple Bead
TUBE CAULKING
10.3 OZ. CARTRIDGE
ITEM
NUMBER
DESCRIPTION
TUBE
SIZE
WT. /
EA
PRICE EACH
Schnee-Morehead 7108 Permathane
Polyurethane (White only)
42TCCLR
Case of 30 cartridges
10.3 oz.
35.0#
42TCCLR
Single cartridges
10.3 oz.
1.2#
Schnee-Morehead5522 Acryl-R
Acrylic (stocked in Clear only)
CLOSURE STRIPS
42TCW
Case of 30 cartridges
10.3 oz.
35.0#
42TCW
Single cartridges
10.3 oz.
1.2#
ITEM
NUMBER
DESCRIPTION
WT. /
EA
Cross-Linked Gray Polyethylene (unless noted)
CI-35
42CS29R
CS29R Super Span - 36” (Inside)
0.14#
42CS28R
CS28R Super Span - 36” (Outside)
0.36#
42CS27R
CS27R Low Rib - 36” (Inside)
0.12#
42CS26R
CS26R Low Rib - 36” (Outside)
0.23#
42CS25R
CS25R Monarch - 36” (Inside)
0.38#
42CS24R
CS24R Monarch - 36” (Outside)
0.38#
42CS34R
CS34R Cor-Span - 32”(Outside/Inside)
0.23#
42CS36R
CS36R 7.2 Rib - 36” (outside/inside) Neoprene
0.40#
PRICE EACH
C/I ACCESSORIES
SQUARE FOAM CLOSURE
ITEM
NUMBER
42CS22SQ
AST HI-ACRYLIC CLOSURE SEALANT TAPE
WATER-BASED, ACRYLIC-MODIFIED ASPHALT IMPREGNATED, NONDRYING, NON-EXTRUDING, SELF-EXPANDING SEALANT TAPE.
¼” X 1” EXPANDS TO 1” X 1”.
3
⁄8” X 1¼” EXPANDS TO 1½” X 1¼”
DESCRIPTION
2” x 2” x 25’-0” Square Foam Closure
ITEM
NUMBER
DESCRIPTION
WT. /
EA
1.25#
WT. /
EA
42HAST100
Case of ¼” x 1” (26 rolls x 19.68’ long)
37.0#
42HAST100
Roll of ¼” x 1” x 19.68’ long
1.4#
42HAST112
42HAST112
3
Case of ⁄8” x 1¼” (20 rolls x 13.12’ long)
3
Roll of ⁄8” x 1¼” x 13.12’ long
PRICE EACH
PRICE EACH
34.0#
1.7#
This tape is an impregnated, self-expanding, open-cell foam that when compressed properly seals against moisture, vapor, air, dust, and
sound. The tape expands to seal all profiles of metal panels and creates an uninterrupted seal which is not subject to skips or runs
during application.
PANEL SUPPORT TRIM
TYPICAL INSTALLATION SHOWN
3ELF4APPINGOR
3ELF$RILLING&ASTENER
ITEM
NUMBER
COLOR
LENGTH / DESCRIPTION
WT. /
EA.
45PSTW
White
10’-0” long
7.5#
45PSTB
Bronze
10’-0” long
7.5#
PRICE EACH
.AIL)N
&ASTENER
Extruded aluminum panel support eliminates need for forming panel notch in foundation. Fasteners for attachment are not included.
NATIONAL SLIDING DOOR TRACK
ALL TRACK IS 16 GA. GALVANIZED.
ITEM
NUMBER

WT./EA.
44SDT10
Door Track x 10’-0
16.5#
44SDT12
Door Track x 12’-0
20.8#
44SDT14
Door Track x 14’-0
23.6#
44SDT16
Door Track x 16’-0
28.3#
44SDT18
Door Track x 18’-0
31.9#
44SDT20
Door Track x 20’-0
33.8#
Ð
4RACK
#ROSS
3ECTION
LENGTH
PRICE
EACH
Maximum door weight should be 400 lbs. All Door Track manufactured by National Mfg. Co.
NATIONAL SLIDING DOOR HARDWARE
ALL HARDWARE IS ZINC-PLATED.
ITEM
NUMBER
DESCRIPTION
WT./EA.
A) 21⁄8” Diameter Trolley Truck w/ 5½” Bolt.
1.2#
44SDB
B) Track Hanger Bracket.
(use every 2’ of track)
1.4#
44SDSB
C) Track Hanger/Splice Bracket (w/ set screw)
1.5#
44SDDP
D) #7 Extra Heavy Duty Door Pull.
.9#
44SDHS
E) 4½” Hasp and Staple set.
.3#
F) 1⁄8” x 4” Flat Neoprene Weather-Stripping.
.4#
44SDTR
(max. door weight 400 lbs.)
PRICE
EACH
"
!
#
$
%
&
42CSNEOP
All hardware manufactured by National Mfg. Co.
CI-36
C/I ACCESSORIES
VINYL FACED INSULATION
ITEM
NUMBER
THICKNESS
WT./MSF.
47INS_MDL
3”
(R10)
192.0#
47INS_MDL
4”
(R13)
220.0#
PRICE PER
MSF
Insulation is UL-25 fire rated, 0.6#/cu.ft. density, with a 4 mil. white vinyl taffeta vapor barrier with 2” vinyl tabs on each side.
Length and width of each roll must be specified.
Length limits: 20’ - 125’
Available widths: 3’, 4’, 5’, 6’
Maximum 2 widths per order, please!
Rolls of 3” thick x 6’-0 wide are stocked in 52’-0 and 104’-0 lengths. (46I352 and 46I3104)
POULTRY NETTING
ITEM
NUMBER
DESCRIPTION
WT./EA.
PRICE
EACH
20 Gauge Galvanized x 2” Wire Mesh
INSULATION TAPES
TOUCH-UP PAINT
46WM300
6’ wide x 300’ long roll
88.0#
46WM150
6’ wide x 150’ long roll
44.0#
ITEM
NUMBER
(Used for sidelaps or tears in facing.)
42TPDF
(Used to secure insulation at eave or base prior to stretching tight.)
ITEM
NUMBER
1½” Wide Double-Faced Polyester Tape x 180’ roll
DESCRIPTION
42TU16P
Red Oxide Primer - 15 oz. Spray Can
42TUGR0
Red Oxide Primer Solvent Based - Gallon Can
42TU9^
PRICE
EACH
3” Wide White Vinyl Patching Tape x 150’ roll
42TPIN
42TUG5RO
CI-37
DESCRIPTION.
Red Oxide Primer Solvent Based - 5 Gallon Pail
Akzo Nobel Matching Color Panel Touch-Up Paint
(Not available for secondary colors or backer)
9 oz. Spray Can
Minimum purchace required for special colors - see sales
PRICE EACH
C/I ACCESSORIES
RUBBER PIPE FLASHING
$%+4)4%
§
2%42/&)4$%+4)4%§
ITEM
NUMBER
SIZE
PIPE RANGE
WT. /
EA.
42RPF01
#1
¼” - 2” O.D.
0.2#
42RPF02
#2
1¼” - 3” O.D.
0.3#
42RPF03
#3
¼” - 4” O.D.
0.5#
42RPF04
#4
3” - 6” O.D.
0.8#
42RPF05
#5
4” - 7” O.D.
1.0#
42RPF06
#6
5” - 9” O.D
1.2#
42RPF07
#7
6” - 11” O.D.
1.6#
42RPF08
#8
7” - 13” O.D.
2.6#
42RPF09
#9
10” - 20” O.D.
3.9#
42RPF10
#10
12” - 26” O.D.
7.8#
42RPF801
801 Retrofit
¾” - 2¾” O.D.
0.3#
42RPF802
802 Retrofit
2” - 7¼” O.D.
1.0#
42RPF803
803 Retrofit
3¼” - 10” O.D.
1.6#
PRICE EACH
Flexible aluminum base, black, EPDM rubber pipe flashing. Adapts to any panel profile. Screws and caulking are not included. Temperature range: -65° F
to 250° F. Silicone, high-temperature types are available. Please inquire.
ROOF CURBS
ITEM
NUMBER
A B
45RC22G-SO
2’ X 2’
Insulated, Peak or Slope Mounted
40.0#
45RC33G-SO
3’ X 3’
Insulated, Peak or Slope Mounted
55.0#
45RC44G-SO
4’ X 4’
Insulated, Peak or Slope Mounted
100.0#
DESCRIPTION
WT. /
EA
PRICE EACH
GALVALUME®
A
X
B
X
8"
6" 3"
3"
1½ "
½"
6"
16ga. Galv. Alum.
welded
watertight
Section "X-X"
Required Information
Type Panel ___________________________________________
Roof Pitch ___________________________________________
Slope Mounted? ______________________________________
Peak Mounted? _______________________________________
Insulated? ___________________________________________
Color _______________________________________________
A __________________________________________________
B __________________________________________________
ROOF CURBS
All panel caps and plugs are sent loose for field location. This eliminates the need for exact rib locations. Other sizes are available. Please inquire for
pricing. All roof curbs are special orders, require a minimum of ten (10) working day delivery and are non-returnable.
ITEM
NUMBER
A B
45RC22C-SO
2’ X 2’
Insulated, Peak or Slope Mounted
40.0#
45RC33C-SO
3’ X 3’
Insulated, Peak or Slope Mounted
55.0#
45RC44C-SO
4’ X 4’
Insulated, Peak or Slope Mounted
100.0#
DESCRIPTION
WT. /
EA
PRICE EACH
COLOR
A
X
B
X
8"
6" 3"
6"
1½"
½"
3"
16ga. Galv. Alum.
welded
watertight
Required Information
Section "X-X"
Type Panel ___________________________________________
Roof Pitch ___________________________________________
Slope Mounted? ______________________________________
Peak Mounted? _______________________________________
Insulated? ___________________________________________
Color _______________________________________________
A __________________________________________________
B __________________________________________________
All panel caps and plugs are sent loose for field location. This eliminates the need for exact rib locations. Other sizes are available. Please inquire for
pricing. All roof curbs are special orders, require a minimum of ten (10) working day delivery and are non-returnable.
CI-38
C/I ACCESSORIES
GALVANIZED EHS STRAND
ITEM
NUMBER
SIZE
MINIMUM BREAKING
STRENGTH
WT. /
FT.
43C14
¼”
6,650 lbs.
0.1#
43C516
5
⁄16”
11,200 lbs.
0.2#
43C38
3
⁄8”
15,400 lbs.
0.3#
43C12
½”
26,900 lbs.
0.5#
PRICE PER FOOT
All strand conforms to the requirements of ASTM A475, EHS Grade.
GALVANIZED EHS BRACE GRIPS
ITEM
NUMBER
SIZE
MINIMUM BREAKING
STRENGTH
WT. /
FT.
43BG14
¼”
6,650 lbs.
0.3#
43BG516
5
⁄16”
11,200 lbs.
0.5#
43BG38
3
⁄8”
15,400 lbs.
0.9#
43BG12
½”
26,900 lbs.
2.0#
SIZE
TOTAL
LENGTH
THREAD
LENGTH
WT. /
EA.
½” DIA.
8”
6”
0.7#
5
⁄8” DIA.
8”
6”
1.5#
¾” DIA.
8”
6”
2.0#
7
8”
6”
3.0#
PRICE EACH
BLACK FINISH
EYE BOLTS W/ NUTS & FLAT WASHER
CI-39
⁄8” DIA.
ITEM
NUMBER
PRICE/
100
HD GALVANIZED
ITEM
NUMBER
PRICE/
100
C/I ACCESSORIES
A325 HIGH STRENGTH STRUCTURAL
BOLTS
BLACK FINISH
HD GALVANIZED FINISH
WT. /
100
ITEM NUMBER
½” Diameter - Eye Bolt Size
32.4#
43HS012
43HSG012
5
⁄8” Diameter - Eye Bolt Size
40.0#
43HS058
43HSG058
¾” Diameter - Eye Bolt Size
55.7#
43HS034
43HSG034
7
⁄8” Diameter - Eye Bolt Size
82.3#
43HS078
43HSG078
1” Diameter - Eye Bolt Size
101.6#
43HS100
43HSG100
HILLSIDE WASHERS
SIZE
PRICE/ 100
BLACK FINISH
ITEM NUMBER
HD GALVANIZED FINISH
BOLT
LENGTH
THREAD
LENGTH
TPI
½"
1¼"
1"
13
17.8
43HTB012114
43HBG012114
½"
1½"
1"
13
19.2
43HTB012112
43HBG012112
5
1½"
1¼"
11
33.1
43HTB058112
43HBG058112
5
1¾"
1¼"
11
35.3
43HTB058134
43HBG058134
5
⁄8”
2"
1¼"
11
37.4
43HTB058200
43HBG058200
¾"
1¾"
13⁄8”
10
55.3
43HTB034134
43HBG034134
¾"
2"
13⁄8”
10
58.4
43HTB034200
43HBG034200
¾"
2¼"
13⁄8”
10
61.6
43HTB034214
43HBG034214
¾"
2½"
13⁄8”
10
64.7
43HTB034212
43HBG034212
¾"
2¾"
13⁄8”
10
67.8
43HTB034234
43HBG034234
1"
2¾"
1¾"
8
135
43HTB100234
43HBG100234
1"
3"
1¾"
8
141
43HTB100300
43HBG100300
1"
3¼"
1¾"
8
146
43HTB100314
DIA.
⁄8”
⁄8”
WT/100
ITEM NUMBER
PRICE/
100
PRICE/ 100
ITEM NUMBER
PRICE/
100
43HBG100314
All bolts have Heavy Hex Heads. Use with A194 Heavy Hex Nuts.
CI-40
C/I ACCESSORIES
BLACK FINISH
A194 HEAVY HEX NUTS
BOLT DIA.
HEIGHT
TPI
HD GALVANIZED FINISH
WT/ 100
ITEM NUMBER
PRICE/
100
½"
31/64"
13
6.0
43HTN012
43HNG012
5/8"
39/64"
11
11.0
43HTN058
43HNG058
¾"
47/64"
10
18.0
43HTN034
43HNG034
1"
63/64"
8
41.0
43HTN100
43HNG100
THREAD
LENGTH
TPI
WT/100
ZINC-PLATED
A307 LOW CARBON BOLTS
ITEM NUMBER
DIA.
BOLT
LENGTH
ITEM NUMBER
½"
1¼"
1¼"
13
10.3
½"
1¼"
1"
13
8.5
PRICE/
100
HD GALVANIZED FINISH
PRICE/
100
ITEM NUMBER
43MB012114
43MBG012114
43MB012114F
43MBG012114F
PRICE/
100
MACHINE BOLT
Use with A563 Hex Nuts.
A563 GRADE A HEX NUTS
F844 USS CIRCULAR FLAT WASHERS
(NOT HARDENED)
CI-41
BLACK FINISH
HD GALVANIZED FINISH
BOLT DIA.
HEIGHT
TPI
WT/
100
ITEM NUMBER
½"
5/16"
13
3.8
43N012
43NG012
5/8"
3/8"
11
7.3
43N058
43NG058
¾"
27/64"
10
11.9
43N034
43NG034
1"
35/64"
8
28.3
43N100
43NG100
BOLT DIA.
I.D.
O.D.
WT/
100
PRICE/ 100
BLACK FINISH
ITEM NUMBER
PRICE/ 100
ITEM NUMBER
PRICE/ 100
HD GALVANIZED FINISH
ITEM NUMBER
½"
9/16"
1 3/8"
3.9
43W012
43WG012
"
11/16"
1 3/4"
7.7
43W058
43WG058
¾"
13/16"
2"
11.0
43W034
43WG034
1"
1 1/16"
2 1/2"
18.9
43W100
43WG100
PRICE/ 100
C/I ACCESSORIES
ITEM
NUMBER
PERSONNEL DOOR UNITS
443070MW8
DOOR SIZE
STYLE
3070 (single leaf)
“M”
“G” OR “LV”
3070 (single leaf)
444070MW8
-
'
,6
349,%
349,%
349,%
“M”
“G” OR “LV”
4070 (single leaf)
446070MW8
6070 (double leaf)
“M”
“G” OR “LV”
6070 (double leaf)
v
34!.$!2$
4070 (single leaf)
&2!-%3%#4)/.
v
WT./UNIT
PRICE PER UNIT
WHITE FINISH
166#
161#
190#
185#
265#
255#
Single leaf door unit includes: leaf, frame (knocked down), assembly bolts, plain bearing hinges and threshold. Double leaf door unit includes: two surface
bolts, handed astragal and lock hole filler plate in addition to the items listed for the single leaf unit. Glass and glazing is not included on “G” or “LV”.
All white door leaves are embossed. ADA regulations require lever lockset for public access buildings.
All door units are non-handed.
DOOR COMPONENTS
ITEM
NUMBER
44LFMW
,%6%2490%
#9,).$2)#!,
,/#+3%4
DESCRIPTION.
PRICE PER EACH
WHITE FINISH UNL. NTD.
3070 “M” Door Leaf only
3070 “G” or “LV” Door Leaf only
44LFM4W
4070 “M” Door Leaf only
4070 “G” or “LV” Door Leaf only
$OOR
,EAF
v
().'%3
44FW
3070 Frame, 8¼” Depth (includes assembly bolts)
44FW4
4070 Frame, 8¼” Depth (includes assembly bolts)
44FW6
6070 Frame, 8¼” Depth (includes assembly bolts)
44ACCASW
Handed Astragal (specify leaf attaching to)
44ACCLFW
Lock Hole Filler Plate (used on inactive leaf)
Aluminum Threshold (ADA) ½” high.
(includes anchors, screws, and sweep)
bv
4(2%3(/,$37%%0
44ACCT
3’-0”
44ACCT4
4’-0”
44ACCT6
6’-0”
44ACCHB
Surface Bolt, US26D (2 required per leaf)
Full Mortise Hinges, 4½” x 4½” Steel, US26D, Non-Removable Pins, (3/Box)
7%!4(%2342)0
#,/3%2
44ACCHC
44ACCHCBB
44ACCCL
352&!#%-/5.4%$0!.)#$%6)#%
2EPLACESSTANDARDLOCKSET
-ULLION
3URFACE-OUNTED
0ANIC$EVICE
44ACCWS
44ACCWS4
44ACCWS6
44LKL
44LKLHD
44LKLL
44LKML
44LKD54
$OOR
$OOR
44ACCMUL
#ROSS3ECTIONTHRU-ULLION$OORS
2%-/6!",%-5,,)/.!00,)#!4)/.
44LKDBSC
Plain Bearing
Ball Bearing
Thru-Mounted, Hydraulic, Size IV Door Closer
Weather-stripping Pkg, aluminum/neoprene
3070 Door Weather-stripping Pkg, aluminum/neoprene
4070 Door Weather-stripping Pkg, aluminum/neoprene
6070 Door Weather-stripping Pkg, aluminum/neoprene
Standard Duty Cylindrical Lockset Knob, US32D
Heavy Duty Cylindrical Lockset Knob, US32D
Lever Type Cylindrical Lockset, US26D (ADA)
Mortise Lever Lockset, (function 86A), US26D (requires a specially
prepared leaf) (ADA)
Keyed Alike Charge, per Lock
Surface Mounted Reversible Panic Device, US26D (has keyed lever
for exterior entry) (ADA)
Removable Mullion (Must be used on double leaf door when using
above panic device), gray only
Single Cylinder Dead Bolt, US32D, (lock only, door prep charges not
included)
Dead Bolt Preparation Charges for Door Leaf and Frame (this hands
leaf and frame)
CI-42
C/I ACCESSORIES
PRICE EACH
HORIZONTAL SLIDE WINDOWS
Head
Super Span Panel Fin
7.2 Rib Panel Fin
Monarch Panel Fin
Cor-Span
ITEM
NUMBER
SIZE
WT./EA.
3030 w/ half-screen
24.0#
3040 w/ half-screen
33.5#
4030 w/ half-screen
31.8#
4040 w/ half-screen
41.7#
5030 w/ half-screen
38.5#
5040 w/ half-screen
49.9#
6020 w/ half-screen
38.5#
6030 w/ half-screen
43.8#
6040 w/ half-screen
57.8#
MILL
FINISH
ALUMINUM
FRAME/FINSH
SINGLE
INS
BRONZE
PAINTED
ALUMINUM
FRAME/FINSH
SINGLE
INS
Sill
Low Rib Panel Fin
Straight Panel Fin
Specify Super Span, Low Rib, Monarch, 7.2 Rib, Cor-Span or Straight Fins. All windows have field installed fins to fit the specified panel. Width of window is
indicated by the first two digits in the description and is measured center-to-center of the fins. Windows are self-framing and require no additional flashing or
trim. Glass is clear DSB grade. LTL crating charge is $50 per order.
VERTICAL SLIDE WINDOWS
ITEM
NUMBER
PRICE EACH
SIZE
WT./EA.
3030 w/ half-screen
30.0#
3040 w/ half-screen
34.0#
3050 w/ half-screen
38.0#
BRONZE PAINTED ALUMINUM
FRAMES/FINSH
SINGLE PANE
INSULATED
Specify Super Span, Low Rib, Monarch, 7.2 Rib, Cor-Span, or Straight Fins. All windows have field installed fins to fit the specified panel. Width of window is
indicated by the first two digits in the description and is measured center-to-center of the fins. Windows are self-framing and require no additional flashing or
trim. Glass is clear DSB grade. LTL crating charge is $50 per order.
FIXED GLASS SLIMLINE WINDOWS
ITEM
NUMBER
PRICE EACH
SIZE
WT./EA..
1070
40.0#
2060
50.0#
2070
52.0#
BRONZE PAINTED ALUMINUM
FRAMES/FINSH
SINGLE PANE
INSULATED
Specify Super Span, Low Rib, Monarch, 7.2 Rib, Cor-Span, or Straight Fins. All windows have field installed fins to fit the specified panel. Width of window is
indicated by the first two digits in the description and is measured center-to-center of the fins. Windows are self-framing and require no additional flashing or
trim. Glass is 1/8” Gray Tinted Tempered. LTL crating charge is $50 per order.
CI-43
C/I ACCESSORIES
LIGHT TRANSMITTING PANELS
ITEM
NUMBER
DESCRIPTION
WT./EA.
PRICE EACH
Super Span Panel (high strength)
42SLSS107
36” coverage x 10’-8” long, smooth finish
42SLSS12
36” coverage x 12’-0” long, smooth finish
42SLSS146
36” coverage x 14’-6” long, smooth finish
42SLSS24
36” coverage x 24’-0” long, smooth finish
Low Rib Panel (high strength)
WARNING: These light transmitting panels are not designed or
intended to bear the weight of any person walking, stepping,
standing or resting on them. Whirlwind Building Components
DISCLAIMS ANY WARRANTY OR REPRESENTATION, EXPRESSED
OR IMPLIED, that any person can safely walk, step, stand or rest on
or near these light transmitting panels or that they comply with any
OSHA regulation.
42SLLR11
36” coverage x 11’-0” long, smooth finish
42SLLR12
36” coverage x 12’-0” long, smooth finish
Cor-Span Panel
42SL12CS
32” coverage x 12’-0” long, smooth finish
(not available with woven fiberglass mat)
7.2 Rib Panel (high strength)
42SL7212
36” coverage x 12’-0” long, smooth finish
All High Strength panels are translucent white fiberglass with woven fiberglass mat, weighing a nominal 8 oz. per sq. ft., approx. 46% light transmission.
Motor Freight Crating $6.00 per foot. Maximum 100 per bundle.
STAINLESS GROMMETS
ITEM
NUMBER
41GROM
For stitching light transmitting panels together.
DESCRIPTION
#6-32 x 1” hole slotted hex head
305 stainless steel machine
screw pre-assembled to 1/2”
O.D. washer and neoprene
grommet with “molded-in” nut.
WT./1000.
PRICE PER 1000
4.9#
¼” diameter hole required.
CI-44
ROLL-FORMED SECONDARY MEMBERS
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
52HS103
12’-3”
22
Galvalume®
5.4#
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
52HS104
12’-3”
22
Galvalume®
7.7#
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
52HS106G
20’-0”
16
Galvanized
23.4#
52HS106P
20’-0”
16
Red-Oxide
22.6#
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
b
52SG101G
20’-0”
18
Galvanized
18.1#
Ð
52SG101P
20’-0”
16
Red-Oxide
22.0#
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
52SG102G
20’-0”
18
Galvanized
11.5#
52SG102P
20’-0”
16
Red-Oxide
14.0#
ITEM
NUMBER
LENGTH
GAUGE
FINISH
WT./EA.
52CS101G
20’-0”
18
Galvanized
15.6#
3/4” HAT SECTION
HS-103
PRICE PER EACH
Ð
1-1/4” HAT SECTION
HS-104
PRICE PER EACH

b
1-1/2” HAT SECTION
HS-106
PRICE PER EACH
1½
111⁄16
213⁄16
1” SUB-GIRT
PRICE PER EACH
SG-101
1/2” SUB-GIRT
SG-102
PRICE PER EACH
b
CHANNEL SECTION
CS-101
b
CI-45
PRICE PER EACH
ROLL-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
7
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5214Z12P
Red-Oxide
12
8.17#
5214Z12G
Galvanized
12
8.35#
5212312Z14P
Red-Oxide
14
4.77#
5212312Z12P
Red-Oxide
12
7.11#
5212312Z14G
Galvanized
14
4.91#
5212312Z12G
Galvanized
12
7.26#
5212Z14P
Red-Oxide
14
4.29#
5212Z12P
Red-Oxide
12
6.39#
5212Z14G
Galvanized
14
4.42#
5212Z12G
Galvanized
12
6.53#
5210312Z14P
Red-Oxide
14
4.29#
5210312Z12P
Red-Oxide
12
6.39#
5210312Z14G
Galvanized
14
4.42#
5210312Z12G
Galvanized
12
6.53#
5210Z16P
Red-Oxide
16
3.18#
5210Z14P
Red-Oxide
14
3.81#
5210Z12P
Red-Oxide
12
5.68#
5210Z16G
Galvanized
16
3.30#
5210Z14G
Galvanized
14
3.93#
5210Z12G
Galvanized
12
5.80#
528312Z16P
Red-Oxide
16
3.18#
528312Z14P
Red-Oxide
14
3.81#
528312Z12P
Red-Oxide
12
5.68#
528312Z16G
Galvanized
16
3.30#
528312Z14G
Galvanized
14
3.93#
528312Z12G
Galvanized
12
5.80#
PRICE PER FOOT
5
14" x 3 ⁄8" x 3 ⁄8"
Unequal Flange Zee
12" x 33⁄8" x 31⁄8"
Unequal Flange Zee
12" x 23⁄8" x 21⁄8"
Unequal Flange Zee
10" x 33⁄8" x 31⁄8"
Unequal Flange Zee
10" x 23⁄8" x 21⁄8"
Unequal Flange Zee
8" x 33⁄8" x 31⁄8"
Unequal Flange Zee
1. See page CI-47 for all zee and cee pricing notes and information.
2. See the Technical Information section for punching patterns and lap details.
3. Add Suffix “SL” to the end of the item number for parts 5’-0” or shorter.
CI-46
ROLL-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
8" x 23⁄8" x 21⁄8"
Unequal Flange Zee
6" x 2 ⁄8" x 2 ⁄8"
Unequal Flange Zee
3
1
4" x 23⁄8" x 21⁄8"
Unequal Flange Zee
4" x 2" x 2"
Equal Flange Zee
X X %QUAL&LANGE:EE
ITEM
NUMBER
FINSIH
GAUGE
WT./FT.
528Z16P
Red-Oxide
16
2.78#
528Z14P
Red-Oxide
14
3.33#
528Z12P
Red-Oxide
12
4.97#
528Z16G
Galvanized
16
2.89#
528Z14G
Galvanized
14
3.43#
528Z12G
Galvanized
12
5.07#
526Z16P
Red-Oxide
16
2.39#
526Z14P
Red-Oxide
14
2.85#
526Z16G
Galvanized
16
2.47#
526Z14G
Galvanized
14
2.94#
524Z16P
Red-Oxide
16
1.99#
524Z14P
Red-Oxide
14
2.38#
524Z16G
Galvanized
16
2.06#
524Z14G
Galvanized
14
2.45#
5242Z16P
Red-Oxide
16
1.79#
5242Z14P
Red-Oxide
14
2.14#
5242Z16G
Galvanized
16
1.85#
5242Z14G
Galvanized
14
2.20#
52312Z16P
Red-Oxide
16
1.39#
52312Z14P
Red-Oxide
14
1.66#
52312Z16G
Galvanized
16
1.44#
52312Z14G
Galvanized
14
1.71#
PRICE PER FOOT
ZEE & CEE PRICING NOTES AND INFORMATION:
1. The red-oxide finish on all members on this page meets or exceeds the performance characteristics of SSPC Paint No. 15, will have a 0.5 mil nominal thickness and
will be produced from pre-painted coil stock.
2. Length limits on members with Whirlwind’s Punch Pattern (any finish):
Simple or WH Punch Pattern or no punch ............................6’-0” to 52’-0”
WA or WD Punch Pattern.........................................................9’-2” to 52’-0”
WB or WE Punch Pattern .........................................................12’-6” to 52’-0”
WC or WF Punch Pattern .........................................................7’-0” to 52’-0”
3. For pricing, round lengths up to the nearest 3” increment - Parts shorter than 5’-0” are priced as minimum 5’-0” length.
4. Punching Charges:
Pattern WA:
Common Web ( for Simple Span, Short Lap, Long Lap, 3’ Offset, and Max Lap) ....................................$1.00 per zee or cee
Pattern WB:
Common Web (all laps available in Pattern WA plus 5’ Offset and Super Lap) ......................................$1.25 per zee or cee
Pattern WC:
Optional Web (for Pattern “C” Simple Span, Pattern “C” Short Lap, and Pattern “C” Long Lap) .......$1.00 per zee or cee
Pattern WD:
Common Flange ( for Simple Span, Short Lap, Long Lap, 3’ Offset, and Max Lap).................................$1.25 per zee or cee
Pattern WE:
Common Flange (all laps available in Pattern WB plus 5’ Offset and Super Lap) ..................................$1.50 per zee or cee
Pattern WF:
Optional Flange (all laps available in Pattern WC) ......................................................................................$1.25 per zee or cee
Simple Punch: Common Web End (one set of holes 1¾” from the end of the part) ..........................................................$0.50 per zee or cee
Pattern WH:
Optional Web (one set of end holes 1” from the end of the part)..............................................................$1.00 per zee or cee
All common patterns have the first set of holes 1¾” from the end of the part.
Special Punching .............................................................................................................................................................................$1.50 per zee or cee
5 See the Technical Information section for punching patterns and lap details.
CI-47
ROLL-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5214C12P
Red-Oxide
12
8.17#
5214C12G
Galvanized
12
8.35#
5212312C14P
Red-Oxide
14
4.77#
5212312C12P
Red-Oxide
12
7.11#
5212312C14G
Galvanized
14
4.91#
5212312C12G
Galvanized
12
7.26#
5212C14P
Red-Oxide
14
4.29#
5212C12P
Red-Oxide
12
6.39#
5212C14G
Galvanized
14
4.42#
5212C12G
Galvanized
12
6.53#
5210312C14P
Red-Oxide
14
4.29#
5210312C12P
Red-Oxide
12
6.39#
5210312C14G
Galvanized
14
4.42#
5210312C12G
Galvanized
12
6.53#
5210C16P
Red-Oxide
16
3.18#
5210C14P
Red-Oxide
14
3.81#
5210C12P
Red-Oxide
12
5.68#
5210C16G
Galvanized
16
3.30#
5210C14G
Galvanized
14
3.93#
5210C12G
Galvanized
12
5.80#
528312C16P
Red-Oxide
16
3.18#
528312C14P
Red-Oxide
14
3.81#
528312C12P
Red-Oxide
12
5.68#
528312C16G
Galvanized
16
3.30#
528312C14G
Galvanized
14
3.93#
528312C12G
Galvanized
12
5.80#
PRICE PER FOOT
14" x 4" Cee
12" x 3½"
Cee
12" x 2½"
Cee
10" x 3 ½"
Cee
10" x 2½"
Cee
8" x 3½"
Cee
1. See page CI-47 for all zee and cee pricing notes and information.
2. See the Technical Information section for punching patterns and lap details.
3. Add Suffix “SL” to the end of the item number for parts 5’-0” or shorter.
CI-48
ROLL-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
8" x 2½"
Cee
6" x 2½"
Cee
4" x 2½"
Cee
10" x 3 ½"
Cee
ITEM
NUMBER
FINSIH
GAUGE
WT./FT.
528C16P
Red-Oxide
16
2.78#
528C14P
Red-Oxide
14
3.33#
528C12P
Red-Oxide
12
4.97#
528C16G
Galvanized
16
2.89#
528C14G
Galvanized
14
3.43#
528C12G
Galvanized
12
5.07#
526C16P
Red-Oxide
16
2.39#
526C14P
Red-Oxide
14
2.85#
526C16G
Galvanized
16
2.47#
526C14G
Galvanized
14
2.94#
524C16P
Red-Oxide
16
1.99#
524C14P
Red-Oxide
14
2.38#
524C16G
Galvanized
16
2.06#
524C14G
Galvanized
14
2.45#
5242C16P
Red-Oxide
16
1.79#
5242C14P
Red-Oxide
14
2.14#
5242C16G
Galvanized
16
1.85#
5242C14G
Galvanized
14
2.20#
PRICE PER FOOT
ZEE & CEE PRICING NOTES AND INFORMATION:
1. The red-oxide finish on all members on this page meets or exceeds the performance characteristics of SSPC Paint No. 15, will have a 0.5 mil nominal thickness and
will be produced from pre-painted coil stock.
2. Length limits on members with Whirlwind’s Punch Pattern (any finish):
Simple or WH Punch Pattern or no punch ............................6’-0” to 52’-0”
WA or WD Punch Pattern.........................................................9’-2” to 52’-0”
WB or WE Punch Pattern .........................................................12’-6” to 52’-0”
WC or WF Punch Pattern .........................................................7’-0” to 52’-0”
3. For pricing, round lengths up to the nearest 3” increment - Parts shorter than 5’-0” are priced as minimum 5’-0” length.
4. Punching Charges:
Pattern WA:
Common Web ( for Simple Span, Short Lap, Long Lap, 3’ Offset, and Max Lap) ....................................$1.00 per zee or cee
Pattern WB:
Common Web (all laps available in Pattern WA plus 5’ Offset and Super Lap) ......................................$1.25 per zee or cee
Pattern WC:
Optional Web (for Pattern “C” Simple Span, Pattern “C” Short Lap, and Pattern “C” Long Lap) .......$1.00 per zee or cee
Pattern WD:
Common Flange ( for Simple Span, Short Lap, Long Lap, 3’ Offset, and Max Lap).................................$1.25 per zee or cee
Pattern WE:
Common Flange (all laps available in Pattern WB plus 5’ Offset and Super Lap) ..................................$1.50 per zee or cee
Pattern WF:
Optional Flange (all laps available in Pattern WC) ......................................................................................$1.25 per zee or cee
Simple Punch: Common Web End (one set of holes 1¾” from the end of the part) ..........................................................$0.50 per zee or cee
Pattern WH:
Optional Web (one set of end holes 1” from the end of the part)..............................................................$1.00 per zee or cee
All common patterns have the first set of holes 1¾” from the end of the part.
Special Punching .............................................................................................................................................................................$2.50 per zee or cee
5 See the Technical Information section for punching patterns and lap details.
CI-49
ROLL-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
12" x 5½" x 35⁄8"
Single-Sloped
Eave Strut
Specify Roof Slope
10" x 5½" x 2½"
Single -Sloped
Eave Strut
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5212ES12P
Red-Oxide
12
8.17#
5212ES12G
Galvanized
12
8.35#
5210ES14P
Red-Oxide
14
4.77#
5210ES12P
Red-Oxide
12
7.11#
5210ES14G
Galvanized
14
4.91#
5210ES12G
Galvanized
12
7.26#
528ES14P
Red-Oxide
14
4.29#
528ES12P
Red-Oxide
12
6.39#
528ES14G
Galvanized
14
4.42#
528ES12G
Galvanized
12
6.53#
526ES16P
Red-Oxide
16
2.78#
526ES14P
Red-Oxide
14
3.33#
256ES12P
Red-Oxide
12
4.97#
526ES16G
Galvanized
16
2.89#
526ES14G
Galvanized
14
3.43#
526ES12G
Galvanized
12
5.07#
524ES16P
Red-Oxide
16
2.39#
524ES14P
Red-Oxide
14
2.85#
524ES16P
Galvanized
16
2.47#
524ES14P
Galvanized
14
2.94#
PRICE PER FOOT
Specify Roof Slope
Specify Roof Slope
8" x 5½" x 2½"
Single-Sloped
Eave Strut
6" x 4" x 2½"
Single-Sloped
Eave Strut
Specify Roof Slope
Specify Roof Slope
NOTE: MAXIMUM LENGTH 25'-0"
4" x 4" x 2½"
Single-Sloped
Eave Strut
NOTE: MAXIMUM LENGTH 25'-0"
1. See page CI-52 for all eave strut pricing notes and information.
2. See the Technical Information section for punching patterns and lap details.
CI-50
COLD-FORMED SECONDARY MEMBERS
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5212ESDS12P
Red-Oxide
12
8.17#
5212ESDS12G
Galvanized
12
8.35#
5210ESDS14P
Red-Oxide
14
4.77#
5210ESDS12P
Red-Oxide
12
7.11#
5210ESDS14G
Galvanized
14
4.91#
5210ESDS12G
Galvanized
12
7.26#
528ESDS14P
Red-Oxide
14
4.29#
528ESDS12P
Red-Oxide
12
6.39#
528ESDS14G
Galvanized
14
4.42#
528ESDS12G
Galvanized
12
6.53#
526ESDS16P
Red-Oxide
16
2.78#
526ESDS14P
Red-Oxide
14
3.33#
256ESDS12P
Red-Oxide
12
4.97#
526ESDS16G
Galvanized
16
2.89#
526ESDS14G
Galvanized
14
3.43#
526ESDS12G
Galvanized
12
5.07#
524ESDS16P
Red-Oxide
16
2.39#
524ESDS14P
Red-Oxide
14
2.85#
524ESDS16P
Galvanized
16
2.47#
524ESDS14P
Galvanized
14
2.94#
SIZE & DESCRIPTION
Specify Roof Slope
12" x 5½" x 35⁄8"
Double-Sloped
Eave Strut
10" x 5½" x 2½"
Double-Sloped
Eave Strut
Specify Roof Slope
Specify Roof Slope
8" x 5½" x 2½"
Double-Sloped
Eave Strut
6" x 4" x 2½"
Double-Sloped
Eave Strut
Specify Roof Slope
Specify Roof Slope
NOTE: MAXIMUM LENGTH 25'-0"
4" x 4" x 2½"
Double-Sloped
Eave Strut
NOTE: MAXIMUM LENGTH 25'-0"
1. See page CI-54 for all eave strut pricing notes and information.
2. See the Technical Information section for punching patterns and lap details.
CI-51
PRICE PER FOOT
COLD-FORMED SECONDARY MEMBERS
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5210ESHS14P
Red-Oxide
14
4.77#
SIZE & DESCRIPTION
X X (IGH%AVE
3INGLE3LOPE
%AVE3TRUT
5210ESHS12P
Red-Oxide
12
7.11#
5210ESHS14G
Galvanized
14
4.91#
3PECIFY2OOF3LOPE
5210ESHS12G
Galvanized
12
7.26#
X X (IGH%AVE
$OUBLE3LOPE
%AVE3TRUT
5210HESDS14P
Red-Oxide
14
4.77#
5210HESDS12P
Red-Oxide
12
7.11#
5210HESDS14G
Galvanized
14
4.91#
3PECIFY2OOF3LOPE
5210HESDS12G
Galvanized
12
7.26#
X X (IGH%AVE
3INGLE3LOPE
%AVE3TRUT
528HES14P
Red-Oxide
14
4.29#
528HES12P
Red-Oxide
12
6.39#
528HES14G
Galvanized
14
4.42#
3PECIFY2OOF3LOPE
528HES12G
Galvanized
12
6.53#
X X (IGH%AVE
$OUBLE3LOPE
%AVE3TRUT
528HESDS14P
Red-Oxide
14
4.29#
528HESDS12P
Red-Oxide
12
6.39#
528HESDS14G
Galvanized
14
4.42#
3PECIFY2OOF3LOPE
528HESDS12G
Galvanized
12
6.53#
528UNES14P
Red-Oxide
14
4.77#
528UNES12P
Red-Oxide
12
7.11#
528UNES14G
Galvanized
14
4.91#
528UNES12G
Galvanized
12
7.26#
XX
5NIVERSAL
%AVE3TRUT
./4%&OROR2OOF3LOPE
PRICE PER FOOT
EAVE STRUTS PRICING NOTES AND INFORMATION::
1 The red-oxide finish on all members on this page meets or exceeds the performance characteristics of SSPC Paint No. 15, will have a 0.5 mil nominal thickness and will
be produced from pre-painted coil stock.
2. Length limits on eave struts (without incurring extra charges):
All Finishes ........................................................................................................................ 5’-0” to 40’-0” (unless noted otherwise)
3. For pricing, round lengths up to the nearest 3” increment - Parts shorter than 5’-0” are priced as minimum 5’-0” length.
4. 4-hole end punching is available on 12”, 10”, and 8” eave struts only to match our AB100, AC100, or AD100 clips.
5. Punching Charges:
Standard Pattern (first set of holes 1¾” from the end of the eave strut) ............... $0.50 per Eave Strut
Special Punching: ............................................................................................................ $1.50 per Eave Strut
6. See the Technical Information section for punching patterns and lap details.
CI-52
COLD-FORMED SECONDARY MEMBERS
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
5284C14P
Red-Oxide
14
4.29#
5284C12P
Red-Oxide
12
6.39#
5284C14G
Galvanized
14
4.42#
5284C12G
Galvanized
12
6.53#
52818CH16P
Red-Oxide
16
2.39#
52818CH14P
Red-Oxide
14
2.85#
52818CH16G
Galvanized
16
2.47#
52818CH14G
Galvanized
14
2.94#
52618CH16P
Red-Oxide
16
1.99#
52618CH14P
Red-Oxide
14
2.38#
52618CH16G
Galvanized
16
2.06#
52618CH14G
Galvanized
14
2.45#
52418CH16P
Red-Oxide
16
1.79#
52418CH14P
Red-Oxide
14
2.14#
52418CH16G
Galvanized
16
1.85#
52418CH14G
Galvanized
14
2.20#
SIZE & DESCRIPTION
X
#EE
bX
/PEN#HANNEL
./4%-!8)-5-,%.'4(g
bX
/PEN#HANNEL
./4%-!8)-5-,%.'4(g
bXb
/PEN#HANNEL
./4%-!8)-5-,%.'4(g
PRICE PER FOOT
PRICING NOTES AND INFORMATION:
1. The red-oxide finish on all members on this page meets or exceeds the performance characteristics of SSPC Paint No. 15, will have a 0.5 mil nominal thickness and
will be produced from pre-painted coil stock.
2. Length limits on cees and channels (without incurring extra charges):
All Finishes .............................................................................................................. 5’-0” to 40’-0” (unless noted otherwise)
3. For pricing, round lengths up to nearest 3” increment - Parts shorter than 5’-0” are priced as minimum 5’-0” length.
4. Special punching, if possible, is $2.50 per member.
5. See the Technical Information section for punching patterns and lap details.
CI-53
COLD-FORMED SECONDARY MEMBERS
SIZE & DESCRIPTION
X
!NGLE
OR
X
!NGLE
X
!NGLE
X
!NGLE
X
!NGLE
X
!NGLE
X !NGLE
ITEM
NUMBER
FINISH
GAUGE
WT./FT.
52A6416P
Red-Oxide
16
1.99#
52A6414P
Red-Oxide
14
2.38#
52A6416G
Galvanized
16
2.06#
52A6414G
Galvanized
14
2.45#
52A4316P
Red-Oxide
16
1.39#
52A4314P
Red-Oxide
14
1.66#
52A4316G
Galvanized
16
1.44#
52A4314G
Galvanized
14
1.71#
52A4261P
Red-Oxide
16
1.19#
52A4214P
Red-Oxide
14
1.42#
52A4216G
Galvanized
16
1.23#
52A4214G
Galvanized
14
1.46#
52A3316P
Red-Oxide
16
1.19#
52A3314P
Red-Oxide
14
1.42#
52A3316G
Galvanized
16
1.23#
52A3314G
Galvanized
14
1.46#
52A212216P
Red-Oxide
16
0.92#
52A212214P
Red-Oxide
14
1.11#
52A212216G
Galvanized
16
0.96#
52A212214G
Galvanized
14
1.14#
52A211214P
Red-Oxide
14
0.82#
52A211214G
Galvanized
14
0.85#
PRICE PER FOOT
PRICING NOTES AND INFORMATION:
1. The red-oxide finish on all members on this page meets or exceeds the performance characteristics of SSPC Paint No. 15, will have a 0.5 mil nominal thickness and will
be produced from pre-painted coil stock.
2. Length limits on cees and channels (without incurring extra charges):
All Finishes .................................................................................................................................................................. 5’-0” to 40’-0” (unless noted otherwise)
3. For pricing, round lengths up to nearest 3” increment - Parts shorter than 5’-0” are priced as minimum 5’-0” length.
4. Special punching, if possible, is $1.50 per member.
MATERIAL SPECIFICATIONS FOR ALL PRODUCTS ON PAGES CI-1 thru CI-8 and CI-44 thru CI-49:
1.
2.
3.
4.
Material used for all red-oxide members in this section conforms to the specifications of ASTM A1011, Grade 55 (55,000 psi minimum yield strength).
Material thickness for galvanized and GALVALUME PLUS® coated steel products always include the thickness of the coating.
Material used for all galvanized members in this section conforms to the specifications of ASTM A653, Grade 50, G90 Coating Class (50,000 psi minimum yield.)
Material used for all GALVALUME PLUS® members in this section conforms to the specifications of ASTM A792, Grade 50, AZ55 Coating Class (50,000 psi minimum
yield.)
5. Length tolerance on all members is ±1/4” of ordered length.
6. All weights shown are estimates of what actual materials would typically weigh. These weights are for reference and Whirlwind is not responsible for variances.
7. Whirlwind’s red-oxide components are painted with primers that are made for short-term field protection during the erection process. The finish is not intended as a
compatible base coat for any finish coats or formulated to prevent rust from appearing for any lengthy period. Handling scratches and abrasions are common and should
be expected to rust if not touched-up promptly. Whirlwind’s red-oxide touch-up paint is available for sale on the Accessories pages of this catalog.
CI-54
CUSTOM STRUCTURAL SHAPES
MATERIAL
16 GA. RED-OXIDE
14 GA. RED-OXIDE
12 GA. RED-OXIDE
N/A
7
3 ⁄16”
5
N/A
15
N/A
4 ⁄8”
5 ⁄16”
15
6 ⁄16”
N/A
77⁄16”
15
N/A
15
N/A
8 ⁄16”
9 ⁄16”
15
11 ⁄16”
1315⁄16”
STRIP WIDTH
1515⁄16”
1615⁄16”
N/A
15
17 ⁄16”
N/A
15
18 ⁄16”
N/A
15
19 ⁄16”
N/A
2015⁄16”
N/A
2215⁄16”
N/A
N/A
16 GA. GALVANIZED
14 GA. GALVANIZED
12 GA. GALVANIZED
37⁄16”
N/A
45⁄8”
15
N/A
15
N/A
7
N/A
15
N/A
5 ⁄16”
6 ⁄16”
7 ⁄16”
8 ⁄16”
15
9 ⁄16”
1115⁄16”
1315⁄16”
1515⁄16”
1715⁄16”
1915⁄16”
N/A
15
N/A
22 ⁄16”
N/A
PRICE YOUR OWN CUSTOM STRUCTURAL SHAPES:
1. Select the strip width of material to be used.
2. Prices in chart above are per Lineal Foot.
3. Add $0.17 for each break.
4. Pricing includes banding material for shipment.
NOTES:
1. Maximum closed angle is 45 degrees.
2. Hems cannot be fabricated.
3. Slight metal fracturing may occur at bend lines.
4. Minimum break dimension is 11⁄8”.
5. Maximum part length will vary depending on shape desired.
CI-55
6. All Shapes are subject to tolerances published by the MBMA
7. Not all coil sizes and/or finishes are stocked at every location. Check with your salesperson for availability and lead times.
CONNECTION CLIPS
ITEM
NUMBER
BOLT-ON GIRT CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
1.9#
PRICE EACH
RED-OXIDE
GALVANIZED
AC201
59AC201^
3
Holes 9/16” Diameter
Use to attach 10” girt. Requires (4) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
BOLT-ON GIRT CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
1.6#
PRICE EACH
RED-OXIDE
GALVANIZED
AB201
59AB201^
3
Holes 9/16” Diameter
Use to attach 8” girt. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
MAT’L THICKNESS
WT./EA.
59AE301
¼”
5.2#
PRICE EACH
BLACK

b
AE301
ITEM
NUMBER
Holes 9/16” Diameter
Use to attach 14” girt. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
MAT’L THICKNESS
WT./EA.
59AD301
¼”
4.7#
PRICE EACH
BLACK

b
AD301
ITEM
NUMBER
Holes 9/16” Diameter
Use to attach 12” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AC301
¼”
3.5#
PRICE EACH
BLACK

b
AC301
Holes 9/16” Diameter
Use to attach 10” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
CI-56
CONNECTION CLIPS
ITEM
NUMBER
SHOP WELDED CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
2.3#
PRICE EACH
BLACK
b
AB301

59AB301
3
Holes 9/16” Diameter
Use to attach 8” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AA301
¼”
2.6#
PRICE EACH
BLACK

b
AA301
Holes 9/16” Diameter
Use to attach 6” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AF301
¼”
1.8#
PRICE EACH
BLACK
 b
AF301
Holes 9/16” Diameter
Use to attach 4” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
⁄8”
6.5#
PRICE EACH
BLACK
SHOP WELDED CLIP
b
AE300
3

59AE300
Holes 9/16” Diameter
Use to attach 14” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
MAT’L THICKNESS
WT./EA.
⁄8”
5.9#
b
AD300
ITEM
NUMBER
SHOP WELDED CLIP
3

59AD300
Holes 9/16” Diameter
CI-57
Use to attach 12” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
PRICE EACH
BLACK
CONNECTION CLIPS
SHOP WELDED CLIP
MAT’L THICKNESS
WT./EA.
59AC300
¼”
2.9#
PRICE EACH
BLACK

b
AC300
ITEM
NUMBER
Holes 9/16” Diameter
Use to attach 10” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AB300
¼”
2.5#
PRICE EACH
BLACK

b
AB300
Holes 9/16” Diameter
Use to attach 8” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AA300
¼”
2.2#
PRICE EACH
BLACK

b
AA300
Holes 9/16” Diameter
Use to attach 6” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
SHOP WELDED CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AF300
¼”
1.5#
PRICE EACH
BLACK
 b
AF300
Holes 9/16” Diameter
Use to attach 4” by-pass zees or cees. Requires (4) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
BOLT-ON GIRT CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
7.5#
PRICE EACH
RED-OXIDE
GALVANIZED
AE201
b
b
3
59AE201^
Holes 9/16” Diameter
Use to attach 14” girt. Requires (4) ½”DIA x 1¼” A307 bolts.
CI-58
CONNECTION CLIPS
ITEM
NUMBER
BOLT-ON GIRT CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
6.8#
PRICE EACH
RED-OXIDE
GALVANIZED
AD201
b
b
3
59AD201^
Use to attach 12” girt. Requires (4) ½”DIA x 1¼” A307 bolts.
Holes 9/16” Diameter
BOLT-ON GIRT CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AK208^
8 GA
5.4#
PRICE EACH
RED-OXIDE
GALVANIZED
AK208
b
b
Holes 9/16” Diameter
Use to attach 12” or 14” girt to column. Requires (7) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
BOLT-ON GIRT CLIP
WT./EA.
⁄16”
2.9#
PRICE EACH
RED-OXIDE
GALVANIZED
AK200
MAT’L THICKNESS
3
59AK200^
Holes 9/16” Diameter
Use to attach 8” or 10” girt to column. Requires (4) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
BOLT-ON JAMB CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
2.2#
PRICE EACH
RED-OXIDE
GALVANIZED
AC207
b
b
3
59AC207^
b
b
Holes 9/16” Diameter
Use to attach 10” jamb to standard eave strut.Requires (4) ½”DIA x 1¼” A307 bolts.
ITEM
NUMBER
BOLT-ON JAMB CLIP
MAT’L THICKNESS
WT./EA.
⁄16”
1.6#
AB207
b b
59AB207^
3
Holes 9/16” Diameter
CI-59
Use to attach 8” jamb to standard eave strut. Requires (4) ½”DIA x 1¼” A307 bolts.
PRICE EACH
RED-OXIDE
GALVANIZED
CONNECTION CLIPS
ITEM
NUMBER
BOLT-ON COLUMN BASE CLIP
MAT’L THICKNESS
WT./EA.
⁄8”
6.8#
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59C235^
¼”
3.9#
PRICE EACH
RED-OXIDE
GALVANIZED
AK400
3
59AK400^
b
Holes 11/16” Diameter / Slots 13/16 x 1”
Requires (2) 5⁄8” DIA x 1½” A325 bolts.
BOLT-ON GIRT/PURLIN CLIP
PRICE EACH
RED-OXIDE
GALVANIZED
C235
Holes 9/16” Diameter
Use to attach 8” simple span cees to frame. Requires (6) ½”DIA x 1¼” A307 bolts.
BOLT-ON GIRT/PURLIN CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59C234^
¼”
3.4#
PRICE EACH
RED-OXIDE
GALVANIZED
C234

Holes 9/16” Diameter
Use to attach 6” simple span cees to frame. Requires (6) ½”DIA x 1¼” A307 bolts.
BOLT-ON GIRT/PURLIN CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59C233^
¼”
2.6#
PRICE EACH
RED-OXIDE
GALVANIZED
C233
 Holes 9/16” Diameter
Use to attach 4” simple span cees to frame. Requires (6) ½”DIA x 1¼” A307 bolts.
BOLTED EAVE STRUT CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AD100^
¼”
10.0#
PRICE EACH
RED-OXIDE
GALVANIZED
AD100
Holes 9/16” Diameter
Use to attach eave strut at 12” girt line. Requires (8) ½”DIA x 1¼” A307 bolts.
CI-60
CONNECTION CLIPS
BOLTED EAVE STRUT CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AC100^
¼”
8.5#
PRICE EACH
RED-OXIDE
GALVANIZED
AC100
Holes 9/16” Diameter
Use to attach eave strut at 10” girt line. Requires (8) ½”DIA x 1¼” A307 bolts.
BOLTED EAVE STRUT CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AB100^
¼”
7.6#
PRICE EACH
RED-OXIDE
GALVANIZED
AB100
Holes 9/16” Diameter
Use to attach eave strut at 8” girt line. Requires (8) ½”DIA x 1¼” A307 bolts.
LIGHT GAUGE ANGLE CLIP
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AK517^
14 GA.
0.6#
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AK518^
14 GA.
0.8#
ITEM
NUMBER
MAT’L THICKNESS
WT./EA.
59AK519^
14 GA.
1.1#
PRICE EACH
RED-OXIDE
GALVANIZED
AK517
Ð
No Holes
Use for 4” zee or cee attachment.
LIGHT GAUGE ANGLE CLIP
PRICE EACH
RED-OXIDE
GALVANIZED
AK518
Ð
No Holes
Use for 6” zee or cee attachment.
LIGHT GAUGE ANGLE CLIP
AK519
No Holes
CI-61
Ð
Use for 8” zee or cee attachment.
PRICE EACH
RED-OXIDE
GALVANIZED
STRUCTURAL MEMBERS
36 WIDE FLANGE BEAM
ITEM
NUMBER
55W6X9^
SECTION
W6 X 9
DEPTH
FLANGE
LENGTHS
WT./FT.
7
4”
20’ OR 40’
9#
7
5 ⁄8”
55W8X10^
W8 X 10
7 ⁄8”
4”
20’ OR 40’
10#
55W8X13^
W8 X 13
8”
4”
20’ OR 40’
13#
W8 X 18
1
5¼”
20’ OR 40’
18#
7
55W8X18^
55W10X12^
55W12X14^
8 ⁄8”
W10 X 12
9 ⁄8”
4”
20’ OR 40’
12#
W12 X 14
7
4”
20’ OR 40’
14#
11 ⁄8”
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
Other beam sizes available. Please inquire. *Galvanized members are subject to a $150 freight charge per order.
36 CHANNEL
ITEM
NUMBER
SECTION
DEPTH
FLANGE
LENGTHS
WT./FT.
55C4X5.4^
C4 X 5.4
4”
15⁄8”
20’ OR 40’
5.4#
55C5X6.7^
C5 X 6.7
5”
1¾”
20’ OR 40’
6.7#
55C6X8.2^
C6 X 8.2
6”
17⁄8”
20’ OR 40’
8.2#
55C7X9.8^
C7 X 9.8
7”
21⁄8”
20’ OR 40’
9.8#
55C8X11.5^
C8 X 11.5
8”
2¼”
20’ OR 40’
11.5#
55C9X13.4^
C9 X 13.4
9”
23⁄8”
20’ OR 40’
13.4#
55C10X15.3^
C10 X 15.3
10”
25⁄8”
20’ OR 40’
15.3#
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
Other beam sizes available. Please inquire. *Galvanized members are subject to a $150 freight charge per order.
36 I-BEAM
ITEM
NUMBER
SECTION
DEPTH
FLANGE
LENGTHS
WT./FT.
55S8X18.4^
S8 X 18.4
8”
4”
20’ OR 40’
18.4#
55S10X25.4^
S10 X 25.4
10”
45⁄8”
20’ OR 40’
25.4#
55S12X31.8^
S12 X 31.8
12”
5”
20’ OR 40’
31.8#
55S15X42.9^
S15 X 42.9
15”
5½”
20’ OR 40’
42.9#
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
*Galvanized members are subject to a $150 freight charge per order.
36 ANGLE
ITEM
NUMBER
SECTION
55L2218^
L 2” X 2”
1
52L33316^
L 3” X 3”
3
52L3314^
THICKNESS
LENGTHS
WT./FT.
⁄8”
20’ ONLY
1.7#
⁄16”
20’ OR 40’
3.7#
L 3” X 3”
¼”
20’ OR 40’
4.9#
52L4314^
L 4” X 3”
¼”
20’ OR 40’
5.8#
52L4338^
L 4” X 3”
3
⁄8”
20’ OR 40’
8.5#
52l4414^
L 4” X 4”
¼”
20’ OR 40’
6.6#
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
Other beam sizes available. Please inquire. *Galvanized members are subject to a $150 freight charge per order.
CI-62
STRUCTURAL MEMBERS
A500-B SQUARE TUBING
ITEM
NUMBER
SIZE
THICKNESS
AVAILABLE
LENGTHS
WT./FT.
55TUBE33120^
3” X 3”
0.120”
10’, 13’-4
& 20’
4.75#
55TUBE44120^
4” X 4”
0.120”
10’, 13’-4
& 20’
6.45#
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
*Galvanized members are subject to a $150 freight charge per order.
A53-B ROUND TUBING
ITEM
NUMBER
O.D.
THICKNESS
AVAILABLE
LENGTHS
55TUBE412156^
4½”
0.156”
11’-3, 15’ & 22’-6
55TUBE658156^
65⁄8”
0.156”
11’-3, 15’ & 22’-6
55TUBE658188^
65⁄8”
0.188”
11’-3, 15’ & 22’-6
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
*Galvanized members are subject to a $150 freight charge per order.
4-HOLE END PLATES
SHOP WELDED ONTO ABOVE TUBING
EACH PLATE HAS (4) 13⁄16”  HOLES IN THE PATTERN AS INDICATED
ITEM
NUMBER
SIZE
THICKNESS
HOLE
PATTERN
WT./
EA.
55EP^771
7” X 7”
¼”
5” X 5”
3.5#
8” X 8”
3
⁄8 ”
6” X 6”
6.8#
¾”
7” X 7”
21.3#
PRICE PER EACH
RED-OXIDE
*GALVANIZED
For 3” square tubing.
55EP^881
For 4” square tubing or 4½” round tubing.
*Galvanized plates will have an extra hole centered
in the middle for drainage and venting during
galvanizing.
CUT-TO-LENGTH BRACE RODS
EACH END WILL BE THREADED WITH 5” R.H. COARSE THREAD.
55EP^10101
10” X 10”
For 65⁄8” round tubing.
ITEM
NUMBER
DIAMETER
MAXIMUM
LENGTHS
WT./FT.
55BR^012
½”
40’-0”
0.7#
55BR^058
5
⁄8 ”
40’-0”
1.0#
55BR^034
¾”
40’-0”
1.5#
55BR^100
1”
40’-0”
2.7#
55BR^114
1 ¼”
40’-0”
4.2#
PRICE PER FOOT
RED-OXIDE
*GALVANIZED
All brace rods will priced to a 10’ minimum. For brace rod hardware, see ACCESSORIES section. *Galvanized members are subject to a $150 freight
charge per order.
CI-63
Standing Seam/
Architectural
Back to
Contents
TABLE OF CONTENTS
Standing Seam/Architectural Products
Product
Page
General Information.................................................................................................................................................................................SSAR-1
Super Seam-II Panel, Super Seam-Plus Panel (24”, 18”, or 12” coverage) ................................................................SSAR-2 – SSAR-5
Weather Lok-16 Panel (16” coverage) ...............................................................................................................................SSAR-6 – SSAR-7
Weather Snap-16 (16” coverage)........................................................................................................................................SSAR-8 – SSAR-9
Accent-11 Panel (11” coverage) & Accent-11R Panel (11” coverage) ........................................................................................SSAR-10
Shadow Wall-18 Panel (18” coverage) ..............................................................................................................................................SSAR-11
Trims
Shadow Gutter, Oversize Gutter, Gutter Strap, Gutter End Caps, Gutter Counterflashing ..................... SSAR-12 – SSAR-14
Downspout, Downspout Straps ............................................................................................................................................... SSAR-14
Low Side Shadow Eave Trim, Low Side Shadow Eave Trim Concealed Clip,
Floating Cleat, Simple Eave Trim .......................................................................................................................... SSAR-14 - SSAR-15
High Side Shadow Eave Trim, High Side Shadow Eave Trim Concealed Clip ............................................. SSAR-15 – SSAR 18
Starter Zee, Shadow Rake Trim, Shadow Rake Trim Closure, Shadow Rake Trim Concealed Clips
Shadow Rake End Cap, Backing Trim .................................................................................................................... SSAR-15 - SSAR-18
Shadow Corner Box, Shadow Peak Box ................................................................................................................................ SSAR-18
Transition Trim ............................................................................................................................................................................ SSAR-19
Ridge Cap .................................................................................................................................................................................... SSAR-19
Hip Trim, Valley Trim .............................................................................................................................................. SSAR-19 – SSAR-21
Rib Covers .................................................................................................................................................................................... SSAR-21
Super Seam-Plus Repair Cap ....................................................................................................................................................SSAR-22
Weather Snap-16 Z-Clousre, Offset Cleat, Parapet Rake Cleat, Parapet Flashing ......................................................... SSAR-22
Accent-11 Spacer Trim, Splice Trim, Jamb Trim, Cap Trim, Transition Trim, Soffit Trim ............................. SSAR-23 – SSAR-24
Shadow Wall-18 Spacer Trim, Head Trim, Jamb Trim, Outside Corner Trim, Inside Corner Trim, Base Trim, Cap Trim,
Sill Trim, Cover Trim, Splice Trim, Masonry Trim ............................................................................................... SSAR-24 – SSAR-26
Flat Trim Sheets .......................................................................................................................................................................... SSAR-27
Special Trim ................................................................................................................................................................................ SSAR-28
..........................................................................................................................................................................................................SSAR-27
Accessories
Standing Seam Panel Clips ....................................................................................................................................................... SSAR-29
Standing Seam Thermal Spacers ...............................................................................................................................................SSAR-30
Standing Seam Eave Plates, Rake Plates, Ridge Channel, Back-Up Plates, End Clip Valley Plates
Hip Plates, Backing Angles, Bearing Plates ....................................................................................................... SSAR-30– SSAR-34
Standing Seam Inside and Outside Closures ........................................................................................................................ SSAR-34
Standing Seam Tube Caulk, Tape Sealant ............................................................................................................................. SSAR-35
Standing Seam Utility Clamps, Wind Clamps ........................................................................................................................ SSAR-36
Standing Seam Spacer Bar, Shaping Tool, Hand Seamer, Panel Hemming Tool .............................................................SSAR-36
Standing Seam Vents, Vent Hardware ................................................................................................................................... SSAR-37
Standing Seam Light Transmitting Panels ............................................................................................................................. SSAR-38
Vinyl Insulation, Poultry Netting, Insulation Tape ...................................................................................................................SSAR-38
Standing Seam Fasteners ..................................................................................................................................... SSAR-39 – SSAR-43
Shadow Wall-18 Fab Lok Fasteners, Alternate Attachment Angle, Closure Plugs ..........................................................SSAR-43
TABLE OF CONTENTS
This page intentionally left blank.
GENERAL INFORMATION
Standing Seam and Architectural Product Line - General Information
With over 50 year’s experience, Whirlwind is a quality manufacturer of metal roofing, siding, accessories, and trim
for the Standing Seam and Architectural market. We currently carry four standing seam panels, one concealed
fastener wall panel and two concealed fastener soffit/liner panels, offered in a variety of Kynar colors with 35 year
Warranties. In addition Whirlwind also offers energy star approved and CRRC approved colors. All of Whirlwind’s
material contains a minimum of 32% up to 59% recycled content making Whirlwind’s material environmentally
friendly.
Sample Standing Seam/Architectural Projects:
Strippable film is available on Weather Lok
and Weather Snap panels. Please see those
sections for further details and pricing.
SSAR-1
STANDING SEAM PANEL PRICING
Panel Width (24", 18", or 12")
3"
3"
Panel Width (24", 18", or 12")
SUPER SEAM-II
SUPER SEAM-PLUS
FINISH
BASE METAL
GAUGE
PANEL
WIDTH
MINIMUM
THICKNESS
WEIGHT PER
SQUARE
KYNAR 500® Colors
GALVALUME®
24
24”
.0230”
129
Clear Acrylic
®
GALVALUME
24
24”
.0230”
129
KYNAR 500® Colors
GALVALUME®
24
18”
.0230”
137
100 Squares
®
24
18”
.0230”
137
100 Squares
KYNAR 500 Colors
®
GALVALUME
24
12”
.0230”
154
100 Squares
Clear Acrylic
GALVALUME®
24
12”
.0230”
154
100 Squares
Clear Acrylic
®
GALVALUME
PRICE PER
SQUARE
PRICE PER
LFT.
MINIMUM
ORDER
Consult the Super Seam-II Technical/Erection Manual or the Super Seam-Plus Technical/Erection Manual for proper product application, design details, and
additional product information.
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.65 for panels 3” to 2’-9” or $1.85 for panels 2’-10” to 3’-11”.
3. All prices include standard packaging.
4. All panels are factory notched on each end.
5. All panels have factory applied hot-melt mastic in the side lap.
6. All panels are factory punched. Punches may be deleted as required.
7. Prices DO NOT include required clips, fasteners or other attaching hardware.
8. 12” width panels have no minor ribs.
9. 12” and 18” width panels require special set-up and extended lead times.
10. Clear acrylic-coated GALVALUME® is GALVALUME® coated with a thin acrylic film intended to increase its resistance to fingerprinting and handling marks
and eliminate the use of oil in the forming process. It is not a warranted film and may discolor while weathering.
11. Super Seam-Plus™ requires a mechanical seamer to form the panel side laps. Seamer rental is required.
12. For factory applied UL Labels (UL 2218 Impact, UL Class A Fire, and UL Class 90 Uplift Resistance) Labels add $1.00 per panel.
PACKAGE PRICING:
1. 25 panels per Super Seam-II™ bundle or 22 panels per Super Seam-Plus™ bundle, with a maximum of 3000# per bundle.
2. Standard packaging............................................$1.25 per lineal foot of bundle, $20.00 minimum
3. Waterproof wrap..................................................$ .40 per lineal foot of bundle
4. LTL shipments require plywood crating.
5. Plywood crating...................................................$8.75 per square, $107.50 minimum
6. Please consult your salesperson for special packaging prices.
NOTES:
1. Oil-canning is not a cause for rejection - no exceptions.
2. For panel lengths exceeding 45’-0”, please inquire.
3. Panel pricing reflects colors available on the current Standing Seam/Architectural Panel Color Selection Chart. For gauges not listed or special colors,
please inquire.
4. 12” and 18” panel widths are only available in Galvalume and may require extended lead times and minimum orders.
®
SSAR-2
SS PANEL SQUARE FOOTAGE CHART
•SUPER SEAM-II (24” COVERAGE)
•SUPER SEAM-PLUS (24” COVERAGE)
NUMBER OF SQUARE FEET PER PANEL
SSAR-3
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
45’
2.00
4.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
30.00
32.00
34.00
36.00
38.00
40.00
42.00
44.00
46.00
48.00
50.00
52.00
54.00
56.00
58.00
60.00
62.00
64.00
66.00
68.00
70.00
72.00
74.00
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
2.17
4.17
6.17
8.17
10.17
12.17
14.17
16.17
18.17
20.17
22.17
24.17
26.17
28.17
30.17
32.17
34.17
36.17
38.17
40.17
42.17
44.17
46.17
48.17
50.17
52.17
54.17
56.17
58.17
60.17
62.17
64.17
66.17
68.17
70.17
72.17
74.17
76.17
78.17
80.17
82.17
84.17
86.17
88.17
90.17
2.33
4.33
6.33
8.33
10.33
12.33
14.33
16.33
18.33
20.33
22.33
24.33
26.33
28.33
30.33
32.33
34.33
36.33
38.33
40.33
42.33
44.33
46.33
48.33
50.33
52.33
54.33
56.33
58.33
60.33
62.33
64.33
66.33
68.33
70.33
72.33
74.33
76.33
78.33
80.33
82.33
84.33
86.33
88.33
90.33
2.50
4.50
6.50
8.50
10.50
12.50
14.50
16.50
18.50
20.50
22.50
24.50
26.50
28.50
30.50
32.50
34.50
36.50
38.50
40.50
42.50
44.50
46.50
48.50
50.50
52.50
54.50
56.50
58.50
60.50
62.50
64.50
66.50
68.50
70.50
72.50
74.50
76.50
78.50
80.50
82.50
84.50
86.50
88.50
90.50
2.67
4.67
6.67
8.67
10.67
12.67
14.67
16.67
18.67
20.67
22.67
24.67
26.67
28.67
30.67
32.67
34.67
36.67
38.67
40.67
42.67
44.67
46.67
48.67
50.67
52.67
54.67
56.67
58.67
60.67
62.67
64.67
66.67
68.67
70.67
72.67
74.67
76.67
78.67
80.67
82.67
84.67
86.67
88.67
90.67
2.83
4.83
6.83
8.83
10.83
12.83
14.83
16.83
18.83
20.83
22.83
24.83
26.83
28.83
30.83
32.83
34.83
36.83
38.83
40.83
42.83
44.83
46.83
48.83
50.83
52.83
54.83
56.83
58.83
60.83
62.83
64.83
66.83
68.83
70.83
72.83
74.83
76.83
78.83
80.83
82.83
84.83
86.83
88.83
90.83
3.00
5.00
7.00
9.00
11.00
13.00
15.00
17.00
19.00
21.00
23.00
25.00
27.00
29.00
31.00
33.00
35.00
37.00
39.00
41.00
43.00
45.00
47.00
49.00
51.00
53.00
55.00
57.00
59.00
61.00
63.00
65.00
67.00
69.00
71.00
73.00
75.00
77.00
79.00
81.00
83.00
85.00
87.00
89.00
91.00
3.00
5.00
7.00
9.00
11.00
13.00
15.00
17.00
19.00
21.00
23.00
25.00
27.00
29.00
31.00
33.00
35.00
37.00
39.00
41.00
43.00
45.00
47.00
49.00
51.00
53.00
55.00
57.00
59.00
61.00
63.00
65.00
67.00
69.00
71.00
73.00
75.00
77.00
79.00
81.00
83.00
85.00
87.00
89.00
91.00
3.33
5.33
7.33
9.33
11.33
13.33
15.33
17.33
19.33
21.33
23.33
25.33
27.33
29.33
31.33
33.33
35.33
37.33
39.33
41.33
43.33
45.33
47.33
49.33
51.33
53.33
55.33
57.33
59.33
61.33
63.33
65.33
67.33
69.33
71.33
73.33
75.33
77.33
79.33
81.33
83.33
85.33
87.33
89.33
91.33
3.50
5.50
7.50
9.50
11.50
13.50
15.50
17.50
19.50
21.50
23.50
25.50
27.50
29.50
31.50
33.50
35.50
37.50
39.50
41.50
43.50
45.50
47.50
49.50
51.50
53.50
55.50
57.50
59.50
61.50
63.50
65.50
67.50
69.50
71.50
73.50
75.50
77.50
79.50
81.50
83.50
85.50
87.50
89.50
91.50
3.67
5.67
7.67
9.67
11.67
13.67
15.67
17.67
19.67
21.67
23.67
25.67
27.67
29.67
31.67
33.67
35.67
37.67
39.67
41.67
43.67
45.67
47.67
49.67
51.67
53.67
55.67
57.67
59.67
61.67
63.67
65.67
67.67
69.67
71.67
73.67
75.67
77.67
79.67
81.67
83.67
85.67
87.67
89.67
91.67
3.83
5.83
7.83
9.83
11.83
13.83
15.83
17.83
19.83
21.83
23.83
25.83
27.83
29.83
31.83
33.83
35.83
37.83
39.83
41.83
43.83
45.83
47.83
49.83
51.83
53.83
55.83
57.83
59.83
61.83
63.83
65.83
67.83
69.83
71.83
73.83
75.83
77.83
79.83
81.83
83.83
85.83
87.83
89.83
91.83
SS PANEL SQUARE FOOTAGE CHART
•SUPER SEAM-II (18” COVERAGE)
•SUPER SEAM-PLUS (18” COVERAGE)
NUMBER OF SQUARE FEET PER PANEL
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
45’
1.50
3.00
4.50
6.00
7.50
9.00
10.50
12.00
13.50
15.00
16.50
18.00
19.50
21.00
22.50
24.00
25.50
27.00
28.50
30.00
31.50
33.00
34.50
36.00
37.50
39.00
40.50
42.00
43.50
45.00
46.50
48.00
49.50
51.00
52.50
54.00
55.50
57.00
58.50
60.00
61.50
63.00
64.50
66.00
67.50
1.63
3.13
4.63
6.13
7.63
9.13
10.63
12.13
13.63
15.13
16.63
18.13
19.63
21.13
22.63
24.13
25.63
27.13
28.63
30.13
31.63
33.13
34.63
36.13
37.63
39.13
40.63
42.13
43.63
45.13
46.63
48.13
49.63
51.13
52.63
54.13
55.63
57.13
58.63
60.13
61.63
63.13
64.63
66.13
67.63
1.75
3.25
4.75
6.25
7.75
9.25
10.75
12.25
13.75
15.25
16.75
18.25
19.75
21.25
22.75
24.25
25.75
27.25
28.75
30.25
31.75
33.25
34.75
36.25
37.75
39.25
40.75
42.25
43.75
45.25
46.75
48.25
49.75
51.25
52.75
54.25
55.75
57.25
58.75
60.25
61.75
63.25
64.75
66.25
67.75
1.88
3.38
4.88
6.38
7.88
9.38
10.88
12.38
13.88
15.38
16.88
18.38
19.88
21.38
22.88
24.38
25.88
27.38
28.88
30.38
31.88
33.38
34.88
36.38
37.88
39.38
40.88
42.38
43.88
45.38
46.88
48.38
49.88
51.38
52.88
54.38
55.88
57.38
58.88
60.38
61.88
63.38
64.88
66.38
67.88
2.00
3.50
5.00
6.50
8.00
9.50
11.00
12.50
14.00
15.50
17.00
18.50
20.00
21.50
23.00
24.50
26.00
27.50
29.00
30.50
32.00
33.50
35.00
36.50
38.00
39.50
41.00
42.50
44.00
45.50
47.00
48.50
50.00
51.50
53.00
54.50
56.00
57.50
59.00
60.50
62.00
63.50
65.00
66.50
68.00
2.13
3.63
5.13
6.63
8.13
9.63
11.13
12.63
14.13
15.63
17.13
18.63
20.13
21.63
23.13
24.63
26.13
27.63
29.13
30.63
32.13
33.63
35.13
36.63
38.13
39.63
41.13
42.63
44.13
45.63
47.13
48.63
50.13
51.63
53.13
54.63
56.13
57.63
59.13
60.63
62.13
63.63
65.13
66.63
68.13
2.25
3.75
5.25
6.75
8.25
9.75
11.25
12.75
14.25
15.75
17.25
18.75
20.25
21.75
23.25
24.75
26.25
27.75
29.25
30.75
32.25
33.75
35.25
36.75
38.25
39.75
41.25
42.75
44.25
45.75
47.25
48.75
50.25
51.75
53.25
54.75
56.25
57.75
59.25
60.75
62.25
63.75
65.25
66.75
68.25
2.38
3.88
5.38
6.88
8.38
9.88
11.38
12.88
14.38
15.88
17.38
18.88
20.38
21.88
23.38
24.88
26.38
27.88
29.38
30.88
32.38
33.88
35.38
36.88
38.38
39.88
41.38
42.88
44.38
45.88
47.38
48.88
50.38
51.88
53.38
54.88
56.38
57.88
59.38
60.88
62.38
63.88
65.38
66.88
68.38
2.50
4.00
5.50
7.00
8.50
10.00
11.50
13.00
14.50
16.00
17.50
19.00
20.50
22.00
23.50
25.00
26.50
28.00
29.50
31.00
32.50
34.00
35.50
37.00
38.50
40.00
41.50
43.00
44.50
46.00
47.50
49.00
50.50
52.00
53.50
55.00
56.50
58.00
59.50
61.00
62.50
64.00
65.50
67.00
68.50
2.63
4.13
5.63
7.13
8.63
10.13
11.63
13.13
14.63
16.13
17.63
19.13
20.63
22.13
23.63
25.13
26.63
28.13
29.63
31.13
32.63
34.13
35.63
37.13
38.63
40.13
41.63
43.13
44.63
46.13
47.63
49.13
50.63
52.13
53.63
55.13
56.63
58.13
59.63
61.13
62.63
64.13
65.63
67.13
68.63
2.75
4.25
5.75
7.25
8.75
10.25
11.75
13.25
14.75
16.25
17.75
19.25
20.75
22.25
23.75
25.25
26.75
28.25
29.75
31.25
32.75
34.25
35.75
37.25
38.75
40.25
41.75
43.25
44.75
46.25
47.75
49.25
50.75
52.25
53.75
55.25
56.75
58.25
59.75
61.25
62.75
64.25
65.75
67.25
68.75
2.88
4.38
5.88
7.38
8.88
10.38
11.88
13.38
14.88
16.38
17.88
19.38
20.88
22.38
23.88
25.38
26.88
28.38
29.88
31.38
32.88
34.38
35.88
37.38
38.88
40.38
41.88
43.38
44.88
46.38
47.88
49.38
50.88
52.38
53.88
55.38
56.88
58.38
59.88
61.38
62.88
64.38
65.88
67.38
68.88
SSAR-4
SS PANEL SQUARE FOOTAGE CHART
•SUPER SEAM-II (12” COVERAGE)
•SUPER SEAM-PLUS (12” COVERAGE)
NUMBER OF SQUARE FEET PER PANEL
SSAR-5
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
45’
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.00
22.00
23.00
24.00
25.00
26.00
27.00
28.00
29.00
30.00
31.00
32.00
33.00
34.00
35.00
36.00
37.00
38.00
39.00
40.00
41.00
42.00
43.00
44.00
45.00
1.09
2.09
3.09
4.09
5.09
6.09
7.09
8.09
9.09
10.09
11.09
12.09
13.09
14.09
15.09
16.09
17.09
18.09
19.09
20.09
21.09
22.09
23.09
24.09
25.09
26.09
27.09
28.09
29.09
30.09
31.09
32.09
33.09
34.09
35.09
36.09
37.09
38.09
39.09
40.09
41.09
42.09
43.09
44.09
45.09
1.17
2.17
3.17
4.17
5.17
6.17
7.17
8.17
9.17
10.17
11.17
12.17
13.17
14.17
15.17
16.17
17.17
18.17
19.17
20.17
21.17
22.17
23.17
24.17
25.17
26.17
27.17
28.17
29.17
30.17
31.17
32.17
33.17
34.17
35.17
36.17
37.17
38.17
39.17
40.17
41.17
42.17
43.17
44.17
45.17
1.25
2.25
3.25
4.25
5.25
6.25
7.25
8.25
9.25
10.25
11.25
12.25
13.25
14.25
15.25
16.25
17.25
18.25
19.25
20.25
21.25
22.25
23.25
24.25
25.25
26.25
27.25
28.25
29.25
30.25
31.25
32.25
33.25
34.25
35.25
36.25
37.25
38.25
39.25
40.25
41.25
42.25
43.25
44.25
45.25
1.34
2.34
3.34
4.34
5.34
6.34
7.34
8.34
9.34
10.34
11.34
12.34
13.34
14.34
15.34
16.34
17.34
18.34
19.34
20.34
21.34
22.34
23.34
24.34
25.34
26.34
27.34
28.34
29.34
30.34
31.34
32.34
33.34
34.34
35.34
36.34
37.34
38.34
39.34
40.34
41.34
42.34
43.34
44.34
45.34
1.42
2.42
3.42
4.42
5.42
6.42
7.42
8.42
9.42
10.42
11.42
12.42
13.42
14.42
15.42
16.42
17.42
18.42
19.42
20.42
21.42
22.42
23.42
24.42
25.42
26.42
27.42
28.42
29.42
30.42
31.42
32.42
33.42
34.42
35.42
36.42
37.42
38.42
39.42
40.42
41.42
42.42
43.42
44.42
45.42
1.50
2.50
3.50
4.50
5.50
6.50
7.50
8.50
9.50
10.50
11.50
12.50
13.50
14.50
15.50
16.50
17.50
18.50
19.50
20.50
21.50
22.50
23.50
24.50
25.50
26.50
27.50
28.50
29.50
30.50
31.50
32.50
33.50
34.50
35.50
36.50
37.50
38.50
39.50
40.50
41.50
42.50
43.50
44.50
45.50
1.59
2.59
3.59
4.59
5.59
6.59
7.59
8.59
9.59
10.59
11.59
12.59
13.59
14.59
15.59
16.59
17.59
18.59
19.59
20.59
21.59
22.59
23.59
24.59
25.59
26.59
27.59
28.59
29.59
30.59
31.59
32.59
33.59
34.59
35.59
36.59
37.59
38.59
39.59
40.59
41.59
42.59
43.59
44.59
45.59
1.67
2.67
3.67
4.67
5.67
6.67
7.67
8.67
9.67
10.67
11.67
12.67
13.67
14.67
15.67
16.67
17.67
18.67
19.67
20.67
21.67
22.67
23.67
24.67
25.67
26.67
27.67
28.67
29.67
30.67
31.67
32.67
33.67
34.67
35.67
36.67
37.67
38.67
39.67
40.67
41.67
42.67
43.67
44.67
45.67
1.75
2.75
3.75
4.75
5.75
6.75
7.75
8.75
9.75
10.75
11.75
12.75
13.75
14.75
15.75
16.75
17.75
18.75
19.75
20.75
21.75
22.75
23.75
24.75
25.75
26.75
27.75
28.75
29.75
30.75
31.75
32.75
33.75
34.75
35.75
36.75
37.75
38.75
39.75
40.75
41.75
42.75
43.75
44.75
45.75
1.84
2.84
3.84
4.84
5.84
6.84
7.84
8.84
9.84
10.84
11.84
12.84
13.84
14.84
15.84
16.84
17.84
18.84
19.84
20.84
21.84
22.84
23.84
24.84
25.84
26.84
27.84
28.84
29.84
30.84
31.84
32.84
33.84
34.84
35.84
36.84
37.84
38.84
39.84
40.84
41.84
42.84
43.84
44.84
45.84
1.92
2.92
3.92
4.92
5.92
6.92
7.92
8.92
9.92
10.92
11.92
12.92
13.92
14.92
15.92
16.92
17.92
18.92
19.92
20.92
21.92
22.92
23.92
24.92
25.92
26.92
27.92
28.92
29.92
30.92
31.92
32.92
33.92
34.92
35.92
36.92
37.92
38.92
39.92
40.92
41.92
42.92
43.92
44.92
45.92
STANDING SEAM PANEL PRICING
2"
16" Coverage
WEATHER LOK-16TM
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
KYNAR 500® COLORS
GALVALUME PLUS®
24
146
CLEAR ACRYLIC
GALVALUME PLUS®
24
146
PRICE PER
SQUARE
PRICE PER
LFT.
MINIMUM
ORDER
Consult the Weather Lok-16™ Technical/Erection Manual for proper product application, design details, and additional product information.
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.65 for panels 3” to 2’-9” or $1.85 for panels 2’-10” to 3’-11”.
3. All prices include standard packaging.
4. Light striations in the panels are standard. Panels will be striated unless specifically stated otherwise.
5. Non-striated panel set-up charge is $150.00.
6. All panels are factory notched on each end but NOT punched or swaged.
7. All panels have factory applied mastic in the side lap.
8. Prices do not include required clips, fasteners or other attaching hardware.
9. Clear acrylic-coated GALVALUME® is GALVALUME® coated with a thin acrylic film intended to increase its resistance to fingerprinting and handling marks
and eliminate the use of oil in the forming process. It is not a warranted film and may discolor while weathering.
10. Weather Lok-16™ requires a mechanical seamer to form the panel side laps. Seamer rental is required.
11. For factory applied UL Labels (UL 2218 Impact, UL Class A Fire, and UL Class 90 Uplift Resistance) Labels add $1.00 per panel.
PACKAGE PRICING:
1. 20 panels per bundle, with a maximum of 3000# per bundle.
2. Standard packaging includes blocking and banding with protective strippable film on the female side of the panel.
3. LTL shipments require plywood crating.
4. Plywood crating...................................................$8.75 per square, $107.50 minimum
5. Please consult your salesperson for special packaging prices.
NOTES:
1. Oil-canning is not a cause for rejection - no exceptions.
2. Panel pricing reflects colors available on the current Standing Seam/Architectural Panel Color Selection Chart. For gauges not listed or special colors,
please inquire.
3. For panel lengths exceeding 45’-0”, please inquire.
4. For gauges not listed and/or special colors, please inquire.
5. Strippable film must be removed within 7 days of arrival to prevent permanent adhesion. See General Information on page __ for sample strippable film
label.
®
SSAR-6
SS PANEL SQUARE FOOTAGE CHART
•WEATHER LOK-16 (16” COVERAGE)
NUMBER OF SQUARE FEET PER PANEL
SSAR-7
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
45’
1.33
2.67
4.00
5.33
6.67
8.00
9.33
10.67
12.00
13.33
14.67
16.00
17.33
18.67
20.00
21.33
22.67
24.00
25.33
26.67
28.00
29.33
30.67
32.00
33.33
34.67
36.00
37.33
38.67
40.00
41.33
42.67
44.00
45.33
46.67
48.00
49.33
50.67
52.00
53.33
54.67
56.00
57.33
58.67
60.00
1.44
2.78
4.11
5.44
6.78
8.11
9.44
10.78
12.11
13.44
14.78
16.11
17.44
18.78
20.11
21.44
22.78
24.11
25.44
26.78
28.11
29.44
30.78
32.11
33.44
34.78
36.11
37.44
38.78
40.11
41.44
42.78
44.11
45.44
46.78
48.11
49.44
50.78
52.11
53.44
54.78
56.11
57.44
58.78
60.11
1.56
2.89
4.22
5.56
6.89
8.22
9.56
10.89
12.22
13.56
14.89
16.22
17.56
18.89
20.22
21.56
22.89
24.22
25.56
26.89
28.22
29.56
30.89
32.22
33.56
34.89
36.22
37.56
38.89
40.22
41.56
42.89
44.22
45.56
46.89
48.22
49.56
50.89
52.22
53.56
54.89
56.22
57.55
58.89
60.22
1.67
3.00
4.33
5.67
7.00
8.33
9.67
11.00
12.33
13.67
15.00
16.33
17.67
19.00
20.33
21.67
23.00
24.33
25.67
27.00
28.33
29.67
31.00
32.33
33.67
35.00
36.33
37.67
39.00
40.33
41.67
43.00
44.33
45.67
47.00
48.33
49.67
51.00
52.33
53.67
55.00
56.33
57.67
59.00
60.33
1.78
3.11
4.44
5.78
7.11
8.44
9.78
11.11
12.44
13.78
15.11
16.44
17.78
19.11
20.44
21.78
23.11
24.44
25.78
27.11
28.44
29.78
31.11
32.44
33.78
35.11
36.44
37.78
39.11
40.44
41.78
43.11
44.44
45.78
47.11
48.44
49.78
51.11
52.44
53.78
55.11
56.44
57.78
59.11
60.44
1.89
3.22
4.56
5.89
7.22
8.56
9.89
11.22
12.56
13.89
15.22
16.56
17.89
19.22
20.56
21.89
23.22
24.56
25.89
27.22
28.56
29.89
31.22
32.56
33.89
35.22
36.56
37.89
39.22
40.56
41.89
43.22
44.56
45.89
47.22
48.56
49.89
51.22
52.56
53.89
55.22
56.55
57.89
59.22
60.55
2.00
3.33
4.67
6.00
7.33
8.67
10.00
11.33
12.67
14.00
15.33
16.67
18.00
19.33
20.67
22.00
23.33
24.67
26.00
27.33
28.67
30.00
31.33
32.67
34.00
35.33
36.67
38.00
39.33
40.67
42.00
43.33
44.67
46.00
47.33
48.67
50.00
51.33
52.67
54.00
55.33
56.67
58.00
59.33
60.67
2.11
3.44
4.78
6.11
7.44
8.78
10.11
11.44
12.78
14.11
15.44
16.78
18.11
19.44
20.78
22.11
23.44
24.78
26.11
27.44
28.78
30.11
31.44
32.78
34.11
35.44
36.78
38.11
39.44
40.78
42.11
43.44
44.78
46.11
47.44
48.78
50.11
51.44
52.78
54.11
55.44
56.78
58.11
59.44
60.78
2.22
3.56
4.89
6.22
7.56
8.89
10.22
11.56
12.89
14.22
15.56
16.89
18.22
19.56
20.89
22.22
23.56
24.89
26.22
27.56
28.89
30.22
31.56
32.89
34.22
35.56
36.89
38.22
39.56
40.89
42.22
43.56
44.89
46.22
47.56
48.89
50.22
51.56
52.89
54.22
55.55
56.89
58.22
59.55
60.89
2.33
3.67
5.00
6.33
7.67
9.00
10.33
11.67
13.00
14.33
15.67
17.00
18.33
19.67
21.00
22.33
23.67
25.00
26.33
27.67
29.00
30.33
31.67
33.00
34.33
35.67
37.00
38.33
39.67
41.00
42.33
43.67
45.00
46.33
47.67
49.00
50.33
51.67
53.00
54.33
55.67
57.00
58.33
59.67
61.00
2.44
3.78
5.11
6.44
7.78
9.11
10.44
11.78
13.11
14.44
15.78
17.11
18.44
19.78
21.11
22.44
23.78
25.11
26.44
27.78
29.11
30.44
31.78
33.11
34.44
35.78
37.11
38.44
39.78
41.11
42.44
43.78
45.11
46.44
47.78
49.11
50.44
51.78
53.11
54.44
55.78
57.11
58.44
59.78
61.11
2.56
3.89
5.22
6.56
7.89
9.22
10.56
11.89
13.22
14.56
15.89
17.22
18.56
19.89
21.22
22.56
23.89
25.22
26.55
27.89
29.22
30.55
31.89
33.22
34.55
35.89
37.22
38.55
39.89
41.22
42.55
43.89
45.22
46.55
47.89
49.22
50.55
51.89
53.22
54.55
55.89
57.22
58.55
59.89
61.22
STANDING SEAM PANEL PRICING
1 ¾"
1¾”
16" Coverage
WEATHER SNAP-16TM
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
KYNAR 500® COLORS
GALVALUME PLUS®
24
146
CLEAR ACRYLIC
GALVALUME PLUS®
24
146
PRICE PER
SQUARE
PRICE PER
LFT.
MINIMUM
ORDER
Consult the Weather Snap-16™ Technical/Erection Manual for proper product application, design details, and additional product information.
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.65 for panels 3” to 2’-9” or $1.85 for panels 2’-10” to 3’-11”.
3. All prices include standard packaging.
4. Light striations in the panels are standard. Panels will be striated unless specifically stated otherwise.
5. Non-striated panel set-up charge is $150.00.
6. Panels are NOT punched or swaged.
7. All panels have factory applied mastic in the side lap.
8. For panels without mastic in the sidelap deduct $4.75 per square.
9. Prices do not include required clips, fasteners or other attaching hardware.
10. Clear acrylic-coated GALVALUME® is GALVALUME® coated with a thin acrylic film intended to increase its resistance to fingerprinting and handling marks
and eliminate the use of oil in the forming process. It is not a warranted film and may discolor while weathering.
11. For factory applied UL Labels (UL 2218 Impact, UL Class A Fire, and UL Class 90 Uplift Resistance) Labels add $1.00 per panel.
PACKAGE PRICING:
1. 18 panels per bundle, with a maximum of 3000# per bundle.
2. Standard packaging includes blocking and banding with protective strippable film on the female side of the panel.
3. LTL shipments require plywood crating.
4. Plywood crating...................................................$8.75 per square, $107.50 minimum
5. Please consult your salesperson for special packaging prices.
NOTES:
1. Oil-canning is not a cause for rejection - no exceptions.
2. Panel pricing reflects colors available on the current Standing Seam/Architectural Panel Color Selection Chart. For gauges not listed or special colors,
please inquire.
3. For panel lengths exceeding 45’-0”, please inquire.
4. For gauges not listed and/or special colors, please inquire.
5. Strippable film must be removed within 7 days of arrival to prevent permanent adhesion. See General Information on page __ for sample strippable film
label.
®
SSAR-8
SS PANEL SQUARE FOOTAGE CHART
•WEATHER SNAP-16 (16” COVERAGE)
NUMBER OF SQUARE FEET PER PANEL
SSAR-9
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
45’
1.33
2.67
4.00
5.33
6.67
8.00
9.33
10.67
12.00
13.33
14.67
16.00
17.33
18.67
20.00
21.33
22.67
24.00
25.33
26.67
28.00
29.33
30.67
32.00
33.33
34.67
36.00
37.33
38.67
40.00
41.33
42.67
44.00
45.33
46.67
48.00
49.33
50.67
52.00
53.33
54.67
56.00
57.33
58.67
60.00
1.44
2.78
4.11
5.44
6.78
8.11
9.44
10.78
12.11
13.44
14.78
16.11
17.44
18.78
20.11
21.44
22.78
24.11
25.44
26.78
28.11
29.44
30.78
32.11
33.44
34.78
36.11
37.44
38.78
40.11
41.44
42.78
44.11
45.44
46.78
48.11
49.44
50.78
52.11
53.44
54.78
56.11
57.44
58.78
60.11
1.56
2.89
4.22
5.56
6.89
8.22
9.56
10.89
12.22
13.56
14.89
16.22
17.56
18.89
20.22
21.56
22.89
24.22
25.56
26.89
28.22
29.56
30.89
32.22
33.56
34.89
36.22
37.56
38.89
40.22
41.56
42.89
44.22
45.56
46.89
48.22
49.56
50.89
52.22
53.56
54.89
56.22
57.55
58.89
60.22
1.67
3.00
4.33
5.67
7.00
8.33
9.67
11.00
12.33
13.67
15.00
16.33
17.67
19.00
20.33
21.67
23.00
24.33
25.67
27.00
28.33
29.67
31.00
32.33
33.67
35.00
36.33
37.67
39.00
40.33
41.67
43.00
44.33
45.67
47.00
48.33
49.67
51.00
52.33
53.67
55.00
56.33
57.67
59.00
60.33
1.78
3.11
4.44
5.78
7.11
8.44
9.78
11.11
12.44
13.78
15.11
16.44
17.78
19.11
20.44
21.78
23.11
24.44
25.78
27.11
28.44
29.78
31.11
32.44
33.78
35.11
36.44
37.78
39.11
40.44
41.78
43.11
44.44
45.78
47.11
48.44
49.78
51.11
52.44
53.78
55.11
56.44
57.78
59.11
60.44
1.89
3.22
4.56
5.89
7.22
8.56
9.89
11.22
12.56
13.89
15.22
16.56
17.89
19.22
20.56
21.89
23.22
24.56
25.89
27.22
28.56
29.89
31.22
32.56
33.89
35.22
36.56
37.89
39.22
40.56
41.89
43.22
44.56
45.89
47.22
48.56
49.89
51.22
52.56
53.89
55.22
56.55
57.89
59.22
60.55
2.00
3.33
4.67
6.00
7.33
8.67
10.00
11.33
12.67
14.00
15.33
16.67
18.00
19.33
20.67
22.00
23.33
24.67
26.00
27.33
28.67
30.00
31.33
32.67
34.00
35.33
36.67
38.00
39.33
40.67
42.00
43.33
44.67
46.00
47.33
48.67
50.00
51.33
52.67
54.00
55.33
56.67
58.00
59.33
60.67
2.11
3.44
4.78
6.11
7.44
8.78
10.11
11.44
12.78
14.11
15.44
16.78
18.11
19.44
20.78
22.11
23.44
24.78
26.11
27.44
28.78
30.11
31.44
32.78
34.11
35.44
36.78
38.11
39.44
40.78
42.11
43.44
44.78
46.11
47.44
48.78
50.11
51.44
52.78
54.11
55.44
56.78
58.11
59.44
60.78
2.22
3.56
4.89
6.22
7.56
8.89
10.22
11.56
12.89
14.22
15.56
16.89
18.22
19.56
20.89
22.22
23.56
24.89
26.22
27.56
28.89
30.22
31.56
32.89
34.22
35.56
36.89
38.22
39.56
40.89
42.22
43.56
44.89
46.22
47.56
48.89
50.22
51.56
52.89
54.22
55.55
56.89
58.22
59.55
60.89
2.33
3.67
5.00
6.33
7.67
9.00
10.33
11.67
13.00
14.33
15.67
17.00
18.33
19.67
21.00
22.33
23.67
25.00
26.33
27.67
29.00
30.33
31.67
33.00
34.33
35.67
37.00
38.33
39.67
41.00
42.33
43.67
45.00
46.33
47.67
49.00
50.33
51.67
53.00
54.33
55.67
57.00
58.33
59.67
61.00
2.44
3.78
5.11
6.44
7.78
9.11
10.44
11.78
13.11
14.44
15.78
17.11
18.44
19.78
21.11
22.44
23.78
25.11
26.44
27.78
29.11
30.44
31.78
33.11
34.44
35.78
37.11
38.44
39.78
41.11
42.44
43.78
45.11
46.44
47.78
49.11
50.44
51.78
53.11
54.44
55.78
57.11
58.44
59.78
61.11
2.56
3.89
5.22
6.56
7.89
9.22
10.56
11.89
13.22
14.56
15.89
17.22
18.56
19.89
21.22
22.56
23.89
25.22
26.55
27.89
29.22
30.55
31.89
33.22
34.55
35.89
37.22
38.55
39.89
41.22
42.55
43.89
45.22
46.55
47.89
49.22
50.55
51.89
53.22
54.55
55.89
57.22
58.55
59.89
61.22
ARCHITECTURAL PANEL PRICING
11” Coverage
11” Coverage
4”
3½”
1”
1”
3½”
ACCENT-11
ACCENT-11R
FINISH
BASE METAL
GAUGE
MINIMUM
THICKNESS
WEIGHT PER
SQUARE
KYNAR Polar White
GALVALUME®
24
.023”
118
KYNAR 500 Colors
GALVALUME
®
24
.023”
118
WHITE
GALVANIZED
24
.023”
103
®
PRICE PER SQUARE
PRICE PER LFT.
MINIMUM
ORDER
50 SQUARES
** Perforated only - see Panel Pricing Note 3 below.
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.65 for panels 3” to 2’-9” or $1.85 for panels 2’-10” to 3’-11”.
3. Perforated panels (13% open, 1/8” round holes on .324” staggered centers) are available in POL Polar White only.
4. All prices include standard packaging.
PACKAGE PRICING:
1. Standard packaging (cardboard box with protective strippable film on each panel face).
2. Panels over 20’ long require plywood crating.
3. Panels shipped LTL require plywood crating.
4. Plywood crating: Add $8.75 per square, minimum $107.50 per crate for plywood crating.
5. Please consult your salesperson for special packaging prices.
NOTES:
1. Maximum panel length is 40’-0”.
2. Panel pricing reflects colors available on the current Standing Seam/Architectural Panel Color Selection Chart. For gauges not listed or special colors,
please inquire.
3. Oil-canning is not a cause for rejection - no exceptions.
4. Accent panel is not recommended for exterior wall applications.
SSAR-10
ARCHITECTURAL PANEL PRICING
18” Coverage
5½”
6¼”
3”
1½”
6¼”
SHADOW WALL-18TM
FINISH
BASE METAL
GAUGE
MINIMUM
THICKNESS
WEIGHT PER
SQUARE
KYNAR 500® Colors
GALVALUME PLUS®
24
.023”
168
Clear Acrylic
GALVALUME PLUS®
24
.023”
168
PRICE PER SQUARE
PRICE PER LFT.
MINIMUM
ORDER
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.50 for panels 3” to 2’-9” or $1.85 for panels 2’-10” to 3’-11”.
3. Prices do not include standard packaging.
4. Clear acrylic-coated GALVALUME® is GALVALUME® coated with a thin acrylic film intended to increase its
resistance to fingerprinting and handling marks and eliminate the use of oil in the forming process. It is not a
warranted film and may discolor while weathering.
PACKAGE PRICING:
1. 18 panels per bundle, with a maximum of 3000# per bundle.
2. Block and band with protective interleaf ........................................................ $1.30/lf of bundle, $27.50 minimum
3. Block and band with waterproof paper wrap and protective interleaf ...... $1.90/lf of bundle, $27.50 minimum
4. LTL Packaging - Plywood crating with protective interleaf.......................... $8.75 per square, $107.50 minimum
5. Special packaging requirements ...................................................................... Please inquire
NOTES:
1. Please inquire for panel lengths over 40’-0”.
2. Panel pricing reflects colors available on the current Standing Seam/Architectural Panel Color Selection Chart. For gauges not listed or special colors,
please inquire.
3. Oil-canning is not a cause for rejection - no exceptions.
SSAR-11
STANDING SEAM TRIM PRICING
SHADOW GUTTER
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GU52_4^
Super Seam
20’-3”
24
20½”
1.7#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GU-52_
#OLOR

6ARIES
 

b
Specify roof slope when ordering.
SHADOW GUTTER
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GU62_4
WL-16
20’-3”
24
20½”
1.7#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50SF4^
Super Seam
& WL-16
20’-3”
24
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GU-62_
#OLOR

6ARIES
 

Specify roof slope when ordering.
GUTTER - SNOW
OR OVERSIZE
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
6ARIES
SF-
#OLOR
SF_
VARIES VARIES
6ARIES
Contact your salesperson for required gutter size if severe icing conditions are expected or if the standard gutter is inadequate.
GUTTER SUPPORT STRAP
GS-501
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
1’-4”
24
2¼
0.2#
GIRTH
WEIGHT
PER EA
PRICE PER EACH
GALVALUME PLUS®
KYNAR® COLOR
Ð
Ð
50GS5014^
Super Seam
& WL-16
Ð
Use with 520 & 620 Series Shadow Gutters. Match roof Color.
GUTTER END CAP
EC52_
EC62_
SF_
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
50EC52_4LS
Super Seam
N/A
24
0.4#
50EC62_4^
WL-16
N/A
24
0.5#
50SFP4_4^
All Roofs
N/A
24
0.5#
PRICE PER EA
GALVALUME PLUS®
SMP COLOR
SF- end cap will be made to fit snow or oversize gutter. Specify roof slope when ordering.
SSAR-12
STANDING SEAM TRIM PRICING
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GC10_4^
AS REQ’D
10’-3”
24
57⁄8”
0.5#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-10
b

#OLOR
Use as required. Specify roof slope when ordering.
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GC20_4^
AS REQ’D
10’-3”
26
14¼”
1.2#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-20
#OLOR

Use as required. Specify roof slope when ordering.
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GC50_4^
Super Seam
10’-3”
24
57⁄8”
0.5
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-50
b
#OLOR
Use as required. Specify roof slope when ordering.
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50GC60_4^
WL-16
10’-3”
24
83⁄8
0.7#
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
10’-3”
24
83⁄8”
0.7#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-60
b
#OLOR
Use as required. Specify roof slope when ordering.
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
50GC62_4^
Super Seam
& WL-16
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-62_
b
#OLOR
Ð
Use with low eave plate and standard wall panels. Specify roof slope when ordering.
SSAR-13
STANDING SEAM TRIM PRICING
GUTTER COUNTER FLASHING
ITEM
NUMBER
PANEL
50GC63_4^
Super Seam
&WL-16
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
10’-3”
24
10¼”
0.8#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
GC-63_
#OLOR
Use with low eave plate and Shadow Wall-18 wall panels. Specify roof slope when ordering.
DOWNSPOUT & STRAP
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
AS REQ’D
20’-3”
24
1613⁄16”
1.4
N/A
24
83⁄8”
0.1#
PRICE PER FOOT
GALVALUME PLUS®SMP COLOR
DS-101
D.S. Length
4
50DS1014^
4
50DS1014^N
Specify downspout with or without kickout
21⁄8
DS-105
Color
50DS1054^
41⁄8
AS REQ’D
DS-105
Use with DS-101 and all wall panels.
LOW SIDE SHADOW EAVE TRIM
ET-50_
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ET50_4^
Super Seam
20’-3”
24
9¼”
.8
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR


#OLOR
Specify roof slope when ordering.
LOW SIDE SHADOW EAVE TRIM
ET-60_
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ET60_4^
WL-16
20’-3”
24
14¼”
1.2
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ET62_4^
ALL ROOF
SYSTEMS
20’-3”
24
87⁄8”
.7#
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
b

 
#OLOR
Specify roof slope when ordering.
LOW SIDE EAVE TRIM CONCEALED
CLIP
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
#OLOR
ET-62_
ITEM
NUMBER
/PENHEM
Use with Cleat SS-609. Specify roof slope when ordering.
SSAR-14
STANDING SEAM TRIM PRICING
ITEM
NUMBER
FLOATING CLEAT
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
10’-3”
24
3”
2.5#
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
20’-3”
24
13¾”
1.1#
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
SUPER SEAM
& WL-16
20’-3”
24
1613⁄16”
1.4#
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
20’-3”
24
20½”
1.7#
PANEL
PRICE PER EACH
GALVALUME PLUS®
KYNAR® COLOR
SS-609
—
50SS6094M103
SIMPLE EAVE TRIM
ALL ROOF
SYSTEMS
ITEM
NUMBER
PANEL
N/A
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
ET-90_
Ð
#OLOR
50ET90_4
SUPER SEAM
& WL-16
Specify roof slope when ordering.
HIGH SIDE SHADOW EAVE TRIM
ITEM
NUMBER
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
ET-65_
b
#OLOR
 
50ET65_4


Specify roof slope when ordering.
HIGH SIDE SHADOW EAVE TRIM
CONCEALED CLIP
ET-66_
b
PANEL
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
#OLOR

 
50ET66_4
SUPER SEAM
& WL-16

/PENHEM
Ð
¾
ITEM
NUMBER
Use with Cleat SS-609. Specify roof slope when ordering.
ZERO CLEARANCE
STARTER ZEE
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6012M153
WL-16
15’-3”
22
313⁄16”
5.8#
PRICE PER EACH
GALVALUME PLUS®
SS-601
b
Use with zero clearance fixed utility clip.
SSAR-15
STANDING SEAM TRIM PRICING
LOW STARTER ZEE
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6022M153
WL-16
15’-3”
22
43⁄16”
6.4#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6032M153
WL-16
15’-3”
22
53⁄16”
7.9#
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
Super Seam
20’-3”
26
20½”
1.7#
PRICE PER EACH
GALVALUME PLUS®
SS-602
b
b
Use with low clip.
HIGH STARTER ZEE
SS-603
PRICE PER EACH
GALVALUME PLUS®
b
b
Use with high clip.
SHADOW RAKE TRIM
ITEM
NUMBER
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
b
RT-505
  
#OLOR
50RT5054^

Use with fixed or moveable clips. Requires Closure SS-506.
SHADOW RAKE TRIM
RT-605
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT6054^
WL-16
20’-3”
24
20½”
1.7#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT5064^
Super Seam
15’-3”
24
6½”
8.1
PRICE PER FOOT
GALVALUME PLUS®
SMP COLOR
b
  
#OLOR

Requires Closure SS-606.
SHADOW RAKE TRIM
SS-506
Ð
Ð
#OLOR
Match roof color.
SSAR-16
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
STANDING SEAM TRIM PRICING
SHADOW RAKE TRIM
RT-507
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT5074^
AS REQ’D
20’-3”
24
18½”
1.5#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT6014^
AS REQ’D
20’-3”
24
15¾”
1.3#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50RT6024^
AS REQ’D
20’-3”
24
181⁄8”
1.5#
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6064^
WL-16
15’-3”
24
5½”
6.9#
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SRECR4^
N/A
N/A
24
N/A
0.2#
50SRECL4^
N/A
N/A
24
N/A
0.2#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR

  
#OLOR

SHADOW RAKE TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
RT-601
  
#OLOR

SHADOW RAKE TRIM
CONCEALED CLIP
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
RT-602
  
#OLOR
/PEN(EM
SHADOW RAKE TRIM CLOSURE
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
SS-606
Ð
¾
Ð
¾
#OLOR
Match roof color.
SHADOW RAKE END CAP
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
SRECR (RIGHT)
SRECL (LEFT)
b
b
Use with Shadow Series rake trim.
SSAR-17
STANDING SEAM TRIM PRICING
SHADOW RAKE TRIM END CAP
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50RT5084^
Super Seam
0’-9”
24
83⁄8”
0.5#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
RT-508
b
#OLOR
Required at rake trim termination.
SHADOW RAKE TRIM END CAP
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50RT6084
WL-16
0’-9”
24
57⁄8”
0.4#
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
15’-3”
22
4”
6.1#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
RT-608
b
#OLOR
Required at rake trim termination.
BACKING TRIM
ITEM
NUMBER
PANEL
PRICE EACH
GALVALUME PLUS®
KYN COLOR
RT-609
50RT609M
Super Seam
& WL-16
Use with Shadow Series Trim.
SHADOW GUTTER CORNER BOX
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SCB4^
ALL
N/A
24
N/A
0.9#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SSPB_L4^
Super Seam
N/A
24
N/A
2.8#
PRICE PER EACH
GALVALUME PLUSZSMP COLOR
SBC
Use with Shadow Series Trim.
SHADOW TRIM PEAK BOX
SSPB_
Specify roof slope when ordering.
SSAR-18
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
STANDING SEAM TRIM PRICING
RAKE TRANSITION TRIM
TT-521
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50TT5214^
Super Seam
& wl-16
20’-3”
26
10¼”
0.8#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
b
b
#OLOR
Use with fixed or movable clips. Required Closure SS-506. Use with Super Seam or SS-606 with WL-16.
ALTERNATE COUNTERFLASHING
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50MT6014^103
AS REQ’D
10’-3”
24
55⁄8”
4.6#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
10’-3”
24
20½”
17.2#
24
N/A
0.1#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
MT-601
b
b
#OLOR
RIDGE CAP
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
RC-51_
RC-600 END CAP
50RC51_4^103
Ð
Super Seam
& WL-16
#OLOR
Specify roof slope when ordering. Maximum roof slope is 5:12.
50RC6004^
Super Seam
& WL-16
N/A
Maximum roof slope is 5:12. Match roof color. Use with fixed or movable clips. Requires end cap at each end of run.
ITEM
NUMBER
HIP FLASHING
RC-61
RC61EC END CAP
50RC61_4^103
b
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
Super Seam
& WL-16
10’-3”
24
16½”
13.8#
N/A
24
N/A
0.1#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
b
Specify roof slope when ordering.
#OLOR

—
50RC61EC4^
Super Seam
& WL-16
Match roof color. Requires end cap at each end of run.
HIP FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50HF5204^
AS REQ’D
20’-3”
24
14¼”
1.1#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
HF-520
#OLOR
b
3PECIFY
"EVEL
SSAR-19
STANDING SEAM TRIM PRICING
HIP FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50HF6204^
AS REQ’D
20’-3”
24
14¼”
1.1#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF1204^
WS-16
20’-3”
24
20½”
1.6#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
HF-620
#OLOR
b
"EVEL
VALLEY FLASHING
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
VF-120
#OLOR
3PECIFYANGLE
Ð
Ð
Match roof color. Bevel angle must be specified in degrees (See page SSAR28).
VALLEY FLASHING
LOW SYSTEM
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF5204^
Super Seam
20’-3”
24
25¾”
2.1#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
VF-520
#OLOR
3PECIFY
ANGLE
b
"EVEL
b
Match roof color. Bevel angle must be specified in degrees (see page SSAR-28).
VALLEY FLASHING
HIGH SYSTEM
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF5214^
Super Seam
20’-3”
24
25¾”
2.1#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
VF-521
3PECIFY
ANGLE
b
#OLOR
"EVEL

Match roof color. Bevel angle must be specified in degrees (see page SSAR-28).
VALLEY FLASHING
LOW SYSTEM
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF6204^
WL-16
20’-3”
24
24¾”
2.0#
VF-620
3PECIFY
ANGLE
#OLOR
b
"EVEL
Match roof color. Bevel angle must be specified in degrees (see page SSAR-28).
SSAR-20
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
STANDING SEAM TRIM PRICING
VALLEY FLASHING
HIGH SYSTEM
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF6214^
WL-16
20’-3”
24
24¾”
2.0#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
VF-621
3PECIFY
ANGLE

#OLOR
"EVEL
b
Match roof color. Bevel angle must be specified in degrees (see page SSAR-28).
EXTENDED VALLEY FLASHING
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50VF6224^
WS-16
20’-3”
24
42¾”
3.5#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
VF-622
#OLOR
3PECIFYANGLE
b
b
Use with valleys over 30’-0.” Match roof color. Bevel angle must be specified in degrees (see page SSAR-28).
RIB COVER
ITEM
NUMBER
PANEL
LENGTH
GAUGE
WEIGHT
PER EA
50RC6514^
WL-16
0’-8”
24
0.25#
50RC6524^
WL-16
0’-8”
24
0.25#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
RC-651
(OUTSIDE)
RC-651
(outside)
RC-652
(INSIDE)
RC-652
(inside)
Match roof color. Both parts are required for each rib. Allow 10 days lead time for delivery.
RIB COVER
ITEM
NUMBER
PANEL
LENGTH
GAUGE
WEIGHT
PER EA
50RC6504^
WS-16
0’-8”
24
0.25#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
RC-650
Match roof color.
SSAR-21
STANDING SEAM TRIM PRICING
SUPER SEAM-PLUS REPAIR CAP
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
44SSPRCM
44SSPRCW
44SSPRCSC-SO
SS-Plus
10’-3”
N/A
N/A
4.3#
PRICE PER EACH
MILL FINISH
WH POLYESTER
SSPRC
Repair caps are made from 0.060” extruded aluminium. Available in Mill Finish and Polar White.
Check with your salesperson for special color requirements. Allow 15 days lead time for delivery.
Aluminum
“Z” CLOSURE
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6074^103
WS-16
10’-3”
24
3¾”
3.1#
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50SS6084M103
WS-16
10’-3”
24
3½”
2.9#
ITEM
NUMBER
PANEL
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50TT6224^103
WS-16
10’-3”
24
2½”
2.1#
ITEM
NUMBER
PANEL
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50TT6234^
WS-16
20’-3”
24
87⁄8”
0.7#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
SS-607
#OLOR
Field cut as required.
OFFSET CLEAT
PRICE PER EACH
GALVALUME PLUS®
SS-608
PARAPET RAKE CLEAT
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
TT-622
#OLOR
PARAPET FLASHING
TT-623
#OLOR

SSAR-22
/PEN
HEM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ARCHITECTURAL TRIM PRICING
SPACER TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ST8014^
10’-3”
24
215⁄16”
0.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ST8024^
10’-3”
24
3”
0.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50JT8014^
20’-3”
24
4”
0.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT8514^
20’-3”
24
71⁄8”
0.6#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT8524^
20’-3”
24
61⁄8”
0.5#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ST-801
b
#OLOR
Accent-11
SPLICE TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ST-802
#OLOR
Accent-11
JAMB TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
JT-801
#OLOR
Accent-11
CAP TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
MT-851
b
#OLOR
Accent-11
TRANSITION TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
b
MT-852
#OLOR
Accent-11
SSAR-23
ARCHITECTURAL TRIM PRICING
SOFFIT TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WEIGHT
PER EA
50CF1164^103
10’-3”
24
47⁄8”
4.1#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ST9014^
10’-3”
24
33⁄16”
0.3#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ST9024^
10’-3”
24
47⁄8”
0.4#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50HT9014^
20’-3”
24
10¼”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50CT9014^
20’-3”
24
11”
0.9#
PRICE PER EACH
GALVALUME PLUS®
KYN COLOR
CF-116
b
b

#OLOR
Accent-11
SW-18 SPACER TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ST-901
b
b
b
#OLOR
Shadow Wall-18
SW-18 SPACER TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ST-902
b
b
#OLOR
Shadow Wall-18
SW-18 HEAD TRIM
HT-901
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR

Ð
#OLOR
Shadow Wall-18
SW-18 OUTSIDE CORNER TRIM
CT-901
#OLOR
Shadow Wall-18
SSAR-24
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ARCHITECTURAL TRIM PRICING
SW-18 INSIDE CORNER TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50ICT9014^
20’-3”
24
11”
0.9#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50BT9014^
10’-3”
24
10¼”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50BT9024^
10’-3”
24
14¼”
1.2#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9014^
20’-3”
24
10¼”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9024^
20’-3”
24
9¼”
0.7#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ICT-901
#OLOR
Shadow Wall-18
SW-18 BASE TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
BT-901
b
#OLOR
Shadow Wall-18
SW-18 BASE TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
BT-902
b
#OLOR
Shadow Wall-18
SW-18 CAP TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
MT-901
b
b
#OLOR
Shadow Wall-18
SW-18 SILL TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
MT-902
#OLOR

Shadow Wall-18
SSAR-25
ARCHITECTURAL TRIM PRICING
SW-18 COVER TRIM
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9034^
20’-3”
24
10½”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9044^
20’-3”
24
10¼”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9054^
20’-3”
24
10¼”
0.8#
ITEM
NUMBER
MAXIMUM
LENGTH
GAUGE
GIRTH
WEIGHT
PER LF
50MT9064^
10’-3”
24
14¼”
1.2#
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR

MT-903
#OLOR

Shadow Wall-18
SW-18 SPLICE TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
MT-904

#OLOR
Shadow Wall-18
SW-18 MASONRY TRIM
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
MT-905
b
b
#OLOR
Shadow Wall-18
SW-18 MASONRY TRIM
MT-906

b
#OLOR
b
Shadow Wall-18
SSAR-26
PRICE PER FOOT
GALVALUME PLUS®
KYN COLOR
ARCHITECTURAL TRIM PRICING
FLAT TRIM SHEETS
(ASTM A792, GRADE 50 MATERIAL)
&LAT3HEET3KID5PTOg^
,4,3KID
&OR0ROTECTIVE-ASKING&ILM
!DDPER3HEET
ITEM
NUMBER
LENGTH
GAUGE
WIDTH
WEIGHT
PER EA.
Acrylic-Coated
Galvalume®
10’-0”
26
413⁄8”
25.7#
Poly Polar White
10’-0”
26
413⁄8”
26.3#
SMP Colors
10’-0”
26
413⁄8”
26.4#
KYNAR Colors
10’-0”
26
413⁄8”
26.4#
Acrylic-Coated
Galvalume®
10’-0”
24
42¾”
34.0#
KYNAR Colors
10’-0”
24
42¾”
35.0#
Acrylic-Coated
Galvalume®
10’-0”
22
42¾”
44.0#
Acrylic-Coated
Galvalume®
10’-0”
22
48”
49.0#
Poly Polar White
10’-0”
22
42¾”
44.3#
FINISH
1-10
PRICE PER EACH
11-50
51+
TRIM PACKAGE PRICING:
1. Prices do not include standard packaging.
2. Standard Kraft paper wrap: $0.52 per lineal foot ($5.20 minimum)
3. Heavy cardboard box with angles: $25.00.
4. LTL - heavy cardboard box with wood blocks and metal bands: $4.50 per lineal foot ($45.00 minimum)
5. Special packaging: Please inquire
NOTES:
1. 26 gauge trim is available in all finishes shown on the current Components Commercial/Industrial Color Selection
Chart. For special colors, please inquire.
2. 24 gauge trim is available in all finishes shown on the current Standing Seam/Architectural Panel Color Selection
Chart. For special colors, please inquire.
3. Not all coil sizes and/or finishes are stocked at all locations. Please check with your sales person for availability and lead times.
SSAR-27
ARCHITECTURAL TRIM PRICING
SPECIAL TRIM PRICING
The following formula is used to calculate the Price per Foot of special trim:
Girth of Material x Price per Inch of Girth + Price per Number of Breaks
Price per Inch of Girth:
29 gauge (all standard colors/finishes) ~
26 gauge (all standard colors/finishes) ~
24 gauge (all standard colors/finishes) ~
22 gauge (Polar White or Galvalume Plus® only) ~
Price per Break (hem equals two breaks): $0.10
1.
2.
3.
4.
5.
6.
7.
8.
All trim to be 26 gauge material unless noted otherwise.
Prices do not include standard packaging. Add appropriate packaging charges.
All short lengths will be charged as a 5’-0” minimum length.
A $15.00 set-up charge will be added for tapered trim - No Exceptions.
Customer sketch of special trim must be in Whirlwind’s possession before order can be processed.
Specify which side of trim has the finish color.
If more than one special trim is required number them SF1, SF2, SF3, etc.
Special parts such as peak boxes, corner boxes, etc. will be $47.50 per part.
(IP
6ALLEY
2IDGE
'UTTER
4RANSITION
)NSIDE
Roof Slope
1:12
2:12
3:12
4:12
5:12
6:12
7:12
8:12
9:12
10:12
11:12
12:12
Hip
173°
166°
160°
154°
148°
143°
138°
133°
129°
126°
123°
120°
Valley
117°
113°
110°
107°
104°
102°
99°
97°
95°
93°
92°
90°
Ridge
170°
161°
152°
143°
135°
127°
120°
113°
106°
100°
95°
90°
Gutter and Transition
94°
99°
104°
108°
112°
116°
120°
123°
126°
129°
132°
135°
Inside
86°
81°
76°
72°
68°
64°
60°
57°
54°
51°
48°
45°
1. This angle chart assumes the roof slopes are the same on both sides of the hip, valley, or ridge line.
2. Contact your salesperson if the roof slopes are different.
SSAR-28
STANDING SEAM ACCESSORY PRICING
HIGH MOVABLE CLIP
ITEM
NUMBER
PANEL
HEIGHT
WEIGHT
PER EA.
44SS2HMC
Super Seam-II
43⁄8”
0.47#
44SSPHMC
Super Seam-Plus
43⁄8”
0.53#
44WLHMC
Weather Lok-16
33⁄8”
0.29#
PRICE EACH
1 - 600
601 - 2500
OVER 2500
HW-2120
Super Seam-II
Super Seam-Plus
HW-3160
Weather Lok-16
MC-1213
(Architectural clip-2:12 and Above or Painted.)
LOW MOVABLE CLIP
ITEM
NUMBER
PANEL
HEIGHT
WEIGHT
PER EA.
44SS2LMC
Super Seam-II
33⁄8”
0.39#
44SSPLMC
Super Seam-Plus
33⁄8”
0.48#
44WLLMC
Weather Lok-16
23⁄8”
0.25#
PRICE EACH
1 - 600
601 - 2500
OVER 2500
HW-2100
Super Seam-II
Super Seam-Plus
HW-3100
Weather Lok-16
MC-1203
(Architectural clip-2:12 and Above or Painted.)
UTILITY CLIP
ITEM
NUMBER
PANEL
HEIGHT
WEIGHT
PER EA.
44SS2ZERO
Super Seam-II
3”
0.12#
44WLZFC
Weather Lok-16
2”
0.13#
44WSSCUL
Weather Snap-16
17⁄8”
0.16#
PRICE EACH
1 - 600
601 - 2500
OVER 2500
HW-208
3UPER3EAM))
7EATHER,OK
FC-10200
7EATHER3NAP
WSSCUL
SSAR-29
STANDING SEAM ACCESSORY PRICING
THERMAL SPACER
SSTS
SSTS58
SSTS38
3UPER3EAM))
3UPER3EAM0LUS
WLTS
WLTS58
ITEM
NUMBER
WIDTH
THICK
LENGTH
WEIGHT
PER 100
44SSTS
Super Seam
3”
1”
237⁄8”
5.8#
44SSTS58
Super Seam
3”
5 ”
8
⁄
237⁄8”
3.6#
44SSTS38
Super Seam
3”
3 ”
8
⁄
237⁄8”
2.2#
Weather
Lok-16
7”
1”
44”
28.0#
7”
5 ”\
8
44”
17.5#
44WLTS
7EATHER,OK
PANEL
44WLTS58
Weather
Lok-16
⁄
PRICE EACH
1 - 300
301-600
OVER 600
12 oz. can of spray adhesive (44SSSA) for securing approximately 200 SSTS type thermal spacers to insulation, $9.96 each.
All thermal spacers are made from extruded closed-cell polystyrene foam with continuous skin on front and back panels.
HIGH EAVE PLATE
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44SSEP501P
Super Seam
& WL-16
14
10’-0”
Red-Oxide
8.9#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44SSEP502P
Super Seam
& WL-16
14
10’-0”
Red-Oxide
8.9#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
EP-501
b
b
Ð
Use with high clips.
LOW EAVE PLATE
PRICE PER EACH
1 - 49
50 - 200
OVER 200
EP-502
b

Optional - use with low clips.
HIGH RAKE PLATE
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44SS2RSHP
Super Seam
14
20’-0”
Red-Oxide
31.0#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44SS2RSLP
Super Seam
14
20’-0”
Red-Oxide
31.0#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
SS2RSHP
b
Use with high clips.
LOW RAKE PLATE
PRICE PER EACH
1 - 49
50 - 200
OVER 200
SS2RSLP
b
Use with low clips.
SSAR-30
STANDING SEAM ACCESSORY PRICING
UTILITY RAKE PLATE
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44WSRSP
WS-16
14
20’-0”
Red-Oxide
21.6#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44SS2BUP
Super Seam
16
24”
Red-Oxide
3.2#
44SS2BUP18
Super Seam
16
18”
Red-Oxide
2.5#
44SSBUP12
Super Seam
16
12”
Red-Oxide
1.8#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
WSRSP

Use with utility clips.
BACK-UP PLATE
SS2BUP
SS2BUP18
SS2BUP12
PRICE PER EACH
1 - 49
50 - 200
OVER 200
Use with Super Seam-II and Super Seam-Plus, all clips.
BACK-UP PLATE
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44WSBUPP
WS-16
16
15½”
Red-Oxide
2.2#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44WLBUPHP
WL-16
16
4’-0”
Red-Oxide
4.4#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
44WLBUPLL
WL-16
16
4’-0”
Red-Oxide
4.1#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
WSBUP
Cross Section
1”
Use at ridge and end laps.
HIGH BACK-UP PLATE
PRICE PER EACH
1 - 49
50 - 200
OVER 200
WLBUPH
b
Use with high clips.
LOW BACK-UP PLATE
PRICE PER EACH
1 - 49
50 - 200
OVER 200
WLBUPL
b
Use with low clips.
SSAR-31
STANDING SEAM ACCESSORY PRICING
HIGH END CLIP
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
59AK515P
WL-16
12
0’-6”
Red-Oxide
1.0#
WL-16
12
0’-6”
Galvanized
1.0#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
59AK516P
WL-16
12
0’-6”
Red-Oxide
0.6#
59AK516G
WL-16
12
0’-6”
Galvanized
0.6#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10214P
WL-16
14
15’-3”
Red-Oxide
72.7#
52PM10214G
WL-16
14
15’-3”
Galvanized
74.9#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10314P
WL-16
14
15’-3”
Red-Oxide
72.7#
52PM10314G
WL-16
14
15’-3”
Galvanized
74.9#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
AK515
59AL515G
b
Use with high clips.
LOW END CLIP
PRICE PER EACH
1 - 49
50 - 200
OVER 200
AK516
b
Use with low clips.
VALLEY PLATE (LOW)
PRICE PER EACH
1 - 49
50 - 200
OVER 200
PM102
b
3PECIFY
"EVEL
b
b
Use with low clips.
VALLEY PLATE (HIGH)
PRICE PER EACH
1 - 49
50 - 200
OVER 200
PM103

3PECIFY
"EVEL
Use with high clips.
SSAR-32
STANDING SEAM ACCESSORY PRICING
HIP PLATE (LOW)
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10414P
WL-16
14
15’-3”
Red-Oxide
36.2#
52PM10414G
WL-16
14
15’-3”
Galvanized
37.3#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10514P
WL-16
14
15’-3”
Red-Oxide
43.5#
52PM10514G
WL-16
14
15’-3”
Galvanized
44.8#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10814G
Super Seam
& WL-16
14
10’-0”
Galvanized
98.4#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52PM10914G
Super Seam
14
10’-0”
Galvanized
98.4#
ITEM
NUMBER
PANEL
GA
LENGTH
FINISH
WEIGHT
PER EA.
52SA100314P
Super Seam
14
10’-3”
Red-Oxide
8.4#
52SA100314G
Super Seam
14
10’-3”
Galvanized
8.4#
PRICE PER EACH
1 - 49
50 - 200
OVER 200
PM104
b
b
Use with low clips.
HIP PLATE (LOW)
PRICE PER EACH
1 - 49
50 - 200
OVER 200
PM105
b
b
Use with high clips.
HIP/VALLEY PLATE
PM108
PRICE PER EACH
1 - 49
50 - 200
OVER 200
3PECIFY
"EVEL
Use with all clips.
VALLEY PLATE (HIGH)
PRICE PER EACH
1 - 49
50 - 200
OVER 200
PM109
Õ

3PECIFY
"EVEL
Use with all clips.
BACKING ANGLE
PRICE PER EACH
1 - 49
50 - 200
OVER 200
SA1003
Use with all clips.
SSAR-33
STANDING SEAM ACCESSORY PRICING
BEARING PLATE
ITEM
NUMBER
PANEL
GAUGE
LENGTH
FINISH
WEIGHT
PER EA.
44SSBP
All
16
N/A
Red-Oxide
0.77#
PRICE PER EACH
1 - 500
501 - 1000
OVER 1000
BP-1


b
 

Use with all panel clips over rigid board installation. One bearing plate per clip.
INSIDE CLOSURE (METAL)
ITEM
NUMBER
PANEL
GA
HEIGHT
FINISH
WEIGHT
PER EA.
44SS2MCP18
Super Seam
N/A
3”
N/A
0.22#
ITEM
NUMBER
PANEL
GA
HEIGHT
FINISH
WEIGHT
PER EA.
44SS2MCPR
Super Seam
N/A
3”
N/A
0.03#
PRICE PER EACH
1 - 100
101 - 200
OVER 200
SS2MCP18
INSIDE CLOSURE (RUBBER)
PRICE PER EACH
1 - 100
101 - 200
OVER 200
SS2MCPR
For optional use in lieu of 18 gauge metal closure.
OUTSIDE CLOSURES
(END DAMS)
SS2ED
SS2ED18
SS2ED12
3UPER3EAM))
3UPER3EAM0LUS
WLED
ITEM
NUMBER
PANEL
WIDTH
GAUGE
FINISH
WEIGHT
PER EA.
44SS2ED
Super Seam
24”
24
Galvalume®
1.00#
44SS2ED^
Super Seam
24”
24
KYNAR® Colors
1.00#
44SS2ED18
Super Seam
18”
24
Galvalume®
0.85#
44SS2ED^18
Super Seam
18”
24
KYNAR® Colors
0.85#
44SS2ED12
Super Seam
12”
24
Galvalume®
0.70#
44SS2ED^12
Super Seam
12”
24
KYNAR® Colors
0.70#
44WLED
Weather
Lok-16
16”
24
Galvalume®
0.40#
44WLED^
Weather
Lok-16
16”
24
KYNAR® Colors
0.40#
7EATHER,OK
PRICE PER EACH
1-100
101-200 OVER 200
Outside closures require the use of back-up plates if used over open framing. Colors are limited. Check with you salesperson. 12” wide Super Seam closures have no
minor ribs.
SSAR-34
STANDING SEAM ACCESSORY PRICING
TUBE CAULKING
ITEM
NUMBER
DESCRIPTION
TUBE SIZE
WEIGHT
PRICE PER EACH
Schnee-Morehead 7108 Permathane
(stocked in White only)
42TCW
Case of 30 Cartridges
10.3 oz.
35.0#
42TCW
Single Cartridge
10.3 oz.
1.2#
10.3 oz.
35.0#
Schnee-Morehead5522 Acryl-R Acrylic
(stocked in Clear only)
TAPE SEALANT
RS038
RS100
RS078
RS078TRI
RS212
&LAT
42TCCLR
Case of 30 Cartridges
42TCCLR
Single Cartridge
10.3 oz.
1.2#
WXT
ROLL
LENGTH
CARTON
QUANTITY.
WEIGHT
PER CT
⁄8” X 3⁄32”
50’
24 Rolls
38.0#
1” X 3⁄32”
50’
10 Rolls
33.0#
7
⁄8” X 3⁄16”
25’
24 Rolls
15.0#
7
⁄8” X 3⁄16”
50’
12 Rolls
60.0#
Triple-Bead
2½” X 3⁄16”
20’
6 Rolls
21.0#
ITEM
NUMBER
TYPE
DIAMETER
ROLL
LENGTH
CARTON
QUANTITY
WEIGHT
PER CT
42RS012
Round
½”
10’
6 Rolls
9.0#
ITEM
NUMBER
TYPE
42RS038
Flat
3
42RS100
Flat
42RS078
Double-Bead
42RS078TRI
Tri-Bead
42RS212
PRICE PER CARTON
$OUBLE"EAD
4RI"EAD
4RIPLE"EAD
TAPE SEALANT
PRICE PER CARTON
RS012
For use with optional Weather Lok-16 ridge channel.
PRE-CUT TAPE SEALANT
ITEM
NUMBER
TYPE
WXT
PIECE
LENGTH
CARTON
QUANTITY
WEIGHT
PER CT
42RS138
Minor Rib
13⁄8” X 7⁄32”
4”
144 Pieces
10.0#
PRICE PER CARTON
RS138
For use with Super Seam-II and Super Seam-Plus only.
PRE-CUT TAPE SEALANT
ITEM
NUMBER
TYPE
WXT
PIECE
LENGTH
CARTON
QUANTITY
WEIGHT
PER CT
42RS112
Endlap
1½” X 3⁄32”
16”
90 Strips
13.0#
PRICE PER CARTON
RS112
For use with Weather Lok-16 only.
SSAR-35
STANDING SEAM ACCESSORY PRICING
UTILITY CLAMP
ITEM
NUMBER
PANEL
MATERIAL
44SS2UC
Super Seam
Aluminum
WEIGHT
PER EA
PRICE PER EACH
WEIGHT
PER EA
PRICE PER EACH
HW-562
S5!™ ULD
Use with Super Seam-II and Super Seam-Plus, all clips.
WIND CLAMP
HW-568
HW-569
S5!™ Wind Clamp
ITEM
NUMBER
PANEL
MATERIAL
44SS2WC
Super Seam-II
Aluminum
44SSPWC
Super Seam-Plus
Aluminum
Use at clip locations to provide additional panel uplift capacity. Clamp usage is to be determined by a registered professional engineer.
SPACER BAR
SB-501
ITEM
NUMBER
PANEL
LENGTH
MATERIAL
44SSSB
Super Seam-II
24”
Aluminum
WEIGHT
PER EA
PRICE PER EACH
WEIGHT
PER EA
PRICE PER EACH
Optional - used to hold 2’-0” module on panels.
SHAPING TOOL
ITEM
NUMBER
PANEL
LENGTH
MATERIAL
44SS2ST
Super Seam-II
3’-0”
Aluminum
HW-600
Enables the seam to be locked with minimal effort if a problem is encountered when snapping the seams together, such as an incorrectly
installed clip or damaged panel lip.
HAND SEAMER
ITEM
NUMBER
PANEL
FINISH
44WLTLS
Weather Lok-16
Gray
ITEM
NUMBER
PANEL
FINISH
44WSHT
Weather Snap-16
Gray
WEIGHT
PER EA
PRICE PER EACH
WEIGHT
PER EA
PRICE PER EACH
WLTLS
PANEL HEMMING TOOL
WSHT
Used to fold panel over offset cleat.
SSAR-36
STANDING SEAM ACCESSORY PRICING
PRE-VENT LOW PROFILE RIDGE VENT
VPV10
VPV08
VPVRC
VPVEC
VPVSK
IFY
3PEC TH
ENG
#AP,
2IDGE#AP
2IDGE
#AP
%ND#AP
ITEM
NUMBER
DESCRIPTION
WT./EA.
45VPV10
10’ long pre-vent base channel
(2 required for each 10’-0” run.)
6.3#
45VPV08
8’ long pre-vent base channel
5.0#
50SF4^
10’-2” long, 24 gauge ridge cap
24.7#
50SF4^
8’-2” long, 24 gauge ridge cap
19.8#
50SFP4^
End Cap, 24 gauge
#OBRA§6ENT
-ATERIAL
(2 required for each 8’-0” run.)
PRICE PER EACH
GALVALUME®
WHITE SMP COLOR
(2 required for each vent run.)
Optional Splice Kit
(Sealant and matching fasteners.)
(Contains enough material for 3 splices.)
N/A
0RE6ENT
Pre-Vent channels with Cobra® vent material.
Designed for minimal ventilation with lower profile appearance.
Must specify roof slope (up to 12:12).
Must specify ridge cap leg length.
CONTINUOUS THROAT GRAVITY
RIDGE VENTILATORS
ITEM
NUMBER
DESCRIPTION
WT./EA.
45V9A^FCP
9” Throat X 10’ long, 26 GA, with damper
207.0#
45V12A^FCP
12” Throat X 10’ long, 26 GA, with damper
223.0#
PRICE PER EACH
GALVALUME®
WHITE SMP COLOR
All ventilators have bird screen.
Pricing shown is for ventilators with flat skirts.
All ventilators will conform to roof slopes up to 6:12.
For 24 gauge vents add 45%.
For standard color other than Polar White add 45% to white price.
For hardware required for adjustable ventilators, see below.
For chain operated ventilators, please inquire.
VENTILATOR HARDWARE
ITEM
NUMBER
DESCRIPTION
45VC
Galvanized 3⁄32” Vent Cable
45VP
1½” Pulley w/ Swivel Block
45VPMA
Pulley Mounting Angle (red-oxide)
45VEB
¼” x 2” Eye Bolt w/ Nut
45VCC
Cable Clamps
45VVH
Vent Adjustment Hook
45VHW
DL-600 Hand Winch
45VWMA
PRICE PER EACH
Winch Mounting Angle (red-oxide)
SSAR-37
STANDING SEAM ACCESSORY PRICING
LIGHT TRANSMITTING
PANELS
ITEM
NUMBER
DESCRIPTION
WT. /EA.
PRICE PER EACH
Super Seam-II Insulated (UL580 Class 90)
42SLST2103MI
24” coverage x 10’-3” long, Galvalume®
38.0#
42SLST2103WI
24” coverage x 10’-3” long, Polar White
38.0#
42SLST2103I-SO
24” coverage x 10’-3” long, other colors
38.0#
Super Seam-II Non-Insulated (UL580 Class 90)
3UPER3EAM))
42SLST2103M
24” coverage x 10’-3” long, Galvalume®
32.0#
42SLST2103W
24” coverage x 10’-3” long, Polar White
32.0#
42SLST2103-SO
24” coverage x 10’-3” long, other colors
32.0#
Super Seam-Plus Insulated (UL580 Class 90)
42SLSTP103MI
24” coverage x 10’-3” long, Galvalume®
38.0#
42SLSTP103WI
24” coverage x 10’-3” long, Polar White
38.0#
42SLSTP103I-SO
24” coverage x 10’-3” long, other colors
38.0#
Super Seam-Plus Non-Insulated (UL580 Class 90)
3UPER3EAM0LUS
WARNING: These light transmitting panels are
42SLSTP103M
24” coverage x 10’-3” long, Galvalume®
not designed or intended to bear the weight
of any person walking, stepping, standing,
or resting on them.
Whirlwind Building
42SLSTP103W 24” coverage x 10’-3” long, Polar White
Components DISCLAIMS ANY WARRANTY OR
REPRESENTATION, EXPRESSED OR IMPLIED,
24” coverage x 10’-3” long, other colors
that any person can safely walk, step, stand, or 42SLSTP103-SO
rest on or near these light transmitting panels or
All panels are Reinforced/U.V. Resistant Acrylit into a metal panel.
that they comply with any OSHA regulation.
Colored panels other than Polar White or Galvalume require a longer lead time. Please inquire.
VINYL FACE INSULATION
ITEM
NUMBER
DESCRIPTION
32.0#
32.0#
32.0#
WT. /
MSF.
47INS-MDL
3” Thick
(R10)
192.0#
47INS-MDL
4” Thick
(R13)
220.0
PRICE PER MSF
Insulation is UL-25 fire rated, 0.6#/cu.ft. density, with a 4 mil. white vinyl taffeta vapor barrier with 2” vinyl tabs on each side.
Length and width of each roll must be specified. Length limits: 20’ - 125’, available widths: 3’, 4’, 5’’, 6’. Maximum 2 widths per order, please!
Rolls of 3” thick x 6’-0 wide are stocked in 52’-0 and 104’-0 lengths.
POULTRY NETTING
ITEM
NUMBER
DESCRIPTION
WT. /EA.
PRICE EACH
20 GA Galvanized x 2” Wire Mesh
INSULATION TAPES
46WM300
6’ wide x 300’ long roll
88.0#
46WM150
6’ wide x 150’ long roll
44.0#
ITEM
NUMBER
DESCRIPTION
PRICE EACH
3” Wide White Vinyl Patching Tape x 150’ roll
42TPIN
(Used for sidelaps or tears in facing.)
42TPDF
1½” Wide Double-Faced Polyester Tape x 180’ roll
(Used to secure insulation at eave or base prior to stretching tight.)
SSAR-38
STANDING SEAM ACCESSORY PRICING
PLATED FINISH SELF-DRILLING
FASTENER
¼-14 x 1” Maxiseal Teks® 2
MATCHING FINISH LONG-LIFE
SELF-DRILLING FASTENER
¼-14 x 1¼” HTZ Teks® 2
MATCHING FINISH LONG-LIFE
HWH SELF-TAPPING FASTENER
¼-14 x 1” HTZ™ AB long-life tapper with sealing
washer
MATCHING FINISH LONG-LIFE HWH
SELF-TAPPING FASTENER
17-14 x 1” HTZ™ AB long-life tapper with sealing
washer
MATCHING FINISH LONG-LIFE HWH
SELF-DRILLING FASTENER
12-14 HTZ Teks® 2 long-life driller with sealing
washer
ITEM
NUMBER
SIZE
41SD10014Z
¼”
LENGTH
1”
HEAD AF
WEIGHT
PER M
⁄16”
18.5#
HEAD AF
WEIGHT
PER M
5
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fastener #1 Used for Super Seam panel clip attachment.
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UD11414^
¼”
LENGTH
1¼”
⁄16”
28.6#
HEAD AF
WEIGHT
PER M
5
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Fastener #1E Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UT100^
¼”
LENGTH
1”
⁄16”
5
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
18.5#
Fastener #2B
Many colors are special order and could be subject to limited availability.
Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UT17100^
#17
LENGTH
1”
HEAD AF
⁄16”
5
WEIGHT
PER M
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
18.5#
Fastener #2A
Many colors are special order and could be subject to limited availability.
Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UD114^
#12
1¼”
5
41UD112^
#12
1½”
5
41UD200^
#12
2”
5
LENGTH
HEAD AF
WEIGHT
PER M
⁄16”
16.1#
⁄16”
19.2#
⁄16”
20.7#
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many length and color combinations are special order and could be subject to limited
availability. Please inquire. Fasteners sold in quantities of 250 only.
SSAR-39
STANDING SEAM ACCESSORY PRICING
MATCHING FINISH LONG-LIFE
LAP-TEK HWH FASTENER
¼-14 x 7⁄8“ HTZ Teks® 1 long-life Lap-Tek with sealing
washer
MATCHING FINISH HWH
SELF-DRILLING FASTENER
12-14 Maxiseal Teks® 2 driller with sealing washer.
MATCHING FINISH LAP-TEK HWH
FASTENER
¼-14 x 7⁄8“ Maxiseal Teks® Lap-Tek with sealing
washer
PLATED FINISH SELF-DRILLING
FASTENER,
NO SEALING WASHER
¼-14 x 1¼” HWH teks® 2
PLATED FINISH SELF-DRILLING
FASTENER W/ SHOULDER,
NO SEALING WASHER
¼-14 x 1¼” HWH Shoulder Teks® 2
ITEM
NUMBER
SIZE
41UD078^
¼”
LENGTH
7
⁄8”
HEAD AF
5
⁄16”
WEIGHT
PER M
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
18.0#
Fastener #4
Some colors may be special order and could be subject to limited availability.
Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD114^
#12
1¼”
5
⁄16”
16.1#
41SD112^
#12
1½”
5
⁄16”
19.2#
41SD200^
#12
2”
5
⁄16”
20.7#
LENGTH
HEAD AF
WEIGHT
PER M
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Many length and color combinations are special order and could be subject to limited availability. Please inquire.
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD078^
¼”
LENGTH
7
⁄8”
HEAD AF
5
⁄16”
WEIGHT
PER M
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
16.0#
Many colors are special order and could be subject to limited availability.
Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41TEK114Z
¼”
LENGTH
1¼”
HEAD AF
WEIGHT
PER M
⁄16”
14.3#
HEAD AF
WEIGHT
PER M
5
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41TEKSH114Z
¼”
LENGTH
1¼”
5
⁄16”
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
14.3#
Fasteners sold in quantities of 250 only.
SSAR-40
STANDING SEAM ACCESSORY PRICING
PLATED FINISH SELF-TAPPING
PANCAKE FASTENER
#10-12 x 1” Pancake Quadrex
PLATED FINISH SELF-DRILLING
PANCAKE FASTENER
#10-12 x 1” #2 Pancake Quadrex Teks®
COATED FINISH SELF-DRILLING STEEL
ROOFING FASTENER
SFS Intec Dekfast14™ w/ #3 Phillips truss head
MATCHING FINISH LONG-LIFE HWH
WOOD FASTENER
#10-16 Wood Ultimate™ long-life wood screw with
sealing washer
ITEM
NUMBER
SIZE
41PHT100ZTX
#10
LENGTH
HEAD AF
WEIGHT
PER M
1”
QUAD
10.0#
LENGTH
HEAD AF
WEIGHT
PER M
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41PHD100ZTX
#10
1”
QUAD
10.0#
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
LENGTH
HEAD AF
WEIGHT
PER M
41PTHD158C2
#14
15⁄8”
#3 PHILLIPS
14.0#
41PTHD278C2
#14
3”
#3 PHILLIPS
23.0#
41PTHD412C2
#14
4½”
#3 PHILLIPS
33.0#
41PTHD600C2
#14
6”
#3 PHILLIPS
43.0#
PRICE PER 1000
SENTRI COATED
Fastener has a Sentri Coated finish.
Used to attach panel clip to steel decking over rigid board insulation.
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UW100^
#10
1”
5
⁄16”
14.2#
41UW112^
#10
1½”
5
⁄16”
16.3#
41UW200^
#10
2”
5
⁄16”
18.6#
LENGTH
HEAD AF
WEIGHT
PER M
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
These fasteners will punch through 26 gauge sheet metal and fasten into wood members.
All length and color combinations are special order and could be subject to limited
availability. Please inquire. Fasteners sold in quantities of 250 only.
SSAR-41
STANDING SEAM ACCESSORY PRICING
MATCHING FINISH HWH
WOOD FASTENER
With sealing washer
PLATED FINISH THREADED
MASONRY FASTENER
ITEM
NUMBER
SIZE
41WM10100^
#10
1”
¼”
8.7#
41WMW10112^
#10
1½”
¼”
10.8#
41WM10200^
#10
2”
¼”
13.1#
41WM10300^
#10
3”
¼”
17.7#
LENGTH
HEAD AF
WEIGHT
PER M
LENGTH
HEAD AF
CONCRETE NAIL-IN
¼” x 1¼” Nail-in
MATCHING FINISH STAINLESS STEEL
POP RIVET
PRICE PER 1000
1K-10K OVER 10K
PLATED
PAINTED
PLATED
PAINTED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41CM114^
¼”
5
¼” x 1¼” HWH Tapcon®
WEIGHT
PER M
1¼”
⁄16”
SLOTTED
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
10.0#
Standard finish is Blue Climaseal®. Painted fasteners are special order. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
43NI
¼”
LENGTH
1¼”
HEAD AF
N/A
WEIGHT
PER M
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
2.1#
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41PR^
1
41PRLGSC-SO
1
GRIP RANGE
WEIGHT
PER M
⁄8” DIA.
.063” - .125”
2.8#
⁄8” DIA.
.063” - .125”
3.3#
PRICE PER 1000
ALL COLORS
Body and mandrel are stainless steel. Fasteners sold in quantities of 250 only.
SSAR-42
ARCHITECTURAL ACCESSORY PRICING
PLAIN FINISH HWH
SELF-DRILLING FASTENER
ITEM
NUMBER
SIZE
LENGTH
HEAD AF
WEIGHT
PER M
PRICE PER 1000
1K - 10K
OVER 10K
PLATED
41SD100Z12
#12
1”
5
⁄16”
PLATED
22.7#
Use to attach Accent panel to steel sub-framing.
These fasteners are not made for attachment into wood members or wood decking.
12-14 x 1” HWH Teks® 3
FAB-LOK®
ITEM
NUMBER
GRIP RANGE
WEIGHT
PER LF
41FAB104
.062” - .250”
22.5#
PRICE PER 1000
OVER 10K
1K - 10K
FAS-1004
Fab-Lok® FAS-1004 carbon expansion fastener with
5/16” HWH and 5/8” o.d. washer.
ALTERNATE ATTACHMENT ANGLE
ITEM
NUMBER
LENGTH
GAUGE
WEIGHT
PER EA
0’-5”
16
0.3#
PRICE PER EACH
RED OXIDE
GALVANIZED
SA005
52SA000514P
SHADOW WALL-18 CLOSURE PLUGS
52SA000514G
ITEM
NUMBER
WEIGHT
PER EA
42CS18R
0.1#
42CS19R
0.5#
PRICE PER 1000
1K - 10K
OVER 10K
CS18R (OUTSIDE)
CS19R (INSIDE)
SSAR-43
Agricultural/
Residential
Back to
Contents
TABLE OF CONTENTS
Agricultural / Residential
Product
Pages
General Information ................................................................................................................................................................................. AR-1
Sturdi-Line Panels
Sturdi-Span™, Sturdi-Rib (36” coverage) .................................................................................................................................. AR-2 –AR-3
Sturdi-Span™ Plus, Sturdi-Rib Plus (36” coverage) ................................................................................................................... AR-4 – AR-5
Sturdi-Drain (36” coverage) .......................................................................................................................................................... AR-6 – AR-7
Sturdi-Panel (36” coverage).......................................................................................................................................................... AR-8 – AR-9
Weather Guard Panel (12” coverage) ................................................................................................................................... AR-10 – AR-11
Trims
Die-Formed Ridge Caps, Ridge Roll .............................................................................................................................. AR-11 – AR-12
Rake Trim, Rake End Caps, Fascia Cap, Prow Trim, Peak Plate .............................................................................. AR-12 – AR-14
Eave Trim, Eave Fascia Trim, Drip Edge, Mini Eave Trim, Counterflashing, Offset Cleat ...................................... AR-14– AR-17
Box Gutter, Gutter End Caps, Gutter Straps ................................................................................................................ AR-17 – AR-18
Downspouts, Downspout Kickout, Downspout Elbows, Downspout Straps ........................................................ AR-18 – AR-19
Outside Corner Trim, Inside Corner Trim ..................................................................................................................................... AR-19
Drip Trim, Double Angle/Zee Trim, J-Trim, Overhead Door Trim, Door Edge Trim, Door Post Trim,
Door Jamb Trim, Hem Trim .............................................................................................................................................. AR-19 – AR-22
Base Mold Trim, Base Trim/Rat Guard ........................................................................................................................................ AR-22
Inside & Outside Angles with Equal and Unequal Legs ............................................................................................ AR-23 – AR-24
Endwall Transition Trim, Special Transition Trim, Gambrel Flashing, Sidewall Flashing ...................................... AR-24 – AR 25
Fascia Soffit Trim, Gable Base Soffit Trim, Ceiling Wall Trim, F-Trim ...................................................................... AR-25 – AR-26
National Track Cover, Round Door Track Cover, Track Cover End Caps, Track Board Cover Trim ...................... AR26 – AR-27
Valley Trim ........................................................................................................................................................................................ AR-27
K-Series Trim - Gutter, End Caps, Mitered Corner Boxes, Hanger w/ Screw, Downspout Pipe,
Pipe Band, Downspout Elbows, Drop Outlet ................................................................................................................. AR-28 – AR29
Flat Trim Sheets ............................................................................................................................................................................... AR-29
Special Trim ..................................................................................................................................................................................... AR-30
Accessories
Slide Door Track, Side Rail, Bottom, Box Girts, and Hardware ............................................................................... AR-31 – AR-35
Horizontal Slide Storm Windows ................................................................................................................................................ AR-35
Series 3100, Series 5100, and Series 20 Personnel Door Units, Dutch Doors ...................................................... AR-36 – AR-37
Touch Up Paint ............................................................................................................................................................................... AR-37
Peaklites, Light Transmitting Panels ............................................................................................................................... AR-37 – AR-38
16” Center Vented Soffit, Steel and Aluminum ......................................................................................................................... AR-39
Continuous Ridge Vents, Low Profile Ridge Vents, Vented Closure ......................................................................... AR-39 – AR-40
Rubber Pipe Flashing, Polar Blox ....................................................................................................................................AR-40 – AR 41
Tape Sealant, Tube Caulk, Closure Strips, Hi-Acrylic Closure Tape ....................................................................... AR-41 – AR-43
Cupolas, Weather Vanes .............................................................................................................................................................. AR-44
Fasteners, Nails, Pop Rivets ........................................................................................................................................... AR-45 – AR-47
Panel Turn-Up Tool, Panel Shear, Shear Blades ......................................................................................................................... AR-48
This page intentionally left blank.
AR-2
GENERAL INFORMATION
Agricultural / Residential Product Line
With over 50 year’s experience, Whirlwind is a quality manufacturer of metal roofing, siding, accessories, and trim
for the Agricultural and Residential markets. We currently carry five panels (two regional to our Minnesota facility)
offered in a variety of SMP colors with Warranties up to 40 years. In addition Whirlwind also offers energy star
approved and CRRC approved colors. All of Whirlwind’s material contains a minimum of 32% up to 59% recycled
content making Whirlwind’s material environmentally friendly.
Sample Agricultural and Residential Projects include:
Strippable film is available on Weather Guard
panels. Please see the Weather Guard
section for further details and pricing.
AR-1
STURDI-LINE PANEL PRICING
b
b
b
#/6%2!'%
#/6%2!'%
b
b
Ð
052,).
"%!2).'
,%'
b
b
b
052,).
"%!2).'
,%'
STURDI-SPANTM
STURDI-RIB
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
PRICE PER
SQUARE
PRICE PER
LFT.
Galvanized
GALVANIZED
29
65
169.50
5.37
29
65
147.50
4.68
Clear Acrylic
®
GALVALUME
SMP Colors
GALVANIZED / GALVALUME
29
65
196.50
6.23
Clear Acrylic
GALVALUME®
26
92
184.50
5.85
®
Commodity Colors
GALVANIZED
26
96
220.25
6.98
POLY Polar White
GALVALUME®
26
92
224.50
7.12
SMP Standard Colors
GALVALUME®
26
92
233.00
7.39
®
26
92
248.00
7.86
®
KYNAR 500 Colors
GALVALUME
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Galvanized panels are in conformance with ASTM A653, Grade 80, Coating Class G90 if bare, Coating Class G60 if painted.
2. GALVALUME® base metal is in conformance with ASTM A792 Grade 80, Coating Class AZ55 if bare, Coating Class AZ50 if painted.
3. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
4. For factory applied UL 2218 (Impact Resistance Class 4) labels, add $1.00 per panel (Sturdi-Rib Only).
5. All panel pricing is based on a 38” panel width.
6. Yield strength is 80,000 PSI on 29 and 26 gauge panels or 50,000 psi for 26 gauge panels.
7. Availability of 26 gauge colors are limited to those shown on the current Component Commercial/Industrial Color Selection Chart.
8. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
9. Length tolerance is plus or minus ¼” of ordered length.
PACKAGING COSTS:
1. Maximum 3,000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ...........................................................................$14.50 (up to 15’-0”) $26.25 (over15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ...........................$16.50 (up to 15’-0”) $29.25 (over15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap ..............$29.25 (up to 15’-0”) $54.00 (over15’-0”)
5. LTL Crating ......................................................................................................................................$ 4.50 per lineal foot (based on longest panel in crate),
$75.00 minimum per crate
®
AR-2
STURDI-LINE PANEL PRICING
• STURDI-SPANTM
• STURDI-RIB
NUMBER OF SQUARE FEET PER PANEL
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
3.17
6.33
9.50
12.67
15.83
19.00
22.17
25.33
28.50
31.67
34.83
38.00
41.17
44.33
47.50
50.67
53.83
57.00
60.17
63.33
66.50
69.67
72.83
76.00
79.17
82.33
85.50
88.67
91.83
95.00
98.17
101.33
104.50
107.67
110.83
114.00
117.17
120.33
123.50
126.67
3.43
6.60
9.76
12.93
16.10
19.26
22.43
25.60
28.76
31.93
35.10
38.26
41.43
44.60
47.76
50.93
54.10
57.26
60.43
63.60
66.76
69.93
73.10
76.26
79.43
82.60
85.76
88.93
92.10
95.26
98.43
101.60
104.76
107.93
111.10
114.26
117.43
120.60
123.76
126.93
3.69
6.86
10.03
13.19
16.36
19.53
22.69
25.86
29.03
32.19
35.36
38.53
41.69
44.86
48.03
51.19
54.36
57.53
60.69
63.86
67.03
70.19
73.36
76.53
79.49
82.86
86.03
89.19
92.36
95.53
98.69
101.86
105.03
108.19
111.36
114.53
117.69
120.86
124.03
127.19
3.96
7.12
10.29
13.46
16.62
19.79
22.96
26.12
29.29
32.46
35.62
38.79
41.96
45.12
48.29
51.46
54.62
57.59
60.96
64.12
67.29
70.46
73.62
76.79
79.96
83.12
86.29
89.46
92.62
95.79
98.96
102.12
105.29
108.46
111.62
114.79
117.96
121.12
124.29
127.46
4.22
7.39
10.56
13.72
16.89
20.06
23.22
26.39
29.56
32.72
35.89
39.06
42.22
45.39
48.56
51.72
54.89
58.06
61.22
64.39
67.56
70.72
73.89
77.06
80.22
83.39
86.56
89.72
92.89
96.06
99.22
102.39
105.56
108.72
111.89
115.06
118.22
121.39
124.56
127.72
4.49
7.65
10.82
13.99
17.15
20.32
23.49
26.65
29.82
32.99
36.15
39.32
42.49
45.65
48.82
51.99
55.15
58.32
61.49
64.65
67.82
70.99
74.15
77.32
80.49
83.65
86.82
89.99
93.15
96.32
99.49
102.65
105.82
108.99
112.15
115.32
118.49
121.65
124.82
127.99
4.75
7.92
11.08
14.25
17.42
20.58
23.75
26.92
30.08
33.25
36.42
39.58
42.75
45.92
49.08
52.25
55.42
58.58
61.75
64.92
68.08
71.25
74.42
77.58
80.75
83.92
87.08
90.25
93.42
96.58
99.75
102.92
106.08
109.25
112.42
115.58
118.75
121.92
125.08
128.25
5.01
8.18
11.35
14.51
17.68
20.85
24.01
27.18
30.35
33.51
36.68
39.85
43.01
46.18
49.35
52.51
55.68
58.85
62.01
65.18
68.35
71.51
74.68
77.85
81.01
84.18
87.35
90.51
93.68
96.85
100.01
103.18
106.35
109.51
112.68
115.85
119.01
122.18
125.35
128.51
5.28
8.44
11.61
14.78
17.94
21.11
24.28
27.44
30.61
33.78
36.94
40.11
43.28
46.44
49.61
52.78
55.94
59.11
62.28
65.44
68.61
71.78
74.94
78.11
81.28
84.44
87.61
90.78
93.94
97.11
100.28
103.44
106.61
109.78
112.94
116.11
119.28
122.44
125.61
128.78
5.54
8.71
11.87
15.04
18.21
21.37
24.54
27.71
30.87
34.04
37.21
40.37
43.54
46.71
49.87
53.04
56.21
59.37
62.54
65.71
68.87
72.04
75.21
78.37
81.54
84.71
87.87
91.04
94.21
97.37
100.54
103.71
106.87
110.04
113.21
116.37
119.54
122.71
125.87
129.04
5.81
8.97
12.14
15.31
18.47
21.64
24.81
27.97
31.14
34.31
37.47
40.64
43.81
46.97
50.14
53.31
56.47
59.64
62.81
65.97
69.14
72.31
75.47
78.64
81.81
84.97
88.14
91.31
94.47
97.64
100.81
103.97
107.14
110.31
113.47
116.64
119.81
122.97
126.14
129.31
6.07
9.24
12.40
15.57
18.74
21.90
25.07
28.24
31.40
34.57
37.74
40.90
44.07
47.24
50.40
53.57
56.74
59.90
63.07
66.24
69.40
72.57
75.74
78.90
82.07
85.24
88.40
91.57
94.74
97.90
101.07
104.24
107.40
110.57
113.74
116.90
120.07
123.24
126.40
129.57
AR-3
STURDI-LINE PLUS PANEL PRICING
15
⁄16”
⁄8”
3
5
⁄8”
¾”
¾”
1¾”
1¾”
36" COVERAGE
9"
36” COVERAGE
9”
31⁄8” 2¾” 31⁄8”
PURLIN
BEARING
LEG
PURLIN
BEARING
LEG
5
⁄8”
¾”
31⁄8” 2¾” 31⁄8”
STURDI-SPANTM PLUS
STURDI-RIB PLUS
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
PRICE PER
SQUARE
PRICE PER LFT.
Galvanized
GALVANIZED
29
69
178.25
5.65
POLY Polar White
GALVANIZED
29
69
209.50
6.64
SMP Colors
GALVANIZED
29
69
217.50
6.89
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Galvanized panels are in conformance with ASTM A653, Grade 80, Coating Class G90 if bare, Coating Class G90 if painted.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. For factory applied UL 2218 (Impact Resistance Class 4) labels, add $1.00 per panel.
4. All panel pricing is based on a 38” panel width.
5. Yield strength is 80,000 PSI on 29 gauge panels.
6. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
7. Length tolerance is plus or minus 1⁄8” of ordered length.
PACKAGING COSTS:
1. Maximum 3,000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ...........................................................................$14.50 (up to 15’-0”) $26.25 (over15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ...........................$16.50 (up to 15’-0”) $29.25 (over15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap ..............$29.25 (up to 15’-0”) $54.00 (over15’-0”)
5. LTL Crating ......................................................................................................................................$ 4.50 per lineal foot (based on longest panel in crate),
$75.00 minimum per crate
AR-4
STURDI-LINE PLUS PANEL PRICING
• STURDI-SPANTM PLUS
• STURDI-RIB PLUS
NUMBER OF SQUARE FEET PER PANEL
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
3.17
6.33
9.50
12.67
15.83
19.00
22.17
25.33
28.50
31.67
34.83
38.00
41.17
44.33
47.50
50.67
53.83
57.00
60.17
63.33
66.50
69.67
72.83
76.00
79.17
82.33
85.50
88.67
91.83
95.00
98.17
101.33
104.50
107.67
110.83
114.00
117.17
120.33
123.50
126.67
3.43
6.60
9.76
12.93
16.10
19.26
22.43
25.60
28.76
31.93
35.10
38.26
41.43
44.60
47.76
50.93
54.10
57.26
60.43
63.60
66.76
69.93
73.10
76.26
79.43
82.60
85.76
88.93
92.10
95.26
98.43
101.60
104.76
107.93
111.10
114.26
117.43
120.60
123.76
126.93
3.69
6.86
10.03
13.19
16.36
19.53
22.69
25.86
29.03
32.19
35.36
38.53
41.69
44.86
48.03
51.19
54.36
57.53
60.69
63.86
67.03
70.19
73.36
76.53
79.49
82.86
86.03
89.19
92.36
95.53
98.69
101.86
105.03
108.19
111.36
114.53
117.69
120.86
124.03
127.19
3.96
7.12
10.29
13.46
16.62
19.79
22.96
26.12
29.29
32.46
35.62
38.79
41.96
45.12
48.29
51.46
54.62
57.59
60.96
64.12
67.29
70.46
73.62
76.79
79.96
83.12
86.29
89.46
92.62
95.79
98.96
102.12
105.29
108.46
111.62
114.79
117.96
121.12
124.29
127.46
4.22
7.39
10.56
13.72
16.89
20.06
23.22
26.39
29.56
32.72
35.89
39.06
42.22
45.39
48.56
51.72
54.89
58.06
61.22
64.39
67.56
70.72
73.89
77.06
80.22
83.39
86.56
89.72
92.89
96.06
99.22
102.39
105.56
108.72
111.89
115.06
118.22
121.39
124.56
127.72
4.49
7.65
10.82
13.99
17.15
20.32
23.49
26.65
29.82
32.99
36.15
39.32
42.49
45.65
48.82
51.99
55.15
58.32
61.49
64.65
67.82
70.99
74.15
77.32
80.49
83.65
86.82
89.99
93.15
96.32
99.49
102.65
105.82
108.99
112.15
115.32
118.49
121.65
124.82
127.99
4.75
7.92
11.08
14.25
17.42
20.58
23.75
26.92
30.08
33.25
36.42
39.58
42.75
45.92
49.08
52.25
55.42
58.58
61.75
64.92
68.08
71.25
74.42
77.58
80.75
83.92
87.08
90.25
93.42
96.58
99.75
102.92
106.08
109.25
112.42
115.58
118.75
121.92
125.08
128.25
5.01
8.18
11.35
14.51
17.68
20.85
24.01
27.18
30.35
33.51
36.68
39.85
43.01
46.18
49.35
52.51
55.68
58.85
62.01
65.18
68.35
71.51
74.68
77.85
81.01
84.18
87.35
90.51
93.68
96.85
100.01
103.18
106.35
109.51
112.68
115.85
119.01
122.18
125.35
128.51
5.28
8.44
11.61
14.78
17.94
21.11
24.28
27.44
30.61
33.78
36.94
40.11
43.28
46.44
49.61
52.78
55.94
59.11
62.28
65.44
68.61
71.78
74.94
78.11
81.28
84.44
87.61
90.78
93.94
97.11
100.28
103.44
106.61
109.78
112.94
116.11
119.28
122.44
125.61
128.78
5.54
8.71
11.87
15.04
18.21
21.37
24.54
27.71
30.87
34.04
37.21
40.37
43.54
46.71
49.87
53.04
56.21
59.37
62.54
65.71
68.87
72.04
75.21
78.37
81.54
84.71
87.87
91.04
94.21
97.37
100.54
103.71
106.87
110.04
113.21
116.37
119.54
122.71
125.87
129.04
5.81
8.97
12.14
15.31
18.47
21.64
24.81
27.97
31.14
34.31
37.47
40.64
43.81
46.97
50.14
53.31
56.47
59.64
62.81
65.97
69.14
72.31
75.47
78.64
81.81
84.97
88.14
91.31
94.47
97.64
100.81
103.97
107.14
110.31
113.47
116.64
119.81
122.97
126.14
129.31
6.07
9.24
12.40
15.57
18.74
21.90
25.07
28.24
31.40
34.57
37.74
40.90
44.07
47.24
50.40
53.57
56.74
59.90
63.07
66.24
69.40
72.57
75.74
78.90
82.07
85.24
88.40
91.57
94.74
97.90
101.07
104.24
107.40
110.57
113.74
116.90
120.07
123.24
126.40
129.57
AR-5
STURDI-LINE PANEL PRICING
⁄16”
½”
15
21⁄16”
36" COVERAGE
TYP
PURLIN
BEARING
LEG
½”
3”
STURDI-DRAIN
REGIONAL PANEL
MINNESOTA ONLY
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
PRICE PER
SQUARE
PRICE PER LFT.
Galvanized
GALVANIZED
29
72
186.75
5.92
POLY Polar White
GALVANIZED
29
72
209.50
6.64
SMP Colors
GALVANIZED
29
72
217.50
6.89
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Galvanized panels are in conformance with ASTM A653, Grade 80, Coating Class G90 if bare, Coating Class G60 if painted.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. All panel pricing is based on a 38” panel width.
4. Yield strength is 80,000 PSI on 29 gauge panels.
5. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
6. Length tolerance is plus or minus 1⁄8” of ordered length.
7. Regional to Minnesota only.
PACKAGING COSTS:
1. Maximum 3,000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ...........................................................................$14.50 (up to 15’-0”) $26.25 (over15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ...........................$16.50 (up to 15’-0”) $29.25 (over15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap ..............$29.25 (up to 15’-0”) $54.00 (over15’-0”)
5. LTL Crating ......................................................................................................................................$ 4.50 per lineal foot (based on longest panel in crate),
$75.00 minimum per crate
AR-6
STURDI-LINE PANEL PRICING
• STURDI-DRAIN
NUMBER OF SQUARE FEET PER PANEL
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
3.17
6.33
9.50
12.67
15.83
19.00
22.17
25.33
28.50
31.67
34.83
38.00
41.17
44.33
47.50
50.67
53.83
57.00
60.17
63.33
66.50
69.67
72.83
76.00
79.17
82.33
85.50
88.67
91.83
95.00
98.17
101.33
104.50
107.67
110.83
114.00
117.17
120.33
123.50
126.67
3.43
6.60
9.76
12.93
16.10
19.26
22.43
25.60
28.76
31.93
35.10
38.26
41.43
44.60
47.76
50.93
54.10
57.26
60.43
63.60
66.76
69.93
73.10
76.26
79.43
82.60
85.76
88.93
92.10
95.26
98.43
101.60
104.76
107.93
111.10
114.26
117.43
120.60
123.76
126.93
3.69
6.86
10.03
13.19
16.36
19.53
22.69
25.86
29.03
32.19
35.36
38.53
41.69
44.86
48.03
51.19
54.36
57.53
60.69
63.86
67.03
70.19
73.36
76.53
79.49
82.86
86.03
89.19
92.36
95.53
98.69
101.86
105.03
108.19
111.36
114.53
117.69
120.86
124.03
127.19
3.96
7.12
10.29
13.46
16.62
19.79
22.96
26.12
29.29
32.46
35.62
38.79
41.96
45.12
48.29
51.46
54.62
57.59
60.96
64.12
67.29
70.46
73.62
76.79
79.96
83.12
86.29
89.46
92.62
95.79
98.96
102.12
105.29
108.46
111.62
114.79
117.96
121.12
124.29
127.46
4.22
7.39
10.56
13.72
16.89
20.06
23.22
26.39
29.56
32.72
35.89
39.06
42.22
45.39
48.56
51.72
54.89
58.06
61.22
64.39
67.56
70.72
73.89
77.06
80.22
83.39
86.56
89.72
92.89
96.06
99.22
102.39
105.56
108.72
111.89
115.06
118.22
121.39
124.56
127.72
4.49
7.65
10.82
13.99
17.15
20.32
23.49
26.65
29.82
32.99
36.15
39.32
42.49
45.65
48.82
51.99
55.15
58.32
61.49
64.65
67.82
70.99
74.15
77.32
80.49
83.65
86.82
89.99
93.15
96.32
99.49
102.65
105.82
108.99
112.15
115.32
118.49
121.65
124.82
127.99
4.75
7.92
11.08
14.25
17.42
20.58
23.75
26.92
30.08
33.25
36.42
39.58
42.75
45.92
49.08
52.25
55.42
58.58
61.75
64.92
68.08
71.25
74.42
77.58
80.75
83.92
87.08
90.25
93.42
96.58
99.75
102.92
106.08
109.25
112.42
115.58
118.75
121.92
125.08
128.25
5.01
8.18
11.35
14.51
17.68
20.85
24.01
27.18
30.35
33.51
36.68
39.85
43.01
46.18
49.35
52.51
55.68
58.85
62.01
65.18
68.35
71.51
74.68
77.85
81.01
84.18
87.35
90.51
93.68
96.85
100.01
103.18
106.35
109.51
112.68
115.85
119.01
122.18
125.35
128.51
5.28
8.44
11.61
14.78
17.94
21.11
24.28
27.44
30.61
33.78
36.94
40.11
43.28
46.44
49.61
52.78
55.94
59.11
62.28
65.44
68.61
71.78
74.94
78.11
81.28
84.44
87.61
90.78
93.94
97.11
100.28
103.44
106.61
109.78
112.94
116.11
119.28
122.44
125.61
128.78
5.54
8.71
11.87
15.04
18.21
21.37
24.54
27.71
30.87
34.04
37.21
40.37
43.54
46.71
49.87
53.04
56.21
59.37
62.54
65.71
68.87
72.04
75.21
78.37
81.54
84.71
87.87
91.04
94.21
97.37
100.54
103.71
106.87
110.04
113.21
116.37
119.54
122.71
125.87
129.04
5.81
8.97
12.14
15.31
18.47
21.64
24.81
27.97
31.14
34.31
37.47
40.64
43.81
46.97
50.14
53.31
56.47
59.64
62.81
65.97
69.14
72.31
75.47
78.64
81.81
84.97
88.14
91.31
94.47
97.64
100.81
103.97
107.14
110.31
113.47
116.64
119.81
122.97
126.14
129.31
6.07
9.24
12.40
15.57
18.74
21.90
25.07
28.24
31.40
34.57
37.74
40.90
44.07
47.24
50.40
53.57
56.74
59.90
63.07
66.24
69.40
72.57
75.74
78.90
82.07
85.24
88.40
91.57
94.74
97.90
101.07
104.24
107.40
110.57
113.74
116.90
120.07
123.24
126.40
129.57
AR-7
STURDI-LINE PANEL PRICING
¾”
¾”
3
¾”
⁄8”
2¼”
36” COVERAGE
9”
5
⁄8”
PURLIN
BEARING
LEG
STURDI
PANEL™
STURDI-PANEL
REGIONAL PANEL
MINNESOTA ONLY
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
PRICE PER
SQUARE
PRICE PER LFT.
Galvanized
GALVANIZED
29
70
182.50
5.79
POLY Polar White
GALVANIZED
29
70
204.75
6.49
SMP Colors
GALVANIZED
29
70
212.50
6.74
MINIMUM
ORDER
PANEL PRICING NOTES:
1. Galvanized panels are in conformance with ASTM A653, Grade 80, Coating Class G90 if bare, Coating Class G60 if painted.
2. Cutting charge for panels less than 4’-0” in length is $1.00 per panel.
3. All panel pricing is based on a 38” panel width.
4. Yield strength is 80,000 PSI on 29 gauge panels.
5. Add $25.00 set-up charge for reverse run panels (upside down) or quantities less than 2 squares.
6. Length tolerance is plus or minus 1⁄8” of ordered length.
7. Regional to Minnesota only.
PACKAGING COSTS:
1. Maximum 3,000 lbs. per bundle, unless specified otherwise by customer.
2. Block and band with waterproof paper wrap ...........................................................................$14.50 (up to 15’-0”) $26.25 (over15’-0”)
3. Block and band with waster sheet top only and waterproof paper wrap ...........................$16.50 (up to 15’-0”) $29.25 (over15’-0”)
4. Block and band with waster sheet top and bottom and waterproof paper wrap ..............$29.25 (up to 15’-0”) $54.00 (over15’-0”)
5. LTL Crating ......................................................................................................................................$ 4.50 per lineal foot (based on longest panel in crate),
$75.00 minimum per crate
AR-8
STURDI-LINE PANEL PRICING
• STURDI-PANEL
NUMBER OF SQUARE FEET PER PANEL
FT.
0”
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
3.17
6.33
9.50
12.67
15.83
19.00
22.17
25.33
28.50
31.67
34.83
38.00
41.17
44.33
47.50
50.67
53.83
57.00
60.17
63.33
66.50
69.67
72.83
76.00
79.17
82.33
85.50
88.67
91.83
95.00
98.17
101.33
104.50
107.67
110.83
114.00
117.17
120.33
123.50
126.67
3.43
6.60
9.76
12.93
16.10
19.26
22.43
25.60
28.76
31.93
35.10
38.26
41.43
44.60
47.76
50.93
54.10
57.26
60.43
63.60
66.76
69.93
73.10
76.26
79.43
82.60
85.76
88.93
92.10
95.26
98.43
101.60
104.76
107.93
111.10
114.26
117.43
120.60
123.76
126.93
3.69
6.86
10.03
13.19
16.36
19.53
22.69
25.86
29.03
32.19
35.36
38.53
41.69
44.86
48.03
51.19
54.36
57.53
60.69
63.86
67.03
70.19
73.36
76.53
79.49
82.86
86.03
89.19
92.36
95.53
98.69
101.86
105.03
108.19
111.36
114.53
117.69
120.86
124.03
127.19
3.96
7.12
10.29
13.46
16.62
19.79
22.96
26.12
29.29
32.46
35.62
38.79
41.96
45.12
48.29
51.46
54.62
57.59
60.96
64.12
67.29
70.46
73.62
76.79
79.96
83.12
86.29
89.46
92.62
95.79
98.96
102.12
105.29
108.46
111.62
114.79
117.96
121.12
124.29
127.46
4.22
7.39
10.56
13.72
16.89
20.06
23.22
26.39
29.56
32.72
35.89
39.06
42.22
45.39
48.56
51.72
54.89
58.06
61.22
64.39
67.56
70.72
73.89
77.06
80.22
83.39
86.56
89.72
92.89
96.06
99.22
102.39
105.56
108.72
111.89
115.06
118.22
121.39
124.56
127.72
4.49
7.65
10.82
13.99
17.15
20.32
23.49
26.65
29.82
32.99
36.15
39.32
42.49
45.65
48.82
51.99
55.15
58.32
61.49
64.65
67.82
70.99
74.15
77.32
80.49
83.65
86.82
89.99
93.15
96.32
99.49
102.65
105.82
108.99
112.15
115.32
118.49
121.65
124.82
127.99
4.75
7.92
11.08
14.25
17.42
20.58
23.75
26.92
30.08
33.25
36.42
39.58
42.75
45.92
49.08
52.25
55.42
58.58
61.75
64.92
68.08
71.25
74.42
77.58
80.75
83.92
87.08
90.25
93.42
96.58
99.75
102.92
106.08
109.25
112.42
115.58
118.75
121.92
125.08
128.25
5.01
8.18
11.35
14.51
17.68
20.85
24.01
27.18
30.35
33.51
36.68
39.85
43.01
46.18
49.35
52.51
55.68
58.85
62.01
65.18
68.35
71.51
74.68
77.85
81.01
84.18
87.35
90.51
93.68
96.85
100.01
103.18
106.35
109.51
112.68
115.85
119.01
122.18
125.35
128.51
5.28
8.44
11.61
14.78
17.94
21.11
24.28
27.44
30.61
33.78
36.94
40.11
43.28
46.44
49.61
52.78
55.94
59.11
62.28
65.44
68.61
71.78
74.94
78.11
81.28
84.44
87.61
90.78
93.94
97.11
100.28
103.44
106.61
109.78
112.94
116.11
119.28
122.44
125.61
128.78
5.54
8.71
11.87
15.04
18.21
21.37
24.54
27.71
30.87
34.04
37.21
40.37
43.54
46.71
49.87
53.04
56.21
59.37
62.54
65.71
68.87
72.04
75.21
78.37
81.54
84.71
87.87
91.04
94.21
97.37
100.54
103.71
106.87
110.04
113.21
116.37
119.54
122.71
125.87
129.04
5.81
8.97
12.14
15.31
18.47
21.64
24.81
27.97
31.14
34.31
37.47
40.64
43.81
46.97
50.14
53.31
56.47
59.64
62.81
65.97
69.14
72.31
75.47
78.64
81.81
84.97
88.14
91.31
94.47
97.64
100.81
103.97
107.14
110.31
113.47
116.64
119.81
122.97
126.14
129.31
6.07
9.24
12.40
15.57
18.74
21.90
25.07
28.24
31.40
34.57
37.74
40.90
44.07
47.24
50.40
53.57
56.74
59.90
63.07
66.24
69.40
72.57
75.74
78.90
82.07
85.24
88.40
91.57
94.74
97.90
101.07
104.24
107.40
110.57
113.74
116.90
120.07
123.24
126.40
129.57
AR-9
WEATHER GUARD PANEL PRICING
1” X ¼” SLOT
EQUALLY SPACED
EVERY 5 3⁄16”
Side Lap Detail
12” COVERAGE
¾”
WEATHER GUARD
FINISH
BASE METAL
GAUGE
WEIGHT PER
SQUARE
Clear Acrylic
GALVALUME®
26
110
SMP Colors
GALVALUME®
26
110
PRICE PER
SQUARE
PRICE PER
LFT.
MINIMUM
ORDER
PANEL PRICING:
1. All pricing is based on net coverage.
2. For short panel lengths, add: $3.65 for panels 1” to 3’-11”.
3. Panels will be sold with striations (minor rib configuration is available for a $50.00 set-up fee).
4. Pricing for Deep Blue KYNAR®, add 25.67 per square.
5. For factory applied UL2218 (Impact Resistance Class 4) labels, add $1.00 per panel.
PACKAGE PRICING:
1. 20 panels per bundle, with a maximum of 3000# per bundle.
2. Standard packaging includes cardboard box with protective strippable film on each panel face.
3. Panels shipped LTL require plywood crating.
4. Plywood crating: Add $8.75 per square, minimum $107.50 per crate for plywood crating.
5. Please consult your salesperson for special packaging prices.
NOTES:
1. Maximum panel length is 40’-0”.
2. Panel pricing reflects colors available on the current Lightgage / Residential Panel & Trim Color Selection Chart. For gauges not listed or special colors,
please inquire.
3. Oil-canning is not a cause for rejection - Installation constitutes acceptance.
4. All square pricing is based on net pricing 12” (100 LFT = 1 square).
5. Panels will be produced in Houston, Tulsa, Atlanta, Freeport.
6. Minimum roof slope; 3:12.
7. Please consult design/installation manual for underlayment and substrate recommendations. This panel is not designed to be installed over open-framing.
8. Colors available: Galvalume®, Polar White, Crimson Red, Sahara Tan, Colonial Red, Koko Brown, Cool White, Fern Green, Burgundy, Hawaiian Blue, Light
Stone, Surfsand, Burnished Slate, Steel Gray, Kynar® Deep Blue.
9. Panels cannot be end lapped.
10. Strippable film must be removed within 7 days of arrival to prevent permanent adhesion. See General Information on page AR-1 for sample strippable film
label.
®
AR-10
STURDI-LINE TRIM PRICING
STURDI-RIB FORMED RIDGE CAP
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SRRC^
3’-0”
29
407⁄8”
6.6#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SPRC^
3’-0”
29
407⁄8”
6.6#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1519^106
10’-6”
29
14¾”
8.2#
50SR1519^126
12’-6”
29
14¾”
9.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1019^106
10’-6”
29
19¾”
11.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1029^106
10’-6”
29
13¾”
8.0#
PRICE PER EACH
GALVALUME®
WHITE
SMP COLOR
32.65
34.45
SRRC
g
30.45
GTH
,EN
FY
ECI
3P
LTL Skid: $25.00
Specify roof slope when ordering.
STURDI-SPAN FORMED RIDGE CAP
PRICE PER EACH
GALVALUME®
WHITE
SMP COLOR
STRC
g
,
CIFY
3PE
TH
ENG
LTL Skid: $25.00
Specify roof slope when ordering.
14” RIDGE CAP W/ HEMS
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-151
cL Sym. Abt.
3
6¾
Color
3
35°
See Chart
⁄
7 8
145°
155°
25°
20” UNIVERSAL RIDGE CAP
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-101
Ð
Ð
LTL Skid $50.00
Ridge Roll Skid $25.00
Maximum 100 pieces per skid
Trim set at 4:12 slope.
14” UNIVERSAL RIDGE CAP
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-102
Ð
Ð
Trim set at 4:12 slope.
AR-11
STURDI-LINE TRIM PRICING
RIDGE / HIP
ITEM
NUMBER
LENGTH
50HF120
10’-6”
GAUGE
GIRTH
WT. / EA.
14’4”
9-7#
GIRTH
WT. / EA.
11½”
7.6#
PRICE PER EACH
GALVALUME®
SMP COLOR
HF-120
#OLOR
b
26
"EVEL
Specify bevel angle. Specify roof slope when ordering.
RESIDENTIAL RAKE
SR-115
ITEM
NUMBER
LENGTH
50SR115^
10’-6”
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR115H9^106
10’-6”
29
11½”
6.4#
50SR1169^
4”
29
1¾”
0.1#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1179^106
10’-6”
29
125⁄8”
7.0#
50SR1179^126
12’-6”
29
125⁄8”
8.4#
50SR1179^146
14’-6”
29
125⁄8”
9.7#
50SR1179^166
16’-6”
29
125⁄8”
11.0#
GAUGE
PRICE PER EACH
GALVALUME®
SMP COLOR
26
b
b
#OLOR
RESIDENTIAL RAKE TRIM
SR-115H
13
4
SMP COLOR
⁄16 ¾
13
⁄16
Color
PRICE PER EACH
GALVALUME®/GALV
⁄58
7
⁄16
4
⁄
1 8
1
7
⁄16
SR-116
SR-116: Rake trim end cap.
RAKE/OUTSIDE CORNER TRIM
SR-117
Ð
b
Ð
b
AR-12
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE TRIM PRICING
4” PROW TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1659^106
10’-6”
29
16½”
9.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1689^106
10’-6”
29
121⁄16”
6.7#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1699^106
10’-6”
29
6”
3.3#
ITEM
NUMBER
LENGTH
GIRTH
WT. / EA.
50ST801^
10’-6”
215⁄16”
1.9#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-165
11⁄16
2
8
5
⁄8
Color
½
¾
4
1¼
BOXED END FASCIA
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-168
¾
4
⁄
11
16
¾
¾
4½
Color
½
1¼
FASCIA CAP
SR-169
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
5
Tension
Break
2
4
Color
2
⁄8
20°
¼
11⁄8
RAKE SUPPORT
GAUGE
PRICE PER EACH
GALVALUME®
SMP COLOR
ST-801
b
26
#OLOR
AR-13
STURDI-LINE TRIM PRICING
PEAK PLATE
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1499^
2’-0”
29
13½”
1.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1129^106
10’-6”
29
103⁄16”
5.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1139^106
10’-6”
29
71⁄8”
3.9#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-149
g
g
EAVE DRIP TRIM
SR-112
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
b
b
Trim set at 4:12 Slope.
RESIDENTIAL EAVE TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-113
b
Trim set at 4:12 slope. Can be ordered with a variable slope.
EAVE FASCIA TRIM
See
Shipper
1:12
2:12
3:12
4:12
5:12
6:12
7:12
8:12
9:12
10:12
11:12
12:12
94°
99°
104°
108°
112°
116°
120°
123°
126°
129°
132°
135°
WT./ EA.
50SR114H9^106
10’-6”
29
9”
5.0#
See
Chart
Color
13 16
⁄
9 16
⁄
AR-14
GIRTH
2 9⁄16
4
Req'd Angle
GAUGE
⁄
Roof Slope
LENGTH
9 16
12
11⁄8
SR-114H
ITEM
NUMBER
Trim set at 4:12 slope. Can be ordered with a variable slope.
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE TRIM PRICING
DRIP EDGE
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1509^106
10’-6”
29
7”
3.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1679^106
10’-6”
29
69⁄16”
3.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1599^106
10’-6”
29
45⁄8”
2.6#
ITEM
NUMBER
LENGTH
GIRTH
WT. / EA.
50ET62^
10’-6”
83⁄4“
5.2#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-150
#OLOR
MINI EAVE TRIM
SR-167
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
⁄
11
16
¾
¾
Color
1¾
2½
¾
COUNTER FLASHING
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-159
¾
2¼
Color
⁄
5 8
½
LOW SIDE EAVE TRIM
CONCEALED CLIP
GAUGE
PRICE PER EACH
GALVALUME®
SMP COLOR
ET-62_
26
#OLOR
/PENHEM
Requires Cleat SS-609. Specify roof slope when ordering.
AR-15
STURDI-LINE TRIM PRICING
HEM EAVE
ET-67_
ITEM
NUMBER
LENGTH
50ET67^
10’-6”
GAUGE
GIRTH
WT. / EA.
11¼”
7.0#
6½”
3.8#
PRICE PER EACH
GALVALUME®
SMP COLOR
5”
1”
Specify Angle
Color
26
4”
¾”
ET-67_
½”
For roof slopes less than 4:12. Specify roof slope when ordering.
ET-67A
12
See
Shipper
1¼
See Chart
50ET67A^
10’-6”
26
¾
4
Color
135°
½
12
12
ET-67A_
Open Hem
For roof slopes EQUAL TO OR GREATER than 4:12. Specify roof slope when ordering.
ET-67B
4
Color
50ET67B^
10’-6”
26
5”
2.7#
GIRTH
WT. / EA.
11¼”
7.0#
GIRTH
WT. / EA.
3½”
2.8#
1
Open Hem
ET-67B
HIGH SIDE EAVE
For roof slopes EQUAL TO OR GREATER than 4:12.
ITEM
NUMBER
LENGTH
50ET68^
10’-6”
GAUGE
PRICE PER EACH
GALVALUME®
SMP COLOR
ET-68_
5½”
4”
26
¾”
½”
½”
OFFSET CLEAT
Specify roof slope when ordering.
ITEM
NUMBER
LENGTH
50SS6084M103
10’-3”
GAUGE
SS-608
AR-16
24
PRICE PER EACH
GALVALUME®
SMP COLOR
STURDI-LINE TRIM PRICING
CONTINUOUS CLEAT
ITEM
NUMBER
LENGTH
50SS6094M103
10’-3”
ITEM
NUMBER
50SR1049^106
GAUGE
GIRTH
WT. / EA.
24
3”
2.4#
LENGTH
GAUGE
GIRTH
WT./ EA.
10’-6”
29
19¾”
10.8#
PRICE PER EACH
GALVALUME®
SMP COLOR
SS-609
—
BOX GUTTER
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR

SR-104

Requires SR-105 end cap. Specify roof slope when ordering.
BOX GUTTER END CAP
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1059^
N/A
29
N/A
0.1#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT. / EA.
50GU8O_^
10’-6”
20½”
13.3#
GIRTH
WT. / EA.
N/A
0.2#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-105
This cap used for both ends.
BOX GUTTER
GU-80_
PRICE PER EACH
GALVALUME®
SMP COLOR
3½”
¾”
1”
26
4½”
4¼”
5¼”
Specify roof slope when ordering.
BOX GUTTER END CAP
ITEM
NUMBER
LENGTH
50BEC^
N/A
GAUGE
PRICE PER EACH
GALVALUME®
SMP COLOR
BEC
26
This cap used for both ends.
AR-17
STURDI-LINE TRIM PRICING
GUTTER SUPPORT STRAP
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1069^
1’-0”
29
3”
0.2#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1079^106
10’-6”
29
16”
9.0#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1089^
N/A
29
N/A
0.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1099^
1’-311⁄16”
29
16”
1.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1109^
613⁄16”
29
16”
0.9#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-106
DOWNSPOUT
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-107
DOWNSPOUT KICKOUT
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-108
DOWNSPOUT OFFSET
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-109
DOWNSPOUT ELBOW
SR-110
AR-18
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE TRIM PRICING
DOWNSPOUT STRAP
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1119^
1¼”
29
83⁄8”
0.1#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1199^106
10’-6”
29
93⁄8”
5.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1209^106
10’-6”
29
125⁄8”
7.1#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1239^106
10’-6”
29
47⁄8”
2.8#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-111
b
b
RESIDENTIAL OUTSIDE CORNER
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-119
b
Ð
Ð
b
b
#OLOR
INSIDE CORNER TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-120
Ð
b
b
Ð
#OLOR
DRIP FLASHING
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-123
#OLOR
Ð
AR-19
STURDI-LINE TRIM PRICING
DOUBLE ANGLE / ZEE TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1579^106
10’-6”
29
4½”
2.6#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1229^106
10’-6”
29
47⁄8”
2.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1259^106
10’-6”
29
12”
6.6#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1709^106
10’-6”
29
131⁄8”
6.6#
50SR1709^126
12’-6”
29
131⁄8”
7.8#
50SR1709^146
14’-6”
29
131⁄8”
8.9#
50SR1709^166
16’-6”
29
131⁄8”
10.2#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-157
7
2
⁄8
11⁄8
Color
J-CHANNEL TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-122
#OLOR
b
OVERHEAD DOOR TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-125
1
21/8
7/8
71/8
Color
OVERHEAD DOOR TRIM
SR-170
Color
AR-20
21/8
1
7/8
71/8
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE TRIM PRICING
OVERHEAD DOOR W/ DRIP FLASHING
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1569^106
10’-6”
29
11¾”
6.7#
50SR1569^126
12’-6”
29
11¾”
8.0#
50SR1569^146
14’-6”
29
11¾”
9.2#
50SR1569^166
16’-6”
29
11¾”
10.5#
ITEM NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR126H9^106
10’-6”
29
105⁄8”
5.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT. / EA.
50SR1279^106
10’-6”
29
111⁄2”
6.3#
50SR1279^126
12’-6”
29
111⁄2”
7.5#
50SR1279^146
14’-6”
29
111⁄2”
8.7#
50SR1279^166
16’-6”
29
111⁄2”
9.9#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1639^106
10’-6”
29
14”
7.9#
50SR1639^126
12’-6”
29
14”
9.4#
50SR1639^146
14’-6”
29
14”
10.9#
50SR1639^166
16’-6”
29
14”
12.4#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-156
⁄8
2±
7
½
Color
½
77⁄8
DOOR EDGE TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-126H
71⁄2” DOOR POST TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-127
b

#OLOR
b
DOOR POST TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-163
1½
15⁄8
Color
9¾
11⁄8
AR-21
STURDI-LINE TRIM PRICING
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1649^106
10’-6”
29
81⁄8”
4.5#
50SR1649^126
12’-6”
29
81⁄8”
5.4#
50SR1649^146
14’-6”
29
81⁄8”
6.2#
15⁄8
50SR1649^166
16’-6”
29
81⁄8”
7.1#
HEM TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1669^106
10’-6”
29
35⁄8”
2.0#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1379^106
10’-6”
29
47⁄8”
2.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1559^106
10’-6”
29
4¼”
2.4#
50SR1559^126
12’-6”
29
4¼”
2.8#
3½” DOOR JAMB TRIM
SR-164
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
¼
⁄
3
8
¼
1½
3¼
3½
13⁄8
Color
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-166
1”
½”
1
⁄8”
2”
1” BASE TRIM/RAT GUARD
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-137
b
Ð
#OLOR
BASE MOLD TRIM
SR-155
1
1
1¼
Color
1
AR-22
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE TRIM PRICING
1½” X 1½” ANGLE
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1289^106
10’-6”
29
4”
2.3#
50SR2289^106
10’-6”
29
4”
2.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1309^106
10’-6”
29
5”
2.8#
50SR2309^106
10’-6”
29
5”
2.8#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR132H9^106
10’-6”
29
6”
3.4#
50SR232H9^106
10’-6”
29
6”
3.4#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR133H9^106
10’-6”
29
7”
4.0#
50SR233H9^106
10’-6”
29
7”
4.0#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
1½
1½
SR-128 (OUTSIDE)
Color
SR-228 (INSIDE)
Color
2” X 2” ANGLE
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
2
2
SR-130 (OUTSIDE)
Color
SR-230 (OUTSIDE)
Color
1½” X 3½” ANGLE W/ HEMS
SR-132H (OUTSIDE)
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
3½
1½
Color
SR-132H
(OUTSIDE)
SR-232H (INSIDE)
3½
1½
Color
SR-232H
(INSIDE)
3” X 3” ANGLE W/ HEMS
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
3
SR-133H (OUTSIDE)
SR-133H
(OUTSIDE)
Color
3
SR-233H (INSIDE)
3
SR-233H
(INSIDE)
Color
3
AR-23
STURDI-LINE ACCESSORY PRICING
1½” X 5½” ANGLE W/ HEMS
SR-134H (OUTSIDE) Color
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR134H9^106
10’-6”
29
8”
4.5#
50SR234H9^106
10’-6”
29
8”
4.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR135H9^106
10’-6”
29
10”
5.7#
50SR235H9^106
10’-6”
29
10”
5.7#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR154H9^106
10’-6”
29
11¾”
6.7#
50SR254H9^106
10’-6”
29
11¾”
6.7#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1399^106
10’-6”
29
11½”
6.5#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
5½
1½
SR-134H
(OUTSIDE)
1½
SR-234H (INSIDE)
5½
SR-234H
Color
(INSIDE)
1½” X 7½” ANGLE W/ HEMS
SR-135H (OUTSIDE)
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
7½
Color
1½
SR-135H
(OUTSIDE)
1½
SR-235H (INSIDE)
7½
SR-235H
Color
(INSIDE)
1½” X 9¼” ANGLE W/ HEMS
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-154H (OUTSIDE)
9¼
1½
Color
SR-154H
(OUTSIDE)
SR-254H (INSIDE)
1½
9¼
SR-254H
Color
(INSIDE)
UNIVERSAL ENDWALL TRIM
SR-139
#OLOR
Trim set at 4:12 slope.
AR-24
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE ACCESSORY PRICING
SPECIAL TRANSITION TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1409^106
10’-6”
29
11½”
6.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1419^106
10’-6”
29
11½”
6.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1429^106
10’-6”
29
11½”
6.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1529^106
10’-6”
29
9¼”
5.2#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1439^106
10’-6”
29
19¾”
11.2#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-140
#OLOR
!NGLE
Angle set at 150°.
GAMBREL FLASHING
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-141
#OLOR
!NGLE
Angle set at 120°.
ENDWALL TRANSITION TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-142
#OLOR
b
Ð
Trim set at 4:12 slope.
SIDEWALL FLASHING
SR-152
11
SMP COLOR
⁄16 ¾
Color
11
⁄16
3
4
PRICE PER EACH
GALVALUME®/GALV
1
FASCIA SOFFIT TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-143

g
#OLOR
AR-25
STURDI-LINE ACCESSORY PRICING
GABLE BASE SOFFIT TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1449^106
10’-6”
29
20¼”
11.0#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1609^106
10’-6”
29
95⁄8”
5.5#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1619^106
10’-6”
29
9¼”
5.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1629^106
10’-6”
29
5¼”
3.0#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1469^106
10’-6”
29
11½”
6.3#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-144
b
b
#OLOR
F-TRIM ½” OFF-SET
SR-160
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
2¾
7
Color
25⁄8
21⁄8
¾
½
⁄8
F-TRIM 7⁄8” OFF-SET
SR-161
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
2¾
7
1¾
¾
25⁄8
7
⁄8
⁄8
Color
CEILING WALL TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
2½
⁄8
SR-162
1
7
Color
7
⁄8
NATIONAL TRACK COVER
SR-146
b
b
b
b
#OLOR
AR-26
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
STURDI-LINE ACCESSORY PRICING
ROUND DOOR TRACK COVER
SR-147
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1479^106
10’-6”
29
12”
6.6#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
b
b
b
#OLOR
b
Ð
TRACK COVER, END CAP
ITEM
NUMBER
GAUGE
WT./ EA.
29
0.2#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-147EC
Color
LEFT
50SR147ECL9^
50SR147ECR9^
Color
RIGHT
Specify Left or Right.
TRACK BOARD COVER TRIM
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1589^106
10’-6”
29
6”
3.4#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1459^106
10’-6”
29
203⁄8”
11.3#
ITEM
NUMBER
LENGTH
GAUGE
GIRTH
WT./ EA.
50SR1539^106
10’-6”
29
407⁄8”
23.4#
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
11⁄8
33⁄8
SR-158
Color
1½
20” VALLEY TRIM
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-145 3PECIFYANGLE
#OLOR
b
b
VALLEY TRIM
Specify angle when ordering.
PRICE PER EACH
GALVALUME®/GALV
SMP COLOR
SR-153
c
2
Specify
Angle
45°
Color
18 ±
Specify angle when ordering.
AR-27
STURDI-LINE ACCESSORY PRICING
K STYLE GUTTER
Left End Cap
Right End Cap
INSIDE BOX MITER
OUTSIDE BOX MITER
HIDDEN HANGER WITH SCREW
3” X 3” DROP OUTLET
ITEM
NUMBER
505K2049^
5” K Style Gutter X 20’-4” Long
29 GA SMP
506K2049^
6” K Style Gutter X 20’-4” Long
29 GA SMP
505KLEC9^
5” Left Hand End Cap
29 GA SMP
506KLEC9^
6” Left Hand End Cap
29 GA SMP
505KREC9^
5” Right Hand End Cap
29 GA SMP
506KREC9^
6” Right Hand End Cap
29 GA SMP
ITEM
NUMBER
DESCRIPTION
PRICE PER EACH
WT. /
EA.
505IMWAL
5” Inside Box Miter White Only
Aluminum
3.0#
506IMWAL
6” Inside Box Miter White Only
Aluminum
4.0#
ITEM
NUMBER
DESCRIPTION
WT. /
EA.
505OMWALL
5” Outside Box Miter - White Only
Aluminum
3.0#
506OMWALL
6” Outside Box Miter - White Only
Aluminum
4.0#
ITEM
NUMBER
DESCRIPTION
44A5251
5” Hanger with screw
44A6251
6” Hanger with screw
ITEM
NUMBER
50OVOW
Works with either 5” or 6” gutter.
AR-28
DESCRIPTION
DESCRIPTION
3” X 3” Drop Outlet
PRICE PER EACH
PRICE PER EACH
PRICE PER EACH
WT. /
EA.
1.0#
PRICE PER EACH
STURDI-LINE ACCESSORY PRICING
ITEM
NUMBER
DOWNSPOUT PIPE
3” X 3” Downspout Pipe X 10’-0”
29 GA SMP
50DS1009^
ITEM
NUMBER
ELBOW
3” X 3” Type A 75° Elbow
29 GA SMP
1.0#
50DSELB9^
3” X 3” Type B 75° Elbow
29 GA SMP
1.0#
&LAT3HEET3KID5PTOg^
,4,3KID
&OR0ROTECTIVE-ASKING&ILM
!DDPER3HEET
ITEM
NUMBER
WT. /
EA.
DESCRIPTION
50PBP9^
FLAT TRIM SHEETS
WT. /
EA.
DESCRIPTION
ITEM
NUMBER
3” x 3” Pipe Band 29 GA SMP
FINISH
PRICE PER EACH
7.75#
50DSELA9^
3” X 3” PIPE BAND
(ASTM A792, GRADE 50 MATERIAL)
WT. /
EA.
DESCRIPTION
PRICE PER EACH
PRICE PER EACH
0.24#
LENGTH
GAUGE
WIDTH
WT./
EA.
50FLATM
Acrylic-Coated
Galvalume
10’-0
26
413⁄8”
25.7#
50FLATW
Poly Polar White
10’-0
26
413⁄8”
26.3#
50FLAT^
SMP Colors
10’-0
26
413⁄8”
26.4#
50FLAT^
KYNAR Colors
10’-0
26
413⁄8”
26.4#
50FLATM29
Acrylic-Coated
Galvalume
10’-0
29
407⁄8”
20.9#
50FLATW29
Poly Polar White
10’-0
29
407⁄8”
21.4#
50FLAT^29
SMP Colors
10’-0
29
407⁄8”
21.4#
1-10
PRICE PER EACH
11-50
51+
AR-29
STURDI-LINE ACCESSORY PRICING
SPECIAL TRIM PRICING
The following formula is used to calculate the Price per Foot of special trim:
Girth of Material x Price per Inch of Girth + Price per Number of Breaks
Price per Inch of Girth:
29 gauge (all standard colors/finishes) ~
26 gauge (all standard colors/finishes) ~
Price per Break (hem equals two breaks): $0.10
1.
2.
3.
4.
5.
6.
7.
All short lengths will be charged as a 5’-0” minimum length.
A $15.00 set-up charge will be added for tapered trim - No Exceptions. Drawings must be furnished by customer and be “shop ready”.
Prices do not include standard packaging. Add appropriate packaging charges.
Customer sketch of special trim must be in Whirlwind’s possession before order can be processed.
Specify which side of trim has the color finish.
If more than one special trim is required number them SF1, SF2, SF3, etc.
Special trim parts such as corner boxes, peak boxes, etc. will be priced at $47.50 each (all gauges).
TRIM PACKAGING
1.
2.
3.
AR-30
Standard Kraft paper wrap ~ $0.52 per lineal foot ($5.20 minimum).
Heavy cardboard box with angles ~ $25.00.
LTL - Cardboard box with wooden blocks and metal bands ~ $4.50 per lineal foot ($45.00 minimum).
STURDI-LINE ACCESSORY PRICING
T2200 SIDE RAIL FOR SLIDING DOOR
T2201 BOTTOM RAIL FOR SLIDING DOOR
T2244 BOTTOM RAIL WITHOUT GUIDE
FOR SLIDING DOOR
T2216 H-RAIL COUPLE FOR SLIDING DOOR
T1600WB BOTTOM RAIL with GUIDE
TBSG BOTTOM STAY GUIDE
ITEM
NUMBER
DESCRIPTION
WT./
EA.
44T220010W
10’ - White
0.73#
44T220012W
12’ - White
0.73#
44T220014W
14’ - White
0.73#
44T220016W
16’ - White
0.73#
ITEM
NUMBER
DESCRIPTION
WT./
EA.
44T220110W
10’ - White
0.60#
44T220112W
12’ - White
0.60#
44T220114W
14’ - White
0.60#
44T220116W
16’ - White
0.60#
ITEM
NUMBER
DESCRIPTION
WT./
EA.
44T224410W
10’ - White
1.00#
44T224412W
12’ - White
1.00#
44T224414W
14’ - White
1.00#
44T224416W
16’ - White
1.00#
ITEM
NUMBER
DESCRIPTION
WT./
EA.
44T221610W
10’ - White
0.88#
44T221612W
12’ - White
0.88#
44T221614W
14’ - White
0.88#
44T221616W
16’ - White
0.88#
ITEM
NUMBER
DESCRIPTION
WT./
EA
44T1600WB08
8'-0 - WHITE
8.0
44T1600WB10
10'-0 - WHITE
10.0
44T1600WB12
12'-0 - WHITE
12.0
44T1600WB14
14'-0 - WHITE
14.0
44T1600WB16
16'-0 - WHITE
16.0
ITEM
NUMBER
DESCRIPTION
44TBSG06
6’ - Includes 2 Brackets
44TBSG10
10’- Includes 3 Brackets
PRICE PER UNIT
WHITE
PRICE PER UNIT
WHITE
PRICE PER UNIT
WHITE
PRICE PER UNIT
WHITE
PRICE PER UNIT
ZINC
PRICE PER UNIT
GALVANIZED
2 pieces per carton.
AR-31
STURDI-LINE ACCESSORY PRICING
TSTB 16GA SQUARE TRACK W/ TOP MOUNT
BRACKET FOR COVER
TSTC 16GA SQUARE TRACK W/ PREMOUNTED TOP MOUNT WHITE COVER
TTMF TOP MOUNT FLASHING BRACKET
ITEM
NUMBER
44TSTB10
10’ - Galvanized
44TSTB12
12’ - Galvanized
44TSTB14
14’ - Galvanized
44TSTB16
16’ - Galvanized
44TSTB20
20’ - Galvanized
ITEM
NUMBER
44TSTC08
8’
44TSTC10
10’
44TSTC12
12’
44TSTC14
14’
44TSTC16
16’
44TSTC20
20’
ITEM
NUMBER
44BC3131
T3391 3-1/2” BIG VERTICAL SIDE RAIL
T3394 3-1/2” BIG BOTTOM RAIL
AR-32
DESCRIPTION
PRICE PER UNIT
DESCRIPTION
PRICE PER UNIT
DESCRIPTION
PRICE PER EACH
GALVALNIZED
Flashing brackets may be nailed over track to
provide support for compatible flashing. Used with
16GA square track, but may be used separately.
ITEM
NUMBER
DESCRIPTION
WT/
EA
44T339108W
8’-0 - WHITE
11.7
44T339110W
10’-0 - WHITE
14.6
44T339112W
12’-0 - WHITE
17.5
44T339114W
14’-0 - WHITE
20.5
44T339116W
16’-0 - WHITE
23.4
44T339118W
18’-0 - WHITE
26.3
44T339120W
20’-0 - WHITE
29.3
ITEM NUMBER
DESCRIPTION
WT/
EA
44T339408W
8’-0 - WHITE
16.0
44T339410W
10’-0 - WHITE
20.0
44T339412W
12’-0 - WHITE
24.0
44T339414W
14’-0 - WHITE
28.0
44T339416W
16’-0 - WHITE
32.0
44T339418W
18’-0 - WHITE
36.0
44T339420W
20’-0 - WHITE
40.0
PRICE PER UNIT
WHITE
PRICE PER UNIT
WHITE
STURDI-LINE ACCESSORY PRICING
T3396 3-1/2” BIG H-RAIL - DOUBLE COUPLE
for SPLIT DOORS
TGB BOX GIRTS
ITEM
NUMBER
DESCRIPTION
WT/
EA
44T339608W
8’-0 - WHITE
14.1
44T339610W
10’-0 - WHITE
17.6
44T339612W
12’-0 - WHITE
21.1
44T339614W
14’-0 - WHITE
24.6
44T339616W
16’-0 - WHITE
28.2
44T339618W
18’-0 - WHITE
31.7
44T339620W
20’-0 - WHITE
35.2
ITEM
NUMBER
DESCRIPTION
44TGB08
11⁄2” X 31⁄2” X 8’-0” Steel Box Girt
44TGB10
11⁄2” X 31⁄2” X 10’-0” Steel Box Girt
44TGB12
11⁄2” X 31⁄2” X 12’-0” Steel Box Girt
44TGB14
11⁄2” X 31⁄2” X 14’-0” Steel Box Girt
44TGB16
11⁄2” X 31⁄2” X 16’-0” Steel Box Girt
44TGB18
11⁄2” X 31⁄2” X 18’-0” Steel Box Girt
44TGB20
11⁄2” X 31⁄2” X 20’-0” Steel Box Girt
PRICE PER UNIT
WHITE
PRICE / LFT.
Made from 20 gauge galvanized steel (11⁄2” X 31⁄2” lock seamtube). Can be used in place of wood horizontal girts to eliminate warping and
cracking of door panels.
TGSR HEAVY DUTY STAY ROLLER
TDS HEAVY DUTY DOOR STOP
ITEM
NUMBER
DESCRIPTION
44TGSR
Extra-heavy duty stay roller, fabricated from 3⁄16” zinc
plated steel, adjusts from 1” to 33⁄4” for a wide range
of door widths. Non-marking plastic wheel mounted
on sturdy 1⁄2” bolt. Offset slots allow full contact with
door.
ITEM
NUMBER
DESCRIPTION
44TDS
ADJUSTABLE DOOR GUIDE/STOP 545
ITEM
NUMBER
44DGS545
PRICE PER EACH
PRICE PER EACH
For 2” doors, made from rugged zinc-plated steel
and ribbed to increase strength. Holes accept 5⁄15”
bolts or lag screws (not included).
DESCRIPTION
PRICE PER EACH
Ideal for corrugated metal-clad doors, this
adjustable guide may be expanded in width for
doors from 21⁄2” to 6” thick. Curved surface gives
natural lead-in. The door guide also mounts
sidewise for use as a stop. Easy to install, comes in
powder-coated white.
AR-33
STURDI-LINE ACCESSORY PRICING
TJMS JAMB MOUNT STOP
ITEM
NUMBER
44TJMS
TCDG CENTER GUIDE/STOP
TTP9 SQUARE TRACK TROLLEY HANGERS
DESCRIPTION
44TCDG
Installs on 6 X 6 post or in concrete, in the center of
split doors or a large single door.
ITEM
NUMBER
DESCRIPTION
ITEM
NUMBER
44TJL
TCDL CENTER DOOR LATCH
ITEM
NUMBER
44TCDL
TCS CHAIN SNUGGER
ITEM
NUMBER
44TCS
AR-34
PRICE PER EACH
2” X 9” galvanized steel unit extends from jamb to
stop and hold doors in open or closed position.
ITEM
NUMBER
44TTP9
TJL JAMB LATCH
DESCRIPTION
PRICE PER EACH
PRICE PER UNIT
GALVANIZED
9 1/2” Vertical adjustable bolt, trolly hanger for 400
lb. door (ball bearing).
DESCRIPTION
PRICE PER EACH
Jamb latch is used on inside of jamb to secure
sliding doors. The strike plate is lumber-fit for easy
installation.
DESCRIPTION
PRICE PER EACH
Easily and tightly secures bi-parting doors with
cam-action latch.
DESCRIPTION
Ring and hook simply secure a chain to desired
length for holding bi-parting sliding door leaves
together.
PRICE PER EACH
STURDI-LINE ACCESSORY PRICING
TWDP WHITE DOOR PULL
HORIZONTAL SLIDE STORM WINDOWS
ITEM
NUMBER
DESCRIPTION
44TWDP
11⁄4” wide, 6 -5 - 8” overall length. Retains 13⁄4” deep
clearance to allow use with gloved hand.
ITEM
NUMBER
DESCRIPTION
PRICE PER EACH
WT./
EA.
45WAJ11015N
46-1/2” x 21” 110 Series Ranch Interior
Storm Window - Horizontal Slide - White
(Nailing Fin No Screen. Non-Thermal Single
Glazed) (AJ 11015N)
16.0#
45WAJ11115N
46-1/2” x 21” 110 Series Ranch Interior
Storm Window - Horizontal Slide - Brown
(Nailing Fin No Screen. Non-Thermal Single
Glazed) (AJ 11115N)
16.0#
45WAJ21015
46-1/2” x 21” 210 Series Ranch Storm
Window - Horizontal Slide - White
(J-Channel with Screen. Non-Thermal
Single Glazed) (AJ 21015)
16.0#
45WAJ21115
46-1/2” x 21” 210 Series Ranch Storm
Window - Horizontal Slide - Brown
(J-Channel with Screen. Non-Thermal
Single Glazed) (AJ 21115)
16.0#
45WAJ21020
4030 210 Series Ranch Storm Window Horizontal Slide - White (J-Channel with
Screen. Non-Thermal Single Glazed)
(AJ 21020)
24.0#
45WAJ21120
4030 210 Series Ranch Storm Window Horizontal Slide - Brown (J-Channel with
Screen. Non-Thermal Single Glazed)
(AJ 21120)
24.0#
45WAJ21007
3030 210 Series Ranch Storm Window Horizontal Slide - White (J-Channel with
Screen. Non-Thermal Single Glazed)
(AJ21007)
18.0#
45WAJ21107
3030 210 Series Ranch Storm Window Horizontal Slide - White (J-Channel with
Screen. Non-Thermal Single Glazed)
(AJ21107)
18.0#
PRICE EACH
AR-35
STURDI-LINE ACCESSORY PRICING
COMMERCIAL DOORS - 3100 SERIES
ITEM
NUMBER
DESCRIPTION
WT./
UNIT
44AJ31029
3068 3100 Series Standard Door Unit Brown (Leaf, Frame, Weather Strip, Hinges
& Sill) (AJ 31029)
53.0#
44AJ31057
3068 3100 Series Standard Door Unit White (Leaf, Frame, Weather Strip, Hinges
& Sill) (AJ 31057)
53.0#
44AJ31067
3068 3100 Series Insulated 9-Lite Door
Unit - White (Leaf, Frame, Weather Strip,
Hinges & Sill) (AJ 31067)
63.0#
PRICE PER UNIT
3068
Standard
9-Lite
Door Features: Embossed steel panel, aluminum jamb and 4-way universal swing. Rough opening is 38 1⁄16” X 81 7⁄8 .”
COMMERCIAL DOORS - 5100 SERIES
ITEM
NUMBER
DESCRIPTION
WT./
UNIT
44AJ51001
3068 5100 Series Standard Door Unit White (Leaf, Frame, Weather Strip, Hinges
& Sill) (AJ 51001)
95.0#
44AJ51003
3068 5100 Series Insulated 9-Lite Door
Unit - White (Leaf, Frame, Weather Strip,
Hinges & Sill) (AJ 51003)
105.0#
44AJ51291
3068 5100 Series Standard Door Unit - Clay
(Leaf, Frame, Weather Strip, Hinges & Sill)
(AJ 51291)
95.0#
44AJ51292
3068 5100 Series Insulated 9-Lite Door Unit
- Clay (Leaf, Frame, Weather Strip, Hinges
& Sill) (AJ 51292)
105.0#
PRICE PER UNIT
3068
Standard
9-Lite
Door Features: 24 ga. smooth steel panel, 16 ga. painted steel jambs, stainless steel fixed pin hinges and 4-way
universal swing. Rough opening is 40 5⁄16” X 81 1⁄8 .”
COMMERCIAL DOORS - SERIES 20
ITEM
NUMBER
DESCRIPTION
3068
4420PWST3068S
3068 Standard Commercial Door - Polar White
Standard
Door Features: 24 ga. smooth steel panel, 16 ga. painted steel jambs, stainless steel fixed pin hinges, 4-way
universal swing. Rough opening is 40 3⁄8” X 81 ¾”
AR-36
PRICE PER UNIT
STURDI-LINE ACCESSORY PRICING
COMMERCIAL DOORS - SERIES 66
ITEM
NUMBER
4466MFST3068
DUTCH DOOR
ITEM
NUMBER
47DD-MDL
DESCRIPTION
PRICE PER UNIT
3068 Insulated Economy Utility Door
Mill Finish White
DESCRIPTION
PRICE PER EACH
4’ X 7’ Assembled Dutch Door With Frame
Special Order.
TOUCH-UP PAINT
LIGHT TRANSMITTING PANELS - POLYCARB
ITEM
NUMBER
DESCRIPTION
42TU9^
Akzo Nobel Matching Color Panel Touch-Up Paint
(Not available for secondary colors or backer) 9 oz. Spray
can.
ITEM
NUMBER
DESCRIPTION
PRICE PER EACH
WT. /
EA.
42SLSR12PC
Sturdi-Rib
36” Coverage X 12’-0 long, Clear
9.5#
42SLSP12PC
Sturdi-Span
36” Coverage X 12’-0 long, Clear
9.5#
42SLSPNL12PC
Sturdi-Panel
36” Coverage X 12’-0 long, Clear
9.0#
42SLSD12PC
Sturdi-Drain
36” Coverage X 12’-0 long, Clear
9.0#
PRICE PER EACH
AR-37
STURDI-LINE ACCESSORY PRICING
LIGHT TRANSMITTING PANELS
ITEM
NUMBER
DESCRIPTION
WT. /
EA.
PRICE PER EACH
Sturdi-Rib
42SLSR08
36” Coverage x 8’-0 long,
Smooth Finish - White
7.6#
42SLSR10
36” Coverage x 10’-0 long,
Smooth Finish
9.5#
42SLSR12
36” Coverage x 12’-0 long,
Smooth Finish
11.4#
Sturdi-Span
42SLSP08
36” Coverage x 8’-0 long,
Smooth Finish - White
7.6#
42SLSP10
36” Coverage x 10’-0 long,
Smooth Finish - White
9.5#
42SLSP12
36” Coverage x 12’-0 long,
Smooth Finish - White
11.4#
Sturdi-Panel
42SLSPNL12
36” Coverage x 12’-0 long,
Smooth Finish - White
11.4#
Sturdi-Drain
42SLSD12
36” Coverage x 12’-0 long,
Smooth Finish - White
11.8#
All panels are translucent white fiberglass weighing a nominal 5 oz. per sq. ft., approx. 50% light transmission.
Motor Freight Crating $6.00 per foot. Maximum 100 per bundle.
ITEM
NUMBER
DESCRIPTION
42SLRL106
24” Wide x 10’-6 long, smooth finish,
White Fiberglass
42SLRL106PC
24” Wide x 10’-6 long, smooth finish,
Clear Carbonate
WT. /
EA.
7.0#
b
PEAKLITE COMBINATION RIDGECAP &
SKYLIGHT
Motor Freight Crating $6.00 per foot. Maximum 100 per bundle.
AR-38
7.0#
PRICE PER EACH
STURDI-LINE ACCESSORY PRICING
16” CENTER VENTED SOFFIT
ITEM
NUMBER
LENGTH
WT. /
EA.
Soffit Panel - Steel
144”
12.2#
Soffit Panel - Aluminum
144”
DESCRIPTION
PRICE PER EACH
144” Long - 16” Wide
Coverage
51S1449^
47PANELS-MDL
11.75” Long - 16” Wide
Coverage
51S129^
47PANELS-MDL
Precut Soffit Panel - Steel
11.75”
Precut Soffit Panel Aluminum
11.75
1.03#
23.75” Long - 16” Wide
Coverage
51S249^
47PANELS-MDL
Precut Soffit Panel - Steel
23.75”
Precut Soffit Panel Aluminum
23.75”
2.1#
Solid Soffit Available In Steel Or Aluminum In The Same Lengths As Above.
RIDGE VENTS
ITEM
NUMBER
DESCRIPTION
WT. /
EA.
PRICE PER EACH
RV100
45RV1009^
Regional to Minnesota
10’ Economy RV100
Ridge Vent
20.0#
Endcaps and splicers included. Provides 120 square inches of free area. Stocked in: Polar White & Free White.
RV35F
45RV35F9^
Regional to Minnesota
10’ Deluxe RV35F Ridge Vent
30.0#
Endcaps and splicers included. Provides 360 square inches of free area. Clear fiberglass rain diverter provides natural light. Stocked in: Polar
White, Koko Brown, Evergreen, Steel Gray, Burnished Slate, Surfsand, Free White, Light Stone, Ash Gray & Burgundy.
RV35F
(w/ 24” flange)
45RV35F249^
Regional to Minnesota
10’ Deluxe RV35F Ridge Vent
w/ 24” Flange
35.0#
Stocked in: Polar White & Free White.
AR-39
AG/RES TRIM PRICING
CONTINUOUS THROAT GRAVITY RIDGE
VENTILATORS
ITEM
NUMBER
RV400
RV400D
45RV400^
45RV400D^
WT./
EA.
DESCRIPTION
9” Throat x 4’-0 Long, 26 GA,
w
⁄O damper
30#
9” Throat x 4’-0 Long, 26 GA,
⁄ damper
33#
w
PRICE EACH
GALVALUME®
SMP COLOR
All ventilators have bird screen. Pricing shown is for ventilators with flat skirts. All ventilators will
conform to roof slopes up to 6:12.
CONTINUOUS THROAT GRAVITY RIDGE
VENTILATORS
ITEM
NUMBER
45RV900^
RUBBER PIPE FLASHING
PIPE
RANGE
WT. /
EA.
#1
¼” - 2” O.D.
0.2#
42RPF02
#2
1¼” - 3” O.D.
0.3#
42RFP03
#3
¼” - 4” O.D.
0.5#
#3 (High Temperature)
¼” - 4” O.D.
0.5#
42RPF04
#4
3” - 6” O.D.
0.8#
42RPF05
#5
4” - 7” O.D.
1.0#
#5 (High Temperature)
4” - 7” O.D.
1.0#
42RPF06
#6
5” - 9” O.D.
1.2#
42RPF07
#7
6” - 11” O.D.
1.6#
42RPF08
#8
7” - 13” O.D.
2.6#
#8 (High Temperature)
7” - 13” O.D.
2.6#
42RPF09
#9
10” - 20” O.D.
3.9#
42RPF10
#10
12” - 26” O.D.
7.8#
42RPF801
801 Retrofit
¾” - 2¾” O.D.
0.3#
42RPF802
802 Retrofit
2” - 7¼” O.D.
1.0#
42RPF803
803 Retrofit
3¼” -10” O.D.
1.6#
42RPF08HT
2%42/&)4$%+4)4%
SIZE
Flexible aluminum base, black, EPDM rubber pipe flashing. Adapts to any panel profile. Screws and caulking are not
included. Temperature range: -65° F to 250° F. Silicone, high-temperature types are available. Please inquire.
AR-40
PRICE PER CARTON
78#
42RPF01
42RPF05HT
§
9” Throat x 10’-0” Long,
26 GA Fixed Open
ITEM
NUMBER
42RPF03HT
$%+4)4%§
WT./
EA.
DESCRIPTION
PRICE EACH
AG/RES TRIM PRICING
ITEM
NUMBER
POLAR BLOX
44USGPC
ITEM
NUMBER
TAPE SEAL
DESCRIPTION
PRICE PER EACH
Universal Snow Guard - Clear
WT. /
EA.
DESCRIPTION
PRICE PER EACH
Gray Butyl Flat Tape on Waterproof Release
Paper
Flat
42RS038
Case of 3⁄8” x 3⁄32” (24 rolls x 50’ long)
38.0#
42RS038
Roll of 3⁄8” x 3⁄32” x 50’ long
1.5#
42RS100
Case of 1” x 3⁄32” (10 rolls x 50’ long)
33.0#
42RS100
Roll of 1” x 3⁄32” x 50’ long
3.3#
Gray Double Bead Sealant on Waterproof Release
Paper
Double Bead
42RS078
Case of 7⁄8” x 3⁄16” (24 rolls x 25’ long)
15.0#
42RS078
Roll of 7⁄8” x 3⁄16” x 25’ long
0.7#
Gray Triple Bead Sealant on Waterproof Release
Paper
Triple Bead
TUBE CAULKING
10.3 OZ. CARTRIDGE
42RS212
Case of 2½” x 3⁄16” (6 rolls x 20’ long)
21.0#
42RS212
Roll of 2½” x 3⁄16” x 20’ long
3.5#
ITEM
NUMBER
DESCRIPTION
TUBE
SIZE
WT./
EA
PRICE EACH
Schnee-Morehead 7108
Permathane Polyurethane
(available in White only)
42TCCLR
Case of 30 cartridges
10.3 oz.
35.0#
42TCCLR
Single cartridges
10.3 oz.
1.2#
Schnee-Morehead5522
Acryl-R Acrylic
(stocked in Clear only)
42TCW
Case of 30 cartridges
10.3 oz.
35.0#
42TCW
Single cartridges
10.3 oz.
1.2#
AR-41
AG/RES TRIM PRICING
STURDI-RIB CLOSURE STRIP
EACH PIECE 3’-0”
ITEM
NUMBER
DESCRIPTION
WT. /
100
PRICE EACH
Cross-Linked Gray Polyethylene
Side w/ Adhesive
Side w/ Adhesive
STURDI-SPAN CLOSURE STRIP
EACH PIECE 3’-0”
42CS31R
CS31R Closure Strip (Inside)
6.9#
42CS30R
CS30R Closure Strip (Outside)
6.9#
42CS31RA
CS31R Closure Strip (Inside) w/ adhesive
6.9#
42CS30RA
CS30R Closure Strip (Outside) w/ adhesive
6.9#
ITEM
NUMBER
DESCRIPTION
WT./
100
PRICE EACH
Cross-Linked Gray Polyethylene
42CS33R
CS33R Closure Strip (Inside)
6.9#
42CS32R
CS32R Closure Strip (Outside)
6.9#
42CS33RA
CS33R Closure Strip (Inside) w/ adhesive
6.9#
42CS32RA
CS32R Closure Strip (Outside) w/ adhesive
6.9#
Side w/ Adhesive
Side w/ Adhesive
STURDI-PANEL CLOSURE STRIP
EACH PIECE 3’-0”
ITEM
NUMBER
DESCRIPTION
WT. /
100
Cross-linked Gray Polyethylene
Side w/ Adhesive
42CS39R
CS39R Closure Strip (Inside)
6.9#
42CS38R
CS38R Closure Strip (Outside)
6.9#
42CS39RA
CS39RA Closure Strip (Inside) w/ adhesive
6.9#
42CS38RA
CS38RA Closure Strip (Outside) w/ adhesive
6.9#
Side w/ Adhesive
AR-42
PRICE PER UNIT
AG/RES TRIM PRICING
STURDI-DRAIN CLOSURE STRIP
EACH PIECE 3’-0”
ITEM
NUMBER
DESCRIPTION
WT. /
100
PRICE PER UNIT
Cross-Linked Gray Polyethylene
Side w/ Adhesive
42CS40R
CS40R Closure Strip (Inside & Outside)
6.9#
42CS41RA
CS41RA Closure Strip (Inside) w/ adhesive
6.9#
42CS40RA
CS40RA Closure Strip (Outside) w/ adhesive
6.9#
Side w/ Adhesive
AST HI-ACRYLIC CLOSURE SEALANT TAPE
WATER-BASED, ACRYLIC-MODIFIED ASPHALT IMPREGNATED, NONDRYING, NON-EXTRUDING, SELF-EXPANDING SEALANT TAPE.
¼” X 1” EXPANDS TO 1” X 1”.
3
⁄8” X 1¼” EXPANDS TO 1½” X 1¼”
ITEM
NUMBER
DESCRIPTION
WT. /
EA.
42HAST100
Case of ¼” x 1” (26 rolls x 19.68’ long)
37.0#
42HAST100
Roll of ¼” x 1” x 19.68’ long
1.4#
42HAST112
Case of 3⁄8” x 1¼” (20 Rolls x 13.12’ long
34.0#
42HAST112
Roll of 3⁄8” x 1¼” x 13.12’ long
1.7#
PRICE PER EACH
This tape is an impregnated, self-expanding, open-cell foam that when compressed properly seals against moisture,
vapor, air, dust, and sound. The tape expands to seal all profiles of metal panels and creates an uninterrupted seal
which is not subject to skips or runs during application.
VENTILATING CLOSURE STRIP
ITEM
NUMBER
DESCRIPTION
WT. /
EA.
42CS28RVC
Super Span x 3’.0” long
.1#
42CS30RVC
Sturdi-Rib x 3’.0” long
.1#
42CS32RVC
Sturdi-Span x 3’.0” long
.1#
PRICE EACH
Mode from Cobra ® vent material. For use with Sturdi-Rib, Studi-Span, and Super Span. Use with Universal or
Residential Ridge Cap (sold separately). Has adhesive in rib to hold position during installation.
VENTED CLOSURE
ITEM
NUMBER
42UV3104
DESCRIPTION
PRICE EACH
Uni-Vent III - 1” X 3” X 10’-4”
Case quantity: 10
AR-43
AG/RES TRIM PRICING
ITEM
NUMBER
CUPOLA
DESCRIPTION
WT. /
EA.
PRICE PER EACH
With Louvered Sides & Premium Flashing
- 29 GA
47CUPOLA-MDL
24”
42.0#
47CUPOLA-MDL
36”
84.0#
47CUPOLA-MDL
48”
147.0#
With Windows & Premium Flashing
- 29 GA
47CUPOLA-MDL
26”
33.0#
47CUPOLA-MDL
36”
66.0#
47CUPOLA-MDL
48”
122.0#
(Knock down unit unassembled)
ITEM
NUMBER
30” ALUMINUM WEATHER VANE
45WV30_
DESCRIPTION
30” Aluminum Weather Vane
WT. /
EA.
PRICE PER EACH
5.0#
STANDARD DESIGNS AVAILABLE:
ANTIQUE AUTO
COW
HORSE & BUGGY
ROOSTER
BUCK
EAGLE
PIG
BOAT
DUCK
PHEASANT
TRACTOR HORSE
* Assembly Required
ITEM
NUMBER
46” ALUMINUM WEATHER VANE
45VW46_
STANDARD DESIGNS AVAILABLE:
EAGLE
ROOSTER
SAILBOAT
* Assembly Required
AR-44
DESCRIPTION
46” Aluminum Weather Vane w/ Antique
Finish - Black
WT. /
EA.
13.0#
PRICE PER EACH
AG/RES TRIM PRICING
MATCHING FINISH HWH
WOOD FASTENER
With Sealing Washer
MATCHING FINISH LONG-LIFE HWH
WOOD FASTENER
#10-16 Wood Ultimate™ long-life wood screw w/
sealing washer.
STAINLESS STEEL WOOD FASTENER
ITEM
NUMBER
SIZE
HEAD
AF
WEIGHT
PER M.
41WM10100^
#10
1”
¼”
8.7#
41WM10112^
#10
1½”
¼”
10.8#
41WM10200^
#10
2”
¼”
13.1#
41WM10212^
#10
2½”
¼”
14.9#
41WM10300^
#10
3”
¼”
17.7#
LENGTH
HEAD
AF
WEIGHT
PER M.
LENGTH
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41UW100^
#10
1”
5
⁄16”
14.2#
41UW112^
#10
1½”
5
⁄16”
16.3#
41UW200^
#10
2”
5
⁄16”
18.6#
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
These fasteners will punch through 26 gauge sheet metal and fasten into wood members. All
length and color combinations are special order and could be subject to limited availability.
Please inquire. Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
LENGTH
47FAS-MDL
#10
11⁄2”
ITEM
NUMBER
SIZE
LENGTH
41WM100^TX
#10
41WM112^TX
41WM200^TX
HEAD
AF
1
WEIGHT
PER M.
⁄4”
10.8#
HEAD
AF
WEIGHT
PER M.
1”
ECLIPSE
8.7#
#10
1½”
ECLIPSE
10.8#
#10
2”
ECLIPSE
13.1#
PRICE PER 1000
PLATED
SMP COLOR
With Sealing Washer
MATCHING FINISH CUPPED TRUSS
HEAD WOOD FASTENER
#10-11 Eclipse Woodbinder w/ Sealing Washer
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
Fasteners sold in quantities of 250 only.
AR-45
AG/RES TRIM PRICING
PLATED FINISH SELF-TAPPING
QUADREX PANCAKE FASTENER
#10-12 x 1” Pancake Quadrex
MATCHING FINISH CUPPED TRUSS
HEAD SELF-DRILLING FASTENER
ITEM
NUMBER
SIZE
41PHT100ZTX
#10
HEAD
AF
WEIGHT
PER M.
1”
QUAD
10.0#
LENGTH
HEAD
AF
WEIGHT
PER M.
1¼”
ECLIPSE
18.6#
LENGTH
HEAD
AF
WEIGHT
PER M.
⁄8”
ECLIPSE
16.0#
HEAD
AF
WEIGHT
PER M.
LENGTH
PRICE PER 1000
1K-10K
OVER 10K
PLATED
PLATED
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD114^TX
#12
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
6-LOBE
#12-14 x 1¼” Cupped Truss Head Driller w/ Sealing Washer
MATCHING FINISH CUPPED
TRUSS HEAD LAP-TEK
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD078^TX
¼
7
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
6-LOBE
¼ - 14 x 7⁄8 Cupped Truss Head Laptek w/ Sealing
Washer
MATCHING FINISH HWH
SELF-DRILLING FASTENER
12-14 Maxiseal TEKS® 2 Driller w/ Sealing Washer.
MATCHING FINISH LAP-TEK
HWH FASTENER
1
/4 -14 x 7/5 Maxiseal TEKS® Lap-TEK w/ Sealing Washer.
AR-46
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
LENGTH
41SD100_
#12
1”
5
41SD112_
#12
11⁄2”
5
⁄16”
PRICE PER 1000
PLATED
SMP COLOR
16.1#
⁄16”
19.2#
HEAD
AF
WEIGHT
PER M.
Fasteners sold in quantities of 250 only.
ITEM
NUMBER
SIZE
41SD078^
¼”
Fasteners sold in quantities of 250 only.
LENGTH
7
⁄8”
5
⁄16”
16.0#
PRICE PER 1000
PLATED
SMP COLOR
AG/RES TRIM PRICING
SELF-DRILLING FASTENER
ITEM
NUMBER
SIZE
LENGTH
41SD100Z12
#12
1”
HEAD
AF
5
WEIGHT
PER M.
⁄16”
10.9#
HEAD
AF
WEIGHT
PER M.
PRICE PER 1000
PLATED
SMP COLOR
Fasteners sold in quantities of 250 only.
SHARP POINT STITCH SCREW
PLATED FINISH THREADED MASONRY
FASTENER
1
⁄4” X 11⁄4” HWH Tapcon®
POP RIVET
ITEM
NUMBER
SIZE
47FAS-MDL
#12
ITEM
NUMBER
SIZE
41CM114^
¼”
LENGTH
3
5
⁄4”
LENGTH
1¼”
⁄16”
10.8#
HEAD
AF
WEIGHT
PER M.
5
⁄16”
SLOTTED
PRICE PER 1000
PLATED
SMP COLOR
PRICE PER 1000
1K-10K
OVER 10K
PLATED SMP COLOR
PLATED
SMP COLOR
10.0#
Standard finish is Blue Climaseal®. Painted fasteners are special order. Fasteners sold in
quantities of 250 only.
ITEM
NUMBER
GRIP RANGE
GRIP
RANGE
WEIGHT
PER M.
41PR^
.063” - .125”
1
⁄8” DIA.
2.8#
41PRLGSC-SO
.063” - .125”
1
⁄8” DIA.
3.3#
PRICE PER 1000
ALL COLORS
Body and mandrel are stainless steel. Fasteners sold in quantities of 250 only.
DOUBLE HOT-DIP GALVANIZED FLAT
RUBBER WASHER NAIL
ITEM
NUMBER
41NRW112^
DOUBLE HOT-DIP GALVANIZED “FAT
HEAD” GRAY SILICONE WASHER NAIL
ITEM
NUMBER
41NSW212G
DESCRIPTION
PRICE PER 1000
SMP COLOR
11⁄2” Long - Flat Rubber Washer Nails
5 lb. Box.
DESCRIPTION
PRICE PER 1000
GALVANIZED
21⁄2” Long - Gray Silicone Washer Nails
5 lb. Box.
AR-47
AG/RES TRIM PRICING
PANEL HEMMING TOOL
ITEM
NUMBER
44WSHT
PANEL TURN-UP TOOL
DESCRIPTION
45BLADE-_-90
DESCRIPTION
Swenson Model 42 Shear Base
(Base Only - No Blades)
90° Straight Cut Blade Set
(Specify Panel Profile)
Available for: Sturdi-Rib, Sturdi-Span, Sturdi-Drain & Sturdi-Panel.
45BLADE-_-412
4:12 Pitch Cut Blade Set
(Specify Panel Profile)
Available for: Sturdi-Rib, Sturdi-Span, Sturdi-Drain & Sturdi-Panel.
AR-48
PRICE PER EACH
For Turning Up Panel at Ridge or Hip.
ITEM
NUMBER
45SHEAR
PRICE PER EACH
For Hemming Panel at Eave & Valley
ITEM
NUMBER
41VGTOOL11
SHEAR
DESCRIPTION
PRICE EACH
Technical
Information
Back to
Contents
TABLE OF CONTENTS
Technical Information
Product
Page
Specification Data Sheet
SPEC DATA for 24 Ga. Super Span and Super Span X.......................................................................................................... SDS-1 - SDS-2
SPEC DATA for 26 Ga. Super Span and Super Span X.......................................................................................................... SDS-3 - SDS-4
SPEC DATA for 24 Ga. Super Seam II ...................................................................................................................................... SDS-5 - SDS-6
SPEC DATA for Super Seam Plus ........................................................................................................................................... SDS-7 - SDS-8
SPEC DATA for Weather Lok 16 .............................................................................................................................................. SDS-9 - SDS-10
SPEC DATA for Weather Snap 16 ......................................................................................................................................... SDS-11 - SDS-12
SPEC DATA for 26 Ga. 7.2 Rib and 7.2N Rib......................................................................................................................... SDS-13 - SDS-14
SPEC DATA for 24 Ga. 7.2 Rib and 7.2N Rib......................................................................................................................... SDS-15 - SDS-16
Structural Technical Information
Standard Punching Patterns For Cees And Zees ...................................................................................................................................STI-1
Simple Punch Patterns For Cees And Zees .............................................................................................................................................STI-2
Optional Punch Patterns For Cees And Zees (WA/WD) ........................................................................................................................STI-3
Optional Punch Patterns For Cees And Zees (WB/WE) ........................................................................................................................STI-4
Optional Punch Patterns For Cees And Zees (WC/WF) .........................................................................................................................STI-5
Optional Punch Patterns For Cees And Zees (WH) ................................................................................................................................STI-6
Standard Connection Details For Cees And Zees .....................................................................................................................STI-7 - STI-8
Zee Installation Details ...............................................................................................................................................................................STI-9
Zee Connection Detail ~ Simple Span Flush Condition .......................................................................................................................STI-10
Zee Connection Detail ~ Simple Span By-pass Condition ...................................................................................................STI-11 - STI-12
Zee Lap Detail ~ 6” Lap .............................................................................................................................................................................STI-13
Zee Lap Detail ~ 7½” Lap ..........................................................................................................................................................................STI-14
Zee Lap Detail ~ 2’-2” Lap.........................................................................................................................................................................STI-15
Zee Lap Detail ~ 2’-3½” Lap......................................................................................................................................................................STI-16
Zee Lap Detail ~ 3’-3½” Offset Lap ..........................................................................................................................................................STI-17
Zee Lap Detail ~ 4’-3½” Lap......................................................................................................................................................................STI-18
Zee Lap Detail ~ 5’-3½” Offset Lap ..........................................................................................................................................................STI-19
Zee Lap Detail ~ 6’-3½” Offset Lap ..........................................................................................................................................................STI-20
Standard Eave Strut Punch Pattern - Single Or Double Sloped ........................................................................................................STI-21
Standard Eave Strut Punch Pattern - High Eave Single Or Double Sloped .....................................................................................STI-22
Eave Strut Punch Pattern - Universal Eave Strut .................................................................................................................................STI-23
This page intentionally left blank.
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for 24 Ga.
Super Span and Super
Span X
1. PRODUCT NAME
Whirlwind Building Components
Commercial Roof and wall System -24
Ga. Super Span X Panel
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
3. PRODUCT DESCRIPTION
Basic Use:
For roof and walls for new buildings
and retofitting existing metal buildings.
Panels are attached to the substructure with exposed fasteners.
Panels are available with a Class 90 UL
uplift rating.
The panels are produced with 1 1/4”
high major ribs at 12” centers and the
panel coverage is 36”.
Materials:
Standard panel material • 24 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar 500 colored panels are
Galvalume based material. The
exterior is given a finish coat of a 70%
minimum Kynar 500 PVF formulation,
applied over a properly treated and
primed surface. The exterior coat
is 0.75 mils minimum thickness. The
total exterior film thickness including
primer is 0.90 to 1.10 mils thick. The
interior finish is a pigmented polyester
backer or water base primer.
• The panels are also available in the
Silicone Polyester paint system.
Flashing Material • The flashing material is the same
gauge, color and finish as the panel.
Panel mastic (Optional)• Panel side laps, panel endlaps,
ridge, gable and eave sealers are
butyl-based pressure sensitive
tape mastic that is non-staining,
non-corrosive, non-volatile and
non-toxic. The tape is 100%
polyisobutylene-isoprene (butyl
rubber) meeting the performance
requirements of Federal
Specification TT-C-1796A . Service
temperature is from - 40° to + 180° F.
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7108 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Metal Construction Association
1/4” Self-drilling screw with long
life hex heads and washer or #12 x
1 1/2” self-drilling screw with long
life hex head and washer (when
insulation thickness is between 3”
and 6”).
4. TECHNICAL DATA
Physical Properties:
Paint system (Kynar-500 only)• Specular Gloss (60° Head): ASTM D
523 – 25% to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend Adhesion: ASTM D4145 - 1T no loss of adhesion
• Impact Adhesion: ASTM D 2794
– 5/8” steel ball – impact of 80 inchpounds, no loss of adhesion
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
Paint system field performance:
• Film integrity: 35 years with no
blistering, peeling or cracking
• Chalk Resistance: ASTM D 4214 –
3000 hours – weatherometer - rating
no greater than #8 .
• Color Change: ASTM D 2244 – 3000
hours – Weatherometer - no more
than 2 NBS units.
5. INSTALLATION
• Minimum roof slope to be no less
than 1/2:12.
• The panel is designed to endlap easily
without the need for notching or cinch
straps. Endlap to be 4” minimum.
Fasteners • Fasteners for connecting panels
to purlins or girts (when insulation
thickness is 3” or less) are #12 x 1
SDS-1
• The Super Span Panel can be used
in wall applications in the same
manner as a roof applications.
• In roof applications, Whirlwind
recommends that the Super Span X
Panel endlap occurs over the purlin.
There should be one run of tape
sealer in the endlap.
7. WARRANTY
10. FILING SYSTEMS
Available warranties include 25 year
base material and paint warranties up
to 35 years also are available.
Galvalume® is a registered trademark
of BIEC International, Inc.
Kynar 500™ is a registered trademark
of Elf Atochem North America, Inc.
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
6. AVAILABILITY AND COST
9. TECHNICAL SERVICES
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992.
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
12”
Bearing leg for
Super Span X
1”
4”
³⁄16”
1¼”
Side Lap Detail
35⁄16”
SUPER SPAN / SUPER SPAN X DESIGN PROPERTIES
PANEL
GAUGE
Fy
(KSI)
WEIGHT
(PSF)
26 (t=.0170")
26 (t=.0176")
24
60*
60*
50
0.83
0.86
1.09
TOP IN COMPRESSION
Ix
(In4/Ft)
0.0370
0.0380
0.0570
Ma
(Kip-In/Ft)
1.2697
1.4057
1.7500
BOTTOM IN COMPRESSION
Ix
(In4/Ft)
0.0323
0.0337
0.0467
Ma
(Kip-In/Ft)
1.6610
1.7230
1.8633
* Fy is 80-ksi reduced to 60-ksi in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members - A2.3.2.
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
Super Span / Super Span X Roof
and Wall Panel
36” Coverage
SDS-2
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for 26 Ga.
Super Span and Super
Span X
1. PRODUCT NAME
Whirlwind Building Components
Commercial Roof and Wall System 26 Ga. Super Span X Panel
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax: (832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
3. PRODUCT DESCRIPTION
Basic Use:
For roof and walls for new buildings
and retofitting existing metal buildings.
Panels are attached to the substructure with exposed fasteners.
Panels are available with a Class 90 UL
uplift rating.
The panels are produced with 1 1/4”
high major ribs at 12” centers and the
panel coverage is 36”.
Materials:
Metal Construction Association
TT-S-00230C, Type II, Class A.
Standard panel material -
Fasteners -
• 26 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Fasteners for connecting panels
to purlins or girts (when insulation
thickness is 3” or less) are #12 x 1
1/4” Self-drilling screw with Carbon
steel hex head and washer or #12
x 1 1/2” self-drilling screw with
carbon steel hex head and washer
(when insulation thickness is
between 3” and 6”).
• Ceram-A-Star 950 colored panels
are Galvalume based material.
The exterior is given a finish coat
of a High Performance Silicone
Polyester formulation, applied
over a properly treated and primed
surface. The exterior coat is 0.7
mils minimum thickness. The total
exterior film thickness including
primer is 0.9 to 1.15 mils thick.
The interior finish is a pigmented
polyester backer.
• The panels are also available in
the Kynar 500 paint system in Kelly
Green, River Teal and Deep Blue
colors.
4. TECHNICAL DATA
Physical Properties:
Paint system (Ceram-A-Star 950 only)• Specular Gloss (60° Head): ASTM D
523 – 25% to 40%
• Pencil Hardness: ASTM D 3363 - F
• Bend Adhesion: ASTM D4145 - 2T,
no loss of adhesion
Flashing Material -
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
• The flashing material is the same
gauge, color and finish as the panel.
Paint system field performance:
Panel mastic (Optional)-
• Film integrity: 30 years with no
blistering, peeling or cracking
• Panel side laps, panel endlaps,
ridge, gable and eave sealers are
butyl-based pressure sensitive
tape mastic that is non-staining,
non-corrosive, non-volatile and
non-toxic. The tape is 100%
polyisobutylene-isoprene (butyl
rubber) meeting the performance
requirements of Federal
Specification TT-C-1796A .Service
temperature is from -40° to + 180° F.
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7108 or equivalent, meeting or
exceeding the test requirements of
• Chalk Resistance: ASTM D 4214 –
2000 hours – Weatherometer - rating
no greater than #8.
• Color Change: ASTM D 2244 – 2000
hours – Weatherometer - no more
than 5 NBS units.
5. INSTALLATION
• Minimum roof slope to be no less
than 1/2:12.
• The panel is designed to endlap
easily without the need for notching
or cinch straps. Endlap to be 4”
minimum.
SDS-3
• The Super Span Panel can be used
in wall applications in the same
manner as a roof applications.
• In roof applications, Whirlwind
recommends that the Super Span X
Panel endlap occurs over the purlin.
There should be one run of tape
sealer in the endlap.
7. WARRANTY
Website: www.whirlwindsteel.com
Available warranties include 25 year
base material and paint warranties up
to 30 years also are available.
10. FILING SYSTEMS
Galvalume® is a registered trademark
of BIEC International, Inc.
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
6. AVAILABILITY AND COST
Ceram-A-Star 950™ is a registered
trademark of Akzo Nobel Coatings Inc.
9. TECHNICAL SERVICES
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
12”
Bearing leg for
Super Span X
1”
4”
³⁄16”
1¼”
Side Lap Detail
35⁄16”
SUPER SPAN / SUPER SPAN X DESIGN PROPERTIES
PANEL
GAUGE
Fy
(KSI)
WEIGHT
(PSF)
26 (t=.0170")
26 (t=.0176")
24
60*
60*
50
0.83
0.86
1.09
TOP IN COMPRESSION
Ix
(In4/Ft)
0.0370
0.0380
0.0570
Ma
(Kip-In/Ft)
1.2697
1.4057
1.7500
BOTTOM IN COMPRESSION
Ix
(In4/Ft)
0.0323
0.0337
0.0467
Ma
(Kip-In/Ft)
1.6610
1.7230
1.8633
* Fy is 80-ksi reduced to 60-ksi in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members - A2.3.2.
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
Super Span / Super Span X Roof
and Wall Panel
36” Coverage
SDS-4
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for 24 Ga.
Super Seam II
1. PRODUCT NAME
Whirlwind Building Components
Architectural Standing Seam Roof
System - 24 Ga. Super Seam II
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax: (832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
Materials:
Standard panel material • 24 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar colored panels are Galvalume
based material. The exterior is given
a finish coat of a 70% minimum
Kynar 500 PVF formulation, applied
over a properly treated and primed
surface. The exterior coat is 0.75
mils minimum thickness. The total
exterior film thickness including
primer is 0.90 to 1.10 mils thick.
The interior finish is a pigmented
polyester backer or water base
primer.
Clip material -
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
• Clips are die formed with a 20
Gauge Galvanized Steel top and a 14
Gauge Steel Base with a Red Oxide
finish. The clip base has 4 holes to
accommodate attachment to the
substrate. The clip top comes with
factory installed mastic to match the
mastic in the panel.
3. PRODUCT DESCRIPTION
Flashing Material -
Basic Use:
• The flashing material is the same
gauge, color and finish as the panel.
For roofing new buildings or reroofing
existing buildings of any type. Panels
are attached to the sub-structure with
concealed clips that allow for thermal
movement of the panels. Panels are
available with a Class 90 UL uplift
rating.
The panels are produced with 3” high
major ribs at 24” centers (this panel is
also available in 12” & 18” widths). The
panels comes standard in lengths up
to 45’-0”. This snap together system
does not require an electric seamer.
Metal Construction Association
Federal Specification TT-C-1796A
Type II Class B.
• Service temperature is from - 40° to
+ 180° F.
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7100 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Fasteners • Fasteners for connecting clips to
wood are #12 x 1 1/2” Type A wood
grips with a hex head (2 per clip).
• Fasteners for connecting clips to
purlins are 1/4-14 x 1” hex head self
drillers (2 per clip).
Light Gauge Structural system:
Basic Use Light gauge structural steel secondary
framing components for the roofing
system including studs, eave struts,
cees and zee sections also runners
for structural supports at desired roof
pitches.
Composition and materials Studs, cee and zee sections, eave struts and
runners are a minimum of 16 Gauge steel. All
material comes standard with a shop applied
red oxide primer. All steel meets or exceeds
the requirements of ASTM A 1011 and has
minimum yields of 55,000 psi.
Panel mastic 4. TECHNICAL DATA
• Panel side laps have a factory
applied hot melt mastic QSO Q4120 or equivalent containing 99.85%
solids by weight.
• Panel endlaps, ridge, gable and eave
sealers are butyl-based pressure
sensitive 7/8” x 3/16” tape mastic
that is non-staining, non-corrosive,
non-volatile and non-toxic. The
tape is 100% polyisobutyleneisoprene (butyl rubber) meeting
the performance requirements of
Physical Properties:
Paint system • Specular Gloss (60° Head): ASTM D
523 – 25% to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend Adhesion: ASTM D 4145 - 1T,
no loss of adhesion
SDS-5
• Impact Adhesion: ASTM D 2794
– 5/8 Steel ball - Impact of 80 inchpounds, no loss of adhesion
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
Paint system field performance:
• Film integrity: 35 years with no
blistering, peeling or cracking
• Chalk Resistance: ASTM D 4214 –
3000 hours – Weatherometer -rating
no greater than #8
• Color Change: ASTM D 2244 – 3000
hours – Weatherometer - no more
than 2 NBS units
5. INSTALLATION
The minimum roof slope shall be no
less than ¼:12. Panels are joined at
the sidelaps with an interlocking seam
standing 3” above the roof plane.
Sidelaps have factory applied mastic
sealer and are snapped together
without the use of a seaming tool.
8. MAINTENANCE
Installation is in conjunction with light gauge
structural framing or a solid substrate.
9. TECHNICAL SERVICES
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
6. AVAILABILITY AND COST
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
10. FILING SYSTEMS
7. WARRANTY
Available warranties include 25 year
base material and 20 year weather
tightness, providing for repair or
stoppage of any leaks caused by
normal wear and tear. Finish warranties
up to 35 years also are available.
Galvalume® is a registered trademark of
BIEC International, Inc.
Kynar 500™ is a registered trademark of
Elf Atochem North America, Inc.
SUPER SEAM-II DESIGN PROPERTIES
TOP IN COMPRESSION
BOTTOM IN COMPRESSION
PANEL
GAUGE
Fy
(KSI)
Weight
(PSF)
Ixe
(In.4-Ft.)
Sxe
(In.3/Ft.)
Maxo
(Kip-In.)
Ixe
(In.4-Ft.)
Sxe
(In.3/Ft.)
Maxo
(Kip-In.)
26
50
1.02
0.1158
0.0835
2.4997
0.2202
0.0901
2.6987
24
50
1.23
0.1350
0.0951
2.8477
0.2798
0.1153
3.4524
22
50
1.56
0.1837
0.1332
3.9877
0.3640
0.1504
4.5020
NOTES:
1. All calculations for the properties of Super Seam-II panels are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel
Structural Members.
2. Ixe is for deflection determination.
3. Sxe is for Bending.
4. Maxo is allowable bending moment.
5. All values are for the one foot of panel width.
Super Seam-II
Snap-Lock
Standing Seam Roof Panel
Side seam detail
SDS-6
Two Panels Show Above
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for Super Seam Plus
1. PRODUCT NAME
Whirlwind Building Systems Standing
Seam Roof System - Super Seam Plus
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
• 24 Gauge Steel coated both sides
with a layer of (Galvalume®)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar-500™ colored panels are
Galvalume® based material. The
exterior is given a finish coat of
a 70% minimum Kynar™ 500 PVF
formulation, applied over a properly
treated and primed surface. The
exterior coat is 0.75 mils minimum
thickness. The total exterior film
thickness including primer is 0.90
to 1.10 mils thick. The interior finish
is a pigmented polyester backer or
water base primer.
Clip material • Clips are die formed, with a 20
gauge galvanized steel top section
and a 14 Gauge Steel base with a
Red Oxide finish. The clip base has 4
holes to accommodate attachment
to the substrate. The clip top comes
with factory installed mastic to
match the mastic in the panel.
Flashing Material -
3. PRODUCT DESCRIPTION
• The flashing material is the be the same
gauge, color and finish as the panel.
Basic Use:
Panel mastic -
For roofing new buildings or reroofing
existing buildings of any type. Panels
are attached to the sub-structure with
concealed clips that allow for thermal
movement of the panels. The panels
are machine-joined at the edges with
a mechanically locked standing seam
to prevent leaks. Panels are available
with a Class 90 UL uplift rating.
The panels are produced with 3” high
major ribs at 24” centers (this panel is
also available in 18” widths). The panels
comes standard in lengths up to 45’-0”.
Materials:
Standard panel material -
• Panel side laps have a factory
applied hot melt mastic QSO Q4120 or equivalent containing 99.85%
solids by weight.
• Panel endlaps, ridge, gable and
eave sealers are butyl-based
pressure sensitive tape mastic
that is non-staining, non-corrosive,
non-volatile and non-toxic. The
tape is 100% polyisobutyleneisoprene (butyl rubber) meeting
the performance requirements of
Federal Specification TT-C-1796A
Type II Class B.
Metal Construction Association
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7100 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Fasteners • Fasteners for connecting clips to
wood are #12 x 1 1/2” Type A wood
grips with a hex head (2 per clip).
• Fasteners for connecting clips to
purlins are 1/4-14 x 1” hex head self
drillers (2 per clip).
Light Gauge Structural system:
Basic Use Light gauge structural steel secondary
framing components for the roofing system
including studs, eave struts, cees and
zee sections also runners for structural
supports at desired roof pitches.
Composition and materials Studs, cee and zee sections, eave
struts and runners are a minimum of
16 Gauge steel. All material comes
standard with a shop applied red oxide
primer. All steel meets or exceeds the
requirements of ASTM A1011 and has
minimum yields of 55,000 psi.
4. TECHNICAL DATA
Physical Properties:
Paint system • Gloss (60° Head): ASTM D 523 – 25% to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend Adhesion: ASTM D 4145 - 1T,
no loss of adhesion
• Impact Adhesion: ASTM D 2794 –5/8
Steel ball – Impact of 80 inch-pound,
no loss of adhesion
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
Service temperature is from - 40° to + 180° F.
• All gutter joints, downspout joints,
SDS-7
Paint system field performance:
6. AVAILABILITY AND COST
9. TECHNICAL SERVICES
• Film integrity: 35 years with no
blistering, peeling or cracking
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992.
Contact Whirlwind Building
Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
• Chalk Resistance: ASTM D 4214 –
3000 hours – Weatherometer - rating
no greater than #8
• Color Change: ASTM D 2244 –
30000 hours – Weatherometer - no
more than 2 NBS units
5. INSTALLATION
Panels are joined at the sidelaps with an
interlocking seam standing 3” above the
roof plane. Sidelaps have factory applied
mastic sealer and are seamed by a
special seaming machine. Installation is
in conjunction with light gauge structural
framing or a solid substrate.
7. WARRANTY
Available warranties include 25 year
material and weather 20 year tightness,
providing for repair or stoppage of any leaks
caused by normal wear and tear. Finish
warranties up to 35 years also are available.
10. FILING SYSTEMS
Galvalume® is a registered trademark
of BIEC International, Inc.
Kynar 500™ is a registered trademark
of Elf Autochem North America, Inc.
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
SUPER SEAM-PLUS DESIGN PROPERTIES
TOP IN COMPRESSION
BOTTOM IN COMPRESSION
PANEL
GAUGE
Fy
(KSI)
Weight
(PSF)
Ixe
(In.4-Ft.)
Sxe
(In.3/Ft.)
Maxo
(Kip-In.)
Ixe
(In.4-Ft.)
Sxe
(In.3/Ft.)
Maxo
(Kip-In.)
24
50
1.23
0.1507
0.0989
2.9619
0.3224
0.1307
3.9132
22
50
1.56
0.2059
0.1394
4.1741
0.4205
0.1708
5.1122
NOTES:
1. All calculations for the properties of Super Seam-II panels are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel
Structural Members.
2. Ixe is for deflection determination.
3. Sxe is for Bending.
4. Maxo is allowable bending moment.
5. All values are for the one foot of panel width.
Super Seam-Plus
Mechanically Seamed
Standing Seam Roof Panel
Unseamed side lap
Two Panels Show Above
SDS-8
Mechanically
Seamed side lap
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for Weather Lok 16
1. PRODUCT NAME
Whirlwind Building Components
Architectural Standing Seam Roof
System - Weather-Lok16
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
Standard panel material • 24 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar – color painted panels are
Galvalume based material. The
exterior is given a finish coat of
a 70% minimum Kynar 500 PVF
formulation, applied over a properly
treated and primed surface. The
exterior coat is 0.75 mils minimum
thickness. The total exterior film
thickness including primer is 0.90
to 1.10 mils thick. The interior finish
is a pigmented polyester backer or
water base primer.
Clip material -
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
3. PRODUCT DESCRIPTION
Basic Use:
For roofing new buildings or reroofing
existing buildings of any type. Panels
are attached to the sub-structure with
concealed clips that allow for thermal
movement of the panels. The panels
are machine-joined at the edges with
a mechanically locked standing seam
to prevent leaks. Panels are available
with a Class 90 UL uplift rating.
The panels are produced with 2” high
major ribs at 16” centers. The panels
come with striations and standard
lengths range to 45’-0”.
Materials:
• Clips are die formed, with a 22
gauge galvanized steel top section
and a 16 Gauge Galvanized Steel
base. The clip base has 2 holes to
accommodate attachment to the
substrate.
Flashing Material • The flashing material is the be the same
gauge, color and finish as the panel.
Panel mastic • Panel side laps have a factory
applied acrylic sealant Acryl-R or
equivalent containing 75% solids
(pigmented).
• Panel endlaps, ridge, gable and
eave sealers are butyl-based
pressure sensitive tape mastic
that is non-staining, non-corrosive,
non-volatile and non-toxic. The
tape is 100% polyisobutyleneisoprene (butyl rubber) meeting
the performance requirements of
Federal Specification TT-C-1796A.
• Service temperature is from -40° to
+ 180° F.
• All gutter joints, downspout joints,
Metal Construction Association
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7100 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Fasteners • Fasteners for connecting clips to
wood are #12 x 1” Type A wood
grips with a hex head (2 per clip).
• Fasteners for connecting clips to
purlins are #14 x 1 1/4” hex head self
drillers (2 per clip).
Light Gauge Structural system:
Basic Use Light gauge structural steel secondary
framing components for the roofing system
including studs, eave struts, cees and
zee sections also runners for structural
supports at desired roof pitches.
Composition and materials Studs, cee and zee sections, eave
struts and runners are a minimum of
16 Gauge steel. All material comes
standard with a shop applied red oxide
primer. All steel meets or exceeds the
requirements of ASTM A 1011 and has
minimum yields of 55,000 psi.
4. TECHNICAL DATA
Physical Properties:
Paint system • Gloss (60° Head): ASTM D 523 – 25%
to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend adhesion: ASTM D 4145- 1T, no
loss of adhesion
• Impact Adhesion: ASTM D 2794
– 5/8 Steel ball - Impact of 80 inchpound, no loss of adhesion
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
SDS-9
Paint system field performance:
6. AVAILABILITY AND COST
9. TECHNICAL SERVICES
• Film integrity: 35 years with no
blistering, peeling or cracking
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992.
Contact Whirlwind Building
Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
• Chalk Resistance: ASTM D 4214 –
3000 hour weatherometer - rating no
greater than #8
7. WARRANTY
Available warranties include 25
year material and 20 year weather
tightness, providing for repair or
stoppage of any leaks caused
by normal wear and tear. Finish
warranties up to 35 years also are
available.
• Color Change: ASTM D 2244 – 3000
hour weatherometer - no more than
2 NBS units
5. INSTALLATION
The minimum roof slope shall be no
less than ½:12. Panels are joined at
the sidelaps with an interlocking seam
standing 2” above the roof plane.
Sidelaps have factory applied mastic
sealer and are seamed by a special
seaming machine. Installation is in
conjunction with light gauge structural
framing or a solid substrate.
10. FILING SYSTEMS
Galvalume® is a registered trademark
of BIEC International, Inc.
Kynar 500™ is a registered trademark
of Elf Autochem North America, Inc.
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
16”
Factory Sealant
2”
WEATHER LOK - 16 DESIGN PROPERTIES
PANEL
GAUGE
Fy
(KSI)
WEIGHT
(PSF)
24
50
22
50
TOP IN COMPRESSION
BOTTOM IN COMPRESSION
Ix
(In4/Ft)
Ma
(Kip-In/Ft)
Ix
(In4/Ft)
Ma
(Kip-In/Ft)
1.23
0.1478
2.7134
0.1553
2.8852
1.56
0.1950
3.6264
0.1950
3.6264
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel
Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
Weather Lok-16
Mechanically Seamed
Standing Seam Roof Panel
Unseamed side lap
Two Panels Shown Above
SDS-10
Mechanically
Seamed side lap
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for Weather Snap 16
1. PRODUCT NAME
Whirlwind Building Components
Architectural Standing Seam Roof
System - Weather Snap
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
3. PRODUCT DESCRIPTION
Standard panel material • 24 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar-500 colored panels are
Galvalume based material. The
exterior is given a finish coat of
a 70% minimum Kynar 500 PVF
formulation, applied over a properly
treated and primed surface. The
exterior coat is 0.75 mils minimum
thickness. The total exterior film
thickness including primer is 0.90
to 1.10 mils thick. The interior finish
is a pigmented polyester backer or
water base primer.
Clip material • Clips are die formed 18 Gauge
Galvanized Steel. The UL-90 clip
base has 2 holes to accommodate
attachment to the substrate.
Flashing Material -
For roofing new buildings or reroofing
existing buildings of any type. Panels
are attached to the sub-structure with
concealed clips that allow for thermal
movement of the panels. Panels are
available with a Class 90 UL uplift
rating.
The panels are produced with 1 3/4”
high major pencil ribs at 16” centers.
The panels come with striations and
standard lengths range to 45’-0”. This
snap together system does not require
an electric seamer.
Materials:
Federal Specification TT-C-1796A .
Service temperature is from - 40° to
+ 180° F.
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7100 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Fasteners • Fasteners for connecting clips to
wood are #12 x 1” Type A #2 Phillips
pancake Head (2 per clip).
• Fasteners for connecting clips to
purlins are #12 x 1” #2 Phillips Head
self drillers (2 per clip).
Light Gauge Structural system:
Basic Use Light gauge structural steel secondary
framing components for the roofing system
including studs, eave struts, cees and
zee sections also runners for structural
supports at desired roof pitches.
Composition and materials -
• The flashing material is the be the
same gauge, color and finish as the
panel.
Panel mastic -
Basic Use:
Metal Construction Association
• Panel side laps have Acryl-R
a factory applied non-drying
permanently ductile acrylic
sealant. This material meets
the requirements of Federal
specification # TT-C-1796A, Type 1
Class A. This material is also USDA
approved. Service temperature is
from -60° to +200° F.
• Panel endlaps, ridge, gable and
eave sealers are butyl-based
pressure sensitive tape mastic
that is non-staining, non-corrosive,
non-volatile and non-toxic. The
tape is 100% polyisobutyleneisoprene (butyl rubber) meeting
the performance requirements of
Studs, cee and zee sections, eave
struts and runners are a minimum of
16 Gauge steel. All material comes
standard with a shop applied red oxide
primer. All steel meets or exceeds the
requirements of ASTM A 1011 and has
minimum yields of 55,000 psi.
4. TECHNICAL DATA
Physical Properties:
Paint system • Gloss (60° Head): ASTM D 523 – 25%
to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend Adhesion: ASTM D 3363 - 1T,
no loss of adhesion
SDS-11
• Impact Adhesion: ASTM D 2794 – 5/8
Steel ball –Impact of 80inch-pound,
no loss of adhesion
sealer and are snapped together without
the use of a seaming tool. Installation is
in conjunction with light gauge structural
framing or a solid substrate.
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
6. AVAILABILITY AND COST
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
9. TECHNICAL SERVICES
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992.
Paint system field performance:
• Film integrity: 35 years with no
blistering, peeling or cracking
• Chalk Resistance: ASTM D 4214 –
3000 hour – weatherometer - rating
no greater than #8
7. WARRANTY
Available warranties include 25
year material and 20 year weather
tightness, providing for repair or
stoppage of any leaks caused
by normal wear and tear. Finish
warranties up to 35 years also are
available.
• Color Change: ASTM D 2244 – 3000
hour - no more than 2 NBS units
5. INSTALLATION
The minimum roof slope shall be no
less than 3:12. Panels are joined at the
sidelaps with an interlocking seam
standing 1 3/4” above the roof plane.
Sidelaps have factory applied mastic
Contact Whirlwind Building
Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
10. FILING SYSTEMS
Galvalume® is a registered trademark
of BIEC International, Inc.
Kynar 500™ is a registered trademark
of Elf Autochem North America, Inc.
16”
Factory Sealant
(optional)
1¾”
WEATER SNAP -16 DESIGN PROPERTIES
PANEL
GAUGE
Fy
(KSI)
WEIGHT
(PSF)
24
50
1.26
TOP IN COMPRESSION
Ix
Ma
(In4/Ft)
(Kip-In/Ft)
BOTTOM IN COMPRESSION
Ix
Ma
(In4/Ft)
(Kip-In/Ft)
0.0803
0.0855
1.6467
1.7817
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
Weather Snap-16
Snap-Lock
Standing Seam Roof Panel
Side Lap Detail
Two Panels Show Above
SDS-12
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for 24 Ga.
7.2 Rib and 7.2N Rib
1. PRODUCT NAME
Whirlwind Building Components
Commercial Roof and wall System -24
Ga. 7.2 Rib and 7.2N Rib Panel
2. MANUFACTURER
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
• 24 Gauge Steel coated both
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM A-792.
• Trinar 500 colored panels are
Galvalume based material. The
exterior is given a finish coat of
a 70% minimum Kynar 500 PVF
formulation, applied over a properly
treated and primed surface. The
exterior coat is 0.75 mils minimum
thickness. The total exterior film
thickness including primer is 0.90
to 1.10 mils thick. The interior finish
is a pigmented polyester backer or
water base primer.
• The panels are also available in the
Silicone Polyester paint system.
Flashing Material -
Metal Construction Association
Fasteners • Fasteners for connecting panels
to purlins or girts (when insulation
thickness is 3” or less) are #12 x 1
1/4” Self-drilling screw with long
life hex heads and washer or #12 x
1 1/2” selfdrilling screw with long
life hex head and washer (when
insulation thickness is between 3”
and 6”).
4. TECHNICAL DATA
Physical Properties:
Paint system (Kynar-500 only)• Specular Gloss (60o Head): ASTM D
523 – 25% to 40%
• Pencil Hardness: ASTM D 3363 - HB
• Bend Adhesion: ASTM D4145 - 1T no loss of adhesion
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
• The flashing material is the same
gauge, color and finish as the panel.
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
• Panel side laps, panel endlaps,
ridge, gable and eave sealers are
butyl-based pressure sensitive
tape mastic that is non-staining,
non-corrosive, non-volatile and
non-toxic. The tape is 100%
polyisobutylene-isoprene (butyl
rubber) meeting the performance
requirements of Federal
Specification TT-C-1796A . Service
temperature is from - 40o to + 180o F.
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7108 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
• Color Change: ASTM D 2244 – 3000
hours – Weatherometer - no more
than 2 NBS units.
3. PRODUCT DESCRIPTION
Basic Use:
For roof and walls for new buildings
and retofitting existing metal buildings.
Panels are attached to the substructure with exposed fasteners.
Panels are available with a Class 90 UL
uplift rating.
The panels are produced with 1 ½”
high major ribs at 7.2” centers and the
panel coverage is 36” for 7.2 Rib and
28.8” for 7.2N Rib.
Materials:
Standard panel material -
Panel mastic (Optional)-
• Impact Adhesion: ASTM D 2794
– 5/8” steel ball – impact of 80 inchpounds, no loss of adhesion
Paint system field performance:
• Film integrity: 35 years with no
blistering, peeling or cracking
• Chalk Resistance: ASTM D 4214 –
3000 hours – weatherometer - rating
no greater than #8 .
5. INSTALLATION
• Minimum roof slope to be no less
than 1/4:12.
• The panel is designed to endlap easily
without the need for notching or cinch
straps. Endlap to be 4” minimum.
SDS-13
• The 7.2 and 7.2N Panels can be used
in wall applications in the same
manner as a roof applications.
• In roof applications, Whirlwind
recommends that the 7.2 and 7.2
Panel endlap occurs over the purlin.
There should be one run of tape
sealer in the endlap.
6. AVAILABILITY AND COST
7. WARRANTY
9. TECHNICAL SERVICES
Available warranties include 25 year
base material and paint warranties up
to 35 years also are available.
Contact
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: www.whirlwindsteel.com
8. MAINTENANCE
Only normal routine maintenance is
required. Roofs should be inspected
yearly and gutters cleaned as needed.
10. FILING SYSTEMS
Galvalume is a registered trademark
of BIEC International, Inc.
Kynar 500™ is a registered trademark
of Elf Atochem North America, Inc.
Contact
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992.
7.2 RIB / 7.2N RIB
36”
7.2”
7.2 RIB
1.5”
28.8”
7.2”
7.2N RIB
1.5”
LAP DETAIL FOR 7.2N RIB
LAP DETAIL FOR 7.2 RIB
DETAIL OUTBOARD EDGE
OVERLAP EDGE FOR 7.2N RIB
36” COVERAGE
DETAIL OUTBOARD EDGE
OVERLAP EDGE FOR 7.2 RIB
7.2N / 7.2N DESIGN PROPERTIES
TOP IN COMPRESSION
PANEL
GAUGE
Fy
(KSI)
Fb
(KSI)
Ix
(In4-Ft)
Ma
(In-Kip)
BOTTOM IN COMPRESSION
Ix
(In4-Ft)
Ma
(In-Kip)
29
60*
0.71
0.0460
1.7500
0.0430
1.4833
26
60*
0.87
0.0630
2.5433
0.0593
2.1400
24
50
1.14
0.0953
3.4733
0.0950
3.1533
22
50
1.47
0.1300
4.9100
0.1300
4.4167
* Fy is 80-ksi reduced to 60-ksi in accordance with the 2001 edition of the North American Specification for Design Of ColdFormed Steel Structural Members - A2.3.2.
28.8” COVERAGE
SDS-14
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification for Design Of
Cold-Formed Steel Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
WHIRLWIND STEEL BUILDINGS, INC.
WHIRLWIND BUILDING SYSTEMS | WHIRLWIND BUILDING COMPONENTS
SPEC DATA
for 26 Ga.
7.2 Rib and 7.2N Rib
1. PRODUCT NAME
sides with a layer of (Galvalume)
aluminum-zinc alloy (approximately
55% aluminum and 45% zinc) applied
by the continuous hot-dip method.
Triple spot test per ASTM
A-792.
Metal Construction Association
1/4” Self-drilling screw with Carbon
steel hex head and washer or #12
x 1 1/2” self-drilling screw with
carbon steel hex head and washer
(when insulation thickness is
between 3” and 6”).
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) -324-9992
Fax:
(832) -553-4700
• Ceram-A-Star 950 colored panels
are Galvalume based material.
The exterior is given a finish coat
of a High Performance Silicone
Polyester formulation, applied
over a properly treated and primed
surface. The exterior coat is 0.7
mils minimum thickness. The total
exterior film thickness including
primer is 0.9 to 1.15 mils thick.
The interior finish is a pigmented
polyester backer.
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122
Phone: (800)-363-8142
Fax:
(770)-739-1226
• The panels are also available in the
Trinar (Kynar 500) paint system in
Kelly Green, River Teal and Deep
Blue colors.
2450 E.L. Anderson Blvd.
Claremore, OK 74017
Phone: (877)-875-0077
Fax:
(918)-343-7114
Flashing Material -
Paint system field performance:
• The flashing material is the same
gauge, color and finish as the panel.
• Film integrity: 30 years with no
blistering, peeling or cracking
Panel mastic (Optional)-
• Chalk Resistance: ASTM D 4214 –
2000 hours – Weatherometer - rating
no greater than #8.
Whirlwind Building Components
Commercial Roof and Wall System 26 Ga. 7.2 and 7.2N X Panel
2. MANUFACTURER
500 Whirlwind Dr.
Freeport, MN 58331
Phone: (888)-836-7203
Fax:
(320)-836-7201
3. PRODUCT DESCRIPTION
Basic Use:
For roof and walls for new buildings
and retofitting existing metal buildings.
Panels are attached to the sub-structure
with exposed fasteners. Panels are
available with a Class 90 UL uplift rating.
• Panel side laps, panel endlaps,
ridge, gable and eave sealers are
butyl-based pressure sensitive
tape mastic that is non-staining,
non-corrosive, non-volatile and
non-toxic. The tape is 100%
polyisobutylene-isoprene (butyl
rubber) meeting the performance
requirements of Federal
Specification TT-C-1796A .Service
temperature is from -40o to + 180o F.
The panels are produced with 1 ½”
high major ribs at 7.2” centers and the
panel coverage is 36” for the 7.2 panel
and 28.8” for the 7.2N Panel.
• All gutter joints, downspout joints,
rake, eave and ridge flashing laps
are sealed with Schnee-Morehead
SM7108 or equivalent, meeting or
exceeding the test requirements of
TT-S-00230C, Type II, Class A.
Materials:
Fasteners -
Standard panel material -
• Fasteners for connecting panels
to purlins or girts (when insulation
thickness is 3” or less) are #12 x 1
• 26 Gauge Steel coated both
4. TECHNICAL DATA
Physical Properties:
Paint system (Ceram-A-Star 950 only)• Specular Gloss (60o Head): ASTM D
523 – 25% to 40
• Pencil Hardness: ASTM D 3363 - F
• Bend Adhesion: ASTM D4145 - 2T,
no loss of adhesion
• Cross Hatch adhesion: ASTM D 3359
- no loss of adhesion
• Color Change: ASTM D 2244 – 2000
hours – Weatherometer - no more
than 5 NBS units.
5. INSTALLATION
• Minimum roof slope to be no less
than 1/4:12.
• The panel is designed to endlap easily
without the need for notching or cinch
straps. Endlap to be 4” minimum.
• The 7.2 and 7.2N Panels can be used
in wall applications in the same
manner as a roof applications.
SDS-15
• In roof applications, Whirlwind
recommends that the 7.2 Panel
endlap occurs over the purlin. There
should be one run of tape sealer in
the endlap.
6. AVAILABILITY AND COST
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
7. WARRANTY
9. TECHNICAL SERVICES
Available warranties include 25 year
base material and paint warranties up
to 30 years also are available.
Contact
Whirlwind Building Components
8234 Hansen Road
Houston, TX 77075
Phone: (800) 324-9992
Website: http://www.whirlwindsteel.com
8. MAINTENANCE
Only routine maintenance required.
Roofs should be inspected yearly and
gutters cleaned as needed.
10. FILING SYSTEMS
Galvalume is a registered trademark of
BIEC International, Inc.
Ceram-A-Star 950™ is a registered
trademark of Akzo Nobel Coatings Inc.
7.2 RIB / 7.2N RIB
36”
7.2”
7.2 RIB
1.5”
28.8”
7.2”
7.2N RIB
1.5”
LAP DETAIL FOR 7.2N RIB
LAP DETAIL FOR 7.2 RIB
DETAIL OUTBOARD EDGE
OVERLAP EDGE FOR 7.2N RIB
36” COVERAGE
DETAIL OUTBOARD EDGE
OVERLAP EDGE FOR 7.2 RIB
7.2N / 7.2N DESIGN PROPERTIES
TOP IN COMPRESSION
PANEL
GAUGE
Fy
(KSI)
Fb
(KSI)
Ix
(In4-Ft)
Ma
(In-Kip)
BOTTOM IN COMPRESSION
Ix
(In4-Ft)
Ma
(In-Kip)
29
60*
0.71
0.0460
1.7500
0.0430
1.4833
26
60*
0.87
0.0630
2.5433
0.0593
2.1400
24
50
1.14
0.0953
3.4733
0.0950
3.1533
22
50
1.47
0.1300
4.9100
0.1300
4.4167
* Fy is 80-ksi reduced to 60-ksi in accordance with the 2001 edition of the North American Specification for Design Of ColdFormed Steel Structural Members - A2.3.2.
28.8” COVERAGE
SDS-16
NOTES:
1. All section properties are calculated in accordance with the 2001 edition of the North American Specification for Design Of
Cold-Formed Steel Structural Members.
2. Ix is for deflection determination.
3. Mx is allowable bending moment.
STRUCTURAL TECHNICAL INFORMATION
STANDARD PUNCHING PATTERNS FOR CEES AND ZEES
14" Zee or Cee
3
8
3
12" Zee or Cee
2
8
2
10" Zee or Cee
3
4
3
8" Zee or Cee
2
4
2
6" Zee or Cee
1
4
1
4" Zee or Cee
1
2
1
1¾
Flange punching available
on 8" and 10" zees only
NOTES:
1. All slots are 5/8" x 3/4".
2. Consult the Section Property section for additional engineering information.
3. Refer to the punch patterns on the following pages for exact hole locations.
STI-1
STRUCTURAL TECHNICAL INFORMATION
1
1
1¾
NOTES:
1. Minimum length is 0'-6".
2. All slots are 5/8" x 3/4".
3. Available on all zee and cee depths from 4" to 14".
STI-2
14" Zee or Cee
8
3
3
12" Zee or Cee
8
2
2
10" Zee or Cee
4
3
3
8" Zee or Cee
4
2
2
6" Zee or Cee
4
1
1
2
1
1
4" Zee or Cee
SIMPLE PUNCH PATTERNS FOR CEES AND ZEES
STRUCTURAL TECHNICAL INFORMATION
OPTIONAL PUNCH PATTERNS FOR CEES AND ZEES (WA/WD)
All Tails
2'-7¾
4
8
4
6
4
2
2
8
4
6
14" Zee or Cee
8
3
3
12" Zee or Cee
8
2
2
4
4
2
3
3
10" Zee or Cee
8" Zee or Cee
4
4 1¾
11¾
3'-1¾
1
1
2'-1¾
2
3'-5¾
6" Zee or Cee
2'-3¾
5¾
1'-3¾
4'-1¾
1'-11¾
4'-5¾
1¾
Pattern WA - Optional Web
3
9
3'-0¼
3'-3¼
3
9
2'-0¼
2'-3¼
3
7
1'-0¼
3 2¼
5¼
1'-3¼
Pattern WD - Optional Flange
Includes punch pattern WA in the web
NOTES:
1. Minimum length is 9'-2".
2. All slots are 5/8" x 3/4".
3. Web punching pattern "WA" is available on zees and cees from 6" to 14" deep
4. Optional flange punching pattern "WD" is available on 8" and 10" deep zees only
STI-3
STRUCTURAL TECHNICAL INFORMATION
OPTIONAL PUNCH PATTERNS FOR CEES AND ZEES (WB/WE)
3'-1¾
8
4
2 2 2 4 4 2 2
8
5'-1¾
5'-5¾
8
1¾
Pattern WB - Optional Web
3'-0¼
3'-3¼
3
9
2'-0¼
2'-3¼
3
7
1'-0¼
3 2¼
5¼
1'-3¼
Pattern WE - Optional Flange
Includes punch pattern WB in the web
NOTES:
1. Minimum length is 12'-6".
2. All slots are 5/8" x 3/4".
3. Web punching pattern "WB" is available on zees and cees from 6" to 14" deep.
4. Optional flange punching pattern "WE" is available on 8" and 10" deep zees only.
STI-4
14" Zee or Cee
3
8
3
1'-11¾
9
12" Zee or Cee
8
2
11¾
1'-3 ¾
3
2
3
4
3
9¾
3'-5¾
10" Zee or Cee
2
4
2
5¾
3'-3¾
8" Zee or Cee
1
4 2 4 4 1¾
2'-11¾
4'-1¾
4
2'-1¾
4'-5¾
1
2'-3¾
5'-9¾
4 4 4
All Tails
6" Zee or Cee
2'-7¾
6'-1¾
STRUCTURAL TECHNICAL INFORMATION
10
3'-5
4 2
10
4
6
14" Zee or Cee
12" Zee or Cee
6" Zee or Cee
All Tails
10" Zee or Cee
2'-7
2'-3
2'-1
8" Zee or Cee
OPTIONAL PUNCH PATTERNS FOR CEES AND ZEES (WC/WF)
4 1
5
11
1'-3
1¾
Pattern WC - Optional Web
3
7
11½
1'-2½
3 1½
4½
Pattern WF - Optional Flange
Includes punch pattern WC in the web
MENU:
1. Minimum length is 7'-0".
2. All slots are 5/8" x 3/4".
3. Web punching pattern "WC" is available on zees and cees from 6" to 14" deep.
4. Optional flange punching pattern "WF" is available on 8" and 10" deep zees only.
STI-5
STRUCTURAL TECHNICAL INFORMATION
1
Pattern WH - Optional Web
NOTES:
1. Minimum length is 0'-6".
2. All slots are 5/8" x 3/4".
3. Available on all zee and cee depths from 6" to 14".
STI-6
14" Zee or Cee
8
3
3
12" Zee or Cee
8
2
2
10" Zee or Cee
4
3
3
8" Zee or Cee
4
2
2
4
1
1
6" Zee or Cee
OPTIONAL PUNCH PATTERNS FOR CEES AND ZEES (WH)
STRUCTURAL TECHNICAL INFORMATION
STANDARD CONNECTION DETAILS FOR CEES AND ZEES
CL
¼
Frame
½"Ø x 1¼" A307
bolt with nut (typ.)
Zee
Attachment clip
Attachment clip
(see lap details
for available clips)
Frame
Zee
A
Section "A"
Typical Zee Lap Detail
CL Frame
½"Ø x 1¼" A307
bolt with nut (typ.)
Frame
¼
Cee
Cee
Attachment clip
(see lap details
for available clips)
Attachment clip
B
Section "B"
Typical Cee Connection Detail
NOTES:
1. All connection bolts are ½"Ø x 1¼" A307 machine bolts with nuts.
2. Refer to the lap details on the following pages for available clips.
STI-7
STRUCTURAL TECHNICAL INFORMATION
STANDARD CONNECTION DETAILS FOR CEES AND ZEES
Attachment clip
(see lap details
for available clips)
CL Frame
½"Ø x 1¼" A307
bolt with nut (typ.)
Frame
Zee or Cee
A
Typical Flush Zee or Cee Connection Detail
Frame
Frame
Cee
Zee
Attachment clip
Attachment clip
Section "A" with Zee
NOTES:
1. All connection bolts are ½"Ø x 1¼" A307 machine bolts with nuts.
2. Refer to the connection details on the following pages for available clips.
STI-8
Section "A" with Cee
STRUCTURAL TECHNICAL INFORMATION
ZEE INSTALLATION DETAILS
LF
ap
ed L
uir
Req
SF
X
SF
LF
LF = Long Flange
SF = Short Flange
LF
Top flange (typ.)
SF
SF
SF
SF
LF
LF
LF
Zee (typ.)
LAP LAYOUT
SECTION "X"
NOTES:
1. Rotate each zee as required to alternate between long and short flanges.
2. Lap connection bolts are omitted for clarity.
STI-9
STRUCTURAL TECHNICAL INFORMATION
ZEE CONNECTION DETAIL ~ SIMPLE SPAN FLUSH CONDITION
61⁄8
1¾
Flange brace
(as required)
43⁄8
61⁄8
43⁄8
1'-3¾
1'-3¾
CL Frame
NOTES:
1. This connection requires the WA punch with flange braces and the SIMPLE punch without flange braces.
2. Each connection requires (4) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. This connection applies to all zee and cee depths from 6" to 14".
5. Available clips:
6" through 10" zees and cees - AK200
12" and 14" zees and cees - AK208
STI-10
STRUCTURAL TECHNICAL INFORMATION
ZEE CONNECTION DETAIL ~ SIMPLE SPAN BY-PASS CONDITION
2
1¾
Flange brace
(as required)
2
½
2'-2 or 2'-8
2'-2 or 2'-8
CL
Frame
NOTES:
1. This connection requires the WA punch with flange braces and the SIMPLE punch without flange braces.
2. Each connection requires (4) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. This connection applies to all zee and cee depths from 6" to 14".
5. Available clips:
6" zee or cee - AA301
8" zee or cee - AB301
10" zee or cee - AC301
12" zee or cee - AD301
14" zee or cee - AE301
STI-11
STRUCTURAL TECHNICAL INFORMATION
ZEE CONNECTION DETAIL ~ SIMPLE SPAN BY-PASS CONDITION
1¼ 1¼
¼
1
Flange brace
(as required)
2'-3¼
2'-3¼
Frame
CL
NOTES:
1. This connection requires the WC punch.
2. Each connection requires (4) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. This connection applies to zee depths from 6" to 14".
STI-12
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 6” LAP
0'-6
3
Total Lap
3
1 2 2 1
Flange brace
(as required)
2'-4
2'-4
CL
Frame
NOTES:
1. This lap requires the WC punch.
2. Each lap connection requires (4) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 0'-2¾"
Interior bay ~ Interior bay length plus 0'-6"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-13
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 7½” LAP
0'-7½
3¾
1¾
Flange brace
(as required)
Total Lap
3¾
1¾
2 2
2'-4
2'-4
CL
Frame
NOTES:
1. This lap requires the WA punch.
2. Each lap connection requires (4) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 0'-3½"
Interior bay ~ Interior bay length plus 0'-7½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-14
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 2’-2” LAP
2'-2 Total Lap
1'-1
1
Flange brace
(as required)
10
1'-1
2 2
10
2'-4
1
2'-4
CL
Frame
NOTES:
1. This lap requires the WC punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 1'-0¾"
Interior bay ~ Interior bay length plus 2'-2"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-15
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 2’-3½” LAP
2'-3Z\x Total Lap
1'-1¾
10
1¾
Flange brace
(as required)
1'-1¾
2 2
10
2'-4
1¾
2'-4
CL
Frame
NOTES:
1. This lap requires the WA punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 1'-1½"
Interior bay ~ Interior bay length plus 2'-3½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-16
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 3’-3½” OFFSET LAP
3'-3½ Total Lap
1'-1¾
1¾
Flange brace
(as required)
10
2'-1¾
2 2
2'-4
1'-10
1¾
2'-4
CL Frame
NOTES:
1. This lap requires the WA punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 2'-1½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-17
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 4’-3½” LAP
4'-3½ Total Lap
2'-1¾
Flange brace
(as required)
1¾
1'-10
2'-1¾
2
2
1'-10
2'-4
2'-4
CL Frame
NOTES:
1. This lap requires the WA punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 2'-1½"
Interior bay ~ Interior bay length plus 4'-3½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-18
1¾
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 5’-3½” OFFSET LAP
5'-3½ Total Lap
2'-1½
1¾
Flange brace
(as required)
1'-10
3'-1¾
2 2
2'-10
2'-4
1¾
2'-4
CL
Frame
NOTES:
1. This lap requires the WB punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 3'-1½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-19
STRUCTURAL TECHNICAL INFORMATION
ZEE LAP DETAIL ~ 6’-3½” OFFSET LAP
6'-3½ Total Lap
3'-1¾
1¾
Flange brace
(as required)
3'-1¾
2 2
2'-10
2'-10
2'-4
2'-4
CL
Frame
NOTES:
1. This lap requires the WB punch.
2. Each lap connection requires (8) ½"Ø x 1¼" A307 bolts with nuts to be installed in the indicated holes.
3. Each flange brace requires an additional (2) ½"Ø x 1¼" A307 bolts with nuts.
4. Purlin length calculations:
End bay ~ End bay length plus 3'-1½"
Interior bay ~ Interior bay length plus 6'-3½"
5. Available clips:
6" zee ~ AA301
8" zee ~ AB301
10" zee ~ AC301
12" zee ~ AD301
14" zee ~ AE301
STI-20
1¾
STRUCTURAL TECHNICAL INFORMATION
STANDARD EAVE STRUT PUNCH PATTERN - SINGLE OR DOUBLE SLOPED
2½±
*
As Req'd
8", 10",
or 12"
1¾
3
2
3 1¾
12
2
Length as Required
5½
2½±
*
12
8", 10",
or 12"
As Req'd
1¾
3
3 1¾
Length as Required
*
2
12
2
5¾
NOTES:
1. All holes are 9/16"Ø.
2. Available depths from 8" to 12".
3. Flange bevel must be specified where applicable.
STI-21
STRUCTURAL TECHNICAL INFORMATION
STANDARD EAVE STRUT PUNCH PATTERN - HIGH EAVE SINGLE OR DOUBLE SLOPED
As
Req'd
2½±
*
8", 10",
or 12"
12
1¾
3
3 1¾
2
Length as Required
2
5½
2½±
8", 10",
or 12"
12
*
As Req'd
12
1¾
3
3 1¾
Length as Required
NOTES:
1. All holes are 9/16"Ø.
2. Available depths from 8" to 12".
3. Flange bevel must be specified where applicable.
STI-22
2
2
5½
*
STRUCTURAL TECHNICAL INFORMATION
EAVE STRUT PUNCH PATTERN - UNIVERSAL EAVE STRUT
2
3
12
8"
4
1
12
1¾
3
3 1¾
Length as Required
2
2
5
NOTES:
1. All holes are 9/16"Ø.
2. 8" depth available.
3. Used for 1:12 and 4:12 roof slopes.
STI-23
This page left intentionally blank.
Certifications/
MISC
Back to
Contents
TABLE OF CONTENTS
Miscellaneous / Certifications
Product
Page
Terms & Condition
Whirlwind Terms and Condition for Sales of Goods ................................................................................................................... TC-1 - TC-4
Whirlwind Paint Warranties
35-year Paint Finish Limited Warranty ............................................................................................................................................W-1 - W-2
40-year Paint Finish Limited Warranty ............................................................................................................................................W-3 - W-4
10-year Paint Finish Limited Warranty ............................................................................................................................................W-5 - W-6
25-year Acrylic-coated Galvalume® Finish Limited Warranty ...................................................................................................W-7 - W-8
Certifications
Certification for U.L. Class 60 U.L. Class 90 Roof Deck Assembly .......................................................................................................... C-1
Energy Star Certification................................................................................................................................................................................ C-2
This page intentionally left blank.
Terms and Conditions effective September 1, 2003
WHIRLWIND BUILDING COMPONENTS
A Division of Whirlwind Steel Buildings, Inc.
PO Box 75280, Houston, TX 77234-5280 | 8234 Hansen Road (77075)
(Phone) 713.946.7140 | (Fax) 832.553.4893 | (US Wats) 800.324.9992
TERMS & CONDITIONS FOR SALES OF GOODS
Component Sales Division
DEFINITIONS:
TERMINATION BY SELLER:
As used herein, “Seller” means Whirlwind Steel Buildings, Inc.
a/k/a, Whirlwind Building Systems, Whirlwind Building Components,
Whirlwind Technical Sales Department, P.O. Box 75280, Houston,
TX 77234. “Buyer” means the person or entity represented by the
signature on the acceptance page herein. “Component Order”
means each purchase contract between Buyer and Seller under
which Buyer agrees to purchase and Seller agrees to fabricate
and deliver Goods for a mutually agreed price. “Goods” means the
materials, equipment, goods, elements, parts, or chattels comprising
the Component Order. “Change Order” means a written document
signed by Buyer and accepted by Seller that revises or modifies
the Component Order in any fashion.
If (i) Buyer fails to make any payment when due and owing; (ii)
Buyer commits a material or anticipatory breach of the Component
Order, Seller’s credit terms, or this agreement; (iii) Buyer becomes
insolvent, or enters voluntary or involuntary bankruptcy or
receivership: then Seller shall have the right (without prejudice to
any other rights or remedies it may have hereunder or by operation
of law) to terminate the Component Order and to seek all remedies
available, at law or in equity.
CONTINUING AGREEMENT:
Buyer wishes to purchase and Seller wishes to sell Goods for a
mutually agreed price, on an ongoing basis. Because it is agreed
that such an arrangement will benefit both parties, and for mutual
consideration, the undersigned, individually, jointly and severally
agree to the following terms and conditions for all purchases Buyer
makes from Seller. Each Component Order, with attachments, shall
exist concurrently and cumulatively with these terms and conditions,
the terms and conditions of Seller’s credit application, and any
credit terms specific to that Component Order
ORDER ACCEPTANCE:
Buyer’s Orders of Goods are documented by a written Component
Order, including attachments. Buyer’s or Buyer’s representative’s
or agent’s signature on the Component Order signifies that (1) Buyer
has checked and verified the Component Order for accuracy (2)
Buyer agrees to accurately complete and submit Seller’s Job Site
Information form, when requested by Seller, with the signed order
(3) Buyer agrees to timely accept the Goods, as itemized in the
Component Order when fabrication is complete, (4) Buyer agrees
to timely pay the agreed price as stated on the Component Order,
and (5) these terms and conditions apply to the order. All orders
are subject to acceptance by Seller. Buyer’s signature on the
Component Order signifies that Seller agrees to fabricate Buyer’s
Component Order, in accordance with the Component Order, in a
workmanlike manner. Any conflicting provision of a purchase order
issued by Buyer shall be of no force and effect. Buyer consent to
receiving faxes. A faxed, signed copy of a Component Order and
any attachments shall act as an original.
CHANGES:
A
S
CANCELLATION BY BUYER:
Buyer may cancel any Component Order upon written notice to
Seller and upon the payment of Seller’s cancellation charges which
shall include all costs incurred but unpaid at the time of cancellation
including, but not limited to, payment for any Goods fabricated prior to
Seller processing the cancellation. If Buyer’s written cancellations are
made via FAX, Buyer must obtain signed verification from Seller that the
cancellation was received in order for the cancellation to be valid.
REV. 9/1/06
Orders for fabricated Orders are usually ready to ship within three
(3) to ten (10) working days following Seller’s authorized release
of Order to fabricator’s shop. This completion schedule depends
on the type of Goods ordered, the Buyer’s account status and the
Seller’s current workload and is not guaranteed. If shipment of
any part of the order is delayed or is not in accordance with the
order, the Buyer’s obligation to accept the remainder of the Order
shall not be affected.
PRICING:
P
The Price payable by Buyer for the Goods shall be as set forth on
the Component Order. Unless otherwise noted on the Component
Order, the Price does not include taxes, insurance charges,
transportation or storage charges, unloading of Goods at Buyer’s
job site, building permit costs or fees, charges for performance
bonds, bid bonds or payment bonds or any charges arising out of
Change Orders, all of which shall be the responsibility of Buyer. All
prices are quoted as a net, F.O.B. Seller’s plant, payable in United
States Dollars at Seller’s offices, in Houston, Harris County, Texas
U.S.A. without offset or withholding of any kind. Prices in Seller’s
book are subject to change without notice and must be verified.
All quotations are for acceptance within fifteen (15) days. After
fifteen (15) days, prices are subject to change without notice. If
Seller’s fabrication of an Order is delayed for any reason including,
but not limited to, the request of Buyer or Force Majeure, for a
continuous period of fifteen (15) calendar days or more, the Order
shall be subject to re-pricing by Seller to reflect any increases in
labor and/or material, which Buyer agrees to pay.
M
Orders are specially fabricated in accordance with Buyer’s signed
Component Order. Buyer shall send any requests for additions,
deletions or other revisions to the Component Order to Seller,
promptly and in writing, referencing the Component Order number
of the order to be changed. If Buyer’s written change requests are
made via FAX, Buyer must obtain signed verification from Seller
that the change request was received and accepted in order for
the change to be valid. If the requested changes result in pricing
changes to the Component Order, Seller will produce a “Change
Order” documenting such changes. The Buyer must sign and
return the Change Order to the Seller for the change(s) to become
a valid part of the Component Order. Buyer agrees to pay for any
Goods fabricated by the Seller on the order prior to processing
the Change Order. Seller will not be responsible for any delay in
fabrication or shipment caused by Change Orders made at a point
in time whereby the completion of the Change Order would cause
a delay in the completion of the Component Order.
E
L
FABRICATION SCHEDULE :
SALES OR USE TAX:
Prices quoted do not include applicable sales or use taxes.
Buyer shall be responsible for paying any and all taxes that may
be imposed on Component Orders by any taxing authorities unless,
prior to shipment or pick–up, Buyer provides Seller with (i) a valid
sales or use tax exemption (ii) a signed copy of their original resale
certificate or (iii) written documentation of any other tax exemptions
verifying tax exempt status. When invoicing Component Orders,
Whirlwind will use all available information in an attempt to charge
the appropriate tax in effect on shipment date as required by the
various states. However, should a subsequent audit reveal that a
different Tax is due than what Seller included in its invoice to Buyer,
Buyer agrees to pay any additional Tax due and Seller agrees to
refund any excess Tax that was erroneously collected.
PAYMENT/CREDIT TERMS:
Seller’s Credit Department, at its sole discretion, shall have the
right to approve and assign Buyer credit, set credit limits, set payment
terms and increase, decrease, modify or terminate Buyer’s credit
privileges and/or payment terms at any time. Unless Seller notifies
Buyer otherwise, the following terms will apply:
1.
First time or occasional Buyers shall pay cash on delivery,
C.O.D., for the contract value of the Component Order,
including applicable taxes and freight charges, on or
before the date of delivery or, if Buyer is picking up the
Goods, at the time Buyer picks up the order. Payment
shall be made with cash or Cashier’s Check payable to
Whirlwind Steel Buildings, Inc. In some circumstances,
prior arrangements can be made through Seller’s Credit
Buyer Initials _________________
TC-1
Terms and Conditions effective September 1, 2003
Department to accept a personal or company check.
Personal or company checks shall be verified with the
Buyer’s bank prior to shipment or pick up which may
delay fabrication time. Seller shall not be responsible for
any delay on an order caused by the process of verifying
checks. Acceptance of a personal or company check is at
Seller’s sole discretion.
2.
Specially fabricated Orders may require up to a 50% deposit
before fabrication can begin, at Seller’s discretion.
3.
Subject to approval by Seller’s Credit Department, Buyers
can establish an “Open Account” with Seller by completing
a credit application. Lines of credit are granted or denied
based on Seller’s review of Buyer’s credit references,
the customer’s overall credit history, years in business,
financial strength and history with Seller. Orders are not
eligible for fabrication until Seller’s Credit Department has
completed a credit evaluation, approved Buyer for Open
Account status and established satisfactory payment
terms. Seller does not guarantee that all applying Buyers
will qualify for Open Account status or that Open Account
status is applicable on orders that exceed Buyer’s
established credit limit. Seller shall not be responsible
for delays due to Credit Department review. Open
Account Buyers enjoy the following privileges subject to
compliance with all other clauses contained herein.
a)
Open Account Buyers receive a maximum credit limit
under which they can order Goods without agreeing
to pay C.O.D. Payment from Open Account Buyers is
due thirty (30) days from the date of invoice. It is the
Buyer’s responsibility to know his credit limit and to
keep his total purchases under this maximum credit
limit.
b)
Open Account Buyers paying their invoice within ten
(10) days of the date of order shipment or pick up will
receive a ½ of 1% discount on Goods only, excluding
any taxes or freight.
c)
Seller, at Seller’s discretion, may waive the deposit
requirements for certain specially fabricated orders
of established Open Account Buyers.
A
S
Buyer agrees that all current obligations shall become
immediately due and payable in the event of (a) Buyer’s
failure to accept a completed order when ready for
shipment or pick-up (b) Buyer’s failure to pay debts as
they become due (c) Buyer’s failure to comply with
Seller’s credit or payment terms (d) Buyer’s dissolution,
bankruptcy, insolvency, or death (e) termination of the
contract by Buyer or Seller for any reason (f) Buyer’s
failure to provide satisfactory security or assurance for
performance of Buyer’s obligations if requested by Seller
(g) any breach or anticipatory breach of contract.
PAST DUE ACCOUNTS and DISPUTE RESOLUTION:
If Buyer fails to fulfill the terms of payment, Seller may, at his
option, defer additional order acceptance, shipment or pick-up, put
Buyer’s account on “Credit Hold” status, cancel the uncompleted
balance of the order and/or require 100% prepayment of any current
or future order. Any Open Account standing may be revoked and
reevaluated. A Buyer on Credit Hold will not be allowed to place, pick
up, or ship any order(s) until Credit Hold status has been removed by
the Seller. Any order in progress at the time an account is placed
on Credit Hold status shall be delayed until this status is removed
by the Seller. Seller will attempt to notify any Buyer who is placed
on Credit Hold status, but it is ultimately the Buyer’s responsibility to
know his account status at all times. Seller shall not be responsible
for any order, fabrication, progress or project delays resulting from
TC-2
Buyer Initials _________________
E
L
FORCE MAJEURE:
Seller shall not be liable to Buyer or to any third parties for whose
use any of Buyer’s Component Orders is intended for any penalties,
damages (whether liquidated or unliquidated), claims or any other
losses occasioned by Seller’s failure to make delivery, or delay in
making a delivery, of a Component Order when such failure or delay
results from causes or events beyond Seller’s reasonable control (a
“Force Majeure Event”), including, but not limited to, fires, floods,
storms, hurricanes, casualty losses, accidents, or other acts of
God, stress, labor disputes or difficulties, acts or requirements of
government or civil authority, riot, war, terrorism, embargo, truck
shortage or any transportation delay or difficulty, or inability to
obtain labor or raw Goods, or delayed direct shipment of Goods by
third parties, or approval drawings which are not timely returned
by Buyer or Buyer’s architect or representative.
P
WAIVER OF CONSEQUENTIAL DAMAGES:
Notwithstanding anything stated to the contrary herein, IN NO
EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL OR
CONSEQUENTIAL, INCIDENTAL, INDIRECT OR PUNITIVE DAMAGES
of any kind or character, including, but not limited to, loss of use,
loss of profit, loss of property, or loss or revenue, whenever relating
to or in connection with any Component Order.
M
Open Account Buyers must maintain good credit and
a prompt pay history to keep open account privileges.
Seller’s Credit Department reserves the right to request
and receive Buyer’s updated financial information, when
Seller’s Credit Department deems necessary, in order to
maintain Buyer’s Open Account status and credit limit.
Open Account status may be revoked, at any time, at
Seller’s discretion.
4.
an account status change to Credit Hold.
All deferred payments shall bear interest from the time they are
due until paid at the highest rate permitted by law and if collection
of the account requires any legal counsel or procedures, Buyer
agrees to pay reasonable attorney’s fees plus interest, costs and
any other damages as may be allowed by law. No failure of the
Seller to exercise any right occurring from default of the Buyer shall
impair the Seller’s rights in case of any subsequent default.
THE LAWS OF THE STATE OF TEXAS SHALL CONTROL THE VALIDITY,
CONSTRUCTION AND INTERPRETATION OF THIS CONTRACT
EXCLUDING ANY CONFLICTS OF LAWS PRINCIPLES WHICH WOULD
DIRECT THE SUBSTANTITIVE LAW OF ANOTHER JURISDICTION
TO APPLY. Buyer agrees that activities to be performed under the
Component Orders/contracts will be performed primarily in the
State of Texas and that payments are due and payable in Harris
County, Texas. Buyer agrees that venue, for all purposes of any
and all lawsuits, causes of action, arbitrations, or other methods of
resolving disputes is proper in any state or federal court in Harris
County, Texas, consents to such jurisdiction and waives any right to
transfer any action brought in any such court. If Buyer is located
in Louisiana, the parties agree to waive any right or redress under
Section 9:2779 of the Louisiana Revised Statutes as it relates to the
forum and choice of law for any Component Orders.
SECURITY INTEREST:
Buyer grants and Seller retains a security interest in the Goods to
secure payment of the contract price and all other charges due and
owing to Seller by Buyer for any Goods purchased by Buyer. This
security interest constitutes a ‘purchase money security interest’
pursuant to the Uniform Commercial Code and this document is
a contract, security agreement and financing statement between
Buyer and Seller.
LIMITED COMPONENT WARRANTY:
Seller warrants to Buyer that its Goods will be consistent with
Seller’s specifications and will be free of defects in workmanship
for one (1) year from the date the Component Order is shipped.
Claims for Goods that are defective when delivered must be
made to Seller, in writing, within ten (10) days after the date of
order shipment or pick-up, or shall be conclusively waived. With
respect to Goods purchased from third parties, Seller shall have
no warranty or other obligations with respect to such third party
Goods, but Seller hereby assigns to Buyer the right to enforce
(along with Seller) all warranties and guarantees Seller receives
from the manufacturers and suppliers of third party Goods. Buyer
can request and/or purchase additional warranties for external
paneling, exterior sloped roof panels, vertical wall panels and roof
weathertightness. The Weathertightness warranty, available on
Super Seam-II, Super Seam-Plus, Weather Snap-16 and Weather
Lok-16 standing seam roof systems must be requested and included
on the Component Order by the Buyer and approved by Seller prior
to Order Acceptance. In the event such additional warranties are
purchased and/or granted, the terms, conditions and limitations
thereof shall be expressly stated in the Warranty Certificates issued
by Seller with respect thereto. THE WARRANTIES SET FORTH IN
THIS SECTION SUPERSEDE AND ARE EXPRESSLY PROVIDED IN
PLACE OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS,
STATUTORY OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, BOTH OF
REV. 9/1/06
Terms and Conditions effective September 1, 2003
WHICH ARE HEREBY EXPRESSLY DISCLAIMED BY BUYER WITH
RESPECT TO GOODS. All warranty claims not readily discoverable
upon delivery shall be presented by Buyer, in writing, within the
term of the applicable Seller warranty period (which commences
on the date the Component Order is delivered) or within thirty (30)
days of discovery, whichever is first, to Buyer. Seller shall have the
right and shall be given reasonable time to inspect and confirm any
defect. Any Buyer replacement, repair or remedy of claimed Goods
unauthorized by Seller shall void any remaining Goods warranty
and shall be performed at the total expense of the Buyer, without
recourse. Seller will, at its option, either repair or furnish replacement
of defective Goods ex works, or without replacement, render a
reasonable credit for Goods which prove defective. Any such
warranty replacement , repair or remedy shall only be warranted
until the conclusion of the original Goods warranty term. THIS
SHALL BE THE SOLE OBLIGATION OF SELLER WITH RESPECT TO
COMPONENT ORDERS, AND BUYER SHALL BE ENTITLED TO NO
OTHER REMEDIES. Damages or Defects caused by outside sources,
including but not limited to, improper installation, improper storage
or handling, misuse or abuse, lack of proper maintenance, or normal
wear and tear are not covered under Seller’s warranties. Seller’s
warranties (except roof weathertightness) are not transferable and
not assignable beyond the original end use customer.
PREPAID FREIGHT ARRANGEMENT:
When requested by Buyer, Seller will make reasonable effort
to arrange shipments via what Seller considers, but does not
warrant, to be a reliable, insured, bonded, independent trucking
company. Freight charges will be prepaid by the Seller or added to
the Buyer’s Component Order cost at Seller’s option. SELLER SHALL
NOT BE RESPONSIBLE FOR ANY LOADING, TRANSPORTATION,
OR DELIVERY PROBLEMS, INCLUDING BUT NOT LIMITED TO,
DELIVERY DELAYS, DAMAGES TO PROPERTY, PERSONAL INJURIES
OF ANY KIND, UNLOADING EXPENSES, DEMURRAGE, OR ANY
LIQUIDATED OR CONSEQUENTIAL DAMAGES REGARDING FREIGHT
OR DELIVERY.
Buyer shall be responsible for meeting the delivery truck at the
destination, at the agreed time, and for timely unloading the truck
using Buyer’s equipment and without the delivery driver’s assistance.
All demurrage, standby, off-loading or other costs associated with
any delay in accepting delivery or unloading Component Orders
shall be paid by Buyer.
BUYER PICK-UP:
COMPLETED ORDERS NOT SHIPPED OR PICKED-UP WITHIN 30 DAYS:
Any Component Order which has not been shipped or picked-up
by Buyer within thirty (30) days of completion will be invoiced by
the Seller and the full contract price shall be due and payable by
Buyer at that time. It is acknowledged that Seller does not have
a storage area designed for long-term storage and that orders left
over thirty days from completion may be damaged or lost. Seller
shall not be responsible for any damage to, or loss of, any such
order and Buyer’s obligation to accept and/or pay the agreed price
for the order shall not be affected by any damage or loss incurred
during storage. In the event Buyer requests a repair or replacement
of any Goods damaged or lost during storage, Buyer shall pay for
the repair or replacement, cash in advance, at current prices, in
addition to the original amount due for the order. Seller shall not
be responsible for any charges due to delays, increased cost, or
additional freight incurred for the replacement order. An Order
that has not been shipped or picked-up by Buyer within sixty (60)
days of completion can be disposed of by Seller in any manner
Seller chooses, at Seller’s sole discretion, in which case Buyer
shall remain obligated to pay the agreed price. Any unpaid account
of an order fabricated and not shipped or picked-up within thirty
(30) days may be turned over to an attorney for collection of the
entire agreed price of the order, plus reasonable attorney fees
and any other interest, storage charges, costs and damages as
may be allowed by law.
A
S
E
L
BILL OF LADING:
Buyer is responsible for verifying that the Goods listed on the
Bill of Lading are received. All obvious shortages and/or damages
must be noted, in writing, on the Billing of Lading prior to Buyer,
or his receiving representative, signing the Bill of Lading. Failure
by the Buyer to document shortages of the number of packages
or notation of damages documented on the signed Bill of Lading
at the time of delivery or pick-up shall waive any claim of such
shortage and/or damage. It is the Buyer’s responsibility to retain
a copy of the Bill of Lading documenting any shortages and/or
damages. Loss of the Bill of Lading shall also waive any right to
claim any shortage and/or damage.
Buyer agrees that Buyer’s or Buyer’s representative’s loaded
vehicle will exit the Seller’s plant through the security gate. Buyer
will allow Seller’s Security Officer to video tape the load before
tarpaulins are placed over any Goods, and Buyer will verify Bill of
Lading information. This procedure protects both Buyer and Seller
by validating that the Buyer is exiting with the correct Order(s).
M
Buyer may make arrangements to pick-up Orders at Seller’s plant. It
is Buyer’s responsibility to call ahead to confirm the loading schedule
and that Buyer’s order is complete and ready for loading. Seller’s
Shipping Department normally loads on a first-come, first served
basis, beginning at 6:00 a.m., Monday through Friday (excluding
Holidays and Inventory days). Buyers picking up large orders must
be in Seller’s plant no later than 12:30 p.m. Buyers picking up
smaller orders must be in Seller’s plant no later than 3:00 p.m. All
C.O.D. Orders must be paid in full prior to loading.
Seller will load orders for pick-up, but Buyers are responsible for
sending suitable vehicles, capable of hauling the size and weight of
the Buyer’s order. Since Seller loads Goods with overhead cranes
and forklifts, a flatbed trailer without side boards is most suitable.
Seller cannot load open end, closed trailers, such as horse trailers
or export containers, and shall not be responsible for any damages
of any kind incurred during loading.
Buyer shall be responsible for providing an appropriate method
and materials for securing the Goods to the vehicle, and Buyer shall
secure the loaded Goods. Seller shall not be responsible or liable
for any damage or loss to Goods, vehicles or persons caused from
unsecured or improperly secured Goods shifting or falling from
Buyer’s vehicle during transport, or caused from Buyer rearranging
or loading of additional non-order Goods. Buyer’s vehicle or trailer
shall be empty prior to Buyer’s order being loaded. Seller will not
rearrange any pre-existing Goods on Buyer’s vehicle, and will
not allow Buyer to rearrange Goods on Seller’s premises. Seller
will not block over any pre-existing Buyer Goods in order to load
Buyer’s order on top of such pre-existing Buyer Goods. Seller may,
at their discretion, refuse to load a Buyer’s order if Seller judges
possible risk to vehicle, Goods or public safety.
Seller shall not be held responsible or financially liable for any
accidents or damages caused to vehicles, Goods, person or property
for any reason regarding loading or transporting Buyer’s Order.
Risk of loss or damage shall pass to Buyer upon commencement
of loading onto Buyer’s transportation vehicle.
Partial order pick-ups are generally discouraged and only
occasionally allowed at Seller’s discretion. Partial pick-ups shall
be pre-approved in writing, and such approval shall not release
Buyer’s financial obligation for any order balance. In cases where
partial pick-ups are part of a C.O.D. order, payment for the entire
REV. 9/1/06
order balance must be paid prior to initial pick-up. Buyer shall
be responsible for any additional freight charges resulting from
multiple pick-ups.
P
SHORTAGES & DAMAGES:
Seller shall not be liable for any damage or shortage of Goods
unless Buyer notifies Seller, in writing, within ten (10) days after
delivery or pick-up. In the event that Seller is responsible for the
shortage and/or damage, Seller will send such Goods to the delivery
address via a reasonably priced shipping method of Seller’s choice.
Seller is not obligated to send Goods via overnight airfreight or
direct hotshot truck lines unless Buyer prepays for such service.
Seller shall not be responsible or liable for delays, Buyer’s erection
crew or rental equipment costs, or any liquidated or consequential
damages of any kind relating to shortages or damages. Seller shall
not be responsible for loss or damage to Goods that occur after
delivery to the jobsite.
FABRICATION ERROR REMEDY:
Buyer shall notify Seller of any alleged fabrication errors, in
writing, within ten (10) days or shipment or pick-up and allow
Seller to investigate and confirm or deny the alleged errors or
any remedies by Seller shall be waived. Seller shall remedy all
fabrication errors Seller confirms to be Seller’s by, at Seller’s option,
either repairing or furnishing replacement Goods ex works, or by
rendering a reasonable credit for any Goods, repair or remedy.
Seller shall have no obligation to remove or dismantle defective
parts or to erect or install replacement parts. Seller shall not be
responsible for fabrication errors attributed to defective fabrication
drawings or details supplied by Buyer, or dimensions on Seller’s
issued approval drawings that have been confirmed approved by
Buyer. All fabrication errors caused by Buyer or third parties,
including but not limited to improper storage at the jobsite or improper
installation, will be the financial responsibility of the Buyer. Back
charges that are unauthorized by Seller shall be disallowed and the
Buyer’s account placed on immediate Credit Hold until resolution.
Seller shall not be responsible or financially liable for delivery delays
or any of Buyer’s costs expended on remedies unauthorized by
Seller, including but not limited to Buyer’s erection crew expense
Buyer Initials _________________
TC-3
Terms and Conditions effective September 1, 2003
or rental equipment costs or liquidated or consequential damages
of any kind relating to fabrication errors.
ITEMS SOLD AS “REJECTS” OR “SECONDS”:
Items sold using the term “Reject or “Seconds” are non-prime
blemished Goods, and are not claimable or returnable for any reason
and are sold on an “as is”, first-come, first-served basis without a
warranty of any kind.
SPECIAL ORDER GOODS:
Special Order Goods, including but not limited to non-stock panels,
trim, hardware, etc., may be subject to a 50% deposit before the
Component Order will be processed. Once Seller orders Special
Order Goods for Buyer, Buyer shall be financially liable for payment
of the sales price for such items. It is the Buyer’s responsibility to
determine which Goods are Special Order Goods. Special Order
Goods may require additional acquisition time, depending on the
specific Goods. Seller shall not be responsible for project delays
due to Special Order Goods availability and/or delivery.
GOODS TAKE-OFFS:
Seller does not offer this service in the Component Sales Division. To
keep prices as low as possible, the list of Goods required is always the
Buyer’s responsibility. Seller’s Sales personnel will offer information
on theGoods offered, but Seller shall not be responsible for a Goods
take-off.
ENGINEERING ADVICE:
Seller does not offer engineering advice through the Component
Sales Division. Section properties on panels and standard Zees
and Cees are available in Seller’s catalog so the Buyer’s Engineer
can determine the necessary design for the desired application, but
Seller shall not be responsible for any damage or injury resulting
from design problems of any kind.
COLOR MATCH / PAINT:
Buyer acknowledges that Seller’s standard colors for panels and
trim Goods may not match those colors offered by other companies
even though the color names may be the same, and may not match
Seller’s own colors that have aged. Seller, therefore, does not warrant
or represent that its colors will match those of any existing building.
Seller offers a variety of colors in a variety of paint qualities and
limited finish warranties, with information available upon request. It
is the responsibility of the Buyer to ascertain and specify which color,
quality and limited finish warranty will satisfy the Buyer’s project
requirement. Seller will not be responsible for Buyer’s selection
of color, paint quality and limited finish warranty combination. By
signing the Component Order, Buyer assumes responsibility for
Buyer’s color selection.
Seller’s standard red oxide primer is intended to be a provisional
coating for short-term field protection only. Seller is not responsible
for the standard red oxide primer’s compatibility to any finish coat
applied by the Buyer. Bundling, loading, shipping, the weather, and
Agreed to and Accepted by Buyer at Houston, Texas:
INSTALLATION:
Seller’s Goods should be installed by qualified professional steel
erectors. If Buyer is not a qualified professional steel erector, Buyer
should hire a competent erector who is trained and experienced
with installing and erecting steel building Goods safely. Seller shall
not be responsible for damages to Goods, property or injuries to
persons due to negligent or improper installation by any person.
MISCELLANEOUS:
The titles to each of the various paragraphs herein are included
for convenience or only and shall in no way define, limit, or describe
the scope or intent of this agreement.
In the event that one or more of the provisions hereof shall for
any reason be held to be invalid or unenforceable, such invalidity
or unenforceability shall not affect any other provision hereof, and
the remainder of the terms and conditions shall be construed as if
such invalid or unenforceable provision had never been contained
herein.
No oral agreement or other understanding shall in any way modify
the terms and conditions herein; written modifications, to be effective,
must be signed by both Buyer and Seller.
If Buyer is a legal entity, including, but not limited to, a corporation,
limited partnership or joint venture, Buyer represents and warrants
that this agreement and its execution have been duly authorized by
all necessary entity officers and proceedings, and Buyer represents
and warrants that persons or entities placing any Component Orders
with Seller on behalf of Buyer have been duly authorized by Buyer
to place such Orders.
In the event that Buyer’s Purchase Order and/or terms or conditions
are inconsistent with Seller’s Component Order or Terms and Conditions,
Seller’s Component Order and Terms and Conditions shall govern.
Seller will not accept, execute or be bound by Buyer’s Purchase Order
or any terms and conditions attached thereto. If Buyer’s Purchase
Order Number should appear on any Seller document(s), it is strictly
for Buyer reference only.
This agreement shall be binding upon and inure to the benefit of the
parties hereto, their respective successors and permitted assigns. In
absence of an original, a fax executed copy of this contract shall act
as an original.
M
A
S
BUYER (MUST COMPLETE ALL):
other conditions can cause abrasion and rust on primer coated
Goods which may require repair and a second coat of primer at
the expense of the Buyer. Seller shall not be responsible for the
appearance, adherence or durability of any primer or finish coat
applied by the Buyer.
Signed By: _____________________________________________
Buyer
E
L
P
The parties below acknowledge that they have read and understand
Whirlwind Steel Buildings, Inc.’s Terms and Conditions for Sales
of Goods - Component Sales Division and agree to abide by the
terms and conditions as stated.
SELLER:
Agreed to and Accepted by Seller at Houston, Texas:
By: ___________________________________________________
Whirlwind Steel Buildings, Inc.
Print Name: ____________________________________________
Title: _________________________________________________
Company Name: ________________________________________
Date: _________________________________________________
Title: _________________________________________________
Date: _________________________________________________
Whirlwind Customer Number: _____________________________
Buyer’s Present Physical Address:
______________________________________________________
______________________________________________________
TC-4
Phone: ____________________ Fax: ________________________
Buyer Initials _________________
SIGNED, FOUR-PAGE ORIGINAL SHOULD BE
RETURNED TO WHIRLWIND PRIOR TO ANY ORDER
PLACEMENT.
REV. 9/1/06
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Building Systems | Whirlwind Building Components
8234 Hansen Road • Houston, Texas 77234-5280 • (713) 946-7140
35-YEAR PAINT FINISH LIMITED WARRANTY
Whirlwind Steel Buildings, Inc. a/k/a Whirlwind Building Systems, Whirlwind Building Components, Whirlwind Technical Sales Department, (“Whirlwind”),
extends this limited warranty to the Buyer listed in the signatory below and warrants that its exterior full coat, identified as KYNAR 500® (a.k.a. KYN Colors)
colors for exterior building panels and trim (“Goods”), when applied over prime quality GALVALUME® or Hot-Dipped G90 Galvanized coated steel, will perform
as follows:
E
L
COVERAGE
This warranty applies to Goods used on wood frame buildings and on architectural, commercial, pre-engineered or residential metal buildings, which are
installed in the continental United States, Canada and Mexico.
Although it is recognized and acknowledged by Whirlwind and the Buyer assigned this warranty that most coatings, including those aforementioned, will fade
and change in appearance to some degree over a period of time in outdoor installations, and that such changes may not be uniform between surfaces not equally
exposed, Whirlwind warrants that the Goods covered by this warranty will resist natural weathering only to the extent that they will conform to the performance
standards listed below during a period of thirty-five (35) years after shipment for film integrity and a period of thirty (30) years after shipment for both chalking and
color change, provided that all conditions of this warranty are first met. Provisions (1) through (3) below apply to buildings installed north of the 15° parallel of
latitude in the northern hemisphere. Only provision (1) applies to buildings installed south of this latitude:
P
1.
Will not peel, crack, check or flake to an extent that it is apparent on ordinary outdoor visual observation by a reasonable person at a reasonable
distance from the Goods; and
2.
Vertical installations will not change color more than five (5) NBS (Hunter) units, and non-vertical installations will not change color more than seven
(7) NBS (Hunter) units following field installation. Color measurements are to be made per ASTM D-2244 and only on clean surfaces after removing
surface deposits and chalk per ASTM D-3964; and
3.
Vertical installations will not chalk more that a number eight (8) rating, and non-vertical installations will not chalk more than a number six (6) rating,
when measured per ASTM D-4214, Method A.
M
EXCEPTIONS
A
S
This is an anti-weathering limited warranty and does not apply to other causes of degradation, including but not limited to;
a.
Goods which have been scratched or abraded or impacted by a hard object; abused, altered, modified; used in a manner not originally intended or
stored contrary to Whirlwind instructions or in accordance with good industry practice; damaged due to moisture entrapment in bundles/packages
during transit or storage; stored or installed in a way which allows standing water on the coating, or in any chemically aggressive environment
containing fumes, ash, cement dust, wet cement or mortar, carbon black, salts or other chemicals, whether naturally occurring or caused by man;
stored or installed in an environment that includes a high degree of humidity, sand, dirt, or grease, whether naturally occurring or caused by man;
stored or installed in a way which allows contact with animals and/or animal waste or its decomposition products; is stored or installed in an
area, or in such a way, that damage can occur due to poor air circulation; is stored or installed in areas which are subject to fallout from copper,
lead, nickel or silver mining or refining operations; suffered any damage caused by acts of God, radiation, falling objects, explosion, fire, riots, civil
commotions, acts of war or other external forces;
b.
Goods which suffer from severe film crazing from radial bending (hems); cut edge exposure; edge creep; corrosion of the substrate; or the
development of any other condition between the coating and the substrate which causes the coating to degrade or delaminate;
c.
Goods installed within 1000 meters of a salt water or other marine environment.
d.
Goods which have suffered discoloration from the rusting of embedded or topical steel shavings which were not properly removed during the
erection process; improper insulation installation allowing moisture to remain in contact with Goods; failure to promptly remove protective masking
film.
e.
Goods which have been damaged by outside sources, improper installation, improper storage or handling, misuse or abuse, or lack of proper
maintenance.
This limited warranty applies only to the painted finish full coat and does not cover the wash coat on the reverse side, the base metal, or the metallic
substrate.
REV. 05.12.08
W-1
CLAIM PROCEDURE
Any Claim under this limited warranty shall be made to Whirlwind, in writing, within thirty (30) days after (a) discovery of the suspected defective Goods or (b)
the time a reasonable person should have discovered the defective Goods, whichever is sooner, or the Claim shall be waived. Additionally, any Claim shall
include (a) a copy of this, properly executed, warranty, and (b) a video and/or photographs of the claimed defective Goods. Whirlwind shall be given a prompt
and reasonable opportunity to inspect the installation and investigate the claim validity and, if necessary, coordinate a joint job site inspection with its supplier’s
representatives of the Goods claimed to be defective. It is Buyer’s responsibility to demonstrate, to Whirlwind and Whirlwind’s supplier’s satisfaction, that any
claimed defect was due to a breach of this limited warranty.
REMEDY
Remedy shall be by either Goods replacement or Goods refinishing of the defective portion of the field installation only, in accordance with standard industry
practice, F.O.B. Buyer’s job site. Buyer acknowledges that this limited warranty is derived from the limited warranty issued by Whirlwind’s supplier to Whirlwind,
which Whirlwind is passing on to Buyer. Accordingly, any remedy is subject to Whirlwind’s supplier’s decision to accept the Claim and the authorization and
choice of remedy for any accepted Claim shall rest solely with Whirlwind’s supplier. In no event shall the Buyer be eligible to receive greater remedy from
Whirlwind than the remedy Whirlwind receives from its supplier.
E
L
P
Any unauthorized efforts by Buyer to remedy the alleged defective Goods shall void this warranty.
ADDITIONAL WARRANTY LIMITATIONS
THIS LIMITED WARRANTY SUPERSEDES AND IS EXPRESSLY PROVIDED IN PLACE OF ANY AND ALL OTHER WARRANTIES REGARDING THE GOODS,
WHETHER EXPRESS, STATUTORY OR IMPLIED INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED BY BUYER.
WHIRLWIND SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER. The
remedies set forth herein are exclusive.
Any portion of Goods replaced or refinished pursuant to this limited warranty shall be deemed to have been coated on the date of the original installation and
the duration of this warranty shall not be extended beyond that of the original factory-applied finish.
Buyer shall exercise diligence in inspection of Goods as received from Whirlwind so as to mitigate repair of replacement. No warranty shall apply to Goods
which are used and contain painted finish defects discernable by reasonable inspection.
This limited warranty applies only when specifically requested by the Buyer, in writing, within 60 days of shipment after full payment has been received by
Whirlwind. It shall not apply to painted finish metal used for a purpose other than exterior building panels or to orders not designated in writing by the Buyer
as limited warranty orders.
M
Whirlwind extends this limited warranty solely to the Buyer. This limited warranty is transferable and/or assignable exclusively to the original occupant/end
user/owner of the building and is not transferable or assignable to any subsequent occupant. This limited warranty does not apply to any failure or defect that
occurs after the sale or transfer of a building by the building’s original owner.
A
S
BUYER: _________________________________
By: _____________________________________
Title: ____________________________________
Whirlwind Sales Order: _____________________
Date Shipped: ____________________________
ORIGINAL OCCUPANT/END USER
Name/Company: ________________________________
Building Location – Exact Street Address:
S t r e e t : ________________________________________
C i t y : __________________________________________
Erection Complete Date: ____________________
State/Zip: ______________________________________
Date Signed: _____________________________
Phone: ________________________________________
Whirlwind Steel Buildings, Inc.
By: _____________________________________
Name: __________________________________
Title: ___________________________________
Date: ___________________________________
THIS LIMITED WARRANTY IS NOT IN FORCE UNTIL RECEIPT OF THE FULLY-EXECUTED COPY HAS BEEN ACKNOWLEDGED BY WHIRLWIND.
W-2
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Building Systems | Whirlwind Building Components
8234 Hansen Road • Houston, Texas 77234-5280 • (713) 946-7140
40-YEAR PAINT FINISH LIMITED WARRANTY
Whirlwind Steel Buildings, Inc. a/k/a Whirlwind Building Systems, Whirlwind Building Components, Whirlwind Technical Sales Department, (“Whirlwind”),
extends this limited warranty to the Buyer listed in the signatory below and warrants that its exterior full coat, identified as Siliconized Modified Polyester (a.k.a.
SMP Colors) or Straight Polyester (a.k.a. POL Colors) colors for exterior building panels and trim (“Goods”), when applied over prime quality GALVALUME® or
Hot-Dipped G90 Galvanized coated steel, will perform as follows:
E
L
COVERAGE
This warranty applies to Goods used on wood frame buildings and on architectural, commercial, pre-engineered or residential metal buildings, which are
installed in the continental United States, Canada and Mexico.
Although it is recognized and acknowledged by Whirlwind and the Buyer assigned this warranty that most coatings, including those aforementioned, will fade
and change in appearance to some degree over a period of time in outdoor installations, and that such changes may not be uniform between surfaces not equally
exposed, Whirlwind warrants that the Goods covered by this warranty will resist natural weathering only to the extent that they will conform to the performance
standards listed below during a period of forty (40) years after shipment for film integrity and a period of twenty-five (25) years after shipment for both chalking
and color change, provided that all conditions of this warranty are first met. Provisions (1) through (3) below apply to buildings installed north of the 15° parallel
of latitude in the northern hemisphere. Only provision (1) applies to buildings installed south of this latitude:
P
1.
Will not peel, crack, check or flake to an extent that it is apparent on ordinary outdoor visual observation by a reasonable person at a reasonable
distance from the Goods; and
2.
Vertical installations will not change color more than five (5) NBS (Hunter) units, and non-vertical installations will not change color more than seven
(7) NBS (Hunter) units following field installation. Color measurements are to be made per ASTM D-2244 and only on clean surfaces after removing
surface deposits and chalk per ASTM D-3964; and
3.
Vertical installations will not chalk more than a number eight (8) rating, and non-vertical installations will not chalk more than a number six (6) rating,
when measured per ASTM D-4214, Method A.
M
EXCEPTIONS
A
S
This is an anti-weathering limited warranty and does not apply to other causes of degradation, including but not limited to;
a.
Goods which have been scratched or abrased or impacted by a hard object; abused, altered, modified; used in a manner not originally intended;
or stored contrary to Whirlwind instructions or good industry practice; damaged due to moisture entrapment in bundles/packages during transit or
storage; stored or installed in a way which allows standing water on the coating, or in any chemically aggressive environment containing fumes,
ash, cement dust, wet cement or mortar, carbon black, salts or other chemicals, whether naturally occurring or caused by man; stored or installed
in an environment that includes a high degree of humidity, sand, dirt, or grease, whether naturally occurring or caused by man; stored or installed in
a way which allows contact with animals and/or animal waste or its decomposition products; is stored or installed in an area, or in such a way, that
damage can occur due to poor air circulation; is stored or installed in areas which are subject to fallout from copper, lead, nickel or silver mining
or refining operations; suffered any damage caused by acts of God, radiation, falling objects, explosion, fire, riots, civil commotions, acts of war or
other external forces;
b.
Goods which suffer from severe film crazing from radial bending (hems); cut edge exposure; edge creep; corrosion of the substrate; or the
development of any other condition between the coating and the substrate which causes the coating to degrade or delaminate;
c.
Goods installed within 1000 meters of a salt water or other marine environment.
d.
Goods which have suffered discoloration from the rusting of embedded or topical steel shavings which were not properly removed during the
erection process; improper insulation installation allowing moisture to remain in contact with Goods; failure to promptly remove protective masking
film.
e.
Goods which have been damaged by outside sources, improper installation, improper storage or handling, misuse or abuse, or lack of proper
maintenance.
This limited warranty applies only to the painted finish full coat and does not cover the wash coat on the reverse side, the base metal, or the metallic
substrate.
REV. 05.12.08
W-3
CLAIM PROCEDURE
Any Claim under this limited warranty shall be made to Whirlwind, in writing, within thirty (30) days after (a) discovery of the suspected defective Goods or (b)
the time a reasonable person should have discovered the defective Goods, whichever is sooner, or the Claim shall be waived. Additionally, any Claim shall
include (a) a copy of this, properly executed, warranty, and (b) a video and/or photographs of the claimed defective Goods. Whirlwind shall be given a prompt
and reasonable opportunity to inspect the installation and investigate the claim validity and, if necessary, coordinate a joint job site inspection with its supplier’s
representatives of the Goods claimed to be defective. It is Buyer’s responsibility to demonstrate, to Whirlwind and Whirlwind’s supplier’s satisfaction, that any
claimed defect was due to a breach of this limited warranty.
REMEDY
Remedy shall be by either Goods replacement or Goods refinishing of the defective portion of the field installation only, in accordance with standard industry
practice, F.O.B. Buyer’s job site. Buyer acknowledges that this limited warranty is derived from the limited warranty issued by Whirlwind’s supplier to Whirlwind,
which Whirlwind is passing on to Buyer. Accordingly, any remedy is subject to Whirlwind’s supplier’s decision to accept the Claim and the authorization and
choice of remedy for any accepted Claim shall rest solely with Whirlwind’s supplier. In no event shall the Buyer be eligible to receive greater remedy from
Whirlwind than the remedy Whirlwind receives from its supplier.
E
L
P
Any unauthorized efforts by Buyer to remedy the alleged defective Goods shall void this warranty.
ADDITIONAL WARRANTY LIMITATIONS
THIS LIMITED WARRANTY SUPERSEDES AND IS EXPRESSLY PROVIDED IN PLACE OF ANY AND ALL OTHER WARRANTIES REGARDING THE GOODS,
WHETHER EXPRESS, STATUTORY OR IMPLIED INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED BY BUYER.
WHIRLWIND SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER. The
remedies set forth herein are exclusive.
Any portion of Goods replaced or refinished pursuant to this limited warranty shall be deemed to have been coated on the date of the original installation and
the duration of this warranty shall not be extended beyond that of the original factory-applied finish.
Buyer shall exercise diligence in inspection of Goods as received from Whirlwind so as to mitigate repair of replacement. No warranty shall apply to Goods
which are used and contain painted finish defects discernable by reasonable inspection.
This limited warranty applies only when specifically requested by the Buyer, in writing, within 60 days of shipment after full payment has been received by
Whirlwind. It shall not apply to painted finish metal used for a purpose other than exterior building panels or to orders not designated in writing by the Buyer
as limited warranty orders.
M
Whirlwind extends this limited warranty solely to the Buyer. This limited warranty is transferable and/or assignable exclusively to the original occupant/end
user/owner of the building and is not transferable or assignable to any subsequent occupant. This limited warranty does not apply to any failure or defect that
occurs after the sale or transfer of a building by the building’s original owner.
A
S
BUYER: _________________________________
By: _____________________________________
Title: ____________________________________
Whirlwind Sales Order: _____________________
Date Shipped: ____________________________
ORIGINAL OCCUPANT/END USER
Name/Company: ________________________________
Building Location – Exact Street Address:
S t r e e t : ________________________________________
C i t y : __________________________________________
Erection Complete Date: ____________________
State/Zip: ______________________________________
Date Signed: _____________________________
Phone: ________________________________________
Whirlwind Steel Buildings, Inc.
By: _____________________________________
Name: __________________________________
Title: ___________________________________
Date: ___________________________________
THIS LIMITED WARRANTY IS NOT IN FORCE UNTIL RECEIPT OF THE FULLY-EXECUTED COPY HAS BEEN ACKNOWLEDGED BY WHIRLWIND.
W-4
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Building Systems | Whirlwind Building Components
8234 Hansen Road • Houston, Texas 77234-5280 • (713) 946-7140
10-YEAR PAINT FINISH LIMITED WARRANTY
Whirlwind Steel Buildings, Inc. a/k/a Whirlwind Building Systems, Whirlwind Building Components, Whirlwind Technical Sales Department, (“Whirlwind”),
extends this limited warranty to the Buyer listed in the signatory below and warrants that its exterior full coat, identified as Commodity (a.k.a. COM Colors) colors
for exterior building panels (“Goods”), when applied over prime quality Hot-Dipped G60 Galvanized coated steel, will perform as follows:
E
L
COVERAGE
This warranty applies to Goods used on wood frame buildings and on architectural, commercial, pre-engineered or residential metal buildings, which are
installed in the continental United States, Canada and Mexico.
Although it is recognized and acknowledged by Whirlwind and the Buyer assigned this warranty that most coatings, including those aforementioned, will fade
and change in appearance to some degree over a period of time in outdoor installations, and that such changes may not be uniform between surfaces not equally
exposed, Whirlwind warrants that the Goods covered by this warranty will resist natural weathering only to the extent that they will conform to the performance
standards listed below during a period of ten (10) years after shipment for film integrity and a period of ten (10) years after shipment for both chalking and color
change, provided that all conditions of this warranty are first met. Provisions (1) through (3) below apply to buildings installed north of the 15° parallel of latitude
in the northern hemisphere. Only provision (1) applies to buildings installed south of this latitude:
P
1.
Will not peel, crack, check or flake to an extent that it is apparent on ordinary outdoor visual observation by a reasonable person at a reasonable
distance from the Goods; and
2.
Vertical installations will not change color more than five (5) NBS (Hunter) units, and non-vertical installations will not change color more than seven
(7) NBS (Hunter) units following field installation. Color measurements are to be made per ASTM D-2244 and only on clean surfaces after removing
surface deposits and chalk per ASTM D-3964; and
3.
Vertical installations will not chalk more that a number eight (8) rating, and non-vertical installations will not chalk more than a number six (6) rating,
when measured per ASTM D-4214, Method A.
M
EXCEPTIONS
A
S
This is an anti-weathering limited warranty and does not apply to other causes of degradation, including but not limited to;
REV. 05.12.08
a.
Goods which have been scratched or abraded or impacted by a hard object; abused, altered, modified; used in a manner not originally intended;
stored contrary to Whirlwind instructions or in accordance with good industry practice; damaged due to moisture entrapment in bundles/packages
during transit or storage; stored or installed in a way which allows standing water on the coating, or in any chemically aggressive environment
containing fumes, ash, cement dust, wet cement or mortar, carbon black, salts or other chemicals, whether naturally occurring or caused by man;
stored or installed in an environment that includes a high degree of humidity, sand, dirt, or grease, whether naturally occurring or caused by man;
stored or installed in a way which allows contact with animals and/or animal waste or its decomposition products; is stored or installed in an
area, or in such a way, that damage can occur due to poor air circulation; is stored or installed in areas which are subject to fallout from copper,
lead, nickel or silver mining or refining operations; suffered any damage caused by acts of God, radiation, falling objects, explosion, fire, riots, civil
commotions, acts of war or other external forces;
b.
Goods which suffer from cut edge exposure; edge creep; corrosion of the substrate; or the development of any other condition between the coating
and the substrate which causes the coating to degrade or delaminate;
c.
Goods installed within 1000 meters of a salt water or other marine environment.
d.
Goods which have suffered discoloration from the rusting of embedded or topical steel shavings which were not properly removed during the
erection process; improper insulation installation allowing moisture to remain in contact with Goods; failure to promptly remove protective masking
film.
e.
Goods which have been damaged by outside sources, improper installation, improper storage or handling, misuse or abuse, or lack of proper
maintenance.
W-5
CLAIM PROCEDURE
Any Claim under this limited warranty shall be made to Whirlwind, in writing, within thirty (30) days after (a) discovery of the suspected defective Goods or (b)
the time a reasonable person should have discovered the defective Goods, whichever is sooner, or the Claim shall be waived. Additionally, any Claim shall
include (a) a copy of this, properly executed, warranty, and (b) a video and/or photographs of the claimed defective Goods. Whirlwind shall be given a prompt
and reasonable opportunity to inspect the installation and investigate the claim validity and, if necessary, coordinate a joint job site inspection with its supplier’s
representatives of the Goods claimed to be defective. It is Buyer’s responsibility to demonstrate, to Whirlwind and Whirlwind’s supplier’s satisfaction, that any
claimed defect was due to a breach of this limited warranty.
REMEDY
Remedy shall be by either Goods replacement or Goods refinishing of the defective portion of the field installation only, in accordance with standard industry
practice, F.O.B. Buyer’s job site. Buyer acknowledges that this limited warranty is derived from the limited warranty issued by Whirlwind’s supplier to Whirlwind,
which Whirlwind is passing on to Buyer. Accordingly, any remedy is subject to Whirlwind’s supplier’s decision to accept the Claim and the authorization and
choice of remedy for any accepted Claim shall rest solely with Whirlwind’s supplier. In no event shall the Buyer be eligible to receive greater remedy from
Whirlwind than the remedy Whirlwind receives from its supplier.
E
L
P
Any unauthorized efforts by Buyer to remedy the alleged defective Goods shall void this warranty.
ADDITIONAL WARRANTY LIMITATIONS
THIS LIMITED WARRANTY SUPERSEDES AND IS EXPRESSLY PROVIDED IN PLACE OF ANY AND ALL OTHER WARRANTIES REGARDING THE GOODS,
WHETHER EXPRESS, STATUTORY OR IMPLIED INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED BY BUYER.
WHIRLWIND SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER. The
remedies set forth herein are exclusive.
Any portion of Goods replaced or refinished pursuant to this limited warranty shall be deemed to have been coated on the date of the original installation and
the duration of this warranty shall not be extended beyond that of the original factory-applied finish.
Buyer shall exercise diligence in inspection of Goods as received from Whirlwind so as to mitigate repair of replacement. No warranty shall apply to Goods
which are used and contain painted finish defects discernable by reasonable inspection.
This limited warranty applies only when specifically requested by the Buyer, in writing, within 60 days of shipment after full payment has been received by
Whirlwind. It shall not apply to painted finish metal used for a purpose other than exterior building panels or to orders not designated in writing by the Buyer
as limited warranty orders.
M
Whirlwind extends this limited warranty solely to the Buyer. This limited warranty is transferable and/or assignable exclusively to the original occupant/end
user/owner of the building and is not transferable or assignable to any subsequent occupant. This limited warranty does not apply to any failure or defect that
occurs after the sale or transfer of a building by the building’s original owner.
A
S
BUYER: _________________________________
By: _____________________________________
Title: ____________________________________
Whirlwind Sales Order: _____________________
Date Shipped: ____________________________
ORIGINAL OCCUPANT/END USER
Name/Company: ________________________________
Building Location – Exact Street Address:
S t r e e t : ________________________________________
C i t y : __________________________________________
Erection Complete Date: ____________________
State/Zip: ______________________________________
Date Signed: _____________________________
Phone: ________________________________________
Whirlwind Steel Buildings, Inc.
By: _____________________________________
Name: __________________________________
Title: ___________________________________
Date: ___________________________________
THIS LIMITED WARRANTY IS NOT IN FORCE UNTIL RECEIPT OF THE FULLY-EXECUTED COPY HAS BEEN ACKNOWLEDGED BY WHIRLWIND.
W-6
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Building Systems | Whirlwind Building Components
8234 Hansen Road • Houston, Texas 77234-5280 • (713) 946-7140
25-YEAR ACRYLIC-COATED GALVALUME® FINISH LIMITED WARRANTY
Whirlwind Steel Buildings, Inc. a/k/a Whirlwind Building Systems, Whirlwind Building Components, Whirlwind Technical Sales Department, (“Whirlwind”),
extends this limited warranty to the Buyer listed in the signatory below and warrants that its goods identified as acrylic-coated GALVALUME® (a.k.a.
GALVALUME PLUS®, ACRYLUME® or ZINCALUME®, among others) with a coating weight of AZ55, used for unpainted exterior building roofing and siding
panels and trim (“Goods”), will perform as follows:
E
L
COVERAGE
This warranty applies to Goods used on wood frame buildings and on architectural, commercial, pre-engineered or residential metal buildings, which are
installed in the continental United States, Canada and Mexico.
The term of coverage for this limited warranty shall be for a period of twenty-five (25) years after Goods shipment from Whirlwind.
Acrylic-coated GALVALUME®, when exposed to normal atmospheric conditions, will not, as a result of corrosion, fail structurally, perforate or rupture within
the term of coverage, subject to the following exceptions and provisions:
EXCEPTIONS
This limited warranty DOES NOT APPLY to Goods exposed at any time to corrosive, aggressive, harmful or other abnormal atmospheric conditions, including,
but not limited to, the conditions present in the following areas or circumstances:
P
1.
Areas subject to salt-water marine atmospheres or to repeated spraying of salt or fresh water, stored or installed in an environment that
includes a high degree of humidity, sand, dirt, or grease, whether naturally occurring or caused by man;
2.
Goods installed within 1000 meters of a salt-water or other marine environment.
3.
Areas subject to fallout of, or exposure to, corrosive chemicals, ash fumes, cement dust, or contact with animals and/or animal waste or its
decomposition products, wet cement or mortar, green or wet lumber, carbon black, salts or other chemicals, whether naturally occurring
or caused by man;
4.
Areas subject to water run-off from lead or copper flashings, or to areas in metallic contact with lead or copper or installed in areas which
are subject to fallout from copper, lead, nickel or silver mining or refining operations.
5.
Circumstances where corrosive fumes or condensates are generated or released inside the building.
1.
2.
3.
4.
5.
6.
7.
M
A
S
This limited warranty DOES NOT APPLY in the event of:
Goods which have been scratched or abraded or impacted by a hard object or improper scouring or cleaning procedures; abused, altered,
modified; used in a manner not originally intended; stored contrary to Whirlwind instructions or good industry practice; damaged or stained
due to moisture entrapment in bundles/packages during transit or storage; stored or installed in a way which allows standing water on the
coating, is stored or installed in a way which allows; is stored or installed in an area, or in such a way, that damage can occur due to poor air
circulation; is stored; has suffered any damage caused by acts of God, radiation, falling objects, explosion, fire, riots, civil commotions, acts
of war or other external forces;
Goods which suffer from severe crazing from radial bending (hems), cut edge exposure or edge creep.
Goods which have suffered discoloration or corrosion from the rusting of embedded or topical steel shavings which were not properly
removed during the erection process; improper insulation installation allowing moisture to remain in contact with Goods; Goods in direct
contact with the concrete foundation.
Goods which have been damaged by outside sources, improper installation, improper storage or handling, misuse or abuse, or lack of
proper maintenance.
Deterioration of the panels caused directly or indirectly by panel contact with fasteners. Selection and specification of suitable long-life
fasteners to be used with Goods rests solely with the Buyer.
Non-vertical slopes of roof or sections on the roof flatter than ¼:12 or any other circumstances that cause improper drainage or the holding
of water, including internal condensation, from overlaps and all other surfaces of the Goods.
Discoloration of the clear acrylic finish.
This limited warranty applies only to the GALVALUME® metallic coating and does not cover the clear acrylic coating.
REV. 05.12.08
W-7
CLAIM PROCEDURE
Any Claim under this limited warranty shall be made to Whirlwind, in writing, within thirty (30) days after (a) discovery of the suspected defective Goods or
(b) the time a reasonable person should have discovered the defective Goods, whichever is sooner, or the Claim shall be waived. Additionally, any Claim
shall include (a) a copy of this, properly executed, warranty, and (b) a video and/or photographs of the claimed defective Goods. Whirlwind shall be given
a prompt and reasonable opportunity to inspect the installation and investigate the claim validity and, if necessary, coordinate a joint job site inspection
with its supplier’s representatives of the Goods claimed to be defective. It is Buyer’s responsibility to demonstrate, to Whirlwind and Whirlwind’s supplier’s
satisfaction, that any claimed defect was due to a breach of this limited warranty.
REMEDY
Remedy shall be by Goods replacement F.O.B. Buyer’s job site. Buyer acknowledges that this limited warranty is derived from the limited warranty issued by
Whirlwind’s supplier to Whirlwind, which Whirlwind is passing on to Buyer. Accordingly, any remedy is subject to Whirlwind’s supplier’s decision to accept the
Claim and the authorization and choice of remedy for any accepted Claim shall rest solely with Whirlwind’s supplier. In no event shall the Buyer be eligible to
receive greater remedy from Whirlwind than the remedy Whirlwind receives from its supplier.
E
L
P
Any unauthorized efforts by Buyer to remedy the alleged defective Goods shall void this warranty.
ADDITIONAL WARRANTY LIMITATIONS
THIS LIMITED WARRANTY SUPERSEDES AND IS EXPRESSLY PROVIDED IN PLACE OF ANY AND ALL OTHER WARRANTIES REGARDING THE GOODS,
WHETHER EXPRESS, STATUTORY OR IMPLIED INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED BY BUYER.
WHIRLWIND SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER. The
remedies set forth herein are exclusive.
Any portion of Goods replaced under this limited warranty shall be deemed to have been supplied on the date of the original installation and the duration of
this warranty shall not be extended beyond that of the original Goods shipment.
Buyer shall exercise diligence in inspection of Goods as received from Whirlwind so as to mitigate repair of replacement. No warranty shall apply to Goods
which are used and contain defects discernable by reasonable inspection.
This limited warranty applies only when specifically requested by the Buyer, in writing, within 60 days of shipment after full payment has been received by Whirlwind.
It shall not apply to acrylic-coated GALVALUME® finish metal used for a purpose other than exterior building panels or to orders not designated in writing by the
Buyer as limited warranty orders.
M
Whirlwind extends this limited warranty solely to the Buyer. This limited warranty is transferable and/or assignable exclusively to the original occupant/end
user/owner of the building and is not transferable or assignable to any subsequent occupant. This limited warranty does not apply to any failure or defect
that occurs after the sale or transfer of a building by the building’s original owner.
BUYER: _________________________________
A
S
By: _____________________________________
Title: ____________________________________
Whirlwind Sales Order: _____________________
Date Shipped: ____________________________
Erection Complete Date: ____________________
Date Signed: _____________________________
ORIGINAL OCCUPANT/END USER
Name/Company: ________________________________
Building Location – Exact Street Address:
S t r e e t : ________________________________________
C i t y : __________________________________________
State/Zip: ______________________________________
Phone: ________________________________________
Whirlwind Steel Buildings, Inc.
By: _____________________________________
Name: __________________________________
Title: ___________________________________
Date: ___________________________________
THIS LIMITED WARRANTY IS NOT IN FORCE UNTIL RECEIPT OF THE FULLY-EXECUTED COPY HAS BEEN ACKNOWLEDGED BY WHIRLWIND.
W-8
CERTIFICATE FOR U.L. CLASS 60 U.L. CLASS 90
ROOF DECK ASSEMBLY
Owner:
Address:
File No.:
E
L
E
PL
P
M
A
M
SA
S
This CERTIFIES that the roof deck assembly on the building indicated above has been designed and
fabricated according to specifications for
Class
Construction No
as prescribed in the Underwriter's
Laboratories Building Material List, and has been anchored to the building in accordance with good
engineering practices.
Name:
Title:
Manufacturer/Authorized Representative
Address:
8234 Hansen Road
City
Zip Code:
Whirlwind Steel Buildings, Inc.
Houston
State
TX
Date
77075
This CERTIFIES that the roof deck assemble on the building indicated above has been installed and
anchored to the building according to good engineering practices and specifications for
Class
Construction No
as prescribed in the Underwriter's
Laboratories Building Material List.
Name:
Title:
Manufacturer/Authorized Representative
Address:
City
State
Zip Code:
Date
Art 12.47, Texas Insurance Code: "Any person who knowingly or willfully makes, files or uses any
instrument in writing required to be made to or filed with the State Board of Insurance or the Insurance
Commissioner, either by the Insurance Code or by rule or regulation of the State Board of Insurance,
when the instrument in writing contains any false, fictions or fraudulent statement or entry with regard to
any material fact, shall be fined not more than $5,000 or imprisoned for not more than five years in the
State penitentiary, or both."
www.whirlwindsteel.com
REV. 09/01/2003
C-1
ENERGY STAR
CERTIFICATION
This document is issued by Whirlwind Steel Buildings, Inc. to certify that the painted metal roof panels provided, meet the
tax credit requirements for non-business energy property under § 25C of the Internal Revenue Code for a roof slopes > 2:12.
The colors and finishes listed below meet or exceed the steep slope (>2:12) Aged Reflectivity requirements as listed on the
Energy Star web page www.Energystar.gov.
E
E
L
L
P
P
M
M
A
A
S
S
Energy Star Listings:
Ceram-A-Star 950 Paint finish
Color
Sahara Tan
Colonial Red
Lightstone
Old Town Gray
Colony Green
Aspen Green
Surfsand
Cool White®
Free White
Aged Thermal Reflectivity
0.36
0.30
0.51
0.28
0.35
0.30
0.31
0.73
0.72
Trinar Paint Finish
Color
Polar White
Ash Gray
Aztec Gold
Surfsand
Solar White
Aged Thermal Reflectivity
0.57
0.39
0.46
0.34
0.70
Under penalty of perjury, I declare that I have examined this certification statement and to the best of my knowledge and
belief, the facts are true, correct and complete.
David Fulton
VP Research & Developement
Date
WHIRLWIND STEEL BUILDINGS, INC.
Whirlwind Building Systems | Whirlwind Building Components
C-2
TEXAS
GEORGIA
OKLAHOMA
MINNESOTA
8234 Hansen Rd.
Houston, TX 77075
713.946.7140 Phone
832.553.4700 Fax
800.324.9992 US Wats
2175 Sweetwater Industrial Blvd.
Lithia Springs, GA 30122-2879
770.739.8339 Phone
770.739.1226 Fax
800.363.8142 US Wats
2450 E.L. Anderson Blvd.
Claremore, OK 74017-2122
918.343.1973 Phone
918.343.7114 Fax
877.875.0077 US Wats
500 Whirlwind Drive
Freeport, MN 56331-0007
320.836.7200 Phone
320.836.7201 Fax
888.836.7203 US Wats