HARD - IQnection Control Panel

Transcription

HARD - IQnection Control Panel
MILITARY HELICOPTERS
FLOTATION - SURVIVAL - RESCUE
Manufacture • Distribute • Repair • Recertification
• FAA Certified • ISO 9001:2008 Certified • AS 9100 Certified
• HARD-20™ Life Raft
• HARD™ Life Rafts
• Personal Locator Beacons
• LRU-18 One-Person Raft
• MK-III™ Rescue Seat
• FAA/Mil-Spec Life Rafts
• MK-46 SV Life Preserver
• Aircrew Harness
• HARD-4™ Life Rafts
• Hoist Accessories
• Survival Kits & Accessories • Rescue Equipment
For
more
information,
see
our
website
or
contact
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
us
direct
MK-III RESCUE SEAT
GS-07F-0359U
Available on
GSA Contract
Three-Prong Seat provides
balance, comfort and support.
The MK-III Forest Penetrator/ Rescue Seat is designed to
extract personnel in any terrain. The rescue seat is intended
to hoist one person but is capable of lifting three people in
emergencies.
• THICK FOREST PENETRATIONS
Simple attachment of a weighted shaped slug allows the
seat to penetrate through dense foilage.
• OVER-WATER OPERATIONS
A detachable puncture resistant Flotation Collar
provides flotation in all sea conditions.
• SIMPLICITY
The three collapsible seats are extended or retracted
by easy one handed pressure - no latches or levers
to confuse the survivor.
• RETENTION
Retention straps are provided for each seat & are routed
around survivors chest and secured to the penetrator.
• MAINTENANCE FREE
All parts are manufactured with aircraft grade aluminum
resulting in long life cycle, minimum care & maintenance.
• COMPACT
In the stowed position, the rescue seat is just 9 "x 35"
long. The seat measures 25" in diameter when all three
seats are extended.
• LIGHTWEIGHT
The Rescue Seat weighs less than 20 pounds.
MK-III RESCUE SEAT P/N: RES-1201-00
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
MK-III RESCUE SEAT SPECIFICATIONS
LSI P/N: RES-1201-00
Capacity
• Recommended 1 or 2 persons
• Max. 3 persons - NTE 500 lbs
Flotation Collar
• Buoyancy: 30 Lbs
• Diameter: 7"
Restraint Straps
• Capacity: 2,500 Lbs
• Length: 72"
NEW!
SEAT ARM
PROTECTIVE
PADS
Dimensions
• Overall Length: 35"
• Diameter folded: 9"
• Diameter legs extended: 25"
• Weight: 19 lbs
• Folding seat arms: 3 ea 12" x 3"
Construction
• Safety Straps MIL-W-27265 TY XIII
• Corrosion resistant 304 Stainless Steel
• All stainless steel parts are electro-coated
with a black finish.
NEW!
END CAP MODIFICATION
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
HARD™
L
M
EM
TE
YSST
T SSY
FT
AF
RA
ER
FE
LIIF
“Soldier Proof”
HARD™ LIFERAFT SYSTEM - HELICOPTER AIR DROPPABLE RESCUE DEVICE
The HARD™ Life Raft System is designed to provide total protection of the onboard life raft. It is
rigged for air drop capability, enabling the aircrew to also use the raft for rescues of others in water.
The concept was initially designed for the US Special Forces 160th SOAR(A) on board MH-47 Chinhook
helicopter, however the HARD™ Life Raft System can be easily modified for other aircraft
applications.
FEATURES
 RUGGED CANISTER
 AIR-DROPPABLE FOR
RESCUE
 ENVIRONMENTALLY
PACKED
 SURVIVAL KIT
(OPTIONAL)
EXISTING ENVIRONMENT
HARD ADVANTAGES:
♦ Capable of deployment by one
person via single-point release
♦ Easily transported by 1 or 2
persons
♦ Life Raft is protected from
Existing Milspec life raft
exposure to foreign matter,
configurations are ineffective for
abrasions, & punctures.
many reasons
♦ Life Raft environmentally
♦ Cumbersome to install
packaged to decrease
ENVIRONMENATAL PACKING
♦ Present hazard to aircrew in
maintenance cycles & costs
ADVANTAGES
event of crash if not secured to
♦ Reduced volume
♦ Reduced Bulk
bulkhead correctly
♦ Life Raft can be removed/
♦ Reduced maintenance frequency
♦ Aircrew typically secure life rafts
installed in aircraft without the use
♦ Improved Storage
using bungee to shock cords
of special tools by one person.
♦ Long Term Storage
preventing quick easy access in the
♦ Life Raft canister clearly marked
♦ Replacement Cost Savings
event of emergency.
for proper ID & operation of the raft
♦ Soft valise easily damaged
for manual deployment

SINGLE-POINT RELEASE
♦ Soft valise not set up for air-drop
rescue purposes
Life Support International, Inc.
200 Rittenhouse Circle, Bldg 4 West, Bristol, PA, 19007 USA
Tel: 215-785-2870 | Fax: 215-785-2880 | www.lifesupportintl.com
SOLUTIONS
FOR SURVIVAL
HARD™
L
M
EM
TE
YSST
T SSY
FT
AF
RA
ER
FE
LIIF
“Soldier Proof”
HARD™ CONFIGURATIONS:
HARD -20™
LSI P/N: FLO-4105-AD
Rugged Canister, 20-Man LRU-15/A vacuum packed life raft,
static line deployment system, manual inflation handle
HARD-7(S) ™
LSI P/N: FLO-3330-AD
Rugged Canister, 7-Man LRU-13/A Life Raft, environmentally
packaged, manual inflation, unique ripcord opening system,
and Survival kit assembled IAW Navair 13-1-6.1-1.
HARD 7-10™
LSI P/N: FLO-4370-HD
TSO Approval Pending, Rugged Canister, 7-10 Man TSO approved
Life Raft (R1500-101), Single-point release, Survival Kit – FAR 121 Kit.
HARD 6-9™
LSI P/N: FLO-4360-HD
Rugged Canister, 6-9 Man Multi-Place Life Raft (MPLR) LRU-35/B,
MIL-PRF-18494, Integrated single-point release, manual inflation,
with Survival Kit
HARD-4™
LSI P/N: FLO-4300-HD
TSO Approval Pending, Rugged Canister, T4 4-Man TSO approved
Life Raft (R1500-101), Single-point release, Survival Kit – FAR 121 Kit.
Life Support International, Inc.
200 Rittenhouse Circle, Bldg 4 West, Bristol, PA, 19007 USA
Tel: 215-785-2870 | Fax: 215-785-2880 | www.lifesupportintl.com
SOLUTIONS
FOR SURVIVAL
HARD 6™
M
M
EM
TE
YSST
T SSY
FT
AF
RA
ER
FE
LIIF
EL
CE
AC
LA
PL
TII--P
LT
UL
MU
P/N: 906003
LRU-35/B Life Raft, 6-9 Man MPLR
Configuration Feature: Rigid case, Single-point release
The HARD-6 is a unique Life Raft System, designed to provide total protection of the onboard life raft. It
may be rigged for air drop capability enabling the aircrew to also use the raft for rescue of others in the
water.
SOLUTIONS
FOR SURVIVAL
LRU-35/B Life Raft, 6-9 Man Multi-place Life Raft (MPLR)
HARD 6™ Life Raft System, P/N 906003
Specifications
P/N: 906003
Life Raft, LRU-35/B – 6-9 Man (MPLR)
*Replacement for the Military, LRU-13, 7 Man Life Raft
- 6-9 Person Capacity
-Environmentally Packaged
-Features: Twin Tube, Self-erecting canopies, Boarding Ramp,
Insulated Floor.
-Overload Capacity: 9 Person
-Rugged Canister
-Integrated Single-point Release
-Manual Inflation
-With Survival Kit
Life Support International, Inc.
200 Rittenhouse Circle,
Bldg 4 West
Bristol, PA 19007
Tel: +1 215-785-2870
Fax: +1 215-785-2880
www,lifesupportintl.com
HARD-20™ LIFERAFT SYSTEM
Helicopter Air Droppable Rescue Device
"Soldier proof"
The HARD-20™ liferaft system is designed to provide total protection of the onboard liferaft. It
is rigged for air drop capability, enabling the aircrew to also use the raft for rescues of others in
the water. The concept was initially designed for the US Special Forces 160th SOAR(A) on board
MH-47 Chinook helicopter, however the HARD-20™ liferaft system can be easily modified for
other aircraft applications. The hard shell canister features wheels, and a unique bulkhead Mount/
Release system, enabling deployment by one-person with single point release. The system consists
of the following:
• RUGGED polyethylene CANISTER
• STATIC DEPLOYMENT SYSTEM
The canister is constructed of impact resistant polyethylene,
and features ribbed construction, heavy wall aluminum
valance with dust seal, 2 Heavy duty black spring bail
handles, interior rigid foam set with cutout for life raft, and
wheel sets, resulting in an extremely rugged case for
transporting the Life raft.
Canister Dimensions: 34" x 10" x 25"
The system incorporates a 20 ft. Static Line for purpose of
Static Drop from Helicopter. The Static Line “slug” is
uniquely stowed inside the Case, eliminating line foul up.
• MANUAL INFLATION
Located on the one end of the raft is a Manual Inflation
Handle, permitting direct inflation of the Life Raft. A safety
strap enclosure pocket prevents inadvertent inflation.
• LIFE RAFT, LRU-15/A VACUUM PACKED
The system includes a standard 20-Man LRU-15/A Life
raft, vacuum packaged for long term life cycle & reduced
maintenance cycle.
SYSTEM PART NO. FLO-4105-AD
HARD-20™ LIFERAFT SYSTEM
PERFORMANCE SPECIFICATIONS:
• Life raft, LRU-15/A, 20-person capacity
• Overall outside dimension: Length 34" x Width 10" x Height 20”
• Capable of airdrop from helicopter to persons in water from altitude of 30' to 100'
• Capable of deployment by one-person via single point release
• Overall weight 110 lbs
• Easily transported by 1 or 2 persons
• Life raft is protected from exposure to foreign matter, abrasions & punctures
• Life Raft Environmentally Packaged to decrease Maintenance cycles & maintenance costs
• Overall packed volume reduced from existing 20-person life raft configuration
• Life raft can be removed/ installed in Aircraft without the use of special tools, by one person
• Life raft suspension system will withstand a 30-G load force on all axis
• Life raft will store in rear seat location of CH-47 without degrading performance of aircraft
operation or completion of mission requirements
• Installation on Aircraft will not adversely affect Weight & Balance
• Life raft Canister clearly marked for proper ID & operation of the raft for manual deployment
• Life raft Canister finished to maximize or minimize visibility as required
Vacuum Packed 20-Man
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
20-Man, LRU-15/A
LIFE RAFTS, U.S. MIL-SPEC
MULTI-PLACE LIFE RAFTS
4 Person .......... LRU-12/A/ MA-1 .............. MIL-L-5567
7 Person .......... LRU-13/A/ LRU-1/P .......... MIL-L-5567
20-Person Raft, F2B
12 Person ........ LRU-14/A/ MK-12 ............ MIL-L-18484
20 Person ........ LRU-15/ F2B ..................... MIL-L-9131
U.S NAVY/ AIR FORCE LIFE RAFTS
1 Person ......... LR-1 ....................................... MIL-L-81542
1 Person ......... LRU-16/P ............................... MIL-L-83491
1 Person ......... LRU-18/U .............................. MIL-L-85824
1-Person Raft, LR-1
Manufactured By:
4-Person Raft, LRU-12/A
7-Person Raft, LRU-13/A/ LRU-1/P
12-Person Raft, LRU-14/ MK-21
1-Person Raft, LRU-16/P
1-Person Raft, LRU-18/U
LSI’s own In-house FAA Certified Repair Station #LFPR314K provides
full repair on most makes and models of inflatable safety equipment.
Additionally, we have the capability to environmentally package all
life rafts and accessories, extending the service life and minimizing
inspections.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
LIFE RAFTS, T-10 AS
FAA-TSO C70a TYPE II APPROVED
TWIN TUBE
T-10 AS
Compact, Lightweight Offshore Life Rafts for Sailor’s and Racers
T-10 rafts provide superior performance in a smaller, lighter package. Buoyancy tubes are made from two-ply FAA
approved, neoprene rubber coated fabric. These rafts feature inflatable boarding ramps for easy entry, self-erecting
canopies, and insulated double floors for insulation. Composite inflation cylinders help keep the weight low. Packed in soft
fabric valise.
These rafts also include these deluxe features:
· Automatic erecting heavy duty canopy made for 200 Denier nylon.
· Canopy colored bright fluorescent orange outside and soothing blue inside to prevent sunlight from shining through leading
to sea sickness.
· Flashlight (2 x AA lithium battery size) mounted inside to canopy arch for quick access.
· Interior, lithium powered light mounted to canopy arch. Light activates automatically upon inflation and can be turned off
in daytime to conserve battery life.
· Two (2) adjustable position storage bags each with two individual pockets.
· Black seam tape on all tube corners for added strength.
· Instruction markings screen printed to placards mounted on life raft tube.
CAPACITY MODEL
10 PERSON ... T-10 AS ...........
Raft Capacity ................................... 10
Overload Capacity ........................... 15
See reverse side for Life Raft Specifcations
LIFE RAFTS, FAA TSO Approved, Specifications
CAPACITY:
Rated: 10 Persons
Overload: 15 Persons
DECK AREA PER PERSON:
(@ rated capacity)
3.6 ft.2 (0.334 m2)
APPROVAL:
FAA TSO-C70a, Type I
STABILIZING BAGS:
Volume: 5 x 1.6 ft.3 (5 x 0.045 m3)
Water Ballast Weight Provided:
5 x 99.8 lbs. (5 x 45.27 kg)
COLOR:
Tube: Yellow
Canopy: Fluorescent red
Stabilizing bags: Fluorescent red
RAFT TUBE DIAMETER:
11.25" (285.75mm)
CANOPY ARCH TUBE DIAMETER:
6.0" (152 mm)
INFLATED VOLUME:
(@ 1.50 psig)
Tube 1: 18.01 ft.3 (0.510 m3)
Tube 2: 18.01 ft.3 (0.510 m3)
Canopy Arch Tube: 2.11 ft.3 (0.059 m3)
Boarding Ramp Tube: 1.14 ft.3 (0.032 m3)
Total: 39.27 ft.3 (1.11 m3)
TUBE VOLUME PER PERSON:
@ rated capacity)
3.60 ft.3 (0.102 m3)
TOTAL TUBE BUOYANCY:
(excluding raft floor)
2247 lbs. (1019.5 kg)
BUOYANCY PER PERSON:
(@ rated capacity, excluding raft floor)
224 lbs. (101.9 kg)
TOTAL DECK AREA:
36.0 ft.2 (3.34 m2)
TUBE OPERATING PRESSURE:
Minimum: 1.5 psig (0.103 bar)
Nominal: 2.0 psig (0.138 bar)
Maximum: 3.0 psig (0.207 bar)
PRESSURE RELIEF VALVES:
Open: 3.0 psig (0.207 bar)
Close: 2.0 psig (0.138 bar)
TUBE BURST PRESSURE:
Over + 10 psig (+0.69 bar)
INFLATION SYSTEM:
Cylinder Type:
DOT E 11194-4500,
TC-SU 5303 310
Carbon and Glass Fiber Composite
Charge Pressure: 4500 psig
ENVIRONMENTAL LIMITS:
Temperature:
Functional Range: -40 to 140 oF (-40 to 60 oC)
Storage Range: -65 to 160 oF (-54 to 71 oC)
Humidity:
Up to 95% relative humidity.
Altitude:
-2000 to 45,000 ft. above sea level.
SERVICE LIFE:
Indefinite if raft continues to pass periodic maintenance
inspection.
FREQUENCY OF INSPECTION:
Every 3 years, maximum.
LSI’s own In-house FAA Certified Repair Station #LFPR314K provides full repair on most makes and
models of inflatable safety equipment. Additionally, we have the capability to environmentally package
(vacuum packaging) all life rafts and accessories, extending the service life and minimizing inspections.
200 Rittenhouse Circle, Bldg. 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
LIFE RAFTS, T-12
FAA-TSO C70a TYPE II APPROVED
TWIN TUBE
The T12 life raft is a self-inflating life raft intended for use by aircraft crew members and
passengers during overwater emergencies and are designed to provide safe, rapid and
reliable means for aircraft egress in case of such an emergency.
When deployed and in water, the T12 may be boarded on either side. Raft accessories are
contained in an accessories case tied to raft using a 5 (five) foot (1.52 meter) case tie line.
Accessories case is pulled onto raft by occupants subsequent to boarding. The fabric deck
is equipped with an inflatable center float to provide additional flotation support. Center
float is to be inflated by occupants subsequent to boarding using the hand pump supplied
with raft equipment. Raft canopy, located inside accessories case, features two (2) roll-up
doors and a rain water collector in the top of the roof panel.
CAPACITY MODEL
12 PERSON ... T-12 .................
Raft Capacity ................................... 12
Overload Capacity ........................... 18
Total Tube Buoyancy ...................... 3045 lbs
.......................................................... (1381.2kg)
Total Deck Area per Person ........... 3.60 sq. ft.
OPTIONS AVAILABLE:
· Customized Survival Kits & Watermakers
· Custom Packs Available
· Radio Beacons, ELTs
See reverse side for Life Raft Dimensions & Technical Drawing
LIFE RAFTS, FAA TSO Approved, Specifications
MODEL
PACK SIZE
WEIGHT
SURVIVAL KIT
T-12 .......................... 31.5" x 11" x 16.5" ................. 90 lbs ......................... 135 Kit/ Special Valise
...................................................................................................................... Pack w/ Equipment Inside
NOTES:
* Dimensions & weights shown are nominal and do not allow for pack expansion and swelling.
* Tolerances of actual pack dimensions:
For Dimensions of 5.5 inches & less= -0.25/+ 1.0 inches / For Dimensions greater than 5.5 inches= +/- 0.5
inches.
* For Stowages compartment clearance, allow additional 0.5 to 1.5 inches in excess of final pack dimensions.
*Tolerance of actual pack weight = +/- 3.0 lbs.
* Allow additional 2.0 to 4.0 lbs weight when ELT installed
T-12
LSI’s own In-house FAA Certified Repair Station #LFPR314K provides full repair on most makes and
models of inflatable safety equipment. Additionally, we have the capability to environmentally package
(vacuum packaging) all life rafts and accessories, extending the service life and minimizing inspections.
200 Rittenhouse Circle, Bldg. 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
LIFE RAFTS
FAA-TSO C70a TYPE II APPROVED
SINGLE TUBE
Non-Transport Series single tube life rafts are intended for crewmember and passenger use aboard aircraft during
over water emergencies. These rafts are comprised of a circular flotation tube compartmentalized into two chambers by vertical bulkheads and a fabric deck which is attached to the tube structure. Neoprene coated nylon fabric
is used throughout each raft design. A combination life line/grasp line assists in boarding.
These life rafts have a lanyard-activated, manually-operated carbon dioxide (CO2) inflation system. A manuallyoperated hand pump, secured to the boarding station handle affords full inflation, or topping off of the flotation
chambers, if required. Each of the two compartmentalized chambers is maintained to equal pressure by individual
pressure relief valves - one in each chamber.
Miscellaneous accessories are contained about the raft perimeter. Appropriate instructions for the use of these
accessories are printed on the tube and deck. A raft instruction manual is tied to the boarding handle on the deck.
Each raft has a canopy which is stowed with survival kit items that are contained in a red or yellow accessory case
attached by a line to a raft life line loop. The canopy contains a door opening with a roll up door cover and a
rainwater collector in the top or roof panel. Canopy rods and a center mast are provided to support the canopy
when it is erected. The canopy, its center mast and supporting rods are encased in a protective bag. Canopy sides
can be raised or lowered as required. In the Non-Transport Series rafts which have Federal Aviation Regulation
(FAR) Part 135 survival equipment, the raft has a radar reflector which is an integral part of the canopy. Life rafts
with survival equipment under FAR part 121 rules do not require, and thus do not have, a radar reflector unless
ordered as special option.
CAPACITY MODEL
PART NO.
2 PERSON ..... T-2 ...................FLO-4302
4 PERSON ..... T-4 ...................FLO-4303
6 PERSON ..... T-6 ...................FLO-4353
9 PERSON ..... T-9 ...................FLO-4409
SURVIVAL KITS IAW FAA REQUIREMENTS:
A = 121 w/ Radar Reflectve Canopy
B = 135, Standard Pack
C = 121 Kit, Standard Pack
D = 121/JAR OPS 1, Special
OPTIONS AVAILABLE:
· Customized Survival Kits & Watermakers
· Custom Packs Available
· Radio Beacons, ELTs
See reverse side for Life Raft/ Survival Kit part nos.
LIFE RAFTS, FAA TSO Approved, Specifications
T-2
T-4
T-6
T-9
Raft Capacity ................................... 2 ..................... 4..................... 6 ....................
Overload Capacity ........................... 3 ..................... 6..................... 9 ....................
Total Tube Buoyancy ...................... 340 lbs ........... 881 lbs ........... 1368 lbs .......
.......................................................... (145.09 kg) .... (399.62 kg) .... (620.52 kg) ...
Total Deck Area per Person ........... 3.7 sq. ft. ........ 3.7 sq. ft.. ....... 3.60 sq. ft. .....
(at rated capacity)) .................... (0.34 sq m) ..... (0.34 sq m) ..... (0.33 sq m) ....
9
13
1676 lbs.
(760.23 kg)
3.7 sq. ft.
(0.34 sq m)
MODEL
PACK SIZE
T-2 LIFE RAFT, P/N: FLO-4302-__
WEIGHT
SURVIVAL KIT
-101 ........................... 15" x 13" x 5"
-103 ........................... 15" x 13" x 7"
-105 ........................... 15" x 13" x 5"
-107 ........................... 15" x 13" x 5"
23.5 lbs .....................
26 lbs ........................
23.5 lbs .....................
23.5 lbs .....................
A/2 121 w/ Radar Reflect. Canopy
B/2 135, Standard Pack
C/2 121, Standard Pack
D/2 Special 121/JAR OPS 1
........................
........................
........................
........................
T-4 LIFE RAFT, P/N: FLO-4303-__
-101 ........................... 15" x 13" x 7" ......................... 33 lbs ......................... A/4 121 w/ Radar Reflect. Canopy
-102 ........................... 15" x 13" x 8" ......................... 36 lbs ......................... B/4 135 Standard Pack
-105 ........................... 15" x 13" x 7" ......................... 33 lbs ......................... C/4 121 Standard Pack
-107 ........................... 15" x 13" x 7" ......................... 33.5 lbs ..................... D/4 Special 121/JAR OPS 1
T-6 LIFE RAFT, P/N: FLO-4353-__
-101 ........................... 27" x 8.5"x 8.5" ..................... 42 lbs .......................... A/6 121 w/ Radar Reflect. Canopy
-103 ........................... 30" x10" x 9" ......................... 46 lbs .......................... B/6 135 Standard Pack
-105 ........................... 27" x 8.5"x 8.5" ..................... 42 lb............................ C/6 121 Standard Pack
-107 ........................... 27" x 8.5"x 8.5" ..................... 41 lbs .......................... D/6 Special 121/JAR OPS 1
T-9 LIFE RAFT, P/N: FLO-4409-__
-101 ........................... 30" x 10" x 9" ......................... 51.5 lbs ...................... A/9 121 w/ Radar Reflect. Canopy
-103 ........................... 30" x 12" x 9" ......................... 57.5 lbs ...................... B/9 135 Standard Pack
-105 ........................... 30" x 10" x 9" ......................... 51.5 lbs ...................... C/9 121 Standard Pack
-107 ........................... 30" x 10" x 9" ......................... 46.5 lbs ...................... D/9 Special 121/JAR OPS 1
NOTES:
* Dimensions & weights shown are nominal and do not allow for pack expansion and swelling.
* Tolerances of actual pack dimensions:
For Dimensions of 5.5 inches & less= -0.25/+ 1.0 inches / For Dimensions greater than 5.5 inches= +/- 0.5 inches.
* For Stowages compartment clearance, allow additional 0.5 to 1.5 inches in excess of final pack dimensions.
*Tolerance of actual pack weight = +/- 3.0 lbs.
* Allow additional 2.0 to 4.0 lbs weight when ELT installed
LSI’s own In-house FAA Certified Repair Station #LFPR314K provides full repair on most makes and
models of inflatable safety equipment. Additionally, we have the capability to environmentally package
(vacuum packaging) all life rafts and accessories, extending the service life and minimizing inspections.
200 Rittenhouse Circle, Bldg. 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
AIRCREW LIFE PRESERVER
LOW PROFILE, HIGH BUOYANCY
MODEL MK-46 LPHB
MK-46 LPHB shown
integrated with
BA-22 Torso Harness and
MK-46 SV Survival Vest
MK-46 LPHB
52 lb. buoyancy
The MK-46 LPHB is a VERY low profile life preserver system providing the same reliability
of our MK-46 series Life preservers, with the added comfort of the lower profile. The MK46 LPHB system features:
•
•
•
•
Low Profile, greater comfort
Increased mobility of head & neck
High Buoyancy Cell design - features 2 Independent chambers within a single cell.
Manual Inflator - Enables user to egress aircraft & deploy manually
The MK-46 LP Low Profile Life Preserver is an excellent option for the following applications:
Parachutists, Special Operations, SWAT personnel, Helicopter and Multi-Engine aircraft
pilots & aircrew.
LOW PROFILE LIFE PRESERVER, MODEL MK-46 LPHB
PERFORMANCE
The MK-46 LPHB life preservers will right the subject to face up position in less than 5 seconds and provides
freeboard mouth clearance and torso positioning.
SPECIFICATIONS
Part Number .. . ............................................ FLO-4523-00
Total Buoyancy ............................................. 52 lb.
Number of Inflatable Chambers ..................... 2 each (Independant)
Manual Inflation System ................................. Halkey-Roberts® 840AM
CO2 Cylinder ................................................ 2 each, 25 gram, MIL-C-25369
Oral Inflation Tubes ....................................... 2 each
Bladder Color ............................................... High Visibility color
Material, Outer Protective Cover ................... 1000 Denier Cordura Nylon
Case Colors available .................................... OD Green , Black, Navy Blue
Size ............................................................... Universal, one size fits all
OPTIONAL ACCESSORIES
•
•
Reflective Tape (installed onto bladder)
Whistle
NOTE: For any activity using ballistic protection, you must utilize the 52 lb. bladder to provide
adequate buoyancy. LSI recommends the use of Spectra Shield® ballistic protection when operating
over water. Spectra Shield® materials are light enough to float.
52 lb. Buoyancy Bladder
LSI has a policy of continuous improvement and reserves the right to modify products or features at any time.
200 Rittenhouse Circle, Bldg. 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
8 Person Life Raft
(Shown Standard Configuration &
Environmentally Packaged)
One Person Life Raft (LRU-16/P)
(Shown in Standard Configuration &
Environmentally Packaged)
ENVIRONMENTALLY PACKAGED
LIFE SUPPORT EQUIPMENT
Life Support International has developed the technology to environmentally package a wide variety of Life Support
equipment. This unique type of packaging has applications with survival kits, medical kits, life rafts, life preservers, rescue
kits, and parachutes. Materials are packaged in a reduced volume environment free from any form of outside
contamination including moisture and UV damage. If for any reason the internal environment has been tampered with
or compromised, the user is immediately aware of the situation and can replace the damaged unit. Advantages:
• REDUCED BULK
• IMPROVED STORAGE
Environmentally packaged equipment is typically reduced in
bulk by up to 40% of original size.
The environmentally packaged items can be customized to
conform to the contours of the storage compartment.
• REDUCED MAINTENANCE FREQUENCY
• LONG TERM STORAGE
Cost savings are also realized because of reduced maintenance cycles. Typically the maintenance frequency of life
support equipment is semi-annual or more frequent. When
the material is environmentaaly packaged, the recommended
maintenance frequency is lengthened to 5 years or more.
Entire systems or components can be packaged for long
term storage requirements, such as emeregency preparedness items.
• REPLACEMENT COST SAVINGS
Environmentally packaged equipment will last longer as
they are protected from every day wear and tear that life
support equipment is normally subject to.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
BILLY PUGH® HELICOPTER RESCUE NET
BFN-4 & BFN-10
The Billy Pugh helicopter Rescue Net has been proven effective by airborne
Search & Rescue crews around the world with hundreds of lives saved.
DESCRIPTION
These Building Fire Nets (BFN) were designed for
Multiple Occupant helicopter rescue. BFN nets
are twelve feet high when fully open, and collapse
to 14" for storage or transport to evacuation site.
4 PERSON
Model No. ................ BFN-4
Diameter Base ......... 44" (112 cm)
Weight ...................... 50 lbs. (23 kg)
Max. Capacity ......... 2,500 Lbs.
10 PERSON
Model No. ................ BFN-10
Diameter Base ......... 60" (152 cm)
Weight ...................... 70 lbs. (32 kg)
Max. Capacity ......... 2,500 Lbs.
SUSPENSION
BFN nets attach easily to cargo hooks (for short haul
procedure). If the helicopter is not cargo hook
equipped, the nets can be suspended by an optional
Yoke Band through the body of some helicopters.
OPTIONAL EQUIPMENT
• 1,000° F Fibreglass Heat Shield
• Rescue Long Line
• Helicopter Yoke (Belly) Band
• Storage Bag
• Fibreglass Storage Container
See individual Product Description Sheets for specifications.
The BFN net is the most widely used multiple occupant helicopter rescue device in the world.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
BILLY PUGH® HELICOPTER RESCUE NET
STRETCHER RESCUE NET
Stretcher Mode (above), Bi-Fold (right)
SPECIFICATIONS
Part No..................RES-1500-00
Weight...................28 lbs.
Max. Capacity......500 Lbs.
DIMENSIONS
Bi-Folded ... .... .... .....31"L x 24"W x 42"H
Fully Extended ..........76"L x 24"W x 42"H
Tri-Folded Storage ... 29"L x 24"W x 7"H
The design and introduction of this device is in response to the growing need for a versatile, compact, helicopter
rescue device. The Stretcher Rescue Net is compatible with reduced door sizes of current helicopter
configurations. When folded for storage, this net takes minimal space.
The Stretcher Rescue Net greatly increases the capability of helicopter rescue units to safely and effectively extract
and transport survivors. Current stretcher configurations that can be utilized for helicopter operations are only
capable of transporting victims in a reclined or horizontal position. At the same time, standard rescue baskets,
harnesses and nets cannot transport injured in the horizontal position.
The Stretcher Rescue Net is capable of transporting victims in the seated position, as a standard rescue basket
or in a horizontal position as a stretcher rescue net. These victims may already be secured to some type of
standard ground type device, such as backboards, pole litters and Stokes type stretchers.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
BILLY PUGH® HELICOPTER RESCUE NETS
AIR/ LAND/ SEA
The Billy Pugh helicopter rescue net has been proven effective by airborne
Search & Rescue crews around the world with THOUSANDS of lives saved.
Billy Pugh helicopter rescue nets are standard issue on all U.S.Navy helicopters,
widely used by U.S. Police & Fire Depts.,
and utilized by many helicopter rescue
crews around the world.
Air/ Land/ Sea Rescue Net
Billy Pugh nets offer a safe means of pick-up and transport
of personnel and/or survivors by helicopter. Designed for
use in the harshest of environments, these nets can be used
on land or in water (flotation collar is optional).
When the net is trailing or in the water, its opening is
stabilized by the use of a removable sea anchor or
drogue. The nets are designed to place the occupant
safely to the rear of the net, preventing inadvertant fallout.
Various models are available, offering different configurations in sizes, flotation, and folding capabilities.
See reverse side for specifications.
The design and construction of the net allows for compact,
easy storage in most helicopters. BPC nets attach easily to
all model hoists or short haul systems. If the helicopter is not
hoist or cargo hook equipped, the nets can be utilized for
Rescue operations using LSI short haul system (customized
for specific helicopter application)
Optional Equipment
• Long Lines
• Yoke Band, Primary Suspension Sling (YB-PSB)
• Yoke band, Cargo Hook Backup (YB-CHB)
• Conecting Hardware
• Storage Bag
BILLY PUGH® HELICOPTER RESCUE NETS, SPECIFICATIONS
X-873
Capacity .................................................. 2 person
Weight ........................................ 32 lbs. (14.5 Kg)
Open Dimension ................ H 47" x W 50" x L 35"
Stored Dimensions .............. H 9" x W 52" x L 27"
Contains Flotation Collar and Folding hinges.
NSN: 1670-00-101-4321
X-874
X-873/ X-874
X-874-UH
Capacity .................................................. 2 person
Weight ........................................... 37 lbs. (17 Kg)
Open Dimension ................ H 47" x W 50" x L 35"
Stored Dimensions ............... H 8" x W 50" x L 35"
Contains flotation collar - Non-folding.
NSN: 1670-00-433-3426
X-874-UH
Capacity .................................................. 1 person
Weight ........................................... 23 lbs. (10 Kg)
Open Dimension ................ H 37" x W 37" x L 34"
Stored Dimensions ............... H 6" x W 37" x L 34"
Contains Flotation Collar, Non-Folding.
X-841-F
Capacity .................................................. 1 person
Weight ............................................. 20 lbs. (9 Kg)
Open Dimension .............. H 39" x W 25.5" x L 35"
Stored Dimensions ............ H 8" x W 25.5" x L 17"
Contains Flotation Collar and Folding hinges.
X-841-F
UH-X/ UH-XF
UH-X/ UH-XF
Capacity .................................................. 1 person
Weight ............................................. 20 lbs. (9 Kg)
Open Dimension ................ H 37" x W 37" x L 34"
Stored Dimensions ............... H 3" x W 37" x L 17"
No Flotation, -XF model has Folding feature.
X-872-SF
Capacity ............................................... 2-3 person
Weight ........................................... 38 lbs. (17 Kg)
Open Dimension ................ H 54" x W 50" x L 35"
Stored Dimensions ............. H 10" x W 50" x L 35"
Contains Flotation Collar and Folding hinges.
U.S. Navy net, largest model available.
NSN: 1670-01-172-3592
X-872-SF
RES-1500-00
Mfg. by the Billy Pugh Company
RES-1500-00 Stretcher Rescue Net
Capacity .................................................. 1 person
Weight ........................................... 28 lbs. (13 Kg)
Open Dimension ................ H 42" x W 24" x L 76"
Stored Dimensions ............... H 8" x W 24" x L 29"
Dual purpose net, used in either the standard
basket mode, or folded down into a Stretcher.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
RESCUE COLLARS/RETRIEVAL SLINGS
P/N: RES-1000-00
SURVIVOR'S SLING
P/N: RES-1005-00
CINCH RESCUE COLLAR
Also known as the "Horse Collar", this rescue sling has been
in use by the US Navy for many years. Filled with buoyant
Kapok foam and waterproof cover. Two retainer straps, one
with quick ejector snap, and one with V-Ring, are fastened to the
Designed for swift water, cliff extraction, or confined space
rescue, where a rescue swimmer cannot be present. This unique
devise allows survivors to enter the collar from either side. Once
the survivior has properly entered the collar, the rescuer applies
tension, the victim weight releases the connector, allowing the
webbing of the sling.
collar to "cinch" around the victim.
P/N: RES-0215-00
QUICK STROP
The Quick Strop can be placed under the arms, around the back
or over the head of a survivor in one quick motion. To prevent
the survivor from slipping out, a slide buckle slides down
the strop and attaches to an adjustable crotch safety strap.
Instructions and pictorals are printed on the Strop.
P/N: RES-0216-00
RESCUE STROP
Designed to hoist uninjured military personnel during helicopter operations. Designed to be unaffected by repeated use in
the marine environment: constructed of nylon, closed cell foam
and stainless steel hardware.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
SELF-INFLATING RESCUE DEVICES
HELI-SLING™
HOISTING SLING
The light-weight, auto-inflating HeliSling™ allows
immediate delivery of life-saving flotation to victim in the
water, providing the time needed for rescue personnel
to retrieve individual victims, or for secondary response
vessels to respond to the scene.
The auto-inflating HeliSling™ is attached to 50 feet of
5/8" x 5000lb PolySpectra line with a safe working load of
500 lbs to permit the hoisting & retrieval of an individual
victim from the water. The high strength Spectra webbing
with a designated hook point permits safe hoisting using a
conventional helicopter winch and line, or a ship’s derrick.
Available individually or in 6-pack bag for multiple
victim response.
MAN-OVERBOARD™
RESCUE RING
The Man Overboard™ Inflatable Life Ring is an inflatable
buoy that throws like a baseball, and inflates automatically
in less than 5 seconds. There is a reusable break-away
pouch. Strong nylon retrieval harness. SOLAS-grade
reflective tape is standard. Size: 20"
Available individually or in 6-pack bag for multiple
victim response.
Man Overboard™ P/N: RES-2053-00
Man Overboard™ 6-pack P/N: RES-2053-six
HeliSling™ P/N: RES-0665-00
HeliSling™ 6-Pack P/N: RES-0665-six
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
AXELCUT™
Emergency Hoist Cable Cutter
The AxelCut™ is a light-weight, one-handed, emergency hoist cable cutter. The cutting
blades are made from the highest quality Swedish steel. It is unaffected by EMI, lightning,
or any other possible hoist system failures and is designed for low cost and a long life.
There are no explosive charges or shelf life issues and it can cut the cable repeatedly.
Qualified to +160° F, -40° F, Salt Fog, and Endurance.
Airborne hoist rescues rarely happen on calm seas or nice days. If the hoist cable gets caught in a ship’s rigging,
trees, rocks, railings or worse yet around the rescuer’s neck, the cable needs to be cut quickly. Existing two
handed cable cutters are too slow, ineffective, and not designed for this purpose. The hoist installed cable cutter
will cut the cable inside the hoist, thus ending any chance of continuing the life saving mission. However, with
the AxelCut™ and a QuickSplice™ you can finish the mission. It is unquestionably "the right tool for the job."
The AxelCut™, with its fast, clean, one handed cut allows the use of a quick splice plate; permitting the ballistic
hoist-installed cable cutter to be used as the backup for helicopter emergencies. The AxelCut™ can also save
significant down time if the cable must be cut; because if the ballistic hoist-mounted cable cutter is used, the
hoist system will have to be rebuilt, and the cartridge will have to be replaced.
AxelCut™ Emergency Hoist Cable Cutter
Purpose:
The AxelCut is a manually operated one handed cable
cutter, designed to cut helicopter hoist cable .188
inches or 4.7 mm in diameter maximum. It is designed
to cut the hoist cable and release the load in the event
of entanglement in less than two seconds.
Technical:
The AxelCut is designed to meet the environmental
conditions inherent in a rescue or utility helicopter. It is
made from the corrosion resistant materials, stainless
steel and anodized aluminum. The cutting blades are
made of tool steel and coated with electro-less nickel
plating. The Axelcut will produce a minimum of 200
cuts. The cut is extremely clean and allows the use of
the various types of quick splice plates. The AxelCut is
supplied with two PTFE coated stainless steel mounting
brackets, and a quick release pin.
Size:
74 cm (29 in) long and 21 cm (8.2 in) wide at the hook.
51 cm (2 in) in depth. The opening for the cable is 6 mm
minimum.
Operation:
The AxelCut is controllable via the handle. The operator
reaches out and captures the cable while holding on to the
cable or aircraft with the other hand. Once the cable has
been captured by the AxelCut hook, the operator braces
the butt of the AxelCut against their body and draws the
handle towards them in a quick motion. The handle
actuates the cutting blades with a large mechanical
advantage and cleanly cuts the cable.
Operation recommendation:
The cable should be cut far enough below the hoist to
enable a quick splice to be used. In this way the cartridge
actuated cable cutter on the hoist is used as the emergency
backup.
Life:
The AxelCut has no life limitation.
Maintenance:
One or two drops of clean light oil should be applied to the
cutting blade interface once every 6 months. WD-40 can
be applied to the pulleys and handle shaft after a clean
water rinse as required.
Weight:
2.5 lbs
AxelCut Part No: RES-9000-00
NSN: 5110-01-521-1998
"The AxelCut is highly recommended to replace the existing 'bolt-cutters'
presently employed as the back-up emergency hoist cutting system"
Candian Dept. of Defence
The AxelCut can be installed in various ways to best fit your aircraft. It is currently in use in Canada, England,
Kuwait, New Zealand, Spain, Sweden, Taiwan, and the United States.
Aukland NZ Install
Norrlandsflyng Install
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
Bell UH-1 Install
QUICKSPLICE™
Emergency Hoist Cable Splice Plate
Shown with Pelican Swivel Hook (RES-1095-00)
Shown with Rescue Swivel Hook (RES-0410-G)
In the event a Helicopter Hoist cable is sheered due to a frayed cable or it is cut or breaks, the QuickSplice™ quickly
and easily allows the hoist operator to reattach a hook to the cable to continue the rescue or mission.
Quick & easy to install & use. No tools required
Corrosion resistant- anodized aluminum body, stainless steel self-locking shackle. Rated to 2,500 lbs.
No need to cut the bitter end of the cable off before installation. No threading through holes or channels. Just a
simple wrapping process. Steps are engraved on cable splice for easy training.
Compatible with all hoist hooks with swivel eyelets. Shown wrapped with broken cable. Also shown is optional
Pelican Hook and newer style Rescue Hook. *Hooks can be purchased separately or together with the
QuickSplice™.
QuickSplice™ Part No: RES-9001-00
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
HELICOPTER HOIST HOOKS
D-LOK Helicopter Hoist Hook
P/N: RES-0410-G
P/N: RES-0411-G (with Utility Eye)
The D-LOK Hoist Hook has been developed to replace the
double rescue hook, and other current helicopter hoist hooks.
This one incorporates a double lock latch gate design. The latch
gate lock provides the ultimate in security to prevent accidental
opening of the gate. This design allows the gate to be operated
quickly and easily with one hand. It is made of stainless steel for
strength and corrosion resistance. The D-LOK Hoist Hook will
eliminate all of the problems associated with the current double
rescue hook, such as inadvertent engagement, self-release (ring
roll-out), or finger snagging on the small hook. The hook also
exceeds the load test requirement for the double rescue hook.
•
•
•
•
•
Double latch lock
Stainless steel construction
Single hand operation
Multiple attachment fittings available
Latch gate opening: 1.1" (28mm)
Quick Splice
Emergency Hook Replacement Kit
P/N: RES-0194-00
The new wedge style Quick Splice with D-LOK Hoist Hook is
designed for in-flight emergency replacement of the helicopter’s
hoist hook. Should the hoist cable become damaged, broken, or
entangled during rescue missions, the rescue crewman can
quickly cut the cable and replace the hook. This allows the
helicopter to complete the mission in lieu of aborting. A thumb
screw is used to secure the wedge against the cable until a
significant load is applied. The unique wedge design ensures
that as the load on the Quick Splice increases so does its grip on
the hoist cable. The Quick Splice is constructed of anodized
aluminum with stainless steel fasteners for strength and corrosion resistance. Each unit is proof load tested to 2,800 lbs. Once
installed, the wedge design provides for full rated breaking
strength of Hoist Hook.
NOTE: The Quick Splice is designed for 3/16", 19 x 7 hoist
cable only.
Weights: Emer. Hook Replacement Kit @ 4.58 lbs.
Quick Splice @ 0.96 lbs.
Cable Cutter @ 1.66 lbs.
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
Survival Accessory Equipment
Land · Air · Sea
These survival items are intended to provide a means for sustaining life, aiding in escape and evasion, and for suitable
detection capability. Survival items may be packed in survival kits, life rafts, air droppable kits, or individually carried.
RADIOS, BEACONS & TRANSCEIVERS
Beacon, Personal Locator, .................................... SIG-7023-00
Cospas-Sarsat ProFIND SLB 2000
Beacon, Personal Locator, .................................... SIG-7038-00
Cospas-Sarsat ProFIND SLB 1000
Radio Beacon, AN/PRT-5 ..................................... SIG-7025-00
Portable Rescue Beacon, EBC-102A™ ................. SIG-7026-00
Beacon, Automatic ELT, EBC-502™ ..................... SIG-7028-00
Beacon, Helicopter ELT, EBC-302H™ .................. SIG-7029-00
Personal Locator Beacon, Techtest 500-12Y ........ SIG-7042-00
Personal Locator Beacon, Techtest 500-27 ........... SIG-7043-00
Personal Locator Beacon, AeroFix 406™ .............. SIG-7044-00
Personal Locator Beacon, ResQFix 406™ ............. SIG-7048-00
PYROTECHNIC SIGNALING DEVICES
Signal Kit, Military MiniFlare, MK-3 ..................... SIG-1000-UK
Signal Kit, PainsWessex Miniflare 3™ ................. SIG-2003-00
Signal Smoke (Day/Night), MK-124 MOD O ........ SIG-3100-00
Signal, Rocket Flare, Para Red MK-3 ....................SIG-5000-00
Signal, Handheld, MK-7 ........................................ SIG-5030-00
Lifesmoke, Daylight, Buoyant ............................... SIG-5412-00
Signal Smoke, Buoysmoke .................................... SIG-5413-00
Signal Smoke, Parachute ....................................... SIG-5124-00
Smoke, KC-25 Marine Location Marker ................ SIG-5213-00
Signal Smoke, Day/Night ......................................SIG-913-1500
continued on back page
LSI provides all related accessories to support the survival equipment featured, ie; batteries, antennas, cases, etc.
SURVIVAL ACCESSORY EQUIPMENT
PERSONAL STROBES & UTILITY LIGHTS
Flashlight/Strobe, ACR Firefly Plus™ ................. SIG-6013-00
Light Strobe, ACR MS-2000(M)™ ....................... SIG-6014-00
Light Strobe, ACR Firefly 3™ .............................. SIG-6019-00
Light Marker, D-31 ............................................... SIG-6040-OG
Light Signal, ACR C-Light™ ............................... SIG-6060-00
Strobe, ACR C-Strobe™ ...................................... SIG-6061-00
WATER ACTIVATED LIGHTS
Personal Rescue Light, L8-4, TSO-C85, FAA ....... SIG-6022-18
Personal Rescue Light, L8-3, USCG ..................... SIG-6023-00
Personal Rescue Light, Hemilight, Automatic ...... SIG-6025-00
Rescue Strobe Light, Waterbug ........................... SIG-6015-00
Strobe Illumination Marker, SM-2 ........................ SIG-6028-00
FLASHLIGHTS
Flashlight, Traffic Wand ...................................... SIG-7115-00
Flashlight, Angular, MX-991/U ............................ SIG-7100-00
Flashlight, MX-993/U ........................................... SIG-7101-00
Spotlight, Diving, Aqua Kinglite™ ...................... SIG-7208-00
Penlight, Pilot's .................................................... SIG-7122-00
Flashlight, Mag-light™ ........................................ SIG-7125-00
Flashlight, Rescue Laser Light ............................. SIG-2011-00
Flashlight, Pelican M6 3W 2390 LED ................... SIG-7214-00
MISCELLANEOUS SIGNALING DEVICES
Rescue Streamer ................................................... SIG-1125-00
Whistle, Ball, MIL-W-1053 .................................. SIG-8500-00
Whistle, Flat, USCG/SOLAS, Jetscream ............... SIG-8520-00
Mirror, Glass Signal, 2"x 3" .................................. SIG-8050-00
Mirror, Glass Signal, 3"x 5" .................................. SIG-8060-00
Lightstick, Cyalume .............................................. SIG-8650-00
Sea Dye Marker .................................................... SIG-8000-00
KNIFES, AXES & SAWS
Knife, Hook Blade w/ Case .................................. KFE-1005-00
Cutter, Parachute Shroud ..................................... KFE-1500-00
Knife, Hook Blade & Snap, MC-1 ........................ KFE-2000-00
Knife, Pilot Survival w/ Sheath, MIL-K-8662 ....... KFE-3000-00
Knife, Pocket, General Purpose, MIL-K-818 ......... KFE-4000-00
Knife, Rescue Swimmer ........................................ KFE-4500-00
Knife, USCG, Jacknife .......................................... KFE-4601-00
Sharpening Stone ................................................. KFE-5050-00
Machete, Survival w/ Sheath ............................... KFE-6000-00
Knife, First Response Rescue .............................. KFE-6025-00
Knife, Pocket, Jack the Ripper .............................. KFE-7000-00
Knife, Gerber Multi-Plier 800 ................................ KFE-7551-00
Saw, Pocket Hand, 16' .......................................... SAW-1600-00
Crash Axe, Aircraft, 42D8331 ............................... RES-9025-00
COMPASSES
Compass, GI Style Lensatic, MIL-C-10436 ............ COP-1000-00
Compass, Survival, 3/4"w/cord ............................. COP-2100-00
Compass, M-2, MIL-C-58052 ................................COP-4000-00
Compass, Survival Pocket .....................................COP-5000-00
WATER ACCESSORIES
Water, Bagged, 4.227 oz., 125 ml ........................... WTR-1100-00
Desalter Kit, MIL-D-5531E, Type I ........................ WTR-3000-00
Sea Water Purification, Sea Pack ..........................WTR-3500-00
Bag, Water Storage, 5 qt. ......................................WTR-4000-00
Bag, Water Storage, 3 pint .................................... WTR-4100-00
Bottle, Water Storage, 4 oz. ................................... WTR-5000-00
Graduated Drink Cup ............................................WTR-5100-00
Water Purification Tablets .................................... WTR-6000-00
Water Purification Straw ....................................... WTR-6015-00
Liferaft Bailer, USCG ............................................. WTR-7029-00
Liferaft Bailer ......................................................... WTR-7030-00
FOOD RATIONS
Food Packet, General Purpose, MIL-F-43231 ........RTN-1000-00
Food Packet, Aircraft Survival, MIL-F-15381 ........RTN-2000-00
Food Packet, Survival, ST, MIL-F-2409 ................. RTN-3000-00
Food Ration Bars, USCG/SOLAS, 1,200 kcal ........RTN-5050-00
SURVIVAL KITS
Survival Kit, Individual Airmans, SRU-31/P .......... SUR-1000-00
Survival Kit, Parachute, SRU-16/P ........................ SUR-2000-00
USFS Helicopter Survival Kit ................................ RES-9001-00
SURVIVAL ACCESSORIES
Survival Manual, Air Force, AF645 ....................... MAN-1000-00
Matches, Waterproof w/ Container ...................... MTC-1000-00
Matchbook, Waterproof, EE-M-101 ...................... MTC-2000-00
Matchbox, Strike-anywhere, Ohio Blue Tip .......... MTC-2500-00
Fire Starter, Magnesium ........................................ FIS-2000-00
Fire Starter, Wet Tinder ......................................... SUR-3201-00
Fuel Bar, MIL-F-10805D ........................................ FUE-1000-00
Stove, Gas Portable ............................................... STV-1000-00
Candle, Long burning ...........................................SIG-7150-00
Sunscreen, SPF-15 ................................................ SUN-1000-00
Lipstic, Anti-Chap .................................................SUN-1010-00
Blanket, All-Weather, MIL-B-36964 ...................... BLK-1000-00
Thermal Protective Aid, USCG/SOLAS ................. BLK-3300-00
Blanket, Emergency Survival ................................BLK-5000-00
Fishing Kit, MIL-F-6218 ........................................ KIT-2000-00
Snake Bite Kit ........................................................KIT-3000-00
Cord, MIL-C-5040, Type I, 30 ft. ............................ TC01-NT-30
This is a partial list of the thousands of items we carry in support of your survival requirements,
for specific information regarding these and other items, see individual Product Description sheets, or contact:
200 Rittenhouse Circle, Building 4 West, Bristol, PA 19007
TEL (215) 785-2870, FAX (215) 785-2880
www.lifesupportintl.com
ACR MS-2000 (M)™
Distress Marker Light
DISTRESS LIGHT
Distributed by: Life Support International
www.lifesupportintl.com
www.ACRARTEX.com
ACR MS-2000 (M)™
Distress Marker Light
When it comes to saving lives, anything
less than the best is not an option. Since
the introduction of the MS-2000(M)™, it
has become the main Combat Search
and Rescue (C-SAR) light carried by elite
military forces around the world.
Like our highly regarded, reliable
SDU-5E, the MS-2000(M)™ meets all
military specifications, including MIL-L38217D and CID A-A-59176, and it has
many improved life saving features to
meet multiple mission capability.
ACR features five distinctive versions of
the MS-2000(M)™ that meet the most
up-to-date requirements of the military
and fit virtually any application.
• Shield extends/retracts for omni- or
unidirectional visibility
• IR filter blocks all visible light (lets
through only IR light) for NVG viewing
• Improved felt liner prevents leakage
• New braided steel retainer keeps
• Shielded filter alerts friendly forces,
distinguishes strobe from ground fire
when in place
• For extreme cold environments or long
term storage, use 2 common AA
lithium batteries
• Operates on 2 standard alkaline AA
batteries
SPECIFICATIONS
Product Number
3990: MS-2000(M)™,
3991: MS-2000(M)™ Waterbug (water
activated version),
3994: Doublefly™ (strobe and
incandescent version),
3989.1: MS-2000™ (tested to water
pressure depth of 50 ft., 15.2 m )
Model Number
MS-2000(M)
Size
4.5 X 2.2 X 1.1” (11.4 X 5.6 X 2.8 cm)
Weight
3.67 (104 g) without batteries
Batteries Required Two AA alkaline or lithium batteries
(not included)
Operational Life
Strobe: 8 hours minimum,
Incandescent: 2 hours minimum
(Doublefly™ only)
Light Output
250,000 peak lumens per flash
Flash Rate
50 ± 10 per minute
Light Dispersion
White: Omnidirectional, Infrared:
Omnidirectional, Blue: Unidirectional
Visibility
Military tested at a distance of six (6)
miles (9.6 km) on a clear, dark night
Waterproof
33 ft (10 m)
Construction
Case, lens and flash guard: High impact
polycarbonate, IR filter: Butyrate
Case Color
Black with olive drab flash guard
Activation
Large sliding spark proof magnetic reed
switch
Limited Warranty One year
Federal Stock Number (FSN)
Product number 3990 only:
6230-01-411-8535
•Attached infrared (IR) filter for Night
Vision Goggle (NVG) viewing
•New felt liner on inside of light guard
sleeve prevents overt light leakage
during IR mode
•Directional, shielded blue filter alerts
friendly forces; identifies strobe from
ground fire
•Improved electronics and silicone
conformal coating protect against
moisture
•Waterproof- factory tested to 33 ft
(10 m.); 15.2 m (50 ft) version
available
•Omnidirectional white strobe emits
brilliant 250,000 peak lumens
•Raised polarity indicators allow correct
battery placement even when visibility
is low
For more information, Contact:
200 Rittenhouse Circle, Bldg. 4W, Bristol, PA 19007 - USA
T: +1 (215) 785-2870 | F: +1 (215) 785-2880
[email protected], www.lifesupportintl.com
ACR SLB-2000-100 (AN/URT-45)
Personal Locator Beacon
PLB
Distributed by: Life Support International
www.lifesupportintl.com
www.ACRARTEX.com
Distributed by: Life Support International
ACR SLB-2000-100 (AN/URT-45)
406 MHz GPS Personal Locator Beacon
Compact, military-grade emergency
beacon providing tri-band operation
with GPS and two-way voice.
Accurate: better than 100 meters within
one minute of activation
Easy to install: designed for use in ACES
II/III and Martin-Baker ejection seat
packs, and BA-22 parachutes
Rugged: withstands demanding
conditions
Reliable: built-in self-test
Optional remote programming/toggle
switch cable assembly (USB 2.0
compatible)
Easy to use: manual and automatic
activation
SPECIFICATIONS
NSN
5825-20-003-2520
Size
4.9 x 2.6 x 1.3” (124 x 67 x 33 mm)
Weight
1.3lbs /590g (including batteries)
Color
Olive drab (FED-STD-595)
Material
Aluminum enclosure;
dull/low IR reflective surface
Frequency
406.037 MHz
Homing: 121.5 and 243.0 MHz
Power
5W ±2dB, Homing: 100 mW minimum
on both frequencies
Modulation
Phase modulation ±1.1 Radians
Homing: Amplitude modulation, swept
down between 1300 Hz and 500 Hz,
2.5 Hz sweep rate
Stability
Full compliance with Cospas-Sarsat
specification
Training
4.9”
121.5 and 243.0 MHz have offset
capability to any designated training
frequencies
GPS Receiver
20 Channels
Sensitivity
-144 dBm cold start; -159 dBm tracking
Antenna
Built-in and remote
Accuracy
< 100 m
Time to First Fix
< 1 minute on average
Operating
Temperature
-40°F to +131°F (-40°C to +55°C) verified
at factory
-4°F to +131°F (-20°C to +55°C) CospasSarsat certified
Storage
Temperature
-67°F to +185°F (-55°C to +85°C)
Activation
Auto activation or one-hand (left or right)
gloved operation
Endurance
-4°F to +131°F (-20° to +55°C)
26 hrs in Mode 1 (406, 243, 121.5 MHz, GPS)
48 hrs in Mode 2 (243, 121.5 MHz)
52 hrs in Mode 3 (406 MHz, GPS)
Cospas-Sarsat certified
Antenna
104 cm (41”) flexible wire RF
antenna; secondary built-in blade
antenna 28.5 cm (11.25”)
114 cm (45”) flexible wire GPS
antenna; secondary built-in GPS
antenna
Ant. Connector
50 Ohm connector
Controls
Function Switch: Test - Off - On;
Mode Switch: 1 - 2 - 3
Indicators
Transmit, GPS Fix, Test Pass,
Test Fail
Altitude
Up to 50,000 ft (15,000 m)
Rapid Decompression
Will survive at up to 60,000 ft
(18,000 m)
2.6”
Waterproof
33 ft (10 m)
Humidity
95%
Built-In Test (BIT) Functional test with pass/fail
indicators
1.3”
11.25”
Batteries
2 x Lithium bromine chloride
complex
Replacement
User replaceable at 5 years, upon
operational use, or after 32
self-tests (BIT)
Design Specifications
Cospas-Sarsat T.001 / T.007
RTCA/DO-204, MIL-STD-461,
MIL-STD-810F, NATO STANAG 7007,
TSO-C142a
For more Information:
200 Rittenhouse Circle, Bldg 4W, Bristol, PA 19007 USA
T: +1 (215) 785-2870 | F: +1 (215) 785-2880
[email protected], www.lifesupportintl.com
www.ACRARTEX.com
For More Information, Contact:
200 Rittenhouse Circle, Bldg. 4 West, Bristol, PA 19007 - USA
T: +1 (215) 785-2870 | F: +1 (215) 785-2880
[email protected], www.lifesupportintl.com