Impulse E/VHT - Chief Automotive Technologies

Impulse E/VHT
PARTS MANUAL
A
DOVER
COMPANY
2005 Chief Automotive Technologies
Limited One-Year
Warranty & Liability
CHIEF'S LIMITED ONE-YEAR
WARRANTY & LIABILITY
Chief Automotive Technologies warrants for one year from date of installation and/or
purchase any components of its impulse E/VHT Repair System which do not perform
satisfactorily due to defect caused by faulty material or workmanship. Chief’s obligation under this warranty is limited to the repair or replacement of products which are
defective and which have not been misused, carelessly handled, or defaced by repair or
repairs made or attempted by others.
CHIEF AUTOMOTIVE TECHNOLOGIES DOES NOT ASSUME RESPONSIBILITY FOR ANY DEATH, INJURY OR PROPERTY DAMAGE RESULTING
FROM THE OPERATOR’S NEGLIGENCE OR MISUSE OF THIS PRODUCT
OR ITS ATTACHMENTS. CHIEF MAKES NO WRITTEN, EXPRESS OR
IMPLIED WARRANTY WHATSOEVER OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE REGARDING THE
EQUIPMENT OR ANY PART OF THE PRODUCT OTHER THAN THE LIMITED ONE-YEAR WARRANTY STATED ABOVE.
Returned merchandise requires a “RETURNED GOODS AUTHORIZATION NUMBER” on the package. Authorization numbers can be obtained by calling or writing the
Customer Service Department, Chief Automotive Technoplogies. No returned merchandise will be accepted without an authorization number. All returned merchandise
must be shipped freight prepaid (and may be subject to a handling and restocking
charge) to:
Chief Automotive Technologies
Attn: Returned Goods Dept.
1924 E. Fourth St.
P.O. Box 1368
Grand Island, NE 68802-1368
or
Your Authorized
Chief Automotive Technologies
Representative
impulse E/VHT
Parts Manual
PARTS INFORMATION
Bolts/Fasteners
To order replacement parts for the Chief E/VHT
system, contact an authorized representative of
Chief Automotive Technologies, 308-384-9747
(or toll free 800-445-9262 - USA only)
The parts listed in the E/VHT Parts Manual (Part
No. 450429) represent what Chief Automotive
Technologies considers to be user installed.
Other repairs should be deferred to an
authorized representative.
All bolts and fasteners must be replaced with
Chief Automotive Technologies authorized
replacement parts and must not be less than
Grade 5 (Class 8.8).
When contacting Chief Automotive
Technologies by telephone or mail, provide the
following information: name, name of business,
business telephone number, and business
address. Additional information needed when
ordering: description of part(s) and part
number(s). Also indicate the model for which
the part is intended.
Any bolt used in a pulling clamp that is
frequently tightened must be Grade 8 (Class
10.9).
All bolts lengths and diameters must be equal to
those installed at the factory.
Chain
The 1/2 inch tower chains furnished with this
product are a special alloy frame straightening
chain designed exclusively for Chief Automotive
Technologies to meed the rigid requirements of
the collision repair industry. If replacement is
required, purchase only the original Chief
product from an authorized Chief Automotive
Technologies representative.
NOTE: Chief reserves the right to alter product
specifications and/or package components
without notice.
! CAUTION: Always use Chief Automotive
Technologies authorized replacement parts with
the E/VHT system. When replacing any part
!
make certain the part meets the original
equipment requirements.
Electrical Components
All electrical cords and components must be
replaced with Chief Automotive Technologies
authorized replacement parts
The auxiliary 3/8 inch chains available for this
product are a special alloy frame straightening
chain designed exclusively for Chief Automotive
Technologies, Inc. to meed the rigid
requirements of the collision repair industry. If
replacement is required, purchase only the Chief
product from an authorized Chief Automotive
Technologies representative.
CAUTION: DO NOT use 3/8 inch chain on any
towers
Hydraulic Hoses
Labels
The two wire hoses furnished with this product
meet the requirements of SAE 100R2 or SAE
100R16, and have a working pressure of 5,000
psi. They should not be used with any other
system having a higher than 5,000 psi output.
Replacement SAFETY and WARNING labels
are available in several languages, and may be
ordered by contacting an authorized Chief
Automotive Technologies representative.
All hydraulic components must be replaced with
Chief Automotive Technologies authorized
replacement parts.
1
impulse E/VHT
Parts Manual
ASSEMBLY VIEW (20 SERIES SHOWN)
1
4
7
17
3
18
8
10
8
16
14
15
17
2
13
6
5
2
impulse E/VHT
Parts Manual
Parts List
ITEM
1
2
3
4
5
6
7
8
10
11
P/N
450430
450431
450432
450436
450437
450438
450530
450003
450441
450479
DESCRIPTION
Assembly, E/VHT-20 Wide Track Series 20
Assembly, E/VHT-20 Wide Track Series 30
Assembly, E/VHT-20 Wide Track Series 40
Assembly, E/VHT-18 Basic Series 20
Assembly, E/VHT-18 Basic Series 30
Assembly, E/VHT-18 Basic Series 40
Assembly, Wide Track Removable Crossmember (optional)
Assembly, Basic Removable Crossmember (optional)
Assembly, E/VHT 4" Auxiliary Cylinder (optional)
Assembly, 4" Auxiliary Cylinder (optional)
Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
P/N
305084
305093
450044
450350
450450
450469
450470
450490
450501
450580
450801
450895
692090
692107
692135
692143
692154
693339
DESCRIPTION
Tape, Black Striping 1" Wide
Label, Caution - Excelerator Wheel Stops
Decal, Mainframe Impulse VHT
Ramp Complete, Long, (Single)
Assembly, eVHT Cabinet
Bracket, E/VHT Cabinet Hose Holder
Assembly, 360-10 Ton Tower
Weldment, E/VHT-20 Porta-Frame
Weldment, Wide Impulse-20 VHT Mainframe
Weldment, E/VHT Lift Leg
Weldment, Impulse-18 VHT Mainframe
Weldment, eVHT-18 Porta-Frame
Label, Caution Operation
Label, Serial Number
Label, Patent Pending
Label, Caution -Lift of Persons Prohibited
Label, Caution Protect Foot
Label, Caution -Egress/Ingress
3
impulse E/VHT
Parts Manual
EXPLODED VIEW - MAINFRAME
36
14
36
19
1
37
37
36
37
15
1
36
9
4
1
18
2
15
37
1
37
14
1
23
36
36
17
25
37
7
29
33
21
20
36
37
33
36
1
34
13
31
19
5
16
1
9
35
20
10
36
37
12
19
37
31
25
27
22
31
11
17
4
5
16
13
8
1
37
36
29
26
4
6
28
3
32
24
32
impulse E/VHT
Parts Manual
PARTS LIST - MAINFRAME
Parts List
ITEM
1
2
3
1
5
6
4
8
9
5
11
12
13
14
9
10
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
P/N
305030
305049
305723
305724
450057A
450195
450440
450444
450445
450446
450459
450491
450493
450495
450501
450580
450586
450587
450588
450842
450844
450865
450867
450890
450940
450951
450955
450956
450957
450979
450982
539013
539016
620242
683673
692085
692588
693468
707487
DESCRIPTION
Washer, Thrust - 1 1/4 ID x 2 1/2 OD x 1/16 Self Lubricating
SCREW, 10-32 X 1/2 SHCS
Coupler, Female Flat Face
Fitting, Hyd #6MB - #6MJ w/ Orifice
Decal, E/VHT Porta-Frame Bulkhead
Screw, 3/8-16NC x 1.00" Socket Head Cap
Assembly, E/VHT Porta-Frame Manifold
Switch, E/VHT Tilt
Adapter, E/VHT Tilt Switch
Ram, Lift 4 1/2" bore x 10 5/8" stroke
Screw, 1/4-20 x 3/4" Flange Head
Panel, E/VHT Port-Frame
Assembly, Twin Series Weld Clamp
Weldment, E/VHT Lock Arm
Weldment, Wide Impulse-20 VHT Mainframe
Weldment, E/VHT Lift Leg
Pin, E/VHT Lift Leg
Retainer, E/VHT Lift Cylinder Bottom
Pin, E/VHT Lift Cylinder Bottom
Pin, Impulse VHT Tilt
Pin, Impulse VHT Long
Weldment, Impulse VHT Unlock
Bolt, 3/8" x 1 3/4" Shoulder - 5/16-18 Thread
Weldment, E/VHT Overload Sensor
Weldment, Impulse-20 VHT Unload
Bulkhead Fitting, 5/32 PTL
Cover, With Strain Relief For Snap Action Switch
Switch, E/VHT Overload
NUT, #8-32, NYLON LOCK
1/2 Conduit Lock, Tooth Nut
SCREW, #8-32 x 1" BUTTONHEAD-HEX
Bolt, M20 x 2.5 x 90 Hex Full Thread
Nut, M20 x 2.5 Hex
Pig-Tail, Female Mini-Line Cord
Tape, Red, Classic 1"
Label, VHT lock arm position
Bolt, 3/8-16 UNC x 3/4 Grade 5 Plated
Snap Ring, HD for 1 1/4" shaft
Washer, Flat - 1 1/4" ID x 1 7/8" OD x 14 GA - plated
* - Note: If replacing a 450494 weldment, Order 450492 spacers (qty 2) and 620731 bolts (qty 2)
5
impulse - E/VHT
PARTS MANUAL
EXPLODED VIEW - TOWER (RIGID COUPLER MODEL)
31
38
40
12
34
39
49
43
9
50
41
47
18
42
36
37
28
2
17
19
13
2
16
25
48
7
1
44
7
22
45
23
17
8
5
26
35
6
32
14
15
3
1
16
10
6
33
4
51
11
impulse E/VHT
Parts Manual
PARTS LIST - TOWER (RIGID COUPLER MODEL)
ITEM
1
P/N
305030
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
305063
305720
305723
305726
450014
450146
450195
450218
450227
450228
450234
450235
450236
450238
450241
450243
450244
450245
450259
450471
22
23
24
25
26
27
28
29
450475
450592
450593
450594
601046
601048
601130
601237
Parts List
DESCRIPTION
Washer, Thrust - 1 1/4 ID x 2 1/2 OD x 1/16 Self
Lubricating
Washer, 3/4"id x 1 1/8 OD x .093" Thick Shim
Fitting, Hyd #6MBX - #6MJ
Coupler, Female Flat Face
Fitting, Hyd #6MB - #6MB
HOOK, 360 TOWER
Roller, Inside Tower
Screw, 3/8-16NC x 1.00" Socket Head Cap
Bar, Tower Linkage Driver
Bolt, 3/8" x 2" Shoulder - 5/16-18 Thread
Guard, Tower Outside Roller
Spacer, Tower Force Clamp
Assembly, Tower Outside Wheel
Screw, 3/8-16NC x 2 3/4 Socket Head Cap
Shim, 360 Tower - 16 ga.
Washer, 2" OD x 13/32" ID x .047" Thick
Screw, 3/8-16 Socket Head Cap
Key, 1/4 x 1/4 x 1"
DECAL, IMPULSE TOWER
Dowel Pin, .5001 - .5003 Dia. x 1.5"
Cylinder, 74.8mm bore x 257mm stroke spring
return
Weldment, Short 360-10 Ton Tower
Block, Tower Manifold
Hose, -6FJX to 6FJX90M x 53" x 3/8" ID
Hose, -6FJX to 6MPX x 10" x 1/4" ID
Straight Adapter, 6400-6-6
Straight Adapter, 6400-6-4
Portable Gauge Assembly, Front S21
Flange, 4 3/4" Diameter
ITEM
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
Note: Refer to pages 8 & 9 for cylinder repair kit information.
7
P/N
602619
610001
620226
629773
630635
630643
687101
687102
687103
687104
687105
687106
687107
687125
687137
687143
692057
692091
692093
692096
693337
770016
770147
607161
601201
680747
707487
602829
693468
Parts List
DESCRIPTION
Ram Bolt
Tower Head, 1/2" Chain 10-Ton
Screw, 3/8-16 x 1 1/4 Socket Head Cap
Bolt, 3/4-10 NC x 2 3/4" Long
Bolt, 1/4-20 x 1 Hex
Bolt, 1/4-20NC x 1 1/2 Hex Plated Gr. 2
Spacer, 360-10 Ton Tower Outrigger
Pin, 360-10 Ton Tower Linkage Long
Pin, 360-10 Ton Tower Linkage Medium
Pin, 360-10 Ton Tower Linkage Short
Bar, 360-10 Ton Tower Float Linkage
Shim, 360-10 Ton Tower Outrigger .0598"
Shim, 360-10 Ton Tower Outrigger .0164"
Weldment, 360-10 Ton Sure Lock
Weldment, 360-10 Ton Sure Lock Release
Weldment, Wide Sure Lock Shaft
DECAL, CAUTION ON ANGLE PULLS
Label, Warning, Force Clamp, Impulse
Label, Caution, Pinch-Point, Impulse
LABEL, CAUTION CROSSMEMBER POSITION
Label, Warning, Do Not Position Yourself
NUT, 3/4-10NC LOCK JAM GR5 PL
Washer, 1" Internal Tooth Lock
Machined Collar, S21
Roller, 5" x 1/2" Chain - S21/POSI TRAK Collar
Pin, Grooved for Cast Collar
Washer, Flat - 1.25"IDx1.875"ODx14GA-plated
Assembly, Tower Collar Locking Knob
Snap Ring, HD for 1 1/4" shaft
impulse E/VHT
Parts Manual
EXPLODED VIEW - TOWER CYLINDER ASSEMBLY (FLEXIBLE COUPLER MODEL - VERSION ONE)
1.75 [1 3/4]
10
9
8
7
NOTE - Identify assembly by
width across flats of bolt.
11
1
3
TO PRESSURE
GAUGE
5
2
6
4
Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
11
P/N
305048
305745
450473
450499
601001
601027
601047
687108
687109
687146
687147
H2510-99
DESCRIPTION
BOLT, HEX, 1/2-13 x 3/4" Gr5, ZP
Coupler, Female 2FFI-14NPTF-#6FMP
Hose, -6FJX to 1/4 NPT male x 55" long x 3/8" ID
Branch T, 1/4 MP - 1/4 FP - 1/4 FP
Hose, 16" 6MPX-6FJX
Adapter, -4MP - 6MJ
Elbow Adapter, 3/8 NPT to -6 JIC
Cylinder, 360-10 Ton Tower Spring Return Single Acting
Flange, 4 3/4" Diameter
Bolt, 360-10 Ton Tower Cylinder
Block, 360-10 Ton Cylinder Mount
Repair Kit, E/VHT Tower Cylinder Version One (Not Shown)
8
impulse E/VHT
Parts Manual
EXPLODED VIEW - TOWER CYLINDER ASSEMBLY (FLEXIBLE COUPLER MODEL - VERSION TWO)
9
8
10
1.5 [1 1/2]
2
NOTE - Identify assembly by
width across flats of bolt
7
3
TO PRESSURE
GAUGE
5
1
6
4
Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
P/N
305745
450471
450473
450499
601001
601027
601048
601237
602619
770147
450074
DESCRIPTION
Coupler, Female 2FFI-14NPTF-#6FMP
Cylinder, 74.8mm bore x 257mm stroke spring return
Hose, -6FJX to 1/4 NPT male x 55" long x 3/8" ID
Branch T, 1/4 MP - 1/4 FP - 1/4 FP
Hose, 16" 6MPX-6FJX
Adapter, -4MP - 6MJ
Straight Adapter, 6400-6-4
Flange, 4 3/4" Diameter
Ram Bolt
Washer, 1" Internal Tooth Lock
Repair Kit, E/VHT Tower Cylinder Version Two (not shown)
9
impulse E/VHT
Parts Manual
EXPLODED VIEW - CABINET
17
11
14
12
27
26
10
2
28
4
15
43
20
31
8
38
31
40
36
48
30
5
29
16
23
45
47
44
13
18
52
19
10
impulse E/VHT
Parts Manual
PARTS LIST - CABINET
Parts List
ITEM
40, 41
35, 37, 34, 36
6, 5
22, 21
5, 6, 8, 3
4, 2
1
2
10
11
12
13
14
15
16
17
18
19
20
23
26
27
28
29
30
31
32
33
38
39
42
43
44
45
46
47
48
49
50
51
52
53
P/N
450989
450977
450497
450474
305848
305801
305722
305797
450057-B
450057-C
450057-D
450451
450453
450454
450455
450459
450460
450466
450467
450483
450883
450889
450937
450950
450951
450952
450957
450963
450979
450982
601026
620242
692053
692055
692085
692096
692271
694060
706409
707410
788190
798498
DESCRIPTION
POWER CORD, 12/3 SJO RAW E-VHT
Wire Harness, PCB to Coils
Hose, E/VHT Cabinet to Lift
Hose, -6FJX to -6FJX 30" Long x 3/8" ID
Tubing, 5/32" Soft Nylon Black
Tubing, 5/32" Soft Nylon Natural
Connector, Male Flat Face
Fitting, 10-32 Microlok, 90 dg
Decal, B of 450057
Decal, C of 450057
Decal, D of 450057
Assembly, Power Unit, E/VHT
Nut, 1/4-20 NC J Style Clip
Switch, E/VHT Lift/Tower Rocker
Assembly, E/VHT Hydraulic Manifold
Screw, 1/4-20 x 3/4" Button Head Torqe Plus
Weldment, E/VHT Cabinet
Panel, E/VHT Pump Cabinet Front
Panel, E/VHT Cabinet Rear
Adapter, -8 ORB to -6 JIC Swivel 90
Normally Closed 3-way Spool Valve
BUTTON ACTUATOR / 1/8" STEM
Fitting, Pneumatic, 10-32 to 5/32 Press-to-Lock T
Fitting, 5/32 PTL to 1/4 NPT Female Bulkhead
Bulkhead Fitting, 5/32 PTL
Assembly, E/VHT Control Board
Nut, #8-32 Nylock
Connector, 3 Pos header 5.08 Pitch
1/2 Conduit Lock, Tooth Nut
Screw, 8-32 x 1 Button Head Hex
Plug, 1/4 NPT
Pig-Tail, Female Mini-Line Cord
LABEL CAUTION LOCK LEVEL IMP-VHT
LABEL, CAUTION, LIFT SWITCH ON/OFF
Label, VHT lock arm position
LABEL, CAUTION CROSSMEMBER POSITION
STRAIN RELIEF CONNECTOR, 3/4"
PLUG, INDUSTRIAL GROUNDING
Bolt, 1/4-20NC x 3/4" Gr2 Plated
Washer, 1/4" Flat
DECAL, CHIEF AUTOMOTIVE LOGO
STRAIN RELIEF CONNECTOR, 1/2"
11
impulse E/VHT
Parts Manual
USER REPLACEABLE PARTS - CONTROL BOARD
12
8
2
13
7
1
9
PENDANT
S1
+
4
MO
V3
+
3
14
15
14
5
6
11
Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
P/N
450060
450458
450957
450958
450965
450967
450970
450974
450975
450976
450978
450980
450983
450985
450987
DESCRIPTION
Screw, #8-32x1/4" Socket Head Cap
Relay, Adjustable Time Delay .25 - 5 Second
Nut, #8-32 Nylock
SCREW, #8-32 x 1.25" PANHEAD-HEX
FUSE .5 AMP
RELAY DPDT 24VDC
Motor Contactor, 24VDC
SHUNT 2-POS .100" JUMPER
BRACKET, TERMINAL BLOCK MOUNT
TERMINAL BLOCK 4 POS
Wire Harness, PCB to Power Block
Wire Harness, PCB to Lift Switch
Wire Harness, PCB to Relay
Wire, Power Relay to Power Block
Wire, Power Relay Jumper
12
TL
OL
V1
V3
GND
V2
GND
V1
GND
L1
NEU
GND
WHITE
GREEN
10
BLACK
1
V4
GND
UP
DN
impulse E/VHT
Parts Manual
USER REPLACEABLE PARTS - CONTROL MANIFOLD
9
5
9
8
5
6
8
8
7
9
8
9
10
12
1
V1
V2
FRONT
LIFT
REAR
LIFT
AUX
LINE #1
AUX
LINE #2
AUX
LINE #3
V3
V4
2
AUX
LINE #4
AUX
LINE #5
11
3
4
Parts List
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
P/N
450456
450483
450489
450988
450992
450993
450994
450996
450997
450998
601026
601046
DESCRIPTION
Manifold, eVHT Block - Fluid Tech
Adapter, -8 ORB to -6 JIC Swivel 90
Straight Adapter, 8MB-6MJ
#8 O ring Boss Plug, Hex Head
Valve, Spool, 2-Way, Normally Closed
Valve, Spool, 2-Way, Normally Open
Cartridge Valve, 2way NC Poppet #10
Nut, Cartridge Coil Retainer
Coil, HydraForce 24 VDC #10
Check Valve - Cartridge Style
Plug, 1/4 NPT
Straight Adapter, 6400-6-6
13
impulse E/VHT
Parts Manual
ASSEMBLY - AUXILIARY LINE
5
1
4
2
Parts List
ITEM
1
2
3
4
5
P/N
DESCRIPTION
Connector, Male Flat Face
Hose, -8FJX to 3/8 NPT male x 240" long x 3/8" ID
Hose, -6ORB to 3/8 NPT male x 30" long x 3/8" ID
Straight Adapter, 8MB-6MJ
Valve, Auxillary Line 3/8" Straight
305722
450448
450449
450489
602802
EXPLODED VIEW - PORTA-FRAME MANIFOLD
4
Parts List
ITEM
1
2
3
4
5
2
P/N
DESCRIPTION
Block, E/VHT Porta-Frame Manifold
Flow Control, .4 GPM Pressure Compensated
Flow Control, .5 GPM Pressure Compensated
Fitting, Hyd #6MBX - #6MJ
Fitting, Hyd #6MB - #6MB
450439
450991
450990
305720
305726
1
3
3
5
14
impulse E/VHT
Parts Manual
EXPLODED VIEW - UNLOAD BAR
3
2
5
1
4
6
Parts List
ITEM
1
2
3
4
5
6
P/N
450443
450858
450862
450863
450868
450940
450870
DESCRIPTION
Rod Eye, Impulse VHT Unlock
Fitting, Pneumatic, 1/8 NPT to 5/32 Press-to-Lock 90
Pneumatic Cylinder, 3/4" bore x 2" stroke spring return
Nut, 1/2-20 UNF Jam
Nut, 1/4-28 UNF Hex Jam
Weldment, Impulse-20 VHT Unload
Weldment, Impulse-18 VHT Unload
2
EXPLODED VIEW - UNLOCK BAR
3
5
6
1
4
Parts List
ITEM
1
2
3
4
5
6
P/N
450443
450858
450862
450863
450865
450868
DESCRIPTION
Rod Eye, Impulse VHT Unlock
Fitting, Pneumatic, 1/8 NPT to 5/32 Press-to-Lock 90
Pneumatic Cylinder, 3/4" bore x 2" stroke spring return
Nut, 1/2-20 UNF Jam
Weldment, Impulse VHT Unlock
Nut, 1/4-28 UNF Hex Jam
15
impulse E/VHT
Parts Manual
ASSEMBLY - CABINET TO MAINFRAME LINES
7
8
2
3
1
8
5
4
Parts List
ITEM
1
2
3
4
5
6
7
8
P/N
DESCRIPTION
305722
305801
305848
450452
450497
450497
450595
601046
Connector, Male Flat Face
Tubing, 5/32" Soft Nylon Natural
Tubing, 5/32" Soft Nylon Black
Hose Protector, eVHT Cabinet
Hose, E/VHT Cabinet to Lift
Hose, E/VHT Cabinet to Lift
Control Cord, 240" Four Conductor Mini-Line
Straight Adapter, 6400-6-6
ASSEMBLY - PORTA-FRAME HYDRAULIC HOSES
1
5
3
1
2
4
Parts List
ITEM
1
2
3
4
5
P/N
305724
305741
305753
450440
450446
DESCRIPTION
Fitting, Hyd #6MB - #6MJ w/ Orifice
HOSE, HYD. - MAN. TO LIFT 2 (FRONT)
Hose, -6FJX to -6FJX x 158" x 1/4" ID
Assembly, E/VHT Porta-Frame Manifold
Ram, Lift 4 1/2" bore x 10 5/8" stroke
16
17
450444-Tilt Switch
AWG 18/2 Outdoor Cord 180" Long
AWG 18/2 Outdoor Cord 200" Long
NC
450956-Overload Switch
COM
795431 - Spade Connector #6
450955-Switch Cover
620642-4 POS
Mini-change
Recepticle
Black
Green Red
White
450954-4 POS Terminal Block
impulse E/VHT
Parts Manual
ELECTRICAL HARNESS - PORTA-FRAME
XX
L1
18
500mA
FUSE
UP
UP
P
E
N
D
E
N
T
DN
DN
J10
250 VAC
120 VAC
FIELD WIRE
TERMINAL (24)
S1
LIFT
+
L1
LINE
.25 SEC
DELAY TIMER
T1
OL
TL
V2
UP
DN
MOV1
MOV2
TB1
OL
.25 SEC
DELAY TIMER
MACHINE
TL
9
3
120 VAC
10
4
18 VAC
C1
1
T1
D2
T1
J9
MO
TIME DELAY
RELAY (1)
MO
V3
D1
MO
MO
V3
12
J8
V1
UP
V4
MO
V3
XXX
D3
250 VAC
TB4
V1
V2
V4
DN
N2
N1
TB2
2
1
ELECTRIC MOTOR (1)
V1
D4
MOT
NUET
4
6
DN
8
XX
0
2
6
0
UP
4
0
8
V2
V1
DN
L/T
PENDENT
UP
DELAY
TIMER
1
1
TL
V3
HYDRAULIC VALUE COIL (4)
V4
OL
MACHINE
1
2
V
2A
4C
M1
6
8
0
XX
MOT
4
500mA
FUSE
RELAY COIL (3)
1V
2A
0C
CABINET
impulse E/VHT
Parts Manual
SCHEMATIC - CONTROL BOARD
19
WHITE
GREEN
4
605018 - Pendant Switch
692270 - Strain Relief Connector
EMPTY
RED
4
3
DOWN
UP
DOWN
BLACK
3
WIRING DIAGRAM - CONTROL PENDANT
620234 - Control Cord -30'
693020 - Spade Terminal #6 for
16-14 awg Wire
impulse E/VHT
Parts Manual
UP
G
FL
20
T2
450447
450447
T1
450445
V1
RL
RL
FL
T3
V2
T4
T5
450440
0.4 GPM 1.5
LPM
T
RELIEF,
ADJUSTABLE
SET AT 3600 P.S.I.
V3
V4
P
0.5 GPM
1.9 LPM
0.5 GPM
1.9 LPM
B
RL
FL
A
PUMP, AFC 0.66 GPM
MOTOR, 230 VAC
450496
MOTOR, 115 VAC
0.100"
450451
305724
450446
305724
TOWERS
0.100"
450446
impulse E/VHT
Parts Manual
HYDRAULIC SCHEMATIC
450472
450472
305848 - Black - 28"
305797
305848 - Black - 23"
21
305848 - Black - 16' 8"
305797
450883
305797
305797
450862
REAR UNLOCK
AIR CYLINDER
CABINET
305797
MACHINE
450950
450883
450889
450951
450937
450951
305848 - Black - 13' 8"
305801 - Natural - 13' 8"
450951
450854 - Flexible Conduit
305801 - Natural - 23"
450934
450934
450889
450937
450951
450854 - Flexible Conduit
450862
FRONT ULOCK
AIR CYLINDER
450862
FRONT UNLOAD
AIR CYLINDER
305797
305797
impulse E/VHT
Parts Manual
PNEUMATIC SCHEMATIC
P.O. Box 1368
Grand Island, Nebraska 68802-1368
Phone: 308/384-9747
Fax:
308/384-8966
www.chiefautomotive.com
Chief reserves the right to alter product specifications
and/or package components without notice.
450429 rev 1
2005 Chief Automotive Technologies