docTEL1A1 Series - Western Sales
download 
Report Transcription
TEL1A1 Series - Western Sales
TEL1A1 Series Libella™ EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Single-hole mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 1.0gpm flow control MODELS TEL1A1-D10E • TELS1A1 (Libella Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) TEL1A1-D10EM • TEL1A1-D10E (Libella Spout Kit) • TLM10 (Mixing Valve) TEL1A1-D10ET • TEL1A1-D10E (Libella Spout Kit) • TLT10 (Thermostatic Mixing Valve) COLORS/FINISHES • #CP Polished Chrome EcoPower CODES/STANDARDS • • • • • OPTIONAL ACCESSORIES • • THP3158#CP - 4" Cover Plate 71244T8CC - 8" Cover Plate PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered self-generating, EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. • • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1A1 Series Libella™ EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Max. 90% RH Flow Rate 0.18 gpc* - max 10 second On-Demand** (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm flow control Warranty Three year limited Water Saving On-Demand [10 sec.] faucet (0.18gpc) 30% less than Federal Standard (0.25gpc) 10% less than CAL Green (0.20gpc) *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).Libella 7-5/8” (194mm) (Ø42mm) 80° 1-15/16” (48mm) 5-1/2” (140mm) Ø1-5/8” (Ø42mm) 5-1/2” (140mm) TELC105 TELC101 3-5/8”(94mm) 4-5/8”(117mm) 3-5/16”(83mm) 7” (178mm) 7-5/8” (194mm) Controllers 1-3/4” (44mm) 1-5/8” (42mm) Ø1-5/8” 80° 1-15/16” (48mm) TELS1A5 TELS1A1 Controller 3-1/8” (80mm) Libella 2” (50mm) 2” (50mm) 3-1/8” (80mm) Max deck thicknessMax deck thickness 1-5/8” Libella (42mm) 5-5/8”(142mm) TELS1A5 TELS1A1 G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM Faucet hole Ø1-3/8” (Ø35mm) 3-5/16”(84mm) G1/2 Available Mixing Valves G1/2 G1/2 2-13/16” (71mm) 7/8” (23mm) Φ1-5/8”Φ (42mm) Hot/Cold Mixing Tee (TLM10) 3-3/16”(82mm) Faucet hole Ø1-3/8” (Ø35mm) 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01102, v.01 TEL1A5 Series Libella™ EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Single-hole mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 0.5gpm flow control MODELS TEL1A5-D10E • TELS1A5 (Libella Spout) • TELC105-D10E (Controller: 0.09gpc, 10 sec on-demand) TEL1A5-D10EM • TEL1A5-D10E (Libella Spout Kit) • TLM10 (Mixing Valve) TEL1A5-D10ET • TEL1A5-D10E (Libella Spout Kit) • TLT10 (Thermostatic Mixing Valve) TEL1A5-C20E • TELS1A5 (Libella Spout) • TELC105-C20E (Controller: 0.19gpc, 20 sec continuous) TEL1A5-C20EM • TEL1A5-C20E (Libella Spout Kit) • TLM10 (Mixing Valve) TEL1A5-C20ET • TEL1A5-C20E (Libella Spout Kit) • TLT10 (Thermostatic Mixing Valve) EcoPower PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered, self-generating EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. CODES/STANDARDS • • • • • COLORS/FINISHES • #CP Polished Chrome OPTIONAL ACCESSORIES • • THP3158#CP - 4" Cover Plate 71244T8CC - 8" Cover Plate • • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1A5 Series SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Libella™ EcoPower® Faucet Max. 90% RH 0.09 gpc* - max 10 second On-Demand** (0.09 gpc = 0.5 gpm x 10/60 sec) Water Saving On-Demand [10 sec.] faucet (0.09gpc) 64% less than Federal Standard (0.25gpc) 55% less than CAL Green (0.20gpc) Equipped with 0.5 gpm flow control Flow Rate 0.19 gpc* - 20 second Continuous*** (0.19 gpc = 0.5 gpm x 20/60 sec) Equipped with 0.5 gpm flow control Warranty Continuous [20 sec.] faucet (0.19gpc) 24% less than Federal Standard (0.25gpc) 5% less than CAL Green (0.20gpc) Three year limited *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). *** Continuous means that water is dispersed for a continuous 20 second cycle. Libella 7-5/8” (194mm) 1-15/16” (48mm) 5-1/2” (140mm) G1/2 Available Mixing Valves 3-5/16”(84mm) G1/2 3/8 COMPRESSION 1-7/16” (36mm) 1-11/16” (42mm) G1/2 compatible with ½ NPSM Faucet hole Ø1-3/8” (Ø35mm) Faucet hole Ø1-3/8” (Ø35mm) G1/2 2-1/2” (63mm) 3-5/16”(83mm) G1/2 Ø1-5/8” (Ø42mm) 5-1/2” (140mm) 3-5/8”(94mm) 4-5/8”(117mm) 7” (178mm) 80° TELC105 TELC101 1-3/4” (44mm) (Ø42mm) Controllers 3-1/8” (80mm) 7-5/8” (194mm) Controller 2-13/16” (71mm) 3-3/16”(82mm) 1-5/8” (42mm) Ø1-5/8” 80° 1-15/16” (48mm) TELS1A5 TELS1A1 3-1/8” 2” (50mm) 2” (50mm) (80mm) Max deck thickness Max deck thickness 1-5/8” LibellaLibella (42mm) 5-5/8”(142mm) TELS1A5 TELS1A1 7/8” (23mm) Hot/Cold Mixing Tee (TLM10) Φ1-5/8”Φ (42mm) G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01103 v.01 TEL1B1 Series Libella™ M EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Single-hole mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 1.0gpm flow control MODELS TEL1B1-D10E • TELS1B1 (Libella M Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) TEL1B1-D10EM • TEL1B1-D10E (Libella M Spout Kit) • TLM10 (Mixing Valve) TEL1B1-D10ET • TEL1B1-D10E (Libella M Spout Kit) • TLT10 (Thermostatic Mixing Valve) COLORS/FINISHES • #CP Polished Chrome EcoPower CODES/STANDARDS • • • • OPTIONAL ACCESSORIES • • • • THP3158#CP - 4" Cover Plate 71244T8CC - 8" Cover Plate PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered self-generating, EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1B1 Series Libella™ M EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Max. 90% RH Flow Rate 0.18 gpc* - max 10 second On-Demand** (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm flow control Warranty Three year limited Water Saving On-Demand [10 sec.] faucet (0.18gpc) 30% less than Federal Standard (0.25gpc) 10% less than CAL Green (0.20gpc) *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). Controller Controllers Libella Libella-M M TELC105 TELC101 1-5/8” (42mm) 2” (50mm) Max deck thickness 6” (150mm) 3-5/16”(83mm) 1-3/4” (44mm) 7-5/8” (194mm) 6-1/2” (162mm) 80° Ø1-7/8” (Ø48mm) 3-5/8”(94mm) 4-5/8”(117mm) 5-5/8”(142mm) 8” (203mm) 7” (178mm) TELS1B5 TELS1B1 G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM 3-5/16”(84mm) G1/2 Faucet hole Ø1-3/8” (Ø35mm) G1/2 G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION 2-13/16” (71mm) 7/8” (23mm) Φ1-5/8”Φ (42mm) Hot/Cold Mixing Tee (TLM10) 3-3/16”(82mm) Available Mixing Valves G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01104, v.01 TEL1B5 Series Libella™ M EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Single-hole mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 0.5gpm flow control MODELS TEL1B5-D10E • TELS1B5 (Libella M Spout) • TELC105-D10E (Controller: 0.09gpc, 10 sec on-demand) TEL1B5-D10EM • TEL1B5-D10E (Libella M Spout Kit) • TLM10 (Mixing Valve) TEL1B1-D10ET • TEL1B1-D10E (Libella M Spout Kit) • TLT10 (Thermostatic Mixing Valve) TEL1B5-C20E • TELS1B5 (Libella M Spout) • TELC105-C20E (Controller: 0.19gpc, 20 sec continuous) TEL1B5-C20EM • TEL1B5-C20E (Libella M Spout Kit) • TLM10 (Mixing Valve) TEL1B5-C20ET • TEL1B5-C20E (Libella M Spout Kit) • TLT10 (Thermostatic Mixing Valve) EcoPower PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered, self-generating EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. CODES/STANDARDS • • • • • COLORS/FINISHES • #CP Polished Chrome OPTIONAL ACCESSORIES • • THP3158#CP - 4" Cover Plate 71244T8CC - 8" Cover Plate • • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1B5 Series Libella™ M EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Max. 90% RH 0.09 gpc* - max 10 second On-Demand** (0.09 gpc = 0.5 gpm x 10/60 sec) Flow Rate Warranty Water Saving On-Demand [10 sec.] faucet (0.09gpc) 64% less than Federal Standard (0.25gpc) 55% les than CAL Green (0.20gpc) Equipped with 0.5 gpm flow control 0.19 gpc* - 20 second Continuous*** (0.19 gpc = 0.5 gpm x 20/60 sec) Equipped with 0.5 gpm flow control Continuous [20 sec.] faucet (0.19gpc) 24% less than Federal Standard (0.25gpc) 5% less than CAL Green (0.20gpc) Three year limited *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). *** Continuous means that water is dispersed for a continuous 20 second cycle. Controller Controllers Libella M Libella-M 1-5/8” (42mm) 3-5/16”(83mm) 1-3/4” (44mm) 2” (50mm) Max deck thickness 6” (150mm) 4-5/8”(117mm) 5-5/8”(142mm) 7-5/8” (194mm) 6-1/2” (162mm) 80° Ø1-7/8” (Ø48mm) 3-5/8”(94mm) TELC105 TELC101 8” (203mm) 7” (178mm) TELS1B5 TELS1B1 G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM 3-5/16”(84mm) G1/2 Faucet hole Ø1-3/8” (Ø35mm) G1/2 G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION 2-13/16” (71mm) 7/8” (23mm) Φ1-5/8”Φ (42mm) 3-3/16”(82mm) Available Mixing Valves G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) Hot/Cold Mixing Tee (TLM10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01105, v.01 TEL1C1 Series Libella™ Wall-Mount EcoPower® Faucet FEATURES • Self-generating hydropowered EcoPower system • No minimum daily usage requirement • Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution • Vandal resistant aerator housing • Durable chrome plated spout body • Wall mount • Kit includes spout body, controller box, and mounting hardware - less supply lines • Equipped with 1.0gpm flow control MODELS TEL1C1-D10E • TELS1C1 (Libella Wall-Mount Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) TEL1C1-D10EM • TEL1C1-D10E (Libella Wall-Mount Spout Kit) • TLM10 (Mixing Valve) TEL1C1-D10ET • TEL1C1-D10E (Libella Wall-Mount Spout Kit) • TLT10 (Thermostatic Mixing Valve) COLORS/FINISHES • #CP Polished Chrome EcoPower CODES/STANDARDS • • • • • • PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered self-generating, EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1C1 Series Libella™ Wall-Mount EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Max. 90% RH 0.18 gpc* - max 10 second On-Demand** Flow Rate (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm flow control Warranty Three year limited Water Saving On-Demand [10 sec.] faucet (0.18gpc) 30% less than Federal Standard (0.25gpc) 10% less than CAL Green (0.20gpc) *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). Controller Libella Wall-Mount Libella-M Wall Controllers TELS1D5 TELS1D1 TELC105 TELC101 80° 2-3/8” (60mm) 8-1/4” (210mm) 4-5/8”(117mm) 3-5/16”(83mm) 5-5/8”(142mm) 9-1/2” (242mm) 7” (178mm) 1-5/8” (42mm) 3-5/8”(94mm) 1-3/4” (44mm) Ø2-3/16” (Ø55mm) G1/2 Finished wall 1-11/16” (42mm) G1/2 compatible with ½ NPSM 3-5/16”(84mm) G1/2 Available Mixing Valves 2-13/16” (71mm) G1/2 7/8” (23mm) Φ1-5/8”Φ (42mm) Hot/Cold Mixing Tee (TLM10) 3-3/16”(82mm) G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01106, v.01 TEL1C5 Series Libella™ Wall-Mount EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Wall-mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 0.5gpm flow control EcoPower MODELS TEL1C5-D10E • TELS1C5 (Libella Wall-Mount Spout) • TELC105-D10E (Controller: 0.09gpc, 10 sec on-demand) TEL1C5-D10EM • TEL1C5-D10E (Libella Wall-Mount Spout Kit) • TLM10 (Mixing Valve) TEL1C5-D10ET • TEL1C5-D10E (Libella Wall-Mount Spout Kit) • TLT10 (Thermostatic Mixing Valve) TEL1C5-C20E • TELS1C5 (Libella Wall-Mount Spout) • TELC105-C20E (Controller: 0.19gpc, 20 sec continuous) TEL1C5-C20EM • TEL1C5-C20E (Libella Wall-Mount Spout Kit) • TLM10 (Mixing Valve) TEL1C5-C20ET • TEL1C5-C20E (Libella Wall-Mount Spout Kit) • TLT10 (Thermostatic Mixing Valve) COLORS/FINISHES • #CP Polished Chrome PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered, self-generating EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. CODES/STANDARDS • • • • • • • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1C5 Series Libella™ Wall-Mount EcoPower® Faucet SPECIFICATIONS Power Supply NOTE EcoPower Sensor Detection Range Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Max. 90% RH 0.09 gpc* - max 10 second On-Demand** (0.09 gpc = 0.5 gpm x 10/60 sec) Equipped with 0.5 gpm flow control Flow Rate 0.19 gpc* - 20 second Continuous*** (0.19 gpc = 0.5 gpm x 20/60 sec) Equipped with 0.5 gpm flow control Warranty Water Saving On-Demand [10 sec.] faucet (0.09gpc) 64% less than Federal Standard (0.25gpc) 55% less than CAL Green (0.20gpc) Continuous [20 sec.] faucet (0.19gpc) 24% less than Federal Standard (0.25gpc) 5% less than CAL Green (0.20gpc) Three year limited *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). *** Continuous means that water is dispersed for a continuous 20 second cycle. Libella Libella Wall-Mount Wall Controller Controllers TELS1C5 TELS1C1 TELC105 TELC101 1-5/8” (42mm) 3-5/8”(94mm) 4-5/8”(117mm) 3-5/16”(83mm) 80° 1-3/4” (44mm) 2-3/8” (60mm) 6-3/4” (170mm) 7” (178mm) 5-5/8”(142mm) 7-15/16” (202mm) Ø2-3/16” (Ø55mm) G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM Finished wall 3-5/16”(84mm) G1/2 Available Mixing Valves 2-13/16” (71mm) G1/2 7/8” (23mm) Φ1-5/8”Φ (42mm) Hot/Cold Mixing Tee (TLM10) 3-3/16”(82mm) G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01107, v.01 TEL1D1 Series Libella™ Wall-Mount M EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Wall-mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 1.0gpm flow control MODELS TEL1D1-D10E • TELS1D1 (Libella Wall-Mount M Spout) • TELC101-D10E (Controller: 0.18gpc, 10 sec on-demand) EcoPower TEL1D1-D10EM • TEL1D1-D10E (Libella Wall-Mount M Spout Kit) • TLM10 (Mixing Valve) TEL1D1-D10ET • TEL1D1-D10E (Libella Wall-Mount M Spout Kit) • TLT10 (Thermostatic Mixing Valve) COLORS/FINISHES • #CP Polished Chrome CODES/STANDARDS • • • • PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered self-generating, EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.18gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. • • • * Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1D1 Series Libella™ Wall-Mount M EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Max. 90% RH 0.18 gpc* - max 10 second On-Demand** Flow Rate (0.18 gpc = 1.0 gpm x 10/60 seconds) Equipped with 1.0 gpm flow control Warranty Three year limited Water Saving On-Demand [10 sec.] faucet (0.18gpc) 28% less than Federal Standard (0.25gpc) 10% less than CAL Green (0.20gpc) *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). Controller Libella Wall-Mount M Libella-M Wall Controllers 3-5/8”(94mm) TELC105 TELC101 TELS1D5 TELS1D1 1-5/8” (42mm) 4-5/8”(117mm) 3-5/16”(83mm) 80° 1-3/4” (44mm) 2-3/8” (60mm) 8-1/4” (210mm) 7” (178mm) 5-5/8”(142mm) 9-1/2” (242mm) Ø2-3/16” (Ø55mm) G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM Finished wall Available Mixing Valves 3-5/16”(84mm) G1/2 2-13/16” (71mm) G1/2 3-3/16”(82mm) G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION 7/8” (23mm) Φ1-5/8”Φ (42mm) G1/2 compatible with ½ NPSM Hot/Cold Mixing Tee (TLM10) Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01108, v.01 TEL1D5 Series Libella™ Wall-Mount M EcoPower® Faucet FEATURES • • • • • • • • Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Wall-mount installation Kit includes spout body, controller box, and mounting hardware - less supply lines Equipped with 0.5gpm flow control MODELS TEL1D5-D10E • TELS1D5 (Libella Wall-Mount M Spout) • TELC105-D10E (Controller: 0.09gpc, 10 sec on-demand) TEL1D5-D10EM • TEL1D5-D10E (Libella Wall-Mount M Spout Kit) • TLM10 (Mixing Valve) TEL1D5-D10ET • TEL1D5-D10E (Libella Wall-Mount M Spout Kit) • TLT10 (Thermostatic Mixing Valve) TEL1D5-C20E • TELS1D5 (Libella Wall-Mount M Spout) • TELC105-C20E (Controller: 0.19gpc, 20 sec continuous) TEL1D5-C20EM • TEL1D5-C20E (Libella Wall-Mount M Spout Kit) • TLM10 (Mixing Valve) TEL1D5-C20ET • TEL1D5-C20E (Libella Wall-Mount M Spout Kit) • TLT10 (Thermostatic Mixing Valve) EcoPower PRODUCT SPECIFICATION Product shall have hydropowered, self-generating EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor. CODES/STANDARDS • • • • • • • COLORS/FINISHES • • * #CP Polished Chrome Self-generating hydropowered EcoPower system No minimum daily usage requirement Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution Vandal resistant aerator housing Durable chrome plated spout body Wall mount installation Kit includes spout body, controller box , and mounting hardware - less supply lines Equipped with 0.5gpm flow control For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets. LOW-LEAD TEL1D5 Series Libella™ Wall-Mount M EcoPower® Faucet SPECIFICATIONS Power Supply Sensor Detection Range NOTE EcoPower Water Supply Pressure Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa) Water Supply G1/2 (1/2 NPSM compatible) Inlet Temperature Range 39-110°F(4-42°C) Ambient Temperature 32-104°F(0-40°C) Humidity Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage. 5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting Max. 90% RH 0.09 gpc* - max 10 second On-Demand** (0.09 gpc = 0.5 gpm x 10/60 sec) Equipped with 0.5 gpm flow control Flow Rate 0.19 gpc* - 20 second Continuous*** (0.19 gpc = 0.5 gpm x 20/60 sec) Equipped with 0.5 gpm flow control Warranty Water Saving On-Demand [10 sec.] faucet (0.09gpc) 64% less than Federal Standard (0.25gpc) 55% less than CAL Green (0.20gpc) Continuous [20 sec.] faucet (0.19gpc) 24% less than Federal Standard (0.25gpc) 5% less than CAL Green (0.20gpc) Three year limited *Gallons per cycle (gpc) is the amount of water per usage cycle. ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). *** Continuous means that water is dispersed for a continuous 20 second cycle. LibellaLibella-M Wall-Mount M Wall Controller Controllers TELC105 TELC101 TELS1D5 TELS1D1 1-5/8” (42mm) 3-5/8”(94mm) 4-5/8”(117mm) 3-5/16”(83mm) 80° 1-3/4” (44mm) 2-3/8” (60mm) 8-1/4” (210mm) 7” (178mm) 5-5/8”(142mm) 9-1/2” (242mm) Ø2-3/16” (Ø55mm) G1/2 1-11/16” (42mm) G1/2 compatible with ½ NPSM Finished wall 3-5/16”(84mm) G1/2 Available Mixing Valves 2-13/16” (71mm) G1/2 7/8” (23mm) Φ1-5/8”Φ (42mm) Hot/Cold Mixing Tee (TLM10) 3-3/16”(82mm) G1/2 1-7/16” (36mm) 2-1/2” (63mm) 3/8 COMPRESSION G1/2 compatible with ½ NPSM Thermostatic Mixing Valve (TLT10) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA #SS-01109 v.01
