docLEGNo / WooD - Specialtytools.com
download 
Report Transcription
LEGNo / WooD - Specialtytools.com
LEGNo / WOOD Tool holders catalogue Parts of your business Tool holders catalogue Parts of your business may 2009 2nd edition Index 2 3-6 7 - 10 11 - 15 16 - 20 21 22 23 24 - 25 26 27 28 - 29 30 31 - 38 39 40 41 - 49 50 - 51 52 53 - 57 58 - 60 61 62 63 64 65 - 68 69 70 - 71 72 - 78 79 80 81 - 83 84 85 - 87 88 89 90 - 93 94 95 96 97 98 99 - 100 101 102 103 104 105 106 107 108 109 110 111 112 Tool holders HSK Type E 25-32-40-50 Tool holders Type HSK 50F DIN 69893 Tool holders Type HSK 50E DIN 69893 Tool holders Type HSK 63F DIN 69893 Tool holders Type HSK 63E DIN 69893 Tool holders HSK63E shrink fit chucks - Tool holders Type HSK Tool holders Type HSK 63F DIN 69893 Essetre Tool holders Type HSK40E Alberti Tool holders Type HSK Type “Weinig” Tool holders Type HSK 63C DIN 69893 Tool holders ISO 10 - Tool holders ISO 15, ISO 20, ISO25 for electrospindle “Colombo & Giordano” - ELTE Tool holders ISO 25 Tool holders ISO 25 Flange 38 - Tool holders ISO 30 with toothed flange Tool holders ISO 30 Reduction from ISO/DIN 69871/A to HSK-R - Tool holders ISO 30 “Thermwood” Tool holders HSK63F “Thermwood” - Tool holders Type BT20 Tool holders ISO 30 Tool holders ISO 35 with Flange BT Tool holders ISO 35 with Flange BT - Tool holders ISO 40 with Flange DIN 69871 Tool holders ISO 40 Tool holders with threaded nut Tool holders with morse taper Tool holders with morse taper Nut with double thread - Tool holders Paolino Bacci - ER Collet holder cylindrical shank Drill holder with quick change Reduction sleeve from ISO/DIN 69871/A with internal collet to hold HSK shanks - Digital height measuring device Cylindrical connection Collets CNC Wood Collets - Nut TG Stiff quick change tap collets without overload protection - Quick change clutch tap collets with overload protection Nut Hermetic nut for collet chuck capacity 2/16 3/20 - Capacity Disks Pull studs Reduced flanged cap - Expanded flanged cap Locking wrenches for nuts Dynamometrical wrench Tooling clamper Security locking system IMS - Shrink machines Release kit IMS - Clamping chucks HSK - New Petal collets Locking-unlocking system for plastic fork holder Collets for clamping tool holders with niploy treatment for electrospindle Cone cleaner - Trolley Accuracy runout Balancing Diagrams Pull stud angle 45° DIN 7388/2-B and Pull stud angle 15° DIN 69872 Protective treatments Difference between certified and uncertified pull stud Special features of titan tool holders Make and model of HSK spindle CNC router Make and model of CNC router Collet dimensions 2 Tool holders HSK Type E 25-32-40-50 Collet chuck holders Code HSK25E29023 HSK32E29023 HSK32E29025 HSK32E29026 HSK40E29024 HSK40E29026 HSK40E29027 Code HSK50E29026 HSK50E29026 HSK50E29026 Capacity Description 1-10 1-10 1-13 1-16 1-10 1-16 1-20 Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Capacity Description 1-16 1-20 1-26 Collet chucks holders Collet chucks holders Collet chucks holders Collet type ER16 ER16 ER20 ER25 ER16 ER 25 ER 32 Collet type ER 25 ER 32 ER 40 L Min. D HSK size 40 40 40 60 60 70 70 22 22 28 35 28 42 50 HSK-E-25 HSK-E-32 HSK-E-32 HSK-E-32 HSK-E-40 HSK-E-40 HSK-E-40 L Min. D HSK size 70 70 70 42 50 63 HSK-E-50 HSK-E-50 HSK-E-50 Special tool holders are made on request 3 Tool holders Type HSK 50F DIN 69893 Collet chucks holders for Collets ER - ort25 Code WF101 WF102 WF103 WF104 WF105 WF108 WF109 WF110 WF111 WF112 WF114 WF116 Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER16 Collet chucks holders without Lh nut ER16 Collet chucks holders with Lh nut ER25 Collet chucks holders without Lh nut ER25 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 L1 L D Capacity 50 60 28 1/10 50 50 60 42 1/16 50 50 62,5 50 1/20 50 50 60 28 1/10 50 50 60 42 1/16 50 50 62,5 50 1/20 50 Code WF122 WF124 WF126 WF128 WF132 WF134 WF136 WF138 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut L1 60 60 60 60 60 60 60 60 Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A For collets see page from 72 to 79 Special tool holders are made on request L D Capacity 76,5 63 3/30 76,5 60 3/25 76,5 63 3/30 76,5 60 3/25 4 Tool holders Type HSK 50F DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WF1012 WF1014 WF1016 WF1018 Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40 Collet chucks holders with embedded nut with ring ER32 Collet chucks holders with embedded nut with ring ER40 For collets see page from 72 to 79 Special tool holders are made on request L1 68 76 68 76 L 72 80 72 80 D 50 63 63 73 5 Tool holders Type HSK 50F DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WF142 WF144 WF146 WF148 WF150 WF151 Description L D Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor 93 103 123 203 80 150 30 30 30 30 1”1/4 1”1/4 L 93 103 123 203 D 35 35 35 35 L 93 103 123 203 200 D 40 40 40 40 50 Mill holder arbor diameter 35 Code WF152 WF154 WF156 WF158 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor diameter 40 Code WF162 WF164 WF166 WF168 WF169 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars RECESSED END CAP Arbors are supplied with reduced blocked Blocking type specifications are always needed FLANGED END CAP Special tool holders are made on request 6 Tool holders Type HSK 50F DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WF181 WF182 WF183 WF184 WF185 WF186 WF187 WF188 WF189 WF190 WF191 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Mill holder for cylindrical shank Type Weldon DIN 1835 Code WF191 WF192 WF193 WF194 WF195 WF196 WF197 WF198 WF199 WF200 WF201 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Special tool holders are made on request 7 Tool holders Type HSK 50E DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 Code WE101 WE102 WE106 WE107 WE109 WE110 WE103 WE105 WE104 WE108 WE114 WE116 WE122 WE124 WE132 WE134 WE126 WE128 WE136 WE138 Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut Lh ER16 Collet chucks holders without nut Lh ER16 Collet chucks holders with nut Lh ER25 Collet chucks holders without nut Lh ER25 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 ORT25A Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut For collets see page from 72 to 79 Special tool holders are made on request L1 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 L D Capacity 62,0 28 1/10 62,0 28 62,0 42 1/16 62,0 42 62,5 50 1/20 62,5 50 76,5 63 3/30 76,5 63 76,5 60 76,5 60 3/25 8 Tool holders Type HSK 50E DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WE1012 WE1014 WE1016 WE1018 Description Collet chucks holders with emboded nut Collet chucks holders with emboded nut Collet chucks holders with embedded nut with ring Collet chucks holders with embedded nut with ring Collet Type ER32 ER40 ER32 ER40 For collets see page from 72 to 79 Special tool holders are made on request L1 68 76 68 76 L 72 80 72 80 D 50 63 63 73 9 Tool holders Type HSK 50E DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WE142 WE144 WE146 WE148 WE150 WE151 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 150 D 30 30 30 30 1”1/4 1”1/4 Mill holder arbor diameter 35 Code WE152 WE154 WE156 WE158 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 35 35 35 35 Mill holder arbor diameter 40 Code WE162 WE164 WE166 WE168 WE168 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars L 93 103 123 203 200 D 40 40 40 40 50 RECESSED END CAP Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request FLANGED END CAP 10 Tool holders Type HSK 50E DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WE181 WE182 WE183 WE184 WE185 WE186 WE187 WE188 WE189 WE190 WE191 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Mill holder for cylindrical shank Type Weldon DIN 1835 Code d D WE191 6 25 WE192 8 28 WE193 10 35 WE194 12 42 WE195 16 48 WE196 20 52 WE197 25 65 WE198 1/4” 25 WE199 1/2” 42 WE200 3/4” 52 WE201 1” 65 L 70 70 70 70 70 70 110 70 70 70 110 Special tool holders are made on request 11 Tool holders Type HSK 63F DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 - TG Code WF201 WF202 WF239 WF240 WF202-L100 WF202-L160 WF203-L100 WF203-L160 WF203 WF205 WF241 WF242 WF208-L100 WF208-L160 WF204 WF208 WF214 WF216 WF222-L100 WF222-L160 WF222 WF224 WF232 WF234 WF226 WF228 WF236 WF238 WF204TG75 WF204TG100 WF204TG150 Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with Lh nut ER16 Collet chucks holders without Lh nut ER16 Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with Lh nut ER25 Collet chucks holders without Lh nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 ER32 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A Collet chucks holders with nut TG75 Collet chucks holders with nut TG100 Collet chucks holders with nut TG150 For “SCM”,“Biesse”, “Essetre”,”Masterwood”, ”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato” Special tool holders are made on request L1 50 50 50 50 90 150 90 150 50 50 50 50 87,5 147,5 60 60 60 60 83,5 143,5 60 60 60 60 60 60 60 60 L 60 D Cap. 28 1/10 60 28 100 160 100 160 60 22 22 35 1/16 35 42 60 42 100 50 1/20 160 50 72,5 50 72,5 50 100 63 3/30 160 63 76,5 63 76,5 63 76,5 60 3/25 76,5 60 100 100 100 12 Tool holders Type HSK 63F DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WF2012 WF2014 WF2016 WF2018 Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40 Collet chucks holders with embedded nut with ring ER32 Collet chucks holders with embedded nut with ring ER40 For collets see page from 72 to 79 Special tool holders are made on request L1 68 76 68 76 L 72 80 72 80 D 50 63 63 73 13 Tool holders Type HSK63F DIN 69893 Mill holder arbor diameter 20 - 25 - 30 - 1”1/4 Code WF240 WF241 WF242 WF243 WF244 WF245 WF246 WF247 WF248 WF249 WF250 WF251 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor A 33 33 33 42 33 42 33 42 33 42 33 33 L 70 70 93 93 103 103 123 123 203 203 80 150 D 20 25 30 30 30 30 30 30 30 30 1”1/4 1”1/4 A 33 42 33 42 33 42 33 42 L 93 93 103 103 123 123 203 203 D 35 35 35 35 35 35 35 35 A 33 42 33 42 33 42 33 42 - L 93 93 103 103 123 123 203 203 200 Mill holder arbor diameter 35 Code WF252 WF253 WF254 WF255 WF256 WF257 WF258 WF259 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor diameter 40 Code WF262 WF263 WF264 WF265 WF266 WF267 WF268 WF269 WF279 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars D 40 40 40 40 40 40 40 40 63 Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request RECESSED END CAP FLANGED END CAP 14 Tool holders Type HSK 63F DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WF281 WF282 WF283 WF284 WF285 WF286 WF287 WF288 WF289 WF290 WF291 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 For “SCM”,“Biesse”,“Essetre”, ”Masterwood”,”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato” Mill holder for cylindrical shank Type Weldon DIN 1835 Code d WF291 6 WF292 8 WF293 10 WF294 12 WF295 16 WF296 20 WF297 25 WF298 1/4” WF299 1/2” WF300 3/4” WF301 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 For “SCM”,“Biesse”,“Essetre”, ”Masterwood”,”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato” Special tool holders are made on request 15 Tool holders Type HSK 63F Tool holders Type HSK 63F DIN 69893 Code WF240ch8P45 WF241ch8 WF242ch8 WF240ch8P80 WF241ch8P80 WF242ch8P80 SW 8x8 8x8 8x8 8x8 8x8 8x8 D 25 25 30 25 30 20 L 70 70 93 70 93 70 d 40 40 48 40 48 40 P 45 45 45 80 80 80 Tap holder double HSK 63F Code WHSK63F29076 d 19 D 35 L 80 WEI size M3/M12 Tool holders HSK63F shrink fit chucks Code D WF005 3 WF006 4 WF007 5 WF008 6 WF009 8 WF010 10 WF011 12 WF012 14 WF013 16 WF014 18 WF015 20 WF016 25 WF017 32 WF018 1/4 WF019 1/2 WF020 3/4 WF021 1“ L 80 80 80 80 80 85 90 90 95 95 95 95 95 80 90 95 95 Code WF035 WF036 WF037 WF038 WF039 WF040 WF041 WF042 WF043 WF044 WF045 WF046 WF047 WF048 WF049 WF050 WF051 D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4 1/2 3/4 1“ L 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Special tool holders are made on request 16 Tool holders Type HSK 63E DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 Code WE237 WE238 WE239 WE240 WE242-L100 WE243-L160 WE241 WE243 WE245 WE247 WE244-L100 WE245-L160 WE204 WE208 WE214 WE216 WE246-L100 WE247-L160 WE222 WE224 WE232 WE234 WE222-L100 WE222-L160 WE226 WE228 WE236 WE238 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type L1 L D Capacity ER16 ER16 ER16 ER16 ER16 ER16 ER25 ER25 ER25 ER25 ER25 ER25 ER32 ER32 ER32 ER32 ER32 ER32 ER40 ER40 ER40 ER40 ER40 ER40 ORT25A ORT25A ORT25A ORT25A 50 50 50 50 90 150 50 50 50 50 90 150 60 60 60 60 87,5 147,5 60 60 60 60 83,5 143,5 60 60 60 60 60 28 1/10 60 28 For collets see page from 72 to 79 Special tool holders are made on request 100 22 160 22 60 42 60 1/16 42 100 35 160 35 70 50 1/20 70 50 100 50 160 50 70 63 70 3/30 63 100 63 160 63 70 60 70 60 3/25 17 Tool holders Type HSK 63E DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WE2012 WE2014 WE2016 WE2018 Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40 Collet chucks holders with embedded nut with ring ER32 Collet chucks holders with embedded nut with ring ER40 For collets see page from 72 to 79 Special tool holders are made on request L1 68 76 68 76 L 72 80 72 80 D 50 63 63 73 18 Tool holders Type HSK 63E DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WE242 WE244 WE246 WE248 WE250 WE251 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 150 D 30 30 30 30 1“ 1/4 1“ 1/4 Mill holder arbor diameter 35 Code WE252 WE254 WE256 WE258 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 35 35 35 35 Mill holder arbor diameter 40 Code WE262 WE264 WE266 WE268 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 40 40 40 40 WE279 Black Bars 200 63 RECESSED END CAP Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request FLANGED END CAP 19 Tool holders Type HSK 63E DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WE281 WE282 WE283 WE284 WE285 WE286 WE287 WE288 WE289 WE290 WE291 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Mill holder for cylindrical shank Type Weldon DIN 1835 Code WE291 WE292 WE293 WE294 WE295 WE296 WE297 WE298 WE299 WE300 WE301 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Special tool holders are made on request 20 Tool holders Type HSK 63E DIN 69893 Code WE240ch8P45 WE241ch8P45 WE242ch8P45 WE241ch8P80 WE242ch8P80 WE240ch8P80 SW 8x8 8x8 8x8 8x8 8x8 8x8 D 20 25 30 25 30 20 L 70 70 93 70 93 70 d 40 40 48 40 48 40 P 45 45 45 80 80 80 Special tool holders are made on request 21 Tool holders HSK63E shrink fit chucks Code WE005 WE006 WE007 WE008 WE009 WE010 WE011 WE012 WE013 WE014 WE015 WE016 WE017 WE018 WE019 WE020 WE021 D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4“ 1/2“ 3/4“ 1“ L 80 80 80 80 80 85 90 90 95 95 95 95 95 80 90 95 95 Code D L WE035 3 120 WE036 4 120 WE037 5 120 WE038 6 120 WE039 8 120 WE040 10 120 WE041 12 120 WE042 14 120 WE043 16 120 WE044 18 120 WE045 20 120 WE046 25 120 WE047 32 120 WE048 1/4“ 120 WE049 1/2“ 120 WE050 3/4“ 120 WE051 1“ 120 Tool holders Type HSK Code WFHSK85S-200 WFHSK85S-320 WFHSK100B-200 WFHSK100B-300 D 40 50 50 50 d 40 40 - L 200 300 200 350 Type SCM-HSK85-S SCM-HSK85-S SAC-SUERI SAC-SUERI Special tool holders are made on request 22 Tool holders Type HSK 63F DIN 69893 ESSETRE Collet chucks holders capacity 3/20 for Collets ER32 Code WF204-ES WF208-ES WF214-ES WF216-ES Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 L1 57 57 57 57 L 69,5 D 50 69,5 80 Collet chucks holders capacity 3/30 for Collets ER40 for Collets ORT25A Code WF222-ES WF224-ES WF226-ES WF228-ES WF232-ES WF234-ES WF236-ES WF238-ES Description Collet Type Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A Special tool holders are made on request L1 57 57 57 57 57 57 57 57 L 73,5 D 63 73,5 60 73,5 63 73,5 60 23 Tool holders Type HSK40E Alberti Collet chucks holders capacity 3/20 for Collets ER32 Code WE104-AL WE108-AL WE114-AL WE116-AL Code WE142-AL WE144-AL WE146-AL WE148-AL WE150-AL WE151-AL Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with nut Lh ER32 Collet chucks holders without nut Lh ER32 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 150 L1 50 50 50 50 L 62,5 D 50 62,5 80 D 30 30 30 30 1”1/4 1”1/4 For collets see page from 72 to 79 recessed end cap flanged end cap Special tool holders are made on request 24 Tool holders Type HSK Type “Weinig” Mill holder arbor 30 - 1” 1/4 Code WW242 WW244 WW246 WW248 WW250 WW251 WW251B Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 150 200 D 30 30 30 30 1“ 1/4 1“ 1/4 2“ L 93 103 123 203 D 35 35 35 35 Mill holder arbor diameter 35 Code WW252 WW254 WW256 WW258 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor diameter 40 Code WW262 WW264 WW266 WW268 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 40 40 40 40 L 93 103 123 203 D 50 50 50 50 Mill holder arbor diameter 50 Code WW272 WW274 WW276 WW278 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor RECESSED END CAP Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request FLANGED END CAP 25 Knives arbor holder HSK Type “Weinig” Code Description WW105 Knives arbor holder WW110 Knives arbor holder L 150 200 D 90 90 Collet chuck ER32-ER40-ORT25 Code WW131 WW132 WW133 Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders with nut ER40 Collet chucks holders with nut ORT25 L1 60 60 60 Blank Bars Mill holder arbor Code WW241 WW251 WW261 WW271 WW281 Description Blank Bars Blank Bars Blank Bars Blank Bars Blank Bars L 200 200 200 200 200 D 30 35 40 50 90 Special tool holders are made on request L 72,5 76,5 76,5 D 50 63 60 Capacity 1/20 3/30 3/25 26 Tool holders Type HSK 63C DIN 69893 Mill holder arbor diameter 30 - 1” 1/4 Code WC242 WC244 WC246 WC248 WC250 WC251 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 150 D 30 30 30 30 1“ 1/4 1“ 1/4 Mill holder arbor diameter 35 Code WC252 WC254 WC256 WC258 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 35 35 35 35 Mill holder arbor diameter 40 Code WC262 WC264 WC266 WC268 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 40 40 40 40 WC279 Blambers 200 50 For Celaschi RECESSED END CAP Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request FLANGED END CAP 27 Tool holders ISO 10 Collet chuck holders ER11 - ER16 Code WIS010ER11 WIS010ER16 Description Tool holders ISO 10 ER11 Tool holders ISO 10 ER16 ER 11 16 L 30 40 D 14 22 Capacity 1/7 1/10 Tool holders ISO 15, ISO 20, ISO25 for electrospindle “Colombo & Giordano” - ELTE Code W151 W153 W202 W204 W205 W206 W207 Description Capacity Collet Type Collet chucks holders 1–7 ER11 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 13 ER20 Collet chucks holders 1 – 16 ER25 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 10 ER16 L 41.6 55.6 41.6 55.6 55 40 40 L1 35 45 35 45 45 30 30 D ISO Type 16 15 C&G 22 15 C&G 22 20 C&G 28 20 C&G 42 25 C&G 22 20 ELTE 28 20 ELTE Special tool holders are made on request Capacity 1/7 1/10 1/13 1/16 1/10 1/10 1/10 28 Tool holders ISO 25 with toothed flange Collet chucks holders capacity 3/20 for Collets ER32 Code W304 W308 W314 W316 Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 L 55 D 50 55 50 Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 for Collets ORT 25A Code W322 W324 W326 W328 W332 W334 W336 W338 Description Collet Type Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A L 72 D 63 72 60 72 63 72 60 For “Masterwood” For collets see page from 72 to 79 Tool holders ISO 25 for electrospindle “Faemat” Code W362 W364 W366 Description Collet chucks holders Collet chucks holders Collet chucks holders Capacity 1–7 1 – 10 1 – 13 Collet Type ER11 ER16 ER20 Special tool holders are made on request L 30 30 40 L1 20.5 20.5 30.5 D 16 22 28 29 Tool holders ISO 25 with Flange DIN 69871 Collet chucks holders capacity 1/10 for Collets ER16 Code W340 W341 Description Collet chucks holders with nut Collet chucks holders without nut Collet Type ER16 ER16 L1 30,5 30,5 L 40 40 D 22 22 L1 40 40 40 40 L 51 D 42 51 42 L1 40 40 40 40 L 51 D 50 51 50 Collet chucks holders capacity 1/16 for Collets ER25 Code W342 W344 W346 W348 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER25 ER25 ER25 ER25 Collet chucks holders capacity 3/20 for Collets ER32 Code W352 W354 W356 W358 Description Collet Type ER32 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut Collet chucks holders without Lh nut ER32 For collets see page from 72 to 79 Special tool holders are made on request 30 Tool holders ISO 25 Flange 38 Code W372 W374 W376 W378 Description Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Capacity Collet Type L L1 1 – 10 ER16 40 30.5 1 – 13 ER20 40 30.5 2 – 16 ER25 51.3 37.5 3 – 20 ER32 51.3 37.5 D 22 28 42 50 Capacity 1/10 1/13 1/16 1/20 Tool holders ISO 30 with toothed flange Collet chucks holders capacity 3/20 for Collets ER32 Code W404 W408 W414 W418 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER32 ER32 ER32 ER32 L 55 D 50 55 50 Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 for Collets ORT Code W422 W424 W426 W428 W432 W434 W436 W438 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A For “SCM” and “Morbidelli” Special tool holders are made on request D 63 72 60 72 63 72 60 INTEGRAL PULL STUD SPECIAL ANTI-JOINING TREATMENT For collets see page from 72 to 79 L 72 31 Tool holders ISO 30 with toothed flange with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/25 - ORT25 Code Description Collet Type L1 L D W4012 Collet chucks holders with emboded nut ER32 58 62 50 W4014 Collet chucks holders with emboded nut ER40 58 62 63 INTEGRAL PULL STUD SPECIAL ANTI-JOINING TREATMENT For “SCM” “Morbidelli” For collets see page from 72 to 79 Tool holders ISO 30 with toothed flange Mill holder arbor diameter 30 - 1” 1/4 Code W442 W444 W446 W448 W450 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 80 D 30 30 30 30 1” 1/4 INTEGRAL PULL STUD Mill holder arbor diameter 35 Code W452 W454 W456 W458 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 35 35 35 35 Mill holder arbor diameter 40 Code W462 W464 W466 W468 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 93 103 123 203 D 40 40 40 40 For “SCM”, “Morbidelli” Blocking type specifications are always needed Special tool holders are made on request RECESSED END CAP FLANGED END CAP 32 Tool holders ISO 30 with toothed flange Morse taper adapter Code W472 W474 W476 CM 1 2 3 L 60 90 90 INTEGRAL PULL STUD For “SCM”, “Morbidelli” Thread Mill holder Weldon DIN 1835 Code W482 W483 W484 W486 W488 W490 W491 W492 W493 W494 W495 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 100 For “SCM”, “Morbidelli” Special tool holders are made on request INTEGRAL PULL STUD 33 Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/20 for Collets ER32 Code W500 W501 W502 W503 W504 W505 W505B W505C W506 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut ER16 ER16 ER32 ER32 ER32 ER25 ER25 ER20 ER32 Collet Type ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery L1 36 36 36 36 36 36 36 36 36 L D 48,5 22 48,5 50 48,5 48,5 48,5 48,5 50 35 35 28 For “Biesse”, “HSD” Extra short type with flat on 1st Flange For collets see page from 72 to 79 Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 For Collets ORT 25A Code W522 W524 W526 W528 W532 W534 W536 W538 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A For “Biesse”, “HSD” Extra short type with flat on 1st Flange For collets see page from 72 to 79 Special tool holders are made on request L1 42 42 42 42 42 42 42 42 L 58,5 D 63 58,5 60 58,5 63 58,5 60 34 Tool holders ISO 30 with Flange DIN 69871 with embedded nut for left and right rotation Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code W5012 W5014 Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40 L1 56 56 L 60 60 D 50 63 For “Biesse”, “HSD” For collets see page from 72 to 79 Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/20 for Collets ER32 - TG Cod W507 W508 W514 W515 W516 W518 W519 W520 W507TG75 W507TG100 W507TG150 Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders with nut Collet chucks holders with nut ER32 ER32 ER32 ER32 Collet Type L1 L D ”Busellato” machinery 43 55,5 50 ”Busellato” machinery 43 ”Busellato” machinery 43 55,5 50 ”Busellato” machinery 43 54 70,5 50 ER32 ER32 54 ER32 54 70,5 50 ER32 54 TG75 70 TG100 70 TG150 70 For all machinery using Tool holders DIN 69871 without drugging cuts. For collets see page from 72 to 79 Special tool holders are made on request 35 Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 for Collets ORT 25A Code W522C W524C W526C W528C W532C W534C W536C W538C Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A L1 42 42 42 42 42 42 42 42 For all machinery using Tool holders DIN 69871 without drugging cuts. For collets see page from 72 to 79 Special tool holders are made on request L 58,5 D 63 58,5 60 58,5 63 58,5 60 36 Tool holders ISO 30 with Flange DIN 69871 Mill holder arbor diameter 30 - 1” 1/4 Code W539 W540 W541 W542 W544 W546 W548 W450 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 70 70 73 93 103 123 203 80 D 20 25 30 30 30 30 30 1” 1/4 Mill holder arbor diameter 35 Code W551 W552 W554 W556 W558 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor L 73 93 103 123 203 D 35 35 35 35 35 L 73 93 103 123 203 200 D 40 40 40 40 40 50 Mill holder arbor diameter 40 Code W561 W562 W564 W566 W568 W579 Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars For all machinery using Tool holders DIN 69871 without drugging cuts. RECESSED END CAP FLANGED END CAP Blocking type specifications are always needed Special tool holders are made on request 37 Tool holders ISO 30 Code W54125 W54230 D 25 30 L 70 93 SW 8x8 8x8 d 40 48 Tool holders ISO 30 with Flange DIN 69871 Morse taper adapter Code W572 W574 W576 CM 1 2 3 L 60 90 90 For all machinery using Tool holders DIN 69871 without drugging cuts. Thread Mill holders Weldon DIN 1835 Code W582 W583 W584 W586 W588 W590 W591 W592 W593 W594 W595 d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1” D 25 28 35 42 48 52 65 25 42 52 65 L 70 70 70 70 70 70 110 70 70 70 110 Special tool holders are made on request 38 Tool holders ISO 30 DIN 69871/A shrink fit chucks Code W5001 W5003 W5004 W5005 W5006 W5007 W5008 W5009 W5010 W5011 W5012 W5013 W5014 W5015 W5016 W5017 D 3 4 5 6 8 10 12 14 16 18 20 25 1/4“ 1/2“ 3/4“ 1“ L 80 80 80 80 80 80 80 80 80 80 80 100 80 80 80 100 Tool holders double compensation ISO 30 Tool holders tension and compression type Code d 43256T-ST 19 D 35 L 80 WEI size M3/M12 Special tool holders are made on request 39 Reduction from ISO/DIN 69871/A to HSK-R Code W101SK-R W102SK-R W103SK-R W104SK-R W105SK-R W106SK-R Description Collet type SK 40 HSK 25R SK 40 HSK 32R SK 40 HSK 40R SK 50 HSK 25R SK 50 HSK 32R SK 50 HSK 40R Tool holders ISO 30 “Thermwood” Collet chucks holders capacity 3/20 for Collets ER32 Code W507TH W508TH W514TH W515TH Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet Type ER32 ER32 ER32 ER32 For collets see page from 72 to 79 Special tool holders are made on request L1 45 45 45 45 L 57.5 D 50 57.5 50 40 Tool holders HSK63F “Thermwood” Collet chucks holders ER32 - ER40 ORT Code WF204TH WF222TH WF226TH Description Collet chucks holders Collet chucks holders Collet chucks holders Collet Type ER32 ER40 ORT25 L 72.5 76.5 76.5 D 50 63 60 For collets see page from 72 to 79 Tool holders Type BT20 Code W100bt20 Description Collet chucks Collet Type ER25 L 56 D 42 For collets see page from 72 to 79 Special tool holders are made on request Capacity 1/16
Similar documents
Tool holders Type HSK 63F DIN 69893
Collet chucks holders with nut
ER16
Collet chucks holders without nut
ER16
Collet chucks holders with Lh nut
ER16
Collet chucks holders without Lh nut
ER16
Collet chucks holders with nut
ER16
Colle...
