Nastec Pilot Pump Control Box

pilot
> we move it faster >
PUMP CONTROL & PROTECTION
Comprehensive
Pump & Motor
Protection
the most compact
and cost-effective
solution for the full
protection of a
pump
ENERGY SAVING, INNOVATIVE PUMP CONTROL
DPI Trading
www.dpitrading.co.za
www.incledon.co.za
pilot
> we move it faster >
PUMP CONTROL & PROTECTION
PILOT Blue Box is an electronic device for the control of
single phase and three phase motors (pumps) which
provides protection against:
Ÿ Over current, phase loss, excessive number of starts.
The backlit LCD displays the running current and PILOT
stops the pump if the maximum value set by the user is
exceeded.
Code
Model
Voltage [+/- 10%]
50/60 Hz
Maximum
current
Weight
[kg]
137991
137992
137993
137994
PILOT 112
PILOT 118
PILOT 312
PILOT 325
1 X 230 VAC
1 X 230 VAC
3 X 400 VAC
3 X 400 VAC
12 A
18 A
12 A
25 A
2
2
2,2
2,4
The maximum number of pump starts is also user
selectable and PILOT Blue Box will stop the pump
operation if this value is exceeded.
Dry running
* capacitor not included in the singlephase models (available upon request)
PILOT provides a display of the power factor value (P.F. or
cosø) and allows the user to set a minimum threshold value
for normal operations. PILOT Blue Box will stop the pump
below this value to protect against dry running.
Max. environment temperature: 40°C (104 °F)
Max. altitude: 2000 m
IP Protection: IP55 (NEMA 4)
PILOT Blue Box will make up to 5 automatic restart
attempts following an alarm condition at time intervals set
by the user.
180 mm
120 mm
PILOT Blue Box stores in memory the number of pump
starts and total running hours. The alarm history is also
stored to assist with servicing.
180 mm
The body is constructed entirely of aluminium, making
PILOT Blue Box extremely solid and easily cooled.
The IP55 protection makes it possible to install PILOT Blue
Box even in humid and dusty environments.
Also Available
2 x PG9
2 digital inputs, user selectable as normally open (N.O.) or
normally closed (N.C.), for connection of external control
switches. These contacts (volt free) allow the pump to be
stopped or started by float switches, pressure switches,
thermal protection, etc......
1 output relay contact to control an external alarm (250
VAC or 30 VDC, max 5A). This user configurable as N.O.
or N.C.
Contacts to connect a boost capacitor to assist the starting
of single phase pumps.
2 x PG21
PILOT, in combination
with a VASCO inverter, will start and
stop D.O.L. pumps
while providing them
with full protection.
DISCLAIMER
Whilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains
are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, “up to date”, or adequacy of, suitability, functionality,
ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information
herein thereafter provided.
INCLEDON
BLOEMFONTEIN Tel: 051 408 9200 BURGERSFORT
KLERKSDORP
Tel: 018 462 0009 LEPHALALE
Tel: 013 231 7224
Tel: 014 763 5824
GERMISTON
Tel: 011 323 0800 KATHU
Tel: 053 723 2213
NELSPRUIT
Tel: 013 752 3121 POLOKWANE
Tel: 015 292 8660
RUSTENBURG
DURBAN
Tel: 017 631 4200
UPINGTON
Tel: 054 332 1089 WELKOM
Tel: 057 396 1131
Tel: 043 736 6022
PORT ELIZABETH Tel: 041 409 8000
Tel: 014 591 7700 SECUNDA
Tel: 031 716 2200 EAST LONDON
DPI TRADING (Western Cape)
CAPE TOWN
Tel: 021 957 5600 GEORGE
Tel: 044 874 2327