Goulds 3171 / CV3171

Goulds Pumps
Goulds 3171 / CV3171
Vertical Sump and Process Pumps
Goulds 3171
Goulds Model 3171
Vertical Sump and Process Pumps
Designed for the Total Range of
Industry Services
N
N
N
N
Capacities to 3180 GPM (722 m3/h)
Heads to 344 feet (105 m)
Temperatures to 450° F (232° C)
Pit Depths to 20 feet (6 m)
Design Features
N
N
N
N
N
N
N
Self-Priming
Rugged Double Row Thrust Bearing
Heavy Duty One-piece Shaft
External Impeller Adjustment
Available in a Wide Range of Alloys
Open Impeller Design
Vapor Proof Option: Choice of packing,
or mechanical seal for containing sump vapors
Services
N
N
N
N
N
The “Veteran” vertical sump and process pump.
Thousands of installations—industrial process,
sump drainage, corrosive liquids, pollution control,
molten salts—attest to the 3171’s remarkable
performance. Simple mounting.
2
Industrial Process
Industrial Sump Wastes
Molten Sulfur
Tank Unloading
Corrosive and Non-Corrosive Liquids
Goulds 3171
Model 3171 Vertical Sump
and Process Pumps
Heavy Duty Design Features for a Wide Range of Services
LABYRINTH
BEARING SEAL
Prevents premature bearing failure
due to lubricant contamination.
C-FACE MOTOR MOUNTING
Accommodates readily available
C-face motors. Also available for
P-base and IEC motors.
CONTINUOUS HIGH PERFORMANCE
Original high efficiency maintained by
simple external adjustment resulting
in long-term energy savings.
DOUBLE ROW
THRUST BEARING
Grease lubricated—carries pump
thrust load; sealed for outdoor
installation.
DISCHARGE LOCKED
TO PUMP SUPPORT PLATE
FOR STRENGTH
OPTIONAL UPPER
STUFFING BOX
HEAVY COLUMN PIPE
Provides rigid support for pump
and bearings.
LINESHAFT STEADY BEARING
Self-lubricating carbon/graphite
bearing furnished as standard—
best for handling water,
corrosives, solvents and high
temperature liquids.
RESTRICTOR BUSHING
Close running bushing to prevent
pressure loss from casing.
ANY MOUNTING REQUIREMENTS
Met by support plate and optional
pit cover. Float switches, alternators
and other control devices can be
easily mounted.
STEADY BEARING HOUSING
Precision machined register fit
of column, bearing housing and
casing assures positive bearing and
shaft alignment. Completely
interchangeable with all lineshaft
bearing options.
HEAVY DUTY
ONE-PIECE SHAFT
With closely spaced steady bearings
assures long life and low
maintenance.
HEAVY DUTY CASING
Provides rigid support for shaft–closer
to impeller load–resulting in longer
steady bearing life.
FULLY OPEN IMPELLER
WITH BACK PUMP-OUT VANES
Acknowledged best design for
process services—solids handling,
stringy material, corrosives,
abrasives.
REMOVABLE SUCTION COVER
Replaceable wear part for low
operational costs.
3
Goulds 3171
Optional Features for Application Flexibility
Goulds offers a variety of options to meet users’ specific
plant and application requirements. Your Goulds
representative will be glad to recommend the features
best suited to your particular service conditions to
assure safe, efficient and reliable operation.
Molten Sulfur Pumps
Abrasive Liquids
• Jacketed column
and discharge
pipes (tested to
150 PSIG
[1034 kPa])
Goulds sealed bearing
arrangement is
recommended for
applications where
abrasive solids
are in the pumpage
and no clean
flush is
available.
A carbon
bearing and
lip seal is used
for sealing the bearing
housing. Spring loaded
grease cup is provided.
• Available in all
principal alloys
• One-piece,
self-lubricating,
graphite
impregnated
steady bearing
• Vapor-proof
construction to seal
sump vapors
JACKETED
COLUMN
JACKETED
DISCHARGE
PIPE
• Balanced, low NPSH, semi-open impeller
for optimum performance
SEALED BEARING
ARRANGEMENT
• Multiple intermediate bearings permit overall settings
to 20 feet (6 m)
Optional Bearings
Mounting Systems
Goulds offers the best choice of steady bearings to meet service
requirements...optional fluted rubber with rigid shell, bronze,
and (standard) carbon.
Goulds can provide optional mounting systems to meet
specific user requirements including pit covers fabricated
with float control mounting points, man holes for access,
vapor-proof designs, and lube line holes.
Float Controls
The widest range of float controls is offered to suit the individual requirements of every installation.
Ask your Goulds representative for a complete list of options.
Other
Options
• Complete line
• of controls and
• starters
• Enclosed
• lineshaft
• Other types of
• float controls
• ANSI tank
• mounting
• Flanged
• discharge
• connections
BALL-OPERATED
FLOAT SWITCH
4
DISPLACER TYPE
LIQUID LEVEL SWITCH
PIPE-MOUNTED,
DIRECT ACTING FLOAT SWITCH
Goulds 3171
3171 Hydraulic Coverage
CAPACITY— 2850 RPM (50 Hz)
m
125
TOTAL HEAD—3500 RPM (60 Hz)
100
10
500
20
GPM
30
40
15
20
30
50
50 60 70 80 90100
80
200
300
120 150
400 500 600
800
300
FT.
200
400
FT.
300
80
60
10
6
1x11/2 -8
200
40
40
100
1x11/2 -6
100
60
20
15
11/2 x3-6
60
40
1x1-5
15
30
80
80
20
60
21/2 x3-8
11/2 x2-8
30
m
80
10
40
Group ST
Group S
Group MT
10
20
5
20
5
0
TOTAL HEAD—2850 RPM (50 Hz)
m3 /h 3
10
0
10
20
GPM
3
m /h 3
30
40
6
50 60 70 80
10
15
100
200
20
30
300
50
400 500 600
80
800 1000
120 150
200
CAPACITY— 3500 RPM (60 Hz)
CAPACITY—1450 RPM (50 Hz)
10
60
6
GPM
20
10
30
15
40 50 60
20
30
50
80 100
200
80
120 150 200
300 400
300 400
600 8001000
600 800
2000
200
3000 4000
FT.
50
150
m
FT.
TOTAL HEAD—1750 RPM (60 Hz)
m
175
21/2 x3-13
50
Group ST
Group S
Group M
Group L
150
3x4-13
11/2 x3-13
40
4x6-13
125
100
6x8-13
30
40
125
30
100
21/2 x
3-11
11/2 x2-11
75
20
3x4-11
4x6-11H
75
8x10-11
20
50
1x11/2 -8
50
21/2 x3-8
10
25
25
1x11/2 -6
1x1-5
0
10
4x4-8
11/2X3-6
TOTAL HEAD—1450 RPM (50 Hz)
m3 /h 3
11/2 x2-8
0
10 GPM
m3 /h 3
20
30
6
40 50 60
10
15
80 100
20
200
30
50
300 400
80
600 800 1000
120 150 200
2000
300 400
3000
5000
600 800 1000
CAPACITY—1750 RPM (60 Hz)
5
Goulds 3171
3171 Hydraulic Coverage
CAPACITY— 950 RPM (50 Hz)
m3 /h 3
10
25
80
TOTAL HEAD—1150 RPM (60 Hz)
20
GPM
10
30
15
40 50 60
20
30
50
80 100
200
80
120 150 200
300 400
300 400
600 800 1000
2000
80
70
Group S
Group M
Group L
20
60
70
11/2 x 3-13
20
21/2 x 3 -13
60
15
3x4-13
50
4x6-13
50
3x4-11
40
21/2 x3 -11
4x6-11H
30
8x10-11
10
30
1x11/2 -8
21/2 x 3 -8
11/2 x2-8
20
20
4x4-8
5
5
10
10
0
15
40
6x8-13
11/2 x2-11
10
m
FT.
TOTAL HEAD—950 RPM (50 Hz)
m
100
FT.
90
30
6
0
10 GPM
m3 /h 3
20
30
6
40 50 60
10
15
80 100
20
200
30
50
300 400
80
600 800 1000
120 150 200
2000
300 400
3000
200
CAPACITY—1150 RPM (60 Hz)
Maximum Sealing Flexibility
Vapor-Proof Construction
Optional upper stuffing box allows use of wide range
of sealing arrangements to meet specific user requirements
for sealing toxic, hazardous, noxious or corrosive fumes.
With this option, the discharge pipe and all fittings are
sealed at the support plate.
6
Your Goulds representative will gladly recommend the best
sealing solution for your service, some of which are
illustrated here.
PACKED BOX
Standard vaporproof sealing
option. Includes
packing, lantern
ring and grease
lubricator (not
illustrated).
DOUBLE
CARTRIDGE SEAL
Available in wet
or dry versions to
control emissions.
DRY RUNNING
SEAL
Dry running,
non-contacting
cartridge gas seal.
Pressurized air
barrier between
seal faces
prevents vapor
leakage.
SINGLE OUTSIDE
SEAL
Mechanical seal
with oil lubricator
and sight glass.
Outside mount has
no metal parts in
contact with
vapors.
Goulds 3171
Dimensions Model 3171
All dimensions in inches and (mm). Not to be used for construction.
DIMENSIONS
ST
S
L
3x4-13
4x6-13 11/2x2-8 11/2x2-11 21/2x3-8
6x8-13
6x8-13
8x10-11
8x10-11
A
3.6
(92)
3.6
(92)
3.6
(92)
3.6
(92)
3.6
(92)
4
(102)
4
(102)
4
(102)
4.5
(114)
4.5
(114)
4.5
(114)
4.5
(114)
4.5
(114)
4.5
(114)
4
(102)
4
(102)
4.5
(114)
10.4
(264)
10.4
(264)
10.4
(264)
10.4
(264)
B
1.5
(38)
2
(51)
3
(76)
2
(51)
2
(51)
3
(76)
4
(102)
2
(51)
3
(76)
4
(102)
4
(102)
3
(76)
3
(76)
4
(102)
4
(102)
3
(76)
3
(76)
4
(102)
6
(152)
8
(203)
8
(203)
10
(254)
E
8.1
(205)
8.4
(213)
9.2
(232)
10.1
(256)
9.6
(244)
10.3
(262)
12.1
(306)
11.4
(289)
12.1
(306)
12.8
(325)
14.3
(362)
13.6
(346)
13.2
(335)
13.8
(351)
14.8
(375)
11.4
(289)
12.37
(314)
13.6
(346)
21.5
(546)
21.5
(546)
24.3
(616)
24.3
(616)
G
22
(559)
22
(559)
22
(559)
22
(559)
22
(559)
22
(559)
26.5
(673)
26.5
(673)
26.5
(673)
31
(787)
31
(787)
31
(787)
31
(787)
31
(787)
31
(787)
26.5
(673)
31
(787)
31
(787)
—
—
—
—
R
6
(152)
5.8
(148)
5.3
(132)
4.3
(108)
4.4
(111)
3.8
(97)
3.3
(84)
4.6
(116)
4.2
(106)
4
(102)
3.7
(94)
4.8
(121)
4.7
(119)
4.3
(109)
3.7
(94)
4.4
(111)
4.56
(116)
3.8
(97)
6.9
(174)
6.9
(174)
5.3
(133)
5.3
(133)
14.3
Q* (362)
15.3
(387)
16.8
(425)
17
(432)
17
(432)
18.5
(467)
22.5
(572)
20.5
(521)
22.5
(572)
24
(610)
26.5
(673)
25
(635)
25
(635)
25.5
(648)
27.5
(699)
20
(508)
22
(559)
22.8
(578)
38.5
(978)
39.5
(1003)
42.5
(1080)
43.5
(1105)
4x4-8
11/2x2-11 21/2x3-11 3x4-11 4x6-11H 11/2x3-13 21/2x3-13
MT
3.6
(92)
1x1-5
1x11/2-6 11/2x3-6 1x11/2-8 11/2x2-8 21/2x3-8
M
*Add 3 in. (76) for float mounted option.
7
Goulds 3171
Sectional View Model 3171
240
332A
221
134
136
107
105
106
242
189
Optional Upper Stuffing Box
122
195
192
213
123
190
155
199
197
Designed to Meet (or Exceed) Today’s
Tough Environmental Requirements
Installed in 1988 on hydrocarbon waste
sump service, this 3171 was easily
retrofitted with vapor-proof construction
including a ferrofluidic seal (see page 7)
to meet tougher EPA emission
requirements. Readings were less than
30 ppm—exceeding EPA requirements
8
100
178
198
182
101
315
351
187
Goulds 3171
3171 Parts List and Materials of Construction
Material
Item
Number
Cast
Iron
Part Name
100
Casing
101
Impeller
105
Upper Stuffing Box Lantern Ring
106
Upper Stuffing Box Packing
107
Upper Stuffing Box Gland
112
Ball Bearing
122
Pump Shaft
123
Deflector
Bronze
Fitted
Carbon
Steel
316SS
Alloy 20
Hastelloy
B&C
Steel
316SS
Alloy 20
Hastelloy
Bronze
Steel
316SS
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Cast Iron
Ductile Iron
Teflon
Acrylic Graphite
316SS
Double Row Angular Contact
Steel
316SS
EPDM
134
Bearing Shell
136
Bearing Locknut
Cast Iron
178
Impeller Key
155
Restrictor Bushing
182
Suction Cover
Cast Iron
187
Strainer
Cast Iron
316SS
189
Pump Support Plate
190
Lubrication or Flush Pipe
Steel
316SS
192
Head Column
Steel
316SS
195
Discharge Pipe
Steel
316SS
197
Steady Bearings
198
Impeller Screw
199
Impeller Washer
213
Steady Bearing Housing
221
Upper Stuffing Box (When Used)
240
Motor Support
242
Pipe Collar (Discharge Pipe)
Steel
316SS
Alloy 20
Hastelloy
306
Column Extension
Steel
316SS
Alloy 20
Hastelloy
316SS
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Steel
316SS
Carbon-Filled Teflon ®
Steel
316SS
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Alloy 20
Hastelloy
316SS
Alloy 20
Hastelloy
316SS
Alloy 20
Hastelloy
Alloy 20
Hastelloy
Steel
Carbon
Cast Iron
316SS
Cast Iron
Cast Iron
315
Discharge Elbow
332A
Labyrinth Seal
Cast Iron
351
Gasket—Suction Cover to Casing
369
Retaining Ring—Steady Bearing
Steel
Carbon-Filled Teflon ® with Viton O-ring
Nitrile Acrylic
Stainless
Construction Details All dimensions in inches and (mm).
ST
Pump
S
275
(125)
280
(127)
295
(134)
305
(139)
315
(143)
325
(148)
390
(177)
385
(175)
425
(193)
540
(245)
590
(268)
535
(243)
550
(250)
570
(259)
600
(273)
325
(148)
385
(175)
335
(152)
830
(377)
910
(414)
Weight—Add to Each 6”
of Length
Lb (kg)*
13
(6)
14
(6)
15
(7)
14
(6)
14
(6)
15
(7)
17
(8)
14
(6)
15
(7)
20
(9)
20
(9)
19
(9)
19
(9)
20
(9)
20
(9)
14
(6)
15
(7)
15
(7)
35
(16)
40
(18)
0.188
(5)
0.250
(6)
0.500
(13)
0.281
(7)
0.281
(7)
0.938
(24)
0.938
(24)
0.344
(9)
0.594
(15)
0.594
(15)
1.125
(29)
0.250
(6)
0.594
(15)
0.594
(15)
0.594
(15)
0.281
(7)
0.344
(9)
0.938
(24)
0.594
(15)
1.188
(30)
0.6875
1x11/2-8
11/2x2-8
21/2x3-8
4x4-8
(17)
Shaft
3x4-11 4x6-11H
11/2x3-13 21/2x3-13
Tapered
1.1118
(28)
Large End
3x4-13 4x6-13
Tapered
1.585
(40)
Large End
11/2x2-8
11/2x2-11 21/2x3-8
6x8-13 8x10-11
Tapered
2.222
(56)
Large End
Diameter at Coupling End
0.875
(22)
1.375
(35)
1.875
(48)
Diameter at Steady Bearing
1.125
(29)
1.625
(41)
2.25
(57)
Ball Bearing
Steady Bearing
(Sleeve Type)
Maximum Total Working
Pressure—Casing
General
11/2x2-11 21/2x3-11
L
1x1-5
Diameter at Impeller
11/2x3-6
MT
Weight (2 Foot Depth)
Less Motor
Lb (kg)*
Maximum Diameter
of Solids
Bearings
M
1x11/2-6
5305 or Equal
5308 or Equal
5311 or Equal
1.125 I.D. x 1.625 O.D.
(29x41)
1.625 I.D. x 2.125 O.D.
(41x54)
2.25 I.D. x 3.0 O.D.
(57x75)
150 PSI
(1034 kPa)
Max. Liquid Temp.—
Without Upper Stuffing Box
210° F
(99° C)
Max. Liquid Temperature—
Upper Stuffing Box
450° F
(232° C)
*L Group Pump Weights are based on a 3 ft (.9m) Setting
9
Goulds CV 3171
Goulds Model CV 3171
Vertical Sump and Process Pumps
Designed for the Total Range of
Industry Services
N
N
N
N
Capacities to 1300 GPM (295 m3/h)
Heads to 230 feet (126 m)
Temperatures to 450° F (232° C)
Pit Depths to 20 feet (6 m)
Design Features
N
N
N
N
N
N
N
N
Self-Priming
Rugged Double Row Thrust Bearing
Heavy Duty One-piece Shaft
External Impeller Adjustment
Available in a Wide Range of Alloys
Recessed Impeller Design
Sealless Design
Optional Vapor Proof Construction
Services
N
N
N
N
N
N
N
The CV 3171 is a recessed impeller, circular volute
type sump pump. Ideal for large solids and shear
sensitive fluids. It will pass any solid that will pass
through the discharge pipe. Circular volute minimizes
radial loads making this the ideal pump for low flow
process applications.
10
Fiberous Wastewater
Industrial Process
Industrial Sump Wastes
Tank Unloading
Corrosive and Non-Corrosive Liquids
Food Processing
Chemical Slurries
Goulds CV 3171
Model CV 3171 Vertical Sump
and Process Pumps
Heavy Duty Design Features for a Wide Range of Services
LABYRINTH
BEARING SEAL
Prevents premature bearing failure
due to lubricant contamination.
C-FACE MOTOR MOUNTING
Accommodates readily available
C-face motors. Also available for
P-base and IEC motors.
CONTINUOUS HIGH PERFORMANCE
Original high efficiency maintained by
simple external adjustment resulting
in long-term energy savings.
DOUBLE ROW
THRUST BEARING
Grease lubricated—carries pump
thrust load; sealed for outdoor
installation.
DISCHARGE LOCKED
TO PUMP SUPPORT PLATE
FOR STRENGTH
OPTIONAL UPPER
STUFFING BOX
HEAVY COLUMN PIPE
Provides rigid support for pump
and bearings.
LINESHAFT STEADY BEARING
Grease lubricating sealed bearings
furnished as standard—best for
handling fluids with solids.
RESTRICTOR BUSHING
Close running bushing to prevent
pressure loss from casing.
RECESSED IMPELLER
Since impeller is recessed in the
casing, velocities are low and solids
contact with the casing are reduced.
Wear rate, solids degradation, and
shearing of liquids are minimized.
OPTIONAL STRAINER
Recommended for services where
solids larger than the discharge of
the pump can potentially enter
the casing.
ANY MOUNTING REQUIREMENTS
Met by support plate and optional
pit cover. Float switches, alternators
and other control devices can be
easily mounted.
STEADY BEARING HOUSING
Precision machined register fit
of column, bearing housing and
casing assures positive bearing and
shaft alignment. Completely
interchangeable with all lineshaft
bearing options.
HEAVY DUTY
ONE-PIECE SHAFT
With closely spaced steady bearings
assures long life and low
maintenance.
NON-CLOG CIRCULAR CASING
Large open passageways prevent
clogging when handling bulky,
fibrous, or stringy liquids. Circular
Volute reduces radial loads during low
flow operation, extending steady
bearing life.
11
Goulds CV 3171
CV 3171 Parts List and Materials of Construction
Material
Item
Number
Cast
Iron
Part Name
CD4
GA-20
100
Casing
D.I.
CD4
GA-20
101
Impeller
CD4
CD4
GA-20
105
Lantern Ring
106
Packing
Teflon
Teflon
Teflon
Acrylic Yarn
Acrylic Yarn
Acrylic Yarn
316SS or as Specified
316SS or as Specified
316SS or as Specified
D.I.
CD4
GA-20
Steel
107
Gland
108A
Adapter, Casing
112
Bearing, Ball
Steel
Steel
122
Shaft
Steel
316SS
C-20
123
Deflector
EPDM
EPDM
EPDM
134
Shell, Bearing
C.I.
C.I.
C.I.
136
Locknut, Bearing
Steel
Steel
Steel
155
Bushing (casing)
Carbon Teflon
Carbon Teflon
Carbon Teflon
187
Strainer (OPTIONAL)
Steel
316SS
C-20
189
Plate, Support
Steel or as Specified
Steel or as Specified
Steel or as Specified
190
Tubing, Lube Line
Steel
316SS
C-20
192
Column, Head
Steel
316SS
C-20
195
Pipe, Discharge
Steel
316SS
C-20
197
Steady Bearing
Carbon/Bronze/Rubber/Viton
Carbon/Bronze/Rubber/Viton
Carbon/Bronze/Rubber/Viton
213
Steady Bearing Housing
221
Upper Stuffing Box
240
Support, Motor
C.I.
C.I.
C.I.
242
Nut, Pipe
Steel
316SS
C-20
306
Extension, Column
Steel
316SS
C-20
315
Elbow, Discharge
D.I.
CD4
GA-20
332A
Seal, Labyrinth
Teflon /Viton
Teflon /Viton
Teflon /Viton
333
Seal, Housing
Steel/Nitrile
Steel/Nitrile
Steel/Nitrile
333H
Seal, Lip
Nitrile
Viton
Viton
351
Gasket, Casing
Nitrile/Acrylic
Nitrile/Acrylic
Nitrile/Acrylic
351A
Gasket, Elbow
Nitrile Acrylic
Nitrile/Acrylic
Nitrile/Acrylic
361A
Ring, Retaining Ball Bearing
Steel
Steel
Steel
369
Ring, Retaining Steady Bearing
316SS
316SS
C-20
369A
Ring, Retaining Shaft
Steel
Steel
Steel
C.I.
316SS
GA-20
Cast Iron or as Specified
Cast Iron or as Specified
Cast Iron or as Specified
382
Washer Lock Nut
Steel
Steel
Steel
412A
O-Ring, Impeller
Teflon
Teflon
Teflon
Construction Details All dimensions in inches and (mm).
Pump
Shaft
2x2-8
2x2-10
3x3-10
2x3-13
3x4-13
Weight (3 Foot Depth)
Less Motor
Lb (kg)*
484
(220)
531
(241)
559
(254)
565
(257)
616
(280)
Weight—Add fo Each 6”
of Length
Lb (kg)
20
(9)
20
(9)
20
(9)
20
(9)
20
(9)
Maximum Diameter
of Solids
1.75
(45)
1.75
(45)
2.75
(70)
1.75
(45)
2.75
(70)
Diameter at Impeller
0.6309
(16)
0.9008
(23)
0.9008
(23)
0.9008
(23)
0.9008
(23)
Diameter at Coupling End
1.375
(35)
Diameter at Steady Bearing
of Solids
1.625
(41)
Ball Bearing
Bearings
Steady Bearing
(Sleeve Type)
Maximum Total Working
Pressure—Casing
General
12
5308
or Equal
1.625 I.D. x 2.125 O.D. (41 I.D. x 54 O.D.)
4.00 LG. (102 LG.)
285 PSIG
(1965 kPa)
Max. Liquid Temp.—
Without Upper Stuffing Box
180° F
(82° C)
Max. Liquid Temp.—
With Upper Stuffing Box
450° F
(232° C)
Goulds CV 3171
Sectional View Model CV 3171
240
332A
221
134
107
112
242
105
106
333
Upper Stuffing Box
136
189
369A
192
122
123
195
213
369
333H
306
190
197
155
108A
351
412A
101
100
315
187
351A
13
Goulds CV 3171
CV 3171 Hydraulic Coverage
CAPACITY—50 Hz
m
90
FT. 0
300
85
280
80
260
75
TOTAL HEAD—60 Hz
70
65
55
180
50
160
120
30
100
25
80
15
10
80
300
140
35
20
200
100
400
130
140
500
600
2x2-10
5
20
0
0
3x3-10
2x2-8
40
0
0
GPM
m3 /h
100
200
20
300
40
60
400
80
500
100
600
700
120 140 160
200
300
180
800 1000
400
1800
FT.
200
190
180
3500/2900 RPM
170
1750/1450 RPM
160
150
140
130
120
110
100
90
80
3x4-13
70
60
50
40
30
20
10
0
800 900 1000 1400 1800 2000
2x3-13
60
160
700
2x2-8
220
200
40
100
GPM
60
240
60
45
40
20
200
220
1200
300
400
m
60
55
50
45
40
35
30
25
20
TOTAL HEAD—50 Hz
0 m3 /h
15
10
5
0
800
CAPACITY—60 Hz
0 m3 /h
0
30
m
GPM
CAPACITY—50 Hz
20
60
40
100
200
80
300
100
400
120
500
140
160
600
180
700
800
100
FT.
90
70
FT.
m
20
60
1180/960 RPM
80
50
70
20
2x3-13
60
40
3x4-13
15
50
30
40
10
15
10
2x2-10
30
20
3x3-10
2x2-8
5
20
5
10
10
0
0
0
0
GPM 100
m3 /h 20
200
40
300
60
400
80
500
100
600
120
CAPACITY—60 Hz
14
140
700
160
800
180
0
900
200
220
0
TOTAL HEAD—50 Hz
TOTAL HEAD—60 Hz
25
Goulds CV 3171
Dimensions Model CV 3171
All dimensions in inches and (mm). Not to be used for construction.
B
A
E
G
D
Q
DIMENSIONS
A
2x2-8
2x2-10
4.00 (102)
4.50 (114)
3x3-10
4.50
(114)
2x3-13
3x4-13
4.50 (114)
4.50 (114)
B
2.00 (51)
2.00 (51)
3.00
(51)
2.00 (51)
3.00 (76)
D
1.32 (34)
1.45 (37)
1.69
(43)
1.27 (32)
1.14 (29)
G
26.50 (673)
31.00 (787)
31.00
(787)
31.00 (787)
31.00 (787)
E
10.79 (274)
13.01 (330)
13.17
(335)
15.44 (392)
15.22 (387)
*
18.11 (460)
21.47 (545)
22.97
(583)
25.24 (641)
26.32 (669)
Q
*Add 3 in. (76) for float mounted option.
15
Goulds LF
3198
3196
PRO Services
Extending
Equipment Life...
®
Product Repair (all types and brands of rotating equipment)
• Service Center Repair
• Field Service
• Parts Supply
Reliability Improvement
• Inventory Management
• Replacement/Exchange
• Turnkey Repair/Installation
• Training
Optimization of Assets
• Predictive Analysis/Condition Monitoring
• Root Cause Failure Analysis
• Pump & System Assessments
• Upgrades – Mechanical & Hydraulic
• Maintenance Management/Contract Maintenance
• Technical Expertise
• Fast Turnaround
• Factory Trained Service • Emergency Service –
Personnel
24 hours/day, 7 days/week
• Quality
ProSmart® provides continuous machinery
monitoring to identify little problems before
they become big problems…like downtime.
Using wireless technology, advanced signal
processing capabilities, and easy-to-deploy
sensors, ProSmart offers an affordable means to
monitor all of your rotating equipment anywhere
in the world. By identifying and alerting you to changes in operating
conditions, ProSmart increases your time to respond to either correcting
the upset condition, or properly plan its repair.
Key Features include:
• Continuous data acquisition and analysis – ProSmart collects vibration,
temperature, and available process conditions every five seconds;
saving you time from routine data collection.
• Automatic Notification and Accessibility – By alerting when a machine
goes into distress, you are able to focus your resources on recovery
activities. The ProNet web-hosted solution allows access to
information anywhere in the world through a standard Internet
browser connection.
• Advanced diagnostic tools – More than simple overall data, ProSmart
provides advanced analysis capabilities such as time-waveform,
spectral, and spectral windowing.
• Easy to deploy – Using plug and play sensors, wireless connectivity,
and an industrially hardened enclosure, ProSmart can be easily
deployed throughout your plant, including hazardous areas.
• ISO and Safety Certified
PUMPSMART
PumpSmart ® is the latest advancement in pump control and protection to reduce
energy consumption, increase uptime and decrease maintenance cost. It allows the
pump to be right-sized to the application by dialing in the speed and torque which
increases flow economy, reduces heat and vibration, and improves overall system reliability.
• Simplified Pump Control — PumpSmart was designed specifically to optimize
pumping applications and can be used to control a single pump or coordinate
between multiple pumps without the need for an external controller.
• Pump Protection — PumpSmart guarantees to protect the pump from upset
conditions with patented sensorless pump protection algorithms.
• Smart Flow — PumpSmart features a sensorless flow function for centrifugal
pumps that can calculate the flow of the pump within ± 5% of the pump rated flow.
• Drive for the DCS — While most VFDs can only provide basic information,
PumpSmart offers unparalleled insight to the pump operation which allows for
smoother process control and efficiency.
• Pump Experts — PumpSmart is a variable speed drive with pump-specific
algorithms imbedded into the drive. With over 150 years of pump knowledge,
let the pump experts take responsibility of your pump system.
Visit our Web site at www.gouldspumps.com
Form B3171/CV3171 10/08
© 2008 Goulds Pumps, Incorporated
A subsidiary of ITT Corporation, Inc.