Jumbotrac Brochure

Man
Fram
e Te
nts
y Te
nts,
One
Sen
se o
f Pu
rpos
e
Traditional Frame Tent
Simplicity at its Best
If you’re looking for a traditional design frame tent, with
Benefits
modern day amenities, look no further. The Traditional
• Simple assembly
Frame Tent is constructed with a structural aluminum frame
• No center poles
and durable vinyl tent top covering. The fabric sections are
• Expandable design
available in expandable and one piece designs allowing you
• Standard wall snap line allows for easy
versatility when you need it. The frame system is comprised
of poles and fittings of which most are interchangeable
installation of side walls
• Interchangeable parts between sizes
between various sizes.
Traditional Frame Tent
Specifications
• Widths: 10’, 12’, 15’, 20’, 30’, and 40’
• Fabric: 15oz Laminated PVC
- Blackout UW, translucent white & colors
- Fabric certified flame retardant
• Frame: 1” SCH40 structural aluminum
- 2” OD structural aluminum tube
- All aluminum anodized
- Powder coated steel fittings
• Expandable mids available in 5’, 10’, 15’, 20’ and 30’
• Expandable sections with lace or clasp connection
• Standard pitch 2:1
• Double reinforced buckle attachment
• Standard wall snap line attachment
S TA N D A R D
E X PA N D A B L E
Qwik-top ®
The Tensioned Specialist
The Qwiktop ® Frame Tent utilizes tensioned valance
Benefits
technology to create a tighter fitting tent top. By using
• Simple design
the tensioned valance you can eliminate than traditional
• Highly tensioned appearance
“buckles” used to attach the top to the frame thus greatly
• Reduction of installation time
reducing installation time and offer a better performing
• Expandable and non-expandable versions available
covering in foul weather. With a frame identical to the
• S t a n d a r d w a ll s n a p li n e a ll o w s f o r i n s t a ll a t i o n o f
Standard Expandable design a user can always opt to
side walls
upgrade an existing frame to a Qwik-top® by simply replacing
the top and adding Qwik™ Baseplates. The Qwik-top ® system
is available in 1 piece non-expandable versions as well as
• Optional “Double Valance” to simplif y connec tion to
other tents
• Interchangeable parts between sizes
expandable versions with a lace or metal clasp connection.
QwikTopTM
Specifications
• Widths: 10’, 15’, 20’, 30’, and 40’
• Fabric: 15oz Laminated PVC
- Blackout UW, translucent white & colors
• Fabric certified flame retardant
• Frame: 1” SCH40 structural aluminum
- 2” OD structural aluminum tube
- All aluminum anodized
- Powder coated steel fittings
• Expandable mids available for each width
• Ratchet/Rope tensioners included with each top
• E x p a n d a b l e s e c t io n s w i t h l a c e c o nn e c t io n o r m e t a l
clasp connection
• Standard wall snap line attachment
Q W I K T O P
Festival®
High Peak for High Success
The Festival® Frame Tent epitomizes structural strength with
Benefits
simplicity of design. The high swooping peaks and tensioned
• Fewer frame parts than other frame tents
fabric appearance make the Festival ® a favorite for most any
• Faster installations
outdoor event. The key design principle behind the Festival ®
• Cross-cable design
system is the cross-cable mast support system which allows
• Expandable and non-expandable versions available
for far less parts than other frame tents and reduces time
• S t a n d a r d w a ll s n a p li n e a ll o w s f o r i n s t a ll a t i o n o f
of installation. Our proprietary valance tensioning system
and mid-span tensioning system keep the fabric uniformly
tensioned and free of wrinkles without added complexity.
side walls
• Optional “Double Valance” to simplif y connec tion to
other tents
• Interchangeable parts between sizes
Festival®
Specifications
• System engineered for 70mph wind
• Widths: 10’, 15’, 20’, 30’, and 40’
• Mos t Popular Sizes: 10x10, 10x 20, 15x15, 20x 20, 20x 30,
20x40
• Fabric: 15oz Laminated PVC
- Blackout UW, translucent white & colors
• Fabric certified flame retardant
• Frame: 2” OD structural aluminum tube (10’x and 15’x)
- Jumbo 2”x4” structural aluminum tube (20’x +)
- All aluminum anodized
• Powder coated steel fittings
• Expandable mids available for each width
• Ratchet/Rope tensioners included with each top
• Expandable sections with lace connection
• Standard wall snap line attachment
F E S T I VA L
JumboTrac®
The “Slide-In” Engineered Frame Tent
The Jumbotrac ® Frame Tent is an engineered tent system
Benefits
that provides exceptional performance in both short term and
• Slide-in design
seasonal applications. The design features a fabric system
that slides through a channel in the extruded aluminum frame,
allowing for easier installations and significant reduction in
wear to the fabric due to repetitive installations. Both the
roof and wall fabric slide into channels within the aluminum
frame system. Hip, Gable, and Hex end configurations are
available to customize the system for the perfect fit to any
site. Our proprietary valance tensioning system and mid-span
tensioning system keep the fabric uniformly tensioned and
• Install fabric on the ground or in the air
• No pins required, push button frame connections
• S t a n d a r d w a ll s n a p li n e a ll o w s f o r i n s t a ll a t i o n o f
standard side walls
• Track s t yle eave pipe allows for sliding zippered walls
that are user friendly
• Optional “Double Valance” to simplif y connec tion to
other tents
free of wrinkles without added complexity.
• Interchangeable parts between sizes
Jumbotrac®
Specifications
• System engineered for 85mph wind
• Widths: 20’, 30’, 40’, and 50’
• Fabric: 15oz Laminated PVC
- Blackout UW, translucent white & colors
• Fabric certified flame retardant
• Frame: Jumbotrac ® JT 1-2” x 5” aluminum extrusion
- Jumbotrac ® JT 3-2” x 6” aluminum extrusion
- All aluminum anodized
• Powder coated steel fittings
• Expandable mids available for each width
• Ratchet tensioners included with each top
• Jumbotrac ® walls are split for access and feed into leg
channel and eave channel
• S t a n d a r d w a ll s n a p li n e a t t a c h m e n t a v a il a b l e f o r u s e o f
standard walls
J U M B O T R A C
Indiana Tent Tops
Adding Flexibility
The Indiana tent top is one of Aztec’s new Compatible Plus
Benefits
product lines designed to offer existing tent users flexibility
• Added flexibility
and choices when replacing their tent tops. The Indiana
• Durable design
Tent Top is designed to be compatible with the Fiesta®
• Expandable and non-expandable designs
brand of frame tents offered by Evansville, Indiana based
• S t a n d a r d w a ll s n a p li n e a ll o w s f o r e a s y i n s t a ll a t i o n o f
Anchor Industries. Whether you need to replace an entire
side walls
top or simply one mid section to your current inventory you
are guaranteed to have more options and choices with the
Indiana and the Compatible Plus lineup. Tops are available in
gable designs with Velcro connections and hip designs with
lace connection.
Indiana Tent Tops
Specifications
• Widths: Gables: 6’, 9’, and 10’
• Hip Ended: 10’ 16’, 20’, and 30’
• Fabric: 15oz Laminated PVC
- Blackout UW, translucent white & colors
- Fabric certified flame retardant
• Gables feature universal Velcro attachment
• Expandable hip design features lace attachment
• Expandable mids available in 5’, 10’, 15’, and 20’
• Standard pitch 2:1
• Double reinforced buckle attachment
• Standard wall snap line attachment
I N D I A N A
If YOU c
an ima
gine it…
WE can
b ui l d i
t
For over 40 years, Aztec Tents has been established as a leading manufacturer of tents, clearspan
structures, and other customized fabric membrane shelters. Whether your needs are for
state of the art customized clearspan fabric structures or simply tents for special
events, Aztec Tents can provide you with the service, experience, and
expertise to help you with your decision.
Aztec Tents
2665 Columbia Street
Torrance, CA 90503
www.aztectents.com
Toll Free (800) 228-3687
Fax (310) 381-0722