docIon Exchange Resin Cartridges
download 
Report Transcription
Ion Exchange Resin Cartridges
Ion Exchange Resin Cartridges polysciences.com/resincartridge ® High-Quality Resin Cartridges for Every Application Purolite Product Bulletin Purolite has been at the forefront in ion exchange resin technology and manufactures several hundred varieties of resins. As a result, we have carefully selected the best performing product or combination of products that allow us to optimize cartridge performance. The end result is that Purolite provides a family of products that are engineered to meet the strictest quality requirements of today’s most demanding applications. Ion Exchange Resin Cartridges Our expertise in ion exchange resin technology, coupled with the high quality of cartridge components and precision manufacturing techniques, allow us to provide you with the highest quality, best performing ion exchange resin cartridges. We offer cartridges in many configurations such as Barnstead, Millipore, and US Filter to fit most popular ultra-pure water systems. Cartridge Types • Purolite Pretreatment Cartridges Feature activated carbon in combination with a macroporous anion resin. These cartridges remove colloids and organics. They are typically used to protect and increase cartridge life in ultra-pure water systems. • Purolite Ultra-Pure Mixed Bed Cartridges Contain a combination of anion and cation resins that are designed with minimal sensing. These cartridges are designed to produce 18.3 megaohm water with minimal rinsing in most situations. • Purolite High Capacity Cartridges Purolite ion exchange resin cartridges offer some significant performance advantages when compared to other types that are seen in the marketplace. Contain both cation and anion resins in a two bed configuration. These cartridges will produce a larger amount of pure water than mixed bed cartridges, but at a lower resistivity level. • Purolite Cation Cartridges Cartridge Overview For many years, the Purolite name has stood for high quality ion exchange resin products. Purolite continues that tradition with its resin cartridge product line that uses the same kind of exacting standards used in the production of our resins. Purolite Ion exchange resin cartridges produce the highest water quality, lowest TOC, longest life, and fastest rinse-down to 18.3 megaohms available in the market. ® Purolite Ion Exchange Resin Cartridges are made from virgin polypropylene and using the latest heat welding techniques without using any chemical bonding agents. Assembly is performed under clean manufacturing conditions using proven statistical Process Control to ensure product quality. Model and lot numbers are heat stamped into each cartridge to provide traceability without the concern of possible contamination from ink or labels. These high capacity cartridges are generally used for water demineralization. They can be combined with anion cartridges to act as a 2-Bed system. • Purolite Organic Free Cartridges Typically used as the last cartridge in an ultra-pure water system. They can produce water with less than 10 ppb of TOC. These cartridges contain semiconductor grade resin and our high performing Macronet™ organic adsorbent resin. • Purolite Oxygen Removal Cartridges These cartridges are very effective in preventing corrosion in applications such as cooling water. They are purged with nitrogen and vacuum packed when manufactured to ensure they are supplied at maximum capacity. 2 Purolite Product Bulletin Ion Exchange Resin Cartridges Key Performance Features Cartridges Are Made with Virgin Polypropylene Manufactured with New Production Ion Exchange Resins All plastic pieces are constructed with new polymers to ensure there are no impurities or leachable contaminants. By using the best quality components to manufacture our cartridges, Purolite is assured that the final product is unsurpassed in performance and longevity. Purolite is a leading supplier of ion exchange resins and uses this capability to manufacture cartridges with fresh resin that provides long lasting performance. We do not use any regenerated or recycled resin that can reduce cartridge life or reduce the high performance standards for demanding applications. Heat Welded Construction This eliminates the need for chemical based adhesives that can possibly contaminate ultra pure water supplies. This welding technique also provides outstanding strength for improved durability. Pressure Tested to Ensure Total Reliability All Purolite cartridges are rated to operate at a maximum operating pressure of 60 psi, but are routinely tested at significantly higher pressures to ensure that our cartridges will exceed these performance requirements and provide an added margin of safety. Packaged Using an Aluminum/Plastic Double Sealed Process Our aluminum and bonded plastic bags are vacuumsealed to provide the ultimate vapor and oxygen barrier. This ensures a long shelf life and reduces the effects of oxidation over time. It is a significant improvement over the common plastic wrapping used on many other cartridges in the market. 3 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® PCS-Style Cartridges Length: 17.2 in (43.7 cm) Diameter: 3.4 in (8.6 cm) Shipping Weight: 5 lbs. Product Type Application Capacity in Grains (CaCO3) Barnstead Equivalent Application Comments PCL-1010 High Capacity 2 Bed High Purity H2O 1835 Grains DO803 NANO/E/B/Pure™ Systems, Cooling loops Produce a larger amount of H2O but with lower resisistivity PCL-1011 Mixed Bed Ultra Pure H2O 1135 Grains DO809 NANO/B/Pure™ Systems, Cooling loops Will produce 18.3 megaohm H2O with low TOC and fast rinse-down PCL-1012 Oxygen Removal Oxygen Removal 15,000 l of 1ppm O2 DO811 B-pure™ Systems cooling loops Reduces corrosion in applications such as cooling H2 O PCL-1013 Activated Carbon Organic Removal 5000 L. feed H2 O DO813 B-pure™ Systems cooling loops Typically used as a first cartridge in a E-Pure or Nano Pure system PCL-1014 Cation removal Water demineralization 3321 Grains DO815 B-pure™ Systems cooling loops PCL-1015 Mixed Bed + Adsorbant Ultra Pure H2O 936 Grains DO820 NANO Pure™ Systems Can be used to produce 18.3 megaohm water plus low TOC values PCL-1016 2 Bed Mixed Bed + Adsorbant Organic removal 796 Grains DO832 B-Pure™ Systems Pretreatment Pretreatment cartridge removes ionized & organic impurities PCL-1017 Pretreatment 2 Bed Colloid Removal 896 Grains DO835 NANO/E/B/Pure™ Systems Removes Colloids and organics PCL-1018 Pretreatment 2 Bed Organic Removal 468 Grains DO836 NANO/E/Pure™ Systems,Organic removal Contain both macroporous scavenging resin + activated carbon PCL-1019 2 Bed – Mixed Bed Mixed Bed + O2 removal 565 Grains D8809 B-pure™ Systems cooling loops Combine demineralization + O2 removal to minimize corrosion PCL-1020 3 Bed Mixed Bed + O2 & Organic removal 406 Grains D8811 B-pure™ Systems cooling loops High purity semiconductor grade resins + activated carbon PCL-1021 Anion Removal Anion Removal 2326 Grains DO760 B-pure™ Systems cooling loops Removes weakly ionized impurities and will raise pH PCL-1022 Mixed Bed + Adsorbant Organic Free 1135 Grains D5021 NANO/E/Pure™ Systems Final polish for ultra pure water systems PCL-1023 High Temperature mixed bed Ultra Pure H2O N.A. None B-pure™ Systems cooling loops Used for high temperature/ high purity applications PCL-1024 High Temperature Oxygen Removal N.A. None Maximum Differential Pressure: 60 psi Used for high temperature/ high purity applications Recommended Storage Temperature: 0ºC – 35ºC 4 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® Hose Barb-Style Cartridges Length: 18.7 in (47.5 cm) Diameter: 3.4 in (8.6 cm) Shipping Weight: 5 lbs. Product Type Application Capacity Barnstead Equivalent Connection Type Comments PCL-1110D High Capacity 2 Bed – Dyed Resin High Purity H2O 1835 Grains DO8901 Hose Nipple Cartridge Produce a larger amount of H2O but with lower resisistivity PCL-1111 Mixed Bed Ultra Pure H2O 1135 Grains DO8911 Hose Nipple Cartridge Will produce 18.3 megaohm H2O with low TOC and fast rinse-down PCL-1111D Mixed Bed, Dyed Resin Ultra Pure H2O 1135 Grains D8902 Hose Nipple Cartridge Contain semi-conductor grade resin for the highest purity and lowest TOC PCL-1112 Anion Resin Oxygen removal 1710 ppm D8903 Hose Nipple Cartridge Reduces corrosion in applications such as cooling loops PCL-1113 Organic Removal Ultra Pure H2O 5000 L of feed H2O D8904 Hose Nipple Cartridge Typically used as the first cartridge in a E-Pure or Nano Pure systems PCL-1114D Cation – Dyed Resin Water Demineralization 4000 Grains D8905 Hose Nipple Cartridge Provide high capacity & long life. Can be used with anion cartridge for a 2 Bed System PCL-1116D 3 Bed Pretreatment High Purity H2O 1040 Grains D8921 Hose Nipple Cartridge High purity mixed bed plus activated carbon PCL-1117D 2 Bed Mixed Bed – Dyed resin Pretreatment – ionic & organic contaminant removal 860 Grains D8922 Hose Nipple Cartridge Pretreatment cartridge for mixed bed systems PCL-1310D 2/3 Size Mixed Bed High capacity – dyed 1136 Grains D8950 Hose Nipple Cartridge High capacity long life for laboratory water systems PCL-1317D Mixed Bed Mixed bed + organic removal. Dyed 580 grains D8951 Hose Nipple Cartridge Mixed bed resin that removes ionized & organic impurities Maximum Differential Pressure: 60 psi Recommended Storage Temperature: 0ºC – 35ºC Purolite® Final Filtration Cartridges Inlet: 0.25” NPT Product Type PCL - 1450 0.2 micron PCL - 1450 0.2 micron Outlet: Variable Hose Barb Capacity Barnstead Equivalent Connection Type Comments Final filter N.A. D3750 NPT/Hose Barb Naturally hydrophilic hollow fiber. Extremely low leachables and effective for bacterial removal. Irradiated for sterility. Remote dispenser cross flow final filter N.A. D3751 Top & bottom nipples Naturally hydrophilic hollow fiber. Extremely low leachables and effective for bacterial removal. Irradiated for sterility. Application Maximum Flow Rate: 2 liters/min Maximum Inlet Pressure: 50 psi 5 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® SlimLine Flat Gasket on Top, Double Open-ended Style Cartridges Length: 9.8125 in (24.9 cm) Product PCL-2010 PCL-2011 PCL-2013 PCL-2015 Type Diameter: 2.923 in (7.42 cm) Application Separate Bed Ultra Pure H2O Mixed Bed 927 Grains Ultra Pure H2O Carbon Block Cartdrige Mixed Bed + Organic Removal Ametek Equivalent Capacity 488 Grains Organic removal Organic scavenger PCF1-10MB N.A. 370 Grains Shipping Weight: 5 lbs. Continental Equivalent Comments DISB 1000-4 Produce high quality H2O with high contaminant removal. Usually used before a mixed bed cartridge to reduce contaminant load. DIMN 1000-4 Semi-conductor grade resin for the highest quality water and long life. DICR 1000-4 Offers the efficiency of activated carbon plus a fibrous matrix for maximum organic removal. DIOR 1000-4 Combines semiconductor mixed bed resin plus a high capacity organic scavenger Purolite® SlimLine Flat Gasket on Top, Double Open-ended Style Cartridges Length: 20 in (50.8 cm) Diameter: 2.923 in (7.42 cm) Shipping Weight: 5 lbs. DISB 2000-2 Produce high quality H2O with high contaminant removal. Usually used before a mixed bed cartridge to reduce contaminant load. DIMN 2000-2 Semi-conductor grade resin for the highest quality water and long life. N.A. DICR 2000-2 Offers the efficiency of activated carbon plus a fibrous matrix for maximum organic removal. 739 Grains DIOR 2000-2 Combines semi-conductor mixed bed resin plus a high capacity organic scavenger PCL-2110 Separate Bed Ultra Pure H2O 1311 Grains PCL-2111 Mixed Bed 2.923 in. diameter Ultra Pure H2O 896 Grains PCL-2113 Carbon Block Cartdrige *2.7 in. diameter Organic removal PCL-2115 Mixed Bed + Organic Removal Organic scavenger Maximum Differential Pressure: 60 psi PCF120MB Recommended Storage Temperature: 0ºC – 35ºC 6 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® Double Open-end, Flat Gasket Sealed, “Big Blue”-Style Cartridges Length: 9.8 in (24.9 cm) Diameter: 4.5 in (11.43 cm) Ametek Equivalent Continental Equivalent Shipping Weight: 5 lbs. Product Type Application Capacity PCL-2211 Mixed Bed Ultra Pure H2O 1340 Grains Produce high quality H2O with high contaminant removal. Based on Purolite semi-conductor grade resins. PCL -2215 Mixed Bed + Organic Removal Organic Scavenger 1109 Grains Produce high resistivity H2O with low TOC content. Usually used after a mixed bed cartridge to polish water. Maximum Differential Pressure: 60 PSI Comments Recommended Storage Temperature: 0ºC – 35ºC Purolite® Double Open-end, Flat Gasket Sealed, “Big Blue”-Style Cartridges Length: 20 in (50.8 cm) Diameter: 4.5 in (11.43 cm) Product Type Application Capacity Ametek Equivalent PCL-2311 Mixed Bed Ultra Pure H2O 2680 Grains BBF1-20MB PCL-2313 Carbon Block Organic Removal N.A. Offers the efficiency of activated carbon plus a fibrous matrix for maximum organic removal. PCL-2315 Mixed Bed + Organic Removal Organic removal 2215 Grains Produce high resistivity H2O with low TOC content. Usually used after a mixed bed cartridge to polish water. PCL-2311 Mixed Bed Ultra Pure H2O 2680 Grains PCL-2315 Mixed Bed + Organic Removal Organic Scavenger 2215 Grains Maximum Differential Pressure: 60 PSI BBF1-20MB Continental Equivalent Shipping Weight: 5 lbs. Comments Semi-conductor mixed bed resin for “Big Blue” style housings. Semi-conductor mixed bed resin for “Big Blue” style housings. Recommended Storage Temperature: 0ºC – 35ºC 7 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® Double Open-end Cartridge with Double 222 O-Rings Length: 17.2 in (43.7 cm) Diameter: 3.4 in (8.6 cm) Shipping Weight: 5 lbs. Product Type Application Capacity Millipore™ Equivalent Application Comments PCL-5011 Mixed Bed Ultra Pure H2O 565 Grains CPMB 01202 Milli-Q, Milli-Q+ Length = 12.7 in (32.1 cm), Diameter = 2.94 in (7.5 cm). Shipping weight = 2.5 lb. PCL-5013 Carbon Block Organic Removal N.A. CDFC 01204 Milli-Q Length = 12.7 in (32.1 cm), Diameter = 2.94 in (7.5 cm). Shipping weight = 0.7 lb. PCL-5016 2 Bed Mixed Bed Organic removal 395 Grains CDEX 01201 Milli-Q Length = 12.7 in (32.1 cm), Diameter = 2.94 in (7.5 cm). Shipping weight = 2.5 lb. Maximum Differential Pressure: 60 PSI Recommended Storage Temperature: 0ºC – 35ºC Purolite® Double Open-end Cartridge with Single 222 O-Rings Length: 17.2 in (43.7 cm) Diameter: 3.4 in (8.6 cm) Shipping Weight: 5 lbs. Product Type Application Capacity Millipore™ Equivalent Application Comments PCL-5111 Mixed Bed Ultra Pure H2O 2680 Grains CPMB 02202 Super-Q 4 bowl systems, Length = 22.8 in (57.9 cm), Diameter = 4.5 in (11.43cm) Shipping weight = 8.5 lb PCL-5113 Activated Carbon Organic Removal N.A. CDFC 02203 Super-Q 4 bowl systems, Length = 22.4 in (56.9 cm), Diameter = 2.7 in (6.9cm), Shipping weight = 1.3 lb PCL-5116 Mixed Bed Organic scavenger 2400 Grains CDEX 02201 Super-Q 4 bowl systems, Length = 22.8 in (57.9cm), Diameter = 4.5 in (11.43cm), Shipping weight = 8.5 lb Maximum Differential Pressure: 60 PSI Recommended Storage Temperature: 0ºC – 35ºC 8 Purolite Product Bulletin Ion Exchange Resin Cartridges Purolite® Millipore®-Style Cartridges Replacement for QPAK® Systems Millipore™ Equivalent Application Comments N.A. CPMQ 004R1 QPAK® 2 – no final filter Contains high quality semi-conductor mixed bed resin + clean activated carbon. Used for water that has been per-treated by distillation, RO, or ultrafiltration N.A. CPMQ K05R1 QPAK® 2 – w/final filter Contains high quality semi-conductor mixed bed resin + clean activated carbon. Used for water that has been pre-treated by distillation, RO, or ultrafiltration. 620 Grains CPMQ 004D2 QPAK® 2 – no final filter Contains high quality semi-conductor mixed bed resin + clean activated carbon. Used for water that has been pre-treated with ion exchange resins. Low organics 1135 Grains CPMQ K05D2 QPAK® 2 – w/final filter Contains high quality semi-conductor mixed bed resin + clean activated carbon. Used for water that has been per-treated with ion exchange resins PCL-5454 Activated Carbon + Antiscaling compound Purification pack N.A. CPRO PO402 ROPAK® – no final filter Used for compact Millipore systems. Does not have to be reversed to fully utilize. PCL-5455 Mixed Bed Ion exchange resin 18 megaohm-cm resistivity 2490 Grains CP4A LLR ES AFSPAK® – no final filter Designed to meet NCCLS Type 1 Specification Product Type Application PCL-5450 Ion exchange + activated carbon 18 megaohm-cm resistivity PCL-5451 Ion exchange + activated carbon 18 megaohm-cm resistivity PCL-5452 Ion exchange + activated carbon Low organics PCL-5453 Ion exchange + activated carbon Maximum Differential Pressure: 60 PSI Capacity Recommended Storage Temperature: 0ºC – 35ºC 9 Purolite Product Bulletin Ion Exchange Resin Cartridges 10 Purolite Product Bulletin Ion Exchange Resin Cartridges 11 Purolite Product Bulletin Ion Exchange Resin Cartridges 12 Purolite Product Bulletin Ion Exchange Resin Cartridges 13 Corporate Headquarters European Office Asia Pacific Office Polysciences, Inc. 400 Valley Road Warrington, PA 18976 Polysciences Europe GmbH Handelsstrasse 3 D-69214 Eppelheim Germany Polysciences Asia Pacific, Inc. 2F-1, 207 DunHua North Road Taipei, Taiwan 10595 (800) 523-2575 / (215) 343-6484 (800) 343-3291 / (215) 343-0214 fax [email protected] (49) 6221-765767 (49) 6221-764620 fax [email protected] (886) 2 8712 0600 (886) 2 8712 2677 fax [email protected] polysciences.com © Copyright Polysciences, Inc. 2012. All rights reserved. No artwork or photographic images within this or other related publications may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without permission from Polysciences, Inc.
