John Guest marine catalog

John Guest USA Inc.
10 Bloomfield A ve., P.O. Box 625,
Pine Brook, New Jersey 07058 0625, U.S.A.
Toll Free: 1-800-94 JG USA
Toll Free Fax: 1-877-77 JG FAX
Tel: 1-973 808 5600 Fax: 1-973 808 5036
www.johnguest.com
[email protected]
Marine Plumbing Catalog
THE SPEEDFIT PUSH-IN SOLUTION
FOR MARINE PLUMBING SYSTEMS
61
The company has a policy of continuous research
and development and reserves the right to amend
without notice the specification and design of all products
illustrated in this catalog. John Guest reserve the right
to change the color and shape of products.
Photographs are for illustration purposes only.
AVAILABLE FROM:
Subject to our Terms and Conditions of Sale listed on
page 10.
JANUARY 2005
and
are registered
trademarks of John Guest International Limited
© Copyright 2005.
Z2105/204/01/05
FOCUS ON RESEARCH AND DEVELOPMENT
As the world’s l argest manufacturer of push-in pipe fittings,
John Guest has been pioneering revolutionary plastics
manufacturing technologies since the early 1970s.
As befits a company committed to innovation, more than
10% of the John Guest workforce is directly in research
and product development.
Over the past 30 years, the company has established a
worldwide reputation for product quality and service. With
its precision engineering background and highly trained
specialist workforce, John Guest is uniquely placed to
manufacture to the most stringent international standards
- and its long-standing commitment to product innovation
and development has resulted in a comprehensive range
of award winning fittings with substantial benefits for
specifier, installer and end user alike.
In addition to on-site resources which include the latest
CAD/CAM technologies, extensive development work on a
variety of projects is carried out in close conjunction with
United Kingdom and internationally renowned universities.
With production currently running at more than 130 million
units a year, the success of the JG Speedfit system proves
the value of these benefits in practice. In addition to
plumbing applications, John Guest fittings are specified as
original equipment by many leading building products
manufacturers and used extensively by market leaders in
the automotive, compressed air and brewing industries.
Quality components depend on quality machines and
highly skilled operators. John Guest has all three in
abundance. A policy of continuous re-investment in
leading edge technologies has equipped the company
with an advanced large-scale manufacturing capability
which incorporates highly sophisticated process controls.
Right from the start, the company’s philosophy has been
to employ the most able people and to give them the best
possible training. There are 1000 staff at the manufacturing
centers in the United Kingdom near Heathrow
Airport and
at Maidenhead in Berkshire. Another 200 people are
based on John Guest companies in USA, Korea, Germany,
France, Spain, Italy, New Zealand, and Australia.
EXCELLENCE IN MANUFACTURING
With millions invested in new
plant and equipment over recent
years, John Guest’s manufacturing
center is one of the largest and
best equipped of its kind in the
world. High capacity injection
molding machines and assembly
equipment are supported by an
in-house toolroom staffed by a
highly trained team of qualified
toolmakers.
ASSURED QUALITY
THE PUSH-IN SOLUTION FOR
MARINE PLUMBING SYSTEMS
MARINE PLUMBING SYSTEMS
INNOVATION FROM A WORLD LEADER
WITH JOHN GUEST PLUMBING
PRODUCTS YOU CAN EXPECT:
John Guest plumbing push-in fittings and pipe
have been designed for the plumbing of hot and
cold water service. Whether your application is for
fresh water, raw water , gray water, or potable water;
John Guest push-in fittings and pipe meet the high
demands of the Marine Market.
●
Reductions in time
and labor costs
●
No tools required
●
Efficient, quick connections
(even in tight working spaces)
John Guest quality systems have been
approved by the BSI to EN ISO 9001.
●
Quick disconnections; can be
used many times
The Speedfit System is approved by the
Water Regulations Advisory Scheme.
●
Speedfit Fittings have NSF Standard 61
certification for Drinking Water System
Components and materials which contact
drinking water.
Suitable for Speedfit PEX pipe,
copper pipe and other good quality
plastic pipes.
●
No clamps or compression nuts
to loosen due to vibration
●
No sweating required
●
Lightweight and easy to handle
●
Use with hot or cold water
●
Superior flow characteristics
●
Lead free and non toxic
STANDARDS AND AFFILIATIONS
61
The Genuine JG symbol represents our
commitment to our customers, and what
the John Guest name means to business:
Quality, Reliability, and Support.
John Guest plumbing products should be installed
to conform with good plumbing practice.
The products in this catalog should not be used for
gas, fuel oil, compressed air applications, or
residential plumbing.
Every aspect of the company’s operation is characterized by
the pursuit of total quality. Zero defect
process controls are
built into all design and manufacturing assembly processes
to achieve optimum standards of long term product reliability.
ø´3/4
ø´3/4
1
22 mm
ø´3/4
John Guest has been a BS EN
ISO 9001 Registered Company
since 1989 and has received
awards and approvals for quality
manufacture from many leading
international companies and
approvals organizations.
22 mm
22 mm
2
NEW TWIST AND LOCK FITTINGS
STANDARD SPEEDFIT FITTINGS
'O' ring
MAKING A GOOD CONNECTION
Collet
Gap between Cap
and Flange
Fittings and pipe should be kept clean, bagged,
and undamaged before use.
NEW TWIST AND LOCK FITTINGS
'O' ring
Collet
Copper pipe
The fitting should be in the ‘unlocked’ position, this is
shown by a small gap between the screwcap and the
body flange.
Pipe Stop
Copper pipe
Stainless S teel Teeth
Speedfit pipe with
Superseal Pipe Insert
Stainless steel teeth
Push pipe up to stop
Main ‘O’ Ring
Speedfit Pipe with
Superseal Pipe Insert
Copper pipe
Stainless St eel Teeth
Collet
Speedfit Pipe with
Superseal Pipe Insert
Secondary Seal
Pipe mark indicates
full insertion
Push the pipe into the fitting, up to the pipe stop. If the
Speedfit Pipe has been cut correctly the insertion mark on
the pipe will be level with the collet head. The ‘O’
ring on the
Superseal Pipe Insert provides a secondary seal against the
bore of the fitting. A good connection has been made.
Secondary Seal
Pipe mark indicates
full insertion.
Push the pipe into the fitting, up to the pipe stop. If the
Speedfit Pipe has been cut correctly the insertion mark on
the pipe will be level with the collet head. The ‘O’ r
ing on the
Superseal Pipe Insert provides a secondary seal against the
bore of the fitting.
Standard Speedfit Fittings have a collet with stainless
steel teeth to grip the pipe and an ‘O’ ring to provide a
permanent leakproof seal.
The additional benefit of Twist and Lock Fittings is that
a twist of a screwcap locks the pipe in position and
gives greater compression on the ‘O’ ring for even
greater security.
Pull to check it is secure. It is good practice to test the system
prior to leaving the site or before use. Our recommended test
procedure is shown in our Technical Checklist.
Pipe cutter
JG-TS
ADDED BENEFIT OF TWIST AND LOCK
Speedfit Barrier Pipe
Push pipe up to stop
Secondary Seal
Don’t use damaged or scored pipe.
Fitting may be gripped but not sealed if pipe is not fully inserted.
Pull to check connection is secure. It is good practice to
test the system prior to leaving the site or before use.
Our recommended test procedure is shown in our
Technical Checklist.
TO DISCONNECT
✗
Pipe mark not level with collet head - indicating pipe not pushed fully home.
Don’t forget to push the pipe fully into the fitting, past both
the collet (gripper) and the ‘O’ ring.
Do not insert fingers into the fitting as the stainless
steel teeth may cause injury.
Remember to pressure test the completed installation
according to the recommendations in our Technical Checklist.
Ensure the pipe is free of score marks. Cut the pipe
square. When using Speedfit Barrier Pipe cut along an
insertion mark. We recommend the use of JG Pipe Cutters.
To prevent damage to the ‘O’ ring remove all burrs and
sharp edges. When connecting Speedfit Pipe use a
Superseal Pipe Insert. The insert should only be used
with Speedfit Pipe.
✗
✗
If you are not using collet clips, ensure that the screwcaps
are in the locked position.
PREPARE THE PIPE
✗
Don’t use hacksaws to cut the pipe or leave burrs on the
end of the pipe.
STANDARD FITTINGS
'O' ring
WHAT NOT TO DO
Twist the screwcap until it touches the body flange.
This
locks the pipe into position and increases the ‘O’ ring seal
around the pipe for greater security.
Ensure that the system is depressurized.
An ‘O’ ring on the head of the insert and the shape of the
stem, provide a secondary seal against the bore of the
fitting. A combination of this and the main ‘O’ ring ensure
a good connection.
The stem of the insert gives greater rigidity of the length
of pipe within the fitting, reducing the chance of leaks if a
side load is applied.
The screwcap on T wist and Lock fitting will need to turned
back to the unlocked position.
Push the collet square against the face of the fitting by using
fingers or with the help of our collet release tool.
With the collet held in position the pipe can be removed.
The fitting can be reused without the need for
replacement parts.
The head of the insert has been designed for ease of insertion.
3
4
Reducer
Straight Tap Connector
PART
NO.
PLUMBING FITTINGS
Union Elbow
John Guest Speedfit reserve the right to
change the color and shape of products.
Photographs are for illustration purposes only.
PART
NO.
PIPE OD
MM
MM
PART
NO.
PIPE OD
THREAD
MM
BSP
PART
NO.
PIPE OD
MM
PEM061510W
15
x
10
PEMSTC1514
15
x
1/2”
PL10
10
PEM062215W
22
x
15
PEMSTC1516
15
x
3/4”
PL15
15
PEM062815W
28
x
15
PEMSTC2216
22
x
3/4”
PL22
22
PEM062822W
28
x
22
PL28
28
FLEXI HOSES
Flexi Hose
With brass swivel nut and sealing washer.
For torque figures see Technical Checklist.
MM
300mm long
NEW TWIST AND LOCK FITTINGS
'O' ring
PIPE OD
STEM OD
Plug
Collet
PEM0310W
10
PEM0315W
15
PEM0322W
22
PEM0328W
28
61
61
Stainl ess Steel Teeth
500mm long
61
Speedfit Pipe with
Superseal Pipe Insert
Plug-in Elbow
Bent Tap Connector
Female Connector
THREAD
MM
BSP
FLX15
15
x
1/2"
FLX16
15
x
3/4"
FLX22
22
x
3/4"
FLX18
15
x
1/2”
FLX20
15
x
3/4”
FLX19
22
x
3/4”
PART
NO.
PIPE
OD
PIPE
OD
FLX23
22
x
3/4”
NC471
5/8” x 15mm
Full Bore
Hot and Cold water only, 150°F maximum
Connects imperial to metric pipe
STANDARD FITTINGS
'O' ring
Copper pipe
PIPE OD
61
Conversion Union Connector
Copper pipe
PART
NO.
Stainless Steel Teeth
PIPE OD
PART
NO.
Collet
Speedfit Pipe with
Superseal Pipe Insert
PART
NO.
STEM OD
MM
MM
PEM221010W
PEM221515W
10
15
10
15
PEM222222W
22
22
THREAD
MM
BSP
PKM3201W
15
1/2”
PKM3202W
22
3/4”
PART
NO.
PEMBTC1514
PIPE OD
THREAD
MM
BSP
15
x
61
1/2”
Flexi Hose
With brass swivel nut and sealing washer.
For torque figures see Technical Checklist.
Note: Plastic threads are not as strong as metal
threads. For torque figures see Technical Checklist.
Please note a Collet Cover cannot be
used on a Speedfit end assembled
with the stem of a 22mm Stem Elbow.
Standard Speedfit Fittings have a collet with stainless
steel teeth to grip the pipe and an ‘O’ ring to provide a
permanent leakproof seal.
The additional benefit of Twist and Lock Fittings is that
a twist of a screwcap locks the pipe in position and
gives greater compression on the ‘O’ ring for even
greater security.
PIPE OD
Conversion Union Connector
Requires hand
tightening only.
300mm long
61
61
PART
NO.
61
Provides a swivel
type connection
PIPE
OD
NC462
Connects imperial to metric pipe
PIPE
OD
500mm long
1/2” OD x 15mm
PART
NO.
PIPE OD
PIPE OD
FLX17
15
x
15
FLX26
22
x
22
FLX21
15
x
15
FLX27
22
x
22
MM
MM
Hot and Cold water only, 150°F maximum
61
Union Connector
Union Tee
PART
NO.
4 Way Manifold
Tank Connector
PIPE OD
PART
NO.
MM
PART
NO.
PIPE OD
MM
PIPE OD
MM
PART
NO.
SFM512210S
PEM0410W
10
PEM0210W
10
CM0715S
15
PEM0415W
15
PEM0215W
15
CM0722S
22
PEM0422W
22
PEM0222W
22
CM0728S
28
PEM0428W
28
PEM0228W
PIPE OD
22
x
Flexi Hose with Service Valve
Slip Connector
MM
10
PART
NO.
PIPE OD
MM
CM-SC-15S
28
300mm long
15
Suitable for cold water tanks only
Hot and Cold water only, 150°F maximum
Requires hand
tightening only.
61
61
Used to connect pipes where there is no
lateral movement. Pipe passes through
this fitting to allow connection where lateral
movement is restricted.
61
500mm long
PART
NO.
PIPE OD
THREAD
MM
BSP
FLX24
15
x
1/2”
FLX25
22
x
3/4”
FLX31
15
x
1/2”
FLX32
22
x
3/4”
Hot and Cold water only, 150°F maximum
61
PART
NO.
End Stop
Reducing Tee
Reducing Union Connector
PIPE OD
PART
NO.
MM
PIPE OD
MM
PEM201510W 15 x 10
PEM3015AW
PEM202215W 22 x 15
PEM302210AW 22 x 22 x 10
Sizes listed as follows.
1
2
61
3
15 x 15 x 10
PEM3022AW
22 x 22 x 15
PEM3015BW
15 x 10 x 10
PEM3022BW
22 x 15 x 15
PEM3022CW
15 x 15 x 22
PEM3022DW
22 x 15 x 22
PEM3028AW
28 x 28 x 22
PEM3028BW
28 x 22 x 22
PEM3028DW
28 x 22 x 28
Barb Connector
4 Port Rail Manifold
PART
NO.
PIPE OD
MM
PSE4610W
10
PSE4615W
15
PSE4622W
22
PART
NO.
PART
NO.
PIPE OD
MM
PIPE OD
HOSE ID
MM
INCH
SFM522210S
22
x
10
NC448-3/8
15mm x 3/8”
SFM522215S
22
x
15
NC448
15mm x 1/2”
NC473
22mm x 3/4”
NC737
22mm x 1/2”
Hot and cold water only, 150°F maximum
61
61
61
5
6
PIPE AND PIPE ACCESSORIES
Speedfit Barrier Pipe
Double Check Valve
PART
NO.
BRASS FITTINGS
PIPE OD
15DCV
Brass Rail Manifold
Brass Male Connector
PART
NO.
MM
15
Coils
Hot and Cold water only, 150°F maximum
PART
NO.
PIPE OD
THREAD
MW011504N
15mm x 1/2” BSPT
JGRAIL4
MW012206N
22mm x 3/4” BSPT
MW012808N
28mm x 1” BSPT
10MC (1/2)
10mm x 1/2” BSP
15MC (1/2)
15mm x 1/2” BSP
22MC (3/4)
22mm x 3/4” BSP
MW012818N
28mm x 1” BSP
PART
NO.
MM
PIPE OD
Pipe Clips and Spacers
Collet Cover
PIPE OD
METER
PART
NO.
MM
MM
15
15
PC22W
22
PM1915B
15
PC28W
28
25
AM1922W
22
x
25
AM1915W
10BPEX-50C
10
x
50
PM1915R
10BPEX-100C
10
x
100
15BPEX-25C
15
x
15
x
50
PM1922R
22
15
x
100
PM1922B
22
22 x 15
22BPEX-25C
22
x
25
22 x 15
22BPEX-50C
22
x
50
28BPEX-10x3L 28
x
3
JGRAIL6
6 ZONE
JGRAIL12
12 ZONE
61
Plastic Service Valve
VALVES
Straight lengths 3m long
PART
NO.
PIPE OD
15ISV
15
PCSW
Available in white, red or blue
Nail Clip
For use with standard
Speedfit fittings only.
PART
NO.
MM
61
Hot and Cold water only, 150°F maximum
Stop Valve
LLDPE Tube
PART
NO.
Brass Male Stem Adapter
PART
NO.
PIPE OD
THREAD
PIPE OD
MM
15STV
15
22STV
22
Hot and Cold water only, 150°F maximum
Converts Speedfit to male thread
15 x 1/2” BSPT
MW052206N
22 x 3/4” BSPT
MW052818N
28 x
MM052226N
22 x 3/4” NPT
Brass Service Valve
1” BSP
MM052228N
22 x
1” NPT
MM052828N
28 x
1” NPT
PIPE OD METER
PART
NO.
61
PIPE OD
10 x 100
Natural
PE-1007-100M-B
10 x 100
Blue
PE-1007-100M-E
10 x 100
Black
PE-1007-100M-R
10 x 100
Red
PE-15115-0100M-B
15 x 100
Blue
PE-15115-0100M-R
15 x 100
Red
Gray
15
PE-15115-0100M-G 15 x 100
Converts Speedfit to female thread
15BSC
PIPE OD
THREAD
MM
BSP
15
PART
NO.
PIPE OD
x
1/2"
10HSV
10
MW502216N
22
x
3/4"
15HSV
15
22HSV
22
22CMA
THREAD
MM
BSP
22
x
1”
To be used when connecting
Speedfit Pipe to a compression fitting.
Also for connecting LLDPE Tube
to Speedfit Fittings
PART
NO.
PIPE OD
15 APT
15
THREAD
MM
BSP
x
15
CM1822S Gray
22
PART
NO.
JG-TS
For up to 22mm size pipe
PART
NO.
Hot and Cold water only, 150°F maximum
JG HDC
BLADE JGHDC
PIPE OD
EPDM ‘O’ Ring
PART
NO.
PIPE OD
PART
NO.
PIPE OD
MM
TSM10N
10
10RA
10
10 EPR
10
TSM15N
15
15RA
15
15 EPR
15
TSM22N
22
22RA
22
22 EPR
22
TSM28N
28
28 EPR
28
MM
MM
Allows a firmer grip on the
collet when removing pipe.
Display Stand
3/4"
PART
NO.
28
Heavy Duty Pipe Cutter
Brass Chrome Plated Service
Valve with Tap Connector
For maximum torque figures on plastic
thread, please see T echnical Checklist.
Suitable for central heating systems.
10
CM1815S Gray
Release Aid
PART
NO.
Washing Machine Tap
PIPE OD
22
NPC28
Pipe Cutter
CM1810R, CM1815R, CM1822R
CM1810B, CM1815B, CM1822B
Pipe Insert
MM
15
Brass Male Cylinder Adapter
15
NPC22
For up to 28mm size pipe
MW501514N
PART
NO.
CM1810S Gray
Brass Chrome Plated
Service V alve
MM
NPC15
Also available in red or blue to provide
color coding of pipe.
Green
61
PIPE OD
10
MM
Red and blue collet clips should not
be used to prevent accidental release
PART
NO.
PART
NO.
SIZE
To prevent accidental release of
standard Speedfit fittings.
Brass Stop Valve
Brass Female Stem Adapter
PART
NO.
MM
15HSV-BRASS
MM
NPC10
MM
PE-1007-100M-N
MM
MW051504N
PIPE OD
Collet / Identification Clip
PART
NO.
61
MM
15
10
15BPEX-100C
22 x 15
PIPE OD
PC15W
10BPEX-25C
15BPEX-50C
MM
4 ZONE
PART
NO.
PIPE OD
PIPE OD THREAD
MM
61
BSP
15PTSV
15
x
1/2”
22PTSV
22
x
3/4”
PART
NO.
JG-STAND-3W
SIZE
6’ x 3’
White metal, products not included.
61
Brass Female Cylinder Adapter
PART
NO.
PIPE OD
22CFA
22
THREAD
MM
BSP
x
Suitable for central heating systems.
1”
Cold Forming Bend
Superseal Pipe Insert
Emergency Shut Off Tap
PART
NO.
15 ESOT
Brass Drain Cock
PIPE OD
MM
15
Hot and Cold water only, 150°F maximum
PART
NO.
15BDC
PART
NO.
PIPE OD
STS10
10
STS15
15
STS22
22
STS28
28
PART
NO.
MM
PIPE OD
MM
PIPE OD
MM
15
Speedfit Drain Cocks cannot be used
where collet covers are fitted. They
can be used with a standard fitting
fitted with a collet clip.
To be used with Speedfit Pipe
and Speedfit fittings, to give
enhanced sealing.
10mm
10CFB
10
15CFB
15
22CFB
22
15mm and 22mm
61
61
7
To help create a tighter bend than
the minimum unsupported pipe.
8
JOHN GUEST USA, INC. TERMS & CONDITIONS OF SALE
TECHNICAL CHECKLIST - MARINE PLUMBING
•
Fittings and pipe should be kept clean and undamaged before use.
Do not use for gas, fuel oil or compressed air applications.
•
Sizes. 10mm to 28mm outside diameter.
•
Pipes. Super Speedfit fittings can be used with:
Speedfit PEX Pipe, Copper pipe
and other good quality plastic pipe
Super Speedfit fittings cannot be used on stainless steel pipe.
•
•
•
•
87psi at 150°F
Cold water
175psi at 68°F
Burst Pressure (fittings). With copper or p
lastic pipe at 68°F.
Super Speedfit fittings used with copper or Speedfit (PEX) barrier pipe will
withstand pressures well in excess of normal service conditions.
High temperatures. Can withstand 237°F intermittently for short periods.
The Super Speedfit system should not be used on an uncontrolled
heat source.
Minimum bend radii (BPEX)
Pipe Diameter
10mm
15mm
22mm
Min radius with clips
4”
7”
9”
Min radius with cold forming bend 1
•
1/4”
10-15mm
22mm
28mm
3”
4
1/2”
Clip Spacing
Horizontal Run
12”
20”
32”
Vertical Run
20”
32”
40”
•
Expansion (PEX pipe). 1% on length between 68°F and 180°F.
•
Flow rates. Comparable with metal systems.
•
Paint and Chemicals. Use only water or oil based paint. Collet covers
prevent paint ingress into fittings. DO
NOT ALLOW CONTACT WITH
cellulose based paints, paint thinners or strippers, solder flux or acid based
descalents or aggressive cleaning products.
•
Exposure to sunlight. Super Speedfit products, when used indoors, are not
affected by sunlight. When used outdoors protect from ultraviolet light by
lagging or painting.
Pipe clips. Pipe clips should not be fitted any closer than 2-1/2” from the
end of the fitting. Pipe should be adequately supported by pipe clips to
prevent undue stress (side load) on fittings.
•
Pipe inserts. Must be used on all installations when using plastic pipe and
should be fully inserted.
•
Connection to copper pipe. 18” is the minimum distance to make a solder
connection on copper pipe inserted into a
Super Speedfit Fitting. Ensure that
any residual flux and solder does not come into contact with the fitting.
•
Valves and taps. Plastic 15mm and 22mm valves and taps available from
John Guest are not suitable for central heating installations.
•
Collet Covers. Collet covers provide added security against pipe
disconnection, e.g. the fittings coming into contact with rigid surfaces and
behind dry-lining walls. Collet Covers are available in white, or in red or blue
to allow for color coding of pipes.
•
Collet Clips. Gray Collet Clips are used with standard fittings to prevent
accidental pipe disconnection. Red and blue clips provide color coding of pipe.
Red and blue clips should not be used to prevent accidental release of pipe.
•
Residential Plumbing: John Guest fittings are not for use with residential plumbing.
9
System flushing. As is usual practice for any plumbing installation, flushing
of the system prior to the use of Super Speedfit is recommended to remove
any contaminants/chemical residue from elsewhere in the system.
•
Maximum Torque Figures (BSP & BSPT & NPT). The maximum torque
figures for BSP, BSPT, and NPT threads used on Super Speedfit plumbing
products in mating threads conforming to relevant BS or International
thread standards.
Threads
Size
Plastic
1/2’”
Maximum Torque
3.0 Nm
3/4”
4.0 Nm
Brass
1/2”
4.0 Nm
3/4”
5.0 Nm
Terms and Conditions
The products described in this document are hereby offered
for sale to be established by John Guest
(USA) Inc., its subsidiaries and its authorized distributors. This of fer and its acceptance by any customer
(the “Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item
described in this document, when communicated to John Guest (USA) Inc., its subsidiaries or an
authorized distributor (the “Seller”) verbally or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions of Sale. All descriptions, quotations, proposals,
offers, acknowledgments,
acceptances and sales of the Seller’s pro ducts are subject to and shall be governed exclusively by the
terms and conditions stated herein (the “ Agreement”). The Buyer ’s acceptance of any offer to sell is
limited to the terms and conditions in the Agreement. Any terms or conditions in addition to, or inconsistent
with those stated in the Agreement, proposed by the Buyer in any acceptance of an offer by the Seller, are
hereby objected to. No such additional, different or inconsistent terms and
conditions shall become part of
the agreement between the Buyer and the Seller unless expressly accepted in writing by the Seller.
The Seller’s acceptance of any of fer to purchase by the Buyer is expressly conditioned upon the Buyer’s
assent to all the terms and conditions in this Agreement, irrespective of any terms in addition to, or in
consistent with those contained in the Buyer’s offer. Accepta
nce of the Selle r’s products shall in all events
constitute such assent.
2. Documents. Unless provided otherwise in the Agreement, all catalog
descriptions, illustrations,drawings
and literature or independently submitted estimates of performance, weights and measurements or other
specifications provided by the Seller are mere approximations and the Seller reserves the right to alter or
amend the same at any time. The S eller reserves the right to correct clerical or technical errors in the
contract documents. The Buyer shall furnish with his order all necessary specifications and information.
The Seller takes no responsibility for goods manufactured, priced or delivered not in accordance with the
order or the specifications unless the Buyer’s
order and specifications are clear and correct.
3. Prices. Unless otherwise provided, all prices contained in our quotations and written acceptances are
ex works and do not include the cost of packing. All orders are accepted on the condition that all such
prices are subject to revision by the Seller at any time before the goods are dispatched to take account of
any price change. In the event that the Buyer does not place the entire order quoted by the Seller for the
Buyer, the Seller reserves the right to revise its prices. The Seller also reserves the right to revise its prices
if the Buyer modifies the specification or quantity of the goods, or the delivery requirements after the order
has been accepted by the Seller.
It is recommended that all installations are checked prior to use to determine
that a seal has been made.
4. Advice. All advice given in connection with the Seller’s goods is provided without charge to the Buyer.
Any advice and assistance given by the Seller to the Buyer is given at the Buyer’s risk and the Seller shall
not be liable for any loss, damage or claim arising therefrom.
John Guest fittings and related products are specifically designed and
manufactured by John Guest to the Technical
Specifications set forth in
John Guest’s Products Catalogs. All John Guest fittings and related products
should be selected, installed, used and maintained in accordance with these
Technical Specifications. It is the customer/user
’s responsibility to ensure that
John Guest fittings and related products are suitable for their intended
applications, are properly installed and maintained, and are used in accordance
with T echnical Specifications. It is also the
customer’ s/user’s responsibility to
provide its own customers with any relevant technical information about John
Guest products it supplies to them. If you would like to request a copy of the
Technical Specifications, or if you have any questions about those
Specifications, please contact John Guest USA at 1 (800) 945 4872, or visit
the John Guest website at www.johnguest.com
5. Payment. (a) Unless otherwise provided in the Agreement, or explicitly agreed upon in writing by the
Seller, payment is due in full 30 days from date of shipment of the items purchased herein under.
(b) In the
case of an installment contract, deliveries or parts, payment for each installment delivery or part shall be
made under subclause (a) as if the same constituted a separate agreement. (c)
Amounts not timely paid
shall bear interest at the rate of 2-1/2% above the Seller’s
bank’s prime rate from time to time in force.
(d) In the event that the Buyer fails within one calendar month of the date for payment to effect any
payment which may be due under the Agreement or any agreement with the Seller,
or if the Buyer
commits any breach of the Agreement, or if the Buyer becomes insolvent or commits any act of bankruptcy
or contemplation of liquidation, the Seller will be entitled, without
prejudice to the Seller’s other rights, to
terminate the Agreement or any unfulfilled part thereof, or at the Seller’s option to make partial deliveries.
28mm
12”
Clip spacing (in mm)
For surface mounted pipes
Pipe Diameter
•
•
Working temperatures and pressures.
Hot water
System testing. To ensure the pipework and fittings have been installed
correctly, whether it be on a new or extended system, it is essential that the
system is checked and hydraulically wet tested. Testing should be at 30 psi
for 10 minutes and 150 psi for 10 minutes.
This testing, combined with other
relevant checks, should reveal installation problems and is regarded as
good plumbing practice. However , system testing should not be regarded as
substitute for correct installation (see Making a Good Connection)
6. Modifications and Cancellations. This Agreement is not subject to oral modification or cancellation.
A Buyer’s request for modification or cancellation will not be incorporated into the Agreement unless the
request is accepted by the Seller in a writing
that amends the Agreement. Acceptance of any such
requested modification or cancellation shall be at
the Seller’s discretion and shall be upon such terms and
conditions as the Seller may require.
7. Handling Charge. Goods supplied in accordance wi th the Buyer’s order may later be returned to the
Seller at the Seller’s discretion provided the return is pre-authorized, in writing and the merchandise is
unused, in original packages, unaltered, clean and no older than 60 days from the date of shipment by the
Seller. The Buyer will be required to pay to the Seller a handling charge of 15% of the purchase price of
the returned goods. A copy of the original invoice for the merchandise must accompany all returns.
8. Delivery. (a) Any delivery dates quoted are approximate only and the Seller shall have no liability for any
delays in delivery. (b) Unless provided otherwise, delivery of the goods shall be made when the Seller has
notified the Buyer that the goods are ready for dispatch. Regardless of the method of delivery, delivery shall
be made F.O.B. Seller’s plant, where the risk of loss shall thereupon pass to the Buyer upon
the Seller’s
delivery to a carrier. Notwithstanding that the Seller’s prices are ex
-works, the Seller is prepared by
special contract to procure carriage or freight and insurance on behalf of the Buyer and at Buyer’s
cost in
which event the Seller shall be under no liability for damage in transit or loss or damage to the goods
beyond the point at which the Seller contracts to deliver the same. (c) Seller will not make drop shipments.
9. Inspection and Rejection. (a) The following provisions shall apply in relation to all deliveries of goods:
the Seller shall not be held liable for any claims of damage in transit, shortage of delivery or loss of goods,
unless in the case of shortage of delivery, a separate notice in writing is given to the carrier concerned and
to the Seller within three (3) days of the receipt of the goods, followed by a complete claim in writing
within five (5) days of receipt of the goods and in the case of loss of goods, a separate notice in writing is
given to the carrier concerned and to the Seller and a complete claim in writing made within thirty (30) days
of the date of consignment. The Buyer must inspect the good
s on arri val from the carrier, however, where
goods are accepted from the carrier concerned without being inspected, the delivery book of the carrier
concerned must be signed “not examin ed”. The Seller shall have the right to inspect the goods at the
Buyer’s premises in respect to any such claims made by the Buyer and the Buyer shall retain such goods
until the Seller has inspected such goods or until the Seller has notified the Buyer that the Seller does not
wish to inspect such goods. Any breach of these conditions in this provision shall serve as a waiver to any
claim brought by the buyer. (b) Without prejudice to the Seller’s other rights, should the Buyer fail for any
reason to send the Seller forwarding instructions within ninety (90) days after the date of the Seller’s
notification that the goods are ready for dispatch or to accept delivery of the goods, the Seller shall be
entitled at the Buyer’s risk and expense to store the goods and/or to procure or effect storage of the goods
elsewhere. Goods so stored shall be paid for as if they had been dispatched and/or accepted.
10. Special Tooling. Where it is necessary for the Seller to manufacture or to purchase special tooling,
including without limitation tools, dies, jigs, mandrills, fixtures, molds, and patterns in order to execute a
contract, the Buyer will be charged with a proportion of the cost of such special tools. Such special tooling
shall be and remain the Seller’s property notwithstanding payment of any charges made by the Buyer.
In no event will the Buyer acquire any interest in apparatus belonging to the Seller which is utilized in the
manufacture of the items sold hereunder, even
if such apparatus has been specially converted or
adopted for such manufacture and notwithstanding any charges paid by the Buyer therefor.
Unless otherwise agreed, the Seller shall have the right
to alter, discard or otherwise dispose of any
special tooling or other property in its sole discretion at any time.
11. Test and Performance. (a) The Seller’s goods are, where practicable, submitted to the Seller’s
standard test before delivery. If special tests are required, these shall be made at the Seller’s
premises
unless otherwise agreed, and will be subject to an extra charge. (b) The Seller accepts no liability for
failure to attain any performance figures quoted by the Seller unless the Seller specifically has guaranteed
them with an agreed sum as liquidation damages and the Buyer has suffered actual loss by reason of the
failure to attain the figures quoted. (c) Any particulars of weights and measurements, power and
consumption, power output or performance relating to the goods and like matters furnished by the Seller
to the Buyer in the Seller’s catalogs, literature or otherwise, are approximate and are intended only to
present a general idea of the goods to be supplied and unless previously agreed specifically in writing shall
not form part of the Agreement.
12. Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or
equipment furnished to the Seller by the Buyer, or any other items which become the Buyer’s
property,
may be considered obsolete and may be destroyed by the Seller after two (2) consecutive years have
elapsed without the Buyer placing an order for the items which are manufactured using such property.
The Seller shall not be responsible for any loss or damage to such property while it is in the Seller’s
possession or control.
13. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use,
property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture,
sale or delivery of the items sold hereunder. If any
such taxes must be paid by the Seller, or if the Seller is
liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the item sold.
The Buyer agrees to pay all such taxes or to reimburse the Seller therefor upon receipt of its invoice. If the
Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, the Buyer shall
promptly indemnify and hold the Seller harmless from and against any such tax, as well as any interest or
penalties thereon which may be assessed if the items are held to be taxable.
14. Warranty. (a) The Seller warrants that the items sold hereunder shall be free from defects in material
or workmanship at the time of shipment by the Seller. The Seller warrants that if within 12 months of
delivery of the goods to the Buyer the Buyer returns immediately to the Seller’s premises any of the said
goods which the Buyer believes to be defective, carrier paid, properly packed and clearly marked with the
Buyer’s full name and address and any other information such as serial numbers which may be necessary
to enable the goods to be identified, together with a complete description of the respects in which it is
alleged that the goods are defective, they will be repaired or new goods will be supplied in exchange and
the goods so repaired or such new goods will be delivered to the Buyer free of charge at the Seller’s
premises provided that the foregoing warranty shall only be applicable if upon demand by the Seller, the
Buyer proves to the Seller’s satisfaction: (i) that the defect was due solely to defective workmanship; (ii)
that no alterations or repairs have been made to the goods ex
cept with the Seller ’s written consent; (iii) that
the defect was not caused by any act of the Buyer or its agents; and (iv) that the defect was not caused
by any matter beyond the reasonable control of the
Seller, including, without limitation, accident or normal
wear and tear. (b) All costs and expenses, including freight charges, customs duties, and insurance
incurred in returning the goods to the Seller’s premises in accordance with this provision shall be paid by
the Buyer. The benefit of this warranty shall not be assignable by the Buyer. (c) The warranty contained in
sub-paragraph (a) above does not extend to any goods not manufactured by the Seller even though
supplied by the Seller nor does it extend to any second-hand or reconditioned goods nor does it extend to
components manufactured by the Seller but installed, attached or welded by the Buyer or his customer on
equipment not manufactured by the Seller. Goods not manufactured by the Seller carry only the warranty
(if any) of their makers and the Buyer is entitled to the benefit thereof only so far as the Seller has the
power to transfer it. (d) This warranty comprises the sole and entire warranty pertaining to items provided
hereunder, the Seller makes no other warranty, guarantee, or representation of any kind whatsoever. All
other warranties, including but not limited to, merchantability and fitness for purpose, whether expressed
or implied, or arising by operation of law,
trade usage, or course of dealing are hereby disclaimed. (e)
Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or
partially to the Buyer’s designs or specifications.
15. Limited Remedy. The Seller’s liability arising from or in any way connected with the items sold or this
Agreement shall be limited exclusively to repair or replacement of the items sold. In no event shall the
Seller be liable to the Buyer or any 3rd party for any incidental, consequential or special damages of any
kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with
this agreement or items sold hereunder, whether alleged to arise from breach of contract, express or
implied warranty, or in tort, including without limitat
ion, negligence, failure to warn or strict liability.
16. Indemnity for Infringement of Intellectual Property Rights. (a) The Buyer shall defend and indemnify
the Seller against all actions, claims, demands, penalties and costs by 3rd parties in tort, or for
infringement, or alleged infringement, of patents, trademarks, copyrights, trade dress, trade secret or other
rights of any 3rd party resulting from the goods manufactured
in accordance with the Buyer ’s specifications
or based on any information provided by the Buyer. The
Buyer will defend any action against the Seller for
title, patent, trademark, copyright infringement, or other claimed by a 3rd party at the Buyer’s sole cost and
expense. (b) The Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade
dress, trade secrets or similar rights except as provided
in this provision. The Seller will defend and
indemnify the Buyer against allegations of infringement of US patents, US trademarks, copyrights, trade
dress and trade secrets (“Intellectual Property
Rights”). The Seller will defend at its expense and will pay
the cost of any settlement or damages awarded in an action brought against the Buyer based on an
allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a 3rd party.
The Seller’s obligation to defend and indemnify the Buyer is contingent on the Buyer notifying the Seller
within 10 days after sole control over the defense of any allegations or actions, including all negotiations
for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual
Property Rights of a 3rd party, the Seller may, at its sole expense and option, procure for the Buyer the
right to continue using said item, replace or modify said item
so as to make it noninfringing, or offer to
accept return of said item and return the purchase price less a reasonable allowance for depreciation.
Notwithstanding the foregoing, the Seller shall have no liability for claims of infringement based on
information provided by Buyer, or directed to items delivered hereunder for which the designs are
specified in combination or use in a system of any item
sold hereunder. The foregoing in this provision shall
constitute the Seller’s sole and exclusive liability and the Buyer’s sole and exclusive remedy for
infringement of Intellectual Property Rights.
17. Lien. In addition to any right of lien to which the Seller may by law be entitled, the Seller shall have a
general lien on all goods of the Buyer in the Seller’s possession (although such goods or some of them
may have been paid for) for the unpaid price of any other goods sold and delivered to the Buyer by the
Seller under the same or other contracts.
18. Waiver. The Seller’s rights shall not be affected or restricted by any indulgence or forbearance
granted to the Buyer. No waiver by the Seller of any breach shall operate as a waiver of any later breach.
19. Force Majeure. The Seller shall be excused from performing any of its obligations under this
Agreement which are prevented or delayed by any occurrence not within the reasonable control of the
Seller, including but not limited to, accidents, acts of God, destruction or damage to the goods or the
Seller’s manufacturing plant, delays or failures in delivery of carriers or suppliers, shortages of materials,
strikes or other labor matters, floods, earthquakes, fire, riots, explosions, or any regulations, rules,
ordinances or orders of any governmental authority
, federal, state or local, whether such cause exists at
the date of the order or not.
20. Buyer’s Representation of Solvency. The Buyer hereby represents that as of the signing of this
Agreement it was not insolvent within the meaning of the Uniform Commercial Code or the Bankruptcy
Laws of the United States.
21. Assignment and Delegation. The rights and obligations of the parties under this Agreement may
not be assigned or delegated, except on the express written consent of the other party to the
assignment or delegation.
22. Integration. The rights and obligations of the parties and the terms and conditions set forth herein,
together with any amendments, modifications and any different terms and conditions expressly accepted
by the Seller in writing, shall constitute a complete and exclusive statement of the terms of this Agreement.
This Agreement supersedes not only all prior agreements, but also oral agreements made
contemporaneously with the execution of
this Agreement. All such materials may not be used to
supplement, explain, or contradict the terms of this Agreement.
23. Severability. If any of these conditions or any part thereof purports to exclude or restrict or limit any
liability and such exclusion or restriction or limitation is prohibited or rendered void or unenforceable by any
legislation to which it is subject, or is itself prohibited or rendered void or unenforceable by any legislation
to which it is subject, then the exclusion restriction or limitation on the condition or part thereof in question
shall be so prohibited or rendered void or unenforceable and the validity or enforceability of any other part
of these provisions shall not thereby be affected.
24. Governing Law/Limitation on Actions. The terms, conditions, rights, and obligations under this
Agreement shall be construed under the laws of the State of New Y
ork, without regard to principles of
conflicts of laws. No actions arising out of the sale
of the items sold hereund er or this Agreement may be
brought by the Buyer more than two (2) years after such cause of action accrues.
Rev. 2/04
10