Mouldings

Transcription

Mouldings - Hamilton Building Supply

Mouldings
Uniquely detailed designs match any decor
Authentic architectural profiles for interior or exterior use
One-piece combinations of several profiles save time and labor
Moulded inside and outside corners, plinth blocks and rosettes make
installation hassle-free
MOULDINGS
Mouldings
4
3
5
1
2
6
1
MLD472-12
Crown Fascia
2
MLD612-12
Chair Rail
3
MLD730-8
Ogee Moulding
4
MLD454-12
Crown Moulding
5
MLD237-16
Door & Window Casing
6
MLD214-12
Door & Window Casing
7
MLD735-16
Beaded Flat Trim
8
MLD603-8
Quarter Round
9
MLD610-8
Chair Rail
10
MLD641-16
Cornice Moulding
11 MLD600-8
Florentine Fascia
2
7
12 MLD215-8
Window & Door Casing
8
Break the Mould
Mouldings
9
Take the ordinary and make it magnificent with more than 100 authentic
architectural styles — from massive cornice mouldings and dentil profiles
to delicate Florentine trim and chair rails. For the ultimate in easy installation,
Fypon® miterless accessories eliminate the need to figure complex corner
calculations. Whether you want a simple, elegant design or something more
elaborate, a variety of styles, sizes and combinations allow you to create
a look like no other. For installation instructions, please visit the Product
10
11
2
12
Support section at www.fypon.com.
38
www.fypon.com
Phone 800.446.3040 • Fax 800.446.9373 U.S. and Canada
®
Adhesive.
Mouldings
Use the pages of this section as fuel for your imagination. Within each category, products are arranged by height from smallest to largest
to help you choose the product that best fits your application. The large variety of sizes and styles can be applied to a home or building.
Mouldings can be used individually or combined to create a new and distinctive look.
Brick Mould
Dimensions for Blocking
Not all dimensions needed to install blocking are provided in this
catalog. In addition, some products may have a material-saving void
on the back of the part that is not depicted in the catalog photos. You
may request a drawing that shows additional product dimensions by
contacting Customer Service.
Part Number
MLDWM180-8
Projection
Width
Thickness
Length
1 /"
2"
1 / "
8'
14
1 16
MLDWM180-16
1 1/4"
2"
1 1/16"
16'
MLDWM181-16
13 16
/ "
2"
58
/"
16'
MLDWM182-12
1 1/4"
3"
1 1/16"
12'
MLDWM183-16
1 1/2"
2 1/8"
1 5/16"
Keystone
Remember to Order Adhesive
A urethane-based adhesive must be used on all joint surfaces.
See page 138 to order *PL Premium® Adhesive.
KWM180M
16'
EXTERIOR
DTLB6X4X6
MLD330
K6M
Each category chart includes a product photo, part numbers and product
dimensions. The accessory matches for each part are listed in the outlined
inset to the far right of each chart.
Understanding Part Numbers
INTERIOR
MLD400
MLD205
WCH36X6
MLD610
PB3X3
MLD611
FLT152
PB3X3
Our stock products are coded alphanumerically, starting with letters that signify the product type. The moulding style appears next as
designated by three numbers. Following the dash is the moulding length in feet. Note the examples below.
Inside Corner
Moulding Accessories
Outside Corner
The following accessories are available to make moulding installations quick and easy. Inside
and Outside Corners eliminate the hassle of figuring complex miter cuts. Divider blocks and
Rosette
rosettes can be used between moulding lengths to eliminate the need for patching smooth seams.
All moulding accessories are unattached and must be ordered separately. See the Miterless
Accessories on page 41 for more information.
Divider Block
Keystone
Custom Products
If a truly unique design is required, Fypon can create it for you. Please fill out our Custom Quote Request form, which
can be obtained by visiting the Products section of our website or by contacting Customer Service. Your request will then be quoted by our
Custom Product Sales Department.
www.fypon.com
*PL Premium® is owned by Henkel Corporation.
39
Mouldings
A urethane-based
adhesive must be used on all joint surfaces. See page 138 to order PL Premium
How
to Order
Mouldings
A urethane-based adhesive must be used on all joint surfaces. See page 138 to order PL Premium® Adhesive.
Flat trim sizes continued
Flat Trim
Flat Trim is listed in order by thickness then by width.
Part Number
Thickness
Plinth Block
Part Number
Thickness
Width
Length
FLT159-8
1"
5 1/2"
8'
FLT159-12
1"
5 /"
12
12'
Plinth Block
Page 35
PB6X6
Other
Accessories
Pages 32-33
6F Arches
K6TF
KP6TF
FLT159-16
1"
5 1/2"
16'
FLT162-6
1"
7 1/2"
6'
PB7X7
FLT162-8
1"
7 1/2"
8'
Other
Accessories
FLT162-14
1"
7 1/2"
14'
Width
Length
/"
1"
8'
—
/"
3"
16'
—
FLT170-12
1"
9 1/2"
12'
—
/"
14"
8'
—
FLT170-16
1"
9 1/2"
16'
—
/"
4 3/4"
12'
—
FLT172-16
1"
11 1/2"
16'
—
/"
24"
8'
—
FLT175-12
1"
12"
12'
—
/"
1 1/2"
12'
—
FLT179-12
1"
16"
12'
—
/"
2 1/8"
8'
—
FLT180-12
1"
24"
12'
—
/"
2 1/8"
10'
—
FLT119-17
1"
32 1/4"
16' 11"
—
/"
3"
12'
PB3X3
PB4X4
FLT184-16
1 1/2"
1 1/2"
16'
—
/"
3 1/2"
16'
PB4X4X1
FLT194-10
1 1/2"
3 1/2"
10'
—
/"
5 1/2"
16'
—
FLT183-12
1 1/2"
5 1/2"
12'
—
/"
6"
12'
PB5X5
PB5X5A
FLT163-16
1 1/2"
7 1/2"
16'
—
/"
7 1/4"
16'
—
FLT182-12
1 1/2"
12 1/4"
12'
—
/"
8"
8'
—
FLT185-12
1 1/2"
16 1/2"
12'
—
FLT190-12
2"
4"
12'
—
Page 35
FLT177-8
12
FLT131-16
12
FLT178-8
12
FLT100-12
58
FLT181-8
58
FLT101-12
34
FLT102-8
34
FLT102-10
34
FLT103-12
34
FLT122-16
34
FLT110-16
34
FLT109-12
34
FLT186-16
34
FLT113-8
34
FLT118-8
34
/"
10"
8'
—
FLT152-8
1"
3 1/2"
8'
PB4X4
PB4X4X1
FLT152-12
1"
3 1/2"
12'
Other
Accessories
Pages 32-33
FLT152-16
1"
3 1/2"
16'
K4TF
KP4TF
4F Arches
FLT153-12
1"
4"
12'
—
Page 33
K8TF
Need a synthetic board for fabrication?
Try our PVC sheets and boards as an alternative to urethane flat trim
for projects that require milling or routing. See the PVC Trim section on
pages 134 - 137.
Flat trim sizes are continued in the next column
40
www.fypon.com
Timber Flat Trim
Miterless
Accessories
Woodgrain/Stainable
Part Number
Thickness
Width
Length
/"
3 1/2"
12'
/"
5 1/2"
12'
/"
7 1/2"
12'
FLT151-12S
34
FLT110-12S
34
FLT187-12S
34
FLT173-12S
34
/"
11 1/2"
12'
FLT150-12S
1 1/2"
3 1/2"
12'
FLT111-12S
12
1 /"
12
5 /"
12'
FLT197-12S
1 1/2"
7 1/2"
12'
FLT192-12S
1 1/2"
11 1/2"
12'
Timber Buried Header
Woodgrain/Stainable
Part Number
Width
DTLB6X4X6
6 1/8"
4 3/4"
MLD240 Pg. 43
MLD250 Pg. 43
MLD310 Pg. 44
DTLB9X11X16
9 1/4"
11 1/4"
MLD240 Pg. 43
MLD250 Pg. 43
MLD310 Pg. 44
MLD332 Pg. 45
MLD404 Pg. 47
MLD456 Pg. 49
MDB432
4 11/16"
1 1/4"
MLD432
MDB493
6 15/16"
3 1/8"
MLD493
MIC1
3 1/8"
—
MOC1
3 1/8"
—
Divider Block
Divider Block
Divider Block
Divider Block
MLD388-12S
Width
Height
Length
Thickness
6"
6"
12'
1"
MLD398-12S
8"
10"
12'
1"
MLD397-12S
10"
16"
12'
1"
Design Ideas
Outside Corner
Page 48
Page 50
MLD452
Page 49
Inside Corner
Part Number
Moulding
Match
Height
MLD452
Page 49
Additional miterless accessories — plinth blocks and keystones — can be
found on pages 33 and 35 in the Window and Door Trim section.
One piece of 12' flat trim and four matching plinth blocks can be used to
create a simple window surround that can be installed in less than
15 minutes.
Combine a simple window casing with flat trim to quickly and easily trim
out the interior of a new retrofit window. The flat trim, used as a jamb
extension, will hide any broken plaster that was damaged when removing
the old window.
www.fypon.com
41
Mouldings
Mouldings
Brick Mould
Plinth Block
Projection
Width
Length
MLD208-16
1"
14
7 /"
16'
PB7X7
MLD209-14
1 1/2"
24"
14'
—
MLD211-16
34
/"
5 1/8"
16'
PB5X5
PB5X5A
PB6X6
MLD214-12
2"
2 7/8"
12'
—
MLD215-12
1 3/4"
3 1/2"
12'
PB215
Part Number
Page 35
Fluted Casing
Part Number
Projection
Width
Thickness
Length
MLDWM180-8
1 1/4"
2"
1 1/16"
8'
MLDWM180-8S
1 1/4"
2"
1 1/16"
8'
MLDWM180-16
1 1/4"
2"
1 1/16"
16'
MLDWM181-16
13 16
/ "
2"
58
/"
16'
MLDWM183-16
1 1/2"
2 1/8"
1 5/16"
16'
MLDWM182-12
1 1/4"
3"
1 1/16"
12'
Woodgrain/Stainable
Fluted Casing
Keystone
Page 23
KWM180M
4M Profile
Other
Accessories
Pages 32-33
K4TM
KP4TM
4M Arches
Window & Door
Casing
MLD220-12
6M Profile
1 3/4"
5 1/2"
12'
Other
Accessories
MLD220-16
1 3/4"
5 1/2"
16'
MLD221-8
13/4"
7"
8'
6M Profile
PB220
Pages 32-33
K6TM
KP6TM
6M Arches
Other
Accessories
Page 17
Part Number
MLD205-8
Projection
/"
78
Width
Length
3"
8'
MLD205-12
78
/"
3"
12'
MLD207-16
1"
5 1/4"
16'
Crossette
System
MLD221-16
13/4"
7"
16'
MLD223-16
2 1/2"
14 1/2"
16'
—
MLD224-12
1 1/2"
5 1/2"
12'
—
Plinth Block
Page 35
PB3X3
PB4X4
PB6X6
Fluted Casing
Window & Door Casing sizes are continued on the next page
42
www.fypon.com
sizes continued
Part Number
MLD225-12
Projection
Width
Length
1 /"
8 /"
12'
12
12
Plinth Block
Page 35
—
Part Number
MLD240-8
Projection
Width
Length
3 /"
4"
8"
14
Divider Block
Page 41
DTLB6X4X6
DTLB9X11X16
www.fypon.com
MLD226-8
11/2"
5 1/2"
8'
MLD226-10
11/2"
5 1/2"
10'
MLD226-12
12
1/"
12
5 /"
12'
MLD226-16
11/2"
5 1/2"
16'
MLD227-16
11/2"
9"
16'
MLD228-16
2"
6 3/8"
MLD231-12
1"
MLD232-16
19/16"
MLD241-16
1 17/32"
4 3/4"
16'
—
—
MLD245-12
1 15/16" 8 13/16"
12'
—
16'
—
MLD246-16
3 3/8"
9 1/8"
16'
—
1 3/4"
12'
—
MLD247-16
1 3/8"
8 3/4"
16'
—
7 7/8"
16'
—
MLD250-8
1 3/4"
4 1/2"
8'
MLD250-10
1 3/4"
4 1/2"
10'
MLD250-12
1 3/4"
4 1/2"
12'
MLD253-16
2 3/8"
7 5/8"
16'
PB220
MLD234-16
1"
3 7/16"
16'
—
MLD236-16
2"
5 1/2"
16'
PB220
MLD237-16
1 1/8"
3 1/2"
16'
—
DTLB6X4X6
DTLB9X11X16
—
43
Mouldings
Mouldings
Dentil Moulding
Part Number
Projection
Height
Length
Bottom Thickness
/"
1 1/4"
5'
3
/"
1 1/4"
5'
3
Tooth & Space
Design Repeat
Divider Block
Page 41
/16"
34
/"
1 1/2"
_
/16"
1 1/4"
2 1/2"
_
/16"
1 1/4"
2 1/2"
/ "
1 1/2"
3"
/ "
1 1/2"
3"
7 16
/ "
1 1/2"
3"
_
_
_
_
/"
1"
2"
_
/"
2 1/4"
4 1/2"
/"
2 1/4"
4 1/2"
/"
2 1/4"
4 1/2"
/"
2"
4"
MLD303-5
58
MLD304-5
58
MLD304-8
58
/"
1 1/4"
8'
3
MLD310-8
1 1/4"
4 1/2"
8'
7 16
MLD310-12
1 1/4"
4 1/2"
12'
7 16
MLD310-16
1 1/4"
4 1/2"
16'
MLD311-16
5 3/8"
7 3/4"
16'
MLD313-8
2 1/4"
2 3/8"
8'
14
MLD320-8
1 5/8"
5 3/4"
8'
38
MLD320-12
1 5/8"
5 3/4"
12'
38
MLD320-16
1 5/8"
5 3/4"
16' 1/2"
38
MLD330-12
1 5/8"
7"
12'
78
DTLB6X4X6
DTLB9X11X16
Dentil
—
—
Dentil Fascia
Dentil moulding sizes are continued on the next page
44
www.fypon.com
Dentil moulding sizes continued
Part Number
Projection
Height
Length
Bottom Thickness
MLD331-16
1 3/8"
9 1/2"
16' 1 1/2"
34
MLD332-8
1 5/8"
5"
8'
78
MLD333-12
1 3/16"
11 1/2"
12' 4 1/2"
58
MLD335-12
3 3/8"
6 1/8"
12'
12
Tooth & Space
Design Repeat
/"
2 1/4"
4 1/2"
/"
2"
4"
/"
2 3/4"
5 1/2"
/"
3 11/16"
7 1/4"
Divider Block
Page 41
_
Dentil Fascia
DTLB9X11X16
Dentil Fascia
_
Dentil Fascia
Large Classic
Dentil
—
Tooth
3 9/16"
Space
MLD336-16
/ "
2 1/2"
5"
_
/"
2 3/ 16"
3 11/ 16"
_
3 1/8"
9 3/8"
16' 1"
11 16
/"
3 1/2"
8' 3 3/4"
12
Dentil
MLD350-8
78
Dentil Block
Tooth
1 1/2"
Space
MLD351-8
1 1/4"
3 1/4"
8' 2"
1 1/4"
3 1/2"
7"
_
MLD352-8
2"
3 1/2"
8' 3 3/4"
2"
2 3/16"
3 11/16"
_
8 3/4"
_
Dentil Block
Dentil Block
Tooth
1 1/2"
Space
MLD353-8
1 1/4"
4 7/16"
8' 1/4"
1 1/4"
4 3/8"
Dentil Block
www.fypon.com
45
Mouldings
Mouldings
Dentil Moulding
Continued
Part Number
Projection
Height
Length
Bottom Thickness
Tooth & Space
Design Repeat
MLD354-12
1"
3 1/16"
12' 2 1/4"
1"
1 5/8"
3 1/4"
MLD355-8
58
/"
2 1/2"
8' 3/8"
58
/"
1 3/8"
2 1/8"
Dentil
Dentil
Tooth
/"
34
Space
MLD356-12
1 3/8"
1 7/8"
12'
1 3/8"
Dentil
1 1/4"
2 3/8"
Tooth
1 1/8"
Space
MLD360-8
3 1/2"
3 3/4"
8'
/"
38
Beveled Dentil
Block
3 3/4"
8"
Tooth
4 1/4"
Space
MLD362-16
5 5/32"
8 3/8"
16'
1 1/4"
Dentil
2 1/2"
Tooth
4 1/2"
2"
Space
MLD364-12
8 11/16"
11 5/16"
12'
1"
MLD365-16
4 15/16"
4 31/32"
16'
—
Dentil
_
_
2 1/4"
4 5/8"
Tooth
2 3/8"
Space
MLD370-8
6 1/2"
7 1/2"
8'
Dentil Block Soffit
1"
4 3/4"
19 3/16"
Tooth
14 7/16"
Space
46
www.fypon.com
Part Number
Tooth & Space
Design Repeat
Divider Block
Page 41
1"
_
_
_
/"
_
_
_
/ "
—
Projection
Height
Length
Bottom Thickness
MLD371-16
6 1/2"
11"
16'
MLD372-14
8 1/4"
13 7/8"
14'
34
MLD400-8
2 15/16"
2 11/16"
8'
18
/"
/ "
9 16
15 16
Tooth
/"
38
Space
MLD404-12
2 1/2"
3 7/8"
12'
34
MLD404-16
2 1/2"
3 7/8"
16'
34
MLD405-12
3 5/8"
5 23/32"
12' 6"
58
MLD406-16
3 3/8"
4"
16'
38
/"
34
/"
34
/"
/"
/"
1 1/2"
/"
1 1/2"
58
/"
12 1/2"
—
1 1/4"
2"
—
DTLB9X11X16
E-Vent Match
Page 62
EV404
Tooth
/"
34
Space
/ "
1 1/2"
3"
_
/"
1 1/2"
3"
_
/ "
2 15/16"
4"
_
MLD410-12
3 1/4"
6 7/8"
12'
7 16
MLD411-16
4 1/2"
7"
16'
12
MLD412-16
5 3/8"
10 21/32"
16'
7 16
Tooth
1 1/16"
Space
www.fypon.com
47
Mouldings
Mouldings
Dentil Moulding
Continued
Part Number
MLD413-12
Divider Block
Page 41
Projection
Height
Length
Bottom Thickness
Tooth & Space
Design Repeat
8 1/2"
11 1/4"
12'
115/32"
3"
5 7/8"
_
Tooth
2 7/8"
Space
MLD419-12
6 3/4"
14 1/2"
12' 4 5/16"
1 1/2"
1 1/2"
3"
_
MLD421-12
10"
14 1/2"
12'
34
/"
2"
6"
_
_
_
13 1/2"
_
2 5/8"
_
Tooth
4"
Space
MLD423-12
2 13/16"
5"
12'
7 16
MLD425-12
4 1/8"
9 1/2"
11' 5"
34
/ "
/"
_
/"
58
Tooth
/ "
13 16
Space
MLD430-12
5 3/4"
8"
12' 2 1/4"
/ "
5 16
Classic Crown
Dentil
1 3/4"
Tooth
/"
78
Space
MLD432-12
3 15/16"
4 9/16"
12' 3"
3 16
MLD434-16
3 3/4"
16"
15' 9"
1 1/2"
Dentil
/ "
/"
1"
9"
21"
12
MDB432
_
Tooth
12"
Space
48
www.fypon.com
Mouldings
Part Number
Projection
Height
Length
Bottom Thickness
Tooth & Space
Design Repeat
9"
10"
16'
1 /"
3 /"
7 3/8"
MLD435-16
34
12
Tooth
3 7/8"
Space
/"
_
_
/"
4"
6 5/8"
MLD436-16
5 1/2"
6 3/4"
16'
12
MLD440-12
6 1/2"
7 1/2"
12'
38
Tooth
2 5/8"
Space
Crown Moulding
Projection
Width
Length
Bottom
Thickness
MLD452-8
2"
3"
8'
14
MLD452-12
2"
3"
12'
14
MLD453-16
4 3/4"
6 3/4"
16'
7 16
Part Number
/"
/"
/ "
Projection
Width
Length
Bottom
Thickness
MLD449-16
7 3/32"
8 1/2"
16'
5 32
/ "
MLD454-12
3 19/32" 4 1/32"
12'
7 32
MLD450-16
11 7/16"
9 5/8"
16'
1 9/16"
MLD455-12
1 1/4"
1 13/32"
12'
5 16
MLD451-16
3 3/16"
3"
16'
12
/"
MLD456-12
2 3/4"
4 3/8"
12'
5 16
2 3/4"
4 3/8"
16'
5 16
Part Number
/ "
/ "
Bed Moulding
/ "
Divider Block Page 41
DTLB9X11X16
MLD456-16
/ "
Divider Block Page 41
DTLB9X11X16
Crown moulding sizes are continued on the next page
www.fypon.com
49
Mouldings
Crown Moulding
Part Number
Continued
MLD480-12
Projection
Height
Length
Bottom
Thickness
7 7/8"
8 7/8"
12'
38
14 13/16" 17 3/8"
12'
1 11/16"
11' 5"
14
/"
Massive Crown
Ships in 2 pieces
Length
Bottom
Thickness
6 31/32" 7 19/32"
12'
34
4 3/8"
12'
34
Part Number
Projection
MLD457-12
MLD460-12
Height
5 1/4"
MLD481-12
/"
/"
MLD490-12
Classic Crown
6"
5 3/8"
/"
Crown Florentine
13 1/2"
Design
Repeat
MLD461-8
9 13/16"
19"
8'
1"
MLD491-12
6 1/4"
5 3/8"
12'
/"
14
Acanthus Leaf
4"
MLD462-16
2 3/4"
3 1/4"
1 1/2"
1"
Tooth
Space
16'
Design
Repeat
/"
38
MLD493-12
5 17/32" 6 21/32"
12'
/"
38
Crown Leaf
4"
Divider Block
Accessory
Design
Repeat
Page 41
MDB493
MLD467-16
2 3/4"
4 3/4"
16'
/"
34
MLD495-16
5 7/16" 10 1/16"
16'
/"
58
Leaf Crown
7 3/4"
Design
Repeat
MLD470-12
10 1/16"
6"
12'
1 3/4"
Massive Crown
3
1
MLD471-12
7 1/8"
4 5/8"
12'
4
/"
58
Massive Crown
MLD472-12
50
2
11 1/4" 15 1/2"
12'
1 1/16"
2
1
MLD452-12
Crown Moulding
3
85013
PVC Flat Trim (Heat Bent)
2
MLD234-16
4
Special Order
Plain Corbel
www.fypon.com
Mouldings
Projection
Height
Length
Bottom
Thickness
MLD505-8
3 3/8"
13"
8'
15 16
MLD506-16
3"
16 3/8"
16'
78
MLD508-12
3 9/16"
8 3/8"
MLD509-16
3 1/4"
MLD510-12
Part Number
Projection
Height
Length
Bottom
Thickness
MLD513-16
4 1/8"
4 3/8"
16'
34
MLD520-16
6 7/16"
8 1/16"
16'
Part Number
/"
_
/ "
MLD521-8
4 15/16" 13 1/8"
8'
15 16
/"
MLD522-16
1 5/8"
14 3/4"
16'
1 5/8"
12'
1 5/32"
MLD523-16
2"
5 1/4"
16'
12
5 3/8"
16'
_
MLD524-16
8"
12 1/8"
16'
1"
4 7/16"
5 1/2"
12'
_
MLD527-16
3 1/2"
7 5/8"
16'
_
MLD511-12
5 3/4"
6 9/16"
12'
_
MLD528-12
9 7/16" 15 11/16"
12'
1 1/2"
MLD512-16
8 1/2"
12 1/8"
16'
_
MLD530-8
1 1/2"
8'
1 1/2"
Massive Fascia
/ "
Sign Fascia
Sign Fascia
12 5/8"
/"
Matches
MLD531 Page 52
Moulding sizes continued on the next page
www.fypon.com
51
Mouldings
Mouldings
Mouldings
Bottom
Thickness
Projection
Height
Length
MLD545-12
10"
9 1/16"
12'
_
Part Number
Continued
Projection
Height
Length
Bottom
Thickness
1 1/2"
12"
8'
1 1/2"
MLD547-16
5 9/32"
8 5/8"
16'
_
MLD532-16
2"
13 1/2"
16'
1 1/4"
MLD548-16
3 3/16"
7 1/2"
16'
1 1/8"
MLD533-12
5 1/2"
17"
12'
2 1/2"
MLD552-12
2 1/16"
3 1/2"
12'
38
Part Number
MLD531-8
Matches
MLD530 Page 51
Trigliph
Step
Classic Crown
Fascia
/"
6 1/4"
Design
Repeat
MLD534-12
8 7/8"
19 1/8"
12'
_
MLD555-12
MLD536-12
8 1/8"
15 1/2"
12'
1"
MLD556-16
10"
15"
16'
2 1/2"
MLD538-16
1 5/8"
8 11/16"
16'
1 9/32"
MLD560-8
5 23/32"
9 5/32"
8'
1 3/8"
5 3/16" 10 11/16"
12'
/"
78
Egg and Dart
5 7/16"
Design
Repeat
MLD541-16
1 1/4"
8 1/8"
16'
MLD562-8
/ "
5 16
2 3/8"
2 15/16"
8' 5"
/ "
7 16
Egg and Dart
6 1/8"
Design
Repeat
MLD543-12
8 1/4"
19"
12'
MLD564-16
—
2 5/8"
5 7/8"
16'
/"
38
Egg and Dart
2 13/16"
Design
Repeat
52
www.fypon.com
Moulding sizes continued
Part Number
MLD565-16
Projection
Height
Length
Bottom
Thickness
2 1/8"
3 1/2"
16'
3 16
/ "
Part Number
Projection
Height
Length
Bottom
Thickness
MLD585-12
10 1/2"
17"
12'
78
/"
Egg and Dart
1"
Design
Repeat
MLD569-12
5 13/16" 7 17/32"
12'
1 3/32"
MLD586-16
7"
16 1/2"
16'
1"
MLD570-12
5 1/2"
6 15/16"
12'
34
/"
MLD587-16
2 3/8"
5 3/4"
16'
11 32
MLD572-16
3 1/4"
4 3/16"
16'
58
/"
MLD588-16
9 1/4"
11"
16'
_
MLD580-12
7 1/8"
12 3/8"
12'
1"
MLD589-16
4 3/8"
6 1/2"
16'
_
MLD581-12
5"
9 15/16"
12'
63 64
/ "
MLD590-16
6"
6 1/4"
16'
_
MLD582-12
7 7/8"
7 7/8"
12'
2 3/8"
MLD591-16
10 1/4"
9 7/16"
16'
_
MLD583-16
8"
8"
16'
_
MLD592-16
3 3/4"
3 7/8"
16'
_
MLD584-16
4 3/4"
4 3/4"
16'
_
MLD593-16
2 1/2"
2 1/2"
16'
_
Classic
Combination
Crown
/ "
E-Vent Match
Page 62
EV570
Massive Crown
E-Vent Match
Page 63
EV580
www.fypon.com
53
Mouldings
Mouldings
Mouldings
Part Number
Continued
Projection
Height
Length
MLD608-12
4 3/4"
5 7/16"
12'
MLD609-12
78
/"
2 1/16"
12'
Bottom
Thickness
_
Decorative Cove
Part Number
MLD600-8
Projection
/"
34
Height
Length
Bottom
Thickness
4 5/16"
8'
14
Florentine
/"
Design Repeat:
5 /"
58
MLD600-10
34
/"
4 5/16"
10'
14
MLD601-12
1 1/2"
1 5/16"
12'
38
MLD602-8
13 16
Florentine
/"
38
Chair Rail
/"
5
Design Repeat: 5 /8"
Design Repeat:
/"
Ogee
1 7/8"
MLD610-8
1 1/2"
2 3/8"
8'
12
MLD611-12
1 1/8"
2 1/4"
12'
38
MLD612-12
34
/"
1 3/8"
12'
18
/"
Chair Rail
/ "
13 16
/ "
8'
58
/"
12
/"
/"
8'
12
/"
Chair Rail
Ogee
Crosshead Trim Strip
MLD603-8
12
/"
/"
Chair Rail
Quarter Round
MLD604-12
1 5/16"
6 3/4"
11' 4"
58
/"
MLD613-12
2 3/8"
2 3/4"
12'
1"
MLD605-12
1 3/4"
3 1/2"
12'
1 3/4"
MLD614-16
1 5/8"
5 9/16"
16'
34
MLD618-16
15 16
/ "
1 1/2"
16'
15 16
MLD621-16
9 16
/ "
2"
16'
18
Bed Moulding
Ribbon & Bow
/"
Chair Rail
Half Round
Outside
Radius
1 3/4"
MLD606-12
5 1/4"
5 1/4"
12'
MLD607-8
2 1/4"
2 1/4"
8'
_
Corner Strip
/ "
Base Cap
Beaded Cove
/"
34
/"
Shingle
Design Tip: Think "outside the box" when designing with
mouldings. For example, a cornice can be used to top off a fireplace
mantle or an Egg and Dart crown can be used to frame a large
painting.
54
www.fypon.com
Moulding sizes continued
Part Number
Projection
Height
Length
Bottom
Thickness
MLD622-4
2 13/16"
4"
4'
1 7/32"
MLD626-8
1 1/32"
1 3/16"
8'
5 32
MLD627-16
1 5/8"
2 1/8"
16'
9 16
Projection
Height
Length
Bottom
Thickness
MLD637-16
9 16
/ "
1 1/2"
16'
13 16
/ "
MLD639-16
1 7/8"
6 1/4"
16'
5 16
/ "
MLD640-8
1"
5 13/16"
8'
1"
/"
MLD641-16
3 3/4"
4 3/8"
16"
_
/"
MLD642-12
12"
11 3/4"
12'
1 3/8"
Chair Rail
Bed Moulding
Chair Rail
MLD628-8
Part Number
/ "
Astragal /
Mullion
/ "
Surround
Scalloped
34
/"
34
/"
8'
14
2 1/4"
2 1/4"
10'
38
/"
3"
16'
34
/"
MLD644-16
3"
9 3/4"
16'
1"
/"
34
/"
8'
3 16
/ "
MLD647-16
1 3/4"
8"
16'
1 3/4"
38
MLD649-16
1 19/32"
2 3/32"
16'
11 32
MLD651-16
2 7/8"
5 1/2"
16'
3 11/16"
Cove
MLD629-10
Bed Moulding
MLD631-16
78
MLD633-8
34
Chair Rail
Ogee
MLD634-16
1 3/8"
1 15/16"
16'
MLD635-12
6"
9"
12'
/"
Ogee
_
Deco
/ "
Bed Moulding
Deco
www.fypon.com
55
Mouldings
Mouldings
Mouldings
Continued
Plinth
Block
Part Number
Projection
Height
Length
MLD735-16
1 1/16"
7 1/2"
16'
_
PS192X5S
2 1/2"
5"
192"
_
Beaded
Part Number
MLD705-16
Projection
/"
34
Height
Length
7 1/2"
16'
Plinth
Block
Page 35
_
Sill
Cove
Woodgrain/Stainable
MLD706-16
/"
58
5 1/4"
16'
PB6X6
1
MLD708-12
1 1/2"
MLD710-10
3 1/2"
12"
12'
_
1 1/2"
10'
_
16'
_
2
Bevel
Sill
MLD715-16
Tapers to
1"
1"
4"
Beaded
3
MLD730-8
1 13/16"
1"
8'
_
4 3/4"
7 1/4"
12'
_
Ogee
MLD732-12
4
5 3/8"
Design
Repeat
MLD734-12
56
14 1/4"
14 1/4"
12'
_
1 MLD610-8
Chair Rail Moulding
3
2 85012
PVC Flat Trim
4 MLD735-16
Beaded Moulding
www.fypon.com
PIL5X108
Adjustable Fluted Pilaster
Mouldings
Table & Blade Angles
Recommended For Mitering 90˚ Corners
Moulding
Part Number
Table Miter
Degree
Saw Blade
Bevel Degree
Rock Moulding
Towards Fence*
Capable of Cutting on
Compound Miter Saw**
MLD400
41°
24°
YES
YES
MLD404
24°
38°
NO
YES
MLD405
25.5°
38°
NO
YES
MLD406
25°
39°
NO
YES
MLD410
17°
42°
NO
YES
MLD411
26°
38°
NO
YES
MLD421
28.5°
36°
NO
MLD423
23°
39°
NO
YES
MLD425
18°
42°
NO
YES
MLD430
19°
42°
NO
MLD432
37°
27°
YES
YES
MLD440
41.5°
20°
NO
YES
MLD452
29°
36°
NO
YES
MLD453
29.5°
36°
NO
YES
MLD456
28°
36°
NO
YES
MLD460
32°
33°
NO
YES
MLD470
41°
20°
NO
MLD471
39.75°
23°
NO
YES
MLD480
42.5°
16°
NO
YES
MLD490
36.5°
28°
NO
YES
MLD491
37°
28°
YES
YES
MLD493
31.6°
34°
NO
YES
MLD510
24°
38°
NO
YES
MLD552
25.5°
38°
NO
YES
MLD555
25°
39°
NO
YES
MLD560
31°
34°
YES
YES
MLD570
31°
35°
NO
YES
MLD580
27.5°
37°
NO
MLD606
35°
30°
NO
YES
MLD608
33°
32°
NO
YES
www.fypon.com
NO
(use table saw)
NO
(use table saw)
NO
(use table saw)
Place moulding face side down.
Place bottom edge of the moulding
toward the fence.
"YES" means to rock the moulding
toward the fence pivoting on the
design (as shown on MLD422).
"NO" means let the moulding lay flat
on the table.
IMPORTANT:
Because the face side of the product is moulded to a more
exacting tolerance, all crown mouldings should be cut with the
face down and the bottom edge of the crown moulding against
the fence on the saw.
For corners that vary from
90,° we recommend the use of
the *Bosch® Digital Protractor
(Model # DWM40L) to easily
find miter and bevel angles for
crown mouldings.
NO
(use table saw)
*Bosch® is owned by Robert Bosch GmbH.
57

Mouldings - Hamilton Building Supply

Transcription

Similar documents

Mouldings - TMP Group

Fypon Mouldings Catalog - Blackstock Lumber Co., Inc.

Mouldings - Fibertech

LOUVERS, CROSSHEADS, MOULDING, DECORATIVE MILLWORK

Louvers / Gable Vents

Louvres / Gable Vents

Mesa Precast Catalog

5" Balustrade System

Fypon Decorative Millwork Catalog

ACCESSORIES - Canyon Creek Cabinet Company

Masonite Craftsman Style Doors with Clear (Low`E