lapham-hickey coil processing

Lapham-Hickey Coil Processing
www.lapham-hickey.com
Lapham-Hickey Products
Coil & Sheet
• Hot Rolled
• Hot Rolled
Pickled & Oiled
• Cold Rolled
• Galvanized
• Strip Steel
• Painted
• Tin Plate
• Flatwire
• Galvalume
Plate
•
•
•
•
•
•
A-36 Plate
Grade 80 Plate
1045 Plate
T-1 Plate
Grade 50 Plate
Armor Plate
Hot Rolled Bar
• 10xx Rounds
• 11xx Rounds
• 41xx Rounds
• A36 Flats
Stainless Steel &
Aluminum
• Aluminum
o Rounds
o Flats
o Angles
o Channels
o Pipe
o Square
Tubing
Steel Tubing
o Rectangular
• WDOM
Tubing
• Electric Welded
o Special
• CD Buttweld
Extrusions
• Hydraulic
• Stainless
• Structural Square
o Rounds &
• Structural Rectangle
Squares
• Bundyweld
o Pipe & Tubing
o Flats
Hot Roll Structurals
o Sheet/Plate
• S Beams
• H Beams
Spring Steel
• WF Beams
• The largest selection
• Angles
of Spring Steel in the
• Channels
country
• MC Channels
• From .002” thick .250”
• Blue Tempered and
Polished
• Scaleless
• Cold Rolled High
Carbon
• Hot Rolled High
Carbon
Welding
Cold Finished Bar
• 10 xx series
• 11 xx series
• 12 xx series
• 41 xx series
• 86 xx series
• Fatigueproof
• Stressproof
SLITTING
Sophisticated Slitting Equipment »
Precise Material »Widest Gauge Range
in the Industry
Our slitting lines are designed for
high efficiency and productive coil
processing
•
•
•
•
•
Gauge Range of .001”-.375”
Width Range of .032” up to 72”
Width Tolerances as close as
+/- .003”
Coils up to 72” OD
Slitters equipped with Cluster
Leveler
Cut-To-Length / Blanking
Cutting Capabilities:
•
•
•
•
Shearing System Capabilities:
Lapham-Hickey strives to continuously improve our processes
by applying Lean Manufacturing practices as well as six sigma
methods as a daily manufacturing guideline. Our commitment
to practicing Lean Manufacturing principles includes having a
certified Six Sigma Black Belt on staff. Lead Manufacturing is a
continuous process that we are using in order to add value and
eliminate waste through Kaizan events, Value Stream Mapping
projects and the training of our employees on theses principles.
ISO Certified
To ensure our internal processes produce the quality
and reliability our customers depend on, all LaphamHickey Steel locations conform to ISO standards. Our
ISO approved management systems validate our
internal business practices, production controls and
quality requirements to get our customer the product
they want consistently.
•
•
•
•
•
•
Minimum Thickness: .015
Maximum Thickness: .375
Maximum Length: 10’
CNC Auto Feed
Front Gauging
Automatic Unloading &
Stacking
Gauge Range - .012” thick
through .625” thick
Up to 72” Wide
+/- .015 length tolerances on
certain equipment
Ability to handle up to 60,000#
coils
SUPERIOR FLATNESS FOR YOUR HOT
ROLLED, COLD ROLLED, HIGH
CARBON, STRIP STEEL & COATED
PRODUCTS
Shearing
Lean Manufacturing
Lapham-Hickey FABRICATION
Stretch Leveling
Stretch Leveling Capabilities:
•
•
•
•
•
Edge Conditioning
Edging Capabilities:
•
•
Gauge Range: .030-.250
Width Range: .375-6.00
Edge Types:
•
•
•
•
No. 3 Edge – SLIT
No. 4 Edge – ROUND
No. 5 Edge – Approximately
Square (No. 3 Edge Deburred)
No. 6 Edge - SQUARE
Maximum Coil Width 72”
Maximum Coil Thickness
.625”
Minimum Coil Thickness
.070”
Maximum Coil Weights
60,000#
Maximum Length 20’0” in
stacker mode, 40’0” in slideout mode
Laser Cutting
Lapham-Hickey offers both C02 & Fiber
Laser Technology:
• 79” X 157” Tables
• Edge Detection Tolerance: +/- .020
• 6000 watts of laser power
• Maximum work-piece weight:
3485 lbs.
• Aluminum: .625”, Stainless: 1.00”, Carbon: 1.250”
Plasma
Plasma Tables & Capabilities
• MG Titan Plasma Tables
• 2 HT 2000 Conventional Plasma, 2 HD 3070 High Definition Plasma, 2
HPR260 Plasma
• 20 Gauge to 1.50”
• Tolerance: +/- .030
• Table Size: 192 X 480
Oxy Burning
Oxy Fuel Specifications
• 14” max plate clearance
• 8 or 12 oxygen fuel torches
• 20’ X 41’ tables
Machine Thickness Acceptable
• .375” to 14” mild steel (.375”MIN recommended)
ID Capabilities
• 1.5 times the material thickness
Forming
Press Brake/Forming Specifications
• Capacity – 500 tons
• Distance between frames – 168”
• Bed Length – 192”
• Ram Stroke – 10”, Ram Open Height – 21”, Back Gauge – 60”
Oscillating
Oscillating Capabilities:
•
•
•
Gauge Range: .010”-.250”
Slit Width Range: .250”-2”
Slit Tolerances as tight as +/.003
We can meet a variety of
specifications on welds, face, ID/OD
and coil weights
Crane Capabilities
Under Hook Dimension:
• 26’2” Maximum
• Two Cranes; both rated 20 ton
lifting capacity
• Welding Capabilities:
All welding staff is certified to the AWS
D1.1 Specification. We Offer:
• MID Welding – Mild Steel and
Aluminum
• TIG Welding – Stainless Steel and Aluminum
• Subarc Welding – Heavy Plate thickness, Max Penetration, Long runs of weld
• Robotic Welding
Shot
Blasting
Size Capabilities
• 72” Wide, 4” High, No Min or
Max Length Limit
• Max Weight Limit: 60#’s per square foot, 100# max per pc
• Max Size Part: 30” wide, Min size part: 2X2
• Max Height of part: 18” to 24” tall
Features
• 320 Grit to blast all four sides
Available Finishes
• Dry as blasted, coasted with
water soluble rust inhibitor
Sawing
Cold Saw Capabilities
• Round bar 2.750”-9”, Square bar 2.750”-6”, Flat 4.133” X 5.25”
• Offers a teach program where we can cut rectangles -2.750”-7.0”
• Cutoff tolerance: +/-.015 on parts under 120”, +/-.030” on parts over 120”
• Square Tolerance: +/-.001 per inch of diameter on bar, .0015 per
inch of diameter on tube
• Guaranteed surface finish: 160
Band Saw
• 20”X20” cutting capacity
• Tolerance:+/- .040 on straight/90 Degree cuts, need to have +/-.060 on angle
• 0-60 degree angle cutting
Blanchard Grinding Capabilities
• 14” Height
• 84” Swing
• 73” Magnet
• +/- .005 Flat & Parallel
Other Services
Stress Relieving, Machining, Pickling
& Oiling, Painting, Ultrasonic Testing
OVER 90 YEARS OF EXCELLENCE
LOCATIONS
www.lapham-hickey.com
Chicago, Illinois (HEADQUARTERS)
5500 West 73rd Street
Chicago, IL. 60638
Email: [email protected]
Phone: 708-496-6111
Toll Free: 800-323-8443
Fax: 708-496-8504
Oshkosh, Wisconsin
Lapham-Hickey Sales
Phone: 920-233-8502
2050 S. Oakwood Road
Toll Free: 800-236-8855
Oshkosh, WI. 54904
Fax: 920-233-5670
Email: [email protected]
The Lapham-Hickey Steel heritage dates back to
1926 when four partners; Frank Hickey, Edward and
Burnham Lapham (brothers) and George Clifford,
purchased the Chicago mill depot of the Fitzsimmons
Cold Drawn Bar Company of Youngstown, Ohio.
The four partners each brought their own knowledge
and expertise: Frank Hickey brought his experience
working at the Wisconsin Steel Division of
International Harvester with a background in bar
products.
Lapham-Hickey Operations Lapham-Hickey Steel
2585 W. 20th Avenue
PO Box 2483
Oshkosh, WI. 54904
Oshkosh, WI. 54903
Little Canada, Minnesota
3250 Spruce Street
Little Canada, MN. 55117
Phone: 651-688-8138
Toll Free: 888-799-5021
Fax: 651-681-5778
Email: [email protected]
Columbus, Ohio
753 Marion Road
Columbus, OH. 43207
The Lapham brothers; employed by the Edgar T.
Ward Company in Chicago, brought a real
understanding of the flat rolled business. The final
piece of the puzzle was George Clifford, who
provided additional investment capital needed to
acquire the Fitzsimmons Bar Chicago depot.
It didn’t take long for the four partners to see the
opportunities in diversifying from just distribution of
steel into the processing of the steel.
A TRUSTED
LEADER IN THE
METALS
INDUSTRY
SINCE 1926
LAPHAM-HICKEY STEEL CORPORATION
Phone: 614-443-4881
Toll Free: 800-326-0327
Fax: 614-443-6371
Your partner in production
Email: [email protected]
CHICAGO
Madison, IL.
Saint Louis Division
Phone: 618-451-1100
11 Caine Drive
Toll Free: 800-3250734
Madison, IL. 62060
Fax: 618-451-1109
Email: [email protected]
Pawcatuck, Connecticut
28 Hickey Drive
Pawcatuck, CT. 06379
Email: [email protected]
Philadelphia, Pennsylvania
Industrial Spring Steel Incorporated
2625 North Salmon Street
Philadelphia, PA. 19125
Email: [email protected]
Phone: 215-426-7000
Fax: 215-426-7003
OSHKOSH
LITTLE CANADA
Phone: 860-599-1600
Toll Free: 800-556-7620
Fax: 860-599-3220
COLUMBUS
ST.LOUIS/MADISON
PAWCATUCK
PHILADELPHIA