2013 Tri5 Catalog - Classic Industries

Transcription

Power Steering
PS140
1955-57 Small Block Power Steering Pump Set
PS6000
Replacement power steering pump set for 1955-57 models with small block engines.
Replaces the factory power steering pump and generator assembly when upgrading
to an alternator. Fits small block with front mounts, short water pump and small
balancer. Includes remanufactured pump with new reservoir and cap, new pulleys,
brackets belts and hardware. Compatible with original style power steering, 605
steering boxes and rack and pinion conversions.
A6113
TF500124
OE style and replacement power steering pumps for models with small and big
block engines. Thoroughly reconditioned, these pumps are carefully inspected and
remanufactured to provide years of trouble-free service. Reservoirs may differ in
appearance than the original, but all pumps will fit and function like the originals.
NO CORE CHARGE REQUIRED!
74.99 ea
54.99 ea
49.99 ea
49.99 ea
Note: Includes reservoir.
I
Steering, Suspension, Rear End & Brakes
Small Block Engines
A6113
short water pump .............................................................
A6154
long water pump ..............................................................
Big Block Engines
A6113
short water pump .............................................................
A6151
long water pump ..............................................................
179.99 ea
179.99 ea
1955-57
3905366
Note: Cap, nut and pulley are not included. Outlet port fitting may not be included on all
pumps. Re-use old fitting if necessary.
Replacement Style Power Steering Pumps
Power Steering Pump With Reservoir
PS6086
V8
short water pump.................................................
PS6000
V8
long water pump .................................................
Power Steering Pump Without Reservoir
PS142
V8
short water pump.................................................
PS140
V8
long water pump .................................................
OE Style Power Steering Pumps
OS1
Note: Shipped oversize.
Remanufactured Power Steering Pumps
small block w/short water pump.................... 459.99 set
3959558
Small Block Power Steering Brackets
Reproduction power steering pump cradle and adjuster brackets for models with
small block engines. Manufactured to OE specifications for original fit and finish.
Choose from brackets for engines with short or long water pump.
Adjuster Brackets
3905366
short water pump ............................................................... 29.99 ea
3959558
long water pump ................................................................ 31.99 ea
Cradle Brackets
C411141
327 w/short water pump .................................................... 39.99 ea
KW799B
all w/long water pump ....................................................... 29.99 ea
179.99 ea
179.99 ea
Small Block Power Steering Bracket Set
These power steering brackets are designed for the later power steering pump on
engines that have the motor mounts on the side of the block. These are great for
a power steering conversion or when installing an alternator and your car has the
old style power steering. Set includes all mounting brackets for small block V8
engines with long water pump.
KW799
long water pump ................................................................ 69.99 set
PR6969SB
PR6969BB
PR6969SBC
Power Steering Reservoirs
Big Block Power Steering Bracket Set
Replace that dented, leaking or missing reservoir with a brand new reservoir.
Reservoirs include all o-rings & fittings necessary to install on your power steering
pump. When appearance is a concern, use these OE style black powder coated
reservoirs. Also available in chrome.
Black Powder Coat Finish
Small Block Engines
PR6372B
short water pump............................................................. 39.99 ea
PR6969SB
long water pump ............................................................. 39.99 ea
Big Block Engines
PR6969BB long water pump ............................................................. 39.99 ea
Chrome Finish
Small Block Engines
PR6372C
short water pump............................................................. 49.99 ea
PR6969SBC long water pump ............................................................. 49.99 ea
Big Block Engines
PR6969BBC long water pump ............................................................. 49.99 ea
A complete set of big block power steering brackets. Includes all three brackets
needed to replace or add a new power steering pump.
K1020
big block with long water pump ........................................ 59.95 set
206
1955-57 Power Steering Pump Bracket Set
Reproduction power steering pump bracket set for 1955-57 models with front motor
mounts. Utilizes existing holes in the block. Functions best when the generator or
alternator is in the stock location. For both short or long water pumps.
TF500291 1955-57 small block....................................................... 44.99 set
Power Steering Pumps . Pump Brackets
Toll Free Order Line 800.854.1280
Power Steering Components
TF500000
TF500001
TF500002
1955-57 Power Steering Return Hose
Replacement hose set for power steering gear boxes.
Includes clamps, steering flare-fitting box tube and hose.
TF500019 1955-57 ................................ 19.99 ea
1955-57 Power Steering Hose Set
Complete replacement power steering hose set for
1955-57 models with original style power steering.
This complete 4 piece set includes the high pressure
hose, low pressure hose and 2 control valve hoses with
correct fittings and in correct lengths.
TF500018 1955-57 .............................. 109.99 set
1955-57 Power Steering
Control Valve to Cylinder Hose Set
Reproduction control valve to the power steering
cylinder hose set for 1955-57 models. Each set
includes two hoses.
TF500016 1955-57 ................................ 49.99 set
1955-57 Steering Shaft Couplers
When rebuilding or modifying your steering system, it
is often necessary to replace the worn factory steering
shaft coupler or rag joint. These replacement joints are
designed with a 500 series box in mind and feature
3/4"-30 splines to mount to the box. The 1955-57 tilt
column joints have either a 3/4"-36 splined or 1" DD
for aftermarket tilt columns.
Original Column
TF500000 1955-57 original column .. 69.99 ea
Aftermarket Tilt Column
TF500001 1955-57 3/4"-36 output .... 69.99 ea
TF500002 1955-57 1" DD output ...... 69.99 ea
C82581
TF500132
1955-57 Power Steering Hose Frame Bracket
This bracket retains power steering hoses and keeps
them from touching exhaust manifolds. Includes
mounting hardware.
TF500020 1955-57 ................................ 12.99 ea
T9257
Power Steering Pump Caps
These quality aftermarket caps fit perfectly on original
and reproduction power steering pump reservoirs.
Add a chrome cap cover for a mild custom look in
your engine bay.
C82581 1955-57 black cap.................. 4.99 ea
T9257
1955-57 chrome cap cover .... 4.99 ea
TF500133
1955-57 Power Steering Hose Grommet
Keeps power steering hoses in place within the frame
bracket. Use with part TF500020 power steering hose
grommet frame bracket.
TF300257 1955-57 ................................ 3.99 ea
Get the race-winning
experience of Joe Gibbs
under your hood with Joe
Gibbs power steering fluid.
This specially formulated
fully-synthetic power stering
fluid avoids foaming at
high temperatures to create
superior cooling properties.
The higher thermal stability
also offers less pressure
drop.
JG1306 PS fluid quart....................... 19.99 ea
JG1307 PS fluid case of 12 quarts .... 239.99 cs
TF500134
1955-57 Power Steering Hoses
Reproduction power steering hose sets for original style
power steering valve on 1955-57 Chevrolet models.
Manufactured with CNC bent tubing, the pressure hose
and tube swivel for custom positioning. Configurations
available to connect an OEM generator-mounted or late
model pump to either the original or replacement valve.
Each includes high pressure hose and low pressure hose.
Instructions included.
Note: *Use with TF500005 steering assist kit.
Original Pump to Replacement Valve
TF500132* 1955-57 .............................. 104.99 pr
Late Model Pump to Replacement Valve
TF500133 1955-57 .............................. 109.99 pr
Late Model Pump to Original Valve
TF500134 1955-57 .............................. 109.99 pr
Steering Rag Joints
Royal Purple Max EZ Power Steering Fluid
Replacement steering rag joints and couplers that install
into the lower steering shaft area. Rag joints often wear
out from years of use and exposure to engine heat. We
have many different sizes and configurations available,
so be sure to check yours before ordering.
SC1010 3⁄4"-36 spline x 3⁄4"-30 .......... 109.99 ea
SC1011 3⁄4"-36 spline x 3⁄4"-36 .......... 109.99 ea
SC1012 3⁄4"-36 spline x 13⁄16"-36 ...... 109.99 ea
SC1068 3⁄4"-36 spline x 3⁄4"DD ......... 109.99 ea
SC1005 3⁄4"-36 spline x 1" DD ........... 109.99 ea
SC1001 3⁄4"-30 spline x 1"-48............. 109.99 ea
SC1002 3⁄4"-36 spline x 1"-48............. 109.99 ea
SC1003 13⁄16"-36 spline x 1"-48 .......... 109.99 ea
SC1007 3⁄4" DD x 3⁄4"-30 ................... 109.99 ea
SC1009 3⁄4" DD x 13⁄16"-36 ............... 109.99 ea
SC1004 3⁄4"-30 x spline 1" DD ........... 109.99 ea
SC1006 13⁄16"-36 spline x 1" DD ....... 109.99 ea
Max EZ is an advanced
power steering fluid designed
to maximize the life and
performance of all power steering
units. Max EZ is formulated
with a blend of select synthetic
base oils plus Royal Purple’s
proprietary Synerlec additive
technology, which is proven
to make equipment run cooler,
smoother, longer, quieter and
more efficiently. Max EZ is
compatible and can be mixed with
conventional power steering fluids
and has excellent seal compatibility.
RP01326 12 oz. bottle ............................
5.99 ea
RP12326 case of 12 - 12 oz. bottles ......... 64.99 cs
207
Steering, Suspension, Rear End & Brakes I
Joe Gibbs Driven®
Power Steering Fluid
1955-57 Power Steering Slave Cylinder
Original style replacement power steering slave
cylinder for 1955-57 models. A much needed and
sought after part for your original power steering
system.
A0722 1955-57 .................................. 169.99 ea
8050050
1955-57 Power Steering Drag Link Adapter
Steering Box To Frame Mounting Bolt Set
Reproduction steering box to frame mounting bolt set
for 1955-57 models. Includes three 3/8"-24 x 3-3/4"
bolts with correct carriage bolt head and three nuts
and lock washers.
This adapter screws onto the end of the drag link in
place of factory power steering control valve. Allows
for simple conversion from factory power steering to
500, 600 or 605 Series power steering boxes. Works
with factory pitman arm. Needed for original power
assist vehicle.
TF500292 1955-57 ............................. 74.99 ea
1955-57 Power Rack and Pinion Shaft Sets
Note: For use on original & 605 steering boxes only.
TF500006
1955-57 ................................
5.99 set
TF500014
TF500012
TF500013
1955-57 Power Steering Heat Shields
I
These reproduction heat shields for 1955-57 Chevrolet
models extend the life of your power steering
components by protecting them from the damaging
effects of engine heat.
Short Heat Shield - Mounts to Exhaust Pipe
TF500012 1955-57 .............................. 39.99 ea
Long Heat Shield - Mounts on Crossover Pipe
TF500013 1955-57 V8 single exhaust . 39.99 ea
8050060
TF500015
Steering Connecting Rod Dust Shield
This dust cover mounts on the center link where the
pitman arm ball connects. Designed to keep pitman arm
ball socket clean and lubricated, each shield includes
gasket. Will fit any model with original style manual
or power steering.
Manual Steering
TF500014 1955-57 ................................ 5.99 ea
Power Steering
TF500015 1955-57 ................................ 9.99 ea
These sets are designed to work with the power steering
rack and pinion conversion and are available for the stock
steering column or an aftermarket steering column. For
models with small block engines with header clearance.
The set for the stock column includes two stainless
u-joints; one already welded to the long section of the
smooth shaft and a second u-joint to finish the installation
after the shaft is cut to the proper length. Set includes
instructions for modifying steering column and included
bearing placement. The other set is for 1"DD x 3/4"-36
aftermarket steering columns. Set includes: stainless
u-joints, shaft column adaptors and instructions.
8050050 1955-57 original column ....... 209.99 set
8050060 1955-57 aftermarket column . 179.99 set
Pitman Arm Puller
This pitman arm puller will
make replacing the pitman arm
easy. Specifically designed to
pull pitman arms from most cars
and trucks.
Y41900 .................................................. 26.99 ea
1955-1957 Steering Column Bearing
TF500008
TF500003
TF500004
500 Series Steering Boxes
All 500 Series power steering boxes are the key
components to a high performance modern style power
steering system. An open centered, rotary type valve
provides smooth operation throughout the steering
range while retaining excellent road feel. The late
model internal steering components are like having
rack and pinion steering in a compact, easy to replace
steering box! This unit has a one piece housing, which
eliminates the need for an additional conversion
mounting bracket and is an easy replacement for the
factory manual steering box or the outdated 605 power
steering box. This box works with factory pitman arm,
use inverted flare hoses (Pressure fitting is 7/16" tube
(11/16"-18 inverted flare); Return fitting is 3/8" tube
(5/8"-18 inverted flare) ), and uses 3/4"-30 splined
steering coupler. Steering ratio is 14:1. Available
painted black or finished in chrome.
TF500003 1955-57 black ................ 449.99 ea
TF500004 1955-57 chrome ............. 1079.99 ea
208
Power Steering Rebuild Kit
These rebuilt kits each contain all necessary hardware
to rebuild your power steering system.
TF500008 1955-57 control valve........... 15.99 set
TF500009 1955-57 cylinder .................. 15.99 set
TF500010 1955-57 cylinder mounting .. 11.99 set
TF500011 1955-57 pump ...................... 11.99 set
This steering column bearing
is included in the rack and
pinion shaft sets for original
columns. When fabricating
your own rack and pinion
setup (big block applications,
for example), this bearing is
needed to convert an original
column.
8020490 1955-57 original .................... 29.99 ea
1955-57 Replacement Power Steering Valve Set
This power steering valve set includes all parts to replace an original power steering valve with a late model
version. This bolt-on set requires no modification of original parts and can be converted back to an original
valve at any time.
TF500135
1955-57 ...................................................................................................................... 449.99 set
8014001
1955-57 Power Rack & Pinion Kit
1955-57 Power Steering Conversion Set
This conversion set is for those who want power steering as well as originality. Every
part is new, not remanufactured, and needs no modification. For 1960 and newer
small block engines with alternator and harmonic balancer with bolt-on pulleys
(OEM balancer has riveted pulleys, preventing the installation of an additional
pulley to drive the power steering pump). Pump brackets incorporate the OEM
front engine mount. Instructions included.
TF500185
OS1
1955-57 ........................................................................... 1329.99 set
Power rack and pinion steering set for 1955-57 models. Available with black or
chrome finish, this set includes a Saginaw rack and pinion with bracket customized
for a direct fit. The new bracket bolts to the factory steering mounting points and
places the steering linkage on the same plane as the stock unit. Set also includes
outer tie rod ends, brackets, mounting hardware, new steering arms and -6AN banjo
line fittings for an easy installation. Features a 16mm double-D steering shaft and
2.65 turns lock to lock.
Important: Original column modification required. Cannot retain column shift with original
columns. Big block applications require customer to supply their own shaft and u-joints and
may require custom headers.
OS1
8014001
8014002
1955-57
1955-57
black............................................................... 859.99 set
chrome ........................................................... 969.99 set
TF500285
FR1610
1955-57 Power Steering Assist Set
Note: The adjustable control valve is a new later style adjustable valve.
TF500005
1955-57
power assist set .............................................. 849.99 set
1955-57 Rack and Pinion w/Tilt Steering Column
Flaming River has engineered popular rack and pinion cradle systems for the 195557 Chevy. This system replaces the early long shaft steering box with an optional
new tilt column. This fixture welded cradle mounts between the frame rails and
bolts into the original location. Mounting the rack on the cradle system not only
reinforces the chassis, but also increases ground clearance. Requires no suspension
modification and installs easily with hand tools. All mounting hardware, pump,
bracket, reservoir and universal joints are included.
Important: Power steering hoses sold separately.
Note: Shipped double oversize. Discount exempt.
TF500091
1955-57 500 Series Power Steering Sets
The 500 Series power steering boxes are key components to a high performance
modern style power steering system. An open centered, rotary type valve provides
smooth operation throughout the steering range while retaining excellent road
feel. The late model internal steering components are like having rack and pinion
steering in a compact, easy to replace steering box! The steering box has a one piece
housing, which eliminates the need for an additional conversion mounting bracket
and is an easy replacement for the factory manual steering box or the outdated 605
power steering box. This box works with the factory pitman arm, uses inverted
flare hoses (pressure fitting is 7/16" tube - 11/16"-18 inverted flare; return fitting is
3/8" tube - 5/8"-18 inverted flare) and uses 3/4"-30 splined steering coupler. Sets
include: 500 Series steering box, power steering pump, pump mounting brackets
and power steering hoses. Comes finished in black.
TF500091 1955-57 with front motor mounts ................................ 739.99 set
TF500092 1955-57 with side motor mounts ................................. 739.99 set
Floor Shift
Manual steering
TF500275 1955-56 w/paintable column......................................
TF500276 1955-56 w/polished column.......................................
TF500279 1957
w/paintable column......................................
TF500280 1957
w/polished column.......................................
Power steering
TF500281 1957
TF500282 1957
Rack and Pinion Hose Set
FR1610
1955-57 .....................................................................
Column Shift
Manual steering
TF500287 1957
TF500288 1957
Power steering
TF500289 1957
w/paintble column .......................................
TF500290 1957
Rack and Pinion Hose Set
FR1610
1955-57 .....................................................................
OS2
1144.99
1399.99
1144.99
1304.99
set
set
set
set
1649.99
1849.99
1754.99
1964.99
set
set
set
set
199.99 set
1504.99
1669.99
1444.99
1589.99
set
set
set
set
1909.99
2079.99
1909.99
2079.99
set
set
set
set
199.99 set
209
This set works with all power steering pumps including the OEM style generatormounted pump. Includes center drag link with an adjustable control valve assist
cylinder, pitman arm, idler arm, bolts, hoses, bracket and extra hardware.
Steering/Suspension Parts
Sway Bar Bushing
F Pitman Arm
E Idler Arm
Sway Bar Bracket
D Center Drag Link
A Outer Tie
Rod Ends
A Outer Tie Rods
B Inner Tie Rods
C Tie Rod Adjusting Sleeve
Stabilizer
Link Kit
H Upper Control
Arm Bushing
H Lower Control
Arm Bushing
C Tie Rod Adjusting Sleeve
G Upper Control
Arm Ball Joint
Lower Control™ Arm
Upper Control Arm
Lower Control
Arm Bumper
A - Outer Tie Rods
ES234RL
1955-57
RH or LH ........................................................ 29.99 ea
I
B - Inner Tie Rods
ES577
ES577
ES578
1955-57
1955-57
1955-57
manual steering - RH/LH ............................... 29.99 ea
power steering - RH........................................ 29.99 ea
power steering - LH ........................................ 79.99 ea
Idler Arm Bushings
K8826
K377
1955-57
1955-57
1955-57
TF500080
TF500029
1955-57
1955-57
manual steering - LH/RH ............................... 21.99 ea
power steering - RH........................................ 21.99 ea
power steering - LH ........................................ 29.99 ea
D - Center Drag Links
manual steering ............................................... 89.99 ea
original power steering ................................... 134.99 ea
E - Idler Arm Assemblies
TF500030
TF500031
1955-57
1955-57
power steering................................................. 59.99 ea
1955-57
1955-57
idler arm bushing ............................................ 14.99 ea
idler arm bushing - center link bushing .......... 9.99 ea
F - Pitman Arms
TF500033
TF500034
C - Tie Rod Adjusting Sleeves
ES577S
ES577S
TF500027
G Lower Control
Arm Ball Joint
1955-57
1955-57
power steering................................................. 49.99 ea
G - Control Arm Ball Joints
10203
TF500035
1955-57
1955-57
upper
lower
2 required ......................................... 19.95 ea
2 required ......................................... 24.99 ea
Control Arm Shaft Sets
14794
14795
1955-57
1955-57
upper
lower
1 required per vehicle....................... 79.99 set
1 required per vehicle....................... 79.99 set
H - Control Arm Bushings
12162
12163
1955-57
1955-57
upper
lower
4 required .........................................
4 required .........................................
5.95 ea
6.99 ea
1955-57 Steering Linkage Set
1955-57 Forged Steering Arms
This steering linkage set provides maximum performance and handling when
upgrading to a power steering box. Compatible with 500 Series, 605 and 670
conversions. Includes pitman arm, idler arm, and center link.
TF500081 1955-57 ............................................................................. 184.99 set
Reproduction forged steering arms for 1955-57 models. Designed to perform just
like the originals with an authentic appearance. Compatible with modular drop
spindles. Black powder coated finish.
TF500082 1955-57 .............................................................................. 69.99 pr
210
Steering/Suspension Components
Steering/Suspension Parts
TF500025
TF500023
1955-57 Front End Rebuild Sets
These front end rebuild sets will improve the ride and handling of your classic Chevy by replacing your worn out
bushings, ball joints and tie rod ends. Available in rubber or polyurethane, these front end kits make it possible
to achieve better-than-new performance at a modest price. Sway bar end links and bushing sold separately.
Note: Complete sets not compatible with original power steering.
Basic Kits Include:
2
2
2
4
4
2
2
Complete Hyper-Flex System Master Set
Complete Kits Include:
Upper Ball Joints
Lower Ball Joints
Outer Tie Rod Ends
Upper Control Arm Bushings
Lower Control Arm Bushings
Upper Control Arm Bumpers
Lower Control Arm Bumpers
2
2
2
4
4
2
2
2
2
2
Upper Ball Joints
Lower Ball Joints
Outer Tie Rod Ends
Upper Control Arm Bushings
Lower Control Arm Bushings
Upper Control Arm Bumpers
Lower Control Arm Bumpers
Inner Tie Rod Ends
Tie Rod Adjusting Sleeves
Idler Arm Bushings
Standard Rubber Sets
TF500022 1955-57 basic ..............................................................................................................
TF500023 1955-57 complete........................................................................................................
Polyplus Polyurethane Sets
TF500024 1955-57 basic ..............................................................................................................
TF500025 1955-57 complete........................................................................................................
Stiffer bushings help maintain proper alignment
throughout the full range of suspension travel,
increasing handling control, brake control and reduces
wheel hop on acceleration through better suspension
stability. The complete HYPER-FLEX SYSTEM
Master Set includes front control arm bushings, front
end link set, rear leaf spring bushings, body mounts
and tie rod end boots. Available in black or red.
318121G 1955-57 black ..................... 215.99 set
318121R 1955-57 red ........................ 215.99 set
239.99 set
319.99 set
259.99 set
359.99 set
TF500017
TF500102
1955-57 Ball Joint Boots
TR103107
1955-57 Chevy Front Suspension Rebuild Set
These rebuild sets replace worn front suspension parts with all new components to restore the handling of your
Chevy and reduce front tire wear. Each set includes upper and lower ball joints, inner and outer tie rod ends with
tie rod adjusting sleeves, and upper and lower control arm bushings.
Note: Inner tie rods are not included with the power steering set.
TR103107
TR103108
1955-57
1955-57
manual steering ............................................................................................. 249.99 set
power steering............................................................................................... 229.99 set
913101G
1955-57 Tie Rod End Dust Boots
Replace your tie rod end boots with these reproductions
to keep your tie rod ends contaminant-free.
913101G 1955-57 black ...................... 4.99 pr
913101R 1955-57 red ......................... 4.99 pr
TF500085
1955-57 Idler Arm Mounting Bolt Set
Reproduction idler arm mounting bolt set for 195557 models. Includes two bolts, two nuts and two lock
washers.
Note: For use on original & 605 steering boxes only.
TF500036 1955-57 ..................................
6.99 set
Polyurethane Control Arm Bushing Set
This front end control arm bushing set maintains precise
alignment while cornering, accelerating, and braking.
Polyurethane bushings are more firm than the original
soft rubber to stand up to hard driving.
33108G 1955-57 black ........................ 70.99 set
33108R 1955-57 red ............................ 70.99 set
Custom Aluminum Tie Rod Sleeves
These aluminum tie rod sleeves add a unique, custom
look to your suspension. Made from 6061 T6 aluminum,
and available in clear anodized, black and polished
finishes. Jam nuts are included.
TF500083 1955-57 clear anodized ....... 69.99 pr
TF500084 1955-57 black ...................... 69.99 pr
TF500085 1955-57 polished ................. 69.99 pr
Suspension Rebuild Components
211
Reproduction ball joint boots for 1955-57 models.
These boots seal and protect your ball joints from
harmful dirt and debris.
TF500017 1955-57 upper ..................... 3.99 ea
TF500102 1955-57 lower ..................... 3.99 ea
Steering/Suspension
1955-57 Forged Hub Roller Bearing Kit
1955-57 Modular 2" Drop Spindles
1955-57 Disc Brake 2" Drop Spindles
This 2" drop spindle set is compatible with most
aftermarket single-piston disc brake kits. Each set of
2" drop spindles includes caliper mounting brackets to
allow use of full size GM brake calipers. These spindles
use stock steering arms and also correct bump steer
issues common to other drop spindles. Sold as a pair.
Note: For vehicles with disc brakes only. Not compatible
with drum brakes.
A24801
1955-57 .............................. 359.99 pr
These are the strongest drop spindles on the market,
featuring forged construction and chrome moly CNC
machined pins. Compatible with factory ball joints and
stock steering arms, making them ideal when using
a rack and pinion conversion. The modular design of
the drop spindle also allows a variety of brake options,
from off the shelf rotor and calipers to big brake kits
such as Wilwood and Baer Brakes.
These new roller bearing forged aluminum hubs are
stronger and safer than any other hub currently on the
market. Features new studs, installed bearing races, and
weighs 2 pounds less than the factory hubs. Ideal for disc
conversions that require original hubs. Includes 2 hubs
with studs, bearings, seals and spindle nut hardware.
TF500086 1955-57 .............................. 199.99 set
Note: Will not clear original 14" wheel due to caliper
clearance. Not for use with drum brakes.
TF500087
1955-57 .............................. 249.99 pr
WB67
I
1955-57 Front Wheel Bearings and Seals
1955-57 Cast 2" Drop Spindles
These one piece spindles allow you to lower vehicle
ride height 2" without altering steering geometry or
suspension travel. This eliminates the need for bolt-on
caliper brackets. Cast from the highest quality ductile
iron with chrome moly CNC machined pins, these are
compatible with factory ball joints and tie rod ends.
Fits most 14" wheels and will allow use of 1979-81
Malibu rotors and 1982-93 S-10 calipers.
TF500042 1955-57 .............................. 179.99 pr
1955-57 Modular Drop Spindle Brackets
Disc brake brackets designed to fit Modular 2" drop
spindles. All brackets are designed to fit 1979-81
Malibu rotors and either 1979-81 Malibu calipers or
large GM calipers.
Use with Malibu Rotors and Calipers
TF500088 1955-57 .............................. 99.99 pr
Use with Malibu Rotors and Large GM Calipers
TF500089 1955-57 .............................. 79.99 pr
Premium replacement front wheel bearings and seals
for 1955-57 models. Replace your worn out original
wheel bearings to maintain proper alignment and
smooth rolling. Check bearings whenever the brake
drum is removed. When replacing or repacking your
bearings, always replace the seal.
Outer Bearing
WB41
1955
2 required ................ 69.99 ea
WB67
1956-57 2 required ................ 14.99 ea
Inner Bearing
B40
1955-57 2 required ................ 74.99 ea
Front Wheel Seal
W5458 1955-57 2 required ................ 29.99 ea
TF500126
1955-57 Grease Caps
Replacement grease caps for 1955-57 models. Replace
worn or dented grease caps and make that restoration
look even better. Sold in pairs.
TF500126 1955...................................... 24.99 pr
TF500127 1956-57 ................................ 24.99 pr
TF500222
1955-57 Heidt’s 2" Drop Spindles
2" Drop Spindles For 12" Rotors
These 2" drop spindles are ideal if you already use 15"
or 16" wheels and want to upgrade to larger diameter
brakes. Designed for 1970-78 Camaro calipers or
equivalent and 1988-92 Camaro 1LE 12" rotors,
bearings and seals.
TF500090 1955-57 .............................. 189.99 pr
212
These steel drop spindles reduce vehicle ride height
by 2" without altering steering geometry or requiring
realignment. The caliper brackets allow a wide variety
of brake options. For GM rotors and calipers, use
1979-81 G-body rotors. Compatible with stock and
Heidt's control arms.
Note: Discount exempt.
Use with 1969-72 GM Cast Iron Calipers
TF500222 1955-57 .............................. 349.99 pr
Use with 1978-84 GM Metric Calipers
TF500223 1955-57 .............................. 339.99 pr
Steering Knuckles . Wheel Bearings
Pickle Fork Set
This fork set is designed to separate ball joints, tie
rods, pitman arms and other suspension items that are
difficult to separate. 5 piece tool set.
Y41500 .................................................. 46.99 set
Steering/Suspension
TF500205
TF500078
1955-57 Totally Tubular Control Arm Set
These tubular control arms are a huge improvement
over the original design. The front lower control arms
have a helical stamped spring mount to secure the coil
spring. The lower shock mount is incorporated into the
stamped coil plate, which is welded around its entire
perimeter to rugged 1-1/2" 120 DOM tubing. The
upper control arms are pre-assembled with new billet
chromoly 4130 cross shafts and pivot sleeves designed
to capture both sides of the bushing for added safety.
Available in black or silver powder coated finish.
Upper & Lower Control Arm Set
TF500078 1955-57 black ................. 979.99 set
TF500079 1955-57 silver ................. 979.99 set
Upper Control Arms
TF500201 1955-57 black ................. 379.99 pr
TF500203 1955-57 silver ................. 379.99 pr
Lower Control Arms
TF500202 1955-57 black ................. 509.99 pr
TF500204 1955-57 silver ................. 509.99 pr
1955-57 Ball Joint Caps
These Heidt’s ball joint caps add a unique, custom look
to your suspension. Manufactured from high quality
aluminum and polished to a brilliant finish. For use
with Heidt's tubular control arms only.
TF500157
1955-57 .............................. 181.99 set
99154G
1955-57 Control Arm Bumpers
Polyurethane upper and lower control arm bumpers
for 1955-57 models add a more firm feeling to your
suspension.
TF500205 1955-57 upper - black ......... 12.99 pr
99154G
1955-57 lower - black ......... 19.99 pr
99154R
1955-57 lower - red ............. 19.99 pr
1955-57 Upper Control Arm Shaft Set
Replacement upper control arm shaft set for 1955-57
models. These upper shafts include polyurethane
bushings, washers and retainer bolts and provide 2
degrees of extra caster. One set required per vehicle.
14794P
1955-57 .............................. 99.99 set
1955-57 Front Coil Springs
TF500154
1955-57 Heidt’s Tubular Upper Control Arms
Standard Track Width
TF500147 1955-57 plain steel ............. 394.99
TF500149 1955-57 polished stainless . 734.99
Narrowed Track Width
TF500148 1955-57 plain steel ............. 394.99
TF500150 1955-57 polished stainless . 734.99
1955-57 Lower Control Arm Shaft Set
Replacement lower control arm shaft set for 1955-57
models. These lower shafts include polyurethane
bushings, washers and retainer bolts. One set required
per vehicle.
14795P
1955-57 .............................. 99.99 set
pr
pr
pr
pr
Heidt’s Tubular Lower Control Arms
Heidt’s tubular lower control arms for 1955-57 models.
Available with standard or 1-1/2"-narrowed track
width, each control arm is TIG-welded and comes fully
assembled and ready to install. Ball joints, bushings
and hardware are included. Available for standard
shocks and springs or coil-over shocks. Choose from
plain steel or polished stainless steel finish.
1955-57 Upper Control Arm Bumper
Reproduction upper control arm bumper for 1955-57
models. Manufactured in rubber as original.
TF500038 1955-57 upper ..................... 5.39 ea
Control Arms for Shocks & Springs
TF500151 1955-57 plain steel ........... 714.99 pr
TF500154 1955-57 polished stainless 1349.99 pr
Control Arms for Coil-Over Shocks
TF500152 1955-57 plain steel ........... 714.99 pr
Narrowed Track Width
TF500153 1955-57 plain steel ........... 714.99 pr
Heidt’s 1” Lowering Front Coil Springs
Heidt’s 1" lowering springs for 1955-57 models. Give
your Chevy the look you want by lowering it 1" with
these springs alone, or combine with Heidt’s 2" drop
spindles to safely and easily lower your Chevy 3".
TF500113 1955-57 1" drop.................. 99.99 pr
1-1/2" Lowering Front Coil Springs
1955-57 Lower Control Arm Bumper
Reproduction lower control arm bumper for 1955-57
models. Manufactured in rubber as original.
TF500039 1955-57 lower ..................... 7.99 ea
1-1/2" lowering springs for 1955-57 models. The
easiest way to lower your Chevy in the front is by
installing lowering springs.
TF500041 1955-57 small block ........... 104.99 pr
TF500047 1955-57 big block............... 104.99 pr
Control Arms . Coil Springs
213
Heidt’s tubular upper control arms for 1955-57 models
are available with standard or 1-1/2"-narrowed track
width. Each control arm is TIG-welded and comes fully
assembled and ready to install. Ball joints, bushings
and hardware are included. Available in plain steel
or polished stainless steel finishes. All upper control
arms offer 6º of additional caster.
Reproduction coil springs for 1955-57 models. Each
spring is designed to fit exactly as original and features
the correct spring rate.
2-Door Sedan & Hardtop Models
6 Cylinder
CS656 1955
w/o air...................... 69.99 pr
CS638 1955
w/o Powerglide........ 79.99 pr
8 Cylinder
CS638 1955
CS638 1955-57 w/o air...................... 79.99 pr
CS656 1956-57 all ............................. 69.99 pr
Convertible Models
CS638 1955
w/Powerglide........... 79.99 pr
CS656 1955
CS656 1956-57 w/o air...................... 69.99 pr
CS638 1956-57 w/o Powerglide........ 79.99 pr
4-Door Sedan & Hardtop Models
6 Cylinder
CS638 1955
CS656 1956-57 all ............................. 69.99 pr
8 Cylinder
CS656 1956-57 all ............................. 69.99 pr
Wagon Models
CS656 1955
Sway Bar Components
After
Before
Anti-Sway Bars And Your Car
Sway bars tie your suspension together to help with body roll when cornering.
When turning, the car will “roll” as it transfers its weight to the outside wheels.
This causes the front end to “plow” or understeer. An aftermarket sway bar will help
keep your car and the load even and assists in steering response. Sway bars come
complete with everything required for installation. The diagram above illustrates
the expected effect of installing an upgraded sway bar.
HW5822
1955-57 Hellwig Sway Bar Sets
Control the body roll of your 1955-57 Chevy with a set of high performance sway
bars from Hellwig. Manufactured in 4140 chromoly steel. Each sway bar comes
complete with polyurethane sway bar bushings and mounting hardware. Pocket kit
sets move springs inboard increasing the roll stiffness of the suspension 25%. Easy
bolt on installation with basic hand tools (some drilling may be required). Choose
from solid bars for strength or tubular bars for weight savings.
Note: Each set includes all new hardware. Shipped oversize.
TF500190
1955-57 Original Style Performance Front Sway Bars
These performance front sway bars are reproductions of a rare factory accessory
offered over the parts counter by Chevrolet as part of NASCAR homologation
requirements. Manufactured from high carbon steel, hardened and stress-relieved,
and feature gold iridite/zinc chromate plating on all parts. Includes instructions
and correct hardware. Compatible with disc brake conversions as well as Heidts
control arms. Available as a reproduction 3/4" bar or an original style 1" heavy duty
upgrade. Made in the USA.
OS1
solid
tubular
1-1/4" diameter .............................. 244.99 set
1-1/4" diameter .............................. 184.99 set
solid
tubular
1" diameter .................................... 259.99 set
1" diameter .................................... 239.99 set
solid
tubular
1" diameter .................................... 224.99 set
1" diameter .................................... 244.99 set
OS1
TF500190
TF500191
Front
HW5722
1955-57
HW55721 1955-57
Rear
HW5822
1955-57
HW55822 1955-57
Rear for Pocket Kits
HW8296
1955-57
HW58296 1955-57
1955-57
1955-57
3/4" bar .......................................................... 209.99 set
1" bar ............................................................. 229.99 set
I
95106
1955-57 ADDCO Sway Bar Sets
RSB673
These ADDCO Sway bars reduce understeer, loss of traction, and body roll by
linking both sides of the suspension together for flatter cornering and lighter steering.
Includes all bushings and brackets for installation.
OS1
FSB157
RSB673
1955-57
1955-57
7⁄8" front ........................................................ 144.99 set
3⁄4" rear.......................................................... 174.99 set
1955-57 Polyurethane Sway Bar Bushings & Bracket Set
Performance polyurethane sway bar bushings make your sway bar system much more
effective. By reducing suspension deflection, it’s almost like a higher performance
anti-sway bar! These bushing and bracket sets replace the short lived original rubber.
Sets available in black or red to suit your tastes.
Black Sway Bar Bushings & Brackets
95106
1955-57 3/4" diameter ................................................... 19.99 set
95108
1955-57 7/8" diameter ................................................... 19.99 set
Red Sway Bar Bushings & Brackets
95106R
1955-57 3/4" diameter ................................................... 19.99 set
95108R
1955-57 7/8" diameter ................................................... 19.99 set
H22105F
1955-57 Hotchkis Sway Bars
Dramatically improve the cornering performance and traction of your 1955-57
Chevy with the Hotchkis Sport Suspension Sway Bar Package. This performance
sway bar package offers fine tunable rear roll stiffness previously unavailable for
1955-57 models. Cars with wider rear tires and high horsepower engines will benefit
greatly from the stability of this package. Each set includes TIG welded end-links
with easy to lubricate polyurethane bushings, premium mounting hardware including
stainless steel u-bolts, laser cut axle mounts, polyurethane bushings, grade 8 bolts
and gloss black powder coat finish for durability. Made in the USA.
Important: Minor frame drilling required for rear sway bar installation.
Note: Shipped oversize. Discount exempt.
H22105
H22105F
H22105R
214
1955-57
1955-57
1955-57
OS1
front and rear ................................................. 619.99 set
front only ....................................................... 299.99 ea
rear only ......................................................... 339.99 ea
Anti-Sway Bars
Front Sway Bar End Links
Rubber Sway Bar Bushings
Reproduction sway bar bushings for
1955-57 models. Manufactured in
rubber as original.
TF500040 1955-57 ............ 9.99 pr
Front end links include 3/8" diameter
grade 5 bolts, nylon insert locknuts,
heavy duty washers, high performance
bushings and heavy wall tubing spacers.
Choice of polyurethane or rubber
bushings.
Rubber
K6217PR 1955-57 .......... 17.99 kit
Polyurethane
98117G
1955-57 black . 19.99 set
98117R
1955-57 red ..... 19.99 set
Shock Absorbers
KG4550
5801
Monroe Sensa-Trac Shock Absorbers
KG5522
KYB Gas-A-Just Shocks
TF500142
KYB’s Gas-a-Just shocks are designed to deliver
maximum driving control and performance. The higher
pressure of the Gas-a-Just keeps tires glued to the
road while its high strength, monotube configuration
provides extra-rugged durability and fade-free
performance. For a high performance ride, order a
set of Gas-a-Just Shocks.
Front
KG4550 1955-57 all.......................... 49.99 ea
Rear
KG5522 1955-57 all.......................... 49.99 ea
TF500145
Monroe Sensa-Trac shocks and struts feature groove
tube technology, which utilizes precision tapered
grooves that allow fluid to flow freely around the
piston, creating a smoother ride under a wide range
of driving conditions. During emergency maneuvers
or braking, the piston travels beyond the grooves,
firming up the ride for added safety and control when
it is needed most.
5801
1955-57
front ....................... 29.99 ea
5803
1955-57
rear ......................... 29.99 ea
BN45292
Bilstein Shocks
LW40121
LW40301
QA17888
QA1 Pro Coil-Over Shock System
Important: Must use spanner wrench and thrust bearing set
when installing coil over shocks.
Note: Shipped oversize. Discount exempt.
OS1
Single Adjustable Shocks
TF500142 1955-57 small block ......... 449.99
TF500143 1955-57 big block ............. 449.99
Double Adjustable Shocks
TF500144 1955-57 small block ......... 619.99
TF500145 1955-57 big block ............. 619.99
Spanner Wrench and Thrust Bearing Set
QA17888 1955-57 ............................ 54.99
kit
kit
kit
kit
set
KY343127
KY343149
KYB GR-2 Gas Shocks
KYB’s GR-2 series is specially designed to deliver
a smooth, comfortable ride. A patented check valve
minimizes foaming and aeration to make sure the ride
stays smooth, even under rough conditions.
Front Shocks
KY343127 1955-57
all...................... 29.99 ea
Rear Shocks
KY343149 1955-57
all...................... 29.99 ea
1955-57 Lakewood Drag Shocks
Lakewood drag shocks feature state-of-the-art 10
stage valve design which provides excellent starting
line reaction and stable high speed operation, superior
to any other shock on the market today. These shocks
feature multiple valve stages; as the vehicles speed
increases, the characteristics of the shock change.
All Lakewood drag shocks will mount in the stock
location without modification.
90/10 Series Front - Race Only
Will let the front end rise quickly to provide as much
weight transfer as possible to the rear wheels on initial
launch. Works best on vehicles where maximum rear
wheel traction is required.
Important: Race shocks are not designed for street use.
70/30 Series Front - Street & Strip
Used for overall improved handling on the strip or
when quick front end lift is not needed. Works best on
medium to high horsepower vehicles with wide tires
and low to medium horsepower vehicles with slicks.
This is the perfect shock for vehicles that are driven
both on the street and on the strip.
50/50 Series Rear - Street & Strip
Used to properly load the rear wheels and prevent
over-reaction and wheel hop. This shock is the best
overall choice for vehicles that are driven both on
the street and the strip. Use with leaf or coil springs.
LW40101 1955-57 front 90/10 Series .... 64.99 ea
LW40121 1955-57 front 70/30 Series .... 59.99 ea
LW40301 1955-57 rear 50/50 Series ...... 59.99 ea
S32066
Monroe-Matic Plus Shock Absorbers
OER® Original Hue Paints
Monro-Matic Plus shock absorbers are nitrogen gas
charged and feature velocity sensitive valving and all
weather fluid, which offers passenger cars improved
comfort at an economical price.
S32066 1955-57 front ....................... 19.99 ea
S33049 1955-57 rear ........................ 19.99 ea
OER® Original Hue paints are specifically formulated
to match the finish of OEM Delco shock absorbers
exactly, however it can be applied to a variety of parts.
Note: Ships ground only. No air shipment.
GM Delco Shock Absorber Gray
K89532 16 oz. can ................................. 16.99 ea
Shock Absorbers
215
Coil-over shocks are the most tunable suspension you
can use, and we offer the best from QA1. Billet shock
bodies with a 5/8" chrome steel rod and silver powder
coated springs in different spring rates are the ticket.
These shocks are fully adjustable with just a turn
of a knob in both compression and rebound for full
performance tuning. Ride height is also tunable with
adjustment rings. A spanner wrench and replacement
adjustor ring thrust bearings are available separately.
Bilstein’s shock bodies are precision formed through a
unique seamless extrusion process for superior strength
along with high finish tolerances. The finished body
is then mated with a solid, induction hardened steel,
chrome plated and polished shaft, machined valving
components and highest quality seals. With extreme
attention to detail, Bilstein provides you with the
closest thing to a hand built shock available today.
Conventional shocks slowly lose efficiency and
eventually fail over a period of time causing excessive
tire and suspension wear. Bilstein Gas Pressure Shock
Absorbers are the least expensive way to dramatically
improve the ride, handling and control of your vehicle.
With Bilstein’s limited lifetime warranty, you may
never have to purchase shock absorbers again. Bilstein
shocks fit sedan and wagon models, including Nomad.
Front
BN45292 1955-57 ................................ 99.99 ea
Rear
BN3502
1955-57 ................................ 99.99 ea
Morrision’s GT Chassis Handles Curves Like a Sports Car!
Replace the 50-Year Old Chassis with a GT Sport Chassis Package!
Out With the Old...
“Glide Ride” Front & Rear Suspension
The original suspension was described by
Chevrolet as “super-flexible” even when
new. Now it’s just sloppy.
“Jumbo-Drum” Front & Rear Brakes
Front and rear drums with bonded
linings were standard for 1955-57
vehicles.
I
Adjustable Coil-Over Suspension
Tubular steel control arms and
Strange Engineering adjustable
coil-over shocks make your front
suspension tunable to your personal
preference. A triangulated 4-bar rear
suspension with Strange adjustable
coil-over shocks keep the Ford 9"
rear axle assembly in place.
Front and Rear Brake Package
Wilwood front and rear disc
brakes with 11" vented rotors
brings your 1955-57 to a stop
quickly and without incident.
In With the New!
Caster has been increased from 2º to 5º for added stability at
high speeds and better weight distribution under cornering.
Camber has been enhanced through the first four inches of
suspension travel. The angle of the control arm also helps to
increase stability under hard braking.
Bumpsteer is a minimal issue with the GT Sport chassis. Even
on uneven pavement, the vehicle with track straight!
Roll Center is improved throughout body roll, resulting in
consistent, stable and predictable vehicle handling.
GT Sport Chassis with Suspension and Axle Housing
Ride Height is approximately 3 inches lower than stock ride
height. Combined with the 115" wheelbase and 2" x 4" mandrelbent rectangular tube frame, the GT Sport chassis stays incredibly
mild-mannered.
Complete GT Sport Chassis
The Art Morrison GT Sport Chassis with suspension and axle housing includes a
front suspension consisting of uncoated upper and lower control arms, spindles,
Strange adjustable shocks and springs, power rack and pinion and a 1" sway bar.
Out back, a Ford 9" housing is held in place by a triangulated 4-link suspension with
Strange adjustable shocks and springs. Roll control is provided by a 3/4" sway bar.
The complete Art Morrison GT Sport Chassis includes everything that the chassis
with suspension and axle housing includes plus more! Includes Wilwood front and
rear brakes with Wilwood 11" vented rotors, nodular-iron center section with your
choice of 3.50:1, 3.70:1, 3.89:1, 4.11:1, 4.30:1 or 4.56:1 gear ratio, positraction
and 31-spline axles put power to the ground. It also includes a transmission cross
member for chassis rigidity.
Note: Art Morrison chassis are special order and must be prepaid. Shipped truck freight.
Discount exempt.
Note: Art Morrison chassis are special order and must be prepaid. Shipped truck freight.
Discount exempt.
2 Door & 4 Door Sedan Models
TF500400 1955-56 ........................................................................ 11,844.99
TF500403 1957 ............................................................................. 11,844.99
2 Door Hardtop & Convertible Models
TF500401 1955-56 ........................................................................ 11,844.99
TF500404 1957 ............................................................................. 11,844.99
2 Door and 4 Door Station Wagon, Nomad & Sedan Delivery Models
TF500402 1955-56 ........................................................................ 11,844.99
TF500405 1957 ............................................................................. 11,844.99
216
Morrison GT Sport Chassis
ea
ea
ea
ea
ea
ea
2 Door & 4 Door Sedan Models
TF500500 1955-56 ........................................................................ 14,999.99
TF500503 1957 ............................................................................. 14,999.99
2 Door Hardtop & Convertible Models
TF500501 1955-56 ........................................................................ 14,999.99
TF500504 1957 ............................................................................. 14,999.99
2 Door and 4 Door Station Wagon, Nomad & Sedan Delivery Models
TF500502 1955-56 ........................................................................ 14,999.99
TF500505 1957 ............................................................................. 14,999.99
ea
ea
ea
ea
ea
ea
Accessories for Art Morrison GT Sport Chassis
SLALOM COURSE
BRAKING
DRAG STRIP
AM555831
1955-57 LS Engine Mounts
AM555833
Art Morrison GT Chassis Header Sets
These headers feature heavy-gauge tubing and thick
3/8" flanges for durability and ball-style collectors
for leak-free connection. Includes header bolts and
gaskets. Available in raw steel or with ceramic-metallic
coating. Made in the USA.
This mounting package for LS engines incorporates
Energy Suspension polyurethane bushings, and adapter
plate with a positive stop, and OEM-style Chevy
mounts. Easy to use and very secure. Made in the USA.
Note: These LS engine mounts will only install on the GT
Sport chassis. Special order, must be prepaid. Discount
exempt.
AM325557
........................................ 224.99 set
GT Sport Chassis Master Cylinder Adapter
GT Sport Chassis Brake Line Set
Complete chassis brake line set for the GT Sport
chassis. F1ormed in stainless steel with stainless fittings
for long-term reliability. Use in conjunction with the
master cylinder adapter and line sets. Made in the USA.
Note: Special order, must be prepaid. Shipped oversize.
OS1
Discount exempt.
AM555840
This adapter allows you to mount a
tandem-style dual reservoir master
cylinder to the firewall of your
1955-57 model. Also allows you use
the stock pedal assembly and OEM
ratio. Made in the USA.
........................................ 644.99 set
AM555861
Note: Special order, must be prepaid.
Discount exempt.
AM555811
........................................
1955-57 Polyurethane Body Mounts
14.99 set
AM555865
GT Sport Chassis Master Cylinder Line Set
Steering Linkage
Brake line conversion set allows the use of a tandem,
dual-reservoir master cylinder with the GT Sport
chassis. These lines provide the link between the master
cylinder and the lines on the chassis. Made in the USA.
This set contains the components needed to connect the
power rack to the steering column. Available in bare
metal or polished stainless steel. Made in the USA.
Note: Special order, must be prepaid. Discount exempt.
AM555856
........................................
79.99 set
34120R
AM555861
AM555865
bare metal ....................... 199.99 ea
polished stainless steel.... 339.99 ea
These urethane body mounts are stiffer and more
durable than rubber, reduce body flex, and are ideal
for racing and aggressive driving conditions.
Sedan Models
34106R 1955-57 red ......................... 74.99 set
34106G 1955-57 black ..................... 74.99 set
Convertible Models
34119R 1955-57 red ......................... 74.99 set
34119G 1955-57 black ..................... 74.99 set
2-Door Hardtop Models
34120R 1955-57 red ......................... 74.99 set
34120G 1955-57 black ..................... 74.99 set
Morrison GT Sport Accessories
217
624.99 pr
999.99 pr
624.99 pr
999.99 pr
This “catch can” eliminates the pesky leaks that 9"
Ford housings are known for. Excess pressurized gear
oil goes to the tank, is vented, and drains back after
parking the car. Made in the USA.
Housing Breather Vent for Hose Breather
AM404020 ............................................. 15.99 ea
Housing Breather Vent Tank
AM404030 ............................................. 45.99 ea
OS1
624.99 pr
999.99 pr
AM404030
Housing Breather Kit
Note: Special order. Shipped oversize. Discount exempt.
Small Block Headers
1-3/4" Primaries with 3" Collectors
AM555831
raw steel ..........................
AM555831C ceramic-metallic coated ..
Big Block Headers
2" Primaries with 3" Collectors
AM555835
raw steel ..........................
AM555835C ceramic-metallic coated ..
LS1 Headers
1-3/4" Primaries with 3" Collectors
AM555833
w/O2 sensor bungs ..........
AM555833C w/O2 sensor bungs ..........
AM404020
Handle the Fast Lane with a Fatman Pro-Touring Chassis!
Make Your 55-57 Chevy Ride and Handle Like a Modern Car!
Pro-Link Adjustable
4-Link Suspension
Ford 9" with
3.70:1 gear set
.0188" Mandrel-Bent
Rectangular Tubing
Space for Big Tube Headers
Polished Stainless
Control Arms & Fasteners
11" disc brakes
I
Body Mounts Installed
11" disc brakes
Includes QA1
coil-over shocks!
Frame shown with
optional Wilwood brakes
Construction begins with 0.188"-wall 3" x 4" and 3" x 3"
mandrel-bent rectangular tubing with a superior cross member
design.
Body Mounting points are installed in the original
locations. Original-style or polyurethane body mount bushings
can be used. Radiator mounting brackets are also included.
Small and Big Block
Engine Mounts Installed
Ride Height is approximately 3-5 inches lower than original
with factory style spindles, which are included.
Coated in a black or gray lacquer primer in preparation for
finish painting.
Dampened by QA1 adjustable billet coil-over shocks.
Exhaust systems of up to 3" are accommodated through the
loops integrated into the frame.
Rear Axle consists of a Ford 9" with a 3.70 posi gear set,
28-spline axles, located via a Pro-Link 4-link suspension.
Narrowed 1" from stock to provide extra tire clearance.
Includes polished stainless steel control arms, power rack and
pinion steering, 4-wheel disc brakes front and rear sway bars.
1955-57 Fatman Pro-Touring G-Tech Chassis
Important: Some modifications are required for clearance of the rear upper coil-over and
After 27 years of street rod and race car chassis engineering, Fatman Fabrication has
sway bar mounts. Wagon models require modification to the spare tire well. Non-wagon
perfected the G-tech Chassis. Starting with fixture welded rectangular tubing, they
models require modification to the trunk floor. An aftermarket fuel tank is required. Bumper
add a mandrel bent rear kick-up and a unique X member with a fully encapsulated
bracket holes are not drilled for custom mounting solutions. Front and rear axles have a 5 x
center section. Each chassis includes front and rear suspensions featuring adjustable
4-1/2" bolt pattern.
sway bars, polyurethane bushings, and 4-wheel disc brakes. The Ford 9" rear comes
Note: Special order, must be prepaid. Price includes mandatory $80 pallet charge. Expect
complete, 28-spline axles, seals, and bearings. This surprisingly affordable chassis
4-6 weeks for delivery. Drop shipped truck freight. Discount exempt.
is built to suit your dreams.
TF555720 1955-57
Fatman G-Tech chassis ................................................................................................................................................................... 13,944.99 ea
218
Fatman G-Tech Chassis
Woody's Hot Rodz Lets You Set Your Own Performance
Nose Up or Nose Down, Give Your Chevy the Stance You Desire!
"Gasser"
TIG-welded full-perimeter frame
Each frame includes stock bumper mount
holes pre-drilled and accepts center
block motor mounts and transmission
cross member.
Ford 9" Housing
Rear axle housing mounted to inboard
leaf springs. Includes 31-spline axles
and wheel studs with 5 x 4-3/4" bolt
pattern. Center section not included.
Installation
Each frame installs without
modification to the body mounts
or floor pans. Heavy duty rear
shock bar is integrated into the
frame and still allows the use of
the stock fuel tank.
Choose your Level of Performance!
Motor and transmission mounts are sold
separately to accommodate the drivetrain
of your choice. Ford 9" center section and
rear brakes not included, allowing you
to use the gear ratios and brakes of your
choice.
Return your 1955-57 Chevy to its Gasser Roots!
Gassers Feature:
Cruisers Feature:
"Gasser" Straight Front Axle featuring a parallel leaf
spring design with semi-elliptical springs, spindles, kingpins,
steering arms, tie rods and all necessary hardware.
Front Suspension uses 1967-69 Camaro stamped
steel control arms, disc brakes, steering box, and steering
components.
Front Disc Brakes consisting of new rotors with GM
metric style calipers.
Upgrade to any aftermarket first generation Camaro control
arm, spindle, disc brake, steering, or exhaust components.
This "Gasser" chassis from Woody's hot rod brings your 1955-57 Chevy back to
the early days of hot rodding and lets you set your own level of performance. The
full perimeter frame bolts to any body style, including wagon and convertible. If
you are building a gasser, this chassis is the blank slate you need.
Important: Brake and fuel lines not included.
Note: Special order. Price includes mandatory $500 crate charge.
Shipped truck freight. Discount exempt.
TF555701
Make Your 1955-57 a Sleek, Aggressive Cruiser!
1955-57
....................................................................... 8499.99 ea
The cruiser chassis is for those that want the look and feel of a 1955-57 Chevy hot
rod without the need for an all-out performance chassis. The frame bolts to any 195557 Chevrolet body and uses 1967-69 Camaro front end and exhaust components,
making your options for upgrading nearly unlimited.
Important: Brake and fuel lines not included.
Note: Special order. Price includes mandatory $500 crate charge.
Shipped truck freight. Discount exempt.
TF555702
1955-57
.................................................................... 10,499.99 ea
Woody's Hot Rods Chassis
219
"Cruiser"
Air Suspension Systems
Choose From 3 Different System Levels
Level 1 System
Level 2 System
Level 3 System
Level 1 is an entry level air suspension
system designed for the enthusiast
on a budget that wants to upgrade
the vehicle and gain the advantage of
riding on air. Includes a front system,
a rear system with fixed valve Impact
Forged, Monotube Shockwaves and a
compressor system.
Level 2 allows more tuning than Level
1 with an upgrade of a single adjustable
Impact Forged, Monotube Shockwaves
and Strong Arm front kit, 4-Link AirBAR
system, and the enhanced RidePro e3
compressor/control system.
The level 3 Street Challenge suspension
package is for the discerning 1955-57
Chevy owner who is after heart stopping
cornering power, a cool lower stance,
and a civilized ride quality. No cutting
of the floor pan, no fabrication and no
compromise in performance!
System Components
I
The SHOCKWAVE is a top quality front air spring
system that is a bolt-on unit that requires no welding.
All ShockWave systems have either fixed, single or
triple adjustable shock valving to allow tuning of the
ride quality and handling performance of your vehicle
for a perfect, custom ride every time!
After all of the time and effort invested in your ride, it
doesn't make sense to let stamped control arms detract
from all that hard work. Finish your suspension with
these new tubular control arm systems from RideTech.
Built with all of the care and experience you have come
to expect, these tubular control arms are a precision
engineered solution for ShockWave® installation, as well
as ball joint binding and frame clearance issues that can
haunt some vehicles. When you combine the performance
benefits with the elegant design of these arms, there is no question; you need
these StrongArms™. These control arms are optimized to allow proper camber
adjustment at your new lowered ride height without using a large stack of shims.
All StrongArms™ include ball joints, and bushings and are ready to install!
The AirBAR is a 4 link rear air suspension that
will directly bolt into the OE leaf spring mounts
of your vehicle. Installation is bolt-on with
some minor welding required. It eliminates
the OE leaf springs and replaces them with a 4
link rear suspension. The 4 link bars offer more
precise positioning of the rear axle to eliminate flexing and increase stability.
The airpod with LevelPRO is a completely
integrated air compressor/controller
system that is the most advanced system
available today. It includes the controller,
air pressure sensors and 4-way ride height
sensors. Its compact size eliminates hours
of installation time.
220
Ridetech Suspension Systems
The RidePRO e3 represents a leap
forward in onboard suspension
controls, starting with a completely
new control panel that is sleek
and bright. The auto-dimming
transflective LCD display is
completely visible even in sunlight
and is only 3/8" thick. Interface
buttons are backlit and have a distinct "click" to let the driver feel when he
has made a change. Two mini USB connections are offered to allow a variety
of panel mounting and connection options. The electronic control unit (ECU)
is faster than ever and offers more options to refine your air suspension. In
addition to 3 ride height presets and the "ride height on start" feature, the
calibration process, weight compensation, and crossload compensation are now
all automatic. If a problem should arise, error detection and troubleshooting
menus have been added into the unit to help find and fix problems. The high tech
electronic RidePro e3 control system can use only air pressure sensors to control
ride height presets Includes the RidePro e3 control panel and waterproof ECU,
air valves, 3 gallon aluminum tank, compressor, harnesses, air lines and fittings.
LevelPro e3 systems add the extra
functionality of ride height sensors
to the proven RidePro e3 system to
provide the most accurate, and hassle
free control over ride height. Ride height
sensors allow the system to compensate
for load variations and automatically
adjust pressure to always maintain
accurate ride height presets. The right
choice for tow vehicles and cars that see
various load configurations or the person
that wants to “set-it and forget-it”.
The MUSCLEbar sway bars were
developed specifically for lowered
vehicles and will greatly enhance
the cornering performance of your
vehicle. Increased bar diameters,
polyurethane bushings, and
appropriate attachment links all add up to a sway bar package that is designed
to work correctly with your lowered vehicle and aggressive driving style. The
POSI Links improve range of motion and eliminate binding. The strong design
prevents deformation and failure and adds positive transfer of motion through
the sway bar.
Air Suspension Systems
11020199
11030399
1955-57 Level 3 AirRide Set
11030199
Note: Shipped overweight. Discount exempt.
11020199
11030199
1955-57
1955-57
Level 1 one piece frame............................ 3499.99 set
Level 1 two piece frame ........................... 3499.99 set
11020399
11030399
1955-57 Level 3 one piece frame ............................... 8549.99 set
1955-57 Level 3 two piece frame ............................... 8549.99 set
11020109
11020299
This is the mid-level AirRide set for 1955-57 Chevrolet passenger car models.
Includes single adjustable impact forged, Monotube Shockwaves, the AirBar 4 Link,
front upper & lower StrongArms and RidePro e3 control system.
11020299
11030299
1955-57
1955-57
Level 2
Level 2
one piece frame.......................... 5799.99 set
two piece frame ......................... 5799.99 set
1955-57 Complete Coil-Over System
For those who want a complete bolt-on coil-over system; RideTech offers a complete
bolt-on coil-over suspension system. Includes non-adjustable coil-over RideTech
aluminum bodied mono-tube shocks, upper and lower StrongArms, and the AirBar
4-link assembly.
11020109
11030109
1955-57
1955-57
one piece frame............................................. 3449.99 set
two piece frame ............................................ 3449.99 set
Ridetech Suspension Systems
221
This is the entry-level AirRide set for 1955-57 Chevrolet passenger car models.
Includes fixed valve impact forged, monotube Shockwaves that use the original
control arms, the AirBar 4-link assembly, and a RidePro analog control system, 3
gallon tank with a single compressor.
This is the Level 3, Street Challenge AirRide set for 1955-57 Chevrolet passenger
models. Includes Triple Adjustable, Impact Forged Monotube Shockwaves with
upper and lower StrongArms, front MuscleBar sway bar, 2" dropped spindles,
billet tie rod adjusters, the AirBar 4-link assembly, and LevelPro e3 with remote
controls and height sensors. This system is designed to put your 1955-57 Chevy
right along side any of the modern day performance cars that you care to show
your driving prowess.
Rear Suspension
1955-57 Heidt’s Triangular 4-Link Rear Suspension
Heidt's 1955-57 triangulated 4-Link kit handles serious horsepower, does not need a
panhard rod, and requires no cutting or floor modification. Bars are fully adjustable,
1-1/4" x .156-wall tube with 3/4" stainless adjusters and urethane bushings. Includes
chassis and axle brackets, adjustable links, full upper coil-over cross member,
adjustable coil-over shocks, springs, and all hardware. Adjustable 4-link mounts
allow suspension tuning. Can be outfitted with a Ford 9" axle housing, and 31-spline
axles with a 5 x 4-3/4" bolt circle. Available with unfinished or polished stainless
steel suspension links.
TF500136
1955-57 Custom Tubular Rear Shock Crossmembers
These rear shock crossmembers eliminate the risk of shocks pulling through trunk
sheet metal and causing body damage. Includes tubular shock crossmember, frame
brackets, and mounting hardware. Seamed and seamless frames available.
Important: Intended for both stock or aftermarket frames. Only coil-over shocks and springs
are painted. 9" Ford axle housings include Big Ford new style flanges and a 2.500" brake
offset. Suspension system delivered unassembled.
Note: Bushing style (eyelet) to clear the tight upper area under the floor of the wagons. Can
be used on the sedans, hardtops and convertibles. Works on seamed or seamless style frame.
Weld-On Crossmembers
TF500107 1955-57 seamed frame, 90° brackets ........................... 114.99
TF500129 1955-57 seamless frame ............................................... 119.99
TF500136 1955-57 Nomad, station wagon & sedan delivery. ...... 114.99
TF500131 1955-57 with coil-over shocks ..................................... 124.99
Bolt-On Crossmembers
TF500108 1955-57 seamed frame, 90° brackets cantered 3-5° ..... 114.99
TF500130 1955-57 seamless frame with angle cut ....................... 119.99
ea
ea
ea
ea
ea
ea
TF500173
TF500174
4-Link Coil-Over Suspension
TF500037
Unfinished Suspension Links
TF500162 1955-57 black coil-overs & springs ............................ 1194.99
Polished Stainless Steel Suspension Links
TF500164 1955-57 raw billet coil-overs w/chrome springs ........ 1864.99
TF500165 1955-57 polished billet coil-overs w/chrome springs . 1754.99
I
1955-57 Rear Shock Crossmembers
These universal rear shock crossmembers prevent shocks from pulling through the
trunk, causing body damage. Ideal for the builder on a budget. Works with seamed
or seamless frame. Includes shock crossmember and mounting hardware.
TF500037 1955-57 rear end standard.............................................. 41.99 ea
TF500128 1955-57 rear end narrowed ............................................ 41.99 ea
kit
kit
kit
kit
4-Link Coil-Over Suspension with Bare 9" Ford Axle Housing
Polished Stainless Steel Suspension Links
kit
kit
kit
kit
4-Link with Bare 9" Ford Axle Housing & 31 Spline Axles
Polished Stainless Steel 4 Suspension Links
Adjustable Spanner Wrench For Heidt’s Coil-Over Shocks
1955-57 Rear Leaf Springs
Over time, leaf springs can lose their strength and flatten. If you have original
springs, they probably need replacement. Available in 4 or 5 leaf configuration in
stock ride height or 1", 2" or 3" lower ride height. Replace your springs with a new
set engineered for each ride height and not bent. Your choice of Eaton brand, made
in the USA, or Standens brand, made in Canada.
Note: Shipped double oversize.
Eaton Springs
TF500250 1955-57
TF500251 1955-57
TF500252 1955-57
TF500253 1955-57
TF500260 1955-57
TF500261 1955-57
TF500262 1955-57
TF500263 1955-57
Standens Springs
TF500270 1955-57
TF500272 1955-57
TF500273 1955-57
222
kit
kit
kit
kit
Spanner wrench for adjusting the ride height on Heidt's coil-over shocks.
TF500174 ........................................................................................ 15.99 ea
OS2
4 leaf
4 leaf
4 leaf
4 leaf
5 leaf
5 leaf
5 leaf
5 leaf
stock height ....................................... 174.99
1" drop............................................... 209.99
2" drop............................................... 209.99
3" drop............................................... 209.99
stock height ....................................... 199.99
1" drop............................................... 229.99
2" drop............................................... 229.99
3" drop............................................... 229.99
5 leaf
5 leaf
5 leaf
stock height ....................................... 124.99 ea
2" drop............................................... 124.99 ea
3" drop............................................... 124.99 ea
Rear Suspension
ea
ea
ea
ea
ea
ea
ea
ea
TF500055
1955-57 Leaf Spring Shackle Set
Reproduction leaf spring shackles for 1955-57 models. Ideal replacement
commonly worn or damaged existing shackles. Each set does one spring.
TF500054 1955
LH or RH, 2 required....................................... 19.99
TF500055 1956-57 LH .................................................................... 19.99
TF500056 1956-57 RH.................................................................... 19.99
for
set
set
set
Rear Suspension
32119G
TF500138
1955-57 Rear Leaf Spring Bushing Set
Polyurethane bushings for rear leaf spring shackles.
These should be replaced when changing the rear
leaf spring or when you see that they are cracked or
pushed out.
32118G 1955
black ........................ 28.99 set
32118R 1955
red ............................ 28.99 set
32119G 1956-57 black ........................ 28.99 set
32119R 1956-57 red ............................ 28.99 set
1955-57 Traction Bars
1955-57 Rear Leaf Spring
Shock Plates with Shock Studs
Reproduction rear spring and shock anchor plates for
cars equipped with rear leaf springs. Sold in pairs.
TF500177 1955-57 ................................. 99.99 pr
Traction bar sets for 1955-57 models. Features
1-1/4" O.D. 4130 chromoly bars with 3/4" stainless
steel urethane bushed rod ends. Right and left hand
threaded rod ends allow adjustment and pre-loading of
suspension. TIG-welded throughout with bolt-on rear
brackets at spring mounts and weld-on front brackets.
Grade 8 hardware included. Brackets for stock location
and spring pocket kit included. Also available in a fully
bolt-on kit for use in stock location only. Finished in
raw metal, chrome or powdercoated black.
TF500050
1955-57 Rear Shackle Bushings
1955-57 Rear End Conversion Set
OEM style rubber bushings for rear leaf spring shackles.
Each 8 piece set does 2 springs.
Complete Set
TF500050 1955
8 piece.................. 14.99 set
TF500053 1956-57 8 piece.................. 17.99 set
Individual Bushings
TF500051 1955-57 short bushing ....... 2.49 ea
TF500052 1956-57 long bushing ........ 2.99 ea
This complete rear end conversion set allows the
original rear end to be changed to the more popular 1012 bolt or Ford 9". Set includes upper and lower shock
mounts, axle seats rear shock cross member u-bolts.
TF500178 1955-57 ............................... 169.99 set
Single Adjustable - Stock Location
TF500138 1955-57 raw metal.........
TF500138B 1955-57 black ................
TF500138C 1955-57 chrome.............
Single Adjustable - Spring Pocket Kit
TF500139 1955-57 raw metal.........
TF500139B 1955-57 black ................
TF500139C 1955-57 chrome.............
Fully Adjustable - Stock Location
TF500140 1955-57 raw metal.........
TF500140B 1955-57 black ................
TF500140C 1955-57 chrome.............
Fully Adjustable - Spring Pocket Kit
TF500141 1955-57 raw metal.........
TF500141B 1955-57 black ................
TF500141C 1955-57 chrome.............
OS1
339.99 set
389.99 set
429.99 set
319.99 set
379.99 set
429.99 set
419.99 set
469.99 set
539.99 set
409.99 set
459.99 set
519.99 set
Vehicle Scale
1955-57 Leaf Spring Relocation Kit
This kit mounts the leaf springs under the frame to
allow the use of wider rims and tires, resulting in
increased traction and improved looks. Includes front
spring pockets, axle seats, rear frame notches, and
spring shackles.
1955-57 Rear Axle Spring Bumper
Reproduction rear axle rubber bumper
for 1955-57 models. Manufactured to
factory specifications for originality.
Mounts on the axle housing. 2
required.
TF500125 1955-57 .................................
Note: Welding and frame cutting required. Does not include
leaf springs.
Note: Shipped overweight.
67650
vehicle scale ......................... 799.99 ea
TF500176 1955-57 ................................ 259.99 kit
OER® Metal Mimic FX Coatings
OER® Metal Mimic FX high
performance coatings provide
a “factory correct” looking
finish that is extremely durable
and amazingly close to the
original color. Metal Mimic
FX high performance coatings
are available individually or
buy the complete 6 can set of
coatings and save!
4.99 ea
TF500049
1955-57 Leaf Spring Liner Set
These pre-cut, pre-punched, full length plastic leaf
liners promote smooth, low friction spring operation.
These liners make the ride smooth and quiet.
TF500048 1955-57 4 leaf .................... 19.99 set
TF500049 1955-57 5 leaf .................... 19.99 set
TF500293 1955-57 6 leaf .................... 24.99 set
1955-57 Leaf Spring Relocation Kit
This kit centers the leaf springs with frame rails to
increase clearance for wider tires. Manufactured with
quality materials and tig welded throughout. Includes
all brackets, hardware, and exclusive Delrin bushings
for handling and long life. Made in the USA.
Note: Welding and frame cutting required. Does not include
leaf springs.
TF500137 1955-57 ................................ 359.99 kit
Note: Ships ground only. No air
shipment.
OER® Metal Mimic FX Coating Set
K89509 6 can set .................................... 75.99
OER® Metal Mimic FX Coatings - 16 oz. Cans
K89500 Aluminum Blast Coating ......... 12.99
K89502 Cast Iron Gray Coating, 250ºF . 12.99
K89503 Chrome Blast Coating .............. 14.99
K89501 Galv Blast Zinc Coating ........... 14.99
K89091 Stainless Steel Coating ............. 12.99
Rear Suspension
set
ea
ea
ea
ea
ea
223
1955-57 Leaf Spring U-Bolts
Reproduction OE-style U-bolts and nuts for rear leaf
springs from OER®. 2 pair required per axle.
RL7
1955-57 ................................. 19.99 pr
Measure the
weight of your
car with this
quality vehicle
scale. This
scale features
weight for each
wheel as well
as total weight.
Percentage weight is also available as well as front
and rear percentages. Each of the individual wheel
pad measures 14-1/2" x 9-1/2" x 2-1/2" with a 1250
lb capacity per pad for a total scale capacity of 5000
lbs. Accurate to 1/10 of 1%. 20' cables, durable
carrying case, back-lit display and batteries are
included.
Performance Rear Ends
Lock-Right Positive Locking Differentials
All-New Heavy Duty 9" Housing
3" O.D., 1/4" Wall Tubing
New Housing Ends Welded To Heavy-Wall Tubing
Custom Alloy Axles With Pressed Bearings
28, 31, 33 Or 35 Spline Axles
Spring or Arm Brackets Installed
9" Ford Bolt-In Housing & Axle Package
All Moser 9" Ford housings are made with new heavy duty housing cores, seamless
steel tubing (3" O.D., 1/4" wall), new brackets, new housing ends, and new bushings.
Bolt-in housing and axle packages include new housing, custom alloy axles (28,
31, 33, or 35 spline), ball bearings, up to 1/2" studs and heavy duty retainer plates.
Important: Original, factory-style brakes are not compatible with these housings. Aftermarket
rear drum or disc brake conversion is required.
OS2
Note: Special order, must be prepaid. Shipped double oversize. Discount exempt.
M12156
1955-57 ........................................................................... 1019.99 ea
If you’re looking for extreme traction,
Classic Industries® has got it all
locked up! These positive-locking
differentials are a breakthrough in
differential technology, delivering the
most traction possible while providing
full differential operation! The LockRightTM system offers a revolutionary
design that is exceptionally rugged and
yet ingeniously simple! Just replace
the existing spider gears with a pair
of Lock-RightTM driver and coupler
gears in your existing stock, open
differential assembly. Installs in 1-2
hours and best of all Lock-RightTM
doesn’t require extra modification
or set up since the ring and pinion
gears are unaffected. No special tools,
calibration equipment, or fixtures are
needed! Designed for fail safe operation and manufactured from high strength,
ultra-resilient, heat tempered steel alloys for maximum toughness. Prevents wheel
“spin-up", and delivers traction that puts the power down with smooth, silent
efficiency. Give your classic Chevrolet the extra performance edge you need at a
price that can’t be beat!
Important: Not for use with Positraction or Limited-Slip differentials, use in stock, open
differentials only.
1965-71
LR1940
LR1910
1972-75
LR1920
GM 10 bolt
GM 12 bolt
8.2" ring gear, 28 spline axle.................... 443.99 ea
8.875" ring gear, 30 spline axle................ 372.99 ea
GM 10 bolt
8.5" ring gear, 28 spline axle.................... 367.99 ea
High Performance Limited-Slip Differentials
I
1955-57 Moser 9" Ford Bolt-In Housing
Moser Engineering uses only the best materials when producing these 9" Housings
In competitive racing, you can’t leave anything to chance. The proper setup using
quality hi-performance parts is the only way to ensure that the time you spend
setting up your vehicle is not wasted. Why waste money on a new engine that
could power a rocket to the moon, then turn around and buy an old rusted-out rear
end that is probably going blow up in the water box? Doesn’t make much sense.
Our heavy-duty banjos are reinforced in critical stress-point areas, thickened up
considerably when compared to it’s OEM counterpart. New, seamless housing tube
is essential in assuring ultimate housing strength, which our 3" diameter tubing is
not only seamless, but also a 1/4" thick. We also use newly stamped high-strength
brackets that are considerably thicker than OEM. Each housing produced includes
newly forged housing ends.
Important: Original, factory-style brakes are not compatible with these housings. Aftermarket
rear drum or disc brake conversion is required.
Note: Special order, must be prepaid. Shipped double oversize. Discount exempt. OS2
M12154
1955-57 ............................................................................. 649.99 ea
Auburn Gear’s High Performance
Series limited-slip differentials
outperform standard OEM
differentials hands down. They
deliver more traction and faster
engagement for controlled power
transfer and lightning fast reaction
to changing load conditions. No
matter what your application,
the Auburn Gear limited-slip
differential is engineered to
provide smooth torque-sensing
operation with bias ratios to meet
your performance needs. This
superior performance is achieved
through an innovative cone clutch
design which transfers more
power to the high-traction wheel
for quick acceleration and tight
cornering. These units are also compatible with ABS and electronic controls.
Note: C-clip axles only.
8.2/8.4 10 Bolt drop out style
5420100 1955-64 3.70 & down - 17 spline axle ...........................
8.2" 10 Bolt w/25 Spline Pinion
5420108 1964-72 3.08 & up - 28 spline axle ................................
8-7/8" 12 Bolt
5420104 1965-72 4.10 & up - 30 spline axle, 4 series case ..........
5420106 1965-72 3.07-3.73 - 30 spline axle, 3 series case...........
514.99 ea
444.99 ea
444.99 ea
444.99 ea
Moser C-Clip Eliminators
These improved C-Clip Eliminators eliminates the factory C-clip axle retention and
provides a safety hub with sealed, press-on bearings. Now with an extra internal seal
to help prevent leakage. The C-Clip Eliminators are available for Moser factorytype axles with a 1.533" bearing seat. Machining instructions included for OEM
axles. These are for vehicles using Impala (1966-76) and Truck (thru 1976) 10 or
12 bolt axles only. Sold in pairs.
Moser Main Cap Stud Set
Note: Modification of Eliminator or Drive Studs may be necessary when using 5/8" studs.
Discount exempt.
This high-quality main cap stud set with nuts and washers reduces unwanted
movement inside the rear end and increases overall strength.
10 Bolt & 12 Bolt Chevrolet Impala (1966-76) and Truck (thru 1976) Axle Housing
M12153
with Moser axles & 1.533" bearing seat.......................... 164.99 pr
224
M12146
10 bolt & 12 bolt Chevrolet - set of 4 ............................... 29.99 set
Universal Driveshaft Safety Loop
M12144
M12145
Required and approved by all major racing sanctioning bodies. This universal
driveshaft safety loop is fully adjustable to fit most vehicles. The four piece design
is manufactured from 1/4" thick, 2" wide mild steel, bright zinc plated and comes
with all necessary hardware.
LW18000
all models
zinc plated................................................... 39.99 ea
Moser Performance Differential Covers
Strengthen your 10 or 12 bolt chevrolet rear axle with a Moser Performance Cover.
These covers are made of 356-T6 Aluminum and designed to resist twisting of
the axle housing and prevent premature gear wear. The cover weights only 6 lbs.
and comes with all necessary bolts, washers, and gaskets. Main cap stud sets are
available separately to strengthen the rear end even further.
10 Bolt Chevrolet Axle
M12144
w/8.5" & 8.2" ring gear ................................................... 179.99 ea
12 Bolt Chevrolet Axle
M12145
car axle............................................................................. 179.99 ea
T4786
T4787
Chrome Differential Cover
W6985
Prevent costly damage by replacing rear axle bearings before they seize! Premium
replacement rear axle bearings for use on all 1955-57 models. When removing
the rear drums, always check the bearings and seals for signs of wear. 2 required
per vehicle.
Rear Wheel Bearings
W507ER
1955-56 .............................................................................. 21.99 ea
W307R
1957 ................................................................................... 24.99 ea
Rear Wheel Seals
W6985
1955-56 .............................................................................. 12.99 ea
Seal Puller
This tool is great for pulling oil and grease seals. Convenient tool that comes in
handy when needed.
Y56750
........................................................................................... 9.99 ea
Bearing Race And Seal Driver
When installing bearing races, you’ll find this tool to be an excellent way of saving
time. Includes all components needed to install or remove bearing races.
Y12600
........................................................................................... 34.99 set
T4883
T4352
Differential Cover Gaskets
These high quality, extra thick differential cover gaskets are manufactured to provide
maximum sealing. Available for 10 bolt and 12 bolt rear ends.
T4883
10 bolt ..............................................................................
5.99 ea
T4352
12 bolt ..............................................................................
4.99 ea
Differential Cover Bolt Set
Special plated bolts to complete the installation of your chrome rear end cover.
Available for both 10 bolt and 12 bolt applications.
T9278
12 pieces .......................................................................... 10.99 set
1955-57 Rear Axle Filler Plug
Reproduction rear axle filler plug.
Features correct square head plug and
leather seal.
TF800154 1955-57 ......... 19.99 ea
1955-57 Universal Joints
Replacement driveshaft universal joint
for 1955-57 models. Features outside
snap rings. Includes caps and clips for
installation.
369 1955-57 front/rear .... 9.99 ea
225
These replacement rear end covers are manufactured with bright, triple chrome
plating and are designed to resemble the configuration of the original covers.
These high-quality rear end covers will add a unique, custom appearance to your
1955-57 Chevrolet passenger car model. Available for 10 bolt or 12 bolt rear ends.
Gaskets sold separately.
T4786
10 bolt .............................................................................. 24.99 ea
T4787
12 bolt .............................................................................. 24.99 ea
W507ER
1955-57 Rear Wheel Bearings and Seals
Front Disc Brake Sets
Three Different Rotor Finishes
Standard Finish
Basic finish from the factory.
Turbo Slotted and
Xtra Life Plated
The slots provide a space for heat and gas to escape, thus
improving braking performance. The slots also clean the
pads, removing any debris that might have accumulated.
Xtra Life plating adds protective finish layers to the entire
surface of the rotor, helping prevent the areas where the
pads do not come into contact with the rotor from rusting
and corroding.
Big Bite Cross Drilled, Turbo Slotted and
Xtra Life Plated
Cross-drilling adds cooling capacity to the rotors.
Big Bite Finish
Big Bite rotors provide
maximum stopping power, a
cooler operating temperature
and eliminate brake fade!
2-Piston Standard Height Front Disc Brake Conversion Sets
Two-piston front disc brake conversion sets for 195557 models with disc or drum front brakes. Sets
include standard height spindles, 11.25" x .9375"
unidirectional rotors with 5 x 4.75" bolt pattern and
43mm 2-piston aluminum calipers. Choose from the
standard slotted and plated rotors or the optional Big
Bite slotted, drilled and plated rotors. Also choose
from standard clear anodized calipers or optional
black or red powdercoated calipers.
Note: 15" minimum wheel size. Shipped overweight.
I
A12924
1-Piston Standard Height Front Disc Brake Conversion Sets
One piston front disc brake conversion sets for 1955-57 models with disc or drum
front brakes. Sets includes standard height spindles, 11" x 1" unidirectional rotors
with a 5 x 4.75" bolt pattern, and 72mm 1-piston cast iron calipers. Choose from
standard rotors, slotted and plated rotors or the optional Big Bite slotted, drilled
and plated rotors.
Important: Photo for illustration purposes only; conversion set contents may vary.
Note: 14" x 7" minimum wheel size. Shipped overweight.
A1291
A1291S
A1291D
A129
A129S
A129D
Models with Manual Brakes
1955-57 standard rotors ...............................................
1955-57 slotted and plated rotors.................................
1955-57 Big Bite drilled rotors ....................................
Models with Power Brakes
1955-57 standard rotors ...............................................
1955-57 slotted and plated rotors.................................
1955-57 Big Bite drilled rotors ....................................
624.99 set
724.99 set
824.99 set
One piston front disc brake conversion sets for 1955-57 models with disc or drum
front brakes. Sets includes 2" drop spindles, 11" x 1" unidirectional rotors with a 5 x
4.75" bolt pattern, and 72mm 1-piston cast iron calipers. Choose from standard rotors,
slotted and plated rotors or the optional Big Bite slotted, drilled and plated rotors.
Important: Photo for illustration purposes only; conversion set contents may vary.
A12924
A12924S
A12924D
standard rotors .............................................
slotted and plated rotors...............................
Big Bite drilled rotors ..................................
1955-57 standard rotors .............................................
1955-57 slotted and plated rotors...............................
1955-57 Big Bite drilled rotors ..................................
226
SSBC Front Disc Brake Sets
1955-57
1955-57
1955-57
1029.99 set
1074.99 set
1114.99 set
1184.99 set
1114.99 set
1184.99 set
1234.99 set
1369.99 set
1269.99 set
1369.99 set
1269.99 set
1369.99 set
2-Piston 2" Drop Height Front Disc Brake Conversion Sets
Two-piston front disc brake conversion sets for 1955-57 models with disc or drum
front brakes. Sets include 2" drop height spindles, 11.25" x .9375" unidirectional
rotors with 5 x 4.75" bolt pattern and 43mm 2-piston aluminum calipers. Choose
from the standard slotted and plated rotors or the optional Big Bite slotted, drilled
and plated rotors. Also choose from standard clear anodized calipers or optional
black or red powder coated calipers.
699.99 set
799.99 set
899.99 set
1-Piston 2" Drop Height Front Disc Brake Conversion Sets
A12925
A12925S
A12925D
Clear Anodized Calipers
A1291A
1955-57
slotted and plated rotors .........................
A1291AD
1955-57
Big Bite drilled rotors .............................
Black Powder Coated Calipers
A1291ABK 1955-57
A1291ABKD 1955-57
Red Powder Coated Calipers
A1291AR
1955-57
A1291ARD 1955-57
A129A
1955-57
A129AD
1955-57
A129ABK
1955-57
A129ABKD 1955-57
A129AR
1955-57
A129ARD
1955-57
914.99 set
1014.99 set
1114.99 set
939.99 set
1039.99 set
1139.99 set
A12931
1955-57
A12931D
1955-57
Black Powdercoated Calipers
A12931BK
1955-57
A12931BKD 1955-57
Red Powdercoated Calipers
A12931R
1955-57
A12931RD
1955-57
A12930
1955-57
A12930D
1955-57
A12930BK
1955-57
A12930BKD 1955-57
A12930R
1955-57
A12930RD
1955-57
1239.99 set
1339.99 set
1344.99 set
1444.99 set
1344.99 set
1444.99 set
1369.99 set
1469.99 set
1454.99 set
1554.99 set
1454.99 set
1554.99 set
Front Disc Brake Sets
All Front Disc Brake Sets Include:
(unless otherwise indicated)
• Calipers
• Rotors
• Splash Shields
• Spindles
• Hoses
• Master Cylinder
• Power Booster
• Brake Pads
• Wheel Bearings
• Installation Instructions
Competition Series Caliper
This caliper is the new standard
in braking performance. Advanced
engineering offers increased braking
power in a sleek, lightweight design.
• Ultra-Light Design • Parking Brake Provision
• Direct Bolt-On
• Improves Wheel Clearance
3-Piston Disc Brake Conversion Sets
4-Piston Disc Brake Conversion Sets
Three-piston front disc brake conversion sets for
1955-57 models with disc or drum front brakes.
Sets utilize stock drum or disc brake spindle (not
included). Includes 13" x 1.25" unidirectional
rotors with 5 x 4.75" bolt pattern and 38mm
3-piston aluminum calipers. Choose from the
standard slotted and plated rotors or the optional
Big Bite slotted, drilled and plated rotors. Also
choose from standard clear anodized calipers or
optional black or red powder coated calipers.
Four-piston front disc brake conversion sets
for 1955-57 models with disc or drum front
brakes. Sets utilize stock drum or disc brake
spindle (not included). Includes 13" x 1.125"
unidirectional rotors with 5 x 4.75" bolt pattern,
braided stainless steel flex lines, caliper mounting
brackets, mounting hardware and CNC-machined
aluminum 43mm 4-piston calipers.
Important: Conversion sets fit most 17" wheels depending
on offset.
Important: Conversion sets fit most 17" wheels depending on offset.
1749.99 set
1849.99 set
1849.99 set
1949.99 set
1849.99 set
1949.99 set
A1296
1955-57
A1296D
1955-57
with Big Bite drilled rotors .....................
A1296BK
1955-57
A1296BKD 1955-57
A1296R
1955-57
A1296RD
1955-57
1649.99 set
1749.99 set
1749.99 set
1849.99 set
1749.99 set
1849.99 set
3-Piston 2" Drop Height Disc Brake Conversion Sets
Three-piston front disc brake conversion sets for 1955-57 models with disc or
drum front brakes. Sets include 2" drop spindles, braided stainless flex lines, high
performance pads 13" x 1" unidirectional rotors with 5 x 4.75" bolt pattern and
38mm 3-piston aluminum calipers. Choose from the standard slotted and plated
rotors or the optional Big Bite slotted, drilled and plated rotors. Also choose from
standard clear anodized calipers or optional black or red powder coated calipers.
A281361
A12937
1955-57
A12937D
1955-57
A12937BK
1955-57
A12937BKD 1955-57
A12937R
1955-57
A12937RD
1955-57
A12922
1955-57
A12922D
1955-57
A12922BK
1955-57
A12922BKD 1955-57
A12922R
1955-57
A12922RD
1955-57
1784.99 set
1884.99 set
1894.99 set
1994.99 set
1894.99 set
1994.99 set
1749.99 set
1849.99 set
1849.99 set
1949.99 set
1849.99 set
1949.99 set
plain
finned
flamed
ball milled
Billet Aluminum Dual-Bowl Master Cylinder with Booster
Dress up your engine compartment with a billet aluminum dual-bowl master cylinder
with either a 7" or 9" chromed booster. Designed to fit most standard GM mounting
configurations. 1-1/8" bore master cylinders are for power disc brake applications
and include either a 7" or 9" chromed booster. Choose from 4 different style caps.
For cars with disc brakes.
Dual Bowl Master with 7" Booster
A281361
1-1/8" bore and plain cap................................................. 599.99 ea
A281362
1-1/8" bore and finned cap............................................... 599.99 ea
A281363
1-1/8" bore and flamed cap .............................................. 599.99 ea
A281364
1-1/8" bore and ball milled cap ....................................... 599.99 ea
Dual Bowl Master with 9" Booster
A281381
1-1/8" bore and plain cap................................................. 599.99 ea
A281382
1-1/8" bore and finned cap............................................... 599.99 ea
A281383
1-1/8" bore and flamed cap .............................................. 599.99 ea
A281384
1-1/8" bore and ball milled cap ....................................... 599.99 ea
SSBC Front Disc Brake Sets
227
A12922
1955-57
A12922D
1955-57
A12922BK
1955-57
A12922BKD 1955-57
A12922R
1955-57
A12922RD
1955-57
Rear Disc Brake Sets
Choose From 11.25" or
MASSIVE 12.8" Rotors
For the Ultimate in
Braking Performance!
10 & 12-Bolt Rear End 45mm 1-Piston Disc Brake Conversion Sets
One-piston disc brake conversion sets for Chevrolet 10-bolt and 12-bolt rear ends
with a non-staggered shock layout and c-clip axles only. Sets include unidirectional
rotors with 5 x 4.75" bolt pattern and 45mm 1-piston cast iron calipers. Choose from
standard rotors, slotted and plated rotors or the optional Big Bite slotted, drilled and
plated rotors. Also choose from clear anodized calipers, red powder coated calipers
or black powder coated calipers.
Important: Vehicles must have 5 x 4.75" bolt pattern for correct installation. Some vehicles
may require axle flange machining for installation. Photo for illustration purposes only;
conversion set contents may vary.
Sets with 10.5" x .9375" Rotors
I
A1252
1955-57
standard rotors ........................................
A1252S
1955-57
A1252D
1955-57
A1252R
1955-57
standard rotors ........................................
A1252RS
1955-57
A1252RD
1955-57
A1252BK
1955-57
standard rotors ........................................
A1252BKS
1955-57
A1252BKD 1955-57
Sets with 12" x 1" Rotors
594.99 set
644.99 set
694.99 set
694.99 set
744.99 set
794.99 set
694.99 set
744.99 set
794.99 set
A1257
1955-57
A1257R
1955-57
A1257BK
1955-57
794.99 set
894.99 set
894.99 set
One-piston disc brake conversion sets for Chevrolet 10-bolt and 12-bolt rear ends
with a non-staggered shock layout. Sets include unidirectional rotors with 5 x 4.75"
bolt pattern and 54mm 1-piston aluminum calipers. Choose from slotted and plated
rotors or the optional Big Bite slotted, drilled and plated rotors. Also choose from
clear anodized calipers, red powder coated calipers or black powder coated calipers.
Important: Vehicles must have 5 x 4.75" bolt pattern for correct installation. Some vehicles
may require axle flange machining for installation. Photo for illustration purposes only;
conversion set contents may vary.
Sets with 11.25" x .9375" Rotors
A12527
1955-57 slotted and plated rotors ...........................
A12527D
1955-57 Big Bite drilled rotors...............................
A12527R
A12527RD
A12527BK
A12527BKD 1955-57 Big Bite drilled rotors...............................
Sets with 12.8" x 1.10" Rotors
994.99 set
1094.99 set
1094.99 set
1194.99 set
1094.99 set
1194.99 set
Note: 17" minimum wheel size. Includes parking brakes, though cables may need to be
changed as well (not included). Shipped overweight.
A0730
A0707
A0707E
A12539
A12539D
A12539R
A12539RD
A12539BK
A12539BKD 1955-57 Big Bite drilled rotors...............................
1074.99 set
1144.99 set
1174.99 set
1244.99 set
1174.99 set
1244.99 set
SSBC Proportioning Valves
These proportioning valves from SSBC are designed to regulate and adjust brake
fluid pressure. Each valve has an adjuster knob for “on the fly” adjustments to
braking bias. Choose from just the proportioning valve, a combination valve and
pressure gauge or a combination proportioning valve and distribution block with a
built-in brake lamp switch. These valves are great for race cars, tow vehicles or any
car that requires specialized and adjustable brake pressure bias.
Proportioning Valve Only
A0707
black anodized finish....................................................... 44.99 ea
Proportioning Valve and Pressure Gauge
A0707E
black aondized finish....................................................... 64.99 ea
Proportioning Valve and Distribution Block
A0730
black anodized finish....................................................... 119.99 ea
A0730P
polished finish ................................................................. 134.99 ea
Four-piston disc brake conversion sets for Chevrolet 10-bolt and 12-bolt rear ends
with a non-staggered shock layout. Sets include unidirectional 11.25" x .9375"
rotors with 5 x 4.75" bolt pattern and 35mm 4-piston aluminum calipers. Available
exclusively with Big Bite slotted, drilled and plated rotors. Choose from clear
anodized calipers, red powder coated calipers or black powder coated calipers.
228
SSBC Rear Disc Brake Sets
Note: 15" minimum wheel size. Available only without parking brake. Shipped overweight.
W12541D
1955-57 Big Bite drilled rotors ............................. 779.99 set
W12541RD
1955-57 Big Bite drilled rotors ............................. 829.99 set
W12541BKD 1955-57 Big Bite drilled rotors ............................. 829.99 set
Forged Dynalite Pro Series Front Brake Set
Dynapro Low-Profile Rear Brake Sets with Parking Brake
Wilwood Pro Series sets include 4-Piston forged
Dynalite calipers, 11.00", 11.75" or 12.19" plain or
drilled and slotted rotors, and all necessary hubs,
brackets and installation hardware. Sets can be used
with either manual or power brake master cylinders.
Most sets require no modifications for installation and
provide plenty of clearance inside popular 15" wheels.
Calipers available in black anodized or red powder
coated finishes except as noted.
Dynapro low-profile rear disc brake sets provide a
complete solution for popular muscle car rear axles
that require a parking brake assembly and extra
clearance for 14" and 15" wheels. Forged billet
Dynapro Low-Profile four-piston calipers 11.00"
one-piece hat and rotor assemblies, and high friction
pads provide optimized and balanced braking. The
hidden internal parking brake shoe system provides
a clean installation and superior static holding
power for parking. Optional caliper finishes and
rotor designs enable the builder to personalize the
style and optimize brake performance. Calipers are
available anodized black or powder coated red.
Important: Installation of 11" and 12.19" front brake sets
1407676
increase front track width 0.230". Installation of 11.75" front
Assembled
brake sets increase front track width 0.300". Verify backspacing
of wheels utilizing the diagram to ensure correct wheel fitment before purchase at www.
wilwood.com. All front hubs feature 1/2"-20 wheel studs.
Brake Sets with 11.00" Rotors
Black Anodized Calipers
14011491
1955-57
plain rotors ..............................................
14011491D
1955-57
drilled rotors ............................................
14011491R
1955-57
plain rotors ..............................................
14011491DR 1955-57
drilled rotors ............................................
14011010
1955-57
plain rotors ..............................................
1401010D
1955-57
drilled rotors ............................................
14011010R
1955-57
plain rotors ..............................................
14011010DR 1955-57
drilled rotors ............................................
1407676
1955-57
plain rotors ..............................................
1407676D
1955-57
drilled rotors ............................................
689.99 set
794.99 set
779.99 set
889.99 set
689.99 set
794.99 set
779.99 set
884.99 set
899.99 set
999.99 set
DynaPro 6 Big Front Brake Set
DynaPro 6 Series Front Hub Sets feature forged billet calipers combined with 12.19"
diameter rotors for this group of traditional non-ABS spindles on American muscle
cars. The enhanced brake capacity and pad performance is due to six heavy wall
stainless steel pistons, an intermediate level alternative to the bigger six piston sets.
Wilwood’s low dust, low noise improved friction formula brake pads are retained
with exclusive Wilwood Quick-E clips for simplified pad service without caliper
removal. 12.19" vented iron rotors are manufactured from premium grade carbon
iron to provide long wear with high thermal stability and resistance to distortion
thus add stopping power and cooling capacity over smaller diameter OE rotors.
These sets compliment wheel, tire, and suspension upgrades on all types of custom
show and high performance street/strip machines. A full range of caliper finishes
and rotor designs enable the builder to personalize the style and optimize the brake
performance for each individual application. DynaPro sets can be used with either
manual or power assisted master cylinders.
Important: May fit some 15" wheels, check wheel clearance diagram in installation
instructions at www.wilwood.com before purchase. All front hubs feature 1/2"-20 wheel
studs.
Notes: Shipped overweight. Discount exempt.
14010737
1955-57
14010737D
1955-57
plain rotors ............................................ 1189.99 set
drilled rotors .......................................... 1294.99 set
Sets for 1955-57 Stock Axle
14011405
plain rotors
2.34" offset .............................. 674.99
14011405D
drilled rotors
2.34" offset .............................. 774.99
14011405R
plain rotors
2.34" offset .............................. 764.99
14011405DR
drilled rotors
2.34" offset .............................. 864.99
Sets for 10-Bolt & 12-Bolt w/C-Clip Axles, 2.81" Offset
14011394
plain rotors
2.81" offset .............................. 674.99
14011394D
drilled rotors
2.81" offset .............................. 774.99
14011394R
plain rotors
2.81" offset .............................. 764.99
14011394DR
drilled rotors
2.81" offset .............................. 874.99
set
set
set
set
set
set
set
set
Forged Dynalite Pro Series Rear Brake Sets with Parking Brake
Forged Dynalite Pro Series
rear disc brake sets provide
a complete solution for rear
axles that require a parking
brake. Sets include forged
4-piston Dynalite calipers,
12.19" one-piece rotors
with internal parking brake
drums, high-friction pads
and all necessary brackets
and installation hardware.
Optional caliper finishes
and rotor designs enable the
builder to personalize the
style and optimize brake
performance. Calipers are
available anodized black or
powder coated red.
1407141
Important: May fit some 15" wheels. Check wheel clearance diagram with installation
instructions at www.wilwood.com before purchase.
Sets for 1955-57 Stock Axle, 2.34" Offset
14011348
plain rotors
2.34" offset ..............................
14011348D
drilled rotors
2.34" offset ..............................
14011348R
plain rotors
2.34" offset ..............................
14011348DR
drilled rotors
2.34" offset ..............................
Sets for 10-Bolt & 12-Bolt w/C-Clip Axles
1407149
plain rotors
2.75" offset ..............................
1407149D
drilled rotors
2.75" offset ..............................
1407141
plain rotors
2.81" offset ..............................
1407141D
drilled rotors
2.81" offset ..............................
1407149DR
drilled rotors
2.75" offset ..............................
1407141DR
drilled rotors
2.81" offset ..............................
Sets for 10-Bolt & 12-Bolt w/3.15" Torino Bearing
1407578
plain rotors
2.81" offset ..............................
1407578D
drilled rotors
2.81" offset ..............................
Wilwood Disc Brake Sets
648.99 set
754.99 set
739.99 set
844.99 set
654.99
759.99
654.99
759.99
set
set
set
set
854.99 set
854.99 set
Ends
754.99 set
759.99 set
229
14010737
14011394DR
Assembled
Important: For OE C-Clip axles only. Does not support
Special End or C-Clip Eliminator modifications. Set fits some 14" wheels. Check wheel
clearance diagram in kit installation instructions before purchase at www.wilwood.com.
Disc Brake Conversion Sets
Wilwood BP-10 Brake Pads
Wilwood’s exclusive BP-10 is a
type of metallic-composite friction
pad compound. BP-10 exhibits the
medium to high temperature friction
characteristics of a semi-metallic
based race compound with the
low temperature response,
quiet engagement and
lowered dust levels normally
associated with ceramic based
street performance pads. The
combination of these characteristics
make it the perfect choice for your street machine, auto crosser, or drag racer.
1508850K
Dynalite type 7112........................................................
41.99 set
TR103101
1955-57 Chevy Rear Disc Brake Conversion
Complete rear disc conversion set including brackets to mount the calipers, fully
loaded new calipers, rotors, flex hoses, hardware and a pair of rear cables. Also
available without the parking brake and cables.
With Parking Brake
TR103101 1955-57 10/12 bolt ....................................................... 434.99 set
Without Parking Brake/Cables
TR103102 1955-57 10/12 bolt ....................................................... 324.99 set
Parking Brake Cable
Complete the installation of your
Wilwood parking brake set. These
cable sets are compatible with all of
Wilwood’s internal drum parking
brake sets including the Dynalite
and Superlite sets. This cable will
connect Wilwood’s parking brake
mechanism to your vehicle’s OE
equalizer assembly. The cables are
simple to install and adjust and the
cable housing’s black
finish disappears under the car for a clean looking undercarriage.
3309371
parking brake cable set with clevis .................................. 119.99 set
TR102111
1955-57 Chevy Four-Wheel Disc Brake Conversion
Four-wheel disc brake conversion set that includes rotors, master cylinder,
proportioning valve and brake booster. Available in manual or power brake systems
and come standard with plain rotors and black powder coated calipers or upgrade to
cross drilled/slotted rotors or add a chrome master cylinder (and booster on power
systems). Cross drilled/slotted rotor sets also include braided stainless flex hoses.
I
Power Brakes
TR102101 1955-57
TR102102 1955-57
TR102103 1955-57
Manual Brakes
TR102111 1955-57
TR102112 1955-57
TR102113 1955-57
TR102122
1955-57 Chevy Front Disc Brake Conversion
Froont disc brake conversion set that includes rotors, master cylinder, proportioning
valve and brake booster. Available in manual or power brake systems and come
standard with plain rotors and black powder coated calipers. For extra stopping
power, upgrade to cross drilled/slotted rotors. Also add a chrome master cylinder
(and booster on power systems). Cross drilled/slotted rotor sets also include braided
stainless flex hoses.
Power Brakes
TR102121
1955-57
TR102122
1955-57
TR102123
1955-57
Manual Brakes
TR102131
1955-57
TR102132
1955-57
TR102133
1955-57
230
standard .................................................... 544.99 set
drilled/slotted ............................................ 654.99 set
drilled/slotted & chrome booster/master .. 747.99 set
standard .................................................... 467.99 set
drilled/slotted ............................................ 577.99 set
drilled/slotted & chrome master cylinder . 670.99 set
plain rotors ................................................. 934.99 set
drilled/slotted ............................................. 1154.99 set
drilled/slotted w/chrome booster/master .... 1248.99 set
plain rotors ................................................. 934.99 set
drilled/slotted ............................................. 1077.99 set
drilled/slotted w/chrome master cylinder... 1171.99 set
TF500161
Heidt’s 2" Drop Spindle Brake Sets
Complete your Heidt's 2" Drop Spindle installation using Early or Late GM calipers
or Wilwood Brakes. Sets include rotors, calipers with pads, bearings and seals,
spindle nuts, dust caps, hoses and banjo bolts. Updates early stock spindle disc
brake sets to Heidt's 2" drop spindles. Spindles sold separately.
Important: Wilwood brakes move each wheel out 13/16" from stock location. It is
recommended that you use the narrow tubular control arms to adjust for this change. The
GM Brakes move each wheel out 5/16" from stock location.
Sets with GM Single Piston Calipers & 10.5" Rotors
TF500159 1955-57 early GM disc brakes ................................. 299.99 set
TF500158 1955-57 late GM disc brakes ................................... 299.99 set
Sets with Wilwood Four Piston Calipers & 11" Drilled Rotors
TF500160 1955-57 polished hubs and calipers ......................... 1079.99 set
TF500161 1955-57 polished hubs and calipers ......................... 1119.99 set
1955-57 Rear Big Brake Set
This rear brake system maximizes
stopping power at the rear wheels
with 12" cross-drilled gas slotted
and zinc washed rotors. Longer
studs attach the rotors to the
factory axle while calipers are
mounted with custom brackets.
Set includes rotors, calipers, brake
lines, brackets, cables, hoses, clips,
hardware, and instructions to assure
hassle-free installation. This set
requires disc brake type wheels, l5" diameter or larger. Available with raw steel
or red powder coated calipers.
1955-57 Complete Stock Height Front Disc Brake Set
Improve your vehicle’s stopping power and retain stock ride height with a complete
front disc brake set. These sets offer the least possible offset using off-the-shelf
rotors (many disc brake sets will push your wheels out towards the fender 7/8" per
side or more, causing clearance and safety concerns). Requires minimum 14" disc
brake-style wheels. These complete sets include rotors, loaded Big Bore calipers
and brackets, brake hoses and hard lines, bearings, seals and 8" booster set.
Important: This set moves the hub out 3/8" per side from stock location.
TF500095
TF500096
1955-57
1955-57
plain rotors
drilled rotor
rubber brake hose ................ 649.99 set
stainless steel brake hose ..... 759.99 set
TF500182
TF500183
1955-57
1955-57
raw steel calipers ............................................ 699.99 set
red calipers ..................................................... 759.99 set
1955-57 Front & Rear Disc Brake Systems
Improve the stopping
power of your vehicle
by converting to four
wheel disc brakes with
this complete system.
Sets include rotors,
calipers, brackets,
cables, hoses, hard
lines, bearings, seals,
8" booster, master
cylinder, proportioning
valve, and mounting
hardware. These sets
require 15" disc brake type wheels or larger.
TF500097
TF500098
1955-57
1955-57
standard
drilled rotors
............................................. 759.99 set
stainless steel hoses ............. 859.99 set
set
set
set
set
set
set
set
set
set
set
set
set
1955-57 Front & Rear Big Brake Sets
1955-57 Standard Rear Disc Brake Set
Increase stopping power at the rear wheels with this rear disc brake conversion for
your original rear end. This bolt-on set comes with everything needed for installation:
rotors, caliper mounting brackets and axle spacers, loaded calipers, brake hoses,
pre-bent hard lines, axle studs, emergency brake cables and mounting hardware.
Installation instructions are included. Available with plain rotors and rubber hose
or drilled rotors and stainless steel hose.
TF500179
TF500180
1955-57
1955-57
plain rotors
drilled rotors
rubber brake hose ................ 649.99 set
stainless steel brake hose ..... 749.99 set
This brake system for
1955-57 models uses
cross-drilled, gas-slotted,
zinc-washed rotors mounted
to an anodized aluminum
hub. The calipers mount to
the original spindles with
custom brackets and feature
twin 52mm pistons. Includes
all components and hardware
to complete installation.
Requires 17" wheels or larger.
Important: This set moves the hub
out 3/8" per side from stock location.
Big Brakes with Raw Calipers
TF500099 1955-57 front and rear ................................................ 1499.99
TF500182 1955-57 rear - 12" rotors ............................................ 699.99
Big Brakes with Red Calipers
TF500099R 1955-57 front and rear ................................................ 1609.99
BB4001R 1955-57 front - 13" rotors .......................................... 859.99
TF500183 1955-57 rear - 12" rotors ............................................ 759.99
CPP Disc Brake Conversion Sets
set
set
set
set
set
231
1955-57 Complete 2" Drop Spindle Front Disc Brake Set
Improve the braking of your vehicle and lower your front end with a complete front
disc brake set with drop spindles. Provides the least possible offset using off the shelf
rotors (many disc brake sets will push your wheels out towards the fender 7/8" per
side or more, causing clearance and safety concerns). Set includes rotors, calipers
and brackets, hard lines, hoses, 2" drop spindles, bearings, seals, 8" booster, master
cylinder and proportioning valve set. Requires minimum 15" disc brake wheels.
Brake Sets for Standard Height Spindles
Stock 1955-57 Rear End
TF500093 1955-57 plain rotors
rubber brake hose .............. 1299.99
TF500094 1955-57 drilled rotors stainless steel brake hose ... 1519.99
Chevrolet 10 & 12 Bolt Rear End
Ford 9" Rear End with 3/8" Flange Bolts
Brake Sets for 2" Drop Spindles
Stock 1955-57 Rear End
Chevrolet 10 & 12 Bolt Rear End
Ford 9" Rear End with 3/8" Flange Bolts
Electronic Disc Brake Conversion Sets
Hi-tech remote electronic pump
eliminates outdated and unsightly
original vacuum booster
Remote Electric Hydraulic Pump Provides Power
True bolt-on solution requires
no change in spindles.
Eliminates the Bulky Brake Booster
Gain valuable clearance in the firewall area by doing
away with the unsightly, inefficient vacuum power
booster. Sleek billet aluminum master cylinder takes
its place for an improved appearance & performance.
Increases Braking Pressure and Performance
This electronic system runs on brake fluid, is self
contained and consistently provides 1400-2500 psi of
braking pressure at the wheel. A perfect upgrade for
engines with low vacuum due to a performance cam.
True Bolt-on - Requires No Vacuum
Replaces your OEM brake master cylinder as a direct
bolt on (no drilling required). Adjustable pedal rod to
allow for correct pedal height.
Eliminates firewall
clutter and
provides significant
clearance.
Sleek billet aluminum
master cylinder provides
for a better appearance and
high performance braking.
Electric High Power Master Cylinder
I
These electric master cylinders are the answer to lost braking power caused by large
camshafts and the solution to valve cover clearance issues. The most innovative
system on the market today, this bolt-on upgrade replaces the brake booster/master
cylinder option with a compact billet aluminum master cylinder that does not rely
on vacuum for power assist. Complete with a remotely mounted power supply, this
fully self contained unit allows the master cylinder to provide between 1400 and
2500 psi of pressure. Measures 9" long and 3.5" wide.
PB10569
1955-57 ........................................................................ 1349.99 set
PB10700
1955-57 Electronic Disc Brake Systems
Looking for a big brake upgrade for your 1955-57 Chevy? These kits are a great
solution. These conversions from ABS Power Brake are a true bolt-on and mount
to the OEM brake spindles (12" rotors require 16" or larger wheels, 13" rotors
require 18" wheels). This complete system includes all necessary brackets and a
Power Brake Electric High Power Master cylinder (an EHPM offers cars with big
cams added braking capacity and additional valve cover clearance).
PB10138
1955-57 Zero Offset Disc Brake System
Note: Shipped double oversize
Front and Rear
PB10700
1955-57
12" front and 12" rear - w/EHPM.............
PB10702
1955-57
Front and Rear with 2" Drop Spindles
PB10704
1955-57
10-3/4" front and rear - w/EHPM .............
PB10706
1955-57
PB10708
1955-57
Front Only
PB10701
1955-57
12" front - w/EHPM .................................
PB10703
1955-57
13" front - w/EHPM .................................
Front Only with 2" Drop Spindles
PB10705
1955-57
10-3/4" front - w/EHPM ...........................
PB10707
1955-57
12" front - w/EHPM .................................
PB10709
1955-57
13" front - w/EHPM .................................
232
OS2
2699.99 set
2995.99 set
2929.99 set
2919.99 set
3749.99 set
1949.99 set
2769.99 set
1879.99 set
2179.99 set
2999.99 set
This disc brake system is the answer to lost braking power caused by large camshafts
and the solution to valve cover clearance issues. This bolt-on solution from ABS
Power Brake mounts to the OEM brake spindles and works with 14" OEM style
wheels. These sets include 10-3/4" cross-drilled and slotted rotors, all necessary
brackets, and the Electric High Power Master cylinder.
Front and Rear
PB10138
1955-57
w/EHPM ..................................................
Front and Rear - Chrome
PB10138C 1955-57
w/EHPM ..................................................
Front Only
PB10141
1955-57
w/EHPM ..................................................
Front Only - Chrome
PB10141C 1955-57
w/EHPM ...................................................
Electronic Disc Brake Conversion Sets
OS2
2665.99 set
2999.99 set
1874.99 set
2099.99 set
1955-57 True Bolt-On Disc Brake Conversion Sets
Rear Disc Brake Conversion Sets
No Need for Front End Alignment
True bolt-on front disc brake conversion set
eliminates the need for front end alignment due to
spindle change.
Simple Installation
Conversion set includes calipers, rotors, mounting
brackets, parking brake cables and all required
hardware for installation.
Easier and Quicker to Install
Because these sets bolt-on your existing OEM
spindles, installation time is drastically reduced.
More Flexibility in Wheel Options
Upgrade for 1955-57 models providing for a modern
disc brake system in the rear while allowing the use
of OEM size wheels. Later model sets offer a 12" big
brake upgrade for the rear.
Greater Flexibility in Wheel Options
Sets for 1955-57 Chevy models available in a variety
of rotor sizes for use with stock 14" diameter OE style
wheels or for larger diameter custom wheels of your
choice.
PB10711
1955-57 Disc Brake System W/Booster
Looking for a bolt-on front disc brake setup for your 1955-57 Chevy? This system
from ABS Power Brake is the answer. Designed to bolt up to the OEM spindles, each
system includes all necessary brackets, a new 8" Dual Power Brake Booster Combo,
master cylinder and proportioning valve so you can select the correct combination
(disc/drum or disc/disc). Available with 10-3/4", 12" or 13" rotors and regular or
chrome plated Dual Brake Booster Combo. Rotors are cross-drilled/slotted.
Important: *Requires 16" or larger wheels. **Requires 18" or larger wheels.
Note: Special order, must be prepaid. Shipped double oversize.
1569.99 set
1769.99 set
2549.99 set
2399.99 set
974.99 set
1029.99 set
1839.99 set
1499.99 set
PB10125
1955-57 Bolt-On Rear Disc Upgrade Sets
Looking for a rear disc brake upgrade for your 1955-57 Chevy? This rear disc
conversion is the answer. Available either with 10-1/2" OEM size rotors on GM
10 and 12 bolt rear ends, or 10-3/4" on Ford 9" rear ends (works with OEM size
wheels), or as a big brake upgrade with 12" rotors (requires 16" or larger wheels).
Designed as a true bolt on, this ABS Power Brake setup mounts to the OEM
differential housing. Each system includes all necessary brackets, calipers, parking
brake cables and all hardware for a complete install.
PB10713
1955-57 Front Bolt-On Disc Brake System
Looking for a disc brake upgrade for the front of your 1955-57 Chevy that will bolt
up to the OEM spindles? This ABS Power Brake setup is the answer. Designed as
a true bolt-on, these sets are available either with 10-3/4" rotors (works with 14"
OEM style wheels), 12" rotors (require 16" or larger wheels) or 13" rotors (require
18" or larger wheels). Rotors are cross-drilled and slotted. Included with the system
are all necessary brackets.
Important: *Requires 16" or larger wheels. **Requires 18" or larger wheels.
Standard
PB10150
PB10713*
PB10714**
Chrome
PB10150C
OS2
1955-57
1955-57
1955-57
10-3/4" rotors ............................................ 608.99 set
12" rotors................................................... 679.99 set
13" rotors................................................... 1499.99 set
1955-57
10-3/4" rotors............................................
749.99 set
Important: *Requires 16" or larger wheels. Note: Shipped double oversize.
Stock Rear Ends
PB10723
1955-57 10-3/4" plain rotors ........................................
PB10724
1955-57 10-3/4" cross-drilled/slotted rotors ................
PB10717* 1955-57 12" plain rotors ..............................................
PB10718* 1955-57 12" cross-drilled/slotted rotors ......................
10 & 12 Bolt Rear Ends
PB10121
1955-57 10-1/2" plain rotors ........................................
PB10122
Ford 9" Rear Ends
PB10123
1955-57 10-3/4" plain rotors ........................................
PB10124
OS2
679.99
749.99
789.99
869.99
set
set
set
set
675.99 set
749.99 set
749.99 set
679.99 set
749.99 set
743.99 set
233
Front and Rear
PB10710
1955-57 10-3/4" rotors ...........................................
PB10711*
1955-57 12" rotors..................................................
PB10715** 1955-57 13" front/ 12" rear rotors ..........................
Front and Rear - Chrome
PB10710C 1955-57 10-3/4" rotors ...........................................
Front Only
PB10144
1955-57 10-3/4" rotors ...........................................
PB10712*
1955-57 12" rotors..................................................
PB10716** 1955-57 13" rotors..................................................
Front Only - Chrome
PB10144C 1955-57 10-3/4" rotors ...........................................
PB10122
OS2
Replacement Brake Parts
TF500226
PB823
PB823D
TF500229
1955-57 Floor Mount Power Booster
PB823C
Gold Cadmium Finish
7", 8" or 9" Single Diaphragm Booster
Front Drum/Rear Drum
Front Disc/Rear Drum
Front Disc/Rear Disc
Give your classic Chevy a clean, street rod look with
one of these floor mount 7" power brake booster sets.
This bolts under the floor, tucked up high with plenty
of ground clearance. Includes brake pedal assembly,
frame bracket, 7" dual brake booster, master cylinder
and proportioning valve (not included on 4 wheel drum
brake sets). Bracket available separately.
TF500226 1955-57 drum/drum ......... 374.99 set
TF500227 1955-57 disc/drum ........... 374.99 set
TF500228 1955-57 disc/disc ............. 374.99 set
TF500229 1955-57 bracket only ....... 199.99 set
PB823DC
Gold Cadmium Finish
7", 8" or 9" Dual Diaphragm Booster
Front Drum/Rear Drum
Front Disc/Rear Drum
Front Disc/Rear Disc
I
PB10720
Single Diaphragm
Booster/Master/Prop Valve Combo
Dual Diaphragm
Booster/Master/Prop Valve Combo
These all-new single diaphragm brake booster/master
cylinder/proportioning valve combinations mount upclose to the firewall for added valve cover clearance
and improved pedal ratio for full use of master cylinder
travel, which means a higher, firmer, and safer pedal.
Available in original style gold cadmium finish or
chrome plated finish.
These all-new dual diaphragm brake booster/master
cylinder/proportioning valve combinations mount
closely to the firewall for added valve cover clearance
and improved pedal ratio for full use of master cylinder
travel. This means a higher, firmer, and safer brake
pedal. Available in original style gold cadmium finish
or chrome plated finish.
Important: Units for cars with front & rear drum brakes do
not include proportioning valve, bracket or lines.
Important: Units for cars with front & rear drum brakes do
not include proportioning valve, bracket or lines.
Original Style Gold Cadmium Finish
Vehicles with Front and Rear Drum Brakes
PB814 1955-57 7" booster .............. 324.99 ea
PB817 1955-57 8" booster .............. 324.99 ea
PB820 1955-57 9" booster .............. 324.99 ea
Vehicles with Front Disc and Rear Drum Brakes
PB813 1955-57 7" booster .............. 324.99 ea
PB823 1955-57 8" booster .............. 324.99 ea
PB825 1955-57 9" booster .............. 324.99 ea
Vehicles with Front and Rear Disc Brakes
PB827 1955-57 7" booster .............. 299.99 ea
PB830 1955-57 8" booster .............. 324.99 ea
PB833 1955-57 9" booster .............. 324.99 ea
Chrome Plated Finish
PB814C 1955-57 7" booster .............. 609.99 ea
PB817C 1955-57 8" booster .............. 609.99 ea
PB820C 1955-57 9" booster .............. 609.99 ea
PB813C 1955-57 7" booster .............. 609.99 ea
PB823C 1955-57 8" booster .............. 609.99 ea
PB825C 1955-57 9" booster .............. 609.99 ea
PB827C 1955-57 7" booster .............. 609.99 ea
PB830C 1955-57 8" booster .............. 609.99 ea
PB833C 1955-57 9" booster .............. 609.99 ea
Original Style Gold Cadmium Finish
PB814D 1955-57 7" booster............. 324.99 ea
PB817D 1955-57 8" booster............. 324.99 ea
PB820D 1955-57 9" booster............. 324.99 ea
PB813D 1955-57 7" booster............. 324.99 ea
PB823D 1955-57 8" booster............. 324.99 ea
PB825D 1955-57 9" booster............. 324.99 ea
PB827D 1955-57 7" booster............. 324.99 ea
PB830D 1955-57 8" booster............. 324.99 ea
PB833D 1955-57 9" booster............. 324.99 ea
Chrome Plated Finish
PB814DC 1955-57 7" booster............. 609.99 ea
PB817DC 1955-57 8" booster............. 609.99 ea
PB820DC 1955-57 9" booster............. 609.99 ea
PB813DC 1955-57 7" booster............. 609.99 ea
PB823DC 1955-57 8" booster............. 609.99 ea
PB825DC 1955-57 9" booster............. 609.99 ea
PB827DC 1955-57 7" booster............. 609.99 ea
PB830DC 1955-57 8" booster............. 609.99 ea
PB833DC 1955-57 9" booster............. 609.99 ea
234
Dual Diaphragm Booster/Master Combo
For Vehicles with OEM Generator & PS Pump
This unique booster with special mounting bracket
allows you to retain the factory generator and power
steering pump. This combination will give you the
luxury of power brakes with a dual line master cylinder
without the need to modify your factory power steering
pump setup. This gives you the ease of power brakes
with the safety of a dual master cylinder. Includes an
8" dual diaphragm and dual master cylinder.
PB10720 1955-57 disc/drum............. 449.99 ea
PB10721 1955-57 disc/disc............... 449.99 ea
Treadle-Vac Master/Booster Combo
Replacement Treadle-Vac replacement master cylinder,
proportioning valve and 7" dual diaphragm booster
combination for 1955-57 models. Easy to install and
includes an adjustable rod for correct pedal height.
Proportioning valve functions for drum/drum, disc/
drum or disc/disc applications.
PB10719 1955-57 ............................... 389.99 ea
2608556
Wilwood Disc Brake Master Cylinders
Remote Power Brake Booster Set
Clean up your engine bay with a Remote Power Brake
Booster from ABS Power Brakes. Ideal for enthusiasts
who want a clean firewall with no master cylinder or
booster visible, this set mounts the master cylinder and
pedal under the floor and remotely mounts a 11"AC
Delco style dual diaphragm power brake booster with a
second master cylinder in the trunk. This inline power
brake booster will deliver high performance stopping
power and is also ideal for cars with 4 wheel disc brakes.
PB10722 1955-57 ................................ 499.99 set
1955-57 Chrome Master Cylinder
Now you can have show-stopping looks without
the hefty price tag. This master cylinder features a
chrome finish, standard 3/8"-24 threaded ports to
accept standard 3/16" I.F. tube nuts, and mounting
holes slotted to fit all GM applications. The unique
piston design works for manual brakes (deep bore) and
includes a bore adapter to work with a brake booster
(shallow bore). The built-in reservoir has enough
capacity to handle everything from drum brakes to 8
piston calipers. Available in 1" and 1-1/8" bore, with
or without proportioning valve.
Master Cylinder Without Proportioning Valve
TF500230 1955-57 1" bore .................. 129.99 ea
TF500231 1955-57 1-1/8" bore ........... 129.99 ea
Master Cylinder With Proportioning Valve
TF500232 1955-57 1", disc/drum ........ 279.99 set
TF500233 1955-57 1", disc/disc .......... 279.99 set
TF500234 1955-57 1-1/8", disc/drum . 279.90 set
TF500235 1955-57 1-1/8", disc/disc ... 279.99 set
These beautifully-crafted tandem-chamber master
cylinders are configured for four wheel disc brake
applications. They feature a slotted mounting flange
that bolts directly to your brake booster or firewall.
Manual brakes require 1" bore. Power assisted brakes
use 1-1/8" bore. Features fluid outlets on both sides
of the cylinder to simplify plumbing based on mount
location. Available in a natural finish, a bright finish
or Wilwood's exclusive black E-coat.
1-1/8" Bore Master Cylinders
2608556
natural finish.....................
2608556P
bright finish ......................
2608556BK black finish .......................
1" Bore Master Cylinders
2608555
natural finish.....................
2608555P
bright finish ......................
2608555BK black finish .......................
189.99 ea
244.99 ea
239.99 ea
A4671
A4742
Combo Billet Aluminum
Dual Bowl Master Cylinder
TF500060
Master Cylinder/Prop Valve Combo
This is a new master cylinder with a new proportioning
valve, wire, plug and lines completely assembled and
ready to install.
Front Disc & Rear Drum Brakes
TF500059 1955-57 side mount .......... 199.99 ea
TF500060 1955-57 under mount ......... 219.99 ea
Front & Rear Disc Brakes
TF500061 1955-57 side mount .......... 199.99 ea
TF500062 1955-57 under mount ........ 219.99 ea
Combination polished billet aluminum master cylinder
and built-in adjustable proportioning valve, distribution
block and wiring pigtail for rear brake light switch.
Fits most standard GM mounting configurations. The
1-1/8" bore master cylinders are for power disc brake
applications. The 1" bore master cylinders are for
manual disc brake applications. Also available is a 1"
bore with short reservoir for low clearance mounting.
Designed for both disc/drum and disc/disc applications.
Choose from 4 different style caps.
1" Bore for Manual Disc Brakes
A4731 plain cap .................................. 559.99 ea
A4732 finned cap ................................ 559.99 ea
A4733 flamed cap ............................... 559.99 ea
A4735 ball milled cap ......................... 559.99 ea
A4721 short reservoir w/plain cap ...... 559.99 ea
A4722 short reservoir w/finned cap .... 559.99 ea
A4723 short reservoir w/flamed cap ... 559.99 ea
A4725 short reservoir w/ball milled cap 559.99 ea
1-1/8" Bore for Power Disc Brakes
A4741 plain cap .................................. 559.99 ea
A4742 finned cap ................................ 559.99 ea
A4743 flamed cap ............................... 559.99 ea
A4745 all milled cap ........................... 559.99 ea
plain
finned
flamed
ball milled
Billet Aluminum Dual-Bowl Master Cylinder
Dress up your engine compartment with a billet
aluminum dual-bowl master cylinder. Designed to
fit most standard GM mounting configurations, 1"
bore master cylinders are for non-power disc brake
applications while 1-1/8" bore master cylinders are
for power disc brake applications. Choose from 4
different style caps.
1" bore for Manual Brakes
A4671 plain cap .................................. 410.99 ea
A4672 finned cap ................................ 410.99 ea
A4673 flamed cap ............................... 410.99 ea
1-1/8" bore for Power Brakes
A4691 plain cap .................................. 410.99 ea
A4692 finned cap ................................ 410.99 ea
A4693 flamed cap ............................... 410.99 ea
235
TF500059
189.99 ea
244.99 ea
239.99 ea
Manual Push Rod Set
TF500070
1955-57 Brake Combination Valve Sets
TF500071
1955-57 Master Cylinder Cap
PV72K
If you need a new disc brake combination valve, these
carefully machined reproduction brass valves are the
perfect replacement. Each will fit and function for
all disc brake master cylinders with either disc/drum
or disc/disc brake conversions. Each set includes:
combination valve, bracket and hardware.
PV71K 1955-57 w/disc/drum brakes . 79.99 set
PV72K 1955-57 w/disc/disc brakes ... 79.99 set
This special heavy duty push rod converts cars equipped
with power brakes to manual brakes. Uses present
master cylinder. Must have deep hole in piston. Rod
adjusts 8-1/2" to 9-1/2" from tip of the rod to the center
of the mounting hole.
398721 ................................................ 22.99 set
Reproduction master cylinder caps for 1955-57 models.
They are complete including the splash shield. Both
are screw-on type caps. Each cap includes the gasket.
Replacement gaskets also available separately.
TF500070 1955-56 unnumbered......... 29.99 ea
TF500071 1957
numbered............. 29.99 ea
TF500072 1955-57 cap gasket ............ 1.99 ea
TF500111
1955-57 Treadle-Vac
Power Brake Vacuum Canister
Reproduction vacuum canister for 1955-57 models with
Treadle-Vac power brake unit. Nickel plated as original.
TF500110
1955-56 ............................ 124.99 ea
TF500111
1957.................................. 124.99 ea
A0707
1955-57 Master Cylinder Hardware Set
A0707E
A0730
Master cylinder hardware set for 1955-57 models.
Fits standard or power brakes. For original equipment
master cylinder only. Includes original style bolt, 2
copper washers and brass junction block for a complete
replacement.
BH400114 1955-57 4 piece set.......... 25.99 set
BH400115 1955-57 copper washers .. 3.99 set
I
Adjustable Proportioning Valves
These proportioning valves from SSBC are designed
to regulate and adjust brake fluid pressure. Each valve
has an adjuster knob for “on the fly” adjustments to
braking bias. Choose from just the proportioning valve, a
combination valve and pressure gauge or a combination
proportioning valve and distribution block with a builtin brake lamp switch. These valves are great for race
cars, tow vehicles or any car that requires specialized
and adjustable brake pressure bias.
Proportioning Valve Only
A0707 black anodized finish .............. 44.99 ea
Proportioning Valve and Pressure Gauge
A0707E black aondized finish .............. 64.99 ea
Proportioning Valve and Distribution Block
A0730 black anodized finish .............. 119.99 ea
A0730P polished finish ........................ 134.99 ea
1955-57 Treadle-Vac
Plunger Rod Shoulder Bolt
Reproduction plunger rod shoulder bolt for 1955-57
models with Treadle-Vac power brake unit. Connects
the Treadle-Vac plunger rod to the pedal assembly.
TF500109 1955-57 ................................. 18.99 ea
1955-57 Treadle-Vac
Power Brake Vacuum Hose Clamps
Master Cylinder Push Rod Set
This set will come in handy when rebuilding your
master cylinder and power booster on your power brake
system. Includes the plastic boot, two push pins (one
for a shallow master cylinder, one for a deep master
cylinder) and the attaching clevis.
PBK10 .................................................. 19.99 set
Reproduction 5/8" vacuum hose clamps for 1955-57
models with Treadle-Vac power brake unit. Original
style 5/8" Corbin clamps.
TF500112 1955-57 ................................ 4.99 kit
Proportioning Valve
Precision proportioning from 100 to 1,000 PSI. At full
release, valve is capable of up to 57% reduction in line
pressure. The new smaller body accommodates easy
mounting in a variety of locations in conjunction with
two .25" diameter holes on 1.00" centers. Standard
1/8"-27 NPT inlet and outlet ports and two 1/8"-27
NPT to 3/8"-24 inverted flare brake line adapters
included makes installation simple.
2608419 knob style prop valve .............
236
41.99 ea
Electronic Vacuum Pump Set
Universal Adjustable Pushrod Set
A great service set! Includes adapters for 10 common
pushrod configurations.
A1726
.................................................. 54.99 set
It takes 16" of Hg vacuum to properly operate your
vehicle’s power brake booster. Sometimes, high
performance engines don’t create enough vacuum to
operate the booster, making it more difficult to stop.
This vacuum pump will supply the booster with the
needed vacuum so your brakes will function properly.
VP28146 vacuum pump set ................. 279.99 set
1955-57 Brake Drums
These brake drums are
manufactured for
consistent strength,
performance and
reduced noise.
For vehicles
equipped with
drum brake
systems, these
replacements
are the best in the
industry.
1955-57 Brake Adjuster Hole Cover
Reproduction brake adjuster hole covers for 195557 models. Replace your missing or rusted brake
adjuster hole covers with these reproduction pieces.
Manufactured from metal as original.
BH400112 1955-57 ................................. 3.99 set
Note: Not for use with
metallic linings.
BH400101
1955-57 Brake Hardware
These complete sets come with all necessary hardware
to service your original style brakes properly,
including hold down springs, return springs and all
the miscellaneous hardware needed to get your brakes
working their best.
Brake Shoe Return Springs
TF500066 1955-57 front and rear ...... 9.99 set
Brake Adjusting Screw
TF500075 1955-57 front and rear ...... 6.99 ea
Hardware Kit without Adjusters
TF500114 1955-57 front or rear ........ 11.99 set
Hardware Kit with Adjusters
BH400101 1955-57 front and rear ...... 54.99 set
BH400102 1955-57 front only............ 29.99 set
BH400103 1955-57 rear only ............. 29.99 set
CB2016 1955-57 .................................... 29.99 ea
Brake Adjusting Hole Cover
Brake adjusting hole cover is
for use on 1955-57 models.
Original GM. 4 required.
G5194 1955-57 ...................................
3.99 ea
Wheel cylinder french lock washer.
Front only. Also used with front disc
brakes.
TF500181 1955-57 .................................
1955-57 Brake Cable Clips
Parking brake cable clips for 1955-57 models. Replace
your missing or rusted brake cable clips with these
fine reproductions. Attaches parking brake cable. 1
pair required per vehicle.
BH400113 1955-57 ................................. 5.99 pr
Wheel Cylinder
French Lock Washer
1.19 ea
1955-57 Parking Brake Spreader Bar
Reproduction parking brake spreader bar for 1955-57
models. Mounts inside the brake drum. Two required
per vehicle.
BRS001
1955-57 ................................. 9.99 ea
Brake Drum Anti-Vibration Spring
H2310
Save time adjusting brakes by installing this conversion
set for 1955-57 Chevrolet models. This set converts
manually adjusted brakes to self-adjusting brakes.
H2311
1955-57 front ......................... 47.99 set
H2312 1955-57 rear........................... 47.99 set
H2310 1955-57 front and rear ........... 79.99 set
TF500077
1955-57 Brake Shoe Guide Plate
Replacement brake shoe guide plate for all 1955-57
models equipped with drum brakes.
BH400116 1955-57 ................................. 5.99 ea
Brake Caliper/Brake Drum Paint System Set
WC13387
1955-57 Drum Brake Wheel Cylinders
These wheel cylinders match the design of your
vehicle’s original equipment. They are built for long
service life and feature the highest quality components
for superior resistance to heat, corrosion and leakage.
These wheel cylinders deliver consistent, safe, and
reliable performance.
Front Wheel Cylinders
WC20932 1955-57 1-1⁄8" LH .............. 11.99 ea
WC20933 1955-57 1-1⁄8" RH ............. 11.99 ea
Rear Wheel Cylinders
WC13387 1955-57 1"
LH .............. 7.99 ea
WC13388 1955-57 1"
RH ............. 7.99 ea
Rear Drum Brake Shoes
These rear brake shoes are designed to provide the best
overall performance for everyday driving conditions.
These brake shoes have been specially manufactured
to eliminate chatter and rear wheel lock-up. All brake
shoes are recoined to provide correct shoe-to-drum
contact, are riveted or bonded and will provide the
highest possible shear strength.
Front Brake Shoes
CB2036B 1955-57 6 & 8 cyl, 11" x 2" . 16.99 set
Rear Brake Shoes
CB2100
1955-57 11" x 1.75" ............. 24.99 set
Make your brakes stand out and enhance their
appearance by painting them. This ultra-protective 2
component paint system is the most complete brake
paint set available anywhere! Offering easy brush-on
application, high gloss finish and the highest heat
resistance on the market (up to 950°F), why use
anything else? Includes two part paint system, brake
caliper cleaner, brush and mixing stick. Available in
11 colors: red, yellow, blue, gray, black, purple, green,
white, gold, orange or pink. Contains enough paint for
4 large calipers or 2 brake drums.
G22160
specify color ........................ 39.99 set
237
1955-57 Self Adjusting Conversion Sets
Reproduction anti-vibration springs for all 1955-57
models equipped with factory drum brakes. This spring
fits in the groove around 11" brake drums.
H2316
1955-57 ................................... 12.99 ea
Brake Line Sets
Manufactured using a precision process that reproduces
the exact bends of the factory equipment
lines. Each set is clearly labeled for
convenience, pre-fit for ease of
installation, and is machine double-flared
for a safe, no-leak fit. Applications are
available for all 1955-57 models in your
choice of galvanized steel or stainless
steel.
Note: Front to rear brake lines shipped double oversize.
Available in stainless steel or original material.
All lines feature correct color coded fittings.
All lines have been pre-fitted for easy installation.
Each line is machine double flared for a safe, no leak fit.
All lines are clearly labeled for your convenience.
Reproduced with the discriminating restorer in mind.
BKT5601
1955-57 Brake Line Sets
BKT5501
BKT5502
BKT5601
BKT5602
OEM Material Front Brake Line Sets
1955
manual drum brakes
4 piece ...................
1955
power drum brakes
4 piece ...................
1956-57
manual drum brakes
4 piece ...................
1956-57
power drum brakes
4 piece ...................
45.99
45.99
45.99
45.99
set
set
set
set
BKT5501S
BKT5502S
BKT5601S
BKT5602S
OEM Material Front to Rear Brake Lines
I
BIN5501
BIN5502
BIN5601
BIN5602
BIN5704
1955
1955
1956-57
1956-57
1957
single exhaust
dual exhaust
single exhaust
dual exhaust
4 door wagon
59.99
59.99
59.99
59.99
set
set
set
set
Stainless Steel Front to Rear Brake Lines
OS2
1 piece ...................
1 piece ...................
1 piece ...................
1 piece ...................
1 piece ...................
Stainless Steel Front Brake Line
Sets
BKT5601
1955
manual drum brakes
4 piece ...................
1955
power drum brakes
4 piece ...................
1956-57
manual drum brakes
4 piece ...................
1956-57
power drum brakes
4 piece ...................
29.99
49.99
29.99
29.99
29.99
ea
ea
ea
ea
ea
BIN5501S
BIN5502S
BIN5601S
BIN5602S
BIN5704S
1955
1955
1956-57
1956-57
1957
single exhaust
dual exhaust
single exhaust
dual exhaust
4 door wagon
OS2
1 piece ...................
1 piece ...................
1 piece ...................
1 piece ...................
1 piece ...................
49.99
49.99
49.99
49.99
49.99
ea
ea
ea
ea
ea
OEM Material Front to Rear Brake Lines w/Disc Brake Conversion
Stainless Steel Front to Rear Brake Lines w/Disc Brake Conversion
OS2
BIN5601
BIN5602
1955-57
single exhaust
1 piece ................... 29.99
1955-57
dual exhaust
1 piece ................... 29.99
OEM Material Rear Axle Brake Lines
BRA5501 1955-57
all cars
2 piece ................... 24.99
BRA55RD 1955-57
rear disc
2 piece ................... 24.99
ea
ea
pr
pr
BIN5601S 1955-57
single exhaust
1 piece ...................
BIN5602S 1955-57
dual exhaust
1 piece ...................
Stainless Steel Rear Axle Brake Lines
BRA5501S 1955-57
all cars
2 piece ...................
BRA55RDS 1955-57
rear disc
2 piece ...................
OS2
49.99 ea
49.99 ea
34.99 pr
34.99 pr
TR103103
TR103104
1955-57 Hydraulic Brake Flex Hoses
These high-quality reproduction brake flex hoses are just the thing to complete your
brake system rebuild! By far the most original reproductions on the market, all hoses
are produced with correct original style fittings and are plated in the proper gold
cadmium finish. These extra-durable hoses are produced using D.O.T. approved
brake fluid resistant ribbed hoses. Also includes the correct flex hose clip attached
directly to the hose. Available in original style rubber or braided stainless steel.
Front Brake Hoses
TR103103 1955-57 rubber ............................................................... 5.99 ea
TR103104 1955-57 stainless steel ................................................... 27.99 ea
Rear Brake Hoses
TR103105 1955-57 rubber ............................................................... 7.99 ea
TR103106 1955-57 stainless steel ................................................... 28.99 ea
238
Brake Lines . Brake Hoses
Wilwood Stainless Steel Braided Flex Lines
Wilwood’s stainless steel braided flex line sets are manufactured with the highest
standards of quality. These flex line sets are required to complete the installation
of a Wilwood front brake set. Set includes two 18" flex lines with 3/8"-24 chassis
fitting, two horseshoe clips and fitting adapters.
Universal Flex Line Sets
2207699
brake lines - 16" .................................................................
2208307
brake lines - 18" .................................................................
2206471
18" flex line set with 7/16-24 chassis fitting......................
2206746
14" flex line set with 10 mm-1.0 chassis fitting.................
2206856
18" flex line set with 10 mm-1.0 chassis fitting.................
64.99
64.99
74.99
74.99
74.99
set
set
set
set
set
Brake Line & Hose Parts
2206956
2206412
BH400104
Front Disc Brake Conversion Line Kits
Brake line sets for use when converting from drum
brakes to disc brakes. Each line is bent to fit correctly
with a dual master cylinder (sold separately) and is
available for both manual and power brakes. Use with
PV71K or PV72K proportioning valve set. Available
in OE material or long-lasting stainless steel. Each
set includes 5 pieces.
Power Disc Brakes
BKT56DC
1955-57 OE material... 69.99 set
BKT56DCSS 1955-57 stainless steel 104.99 set
Manual Disc Brakes
BKT57DC
1955-57 OE material... 69.99 set
BKT57DCSS 1955-57 stainless steel 104.99 set
2206410
2206415
1955-57 Brake Distribution Block
Reproduction distribution blocks for 1955-57 models.
These blocks mount to the frame and are often missing
or discarded with old lines. Exact reproductions with
the correct size, shape and thickness.
BH400104 1955-57 rear housing ......... 29.99 ea
BH400105 1955
front left ............... 29.99 ea
BH400106 1955
front right ............. 29.99 ea
BH400107 1956-57 front left ............... 29.99 ea
BH400108 1956-57 front right ............. 29.99 ea
2206457
2206413
2206890
2200628
Brake Line Fittings
Wilwood’s brake line fittings are manufactured to high
quality standards and are available in various sizes
and configurations.
1955-57 Brake Line Bracket
1955 Front Brake Line Frame Clips
8.99 ea
19.99 ea
10.99 ea
13.99
10.99
19.99
10.99
ea
ea
ea
ea
8.99 set
Reproduction front brake line frame clips for 1955
models. Fits standard or power brakes. Includes 3 clips
and 2 bolts for mounting 1/4" and 3/16" lines to frame.
BH400109 1955.................................... 3.99 set
Brake and Fuel Line Retainer Clip Sets
1955-57 Front Brake Line Firewall Clip
Universal Weld-On Brake Line Bracket Set
Brackets and clips to mount rubber, nylon or stainless
steel lines to the suspension or frame. Bolt-on or weldon for easy installation.
393737 brake line brackets ................... 19.99 set
Reproduction master cylinder line to firewall brake
line clip for 1955-57 models with power brakes. Holds
master cylinder line to firewall.
BH400111 1955-57 .............................. 4.99 ea
BSA14
Metal Brake And Fuel Line Spiral Armor
1955-57 Front Brake Hose Clips
10' roll of replacement armor for brake and fuel lines
where extra protection from moving parts is required.
BSA13
3⁄16" 10 ft. ........................ 19.99 ea
BSA14
1⁄4"
10 ft. ........................ 19.99 ea
BSA16
5⁄16" 10 ft. ........................ 19.99 ea
BSA18
3⁄8"
10 ft. ........................ 21.99 ea
Reproduction brake line clips for 1955-57 models.
Each clip secures the brake line to the brackets on
the frame. Also secures brass brake distribution block
on the rear housing. Includes 4 clips per set. 1 set
required per vehicle.
BH400110 1955-57 .............................. 3.99 set
Reproduction brake and fuel line clip sets for lines
inside the frame for cars with factory single exhaust
or outside the frame for cars with dual exhaust such
as models with the Powerpack or high performance
package.
TF500073 1955-57 inside frame, 6 pc ... 24.99 set
TF500074 1955-57 outside frame, 7 pc . 27.99 set
High Performance Brake Fluid
Wilwood offers
two grades of high
performance brake
fluid. Hi-Temp° 570
has a maximum
dry boiling point
to withstand severe
heat in street and
track use. EXP 600
Plus has a maximum
dry boiling point of
626° developed for
extreme performance
under the high heat
and extreme pressure
of professional
motorsports. Both fluids are available in convenient
6 packs. Always add new fluid to a clean system.
EXP 600 Brake Fluid
2908478 case of 6 16.9 oz bottles ....... 109.99 cs
Hi-Tempº 570 Brake Fluid
2902210 case of 6 12 oz bottles .......... 47.99 cs
Brake Line Components
239
Brake line bracket for 1955-57 models with factory
dual exhaust and V8. Bolts to the inside of right rear
side of frame. Holds the long brake line and brake
hose that goes to rear end. Used with dual exhaust and
outside frame brake line. Hardware and clip included.
TF500184 1955-57 ................................. 34.99 ea
Caliper Fittings
2206956 straight-3 male to 1/8"-27 NPT male
2206412 45°-3 male to 1/8"-27 NPT male......
2206415 90°-3 male to 1/8"-27 NPT male......
Frame Fittings
2206410 3/8"-24 inverted flare to-3 male .......
2206457 7/16"-24 inverted flare to-3 male .....
2206890 10 mm-1.0 bubble flare to-3 male ....
2206413 10 mm-1.0 inverted flare to-3 male ..
3/8"-24 IF to 1/8"-27 NPT Adapter
2200628 female IF to male NPT ..................
Brake Tools
Speed And
COMFORT For
A Demanding
Job!
Adjustable seat provides the support,
leaving your feet free to control your
movement
Floating, attached
kneepads eliminate direct pressure on knees,
circulation problems
Removable tray holds
tools, small parts, etc.
I
Working in a kneeling
position on concrete takes a
toll on your body, especially
your legs. knees, feet
and back! This new tool
approaches working on
your knees in a whole new
way. Instead of supporting
yourself on your heels, the
seat provides the support,
while taking pressure off
knees, ankles and toes.
This leaves your feet free
to control your movement.
Aluminum frame is elevated on 2" casters to
The caster wheels allow you
eliminate pressure on toes, ankles and knees
to roll when you need to
move instead of crawling,
crouching and bouncing on your knees.
The attached floating kneepads allow
your knees to rest, eliminating the
direct pressure that causes circulation
problems pain and discomfort.
Attached to the tool is a handy 7" x
15" removable tray which is great for
holding tools, fasteners, small parts,
etc. Weighing only 8 lbs., the tool is
manufactured from 1/8" thick industrial
strength aluminum. The comfortable
webspring seat is covered with a soft
leather-like cover and adjusts vertically 11.5" to 15.5" in height. It also adjusts 3" horizontally and tilts for
your utmost comfort.
X99115
........................................................................................................................................ 197.99 ea
Disc Brake Pad Spreader
This unique tool makes changing disc brake pads
simpler. The tool compresses the disc brake piston
for easier installation of pads.
Y24400 .................................................. 9.99 ea
Y25750
Y24300
Speedy Brake Pad Spreader
The pistol grip ratcheting action and the fast acting
plunger compress disc brake pistons in seconds. This
makes brake pad replacement a snap.
Y24300 single piston pad spreader ........ 39.99 ea
Y25750 dual piston pad spreader ........... 50.99 ea
Bendix Drum Brake Spring Tool
Brake Cylinder Hone
Hones drum brake wheel cylinders and disc brake
calipers from 13/16" to 2-3/4" in diameter. Sleeve
makes insertion in cylinder easy and protects stones
when not in use. Use with variable speed drill.
X265
3/8" hex .................................... 14.99 ea
X266
stone set for drum brakes (3).... 4.99 set
X2004 stone set for disc brakes (3)...... 5.99 set
Removes and installs return springs on Bendix drum
brakes. Place socket end over spring anchor and twist
to remove. Hook notched end through spring and over
the post, lift to install.
X280
................................................
8.99 ea
Large Tubing Bender
Large version of the brake line bender for use on fuel,
transmission and power steering lines.
V025700 ................................................ 59.99 ea
Brake Spring Pliers
Double ended tool for removing and installing brake
springs.
X298
................................................ 19.99 ea
Disc Brake Hone
Special abrasive pads polish the cylinder without
cutting. Controlled pressure, three abrasives, and
flexible driver give good stability and speed. Stones
are 1" long. Range 1-1/2" to 3-1/8".
Y10400 hone .......................................... 16.99 ea
Y10490 set of replacement abrasives .... 5.99 set
240
Brake Tools
Tubing Bender
Brake Adjustment Tool
Simplify star wheel adjustment on drum brakes by
inserting this tool through the slot in the drum backing
plate. A different angle at each end adapts to many
various models.
Y50700 brake adjustment tool .............
4.99 ea
Bend 3/16", 1/4", 5/16" and 3/8" copper or steel
tubing. This tool makes tight bends without the tube
collapsing. Roller adapters are included for each tubing
size. Place tubing between the adapter and studs and
squeeze the handles to bend.
X2189
.................................................. 27.99 ea
Brake Tools
Y10950
Y10900
Brake Bleeder Wrenches
Brake bleeder wrenches will ensure that you don’t strip the bleeder nuts on your
calipers or cylinders. Check size before ordering.
Y10950
1/4" x 3/8" .......................................................................... 7.99 ea
Y10900
5/16" x 3/8" ........................................................................ 7.99 ea
Y44800
One Man Brake Bleeder
Loosen the bleeder screw and fill with brake fluid. Pump the brakes until the hose
is free of bubbles. Everything is included to quickly bleed brakes with no mess.
Plastic bottle collects discharged fluids. Complete instructions included.
Y19200
........................................................................................... 9.99 set
Y46750
Brake Spring Removal Tools
Two to choose from. The standard tool will remove springs that are set over a post.
The heavy duty will remove springs installed through a hole.
Y44800
heavy-duty (large brake springs) ....................................... 16.99 ea
Y46750
standard tool ...................................................................... 8.99 ea
04000
Mityvac Brake Bleeder
Double Flaring Tool Set
If your brake lines or fuel lines need to be flared, this is the right tool for you. This
set allows the user to make single or double SAE flares to exact dimensions. Great
item to keep in your tool box!
Y31310
double flaring tool set ........................................................ 44.99 set
Brake Pressure Gauge
Whenever a brake professional
is balancing a new brake
system for either street or
race applications he has to
use the best equipment. At
Classic Industries® we believe
in getting the job done right
the first time. With this brake
pressure gauge you will be
able to measure your braking pressure right at the caliper where it is the most
accurate. The gauge comes with the six most common fitting sizes to adapt this
versatile gauge right to the threaded bleeder port of either your caliper or drum
system. Get the correct brake balance with the best tool for the job.
A1704
........................................................................................... 45.99 set
Brake System Power Bleeder
Combination and Proportioning Valve Bleed Tool
Combination and Proportioning Valve Bleed Tool is designed to replace the warning
light switch (white plug) on the proportioning valve during the brake bleeding
process. After the bleeding process is finished, simply remove the tool and reinstall
the warning light switch. This item makes bleeding your brake system much easier.
Works with all popular non adjustable GM style combination valves; including the
proportioning valves used on disc brake conversions. Tool is designed to lock the
low pressure shut valve to allow fast and easy brake system bleeding. No need to
constantly remove low pressure switch and center the low pressure valve during
the brake bleeding process!
P19842
non adjustable GM style combination valve ..................... 7.99 ea
This is a simple, one person
operation with no external
power source needed. Includes
a precision pressure gauge for
safe operation and you can flush
the entire hydraulic system
without frequently refilling the
reservoir. This unit features a
large reservoir that holds up to 2
quarts of brake fluid. Complete
system includes reservoir with
gauge, hoses, fittings, instructions
as well as two adapters that will fit most GM master cylinders.
Bleeder
14227
bleeder w/universal adapters ............................................. 99.99 ea
1958-62 Adapter
1102
for threaded master cylinder .............................................. 36.99 ea
1992-96 Adapter
1108
for plastic twist-lock cap.................................................... 27.99 ea
Brake Tools
241
Universal Brake Caliper Bit Set
Nine sizes for brake caliper bolt applications. No more searching for the correct bit!
This handy set will cover a multitude of applications. Includes torx and hex head bits.
Y29150
........................................................................................... 24.99 set
The Mityvac Brake Bleeding Set may be used on virtually all hydraulic systems
as well as most ABS systems. It’s a rugged, low cost professional tool which
enables one person to efficiently bleed brakes, clutches or other hydraulic systems.
Choose from our sturdy polymer plastic bleeder, designed for occasional use by
the do-it-yourselfer, or step up to the heavy duty metal bleeder designed for the
professional mechanic.
04000
“professional” model ......................................................... 99.99 set
06820
“do-it-yourselfer” model.................................................... 44.99 set
Early Style Rally Wheel Kits
Save big when replacing your wheels with a Rally Wheel Kit from
Classic Industries®. We offer a wide selection of kits
including uniform size or mixed sizes. Each kit includes
a complete set of four Rally wheels, wheel caps,
trim rings and lug nuts. These kits will fit any
1955-57 Chevrolet model with a 5 lug x 4-3/4"
bolt pattern.
Standard Rally Wheel Kit
These standard Rally wheel kits include center cap
ornaments of the type originally used on models
without disc brakes. The ornaments feature the wording
“Chevrolet Motor Division” encircling a Bow Tie.
14" X 6" Rally Wheel Kit
4 14" x 6" Rally Wheels
4 14" x 6" Trim Rings
4 Center Cap Bases
4 Standard Ornaments
16 Ornament Screws
20 Wheel Lug Nuts
RWK01
.......................................... 579.99 kit
E!
FRE
Closeup
Closeup
ems
lve St
& Va of any
cks
hase Kit!
el Lo
Whe ith purcWheel
W
Rally
I
14" x 7" Rally Wheel Kit
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK02
.......................................... 579.99 kit
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK03
.......................................... 571.99 kit
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK04
.......................................... 615.99 kit
Standard Rally Wheel Cap
Disc Brake Rally Wheel Cap
Disc Brake Rally Kit
Disc Brake Rally Kit
These kits include center cap ornaments of the type
originally used on models with disc brakes. The
ornaments feature the wording “Chevrolet Motor
Division” & “Disc Brakes” encircling the Bow Tie.
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK19 ................................................ 492.99 kit
15" X 7" And 15" X 8"
Mixed Size Rally Wheel Kit
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK20 ................................................ 492.99 kit
2 15" x 7" Rally Wheels (front)
2 15" x 8" Rally Wheels (rear)
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK17
.......................................... 593.99 kit
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK21 ................................................ 485.99 kit
242
Rally Wheel Kits
This kit includes center cap ornaments of the type
4 Center Cap Bases
16 Ornament Screws
20 Wheel Lug Nuts
RWK22 ................................................ 528.99 kit
15" X 7" And 15" X 8"
Mixed Size Rally Wheel Kit
This kit includes center cap ornaments of the type
2 15" x 7" Rally Wheels (front)
2 15" x 8" Rally Wheels (rear)
4 Center Cap Ornaments
4 Rally Wheel Center Caps
20 Wheel Lug Nuts
16 Ornament Screws
RWK18 ................................................ 507.99 kit
Late Style Rally Wheel Kits
Buy the Kit and Save
up to 28%!
Save big when replacing
your wheels with a
Rally Wheel Kit from
Classic Industries®. We
offer a wide selection
of kits including uniform
size or mixed sizes. Each kit
includes a complete set of four
Rally wheels, wheel caps, trim rings
and lug nuts. These kits fit any 1955-57
Chevrolet model with a 5 lug x 4-3/4" bolt
pattern.
Closeup
Closeup
FREE!
Valve Stems
Wheel Locks &
of any
With purchase Kit!
Rally Wheel
Plain Center Cap
Chevrolet Motor Division Center Cap
Rally Wheel Kits with Plain Center Caps
Rally Wheel Kits w/Chevrolet Motor Division Center Caps
4
4
RWK25
14" x 6" Rally Wheels
Rally Wheel Hub Caps
4
20
14" x 6" Trim Rings
Wheel Lug Nuts
plain caps ........................................................................... 510.99 kit
4
4
RWK05
4
4
RWK27
4
20
14" x 7" Trim Rings
Wheel Lug Nuts
plain caps ........................................................................... 510.99 kit
RWK29
4
20
15" x 7" Trim Rings
Wheel Lug Nuts
plain caps ........................................................................... 503.99 kit
RWK06
RWK31
4
20
15" x 8" Trim Rings
Wheel Lug Nuts
plain caps ........................................................................... 546.99 kit
RWK07
RWK35
15" x 7" Rally Wheels (front)
15" x 8" Rally Wheels (rear)
2
2
20
15" x 7" Trim Rings
15" x 8" Trim Rings
Wheel Lug Nuts
plain caps ........................................................................... 525.99 kit
14" x 7" Trim Rings
Wheel Lug Nuts
4
20
15" x 7" Trim Rings
Wheel Lug Nuts
“Chevrolet Motor Divison” caps ....................................... 622.99 kit
4
4
RWK08
15" X 7" And 15" X 8" Mixed Size Rally Wheel Ki
2
2
4
4
20
4
4
4
4
14" x 6" Trim Rings
Wheel Lug Nuts
4
4
4
4
4
20
4
20
15" x 8" Trim Rings
Wheel Lug Nuts
15" X 7" And 15" X 8" Mixed Size Rally Wheel Kit
2
2
4
15" x 7" Rally Wheels (front)
15" x 8" Rally Wheels (rear)
RWK14
2
2
20
15" x 7" Trim Rings
15" x 8" Trim Rings
Wheel Lug Nuts
Rally Wheel Kits
243
Rally Wheels
Reproduction Painted Rally Wheels
Replace a rusty, pitted or missing wheel
with a new reproduction Rally wheel.
Each wheel comes beautifully finished
in original silver (powder coated) color.
These wheels come in 5 x 4-3/4" bolt
pattern and are available in a variety of sizes
to fit your specific needs. Center caps and trim
rings are sold separately.
Rally Wheel Cap Locks
Item #
DK14X6
DK14X7
DK14X8B
DK15X6
DK15X7
DK15X8A
DK15X10
Size
14" x 6"
14" x 7"
14" x 8"
15" x 6"
15" x 7"
15" x 8"
15" x 10"
Offset
6 mm
-3 mm
-19 mm
7 mm
6 mm
-6 mm
-32 mm
Rear Spacing
3-3/4" .....................................
4-1/8" .....................................
3-3/4" .....................................
3-3/4" .....................................
4-1/4" .....................................
4-1/4" .....................................
4-1/4" .....................................
79.99 ea
79.99 ea
84.99 ea
79.99 ea
79.99 ea
89.99 ea
109.99 ea
Rally wheel locks are made from the
highest quality materials, to keep your
caps where they belong... on your
Chevrolet. They install easily to your
wheel without any modification and
cannot be detected. Will fit early and
late style Rally wheel caps. Sold in
sets of four.
RWL67 early .................... 44.99 set
RWL68 late ...................... 44.99 set
Rally Wheel Ornament Screws
Special factory screws designed
for early and late style Rally wheel
ornaments. Holds the ornament or
center cap to the hub cap retainer.
3824195 individual .......... 1.49 ea
R306
16 piece set........ 14.99 set
Reproduction Painted Rally Wheels - Buy A Set Of Four & Save $$!
Save when purchasing a complete set of 4 Rally wheels! Each kit is beautifully
finished in Argent silver powder coat. Wheel trim rings and caps sold separately.
Note: Special shipping rates do apply. Shipped overweight. Discount exempt.
Item #
R14X6S
R14X7S
R14X8S
R15X6S
R15X7S
R15X8AS
Size
14" x 6"
14" x 7"
14" x 8"
15" x 6"
15" x 7"
15" x 8"
Offset
6 mm
-3 mm
-19 mm
7 mm
6 mm
-6 mm
Rear Spacing
3-3/4" .....................................
4-1/8" .....................................
3-3/4" .....................................
3-3/4" .....................................
4-1/4" .....................................
4-1/4" .....................................
287.99 set
287.99 set
303.99 set
287.99 set
287.99 set
323.99 set
Disc Brake
Rally Cap Ornaments
Reproduction hub cap ornament for
passenger cars with Rally wheels and
disc brakes. Note: Four screws are required
per ornament. Available separately.
3901715 individual ........... 14.95 ea
PR125 set of 4 ............... 53.99 kit
I
Rally Wheels In Brilliant Chrome!
Upgrade your vehicle’s stock
appearance with a beautiful set of
chrome reproduction Rally wheels.
These reproduction wheels come
in 5 x 4-3/4" bolt pattern and are
available in a variety of sizes to fit
your specific needs. Each wheel
comes with an aftermarket plain police
style center cap. For a more authentic
Chevrolet Rally wheel appearance, use
our Chevrolet rally wheel caps and trim
rings sold separately.
Item #
DK14X6C
DK14X7C
DK14X8BC
DK15X6C
DK15X7C
DK15X8AC
DK15X8BC
DK15X10C
DK16X7C
Size
14" x 6"
14" x 7"
14" x 8"
15" x 6"
15" x 7"
15" x 8"
15" x 8"
15" x 10"
16" x 7"
Offset
+6 mm
0 mm
-19 mm
7 mm
6 mm
-6 mm
-19 mm
-32 mm
0 mm
Rear Spacing
3-3/4" .....................................
4" ............................................
3-3/4" .....................................
3-3/4" .....................................
4-1/4" .....................................
4-1/4" .....................................
3-3/4" .....................................
4-1/4" .....................................
4" ............................................
Rally Wheel Ornament
89.99 ea
89.99 ea
99.99 ea
109.99 ea
119.99 ea
123.99 ea
139.99 ea
149.99 ea
141.99 ea
Correct hub cap ornament installed on
all Rally wheels without disc brakes.
Note: Four screws are required per ornament.
Available separately.
G7823
4 required ........... 19.99 ea
Reproduction Chrome Rally Wheels - Buy A Kit Of Four & Save $$!
Save when purchasing a complete set of 4 Rally wheels! Each kit is beautifully
finished in polished chrome. Each wheel comes with an aftermarket Each wheel
comes with an aftermarket plain police style center cap. For a more authentic
Chevrolet Rally wheel appearance, use our Chevrolet rally wheel caps and trim
rings sold separately.
Note: Special shipping rates do apply. Shipped overweight. Discount exempt.
Item #
R14X6C
R14X7C
R14X8C
R15X6C
R15X7C
R15X8AC
R15X8BC
244
Size
14" x 6"
14" x 7"
14" x 8"
15" x 6"
15" x 7"
15" x 8"
15" x 8"
Offset
+6 mm
0 mm
-19mm
7 mm
6 mm
-6 mm
-19 mm
Rear Spacing
3-3/4" .....................................
4" ............................................
3-3/4" .....................................
3-3/4" .....................................
4-1/4" .....................................
4-1/4" .....................................
3-3/4" .....................................
Rally Wheels
Rally Wheel Lug Nut Sets
Classic Industries® offers a lug nut set
for your Rally wheels. A perfect kit to
purchase if your lug nuts are stripped,
worn out or rusted. All sets include: 20
lug nuts, 4 valve stems, 4 wheel locks
and a key.
WK1
7/16"-20 thread ... 39.99 set
WK2
1/2"-20 thread ..... 39.99 set
323.99 set
323.99 set
359.99 set
395.99 set
431.99 set
446.99 set
503.99 set
Rally Wheel Hub Cap Dish
This is the Rally wheel center dish only.
Center ornament available separately.
WC3
reproduction ....... 22.95 ea
WC5
reproduction ....... 79.95 set
G7812 GM ..................... 99.99 ea
OER® Factory
Wheel Coatings
OER® factory
wheel coatings are
available so you
can achieve the
correct factory look
on the restoration
of your wheels.
Eliminates the need
for expensive custom
paint mixing and
greatly simplifies the
restoration process by
providing spray gun
results without the
hassle and mess of a
spray gun or the need
for an air compressor.
Note: Ships ground only.
No air shipment.
Rally Wheel Argent Silver
K89320 16 oz. can ........... 16.99 ea
K89321 case of six cans ... 89.99 cs
Rally Wheel Argent Silver/Green
K89325 16 oz. can ........... 16.99 ea
K89326 case of six cans ... 89.99 cs
Rally Wheel Accessories
A
B
F
G
D
H
I
Rally Wheel Center Caps
A. OE Style Rally Wheel Center Caps
Originally installed on all full size passenger cars with
Rally wheels. This cap is all you’ll need to replace the
center section. Each cap includes the chrome dish with
the ornament attached. This cap features the words
“Chevrolet Motor Division”
G7814
original GM ...................... 251.99 ea
WK10120 reproduction...................... 49.99 ea
B. Bow Tie Rally Wheel Center Caps
These Rally wheel derby center caps are a great
reproduction of the original. Features “Chevrolet
Motor Division” with a center Bow Tie. These caps
are a great way to dress up your vehicle. Available in a
tall style chrome cap. Sold individually or in a set of 4.
WK1012
tall derby cap (ea) ............. 49.99 ea
WR1012
tall derby cap (set of 4) ..... 179.99 set
C. Disc Brake Rally Wheel Center Caps
For models with disc brakes, these Rally wheel center
caps are a wonderful addition for your vehicle. The
center cap features the words “Chevrolet Motor
Division Disc Brakes” and a Bow Tie in the center.
Available in chrome or stainless steel. Sold individually
or in a set of 4.
WK1014C chrome, w/disc brake (ea) .... 19.95 ea
WR1014C chrome, w/disc brake (set of 4). 69.99 set
WK1014S stainless, w/disc brake (ea) .. 24.95 ea
WR1014S stainless, w/disc brake (set of 4) 89.99 set
D. Plain Rally Wheel Center Caps
These Rally wheel derby center caps are a great
reproduction of the original. Although the words
“Chevrolet Motor Division” are not featured, these
caps are a great way to dress up your vehicle. Available
in a short or tall style chrome cap. Sold individually
or in a set of 4.
WK1012A short derby cap (ea) .......... 29.95 ea
WR1012A short derby cap (set of 4) .. 107.99 set
WK1012NL tall derby cap (ea) ............. 29.95 ea
WR1012NL tall derby cap (set of 4) ..... 107.99 set
E. Economy Rally Wheel Center Caps
A good reproduction of the derby Rally wheel center
hub cap without the words “Chevrolet Motor Division”
or a center Bow Tie. Available single or in a set of 4.
Made of plastic.
WK1013
derby cap (ea) ................... 19.95 ea
WR1013
derby cap (set of 4) ........... 71.99 set
F. Spinner Rally Wheel Center Caps
A unique way to dress up your Rally wheels. Available
in chrome or stainless steel. Sold individually or in
a set of 4.
WK1018CR chrome, plain knock off .... 39.99 ea
WR1018CR chrome, plain knock off .... 39.99 ea
WK1018SR stainless, plain knock off .. 34.99 ea
WR1018SR stainless, plain knock off .. 34.99 ea
G. Baby Moon Rally Wheel Center Cap
Baby moon style Rally wheel center caps. Available
single or in a set of 4.
WK1008
chrome, baby moon .......... 14.99 ea
WR1008
chrome, baby moon .......... 53.99 set
H. Police Style Rally Wheel Center Caps with Bow Tie
Police-style hubcap, with Chevy Bow Tie in the
middle. Available in chrome or stainless steel. Sold
individually or in a set of 4.
WK1000C chrome, w/Bow Tie .......... 24.99 ea
WR1000C chrome, w/Bow Tie .......... 89.99 set
WK1000S stainless, w/Bow Tie ......... 29.99 ea
WR1000S stainless, w/Bow Tie ......... 107.99 set
I. Plain Police Style Rally Wheel Center Caps
Plain police-style hubcap. Available in chrome or
stainless steel. Sold individually or in a set of 4.
WK1002C chrome, plain .................... 19.99 ea
WR1002C chrome, plain .................... 71.99 set
WK1002S stainless, plain .................. 24.99 ea
WR1002S stainless, plain .................. 89.99 set
Wheel Accessories
245
E
C
Wheel Accessories
TF500115
TF500116
TF500192
TF500064
TF500118
1955-57 Hub Cap Decal Sheet
TF500119
1955-56 Reproduction Wheel Caps
TF500194
1955-57 OEM Style Steel Wheels
Original style steel wheels for 1955-57 models.
Designed to clear both disc and drum brakes. 14"
wheels feature dual bolt pattern to fit 5 x 4.5" or 5 x
4.75". Finished in bare steel, they are available with
dimples for full wheel covers or with nubs for small hub
caps. Wheels with 5" width feature 3.00" backspacing
while wheels with 6" width feature 4.00" backspacing.
Reproduction wheel caps for 1955-56 150, 210 and Bel
Air models. Small hub caps for 150 and 210 models
and full wheel covers feature original style painted
finish; white for 1955 models, black for 1956 models.
Small Hub Cap - 150/210
TF500115 1955
white..................... 69.99 ea
TF500116 1956
black ..................... 69.99 ea
Full Hub Cap - Bel Air
TF500118 1955
white..................... 118.99 ea
TF500119 1956
black ..................... 119.99 ea
I
Important: *Features dual bolt pattern. Hub caps must
be fitted before painting and wheels must be checked for
clearance of disc brake calipers.
Steel Wheels for Full Wheel Covers
TF500192 1955-56 15" x 5" ..............
TF500193* 1957
14" x 5" ..............
TF500194* 1957
14" x 6" ..............
Steel Wheels for Small Hub Caps
TF500195 1955-56 15" x 5" ..............
99.99 ea
99.99 ea
99.99 ea
99.99 ea
1957 Wheel Spinners
Reproduction of the
complete accessory
wheel spinner for
1957 passenger
car models with
full wheel covers.
These spinners
have a beautiful
chrome finish with
the correct red Bow
Tie crest emblem
center.
IM5871R 1957 .................................... 164.99 set
Each decal sheet is made of quality die-cut vinyl. One
sheet required per hub cap.
TF500063 1955 white......................... 9.99 ea
TF500064 1956 black ......................... 9.99 ea
TF500065 1957 black ......................... 8.99 ea
Police Style Smoothie
Wheel Center Caps
This cap is made
exclusively for smoothie
wheels. Features
concentric grooves and
a highly reflective finish.
Sold individually or in a
set of 4.
Note: Will not fit Rally
wheels.
Chrome Police Style Caps
WK1003C smoothie wheel cap ............. 19.99 ea
WR1003C wheel cap set - 4 .................. 71.99 set
TF500117
TF500120
1957 Replacement Wheel Caps
Replacement wheel caps for 1957 150, 210 and Bel
Air models. Available as a small hub cap for 150 and
210 models or a full wheel cover for Bel Air models.
Does not include the crest as original. Painted in
original black finish.
Small Hub Cap - 150/210
TF500117 1957
black ..................... 49.99 ea
Full Hub Caps - Bel Air
TF500120 1957
black ..................... 109.99 ea
Baby Moon Center Caps
For Smoothie Wheels
Baby moon-style center
cap made exclusively
for smoothie wheels.
Features highly reflective
chrome finish and
smooth face. Available
individually or in a set
of 4.
Note: Will not fit Rally
wheels.
WK1009
WR1009
chrome, baby moon cap......... 14.99 ea
chrome, baby moon cap - 4 ... 53.99 set
7/16"-20 x 1-1/4" Wheel Stud
Reproduction wheel stud for all 1955-57 front wheels
and rear wheels. Used to hold the wheel onto the axle.
A14228
1955-57 ............................... 3.49 ea
1956 Wire Wheel Covers
CM1405
CM1405B
1957 Spinner Emblem
Bow Tie emblem designed for 1957 style wheel
spinners. Available in red or black.
CM1405
1957 red
4 required ... 17.99 ea
CM1405B 1957 black 4 required ... 24.99 ea
246
Wheel Accessories
Stainless steel wire wheel cover for 1956 models.
Grab some attention with this accessory. This steel
wire wheel cover is a beautiful, show quality piece
and comes complete with mounting hardware.
Wire Wheel Covers
TF500121 1956 wheel cover............. 144.99 ea
Wire Wheel Cover Clips
TF500122 1956 1 wheel - set of 5 .... 26.99 set
TF500123 1956 4 wheels - set of 20 . 99.99 set
1955-57 Standard 7/16"-20 Lug Nuts
Reproduction or genuine GM
7/16"-20 standard lug nuts for
all passenger cars without SS
wheels or aluminum wheels.
G8232
WL700101
1955-57
1955-57
original GM .....
reproduction.....
2.25 ea
.99 ea
Rally Wheel Trim Rings
Reproduction Stainless
Steel Round Lip Trim Rings
Excellent quality reproduction wheel trim rings. Classic
Industries® offers Rally wheel trim rings at a greatly
reduced price. Get a stylish look with these stainless
steel trim rings. Sold individually or in set of 4.
Note: *For OE wheels only. **For reproduction wheels
only.
Note: *For OE wheels only. **For reproduction wheels
only.
Individual Trim Rings
1-1/2" Deep
TK3005
14" x 6", 14" x 7" ...............
TK3007*
15" x 5", 15" x 6", 15" x 7"
2-1/2" Deep
TK3009*
15" x 8", 15" x 10" .............
TK3009A** 15" x 8", 15" x 10" .............
Trim Ring Kits
1-1/2" Deep
TR3005
14" x 6", 14" x 7" ...............
TR3007*
15" x 5", 15" x 6", 15" x 7"
2-1/2" Deep
TR3009*
15" x 8", 15" x 10" .............
TR3009A** 15" x 8", 15" x 10" .............
19.99 ea
17.99 ea
Reproduction Bow Tie Trim Ring Sets
Reproduction stainless steel Bow Tie trim rings for
Rally wheels. Each trim ring features 4 Bow Ties
stamped on each ring. Sold in sets of 4.
TF500068 15" x 7" ............................. 114.99 set
TF500069 15" x 8" ............................. 114.99 set
19.99 ea
24.99 ea
59.99 kit
59.99 kit
69.99 kit
69.99 kit
K24011
McGard® Rally Wheel Lock Set
Protect your valuable rally wheels and tires with these
excellent quality wheel locks. Each lock withstands
hammers, chisels, and wrenches. Narrow-groove key
patterns and specially coded keys provide maximum
security. No moving parts to damage or corrode. Set
of four. One per wheel. Lock cap sets are to cap the
cone seat-open end style locking lug nuts. Set of four.
One per wheel lock.
K24010 1/2" - 20 stud ........................... 21.99 set
K24011 7/16" - 20 thread...................... 21.99 set
70006
lock caps chrome ..................... 4.99 set
70005
lock caps black ........................ 3.49 set
Reproduction Stainless
Steel Step Lip Trim Rings
Excellent quality reproductions of the Rally wheel trim
rings at a greatly reduced price. Get the same OEM
look with these fine reproductions.
Note: For reproduction wheels only.
2-1/2" Deep
TK3115
15" x 7" ..............................
3" Deep
475020R
14" x 7" ..............................
Trim Ring Kits
2-3/4" Deep
TR3115
15 x 7" ................................
3" Deep
K475020R 14" x 7" ..............................
24.99 ea
24.99 ea
89.99 kit
79.99 kit
K64000
Original GM Stainless
Steel Rally Wheel Trim Rings
McGard® Lug Nut & Locks
Original GM trim rings for Rally wheels. Each ring is
produced with bright chrome finish. Due to changes
in Federal Safety Regulations, attachment clips may
vary in location from original stock trim rings but does
not effect appearance once installed.
G6580 14" x 6" .................................. 164.99 ea
G6581 14" x 7" .................................. 167.99 ea
G8241 15" x 8" .................................. 247.99 ea
Each nut is identified by size directly on the head,
chrome plated and case hardened completely
through. The thread strength meets or exceeds OEM
specifications. Sets include 4 locks and 16 nuts.
K64000 1/2"-20 thread-13/16" hex-chrome 53.99 kit
Rally Wheel Trim Rings
247
1-1/2" Deep
TK3000
14" x 6", 14" x 7" ............. 21.99 ea
TK3015*
15" x 5", 15" x 6", 15" x 7" 21.99 ea
TK3016**
16" x 7", 16" x 8" ............. 24.99 ea
2" Deep
TK3125**
15" x 7" ............................ 19.95 ea
2-1/2" Deep
TK3002*
15" x 8", 15" x 10" ........... 24.95 ea
TK3002A** 15" x 8", 15" x 10" ........... 21.99 ea
Trim Ring Kits
1-1/2" Deep
TR3000
14" x 6", 14" x 7" ............. 79.99 kit
TR3015*
15" x 5", 15" x 6", 15" x 7" 79.99 kit
TR3016**
16" x 7", 16" x 8" ............. 89.99 kit
2" Deep
TR3125**
15" x 7" ............................ 69.99 kit
K9796696R 15" x 7" ............................ 107.99 kit
2-1/2" Deep
TR3002*
15" x 8", 15" x 10" ........... 89.95 kit
TR3002A
15" x 8", 15" x 10" ........... 89.95 kit
Reproduction Chrome Round Lip Trim Rings
Excellent quality reproduction wheel trim rings. Classic
Industries® offers Rally wheel trim rings at a greatly
reduced price. Get a stylish look with thesechrome
trim rings. Sold individually or in a set of 4.
Rocket Racing Wheels
RB177425G
RB177425S
I
Rocket “Booster” Wheels
Get ready to blast off with the Rocket Racing "Booster" wheels! This 1-piece wheel
is purpose-built to deliver classic-inspired style and performance for the finest muscle
cars, pro-touring and street machines at a reasonable price. Designed specifically for
the offsets of hot rods and muscle cars, each booster is precision-crafted from A356
aluminum and topped off with a vintage style aluminum o-ring center cap. Available
with painted gray center and machined outer lip, in full chrome, in hypershot finish
or with hyper silver center section and machined outer lip. Manufactured with cutting
edge alloys, the strictest quality standards and a gorgeous classic design, the Booster
is sure to get you into the stratosphere at the next car show.
5 x 4.75" Lug Pattern - Gray Painted with Machined Outer
RB177425G 17" x 7" 4.25" backspacing ..................................... 239.99 ea
RB208525G 20" x 8.5" 5.25" backspacing ..................................... 379.99 ea
5 x 4.75" Lug Pattern - Hyper Silver with Machined Outer
RB177425S
17" x 7" 4.25" backspacing ..................................... 239.99 ea
RB178450S
17" x 8" 4.50" backspacing ..................................... 249.99 ea
RB187450S
18" x 7" 4.50" backspacing ..................................... 269.99 ea
RB188475S
18" x 8" 4.75" backspacing ..................................... 279.99 ea
RB189525S
18" x 9" 5.25" backspacing ..................................... 284.99 ea
RB208525S
20" x 8.5" 5.25" backspacing ..................................... 379.99 ea
5 x 4.75" Lug Pattern - All Chrome
RB177425C 17" x 7" 4.25" backspacing ..................................... 339.99 ea
RB208525C 20" x 8.5" 5.25" backspacing ..................................... 419.99 ea
5 x 4.75" Lug Pattern - Hypershot
RB177425T
17" x 7" 4.25" backspacing ..................................... 239.99 ea
RB178450T
17" x 8" 4.50" backspacing ..................................... 249.99 ea
RB187450T
18" x 7" 4.50" backspacing ..................................... 269.99 ea
RB188475T
18" x 8" 4.75" backspacing ..................................... 279.99 ea
RB189525T
18" x 9" 5.25" backspacing ..................................... 284.99 ea
RB208525T
20" x 8.5" 5.25" backspacing ..................................... 379.99 ea
RG156350G
RG156350P
Rocket “Igniter” Wheels
At the dawn of the hot rod age, a handful of innovative gear heads in hopped-up
roadsters streaked across Southern California dry lakebeds in a quest for speed and
glory. Those lakebeds eventually became test sites for top secret rocket planes that
set long standing speed records. Now the style that started with those early hot rods
has come full circle. The Rocket Igniter is precision-crafted from A356 aluminum
and topped off with a vintage style aluminum o-ring center cap. The Igniters are
available as cast, with a polished finish, or with a gray painted center with machined
outer finish. The 5-window kidney bean Rocket Igniter hot rod wheel is perfect for
your roadster, gasser, or street rod.
RG156350G 15" x 6" 3.50" backspacing ..................................... 179.99 ea
5 x 4.75" Lug Pattern - Polished Finish
RG156350P
15" x 6" 3.50" backspacing ..................................... 189.99 ea
RG157425P
15" x 7" 4.25" backspacing ..................................... 189.99 ea
RG158375P
15" x 8" 4.50" backspacing ..................................... 199.99 ea
5 x 4.75" Lug Pattern - As-Cast Finish
RG156350A 15" x 6" 3.50" backspacing ..................................... 179.99 ea
RN154225A
RN1510375P
Rocket “Injector” Wheels
RL154225P
RL154225A
Rocket “Launcher” Wheels
Blast down the strip with the Rocket “Launcher”! This is a front-runner 10 spoke
gasser wheel. The 1950s and 1960s were the golden age of drag racing, and the 10
& 12 spoke gasser front runners could be found on everything from run-what-youbrung roadsters to full-blown and supercharged altereds and gassers. Back then,
the 15" x 4" size fronts were only available as spindle mounts on straight axles.
The Rocket “Launcher” preserves the original nostalgic gasser design and perfects
it with a safer 5-lug bolt-on design. The Rocket Launcher is designed, precisioncrafted, and tested to meet or exceed U.S. D.O.T. requirements & SAE standards.
Available as cast, with gray painted center and machined lip, or fully polished.
5 x 4.75" Lug Pattern
RL154225G 15" x 4.5" 2.25" backspacing - gray ........................... 179.99 ea
RL154225P
15" x 4.5" 2.25" backspacing - polished .................... 189.99 ea
RL154225A 15" x 4.5" 2.25" backspacing - as cast ....................... 179.99 ea
248
As soon as Rocket released the Launcher Series “front runner” wheels, they were
overwhelmed by enthusiast demand for a hardcore traditional hot rod wheel that
could be matched with the Launcher for the perfect staggered combo. Rocket's
designers accepted the challenge and created this wheel to revive a classic design
from drag racing's golden age. Reminiscent of the testosterone pumping Fuelie
wheels of the 1960's. Rocket Injector wheels are sculpted to perfection and hold
true to the greatest era of Detroit automotive performance. Available with "as cast"
natural finish or fully polished or in its natural “As-Cast” finish.
5 x 4.75" Lug Pattern - As Cast
RN154225A 15" x 4.5" 2.25" backspacing ..................................... 179.99 ea
RN158375A 15" x 8" 3.75" backspacing ..................................... 189.99 ea
5 x 4.75" Lug Pattern - Polished
RN154225P
15" x 4.5" 2.25" backspacing ..................................... 189.99 ea
RN158375P
15" x 8" 3.75" backspacing ..................................... 199.99 ea
RN158450P
15" x 8" 4.50" backspacing ..................................... 199.99 ea
RN1510300P 15" x 10" 3.00" backspacing ..................................... 209.99 ea
RN1510375P 15" x 10" 3.75" backspacing ..................................... 209.99 ea
RV177425G
RR2002C
RR2002P
Replacement Dome Wheel Center Caps
These vintage style cast aluminum center caps from Rocket Racing Wheels perfectly
match the Rocket Racing Wheel Booster, Fuel, Igniter, Velocity and Launcher wheel
designs. Replaces the stock wheel center caps and are available with a polished
or chrome finish.
RR2002C
chrome ............................................................................ 29.99 ea
RR2002P
polished .......................................................................... 24.99 ea
RV177425S
RV177425C
Rocket “Velocity” Wheels
Give your ride a look that screams speed even when you're in park with a set of
Rocket “Velocity” wheels. This one piece alloy wheel offers a blend of traditional
and classic style and features a traditional lip and split spoke design that accentuates
performance brake systems. Unlike polished wheels that require constant maintenance
and elbow grease, the Rocket Velocity is available in durable chrome and painted
finishes that offer easy, low maintenance care. When the wheels get dirty, simply
hose them off and towel dry.
RV177425G 17" x 7" 4.25" backspacing ..................................... 239.99 ea
RV178450G 17" x 8" 4.50" backspacing ..................................... 249.99 ea
5 x 4.75" Lug Pattern - Hyper Silver with Machined Outer
RV177425S
17" x 7" 4.25" backspacing ..................................... 239.99 ea
RV178450S
17" x 8" 4.50" backspacing ..................................... 249.99 ea
5 x 4.75" Lug Pattern - All Chrome
RV177425C
17" x 7" 4.25" backspacing ..................................... 339.99 ea
RV178450C
17" x 8" 4.50" backspacing ..................................... 344.99 ea
RR2000P
RR2001C
RS156325A
RS156325P
Rocket “Strike” Wheels
Fire first with the Rocket Strike! Rocket’s designers have done it again and brought
this great looking classic single-rib style 5-spoke wheel from the 60’s into the 21st
century! The Strike offers timeless traditional styling that's sure to compliment any
hot rod or muscle car, whether you’re planning to cruise the boulevard or hit the
drag strip. Precision-crafted from A356 aluminum and topped off with a vintage
style aluminum o-ring center cap, the Rocket Strike creates an awesome vintage
drag look. Available in a natural "as-cast" look with machined outer lip for a hard
core drag look, or fully polished for a boulevard cruiser look.
5 x 4.75" Lug Pattern - As Cast with Machined Outer Lip
RS156325A
15" x 6" 3.25" backspacing ..................................... 179.99 ea
RS157425A
15" x 7" 4.25" backspacing ..................................... 179.99 ea
RS158400A
15" x 8" 4.00" backspacing ..................................... 189.99 ea
RS158450A
15" x 8" 4.50" backspacing ..................................... 189.99 ea
5 x 4.75" Lug Pattern - Polished Finish
RS156325P
15" x 4.5" 2.25" backspacing ..................................... 189.99 ea
RS157425P
15" x 8" 3.75" backspacing ..................................... 189.99 ea
RS158400P
15" x 8" 4.50" backspacing ..................................... 199.99 ea
RS158450P
15" x 10" 3.00" backspacing ..................................... 199.99 ea
OER® Secret Formula Guardian Wheel Wax
OER® Guardian Wheel Wax is formulated to safely and
d
effortlessly clean, shine, protect and prolong all types
of wheels and wheel finishes. Wheel Guard delivers
a high gloss durable wet shine finish on all chrome,
aluminum, stainless, powder coated, and even painted
wheels. Clean, polish, shine, protect and prolong in onee
easy step. Extremely easy to use and apply, utilizing
accurate micro-size synthetic beads that gently and
effortlessly lift and polish away oxidation and road
film from wheels to guarantee a scratch free perfect surface. Guardian not only
enhances shine, it protects your investment. Harmful degreasers and acids can
damage wheels reducing shine and causing premature oxidation and deterioration
of wheel. Guardian is an acrylic sealant that bonds instantly to protect against brake
dust, heat, acid raid, water spots, airborne fallout and road contaminants.
K89486
8 oz. jar .......................................................................... 18.99 ea
249
Knockoff Wheel Spinner
Rocket's vintage style knockoffs are just the thing to finish off your set of Rocket
wheels. These wheel spinners fit all Rocket Racing wheels from the Fuel, Booster,
Igniter, Launcher, Velocity, Strike and Injector wheel series. Choose from a polished
or chrome knockoff spinners to match your wheel finish. Supplied with threaded
adapters and sold in pairs (1 left & 1 right hand thread), allowing you to mix and
match according to offset. For vehicles that run staggered wheels, order one pair
of flat and one pair of deep angle spinners. High offset wheels and wheels 15" x 6"
or narrower should run flat angle spinners.
Chrome
RR2000C
flat angle spinners .......................................................... 119.99 pr
RR2001C
deep angle spinners........................................................ 119.99 pr
Polished
RR2000P
flat angle spinners .......................................................... 99.99 pr
RR2001P
deep angle spinners........................................................ 99.99 pr
Custom Wheels
OER® Secret Blue
Tire & Wheel Cleaner
SW177541
SW177542
Showwheels Aluminum Wheels
Looking for a wheel upgrade for your classic ride? Look no further. Showwheels
Streeters are one of the best looking muscle car wheels available. They have the
deep lip look of modern car wheels, for your classic. Available with gray centers or
fully polished, in 17, 18 and 20 inch diameters. Comes complete with caps (chrome
metal, hex head screw on) and chrome lug nuts.
Item #
Size
Gray Center
SW177541 17 x 7
SW178541 17 x 8
SW187541 18 x 7
SW188541 18 x 8
SW208541 20 x 8.5
Polished Center
SW177542 17 x 7
SW178542 17 x 8
SW187542 18 x 7
SW188542 18 x 8
SW208542 20 x 8.5
Bolt Pattern
Offset
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
+6mm
0mm
+6mm
0mm
+12mm
Backspacing
4.25"
4.5"
4.25"
4.5"
5.25"
164.99 ea
164.99 ea
184.99 ea
184.99 ea
234.99 ea
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
+6mm
0mm
+6mm
0mm
+12mm
4.25"
4.5"
4.25"
4.5"
5.25"
184.99 ea
184.99 ea
204.99 ea
204.99 ea
254.99 ea
I
Cragar S/S Super Sport Wheels
The Cragar S/S wheel was first
introduced in 1964. By 1974 the
Cragar S/S had become one of
the most popular wheels of
the muscle car era. Because
it was chrome plated rather
than polished aluminum, it
held its shine and was easy
to keep clean. Instead of
requiring time-consuming
polishing, the Cragar S/S
was ready to show with
a simple hosing off and
wiping down. Available
in a variety of sizes and
configurations, these wheels are
now back in vogue with muscle
car enthusiasts who prefer a custom
look, but wish to keep their car “period
correct”. Chrome aluminum center cap is
included with each wheel. Lug nuts sold separately.
Size
Bolt Pattern
61614
61714
61814
8415
61615
61715
61815
61015
617734
617834
617834P
617934
617934P
14" x 6"
14" x 7"
14" x 8"
15" x 4.5"
15" x 6"
15" x 7"
15" x 8"
15" x 10"
17" x 7"
17" x 8"
17" x 8"
17" x 9"
17" x 9"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
250
Offset
-3mm
3mm
-6mm
-19mm
3mm
3mm
-6mm
-32mm
-12mm
-25mm
0mm
-12mm
12mm
Secret Weapon Polish Ball
The Secret Weapon Polish Ball bends and
compresses enabling it to fit into tight spaces
and make the cleaning and polishing of
difficult, hard to reach areas like wheels, rims
and other metal work much easier. Can be
attached to any hand held drill or drill-like
device for fast and superior cleaning and
polishing. Great for cleaning and buffing small
items like mirrors, headlight lenses and trim
parts. Space-age Dura-foam and fiber-soft
materials make it the most durable tool of
its kind. Comes in your choice of two sizes,
a 3-inch and 4-inch ball. Ideal for use with your favorite wax, polish, wheel
product or compound.
K89490
3 inch polish ball................................................................ 27.99 ea
K89491
4 inch polish ball................................................................ 29.99 ea
WK26
Mag Lug Nut Sets For 14" & 15" Cragar S/S 61 Series Wheels
Item #
Unlike many alternative
products, OER® Secret
Blue dissolves grime
and brake dust without
damaging your chrome
and alloy wheels. It’s
a highly effective
wheel cleaner that can
also double as a high
quality degreaser to
safely remove brake
dust, oxidation, dirt oil
and grime. This is a
factory approved way to
remove brake dust safely
and effectively. The
product can be diluted
7:1 or used in more
concentrated levels for
K89484
K89485
heavier deposits. Makes
painted wheels shine like new. Non-acidic, spray-on wipe-off formula with no
scrubbing necessary and no harsh scent.
K89484
16 oz bottle ........................................................................ 8.99 ea
K89485
1 gallon .............................................................................. 19.99 ea
Backspacing
3-3/8"
4-1/8"
4-1/4"
2"
3-3/8"
4-1/8"
4-1/4"
4-1/4"
3-1/2"
3-1/2"
4-1/2"
4-1/2"
5-1/2"
Cragar Classic Wheels
199.99
199.99
199.99
219.99
199.99
199.99
199.99
229.99
339.99
289.99
289.99
299.99
299.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Lug nut sets WK25-WK26 include: 20 SS mag lug nuts, 20 center-drilled and 20
offset-drilled Cragar mag washers, 1 lock set and 4 valve stems. For all 14" & 15"
Cragar S/S wheels.
WK25
7/16" SS mag lugs ................................................................. 39.99 set
WK26
1/2" SS mag lugs ................................................................... 39.99 set
WK29
Acorn Lug Nut Sets For 16" & 17" Cragar S/S 61 Series Wheels
Lug nut sets WK29-WK30 include: 20 ET flanged acorn lug nuts, 1 lock set and 4
valve stems. Designed to mount all 16" & 17" Cragar S/S wheels.
WK29
7/16" ET flanged acorn lugs.................................................. 39.99 set
WK30
1/2" ET flanged acorn lugs.................................................... 39.99 set
Classic Wheels
Cragar 32 Series Keystone Klassics
Cragar 390 Street Pro
The style of the Cragar Street Pro
is reminiscent of the Halibrand
Sprint which was made famous
on the circle track cars of the
60s. The similarities stop there,
however. Unlike the Halibrand
which was made of magnesium
and required constant polishing
to retain its shine, the Cragar
street pro is manufactured of a
chrome plated steel rim with a
chrome plated aluminum center.
They clean up easily and retain
their shine with a simple hosing
off and wiping down. The price of
original 60s era Halibrands has been pushed
up by collectors and the new Halibrand wheels are
also very pricey. So, if you’d like the look of a legend at about 1/4 of the price,
the Cragar Street Pro is definitely the way to go. Chrome aluminum center cap is
Item #
Size
Bolt Pattern
3905605
3905705
3905805
3905105
3907805
3907805P
3907905
3907905P
15" x 6"
15" x 7"
15" x 8"
15" x 10"
17" x 8"
17" x 8"
17" x 9"
17" x 9"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
Offset Backspacing
-28mm
-12mm
-6mm
-32mm
-25mm
-6mm
-12mm
6mm
2-5/8"
3-1/2"
4-1/4"
4-1/4"
3-1/2"
4-1/4"
4-1/2"
5-1/4"
If your car is a 1950-70s model,
chances are it came with
narrow wheels and tiny bias
ply tires. By the mid 1960s,
aftermarket wheel swaps were
commonplace among car
enthusiasts. One of the most
widely chosen aftermarket
wheels available during
the muscle car era was the
Cragar Keystone Klassic.
Popular for their composite
design, the chrome plating
on the Keystone Klassics
made them much easier to clean
than aluminum or mag wheels
because they required no polishing.
Cleaning them was a breeze by just
hosing them down and wiping them off. These
wheels are now back in vogue with muscle car enthusiasts who prefer a custom
look, but wish to keep their car “period correct”. Chrome aluminum center cap is
189.99
189.99
189.99
199.99
239.99
239.99
249.99
249.99
ea
ea
ea
ea
ea
ea
ea
ea
Item #
325799
325899
Size
15" x 7"
15" x 8"
Bolt Pattern
5 x 4.5", 4.75", 5"
5 x 4.5", 4.75", 5"
Offset Backspacing
-6mm 3-3/4"
-16mm 3-7/8"
219.99 ea
219.99 ea
Mag Lug Nut Sets For 32 Series Keystone Classic Wheels
Lug nut sets include: 20 SS mag lug nuts, 20 center-drilled and 20 offset-drilled
Keystone mag washers, 1 lock set and 4 valve stems.
WK38
7/16" SS mag lugs ................................................................. 39.99 set
WK39
1/2" SS mag lugs ................................................................... 39.99 set
Smoothie Wheels
Note: Shipped overweight. .
Item #
Item #
3134605P
3134705
3135605P
3135705P
3135805
3135105
090952
390SK
9090
KC0271
Replacement Center Caps and Spinners
Replace your missing or damaged center cap with an original Cragar cap or dress
up your Cragar wheels with a new set of Cragar spinner caps.
Spinner
090952
for S/S wheel (with Cragar S/S logo) ................................. 49.99 pr
Replacement Center Cap
390SK
for Street Pro wheel (with base and spinner)...................... 84.99 ea
9090
for S/S wheel (with Cragar S/S logo) ................................. 19.99 ea
KC0271
for Keystone Klassic wheel ................................................ 19.99 ea
Size
Size
Bolt Pattern
Bolt Pattern
14" x 6"
14" x 7"
15" x 6"
15" x 7"
15" x 8"
15" x 10"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
5 x 4.5", 4.75"
Offset
Offset
7mm
0mm
7mm
3mm
-15mm
-38mm
Backspacing
Backspacing
3-3/4"
4"
3-3/4"
4-1/8"
3-7/8"
4"
89.99
99.99
99.99
109.99
109.99
139.99
ea
ea
ea
ea
ea
ea
Lug Nut Sets for
Smoothie Wheels
Classic Industries® now
offers a lug kit for your
smoothie wheels. A
perfect kit to purchase if
your lug nuts are stripped,
worn out or rusted. All
sets include: 16 lug nuts,
WK1
4 valve stems, 4 wheel
locks and a key.
WK1
7/16"-20 thread ..................................................................... 39.99 set
WK2
1/2"-20 thread ....................................................................... 39.99 set
Cragar Classic Wheels
251
Lug Nut Sets For 390 Street Pro Wheels
All lug nut sets listed below include: 20 OE flanged lug nuts, 1 lock set and 4
valve stems.
WK12
7/16" OE flanged lugs ........................................................... 39.99 set
WK13
1/2" OE flanged lugs ............................................................. 39.99 set
The ultimate nostalgic wheel, the
chrome smoothie provides a
look like no other. It is often
used with whitewalls and
baby moons. A chrome moon
center cap is included with
each wheel, but with a little
ingenuity, this wheel can
provide many different looks
for your vehicle. Available in a
variety of different sizes. These
are dual bolt pattern wheels to
accomodate two different bolt
patterns. Lug nuts sold separately.
American Racing Wheels
TTO Alloy Wheels
Torq-Thrust D
This classic design from American Racing Wheels burst on the scene way back in
1965 and became the most famous custom wheel of all time. The one-piece, alloy,
5-spoke design is a timeless classic. Get a true nostalgic look when adding a set of
these precision-machined beauties. Center cap included.
Item #
TT4661
TT5461
TT5661
TT5761
TT5861
TT5161
TT6861
Size
Bolt Pattern
14" x 6"
15" x 4.5"
15" x 6"
15" x 7"
15" x 8.5"
15" x 10"
16" x 8"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
Backspacing
-2mm
-15mm
+4mm
-6mm
-24mm
-44mm
-12mm
3-3/8"
2-1/8"
3-5/8"
3-3/4"
3-3/4"
3-3/4"
4"
This original straight spoke version of the Torq-Thrust is an icon of vintage and
muscle cars throughout America. The TTO was originally offered in 1956 and quickly
became the most sought after design of its time. Includes center cap.
Item #
Size
TTO5765
TTO58561
15" x 7"
15" x 8.5"
Bolt Pattern
Offset
Backspacing
5 x 4.75"
5 x 4.75"
-6mm
-24mm
3-3/4"
3-3/4"
204.99 ea
224.99 ea
189.99 ea
199.99 ea
189.99 ea
209.99 ea
219.99 ea
239.99 ea
239.99 ea
Torque Thrust Ii Polished Alloy
A classic 5-spoke design with a modern flair. This handsome 2-piece alloy wheel
comes fully polished and features a spoke design that is more tapered, creating a
wider viewing area to unveil the disc-brake stopping power behind your Chevy.
Many sizes to choose from. Includes center cap.
I
Torq-Thrust D Chrome
This classic design from American Racing Wheels, burst on the scene way back
in 1965 and became the most famous custom wheel of all time. The one-piece,
5-spoke design is a timeless classic. Get a true nostalgic look when adding a set of
these precision machined beauties. Includes center cap.
Item #
Size
TT4661C
TT5661C
TT5861C
TT6861C
14" x 6"
15" x 6"
15" x 8.5"
16" x 8"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
Backspacing
-2mm
+4mm
-24mm
-12mm
3-3/8"
3-5/8"
3-3/4"
4"
274.99 ea
299.99 ea
309.99 ea
339.99 ea
Size
14" x 6"
14" x 7"
15" x 6"
15" x 7"
15" x 8"
15" x 10"
16" x 7"
16" x 8"
16" x 8"
17" x 7"
17" x 8"
17" x 8"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
-2mm
0mm
-2mm
-5mm
-18mm
-44mm
0mm
+8mm
-11mm
0mm
-11mm
+8mm
Backspacing
3-3/8"
4"
3-3/8"
3-3/4"
3-3/4"
3-3/4"
4"
4-3/4"
4"
4"
4"
4-3/4"
209.99 ea
219.99 ea
214.99 ea
219.99 ea
239.99 ea
259.99 ea
239.99 ea
244.99 ea
244.99 ea
284.99 ea
289.99 ea
289.99 ea
FRE
Whe
el
WithLocks
&
pu
Rally rcha Valve
Whese of Stem
s
el Ki any
t!
E!
CC501
CC502
Authorized American Racing Center Caps
Now from American Racing! The most popular custom wheels for classic muscle
cars are now available with logo center caps or spinners.
CC501
Louisville Hollow Point (set of 4) ..................................... 69.99 set
CC502
Carlisle Tri-Bar Spinner ..................................................... 129.99 ea
252
Item #
TT24665
TT24761
TT25661
TT25761
TT25861
TT25161
TT26761
TT26863
TT26861
TT27761
TT27861
TT27863
Don’t Forget The Wheel Hardware!
Classic Industries® now offers a lug nut set for your American Racing wheels. A
perfect set to purchase when mounting new American Racing wheels to your vehicle
or when your current lug nuts are stripped, worn out or missing. All sets include:
20 lug nuts, 4 valve stems, 4 wheel locks and a key.
WK4
7/16"- 20 thread .................................................................. 39.99 set
WK5
1/2"- 20 thread .................................................................... 39.99 set
Alloy Salt Flat Special
This 2-piece wheel will give your vehicle a vintage look reminiscent of the old
Halibrand “kidney bean” wheels that first gained popularity with racers in the 1960’s.
Available in many different sizes. This wheel’s center is painted in a magnesium
gray with a polished outer rim. Includes center cap.
Item #
Size
SF5661
SF5761
SF5861
SF5161
SF6761
SF6861
SF7761
SF7861
15" x 6"
15" x 7"
15" x 8"
15" x 10"
16" x 7"
16" x 8"
17" x 7"
17" x 8"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
-2mm
-5mm
-18mm
-44mm
0mm
-12mm
0mm
-12mm
Backspacing
3-1/4"
3-3/4"
3-3/4"
3-3/4"
4"
4"
4"
4"
Classic 200S - Daisy Wheel
One of the most popular wheels ever made by American Racing Equipment was
the 200S, also known as the “Daisy Wheel”. These wheels were originally cast at
a foundry in Portland, Oregon until the late 1970’s. The Daisy Wheel is a great
alternative to the more common Torque Thrust wheel. Includes center cap.
274.99 ea
274.99 ea
284.99 ea
309.99 ea
284.99 ea
294.99 ea
344.99 ea
354.99 ea
Item #
Size
TS5861
TS5161
TS7761
TS7861
TS7863
15" x 8"
15" x 10"
17" x 7"
17" x 8"
17" x 8"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
Backspacing
-12mm
-38mm
0mm
-12mm
+14mm
4"
4"
4"
4"
5"
294.99 ea
309.99 ea
359.99 ea
359.99 ea
341.99 ea
Classic 200S Polished Daisy
One of the most popular wheels ever made by American Racing Equipment was
the 200S, also known as the “Daisy Wheel”. These wheels were originally cast
at a foundry in Portland, Oregon until the late 1970s. The Daisy Wheel is a great
alternative to the more common Torque Thrust wheel. Includes center cap.
Polished Alloy.
Item #
Size
SF5661P
SF5761P
SF5861P
SF5161P
SF6761P
SF6861P
SF7761P
SF7861P
15" x 6"
15" x 7"
15" x 8"
15" x 10"
16" x 7"
16" x 8"
17" x 7"
17" x 8"
Bolt Pattern
Offset
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
-2mm
-5mm
-18mm
-44mm
0mm
-12mm
0mm
-12mm
Backspacing
3-1/4"
3-3/4"
3-3/4"
3-3/4"
4"
4"
4"
4"
274.99 ea
274.99 ea
284.99 ea
309.99 ea
284.99 ea
294.99 ea
344.99 ea
354.99 ea
The Hopster Polished Alloy
If you want a stylish look on your vehicle you
simply must purchase a set of Hopster wheels.
These polished alloy wheels will give any
vehicle a retro look, and all the heads will be
turning as you roll by in unparalleled style. Sold
individually. Includes center cap.
Item #
Size
TH5661
TH5761
TH5861
TH5161
TH6761
TH6863
TH7761
TH7861
TH7863
15" x 6"
15" x 7"
15" x 8"
15" x 10"
16" x 7"
16" x 8"
17" x 7"
17" x 8"
17" x 8"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
Backspacing
-2mm
-5mm
-18mm
-44mm
0mm
+8mm
0mm
-11mm
+8mm
3-1/4"
3-3/4"
3-3/4"
3-3/4"
4"
4-3/4"
4"
4"
4-3/4"
209.99 ea
224.99 ea
239.99 ea
259.99 ea
239.99 ea
229.99 ea
284.99 ea
289.99 ea
289.99 ea
Item #
Size
TS5861P
TS5161P
TS7761P
TS7861P
TS7863P
15" x 8"
15" x 10"
17" x 7"
17" x 8"
17" x 8"
Bolt Pattern
Offset
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
5 x 4.75"
-12mm
-38mm
0mm
-12mm
+14mm
Backspacing
4"
4"
4"
4"
5"
294.99 ea
309.99 ea
359.99 ea
359.99 ea
341.99 ea
The American Racing Outlaw
In the 1980’s the modular wheel became the hot ticket
on any late 70’s or 80’s muscle car. The wheels were
called modular because they consisted of three
elements; an aluminum wheel center (in
various styles), an inner rim and an outer rim.
The combination of these “modules” allowed
for an unlimited range of possibilities when
it came to wheel specifications. The true
modulars, however, where a bit pricey for
the average Joe. This soon led to an influx of
modular copies and 1-piece wheels built with
a modular look. This modular style wheel,
manufactured by American Racing, is a 1-piece
machined alloy wheel with a modular look. It comes
clear coated and includes center cap. Ideal if you’re looking
for a period-correct wheel design at a great price.
Item #
Size
OL4761
OL5761
OL5161
14" x 7"
15" x 7"
15" x 10"
Bolt Pattern
5 x 4.75"
5 x 4.75"
5 x 4.75"
Offset
Backspacing
0mm
-6mm
-38mm
4"
3-3/4"
4"
99.99 ea
119.99 ea
124.99 ea
253
Alloy Salt Flat Special Polished
This 2-piece wheel will give your vehicle a vintage look reminiscent of the old
Halibrand “kidney bean” wheels that first gained popularity with racers in the
1960’s. Available in many different sizes. This wheel’s center is polished with a
polished outer rim. Includes center cap.
Firestone™ Wide Oval Tires
Tire Size Quick Reference Chart
Firestone Wide “O” Oval tires are back! These tires are manufactured
from the original molds to bring you the highest quality muscle car tire
available. These tires were installed by General Motors on many popular
muscle cars from 1967 through 1974. Each tire features a 2+2 construction
(2-ply polyester and 2-ply fiberglass). Available in Raised White Lettering,
featuring the words Firestone and Wide “O” Oval, Red Lines or pinstripe
whitewall. After all, if you’re going to invest hard-earned money in new
tires, why not increase the value of your Nova by installing original style
reproduction Firestone tires? You can see the difference!
Note: Tires must be pre-paid. Special shipping rate applies. Discount exempt.
I
Exact Reproduction of the original Firestone® Tires
Manufactured from original molds!
Three styles to choose from!
Produced in the USA!
Large Inventory for Fast Delivery!
Classic Industries® now offers a convenient way to verify exactly what size tire you
can mount onto your specific car! This chart allows you, the car owner, to crossreference the original tire size (listed in the owners manual of your vehicle) with
today’s “modern” metric-sizing. No more guessing!
Pre 64
65-72
80 series
metric
alpha numeric
78 series
P metric
75 series radial
P metric
70 series radial
590-13
640-13
725-13
590-14
650-14
700-14
750-14
800-14
850-14
590-15
650-15
640-15
670-15
710-15
760-15
800-15
820-15
600-13
650-13
700-13
645-14
695-14
735-14
775-14
825-14
855-14
600-15
685-15
735-15
775-15
815-15
855-15
885-15
900-15
165-13
175-13
185-13
155-14
175-14
185-14
195-14
205-14
215-14
165-15
175-15
185-15
195-15
205-15
215-15
230-15
235-15
A78-13
B78-13
D78-13
B78-14
C78-14
E78-14
F78-14
G78-14
H78-14
A78-15
C78-15
E78-15
F78-15
G78-15
H78-15
J78-15
L78-15
P165/75R13
P175/75R13
P185/75R13
P175/75R14
P185/75R14
P195/75R14
P205/75R14
P215/75R14
P225/75R14
P165/75R15
P175/75R15
P195/75R15
P205/75R15
P215/75R15
P225/75R15
P225/75R15
P235/75R15
P175/70R13
P185/70R13
P205/70R13
P185/70R14
P195/70R14
P205/70R14
P215/70R14
P225/70R14
P235/70R14
P175/70R15
P185/70R15
P205/70R15
P215/70R15
P225/70R15
P235/70R15
P235/70R15
P255/70R15
SPECIAL
SHIPPING!
Part Number
T54640
T54650
T54670
T54680
T54850
T54860
T55250
T55260
T62530
T62450
T62460
T62510
T62520
T62480
T54690
T54870
T55270
T54660
T62470
T62500
254
Tire Size
D70 x 14
D70 x 14
E70 x 14
E70 x 14
F70 x 14
F70 x 14
G70 x 14
G70 x 14
E70 x 15
F70 x 15
F70 x 15
G70 x 15
G70 x 15
F60 x 15
E70 x 14
F70 x 14
G70 x 14
D70 x 14
F70 x 15
G70 x 15
Description
raised white letter
pinstripe
raised white letter
pinstripe
raised white letter
pinstripe
raised white letter
pinstripe
raised white letter
raised white letter
pinstripe
raised white letter
pinstripe
raised white letter
red line (wide track)
Firestone Tires
Tread Width Cross Sect Outer Dia.
6.21"
6.21"
6.38"
6.38"
6.67"
6.67"
6.92"
6.92"
6.00"
6.71"
6.71"
6.50"
6.50"
8.75"
6.38"
6.67"
6.92"
6.21"
6.71"
6.50"
7.85"
7.85"
8.05"
8.05"
8.30"
8.30"
8.75"
8.75"
8.30"
8.35"
8.35"
8-1/20"
8-1/20"
9.20"
8.05"
8.30"
8.75"
7.85"
8.35"
8-1/20"
25.32"
25.32"
25.76"
25.76"
26.24"
26.24"
26.82"
26.82"
26.60"
26.94"
26.94"
27.50"
27.50"
25.94"
25.76"
26.24"
26.82"
25.32"
26.94"
27.50"
Price
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
Sport car 200 ...............................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
.....................................................................................................................
209.99 ea
209.99 ea
209.99 ea
209.99 ea
209.99 ea
209.99 ea
229.99 ea
229.99 ea
274.99 ea
239.99 ea
239.99 ea
239.99 ea
239.99 ea
289.99 ea
209.99 ea
209.99 ea
229.99 ea
209.99 ea
239.99 ea
259.99 ea
Goodyear® Polyglas Tires
Give your Tri-Five a nostalgic appearance by
replacing your tires with original Goodyear® quality!
Goodyear® is the tire Chevrolet chose for many
late model 1960’s and early model 1970’s high
performance vehicles. Goodyear® is a registered
trademark of The Goodyear Tire Corporation.
O Perfect for your Tri-Five Chevy!
®
The Goodyear name means quality
E and dependability!
Increase the value of your project
M while maintaining originality!
Goodyear® is known throughout the automotive industry as one of the finest quality
tires manufactured! Now, Goodyear® proudly offers these high quality replacements
produced using the original molds for authenticity and quality! The Goodyear tires
are produced with exact specifications offering the highest quality while maintaining
complete originality! Many Chevrolet late 1960’s and early 1970’s muscle cars and
high performance vehicles included the Goodyear® raised white letter Polyglas or
Redine Polyglas tires. Make your project complete by adding the one item that so
many restorers neglect. Vintage style tires are a great investment and increase the
value of your classic! Now you can own the original Polyglas Goodyear® tires,
and because they are made from the same molds as the originals, you can count
on their Goodyear® quality. Perfect for classic wheel types such as Rally wheels!
Although these Polyglas tires were standard equipment for various Chevrolet high
performance vehicles of the late 1960’s and early 1970’s, they can be easily installed
on virtually any early model Chevrolet to add a touch of nostalgia.
Note: Tires must be pre-paid. Shipped overweight. Discount exempt.
Part Number
Tire Size
Style
Description
GYE7014
GYF7014
GYE7015W
GYF7015
GYF6015
GYG6015
GYG7015
E70/14
F70/14
E70/15
F70/15
F60/15
G60/15
G70/15
Raised White Letter
Raised White Letter
Raised White Letter
Raised White Letter
Raised White Letter
Raised White Letter
Raised White Letter
2/2 Polyglas ...............................................................................................................................................
2/2 Polyglas ...............................................................................................................................................
QW-1 4 Ply Poly........................................................................................................................................
2/2 Polyglas ...............................................................................................................................................
2/2 Polyglas GT .........................................................................................................................................
2/2 Polyglas GT .........................................................................................................................................
2/2 Polyglas GT .........................................................................................................................................
Price
209.99 ea
219.99 ea
289.99 ea
239.99 ea
259.99 ea
279.99 ea
279.99 ea
Important: QW-1 Speedway Wide Tread.
Classic Radial Tires
Classic Redline Radial Tires
Classic Industries® now offers reproduction whitewall
radial tires designed to give the appearance of an original
tire. Each tire is new and offers a great
way to retain originality.
Classic Industries® is pleased to
offer these reproduction style redline
radial tires designed to give the
appearance of an original tire. Each
tire is new and offers a great way to
retain originality.
Note: Wheel not included. Tires are special order and
must be pre-paid. Shipped overweight. Discount
exempt.
Note: Wheel not included. Tires must be pre-paid. Shipped
overweight. Discount exempt.
part#
belt
plies
P19575R14R
P20575R14R
P20575R15R
P23575R15R
part#
construction load capacity
tread section diameter
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
5.48"
5.68"
6.04"
5.68"
6.24"
6.58"
1400@ 35 psi
1532@ 35 psi
1797@ 35 psi
1598@ 35 psi
1874@ 35 psi
2028@ 35 psi
tread section diameter
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
5.48"
5.68"
5.68"
6.58"
1400@ 35 psi
1532@ 35 psi
1598@ 35 psi
2028@ 35 psi
7.96"
8.14"
8.14"
9.41"
25.51" ......
26.11" ......
27.11" ......
28.91" ......
price
189.99
244.99
219.99
219.99
ea
ea
ea
ea
OER® Secret Blue Tire & Wheel Cleaner
radial
plies
P19575R14W
P20575R14W
P22575R14W
P20575R15W
P22575R15W
P23575R15W
construction load capacity
7.96"
8.14"
8.78"
8.14"
8.95"
9.41"
25.51" ...
26.11"....
27.62" ...
27.11"....
28.29" ...
28.91" ...
price
189.99
244.99
229.99
219.99
229.99
219.99
ea
ea
ea
ea
ea
ea
Unlike many alternative products, OER® Secret
Blue dissolves grime and brake dust without
damaging your chrome and alloy wheels. It’s a
highly effective wheel cleaner that can also double
as a high quality degreaser to safely remove brake
dust, oxidization, dirt oil and grime. The product
can be diluted 7:1 or used in more concentrated
levels for heavier deposits, the choice is yours.
Non-acidic, spray-on wipe-off formula with no
scrubbing necessary and no-harsh scent.
K89484
16 oz. bottle ....................................................................... 8.99 ea
K89485
1 gallon .............................................................................. 19.99 ea
Goodyear Polyglas . Radial Tires
255
Classic Whitewall Radial Tires
BFGoodrich® Tires
BFGoodrich Silvertown Radial Tires
BFGoodrich Radial T/A Tires
Classic Industries® offers these reproduction BFGoodrich Radial T/A tires for
various classic American cars. Each tire is manufactured to original specifications,
is S-Speed rated and US DOT approved for us e on all US highways. With its grippy
all-season tread design and original style raised white letters, these tires will give
both authenticity and safety to your classic car.
Classic Industries® offers these reproduction BFGoodrich Radial T/A tires for
various classic American cars. Each tire is manufactured to original specifications,
is S-Speed rated and US DOT approved for us e on all US highways. With its grippy
all-season tread design and original style raised white letters, these tires will give
both authenticity and safety to your classic car.
14 & 15 inch rim
diameters available
70 series available
S speed rated (112 mph)
All season tread
High tech tread design
Backed by our life of the
tread warranty
US DOT - approved for all
US highways
ECE approved - meets or
exceeds all requirements
for the European
community
Made in the USA
14 & 15 inch rim diameters
S Speed rated (112 mph)
US DOT approved for all US highways
ECE approved - meets or exceeds all
requirements within the European
community
All season tread design
Note: Wheel not included. Tires must be pre-paid.
Shipped overweight. Discount exempt.
I
Note: Wheel not included. Tires must be pre-paid.
Shipped overweight. Discount exempt.
Tire Size
Description
Constr.
Tread Section Diam.
Price
P20570R14RL
P21570R14RL
P22570R14RL
P21570R15RL
P22570R15RL
P23570R15RL
P21570R14WL
P21570R15WL
P22570R15WL
3/8" - Redline
3/8" - Redline
3/8" - Redline
3/8" - Redline
3/8" - Redline
3/8" - Redline
3/8" - Whiteline
3/8" - Whiteline
3/8" - Whiteline
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
Poly/Steel
5.80"
6.40"
6.70"
6.40"
6.70"
7.080"
6.40"
6.40"
6.70"
234.99
239.99
249.99
239.99
249.99
259.99
239.99
259.99
289.99
8.00"
8.70"
8.90"
8.70"
9.00"
9.50"
8.70"
8.70"
9.00"
26.10" .
25.90" .
26.30" .
26.90" .
27.40" .
28.00" .
25.90" .
26.90" .
27.40" .
ea
ea
ea
ea
ea
ea
ea
ea
ea
KG003
KG005
KG007
Tire Storage Solutions
Store your tires with care and ease with these tire storage solutions for various
applications. The Tire Garage allows you to keep tires outside with a rugged
weatherproof shell made from the same material used to make awnings and boat
covers. The Seasonal Tire Tote provides mobile protection for your seasonal tires.
Features a heavy duty shell and easy to carry handles. They are also easily stackable.
Tire Tote Wheel Felts slide into the tire tote and clip into place to protect wheels
from scratches and nicks.
KG005
Tire Garage one size fits all........................................... 39.99 ea
KG003
Tire Tote
one size fits all........................................... 16.99 pr
KG007
Wheel Felts 20" diameter .............................................. 12.99 pr
256
BFGoodrich Tires
Tire Size
Description
Constr.
Tread Section Diam.
Price
P20570R14T
P21560R14T
P21570R14T
P22560R14T
P22570R14T
P23560R14T
P24560R14T
P19560R15T
P20560R15T
P21560R15T
P21565R15T
P21570R15T
P22560R15T
P22570R15T
P23560R15T
P23570R15T
P24560R15T
P25560R15T
5.0"-7.0"
6.0"-7.5"
5.5"-7.0"
6.0"-8.0"
6.0"-7.5"
6.5"-8.5"
7.0"-8.5"
5.5"-7.0"
5.5"-7.5"
6.0"-7.5"
6.0"-7.5"
5.5"-7.0"
6.0"-8.0"
6.0"-7.5"
6.5"-8.5"
6.0"-8.0"
7.0"-8.5"
7.0"-9.0"
8.2"
8.7"
8.7"
9.0"
9.0"
9.5"
9.8"
7.9"
8.2"
8.7"
8.7"
8.7"
9.0"
9.0"
9.5"
9.5"
9.8"
10.2"
25.4" ..........................
24.2" ..........................
25.9" ..........................
24.7" ..........................
26.5" ..........................
25.1" ..........................
25.6" ..........................
24.2" ..........................
24.7" ..........................
25.2" ..........................
26.0" ..........................
26.9" ..........................
25.6" ..........................
27.4" ..........................
26.1" ..........................
28.0" ..........................
26.6" ..........................
27.1" ..........................
129.99
114.99
104.99
114.99
124.99
114.99
144.99
99.99
94.99
129.99
114.99
104.99
129.99
119.99
139.99
119.99
124.99
149.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
OER® TNT Extended Life Tire & Trim Dressing
This unique formula quickly penetrates rubber trim and tires
to hydrate and provide lasting protection. TNT Extended
Life gel by OER® finally delivers on that promise. Simply
wipe on using a pad and TNT gel restores the look of faded
tires, trim, bumpers, seals and weatherstrip. What’s more
is that OER® TNT gel lasts for many months not days. Our
exclusive no streak, no run and non drip formula works
to repel water and detergents and helps keep tire walls
hydrated and supple as well as looking brand spanking
new. Prepare your trim for a product unlike any other. A
true premium trim restorer and protectant, that will not drip,
dry out or destroy surfaces. Provides unmatched durability,
ease of application and a superior “new look” shine that
lasts through numerous washes. Non greasy, non tacky and
simply amazing.
K89482
16 oz. bottle ....................................................................... 18.99 ea
Wall Mount Wheel/Tire Hanger
The wheel and tire hanger is a great
way to organize your shop or garage by
getting wheels and tires off the floor,
freeing up more space. Each heavy duty
powder coated hanger is appx. 21" long
and mounts at a slight angle so wheels
won’t slide off. Can also be used to hang
bicycles or anything you want to get off
the floor.
Note: Each hanger will hold 2 wheels with tires mounted.
M998070
wheel/tire hanger ............................................................... 39.99 ea
Tire & Wheel Combos
Bolt them on and go! What could be easier?
When you buy a tire and wheel package from us, you can rest assured that you are
getting the best. These complete sets include four tires of your choice, Chevrolet
Rally Wheels, tall “Derby” style Rally center caps, trim rings, valve stems and lug
nuts...fully mounted and balanced! Your tire and wheel package will be mounted
and balanced by a professional with the latest state of the art Hunter balancing
equipment. For maximum ride quality, our Hunter SmartWeight balancing system
analyzes the entire assembly for non-conformity issues and the result is improved
ride quality, performance and wear. You’ll also receive FREE nitrogen inflation that
will give your combo longer life and better performance. Your combo will arrive
to your front door ready to simply bolt on your vehicle so you can go for a drive.
What could be easier?
Important: Choose tire size and brand from below.
Note: Tire sets must be pre-paid. Shipped overweight. Discount exempt.
CC3002
CC3003
CC3005
Complete Sets Include 4 Tires, Chevrolet Rally Wheels, Tall “Derby” Style Rally Center Caps, Trim Rings, Chrome Valve Stems And Lug Nuts.
Hand Mounted And Computer Balanced To Precise Quality Control Standards For A Guaranteed True And Round Assembly.
Professionally Mounted By Vintage Tire And Wheel Experts Who Understand The Nature Of Classic Tires And Wheels.
Scratch-Less Mounting, No Need To Worry About A Scratched Rim.
Lug Centric Balancing For The Best Balance And Truest Ride.
WHEN YOU PURCHASE
OVER A $100 VALUE
Static Balanced With The Unsightly Weights On The Inside Of The Combo.
TIRES AND WHEELS TOGETHER
Part #
Tire Size
Brand
Wheel Size
Trim Ring
CC3001
CC3002
CC3003
F70-14
F70-14
P215/70R14
Firestone Wide Oval Redline
Firestone Wide Oval RWL
BFG Silvertown Radial Redline
14"x7" Chevrolet Rally
14"x7" Trim Ring set of 4 .............................. 1399.99 set
Price
CC3004
CC3005
P215/70R15
P215/70R15
BFG Silvertown Radial Redline
BFG T/A Radial RWL
Tire & Wheel Combo
257
CC3001

2013 Tri5 Catalog - Classic Industries

Transcription

Similar documents

Tactair Paris Air Show Evite 2015

FREELINE BRAKES - Pg. 1

1-800-874-8926 www.imcparts.com

EradiSpeed Mustang 11x8-5

Rent your mountainbike or comfortable Dutch bike!

BRAKE PAD BEDDING IN PROCEDURE

BPI 01-13 Dragging Brakes On Lifted Trucks

Heretic C SPECS.ai - ECOSSE | Moto works

HD–Series

VRSCDX V-Rod® 10th Anniversary Edition GASSER Wheel